Sebastien PoncetBorn 1-26-1979 in Feurs (42) / Nationality: french / 3 daughters

Mechanical Engineering Department, Universite de Sherbrooke2500 Bd de l’Universite, Sherbrooke (Quebec), J1N 2H6 Canada

Sebastien.Poncet@USherbrooke.caTel : +1 819 821 8000 ext. 62150

Associate professor at Universite de Sherbrooke

Education

2014-: Associate professor at Universite de Sherbrooke in the mechanical engineering department.Holder of the NSERC chair on industrial energy efficiency.

Habilitation thesis from Aix-Marseille University. Study entitled Instabilities, turbulence and heattransfer in confined rotating flows, defended on the 5th of February 2014 at M2P2, Marseilles.Committee members: S. Harmand (Univ. Valenciennes), H. Iacovides (Univ. Manchester), P. Le Gal(CNRS, IRPHE), F. Marques (Univ. Polytech. Catalunya), F. Moisy (Univ. Paris Sud), C. Nore(Univ. Paris Sud), E. Serre (CNRS, M2P2).

2006-now: Assistant Professor at Aix-Marseille University (section 62). Teaching at the Energy andThermal Engineering Department (GTE) of the University Institute of Technology (IUT) in Mar-seilles. Research in the Instability and Turbulence team of the M2P2 laboratory. Starting date the 1stof September 2006 and permanent position since the 1st of September 2007.

2005-06: Lecturer at Paul Cezanne University (Aix-Marseille III).

Oct.2005-Feb.2006: Researcher at IRPHE, financially supported by the group SNECMA Moteurs.

2002-05: PhD thesis from the University of Provence (Aix-Marseille I). Study entitled Rotor-statorflows with superimposed throughflow: from Batchelor to Stewartson, supervisors M.P. Chauve & R.Schiestel (IRPHE-CNRS), obtained with the highest distinction, defended on the 3rd of October 2005at the Institut de Recherche sur les Phenomenes Hors Equilibre (IRPHE), Marseilles.Committee members: C. Cambon (CNRS, LMFA), M.P. Chauve (CNRS, IRPHE), G. Gerolymos(UPMC), J.F. Pinton (CNRS, ENS Lyon), C. Rey (Univ. Aix-Marseille III), R. Schiestel (CNRS,IRPHE)

2001-02: Master in marine environnement sciences with distinctions, University of Toulon.1999-2002: Engineer in physical oceanography at the Institut des Sciences de l’Ingenieur de Toulonet du Var (ISITV), Toulon.

Research activities

Project manager

� NSERC chair on industrial energy efficiency supported by Hydro-Quebec, CanmetEnergie andRio Tinto Alcan (2400 kEuros), 2014-19.

� Project ”MUCIL” supported by ICSTAR, CNRS PEPS, Physio-Assist (21 kEuros), 2014.

1

� Project ”Simeox” supported by Physio-Assist (6 kEuros), 2012-2014.

� Project ”Entrefer moteur” supported by Liebherr Aerospace Toulouse (235 kEuros), 2010-2013.

� Project ”TCPtherm” supported by ICSTAR (30 kEuros), 2010-2011.

Organization committees

� Organization of Colloque 202 on industrial energy efficiency, 8’e Congres de l’ACFAS, Montreal,May 12 & 13, 2016.

� Member of the scientific committee of “International Conference on Heat Transfer DevicesICHTD’16”, Prague, April 4-5, 2016.

� Member of the organization and scientific committees of “Colloque Inter-universitaire Franco-Quebecois sur la Thermique des systemes CIFQ2015, Sherbrooke, 8-10 June 2015.

� Member of the organization committee of “Quels defis energetiques en region PACA?”, IUTGTE, Marseilles, 11 April 2014.

� Member of the scientific committee of “1er Congres International de Physique Numerique”,Oran, 13-15 October 2012.

� Member of the scientific committee of “Colloque franco-allemand ouvert a l’Europe du Nord:Environnement, Risques et Energies Renouvelables”, Ecole Centrale de Marseille, Marseilles, 3-4June 2010.

� Member of the organisation committee of 8th International ERCOFTAC Symposium on Engi-neering Turbulence Modelling and Measurements (ETMM8), Marseilles, 9-11 June 2010.

� Member of the organisation committee of “Congres Francais de Mecanique”, Marseilles, 24-28August 2009.

� Member of the organization committee of “Journee franco-italienne sur la recherche et la cooperation”,Ecole Centrale de Marseille, Marseilles, 19 October 2007.

Collective liabilities

� In charge of the Batchelor degree in the mechanical engineering department at the Universitede Sherbrooke, 2016-.

� Member of the strategic committee on Energy, Universite de Sherbrooke, 2015-.

� Member of the group CREEPIUS, Universite de Sherbrooke, 2014-.

� Member of the piloting committee of the thematic group “Ecoulements et transferts”, InstitutCarnot STAR, 2012-.

� Member of the “Hydrodynamique extreme dans les machines tournantes” action (HYDREX),labex MEC, 2011-.

� In charge of the Batchelor degree (second year and indenture) at the University Institute ofTechnologie in the thermal engineering department, 2010-14.

� Member of the M2P2 laboratory board, 2008-2012.

� In charge of the public relations at the University Institute of Technologie in the thermal engi-neering department, 2006-09.

� Member of the group “Ingenieurs Sans Frontieres” (I.S.F. Riviera), 1999-2002.

2

Honors and Awards

1. Scientific excellence grant from Aix-Marseille University (2013-2017).

2. Best poster award, 18th International Couette-Taylor Workshop ICTW18, Twente, 24-26 June2013.

3. PhD prize of AUM (Activites Universitaires en Mecanique) / AFM (Association Francaise deMecanique), 2007.

4. Research and doctoral supervision grant (2006-2010).

5. PhD prize of the French Section of the American Society of Mechanical Engineers, 2005.

Supervisions

Post-doctorates

1. Adrien Aubert, Experimentation des ecoulements de type Taylor-Couette-Poiseuille et des trans-ferts de chaleur dans l’entrefer moteur d’une ACM, Post-doctorate, co-supervisor with P. Le Gal(IRPHE), 2011-2012. Financially supported by Liebherr Aerospace.

2. Raphael Guillerm, Simulation et modelisation des ecoulements de type Taylor-Couette-Poiseuilleet des transferts de chaleur dans l’entrefer moteur d’une ACM, Post-doctorate, co-supervisorwith P. Le Gal (IRPHE), 2010-2011. Financially supported by Liebherr Aerospace.

PhD students

1. Yu Fang, CFD modeling and experiments of two-phase flows in supersonic ejectors, Universite deSherbrooke / Universite Catholique de Louvain, co-supervisor Y. Bartosiewicz, NSERC funding,2016-19.

2. Ibai Mugica, Experiments and numerical modeling of multiple plate regenerators used in activemagnetic refrigeration, Universite de Sherbrooke, NSERC funding, 2015-18.

3. Maud Foudrinier, Mesures PIV et simulations numeriques de l’ecoulement et des transfertsde chaleur dans un alternateur, Universite de Sherbrooke, co-supervisor S. Moreau, MITACSfunding (IREQ), 2015-18.

