Roundness Cylindrical Profile Measuring Instruments Table ... › file › file-7-21-2015-2-43-38-PM.pdf · Magnification Power consumption Air source Air consumption Installation

266

Roundness

・CylindricalP

rofileM

easuringInstrum

ents/3D

Vision

System

s

Roundness・Cylindrical Profile Measuring Instruments

Table-Rotating Type Roundness・Cylindricity Measuring Instruments 〉〉〉

Working Towards the World’s Standard Machines

Measurement can now be upgraded to CNC control in accor-dance with requests from numerous users. Upgrading to CNCcontrol is amazingly simple and involves no changes to instal-lation space. The measuring machine can be upgraded asrequired in existing installation sites even if the user initiallyinstalled a manual model due to a limited number of measure-ment workpieces.

Upgradable from Manual Type RONDCOM 44 to CNC Type RONDCOM 54 (patent pending)

All-in-one Type RONDCOM 44DXSeparate Type RONDCOM 44SD

* The anti-vibration table, system rack and printer are options.

Rotation accuracy of 0.02±4H/10000μmIn full pursuit of compact high accuracy and high rigidity

Conventional sensor holder Offset type sensor holder

●Conventional roundness measuring machines

●Roundness measuring machines of the future

Manualmachine

RONDCOM 44 RONDCOM 54

CNC machineRenewal

R44SDR44DX

to R54SDto R54DX

Upgrade

CNC

The RONDCOM 44 comes equipped with a newly developed offset type sensor holder as standard. This holder enables measurement without interfer-

ence between the R-axis arm and the workpiece. (Patent pending)

This holder simplifies the measurement of flanged workpieces, workpieces with thick walls between the ID and OD, and deep holes.

New Offset Type Sensor Holder (patent pending)

Nss

Text Box

http://thaimetrology.com/

267

Roundness

・CylindricalP

rofileM

easuringInstrum

ents/3D

Vision

System

s

Operation is quite simple for adjusting the amount of eccentricity and tilt in the XY-axes of theworkpiece shaft center with respect to the center of the rotating shaft. All you have to do is toadjust the displacement position of the bar graph displayed in the alignment adjustment screento the zero position.

Incorporating Outstanding Easy-to-operate Centering/Tilting Support Functions

Two measuring ranges, ±1000 μm and ±200 μm, can be used selectively according to theaccuracy of the workpiece. The ±1000 μm measurement range has a calculation resolution of0.002 μm equivalent to the conventional measurement magnification of 10000X, which allowsit to be used for almost all workpieces.

Wide Range Supported for Infinite Magnification Range

Specifications

Manual

φ300mm

170mm

300mm

φ580mm

OD measurement: 300 mm, ID measurement: 300 mm

(0.02+4H/10,000) μm H: Height from table surface to measuring point (mm)

(0.02+4R/10,000) μm R: Distance from table center of rotation (mm)

0.12μm/100mm, 0.2μm/300mm

0.8μm/150mm

0.8μm/300mm

1.0μm/150mm

(2+L/170) μm L:Drive distance (mm)

2 to 10/min

0.5 to 6mm/s (max. 50mm/s)

0.5 to 6mm/s (max. 25mm/s)

±5μm

φ220mm

±2mm/±1゜

30kg

30 to 100 mN (variable)

φ1.6 mm carbide ball, length 53 mm

14,400 points/rotation

Gaussian/2RC

15, 50, 150, 500, 1500 peaks/rotation, any value in range 15 to 1500 peaks/rotation

15 to 1500, 15 to 500, 15 to 1500 peaks/rotation

0.025, 0.08, 0.25, 0.8, 2.5, 8 mm, settable in 0.0001 mm units

MZC (min. range centerline method), LSC (least square centerline method), MIC (max. inscribed circle centerline method), MCC (min. circumscribed circle centerline method), N.C. (no correction), Multi (multiple setting)

Roundness, flatness, parallelism, concentricity, coaxiality, cylindricity, diameter deviation, squareness, thickness non-uniformity, run-out, diameter

Straightness (Z), straightness (R), cylindricity, squareness, parallelism, diameter deviation, axis center straightness

Centering/tilting support functions, notch processing function (level, angle, cursor)

Combination of roundness evaluation methods, nominal value collation, shading processing function, real-time display verification function

automatic measurement function

Offset type sensor holder provided as standard

Upgradable to RONDCOM 54

Measuring conditions, measuring parameters, printer output conditions, profile drawing (expansion plan, 3D plan), comments, error messages, etc.

Selection of color printer/laser printer

±1000μm, ±200μm

AC 100 V to 240 V, 50/60 Hz

Approx. 470 VA (not including printer)

Supply pressure: 0.35 to 0.7 MPa, Usage pressure: 0.3 MPa

30NR/min

DX SD

RONDCOM 44

15” LCD

990×925×1600

500

17” CRT

630×473×895

220

Measuring system

Measuring range

Rotation accuracy

Straightness accuracy

Parallelism accuracy

Indication Accuracy

Rotation speed (θ-axis)

Up/down speed (Z-axis)

Radius speed (R-axis)

Auto-trigger function

Rotating table

Sensor

Number of sampling points

Filter types

Cutoff values

Roundness evaluation of profile error

Measuring items

Processing functions

Special functions

Display (color monitor)

Display items

Recording system

Measuring range

Other

Model

Max. measuring diameter

Left/right feed (R-axis)

Up/down feed (R-axis)

