Upload
clef-gonadan
View
216
Download
0
Embed Size (px)
Citation preview
8/12/2019 rs_4300
1/2
MODEL RS-4300C/S 4(101.6 mm) STORM RESISTANT FIXED HORIZONTAL LOUVER
DESIGN DATA:
To maintain a CLASS A (99%) effectiveness ratingwith a 29 mph wind speed and a rainfall rate of 3in/hr
Maximum intake core velocity 0.5 m/s (98.43 FPM)
Maximum intake free area velocity 0.96 m/s (189.23 FPM)
Intake pressure drop 2.8 Pa (0.01 in. H2
Intake capacity 0.5 mO)
3
/s (1059 CFM)
To maintain a CLASS B (95%) effectivenessrating
with a 29 mph wind speed and a rainfall rate of 3in/hr
Maximum intake core velocity 1.6 m/s (315 FPM)
Maximum intake free area velocity 3.1 m/s (610.27 FPM)
Intake pressure drop 29.9 Pa (0.12 in. H2
Intake capacity 1.6 m
O)3
/s (3433 CFM)
*louver tested with 1m2
core area, mill finish and no screen
SUGGESTED SPECIFICATIONS:
GENERAL: Furnish and install where indicated on the drawings C/S 4(101.6 mm) STORMRESISTANT FIXED HORIZONTAL LOUVER MODEL RS-4300 as manufactured byConstruction Specialties, Inc., Cranford, NJ; Mississauga, Ontario. Complete details shall be
submitted to the architect for approval prior to fabrication. The supplier must be a member ofAMCA or BSRIA.
MATERIAL: Frames and blades to be fabricated from 6063-T6 aluminum alloy. Blades to be
minimum 0.060 (1.52 mm) thick extrusions and frames to be a minimum 0.080 (2.03 mm)
thick. Louver to be mechanically fastened using stainless steel or aluminum fasteners. Louvers to
be supplied with 4 (101.6 mm) high by full depth sill flashing formed from minimum 0.050 (1.27 mm) thick aluminum. Sill flashing to have welded side panels. Louvers and sill flashing to
be installed in accordance with the manufacturers recommended procedures to ensure complete
water integrity performance of louver system. Louvers to be furnished with (12.7 mm) mesh
screen secured within a 12 B & S gauge extruded aluminum frame.
STRUCTURAL DESIGN: Structural supports shall be designed and furnished by the louvermanufacturer to carry a wind load of not less than ________psf. (kPa). (Note: If this paragraph is
omitted or if the design wind load is not specified, the louvers will be manufactured in selfsupporting units up to a maximum of 5 (1524 mm) wide by 8(2438 mm) high. Any additional
structural supports required to adequately secure these units within the opening shall be theresponsibility of others.)
FINISH:All louvers shall be finished with C/S Powder Coat, a coating to be 1.5 to 3 mil. thickfull strength100% resin Fluoropolymer coating. Finish to allow zero VOCs to be emitted intofacility of application. Finish to adhere to a 4H Hardness rating. All finishing procedures shall beone continuous operation in the plant of the manufacturer. The coating shall meet or exceed all
requirements of AAMA specification 2605-5 Voluntary Specification for High PerformanceOrganic Coatings on Architectural extrusions and Panels. The louver manufacturer shall supplyan industry standard 20-year limited warranty against failure or excessive fading of theFluoropolymer Powder Coat finish. This limited warranty shall begin on the date of material
shipment.
WIND DRIVEN RAIN PERFORMANCE:
The louver test was based on a 39.370 (1.00 m) x 39.370(1.00 m) core area unit tested at a
rainfall rate of 3per hour (75 mm/hr) and with a wind directed to the face of the louver at a
velocity 29.1-mph (13 m/s). The test data shall show the water penetration effectiveness rating ateach corresponding ventilation rate.
