Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Page: 627
X
X
TB 1/0/1900
000000 000
000 00
Received Stamp Area:
North Stonington School Modernization 297/298/311 Norwich-Westerly RoadNorth Stonington, CT 06359
Banton Construction Company
04/07/18
INTRUSION DETECTIONPRODUCT DATA
Submitted as Substitution (As equal):
Elementary School:High School/Middle School:
Board of Education:
Architect's Stamp Area: Engineer's Stamp Area (As Required):
Construction Manager's Stamp Area:
Date:
Subcontractor/ Vendor:
Submittal Description:
Spec. Section: 281600-001-001-A
DCC Job #: 25-01-0345
Comments:
Downes Construction Company, LLCP.O. Box 727
Attn: Travis Burton
Architect: QA&M Architecture
New Britain, CT 06050200 Stanley Street
Provide submittal for EACH SCHOOL
MEP Engineer: RZ Design Associates, Inc.Structural Engineer: Perrone & Zajda Engineers, LLCCivil Engineer: CLA Engineers, Inc.Landscape Architect: TO Design, LLCFood Service Consultant: Crabtree McGrath Associates, Inc.
First Submission:Resubmission #:
Submitted as Specified:
Paragraph:
TB 1/0/1900
000000 000
000 0000
X
4/11/2018
281600 001
X
04/23/18 LCP
RZ REVIEW COMMENTS:1. COORDINATE MOUNTING LOCATIONS
OF ALL DEVICES, POWER SUPPLIES, WITH THE ARCHITECT, OWNERS, AND AFFECTED TRADES.
Integrated Technical Systems, Inc. 8 Capital Drive, Wallingford, CT 06492
Phone (203)265-8100 Fax (203)949-4710
NORTH STONINGTON HIGH SCHOOL
AND MIDDLE SCHOOL NORTH STONINGTON, CONNECTICUT
INTRUSION DETECTION SYSTEM SECTION 28 16 00
SUBMITTAL
BANTON CONSTRUCTION COMPANY NORTH HAVEN, CONNECTICUT
APRIL 3, 2018
Integrated Technical Systems, Inc. 8 Capital Drive, Wallingford, CT 06492
Phone (203)265-8100 Fax (203)949-4710
APRIL 3, 2018
NORTH STONINGTON HIGH SCHOOL AND MIDDLE SCHOOL
NORTH STONINGTON, CONNECTICUT
INTRUSION DETECTION SYSTEM BILL OF MATERIALS
QUANTITY PART NUMBER MANUFACTURER DESCRIPTION
1 VISTA-128BPT HONEYWELL Burglary Alarm Control Panel
4 6160 HONEYWELL LCD Alarm Keypad
1 PS1270 POWER SONIC 12v 7ah Battery
6 4208SN HONEYWELL 8 Zone Remote Point Module
26 1078W-M INTERLOGIX Steel Door Contact
10 1076D-M INTERLOGIX Steel Door Contact
26 DS9360 BOSCH Panoramic Motion Detector
1 AL400UL ALTRONIX Power Supply / Charger
1 PS1270 POWER SONIC 12v 7ah Battery
The VISTA-128BPT is a powerful member of the Honeywell
family of commercial alarm panels, integrating burglary, CCTV
and access control functions. Many features are available that
extend the applications of the VISTA-128BPT while simplifying
end-user operation.
The VISTA-128BPT and VISTA-128BPTSIA are listed for
residential burglary, residential fire and commercial burglary
applications (see agency listings in this document for
more details). They are compatible with a wide range of
AlarmNet communications products for alarm reporting,
uploading /downloading and remote services.