4. Sahar Taslimi, Transcritical supersonic ejectors working with CO2: a combined theoretical, nu-merical and experimental approach, Universite de Sherbrooke, co-supervisor M. Sorin, NSERCfunding, 2015-18.

5. Nizar Bouguerra, Characterization of the properties and performances of micro and nanofluids,Universite de Sherbrooke, co-supervisor S. Elkoun, MITACS funding (Sigma Energy Storage),2015-18.

6. Sylvain Chateau, Modelisation et analyse physique du transport de fluides biologiques par bat-tements ciliaires, Universite de Sherbrooke / Aix-Marseille Universite, co-supervisor: J. Favier,NSERC discovery grant, 2015-18.

7. Olivier Lafforgue, Caracterisation rheologique du mucus bronchique et transport par depressionsmecaniques, Aix-Marseille Universite, co-supervisors I. Seyssiecq, J. Favier, CIFRE funding(ANRT, Physio-Assist), 2015-18.

8. Ghofrane Sekrani, Simulations of natural and mixed convection nanofluid flows, visiting PhD,Universite de Tunis El Manar, May 2015 - April 2016.

9. Sergio Croquer, CFD modeling of single-phase ejectors with droplets, Universite de Sherbrooke,NSERC funding, 2014-17.

3

10. Aurelien Bordet, Transport of ice slurry flows in heat exchangers, Universite de Sherbrooke,NSERC funding, 2014-17.

11. Nabila Ait-Moussa, Transition to turbulence in lobed Taylor-Couette flows, PhD, Ecole NationaleSuperieure d’Informatique d’Alger, co-supervisor A. Ghezal, 2014-.

12. Romain Oguic, Simulation des grandes echelles d’un jet impactant un disque tournant, PhDthesis supported by the French Ministry of Research, co-supervisor with S. Viazzo (50%), 2012-2015.

13. Khaoula Hamidi, Modelisation des transferts de chaleur et de masse dans les systemes de Taylor-Couette-Poiseuille. Application aux machines tournantes en regime extreme, co-supervisor withT. Rezoug (Univ. Blida) (30%), 2011-.

14. Guillaume Fontaine, Developpement d’un solveur pseudospectral multidomaine parallele pourla resolution des equations de Navier-Stokes tridimensionnelles en coordonnees cylindriques,PhD thesis supported by DGA (French Ministry of Army), co-supervisor with E. Serre (50%),2008-2012 (defended the 17th of December 2012).

15. Noele Baptista Peres, A 3D pseudospectral method for cylindrical coordinates. Application to thesimulations of rotating cavity flows, PhD thesis supported by the French Ministry of Research,Aix-Marseille Universite, co-supervisor with E. Serre (50%), 2009-2012 (defended the 19th July2012).

Graduate and undergraduate students

1. Senda Trabelsi, Production and storage of ice slurries, Master, Universite de Sherbrooke, NSERCfunding, 2015-17.

2. Steven Roy, Etude d’un systeme de production de froid par regeneration magnetique active atemperature ambiante, Master, Universite de Sherbrooke, May-December 2015.

3. Martial Lavoie, Conception d’un banc d’echangeur thermique finement instrumente utilisant desnanofluides, Bachelor degree, Universite de Sherbrooke, Sept.-dec. 2015.

4. Rafael Vasconselos Moura Araujo, Mise en place d’un protocole experimental pour la car-acterisation des proprietes thermophysiques de nanoparticules a base d’Al2O3, Bachelor degree,Universidade Federal do Ceara, Sept.-dec. 2015.

5. Amemou Hilaire, Numerical simulations of the turbulent flow over a backward-facing step witha free surface: effect of the wall roughness, Master 2, AIMS Cameroon, March-June 2015.

6. Francis Tosolini, Multiobjective optimization of a plate/porous regenerator in magnetic refrig-eration, Master 2, ENSEIRB-Matmeca, February-August 2015.

7. Sachidananda Maharana, Numerical simulation of nanofluid flow and heat transfer in a verticalchannel, Bachelor degree, NIT Rourkela, May-July 2015.

8. Nicolas Paris, Modelisation d’ecoulements turbulents soumis a de la rotation rapide en presencede parois. Application au refroidissement de machines tournantes, Master 2, ESSTIN, supportedby Liebherr Aerospace Toulouse, March-August 2014.

9. Hana Benkoussas, Influence des depressions mecaniques sur le comportement rheologique du mu-cus bronchique, Master 2, Aix-Marseille Universite, February-June 2014. Financially supportedby Physio-Assist.

10. Raıssa Ngwong, Etude sur la caracterisation rheologique du mucus bronchique: simulation numeriquede l’ecoulement air/mucus dans la trachee, Master 1, Aix-Marseille Universite, March-June 2013.Financially supported by Physio-Assist.

11. Valentin Hoarau, Simulation de l’ecoulement du mucus dans les bronchioles respirantes et influ-ence du SIMEOX, Master 1, Ecole de l’Air Salon, April-June 2013.

4

12. Emmanuel Tanti-Hardouin, Simulation numerique directe de la transition vers la turbulence dansun systeme de Taylor-Couette-Poiseuille avec transferts thermiques et entrefer rainure, Master1, June-September 2012. Financially supported by Liebherr Aerospace.

13. Clement Moreau, Bilan carbone du projet Entrefer moteur et etude des conditions d’entree surl’ecoulement de Taylor-Couette-Poiseuille avec gradients thermiques, 2nd year at IUT GTE,April-June 2011. Financially supported by Liebherr Aerospace.

14. Jeff Ngoma, Benchmark numerique sur les ecoulements de type rotor-stator, Master 1, EcolePolytechnique de Marseille, April-June 2009. Financially supported by CNRS.

15. Sofia Haddadi, Modelisation et simulation des ecoulements tournants fortement cisailles, Master2, ENSIAME, February-July 2008. Financially supported by Liebherr Aerospace.

16. Loic Liotard, Stabilite des ecoulements de type Batchelor en cavite rotor-stator fermee: etudeexperimentale et numerique, Master 1, ISITV, April-June 2007. Financially supported by CNRS.

Publications

Peer Reviewed Articles (ACL)

Citation metrics: h = 8 (8 publications cited at least 8 times) and a sum of the times cited equal to174 measured using Web of Knowledge and h = 13, i10 = 17 and a sum of the times cited equal to531 measured using Google Scholar.