Core Ventilation Rate (m/s): 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
Core Ventilation Rate (ft/min): 0 98 197 295 394 492 591 689
Free Area Ventilation Rate (ft/min): 0 188 379 567 757 946 1135 1324
Rating Effectiveness: A A B B C C D D
Effectiveness Rating: A = 1 to 0. 99 B= 0.989 to 0.95 C = 0.949 to 0.80 D = 0.80 to 0
To download details and specifications visit www.c-sgroup.com. For technical and design assistance call 800-631-7379
SECTION VIEW
SCALE: 1-1/2" = 1'
PLAN VIEW
FLASHINGSILL
STORMBLADE
MULLIONJAMB
HEAD
8/12/2019 rs_4300
2/2
For a 48 X 48 sized louver
12 18 24 30 36 42 48 54 60 66
0.30 0.46 0.61 0.76 0.91 1.07 1.22 1.37 1.52 1.68
18 0.40 0.69 0.98 1.27 1.55 1.84 2.13 2.42 2.71 3.00
0.46 0.04 0.06 0.09 0.12 0.14 0.17 0.20 0.23 0.25 0.28
24 0.60 1.03 1.46 1.90 2.33 2.76 3.20 3.63 4.06 4.49
0.61 0.06 0.10 0.14 0.18 0.22 0.26 0.30 0.34 0.38 0.42
30 0.79 1.36 1.93 2.51 3.08 3.65 4.23 4.80 5.37 5.94
0.76 0.07 0.13 0.18 0.23 0.29 0.34 0.39 0.45 0.50 0.55
36 0.99 1.71 2.44 3.16 3.88 4.60 5.33 6.05 6.77 7.49
0.91 0.09 0.16 0.23 0.29 0.36 0.43 0.49 0.56 0.63 0.70
42 1.18 2.04 2.90 3.76 4.62 5.48 6.34 7.20 8.06 8.92
1.07 0.11 0.19 0.27 0.35 0.43 0.51 0.59 0.67 0.75 0.83
48 1.40 2.42 3.44 4.46 5.47 6.49 7.51 8.53 9.55 10.57
1.22 0.13 0.22 0.32 0.41 0.51 0.60 0.70 0.79 0.89 0.98
54 1.61 2.78 3.95 5.12 6.29 7.47 8.64 9.81 10.98 1 2.15
1.37 0.15 0.26 0.37 0.48 0.58 0.69 0.80 0.91 1.02 1.13
60 1.79 3.09 4.39 5.70 7.00 8.30 9.60 10.90 1 2.21 1 3.51
1.52 0.17 0.29 0.41 0.53 0.65 0.77 0.89 1.01 1.13 1.26
66 2.01 3.46 4.92 6.38 7.84 9.30 10.76 12.21 13.67 15.13
1.68 0.19 0.32 0.46 0.59 0.73 0.86 1.00 1.13 1.27 1.41
72 2.20 3.80 5.40 7.00 8.60 10.20 11.80 13.40 15.00 16.60
1.83 0.20 0.35 0.50 0.65 0.80 0.95 1.10 1.24 1.39 1.54
78 2.40 4.15 5.90 7.65 9.39 11.14 12.89 14.64 16.38 18.13
1.98 0.22 0.39 0.55 0.71 0.87 1.04 1.20 1.36 1.52 1.68
84 2 .6 2 4 .52 6 .4 3 8.3 3 10 .2 3 1 2.1 4 1 4.04 15 .9 4 1 7. 85 19 .75
2.13 0.24 0.42 0.60 0.77 0.95 1.13 1.30 1.48 1.66 1.84
90 2 .8 2 4 .87 6 .9 3 8.9 8 11 .0 3 1 3.0 8 1 5.14 17 .1 9 1 9. 24 21 .29
2.29 0.26 0.45 0.64 0.83 1.02 1.22 1.41 1.60 1.79 1.98
96 3 .0 1 5 .20 7 .3 8 9.5 7 11 .7 6 1 3.9 5 1 6.13 18 .3 2 2 0. 51 22 .70
2.44 0.28 0.48 0.69 0.89 1.09 1.30 1.50 1.70 1.91 2.11
10 2 3 .2 2 5 .56 7 .9 0 1 0. 25 12 .5 9 1 4.9 3 1 7.27 19 .6 1 2 1. 95 24 .30
2.59 0.30 0.52 0.73 0.95 1.17 1.39 1.60 1.82 2.04 2.26
10 8 3 .4 1 5 .89 8 .3 7 1 0. 85 13 .3 3 1 5.8 0 1 8.28 20 .7 6 2 3. 24 25 .72
2.74 0.32 0.55 0.78 1.01 1.24 1.47 1.70 1.93 2.16 2.39
11 4 3 .6 2 6 .25 8 .8 9 1 1. 52 14 .1 5 1 6.7 9 1 9.42 22 .0 5 2 4. 68 27 .32