Standard features (VISTA-128BPT and VISTA-128BPTSIA):• Provides nine style-B hardwired zones
• Supports up to 119 additional zonesusing a built-in polling (V-Plex®,multiplex) loop interface
• Supports up to 127 wireless zonesusing up to two 5800 series wirelessreceivers (fewer if using hardwireand/or polling loop zones)
• Provides one power-limited bell circuitdelivering 1.7Amp (max) at 12VDC
• Provides the ability to control eightseparate partitions independently,each functioning as if it had its ownseparate control
• Accommodates 150 user codes withseven authority levels
• Accommodates 32 keypad macrocommands per system
• Keeps a log of up to 512 events
• Supports up to 16 compatible two-wire smoke detectors on zone 1
• Zone 7 may be used for keyswitcharming/disarming
• Integrates with WIN-PAK accesscontrol systems to provide increasedusers, event log and scheduling
• Supports V-Plex addressableVistaKey access control (up to eightdoors and 250 cards)
• Easily programmed and maintainedby Compass Windows-baseddownloader
• Supports up to 96 programmableoutputs
• Programmable to meet SIA falsealarm prevention specifications. To meet UL approval for ANSI/SIA CP-01-2010, order part numberV128BPTSIA
• Supports up to six touchscreenAdvanced User Interface (AUI)devices (6272 or later)
• Smoke detector reset at keypad
• Quick exit
• Group bypass
• Arm faulted
• Event arming
• Carbon monoxide (CO) zonetype support
• Expanded high-speed RS-232capability for third party interface and automation
• Internet upload/download over AlarmNet GSM and/or IP communicators over the panel'skeypad (ECP) bus
• Ringback support for AlarmNetcommunicators (confirmation ofclosing report)
• 24-hour dialer test support forAlarmNet devices
• Supports V-Plex Smart Contactfeature for improved responsivenesson systems with many V-Plex zones
• Telco line cut detection
FEATURES
VISTA-128BPT SERIESPARTITIONED COMMERCIAL BURGLARYALARM CONTROL PANELS
Basic Hardwired Zones
Provides nine style-B hardwired zoneswith the following characteristics:
• EOLR supervision (optional for zones2-8) supporting N.O. or N.C. sensors(EOLR supervision required for fireand UL burglary installations)
• Individually assignable to one of eight partitions
• Up to 16 two-wire smoke detectors on zone 1
• Four-wire smoke or heat detectors on zones 1-8 (power to four-wiresmoke detectors must be supervisedwith an EOL device). Listed forresidential fire only.
Polling Loop Expansion
Supports up to 119 additional zonesusing a built-in polling (V-Plex, multiplex)loop interface. Current draw can totalup to 128mA. Polling loop zones havethe following characteristics:
• Must use V-Plex devices
• Supervised by control panel
• Individually assignable to one of eight partitions
• Supports VSI Module
• Supports 4297 Expander Module
• Maximum wiring distance = 12,000 feet
Wireless Expansion
Supports up to 127 wireless zonesusing up to two 5800 Series wirelessreceivers (fewer if using hardwireand/or polling loop zones).
Wireless zones have the followingcharacteristics:
• Supervised by control panel forcheck-in signals (except certainnon-supervised transmitters)
• Tamper protection for supervisedtransmitters
• Individually assignable to one of eight partitions
Scheduling
Provides the following schedulingcapabilities:
• Open/close schedules (for control ofarming/disarming and reporting)
• Holiday schedules (allows differenttime windows for open/closeschedules)
• Timed events (for activation of relays,auto-bypassing and unbypassing,auto-arming and disarming, etc.)
• Access schedules (for limiting systemaccess to users by time)
• End user output programming mode(provides 20 timers for output control)
Eight Partitions
Provides the ability to control eightseparate areas independently, eachfunctioning as if it had its own separatecontrol. Partitioning features include:
• A Common Lobby partition (1-8),which can be programmed to armautomatically when the last partitionthat shares the common lobby isarmed, and to disarm when the firstpartition that shares the commonlobby is disarmed
• A Master partition (9), used strictly toassign keypads for the purpose ofviewing the status of all eight partitionsat the same time (master keypads)
• All zones assignable to one of eight partitions
• Keypads assignable to one of eightpartitions or to Master partition 9 toview system status
• Ability to assign relays to one or alleight partitions
• Ability to display fire and/or burglaryand panic and/or trouble conditionsat all other partitions’ keypads(selectable option)
• Individually programmable accountnumber, entry delay and exit delay by partition
VISTA-128BPT SERIESPARTITIONED COMMERCIAL BURGLARY ALARM CONTROL PANELS
4293SN Adapters
VISTA-128BPT
4101SNRelay Module
FG1625SN Glassbreak 4208EX Eight-zoneV-Plex Expander and
4208SN Serialized Eight-zoneRemote Point Module
710StrobeLight
748Horn
5881WirelessReceiver
6160Console
4204Relay
Module
Phone Line to Central Station
GSMV iGSMV
or
Notification Appliances Keyswitch
Option4146
5193Series Smoke Detectors
V-Plex Loop
PC ConnectionSerial Printer
RS-232
DT7500SN V-Plex DUAL TEC
Motion Sensor
NOTE: Please refer to the website (www.honeywell.com/security/hsc) for the latest product information.
