Upload
others
View
20
Download
0
Embed Size (px)
Citation preview
S Commands
• setinservice, page 9
• show, page 10
• show, page 11
• show aaa, page 12
• show aaa user default-role, page 13
• show adjacency vrf, page 14
• show bfd clients, page 15
• show bfd ipv4 neighbors, page 16
• show bfd ipv6 neighbors, page 17
• show bfd neighbors, page 18
• show cdp all, page 19
• show cdp entry, page 20
• show cdp global, page 21
• show cdp interface, page 22
• show cdp neighbors, page 23
• show cdp traffic interface, page 24
• show clock, page 25
• show copp policy, page 26
• show copp policy stats, page 27
• show copyright, page 28
• show cores, page 29
• show diagnostic content module, page 30
• show diagnostic result module, page 31
• show diagnostic status module, page 32
Cisco ACI Switch Command Reference, NX-OS Release 12.x 1
• show dpp policy, page 33
• show eigrp event vrf, page 34
• show eigrp interfaces, page 35
• show eigrp traffic vrf, page 36
• show eigrp vrf, page 37
• show eigrp vrf, page 38
• show endpoint, page 39
• show environment, page 40
• show environment fex, page 41
• show fcoe, page 42
• show fex, page 43
• show hardware, page 44
• show hostname, page 45
• show hsrp bfd-sessions, page 46
• show hsrp delay, page 47
• show hsrp +, page 48
• show hsrp summary, page 49
• show interface, page 50
• show interface brief, page 51
• show interface capabilities, page 52
• show interface counters, page 53
• show interface counters, page 54
• show interface counters brief, page 55
• show interface counters detailed, page 56
• show interface counters errors, page 57
• show interface counters errors, page 58
• show interface counters snmp, page 59
• show interface counters snmp, page 60
• show interface debounce, page 61
• show interface description, page 62
• show interface fex-fabric, page 63
• show interface flowcontrol, page 64
• show interface flowcontrol, page 65
Cisco ACI Switch Command Reference, NX-OS Release 12.x2
S Commands
• show interface mac-address, page 66
• show interface priority-flow-control, page 67
• show interface snmp-ifindex, page 68
• show interface status, page 69
• show interface status, page 70
• show interface switchport, page 71
• show interface transceiver, page 72
• show interface trunk, page 73
• show interface trunk, page 74
• show inventory, page 75
• show ip arp, page 76
• show ip community-list, page 77
• show ip dhcp client, page 78
• show ip dhcp global statistics, page 79
• show ip dhcp relay, page 80
• show ip extcommunity-list, page 81
• show ip igmp gipo joins, page 82
• show ip igmp interface, page 83
• show ip igmp snooping, page 84
• show ip igmp snooping explicit-tracking, page 85
• show ip igmp snooping groups + +, page 86
• show ip igmp snooping lookup-mode, page 87
• show ip igmp snooping mrouter, page 88
• show ip igmp snooping querier, page 89
• show ip igmp snooping statistics, page 90
• show ip igmp vrf all, page 91
• show ip interface, page 92
• show ip mroute, page 93
• show ip ospf database, page 94
• show ip ospf database detail, page 96
• show ip ospf interface, page 98
• show ip ospf neighbors, page 99
• show ip ospf neighbors vrf, page 100
Cisco ACI Switch Command Reference, NX-OS Release 12.x 3
S Commands
• show ip ospf route vrf, page 101
• show ip ospf summary-address vrf, page 102
• show ip ospf traffic, page 103
• show ip ospf vrf, page 104
• show ip pim group-range, page 105
• show ip pim interface, page 106
• show ip pim neighbor, page 107
• show ip pim oif-list, page 108
• show ip pim route, page 109
• show ip pim rp, page 110
• show ip pim statistics, page 111
• show ip prefix-list, page 112
• show ip process, page 113
• show ip route, page 114
• show ip static-route, page 116
• show ipv6 dhcp relay, page 117
• show ipv6 icmp adjacency, page 118
• show ipv6 icmp interface, page 119
• show ipv6 interface, page 120
• show ipv6 mld snooping, page 121
• show ipv6 mld snooping explicit-tracking, page 122
• show ipv6 mld snooping groups, page 123
• show ipv6 mld snooping lookup-mode, page 124
• show ipv6 mld snooping mrouter, page 125
• show ipv6 mld snooping querier, page 126
• show ipv6 mld snooping statistics, page 127
• show ipv6 nd interface, page 128
• show ipv6 prefix-list, page 129
• show ipv6 process, page 130
• show ipv6 route + vrf, page 131
• show ipv6 static-route, page 133
• show isis adjacency vrf, page 134
• show isis database vrf, page 135
Cisco ACI Switch Command Reference, NX-OS Release 12.x4
S Commands
• show isis dteps vrf, page 136
• show isis interface vrf, page 137
• show isis protocol vrf, page 138
• show isis route vrf, page 139
• show isis statistics vrf, page 140
• show isis traffic vrf, page 141
• show lacp counters, page 142
• show lacp interface, page 143
• show lacp neighbor, page 144
• show lacp port-channel, page 145
• show lacp system-identifier, page 146
• show lldp dcbx interface, page 147
• show lldp entry, page 148
• show lldp interface, page 149
• show lldp neighbors, page 150
• show lldp timers, page 151
• show lldp tlv-select, page 152
• show lldp traffic, page 153
• show locator-led status, page 154
• show logging ip access-list cache, page 155
• show logging ip access-list drop-codes, page 156
• show logging ip access-list span, page 157
• show mac address-table +, page 158
• show module, page 159
• show module fex, page 160
• show npv external-interface-usage, page 161
• show npv flogi-table, page 162
• show npv flogi-table interface, page 163
• show npv status, page 164
• show npv traffic-map, page 165
• show ntp authentication-keys, page 166
• show ntp authentication-status, page 167
• show ntp peer-status, page 168
Cisco ACI Switch Command Reference, NX-OS Release 12.x 5
S Commands
• show ntp peers, page 169
• show ntp statistics peer ipaddr, page 170
• show ntp trusted-keys, page 171
• show ospfv3 database, page 172
• show ospfv3 database detail, page 174
• show ospfv3 interface, page 176
• show ospfv3 neighbors, page 177
• show ospfv3 neighbors vrf, page 178
• show ospfv3 route vrf, page 179
• show ospfv3 summary-address vrf, page 180
• show ospfv3 traffic, page 181
• show ospfv3 vrf, page 182
• show port-channel capacity, page 183
• show port-channel database, page 184
• show port-channel extended, page 185
• show port-channel summary, page 186
• show port-channel traffic, page 187
• show port-channel usage, page 188
• show porttrack, page 189
• show processes, page 190
• show processes cpu, page 191
• show processes cpu sort, page 192
• show processes memory, page 193
• show radius-server, page 194
• show redundancy status, page 195
• show route-map, page 196
• show san-port-channel database, page 197
• show san-port-channel summary, page 198
• show san-port-channel usage, page 199
• show service copy info, page 200
• show service redir info, page 201
• show snmp, page 202
• show snmp community, page 203
Cisco ACI Switch Command Reference, NX-OS Release 12.x6
S Commands
• show snmp context, page 204
• show snmp engineID, page 205
• show snmp host, page 206
• show snmp summary, page 207
• show snmp user, page 208
• show sprom, page 209
• show switchname, page 210
• show system error-id, page 211
• show system redundancy status, page 212
• show system reset-reason, page 213
• show system reset-reason fex, page 214
• show system resources, page 215
• show system uptime, page 216
• show tacacs-server, page 217
• show users, page 218
• show version, page 219
• show version module, page 220
• show vlan, page 221
• show vlan all-ports, page 222
• show vlan brief, page 223
• show vlan fcoe, page 224
• show vlan id, page 225
• show vlan reserved, page 226
• show vlan summary, page 227
• show vpc, page 228
• show vpc consistency-parameters, page 229
• show vpc peer-keepalive, page 230
• show vpc role, page 231
• show vpc statistics peer-keepalive, page 232
• show vpc statistics vpc, page 233
• show vrf, page 234
• show vrf interface, page 235
• show vsan, page 236
Cisco ACI Switch Command Reference, NX-OS Release 12.x 7
S Commands
• show vsan membership, page 237
• show vsan membership interface, page 238
• show vsan usage, page 239
• show zoning-filter, page 240
• show zoning-rule +, page 241
Cisco ACI Switch Command Reference, NX-OS Release 12.x8
S Commands
setinservicesetinservice
Syntax Description Put the node ports back in service.setinservice
Cisco ACI Switch Command Reference, NX-OS Release 12.x 9
S Commandssetinservice
showshow { { ip eigrp neighbors [detail] {iface0 | { [ address ] vrf {vrf-name| all} }}} | { ipv6 eigrp neighbors[detail] {iface0 | { [ ipv6-address] vrf {vrf-name| all} }}}}
Syntax Description Show running system information.show
Display EIGRP information for IPv4 address family.ip
Display EIGRP information for IPv6 address family.ipv6
Show EIGRP information.eigrp
Display information on EIGRP neighbors (peers).neighbors
Show detailed Information on Neighbors.detail
Show Peers on this interface only. The type is interface. The values are ethernet,port-channel, vlan, loopback.
iface0
Peer Address. The type is ipaddr.address
ipv6 Peer Address. The type is ipv6.ipv6-address
Show EIGRP information per-VRF.vrf
Name of the VRF. The type is string.vrf-name
Show EIGRP information for all VRF.all
Cisco ACI Switch Command Reference, NX-OS Release 12.x10
S Commandsshow
showshow [path]
Syntax Description Show Command.show
directory of the mo. The type is string.path
Cisco ACI Switch Command Reference, NX-OS Release 12.x 11
S Commandsshow
show aaashow aaa {authentication | groups}
Syntax Description Show Information.show
aaa.aaa
Authentication.authentication
Groups.groups
Cisco ACI Switch Command Reference, NX-OS Release 12.x12
S Commandsshow aaa
show aaa user default-roleshow aaa user default-role
Syntax Description Show Information.show
aaa.aaa
User.user
Default role assigned by aaa-admin for remote authentication.default-role
Cisco ACI Switch Command Reference, NX-OS Release 12.x 13
S Commandsshow aaa user default-role
show adjacency vrfshow { ip | ipv6 } adjacency [ { interface | ip-addr } ] [ detail | summary | non-best ] vrf { vrf-name | all }
Syntax Description Show running system information.show
Display IP information.ip
Display IPv6 information.ipv6
Display adjacency table.adjacency
Display specific interface adjacencies only. The type is interface.interface
Show adjacency summary.summary
IPV4 source address. The type is ipaddr.ip-addr
Show both best/non-best entries.non-best
Show detail information of adjacency entries.detail
Display per-VRF information.vrf
VRF name. The type is string.vrf-name
Show adjacency entries for all vrfs.all
Cisco ACI Switch Command Reference, NX-OS Release 12.x14
S Commandsshow adjacency vrf
show bfd clientsshow bfd clients
Syntax Description Show running system information.show
BFD commands.bfd
Bfd client list.clients
Cisco ACI Switch Command Reference, NX-OS Release 12.x 15
S Commandsshow bfd clients
show bfd ipv4 neighborsshow bfd ipv4 neighbors [{modulemodule_no}] [{interface intf_id}] [{application bfd_cli_client_names}][{src-ip src_ip}] [{dest-ip dest_ip}] [{vrf {vrf-name | all}}] [details] [sort-by {src-ip | dest-ip | interface}]
Syntax Description Show running system information.show
BFD commands.bfd
Ipv4 neighbors.ipv4
Neighbors.neighbors
Module.module
module number. The type is uinteger. to 32. The range is from 0module_no
Interface.interface
show bfd sessions based on interface id. The type is interface. Thevalues are ethernet, loopback, vlan, tunnel.
intf_id
Application.application
Application name. The type is string.bfd_cli_client_names
Source ip.src-ip
Source ip value. The type is ipaddr.src_ip
Destination ip.dest-ip
Destination ip value. The type is ipaddr.dest_ip
Display per-VRF information.vrf
VRF name. The type is string.vrf-name
Display information for all VRFs.all
Details.details
Sort by.sort-by
Cisco ACI Switch Command Reference, NX-OS Release 12.x16
S Commandsshow bfd ipv4 neighbors
show bfd ipv6 neighborsshow bfd ipv6 neighbors [{modulemodule_no}] [{interface intf_id}] [{application bfd_cli_client_names}][{src-ip src_ipv6}] [{dest-ip dest_ipv6}] [{vrf {vrf-name | all}}] [details] [sort-by {src-ip | dest-ip | interface}]
Syntax Description Show running system information.show
BFD commands.bfd
Ipv6 neighbors.ipv6
Neighbors.neighbors
Module.module
module number. The type is uinteger. to 32. The range is from 0module_no
Interface.interface
show bfd sessions based on interface id. The type is interface. Thevalues are ethernet, loopback, vlan, tunnel.
intf_id
Application.application
Application name. The type is string.bfd_cli_client_names
Source ip.src-ip
Source ipv6 value. The type is ipv6.src_ipv6
Destination ip.dest-ip
Destination ipv6 value. The type is ipv6.dest_ipv6
Display per-VRF information.vrf
VRF name. The type is string.vrf-name
Display information for all VRFs.all
Details.details
Sort by.sort-by
Cisco ACI Switch Command Reference, NX-OS Release 12.x 17
S Commandsshow bfd ipv6 neighbors
show bfd neighborsshow bfd neighbors [{module module_no}] [{interface intf_id}] [{application bfd_cli_client_names}][{src-ip src_ip}] [{dest-ip dest_ip}] [{vrf {vrf-name | all}}] [details] [sort-by {src-ip | dest-ip | interface}]
Syntax Description Show running system information.show
BFD commands.bfd
Neighbors.neighbors
Module.module
module number. The type is uinteger. to 32. The range is from 0module_no
Interface.interface
show bfd sessions based on interface id. The type is interface. Thevalues are ethernet, loopback, vlan, tunnel.
