RUD lifting means 2014
Product details
Vario-Starpoint VRS-F-M36 with star key
Star shaped design, a clear distinction from the DIN
580 eye bolt. With a striking fluorescent pink powder
coating.
Identification: Clear WLL indication for the most
unfavorable load direction F (not permissible for DIN
580).
Forged material 1.6541, high tensile and annealed,
100% electromagnetic crack detected according to
EN 1677-1 and with a 4 :1 design factor.
Choose the attachment point in such a way that the
introduced forces are accomodated by the work
piece without being deformed. Make sure the
bolting surface is plain. Ensure an appropriate bore
depth to facilitate an optimal sitting of the engaging
surface.
Work piece material, at least 1.0037 (St 37).
For light metals, nonferrous heavy metals and grey
cast iron, the thread type allocation must be done in
such a way that, the WLL of the thread type fulfils
the requirements of the respective work piece.
Without an additional washer, screw the VRS into
the work piece until the seat - engaging surface of
the Hexagon socket bolt evenly lies on the surface
of the work piece. If the VRS permanently to remain
at the point of force introduction, it must be
tightened with a torque of 590 Nm.
The thread bore countersink is equal to the effective
diameter of the thread. Always pay attention that the
Hexagon socket bolt is tightened.
When impact loaded or operated in environments
with skewing and vibrations, unintentional loosening
can happen, especially if through bolts with nuts
are used.
Securing possibilities: Use of a liquid thread
securing medium eg. Loctite ( follow the
manufacturers recomendations)
In a tightened condition, the VRS must be able to
swivel up to 360.
Before loading, adjust the VRS to the direction of
