zenithinteriors.com

MELBOURNE SYDNEY CANBERRA BRISBANE PERTH ADELAIDE AUCKLAND WELLINGTON SHANGHAI HONG KONG

www.zenithinteriors.com

MELBOURNE SYDNEY CANBERRA BRISBANE PERTH ADELAIDE AUCKLAND WELLINGTON SHANGHAI HONG KONG

Rumba

MELBOURNE SYDNEY CANBERRA BRISBANE PERTH ADELAIDE AUCKLAND WELLINGTON SHANGHAI HONG KONG

www.zenithinteriors.com

Rumba Rumba employs a clean, simple design language, creating a strong, bold style, further underlined by its firmly grounded stance.

Rumba woRkstationFeatuRes Rumba exhibits exceptional stability, rigidity, and strength in both screens and table tops, even when the table top is at maximum height.Rumba leads its class in visual resolution, right down to concealing fasteners wherever possible, or hiding the workstation mechanisms from the user – even when the user is under the desk!The end user has been paramount in the design process, exemplified in height adjustment of 610-900mm (standard workstation) and 700mm-1100mm (sit-stand workstation), and a class leading maximum leg space on a 120° desk.Rumba is compatible with our complete range of screens, in almost any configuration imaginable, yet achieves this with a minimal kit of parts, meaning that future changes to an office layout are hassle free.

FinishesAccessories: Dulux standard colours (custom colours upon request)Tops: Laminate, Veneer (specials upon request) Frames: Dulux standard colours (custom colours upon request)S30 / S50 / S70 Screen Finish: Echo Panel, Fabric, Forbo Pinboard, Glass, Laminate, Perforated Metal, Plain Metal, Twin Wall Polycarbonate, Veneer, Whiteboard.

ceRtiFications

designZenith Design Studio

MELBOURNE SYDNEY CANBERRA BRISBANE PERTH ADELAIDE AUCKLAND WELLINGTON SHANGHAI HONG KONG

www.zenithinteriors.com

Rumba Fixed height woRkstationdesk layouts

Rumba Workstation 180 degree

Standard Run of 2 Run of 3

Run of 4

Run of 5

Run of 6

Pod of 2 Pod of 4 Pod of 6

Pod of 8

Pod of 10

Pod of 12

Rumba Workstation 90 degree

Pod of 2 T Shape Pod of 4 X Shape

2 End Left Hand 2 End Right Hand

Rumba Workstation 120 degree

Standard Pod of 3 Pod of 6

Pod of 9

Pod of 2 Y Shape

Pod of 3 Hex Post Pod of 6 Hex Post Pod of 9 Hex PostType 2 Type 2 Type 2

MELBOURNE SYDNEY CANBERRA BRISBANE PERTH ADELAIDE AUCKLAND WELLINGTON SHANGHAI HONG KONG

www.zenithinteriors.com

Rumba technician / windeR adjust woRkstationdesk layouts

Rumba Workstation 180 degree

Standard Run of 2 Run of 3

Run of 4

Run of 5

Run of 6

Pod of 2 Pod of 4 Pod of 6

Pod of 8

Pod of 10

Pod of 12

Rumba Workstation 90 degree

Pod of 2 T Shape Pod of 4 X Shape

2 End Left Hand 2 End Right Hand

Rumba Workstation 120 degree

Standard Pod of 3 Pod of 6

Pod of 9

Pod of 2 Y Shape

Pod of 3 Hex Post Pod of 6 Hex Post Pod of 9 Hex PostType 2 Type 2 Type 2

MELBOURNE SYDNEY CANBERRA BRISBANE PERTH ADELAIDE AUCKLAND WELLINGTON SHANGHAI HONG KONG

www.zenithinteriors.com

Rumba woRkstationleg styles

height Range

Standard Sit/Stand Screen to Ground

610

900700

1100

Scren Suspended Screen on Cross Beam

Single Leg Double Leg Single Leg with Foot

Double Leg with Foot Corner Leg

MELBOURNE SYDNEY CANBERRA BRISBANE PERTH ADELAIDE AUCKLAND WELLINGTON SHANGHAI HONG KONG

www.zenithinteriors.com

Rumba woRkstationcaRe & maintenance FabRicGently spot clean excess liquid from the fabric surface. Do not saturate or scrub the fabric with water or cleaning liquids. Every fabric composition varies and the individual fabric supplier should be contacted for further fabric care instructions.echo Panel Remove dust and marks with a soft damp cloth and mild solutions of warm water and upholstery shampoo. Blot dry with a solution free soft damp cloth. FoRbo PinboaRd Clean with a damp cloth or if necessary, with a brush using a neutral detergent. Rinse with clean water. The pinboard material is resistant to diluted acids, oils and most conventional solvents such as alcohol, white spirit. laminateFor general cleaning use a soft clean cloth and a mild detergent in warm water. Wipe the surface gently to remove dust or marks. Always rinse after cleaning with fresh water to remove any remaining detergent. For heavier stains use a non-abrasive cleaner. Excessive scrubbing may damage the decorative surface, particularly a gloss finish.metal For general cleaning use a soft clean cloth and a mild detergent in warm water. Wipe the surface gently to remove dust or marks. Always rinse after cleaning with fresh water to remove any remaining detergent. PowdeR coatRemove loose deposits with a wet sponge (avoid scratching the surface by dry dusting). Use a soft clean cloth and mild detergent in warm water. Wipe the powdercoating to remove dust, salt or other deposits. Always rinse after cleaning with fresh water to remove any remaining detergent. In some cases, strong solvents recommended for thinning various types of paints and also for cleaning up are harmful to the extended life of the powder coated surface. These solvents should not be used for cleaning purposes. VeneeRDust and wipe down the veneer surface regularly with a slightly damp soft cloth. Furniture polish recommended for the appropriate wood finish will remove soil and dust and provide a protective coating to guard against future spills. Polishing more than 3-4 times per year will see a buildup of cloudy film. Water or liquid spills should be wiped up immediately and avoid placing hot items directly on the veneer surface. twin wall PolycaRbonateMild soapy water and a soft clean cloth will sufficiently remove stubborn stains or markings. Make sure the detergent contains no abrasives or solvents. Pre wash with warm water and gently rub stains. Rinse with water to remove excess residue. whiteboaRd Use a whiteboard duster for general erasing. For tough marks (ghosting) use a professional whiteboard cleaner and wipe with soap, water and a clean cloth afterwards. To prevent ghosting, the ink should be completely dry before erasing. Excessive smearing and smudging can occur if wet ink is attempted to be erased.