7847i
ECP Bus
or
ADDITIONAL FEATURES
VISTA-128BPT SERIESPARTITIONED COMMERCIAL BURGLARY ALARM CONTROL PANELS
Auxiliary Devices
• 4204 - Relay Module, four form C contacts
• 5881 Series - RF Receiver supporting5800 wireless detectors
• 6160 - Alpha Keypad/Annunciator
• 6220S - System Printer
Manual Pull Stations
• 5140MPS-1
• 5140MPS-2
V-Plex (addressable) Devices
• 4101SN Single Relay/Zone Module
• 4190SN Remote Point Module - two zones
• 4193SN Two-zone Serial InterfaceModule
• 4208EX - Eight-zone expander forULC commercial installations
• 4208SN Loop Expansion Module -eight zones
• 4209U Group Zoning Module -two/four zones
• 4293SN One-zone Serial Interface Module
• 4297 Isolation/Extender Module
• VSI Short/Overload Isolation Module
• 5193SD
• 5193SDT
Passive Infrared Detectors
• IS2500SN
• DT7500SN
V-Plex (Addressable) Contacts
• 4939SN-WH
• 4944SN-WH
• 4959SN
V-Plex Glassbreak Detectors
• FG1625SN
VISTA Interactive Phone Module
• 4286 VIP Module
Optional Communicators
• AlarmNet Internet/Intranetcommunicators and digital cellularcommunicators
Access Control
• VISTAKey V-Plex (addressable) Access Control
• VISTAKey-SK Starter Kit
• VISTAKey-EX Expansion Kit
Wireless Devices
• 5804 - Wireless Key
• 5804BD - Bidirectional Key
• 5804BDV - Bidirectional Key with voice
• 5816 - Door/Window Transmitter
• 5819 - Shock Sensor
• 5827BD - Bidirectional Keypad
• 5853 - Glassbreak Detector
• 5898 - Wireless DUAL TEC Motion Sensor
• 5800PIR-OD - Outdoor Motion Sensor
• 5870API - Asset Protection Device
• 5800PIR/5800PIR-RES/5800PIR-COM- Wireless Motion Detectors
• 5800CO (5800COA - Canada) -Wireless Carbon Monoxide Detector
• 5800RP - Wireless Repeater
• 5808W3 (5808W3A - Canada) -Wireless Smoke Detector
• 5809 - Wireless Heat Detector
Commercial Listed Wireless Devices
• 5817CB - Commercial UL Burglary,Universal Contact MonitoringTransmitter*
• 5869 - Commercial UL Wireless Hold-up Button*
• 5881ENHC and 5883H Receivers
*When used with 5881ENHC and/or 5883H receiver.
ACCESSORIES
6160Console
Glassbreak Detectors
4944SNContact
5881ENHCCommercial Wireless Receiver
(Max Two)
4204Relay
Module
Supports Up To 16 Conventional
Two-WireSmoke Detectors
4209UGroup Zoning
Module
4190SNRemote Point Module4193SN
Two-zone Serial Interface Module
4959SNOverhead Door ContactIS2500SN
V-Plex PIRMotion Sensor
4208UEight-zone
Expansion Module
ECP Bus
5808W3(5808W3A - Canada)
WirelessSmoke Detector
5800PIR SeriesWireless PIRs5816
Door/WindowTransmitter
5800Series
WirelessDevices
VISTAKey V-PlexAccess Control
Module
5817CB UniversalContact Monitoring
Transmitter
5869Commercial UL
Wireless Hold-upButton
ORDERING VISTA-128BPT Commercial Burglary Alarm Control Panel (UL Listed)
V128BPTSIA SIA Approved Enhanced Commercial Burglary Alarm Control Panel (UL Listed)
V128BPTCNKT VISTA-128BPT Commercial Burglary Alarm Control Panel with 1361CN Transformer (Canada only)
L/VSTA128BPTD/D April 2011 © 2011 Honeywell International Inc.
