Upload
vutruc
View
216
Download
0
Embed Size (px)
Citation preview
RSUPPORT CO, Ltd. ©2007. All rights reserved. (http://www.remotecall.net)
RSUPPORT
RemoteCall v4.0 User Manual
V 1.0
RemoteCall 4.0 User Guide
RSUPPORT CO, Ltd. ©2007. All rights reserved. (http://www.remotecall.net) Page 2 of 22
Table of Contents Getting Started ............................................................................................................................................................. 3
What is RemoteCall Viewer? ............................................................................................................................................................. 3 Terminology Used .............................................................................................................................................................................. 3 How It Works ...................................................................................................................................................................................... 4 Technology and Security ................................................................................................................................................................... 4 System Requirements ........................................................................................................................................................................ 4
Installation and Setup .................................................................................................................................................. 5
Download and install RemoteCall Viewer .......................................................................................................................................... 5 Run RemoteCall for the first time ....................................................................................................................................................... 5 Customization .................................................................................................................................................................................... 5
Add a remote support link to your website ............................................................................................................................................... 5
Relay Page ................................................................................................................................................................................................... 6
How to Use ................................................................................................................................................................... 7
Representative Interface .................................................................................................................................................................... 7 Remote User Interface ....................................................................................................................................................................... 7 Main Menu and Toolbar ..................................................................................................................................................................... 8 Remote User Applet ......................................................................................................................................................................... 10 Getting Connected ........................................................................................................................................................................... 11
Web Icon Connection - http://rsup.net/RemoteCall ID .......................................................................................................................... 11
Session Code Connection - http://rsup.net ............................................................................................................................................. 11
Manual Client Connection......................................................................................................................................................................... 11
Connecting Multiple Users Simultaneously ............................................................................................................................................ 12
Controlling the Remote PC .............................................................................................................................................................. 12 Virus Scanning ................................................................................................................................................................................. 12 Ending the Session .......................................................................................................................................................................... 13
Settings and Session Management .......................................................................................................................... 14
Default Settings ................................................................................................................................................................................ 14 Performance Optimization ............................................................................................................................................................... 16 Example of Session Settings ........................................................................................................................................................... 17
Admin Center .............................................................................................................................................................. 18
Active Connections .......................................................................................................................................................................... 18 Session Log ..................................................................................................................................................................................... 18 Statistics ........................................................................................................................................................................................... 18 User Settings.................................................................................................................................................................................... 19 Reason for Call ................................................................................................................................................................................ 20 Web Viewer ...................................................................................................................................................................................... 20 Notices ............................................................................................................................................................................................. 20 Account Information ......................................................................................................................................................................... 20
RemoteCall FAQs ....................................................................................................................................................... 21
RemoteCall 4.0 User Guide
RSUPPORT CO, Ltd. ©2007. All rights reserved. (http://www.remotecall.net) Page 3 of 22
Getting Started This guide explains the installation process and use of RemoteCall version 4.0. RemoteCall is an industry standard in web-based remote support systems. It temporarily connects your computer to the customers’, allowing you to support and solve their IT problems. RemoteCall allows customers to share their screen in a secure, user friendly environment. Customers can receive remote support anytime, anywhere by simply clicking an icon on the web.
Benefits • Offers remote support, consulting, and training • No need to change your existing network settings • Customer friendly access • Remote access in real time • Supports network speeds as low as 56 kbps
What is RemoteCall Viewer?
RemoteCall Viewer is the client end of RemoteCall used by support representatives to connect with and support customers. Once a connection is established between a support representative and a customer the representative may assist the customer by taking full control of their keyboard and mouse or by simply chatting with them using the instant messaging applet. RemoteCall uses an intuitive interface that makes supporting as easy as possible, increasing efficiency and customer satisfaction.
Terminology Used
Representative Support agent assisting the customer
Remote User Customer requesting remote support
Local PC The support agent’s computer system used to support the customer
Remote PC The customer’s computer system in need of technical support
Relay Page Webpage used to initiate remote support over the internet (e.g. ‘http://rsup.net/support’). This page displays all
available support agents and redirects all communication between the local and remote PC
Session The remote connection between the customer and support agent
Session Code A four digit number representing an active session (e.g. 7213)
Pin-Code A four digit password protecting access to a remote session
RemoteCall ID The primary login ID (usually company name) used as the Relay Page URL (i.e. ‘http://rsup.net/yourID’)
User ID The representative’s login name for RemoteCall
Screen Name The representative’s display name in RemoteCall
P2P A direct connection between two PCs
Gateway A connection between two PCs relayed through a web server
VRVD Virtual Remote Video Driver, RemoteCall Viewer’s proprietary video driver
GDI Graphics Device Interface, a Windows video driver
Permissions The user’s RemoteCall privileges, such as control and security settings
RemoteCall 4.0 User Guide
RSUPPORT CO, Ltd. ©2007. All rights reserved. (http://www.remotecall.net) Page 4 of 22
How It Works
This section explains the fundamentals of how RemoteCall works. First, a connection must be established between the representative and the remote user to initiate remote support.
1. The representative launches RemoteCall Viewer to start the support session. Either the Relay Page URL or Session Code will appear in the RemoteCall Viewer window automatically. The representative then directs the user to access the URL (i.e. ‘rsup.net/RemoteCallID’).
2. After the necessary components are downloaded by the browser, the remote user simply clicks
on the representative’s numbered icon or enters in the session code to connect.
3. Next, the representative initiates support by chatting with the remote user and scanning the system to diagnose any problems. If required, the representative may activate full keyboard and/or mouse control to further assist the remote user.
4. Once the problems have been resolved the session can be disconnected by either the remote
user or representative. The remote user is then directed to a session summary webpage where they will see a log report of the session. Session details such as support session length, representative and contact information are shown.
