THE ACADEMY FOR MANUFACTURING CAREERSJANUARY 2017

REGISTRATION OPENS NOVEMBER 21, 201 6 REGISTRATION DEADLINE DECEMBER 16, 201 6 @ 4:00PM

A $50 late registration fee will be charged if you register for or change classes after the registration deadline.

Drop Policy: You will receive a 100% refund for any class you drop on or before the last day of the registration period for the term. If you DROP after the last day of the registration period you will be responsible for 50% of the class fees. A student should not simply stop attending a class; they need to notify The Academy immediately. Failure to notify the Academy may result in you receiving a 0 or F for the class and the student will also still be responsible for full payment of the class.

Checks should be made payable to The Academy for Manufacturing Careers. JAMA Members - will be invoiced for full amount. Non-Member Companies – ½ due at registration with remainder due before start of class. Individuals - $100.00 at registration, ½ of remaining fee before start of class, remainder due at mid-term. If you are a self- pay student you can get the member rate if balance is paid in full before class starts. We accept, Visa and Mastercard credit cards.

To REGISTER: Complete the attached registration form and return to:Mail: The Academy for Manufacturing Careers

2545 Spring Arbor Road, Suite 201, Jackson, MI 49203Phone: 517-782-8268 Fax: 517-435-4126

E-mail: osteele@mijama.org

September 2015

CLASS NAME AMC Placement Basic Computers Test-Out Basic Gauges & Measurement Test-Out

PRE-REQUISITE None None None

DESCRIPTION This assessment is required to make a determination on whether you are placed in Basic Math or Algebra.

This opportunity is being provided for anyone who would like to test out of the Basic Computers class. You must complete and pass an online computer test that includes Word, PowerPoint and Excel.

Test covers basic functions in Word, Excel and PowerPoint.

This opportunity is being provided for anyone who would like to test out of the Basic Gauges & Measurement Class. You must complete and pass BOTH written and hands-on practical testing.

Test covers the proper naming, use, and calibration of measuring instruments found within a manufacturing environment. Instruments covered include but are not limited to calipers, micrometers, sine bars, and gauges in both inch and metric units.

COURSE ID # AMC 700 AMC 161 AMC 650DATES Dec. 20 Dec. 20 Dec. 20

DAYS Tuesday Tuesday Tuesday

TIMES 5:00pm-8:00pm 5:00pm-8:00pm 5:00pm-8:00pm

LOCATION JACC-Tech Lab/East6800 Browns Lake RdJackson, MI 49201

JACC-Tech Lab/East6800 Browns Lake RdJackson, MI 49201

JACC-Tech Lab/East6800 Browns Lake RdJackson, MI 49201

JAMA RATE $150 $150 $150

NON-MEMBER $150 $150 $150

THE ACADEMY FOR MANUFACTURING CAREERSJANUARY 2017

REGISTRATION OPENS NOVEMBER 21, 201 6 REGISTRATION DEADLINE DECEMBER 16, 201 6 @ 4:00PM

A $50 late registration fee will be charged if you register for or change classes after the registration deadline.

Drop Policy: You will receive a 100% refund for any class you drop on or before the last day of the registration period for the term. If you DROP after the last day of the registration period you will be responsible for 50% of the class fees. A student should not simply stop attending a class; they need to notify The Academy immediately. Failure to notify the Academy may result in you receiving a 0 or F for the class and the student will also still be responsible for full payment of the class.

Checks should be made payable to The Academy for Manufacturing Careers. JAMA Members - will be invoiced for full amount. Non-Member Companies – ½ due at registration with remainder due before start of class. Individuals - $100.00 at registration, ½ of remaining fee before start of class, remainder due at mid-term. If you are a self- pay student you can get the member rate if balance is paid in full before class starts. We accept, Visa and Mastercard credit cards.

To REGISTER: Complete the attached registration form and return to:Mail: The Academy for Manufacturing Careers

2545 Spring Arbor Road, Suite 201, Jackson, MI 49203Phone: 517-782-8268 Fax: 517-435-4126

E-mail: osteele@mijama.org

September 2015

CLASS NAME Intro. to CAD Algebra Problem SolvingPRE-REQUISITE None Basic Math NoneDESCRIPTION Introduces students to the

use of the computer in the creation of drawings in place of traditional drafting methods. Students will create and edit drawings using the computer and AutoCAD software.

Students will work with handbook formulas as well as computations required for practical application. Students will develop the ability to evaluate expressions and to express word statements as an algebraic problem.

This class will introduce participants to the problem solving basics and G8-D reporting methods. It covers the reasons for gathering data when you need to analyze a problem and introduces students to some of the basic tools of problem solving and how these tools are used. Tools covered will include cause & effect (fishbone) diagrams, SPC control charts, 5-why methods, brainstorming and scatter diagrams.

COURSE ID # AMC 105 AMC 113 AMC 145DATES Jan. 9,11,16,18,23,25,30

Feb. 1,6,8,13,15,20,22,27Mar 1

Jan. 12,19,26Feb. 2,9,16Mar. 2,9No Class Feb 23.

Students will sign up for ONE of the following sessions:

DAYS Mondays & Wednesdays Thursdays Wednesday, December 21OR

Thursday, December 22TIMES 5:00pm-8:00pm 6:00pm-10:00pm 8:00am-4:30pm

OR1:00pm-8:00pm

LOCATION JACC-Tech Lab/East6800 Browns Lake RdJackson, MI 49201

JACC-Construction6800 Browns Lake RdJackson, MI 49201

JACC-Manufacturing Lab6800 Browns Lake RdJackson, MI 49201

JAMA RATE $660 $625 $385

NON-MEMBER $760 $725 $485

THE ACADEMY FOR MANUFACTURING CAREERSJANUARY 2017

REGISTRATION OPENS NOVEMBER 21, 201 6 REGISTRATION DEADLINE DECEMBER 16, 201 6 @ 4:00PM

A $50 late registration fee will be charged if you register for or change classes after the registration deadline.

Drop Policy: You will receive a 100% refund for any class you drop on or before the last day of the registration period for the term. If you DROP after the last day of the registration period you will be responsible for 50% of the class fees. A student should not simply stop attending a class; they need to notify The Academy immediately. Failure to notify the Academy may result in you receiving a 0 or F for the class and the student will also still be responsible for full payment of the class.

Checks should be made payable to The Academy for Manufacturing Careers. JAMA Members - will be invoiced for full amount. Non-Member Companies – ½ due at registration with remainder due before start of class. Individuals - $100.00 at registration, ½ of remaining fee before start of class, remainder due at mid-term. If you are a self- pay student you can get the member rate if balance is paid in full before class starts. We accept, Visa and Mastercard credit cards.

To REGISTER: Complete the attached registration form and return to:Mail: The Academy for Manufacturing Careers

2545 Spring Arbor Road, Suite 201, Jackson, MI 49203Phone: 517-782-8268 Fax: 517-435-4126

E-mail: osteele@mijama.org

September 2015

CLASS NAME Materials & Metallurgy Intro to Lean Theory Basic ComputersPRE-REQUISITE None None NoneDESCRIPTION This course will provide

the student with a working knowledge of the properties, uses, and treatment methods used to alter the properties of commonly used metals and alloys. This knowledge may be applied to the design, selection, processing and testing of metal parts.

The various tools such as: Takt time, Pitch Supermarkets, Line Balancing, 5S, Total Productive Maintenance, Standardized Work, Heijunka – Level Loading and others will be explained and demonstrated in various simulations. Case studies will also be analyzed.

This class will provide students with hands-on experience in the basics of computer concepts ranging from Windows 7 to Microsoft Office, Excel, PowerPoint and Outlook.

COURSE ID # AMC 135 AMC 150 AMC 160DATES Jan. 10,17,24,31

Feb. 7,14,21,28Jan. 10,12,17,19,24,26,31Feb. 2,7,9,14,16,21,28Mar 2No Class Feb 23.

Jan. 10,17,24,31Feb. 7,14,21,28

DAYS Tuesdays Tuesdays & Thursdays Tuesdays

TIMES 5:00pm-9:00pm 6:00pm-9:00pm 5:00pm-9:00pm

LOCATION JACC-Construction6800 Browns Lake RdJackson, MI 49201

JACC-Manufacturing Lab6800 Browns Lake RdJackson, MI 49201

JACC-Tech Lab/East6800 Browns Lake RdJackson, MI 49201

JAMA RATE $620 $795 $555

NON-MEMBER $720 $895 $655

THE ACADEMY FOR MANUFACTURING CAREERSJANUARY 2017

REGISTRATION OPENS NOVEMBER 21, 201 6 REGISTRATION DEADLINE DECEMBER 16, 201 6 @ 4:00PM

CLASS NAME Intermediate Blueprint Reading/GD&T

Trigonometry Industrial Hydraulics & Pneumatics

Machine Maintenance & Troubleshooting

PRE-REQUISITE

Industrial Blueprint Reading

Algebra None None

DESCRIPTION

Geometric Dimensioning and Tolerancing covers the fundamentals of GD&T concepts, and teaches how to read and interpret prints with GD&T symbols. Content is based upon ANSI/ASME Y 14.5M-2009 standards.