Max. load diameter

Max. measuring height

Radial direction JIS 7451-1997

Axial direction JIS B 7451-1997

Up/down direction (Z-axis)

Radius direction (R-axis)




Measuring speed (drive speed)


Z-axis/R-axis

Table outer diameter

Adjustment range centering/tilting

Load

Measuring force

Stylus shape

Digital filter

Rotation

Rectilinear

Rotation

Rectilinear

Power supply (voltage indication required)

Power consumption

Air source

Air consumption volume

Machine dimensions (mm)

Machine weight (kg)

(low pass)

(band pass)

(low pass)

Roundness

・CylindricalP

rofileM

easuringInstrum

ents/3D

Vision

System

s

250


Table Rotating Type Roundness・Cylindrical Profile Measuring Instruments 〉〉〉

Compact Desktop Roundness Measuring Instruments with Superior Cost Performance and Analysis Functions of a High Class Machine

Superior Cost-Performance Roundness Measuring Instrumentwith TIMS Next-Generation Integrated Program● Standard high-precision static-pressure air bearings (θ axis).

● Provided with TIMS next-generation integrated program.

● High-precision column (Z axis) enables cylindricity analysis (for 43C/41C).

● User-friendly centering/tilting support function.

● Standard semi-automatic measuring function where height is specified.

● Provided with power spectrum, Fournier analysis and other surface analysis functions.

RONDCOM 41C

RONDCOM 31C

RONDCOM 43C

www.thaimetrology.com



Roundness

・CylindricalP

rofileM

easuringInstrum

ents/3D

Vision

System

s

251

Specifications

RONDCOM 43C RONDCOM 41C RONDCOM 31CModel

* When optional E-VS-S38A vibration isolation stand is used for RONDCOM 43C, the allowable load is 15 kg or less.

(0.02 + 6H / 10000) μm

(0.01+3H/10000) μm

0.25μm/100mm, 0.8μm/300mm

1.5μm/300mm

130 kg

(0.04 + 6H/10000) μm

(0.02+3H/10000) μm

120 kg

300 mm

OD: 520mm / ID: 300mm

0.6 – 6 mm/s

15 mm/s

Straightness, taper, cylindricity, squareness, parallelness

0.025, 0.08, 0.25, 0.8, 2.5 or 8mm/s

Roundness, flatness, parallelness, concentricity, coaxiality, cylindricity, diameter deviation, squareness, non-uniformity, run-out

φ250 mm

125 mm

φ400 mm

0.50μm/100mm, 1.5μm/300mm

3μm/300mm

6/min

5 mm/s

±5mm

φ148 mm

±2mm

±1°

25 kg *

±400 μm

70 mN

φ1.6mm carbide ball

Digital filters (phase compensation, 2RC)

15, 50, 150, 500 peaks/rotation

15 – 150, 15 – 500 peaks/rotation

Color monitor (15 inch)

Measuring conditions, measuring parameters, profile drawing (expansion plan, 3D plan)

Printer output conditions, comments, error message, etc.

Select color printer or laser printer

50, 100, 200, 500, 1K, 2K, 5K, 10K, 20K, 50K, 100K (automatic)

AC 100V, 50/60 Hz

600 VA

0.35 – 0.7 MPa

30 R/min. (standard status)

1800 (W) × 1000 (D) × 1700 (H) mm (when optional system rack is used)

200 mm

OD: 420mm / ID: 200mm

------

------

5 mm/s

5 mm/s

------

------

Measuring range

Rotation accuracy


Parallelness accuracy

Rotation speed (θ axis)

Radius speed (R axis)

Auto stop function

Rotating table

Detector


Measuring items

Functions

Types of filters

Cut-off value

Display

Display items

Recording unit

Power source

Power consumption

Air source

Air consumption

Installation dimensions

Weight

Up/down speed (Z axis)


Left/right feed (R axis)

Up/down feed (Z axis)

Max. load diameter


ISO 4291/ JIS B7451

Max. deviation from min. square circle

Measuring

Movement

Z axis/R axis


Centering adjustment range

Tilting adjustment range

Load

Linearity range

Measuring force

Stylus shape

Rotation direction (θ)

Rectilinear direction up/ down direction (Z)

Rotation (low pass)

Rotation (bound pass)

Rectilinear direction up/ down (low pass)

Method

Magnification

Roundness, flatness, parallelness, concentricity, coaxiality, squareness,

non-uniformity, run-out

MZC (min. range center line method), LSC (min. square center line method), MIC (max. inscribed circle center line method), MCC (min. circumscribed circle center line method),

N.C. (no correction)

Centering/tilting support function, shading processing function, notch processing function (level, angle, cursor), real-time display function,

simplified automatic measurement, combination of roundness evaluation methods, design value collation function

Roundness displayContour line display Concentricity displayCylindricity display

RONDCOM 43C/41C RONDCOM 31C




Roundness

・CylindricalP

rofileM

easuringInstrum

ents/3D

Vision

System

s

252



On-Site Easy to Operate Desktop Roundness Measuring Instruments

■ Features● High Precision/High Durability Ceramic Column (45A only)

The provision of a ceramic column with the high precision and durability to provide 0.15μm/100mm (0.3μm/350mm) straightness enables measurement of straightness, cylindrici-ty and squareness.

● Guaranteed Parallelness Accuracy (45A only)The parallelness of the center of the rotating axis to the column is guaranteed to be 2μm/350mm. This achieves high measuring accuracy for cylindricity, squareness and taper.