Technology and Security
RemoteCall utilizes 256-bit Advanced Encryption Standard (AES) and industry standard Secure Socket Layer (SSL) encryption for all transmitted data. All data transmitted is secure and cannot be read by others. Connecting through one of our relay servers, a direct link is established between the representative and remote user and is maintained until either user decides to end the connection. We also guarantee the fastest remote connection possible due to RemoteCall’s Virtual Remote Video Driver (VRVD) and high speed packet switching technology, regardless of how many users are connected. While connected, the remote user maintains full control of their system and may disconnect the session at any time. The remote user may suspend representative control at any time by simply pressing ‘Ctrl+Alt+Shift’. Once the session has been ended, the connection is terminated and may not be re-established without the remote user’s authorization. System Requirements
Local and Remote PC OS: Windows 9x, 2000, XP, Vista Hardware: Pentium II 800 MHz or higher Web Browser: MS Internet Explorer 5.0 or higher Disk Space: 10MB Internet Connection: 56 kbps modem or higher
RemoteCall Server OS: Windows 2000, 2003 (MSSQL / SSL Required) Hardware: Xeon 2.4 GHz, RAM 1GB, NIC 10/100 Web Browser: MS Internet Explorer 5.0 or higher Disk Space: 500MB or more Internet Connection: T1 with one public IP address
To enable all features and functionality, RemoteCall Viewer needs to be installed on the local PC with administrator rights enabled.
RemoteCall 4.0 User Guide
RSUPPORT CO, Ltd. ©2007. All rights reserved. (http://www.remotecall.net) Page 5 of 22
Installation and Setup This section shows you how to install and setup RemoteCall Viewer on your local PC.
Download and install RemoteCall Viewer Run RemoteCall and login for the first time Add a Remote Support link to your website
Downloading and Installing RemoteCall Viewer
1. Download the RemoteCall Viewer 4.0 installation file remotecall40.exe to the local PC from www.remotecall.net. (File size is approximately 6 MB)
2. Open remotecall40.exe and click Run. 3. Choose your installation language and click Next. 4. Read the END-USER LICENSE AGREEMENT and select ‘I accept the terms of the license
agreement’ to continue. 5. Choose the destination folder for the installation and click Next. 6. If you use a proxy server, select the appropriate option. You can choose to manually enter in
the proxy server IP and port number or have RemoteCall auto detect it for you. 7. If you’re an existing user, select 'I already have a RemoteCall ID’ and click Next. 8. Once the installation is complete RemoteCall Viewer will update itself automatically.
Running RemoteCall for the First Time
When prompted, enter in your user ID and password to login. Once logged in, a support session will be started automatically. Session details will be displayed in the window such as the Relay Page URL or session code. The session status will be “Waiting” as no remote users are connected yet. At this time, you have the ability to end the active session. Customization
Add a remote support link to your website To allow remote users a quick and easy connection, we recommend integrating a ‘Remote Support’ icon on your web page and linking it to your Relay Page URL.
Setting up the link is easy: 1. Login to www.remotecall.net and access the admin center.
2. Click and select the icon you want displayed on your webpage.
3. Copy and paste the selected code directly into your website.
RSUPPOR
Relay P
RT CO, Ltd. ©
Page RemoteCall with your ow
Simply contawebpage impixels.
1. Banne2. Body (3. Conten4. Standb5. Footer
E
©2007. All righ
offers a custwn graphics a
act your Remages. The si
er (871 x 67(391 x 469nt (480 x 1by Icon (9r (410 x 42
EXAM
hts reserved. (
tom brandingand backgrou
moteCall supizes must be
7) 9) 126) 5 x 137)
2)
MPLE
(http://www.r
g option for tund image.
port team ore exact to fit t
remotecall.net
the Relay Pa
r your local rethe Relay Pa
Re
t)
age; by custo
eseller to senage template
emoteCall 4.0
omize the Re
nd us the cuse; all sizes ar
0 User Guide
Page 6 of 22
elay Page
stom e listed in
e
2
RSUPPOR
HowThis seincludin Repres
Remot
Main M
ShorRemote DRemote
Re
RT CO, Ltd. ©
w to Uction explai
ng the sideb
sentative
te User Int
enu and Too
rtcuts Diagnostics Processes port
Te
©2007. All righ
Use ins the use bars and sho
Interface
terface
olbar
ext Chat
R
hts reserved. (
of RemoteCortcut featu
Rem
Relay Page
(http://www.r
Call’s interfares makes
Cha
mote PC Nam
Conne
remotecall.net
ace, tools ait easy to fi
at Window
me and IP Ad
ection Status
Re
t)
and featuresnd what you
D
ddress
s Page
emoteCall 4.0
s. The intuitu’re looking
Scr
Status B
Draw Toolba
0 User Guide
Page 7 of 22
tive design g for.
Session StWindo
reen CaptureClipboard
Bar
ar
e
2
tatus ow
e and
RSUPPOR
Main M
The Remdrop dowtool. Thi * Depenadditiona
N
RT CO, Ltd. ©
Menu and
moteCall Viewn menus. Ins section exp
nding on youral features.
New Session
Keyboard/Mo
Mouse Chase
Laser Pointe
Draw allows t
Interactive D
The Draw Toline, or arrow move the draw
Screen Captu
File transfer location on th
Clipboard Shremote PC.