Students will learn to express decimal degrees as degrees, minutes and seconds. Complete unknown angles and side of similar triangles. Use geometric principles to solve problems of internally and externally tangent circles.

This course provides instruction in the basics of hydraulic and pneumatic systems including pumps, valving, control assemblies, and actuators. Provides a general understanding of basic laws and formulas used in simple hydraulic circuits, including standard hydraulic symbols, and maintenance procedures.

This course covers methods and means used to troubleshoot and maintain machines typically found in a manufacturing environment. Problem symptoms, problem identification, maintenance records and systems will be covered.

COURSE ID # AMC 200 AMC 208 AMC 220 AMC 260DATES Jan 12,19,26

Feb. 2,9,16Mar 2,9No Class on Feb 23

Jan. 11,18,25Feb. 1,8,15,22Mar. 1

Jan. 9,11,16,18,23,25,30Feb. 1,6,8,13,15,20,22,27Mar. 1

Jan. 10,12,17,19,24,26,31Feb. 2,7,9,14,16,21,28Mar. 2No Class on Feb 23

DAYS Thursdays Wednesdays Mondays & Wednesdays Tuesdays & Thursdays

TIMES 5:00pm-9:00pm 5:00pm-9:00pm 5:00pm-9:00pm 5:00pm-8:00pm

LOCATION JACC-Ag. Science6800 Browns Lake RdJackson, MI 49201

JACC-Construction6800 Browns Lake RdJackson, MI 49201

JACC-Manufacturing Lab6800 Browns Lake RdJackson, MI 49201

JACC-Sales6800 Browns Lake RdJackson, MI 49201

JAMA RATE $565 $625 $730 $655

NON-MEMBER

$665 $725 $830 $755

A $50 late registration fee will be charged if you register for or change classes after the registration deadline.

Drop Policy: You will receive a 100% refund for any class you drop on or before the last day of the registration period for the term. If you DROP after the last day of the registration period you will be responsible for 50% of the class fees. A student should not simply stop attending a class; they need to notify The Academy immediately. Failure to notify the Academy may result in you receiving a 0 or F for the class and the student will also still be responsible for full payment of the class.

Checks should be made payable to The Academy for Manufacturing Careers. JAMA Members - will be invoiced for full amount. Non-Member Companies – ½ due at registration with remainder due before start of class. Individuals - $100.00 at registration, ½ of remaining fee before start of class, remainder due at mid-term. If you are a self- pay student you can get the member rate if balance is paid in full before class starts. We accept, Visa and Mastercard credit cards.

To REGISTER: Complete the attached registration form and return to:Mail: The Academy for Manufacturing Careers

2545 Spring Arbor Road, Suite 201, Jackson, MI 49203Phone: 517-782-8268 Fax: 517-435-4126

E-mail: osteele@mijama.org

September 2015

THE ACADEMY FOR MANUFACTURING CAREERSJANUARY 2017

REGISTRATION OPENS NOVEMBER 21, 201 6 REGISTRATION DEADLINE DECEMBER 16, 201 6 @ 4:00PM

CLASS NAME Welding II CNC Mill Theory & Programming

Basic Gauges & Measurements

Industrial Blueprint Reading

PRE-REQUISITE

None Precision Machining Methods

Industrial Blueprint Reading

None

DESCRIPTION This is a welding course in GMAW (gas metal arc welding formally known as MIG welding) and GTAW (gas tungsten arc welding formally known as TIG welding) processes and techniques. Topics will include safety, use of equipment, power sources, shielding gases, filler metals, welding techniques, troubleshooting, weld defects and welding in the flat, vertical and horizontal positions.

This course introduces the students to the theories and basic programming fundamentals of the Computerized Numerical Controlled Mill process.

Covers use of calipers, micrometers, English and metric gauges and other measuring instruments within a manufacturing environment. Topics include: English vs. metric, calibration of instruments, importance of repeatability, hands-on measurement of piecework, and instrument inspection and care.

This course will provide the student with a working knowledge and understanding of a variety of mechanical blueprints. Students will learn to recognize and identify symbols and specifications common to modern industrial blueprints. Topics will include: lines and symbols, views, form, position, title blocks, sketching, features, and sections.

COURSE ID # AMC 230 AMC 250 AMC 130 AMC 100DATES Jan. 10,12,17,19,24,26,31

Feb. 2,7,9,14,16,21,28Mar. 2No Class on Feb 23

Jan. 9,16,23,30Feb. 6,13,20,27

Jan. 11,18,25Feb. 1,8,15,22Mar. 1

Jan. 10,17,24,31Feb. 7,14,21,28

DAYS Tuesdays & Thursdays Mondays Wednesdays Tuesday

TIMES 5:00pm-9:00pm 6:00pm-10:00pm 6:00pm-10:00pm 5:00pm-9:00pm

LOCATION JACC-Welding Lab6800 Browns Lake RdJackson, MI 49201

JACC-Precision Machining6800 Browns Lake RdJackson, MI 49201

JACC-Precision Machining6800 Browns Lake RdJackson, MI 49201

JACC-Ag. Science6800 Browns Lake RdJackson, MI 49201

JAMA RATE $795 $625 $720 $565

NON-MEMBER $895 $725 $820 $665

A $50 late registration fee will be charged if you register for or change classes after the registration deadline.Drop Policy: You will receive a 100% refund for any class you drop on or before the last day of the registration period for the term. If you DROP after the last day of the registration period you will be responsible for 50% of the class fees. A student should not simply stop attending a class; they need to notify The Academy immediately. Failure to notify the Academy may result in you receiving a 0 or F for the class and the student will also still be responsible for full payment of the class.

Checks should be made payable to The Academy for Manufacturing Careers. JAMA Members - will be invoiced for full amount. Non-Member Companies – ½ due at registration with remainder due before start of class. Individuals - $100.00 at registration, ½ of remaining fee before start of class, remainder due at mid-term. If you are a self- pay student you can get the member rate if balance is paid in full before class starts. We accept, Visa and Mastercard credit cards.

To REGISTER: Complete the attached registration form and return to:Mail: The Academy for Manufacturing Careers

2545 Spring Arbor Road, Suite 201, Jackson, MI 49203Phone: 517-782-8268 Fax: 517-435-4126

E-mail: osteele@mijama.org

September 2015

THE ACADEMY FOR MANUFACTURING CAREERSMARCH 2017

REGISTRATION OPENS JANUARY 9, 2017 REGISTRATION DEADLINE FEBRUARY 10, 2017 @ 4:00PM

A $50 late registration fee will be charged if you register for or change classes after the registration deadline.Drop Policy: You will receive a 100% refund for any class you drop on or before the last day of the registration period for the term. If you DROP after the last day of the registration period you will be responsible for 50% of the class fees. A student should not simply stop attending a class; they need to notify The Academy immediately. Failure to notify the Academy may result in you receiving a 0 or F for the class and the student will also still be responsible for full payment of the class.

Checks should be made payable to The Academy for Manufacturing Careers. JAMA Members - will be invoiced for full amount. Non-Member Companies – ½ due at registration with remainder due before start of class. Individuals - $100.00 at registration, ½ of remaining fee before start of class, remainder due at mid-term. If you are a self- pay student you can get the member rate if balance is paid in full before class starts. We accept, Visa and Mastercard credit cards.

To REGISTER: Complete the attached registration form and return to:Mail: The Academy for Manufacturing Careers

2545 Spring Arbor Road, Suite 201, Jackson, MI 49203Phone: 517-782-8268 Fax: 517-435-4126

E-mail: osteele@mijama.org

THE ACADEMY FOR MANUFACTURING CAREERSSeptember 2015

CLASS NAME AMC Placement Basic Computers Test-Out Basic Gauges & Measurement Test-Out

PRE-REQUISITE None None None

DESCRIPTION This assessment is required to make a determination on whether you are placed in Basic Math or Algebra.

This opportunity is being provided for anyone who would like to test out of the Basic Computers class. You must complete and pass an online computer test that includes Word, PowerPoint and Excel.

Test covers basic functions in Word, Excel and PowerPoint.

This opportunity is being provided for anyone who would like to test out of the Basic Gauges & Measurement Class. You must complete and pass BOTH written and hands-on practical testing.

Test covers the proper naming, use, and calibration of measuring instruments found within a manufacturing environment. Instruments covered include but are not limited to calipers, micrometers, sine bars, and gauges in both inch and metric units.

COURSE ID # AMC 700 AMC 161 AMC 650DATES Feb. 27 Feb. 27 Feb. 27

DAYS Monday Monday Monday

TIMES 5:00pm-8:00pm 5:00pm-8:00pm 5:00pm-8:00pm

LOCATION JACC-Tech Lab/East6800 Browns Lake RdJackson, MI 49201

JACC-Tech Lab/East6800 Browns Lake RdJackson, MI 49201

JACC-Tech Lab/East6800 Browns Lake RdJackson, MI 49201

JAMA RATE No Cost $150 $150

NON-MEMBER No Cost $150 $150

MARCH 2017REGISTRATION OPENS JANUARY 9, 2017

REGISTRATION DEADLINE FEBRUARY 10, 2017 @ 4:00PM

A $50 late registration fee will be charged if you register for or change classes after the registration deadline.Drop Policy: You will receive a 100% refund for any class you drop on or before the last day of the registration period for the term. If you DROP after the last day of the registration period you will be responsible for 50% of the class fees. A student should not simply stop attending a class; they need to notify The Academy immediately. Failure to notify the Academy may result in you receiving a 0 or F for the class and the student will also still be responsible for full payment of the class.

