Embed Size (px)
Citation preview
page 1
V.1 Russell Gries's prospective on the activation sequence of the ABHA torus using electricity.
This document was created by Russell Gries to help us understand the missing link between the vortex based mathematics’s toroid skin and the proper way to energize the Rodin/ABHA coil with electricity. I have spent many hours working on this document and would appreciate any feedback on this document to improve/fix any problems or missing information. This energizing is just the surface topology, not true 3D as we are only working with the surface of the toroid. Also if you build and test the Rodin/ABHA coil please let me know as I would like to work with you as well as document all findings in one document for all to see.
This document is free to all and must not be sold in anyway. Thank you. ~Russ
Email: [email protected]
There is a three part searies videos that go along with this document. They can be found here:Part 1: http://www.youtube.com/watch?v=4lQhuXzIJgQPart 2: http://www.youtube.com/watch?v=ACxx-7L1RaEPart 3: http://www.youtube.com/watch?v=Ko3frb8G14w
Page 2
1 2 1 22 1 5 7 2 1 5 7
3 9 6 6 9 3 1 > > > > > > > > > > 3 9 6 6 9 3 > > > > > > > > > > > 24 8 7 5 1 2 4 8 4 8 7 5 1 2 4 8
5 7 8 4 2 1 5 7 8 4 5 7 8 4 2 1 5 7 8 46 6 9 3 3 9 6 6 9 3 3 9 4 > > > > > > 6 6 9 3 3 9 6 6 9 3 3 9 > > > > > > > > 5
7 5 1 2 4 8 7 5 1 2 4 8 7 5 7 5 1 2 4 8 7 5 1 2 4 8 7 58 4 2 1 5 7 8 4 2 1 5 7 8 4 2 1 8 4 2 1 5 7 8 4 2 1 5 7 8 4 2 1
9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 3 > > > > 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 > > > > > 34 8 7 5 1 2 4 8 7 5 1 2 4 8 7 5 4 8 7 5 1 2 4 8 7 5 1 2 4 8 7 58 4 2 1 5 7 8 4 2 1 5 7 8 4 8 4 2 1 5 7 8 4 2 1 5 7 8 43 9 6 6 9 3 3 9 6 6 9 3 2 > > > > > > > 3 9 6 6 9 3 3 9 6 6 9 3 > > > > > > > > 17 5 1 2 4 8 7 5 1 2 7 5 1 2 4 8 7 5 1 22 1 5 7 8 4 2 1 2 1 5 7 8 4 2 16 6 9 3 3 9 5 > > > > > > > > > > 6 6 9 3 3 9 > > > > > > > > > > > 41 2 4 8 1 2 4 85 7 5 7
The symbol to the left is the symbol of enlightenment, courtesy of Adam from vortexmath.com along with other photos in this document. This symbol is where all the vortex math comes from, Marko Rodin is the discoverer of this. The reason I choose this version of the symbol is that it matches the color's I will be using for this document. You can see that there are two triangles and a point of a triangle Thus there are three colors and each color is a family number group. These family number groups are energized in a sequence of three. We will call them stage A, stage B and stage C. One thing that you need to realize that there are both positive and negative numbers. So for a positive 9 there is also a negative 9 behind it and so on for all the numbers. So there are three parts and each part has a positive and negative this is referred to as a binary triplet. It's a flip/flop or on/off but it works in threes. Now what I have discovered in my research is that when things are not positive or negative they are neutral or “floating”. So we have stage A which is the blue or 2,5,8. Then stage B is the red or 3,6,9 and stage C is green or 1,4,7. There is never two stages on at the same time in one nested vorticity circuit. It's either A, B or C. That means they are 120 degrees out of phase with each other. The rest of the document will explain.
I have taken a big leap into the math, so the basics of the math are not
described in this document. Please see Marko Rodin
or Randy Powell's Videos
for more detailed information. The
videos can be found on
YouTube by searching there
names. Below you can see a 2D view of the skin of a 9x9 torus. With the symbol of enlightenment we can make a 2D map like this. On
this map below there are three nested vortice circuits. According to Randy Powell the smallest map you can make is a 9x9. You can see the numbers in a solid highlight box are connecting the nested vortice circuits together in a continues loop. There are
three nested vortice circuits on a 9x9 map. The color numbers are positive. The black numbers are negative counter draft space or “gravity”. With this 2D map you can create a 3D torus so the 2D map wraps around the torus. Keep in mind that the three
nested vortice circuits never connect to each other. They are all isolated.