intf_id
Application.application
Application name. The type is string.bfd_cli_client_names
Source ip.src-ip
Source ip value. The type is ipaddr.src_ip
Source ipv6 value. The type is ipv6.src_ipv6
Destination ip.dest-ip
Destination ip value. The type is ipaddr.dest_ip
Destination ipv6 value. The type is ipv6.dest_ipv6
Display per-VRF information.vrf
VRF name. The type is string.vrf-name
Display information for all VRFs.all
Details.details
Sort by.sort-by
Cisco ACI Switch Command Reference, NX-OS Release 12.x18
S Commandsshow bfd neighbors
show cdp allshow cdp all
Syntax Description Show running system information.show
Show Cisco Discovery Protocol information.cdp
Show all interfaces in CDP database.all
Cisco ACI Switch Command Reference, NX-OS Release 12.x 19
S Commandsshow cdp all
show cdp entryshow cdp entry { all | { name dev-id } }
Syntax Description Show running system information.show
Show Cisco Discovery Protocol information.cdp
Show CDP entries in database.entry
Show all CDP entries in database.all
Show a specific CDP entry matching a name.name
Device ID (Max Size 256). The type is string.dev-id
Cisco ACI Switch Command Reference, NX-OS Release 12.x20
S Commandsshow cdp entry
show cdp globalshow cdp global
Syntax Description Show running system information.show
Show Cisco Discovery Protocol information.cdp
Show CDP global parameters.global
Cisco ACI Switch Command Reference, NX-OS Release 12.x 21
S Commandsshow cdp global
show cdp interfaceshow cdp interface arg0
Syntax Description Show running system information.show
Show Cisco Discovery Protocol information.cdp
Show CDP parameters for an interface.interface
Interface. The type is interface. The values are ethernet, mgmt.arg0
Cisco ACI Switch Command Reference, NX-OS Release 12.x22
S Commandsshow cdp interface
show cdp neighborsshow cdp neighbors [ { interface arg0 } ] [ detail ]
Syntax Description Show running system information.show
Show Cisco Discovery Protocol information.cdp
Show CDP neighbors.neighbors
Show CDP neighbors on an interface.interface
Interface. The type is interface. The values are ethernet, mgmt.arg0
Show CDP neighbors detailed.detail
Cisco ACI Switch Command Reference, NX-OS Release 12.x 23
S Commandsshow cdp neighbors
show cdp traffic interfaceshow cdp traffic interface arg0
Syntax Description Show running system information.show
Show Cisco Discovery Protocol information.cdp
Show cdp traffic statistics.traffic
Show cdp traffic statistics on an interface.interface
Interface. The type is interface. The values are ethernet, mgmt.arg0
Cisco ACI Switch Command Reference, NX-OS Release 12.x24
S Commandsshow cdp traffic interface
show clockshow clock
Syntax Description Show running system information.show
Display current Date.clock
Cisco ACI Switch Command Reference, NX-OS Release 12.x 25
S Commandsshow clock
show copp policyshow copp policy
Syntax Description Show running system information.show
Control Plane Policing (CoPP) information.copp
CoPP policies.policy
Cisco ACI Switch Command Reference, NX-OS Release 12.x26
S Commandsshow copp policy
show copp policy statsshow copp policy stats
Syntax Description Show running system information.show
Control Plane Policing (CoPP) information.copp
CoPP policies.policy
CoPP policies packet statistics.stats
Cisco ACI Switch Command Reference, NX-OS Release 12.x 27
S Commandsshow copp policy stats
show copyrightshow copyright
Syntax Description Show running system information.show
Copyright information.copyright
Cisco ACI Switch Command Reference, NX-OS Release 12.x28
S Commandsshow copyright
show coresshow cores [history]
Syntax Description Show information.show
Show all core dumps for the current vdc.cores
Show core dumps history.history
Cisco ACI Switch Command Reference, NX-OS Release 12.x 29
S Commandsshow cores
show diagnostic content moduleshow diagnostic content module { all | module_id }
Syntax Description Show information.show
Diagnostic commands.diagnostic
Show diagnostic test content.content
Module Keyword.module
Select all module ID.all
Module ID. The type is string.module_id
Cisco ACI Switch Command Reference, NX-OS Release 12.x30
S Commandsshow diagnostic content module
show diagnostic result moduleshow diagnostic result module { all | { module_id [ { test test_id } ] } } [detail]
Syntax Description Show information.show
Diagnostic commands.diagnostic
Show diagnostic test result.result
Module Keyword.module
Select all module ID.all
Diagnostic test selection.test
Detailed result.detail
Module ID. The type is string.module_id
Test ID. The type is string.test_id
Cisco ACI Switch Command Reference, NX-OS Release 12.x 31
S Commandsshow diagnostic result module
show diagnostic status moduleshow diagnostic status module module_id
Syntax Description Show information.show
Diagnostic commands.diagnostic
Show test status(running/enqueued).status
<1-30> Module number.module
Module ID. The type is string.module_id
Cisco ACI Switch Command Reference, NX-OS Release 12.x32
S Commandsshow diagnostic status module
show dpp policyshow dpp policy
Syntax Description Show running system information.show
Data Plane Policing (DPP) information.dpp
DPP policies.policy
Cisco ACI Switch Command Reference, NX-OS Release 12.x 33
S Commandsshow dpp policy
show eigrp event vrfshow {ip|ipv6} eigrp event vrf {vrf-name | all}
Syntax Description Show running system information.show
Display IP information.ip
Display IPv6 information.ipv6
Display EIGRP status and configuration.eigrp
IP-EIGRP Events.event
Virtual Router Context.vrf
The type is string. VRF name.vrf-name
Display information for all VRFs.all
Cisco ACI Switch Command Reference, NX-OS Release 12.x34
S Commandsshow eigrp event vrf
show eigrp interfacesshow { ip | ipv6 } eigrp interfaces [brief] { arg0 | { vrf { all | vrf-name } } }
Syntax Description Show running system information.show
Display EIGRP information for IPv4 address family.ip
Display EIGRP information for IPv6 address family.ipv6
Show EIGRP information.eigrp
Display information on EIGRP enabled interface.interfaces
Show only Brief information.brief
Interface. The type is interface. The values are ethernet, port-channel, vlan,loopback.
arg0
Show EIGRP information per-VRF.vrf
Show EIGRP information for all VRF.all
Name of the VRF. The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x 35
S Commandsshow eigrp interfaces
show eigrp traffic vrfshow { ip | ipv6 } eigrp traffic vrf { all | vrf-name }
Syntax Description Show running system information.show
Display EIGRP information for IPv4 address family.ip
Display EIGRP information for IPv6 address family.ipv6
Show EIGRP information.eigrp
Display EIGRP traffic Statistics.traffic
Show EIGRP information for a VRF.vrf
Show EIGRP information for all VRFs.all
Name of the VRF. The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x36
S Commandsshow eigrp traffic vrf
show eigrp vrfshow {ip|ipv6} eigrp [detail] vrf {vrf-name | all}
Syntax Description Show running system information.show
Display IP information.ip
Display IPv6 information.ipv6
Display EIGRP status and configuration.eigrp
Display detailed information.detail
Virtual Router Context.vrf
The type is string. VRF name.vrf-name
Display information for all VRFs.all
Cisco ACI Switch Command Reference, NX-OS Release 12.x 37
S Commandsshow eigrp vrf
show eigrp vrfshow { ip | ipv6 } eigrp {topology | route} [prefix | ipv6-prefix | active | pending | zero-successors | all-links]vrf {vrf-name | all}
Syntax Description Show running system information.show
Display EIGRP information for IPv4 address family.ip
Show EIGRP information.eigrp
Display information on EIGRP topology (routes).topology
Display information on EIGRP routes.route
Show Information on Active Routes only.active
Show Information on only the Routes pending on any replies.pending
Show Information on only the Routes having Zero Successors.zero-successors
Show all Nexthops of a Route, not just Feasible Successors.all-links
Show information on this Prefix only. The type is ipprefix.prefix
Show information on this ipv6 Prefix only. The type is ipv6_prefix.ipv6-prefix
Show EIGRP information per-VRF.vrf
Name of the VRF. The type is string.vrf-name
Show EIGRP information for all VRF.all
Display EIGRP information for IPv6 address family.ipv6
Cisco ACI Switch Command Reference, NX-OS Release 12.x38
S Commandsshow eigrp vrf
show endpointshow endpoint [ { { macmac-addr } | { ip ip-addr | ipv6-addr} [ detail ] } | { [ { vrf vrf-name } | { vlan vlan-id} | { interface interface-name } ] [ { summary | detail } ] } ]
Syntax Description End point commands.show
End point.endpoint
Mac address information.mac
IPv4/IPv6 address information.ip
VRF.vrf
VLAN.vlan
Interface.interface
Endpoint summary information.summary
Endpoint detailed information.detail
MAC Address. The type is ethernet.mac-addr
IP address. The type is ipaddr.ip-addr
IPV6 address. The type is ipv6.ipv6-addr
VRF Name. The type is string.vrf-name
VLAN ID. The type is integer. The range is from 1 to 4095.vlan-id
Interface name. The type is interface.interface-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x 39
S Commandsshow endpoint
show environmentshow environment [ fan | power | temperature ]
Syntax Description Show Information.show
Environment Information.environment
Fan Information.fan
Power supply Information.power
Sensor Temperature Information.temperature
In the command output of the show environment power command, the Total Power Allocated (budget)summary data will be provided only for Cisco Nexus 9504, 9508, and 9516 modular spine switches. TheTotal Power Allocated (budget) summary data will not be provided for Cisco Nexus 9336 fixed spineswitches or for leaf switches.
Note
Cisco ACI Switch Command Reference, NX-OS Release 12.x40
S Commandsshow environment
show environment fexshow environment fex { fexid | all } [ { fan | power | temperature } ]
Syntax Description Show running system information.show
System environment information.environment
Show fex environment information.fex
FEX number. The type is integer. The range is from 101 to 164.fexid
Show information for all FEX.all
Fan information.fan
Power capacity and power distribution information.power
Temperature sensor information.temperature
Cisco ACI Switch Command Reference, NX-OS Release 12.x 41
S Commandsshow environment fex
show fcoeshow fcoe [ database ]
Syntax Description Show running system information.show
Show FCOE paramaters.fcoe
Show FCOE database.database
Cisco ACI Switch Command Reference, NX-OS Release 12.x42
S Commandsshow fcoe
show fexshow fex [ { fexid [detail | version | transceiver] } | detail ]
Syntax Description Show running system information.show
Show FEX information.fex
Detailed information.detail
Show FEX.transceiver
Show the software version.version
FEX number. The type is integer. The range is from 101 to 164.fexid
Cisco ACI Switch Command Reference, NX-OS Release 12.x 43
S Commandsshow fex
show hardwareshow hardware
Syntax Description Show running system information.show
Show hardware information.hardware
Cisco ACI Switch Command Reference, NX-OS Release 12.x44
S Commandsshow hardware
show hostnameshow hostname
Syntax Description Show running system information.show
Hostname.hostname
Cisco ACI Switch Command Reference, NX-OS Release 12.x 45
S Commandsshow hostname
show hsrp bfd-sessionsshow hsrp bfd-sessions [interface interface-id [to {addr_v4 | addr_v6}]] [ipv4 | ipv6]
Syntax Description Show running system information.show
Hot Standby Router Protocol (HSRP) information.hsrp
BFD sessions.bfd-sessions
Interface.interface
The type is interface. Interface. The values are ethernet, port-channel, vlan.interface-id
To IP address.to
IPv4 destination address for BFD session. The type is ipaddr.addr_v4
IPv6 destination address for BFD session. The type is ipv6.addr_v6
IPv4 groups only.ipv4
IPv6 groups only.ipv6
Cisco ACI Switch Command Reference, NX-OS Release 12.x46
S Commandsshow hsrp bfd-sessions
show hsrp delayshow hsrp delay [{interface interface-id}]
Syntax Description Show running system information.show
Hot Standby Router Protocol (HSRP) information.hsrp
Groups on this interface.interface
The type is interface. Interface. The values are ethernet, port-channel, vlan.interface-id
Group initialisation delay.delay
Cisco ACI Switch Command Reference, NX-OS Release 12.x 47
S Commandsshow hsrp delay
show hsrp +show hsrp [{interface interface-id}] [{group group-number}] [{active | init | learn | listen | speak | standby}]+ [all] [{brief [all1]} | {stats}] [{ipv4 | ipv6}]
Syntax Description Show running system information.show
Hot Standby Router Protocol (HSRP) information.hsrp
Groups on this interface.interface
The type is interface. Interface. The values are ethernet, port-channel,vlan.
interface-id
Groups in active state.active
Groups in init state.init
Groups in learn state.learn
Groups in listen state.listen
Groups in speak state.speak
Groups in standby state.standby
Group number.group
The type is integer. Group Number. The range is from 0 to 4095.group-number
Include groups in disabled state.all
Brief output.brief
HSRP packet stats output.stats
HSRP V4 Groups.ipv4
HSRP V6 Groups.ipv6
Brief output.all1
Cisco ACI Switch Command Reference, NX-OS Release 12.x48
S Commandsshow hsrp +
show hsrp summaryshow hsrp summary
Syntax Description Show running system information.show
Hot Standby Router Protocol (HSRP) information.hsrp
Show HSRP summary.summary
Cisco ACI Switch Command Reference, NX-OS Release 12.x 49
S Commandsshow hsrp summary
show interfaceshow interface [ arg0 ]
Syntax Description Show running system information.show
Interface.interface
Interface. The type is interface_mrange.arg0
Cisco ACI Switch Command Reference, NX-OS Release 12.x50
S Commandsshow interface
show interface briefshow interface [ arg0 ] brief
Syntax Description Show running system information.show
Interface.interface
Interface. The type is interface_mrange.arg0
Show brief info of interface.brief
Cisco ACI Switch Command Reference, NX-OS Release 12.x 51
S Commandsshow interface brief
show interface capabilitiesshow interface [ arg0 ] capabilities
Syntax Description Show running system information.show
Interface.interface
Ethernet Interface. The type is interface_mrange. The values are ethernet.arg0
Show interface capabilities information.capabilities
Cisco ACI Switch Command Reference, NX-OS Release 12.x52
S Commandsshow interface capabilities
show interface countersshow interface arg0 counters
Syntax Description Show running system information.show
Show interface status and information.interface
Interface. The type is interface_mrange. The values are ethernet, port-channel,vlan, mgmt, vfc, vfc-port-channel.