1. Oguic R., Viazzo R., Poncet S., Direct numerical simulations of a turbulent round impingingjet onto a rotating heated disk in a highly confined cavity, Int. J. Heat Fluid Flow, submitted,2016

2. Croquer S., Poncet S., Galanis N., Comparison of ejector predicted performance by thermody-namic and CFD models, Applied Thermal Engineering, submitted, 2016

3. Croquer S., Poncet S., Aidoun Z., Turbulence modeling of a single-phase R134a supersonicejector. Part 2: Local flow structure and exergy analysis, Int. J. Refrigeration, 61, p.153-165,2016

4. Croquer S., Poncet S., Aidoun Z., Turbulence modeling of a single-phase R134a supersonicejector. Part 1: Numerical benchmark, Int. J. Refrigeration, 61, p.140-152, 2016

5. Li Z., Favier J., D’Ortona U., Poncet S., An immersed boundary-lattice Boltzmann methodfor single- and multi-component fluid flows, J. Comp. Phys., 304, p.424-440, 2016

6. Oguic R., Viazzo R., Poncet S., A parallelized multidomain compact solver for incompressibleturbulent flows in cylindrical geometries, J. Comp. Phys., 300, p.710-731, 2015

7. Sahoo B., Poncet S., Labropulu F., Effects of slip on the von Karman swirling flow and heattransfer in a porous medium, Trans. Can. Soc. Mech. Eng., 39 (2), p.357-366, 2015

8. Ait-Moussa N., Poncet S., Ghezal A., Numerical Simulations of Co- and Counter-Taylor-Couette Flows: Influence of the Cavity Radius Ratio on the Appearance of Taylor Vortices,Am. J. Fluid Dynamics, 5 (1), p.17-22, 2015

9. Aubert A.,Poncet S., Le Gal P., Viazzo S., Le Bars M., Velocity and temperature measurementsin a turbulent water-filled Taylor-Couette-Poiseuille system, Int. J. Thermal Sci., 90, p.238-247,2015

10. Sahoo B., Poncet S., Labropulu F., Suction/injection effects on the swirling flow of a Reiner-Rivlin fluid near a rough surface, J. Fluids, Article ID 253504, 2015

11. Poncet S., Viazzo S., Oguic R., Large Eddy Simulations of Taylor-Couette-Poiseuille flows ina narrow-gap system, Phys. Fluids, 26 (10), 105108, 2014

5

12. Poncet S., The stability of a thin water layer over a rotating disk revisited, Eur. Phys. J. Plus,129 (8), Article 167, 2014

13. Viazzo S., Poncet S., Stability of a high aspect ratio Taylor-Couette flow submitted to a radialtemperature gradient, Computers & Fluids, 101, p.15-26, 2014

14. Sahoo B., Abbasbandy S., Poncet S., A brief note on the computation of the Bodewadt flowwith Navier slip boundary conditions, Computers & Fluids, 90, p.133-137, 2014

15. Poncet S., Pelle J., Nguyen T., Harmand S., Da Soghe R., Bianchini C., Viazzo S., Turbulentimpinging jet flow into an unshrouded rotor-stator system: hydrodynamics and heat transfer,Int. J. Heat Fluid Flow, 44, p.719-734, 2013

16. Poncet S., Da Soghe R., Bianchini C., Viazzo S., Aubert A., Turbulent Couette-Taylor flowswith endwall effects: a numerical benchmark, Int. J. Heat Fluid Flow, 44, p.229-238, 2013

17. Sahoo B., Poncet S., Blasius flow and heat transfer of a fourth grade fluid with slip, to appearin Appl. Math. Mech., 34 (12), p.1465-1480, 2013

18. Harmand S., Pelle J., Poncet S., Shevchuk I., Review of fluid flow and convective heat transferwithin rotating disk cavities with impinging jet, Int. J. Therm. Sci., 67, p.1-30, 2013

19. Peres N., Poncet S., Serre E., A 3D pseudo-spectral method for cylindrical coordinates. Appli-cation to the simulations of rotating cavity flows, J. Comp. Phys., 231, p.6290-6305, 2012

20. Nguyen T.D., Pelle J., Harmand S., Poncet S., PIV measurements of a jet impinging to anopened rotor-stator system, sous presse, Exp. in Fluids, 53, p.401-412, 2012

21. Sahoo B., Poncet S., Effects of slip on steady Bodewadt flow of a Reiner-Rivlin fluid, Commu-nications in Nonlinear Science and Numerical Simulations, 17, p.4181-4191, 2012

22. Viazzo S., Poncet S., Serre E., Randriamampianina A., Bontoux P., High-order LES bench-marking of confined rotor-stator flows, Flow, Turbulence & Combustion, 88 (1-2), p.63-75, 2012

23. Poncet S., Dahlberg L., The legacy of Henri Victor Regnault in arts and sciences, Int. J. Arts& Science, 4 (13), p.377-400, 2011

24. Sahoo B., Poncet S., Flow and heat transfer of a third grade fluid past an exponentiallystretching sheet with partial slip boundary condition, Int. J. Heat Mass Transfer, 54 (23-24),p.5010-5019, 2011

25. Poncet S., Haddadi S., Viazzo S., Numerical modeling of fluid flow and heat transfer in anarrow Taylor-Couette-Poiseuille system, Int. J. Heat Fluid Flow, 32, p.128-144, 2011

26. Poncet S., Chauve M.P., Curvature effects on the instabilities of Batchelor rotating disk flows,Int. J. Fluid Mech. Research, 37 (4), p.343-358, 2010

27. Launder B.E., Poncet S., Serre E., Laminar, Transitional and Turbulent Rotating Disk Flows,Ann. Rev. Fluid Mech., Vol.42, p.229-248, 2010

28. Abdel Nour F., Poncet S., Debuchy R., Bois G., A Combined Analytical, Experimental andNumerical Investigation of Turbulent Air Flow Behaviour in a Rotor-Stator Cavity, Mecanique& Industries, 10 (3-4), p.195-202, 2009

29. Poncet S., Serre E., High-order LES of turbulent heat transfer in a rotor-stator cavity, Int. J.Heat Fluid Flow, 30 (4), p.590-601, 2009

30. Poncet S., Serre E., Le Gal P., Revisiting the two first instabilities of the flow in an annularrotor-stator cavity, Phys. Fluids, 21 (6), 064106, 2009

31. Haddadi S., Poncet S., Turbulence modeling of torsional Couette flows, Int. J. Rotating Ma-chinery, Article ID 635138, 27 pages, 2008

6

32. Poncet S., Chauve M.-P., Le Gal P., Lois analytiques pour les ecoulements en cavite rotor-stator, Mecanique & Industries, 9 (3), p.227-236, 2008

33. Poncet S., Schiestel R., Monchaux R., Turbulence modeling of the Von Karman flow: viscousand inertial stirrings, Int. J. Heat Fluid Flow, 29 (1), p.62-74, 2008

34. Poncet S., Randriamampianina A., Three-dimensional turbulent boundary layer in a shroudedrotating system, Flow, Turbulence and Combustion, 80 (1), p.107-117, 2008

35. Severac E., Poncet S., Serre E., Chauve M.-P., Large eddy simulation and measurements ofturbulent enclosed rotor-stator flows, Phys. Fluids, 19 (8), 085113 (17 pages), 2007

36. Poncet S., Chauve M.-P., Shear-layer instability in a rotating system, J. Flow Visualizationand Image Processing, 14 (1), p.85-105, 2007

37. Poncet S., Schiestel R., Numerical modeling of heat transfer and fluid flow in rotor-statorcavities with throughflow, Int. J. Heat Mass Transfer, 50 (7-8), p.1528-1544, 2007

