Upload
hoanganh
View
215
Download
1
Embed Size (px)
Citation preview
Please read these instructions carefully before using this product, and save this manual for future use.
Rugged Tablet PC M101B-Series Windows 10 IoT Enterprise Windows Embedded 8.1 Industry Pro Windows 7 Professional for Embedded System
OS Installation Guide
Version 1.2 Release date: 13-Jan-2017
M101B Series OS Installation Guide
i
Document Revision History
Version Date Note Author
1.0 11-Jul-2016 Initial release Karen Liu
1.1 23-May-2016 Add Winmate SDK Support Karen Liu
1.2 13-Jan-2017 Add how to change touch keyboard size
Karen Liu
ii
CONTENTS INTRODUCTION 3
BIOS SETUP 4
BIOS Navigation Keys 4
Changing BIOS Settings (UEFI/LEGACY) to Install OS 6
Default Windows 8/8.1 change to Windows 7 6
Default Windows 7 change to Windows 8.1 9
BIOS and EC Firmware Update Guide 12
Tools needed 12
Where to Download BIOS Update Files 12
Preparing USB Drive with BIOS/EC FW Update Files 13
Update/Flash BIOS and EC in UEFI Shell Mode 16
SETTING UP OS FIRST TIME 22
Windows 10 IoT Enterprise 22
DRIVER INSTALLATION 29
Windows 10 IoT Enterprise 29
Windows Embedded 8.1 Industry Pro 30
Windows 7 Professional for Embedded System 31
UTILITY INSTALLATION 32
List of Winmate AP/ Utilities 32
Hot Tab Driver Installation Guide 33
Adjusting COM Port Settings 36
COM Port Settings 36
Adjusting COM Port Number 37
Setting Up Bluetooth COM Port 39
Changing Touch Keyboard Size 41
WINMATE SDK SUPPORT 43
Winmate Download Center 43
Download SDK from Winmate File Share 43
M101B Series OS Installation Guide
3
INTRODUCTION This document contains references and instructions on operation system and
utility installation. M101B-seriees Rugged Tablet PC is shipped with pre-
installed OS based on your order. This guide also describes the procedure
how to update BIOS or change BIOS settings to install the OS different from
Winmate shipment.
For Standard installation Windows OS installation, you can use
Winmate’s Recovery CD/ DVD or use Recovery Partition and follow
procedures described in the M101B-Series User Manual.
For alternative way, if customer installs OS from Microsoft CD/ DVD; this
document explains some key important information (especially for
Consumer, Non-Embedded OS).
4
BIOS SETUP There are two ways to install new OS: either through BIOS settings (UEFI /
LEGACY mode) or to update BIOS version.
IMPORTANT:
Chose only one BIOS Setup method for OS Update: either change BIOS Settings (UEFI/LEGACY mode) or update BIOS version. The choice depends on your preferences.
BIOS Navigation Keys
This section describes the procedure to enter BIOS settings and introduces
BIOS navigation keys. To enter the BIOS setup, you need to connect an
external USB keyboard, press Del key when the prompt appears on the
screen during start up. The prompt screen shows only few seconds so need
press Del key quickly.
BIOS Navigation Keys
The following keys are enabled during POST:
Key Function
Del Enters the BIOS setup menu.
F7 Display the boot menu. Lists all bootable devices that are connected to the system. With cursor ↑and cursor ↓and by pressing <ENTER>, select the device used for the boot.
Pause Pressing the [Pause] key stops the POST. Press any other key to resume the POST.
M101B Series OS Installation Guide
5
The following Keys can be used after entering the BIOS Setup.
Key Function
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
Esc Exit
+/- Change Opt.
Enter Select or execute command
Cursor ↑ Moves to the previous item
Cursor ↓ Goes to the next item
Cursor ← Moves to the previous item
Cursor → Goes to the next item
6
Changing BIOS Settings (UEFI/LEGACY) to Install OS
This section describes how to change UEFI/LEGACY mode in BIOS settings
to install OS that is different from Winmate shipping.
Default Windows 8/8.1 change to Windows 7
The instruction below describes how to change Windows 8/8.1 to Windows 7.
1. Enter BIOS Setup utility.
2. Go to “Miscellaneous Configuration” at BIOS setup menu.
M101B Series OS Installation Guide
7
3. Change OS setting to Windows 7.
4. Go to CSM Configuration, change Storage and Video to Legacy only.
M101B Series OS Installation Guide
9
Default Windows 7 change to Windows 8.1
1. Enter BIOS Setup menu.
2. Go into item “Miscellaneous Configuration” at BIOS setup menu.
3. Change OS setting to Windows 8.X.
M101B Series OS Installation Guide
11
5. Go to Boot Page and in the Boot Mode setting select to UEFI.
6. Now you can put your install device to Boot Option #1 then you will start
install process.