arg0
Show interface counters.counters
Cisco ACI Switch Command Reference, NX-OS Release 12.x 53
S Commandsshow interface counters
show interface countersshow interface counters [ { fex fex-id } | { module mod-id } ]
Syntax Description Show running system information.show
Show interface status and information.interface
Show interface counters.counters
Enter fex ID.fex
Enter FEX number. The type is integer. The range is from 101 to 164.fex-id
Limit display to interfaces on module.module
Enter module number. The type is integer. The range is from 1 to 30.mod-id
Cisco ACI Switch Command Reference, NX-OS Release 12.x54
S Commandsshow interface counters
show interface counters briefshow interface arg0 counters brief
Syntax Description Show running system information.show
Show interface status and information.interface
Interface. The type is interface_mrange. The values are ethernet, port-channel,vfc, vfc-port-channel.
arg0
Show interface counters.counters
Show interface counters in brief.brief
Cisco ACI Switch Command Reference, NX-OS Release 12.x 55
S Commandsshow interface counters brief
show interface counters detailedshow interface [ arg0 ] counters detailed [ { all [ snmp ] } | snmp ]
Syntax Description Show running system information.show
Show interface status and information.interface
Interface. The type is interface_mrange. The values are ethernet, port-channel,vlan, mgmt, vfc, vfc-port-channel.
arg0
Show interface counters.counters
Show only non-zero counters.detailed
Show every interface counter.all
Show SNMP MIB values.snmp
Cisco ACI Switch Command Reference, NX-OS Release 12.x56
S Commandsshow interface counters detailed
show interface counters errorsshow interface arg0 counters errors
Syntax Description Show running system information.show
Show interface status and information.interface
Interface. The type is interface_mrange. The values are ethernet, port-channel,mgmt.
arg0
Show interface counters.counters
Show interface error counters.errors
Cisco ACI Switch Command Reference, NX-OS Release 12.x 57
S Commandsshow interface counters errors
show interface counters errorsshow interface counters errors [ { fex fex-id } | { module mod-id } ]
Syntax Description Show running system information.show
Show interface status and information.interface
Show interface counters.counters
Show interface error counters.errors
Enter fex ID.fex
Enter FEX number. The type is integer. The range is from 101 to 164.fex-id
Limit display to interfaces on module.module
Enter module number. The type is integer. The range is from 1 to 30.mod-id
Cisco ACI Switch Command Reference, NX-OS Release 12.x58
S Commandsshow interface counters errors
show interface counters snmpshow interface arg0 counters snmp
Syntax Description Show running system information.show
Show interface status and information.interface
Interface. The type is interface_mrange. The values are ethernet, port-channel,vlan, mgmt.
arg0
Show interface counters.counters
Show SNMP MIB values.snmp
Cisco ACI Switch Command Reference, NX-OS Release 12.x 59
S Commandsshow interface counters snmp
show interface counters snmpshow interface counters snmp [ { fex fex-id } | { module mod-id } ]
Syntax Description Show running system information.show
Show interface status and information.interface
Show interface counters.counters
Show SNMP MIB values.snmp
Enter fex ID.fex
Enter FEX number. The type is integer. The range is from 101 to 164.fex-id
Limit display to interfaces on module.module
Enter module number. The type is integer. The range is from 1 to 30.mod-id
Cisco ACI Switch Command Reference, NX-OS Release 12.x60
S Commandsshow interface counters snmp
show interface debounceshow interface [ arg0 ] debounce
Syntax Description Show running system information.show
Show interface status and information.interface
Interface. The type is interface_mrange. The values are ethernet.arg0
Show interface debounce time information.debounce
Cisco ACI Switch Command Reference, NX-OS Release 12.x 61
S Commandsshow interface debounce
show interface descriptionshow interface [ arg0 ] description
Syntax Description Show running system information.show
Interface.interface
Interface. The type is interface_mrange.arg0
Show interface description.description
Cisco ACI Switch Command Reference, NX-OS Release 12.x62
S Commandsshow interface description
show interface fex-fabricshow interface fex-fabric
Syntax Description Show running system information.show
Show interface status and information.interface
Show all FEX fabric ports.fex-fabric
Cisco ACI Switch Command Reference, NX-OS Release 12.x 63
S Commandsshow interface fex-fabric
show interface flowcontrolshow interface arg0 flowcontrol
Syntax Description Show running system information.show
Show interface status and information.interface
Interface. The type is interface_mrange. The values are ethernet, port-channel.arg0
Show interface flowcontrol information.flowcontrol
Cisco ACI Switch Command Reference, NX-OS Release 12.x64
S Commandsshow interface flowcontrol
show interface flowcontrolshow interface flowcontrol [ { fex fex-id } | { module mod-id } ]
Syntax Description Show running system information.show
Show interface status and information.interface
Show interface flowcontrol information.flowcontrol
Limit display to interfaces on a FEX.fex
Enter FEX number. The type is integer. The range is from 101 to 164.fex-id
Limit display to interfaces on module.module
Enter module number. The type is integer. The range is from 1 to 30.mod-id
Cisco ACI Switch Command Reference, NX-OS Release 12.x 65
S Commandsshow interface flowcontrol
show interface mac-addressshow interface [ arg0 ] mac-address
Syntax Description Show running system information.show
Show interface status and information.interface
Interface. The type is interface_mrange. The values are ethernet, port-channel,vlan, mgmt.
arg0
Show interface MAC address.mac-address
Cisco ACI Switch Command Reference, NX-OS Release 12.x66
S Commandsshow interface mac-address
show interface priority-flow-controlshow interface [ arg0 ] priority-flow-control [ details ]
Syntax Description Show running system information.show
Show interface status and information.interface
Ethernet Interface. The type is interface_mrange. The values are ethernet.arg0
Show interface PFC information.priority-flow-control
Show interface PFC detail information.details
Cisco ACI Switch Command Reference, NX-OS Release 12.x 67
S Commandsshow interface priority-flow-control
show interface snmp-ifindexshow interface snmp-ifindex
Syntax Description Show running system information.show
Show interface status and information.interface
Show snmp ifindex list.snmp-ifindex
Cisco ACI Switch Command Reference, NX-OS Release 12.x68
S Commandsshow interface snmp-ifindex
show interface statusshow interface arg0 status [ err-disabled | err-vlans ]
Syntax Description Show running system information.show
Show interface status and information.interface
Interface. The type is interface_mrange. The values are ethernet,port-channel, vlan, mgmt, loopback, tunnel.
arg0
Show interface line status.status
Show interface error disabled state.err-disabled
Show errored vlans.err-vlans
Cisco ACI Switch Command Reference, NX-OS Release 12.x 69
S Commandsshow interface status
show interface statusshow interface status [ down | err-disabled | err-vlans | { fex fex-id } | inactive | { module mod-id } | up ]
Syntax Description Show running system information.show
Show interface status and information.interface
Show interface line status.status
Show interface down state.down
Show interface error disabled state.err-disabled
Show errored vlans.err-vlans
Limit display to interfaces on a FEX.fex
Enter FEX number. The type is integer. The range is from 101 to 164.fex-id
Show interface inactive state.inactive
Limit display to interfaces on module.module
Enter module number. The type is integer. The range is from 1 to 30.mod-id
Show interface up state.up
Cisco ACI Switch Command Reference, NX-OS Release 12.x70
S Commandsshow interface status
show interface switchportshow interface [ arg0 ] switchport
Syntax Description Show running system information.show
Show interface status and information.interface
Interface. The type is interface_mrange. The values are ethernet, port-channel.arg0
Show interface switchport information.switchport
Cisco ACI Switch Command Reference, NX-OS Release 12.x 71
S Commandsshow interface switchport
show interface transceivershow interface [ arg0 ] transceiver [ fex-fabric ] [ calibrations | details | sprom ]
Syntax Description Show Information.show
Interface.interface
Ethernet Interface. The type is interface_mrange. The values are ethernet.arg0
Transceiver Information.transceiver
Show FEX interface transceiver information.fex-fabric
Show interface transceiver calibration information.calibrations
Show interface transceiver detail information.details
Show interface transceiver sprom information.sprom
Cisco ACI Switch Command Reference, NX-OS Release 12.x72
S Commandsshow interface transceiver
show interface trunkshow interface arg0 trunk
Syntax Description Show running system information.show
Show interface status and information.interface
Interface. The type is interface_mrange. The values are ethernet, port-channel.arg0
Show interface trunk information.trunk
Cisco ACI Switch Command Reference, NX-OS Release 12.x 73
S Commandsshow interface trunk
show interface trunkshow interface trunk [ { vlan vlan-id } | { fex fex-id } | { module mod-id } ]
Syntax Description Show running system information.show
Show interface status and information.interface
Show interface trunk information.trunk
Limit display to interfaces on a FEX.fex
Enter FEX number. The type is integer. The range is from 101 to 164.fex-id
Limit display to interfaces on module.module
Enter module number. The type is integer. The range is from 1 to 30.mod-id
Show per vlan information for trunk.vlan
Enter vlan range. The type is integer_mrange. The range is from 1 to 4095.vlan-id
Cisco ACI Switch Command Reference, NX-OS Release 12.x74
S Commandsshow interface trunk
show inventoryshow inventory [ chassis | fans | power_supply | {module [arg0]} ]
Syntax Description Show running system information.show
system inventory information.inventory
system inventory module information.module
system inventory fan information.fans
system inventory chassis information.chassis
system inventory power supply information.power_supply
please enter the module number. The type is integer. The range is from 1to 30.
arg0
Cisco ACI Switch Command Reference, NX-OS Release 12.x 75
S Commandsshow inventory
show ip arpshow ip arp [ { ip-address | detail | static | interface | { summary [interface] } | { statistics [ interface ] } }] [ { vrf { all | vrf-name } } ]
Syntax Description Show running system information.show
Display IP information.ip
Display ARP table and statistics.arp
Display ARP statistics.statistics
Display Static ARP entries.static
Display ARP adjacency summary.summary
Display detailed information.detail
Display per-VRF information.vrf
Display all VRFs.all
Name of the Interface. The type is interface.interface
Ip Address. The type is ipaddr.ip-address
Name of the VRF. The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x76
S Commandsshow ip arp
show ip community-listshow ip community-list [ strarg ]
Syntax Description Show running system information.show
Display IP information.ip
List community-list.community-list
Name of prefix list (Max Size 100). The type is string.strarg
Cisco ACI Switch Command Reference, NX-OS Release 12.x 77
S Commandsshow ip community-list
show ip dhcp clientshow ip dhcp client [ statistics [ { interface intfname } ] ]
Syntax Description Show running system information.show
Display IP information.ip
Show items in DHCP.dhcp
DHCP client.client
Statistics related to DHCP.statistics
DHCP client address of the interface.interface
Slot/chassis number. The type is interface. The values are ethernet,port-channel, vlan, loopback.
intfname
Cisco ACI Switch Command Reference, NX-OS Release 12.x78
S Commandsshow ip dhcp client
show ip dhcp global statisticsshow ip dhcp global statistics
Syntax Description Show running system information.show
Display IP information.ip
Show items in DHCP.dhcp
DHCP global stats.global
Statistics related to DHCP.statistics
Cisco ACI Switch Command Reference, NX-OS Release 12.x 79
S Commandsshow ip dhcp global statistics
show ip dhcp relayshow ip dhcp relay [ { { statistics [ { interface intfname } ] } | { address [ { detail | { interface intfname [detail ] } } ] } | { discover [ { interface intfname } ] } | detail } ]
Syntax Description Show running system information.show
Display IP information.ip
Show items in DHCP.dhcp
DHCP Relay.relay
DHCP relay address.address
DHCP relay node discovery.discover
Statistics related to DHCP.statistics
DHCP relay detailed information.detail
DHCP relay address of the interface.interface
Slot/chassis number. The type is interface. The values are ethernet,port-channel, vlan, loopback.
intfname
Cisco ACI Switch Command Reference, NX-OS Release 12.x80
S Commandsshow ip dhcp relay
show ip extcommunity-listshow ip extcommunity-list [ strarg ]
Syntax Description Show running system information.show
Display IP information.ip
List extcommunity-list.extcommunity-list
Name of prefix list (Max Size 100). The type is string.strarg
Cisco ACI Switch Command Reference, NX-OS Release 12.x 81
S Commandsshow ip extcommunity-list
show ip igmp gipo joinsshow ip igmp gipo joins
Syntax Description Show running system information.show
Display IP information.ip
Display IGMP status and configuration.igmp
Show IGMP gipo information.gipo
Show IGMP gipo Join Summary.joins
Cisco ACI Switch Command Reference, NX-OS Release 12.x82
S Commandsshow ip igmp gipo joins
show ip igmp interfaceshow ip igmp interface [intf] [brief] [vrf {vrf-name | all}]
Syntax Description Show running system information.show
Show IP information.ip
IGMP protocol events.igmp
IGMP Interface.interface
Display neighbors on single interface name. The type is interface. The valuesare brief, ethernet, loopback, port-channel, tunnel, vlan, vrf.