For more information:www.honeywell.com/security/hsc
Automation and Control SolutionsHoneywell Security & Communications2 Corporate Center Dr. Suite 100P.O. Box 9040Melville, NY 117471.800.467.5875 www.honeywell.com
VISTA-128BPT SERIESPARTITIONED COMMERCIAL BURGLARY ALARM CONTROL PANELS
Agency Listed to the Following Standards:
• UL609 Grade A Local MercantilePremises and Mercantile Safe and Vault
• UL1610 Grades A, AA Central Station
• UL365 Grades A, AA Police Connect
• UL985 Household Fire
• UL1023 Household Burglar AlarmCalifornia State Fire Marshall (CSFM)
• UL1635 - Digital AlarmCommunicator System Units
• CAN/ULC - S303
• CAN/ULC - S304
• CAN/ULC - S545
• CAN/ULC - S1023
• For commercial burglary attack proof requirements, use N5873V4BEattack proof enclosure provided inVISTA-ULKT kit
Electrical
• Voltage Input: From Honeywell No.1361 Plug-In Transformer or1361X10 transformer (for X-10installations) rated 16.5VAC, 40 VA
• Use 1361CN plug-in transformerfor Canada
• Alarm Sounder Output: 10VDC-13.8VDC, 1.7 amps max.,(UL1023, UL609 installations);750mA less aux. current draw(UL985 installations)
• Auxiliary Power Output: 9.6VDC-13.8VDC, 750mA max. For ULinstallations, the accessoriesconnected to the output must be ULListed, and rated to operate in theabove voltage range
• Backup Battery: 12VDC, 4AH or 7AHsealed-lead acid. YUASA NP4-12(12V, 4AH) or NP7-12 (12V, 7AH)recommended
• Standby Time: Four hours min. with 750mA aux. load using 7AH battery
• Circuit Protectors: PTC circuitbreakers are used on battery input toprotect against reverse batteryconnections and on alarm sounderoutput to protect against wiring faults(shorts). A solid state circuit breakeris used on auxiliary power output toprotect against wiring faults (shorts).
Main Dialer
• Formats Supported: ADEMCOContact ID with support for four-digitand ten-digit accounts andADEMCO 4 + 2 Express
• Line Seize: Double Pole
• Ringer Equivalence: 0.7B
Cabinet Dimensions
12-1/2" W X 14 1/2" H X 3" D
SPECIFICATIONS
6160 ALPHA DISPLAY KEYPAD
CO06010 L/6160/D September 2006 © 2006 Honeywell International Inc.
Honeywell Security & Custom Electronics Honeywell International Inc.PO Box 9035Syosset, NY 11791
www.honeywell.com
ORDERING 6160 Alpha Display Keypad
The 6160 Deluxe Keypad is easy to install and simple to
use. The attractive white console blends with any décor and
features a contoured, removable door that conceals
illuminated soft-touch keys. The 6160 also features a new
larger and brighter 32-character display with easy-to-read
plain-English status messages.
The oversized function keys are easily accessed even when
the keypad door is closed, and can be programmed for fire,
burglary, personal emergencies and other operations. Colored
self-adhesive labels are included.
• Large, easy-to-use keypad
• Keys continuously backlit for greater
visibility
• Speaker with audible beeps
to indicate:
- System status
- Entry/exit delay
- Other alarm situations
• Zones and system events displayed
in plain English
• No confusing blinking lights
• Four programmable function keys
• System functions clearly labeled
• Functions performed by just entering
security code plus command
• White with removable door blends
with any décor
FEATURES
Physical
• 5-5/16"H x 7-3/8"W x 1-3/16"D
(135mm x 190mm x 30mm)
Current
• Standby-40mA
• Activated Transmission-160mA
Wiring
• - (Black): Ground
• + (Red): +12 VDC (Aux. Power)
• D1 (Green): “Data in” to control panel
• D0 (Yellow): “Data out” from
control panel
Compatibility
• Fully compatible with all
VISTA controls.
SPECIFICATIONS
WITH DOOR ATTACHED
WITHOUT DOOR
MODE L P S -1270 F 1 12 Volt 7.0 Amp. Hr.
Warning: R isk of fire, explos ion, or burns .Do not disassemble, heat above 60 C , or incinerate.
R echargeable S ealed Lead-Acid B atteryDC power, constant voltage chargeC ycle use: 14.4 - 15.0V (20 C )S tandby use: 13.5 - 13.8V (20 C )Initial current: 2.1A MAX
80
13340
01000
S ealed R echargeableB attery
120070260211
L
HT H
W
6.35
4.75
3.2F1 F2
0.87.95
6.35
3.4
0.8
Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice.