IMPORTANT:
Pay attention to the mode you created on the Recovery DVD. PE3.0 only support legacy mode for Windows 7, PE5.0 can support Win7/8/8.1 at legacy or UEFI mode. Creation and installion processes of the choosen mode must match.
12
BIOS and EC Firmware Update Guide
This section contains the procedures required to perform updates to BIOS and
EC firmware. The update procedures require user to prepare USB drive
containing BIOS/EC update files first, and then boot the computer to BIOS
UEFI Shell Mode, and perform BIOS and EC firmware update using the
update script file prepared on the USB drive.
Tools needed
1. Tablet PC to be updated
2. One empty USB drive
3. Winmate BIOS Update files
4. USB hub powered with an external AC adapter (Note: if the USB Hub
is not externally AC
powered, the BIOS and EC firmware update run the risk of being
corrupted.)
5. USB keyboard
6. Another Windows PC to prepare update USB drive
Where to Download BIOS Update Files
Download the latest BIOS version from Winmate Download Center: Go to Go
to http://www.winmate.com/ > Support > Download Center > Vehicle Mount
Computer > FM08/ FM10 > BIOS
Download the latest BIOS version from Winmate Partner Portal:
Go to https://app.box.com/files/0/f/8013891345/BIOS
M101B Series OS Installation Guide
13
Preparing USB Drive with BIOS/EC FW Update Files
1. Plug in an empty USB drive to a PC and format it to FAT32.
Navigate on Removable Disk and right-click the mouse. In a drop-down
menu select Format.
14
Wait until the system finishes formatting removable disk.
2. Unzip files from BIOS update zipped file for UEFI, and place all files
into a folder named BIOS_Update into the USB drive.
NOTE:
The actual files listed in the screenshot below may be different. In the Compressed Folder Tools window, choose BIOS version you need and
select Extract All to extract files.
M101B Series OS Installation Guide
15
You have compressed BIOS Update file to USB drive disk.
3. The USB drive is now ready to be used to perform BIOS and EC
firmware updates.
16
Update/Flash BIOS and EC in UEFI Shell Mode
1. Prepare the Tablet PC to be updated by plugging in the AC Adapter,
USB hub, the USB drive (prepared in the previous section), and the
USB keyboard.
2. Power on the Tablet PC while pressing DEL key on the keyboard to
enter the BIOS Setup Menu.
3. Use the direction keys on the keyboard to navigate to the submenu
“Save & Exit”, and then choose “Launch EFI Shell from file system
device” by pressing Enter. Now the Tablet PC will load into UEFI Shell
mode, and user can enter the update command.
M101B Series OS Installation Guide
17
4. When the Tablet PC goes into the UEFI Shell mode, it will automatically
load and show on the screen the USB devices connected to the Tablet
PC, you will see a list of USB devices, and their designation.
5. From the list of USB devices, find the device shown as Removable
Hard Disk, and identify its designation (i.e. “fs4”). Please note this
designation may be different from the user’s own session, so please
take note and identify it as it will be used as a command.
NOTE:
If Removable Hard Disk is not shown as a loaded device on screen, please restart the Tablet PC and start from Step 2 of this guide.
18
6. Enter the Removable Hard Disk’s designation (i.e. “fs4”) into the command prompt, and follow by a colon sign (“:”), and press Enter, to browse into the update USB drive. The full command shall be as shown below.
7. Once in the USB drive’s directory, enter the command “cd
BIOS_Update” to browse into the folder with update files.
8. Once in the BIOS_Update directory, enter command “update” to start the script to run the BIOS update procedure.
9. The update script will scan through the BIOS on the tablet and replace it
with a new BIOS. The user will see block of data being programmed with
percentages.
M101B Series OS Installation Guide
19
CAUTION
Do not unplug the AC Adapter, the update USB, or shutdown the
Tablet PC during this update, as it may cause permanent damage
to the Tablet PC that may require substantial hardware repair.
10. Once the BIOS update is complete, FPT Operation Passed message
will appear on the screen, and the update script will automatically bring
up the EC firmware update program. You will need to enter “Y” on the
keyboard to initiate the EC firmware update.
20
11. Once the EC firmware update starts, percentage of current progress will
be shown. At the end of the EC firmware update procedure, you should
see the percentage completed at 100%. The Tablet PC will restart
automatically at completion.
CAUTION
Do not unplug the AC Adapter, the update USB, or shutdown the
Tablet PC during this update, as it may cause permanent damage
to the Tablet PC that may require substantial hardware repair.