intf
Display properties on single IGMP interface in brief.brief
Display per-VRF information.vrf
VRF name (Max Size 32).vrf-name
Display information for all VRFs.all
Cisco ACI Switch Command Reference, NX-OS Release 12.x 83
S Commandsshow ip igmp interface
show ip igmp snoopingshow ip igmp snooping [ { vlan vlan } ] [ extended ]
Syntax Description Show running system information.show
Show IP information.ip
Show IGMP information.igmp
IGMP Snooping information.snooping
Display Vlan IGMP snooping membership information.vlan
Display Extended Vlan IGMP snooping membership information.extended
Specify vlan-id. The type is integer. The range is from 1 to 4095.vlan
Cisco ACI Switch Command Reference, NX-OS Release 12.x84
S Commandsshow ip igmp snooping
show ip igmp snooping explicit-trackingshow ip igmp snooping explicit-tracking [ { vlan vlan } ] [ encap ] [ extended ]
Syntax Description Show running system information.show
Show IP information.ip
Show IGMP information.igmp
IGMP Snooping information.snooping
Display explicit-tracking database for IGMPv3.explicit-tracking
Display Vlan explicit-tracking database.vlan
Display Encap Vlan explicit-tracking database.encap
Display Extended Vlan explicit-tracking database.extended
Specify vlan-id. The type is integer. The range is from 1 to 4095.vlan
Cisco ACI Switch Command Reference, NX-OS Release 12.x 85
S Commandsshow ip igmp snooping explicit-tracking
show ip igmp snooping groups + +show ip igmp snooping groups [ group | source ]+ [ { vlan vlan } ] [ encap ] [ extended ] [ detail | summary]+
Syntax Description Show running system information.show
Show IP information.ip
Show IGMP information.igmp
Show IGMP Snooping information.snooping
Display snooping information for group address.groups
Multicast IP address of single group to display. The type is ipaddr.group
Source IP address. The type is ipaddr.source
Display detailed information for the group.detail
Display snooping group summary.summary
Display Vlan IGMP snooping membership information.vlan
Display Encap Vlan IGMP snooping membership information.encap
Display Extended Vlan IGMP snooping membership information.extended
Specify vlan-id. The type is integer. The range is from 1 to 4095.vlan
Cisco ACI Switch Command Reference, NX-OS Release 12.x86
S Commandsshow ip igmp snooping groups + +
show ip igmp snooping lookup-modeshow ip igmp snooping lookup-mode [ { vlan vlan } ] [ extended ]
Syntax Description Show running system information.show
Show IP information.ip
Show IGMP information.igmp
IGMP Snooping information.snooping
IGMP Snooping lkup mode information.lookup-mode
Display Vlan information.vlan
Display Extended Vlan IGMP snooping lkup mode information.extended
Specify vlan-id. The type is integer. The range is from 1 to 4095.vlan
Cisco ACI Switch Command Reference, NX-OS Release 12.x 87
S Commandsshow ip igmp snooping lookup-mode
show ip igmp snooping mroutershow ip igmp snooping mrouter [ { vlan vlan } ] [ encap ] [ extended ] [ detail ]
Syntax Description Show running system information.show
Show IP information.ip
Show IGMP information.igmp
IGMP Snooping information.snooping
Display multicast routers detected.mrouter
Display detailed mrouter information.detail
Display Vlan multicast router information.vlan
Display Encap Vlan IGMP snooping mrouter information.encap
Display Extended Vlan IGMP snooping mrouter information.extended
Specify vlan-id. The type is integer. The range is from 1 to 4095.vlan
Cisco ACI Switch Command Reference, NX-OS Release 12.x88
S Commandsshow ip igmp snooping mrouter
show ip igmp snooping queriershow ip igmp snooping querier [ { vlan vlan } ] [ extended ] [ detail ]
Syntax Description Show running system information.show
Show IP information.ip
Show IGMP information.igmp
IGMP Snooping information.snooping
Display snooping querier information.querier
Display detailed information.detail
Display Vlan IGMP snooping querier information.vlan
Display Extended Vlan IGMP snooping Querier information.extended
Specify vlan-id. The type is integer. The range is from 1 to 4095.vlan
Cisco ACI Switch Command Reference, NX-OS Release 12.x 89
S Commandsshow ip igmp snooping querier
show ip igmp snooping statisticsshow ip igmp snooping statistics [ { vlan vlan } ] [ extended ] [ global ]
Syntax Description Show running system information.show
Show IP information.ip
Show IGMP information.igmp
IGMP Snooping information.snooping
Display packet/error counter statistics.statistics
Display global statistics.global
Display vlan statistics.vlan
Display Extended Vlan IGMP snooping statistics information.extended
Specify vlan-id. The type is integer. The range is from 1 to 4095.vlan
Cisco ACI Switch Command Reference, NX-OS Release 12.x90
S Commandsshow ip igmp snooping statistics
show ip igmp vrf allshow ip igmp vrf all
Syntax Description Show running system information.show
Display IP information.ip
Display IGMP status and configuration.igmp
Display per-VRF information.vrf
Display information for all VRFs.all
Cisco ACI Switch Command Reference, NX-OS Release 12.x 91
S Commandsshow ip igmp vrf all
show ip interfaceshow ip interface [ {brief [include-secondary]} | interface | ip-addr ] [ operational ] [ { vrf { all | vrf-name} } ]
Syntax Description Show running system information.show
Display IP information.ip
Display IP related interface information.interface
Show brief info of interface.brief
Display summary of all IP addresses.include-secondary
Display only interfaces that are administratively enabled.operational
Display per-VRF information.vrf
Display all VRFs.all
Name of the Interface. The type is interface. The values are ethernet,port-channel, vlan, mgmt, loopback, tunnel.
interface
Ip Address. The type is ipaddr.ip-addr
Name of the VRF. The type is string.vrf-name
Display interface for local IP address. The type is string.local-addr
Cisco ACI Switch Command Reference, NX-OS Release 12.x92
S Commandsshow ip interface
show ip mrouteshow ip mroute [[detail] | {summary [count | software-forwarded | rpf-failed]} | { [{{group [source][shared-tree | source-tree] }}] {[flags] | [detail] | [summary [software-forwarded | rpf-failed]]}}] [vrf{vrf-name | all}]
Syntax Description Show running system information.show
Show IP information.ip
Display per-VRF information.vrf
Display information for all VRFs.all
Display IP multicast routing table.mroute
Display route counts and packet rates.summary
Display route for *,G entries.shared-tree
Display route for S,G entries.source-tree
Display software switched route counts only.software-forwarded
Display RPF failure statistics.rpf-failed
Source IP address. The type is ipaddr.source
Multicast IP address of single group to display. The type is ipaddr.group
The type is string. VRF name.vrf-name
Display route counts only.count
Display detailed route attributes.detail
Display detailed route attributes.flags
Cisco ACI Switch Command Reference, NX-OS Release 12.x 93
S Commandsshow ip mroute
show ip ospf databaseshow ip ospf database [[[network | asbr-summary | summary | router | opaque-link | opaque-area |nssa-external] [{area area-id-ip}]] | {external [{ext_tag tag_val}]} | opaque-as] [lsid] [self-originated |{adv-router advid} | {adv-router-name adv-name} ] [vrf {vrf-name | all}]
Syntax Description Show running system information.show
Display IP information.ip
Display OSPF status and configuration.ospf
Link-state Database Summary.database
Display network LSAs.network
Display type 4 (asbr-summary) LSAs.asbr-summary
Display type 3 (network-summary) LSAs.summary
Display router LSAs.router
Display Opaque Link-Local LSAs.opaque-link
Display Opaque Area LSAs.opaque-area
Display type 7 (NSSA external) LSAs.nssa-external
Display only LSA's in this area.area
The type is ipaddr. Area Id as an integer or ip address.area-id-ip
Display type 5 (external) LSAs.external
Restrict display by tag.ext_tag
The type is uinteger. 32-bit tag value.tag_val
Display Opaque AS LSAs.opaque-as
The type is ipaddr. Restrict display by link state ID.lsid
Display only self-originated LSAs.self-originated
Restrict display by Advertising router.adv-router
The type is ipaddr. Advertising router ID.advid
Restrict display by Advertising router name.adv-router-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x94
S Commandsshow ip ospf database
The type is string. DNS Name of the Advertising router.adv-name
Display per-VRF information.vrf
The type is string. VRF name.vrf-name
Display information for all VRFs.all
Cisco ACI Switch Command Reference, NX-OS Release 12.x 95
S Commandsshow ip ospf database
show ip ospf database detailshow ip ospf database [[[network | asbr-summary | summary | router | opaque-link | opaque-area |nssa-external] [{area area-id-ip}]] | {external [{ext_tag tag_val}]} | opaque-as] [lsid] [self-originated |{adv-router advid} | {adv-router-name adv-name} ] detail [vrf {vrf-name | all}]
Syntax Description Show running system information.show
Display IP information.ip
Display OSPF status and configuration.ospf
Link-state Database Summary.database
Display network LSAs.network
Display type 4 (asbr-summary) LSAs.asbr-summary
Display type 3 (network-summary) LSAs.summary
Display router LSAs.router
Display Opaque Link-Local LSAs.opaque-link
Display Opaque Area LSAs.opaque-area
Display type 7 (NSSA external) LSAs.nssa-external
Display only LSA's in this area.area
The type is ipaddr. Area Id as an integer or ip address.area-id-ip
Display type 5 (external) LSAs.external
Restrict display by tag.ext_tag
The type is uinteger. 32-bit tag value.tag_val
Display Opaque AS LSAs.opaque-as
The type is ipaddr. Restrict display by link state ID.lsid
Display only self-originated LSAs.self-originated
Restrict display by Advertising router.adv-router
The type is ipaddr. Advertising router ID.advid
Restrict display by Advertising router name.adv-router-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x96
S Commandsshow ip ospf database detail
The type is string. DNS Name of the Advertising router.adv-name
Display LSA in detail.detail
Display per-VRF information.vrf
The type is string. VRF name.vrf-name
Display information for all VRFs.all
Cisco ACI Switch Command Reference, NX-OS Release 12.x 97
S Commandsshow ip ospf database detail
show ip ospf interfaceshow ip ospf interface { arg0 | { [ brief ] vrf { all | vrf-name } } }
Syntax Description Show running system information.show
Ipv4.ip
Display OSPF status and configuration.ospf
OSPF enabled interface.interface
Interface. The type is interface. The values are ethernet, port-channel, vlan,loopback.
arg0
Display summary of OSPF interfaces.brief
Display per-VRF information.vrf
Display information for all VRFs.all
VRF name (Max Size 32). The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x98
S Commandsshow ip ospf interface
show ip ospf neighborsshow ip ospf neighbors arg0 [ { ip [ detail ] } | detail | summary ] [vrf { all | vrf-name } ]
Syntax Description Show running system information.show
Ipv4.ip
Display OSPF status and configuration.ospf
Neighbor list.neighbors
Router ID of neighbor. The type is ipaddr.ip
Show detailed neighbor display.detail
Interface. The type is interface. The values are ethernet, port-channel, vlan,loopback.
arg0
Summary of neighbors.summary
Display per-VRF information.vrf
Display information for all VRFs.all
VRF name (Max Size 32). The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x 99
S Commandsshow ip ospf neighbors
show ip ospf neighbors vrfshow ip ospf neighbors [ { ip [ detail ] } | detail | summary ] vrf { all | vrf-name }
Syntax Description Show running system information.show
Ipv4.ip
Display OSPF status and configuration.ospf
Neighbor list.neighbors
Router ID of neighbor. The type is ipaddr.ip
Show detailed neighbor display.detail
Summary of neighbors.summary
Display per-VRF information.vrf
Display information for all VRFs.all
VRF name (Max Size 32). The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x100
S Commandsshow ip ospf neighbors vrf
show ip ospf route vrfshow ip ospf route [ summary | { ippfx [ longer-prefixes ] [ summary ] } | ip ] vrf { all | vrf-name }
Syntax Description Show running system information.show
Ipv4.ip
Display OSPF status and configuration.ospf
Internal OSPF routes.route
Show single OSPF route. The type is ipaddr.ip
Show single exact match OSPF route. The type is ipprefix.ippfx
Show route counts.summary
Show exact match and more specific routes.longer-prefixes
Display per-VRF information.vrf
Display information for all VRFs.all
VRF name (Max Size 32). The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x 101
S Commandsshow ip ospf route vrf
show ip ospf summary-address vrfshow ip ospf summary-address vrf { all | vrf-name }
Syntax Description Show running system information.show
Ipv4.ip
Display OSPF status and configuration.ospf
Summary-address redistribution information.summary-address
Display per-VRF information.vrf
Display information for all VRFs.all
VRF name (Max Size 32). The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x102
S Commandsshow ip ospf summary-address vrf
show ip ospf trafficshow ip ospf traffic { arg0 | { vrf { all | vrf-name } } }
Syntax Description Show running system information.show
Ipv4.ip
Display OSPF status and configuration.ospf
Packet counters.traffic
Interface. The type is interface. The values are ethernet, port-channel, vlan,loopback.
arg0
Display per-VRF information.vrf
Display information for all VRFs.all
VRF name (Max Size 32). The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x 103
S Commandsshow ip ospf traffic
show ip ospf vrfshow ip ospf vrf { all | vrf-name }
Syntax Description Show running system information.show
Ipv4.ip
Display OSPF status and configuration.ospf
Display per-VRF information.vrf
Display information for all VRFs.all
VRF name (Max Size 32). The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x104
S Commandsshow ip ospf vrf
show ip pim group-rangeshow ip pim group-range [group] [vrf {vrf-name | all}]
Syntax Description Show running system information.show
Show IP information.ip
Display PIM status and configuration.pim
Display the various group-ranges.group-range
IP address of the group to display. The type is ipaddr.group
Display per-VRF information.vrf
The type is string. VRF name (Max Size 32).vrf-name
Display information for all VRFs.all
Cisco ACI Switch Command Reference, NX-OS Release 12.x 105
S Commandsshow ip pim group-range
show ip pim interfaceshow ip pim interface [intf] [brief] [vrf {vrf-name | all}]
Syntax Description Show running system information.show
Show IP information.ip
Display PIM status and configuration.pim
Display PIM interface related information.interface
Display properties on single PIM interface. The type is interface. The values arebrief, ethernet, loopback, port-channel, tunnel, vlan, vrf.