Checks should be made payable to The Academy for Manufacturing Careers. JAMA Members - will be invoiced for full amount. Non-Member Companies – ½ due at registration with remainder due before start of class. Individuals - $100.00 at registration, ½ of remaining fee before start of class, remainder due at mid-term. If you are a self- pay student you can get the member rate if balance is paid in full before class starts. We accept, Visa and Mastercard credit cards.

To REGISTER: Complete the attached registration form and return to:Mail: The Academy for Manufacturing Careers

2545 Spring Arbor Road, Suite 201, Jackson, MI 49203Phone: 517-782-8268 Fax: 517-435-4126

E-mail: osteele@mijama.org

September 2015

CLASS NAME Basic Industrial Electricity

Work Life Skills Jig and Fixture Design

PRE-REQUISITE

None None Intermediate Blueprint/GD&T

DESCRIPTION This class is designed to give a basic understanding of safely working with and around electricity in an industrial environment. The course topics include: electrical theory, power and control circuits, DC and AC, batteries inductance, capacitance, transformers, measuring of circuits, lighting, machines, single and three phase motors, control circuits and components, and maintenance procedures.

This course will examine the role of communication in achieving organizational goals. Emphasis will be placed on business relationships, managerial styles and group interaction as components of organizational problem solving. Students will develop an ability to assess, select, compose and evaluate messages exchanged within organizations, both oral and written.

This course helps the student develop a thorough understanding and working knowledge of how and why jigs and fixtures are designed and built as they are. To do this the discussion starts with the fundamentals of jigs and fixtures and works through the various elements and considerations of design. Two fundamental tool design principles are constantly stressed: simplicity and economy. Design sketching is used to allow the student to demonstrate an understanding of the theories presented.

COURSE ID # AMC 140 AMC 165 AMC 240DATES Mar. 13,20,27

Apr. 3,10,17,24May 1

Mar. 14,21,28Apr. 4,11,18,25May 2

Mar. 14,16,21,23,28,30Apr. 4,6,11,13,18,20,25,27May 2,4

DAYS Mondays Tuesdays Tuesdays & Thursdays

TIMES 5:00pm-9:00pm 6:00pm-10:00pm 5:00pm-8:00pm

LOCATION JACC-Manufacturing Lab6800 Browns Lake RdJackson, MI 49201

JACC-Sales Classroom6800 Browns Lake RdJackson, MI 49201

JACC-Construction6800 Browns Lake RdJackson, MI 49201

JAMA RATE $670 $600 $655

NON-MEMBER $770 $700 $755

THE ACADEMY FOR MANUFACTURING CAREERSMARCH 2017

REGISTRATION OPENS JANUARY 9, 2017 REGISTRATION DEADLINE FEBRUARY 10, 2017 @ 4:00PM

A $50 late registration fee will be charged if you register for or change classes after the registration deadline.

Drop Policy: You will receive a 100% refund for any class you drop on or before the last day of the registration period for the term. If you DROP after the last day of the registration period you will be responsible for 50% of the class fees. A student should not simply stop attending a class; they need to notify The Academy immediately. Failure to notify the Academy may result in you receiving a 0 or F for the class and the student will also still be responsible for full payment of the class.

Checks should be made payable to The Academy for Manufacturing Careers. JAMA Members - will be invoiced for full amount. Non-Member Companies – ½ due at registration with remainder due before start of class. Individuals - $100.00 at registration, ½ of remaining fee before start of class, remainder due at mid-term. If you are a self- pay student you can get the member rate if balance is paid in full before class starts. We accept, Visa and Mastercard credit cards.

To REGISTER: Complete the attached registration form and return to:Mail: The Academy for Manufacturing Careers

2545 Spring Arbor Road, Suite 201, Jackson, MI 49203Phone: 517-782-8268 Fax: 517-435-4126

E-mail: osteele@mijama.org

September 2015

CLASS NAME Welding I Basic Gauges & Measurements

Geometry

PRE-REQUISITE

None Industrial Blueprint Reading Algebra

DESCRIPTION The Welding I course is beginning theory with an introduction to safety in welding. It should include instruction on the safe operation and hands-on applications of oxyacetylene welding, cutting, brazing, and shield metal arc welding. The welding defects associated with oxyacetylene welding, torch brazing, cutting, shielded metal arc welding, filler metal selection of electrodes. The filler metal designation system, weld ability of metals and defects associated with SMAW, plasma cutting and air carbon arc gouging.

Covers use of calipers, micrometers, English and metric gauges and other measuring instruments within a manufacturing environment. Topics include: English vs. metric, calibration of instruments, importance of repeatability, hands-on measurement of piecework, and instrument inspection and care.

Review of arithmetic and algebra. Introductory geometry including: axioms, theorems, propositions, dealing with straight lines, triangles, polygons and circles.

COURSE ID # AMC 225 AMC 130 AMC207DATES Mar. 14,16,21,23,28,30

Apr. 4,6,11,13,18,20,25,27May 2,4

Mar.15,22,29Apr. 5,12,19,26May 3

Mar.15,22,29Apr. 5,12,19,26May 3

DAYS Tuesdays & Thursdays Wednesdays Wednesdays

TIMES 5:00pm-9:00pm 6:00pm-10:00pm 5:00pm-9:00pm

LOCATION JACC-Welding 6800 Browns Lake RdJackson, MI 49201

JACC-Precision Machining6800 Browns Lake RdJackson, MI 49201

JACC-Tech Lab6800 Browns Lake RdJackson, MI 49201

JAMA RATE $795 $720 $625

NON-MEMBER $895 $820 $725

THE ACADEMY FOR MANUFACTURING CAREERSMARCH 2017

REGISTRATION OPENS JANUARY 9, 2017 REGISTRATION DEADLINE FEBRUARY 10, 2017 @ 4:00PM

A $50 late registration fee will be charged if you register for or change classes after the registration deadline.Drop Policy: You will receive a 100% refund for any class you drop on or before the last day of the registration period for the term. If you DROP after the last day of the registration period you will be responsible for 50% of the class fees. A student should not simply stop attending a class; they need to notify The Academy immediately. Failure to notify the Academy may result in you receiving a 0 or F for the class and the student will also still be responsible for full payment of the class.

Checks should be made payable to The Academy for Manufacturing Careers. JAMA Members - will be invoiced for full amount. Non-Member Companies – ½ due at registration with remainder due before start of class. Individuals - $100.00 at registration, ½ of remaining fee before start of class, remainder due at mid-term. If you are a self- pay student you can get the member rate if balance is paid in full before class starts. We accept, Visa and Mastercard credit cards.

To REGISTER: Complete the attached registration form and return to:Mail: The Academy for Manufacturing Careers

2545 Spring Arbor Road, Suite 201, Jackson, MI 49203Phone: 517-782-8268 Fax: 517-435-4126

E-mail: osteele@mijama.org

September 2015

CLASS NAME EDM Basic Industrial PLC Basic MathPRE-REQUISITE None None AMC Placement

DESCRIPTION This course will present the fundamentals of Electrical Discharge Machining. Concepts will include electrode selection for vertical EDM, flushing & orbiting operations. The class will cover differences between CNC and manual operations; describe dielectric oil and the process for discharge dressing electrodes. Students will learn wire EDM operations, wire types, selection process and wire flushing. Students will discuss the effects of water quality, carbide and the EDM process. The course will also include preventative maintenance procedures.

This course is intended for individuals new to PLC programming. It is an overview of SLC and Micrologix hardware, communications, cabling, and system design. It introduces the student to RSLogix 500 and its features for ladder programming. The course also has instructor led labs that cover a variety of programming instructions used with SLC 500 and RSLogix 500 software, including examine on/off, output energize, latch and unlatch, timers, counters, math statements, comparisons, branching, etc.

Consists of six modules covering the concepts of whole numbers, fractions, decimals, ratios, percent’s, and the basic use of signed numbers, exponents, and order of operations.

COURSE ID # AMC 255 AMC 265 AMC 111DATES Mar. 13,15,20,22,27,29

Apr. 3,5,10,12,17,19,24,26May 1,3

Mar. 14,21,28Apr. 4,11,18,25May 2

Mar. 16,23,30Apr. 6,13,20,27May 4

DAYS Mondays & Wednesdays Tuesdays Thursdays

TIMES 5:00pm-8:00pm 5:00pm-9:00pm 6:00pm-10:00pm

LOCATION JACC-Construction6800 Browns Lake RdJackson, MI 49201

JACC-Manufacturing Lab6800 Browns Lake RdJackson, MI 49201

JACC-Sales Classroom6800 Browns Lake RdJackson, MI 49201

JAMA RATE $655 $625 $625

NON-MEMBER $755 $725 $725

THE ACADEMY FOR MANUFACTURING CAREERSMARCH 2017

REGISTRATION OPENS JANUARY 9, 2017 REGISTRATION DEADLINE FEBRUARY 10, 2017 @ 4:00PM

A $50 late registration fee will be charged if you register for or change classes after the registration deadline.