RONDCOM 40C RONDCOM 30C

RONDCOM 45A

Roundness

・CylindricalP

rofileM

easuringInstrum

ents/3D

Vision

System

s

253

Highly Rigid Static-Pressure Air BearingsStatic-pressure air bearings with a proven track record have been

adopted for the rotation mechanism, providing the highest load

resistance and extended rotation precision in this class of machine.

Operator-Friendly Centering/Tilting Support FunctionEccentricity in the X and Y directions

of the center of the workpiece axis

with respect to the center of the rotat-

ing axis, as well as tilting are dis-

played in bar graphs on the LCD panel. This simplifies alignment.

Automatic Measuring FunctionEach axis is provided with a motorized auto stop function, automat-

ing movement, measurement and retract operations. This function

is extremely effective for repeated measurements of mass pro-

duced workpieces on the production floor.

Automatic Magnification Calibration FunctionThis function simplifies calibration of magnification when the stylus

is changed to accommodate different workpieces profiles. The sen-

sitivity for four types of detectors can be registered.

Viewing the eccentricitygraph display during cen-tering simplifies the proce-dure.

Measurement Parameter values and measuring profile for roundness, coaxiality, cylin-dricity and squareness, etc.

Menus to set measuring, analysis, display and recording conditions

Corrects for deviation ofrotating axis center andcenter of workpiece, andprints outs an easy-to-viewrecord.

Automatic Eccentricity Correction/Tilt Correction FunctionAnalyzing the eccentricity and tilting of the workpiece in the measuring range

and automatically correcting for it have dramatically reduced the time and effort

needed to perform alignment.

Combination of Center Line Definition MethodsFour types of center line definition methods can be freely selected and com-

bined for concentricity, squareness and other measuring items.

Standard High Speed Graphic PrinterA high speed graphic printer that uses recording paper with a recording width of

104mm immediately provides a high-resolution record of measurement. Since

various measuring conditions and parameter results are recorded at the same

time, it can be used as a data sheet.

Standard IC Card UnitThe provision of an IC card unit enable all measuring condition settings and

measured data to be stored. Special programs that are provided in response to

customer requests can be loaded using the IC card unit.

Setting Procedure

Functions to Reduce Operator Load

Compact Easy to Operate Roundness Measuring Instrument

Automatic Eccentricity Correction

Corrects for tilting of rotat-ing axis center and centerof workpiece, enhancingjudgment accuracy ofcoaxiality and cylindricity.

Automatic Tilt Correction

Calculates center of work-piece from data for remain-ing round portion, enablingjudgment that does not dif-fer from person to person.

Notched Workpiece Automatic Measuring Functions

Detector downDetector retract (ID), advance (OD)MeasurementDetector advance (OD), retract (ID)Detector up

1

2

3

4

5

Detector advanceMeasurements 4, 6, 8Movements 5, 7Detector retract

1

2

3

9

Detector downMeasurementDetector up

1

2

3

Roundness

・CylindricalP

rofileM

easuringInstrum

ents/3D

Vision

System

s

254

Specifications

RONDCOM 45A RONDCOM 40C RONDCOM 30CModel

350 mm

550 mm

350 mm

0.15μm/100mm, 0.3μm/350mm

2μm/350mm

±800μm

1800(W) × 1000(D) × 850(H)mm

175 kg

±400μm

300 mm

φ400 mm

520 mm

300 mm

(0.050+6H/10000)μm H: Height from table surface to measuring point (mm)

(0.025+3H/10000)μm

0.50μm/100mm, 1.5μm/300mm

3μm/300mm

6/min

5 mm/s

±1μm

φ148 mm

±2mm

±1°

25 kg

70 mN


2RC, phase compensation

15, 50, 150, 500 peaks/rotation

LCD panel

Measuring conditions, measuring parameters, profile drawing, printer output conditions, comments, error message, etc.

Thermal dot array (Recording width: 104mm)

50, 100, 200, 500, 1K, 2K, 5K, 10K, 20K, 50K

AC 100V ±10%, 50Hz/60 Hz (must specify)

250 VA

0.3 – 0.7 MPa

30 R/min (standard status).

1400(W) × 900(D) × 850(H)mm

Magnification calibration block gauge, printing paper (E-CH-R06A), instruction manual

Measuring range

Rotation accuracy






Auto stop function

Rotating table

Detector


Measuring items

Functions

Types of filters

Cut-off value

Display

Display items

Recording system

Magnification

Power source

Power consumption

Air source

Air consumption


Weight

Standard accessories




Max. load diameter

ISO 4291 / JIS B7451


Z axis/R axis




Load

Linearity range

Measuring force

Stylus shape

Axial direction (Z axis)

Outer diameter

Inner diameter


Circumferential direction (θ axis)

φ260 mm

130 mm

0.6, 1.5, 3 or 6 mm/s Rapid feed: Approx. 15mm/s

Straightness, taper, cylindricity, squareness

φ250mm

125mm

200mm

420 mm

200 mm

------

------

5 mm/s

------

1400(W) × 900(D) × 750(H)mm

Roundness, flatness, parallelness, concentricity, coaxiality,

squareness, non-uniformity, run-out

Roundness, flatness, parallelness, concentricity, coaxiality, cylindricity, diameter deviation, squareness, non-uniformity, run-out

MZC (min. range center line method), LSC (min. square center line method), MIC (max. inscribed circle center line method), MCC (min. circumscribed circle center line method),

N.C. (no correction)

120 kg

Centering/tilting support function, AI measurement function, Notch function (level, angle), automatic eccentricity correction/tilt correction function, combination of roundness evaluation methods,

pass/fail judgment function, automatic measurement

Roundness measurement Concentricity measurement Straightness measurement (40C/45A)Sample Measurement Analysis

262

Roundness

・CylindricalP

rofileM

easuringInstrum

ents/3D

Vision

System

s



Working Towards the World’s Standard Machines

■ New Offset Type Sensor Holder (patent pending)

This function fully automatically adjusts and corrects deviationbetween the workpiece shaft center and the center of rotationof the table in a short time.Combined use with full automatic measurement enables com-pletely automatic operation.