9x9 torus skin with no outlines
9x9 torus skin labeled with
nested vortices outlined
Page 3
Black arrows are negative counter draft space or “gravity”.
Orange arrows are emanating from the center of the toroid.
1 2 1 2 1 22 1 5 7 2 1 5 7 2 1 5 7
3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 34 8 7 5 1 2 4 8 4 8 7 5 1 2 4 8 4 8 7 5 1 2 4 8
5 7 8 4 2 1 5 7 8 4 5 7 8 4 2 1 5 7 8 4 5 7 8 4 2 1 5 7 8 46 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9
7 5 1 2 4 8 7 5 1 2 4 8 7 5 7 5 1 2 4 8 7 5 1 2 4 8 7 5 7 5 1 2 4 8 7 5 1 2 4 8 7 58 4 2 1 5 7 8 4 2 1 5 7 8 4 2 1 8 4 2 1 5 7 8 4 2 1 5 7 8 4 2 1 8 4 2 1 5 7 8 4 2 1 5 7 8 4 2 1
9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 64 8 7 5 1 2 4 8 7 5 1 2 4 8 7 5 4 8 7 5 1 2 4 8 7 5 1 2 4 8 7 5 4 8 7 5 1 2 4 8 7 5 1 2 4 8 7 5
8 4 2 1 5 7 8 4 2 1 5 7 8 4 8 4 2 1 5 7 8 4 2 1 5 7 8 4 8 4 2 1 5 7 8 4 2 1 5 7 8 43 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3
7 5 1 2 4 8 7 5 1 2 7 5 1 2 4 8 7 5 1 2 7 5 1 2 4 8 7 5 1 22 1 5 7 8 4 2 1 2 1 5 7 8 4 2 1 2 1 5 7 8 4 2 1
6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 91 2 4 8 1 2 4 8 1 2 4 8
5 7 5 7 5 7
Below is the top view of the 3D torus skin. This is the 9x9, they are highlighted for each stage same as above.
Stage A Stage B Stage C
Here you can see the 2D torus map and the emanations moving in straight lines that are energizing the torus skin in stages of the three family number groups. Blue, Red and Green.
Activation sequence,
stage A, 2,5,8 halving circuit
Activation sequence,
stage B, 3,6,9 “god space”
Activation sequence,
stage C, 1,4,7 dubbing circuit.
Page 4This in one nested vortice circuit on the 9x9 torus
5 7 8 4 2 1 5 7 8 4 2 1 5 7 8 4 2 1 5 7 8 4 2 16 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 > > > > > > > > > > 6 9 3 3 9 61 2 4 8 7 5 1 2 4 8 7 5 1 2 4 8 7 5 1 2 4 8 7 5
Positive NegativePositive
Positive stage 5 7 8 4 2 1 5 7 8 4 2 1 C 5 7 8 4 2 1A B C > > > > A 6 9 3 3 9 6 A 6 9 3 3 9 6 > > > > B 6 9 3 3 9 6
1 4 7 x 1 2 4 8 7 5 1 2 4 8 7 5 A 1 2 4 8 7 5Dubbing 3 6 9 x
2 5 8 5 7 8 4 2 1 5 7 8 4 2 11 4 7 > > > > B 6 9 3 3 9 6 B 6 9 3 3 9 6
Halving 3 6 9 1 2 4 8 7 5 1 2 4 8 7 5Negative2 5 8 x
> > > 5 7 8 4 2 1 5 7 8 4 2 1 A 5 7 8 4 2 1
> > > > > > > C 6 9 3 3 9 6 C 6 9 3 3 9 6 > > > > B 6 9 3 3 9 6
> > > 1 2 4 8 7 5 1 2 4 8 7 5 C 1 2 4 8 7 5
> > >
> > >
Negative stageA B C A B C
1 4 7Dubbing 3 6 9 9 9 9
2 5 8 x 8 1 8 1 8 11 4 7
Halving 3 6 9 x 7 2 7 2 7 22 5 8 x Positive >
6 3 6 3 6 35 4 5 4 5 4
A B C
9 9 98 1 8 1 8 1
7 2 7 2 7 2Negative >
6 3 6 3 6 35 4 5 4 5 4
The pattern is repeating so we only need this one section of it.
I will be referencing just one section of the nested vortice circuit Shown on the left.