Drop Policy: You will receive a 100% refund for any class you drop on or before the last day of the registration period for the term. If you DROP after the last day of the registration period you will be responsible for 50% of the class fees. A student should not simply stop attending a class; they need to notify The Academy immediately. Failure to notify the Academy may result in you receiving a 0 or F for the class and the student will also still be responsible for full payment of the class.

Checks should be made payable to The Academy for Manufacturing Careers. JAMA Members - will be invoiced for full amount. Non-Member Companies – ½ due at registration with remainder due before start of class. Individuals - $100.00 at registration, ½ of remaining fee before start of class, remainder due at mid-term. If you are a self- pay student you can get the member rate if balance is paid in full before class starts. We accept, Visa and Mastercard credit cards.

To REGISTER: Complete the attached registration form and return to:Mail: The Academy for Manufacturing Careers

2545 Spring Arbor Road, Suite 201, Jackson, MI 49203Phone: 517-782-8268 Fax: 517-435-4126

E-mail: osteele@mijama.org

September 2015

CLASS NAME Intro. to CAD Industrial Blueprint Reading Die Theory & DesignPRE-

REQUISITENone None None

DESCRIPTION Introduces students to the use of the computer in the creation of drawings in place of traditional drafting methods. Students will create and edit drawings using the computer and AutoCAD software.

This course will provide the student with a working knowledge and understanding of a variety of mechanical blueprints. Students will learn to recognize and identify symbols and specifications common to modern industrial blueprints. Topics will include: lines and symbols, views, form, position, title blocks, sketching, features, and sections.

This course instructs students in the principles and applications of basic die design and die-work with new ways to improve processes and reduce costs, from design through manufacturing. Discuss custom-made automated systems, coating of tools for durability, specialized hardware components and strain hardening of material.

COURSE ID # AMC 105 AMC 100 AMC 245DATES Mar. 13,15,20,22,27,29

Apr. 3,5,10,12,17,19,24,26May 1,3

Mar. 14,21,28Apr. 4,11,18,25May 2

Mar. 13,15,20,22,27,29Apr. 3,5,10,12,17,19,24,26May 1,3

DAYS Mondays & Wednesdays Tuesdays Mondays & Wednesdays

TIMES 5:00pm-8:00pm 5:00pm-9:00pm 5:00pm-8:00pm

LOCATION JACC-Tech Lab/East6800 Browns Lake RdJackson, MI 49201

JACC-Ag. Science6800 Browns Lake RdJackson, MI 49201

JACC-Sales6800 Browns Lake RdJackson, MI 49201

JAMA RATE $660 $565 $720

NON-MEMBER

$760 $665 $820

THE ACADEMY FOR MANUFACTURING CAREERSMARCH 2017

REGISTRATION OPENS JANUARY 9, 2017 REGISTRATION DEADLINE FEBRUARY 10, 2017 @ 4:00PM

A $50 late registration fee will be charged if you register for or change classes after the registration deadline.

Drop Policy: You will receive a 100% refund for any class you drop on or before the last day of the registration period for the term. If you DROP after the last day of the registration period you will be responsible for 50% of the class fees. A student should not simply stop attending a class; they need to notify The Academy immediately. Failure to notify the Academy may result in you receiving a 0 or F for the class and the student will also still be responsible for full payment of the class.

Checks should be made payable to The Academy for Manufacturing Careers. JAMA Members - will be invoiced for full amount. Non-Member Companies – ½ due at registration with remainder due before start of class. Individuals - $100.00 at registration, ½ of remaining fee before start of class, remainder due at mid-term. If you are a self- pay student you can get the member rate if balance is paid in full before class starts. We accept, Visa and Mastercard credit cards.

To REGISTER: Complete the attached registration form and return to:Mail: The Academy for Manufacturing Careers

2545 Spring Arbor Road, Suite 201, Jackson, MI 49203Phone: 517-782-8268 Fax: 517-435-4126

E-mail: osteele@mijama.org

September 2015

CLASS NAME CNC Lathe Theory & Programming

Machining Theory & Methods

PRE-REQUISITE CNC Mill Theory &

Programming

Basic Gauges & Measurement

DESCRIPTION This course introduces the students to the theories and basic programming fundamentals of the Computerized Numerical Controlled Lathe process.

A basic course in machining theory and an introduction to the use of common tools and techniques in manufacturing. Topics introduced include: turning, boring, drilling, milling, grinding, use of hand tools, machine setup, preventative maintenance, and efficient operation of tools.

COURSE ID # AMC 251 AMC 120DATES Mar. 13,20,27

Apr. 3,10,17,24May 1

Mar. 14,16,21,23,28,30Apr. 4,6,11,13,18,20,25,27May 2,4

DAYS Mondays Tuesdays & Thursdays

TIMES 6:00pm-10:00pm 6:00pm-10:00pm

LOCATION JACC-Precision Machining6800 Browns Lake RdJackson, MI 49201

JACC-Precision Machining6800 Browns Lake RdJackson, MI 49201

JAMA RATE $625 $785

NON-MEMBER

$725 $885

THE ACADEMY FOR MANUFACTURING CAREERS

COMMUNITY FIRST AID AND SAFETY IN COOPERATION WITH THE AMERICAN HEART ASSOCIATION

Heartsaver® First Aid CPR AEDThe AHA's Heartsaver First Aid CPR AED Course is a classroom, Instructor-led course designed to prepare students to provide first aid, CPR, and use an automated external defibrillator (AED) use in a safe, timely, and effective manner.

Upon successful completion of the course, including a first aid skills demonstration and a CPR and AED skills test, students receive a Heartsaver First Aid CPR AED course completion card, valid for two years.

Course Content First aid basics Medical emergencies Injury emergencies Environmental emergencies Preventing illness and injury Adult CPR and AED use Opioid–associated life-threatening emergencies Optional modules in child CPR and AED use and infant CPR Optional Exam

Saturday, March 18, 20179:00 am – 2:30 pm

Jackson College2111 Emmons Road, Health Laboratory Center Building, Room 211

$200.00 per person Space is limited, you will be registered on a first come-first serve basis.

To Register: Complete the attached registration form and return to:

The Academy for Manufacturing Careers2545 Spring Arbor Road, Suite 201

Jackson, MI 49203Checks should be made payable to: The Academy for Manufacturing Careers

For more information contact: Olivia Steele 517-782-8268.or E-mail: o steele @ mijama .org

September 2015

THE ACADEMY FOR MANUFACTURING CAREERSMAY 2017

REGISTRATION OPENS MARCH 13, 2017 REGISTRATION DEADLINE APRIL 14, 2017 @ 4:00PM

CLASS NAME Basic Computers Industrial Blueprint Reading

Materials & Metallurgy Intro to Lean Theory

PRE-REQUISITE

None None None None

DESCRIPTION This class will provide students with hands-on experience in the basics of computer concepts ranging from Windows 7 to Microsoft Office, Excel, PowerPoint and Outlook.

This course will provide the student with a working knowledge and understanding of a variety of mechanical blueprints. Students will learn to recognize and identify symbols and specifications common to modern industrial blueprints. Topics will include: lines and symbols, views, form, position, title blocks, sketching, features, and sections.

This course will provide the student with a working knowledge of the properties, uses, and treatment methods used to alter the properties of commonly used metals and alloys. This knowledge may be applied to the design, selection, processing and testing of metal parts.

The various tools such as: Takt time, Pitch Supermarkets, Line Balancing, 5S, Total Productive Maintenance, Standardized Work, Heijunka – Level Loading and others will be explained and demonstrated in various simulations. Case studies will also be analyzed.

COURSE ID # AMC 160 AMC 100 AMC 135 AMC 150DATES May 15,22

June 5,12,19,26July 10,17

May 18,25June 1,8,15,22,29July 6

May 16,23,30June 6,13,20,27July 11

May 15,17,22,24,31June 5,7,12,14,19,21,26,28July 5,10,12

DAYS Mondays Thursdays Tuesdays Mondays & Wednesdays

TIMES 5:00pm-9:00pm 6:00pm-10:00pm 6:00pm-10:00pm 5:00pm-8:00pm

LOCATION JACC-Tech Lab/East6800 Browns Lake Rd Jackson, MI 49201

JACC-Precision Machining6800 Browns Lake RdJackson, MI 49201

JACC-Precision Machining6800 Browns Lake RdJackson, MI 49201

JACC-Manufacturing Lab6800 Browns Lake RdJackson, MI 49201

JAMA RATE $555 $565 $620 $795

NON-MEMBER

$655 $665 $720 $895

A $50 late registration fee will be charged if you register for or change classes after the registration deadline.

Drop Policy: You will receive a 100% refund for any class you drop on or before the last day of the registration period for the term. If you DROP after the last day of the registration period you will be responsible for 50% of the class fees. A student should not simply stop attending a class; they need to notify The Academy immediately. Failure to notify the Academy may result in you receiving a 0 or F for the class and the student will also still be responsible for full payment of the class.