All-in-one Type RONDCOM 54DXSeparate Type RONDCOM 54SD

* The anti-vibration table, system rack and printer are options.

Rotation accuracy of 0.02 ±4H/10000 μmIn full pursuit of compact high accuracy and high rigidity

Conventional sensor holder Offset type sensor holder

Tilt 200μm

Centering Tilting

Eccentricity 200μm

50m

m

φ60

Mounting of workpiece

Alignment

Measurement

Printing of theevaluation results

CenteringOperation to make the center of rotation of the workpiece match the center of rotation of the table

TiltingOperation to make the tilt of the rotating axis of the workpiece match the rotating axis of the table

■ Auto-centering, Auto-tilting andAuto-leveling Function

The RONDCOM 54DX/SD comes equipped with a newly developed offset type sensor holder as standard. This holder enables measurement withoutinterference between the R-axis arm and the workpiece. (Patent pending)This holder simplifies the measurement of flanged workpieces, workpieces with thick walls between the ID and OD, and deep holes.

263

Roundness

・CylindricalP

rofileM

easuringInstrum

ents/3D

Vision

System

s

The RONDCOM 54 comes equipped with a newly developed offset type sensor holder as stan-dard. This holder enables measurement without interference between the R-axis arm and theworkpiece. (Patent pending)This holder simplifies the measurement of flanged workpieces, workpieces with thick wallsbetween the ID and OD, and deep holes. An offset type CNC sensor holder for enhancingRONDCOM 54's CNC functions is also available. Measurement personnel merely register themeasurement procedure by teaching, and the orientation of the sensor is automatically alignedwith the ID, OD, top or bottom surface, or taper surface to ensure full automatic measurement.

Offset Type CNC Sensor Holder (option) (patent pending)

Specifications

Measuring system

Measuring range

Rotation accuracy



Indication Accuracy

Rotation speed (θ-axis)

Up/down speed (Z-axis)

Radius speed (R-axis)

Auto-trigger function

Rotating table

Sensor

Number of sampling points

Filter types

Cutoff values


Measuring items


Special functions

Display (color monitor)

Display items

Recording system

Measuring range

Other

CNC and manual

φ300mm

170mm

300mm

φ580mm

OD measurement: 300mm, ID measurement: 300mm

(0.02+4H/10,000) μm H: Height from table surface to measuring point (mm)

(0.02+4R/10,000) μm R: Distance from table center of rotation (mm)

0.12μm/100mm, 0.2μm/300mm

0.8μm/150mm

0.8μm/300mm

1.0μm/150mm

(2+L/170) μm L: Drive distance (mm)

2 to 10/min

0.5 to 6 mm/s (max. 50 mm/s)

0.5 to 6 mm/s (max. 25 mm/s)

±5μm

φ220mm

±2mm/±1゜

30kg

30 to 100 mN (variable)

φ1.6mm carbide ball, length 53 mm

14,400 points/rotation

Gaussian/2RC

15, 50, 150, 500, 1500 peaks/rotation, any value in range 15 to 1500 peaks/rotation

15 to 1500, 15 to 500, 15 to 1500 peaks/rotation

0.025, 0.08, 0.25, 0.8, 2.5, 8 mm, settable in 0.0001 mm units

MZC (min. range centerline method), LSC (least square centerline method), MIC (max. inscribed circle centerline method), MCC (min. circumscribed circle centerline method), N.C. (no correction), Multi (multiple setting)

Roundness, flatness, parallelism, concentricity, coaxiality, cylindricity, diameter deviation, non-uniformity, squareness, thickness non-uniformity, run-out, diameter

Straightness (Z), straightness (R), cylindricity, squareness, parallelism, diameter deviation, axis center straightness

Centering/tilting support functions, notch processing function (level, angle, cursor, combination of roundness evaluation

methods, nominal value collation, shading processing function, real-time display verification function

CNC automatic measurement function, automatic centering/tilting function (for R54)

Offset type sensor holder provided as standard

Offset Type CNC Sensor Holder (option) can be mounted

Measuring conditions, measuring parameters, printer output conditions, profile drawing (expansion plan, 3D plan), comments, error messages, etc.

Selection of color printer/laser printer

±1000μm, ±200μm

AC 100 V to 240 V, 50/60 Hz


Supply pressure: 0.35 to 0.7 MPa, Usage pressure: 0.3 MPa

30NR/min

ModelRONDCOM 54

DX SD


Left/right feed (R-axis)

Up/down feed (R-axis)

Max. load diameter


Radial direction JIS 7451-1997

Axial direction JIS B 7451-1997








Z-axis/R-axis


Adjustment range centering/tilting

Load

Measuring force

Stylus shape

Digital filter

Rotation

Rectilinear

Rotation

Rectilinear

Power supply (voltage indication required)

Power consumption

Air source

Air consumption volume

Machine dimensions (mm)

Machine weight (kg)

(low pass)

(band pass)

(low pass)

15” LCD

990×925×1600

500

17” CRT

630×473×895

220

Roundness

・CylindricalP

rofileM

easuringInstrum

ents/3D

Vision

System

s

246



Semi-Automatic Unit with Superior Operating Ease and Cost Performance

Shading diagram

3D display diagram

■ Features●TIMS New-Concept Integrated Program

TIMS provides a full range of functions, including power spectrum,load curve and other surface characteristic analysis functions, as wellas contour line, shading and other visualization functions. Flexibilityfor mutual access of measuring systems has also been enhanced.