intf
Display one line status per PIM interface.brief
Display per-VRF information.vrf
The type is string. VRF name (Max Size 32).vrf-name
Display information for all VRFs.all
Cisco ACI Switch Command Reference, NX-OS Release 12.x106
S Commandsshow ip pim interface
show ip pim neighborshow ip pim neighbor {[interface] | [ipaddr]} [vrf {vrf-name | all}]
Syntax Description Show running system information.show
Show IP information.ip
Display PIM status and configuration.pim
Display PIM neighbor related information.neighbor
Display neighbors on single interface name. The type is interface. The valuesare ethernet, loopback, port-channel, tunnel, vlan, vrf.
interface
IP address of single neighbor to display. The type is ipaddr.ipaddr
Display per-VRF information.vrf
The type is string. VRF name (Max Size 32).vrf-name
Display information for all VRFs.all
Cisco ACI Switch Command Reference, NX-OS Release 12.x 107
S Commandsshow ip pim neighbor
show ip pim oif-listshow ip pim oif-list group [source] [vrf {vrf-name | all}]
Syntax Description Show running system information.show
Show IP information.ip
Display PIM status and configuration.pim
Display interfaces for oif-list of PIM route.oif-list
Group address to display. The type is ipaddr.group
Source address to display. The type is ipaddr.source
Display per-VRF information.vrf
The type is string. VRF name (Max Size 32).vrf-name
Display information for all VRFs.all
Cisco ACI Switch Command Reference, NX-OS Release 12.x108
S Commandsshow ip pim oif-list
show ip pim routeshow ip pim route [{group [source]}] [vrf {vrf-name | all }]
Syntax Description Show running system information.show
Show IP information.ip
Display PIM status and configuration.pim
Display PIM route cache.route
Multicast IP address of single group to display. The type is ipaddr.group
Source IP address. The type is ipaddr.source
Display per-VRF information.vrf
The type is string. VRF name (Max Size 32).vrf-name
Display information for all VRFs.all
Cisco ACI Switch Command Reference, NX-OS Release 12.x 109
S Commandsshow ip pim route
show ip pim rpshow ip pim rp [group] [vrf {vrf-name | all}]
Syntax Description Show running system information.show
Show IP information.ip
Display PIM status and configuration.pim
Display PIM RP, Auto-RP, and BSR related information.rp
Display RP for group address. The type is ipaddr.group
Display per-VRF information.vrf
The type is string. VRF name (Max Size 32).vrf-name
Display information for all VRFs.all
Cisco ACI Switch Command Reference, NX-OS Release 12.x110
S Commandsshow ip pim rp
show ip pim statisticsshow ip pim statistics [vrf {vrf-name | all}]
Syntax Description Show running system information.show
Show IP information.ip
Display PIM status and configuration.pim
Display PIM Statistics per-VRF.statistics
Display per-VRF information.vrf
The type is string. VRF name (Max Size 32).vrf-name
Display information for all VRFs.all
Cisco ACI Switch Command Reference, NX-OS Release 12.x 111
S Commandsshow ip pim statistics
show ip prefix-listshow ip prefix-list [ strarg ]
Syntax Description Show running system information.show
Display IP information.ip
List IP prefix lists.prefix-list
Name of prefix list (Max Size 100). The type is string.strarg
Cisco ACI Switch Command Reference, NX-OS Release 12.x112
S Commandsshow ip prefix-list
show ip processshow ip process [ { vrf { all | vrf-name } } ]
Syntax Description Show running system information.show
Display IP information.ip
Display IP global information.process
Display per-VRF information.vrf
Display all VRFs.all
Name of the VRF. The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x 113
S Commandsshow ip process
show ip routeshow ip route { { [ ip-addr | { ip-prefix [{longer-prefixes|shorter-prefixes}] } ] [ bgp | eigrp | ospf ] [ {next-hop nh } | { interface intf } | { updated { [ { since stime } ] [ { until utime } ] } } ]+ [ summary | detail] vrf {vrf-name | all} } | { vrf {vrf-name | all} [ ip-addr | { ip-prefix [{longer-prefixes|shorter-prefixes}] } ][ { next-hop nh } | { interface intf } | { updated { [ { since stime } ] [ { until utime } ] } } ]+ [ summary |detail ] } }
Syntax Description Show running system information.show
Display IP information.ip
Display routing information.route
Display single route longest match lookup. The type is ipaddr.ip-addr
Display single exact match route. The type is ipprefix.ip-prefix
Display matching routes with mask-lengths >= prefix.longer-prefixes
Display matching routes with mask-lengths <= prefix.shorter-prefixes
Display routes with this next-hop only.next-hop
Next hop address. The type is ipaddr.nh
Display routes with this output interface only.interface
Interface Name. The type is interface.intf
Display routes filtered by last updated time.updated
Display those routes updated since this time.since
Since this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]. The type is string.stime
Display those routes updated until this time.until
Until this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]. The type is string.utime
Display route counts.summary
Display routes in full detail.detail
Display per-VRF information.vrf
VRF name. The type is string.vrf-name
bgp
Cisco ACI Switch Command Reference, NX-OS Release 12.x114
S Commandsshow ip route
ospf
eigrp
Display information for all VRFs.all
Cisco ACI Switch Command Reference, NX-OS Release 12.x 115
S Commandsshow ip route
show ip static-routeshow ip static-route [ { vrf { all | vrf-name } } ]
Syntax Description Show running system information.show
Display IP information.ip
Display configured static routes.static-route
Display per-VRF information.vrf
Display all VRFs.all
Name of the VRF. The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x116
S Commandsshow ip static-route
show ipv6 dhcp relayshow ipv6 dhcp relay [ { statistics } | { address [ { detail | { interface intfname [ detail ] } } ] } ]
Syntax Description Show running system information.show
Display IPv6 information.ipv6
Show items in DHCP.dhcp
DHCP Relay.relay
DHCP relay address.address
DHCP relay detailed information.detail
DHCP relay address of the interface.interface
Slot/chassis number. The type is interface. The values are ethernet,port-channel, vlan, loopback.
intfname
Statistics related to DHCP.statistics
Cisco ACI Switch Command Reference, NX-OS Release 12.x 117
S Commandsshow ipv6 dhcp relay
show ipv6 icmp adjacencyshow ipv6 icmp adjacency [interface] [detail] [vrf {vrf-name | all}]
Syntax Description Show running system information.show
Display IPv6 information.ipv6
Display ICMPv6 information.icmp
Show IPv6 dynamic learnt adjacency entry.adjacency
Display detailed information.detail
Display per-VRF information.vrf
Display information for all VRFs.all
Interface name to display. The type is interface.interface
VRF name. The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x118
S Commandsshow ipv6 icmp adjacency
show ipv6 icmp interfaceshow ipv6 icmp interface [interface] [detail] [vrf {vrf-name | all}]
Syntax Description Display information for all VRFs.all
Show running system information.show
Show IPv6 dynamic learnt adjacency entry.interface
Display detailed information.detail
Display per-VRF information.vrf
Display IPv6 information.ipv6
Display ICMPv6 information.icmp
Interface name to display. The type is interface.interface
VRF name. The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x 119
S Commandsshow ipv6 icmp interface
show ipv6 interfaceshow ipv6 interface [ {brief [include-secondary]} | interface | ipv6-addr ] [ { vrf { all | vrf-name } } ]
Syntax Description Show running system information.show
Display IPv6 information.ipv6
Display IPv6 related interface information.interface
Show brief info of interface.brief
Display summary of all IPv6 addresses.include-secondary
Display only interfaces that are administratively enabled.operational
Display per-VRF information.vrf
Display all VRFs.all
Name of the Interface. The type is interface. The values are ethernet,port-channel, vlan, mgmt, loopback, vrf.
interface
Ipv6 Address. The type is ipv6.ipv6-addr
Name of the VRF. The type is string.vrf-name
Display interface for local IPv6 address. The type is string.local-addr
Cisco ACI Switch Command Reference, NX-OS Release 12.x120
S Commandsshow ipv6 interface
show ipv6 mld snoopingshow ipv6 mld snooping [ { vlan vlan } ]
Syntax Description Show running system information.show
Show IPv6 information.ipv6
Show MLD information.mld
MLD Snooping information.snooping
Display Vlan MLD snooping membership information.vlan
Specify vlan-id. The type is integer. The range is from 1 to 4095.vlan
Cisco ACI Switch Command Reference, NX-OS Release 12.x 121
S Commandsshow ipv6 mld snooping
show ipv6 mld snooping explicit-trackingshow ipv6 mld snooping explicit-tracking [ { vlan vlan } ] [encap]
Syntax Description Show running system information.show
Show IPv6 information.ipv6
Show MLD information.mld
MLD Snooping information.snooping
Display explicit-tracking database for MLDv2.explicit-tracking
Display Vlan explicit-tracking database.vlan
Display Encap Vlan explicit-tracking database.encap
Specify vlan-id. The type is integer. The range is from 1 to 4095.vlan
Cisco ACI Switch Command Reference, NX-OS Release 12.x122
S Commandsshow ipv6 mld snooping explicit-tracking
show ipv6 mld snooping groupsshow ipv6 mld snooping groups [ { [ group ] [ source ] } [ { vlan vlan } ] ] [ detail | summary] [ encap ]
Syntax Description Show running system information.show
Show IPv6 information.ipv6
Show MLD information.mld
Show MLD Snooping information.snooping
Display snooping information for group address.groups
Multicast IP address of single group to display. The type is ipv6.group
Source IP address. The type is ipv6.source
Display detailed information for the group.detail
Display snooping group summary.summary
Display Vlan MLD snooping membership information.vlan
Display Encap Vlan MLD snooping membership information.encap
Specify vlan-id. The type is integer. The range is from 1 to 4095.vlan
Cisco ACI Switch Command Reference, NX-OS Release 12.x 123
S Commandsshow ipv6 mld snooping groups
show ipv6 mld snooping lookup-modeshow ipv6 mld snooping lookup-mode [ { vlan vlan } ]
Syntax Description Show running system information.show
Show IPv6 information.ipv6
Show MLD information.mld
MLD Snooping information.snooping
MLD Snooping lkup mode information.lookup-mode
Display Vlan information.vlan
Specify vlan-id. The type is integer. The range is from 1 to 4095.vlan
Cisco ACI Switch Command Reference, NX-OS Release 12.x124
S Commandsshow ipv6 mld snooping lookup-mode
show ipv6 mld snooping mroutershow ipv6 mld snooping mrouter [ { vlan vlan } ] [detail] [encap]
Syntax Description Show running system information.show
Show IPv6 information.ipv6
Show MLD information.mld
MLD Snooping information.snooping
Display multicast routers detected.mrouter
Display detailed mrouter information.detail
Display Vlan multicast router information.vlan
Display Encap Vlan MLD snooping membership information.encap
Specify vlan-id. The type is integer. The range is from 1 to 4095.vlan
Cisco ACI Switch Command Reference, NX-OS Release 12.x 125
S Commandsshow ipv6 mld snooping mrouter
show ipv6 mld snooping queriershow ipv6 mld snooping querier [ { vlan vlan } ] [detail]
Syntax Description Show running system information.show
Show IPv6 information.ipv6
Show MLD information.mld
MLD Snooping information.snooping
Display snooping querier information.querier
Display detailed information.detail
Display Vlan MLD snooping querier information.vlan
Specify vlan-id. The type is integer. The range is from 1 to 4095.vlan
Cisco ACI Switch Command Reference, NX-OS Release 12.x126
S Commandsshow ipv6 mld snooping querier
show ipv6 mld snooping statisticsshow ipv6 mld snooping statistics [global | { vlan vlan } ]
Syntax Description Show running system information.show
Show IPv6 information.ipv6
Show MLD information.mld
MLD Snooping information.snooping
Display packet/error counter statistics.statistics
Display global statistics.global
Display vlan statistics.vlan
Specify vlan-id. The type is integer. The range is from 1 to 4095.vlan
Cisco ACI Switch Command Reference, NX-OS Release 12.x 127
S Commandsshow ipv6 mld snooping statistics
show ipv6 nd interfaceshow ipv6 nd interface [interface] [detail] [prefix] [vrf {vrf-name | all}]
Syntax Description Display information for all VRFs.all
Show running system information.show
Show IPv6 dynamic learnt adjacency entry.interface
Display detailed information.detail
Display List of ICMPv6 RA prefix.prefix
Display per-VRF information.vrf
Display IPv6 information.ipv6
Display NDinformation.nd
Interface name to display. The type is interface.interface
VRF name. The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x128
S Commandsshow ipv6 nd interface
show ipv6 prefix-listshow ipv6 prefix-list [ strarg ]
Syntax Description Show running system information.show
Display IPv6 information.ipv6
List IPv6 prefix lists.prefix-list
Name of prefix list (Max Size 100). The type is string.strarg
Cisco ACI Switch Command Reference, NX-OS Release 12.x 129
S Commandsshow ipv6 prefix-list
show ipv6 processshow ipv6 process [ { vrf { all | vrf-name } } ]
Syntax Description Show running system information.show
Display IP information.ipv6
Display IP global information.process
Display per-VRF information.vrf
Display all VRFs.all
Name of the VRF. The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x130
S Commandsshow ipv6 process
show ipv6 route + vrfshow ipv6 route [ ipv6-addr | { ipv6-prefix [{longer-prefixes|shorter-prefixes}] } ] [ bgp | eigrp | ospf ] [{ next-hop next-hop } | { interface interface } | { updated { [since stime ] [until utime] } } ]+ [ summary |detail ] vrf {vrf-name | all}
Syntax Description Show running system information.show
Display IP information.ipv6
Display routing information.route
Display single route longest match lookup. The type is ipv6.ipv6-addr
Display single exact match route. The type is ipv6_prefix.ipv6-prefix
Display matching routes with mask-lengths >= prefix.longer-prefixes
Display matching routes with mask-lengths <= prefix.shorter-prefixes
Display routes with this next-hop only.next-hop
Next hop address. The type is ipv6.next-hop
Display routes with this output interface only.interface
Interface Name. The type is interface.interface
Display routes filtered by last updated time.updated
Display those routes updated since this time.since
Since this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]. The type is string.stime
Display those routes updated until this time.until
Until this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]. The type is string.utime
Display route counts.summary
Display routes in full detail.detail
Display per-VRF information.vrf
VRF name. The type is string.vrf-name
bgp
ospf
Cisco ACI Switch Command Reference, NX-OS Release 12.x 131
S Commandsshow ipv6 route + vrf
eigrp
Display information for all VRFs.all
Cisco ACI Switch Command Reference, NX-OS Release 12.x132
S Commandsshow ipv6 route + vrf
show ipv6 static-routeshow ipv6 static-route [ { vrf { all | vrf-name } } ]
Syntax Description Show running system information.show
Display IP information.ipv6
Display configured static routes.static-route
Display per-VRF information.vrf
Display all VRFs.all
Name of the VRF. The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x 133
S Commandsshow ipv6 static-route
show isis adjacency vrfshow isis adjacency [{system-id sid}] [interface] [detail] vrf { all | vrf-name }
Syntax Description Show running system information.show
Display IS-IS status and configuration.isis
Display IS-IS adjacency information.adjacency
IS-IS interface. The type is interface. The values are ethernet.interface
Hostname or System ID.system-id
Hostname or System ID (in the form of XXXX.XXXX.XXXX). The type isstring.