Checks should be made payable to The Academy for Manufacturing Careers. JAMA Members - will be invoiced for full amount. Non-Member Companies – ½ due at registration with remainder due before start of class. Individuals - $100.00 at registration, ½ of remaining fee before start of class, remainder due at mid-term. If you are a self- pay student you can get the member rate if balance is paid in full before class starts. We accept, Visa and Mastercard credit cards.

To REGISTER: Complete the attached registration form and return to:Mail: The Academy for Manufacturing Careers

2545 Spring Arbor Road, Suite 201, Jackson, MI 49203Phone: 517-782-8268 Fax: 517-435-4126

E-mail: osteele@mijama.org

September 2015

THE ACADEMY FOR MANUFACTURING CAREERSMAY 2017

REGISTRATION OPENS MARCH 13, 2017 REGISTRATION DEADLINE APRIL 14, 2017 @ 4:00PM

A

$50 late registration fee will be charged if you register for or change classes after the registration deadline.Drop Policy: You will receive a 100% refund for any class you drop on or before the last day of the registration period for the term. If you DROP after the last day of the registration period you will be responsible for 50% of the class fees. A student should not simply stop attending a class; they need to notify The Academy immediately. Failure to notify the Academy may result in you receiving a 0 or F for the class and the student will also still be responsible for full payment of the class.

Checks should be made payable to The Academy for Manufacturing Careers. JAMA Members - will be invoiced for full amount. Non-Member Companies – ½ due at registration with remainder due before start of class. Individuals - $100.00 at registration, ½ of remaining fee before start of class, remainder due at mid-term. If you are a self- pay student you can get the member rate if balance is paid in full before class starts. We accept, Visa and Mastercard credit cards.

To REGISTER: Complete the attached registration form and return to:Mail: The Academy for Manufacturing Careers

2545 Spring Arbor Road, Suite 201, Jackson, MI 49203Phone: 517-782-8268 Fax: 517-435-4126

E-mail: osteele@mijama.org

THE ACADEMY FOR MANUFACTURING CAREERSSeptember 2015

CLASS NAME Trigonometry Basic Industrial Electricity Work Life SkillsPRE-REQUISITE Algebra None NoneDESCRIPTION Students will learn to express

decimal degrees as degrees, minutes and seconds. Complete unknown angles and side of similar triangles. Use geometric principles to solve problems of internally and externally tangent circles.

This class is designed to give a basic understanding of safely working with and around electricity in an industrial environment. The course topics include: electrical theory, power and control circuits, DC and AC, batteries inductance, capacitance, transformers, measuring of circuits, lighting, machines, single and three phase motors, control circuits and components, and maintenance procedures.

This course will examine the role of communication in achieving organizational goals. Emphasis will be placed on business relationships, managerial styles and group interaction as components of organizational problem solving. Students will develop an ability to assess, select, compose and evaluate messages exchanged within organizations, both oral and written.

COURSE ID # AMC 208 AMC 140 AMC 165DATES May 17,24,31

June 7,14,21,28July 5

May 15,22June 5,12,19,26July 10,17

May 16,23,30June 6,13,20,27July 11

DAYS Wednesdays Mondays Tuesdays

TIMES 5:00pm-9:00pm 5:00pm-9:00pm 6:00pm-10:00pm

LOCATION JACC-Construction6800 Browns Lake RdJackson, MI 49201

JACC-Sales6800 Browns Lake RdJackson, MI 49201

JACC-Construction 6800 Browns Lake RdJackson, MI 49201

JAMA RATE $625 $670 $600

NON-MEMBER $725 $770 $700

MAY 2017REGISTRATION OPENS MARCH 13, 2017

REGISTRATION DEADLINE APRIL 14, 2017 @ 4:00PM CLASS NAME Industrial Wiring Intermediate

Blueprint Reading/GD&T

Precision Machining Methods

Algebra

PRE-REQUISITE

Basic Industrial Electricity Industrial Blueprint Reading

Machining Theory & Methods

Basic Math

DESCRIPTION This class will cover practical applications of Industrial Electrical Wiring. The course will start with codes, standards, and electrical prints. The course will then move on to the safe use of hand tools and power tools used in the industry. Also, materials used in the industrial environment and how to determine correct wire size and voltage levels will be determined. Finally the installation of equipment and repairs will be explored.

Geometric Dimensioning and Tolerancing covers the fundamentals of GD&T concepts, and teaches how to read and interpret prints with GD&T symbols. Content is based upon ANSI/ASME Y 14.5M-2009 standards.

The basics of precision machining operations utilizing a variety of machine tools and related equipment. Topics include: operation and use of drill presses, lathes, power saws, grinders, vertical and horizontal milling machines, and other basic machine tools; bench work (hand and power hack saws, deburring, shearing, filing, polishing, use of hand taps, and cutting threads with a die); safety; and good housekeeping.

Students will work with handbook formulas as well as computations required for practical application. Students will develop the ability to evaluate expressions and to express word statements as an algebraic problem.

COURSE ID # AMC 270 AMC 200 AMC 218 AMC 113DATES May 17,24,31

June 7,14,21,28July 5

May 17,24,31June 7,14,21,28July 5

May 17,24,31June 7,14,21,28July 5

May 18,25June 1,8,15,22,29July 6

DAYS Wednesdays Wednesdays Wednesdays Thursdays

TIMES 5:00pm-9:00pm 5:00pm-9:00pm 6:00pm-10:00pm 6:00pm-10:00pm

LOCATION JACC-Sales6800 Browns Lake RdJackson, MI 49201

JACC-CIT6800 Browns Lake RdJackson, MI 49201

JACC-Precision Machining6800 Browns Lake RdJackson, MI 49201

JACC-Construction6800 Browns Lake RdJackson, MI 49201

JAMA RATE $625 $565 $625 $625

NON-MEMBER

$725 $665 $725 $725

A $50 late registration fee will be charged if you register for or change classes after the registration deadline.

Drop Policy: You will receive a 100% refund for any class you drop on or before the last day of the registration period for the term. If you DROP after the last day of the registration period you will be responsible for 50% of the class fees. A student should not simply stop attending a class; they need to notify The Academy immediately. Failure to notify the Academy may result in you receiving a 0 or F for the class and the student will also still be responsible for full payment of the class.

Checks should be made payable to The Academy for Manufacturing Careers. JAMA Members - will be invoiced for full amount. Non-Member Companies – ½ due at registration with remainder due before start of class. Individuals - $100.00 at registration, ½ of remaining fee before start of class, remainder due at mid-term. If you are a self- pay student you can get the member rate if balance is paid in full before class starts. We accept, Visa and Mastercard credit cards.

To REGISTER: Complete the attached registration form and return to:Mail: The Academy for Manufacturing Careers

2545 Spring Arbor Road, Suite 201, Jackson, MI 49203Phone: 517-782-8268 Fax: 517-435-4126

E-mail: osteele@mijama.org

September 2015

THE ACADEMY FOR MANUFACTURING CAREERSMAY 2017

REGISTRATION OPENS MARCH 13, 2017 REGISTRATION DEADLINE APRIL 14, 2017 @ 4:00PM

A

$50 late registration fee will be charged if you register for or change classes after the registration deadline.Drop Policy: You will receive a 100% refund for any class you drop on or before the last day of the registration period for the term. If you DROP after the last day of the registration period you will be responsible for 50% of the class fees. A student should not simply stop attending a class; they need to notify The Academy immediately. Failure to notify the Academy may result in you receiving a 0 or F for the class and the student will also still be responsible for full payment of the class.

Checks should be made payable to The Academy for Manufacturing Careers. JAMA Members - will be invoiced for full amount. Non-Member Companies – ½ due at registration with remainder due before start of class. Individuals - $100.00 at registration, ½ of remaining fee before start of class, remainder due at mid-term. If you are a self- pay student you can get the member rate if balance is paid in full before class starts. We accept, Visa and Mastercard credit cards.

To REGISTER: Complete the attached registration form and return to:Mail: The Academy for Manufacturing Careers

2545 Spring Arbor Road, Suite 201, Jackson, MI 49203Phone: 517-782-8268 Fax: 517-435-4126

E-mail: osteele@mijama.org

THE ACADEMY FOR MANUFACTURING CAREERSAUGUST 2017

September 2015

CLASS NAME Machine Maintenance & Troubleshooting Welding IIIPRE-

REQUISITENone Welding II

DESCRIPTION This course covers methods and means used to troubleshoot and maintain machines typically found in a manufacturing environment. Problem symptoms, problem identification, maintenance records and systems will be covered.

Covers theory and fundamental application of welding as required in the fabrication of aluminum and stainless steel. Includes development of basic skills in preparation, cutting and welding of these unique materials. Provides hands-on experience with the use of GMAW and GTAW on aluminum and stainless steel.