●Easy OperationA variety of incorporated functions reduce operator load, such as thecentering/tilting support function to simplify alignment, magnificationcalibration function to facilitate easy detector calibration, and the abil-ity to rearrange the icons to suit each operator.

●Enhanced SafetyThe detector has a standard emergency stop function. In the eventthe detector tip is subjected to an overload, the emergency stopmechanism is tripped.

●Easy Analysis and Higher EfficiencyThe roundness judgment method, filter value, display magnification,measuring standard and other analysis conditions can be freelychanged and reanalysis performed.In addition, a maximum of 40 contour sections can be freely com-bined at a time for analysis.

RONDOM 47A

* Vibration isolation stand, system rack and printer are options.

Roundness

・CylindricalP

rofileM

easuringInstrum

ents/3D

Vision

System

s

247

Specifications

* Space occupied when optional vibration isolation stand (E-VS-S21A) and system rack (E-DK-S24A) are used.




Max. load diameter


JIS B7451 - 1997


Up/down direction (Z axis)


Measuring speed

Movement speed

Z axis/R axis




Load

Linearity range

Measuring force

Stylus shape (EM46000-C302)

Rotation

Rectilinear

Rotation (Low pass)

(Band pass)

Rectilinear (Low pass)

Measuring range

Rotation accuracy



Rotation speed


Radial speed (R axis)

Auto stop function

Rotary table

Detector (E-DT-R83A)


Measuring items

Functions

Types of filters

Cut-off value

Display

Display items

Recording method

Measuring magnification

Power source

Power consumption

Air source

Air consumption


Weight

RONDCOM 47A

φ350 mm

191 mm

350 mm

φ600 mm

Outer diameter: 350mm, 675mm for roundness/coaxiality measurement, Inner diameter: 300mm

(0.02 + 6H / 10000) μm H: Height from table surface to measuring point (mm)

(0.01 + 3H / 10000) μm

0.15μm/100mm, 0.3μm/350mm

1.5μm/350mm

6/min

0.6, 1.5, 3, 6 mm/s

15 mm/s

5 mm/s

±5μm

φ220 mm

±2mm

±1°

60 kg

±1mm

30 - 100 mN (variable)

φ1.6mm carbide ball, Length: 53mm

MZC (min. range center line method), LSC (min. square center line method), MIC (max. inscribed circle center line method)

MCC (min. circumscribed circle center line method), N.C. (no correction)

Roundness, flatness, parallelness, concentricity, coaxiality, cylindricity

Diameter deviation, squareness, non-uniformity, run-out


Centering/tilting support function, shading processing function,

Notch processing function (level, cursor), simplified automatic measuring function,

real-time display, combination of roundness evaluation methods, design value collation

Digital filters (2RC, Gaussian)

Select 15, 50, 150, 500 peaks/rotation or 15 - 500 peaks/rotation

15 - 150, 15 - 500, 50 - 500 peaks/rotation

0.025, 0.08, 0.25, 0.8, 2.5 or 8mm, set in 0.0001mm units





50, 100, 200, 500, 1k, 2k, 5k, 10k, 20k, 50k, 100k

AC 100 - 240V, 50/60 Hz (set at factory when shipped)


Supply pressure: 0.5 - 0.7 MPa, Usage pressure: 0.4 MPa

30 r/min. (standard conditions)

2000 (W) × 1000 (D) × 1950 (H) mm *

600 kg

Model

260

Roundness

・Cylindricity

Measuring

Instruments/3D

Vision

System

s

Roundness・Cylindricity Measuring Instruments


CNC Machine with Superior Cost Performance

■ Features

Top Class Rotation PrecisionThe use of high-precision air bearings, a core ACCRETECH technology, guarantees theworld’s top class of rotation accuracy.

High-Speed Alignment for High Measuring EfficiencyFaster alignment and measuring speeds enable high-efficiency measurements, making the55A ideal as a line-side evaluation instrument.

Automatic Measurements Reduce Manpower RequirementsThe teaching/playback function automates the procedures from measurement to printout,making the unit perfect for measurement of mass-produced items.

Standard [TIMS] Next-Generation ProgramThe TIMS integrated program is perfectly matched to the age of networks, allowing data tobe freely exchanged between different measuring instruments.

Fully Automatic Detector Holder (option)The fully automatic detector automates measurement of inner diameter, outer diameter,upper surface and lower surface.

Roughness Measuring Function (option)Additional measuring function of roughness enables measurement of roughness in direc-tions of Z-axis and R-axis.

RONDCOM 55B* Anti-vibration table andsystem rack are options.