38. Shew W.L., Poncet S., Pinton J.F., Force measurements on rising bubbles, J. Fluid Mech.,569, p.51-60, 2006.

39. Randriamampianina A., Poncet S., Turbulence characteristics of the Bodewadt layer in a largeenclosed rotor-stator system, Phys. Fluids, 18 (5), 055104 (16 pages), 2006

40. Poncet S., Chauve M.-P., Seuils d’instabilites des ecoulements de type rotor-stator avec fluxaxial, C.R. Mecanique, 334 (2), p.123-128, 2006

41. Poncet S., Chauve M.-P., Crossflow instability in a rotor-stator cavity with an axial inwardthroughflow, J. Fluid Mech., 545, p.281-289, 2005

42. Poncet S., Randriamampianina A., Ecoulement turbulent dans une cavite rotor-stator fermeede grand rapport d’aspect, C.R. Mecanique, 333 (10), p.783-788, 2005

43. Poncet S., Schiestel R., Chauve M.-P., Centrifugal flow in a rotor-stator cavity, J. Fluid Eng.,127 (4), p.687-694, 2005

44. Poncet S., Chauve M.-P., Schiestel R., Batchelor versus Stewartson flow structures in a rotor-stator cavity with throughflow, Phys. Fluids, 17 (7), 075110 (15 pages), 2005

45. Poncet S., Chauve M.P., Le Gal P., Turbulent Rotating Disk with Inward Throughflow, J.Fluid Mech., 522, p.253-262, 2005

Peer Reviewed Papers in International Conferences (ACTI)

1. Lafforgue O., Seyssiecq-Guarente I., Favier J., Poncet S., Rheological characterization of macro-molecular colloidal gels as simulant of bronchial mucus, 32nd Int. Conf. Polymer ProcessingSociety, Lyon, July 25-29, 2016

2. Chateau S., Mercat J., Li Z., Poncet S., Favier J., D’Ortona U., Emergence of metachronalwaves in cilia arrays: a hydrodynamic mechanism, 24th International Congress of Theoreticaland Applied Mechanics, Montreal, August 21-26, 2016

3. Oguic R., Viazzo S., Poncet S., Direct Numerical Simulation of the Turbulent Flow Inside aSimplified Stage of High-Pressure Compressor, 24th International Congress of Theoretical andApplied Mechanics, Montreal, August 21-26, 2016

4. Bordet A., Poncet S., Poirier M., Galanis N., Numerical simulations of solid suspension flows ina horizontal pipe, 24th International Congress of Theoretical and Applied Mechanics, Montreal,August 21-26, 2016

5. Croquer S., Poncet S., Galanis N., Coupled thermodynamic and CFD approaches applied to asupersonic air ejector, 2016 Purdue Conferences: compressor engineering, refrigeration and airconditioning, high performance buildings, Purdue, July 11-14, 2016

7

6. Tosolini F., Roy S., Poncet S., Multiobjective optimization of plate/porous regenerator usinga 1.5D numerical model for magnetic refrigeration, 2016 Purdue Conferences: compressor en-gineering, refrigeration and air conditioning, high performance buildings, Purdue, July 11-14,2016

7. Benkoussas H., Seyssiecq-Guarente I.,Poncet S., Etude experimentale de l’influence de depressionmecanique sur le transport et le comportement rheologique du mucus bronchique synthetiquedans une trachee artificielle, 2e Conference Internationale de Mecanique (ICM’15), Constantine,November 25-26, 2015

8. Croquer S., Poncet S., Aidoun Z., Energetic and exergetic analyses of a R134a ejector by aCFD approach, 24th IIR Int. Congress Refrigeration, Yokohama, August 16-22, 2015

9. Ait-Moussa N., Poncet S., Ghezal A., Numerical investigation of the stability in triangularlobed Taylor-Couette flow, 6th Int. Symp. Bifurcations and Instabilities in Fluid Dynamics,Paris, July 15-17, 2015

10. Oguic R., Viazzo S., Poncet S., Simulations numeriques d’un jet turbulent en impact et destransferts thermiques dans une machine discoide, XII Colloque Franco-Quebecois sur la Ther-mique des Systemes, Sherbrooke, June 8-10, 2015

11. Croquer S., Poncet S., Aidoun Z., Etude numerique d’un ejecteur monophasique fonctionnantau R-134a, XII Colloque Franco-Quebecois sur la Thermique des Systemes, Sherbrooke, June8-10, 2015

12. Hamidi K., Rezoug T., Poncet S., Modelisation des transferts thermiques dans l’entrefer mo-teur d’une machine electrique, XII Colloque Franco-Quebecois sur la Thermique des Systemes,Sherbrooke, June 8-10, 2015

13. Poncet S., Viazzo S., Instabilites thermo-convectives dans un systeme de Taylor-Couette degrand allongement par simulations numeriques directes, XII Colloque Franco-Quebecois sur laThermique des Systemes, Sherbrooke, June 8-10, 2015

14. Friess C., Poncet S., Viazzo S., Benchmark of turbulence modelings in a Taylor-Couette-Poiseuille system, 10th International ERCOFTAC Symposium on Engineering Turbulence Mod-elling and Measurements (ETMM10), Marbella, September 17-19, 2014

15. Ait Moussa N., Poncet S., Ghezal A., Lounis M., Effect of radius ratio on the stability ofco- and counter-Taylor-Couette flow, Int. Conf. Heat Transfer Fluid Flow (HTFF’14), Prague,August 11-12, 2014

16. Friess C., Poncet S., Viazzo S., An extensive study on LES, RANS and hybrid RANS/LESsimulation of a narrow-gap open Taylor-Couette flow, ASME 4th Joint US-European FluidsEngineering Summer Meeting, Chicago, August 3-7, 2014

17. Poncet S., Polygons on a rotating thin-water layer: a combined experimental and numericalapproach, Topical Problems of Fluid Mechanics, Prague, February 19-21, 2014

18. Friess C., Poncet S., Viazzo S., Taylor-Couette-Poiseuille flows: from RANS to LES, Int. Symp.on Turbulence & Shear Flow Phenomena TSFP 8, Poitiers, 28-30 August 2013

19. Poncet S., Nguyen T.D., Harmand S., Pelle J., Viazzo S., Transferts de chaleur et de masse dansun systeme discoide de type rotor-stator, XIeme Colloque Interuniversitaire Franco-Quebcois surla Thermique des Systemes, Reims, 3-5 June 2013

20. Oguic R., Viazzo S., Poncet S., Numerical simulations of a middle gap turbulent Taylor-Couette-Poiseuille flow, Direct and Large-Eddy Simulation 9, Dresden, 3-5 April 2013

21. Peres N., Poncet S., Serre E., A 3D pseudo-spectral algorithm to simulate turbulent flowsin cylindrical rotating cavities, International Conference on Spectral and High Order MethodsICOSAHOM 2012, Gammarth (Tunisia), 25-29 June 2012

8

22. Guillerm R., Da Soghe R., Bianchini C., Poncet S., Viazzo S., Numerical predictions of flowfield in closed and opened Taylor-Couette cavities, European Conference for Aerospace Sciences(EUCASS 4), Saint-Petersburg, 4-8 July 2011