sid
Display IS-IS detail adjacency information.detail
VRF name.vrf
Display information for all VRFs.all
Specify VRF Name. The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x134
S Commandsshow isis adjacency vrf
show isis database vrfshow isis database [level-1|l1] [lid] vrf { all | vrf-name }
Syntax Description Show running system information.show
Display IS-IS status and configuration.isis
Display IS-IS database information.database
Display IS-IS Level-1 routing link state database.level-1
Display IS-IS Level-1 routing link state database.l1
LSP ID in the form of XXXX.XXXX.XXXX.XX-XX. The type is lsp_id.lid
VRF name.vrf
Display information for all VRFs.all
Specify VRF Name. The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x 135
S Commandsshow isis database vrf
show isis dteps vrfshow isis dteps vrf { all | vrf-name }
Syntax Description Show running system information.show
Display IS-IS status and configuration.isis
ISIS Dynamic Tunnel EndPoint database.dteps
VRF name.vrf
Display information for all VRFs.all
Specify VRF Name. The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x136
S Commandsshow isis dteps vrf
show isis interface vrfshow isis interface [ brief | intf_arg ] [level-1] vrf { all | vrf-name }
Syntax Description Show running system information.show
Display IS-IS status and configuration.isis
Display IS-IS interface information.interface
Display Level-1 interfaces.level-1
Brief display of IS-IS interfaces.brief
IS-IS interface. The type is interface. The values are ethernet.intf_arg
VRF name.vrf
Display information for all VRFs.all
Specify VRF Name. The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x 137
S Commandsshow isis interface vrf
show isis protocol vrfshow isis protocol vrf { all | vrf-name }
Syntax Description Show running system information.show
Display IS-IS status and configuration.isis
Display IS-IS process information.protocol
VRF name.vrf
Display information for all VRFs.all
Specify VRF Name. The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x138
S Commandsshow isis protocol vrf
show isis route vrfshow isis route vrf { all | vrf-name }
Syntax Description Show running system information.show
Display IS-IS status and configuration.isis
Display IS-IS route information.route
VRF name.vrf
Display information for all VRFs.all
Specify VRF Name. The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x 139
S Commandsshow isis route vrf
show isis statistics vrfshow isis statistics vrf { all | vrf-name }
Syntax Description Show running system information.show
Display IS-IS status and configuration.isis
Display IS-IS protocol statistics.statistics
VRF name.vrf
Display information for all VRFs.all
Specify VRF Name. The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x140
S Commandsshow isis statistics vrf
show isis traffic vrfshow isis traffic [interface] vrf { all | vrf-name }
Syntax Description Show running system information.show
Display IS-IS status and configuration.isis
Display IS-IS traffic information.traffic
IS-IS interface. The type is interface. The values are ethernet.interface
VRF name.vrf
Display information for all VRFs.all
Specify VRF Name. The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x 141
S Commandsshow isis traffic vrf
show lacp countersshow lacp counters [ { interface arg0 } ]
Syntax Description Show running system information.show
LACP protocol.lacp
LACP counters.counters
Specify a port-channel.interface
Port Channel interface. The type is interface_mrange. The values areport-channel.
arg0
Cisco ACI Switch Command Reference, NX-OS Release 12.x142
S Commandsshow lacp counters
show lacp interfaceshow lacp interface arg0
Syntax Description Show running system information.show
LACP protocol.lacp
Specify an interface.interface
Interface. The type is interface. The values are ethernet.arg0
Cisco ACI Switch Command Reference, NX-OS Release 12.x 143
S Commandsshow lacp interface
show lacp neighborshow lacp neighbor [ { interface arg0 } ]
Syntax Description Show running system information.show
LACP protocol.lacp
LACP interface neighbor.neighbor
Specify a port-channel.interface
Port Channel interface. The type is interface_mrange. The values areport-channel.
arg0
Cisco ACI Switch Command Reference, NX-OS Release 12.x144
S Commandsshow lacp neighbor
show lacp port-channelshow lacp port-channel [ { interface arg0 } ]
Syntax Description Show running system information.show
LACP protocol.lacp
LACP port-channels.port-channel
Specify a port-channel.interface
Port Channel interface. The type is interface_mrange. The values areport-channel.
arg0
Cisco ACI Switch Command Reference, NX-OS Release 12.x 145
S Commandsshow lacp port-channel
show lacp system-identifiershow lacp system-identifier
Syntax Description Show running system information.show
LACP protocol.lacp
Show system-identifier information.system-identifier
Cisco ACI Switch Command Reference, NX-OS Release 12.x146
S Commandsshow lacp system-identifier
show lldp dcbx interfaceshow lldp dcbx interface if0
Syntax Description Show running system information.show
Show information about lldp.lldp
Show dcbx information.dcbx
show lldp interface information.interface
The type is interface. Enter interface. The values are ethernet.if0
Cisco ACI Switch Command Reference, NX-OS Release 12.x 147
S Commandsshow lldp dcbx interface
show lldp entryshow lldp entry [ sys-name ]
Syntax Description Show running system information.show
Show information about lldp.lldp
Show lldp entry information.entry
Peer's System name. The type is string.sys-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x148
S Commandsshow lldp entry
show lldp interfaceshow lldp interface arg0
Syntax Description Show running system information.show
Show information about lldp.lldp
Show lldp interface information.interface
Interface. The type is interface. The values are ethernet, mgmt.arg0
Cisco ACI Switch Command Reference, NX-OS Release 12.x 149
S Commandsshow lldp interface
show lldp neighborsshow lldp neighbors [ { interface arg0 } ] [ detail ]
Syntax Description Show running system information.show
Show information about lldp.lldp
Show lldp neighbor information.neighbors
Show lldp neighbor information on an interface.interface
Interface. The type is interface. The values are ethernet, mgmt.arg0
Show lldp neighbor detail information.detail
Cisco ACI Switch Command Reference, NX-OS Release 12.x150
S Commandsshow lldp neighbors
show lldp timersshow lldp timers
Syntax Description Show running system information.show
Show information about lldp.lldp
Show lldp timers.timers
Cisco ACI Switch Command Reference, NX-OS Release 12.x 151
S Commandsshow lldp timers
show lldp tlv-selectshow lldp tlv-select
Syntax Description Show running system information.show
Show information about lldp.lldp
Show lldp tlv-select.tlv-select
Cisco ACI Switch Command Reference, NX-OS Release 12.x152
S Commandsshow lldp tlv-select
show lldp trafficshow lldp traffic [ { interface arg0 } ]
Syntax Description Show running system information.show
Show information about lldp.lldp
Show lldp counters.traffic
Show lldp interface information.interface
Interface. The type is interface. The values are ethernet, mgmt.arg0
Cisco ACI Switch Command Reference, NX-OS Release 12.x 153
S Commandsshow lldp traffic
show locator-led statusshow locator-led status
Syntax Description Show running system information.show
Blink locator led on device.locator-led
Status.status
Cisco ACI Switch Command Reference, NX-OS Release 12.x154
S Commandsshow locator-led status
show logging ip access-list cacheshow logging ip access-list cache { permit | deny }
Syntax Description Show running system information.show
logging information.logging
IP configuration.ip
Access-list.access-list
show entries in ACLLOG cache.cache
action is permit.permit
action is deny.deny
Cisco ACI Switch Command Reference, NX-OS Release 12.x 155
S Commandsshow logging ip access-list cache
show logging ip access-list drop-codesshow logging ip access-list drop-codes
Syntax Description Show running system information.show
logging information.logging
IP configuration.ip
Access-list.access-list
Drop Codes.drop-codes
Cisco ACI Switch Command Reference, NX-OS Release 12.x156
S Commandsshow logging ip access-list drop-codes
show logging ip access-list spanshow logging ip access-list span
Syntax Description Show running system information.show
logging information.logging
IP configuration.ip
Access-list.access-list
show entries in ACLLOG span.span
Cisco ACI Switch Command Reference, NX-OS Release 12.x 157
S Commandsshow logging ip access-list span
show mac address-table +showmac address-table [ { static | dynamic } ] [ {addressmac-addr} | {vlan id} | {interface interface-name}]+
Syntax Description Show running system information.show
Mac addr information.mac
MAC Address Table.address-table
Display Static Entries.static
Display Dynamic Entries.dynamic
address.address1
VLAN.vlan1
address.address
Interface.interface
VLAN.vlan
MAC Address. The type is ethernet.mac-addr
VLAN ID. The type is integer. The range is from 1 to 4095.id
Interface name. The type is interface.interface-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x158
S Commandsshow mac address-table +
show moduleshow module [arg0]
Syntax Description Show Information.show
Module.module
please enter the module number. The type is integer. The range is from 1 to30.