URL Push au
Zoom adjusts
Performancesettings in Re
Co-Browser
Presentation
Voice Chat e
PC Sound Sh
Audio Setting
Record starts
Stop ends the
Pause freeze
©2007. All righ
Toolbar
wer toolbar pnstead of scrplains the us
r version of R
launches a n
ouse Control
e displays the
er highlights se
the representa
Draw allows bo
oolbar allows yas well as squwing.
ure takes sna
sends files to/e remote PC.
hare sends an
utomatically op
s the scale of t
e OptimizatioemoteCall duri
launches and
n displays the
enables the VO
hare plays the
gs let’s you ch
s recording the
e recording at
es the session
hts reserved. (
provides quicrolling througse of Remote
RemoteCall (
ew session w
takes control
e real-time loca
ections of the
ative to draw o
oth the remote
you to customuare, elliptical
apshots of the
/from the remo
nd receives the
pens the web
the RemoteCa
n let’s you impng the sessio
synchronizes
local desktop
OIP feature all
e audio from th
hange audio b
e active sessio
saves it to the
recording and
(http://www.r
ck access togh multiple meCall’s many
(Standard, P
indow within R
of the remote
ation of the re
remote user’s
on the remote
e user and rep
mize your draw
, and text. Yo
remote deskto
ote PC. Sent f
e clipboard co
browser and d
all Viewer win
prove sessionn.
s the remote b
to the remote
lowing the rep
he remote PC
bit-rate setting
on.
e hard drive.
d can be resum
remotecall.net
many of themenus, you cy features.
Pro, or Server
RemoteCall an
e PC’s keyboa
mote user’s m
s desktop, usin
desktop in re
presentative to
wings on the reu can also cha
op that can be
files will be sa
ontents such a
designated UR
dow in sizes o
performance
browser with yo
e user for dem
presentative an
on the local P
s in RemoteC
med at any tim
Re
t)
e RemoteCalcan simply cli
r) your applic
nd can suppor
ard and mouse
mouse cursor.
ng a dot or arr
al time.
o draw on the
emote desktopange the color
e saved to a jp
aved in “My Do
as files, text an
RL on the rem
of 50%, 60%,
by optimizing
our own for co
onstration pur
nd customer to
PC’s speakers
Call to optimize
me.
emoteCall 4.0
l commandsick on an ico
cation may c
rt multiple ses
e.
row.
remote deskto
p. You can chor and weight, a
pg file.
ocuments/RCt
nd images, to
mote desktop.
70%, 80%, 90
g connection a
ooperative bro
rposes.
o speak to ea
s.
e sound qualit
0 User Guide
Page 8 of 22
s found in theon to use that
contain
sion windows
op.
oose freehandand erase or
temp/”
and from the
0% and 100%
and display
owsing.
ch other.
y.
e
2
e t
.
d,
.
RSUPPOR
The Rem
Connec
New Se
DisconConnecInforma
Setting
Rebootand ReExit
View
Full Scr
WindowFit Sidebar
Toolbar
Status RemoteRemoteViewer Open SFolder Next Previou
Tools AlwaysTools
RT CO, Ltd. ©
moteCall VieConnectionView – ScreTools – TooHelp – Help
ction
ession
nect ction ation
s
t Remote connect
reen
w-Scale to
rs
rs
Bar eCall Player eCall Log
Shared
us
s on top
©2007. All righ
wer interfacen – Session meen size optiols and sessio and Informa
Use the Coconfigure dOpens a nesessions ruspecificationDisconnectsDisplays relconnection version. Configures method, locReboots thewindows paExits and cl
Use the Viefeatures. Maximizes ttop of the scFull Screen Scales the i
Displays/hid• Sh• Re• Re• Re• Sc• Cli• Te
Displays/hid• Ba• Ad• Dr• Re• Au
Displays/hidPlays back Lists the Reinformation,Opens the s
Moves to neMoves to pr
Use the ToPlaces the RAccess to R
hts reserved. (
e includes thmanagementons, toolbar/ion settingsation about R
onnection medefault Remoew session winnning simultanns) s the selectedlevant informamethod (Gate
the default secal display sette remote PC aassword if requoses Remote
ew menu to c
the RemoteCacreen while in icon or pressimage of the r
des the sidebahortcuts emote Diagnosemote Processeport creen Captureipboard xt Chat des sections oasic Toolbar dvanced Toolbrawing Toolbarecording Toolbudio Toolbar des the statussession recor
emoteCall View, action historyshared folder
ext session wirevious sessio
ools menu to RemoteCall V
RemoteCall’s s
(http://www.r
e following mt and applicainterface sett
RemoteCall
enu to start a oteCall Viewendow within Rneously. (depe
d session. ation about theeway or P2P),
ettings for Remtings and PIN and reconnectuired. Call Viewer.
configure Rem
all session win full screen m the Esc key.
remote deskto
ars in the Rem
stics ses
of the toolbar a
bar r bar
bar at the bot
rdings recordewer session hy, and chat hison the remote
indow. on window.
select a specViewer windowsupport tools a
remotecall.net
menus: ation settingstings, and th
new sessionr settings. emoteCall Vieending on you
e current sesstotal session
moteCall such code settings
ts automatical
moteCall’s sc
ndow to full scode. To return
op to fit within t
moteCall:
at the top of R
ttom of the seed by RemoteCistory over thestory. e PC that cont
cific RemoteCw on top of othand functions:
Re
t)
s e RemoteCa
n, disconnect
ewer. RemoteCur subscription
ion, such as, ctime, and rem
as connections. ly; however th
creen size and
creen. A quick n to a resizabl
the session w
RemoteCall Vie
ession windowCall Viewer.e past 7 days,
ains transferre
Call support ter windows.
emoteCall 4.0
all Log Viewe
an existing s
Call can suppn level and PC
connection stamote PC name
n method, data
he user must e
d user interfa
menu is availe viewer wind
window.
ewer:
w.
as well as sy
ed files.
tool or functio
0 User Guide
Page 9 of 22
er
session or
ort multiple C
atus, e, IP, and OS
a transfer
enter their
ace
lable at the dow, click the
ystem
on.