2.90 0.34 0.58 0.83 1.07 1.31 1.56 1.80 2.05 2.29 2.54
12 0 3 .8 4 6 .62 9 .4 1 1 2. 20 14 .9 9 1 7.7 8 2 0.57 23 .3 6 2 6. 15 28 .94
3.05 0.36 0.62 0.87 1.13 1.39 1.65 1.91 2.17 2.43 2.69
12 6 4 .0 3 6 .97 9 .9 0 1 2. 83 15 .7 7 1 8.7 0 2 1.63 24 .5 7 2 7. 50 30 .43
3.20 0.37 0.65 0.92 1.19 1.46 1.74 2.01 2.28 2.55 2.83
1 32 4 .2 3 7 .3 0 1 0. 37 1 3. 44 1 6. 52 1 9. 59 2 2. 66 2 5. 74 2 8. 81 3 1. 88
3.35 0.39 0.68 0.96 1.25 1.53 1.82 2.11 2.39 2.68 2.96
1 38 4 .4 3 7 .6 5 1 0. 87 1 4. 10 1 7. 32 2 0. 54 2 3. 76 2 6. 98 3 0. 21 3 3. 43
3.51 0.41 0.71 1.01 1.31 1.61 1.91 2.21 2.51 2.81 3.11
1 44 4 .6 2 7 .9 8 1 1. 34 1 4. 70 1 8. 06 2 1. 42 2 4. 78 2 8. 13 3 1. 49 3 4. 85
3.66 0.43 0.74 1.05 1.37 1.68 1.99 2.30 2.61 2.93 3.24
1 50 4 .8 4 8 .3 6 1 1. 87 1 5. 39 1 8. 91 2 2. 43 2 5. 95 2 9. 47 3 2. 99 3 6. 50
3.81 0.45 0.78 1.10 1.43 1.76 2.08 2.41 2.74 3.06 3.39
1 56 5 .0 5 8 .7 2 1 2. 39 1 6. 06 1 9. 73 2 3. 40 2 7. 07 3 0. 74 3 4. 42 3 8. 09
3.96 0.47 0.81 1.15 1.49 1.83 2.17 2.52 2.86 3.20 3.54
1 62 5 .2 3 9 .0 3 1 2. 83 1 6. 63 2 0. 44 2 4. 24 2 8. 04 3 1. 84 3 5. 64 3 9. 45
4.11 0.49 0.84 1.19 1.55 1.90 2.25 2.61 2.96 3.31 3.66
1 68 5 .4 4 9 .4 0 1 3. 36 1 7. 32 2 1. 28 2 5. 23 2 9. 19 3 3. 15 3 7. 11 4 1. 07
4.27 0.51 0.87 1.24 1.61 1.98 2.34 2.71 3.08 3.45 3.82
1 74 5 .6 4 9 .7 4 1 3. 84 1 7. 94 2 2. 04 2 6. 14 3 0. 24 3 4. 34 3 8. 44 4 2. 54
4.42 0.52 0.90 1.29 1.67 2.05 2.43 2.81 3.19 3.57 3.95
1 80 5 .8 4 1 0. 09 1 4. 34 1 8. 58 2 2. 83 2 7. 08 3 1. 33 3 5. 57 3 9. 82 4 4. 07
4.57 0.54 0.94 1.33 1.73 2.12 2.52 2.91 3.30 3.70 4.09
1 86 6 .0 6 1 0. 46 1 4. 86 1 9. 27 2 3. 67 2 8. 07 3 2. 48 3 6. 88 4 1. 29 4 5. 694.72 0.56 0.97 1.38 1.79 2.20 2.61 3.02 3.43 3.84 4.24
1 92 6 .2 6 1 0. 81 1 5. 36 1 9. 92 2 4. 47 2 9. 02 3 3. 57 3 8. 13 4 2. 68 4 7. 23
4.88 0.58 1.00 1.43 1.85 2.27 2.70 3.12 3.54 3.97 4.39
1 98 6 .4 5 1 1. 13 1 5. 82 2 0. 51 2 5. 20 2 9. 88 3 4. 57 3 9. 26 4 3. 95 4 8. 63
5.03 0.60 1.03 1.47 1.91 2.34 2.78 3.21 3.65 4.08 4.52
Construction Specialties, Inc.
Manufacturing & Sales Location
www.c-sgroup.com
Cranford, New Jersey49 Meeker Avenue 07016
Telephone: (800) 631-7379
Fax: (908) 272-2920
Mississauga, Ontario895 Lakefront Promenade L5E 2C2
Telephone: (888) 895-8955Fax: (905) 274-6241
A member of the C/S Group of Companies
For assistance with overseas requirements,call C/S International (908) 236-0800
Copyright 2010. Construction Specialties, Inc., reserves the right tomake design changes or to withdraw any design without notice.
PERFORMANCE DATA MODEL RS-4300
Width in Inchesand Meters
HeightinInchesandMeters
Upper Numerals English Units/Lower Numerals Metric Units
Intake
Exhaust