Everything on this page happens in three stages A, B and C. Everything that is highlighted is positive or negative. All family
number groups have both positive and negative numbers that are on at the same time. All The A's in these diagrams are on at the
same time, all B are on at the same time and C are on at the same time.
Truth table for energizing one nested vorticity
circuit FNG's
Truth table for energizing one nested vorticity
circuit FNG's
Page 5
Below is one nested vortice circuit showed using a sign wave to show the positive and negative voltage penitential.
5 7 8 4 2 1 2 8 5 2 8 5 2 8 5Positive > A 6 9 3 3 9 6 1 7 4 4 7 1 1 7 4 4 7 1 1 7 4 4 7 1
1 2 4 8 7 5 5 8 2 5 8 2 5 8 2
Positive >5 7 8 4 2 1 Neutral
Negative > A 6 9 3 3 9 6 Negative >1 2 4 8 7 5
5 7 8 4 2 1 6 3 9 6 3 9 6 3 9Positive > B 6 9 3 3 9 6 all other numbers / circuits here <
1 2 4 8 7 5 9 3 6 9 3 6 9 3 6PositiveNeutral >
5 7 8 4 2 1 NegativeNegative > B 6 9 3 3 9 6
1 2 4 8 7 5
5 7 8 4 2 1 7 4 1 7 4 1 7 4 1Positive > C 6 9 3 3 9 6 5 2 8 8 2 5 5 2 8 8 2 5 5 2 8 8 2 5
1 2 4 8 7 5 1 4 7 1 4 7 1 4 7
Positive >5 7 8 4 2 1 Neutral
Negative > C 6 9 3 3 9 6 Negative >1 2 4 8 7 5
In theory if you were to take the positive numbers and make them a positive voltage, and the negative numbers and make them a negative voltage, then everything that is off is a zero voltage or floating. Below is what it would look like as an electrical signal. Below I will be using a sine wave. All the voltages and wave forms need to be explored. This document is just to show the theory of design.
When a number/voltage is off it is neutral, you can see in the diagrams that each number pattern is 180 degrees out of phase. Also keep in mind that in each stage when the positive is on the negative is neutral. Also when the negative is on the positive is neutra.l So even tho the numbers are active at the same time, they never are electrically on (high or low) at the same time since they are 180 degrees out of phase.
Above is the half wave AC sign wave form (green) is positive and (blue) is negative.
At this time all other numbers are neutral and are not
energized at all.
Above is the higher energy you cant see. “The god thing”
Above is the half wave AC sign wave (green) is positive and (blue) is negative.
Page 6
LegendThis in one nested vorticity circuit on the 9x9 torus
P = positive 5 7 8 4 2 1 5 7 8 4 2 1 5 7 8 4 2 1N = negative 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6Z = zero 1 2 4 8 7 5 1 2 4 8 7 5 1 2 4 8 7 5
Here is the halving circuit. It will be one wire on your toroid. We will call it L2. > > 5 7 8 4 2 1 5 7 8 4 2 1 5 7 8 4 2 1Here you have a blank on your toroid. This is the gap space (no wire). > > 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6Here is the doubling circuit. It will be one wire on your toroid. We will call it L1. > > 1 2 4 8 7 5 1 2 4 8 7 5 1 2 4 8 7 5
e
In the boxes below the voltage will be the same but the wave form is different.
Stage A Stage AL1 > P > L1 > P >
120 Degrees > > Z 120 Degrees > > ZL2 > N > L2 > N >
Stage B Stage B> >
120 Degrees > > > 120 Degrees > > >> >
Stage C Stage CL2 > P > L2 > P >
120 Degrees > > Z 120 Degrees > > ZL1 > N > L1 > N >
Notice that L1 is 180 degrees out of phase between stages A and C Notice that L1 is 180 degrees out of phase between stages A and CThe wave form is a half wave sign wave. The signal is 50% duty cycle square wave.
Below is one nested vortice circuit and how it should be energized. one nested vortice circuit consists of 2 wires and a gap space. The two wires will be energized in three stages. They will be just like above. one is the halving, one is the gap space and one is the doubling.
Sign wave
Square wave.
Everything in this box is happening in one cycle. We will call one cycle 360 degrees to make it easier.
Everything in this box is happening in one cycle. We will call one cycle 360 degrees to make it easier.