e
2
RSUPPOR
Remot
Once co
From heand key‘Mouse/files, che
Draw
Chat
Process
File Tra
Open S
Install R
Disconn
RT CO, Ltd. ©
te User Ap
onnected, the
ere, the remoyboard by pKeyboard Coeck system i
s/System Inf
nsfer
hared Folde
Remote Prin
nect Sessio
©2007. All righ
pplet
e Session St
ote user canpressing ‘Ctrontrol’ icon. nformation, a
formation
er
nter Driver
n
hts reserved. (
atus Window
disconnect l + Alt + SBy right clickand install a
Acton ActwithDisas wOpetranOperepInstprinDis
(http://www.r
w should app
the session,hift’; the repking on the wremote print
tivates the othe screen
tivates the livh the represeplays the remwell as all ruens the file trnsfer a file toens the localresentative atalls a remotnt from the reconnects the
remotecall.net
pear on the re
, or suspendpresentative window, the ter driver.
online drawiin real-time
ve chat windoentative mote PC’s synning procesransfer dialo
o the represel folder wherare stored e printer drivemote PC dire current ses
Re
t)
emote deskto
d representatmay regainremote user
ing feature a
ow allowing y
ystem and hasses
ogue, allowingentative’s PCre files transf
ver enabling rectly to theirssion
emoteCall 4.0
P
op.
tive control on control by r can draw, c
allowing yo
you to comm
ardware spe
g the remote
ferred by the
the represenr local printer
0 User Guide
Page 10 of 22
of the mouseclicking the
chat, transfer
u to draw
municate
cifications
e user to
ntative to r
e
2
e e r
RSUPPOR
Getting
This secestablishManual
Web Ic
1. Launauto
2. Entelogin
3. The codehttpthemprev
4. Instr(Win
5. The Scresess
6. Oncrem“Sup
7. To eclos
SessioTo haveremote prompte
ManuaIf the remmanually1. On t2. Type
the ‘http
3. Click4. Dou
RT CO, Ltd. ©
g Connec
ction explainsh a connectioClient Conn
on Connec
nch Remoteomatically cher your Usern next time, c
Waiting 1 e (if appl://rsup.net/rsm click the vious sectionruct the remndows XP SP
remote useeen Name bsion will begice the conneote PC nampporting…” wend the Sese the sessio
n Code Coe the remoteuser to acce
ed to enter th
l Client Comote user is y download athe “Preparee the supporsame as th
p://www.rsupk ‘Refresh’ a
uble-click the
©2007. All righ
ted
s how to conon with a remnection), as
ction - http
eCall Viewereck for an apr ID and Pascheck the Satab showingicable) will
support). Dirremote sup
n). mote user tP2/Vista). er should seebelow. Instruin. ection is ma
me; the remowill be displayssion, click Dn tab.
onnection - e user conness http://rs
he session co
nnection unable to inand run the Re” page, clicrt company nhe Relay Pa.net/rsupport
and a numbeicon to start
hts reserved. (
nnect with a rmote user. (Wwell you can
://rsup.net/
r on your lopplication upssword, andave Passwog the addresl appear rect the remoport link on
to accept t
e a numbereuct them to
ade, the Waote desktop yed in the boDisconnect
http://rsupect using a sup.net (noode and click
stall the ActiRemoteCall k the availabname in ‘Reage URL. Ft’ then the Rered icon shot the remote
(http://www.r
remote a PCWeb Icon Con connect wit
/RemoteCa
cal PC. Rempdate.d then click rd box.
ss of your Rin Remoteote user to t your web
he ActiveX
ed icon on thclick this ic
aiting 1 tabwallpaper w
ottom right offrom the C
p.net session cod
t http://rsupk Connect.
veX control tClient.
ble link and remoteCall IDor example,emoteCall IDuld appear insession
remotecall.net
. RemoteCaonnection, Sth multiple us
all ID
moteCall Vie Log in. To
Relay Page aeCall Viewehis address,site (created
Control ins
he screen, wcon and the
b will changwill be disablf the screen.
Connection
de, follow thp.net/Remot
they can
un the appleD’. This shou, if the relay
D is ‘rsupportn the applet
Re
t)
ll offers threeSession Codsers simultan
ewer will
simplify
and PIN er (e.g. or have d in the
stallation
with your e remote
e to the led and menu or
he same steteCall ID). T
et uld be y web paget’ window
emoteCall 4.0
P
e simple wayde Connectineously.
eps above bThe remote
e is
0 User Guide
Page 11 of 22
ys to on, and
ut direct theuser will be
e
2
e e
RSUPPOR
ConnecRemoteconnect the follow
1.
2.
3.
4.
5.
ControWhen thPC screKeyboar
Note: Dwindowsdisconne
Virus SThe remthe remremove
RT CO, Ltd. ©
cting MultiCall allows ywith anothe
wing: Repeat stepremote userTo add anotclick New Sewill appear. Opening anappear on yoDirect the nclick the newTo end the close the se
olling the he support seeen. From Rrd/Mouse Co
During the ss until the sect the suppo
Scanning mote user hasmote session
any identifie
©2007. All righ
ple Users Syou to supp
er remote use
ps 1-5 from r. ther session,ession from
additional sour relay we
new remote w connectionSession, clicssion tab.