arg0
Cisco ACI Switch Command Reference, NX-OS Release 12.x 159
S Commandsshow module
show module fexshow module fex {all | fexid}
Syntax Description Show running system information.show
Show module information.module
Show fex module information.fex
FEX number. The type is integer. The range is from 101 to 164.fexid
Show information for all FEX.all
Cisco ACI Switch Command Reference, NX-OS Release 12.x160
S Commandsshow module fex
show npv external-interface-usageshow npv external-interface-usage [ { server-interface arg0 } ]
Syntax Description Show running system information.show
Show Npv information.npv
Show external interface usage by server interfaces.external-interface-usage
Show external interface usage by a server interface.server-interface
Interface. The type is interface. The values are vfc, vfc-port-channel.arg0
Cisco ACI Switch Command Reference, NX-OS Release 12.x 161
S Commandsshow npv external-interface-usage
show npv flogi-tableshow npv flogi-table [ { vsan vsan-id } ]
Syntax Description Show running system information.show
Show Npv information.npv
Show information about FLOGI sessions.flogi-table
Show information about FLOGI sessions for a VSAN.vsan
Vsan-id. The type is integer_range. The range is from 1 to 4093.vsan-id
Cisco ACI Switch Command Reference, NX-OS Release 12.x162
S Commandsshow npv flogi-table
show npv flogi-table interfaceshow npv flogi-table interface arg0
Syntax Description Show running system information.show
Show Npv information.npv
Show information about FLOGI sessions.flogi-table
Show information about FLOGI sessions for a server interface.interface
Interface. The type is interface. The values are vfc, vfc-port-channel.arg0
Cisco ACI Switch Command Reference, NX-OS Release 12.x 163
S Commandsshow npv flogi-table interface
show npv statusshow npv status [ { vsan vsan-id } ]
Syntax Description Show running system information.show
Show Npv information.npv
Show Npv Status.status
Show NPV status for a specific VSAN.vsan
Vsan-id. The type is integer_range. The range is from 1 to 4093.vsan-id
Cisco ACI Switch Command Reference, NX-OS Release 12.x164
S Commandsshow npv status
show npv traffic-mapshow npv traffic-map [ { server-interface arg0 } ]
Syntax Description Show running system information.show
Show Npv information.npv
Show information about Traffic Map.traffic-map
Show information about Traffic map for a server interface.server-interface
Interface. The type is interface. The values are vfc, vfc-port-channel.arg0
Cisco ACI Switch Command Reference, NX-OS Release 12.x 165
S Commandsshow npv traffic-map
show ntp authentication-keysshow ntp authentication-keys
Syntax Description Show running system information.show
Show NTP information.ntp
Display authentication keys.authentication-keys
Cisco ACI Switch Command Reference, NX-OS Release 12.x166
S Commandsshow ntp authentication-keys
show ntp authentication-statusshow ntp authentication-status
Syntax Description Show running system information.show
Show NTP information.ntp
NTP Authentication Status.authentication-status
Cisco ACI Switch Command Reference, NX-OS Release 12.x 167
S Commandsshow ntp authentication-status
show ntp peer-statusshow ntp peer-status
Syntax Description Show running system information.show
Show NTP information.ntp
Show the status for all the server/peers.peer-status
Cisco ACI Switch Command Reference, NX-OS Release 12.x168
S Commandsshow ntp peer-status
show ntp peersshow ntp peers
Syntax Description Show running system information.show
Show NTP information.ntp
Show all the peers..peers
Cisco ACI Switch Command Reference, NX-OS Release 12.x 169
S Commandsshow ntp peers
show ntp statistics peer ipaddrshow ntp statistics peer ipaddr arg0
Syntax Description Show running system information.show
Show NTP information.ntp
Show the NTP statistics.statistics
Show the per-peer statistics counter of a peer..peer
Peer's IP address.ipaddr
The type is string. A.B.C.D.arg0
Cisco ACI Switch Command Reference, NX-OS Release 12.x170
S Commandsshow ntp statistics peer ipaddr
show ntp trusted-keysshow ntp trusted-keys
Syntax Description Show running system information.show
Show NTP information.ntp
Display trusted keys.trusted-keys
Cisco ACI Switch Command Reference, NX-OS Release 12.x 171
S Commandsshow ntp trusted-keys
show ospfv3 databaseshow ospfv3 [{vrf {vrf-name | all}}] database [[[[router | network | intra-area-prefix | {inter-area {irouter| iprefix}} | nssa-external | area-unknown | [[{link | link-unknown | grace} [interface]]]][{area area-id-ip}]]| {external [{tag tag_val}]} | as-unknown] [lsid] [self-originated | {adv-router advid} | {adv-router-nameadv-name} ]] [{vrf {vrf-name | all}}]
Syntax Description Show running system information.show
Display OSPFv3 status and configuration.ospfv3
Link-state Database Summary.database
Display router LSAs.router
Display network LSAs.network
Display Intra-Area-Prefix LSAs.intra-area-prefix
Display inter-area LSAs.inter-area
Display Inter-Area-Router LSAs.irouter
Display Inter-Area-Prefix LSAs.iprefix
Display type 7 (NSSA external) LSAs.nssa-external
Display area-scope unknown LSAs.area-unknown
Display Link LSAs.link
Display link-scope unknown LSAs.link-unknown
Display Grace LSAs.grace
The type is interface. Display only LSA's on this Interface.interface
Display only LSA's in this area.area
The type is ipaddr. Area Id as an integer or ip address.area-id-ip
Display type 5 (external) LSAs.external
Restrict display by tag.tag
The type is uinteger. 32-bit tag value.tag_val
Display as-scope unknown LSAs.as-unknown
The type is ipaddr. Restrict display by link state ID.lsid
Cisco ACI Switch Command Reference, NX-OS Release 12.x172
S Commandsshow ospfv3 database
Display only self-originated LSAs.self-originated
Restrict display by Advertising router.adv-router
The type is ipaddr. Advertising router ID.advid
Restrict display by Advertising router name.adv-router-name
The type is string. DNS Name of the Advertising router.adv-name
Display per-VRF information.vrf
The type is string. VRF name.vrf-name
Display information for all VRFs.all
Cisco ACI Switch Command Reference, NX-OS Release 12.x 173
S Commandsshow ospfv3 database
show ospfv3 database detailshow ospfv3 [{vrf {vrf-name | all}}] database [[[[router | network | intra-area-prefix | {inter-area {irouter| iprefix}} | nssa-external | area-unknown | [[{link | link-unknown | grace} [interface]]]][{area area-id-ip}]]| {external [{tag tag_val}]} | as-unknown] [lsid] [self-originated | {adv-router advid} | {adv-router-nameadv-name} ]] detail [{vrf {vrf-name | all}}]
Syntax Description Show running system information.show
Display OSPFv3 status and configuration.ospfv3
Link-state Database Summary.database
Display router LSAs.router
Display network LSAs.network
Display Intra-Area-Prefix LSAs.intra-area-prefix
Display inter-area LSAs.inter-area
Display Inter-Area-Router LSAs.irouter
Display Inter-Area-Prefix LSAs.iprefix
Display type 7 (NSSA external) LSAs.nssa-external
Display area-scope unknown LSAs.area-unknown
Display Link LSAs.link
Display link-scope unknown LSAs.link-unknown
Display Grace LSAs.grace
The type is interface. Display only LSA's on this Interface.interface
Display only LSA's in this area.area
The type is ipaddr. Area Id as an integer or ip address.area-id-ip
Display type 5 (external) LSAs.external
Restrict display by tag.tag
The type is uinteger. 32-bit tag value.tag_val
Display as-scope unknown LSAs.as-unknown
The type is ipaddr. Restrict display by link state ID.lsid
Cisco ACI Switch Command Reference, NX-OS Release 12.x174
S Commandsshow ospfv3 database detail
Display only self-originated LSAs.self-originated
Restrict display by Advertising router.adv-router
The type is ipaddr. Advertising router ID.advid
Restrict display by Advertising router name.adv-router-name
The type is string. DNS Name of the Advertising router.adv-name
Display LSA in detail.detail
Display per-VRF information.vrf
The type is string. VRF name.vrf-name
Display information for all VRFs.all
Cisco ACI Switch Command Reference, NX-OS Release 12.x 175
S Commandsshow ospfv3 database detail
show ospfv3 interfaceshow [ipv6] ospfv3 interface { arg0 | { [ brief ] vrf { all | vrf-name } } }
Syntax Description Show running system information.show
Display IPv6 information.ipv6
Display OSPFv3 status and configuration.ospfv3
OSPFv3 enabled interface.interface
Interface. The type is interface. The values are ethernet, port-channel, vlan,loopback.
arg0
Display summary of OSPFv3 interfaces.brief
Display per-VRF information.vrf
Display information for all VRFs.all
VRF name (Max Size 32). The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x176
S Commandsshow ospfv3 interface
show ospfv3 neighborsshow [ipv6] ospfv3 neighbors arg0 [ { ip [ detail ] } | detail | summary ] [vrf { all | vrf-name } ]
Syntax Description Show running system information.show
Display IPv6 information.ipv6
Display OSPFv3 status and configuration.ospfv3
Neighbor list.neighbors
Router ID of neighbor. The type is ipaddr.ip
Show detailed neighbor display.detail
Interface. The type is interface. The values are ethernet, port-channel, vlan,loopback.
arg0
Summary of neighbors.summary
Display per-VRF information.vrf
Display information for all VRFs.all
VRF name (Max Size 32). The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x 177
S Commandsshow ospfv3 neighbors
show ospfv3 neighbors vrfshow [ipv6] ospfv3 neighbors [ { ip [ detail ] } | detail | summary ] vrf { all | vrf-name }
Syntax Description Show running system information.show
Display IPv6 information.ipv6
Display OSPFv3 status and configuration.ospfv3
Neighbor list.neighbors
Router ID of neighbor. The type is ipaddr.ip
Show detailed neighbor display.detail
Summary of neighbors.summary
Display per-VRF information.vrf
Display information for all VRFs.all
VRF name (Max Size 32). The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x178
S Commandsshow ospfv3 neighbors vrf
show ospfv3 route vrfshow [ipv6] ospfv3 route [ summary | { ipv6-prefix [ longer-prefixes ] [ summary ] } | ipv6-addr ] vrf {all | vrf-name }
Syntax Description Show running system information.show
Display IPv6 information.ipv6
Display OSPFv3 status and configuration.ospfv3
Internal OSPFv3 routes.route
Show single OSPFv3 route. The type is ipv6.ipv6-addr
Show single exact match OSPFv3 route. The type is ipv6_prefix.ipv6-prefix
Show route counts.summary
Show exact match and more specific routes.longer-prefixes
Display per-VRF information.vrf
Display information for all VRFs.all
VRF name (Max Size 32). The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x 179
S Commandsshow ospfv3 route vrf
show ospfv3 summary-address vrfshow [ipv6] ospfv3 summary-address vrf { all | vrf-name }
Syntax Description Show running system information.show
Display IPv6 information.ipv6
Display OSPFv3 status and configuration.ospfv3
Summary-address redistribution information.summary-address
Display per-VRF information.vrf
Display information for all VRFs.all
VRF name (Max Size 32). The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x180
S Commandsshow ospfv3 summary-address vrf
show ospfv3 trafficshow [ipv6] ospfv3 traffic { arg0 | { vrf { all | vrf-name } } }
Syntax Description Show running system information.show
Display IPv6 information.ipv6
Display OSPFv3 status and configuration.ospfv3
Packet counters.traffic
Interface. The type is interface. The values are ethernet, port-channel, vlan,loopback.
arg0
Display per-VRF information.vrf
Display information for all VRFs.all
VRF name (Max Size 32). The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x 181
S Commandsshow ospfv3 traffic
show ospfv3 vrfshow [ipv6] ospfv3 vrf { all | vrf-name }
Syntax Description Show running system information.show
Display IPv6 information.ipv6
Display OSPFv3 status and configuration.ospfv3
Display per-VRF information.vrf
Display information for all VRFs.all
VRF name (Max Size 32). The type is string.vrf-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x182
S Commandsshow ospfv3 vrf
show port-channel capacityshow port-channel capacity
Syntax Description Show running system information.show
Show port-channel information.port-channel
Capacity information.capacity
Cisco ACI Switch Command Reference, NX-OS Release 12.x 183
S Commandsshow port-channel capacity
show port-channel databaseshow port-channel database [ { interface if0 } ]
Syntax Description Show running system information.show
Show port-channel information.port-channel
Show port-channel database.database
Specify a port-channel.interface
. The type is interface_mrange. The values are port-channel.if0
Cisco ACI Switch Command Reference, NX-OS Release 12.x184
S Commandsshow port-channel database
show port-channel extendedshow port-channel extended [ { interface if0 } ]
Syntax Description Show running system information.show
Show port-channel information.port-channel
Show port-channel extended.extended
Specify a port-channel.interface
. The type is interface. The values are port-channel.if0
Cisco ACI Switch Command Reference, NX-OS Release 12.x 185
S Commandsshow port-channel extended
show port-channel summaryshow port-channel summary [ { interface if0 } ]
Syntax Description Show running system information.show
Show port-channel information.port-channel
Show port-channel summary.summary
Specify a port-channel.interface
. The type is interface. The values are port-channel.if0
Cisco ACI Switch Command Reference, NX-OS Release 12.x186
S Commandsshow port-channel summary
show port-channel trafficshow port-channel traffic [ { interface if0 } ]
Syntax Description Show running system information.show
Show port-channel information.port-channel
Show port-channel traffic statistics.traffic
Specify a port-channel.interface
. The type is interface. The values are port-channel.if0
Cisco ACI Switch Command Reference, NX-OS Release 12.x 187
S Commandsshow port-channel traffic
show port-channel usageshow port-channel usage
Syntax Description Show running system information.show
Show port-channel information.port-channel
Show port-channel number usage.usage
Cisco ACI Switch Command Reference, NX-OS Release 12.x188
S Commandsshow port-channel usage
show porttrackshow porttrack
Syntax Description Show running system information.show
Port Tracking.porttrack
Cisco ACI Switch Command Reference, NX-OS Release 12.x 189
S Commandsshow porttrack
show processesshow processes
Syntax Description Show running system information.show
Show processes.processes
Cisco ACI Switch Command Reference, NX-OS Release 12.x190
S Commandsshow processes
show processes cpushow processes cpu
Syntax Description Show running system information.show
Show processes.processes
Show processes CPU Info.cpu
Cisco ACI Switch Command Reference, NX-OS Release 12.x 191
S Commandsshow processes cpu
show processes cpu sortshow processes cpu sort
Syntax Description Show running system information.show
Show processes.processes
Show processes CPU Info.cpu
Show processes CPU Info (Sorted by Cpu Util).sort
Cisco ACI Switch Command Reference, NX-OS Release 12.x192
S Commandsshow processes cpu sort
show processes memoryshow processes memory
Syntax Description Show running system information.show
Show processes.processes
Show processes Memory Info.memory
Cisco ACI Switch Command Reference, NX-OS Release 12.x 193
S Commandsshow processes memory
show radius-servershow radius-server [sorted | {groups [grp-name]}]
Syntax Description Show Information.show
Radius-server.radius-server
Sorted server list.sorted
Radius server groups.groups
Group Name. The type is string.grp-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x194
S Commandsshow radius-server
show redundancy statusshow redundancy status
Syntax Description Show running system information.show
Show system redundancy status.redundancy
Current redundancy status.status
Cisco ACI Switch Command Reference, NX-OS Release 12.x 195
S Commandsshow redundancy status
show route-mapshow route-map [ strarg ]
Syntax Description Show running system information.show
Route-map information.route-map
Route-map name (Max Size 100). The type is string.strarg
Cisco ACI Switch Command Reference, NX-OS Release 12.x196
S Commandsshow route-map
show san-port-channel databaseshow san-port-channel database
Syntax Description Show running system information.show
Show san-port-channel information.san-port-channel
Show san-port-channel database.database
Cisco ACI Switch Command Reference, NX-OS Release 12.x 197
S Commandsshow san-port-channel database
show san-port-channel summaryshow san-port-channel summary
Syntax Description Show running system information.show
Show san-port-channel information.san-port-channel
Show san-port-channel summary.summary
Cisco ACI Switch Command Reference, NX-OS Release 12.x198
S Commandsshow san-port-channel summary
show san-port-channel usageshow san-port-channel usage
Syntax Description Show running system information.show
Show san-port-channel information.san-port-channel
Show san-port-channel usage.usage
Cisco ACI Switch Command Reference, NX-OS Release 12.x 199
S Commandsshow san-port-channel usage
show service copy infoshow service copy info [ { group [ gid ] } | { destination [ { ip dip | dipv6 } { vnid dvnid | dvnidhex } ] } ]
Syntax Description Show running system information.show
Display service information.service
Display service copy information.copy
Display service copy information.info
Display group information.group
Display destination information.destination
ip address of destination.ip
ipv6 address of destination.ipv6
vnid address of destination.vnid
group number. The type is integer. The range is from 0 to 65535.gid
The type is ipaddr. IP address.dip
The type is ipv6. IPv6 address.dipv6
vnid number. The type is integer.dvnid
vnid number. The type is hex.dvnidhex
Cisco ACI Switch Command Reference, NX-OS Release 12.x200
S Commandsshow service copy info
show service redir infoshow service redir info [ { group [ gid ] } | { destination [ { ip dip | dipv6 } { vnid dvnid | dvnidhex } ] } ]
Syntax Description Show running system information.show
Display service information.service
Display service redirect information.redir
Display service redirect information.info
Display group information.group
Display destination information.destination
ip address of destination.ip
vnid address of destination.vnid
group number. The type is integer. The range is from 0 to 65535.gid
The type is ipaddr. IP address.dip
The type is ipv6. IPv6 address.dipv6
vnid number. The type is hex.dvnidhex
vnid number. The type is integer.dvnid
Cisco ACI Switch Command Reference, NX-OS Release 12.x 201
S Commandsshow service redir info
show snmpshow snmp
Syntax Description Show running system information.show
Display SNMP information.snmp
Cisco ACI Switch Command Reference, NX-OS Release 12.x202
S Commandsshow snmp
show snmp communityshow snmp community
Syntax Description Show running system information.show
Display SNMP information.snmp
Display SNMP Community information.community
Cisco ACI Switch Command Reference, NX-OS Release 12.x 203
S Commandsshow snmp community
show snmp contextshow snmp context
Syntax Description Show running system information.show
Display SNMP information.snmp
Display SNMP Context information.context
Cisco ACI Switch Command Reference, NX-OS Release 12.x204
S Commandsshow snmp context
show snmp engineIDshow snmp engineID
Syntax Description Show running system information.show
Display SNMP information.snmp
Show snmp engineID.engineID
Cisco ACI Switch Command Reference, NX-OS Release 12.x 205
S Commandsshow snmp engineID
show snmp hostshow snmp host
Syntax Description Show commands.show
Show snmp internal information.snmp
show snmp hosts.host
Cisco ACI Switch Command Reference, NX-OS Release 12.x206
S Commandsshow snmp host
show snmp summaryshow snmp summary
Syntax Description Show running system information.show
Display SNMP information.snmp
Display SNMP Summary.summary
Cisco ACI Switch Command Reference, NX-OS Release 12.x 207
S Commandsshow snmp summary
show snmp usershow snmp user
Syntax Description Show running system information.show
Display SNMP information.snmp
Display SNMP User information.user
Cisco ACI Switch Command Reference, NX-OS Release 12.x208
S Commandsshow snmp user
show spromshow sprom { backplane | { module arg1 } | { fan arg0 } | { powersupply arg2 } | sup | stby-sup | all }
Syntax Description Show running system information.show
show SPROM contents.sprom
show all sproms contents.all
show powersupply sprom contents.powersupply
show linecard module sprom contents.module
show fan module sprom contents.fan
show stanby supervisor sprom contents.stby-sup
show supervisor sprom contents.sup
show backplane clock module sprom contents.backplane
please enter the fan number. The type is integer. The range is from 1 to 15.arg0
please enter the module number. The type is integer. The range is from 1 to30.