23. Da Soghe R., Innocenti L., Andreini A., Poncet S., Numerical Benchmark of Turbulence mod-elling in Gas Turbine Rotor-Stator System, Proceedings of ASME TURBO EXPO 2010: Powerfor Land, Sea & Air, papier GT2010-22627, Glasgow, 14-18 June 2010

24. Viazzo S., Randriamampianina A., Poncet S., Bontoux P., Serre E., High-order LES bench-marking of confined rotor-stator flows, Proc. of the 8th Int. ERCOFTAC symposium on Engi-neering Turbulence Modelling and Measurements (ETMM8), Marseilles, 9-11 June 2010

25. Viazzo S., Poncet S., Serre E., Randriamampianina A., Bontoux P., High-order LES bench-marking in confined rotating disk flows, 3rd European Conference for Aerospace Sciences (EU-CASS), Versailles, 6-9 July 2009

26. Barrios H., Viazzo S., Rey C., Poncet S., Simulation numerique d’un ecoulement de convec-tion mixte en aval d’une marche, 14emes Journees Internationales de Thermiques (JITH2009),Djerba (Tunisia), 27-29 March 2009

27. Haddadi S., Poncet S., Viazzo S., Modelisation de la turbulence dans un systeme de Taylor-Couette differentiellement chauffe avec flux axial, 14emes Journees Internationales de Ther-miques (JITH2009), Djerba (Tunisia), 27-29 March 2009

28. Debuchy R., Poncet S., Abdel Nour F., Bois G., Experimental and numerical investigationof turbulent air flow behaviour in a rotor-stator cavity, Proc. of the European TurbomachineryConference 8 (ETC8), Graz (Austria), 23-27 March 2009

29. Poncet S., Serre E., Large Eddy Simulation of Non-Isothermal Turbulent Rotor-Stator Flows,The Twelfth International Symposium on Transport Phenomena and Dynamics of Rotating Ma-chinery (ISROMAC-12), ISROMAC12-2008-20009, Honolulu (USA), 17-22 February 2008

30. Severac E., Poncet S., Serre E., Chauve M.-P., Large Eddy Simulation and Measurements ina Turbulent Rotor-stator Flow, Proceedings of the 5th International Symposium on Turbulenceand Shear Flow Phenomena (TSFP5), Edited by J.A.C. Humphrey , J.K. Eaton, R. Friedrich,N. Kasagi, M.A. Leschziner & T. B. Gatski, Munich, 27-29 August 2007

31. Poncet S., Randriamampianina A., Turbulence characteristics of the Bodewadt layer in a largeshrouded rotor-stator system, Conference on Turbulence and Interactions TI2006, Porquerolles(France), 29 May - 2 June 2006

Peer Reviewed Papers in National Conferences (ACTN)

1. Oguic R., Viazzo S., Poncet S., Simulations numeriques directes d’ecoulements turbulentsisothermes dans un compresseur haute-pression simplifie, 22e Congres Francais de Mecanique,Lyon, August 24-28, 2015

2. Poncet S., Viazzo S., Boundary layer properties for turbulent Taylor-Couette-Poiseuille flowsin a narrow-gap cavity, 25th CANCAM, London (Canada), May 31 - June 4, 2015

3. Aubert A., Poncet S., Le Gal P., Viazzo S., Le Bars M., Thouveny T., Transferts de chaleur etde masse dans des ecoulements turbulents de Taylor-Couette avec flux axial, Congres Francaisde Mecanique, Bordeaux, 24-28 August 2013

4. Aubert A., Thouveny T., Le Bars M., Le Gal P., Poncet S., Viazzo S., Transferts de chaleur etde masse dans des ecoulements turbulents de Taylor-Couette avec flux axial, Congres Francaisde Thermique - SFT 2013 Thermique & Contexte incertain, Gerardmer, 28-31 May 2013

5. Peres N.,Poncet S., Serre E., Traitement numerique de la singularite a l’axe pour les ecoulements3D en cavites tournantes, Actes du XXeme Congres Francais de Mecanique, Ed. D. Chapelle, M.Dahan, P. Picart, Presses universitaires de Franche-Comte, ISBN 978-2-84867-416-2, Besancon,28 August - 2 September 2011

9

6. Fontaine G., Poncet S., Serre E., Approche multidomaine pseudospectrale pour la resolutiondes eequations de Navier-Stokes en geometrie cylindrique, Actes du XXeme Congres Francaisde Mecanique, Ed. D. Chapelle, M. Dahan, P. Picart, Presses universitaires de Franche-Comte,ISBN 978-2-84867-416-2, Besancon, 28 August - 2 September 2011

7. Guillerm R., Da Soghe R., Poncet S., Viazzo S., Benchmark numerique des ecoulements deCouette-Taylor turbulents, Actes du XXeme Congres Francais de Mecanique, Ed. D. Chapelle,M. Dahan, P. Picart, Presses universitaires de Franche-Comte, ISBN 978-2-84867-416-2, Be-sancon, 28 August - 2 September 2011

8. Sahoo B., Poncet S., Effets des conditions de glissement sur l’ecoulement de Bodewadt d’un flu-ide de type Reiner-Rivlin, Actes du XXeme Congres Francais de Mecanique, Ed. D. Chapelle, M.Dahan, P. Picart, Presses universitaires de Franche-Comte, ISBN 978-2-84867-416-2, Besancon,28 August - 2 September 2011

9. Poncet S., Chauve M.P., Instabilite d’une couche de cisaillement au-dessus d’un disque enrotation, Actes du 18eme Congres Francais de Mecanique, Grenoble, 27-31 August 2007

10. Severac E., Poncet S., Serre E., Chauve M.-P., Large Eddy Simulation and experimentation inan enclosed rotor-stator flow, Actes du 18eme Congres Francais de Mecanique, Grenoble, 27-31August 2007

11. Serre E., Poncet S., Schiestel R. Launder B., Simulation d’ecoulements transitionnels et turbu-lents en cavites rotor-stator avec transferts de chaleur, Congres Francais de Thermique SFT07:Thermique et Societe, Ile des Embiez (France), 29 May - 1 June 2007

12. Poncet S., Chauve M.-P., Schiestel R., Ecoulements tournants: de Stewartson a Batchelor,Actes du 17eme Congres Francais de Mecanique, Troyes, 29 August - 2 September 2005

Oral communications without proceedings in international or national con-ferences (COM)

1. Mercat J., Li Z., Favier J., D’Ortona U., Poncet S., Numerical study of the generation ofmetachronal waves in layers of beating cilia using a Lattice Boltzmann method. Application tothe generation of fluid motion at the cell scale, American Physical Society 68th Annual DFDMeeting, Boston, November 22-24, 2015

2. Li Z., Favier J., D’Ortona U., Poncet S., An immersed boundary method for imposing solidwall conditions in lattice Boltzmann solvers for single- and multi-component fluid flows, The67th Annual Meeting of American Physical Society’s Division of Fluid Dynamics, San Francisco,November 23-25, 2014