Physical Dimensions: in (mm)
Features
• Absorbent Glass Mat (AGM) technology for superior performance
• Valve regulated, spill proof construction allows safe operation in any position
• Power/volume ratio yielding unrivaled energy density
• Rugged impact resistant ABS case and cover (UL94-HB)
• Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified
• U.L. recognized under file number MH 20845
Performance Specifications
Nominal Voltage .......................................................12 volts (6 cells)
Nominal Capacity
20-hr. (350mA to 10.50 volts) .......................................... 7.00 AH
10-hr. (650mA to 10.50 volts) .......................................... 6.50 AH
5-hr. (1.2A to 10.20 volts) ............................................. 6.00 AH
1-hr. (4.5A to 9.00 volts) ............................................... 4.50 AH
15-min. (14A to 9.00 volts) ..................................................3.50 AH
Approximate Weight ......................................... 4.80 lbs. (2.18 kg)
Energy Density (20-hr. rate) ............... 1.49 W-h/in3 (90.95 W-h/l)
Specific Energy (20-hr. rate) ............ 17.50 W-h/lb (38.58 W-h/kg)
Internal Resistance (approx.) ..................................... 23 milliohms
Max Discharge Current (7 Min.) ............................... 21.0 amperes
Max Short-Duration Discharge Current (10 Sec.) .... 70.0 amperes
Shelf Life (% of nominal capacity at 68°F (20°C)
1 Month ................................................................................. 97%
3 Months ................................................................................ 91%
6 Months ............................................................................... 83%
Operating Temperature Range
Charge ................................................ -4°F (-20°C) to 122°F (50°C)
Discharge ............................................ -40°F (-40°C) to 140°F (60°C)
Case ..................................................................................ABS Plastic
Power-Sonic Chargers .................................PSC-12800A, 12800A-C
PS-1270
www.power-sonic.com
Terminals: (mm)
12 Volt 7.0 AH
L: 5.95 (151) W: 2.56 (65) H: 3.70 (94) HT: 3.86 (98)
• F1 - Quick disconnect tabs, 0.187” x 0.032”- Mate with AMP. INC. FASTON “187” series
• F2 - Quick disconnect tabs, 0.250” x 0.032” - Mate with AMP. INC FASTON “250” series
OR
CORPORATE OFFICE • 7550 Panasonic Way • San Diego, CA 92154 • USA • Tel: +1-619-661-2020 • Fax: +1-619-661-3650
CUSTOMER SERVICETel: +1-619-661-2030 Fax: [email protected]
INTERNATIONAL SALESTel: +1-650-364-5001 Fax: [email protected]
DOMESTIC SALESTel: +1-619-661-2020Fax: [email protected]
TECHNICAL SUPPORTTel: +1-619-661-2020 Fax: [email protected]
Contact Information www.power-sonic.com
0816 1M
© 2016. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners.
ChargingCycle Applications: Limit initial current to 2.1A. Charge until battery voltage (under charge) reaches 14.4 to 14.7 volts at 68°F (20°C). Hold at 14.4 to 14.7 volts until current drops to under 70mA. Battery is fully charged under these conditions, and charger should be disconnected or switched to “float” voltage.
“Float” or “Stand-By” Service: Hold battery across constant voltage source of 13.5 to 13.8 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition.
Note: Due to the self-discharge characteristics of this type of battery, it is imperative that they be charged within 6 months of storage, otherwise permanent loss of capacity might occur as a result of sulfation.
ChargersPower-Sonic offers a wide range of chargers suitable for batteries up to 100AH. Please refer to the Charger Selection Guide in our specification sheets for “C-Series Switch Mode Chargers” and “Transformer Type A and F Series”. Please contact our Technical department for advice if you have difficulty in locating suitable models.
Cap
acity
Ret
entio
n R
atio
(%)
Standing Period (Months)
100
80
60
40
00 2 4 6 8 10 12 14 16 18 20
40oC(104oF)
30oC(86oF)
20oC(68oF)
5oC(41oF)
Charging is not necessary unless 100% of capacity is required.
Charging beforeuse is necessaryto help recoverfull capacity.
Charge may failto restore fullcapacity. Do notlet batteries reachthis state.
100
80
60
40
20
00 1 2 3 4
Ambient T
rging V age2.25 - 2.30
Ret
e
paci
ty %
Years
120
100
80
60
40
20
00 200 400 600 800 1000 1200
Number of Cycles
1. Discharge Current 0.2C (Final Voltage 1.7V/Cell)2. Charge Current: 0.1C3. Ambient Temperature: 20oC to 25oC (68oF to 77oF)R
eten
tion
Cap
acity
(%)
DischargeDepth 30%
DischargeDepth 100%
DischargeDepth 50%
Discharge Characteristics
Discharge Time vs. Discharge Current
Shelf Life & Storage
Life Characteristics in Stand-By Use
Life Characteristics in Cyclic Use
PS-1270 12 Volt 7.0 AH®
Further InformationPlease refer to our website www.power-sonic.com for a complete range of useful downloads, such as product catalogs, material safety data sheets (MSDS), ISO certification, etc..