Remote Pession starts
RemoteCall Vontrol , Dr
session, two session is ovort session.
s the option . Once the d threats.
hts reserved. (
Simultaneoport multiple er if you are
the previous
click the Ne the Connec
session caubpage. user to you
n icon. ck Disconne
PC s, both the loViewer you raw , and
windows wver. If you (
of running aconnection
(http://www.r
ously remote usealready eng
s section to
ew Session ction menu).
ses a secon
r relay webp
ect from the
ocal user andcan then cliFile Transfer
will pop-up o(or the remo
a full virus, sphas been e
remotecall.net
ers simultanegaged in a se
connect wit
icon on the t. A new tab, W
nd connectio
page, and h
Connection
d the remote ck on itemsr .
on the remoote user) clo
pyware, andestablished,
Re
t)
eously. To ession, do
th the first
toolbar (or Waiting 2
on icon to
have them
n menu or
user will shas needed fro
ote screen. Dose one of t
adware scathe user ca
emoteCall 4.0
P
are control oom the Toolb
Do not closthese windo
an on their syn run the fu
0 User Guide
Page 12 of 22
of the remotebar, such as
e these twoows, you wil
ystem duringull scan and
e
2
e s
o l
g d
RSUPPOR
EndingThe rema sessiorepresenimpossib From thYou can From thCustome‘Current
RT CO, Ltd. ©
g the Sessmote session on summaryntative’s namble to reconn
he Local PC n end the ses
he Remote Pers can endly Supporting
©2007. All righ
sion can be end
y page will me and connect to the cu
ssion by sele
PC d the supporg’ window, o
hts reserved. (
ed by either appear on
ntact informaustomer’s co
ecting ‘Discon
rt session onr by closing
(http://www.r
user at any the remote
ation. Once omputer with
nnect’ from t
n the remotthe window.
remotecall.net
time. After dPC screen
the sessionout starting a
he main men
e PC by clic
Re
t)
disconnectin detailing th is over, ita new sessio
nu or by clos
cking the ‘D
emoteCall 4.0
P
g, he is
on.
sing the supp
Disconnect’ b
0 User Guide
Page 13 of 22
port window.
button in the
e
2
e
RSUPPOR
SetThis seperform SettingThe Deftime youmenu CSession Server AuthentValidateRemoteThe defayour ow
Enablingencryptio Proxy SIf you usID, and Remote Note: Fo NetworNAT (NeIf the locserver. Tconnect Support
Note: YoIP addre
RT CO, Ltd. ©
ttings ection disc
mance, and
gs fault Settingsu start a new
Connection n.
tication Serves the loginCall will autoault settingsn server (e.g
Server AddrPort: 80 Authenticatio
g “Use SSL on.
Server se a proxy sePassword. ICall try and f
or remote PC
rk etwork Addrcal PC is beTo improve p
as a P2P ’ and enter th
External IP AExternal Por
ou may needess.
©2007. All righ
and cusses the security set
s window is w session. Yo> Settings.
ver n ID and pomatically co
s shown belog. RemoteCa
ress: rsup.ne
on Page: vie
Encryption”
erver in yourf you are nofind the prox
Cs behind a
ress Translaehind a firewperformance
while connhe external I
Address: Thert: The port b
d to configur
hts reserved. (
Sessuse of R
ttings.
used to conou can acce The Gener
password wonnect to theow do not reall Server Edi
et
ewer_check a
will secure a
r network forot sure of thexy server for y
proxy, you d
ator) Suppowall, the sesse, you can mnecting throuP and port o
e local PC’s being forward
re the local fi
(http://www.r
ion MemoteCall’s
nfigure defauess General Sral Settings
when signinge server andequire changition)
asp
all data trans
r security, yoe proxy addryou.
do not need t
ort sion will be canually confugh a firewa
of the local PC
public IP addded to the loc
irewall to red
remotecall.net
Manags settings
ult RemoteCaSettings fromwindow has
g in. After d update thege unless yo
smitted with
u can manuaress and por
to enable the
connected vfigure the NAall. Check ‘C.
dress cal PC
direct the po
Re
t)
gemewhere you
all settings wm the Log-Ins three tabs
signing in,e application.ou’re running
128-bit SSL
ally enter thert you can cl
e proxy settin
via a gatewaAT settings to‘Enable NAT
rt to the loca
emoteCall 4.0
P
ent u can cha
which will ben window or : Server, Ne
, .
g
L
e Proxy IP adlick ‘Auto de
ngs.
y o T
al
0 User Guide
Page 14 of 22
nge visual
e used everyby using theetwork, and
ddress, Portetect’ to have
e
2
,
y e d
, e
RSUPPOR
PIN CodTo prevecharacte
SessioThis will be useduse andthese seSettings
Note: Re(Gatewa
RemoteSelect S
ConnecConnectinternet Modem/
Color decolors, 1
SessionSessionuser is odisconne
Start ReEnabling
RT CO, Ltd. ©
de ent unauthorers in length,
n configure th during each the remote
ettings durings” on the next
emoteCall wiay/P2P).
e ConnectionSmall, Medium
ction Optiontion configurespeed. You /Satellite sett
Transfer Mo• In A
for t• GDI
situa• Driv
VRV
epth changes16 colors, 4 c
n Manageme managemen
on Dial-up orections in the
ecording ong this option
©2007. All righ
rized access and can be
he default peh session. Deuser’s netwog each sessiot page).
will automatica
n Web Pagem or Large te
ns es how data can choose tings depend
ode configureAutomatic Mhe remote PI Mode transations when ver Mode usVD uses less
s the color recolors, or 2 c
ent nt is used in r in a networkese environm
n Session Stwill automat
hts reserved. (
, check the ‘Egenerated a
rformance seepending on ork environmon for optimi
ally detect th
e ext size for t
is transmittefrom LAN10
ding on the re
es how imageMode, RemotPC’s configurasmits the enyou are unases the VRV
s CPU and m
esolution dispcolors. For hi
order to maik with an unsments.