3. Sahoo B., Poncet S., Abbasbandy S., Labropulu F., Effects of suction and injection on swirlingflow near a rough disk, ICMMCS, Madras (India), 8-10 December 2014

4. Sahoo B., Abbasbandy S., Poncet S., Pop I., Labropulu F., Modeling and computation ofBodewadt flow and heat transfer of a viscous fluid near a rough disk, ISMMACS, Kanpur(India), 31 December 2013 - 2 January 2014

5. Ait-Moussa N., Poncet S., Ghezal A., Lounis M., Numerical study of the transition in counter-rotating Taylor-Couette flow for a wide gap, 18th International Couette-Taylor Workshop ICTW18,Twente, 24-26 June 2013

6. Poncet S., Viazzo S., Thermo-hydrodynamic instabilities in a high aspect ratio Couette-Taylorsystem using Direct Numerical Simulation, European Fluid Mechanics Conference 9, Roma, 9-13September 2012

7. Kahouadji L., Martin-Witkowski L., Peres N., Poncet S., Le Quere P., Serre E., Primarybifurcation of a thin-layer flow driven by a rotating disk in a fixed open cylindrical cavity:flat free surface, 4th International Symposium Bifurcations and instabilities in fluid dynamics,Barcelona, 18-21 July 2011

10

8. Peres N., Poncet S., Serre E., Transition mechanisms to turbulence in a cylindrical rotor-stator cavity by pseudo-spectral simulations of Navier-Stokes equations, Chaos, Complexity andTransport, Marseilles, 23-27 May 2011

9. Viazzo S., Randriamampianina A., Poncet S., Serre E., High-order LES benchmarking in con-fined rotor-stator flows, Large Eddy Simulation in Turbulence, Aeroacoustic and Combustion(LESTAC 09), Marseilles, 24-28 August 2009

10. Poncet S., Serre E., Chauve M.P., Le Gal P., Circular and spiral waves in a Batchelor flowbetween a rotating and a stationary disk, EUROMECH Fluid Mechanics Conference 7 (EFMC7),Manchester, 14-18 September 2008. Marie Curie funding

11. Serre E., Severac E., Poncet S., Chauve M.-P., Large Eddy Simulation and Measurements ofTurbulent Rotor-Stator Flows, 60th Annual Meeting of the Divison of Fluid Dynamics, APS,Salt Lake City, 18-20 November 2007

12. Poncet S. et al., Sur les Ecoulements de Disque Tournant, Colloque Interdisciplinaire des EcolesCentrale, Marseilles, 31 Mai - 1 June 2007

13. Poncet S., Chauve M.-P., Crossflow instability in rotor-stator flows with throughflow, EuromechFluid Mechanics Conference 6, Stockholm, 26-30 June 2006

14. Poncet S., Schiestel R., Numerical modeling of heat transfer and fluid flow in rotor-statorcavities with throughflow, Euromech Fluid Mechanics Conference 6, Stockholm, 26-30 June2006

15. Poncet S., Chauve M.-P., Schiestel R., Ecoulements tournants: de Batchelor a Stewartson,Observer, Analyser, Modeliser, dans les milieux fluides complexes, EGIM (Marseilles), 2005

Book chapters (OS)

1. Oguic R., Viazzo S., Poncet S., Numerical simulations of a middle gap turbulent Taylor-Couette-Poiseuille flow, Direct and Large-Eddy Simulation IX, J. Frohlich, H. Kuerten, B.J.Geurts, V. Armenio (Eds), ERCOFTAC Series, Springer, p.473-478, 2015

2. Fontaine G., Poncet S., Serre E., Multidomain extension of a divergence-free pseudo-spectralalgorithm for the direct numerical simulation of wall-confined rotating flows, Lecture Notes incomputational Science and Engineering, M. Azaiez, H. El Fekih, J.S. Hesthaven (Eds), Springer,95, p.261-271, 2014

3. Poncet S., Da Soghe R., Facchini B., RANS modeling of flows in rotating cavity systems,Proceedings of the V European Conference on Computational Fluid Dynamics ECCOMAS CFD2010, J.C.F. Pereira, A. Sequeira & J.M.C. Pereira (Eds), ISBN: 978-989-96778-1-4, Lisbon,Portugal, June 14-17, 2010

4. Peres N., Poncet S., Serre E., Numerical treatment of cylindrical coordinate singularity, Pro-ceedings of the V European Conference on Computational Fluid Dynamics ECCOMAS CFD2010, J.C.F. Pereira, A. Sequeira & J.M.C. Pereira (Eds), ISBN: 978-989-96778-1-4, Lisbon,Portugal, June 14-17, 2010

5. Poncet S., Le Gal, P., Serre E., Simulation numerique directe des ecoulements rotor-statoren cavite annulaire, Actes du XIXe Congres Francais de Mecanique, Marseilles, Ed. C. Rey, P.Bontoux, A. Chrysochoos, ISSN 2103− 6225 paper 594 - S9, 24-28 August 2009

6. Abdel Nour F., Debuchy R., Bois G., Poncet S., A combined Analytical Experimental andNumerical Investigation of Turbulent Air Flow Behaviour in a Rotor-Stator Cavity, Actes duXIXe Congres Francais de Mecanique, Marseilles, Ed. C. Rey, P. Bontoux, A. Chrysochoos,ISSN 2103− 6225 paper 222 - S11, 24-28 August 2009

7. Severac E.,Poncet S., Serre E., Chauve M.-P., A coupled numerical / experimental investigationof a turbulent rotor-stator flow, Conference Proceedings of the 8th International Symposium onExperimental and Computational Aerothermodynamics of Internal Flows, Ed. X.Ottavy & I.Trebinjac, Volume 2, p.703-712, paper ISAIF8-006, Lyon, 2-5 July 2007

11

8. Poncet S., Schiestel R., Monchaux R., Turbulent Von Karman flow between two counter-rotating disks, Conference Proceedings of the 8th International Symposium on Experimental andComputational Aerothermodynamics of Internal Flows, Ed. X.Ottavy & I. Trebinjac, Volume 1,p.141-150, paper ISAIF8-0013, Lyon, 2-5 July 2007

9. Poncet S., Schiestel R., Monchaux R., Turbulent Von Karman Swirling flows, Advances inTurbulence XI, Proceedings of the 11th EUROMECH European Turbulence Conference, Editors:J.M.L.M. Palma and A.Silva Lopes, Springer Proceedings in Physics 117, Springer, Heidelberg,ISBN 978-3-540-72603-6, Porto, Portugal, June 25-28, 2007

10. Poncet S., Chauve M.-P., Le Gal P., Study of the entrainment coefficient of the fluid in arotor-stator cavity, Proc. of the 6th European Conference on Turbomachinery - Fluid Dynamicsand Thermodynamics Vol.1, Ed. G. Bois, C. Sierverding, M. Manna, T. Arts, ENSAM (Lille),p.246-256, 2005