Fully AutomaticDetector Holder (option) * Patent pending

Roughness MeasuringFunction (option)

261

Roundness

・Cylindricity

Measuring

Instruments/3D

Vision

System

s

Specifications

RONDCOM 55BModel




Max. load diameter


JIS B7451



Radius direction (R axis)


Measurement

Alignment

Measuring speed

Movement speed

Measuring speed

Movement speed

Function

Stop accuracy




Load

Measuring force

Stylus shape

Rotation direction (θ )

Rectilinear direction (Z)

Radius direction (R)



Monitor

Content

Method

Magnification

Measuring range

Rotation accuracy



Auto stop

Table load conditions

Detector


Measuring items


Types of filters

Cut-off value

Display

Recording unit

Power source

Power consumption

Air source

Air consumption


Weight




φ350 mm

191 mm

350 mm

φ600 mm

Outer diameter: 350mm (670mm for roundness/coaxiality measurement), Inner diameter: 350mm

(0.02 + 6H / 10000) μm H: Height from table surface to measuring point [mm]

(0.01 + 3H / 10000) μm

0.15μm/100mm, 0.3μm/350mm

1μm/100mm

1.5μm/350mm

2 – 10/min

6, 10 or 20/min

0.6 – 6.0 mm

0.6 – 20.0 mm

0.6 – 6.0 mm

0.6 – 15 mm

Z axis, R axis

Z axis: ±5μm, R axis: ±5μm

φ290 mm

±5mm (automatic)

±1° (automatic)

60 kg (for measurement and centering)

30 – 100 mN


MZC (min. range center line method), LSC (min. square center line method), MIC (max. inscribed circle center line method)


Roundness, flatness, parallelism, concentricity, coaxiality, cylindricity, diameter deviation, non-uniformity, squareness, run-out

Straightness, taper, cylindricity, squareness, parallelism

Straightness

CNC measuring function, Notch function (level, angle, cursor), parameter nominal value collation


15, 50, 150, 500, 15 – 150, 15 – 500 peaks/rotation

0.025, 0.08, 0.25, 0.8, 2.5 or 8 mm


Measuring conditions, measuring parameters, profile drawing (expansion plan, 3D plan, shading)



10 – 200 K (22 steps), auto, measuring magnification

AC 100V, 50/60 Hz

800 VA (not including printer)

0.5 – 0.7 MPa

30NR/min

2000 (W) × 950 (D) × 1950 (H) mm

400 kg

● Diverse evaluation of cylindrical workpieces

Cylindricity Coaxiality Flatness

Roundness

・CylindricalP

rofileM

easuringInstrum

ents/3D

Vision

System

s

242



0.02μm Rotation Accuracy and Alignment Within 60 Seconds!

Fully Automatic Detector Holder (option)(Patent pending)

Ideal as Line-Side Evaluation MachineThe RONDCOM 60A has the accuracy, throughput, analysis functions,resistance to environmental elements and safety features required in aline-side measuring unit.

Diameter Measuring FunctionThe R-axis scale makes it possible to measure diameter of workpiecewhile the machine is in operation to measure soundness.* Optical calibration is necessary to measure diameter.

Teaching Function Automates MeasurementsTheaching function enables the machine to sun full-automatically to per-form such as, auto alignment, plural section measurement by rotary / lin-ear motion, creation of inspection certificate for measuring results.

Measured Data Recalculation FunctionThe measured data for up to 40 sections can be recalculated after chang-ing the measuring conditions and reference axis center. This enables pro-file analysis from a variety of viewpoints.

Granite Used for Column/Base/R AxisEach axis has air bearings that feature no contact resistance. In addition,granite is used for the guides, boasting an absolute minimum of changeover time and easy maintenance.

Ideal for Inspection of Automobile/Machine Tool PartsThe RONDCOM 60A has the precision needed for the measurement ofpistons, fuel valves, ball bearings and various types of fluid dynamic bear-ings. It is also suitable for the non-contact measurement of photocopierdrums and other components.

Air bearings have been provided on the Z axisand R axis for the first time in the industry. Inaddition, the RONDCOM 60A qualifies for theCE marking, guaranteeing conformance withhealth and safety requirements.

■ Features

* Vibration isolation stand andsystem rack are options.

RONDCOM 60A

Roundness

・CylindricalP

rofileM

easuringInstrum

ents/3D

Vision

System

s

243

Specifications

RONDCOM 60AModel

* When air vibration isolation stand and system rack are used.

Measuring range

Rotation accuracy



Indication accuracy

Auto stop


Detector


Measuring items

Functions

Type of filter

Cut-off value

Display

Recording unit

Power source

Power consumption

Air source

Air consumption


Weight







Max. load diameter


JIS B7451






Measurement

Alignment

Measuring speed

Movement speed

Measuring speed

Movement speed

Function

Stop accuracy




Load

Measuring force

Stylus shape





Monitor

Content

Method

Magnification

φ420 mm

220 mm

500 mm

φ680 mm

Outer diameter: 500mm (700mm for roundness/coaxiality measurement), Inner diameter: 500mm


(0.010 + 3H / 10000) μm

0.1μm/100mm, 0.25μm/500mm

0.5μm/200mm

1.5μm/500mm

(2 + L / 200) μm L: Movement distance (mm)

2 – 10/min

6, 10 or 20/min

0.6 – 6.0 mm/s

0.6 – 30.0 mm/s

0.6 – 6.0 mm

0.6 – 20.0 mm

Z axis, R axis


φ290 mm

±5mm (manual/automatic)

±1° (manual/automatic)


70 mN


Roundness, flatness, parallelness, concentricity, coaxiality, cylindricity, diameter deviation, squareness, non-uniformity, run-out, diameter


Digital filter (2RC, Gaussian)