12. To ensure the BIOS and EC firmware updates are applied successfully,
please restart the Tablet PC and press the DEL on the keyboard while
the tablet is starting up, to boot into BIOS Setup Menu.
M101B Series OS Installation Guide
21
13. In the BIOS Setup Menu, check the “Main” tab. You can confirm that
updates for Project Version and the EC Version were successfully
applied.
22
SETTING UP OS FIRST TIME This section explains how to install OS for the first time. You will find guideline
for Windows 10 IoT Enterprise as an example. For other OS, follow on-screen
instructions from Microsoft.
Windows 10 IoT Enterprise
Follow the steps below to complete the setup process.
1. Press the power button to turn on the computer.
2. First, select your country/region, your preferred app language, your
preferred keyboard layout, and your time zone, and then click Next.
3. In the opened window, click Install now.
M101B Series OS Installation Guide
23
4. Enter the product key to activate Windows, click Next.
5. Microsoft license will appear. Carefully read the terms of license, select “I
accept the license terms”, then click Next.
24
6. Select the type of installation you want. We recommend you to choose
custom. Click Custom to continue.
7. Choose the place where to install Windows, then click Next.
M101B Series OS Installation Guide
25
8. Windows setup window will pop-up. Windows might create additional
partitions for you system files. Click Ok.
9. Windows have created partition 2. Click Next to continue.
26
10. Windows setup warning message pops-up, read it carefully, and then
click Cancel. Click Next to continue.
11. Installing Windows. Please wait.
M101B Series OS Installation Guide
27
12. Now you are ready to Setup your system. Click Use Express settings.
13. Read any introductory screens describing features of your computer,
and click Next upon completing each. You are now done with the initial
setup process.
M101B Series OS Installation Guide
29
DRIVER INSTALLATION This section contains the path to download drivers for Windows 10 IoT
Enterprise, Windows Embedded 8.1 Industry Pro and Windows 7 Professional
for Embedded System. Install the drivers in the sequence listed below.
Windows 10 IoT Enterprise
Download drivers from Winmate Download Center:
Go to http://www.winmate.com/ > Support > Download Center > Rugged
Tablet PCs >
M101B /BL/BT > Driver > Win 10 IoT Driver
Download drivers from Winmate Partner Portal:
https://app.box.com/files/0/f/6014373665/Driver > Win 10 IoT
Driver Installation Sequence:
1. Chipset
2. Graphics
3. MBI
4. PV_Bay Trial_MD Intel_TXE FW
5. TXE
6. Audio
7. GPS
8. Wi-Fi & BT
9. WWAN
After completing the OS driver installation, you can install drivers for Utilities
30
Windows Embedded 8.1 Industry Pro
Download drivers from Winmate Download Center:
Go to http://www.winmate.com/ > Support > Download Center > Rugged
Tablet PCs >
M101B /BL/BT > Driver > Win 8.1 Driver
Download drivers from Winmate Partner Portal:
https://app.box.com/files/0/f/6014373665/Driver > Win 8.1 Driver
Driver Installation Sequence:
1. Chipset
2. Graphic
3. TXE
4. Audio
5. LAN
6. GPS
7. Wi-Fi - BT
8. MBI
9. Docking
10. Others
a. Hot Tab Driver
b. WWAN 3G Huawei
c. WWAN LTE Sierra
d. BR Intermec Easyset
e. UHF Thing Magic
After completing the OS driver installation, you can install drivers for Utilities
M101B Series OS Installation Guide
31
Windows 7 Professional for Embedded System
Download drivers from Winmate Download Center:
Go to http://www.winmate.com/ > Support > Download Center Rugged Tablet
PCs >
M101B /BL/BT > Driver > Win 7 Driver
Download drivers from Winmate Partner Portal:
https://app.box.com/files/0/f/6014373665/Driver > Win 7 Driver
Driver Installation Sequence:
1. Chipset
2. Graphic
3. TXE
4. Audio
5. LAN
6. GPS
7. Wi-Fi & BT
8. Sensor Hub
9. Docking
10. USB 3.0
11. Others
a. Hot Tab Driver
b. WWAN 3G Huawei
c. WWAN LTE Sierra
d. BR Intermec Easyset
e. UHF Thing Magic
After completing the OS driver installation, you can install drivers for Utilities
32
UTILITY INSTALLATION This section contains Winmate AP/Utility download path, the list of items
provided for M101B-Series Rugged Tablet PC by Winmate and Hot Tab driver
installation.