11. Poncet S., Schiestel R., Chauve M.-P., Turbulence modelling and measurements in a rotor-stator system with throughflow, Engineering Turbulence Modelling and Experiments 6, Ed. W.Rodi & M. Mulas, Elsevier (New-York), p.761-770, 2005

12. Poncet S., Chauve M.-P., Le Gal P., Experimental study of rotor-stator flows with centripetalfluxes, Mechanics of the 21st Century, Proceedings of the 21st International Congress of The-oretical and Applied Mechanics, ISBN 1-4020-3559-4, Eds. W. Gutkowski, T.A. Kowalewski,Springer Verlag, 2005 (ICTAM 2004, Warsaw)

Reports of industrial contracts

1. Aubert A., Poncet S., Le Gal P., Viazzo S., Le Bars M., Projet entrefer moteur: Caracterisationdes ecoulements et des transferts thermiques dans l’entrefer entre un cylindre fixe et un cylindretournant soumis ou non a un flux axial, Liebherr Aerospace Toulouse, Contract 30017596,Final report, 2013

2. Seyssiecq-Guarente I.,Poncet S., Etude sur la caracterisation rheologique du mucus bronchique.Premiers resultats sur fluides modeles, Physio-Assist, Contract 080931, Report 2, 2012

3. Poncet S., Seyssiecq-Guarente I., Etude sur la caracterisation rheologique du mucus bronchique.Etude bibliographique, Physio-Assist, Contract 080931, Report 1, 2012

4. Aubert A., Poncet S., Le Gal P., Le Bars M., Viazzo S., Projet entrefer moteur: Caracterisationdes ecoulements et des transferts thermiques dans l’entrefer entre un cylindre fixe et un cylindretournant soumis ou non a un flux axial, Liebherr Aerospace Toulouse, Contract 30017596,Report 2, 2012

5. Poncet S., Le Gal P., Viazzo S., Le Bars M., Guillerm R., Moreau C., Projet entrefer moteur:Caracterisation des ecoulements dans l’entrefer entre un cylindre fixe et un cylindre tournantsoumis ou non a un flux axial, Liebherr Aerospace Toulouse, Contract 30017596, Report 1,2011

6. Chauve M.-P., Poncet S., Le Gal, P., Campagne de caracterisation des ecoulements cen-trifuges et centripetes entre un disque fixe lisse et un disque tournant ailete, SNECMA Moteurs,2005.060.I, 2005

7. Poncet S., Chauve M.-P., Le Gal, P., Campagne de caracterisation des ecoulements centrifugesentre un disque lisse fixe et un disque lisse tournant, SNECMA Moteurs, 2004.093.G, 2005

8. Chauve M.-P., Poncet S., Le Gal, P., Campagne de caracterisation des ecoulements centripetesaux travers d’ajutages superieurs, SNECMA Moteurs, 2003.021.G, 2004

12

Articles of popular science (OV)

1. Viazzo S., Poncet S., Stability of Taylor-Couette Flows With a Radial Temperature Gradient,ERCOFTAC Bulletin 98, Ed. M. Marek, p.16-17, 2014.

2. Collegiate writing, Activities of the M2P2 laboratory, Report of the South-France Pilot Centerby M. Braza, ERCOFTAC Bulletin 97, Ed. M. Marek, p.20-24, 2013

3. Poncet S., Bontoux P., Ciraolo G., Morvan D., Serre E., Main activities of the MSNM-GPlaboratory, in France South Pilot Center by M. Braza, ERCOFTAC Bulletin 77, Ed. N. Borhani,p.42-46, 2008

Editorial activities (DO)

� Member of the Editorial Board of the Mechanical Engineering Research (Canadian Center ofScience and Education), 2014-

� Member of the Editorial Board of the International Journal of Energy and Power Engineering(Science Publishing Group), 2014-

� Member of the Editorial Board of the Journal of Energy and Natural Resources (Science Pub-lishing Group), 2014-

� Member of the Editorial Board of the Advances in Chemical Engineering (Edinwilsen, journalfunded in 2013), 2013-14

� Member of the Editorial Board of the Progress in Computational Fluid Dynamics (Inderscience,Impact factor: 0.48) since 2013

� Member of the Editorial Board of the The Scientific World Journal, Mechanical Engineering(Hindawi, Impact factor: 1.73) since 2013

� Member of the Editorial Board of the Journal of Nonlinear Dynamics (Hindawi, journal fundedin 2013) since 2013

� Member of the Editorial Board of the American Journal of Fluid Mechanics (SAPUB) since2011 and then Editor-in-chief since 2012

Dissertations

� Habilitation thesis (HDR), Instabilities, turbulence and heat transfer in confined rotating flows,Aix-Marseille University, 5th of February 2014

� PhD thesis, Ecoulements de type rotor-stator soumis a un flux axial: de Batchelor a Stewartson,under the supervisions of Marie-Pierre Chauve & Roland Schiestel, IRPHE / University of Aix-Marseille I, 3rd of October 2005Book format published by the “Editions Universitaires Europeennes”: Ecoulements de type rotor-stator soumis a un flux axial, ISBN 978-613-1-51686-3, 18 June 2010

� Master’s dissertation, Detection et suivi de cibles: etude du mouvement d’une bulle par l’effetDoppler ultrasonore, under the supervision of Jean-Francois Pinton, Laboratoire de physique -ENS Lyon, 2002

Seminars & Presentations

Invited Seminars

1. CFD Modeling of a single phase supersonic ejector with R134a using a Low Reynolds numbermodeling approach, Mechanical Engineering Department, Universite de Laval, Quebec, May 12,2015.

13

2. Deux exemples de simulation d’ecoulements turbulents dans le domaine des turbomachines,Faculte de Genie, Sherbrooke, 15 March 2011

3. Simulation et modelisation d’ecoulements turbulents dans les turbomachines, Universite desSciences et de la Technologie (USTO), Mohamed Boudiaf, Oran, 11 November 2010

4. High-order LES of confined rotor-stator flows, Institute of Thermomechanics, Academy of Sci-ences of Czech Republic, Prague, 25 May 2010

5. High-order LES of confined rotor-stator flows, Energy Engineering Department S. Stecco, Uni-versity of Florence, Florence, 16 April 2010

6. Approches experimentale et numerique des ecoulements de disque tournant, ENSAM-LML, Lille,27 March 2008

7. “Cafe” seminar - Revue sur les ecoulements de disque(s) tournant(s), Laboratoire PMMH, Paris,4 May 2006

8. “Cafe” seminar - Revue sur les ecoulements de disque(s) tournant(s), LMFA, Lyon, 2 May 2006

9. “Cafe” seminar - Revue sur les ecoulements de disque(s) tournant(s), CEA/SPEC/GIT, Saclay,4 January 2006

Presentations in International Conferences

1. Boundary layer properties for turbulent Taylor-Couette-Poiseuille flows in a narrow-gap cavity,25th CANCAM, London (Canada), 1 June 2015

2. Transport du mucus bronchique par depressions mecaniques: le SIMEOX, 5e rencontres Sherbrooke-Montpellier, Sherbrooke, 10 June 2015

3. Polygons on a rotating thin-water layer: a combined experimental and numerical approach,Topical Problems of Fluid Mechanics, Prague, 19 February 2014