tart ically start a
(http://www.r
Enable PIN-cautomatically
ettings for Rewhat applicaent, you canzed perform
he connection
he Relay Pa
ed based on /100MB, ISDemote user’s
e data is tranteCall will auation.
ntire screen ble to load thVD for optim
memory than
played on thegh quality dis
intain a connstable conne
session reco
remotecall.net
code’ box. Ty or manually
emoteCall Vations you wan manually adance (see “S
n method
ge.
the remote uDN/DSL/cabls bandwidth.
nsmitted fromutomatically
image at onhe VRVD.
mized performGDI mode.
e local PC. Ysplay, high s
nection in unsection, enabli
ording every
Re
t)
he PIN-codey.
iewer to ant to djust Session
user’s e, or
m the remoteselect the tr
e time. This
mance. Run
You can choospeed Interne
stable netwong this optio
time a new
emoteCall 4.0
P
e must be 4 n
e PC. ransfer mode
s should only
ning at the
ose from Truet access is
ork environmon will preven
session is st
0 User Guide
Page 15 of 22
numeric
e best suited
y be used in
kernel level
ue Color, 256required.
ents. If the nt
tarted.
e
2
d
n
,
6
RSUPPOR
PerforOnce a active sOptimizconnect GeneraShared Change location Docume RemoteChange Local DChange Note: Lo
Auto Scr
Panningthe scre Game SEnabling
RT CO, Ltd. ©
rmance Opsession is la
session by czation. Hereion method o
al Folder the location is “C:\Docum
ents\RSUPPO
e Display the remote P
Display the display c
owering the d
roll will pan t
g Scroll is a cen.
Support g either of the
©2007. All righ
ptimizationaunched, the clicking the e you may or Shared Fo
of the Sharements and SORT\Remote
PC’s display
color depth idisplayed col
AdNeSeMo TrSeNode ScSe
the screen au
click and drag
ese features
hts reserved. (
n default settiCustomizatadjust settin
older location
ed Folder toettings\UsereCall Viewer
y resolution a
n RemoteCalor depth will
dvanced etwork Typeelect the netwodem/Satellit
ransfer Modelect the dispote: Driver mepending on
creen Scrollelect the scre
utomatically,
g method of
s will allow re
(http://www.r
ngs are enaion icon ngs to boosn.
o be used in fr Name\My r\SharedFold
and color dep
all Viewer. l increase pe
e work connecte) according
e play driver to
mode offers ththe remote P
een scrolling
, when the cu
scrolling, wh
emote access
remotecall.net
bled. You ca or by using
st performan
file transfers
der”.
pth.
erformance.
tion type (LAg to the remo
be used (Auhe best perfoPC’s settings
functions in
ursor reache
here you can
s in online ga
Re
t)
an however mg the menu nce or disp
. Default
AN, ISDN/DSote user’s ba
uto Detect, Gormance, buts.
the Remote
es the edge o
hold down t
aming enviro
emoteCall 4.0
P
make change Tools > Play quality,
SL/Cable, or andwidth.
GDI Mode, Dt may not be
Call session
of the screen
the mouse bu
onments.
0 User Guide
Page 16 of 22
es during thePerformance
change the
river Mode).available
window.
n.
utton to pan
e
2
e e e
RSUPPOR
Audio Quality Adjust arate (kbpfrequenc
VolumeAdjust th
Share REnable ovolume
Examp
Best PeIt is possadjusting For the b
For LowRemotemodem
using ththe settisettings:
For GraIf you nelearning
RT CO, Ltd. ©
audio quality ps) and frequcy range will
e he microphon
Remote PC Sor disable thelevel.
ple of Sess
erformance sible to watcg the followin
best respons
Conne Transf Color d
w Speed InteCall can suor a 2-way
e ‘Default Sngs after the:
Conne Transf Color d
aphic and Mueed to suppo, we recomm
Conne Transf Color d
©2007. All righ
settings for Vuency range increase pe
ne and spea
Sound e sharing of
sion Setti
ch multimediang settings fo
se time
ection: High Sfer mode: VRdepth: 2 Colo
ernet pport customsatellite for
ettings’ mene session ha
ection: Low Sfer mode: VRdepth: 2 Colo
ultimedia Fiort users withmend adjustin
ection: High Sfer mode: VRdepth: 16 bits
hts reserved. (
VOIP and Re(kHz). Redurformance b
ker level of b
the Remote
ngs
a files locatedor the best p
Speed netwoRVD Mode ors
mers with loInternet acc
nu. Also, yous started. Fo
Speed netwoRVD Mode ors
iles h graphic or mng the follow
Speed netwoRVD Mode s
(http://www.r
emote PC Soucing the bit-ut lower aud
both the rem
PC audio an
d on the remossible perfo
ork
ow-speed Intcess. Before
u can click thor low speed
rk
multimedia inwing settings
ork
remotecall.net
ound, such arate and/or io quality.
ote and loca
nd adjust the
mote PC with ormance:
For the best
ternet accesconnecting
he ‘Optimize networks w
ntensive appfor the best d
Re
t)
as bit-
al PCs.