List of Winmate AP/ Utilities
You can download Winmate AP/ Utility from Winmate Download Center. Go to http://www.winmate.com/ > Support > Download Center > Rugged Tablet PCs > M101B/ BL/ BT> Utility List of Winmate AP/ Utilities for M101B-Series Rugged Tablet PC
Item Type Description
1 Utility M101B-Series Hot Tab
*Refer to utility User Manual for detailed AP/Utility installation instructions. M101B-Series Rugged Tablet PC Hot Tab Version
Hot Tab Version
HW Trigger (default) A40.1.56
SW Trigger (optional) A40.3.56
M101B Series OS Installation Guide
33
Hot Tab Driver Installation Guide
This section contains Hot Tab installation guide. *Hot Tab Driver is suitable for the following OS: Windows 7, Windows 8.1 and Windows 10 IoT. Hot Tab Driver Installation steps:
1. Uninstall the old version.
Before you start the new signature Hot Tab driver installation, please remove the old Hot Tab Port IO driver in Windows’s Device Manager.
Select “PortIO Driver” under System devices and right-click on it. In the drop-down menu select Uninstall to remove the driver.
\
34
Click OK to confirm device uninstall.
2. Install the new driver.
i. Type “cmd” in the run box. ii. The cmd.exe will appear in Programs iii. Right click on the cmd.exe and click on “Run as administrator” to start
command prompt.
M101B Series OS Installation Guide
35
iv. Change directory to driver’s location, and type install to install the driver
v. When Windows Security dialog appear, select install to continue the
installation.
When the driver is successfully installed, you can see “Drivers Updated successfully” message in the dos prompt. “WMMIO” device also have been added to the Device Manger under “System devices”.
36
Adjusting COM Port Settings
This section explains how to adjust serial COM port settings. In order for
Winmate’s Hot-Tab software to communicate with & control the certain
devices (for example, RFID, UHF, Barcode Reader), you require to assign the
fixed COM port number for the devices.
NOTE: After installing Winmate AP / Utility you may require to adjust serial COM port settings to match with Winmate AP settings.
COM Port Settings
Serial COM Port Settings
Serial Port Number Device
COM 1 RS232 at I/O
COM 2 RS232 of Expansion Port (optional)
COM 3 HF RFID (optional)
COM 4 Bluetooth Auto Pairing
COM 9 GPS
COM 12 RS232 at Docking (optional)
COM4 > COM 15 Barcode Reader (optional)
COM 20 UHF RFID (optional)
Refer to the section “Adjusting Com Port Number” in this installation guide to
set up COM port number.
M101B Series OS Installation Guide
37
Adjusting COM Port Number
1. Go to the Device Manager > Expand the Ports (COM& LPT). Right-click on the device and click on ‘Properties’.
2. In the Ports Settings tab, click Advanced.
38
3. Specify the COM Port Number. Change COM port number from
COM4 to COM15. Click OK.
4. Check the device management that has been changed COM15, and
then restart your device.
NOTE:
For UHF module Micro needs to be set COM20 for Hot Tab.
M101B Series OS Installation Guide
39
Setting Up Bluetooth COM Port
Instruction:
1. Open the Bluetooth Devices Control Panel.
2. In the Options tab, select Turn discovery on and allow Bluetooth
devices to connect to this computer.
3. In the COM Ports tab, click Add.
40
4. Select Incoming (device initiates the connection) and click OK.
NOTE: The COM port number you just added would be auto paired when the Bluetooth Barcode scanner scans the barcode sticks on the tablet PC.
5. Click OK to close the Bluetooth Devices Control Panel.
M101B Series OS Installation Guide
41
Changing Touch Keyboard Size
The device is shipped with the Touch Keyboard size “6”.
To change the size of a touch keyboard:
1. Download touch size.zip file from Winmate File Share.
https://winmate.box.com/v/Touch-Keyboard-Size
2. Unzip Touch size.zip file to the FM10 desktop with “Touch Keyboard
size.reg”. Modify the Touch Keyboard size.reg
3. Set the number to adjust touch keyboard size. The minimum number you
can set is “6”.
IMPORTANT:
The “Monitor Size” does not mean the actual screen size.
The bigger the number, the smaller the Touch Keyboard will be.
The smaller the number, the bigger the Touch Keyboard will be.
4. Restart computer to implement changes.
M101B Series OS Installation Guide
43
WINMATE SDK SUPPORT Winmate provides Software Development Kit (SDK) for M101B-Series Rugged
Tablet PC.
Winmate Download Center
Go to http://www.winmate.com/ > Support > Download Center > Rugged
Tablet PCs > M101B/BL/BT > Development Kit
Download SDK from Winmate File Share
https://app.box.com/files/0/f/7233497641/SDK
Winmate Inc. 9F, No.111-6,Shing-De Rd., San-Chung Dist., New Taipei City 24158, Taiwan, R.O.C
Tel: 886-2-8511-0288 Fax: 886-2-8511-0211 Email: [email protected] Official website: http://www.winmate.com