15, 50, 150, 500, 15 – 150, 15 – 500 peaks/rotation

0.025, 0.08, 0.25, 0.8, 2.5 or 8mm






AC 100V, 50/60 Hz


0.5 – 0.7 MPa

49 R/min.

2000 (W) × 950 (D) × 1950 (H) mm*

600 kg

MZC (min. range center line method), LSC (min. square center line method), MIC (max. inscribed circle center line method), MCC (min. circumscribed circle center line method), N.C. (no correction)

CNC measuring function, Notch function (level, angle, cursor), division print function, real-time display function, combination of roundness evaluation methods, parameter design value collation

● Example Fourier analysis performed from roundness profile to evaluate influence on vibration

Power spectrum Fourier analysis Roundness

Roundness

・CylindricalP

rofileM

easuringInstrum

ents/3D

Vision

System

s

240



The Challenge: The No. 1 Precision in the World

■ Features●World’s top rotation accuracy: 0.01μm.

● TIMS next-generated analysis program

(ACCRETECH integrated measuring program).

●World’s highest throughput (within 60 seconds for

auto centering/tilting).

● Proven air bearings adopted for measuring axes.

● Attractive and user-friendly new design.

● Standard air vibration isolation guarantees accura-

cy.

● New detector with safety mechanism.

We continue to take up the challenge of providing the numberone precision in the world to respond to the needs of our cus-tomers. This has resulted in the adoption of granite for the stan-dard guide that features minimal change over years of use, airbearings with extremely small frictional drag and advanced cor-rection technology to achieve nanometer level accuracy.

Fully Automatic DetectorHolder (option)

(Patent pending)

The fully automatic detector holder has two

rotating axes: One for rotation in the hori-

zontal plane (XY plane), and one for rota-

tion in the vertical plane (YZ plane). In the

past, the operator had to align the detector

with the measuring point. This new holder

fully automates this process, enabling

automatic measurement of inner diameter,

outer diameter, upper surface, lower sur-

face and taper surface.

RONDCOM 65A

Roundness

・CylindricalP

rofileM

easuringInstrum

ents/3D

Vision

System

s

241

Specifications

RONDCOM 65AModel

Measuring range

Rotation accuracy



Indication accuracy

Auto stop


Detector

Measuring items

Functions

Types of filters

Cut-off value

Display

Recording unit

Power source

Power consumption

Air source

Air consumption


Weight



Up/down speed (R axis)





Max. load diameter


JIS B7451






Measurement

Alignment

Measuring speed

Movement speed

Measuring speed

Movement speed

Function

Stop accuracy




Load

Measuring force

Stylus shape



Radius direction (R)



Monitor

Content

Method

Magnification

φ420 mm

220 mm

500 mm

φ680 mm

Outer diameter: 500mm (825mm for roundness/concentricity measurement), Inner diameter: 500mm


(0.005 + 3H / 10000) μm

0.05μm/100mm, 0.2μm/500mm

0.5μm/200mm

1.5μm/500mm

(2 + L / 220) μm L: Movement distance (mm)

2 – 10/min

6, 10 or 20/min

0.6 – 6.0 mm

0.6 – 30.0 mm

0.6 – 6.0 mm

0.6 – 20.0 mm

Z axis, R axis


φ290 mm

±5mm

±1° (automatic/manual)


30 – 100 mN


Roundness, flatness, parallelness, concentricity, coaxiality, cylindricity, diameter deviation, non-uniformity, squareness, run-out, diameter


Straightness

CNC measuring function, Notch function (level, angle, cursor), parameter design value collation


15, 50, 150, 500, 15 – 150, 15 – 500 peaks/rotation

0.025, 0.08, 0.25, 0.8, 2.5 or 8mm

Color monitor





AC 100V, 50/60 Hz


0.5 – 0.7 MPa

49 R/min.

1900 (W) × 950 (D) × 1800 (H) mm

700 kg


Roundness (using master ball) Up/down direction verticality (using straight edge) Left/right direction verticality (using optical flat)

●World’s Top Accuracy for Each Axis

0.05μm 0.073μm

0.079μm

Roundness

・CylindricalP

rofileM

easuringInstrum

ents/3D

Vision

System

s

258


Detector Rotating Type Roundness・Cylindrical Profile Measuring Instruments 〉〉〉

Tailored to Machine Tool and Automobile Part Production Floors

● Highest in class rotation accuracy of 0.06μm.● Auto centering/tilting functions.● Incorporates fully automatic 7-axis control function.● Fully automated, from auto centering to measure-

ment.● Achieves high-speed processing of cylindrical pro-

file data.● Load curve, amplitude distribution curve, power

graph, Fournier analysis and other functions facili-tate powerful surface analysis.

● Roundness evaluation methods can be combinedfor analysis.

RONDCOM 71C-70

RONDCOM 72A

■ Features

● Ideal for cylindrical analysis of different medium-sized workpieces.

● TIMS next-generation integrated program simplifiesconnection to LAN.

● Standard auto centering function.● Semi-automatic measurement possible by specify-

ing height.