13.0
12.0
11.0
10.0
9.0
8.0
14.0
Term
inal
Vol
tage
(V)
Ambient Temperature 20oC (68oF)
1.2 2.4 6 12 24 36 48 1 2 4 6 8 10 20 4 0
Discharge Time
FinalVoltage
min h
0.350.701.4
3.5
7.0
14
0.35 0.70 1.4 3.5 7.0 14Discharge Current (A)
201510
5
2
1
30
10
5
Dis
char
ge T
ime
40oC (104oF)20oC (68oF) 0oC (32oF)
min
h
10.2V
9.6V
9.0V
8.1V
FinalVoltage10.5V
Serialized Eight Zone Remote Point Module
4208SN
The 4208SN Remote Point Module (RPM) is an eight-zone expander that allows the use of available expansion zones on
ADEMCO controls that support V-Plex polling loop devices.
• Can be used on controls thatsupport up to 250 zones
• Can be optionally powered from anexternal DC power supply to reduce the amount of current drawfrom the polling loop
• Uniquely identifies eight EOLRsupervised zones (all zones use 10K resistors, supplied)
• Each zone is identified by a uniqueserial number, which is assigned viaon-board DIP Switches
• Detects faults on all zones within400ms of occurrence
• Loops A & B can be programmedfor fast (10ms) response
• Provides cover tamper protection,which may be enabled or disabledvia on-board DIP Switches
FEATURES
Physical
• 6-7/16”W X 4-1/4”H X 1-1/4” D163mm x 108mm x 32mm
Electrical
Polling Loop Voltage
• 11V nominal; 8.7 - 14VDC rangeCurrent
• 33.6mA when polling loop providespower to module, 0.6mA when12VDC input provides power tomodule. See chart below.
12VDC Input Voltage• 12V nominal; 9.4 - 14VDC range
Expander Sensor Loop Response
• Slow: 400msec (all loops)• Fast: 10msec (option for loops A
and B)Expander Sensor Loop Current
• 0.52mA (normal)• 1.3mA (shorted)NOTE: These currents apply whenpolling loop input = 11VDC and10VDC input is not connected toexternal supply
Sensor Loop Max. Resistance
• Up to 300 ohms of wire resistance +10K EOLR
Agency Listings
• UL 985 Household Fire• UL 1023 Household Burglary• UL 609 Commercial Burglary• UL 864 Commercial Fire• CSFM• FM (Pending)• CUL• CE (requires #N6361)
SPECIFICATIONS
Power Input Source Current Draw (all zones shorted)
From Polling Loop From External Power
Polling Loop Only 33.6m AN/A
Polling Loop and 0.6mA 33mAExternal Power Input
For UL Listed Commercial FireUsage:Use N.O. contacts. Style Bsupervise these loops using Model#EOL 100 fire listed 10K EOLRs(purchased separately).For UL Listed CommercialBurglary Usage:Use N.O. or N.C. contacts.Supervise using EOLRs supplied.
4208SN Eight Zone Expander
ORDERING
Steel Door Contacts1078/1076 Series
interlogix.com
Intrusion
The Interlogix 1078 Series Steel Door contacts are designed specifically
for use in the steel doors commonly found in commercial building
applications. The unique housing design features a rugged unibody
construction with flexible ribbed sides for quick, secure installation
without gluing. The magnet housing isolates the magnet from the
surrounding steel for maximum gap distances, both make and break.
Over seven models including: Wide Gap, SPDT, DPDT, and Biased for
High Security applications make the 1078 Series the most widely used
and comprehensive line available.
On available models a terminal connection (T) makes installation easier.
Simply strip the wire, insert it into the terminal block and tighten. The
terminal accepts any wire size from 14 to 22 gauge, and has a unique
one piece design for added strength.
An optional Rare Earth Magnet is available. It is designed for use
in metal entry/exit doors with a channel in the top of the door. The
magnet eliminates the need to cut a mounting hole in the door channel.
The flexible magnet housing can be compressed to accommodate
a variety of channel widths for quick, easy installation. Adhesive is
recommended.
The contact contains a hermetically sealed magnetic reed switch. The
reed shall be potted in the contact housing with a polyurethane based
compound. Contact and magnet housing shall snap-lock into a 3/4" or
1" dia. hole. Housings shall be molded of flame retardant ABS plastic.
Color of housings shall be off-white, gray or mahogany brown. The
magnet shall be made of Alnico V. Rare Earth Magnet shall be made of
neodymium iron boron.
Snap-lock insulation bushing for tight fit and maximum gap in steel.
Both contact and magnet plastic housings are constructed of one piece
of thick-walled ABS plastic for maximum strength and durability.