COURSE ID # AMC 260 AMC 231DATES May18,23,25,30

June 1,6,8,13,15,20,22,27,29July 6,11

May18,23,25,30June 1,6,8,13,15,20,22,27,29July 6,11

DAYS Tuesdays & Thursdays Tuesdays & Thursdays

TIMES 5:00pm-8:00pm 5:00pm-9:00pm

LOCATION JACC-Manufacturing Lab6800 Browns Lake RdJackson, MI 49201

JACC-Welding6800 Browns Lake RdJackson, MI 49201

JAMA RATE $655 $795

NON-MEMBER

$755 $895

REGISTRATION OPENS JULY 3, 2017 REGISTRATION DEADLINE JULY 28, 2017 @ 4:00PM

CLASS NAME AMC Placement Problem Solving Electrical Troubleshooting

Geometry

PRE-REQUISITE

None None Basic Industrial Electricity

Algebra

DESCRIPTION This assessment is required to make a determination on whether you are placed in Basic Math or Algebra.

This class will introduce participants to the problem solving basics and G8-D reporting methods. It covers the reasons for gathering data when you need to analyze a problem and introduces students to some of the basic tools of problem solving and how these tools are used. Tools covered will include cause & effect (fishbone) diagrams, SPC control charts, 5-why methods, brainstorming and scatter diagrams.

This course explores troubleshooting in various areas such as: control circuits, combinations starters, control devices, special controls, DC motors, lightening systems with use of schematics, building drawings and with emphasis on cutting troubleshooting time.

Review of arithmetic and algebra. Introductory geometry including: axioms, theorems, propositions, dealing with straight lines, triangles, polygons and circles.

COURSE ID # AMC 700 AMC 145 AMC 285 AMC207DATES Aug. 15 Students will sign up for ONE

of the following sessions:Aug. 21,28Sept. 11,18,25Oct. 2,9,16

Aug. 23,30Sept. 6,13,20,27Oct. 4,11

DAYS Tuesday Wednesday, August 16OR

Thursday, August 17

Mondays Wednesdays

TIMES 5:00pm-8:00pm August 16 8:00am-4:30pmOR

August 17 1:00pm-8:00pm

5:00pm-9:00pm 5:00pm-9:00pm

LOCATION JACC-Restaurant6800 Browns Lake RdJackson, MI 49201

JACC-Manufacturing Lab6800 Browns Lake RdJackson, MI 49201

JACC-Sales6800 Browns Lake RdJackson, MI 49201

JACC-Tech Lab 6800 Browns Lake RdJackson, MI 49201

JAMA RATE $150 $385 $625 $625

NON-MEMBER $150 $485 $725 $725

A $50 late registration fee will be charged if you register for or change classes after the registration deadline.

Drop Policy: You will receive a 100% refund for any class you drop on or before the last day of the registration period for the term. If you DROP after the last day of the registration period you will be responsible for 50% of the class fees. A student should not simply stop attending a class; they need to notify The Academy immediately. Failure to notify the Academy may result in you receiving a 0 or F for the class and the student will also still be responsible for full payment of the class.

Checks should be made payable to The Academy for Manufacturing Careers. JAMA Members - will be invoiced for full amount. Non-Member Companies – ½ due at registration with remainder due before start of class. Individuals - $100.00 at registration, ½ of remaining fee before start of class, remainder due at mid-term. If you are a self- pay student you can get the member rate if balance is paid in full before class starts. We accept, Visa and Mastercard credit cards.

To REGISTER: Complete the attached registration form and return to:Mail: The Academy for Manufacturing Careers

2545 Spring Arbor Road, Suite 201, Jackson, MI 49203Phone: 517-782-8268 Fax: 517-435-4126

E-mail: osteele@mijama.org

THE ACADEMY FOR MANUFACTURING CAREERSAUGUST 2017

September 2015

REGISTRATION OPENS JULY 3, 2017 REGISTRATION DEADLINE JULY 28, 2017 @ 4:00PM

CLASS NAME Machining Theory & Methods

Industrial Hydraulics & Pneumatics

Welding II Basic Math

PRE-REQUISITE

Basic Gauges & Measurement

None None AMC Placement

DESCRIPTION A basic course in machining theory and an introduction to the use of common tools and techniques in manufacturing. Topics introduced include: turning, boring, drilling, milling, grinding, use of hand tools, machine setup, preventative maintenance, and efficient operation of tools.

This course provides instruction in the basics of hydraulic and pneumatic systems including pumps, valving, control assemblies, and actuators. Provides a general understanding of basic laws and formulas used in simple hydraulic circuits, including standard hydraulic symbols, and maintenance procedures.

This is a welding course in GMAW (gas metal arc welding formally known as MIG welding) and GTAW (gas tungsten arc welding formally known as TIG welding) processes and techniques. Topics will include safety, use of equipment, power sources, shielding gases, filler metals, welding techniques, troubleshooting, weld defects and welding in the flat, vertical and horizontal positions.

Consists of six modules covering the concepts of whole numbers, fractions, decimals, ratios, percent’s, and the basic use of signed numbers, exponents, and order of operations.

COURSE ID # AMC 120 AMC 220 AMC 230 AMC 111DATES Aug. 21,23,28,30

Sept. 6,11,13,18,20,25,27Oct. 2,4,9,11,16

Aug. 22,24,29,31Sept. 5,7,12,14,19,21,26,28Oct. 3,5,10,12

Aug. 22,24,29,31Sept. 5,7,12,14,19,21,26,28Oct. 3,5,10,12

Aug. 24,31Sept. 7,14,21,28Oct. 5,12

DAYS Mondays & Wednesdays Tuesday & Thursdays Tuesdays & Thursdays Thursdays

TIMES 6:00pm-10:00pm 5:00pm-9:00pm 5:00pm-9:00pm 6:00pm-10:00pm

LOCATION JACC-Welding6800 Browns Lake RdJackson, MI 49201

JACC-Manufacturing Lab6800 Browns Lake RdJackson, MI 49201

JACC-Welding6800 Browns Lake RoadJackson, MI 49201

JACC-Construction6800 Browns Lake RdJackson, MI 49201

JAMA RATE $785 $730 $795 $625

NON-MEMBER

$885 $830 $895 $725

A $50 late registration fee will be charged if you register for or change classes after the registration deadline.

Drop Policy: You will receive a 100% refund for any class you drop on or before the last day of the registration period for the term. If you DROP after the last day of the registration period you will be responsible for 50% of the class fees. A student should not simply stop attending a class; they need to notify The Academy immediately. Failure to notify the Academy may result in you receiving a 0 or F for the class and the student will also still be responsible for full payment of the class.

Checks should be made payable to The Academy for Manufacturing Careers. JAMA Members - will be invoiced for full amount. Non-Member Companies – ½ due at registration with remainder due before start of class. Individuals - $100.00 at registration, ½ of remaining fee before start of class, remainder due at mid-term. If you are a self- pay student you can get the member rate if balance is paid in full before class starts. We accept, Visa and Mastercard credit cards.

To REGISTER: Complete the attached registration form and return to:Mail: The Academy for Manufacturing Careers

2545 Spring Arbor Road, Suite 201, Jackson, MI 49203Phone: 517-782-8268 Fax: 517-435-4126

E-mail: osteele@mijama.org

THE ACADEMY FOR MANUFACTURING CAREERSAUGUST 2017

REGISTRATION OPENS JULY 3, 2017 September 2015

REGISTRATION DEADLINE JULY 28, 2017 @ 4:00PM

A

$50 late registration fee will be charged if you register for or change classes after the registration deadline.

Drop Policy: You will receive a 100% refund for any class you drop on or before the last day of the registration period for the term. If you DROP after the last day of the registration period you will be responsible for 50% of the class fees. A student should not simply stop attending a class; they need to notify The Academy immediately. Failure to notify the Academy may result in you receiving a 0 or F for the class and the student will also still be responsible for full payment of the class.

Checks should be made payable to The Academy for Manufacturing Careers. JAMA Members - will be invoiced for full amount. Non-Member Companies – ½ due at registration with remainder due before start of class. Individuals - $100.00 at registration, ½ of remaining fee before start of class, remainder due at mid-term. If you are a self- pay student you can get the member rate if balance is paid in full before class starts. We accept, Visa and Mastercard credit cards.

To REGISTER: Complete the attached registration form and return to:Mail: The Academy for Manufacturing Careers

2545 Spring Arbor Road, Suite 201, Jackson, MI 49203Phone: 517-782-8268 Fax: 517-435-4126

E-mail: osteele@mijama.org

The Academy for Manufacturing CareersAUGUST 2017

REGISTRATION OPENS JULY 3, 2017 REGISTRATION DEADLINE JULY 28, 2017 @ 4:00PM

September 2015

CLASS NAME Machine Maintenance & Troubleshooting

Moldmaking Basic Gauges & Measurements

PRE-REQUISITE None None Industrial Blueprint Reading

DESCRIPTION This course covers methods and means used to troubleshoot and maintain machines typically found in a manufacturing environment. Problem symptoms, problem identification, maintenance records and systems will be covered.

This course will present the fundamentals of mold design and construction. Students will learn to identify properties of plastics & metals, aluminum & zinc die casting molds and differentiate mold types. Students will understand heating and cooling, use and location of runners & gates, cores, cavities & inserts. Students will learn process for mold base preparation, how to determine mold life, factors affecting it and the reasons and procedures for mold polishing.