arg1
please enter the powersupply number. The type is integer. The range is from1 to 10.
arg2
Cisco ACI Switch Command Reference, NX-OS Release 12.x 209
S Commandsshow sprom
show switchnameshow switchname
Syntax Description Show running system information.show
Show the system's hostname.switchname
Cisco ACI Switch Command Reference, NX-OS Release 12.x210
S Commandsshow switchname
show system error-idshow system error-id { list | i0 }
Syntax Description Show running system information.show
System-related show commands.system
Show description about errors.error-id
Show description about all error IDs.list
The type is hex. Show description about specific error. The range is from 0x0 to0xffffffff.
i0
Cisco ACI Switch Command Reference, NX-OS Release 12.x 211
S Commandsshow system error-id
show system redundancy statusshow system redundancy [ ha ] status
Syntax Description Show running system information.show
System-related show commands.system
Show system redundancy status.redundancy
Current redundancy status.status
Vdc redundancy status.ha
Cisco ACI Switch Command Reference, NX-OS Release 12.x212
S Commandsshow system redundancy status
show system reset-reasonshow system reset-reason [ { module arg0 } ]
Syntax Description Show running system information.show
System-related show commands.system
Show last reset reason.reset-reason
Module.module
please enter the module number. The type is integer. The range is from 1to 30.
arg0
Cisco ACI Switch Command Reference, NX-OS Release 12.x 213
S Commandsshow system reset-reason
show system reset-reason fexshow system reset-reason fex fexid
Syntax Description Show running system information.show
System-related show commands.system
Show last reset reason.reset-reason
Show fex last reset reason.fex
FEX number. The type is integer. The range is from 101 to 164.fexid
Cisco ACI Switch Command Reference, NX-OS Release 12.x214
S Commandsshow system reset-reason fex
show system resourcesshow system resources
Syntax Description Show running system information.show
System-related show commands.system
Show system resources.resources
Cisco ACI Switch Command Reference, NX-OS Release 12.x 215
S Commandsshow system resources
show system uptimeshow system uptime
Syntax Description Show running system information.show
System information.system
How long the system has been up.uptime
Cisco ACI Switch Command Reference, NX-OS Release 12.x216
S Commandsshow system uptime
show tacacs-servershow tacacs-server [sorted | {groups [grp-name]}]
Syntax Description Show Information.show
Tacacs-server.tacacs-server
Sorted server list.sorted
Tacacs server groups.groups
Group Name. The type is string.grp-name
Cisco ACI Switch Command Reference, NX-OS Release 12.x 217
S Commandsshow tacacs-server
show usersshow users
Syntax Description Show running system information.show
Show users logged onto the system and their sessions.users
Cisco ACI Switch Command Reference, NX-OS Release 12.x218
S Commandsshow users
show versionshow version
Syntax Description Show running system information.show
Show running firmware version and basic system information.version
Cisco ACI Switch Command Reference, NX-OS Release 12.x 219
S Commandsshow version
show version moduleshow version module [arg0]
Syntax Description Show running system information.show
Show the software version.version
Module.module
please enter the module number. The type is integer. The range is from 1 to30.
arg0
Cisco ACI Switch Command Reference, NX-OS Release 12.x220
S Commandsshow version module
show vlanshow vlan [extended]
Syntax Description Show running system information.show
VLAN status.vlan
VLAN extended info like encaps.extended
Cisco ACI Switch Command Reference, NX-OS Release 12.x 221
S Commandsshow vlan
show vlan all-portsshow vlan all-ports
Syntax Description Show running system information.show
VLAN status.vlan
Show all ports on VLAN.all-ports
Cisco ACI Switch Command Reference, NX-OS Release 12.x222
S Commandsshow vlan all-ports
show vlan briefshow vlan brief
Syntax Description Show running system information.show
VLAN status.vlan
All VLAN status in brief.brief
Cisco ACI Switch Command Reference, NX-OS Release 12.x 223
S Commandsshow vlan brief
show vlan fcoeshow vlan fcoe [ vlan-id ]
Syntax Description Show running system information.show
VLAN status.vlan
FCOE Configuration.fcoe
VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19. The type is integer_mrange.The range is from 1 to 4095.
vlan-id
Cisco ACI Switch Command Reference, NX-OS Release 12.x224
S Commandsshow vlan fcoe
show vlan idshow vlan id vlan-id [extended]
Syntax Description Show running system information.show
VLAN status.vlan
VLAN status by VLAN id.id
VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19. The type is integer_mrange.The range is from 1 to 4095.
vlan-id
VLAN extended info like encaps.extended
Cisco ACI Switch Command Reference, NX-OS Release 12.x 225
S Commandsshow vlan id
show vlan reservedshow vlan reserved [extended]
Syntax Description Show running system information.show
VLAN status.vlan
reserved
VLAN extended info like encaps.extended
Cisco ACI Switch Command Reference, NX-OS Release 12.x226
S Commandsshow vlan reserved
show vlan summaryshow vlan summary
Syntax Description Show running system information.show
VLAN status.vlan
VLAN summary information.summary
Cisco ACI Switch Command Reference, NX-OS Release 12.x 227
S Commandsshow vlan summary
show vpcshow vpc [ { vpc-number | { brief [ { vpc vpc-number } ] } | { extended [ { vpc vpc-number } ] } } ]
Syntax Description Show running system information.show
Virtual Port Channel configuration.vpc
Brief display of vPC status.brief
Extended display of vPC status.extended
Enter a Virtual Port Channel number. The type is integer. to 4096. The rangeis from 1
vpc-number
Cisco ACI Switch Command Reference, NX-OS Release 12.x228
S Commandsshow vpc
show vpc consistency-parametersshow vpc consistency-parameters { global | { interface if } | { vpc vpc-num } }
Syntax Description Show running system information.show
Virtual Port Channel configuration.vpc
Show vPC Consistency Parameters.consistency-parameters
Global Parameters.global
Specify interface.interface
. The type is interface. The values are port-channel.if
Enter a Virtual Port Channel number. The type is integer. to 4096. Therange is from 1
vpc-num
Cisco ACI Switch Command Reference, NX-OS Release 12.x 229
S Commandsshow vpc consistency-parameters
show vpc peer-keepaliveshow vpc peer-keepalive
Syntax Description Show running system information.show
Virtual Port Channel configuration.vpc
vPC keepalive status.peer-keepalive
Cisco ACI Switch Command Reference, NX-OS Release 12.x230
S Commandsshow vpc peer-keepalive
show vpc roleshow vpc role
Syntax Description Show running system information.show
Virtual Port Channel configuration.vpc
vPC role status.role
Cisco ACI Switch Command Reference, NX-OS Release 12.x 231
S Commandsshow vpc role
show vpc statistics peer-keepaliveshow vpc statistics peer-keepalive
Syntax Description Show running system information.show
Virtual Port Channel configuration.vpc
Statistics.statistics
peer keepalive module related statistics.peer-keepalive
Cisco ACI Switch Command Reference, NX-OS Release 12.x232
S Commandsshow vpc statistics peer-keepalive
show vpc statistics vpcshow vpc statistics vpc vpc_num
Syntax Description Show running system information.show
Virtual Port Channel configuration.vpc
Statistics.statistics
Enter a Virtual Port Channel number. The type is integer. to 4096. The rangeis from 1
vpc_num
Cisco ACI Switch Command Reference, NX-OS Release 12.x 233
S Commandsshow vpc statistics vpc
show vrfshow vrf [vrf-name | all] [detail [extended]] [{order id}]
Syntax Description Show running system information.show
Display VRF information.vrf
VRF name. The type is vrf_name.vrf-name
Display VRF information for all VRFs.all
Specify ordering.order
Order by ID.id
Display VRF detail information.detail
Display extended VRF information.extended
Cisco ACI Switch Command Reference, NX-OS Release 12.x234
S Commandsshow vrf
show vrf interfaceshow vrf [vrf-name | all ] interface [interface]
Syntax Description Show running system information.show
Display VRF information.vrf
VRF name. The type is vrf_name.vrf-name
Display VRF information for all VRFs.all
Display interface VRF information.interface
Display interface VRF information. The type is interface.interface
Cisco ACI Switch Command Reference, NX-OS Release 12.x 235
S Commandsshow vrf interface
show vsanshow vsan [ vsan-id ]
Syntax Description Show running system information.show
Show vsan information.vsan
VSAN is range <1-4078>. The type is integer_range. The range is from 1 to4078.
vsan-id
Cisco ACI Switch Command Reference, NX-OS Release 12.x236
S Commandsshow vsan
show vsan membershipshow vsan [ vsan-id ] membership
Syntax Description Show running system information.show
Show vsan information.vsan
Show membership information.membership
VSAN is range <1-4078>. The type is integer_range. The range is from 1to 4078.
vsan-id
Cisco ACI Switch Command Reference, NX-OS Release 12.x 237
S Commandsshow vsan membership
show vsan membership interfaceshow vsan membership interface { arg0 }
Syntax Description Show running system information.show
Show vsan information.vsan
Show membership information.membership
Show membership information for interface(s).interface
Interface. The type is interface. The values are vfc, vfc-port-channel.arg0
Cisco ACI Switch Command Reference, NX-OS Release 12.x238
S Commandsshow vsan membership interface
show vsan usageshow vsan usage
Syntax Description Show running system information.show
Show vsan information.vsan
Show vsan usage in the system.usage
Cisco ACI Switch Command Reference, NX-OS Release 12.x 239
S Commandsshow vsan usage
show zoning-filtershow zoning-filter [ { filter id } ]
Syntax Description Show running system information.show
Display Zoning-Filter information.zoning-filter
Display Zoning-Filter information using this Filter.filter
Filter ID/string. The type is string.id
Cisco ACI Switch Command Reference, NX-OS Release 12.x240
S Commandsshow zoning-filter
show zoning-rule +show zoning-rule [ { src-epg epg0 } | { dst-epg epg1 } | { scope scopeId } | { filter filt } ]+
Syntax Description Show running system information.show
Display Zoning-Rule information.zoning-rule
Display Source EPG information.src-epg
Source EPG number. The type is integer. The range is from 0 to 65535.epg0
Display Destination EPG information.dst-epg
Destination EPG number. The type is integer. The range is from 0 to 65535.epg1
Display Rules for this Scope.scope
Scope ID. The type is integer. The range is from 1 to 16777215.scopeId
Display Rules using this Filter.filter
Filter ID/string. The type is string.filt
Cisco ACI Switch Command Reference, NX-OS Release 12.x 241
S Commandsshow zoning-rule +
Cisco ACI Switch Command Reference, NX-OS Release 12.x242
S Commandsshow zoning-rule +