OVERVIEW STANDARD FEATURES
Steel Door Contacts1078/1076 Series
North AmericaT 855-286-8889
Latin AmericaT 561-998-6114
interlogix.com
SpecificationsForm A: (R)1078, 1078W, 1078C, 1078CT, 1078CTWVoltage 100V AC/DC max.
Current 0.5 A max.
Power 7.5 W max.
Form C: 1076, 1076W, 1076D, 1076C(D), 1076CW, 1076CHVoltage 30V AC/DC max.
Current 0.25 A max.
Power 3.0 W max.
Specifications subject to change without notice.
© 2013 United Technologies Corporation.
All rights reserved.
Interlogix is part of UTC Climate, Controls & Security,
a unit of United Technologies Corporation.
306-3685 2013/11 (75103)
Dimensional Diagram
Models: (R)1078, 1078W, 1076, 1076W, 1076D
Ordering Information
1076CH-NRecessed Steel Door Contact w/Wire Leads, 3/4" Diameter,
Higher Security, Biased for Higher Security Applications, Single
Pole-Double Throw, White
1076C-M Recessed Steel Door Contact w/Wire Leads, 3/4" Diameter,
SPDT, 3/8" Gap Size, Single Pole-Double Throw, Brown
1076C-N Recessed Steel Door Contact w/Wire Leads, 3/4" Diameter,
SPDT, 3/8" Gap Size, Single Pole-Double Throw, White
1076CW-M Recessed Steel Door Contact w/Wire Leads, 3/4" Diameter, Wide
Gap, SPDT, 3/4" Gap Size, Single Pole-Double Throw, Brown
1076CW-N Recessed Steel Door Contact w/Wire Leads, 3/4" Diameter, Wide
Gap, SPDT, 3/4" Gap Size, Single Pole-Double Throw, White
1076D-G Recessed Steel Door Contact w/Wire Leads, 1" Diameter,
DPDT, 1/2" Gap Size, Double Pole-Double Throw, Gray
1076D-M Recessed Steel Door Contact w/Wire Leads, 1" Diameter,
DPDT, 1/2" Gap Size, Double Pole-Double Throw, Brown
1076D-N Recessed Steel Door Contact w/Wire Leads, 1" Diameter,
DPDT, 1/2" Gap Size, Double Pole-Double Throw, White
1076-G Recessed Steel Door Contact w/Wire Leads, 1" Diameter,
SPDT, 1/2" Gap Size, Single Pole-Double Throw, Gray
1076H-NRecessed Steel Door Contact w/Wire Leads, 1" Diameter,
High Security, SPDT, Biased for Higher Security, 1/2" Gap,
Single Pole-Double Throw, White
1076-M Recessed Steel Door Contact w/Wire Leads, 1" Diameter,
SPDT, 1/2" Gap Size, Single Pole-Double Throw, Brown
1076-N Recessed Steel Door Contact w/Wire Leads, 1" Diameter,
SPDT, 1/2" Gap Size, Single Pole-Double Throw, White
1076W-M Recessed Steel Door Contact w/Wire Leads, 1" Diameter, SPDT,
Wide Gap, 1" Gap Size, Single Pole-Double Throw, Brown
1076W-N Recessed Steel Door Contact w/Wire Leads, 1" Diameter, SPDT,
Wide Gap, 1" Gap Size, Single Pole-Double Throw, White
1078C1-M 1078C w/1929 Magnet, Brown
1078C-G Recessed Steel Door Contact w/Wire Leads, 3/4" Diameter,
Closed Loop, 3/8” Gap Size, Gray
1078C-M Recessed Steel Door Contact w/Wire Leads, 3/4" Diameter,
Closed Loop, 3/8" Gap Size, Brown
1078C-N Recessed Steel Door Contact w/Wire Leads, 3/4" Diameter,
Closed Loop, 3/8" Gap Size, White
1078CT-M Recessed Steel Door Terminal Contact, 3/4" Diameter, 7/8" Gap
Size (3/8" in Steel), Brown
1078CT-N Recessed Steel Door Terminal Contact, 3/4" Diameter, 7/8" Gap
Size (3/8" in Steel), White
1078CTW-N Recessed Steel Door Terminal Contact, 3/4" Diameter, Wide Gap,
2" Gap Size (3/4" in Steel), White
1078CW-G Recessed Steel Door Contact w/Wire Leads, 3/4" Diameter,
Closed Loop, Wide Gap, 3/4" Gap Size, Gray
1078CW-M Recessed Steel Door Contact w/Wire Leads, 3/4" Diameter,
Closed Loop, Wide Gap, 3/4" Gap Size, Brown