RemoteCall
t display qua
ConnectioTransfer mColor dept
ss—even thoyou may ad
’ button on twe recommen
lications sucdisplay quali
emoteCall 4.0
P
Viewer. We
lity
n: High Speemode: VRVD th: 16-bit
ose using a djust the def
the Toolbar nd adjusting
ch as CAD orty and respo
0 User Guide
Page 17 of 22
e recommend
ed network Mode
56K dial-upfault settings
to adjustthe following
r online onse time:
e
2
d
p s
t g
RSUPPOR
AdmThis seAdmin Login IDview se Active The actiYou canabout th SessioThe sesspecifiedname orincluding StatistiOne of tand canmonth, d Year dis Month d Day bresessionsoccurred User dissessions Session5-10 min OS Use Reasonsessions
RT CO, Ltd. ©
min Cection explaCenter, visiD and pass
ession statis
Connectioive connection search for e user such
n Log ssion log tab d dates. Your ID. Clickingg PC, custom
ics the most imp be exportedday, or speci
splays the nu
displays the n
eaks down ts were handd between 17
splays the ns per week o
n Length disnutes, 10-15
d displays w
n for Call dis were email
©2007. All righ
Centeains the usit www.rem
sword. Oncestics and se
ons ons tab lists users by thas their loca
lists the sesu can searchg a user ID dmer, and con
portant featud to excel fileific user), ‘se
umber of ses
number of se
the sessionsdled during a7:00 and 18:
number of seor per month)
splays the avminutes and
which operatin
isplays the nl issues, 10 s
hts reserved. (
r se of Remotecall.nete logged in
ession logs,
all logged inheir screen nal and public
ssion history h for individudisplays detannection infor
ures of the Aes for reportiession length
sions for eac
essions for e
s into hourlya set period 00 this mont
essions hand)
verage lengthd so on)
ng system w
number of ssessions wer
(http://www.r
oteCall’s oand click “L you will haas well as a
n representaname or ID. IP address,
of all represual represenailed informarmation.
Admin Centeng and back’, ‘OS Used’
ch month of t
each day of th
y statistics. of time. (e.
th)
dled by each
h of sessions
was used on t
sessions thare instruction
remotecall.net
nline admiLogin” fromave the abiladminister
atives either Clicking a uPC name, lo
sentatives bentatives by thation about th
r; user and kup purposes, and ‘Reaso
the year.
he month.
Displaying g. how man
h user for a
s. The sessio
the remote P
t were handnal and so on
Re
t)
nistration c the main mlity to monituser setting
supporting ouser ID displogin time and
etween two heir screen he session,
session stats. You can von for Call’ st
how many ny sessions
set period
ons are grou
PC.
dled for a spn)
emoteCall 4.0
P
center. To menu and ttor active cgs and perm
or waiting folays detailedd more.
istics are disiew call volutatistics.
of time. (e.g
uped into tim
pecific proble
0 User Guide
Page 18 of 22
access thetype in youronnections
missions.
r customersd information
splayed hereme (by year
g. how many
eframes (i.e
em. (e.g. 25
e
2
e r ,
. n
e ,
y
.
5
RSUPPOR
User SeHere yopassworand suband ena Remotecategory(Primarycategoriwish to rcontrol g
Primaryremote Ptransferrthe mac
Secondanythingthe scre
Passivesoftware
RT CO, Ltd. ©
ettings u can view ard, and detaiscription term
able/disable f
Call’s user sy. Control funy, Secondaryes gives the restrict the usgroups.
y Control is uPC, such as ring files, acchine.
dary Controlg directly. Seen in real-tim
e Control is ue), taking scr
Key
Mo
Reb
File
Re
UR
Co
Sh
©2007. All righ
and update als (name, phm). You can features of R
ettings includnctions are sy, and Passivuser full accser’s access
used when yusing the mo
cessing remo
is used wheecondary conme, or use a
used for monreen captures
Primary
yboard Contr
use Control
boot and Rec
e Transfer
emote Proces
RL Push
o-Browser
hortcuts
hts reserved. (
ccount informhone numberset individua
RemoteCall V
de both a cosplit into threeve). Enablingcess to the res, you can de
you need full ouse and keote processe
en you need ntrol allows thlaser pointin
nitoring the rs or recordin
rol
connect
ss Control
(http://www.r
mation such r, email, addral permissionViewer.
ontrol and sece groups g all three coemote PC. If eselect any o
control of thyboard,
es, or rebooti
to interact whe user to chg device to g
remote PC, bng the sessio
CoSecond
Text Cha
Voice Ch
Draw
Interactiv
Laser Po
Clipboard
Presentat
Windows
remotecall.net
as ress, ns,
curity
ntrol you
of the
e
ing
with the remothat with the cguide them.
by viewing syon to disk.
ontrol dary
t
at
ve Draw
inter
d Sharing
tion
Blind
Re
t)
te PC, but docustomer usin
ystem inform
Pass
Remote D
Screen C
Session R
Reporting
emoteCall 4.0
P
on’t need to ng voice or t
ation (hardw
sive
Diagnostics
Capture
Recording
g
0 User Guide
Page 19 of 22
control ext, draw on
ware /
e
2
n
RemoteCall 4.0 User Guide
RSUPPORT CO, Ltd. ©2007. All rights reserved. (http://www.remotecall.net) Page 20 of 22
Security settings are used to adjust the permissions required from the customer to gain access to their system. Enabling all of these functions will maximize the customer’s level of security during the remote session.
Reason for Call Here you can add/remove various reasons for calling, and change their priority settings. This list is utilized in the reporting form during a session. The representative may choose any one of these reasons from a drop down list to document the reason for the call. Priority settings determine the order in which the reasons show up in the list. (e.g. priority 1 would be first in the list) Web Viewer Launch RemoteCall from anywhere. This page allows you to login and launch the RemoteCall Viewer via the web without the need to install the program on the system. Notices This section posts recent news and updates regarding the RemoteCall application such as newly added features and enhancements. Account Information This section displays the user’s account information including their password, name, phone number, email, country, and address. To edit/update this information, click the ‘Edit’ button at the bottom, once finished click the ‘OK’ button.
Security
Permission for Connecting
Prompts the remote user to accept or deny the remote connection.
Permission for Mouse/Keyboard Control
Prompts the remote user to accept or deny the representative, control over their mouse/keyboard.
Permission for File Transfers
Prompts the remote user to accept or deny a file transfer.