Covers use of calipers, micrometers, English and metric gauges and other measuring instruments within a manufacturing environment. Topics include: English vs. metric, calibration of instruments, importance of repeatability, hands-on measurement of piecework, and instrument inspection and care.

COURSE ID # AMC 260 AMC 235 AMC 130DATES Aug. 29,31

Sept. 5,7,12,14,19,21,26,28Oct. 3,5,10,12

Aug. 22,24,29,31Sept. 5,7,12,14,19,21,26,28Oct. 3,5,10,12

Aug. 24,31Sept. 7,14,21,28Oct. 5,12

DAYS Tuesdays & Thursdays Tuesdays & Thursdays Thursdays

TIMES 5:00pm-8:30pm 5:00pm-8:00pm 6:00pm-10:00pm

LOCATION JACC-Sales6800 Browns Lake RdJackson, MI 49201

JACC-Ag. Science6800 Browns Lake RdJackson, MI

JACC-Precision Machining6800 Browns Lake RdJackson, MI 49201

JAMA RATE $655 $635 $720

NON-MEMBER $755 $735 $820

CLASS NAME CNC Mill Theory & Programming

Work Life Skills Robotics & Material Handling

PRE-REQUISITE

Precision Machining Methods

None None

DESCRIPTION

This course introduces the students to the theories and basic programming fundamentals of the Computerized Numerical Controlled Mill process.

This course will examine the role of communication in achieving organizational goals. Emphasis will be placed on business relationships, managerial styles and group interaction as components of organizational problem solving. Students will develop an ability to assess, select, compose and evaluate messages exchanged within organizations, both oral and written.

An increasing number of companies are turning to robotics as a means for increased production. Robots have an impressive range of applications, from "pick and place" for packaging, to welding, painting, or inspecting parts immediately after a process. However, robots are not foolproof; they require effective preventive maintenance to ensure they operate at full capacity. If a robot malfunctions, an experienced maintenance professional must know how to troubleshoot the exact cause.These robotics classes cover the major components of industrial robots, the common applications for robots, and axis movement. Later classes address vision systems, effective preventive maintenance for robots, as well as common causes of robot failure along with the ways to identify those causes.

COURSE ID # AMC 250 AMC 165 AMC 280DATES Aug. 22,29

Sept. 5,12,19,26Oct. 3,10

Aug. 22,29Sept. 5,12,19,26Oct. 3,10

Aug. 21,23,28,30Sept. 6,11,13,18,20,25,27Oct. 2,4,9,11,16

DAYS Tuesdays Tuesdays Mondays & Wednesdays

TIMES 6:00pm-10:00pm 6:00pm-10:00pm 6:00pm-9:00pm

LOCATION JACC-Precision Machining6800 Browns Lake RdJackson, MI 49201

JACC-Construction6800 Browns Lake RdJackson, MI 49201

JACC-Precision Machining6800 Browns Lake RdJackson, MI 49201

JAMA RATE $625 $600 $745

NON-MEMBER

$725 $700 $845

A $50 late registration fee will be charged if you register for or change classes after the registration deadline.Drop Policy: You will receive a 100% refund for any class you drop on or before the last day of the registration period for the term. If you DROP after the last day of the registration period you will be responsible for 50% of the class fees. A student should not simply stop attending a class; they need to notify The Academy immediately. Failure to notify the Academy may result in you receiving a 0 or F for the class and the student will also still be responsible for full payment of the class.

Checks should be made payable to The Academy for Manufacturing Careers. JAMA Members - will be invoiced for full amount. Non-Member Companies – ½ due at registration with remainder due before start of class. Individuals - $100.00 at registration, ½ of remaining fee before start of class, remainder due at mid-term. If you are a self- pay student you can get the member rate if balance is paid in full before class starts. We accept, Visa and Mastercard credit cards.

To REGISTER: Complete the attached registration form and return to:Mail: The Academy for Manufacturing Careers

2545 Spring Arbor Road, Suite 201, Jackson, MI 49203Phone: 517-782-8268 Fax: 517-435-4126

E-mail: osteele@mijama.org

THE ACADEMY FOR MANUFACTURING CAREERS

September 2015

COMMUNITY FIRST AID AND SAFETY IN COOPERATION WITH THE AMERICAN HEART ASSOCIATION

Heartsaver® First Aid CPR AEDThe AHA's Heartsaver First Aid CPR AED Course is a classroom, Instructor-led course designed to prepare students to provide first aid, CPR, and use an automated external defibrillator (AED) use in a safe, timely, and effective manner.

Upon successful completion of the course, including a first aid skills demonstration and a CPR and AED skills test, students receive a Heartsaver First Aid CPR AED course completion card, valid for two years.

Course Content First aid basics Medical emergencies Injury emergencies Environmental emergencies Preventing illness and injury Adult CPR and AED use Opioid–associated life-threatening emergencies Optional modules in child CPR and AED use and infant CPR Optional Exam

Saturday, August 19, 20179:00 am – 2:30 pm

Jackson College2111 Emmons Road, Health Laboratory Center Building, Room 211

$200.00 per person Space is limited, you will be registered on a first come-first serve basis.

To Register: Complete the attached registration form and return to:

The Academy for Manufacturing Careers2545 Spring Arbor Road, Suite 201

Jackson, MI 49203Checks should be made payable to: The Academy for Manufacturing Careers

For more information contact: Olivia Steele 517-782-8268.or E-mail: o steele @ mijama .org

THE ACADEMY FOR MANUFACTURING CAREERSOCTOBER 2017

September 2015

REGISTRATION OPENS AUGUST 14, 2017 REGISTRATION DEADLINE SEPTEMBER 15, 2017 @ 4:00PM

A $50 late registration fee will be charged if you register for or change classes after the registration deadline.Drop Policy: You will receive a 100% refund for any class you drop on or before the last day of the registration period for the term. If you DROP after the last day of the registration period you will be responsible for 50% of the class fees. A student should not simply stop attending a class; they need to notify The Academy immediately. Failure to notify the Academy may result in you receiving a 0 or F for the class and the student will also still be responsible for full payment of the class.

Checks should be made payable to The Academy for Manufacturing Careers. JAMA Members - will be invoiced for full amount. Non-Member Companies – ½ due at registration with remainder due before start of class. Individuals - $100.00 at registration, ½ of remaining fee before start of class, remainder due at mid-term. If you are a self- pay student you can get the member rate if balance is paid in full before class starts. We accept, Visa and Mastercard credit cards.

To REGISTER: Complete the attached registration form and return to:Mail: The Academy for Manufacturing Careers

2545 Spring Arbor Road, Suite 201, Jackson, MI 49203Phone: 517-782-8268 Fax: 517-435-4126

E-mail: osteele@mijama.org

THE ACADEMY FOR MANUFACTURING CAREERSOCTOBER 2017

September 2015

CLASS NAME Basic Industrial Electricity

Intro to Lean Theory Precision Machining Methods

PRE-REQUISITE None None Machining Theory & Methods

DESCRIPTION This class is designed to give a basic understanding of safely working with and around electricity in an industrial environment. The course topics include: electrical theory, power and control circuits, DC and AC, batteries inductance, capacitance, transformers, measuring of circuits, lighting, machines, single and three phase motors, control circuits and components, and maintenance procedures.

The various tools such as: Takt time, Pitch Supermarkets, Line Balancing, 5S, Total Productive Maintenance, Standardized Work, Heijunka – Level Loading and others will be explained and demonstrated in various simulations. Case studies will also be analyzed.

The basics of precision machining operations utilizing a variety of machine tools and related equipment. Topics include: operation and use of drill presses, lathes, power saws, grinders, vertical and horizontal milling machines, and other basic machine tools; bench work (hand and power hack saws, deburring, shearing, filing, polishing, use of hand taps, and cutting threads with a die); safety; and good housekeeping.

COURSE ID # AMC 140 AMC 150 AMC 218DATES Oct. 23,30

Nov. 6,13,20,27Dec. 4,11

Oct. 24,26,31Nov. 2,7,9,14,16,21,28,30Dec. 5,7,12,14,19

Oct. 25Nov. 1,8,15,22,29Dec. 6,13

DAYS Mondays Tuesdays & Thursdays Wednesdays

TIMES 5:00pm-9:00pm 5:00pm-8:00pm 6:00pm-10:00pm

LOCATION JACC-Manufacturing Lab6800 Browns Lake RdJackson, MI 49201

JACC-Manufacturing Lab6800 Browns Lake RdJackson, MI 49201

JACC-Precision Machining6800 Browns Lake RdJackson, MI 49201

JAMA RATE $670 $795 $625

NON-MEMBER $770 $895 $725

REGISTRATION OPENS AUGUST 14, 2017 REGISTRATION DEADLINE SEPTEMBER 15, 2017 @ 4:00PM

CLASS NAME Die Theory & Design Industrial Blueprint Reading Jig and Fixture DesignPRE-REQUISITE None None Intermediate Blueprint/GD&TDESCRIPTION This course instructs students in

the principles and applications of basic die design and die-work with new ways to improve processes and reduce costs, from design through manufacturing. Discuss custom-made automated systems, coating of tools for durability, specialized hardware components and strain hardening of material.