Page 7
1 2 NVC 2 >
2 1 5 73 9 6 6 9 3
4 8 7 5 1 2 4 85 7 8 4 2 1 5 7 8 4
6 6 9 3 3 9 6 6 9 3 3 97 5 1 2 4 8 7 5 1 2 4 8 7 5 < NVC 1
8 4 2 1 5 7 8 4 2 1 5 7 8 4 2 19 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6
4 8 7 5 1 2 4 8 7 5 1 2 4 8 7 58 4 2 1 5 7 8 4 2 1 5 7 8 4
3 9 6 6 9 3 3 9 6 6 9 37 5 1 2 4 8 7 5 1 2
2 1 5 7 8 4 2 1NVC 1 6 6 9 3 3 9
1 2 4 8NVC 2 5 7 NVC 3 >
NVC 3
Thus far we have been talking about how to energize one nested vortice circuit. From now on I will be calling a nested vortice circuit : (NVC). On a 9x9 torus there are three NVC's. As before there are two wires and a gap for each NVC. If we are energizing a 9x9 torus we will have 6 wires. We will call the wires L1, L2, L3, L4, L5, L6. As before L1 and L2 is NVC one, L3, L4 is NVC two and L5, L6 is NVC three. Each NVC contains a gap space. Each NVC is 120 degrees off from the last NVC when energized. Spacing of the NVC are 120 degrees out of phase. So to recap. While there are three stages going in one NVC the L's and gap space are also cycling in threes. The NVC's are working in 120 degree phases with each other. This is what creates the harmonics!
In this torus below the three arrows are different lengths. Each arrow is pointing to a 6 in a different NVC. This is the 120 deference between each NVC. This is why the NVC's are energized 120 degrees out of phase.
In this 2d map below the three arrows are different lengths. Each arrow is pointing to a 6 in a different NVC. This is better seen in the next diagram. This is the 120 deference between each NVC.
Page 8
This is the three stages in one NVC.
Stage A A B CL1 > P >
A 120 Degrees > > ZL2 > N > This is the three stages in one NVC cycling.
Stage B> A B C A B C A B C A B C A B C A B C A B C
B 120 Degrees > > >>
Stage CL2 > P >
C 120 Degrees > > ZL1 > N >
Start Cycle N
VC one
Start Cycle N
VC tw
oStart C
ycle NVC
three
> > >
> > >
> > A B C A B C A B C A B C A B C A B C A B C> > A B C A B C A B C A B C A B C A B C A B C> > A B C A B C A B C A B C A B C A B C A B C
This is a the chart from earlier. This is one NVC and its three stages, I will be using the A, B and C as the three stages in one NVC in the next diagram.
In this diagram below each NVC is shifted 120 degrees off from the other NVC's. This is the phasing which creates the harmonics. This is all three NVC for the 9x9 torus.
This line will indicate NVC one and its three stages, A,B,C.This line will indicate NVC two and its three stages, A,B,CThis line will indicate NVC three and its three stages, A,B,C.
Page 9
Yellow is L1, Green is L2 and they are part of NVC one.
Blue is L3, Orange is L4 and they are apart of NVC two.
Brown is L5, Black is L6 and they are apart of NVC three.
This 9x9 torus is labeled with different colors. Each color is representing a wire. The colors correspond like this:
There is a gap space in each NVC, it is located between each wire in the NVC group, this is represented in the light gray color.
The wires are hard to see on a 2D torus The wire goes around the torus and back to the same point it started at. This perspective view is easier to see how the wires wrap around the torus.
Page 10
Stage A Stage B Stage C
Now I'm going to discuss the 36x18 as it is the most common seen number torus. I'm not going to go into the details on the torus, but I will show you the sequence of activation. Here you can see the 3 stages in the NVC's. It is just as before but with more tiles and more NVC's
Page 11
Light Red NVC one , L1, L2Light Green NVC two , L3, L4Light Blue NVC three , L5, L6Dark Red NVC four , L7, L8Dark Green NVC five , L9,L10Dark Blue NVC six , L11, L12
The 36 x 18 is only slightly different than the 9x9; the main deference is that instead of there being three NVC's, there are 6 NVC's. In this diagram I have highlighted the NVC's, Red, Green and Blue. There are two shades of each color; these are different NVC's. Since there are double the NVC's, then the amount of wires also double. As before, for each NVC there are 2 wires and a gap space.