■ Features

Crankshaft measurement

Specifications

Measuring range

Rotation accuracy (JIS B7451)



Drive speed


Detector


Measuring items

Functions

Types of filters

Cut-off value

Display unit

Recording unit

Power source

Power consumption

Air source

Installation dimensions (W × D × H)

Weight

Model


Min. measuring ID

Left/down feed range (X axis)

Front/rear feed range (Y axis)

Up/down feed range (Z axis)

Max. load diameter


Rotation direction

Up/down direction

Table dimensions

Load weight

Measuring force

Stylus profile

Rotation direction

Up/ down direction

Rotation direction

Rectilinear direction

Monitor

Content

Method

Magnification

RONDCOM 71C-70RONDCOM 72A RONDCOM 71C-10

Filler diameter +2mm or more

700 mm

φ520 mm

600 (W) × 540 (D) mm

Roundness, flatness, parallelness, concentricity, coaxiality, cylindricity, diameter deviation, non-uniformity, squareness, run-out


Auto centering function, notch processing function (level, angle, cursor), parameter design value collation function, real-time display function, centering support function

Digital filters (2RC, phase compensation)

15, 50, 150, 500, 15 – 150, 15 – 500 peaks/rotation

0.025, 0.08, 0.25, 0.8, 2.5 or 8mm





10 – 200 K, Auto, measuring magnification

AC 100V, 50/60 Hz

3100 × 2500 × 2500

1700kg


φ380 mm

20 mm

460 mm

φ400 mm

460 (W) × 400 (D) mm

80 kg

2200 × 2400 × 2100

1300kg

50 mm

1000 mm

φ900 mm

0.06 μm

2μm/200mm, 5μm/600mm

2μm/100mm

2/min (measuring), 10/min (auto centering)

0.6, 1.5, 6 mm/s (measuring), Max. 30mm/s

600 (W) × 550 (D) mm

70 mN


CNC measuring function, auto tilting function

3 kVA

0.5 – 0.7 MPa, 30R/min

2850 × 3300 × 3000

3100kg

20 mm

0.08 μm (During arm operation)

2μm/200mm (During arm operation)

3μm/100mm


0.6, 6 mm/s

Arm a: 170 mN, Arm b: 85 mN

R0.25 mm sapphire

Semi-automatic measurement

1 kVA

0.5 – 0.7 MPa, 90R/min

φ450 mm

600 mm

200 kg

Coaxiality display Cylindricity display

Data sheet

Roundness

・CylindricalP

rofileM

easuringInstrum

ents/3D

Vision

System

s

259

Roundness

・CylindricalP

rofileM

easuringInstrum

ents/3D

Vision

System

s

256


Detector Rotating Type Roundness・Cylindrical Profile Measuring Instruments 〉〉〉

Air Bearings on Each Axis Achieve

World’s Top Precision

● Static-pressure air bearings on X axis, Y axis, Z axis and

θ axis.

● Incorporates fully automatic 7-axis control function.

● Provided with TIMS next-generation integrated program.

● Automatic measurement of multiple workpieces.

● Teaching function.

● Granite used for column and base maintains precision for

many years.

● Automatic part program call function (option).

● Rotation accuracy: 0.2μm (JIS B7451)● Straightness: 1.5μm/700mm

(When 700mm longshaft measuringtool is used)

Sample Applications

Crankshaft

RONDCOM 75GB

(Long shaft measuring tool is optional.)

■ Features

Cylinder block

Specifications

RONDCOM 75GB Series

Measuring range

Rotation accuracy (JIS B7451)



Drive speed


Detector


Measuring items

Functions

Types of filters

Cut-off value

Display unit

Recording unit

Power source

Power consumption

Air source

Installation dimensions (W × D × H)

Weight

Model


Min. measuring ID

Left/down feed range (X axis)

Front/rear feed range (Y axis)

Up/down feed range (Z axis)

Max. load diameter


Rotation direction

Up/down direction

Table dimensions

Load weight

Stylus profile

Measuring force

Rotation direction

Up/ down direction

Rotation direction

Rectilinear direction

Monitor

Content

Method

Magnification

Measuring unit

Control unit

1500mm Type1000mm Type 1 Ton Typeφ450 mm

Filler diameter +2mm or more

200 mm

φ900 mm

0.2μm (standard detector), 0.4μm (long shaft measuring tool, R = 700mm)

0.5μm/100mm (standard detector), 1.5μm/700mm (700mm long shaft measuring tool,)

1.5μm/100mm


0.6, 6 mm/s

R0.25 mm sapphire

Arm a: 170 mN, Arm b: 85 mN

MZC (min. range center line method), LSC (min. square center line method), MIC (max. inscribed circle center line method),


Roundness, flatness, parallelness, concentricity, coaxiality, cylindricity, diameter deviation, non-uniformity, squareness, run-out


CNC measuring function, auto tilting function, auto centering function, notch processing function (level, angle, cursor),

parameter design value collation function, real-time display function, centering support function

Digital filters (2RC, phase compensation)

15, 50, 150, 500, 15 – 150, 15 – 500 peaks/rotation

0.025, 0.08, 0.25, 0.8, 2.5 or 8mm

Color monitor




10 – 200 K, Auto, measuring magnification

AC 100V, 50/60 Hz

3 kVA

0.35 – 0.7 MPa, 160 R/min

4100 × 4200 × 4100

6500 kg

100 kg

1500 mm

1200 (W) × 800 (D) mm

1000kg

4500 × 4300 × 4500

11400 kg

100 kg

1000 mm

4100 × 4200 × 3700

6200 kg

100 kg

1500 mm

700 mm

800 (W) × 680 (D) mm

200 kg

3D display Contour line display

Data sheet

Roundness

・CylindricalP

rofileM

easuringInstrum

ents/3D

Vision

System

s

257

Documents

Roundness Cylindrical Profile Measuring Instruments Table ... › file › file-7-21-2015-2-43-38-PM.pdf · Magnification Power consumption Air source Air consumption Installation