This course will provide the student with a working knowledge and understanding of a variety of mechanical blueprints. Students will learn to recognize and identify symbols and specifications common to modern industrial blueprints. Topics will include: lines and symbols, views, form, position, title blocks, sketching, features, and sections.

This course helps the student develop a thorough understanding and working knowledge of how and why jigs and fixtures are designed and built as they are. To do this the discussion starts with the fundamentals of jigs and fixtures and works through the various elements and considerations of design. Two fundamental tool design principles are constantly stressed: simplicity and economy. Design sketching is used to allow the student to demonstrate an understanding of the theories presented.

COURSE ID # AMC 245 AMC 100 AMC 240DATES Oct. 24,26,31

Nov. 2,7,9,14,16,21,28,30Dec. 5,7,12,14,19

Oct. 23,30Nov. 6,13,20,27Dec. 4,11

Oct. 23,25,30Nov. 1,6,8,13,15,20,22,27,29Dec. 4,6,11,13

DAYS Tuesdays & Thursdays Mondays Mondays & Wednesdays

TIMES 5:00pm-8:00pm 5:00pm-9:00pm 5:00pm-8:00pm

LOCATION JACC-Construction6800 Browns Lake RdJackson, MI 49201

JACC-Construction6800 Browns Lake RdJackson, MI 49201

JACC-CIT6800 Browns Lake RdJackson, MI 49201

JAMA RATE $720 $565 $655

NON-MEMBER $820 $665 $755

A $50 late registration fee will be charged if you register for or change classes after the registration deadline.

Drop Policy: You will receive a 100% refund for any class you drop on or before the last day of the registration period for the term. If you DROP after the last day of the registration period you will be responsible for 50% of the class fees. A student should not simply stop attending a class; they need to notify The Academy immediately. Failure to notify the Academy may result in you receiving a 0 or F for the class and the student will also still be responsible for full payment of the class.

Checks should be made payable to The Academy for Manufacturing Careers. JAMA Members - will be invoiced for full amount. Non-Member Companies – ½ due at registration with remainder due before start of class. Individuals - $100.00 at registration, ½ of remaining fee before start of class, remainder due at mid-term. If you are a self- pay student you can get the member rate if balance is paid in full before class starts. We accept, Visa and Mastercard credit cards.

To REGISTER: Complete the attached registration form and return to:Mail: The Academy for Manufacturing Careers

2545 Spring Arbor Road, Suite 201, Jackson, MI 49203Phone: 517-782-8268 Fax: 517-435-4126

E-mail: osteele@mijama.org

THE ACADEMY FOR MANUFACTURING CAREERSOCTOBER 2017

September 2015

REGISTRATION OPENS AUGUST 14, 2017 REGISTRATION DEADLINE SEPTEMBER 15, 2017 @ 4:00PM

CLASS NAME CNC Lathe Theory & Programming

EDM Welding I

PRE-REQUISITE CNC Mill Theory & Programming

None None

DESCRIPTION This course introduces the students to the theories and basic programming fundamentals of the Computerized Numerical Controlled Lathe process.

This course will present the fundamentals of Electrical Discharge Machining. Concepts will include electrode selection for vertical EDM, flushing & orbiting operations. The class will cover differences between CNC and manual operations; describe dielectric oil and the process for discharge dressing electrodes. Students will learn wire EDM operations, wire types, selection process and wire flushing. Students will discuss the effects of water quality, carbide and the EDM process. The course will also include preventative maintenance procedures.

The Welding I course is beginning theory with an introduction to safety in welding. It should include instruction on the safe operation and hands-on applications of oxyacetylene welding, cutting, brazing, and shield metal arc welding. The welding defects associated with oxyacetylene welding, torch brazing, cutting, shielded metal arc welding, filler metal selection of electrodes. The filler metal designation system, weld ability of metals and defects associated with SMAW, plasma cutting and air carbon arc gouging.

COURSE ID # AMC 251 AMC 255 AMC 225DATES Oct. 23,30

Nov. 6,13,20,27Dec. 4,11

Oct. 24,26,31Nov. 2,7,9,14,16,21,28,30Dec. 5,7,12,14,19

Oct. 24,26,31Nov. 2,7,9,14,16,21,28,30Dec. 5,7,12,14,19

DAYS Mondays Tuesdays & Thursdays Tuesdays & Thursdays

TIMES 6:00pm-10:00pm 6:00pm-9:00pm 5:00pm-9:00pm

LOCATION JACC-Precision Machining6800 Browns Lake RdJackson, MI 49201

JACC-Precision Machining6800 Browns Lake RdJackson, MI 49201

JACC-Welding 6800 Browns Lake RdJackson, MI 49201

JAMA RATE $625 $655 $795

NON-MEMBER $725 $755 $895

A $50 late registration fee will be charged if you register for or change classes after the registration deadline.Drop Policy: You will receive a 100% refund for any class you drop on or before the last day of the registration period for the term. If you DROP after the last day of the registration period you will be responsible for 50% of the class fees. A student should not simply stop attending a class; they need to notify The Academy immediately. Failure to notify the Academy may result in you receiving a 0 or F for the class and the student will also still be responsible for full payment of the class.

Checks should be made payable to The Academy for Manufacturing Careers. JAMA Members - will be invoiced for full amount. Non-Member Companies – ½ due at registration with remainder due before start of class. Individuals - $100.00 at registration, ½ of remaining fee before start of class, remainder due at mid-term. If you are a self- pay student you can get the member rate if balance is paid in full before class starts. We accept, Visa and Mastercard credit cards.

To REGISTER: Complete the attached registration form and return to:Mail: The Academy for Manufacturing Careers

2545 Spring Arbor Road, Suite 201, Jackson, MI 49203Phone: 517-782-8268 Fax: 517-435-4126

E-mail: osteele@mijama.org

THE ACADEMY FOR MANUFACTURING CAREERSOCTOBER 2017

September 2015

REGISTRATION OPENS AUGUST 14, 2017 REGISTRATION DEADLINE SEPTEMBER 15, 2017 @ 4:00PM

CLASS NAME Materials & Metallurgy

Trigonometry Algebra Drive Components & Bearings

PRE-REQUISITE

None Algebra Basic Math None

DESCRIPTION This course will provide the student with a working knowledge of the properties, uses, and treatment methods used to alter the properties of commonly used metals and alloys. This knowledge may be applied to the design, selection, processing and testing of metal parts.

Students will learn to express decimal degrees as degrees, minutes and seconds. Complete unknown angles and side of similar triangles. Use geometric principles to solve problems of internally and externally tangent circles.

Students will work with handbook formulas as well as computations required for practical application. Students will develop the ability to evaluate expressions and to express word statements as an algebraic problem.

This course instructs students in the principles, applications, and maintenance of various types of bearings and mechanical couplings, including ball and roller, powdered metal, non-metallic, hydrostatic bearings, couplings, such as shear, torque limiting, floating and insulated, speed reducers, seals and gears.

COURSE ID # AMC 135 AMC 208 AMC 113 AMC 275DATES Oct. 25

Nov. 1,8,15,22,29Dec. 6,13

Oct. 25Nov. 1,8,15,22,29Dec. 6,13

Oct. 19,26Nov. 2,9,16,30Dec. 7,14

Oct. 19,26Nov. 2,9,16,30Dec. 7,14

DAYS Wednesdays Wednesdays Thursdays Thursdays

TIMES 5:00pm-9:00pm 5:00pm-9:00pm 6:00pm-10:00pm 5:00pm-9:00pm

LOCATION JACC-Construction6800 Browns Lake RdJackson, MI 49201

JACC-Sales Classroom6800 Browns Lake RdJackson, MI 49201

JACC-Ag. Science6800 Browns Lake RdJackson, MI 49201

JACC-Sales6800 Browns Lake RdJackson, MI 49201

JAMA RATE $620 $625 $625 $625

NON-MEMBER

$720 $725 $725 $725

A $50 late registration fee will be charged if you register for or change classes after the registration deadline.

Drop Policy: You will receive a 100% refund for any class you drop on or before the last day of the registration period for the term. If you DROP after the last day of the registration period you will be responsible for 50% of the class fees. A student should not simply stop attending a class; they need to notify The Academy immediately. Failure to notify the Academy may result in you receiving a 0 or F for the class and the student will also still be responsible for full payment of the class.

Checks should be made payable to The Academy for Manufacturing Careers. JAMA Members - will be invoiced for full amount. Non-Member Companies – ½ due at registration with remainder due before start of class. Individuals - $100.00 at registration, ½ of remaining fee before start of class, remainder due at mid-term. If you are a self- pay student you can get the member rate if balance is paid in full before class starts. We accept, Visa and Mastercard credit cards.

To REGISTER: Complete the attached registration form and return to:Mail: The Academy for Manufacturing Careers

2545 Spring Arbor Road, Suite 201, Jackson, MI 49203Phone: 517-782-8268 Fax: 517-435-4126

E-mail: osteele@mijama.org

September 2015