The wires still follow the highlighted colors, but instead of the wire going around the torus once before starting at the beginning, they go around twice. Take the light red for instance. If we start at the top and follow the red around you can see it goes in the center of torus, 90 degrees from where it came out. (Top). Then the wire comes out at the bottom of the torus, which is 180 degrees from the start of the wire. Then the wire goes back in the center 90 degrees from the bottom, so we are now 270 degrees from where we started. Then back around and out the top to make our 360 degree's all the way around the torus to the start of the wire. So you can see, instead of making it one time around the torus, it goes two times around the torus.
In this 36x18 there are now 12 wires as there are six NVC's. There are two wires and a gap space within each solid color. The colors correspond like this:
Page 12
In this diagram. You can see the white nested vortices are the same spacing from the center. The arrows are the emanations activating the numbers. As you can see the light blue and dark blue are activated at the same time. If you look at the math, the nested vortices highlighted in white are activated at the same time. With this said you don’t need to change anything on your activation circuit. You can just parallel the NVC one and four wires L1 and L7. You also parallel NVC one and four wires L2 and L8. That means the NVC that are 90 degrees apart are activated st the same time.
Page 13
1 Start Cycle N
VC one &
four2 Start C
ycle NVC
two&
five3Start C
ycle NVC
three & six
1Light Red NVC one and four , L1, L7 paralleled A
Gap Space BDark Red NVC one and four , L2, L8 paralleled C
2Light Green NVC two and five , L3, L9 paralleled A
Gap Space BDark Green NVC two and five , L4, L10 paralleled C
3Light Blue NVC three and six , L5, L11 paralleled A
Gap Space B > > >
Dark Blue NVC three and six , L6, L12 paralleled C > > >
A B C A B C A B C A B C A B C A B C A B CA B C A B C A B C A B C A B C A B C A B C
A B C A B C A B C A B C A B C A B C A B C
The wires and sequence will be like this:
Page 14
This is a schematic for the 9x9 ABHA torus. This is a circuit I came up with using a 74LS175 IC for the 3 stages A, B,C. The center tap transformer and diodes create the positive half wave and the negative half wave, as well as the 180 degree phased shift. There are 4 Mosfets to control the energizing sequence. The Mosfets are connected so they are 120 degrees out of phase with the other coils. You can also use a microprocessor to control the 3 stages. The LED's are for visual use only.
Thanks to YouTube member rave154 for all the testing research discussion.
Page 15This is the 36x18 schematic. It is the same schematic but with the other coils that make up the 36x18. Here I have the coils paralleled and I feel that this is the way to do it, but you can also series the coils for more resistance and less amperage.
Thanks to YouTube member rave154 for all the testing research discussion.
Page 16
With all of this said. I would like to let you know my thoughts on this document. When energizing the coil I think that everything needs to be perfect to get good results. Make sure all wires are identical. I believe that if one wire Is longer than the other it will have a great effect on the energizing time. I remember reading a Tesla patent that was talking about the wire length playing a roll on the device working correct. It’s all about resonance. So if the connections and wires are not all the same maybe down to the 1/16” of an inch might play a role to not working correctly. The phasing needs to be timed with the wave cycle. So the coil is energizing when the start of the wave form is starting and when it ends then switch the coil energized and so on. Everything needs to be tried. This document was created to try to get as close to the math as possible.
Another thing we need to take in to consecration is that this document was talking about a one layer coil. I just discovered for myself that there are 3 plains and each plain has a map. Greg Volk and Marko Rodin is working on this now. That is what I will be working on next. This should be interesting.
Please feel free to contact me and let me now your thoughts and ideas. Also if you need help I will be glad to help if I can.
Thanks! ~Russ 9-30-10
I will be creating a PDF document of any one that’s want to give my any schematics and program code that you have developed. So anyone that wants to add to the file can just send me what they have tried how they energized the coil and there results. Anything and everything can be added to the file. Just email me all data and I will add it then post an updated file for download. Basically what I want to do is collect all data and store it in one place so anyone that would like to see the tests that other people have tried can just check out the PDF. You will have your own section in the PDF and I will just add anything you send me to your section. One thing I do ask is that you send any photos (coils and circuits), all schematics, all data in detail and I will add the info. I will not change it in anyway. So be sure to make it with good details. Anything and everything goes as long as it pertains to VBM. I hope to make it the most compiled data of Rodin coils and tests/ideas for all to see in one PDF. Thank you! ~Russ
The testing data can be found here: http://www.ringsbyruss.com/testdata/Rodin_coil_testing_data_compiled.pdf
Contact me: [email protected]