4. Transferts de chaleur et de masse par jet impactant dans un systeme discoide rotor-stator, XIColloque Interuniversitaire Franco-Quebecois sur la Thermique des Systemes, Reims, 4 June2013

5. Thermo-hydrodynamic instabilities in a high aspect ratio Couette-Taylor system using DirectNumerical Simulation, European Fluid Mechanics Conference 9, Roma, 13 September 2012

6. Numerical predictions of flow field in closed and opened Taylor-Couette cavities, European Con-ference for Aerospace Sciences (EUCASS 4), Saint-Petersburg, 7 July 2011

7. The legacy of Henri Victor Regnault in arts and sciences, IJAS Conference Series, Aix enProvence, 7 June 2011

8. RANS modeling of flows in rotating cavity systems, ECCOMAS CFD 2010, Lisbon, 15 June2010

9. High-order LES benchmarking in confined rotating disk flows, 3rd European Conference forAerospace Sciences (EUCASS), Versailles, 9 July 2009

10. Circular and spiral waves in a Batchelor flow between a rotating and a stationary disk, SeventhEuromech Fluid Mechanics Conference, Manchester, 16 September 2008

11. Large Eddy Simulation of Non-Isothermal Turbulent Rotor-Stator Flows, ISROMAC12, Hon-olulu, 20 February 2008

12. Turbulent Von Karman flow between two counter-rotating disks, 8th International Symposiumon Experimental and Computational Aerothermodynamics of Internal Flows, Lyon, 2 July 2007

13. Turbulent Von Karman swirling flows, 11th European Turbulence Conference, Porto, 27 June2007

14

14. Numerical modeling of heat transfer and fluid flow in rotor-stator cavities with throughflow,Euromech Fluid Mechanics Conference 6, Stockholm, 27 June 2006

15. Crossflow instability in rotor-stator flows with throughflow, Euromech Fluid Mechanics Confer-ence 6, Stockholm, 27 June 2006

16. Turbulence characteristics of the Bodewadt layer in a large shrouded rotor-stator system, Con-ference on Turbulence and Interactions TI2006, Porquerolles, 29 May 2006

17. Turbulence modelling and measurements in a rotor-stator system with throughflow, 6th Int.Symp. on Engng Turbulence Modelling and Measurements, Villasimius (Italy), 25 May 2005

18. Study of the entrainment coefficient of the fluid in a rotor-stator cavity, 6th European Turboma-chinery Conference - Fluid Dynamics and Thermodynamics, Lille, 8 March 2005

Presentations in National Conferences

1. Effets des conditions de glissement sur l’ecoulement de Bodewadt d’un fluide de type Reiner-Rivlin, 20e Congres Francais de Mecanique, Besancon, 2 September 2011

2. Benchmark numerique des ecoulements de Couette-Taylor turbulents, 20e Congres Francais deMecanique, Besancon, 30 August 2011

3. Etudes numeriques d’ecoulements confines en rotation, Journee de la SFT - Groupe “Modes detransfert - Convection”, Paris, 21 June 2011

4. Simulation numerique directe des ecoulements rotor-stator en cavite annulaire, XIXe CongresFrancais de Mecanique, Marseilles, 26 August 2009

5. Instabilities and turbulence in rotating disk flows, Journee ERCOFTAC SIG 36 “Swirling flows”,ENSEEIHT, Toulouse, 23 October 2007

6. Instabilite d’une couche de cisaillement au-dessus d’un disque en rotation, 18eme Congres Francaisde Mecanique, Grenoble, 29 August 2007

7. Sur les ecoulements de disque tournant, Colloque Interdisciplinaire des Ecoles Centrale, Mar-seilles, 1 June 2007.

8. Simulation des Grandes Echelles d’ecoulements en cavite rotor-stator fermee, GDR “Structurede la Turbulence et Melange” & DYCOEC, Marseilles, 21 May 2007

9. Ecoulements de type rotor-stator soumis a un flux: de Batchelor a Stewartson, GDR Structurede la Turbulence et Melange, Nantes, 10 November 2005

10. Ecoulements tournants: de Batchelor a Stewartson, 17eme Congres Francais de Mecanique,Troyes, 1 September 2005

Posters

1. Instabilites thermo-convectives dans un systeme de Taylor-Couette de grand allongement parsimulations numeriques directes, XII Colloque Franco-Quebecois sur la Thermique des Systemes,Sherbrooke, 9 June 2015

2. Numerical study of the transition in counter-rotating Taylor-Couette flow for a wide gap, 18thInternational Couette-Taylor Workshop ICTW18, Twente, 24-26 June 2013 (best poster award)

3. Transferts de chaleur et de masse dans des ecoulements turbulents de Taylor-Couette avec flux,Congres Francais de Thermique SFT 2013, Gerardmer, 28-31 May 2013

4. Transition mechanisms to turbulence in a cylindrical rotor-stator cavity by pseudo-spectral sim-ulations of Navier-Stokes equations, Chaos, Complexity and Transport, Marseilles, 25 May 2011

15

5. Simulation numerique d’un ecoulement de convection mixte en aval d’une marche, 14emesJournees Internationales de Thermiques (JITH2009), Djerba, 28 March 2009

6. Modelisation de la turbulence dans un systeme de Taylor-Couette differentiellement chauffe avecflux axial, 14e Journees Internationales de Thermiques (JITH2009), Djerba, 28 March 2009

7. Ecoulements tournants: de Batchelor a Stewartson, Observer, Analyser, Modeliser, dans lesmilieux fluides complexes, EGIM, Marseilles, 31 January 2005

8. Ecoulements tournants: de Batchelor a Stewartson, Journee de l’Ecole Doctorale ED353, Mar-seilles, 18 November 2004

9. Experimental study of rotor-stator flows with centripetal fluxes, XXI International Congress ofTheoretical and Applied Mechanics, Warsaw, 20 August 2004

Consulting experience

� Reviewer for international journals: Energy and Buildings, Phys. Fluids, Journal of Fluid Engi-neering, Int. J. Heat Fluid Flow, Int. J. Thermal Sciences, Experiments in Fluids, RheologicaActa, Langmuir, Applied Thermal Engineering, J. Fluid Mech., Int. J. Heat Mass Transfer . . . andfor national or international conferences: Congres Francais de Mecanique, Congres Francais deThermique SFT, Transactions ASME, CIFQ, ICHTD . . . for the Executive Agency for HigherEducation, Research, Development and Innovation Funding (UEFISCDI) of Romania, PEERSprojects of AIRD, National Science Center of Poland, NSERC in Canada . . .

Miscellaneous

� Chairman of the “Syst`mes et procedes energetiques” session, CIFQ, Sherbrooke, 8 June 2015

� Chairman of the “Technology and Science I” session, IJAS Conference, Aix-en-Provence, 7 June2011

� Visiting professor at the University of de Manchester in the “School of Mechanical, Aerospaceand Civil Engineering” Department, with the Prof. B.E. Launder, 3D unsteady structures inturbulent rotor-stator flows, November 2007

16