PIN-Code Each session must have a PIN code to establish a connection.
Application Sharing The user must authorize the use of each application before the representative has access. The remote user can select individual programs or open their entire desktop to the representative.
Application Blocking The user may select individual programs to block from the representative.
Password Blocking Covers the password box with a black bar preventing the representative from seeing the password.
Prevent Password Entry Prevents the representative from entering passwords on the remote PC.
Display Session Summary
Generates a session summary page to be displayed to the remote user upon disconnection.
RemoteCall 4.0 User Guide
RSUPPORT CO, Ltd. ©2007. All rights reserved. (http://www.remotecall.net) Page 21 of 22
RemoteCall FAQs General 1. How does it work?
- A remote user visits a designated support URL where they can click a numbered icon to connect with a representative. 2. Does I need to pre-install software on the remote user’s PC?
‐ No, there is no need for pre-installed software. 3. Is RemoteCall safe?
‐ Yes, RemoteCall uses both 256 bit AES and industry standard SSL encryption for all transmitted data. ‐ User authorization is required before a connection can be established.
4. Can I connect to a remote PC behind a firewall or proxy? ‐ Yes, RemoteCall works transparently through any firewall or proxy without the need to change your existing network
settings. 5. Can I host multiple sessions simultaneously?
‐ Yes, RemoteCall Viewer can support multiple sessions simultaneously from within one window. 6. Can I transfer files to and from the remote PC?
‐ Yes, RemoteCall supports file transfers of any type, to and from the remote PC. 7. How does the remote user know when they are connected?
‐ A dialogue box appears on the screen notifying the remote user that a connection has been established.. ‐ “Supporting…” is displayed in the bottom right corner of the screen during the remote session. ‐ The remote user’s wallpaper is temporarily disabled and replaced with a black background.
8. Can the Remote sessions be recorded? ‐ Yes, each session can be recorded at any time. The recordings can be viewed at a later time using the RemoteCall Player.
Support 1. Why didn’t the remote PC reconnect after a system reboot?
‐ If the remote PC requires a login password, the user must input the password before a connection can be re-established. ‐ If the remote PC requires a manual connection to the internet, the remote user must re-establish the internet connection
and then refresh the Relay Page. 2. Why can’t I enter a password on the remote PC?
‐ This is done intentionally for security reasons. In the ‘User Settings’ options, you may restrict the entry of passwords by the representative.
3. Where are the received files and screen captures saved? ‐ The files are stored in your Documents folder under RSUPPORT\RemoteCall Viewer in their respective folders.
However the default locations can be changed if needed. 4. Can the remote user still connect if they don’t install the ActiveX controls?
‐ Yes, the remote user has the option of downloading and running the RemoteCall client manually, if they cannot install the ActiveX controls.
5. Can the remote user control the representative’s desktop in presentation mode? ‐ No, the remote user has no control capability. The presentation mode is used solely for displaying the representative’s
desktop to the remote user. 6. Why can’t I see some applications on the customers desktop?
‐ The remote user may have blocked the program from being viewed for security reasons. 7. Why can’t I switch to VRVD Mode?
‐ If you are unable to change the Image Transfer Mode to VRVD mode, you need to manually remove the Virtual Video Driver from the remote PC Windows Device Manager and then reboot and reconnect to the Relay web Page. It will then revert to the Virtual Remote Video Driver automatically.
8. Why does the connection drop after only a few seconds? ‐ This is caused if the network requires SSL authentication. Enable SSL encryption in the settings window.
9. Why does the connection fail on the “Preparing” page? ‐ You may not have sufficient privileges to install ActiveX components. ‐ The ActiveX components may be corrupted. ‐ If you are running Firefox or Opera you cannot use the ActiveX components.
RemoteCall 4.0 User Guide
RSUPPORT CO, Ltd. ©2007. All rights reserved. (http://www.remotecall.net) Page 22 of 22
Contact Information RSUPPORT Co., Ltd. www.remotecall.net Technical Support: +82 70 7011-0590, [email protected] Sales: [email protected]
Index Active Connections, 17 Admin Center, 17 AES, 3 API, 2 Authentication Server, 13 Benefits, 2 Clipboard Share, 7 Co-Browser, 7 Company ID, 2 Connection, 8 Control, 13 Control Type, 15 Customize, 7 disconnecting, 12 Draw, 7 Driver Mode, 14 Ending the Session, 12 FAQ, 20 File transfer, 7 Game Support, 15 GDI, 2 GDI Mode, 14 Interactive Draw, 7 Interface, 6 Keyboard/Mouse Control, 7
Laser Pointer, 7 Local PC, 2 Main Menu, 7 Manual Client, 10 Mouse Chase, 7 NAT, 13 Network Type, 15 New Session, 7 Notices, 19 Passive Control, 18 Pause, 7 PC Sound Share, 7 Performance, 16 Permissions, 2 PIN Code, 14 Presentation, 7 Primary Control, 18 Proxy Server, 13 Reason for Call, 17 Record, 7 Relay Page, 2, 5 Remote PC, 2 Remote User, 2 RemoteCall Viewer, 2 Representative, 2 Screen Capture, 7 Screen Name, 2 Screen Scroll, 15
Secondary Control, 18 Security, 19 Session, 2 Session Code, 2, 10 Session Length, 17 Session Log, 17 Session Management, 14 Session Settings, 15 Settings, 13 Shared Folders, 15 SSL, 3 Statistics, 17 Stop, 7 Toolbar, 7 Tools, 8 URL Push, 7 User ID, 2 User Settings, 18 View, 8 Virus Scanning, 11 Voice, 16 Voice Chat, 7 Volume, 16 VRVD, 2 Web Icon, 10 Web Viewer, 19 Zoom, 7