1078CW-N Recessed Steel Door Contact w/Wire Leads, 3/4" Diameter,
Closed Loop, Wide Gap, 3/4" Gap Size, White
1078-G Recessed Steel Door Contact w/Wire Leads, 1" Diameter,
1/2" Gap Size, Closed Loop, Gray
1078-M Recessed Steel Door Contact w/Wire Leads, 1" Diameter,
1/2" Gap Size, Closed Loop, Brown
1078-N Recessed Steel Door Contact w/Wire Leads, 1" Diameter,
1/2" Gap Size, Closed Loop, White
1078W-G Recessed Steel Door Contact w/Wire Leads, 1" Diameter, Wide
Gap, 1" Gap Size, Closed Loop, Gray
1078W-M Recessed Steel Door Contact w/Wire Leads, 1" Diameter, Wide
Gap, 1" Gap Size, Closed Loop, Brown
1078W-N Recessed Steel Door Contact w/Wire Leads, 1" Diameter, Wide
Gap, 1" Gap Size. Closed Loop, White
1078WN-3.3K Recessed Steel Door Contact w/Wire Leads, 1" Diameter, Wide
Gap, 3.3K Ohm Resistor, 1" Gap Size. Closed Loop, White
R1078-M Mini-Max Recessed Steel Door Contact w/Wire Leads, 1"
Diameter, 1/2" Gap Size, Brown
R1078-N Mini-Max Recessed Steel Door Contact w/Wire Leads, 1"
Diameter, 1/2" Gap Size, White
1.00 in.2.54cm
1.125 in.(2.86cm)
1.125 in.(2.86cm)
1.563 in.(3.97cm)
Magnet Part No. 1921(included)
1.125 in.(2.86cm)
Magnet Part No. 1921C(included)
.875 in.(2.22cm)
1.563 in.(3.97cm) .375 in.
(.962mm)
.750 in.(1.91cm)
.375 in.(.962cm)
.750 in.(1.91cm)
1.625 in.(4.13cm)
0.938 in.(2.36cm)
Magnet Part No. 1929(included)
1.56 in.(3.96cm)
Models: 1078C, 1076C, 1076CW, 1076CH
Models: 1078CT, 1076CTW
Rare Earth Magnet
(R) prefix indicates
Rare Earth Magnet
Protected by
U.S. Patent 5,844,458.
0.5 in.1.27cm
Legs may be cut for height adjustment
0.89 in.(2.26cm)
1.813 in.(4.60cm)
0.625 in.(1.59cm)
1.625 in.(4.13cm)
Recessed Steel Door Contact w/Wire Leads, 1" Diameter, Wide1078W-MGap, 1" Gap Size, Closed Loop, Brown
Recessed Steel Door Contact w/Wire Leads, 1" Diameter,1076D-MDPDT, 1/2" Gap Size, Double Pole-Double Throw, Brown
DescriptionAltronix AL400UL power supply/charger converts a 115VAC input into a single
12VDC or 24VDC Class 2 Rated power-limited output. It also offers a suite of fea-
tures that includes AC fail supervision and low battery supervision.
AL400ULPower Supply/Charger
Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USAphone: +1 718.567.8181 | fax: +1 718.567.9056 | email: [email protected] | www.altronix.com
Rev. AL400UL-01122017
Input Voltage 115VAC, 60Hz, 3.5A.
Output Class 2 Rated power-limited output. Voltage 12VDC or 24VDC selectable. Current 4A @ 12VDC or 3A @ 24VDC supply current. Other Short circuit and thermal overload protection. Filtered and regulated.
Back-up Battery (not included) Type Sealed lead acid or gel type. Failover Upon AC loss, instantaneous.
Supervision AC Failure Form “C” contacts. Battery Form “C” contacts.
Indicators (LED) Input Input voltage is present. DC Output Powered.
Agency Listings UL: Access Control UL294 Burglar Alarm UL603 Hospital Signaling UL1069 Fire Alarm UL1481 MEA NYC Department of Buildings Approved. CSFM California State Fire Marshal Approved.
Physical and Environmental Dimensions (H x W x D) 12.25” x 7.25” x 4.5” (311.15mm x 184.15mm x 114.3mm). Product Weight 11.7 lbs. (5.3 kg). Shipping Weight 12.4 lbs. (5.6 kg). Temperature Operating 0ºC to 49ºC (32ºF to 120ºF). Storage -20ºC to 70ºC (-4ºF to 158ºF). Relative Humidity 85% +/-5%. BTU/Hr (approx.): 12VDC: 25 BTU/Hr. 24VDC: 37 BTU/Hr.
Specifications
AL400UL