R O T O R S S P R A Y S V A L V E S C O N T R O L L E R S S E N S O R S C E N T R A L C O N T R O L S M I C R O RZWSRoot Zone Watering System

RZWS

Large & Small Trees

Small Trees,Large Bushes& Shrubbery

Shrubbery

36" RZWS18" RZWS

10" RZWS

If you want young plants and trees to thrive, start ‘em out right. Using both

near-the-surface and deep root watering encourages roots to grow deep

and stay safely below the surface. The equation is simple: water + oxygen +

vital nutrients = healthy root systems. Developed to meet this challenge, the

RZWS Root Zone Watering System features Hunter’s patented StrataRoot

design. It’s a series of internal baffles that delivers water where it’s needed

most. Design also lends rigidity to the irrigation cylinder

to facilitate installation. Comes pre-assembled to save

time. Better still, the enclosed design and grate protect

irrigation hardware from vandalism. To find the right

solution, sometimes you just have

to dig deep.

In sandy soil conditions, the optional RZWS sleeve

keeps the interior free from soil intrusion.

10” (0.25 m) RZWS 18” (0.46 m) RZWS 36” (0.9 m) RZWS

RZWS Root Zone Watering System

RZWS

StRataRoot SyStem DeliveRS WateR to RootS at all Soil DepthSEliminate wasteful run-off by putting water right where it’s needed: in the ground, at the roots.

•ReliableHunterBubbleravailablewith0.25GPM(0.946l/min)or0.50GPM(1.89l/min)flow.

•Roughplasticmeshallowswater,air,andnutrientsto bypass dense soil and directly reach root systems.

•StrataRootdeliverswatertoalllevelsofthetreeorshrub’s root system, near the surface and deep down.

•Ruggedremovableendcapallowseasyserviceability of bubblers and check valves.

Air flow

patented StrataRoot design:Innovative internal baffle system distributes water near the surface and down deep to foster roots.

pre-assembled watering system:Each unit is ready to go for fast installation.

premium pressure-compensating bubbler:Twobubbleroptions:0.25GPM(0.946l/min) or0.50GPM(1.89l/min).

Built-in swing joint on bubbler models:Maximumflexibilityandeasyinstallation.

Sturdy removable end cap:ProtectstheRZWSyetallowsbubblerand check valve to be serviced.

long-lasting pre-installed check valve option:Valve prevents low-head drainage.

optional fabric filter sleeve:Keeps sandy soil out of the irrigation well.

optional reclaimed end cap

pRoFeSSioNal laNDSCape DRipliNe tUBiNG SpeCiFiCatioNBUilDeR

moDel FloW SpaCiNG leNGthplD (250’, 1,000’) 0.4

0.61.0BLNK (Blank)

12”18”24”

250’1,000’

plD (100’) 0.61.0BLNK (Blank)

12”18”

100’

plD 04 12 250

EXAMPLE plD – 04 – 12 – 250

SpeCiFiCatioNBUilDeRmoDel leNGth BUBBleR

FloW RateoptioNS

RZWS = Root Zone Watering System

RZWS-SleeveField installed sleeve made from landscape fi lter fabric

RZWS-CapReplacement cap for all RZWS models

10 = 10”18 = 18”36 = 36”

25 = .25 GPM50 = .50 GPM

Cv = Check ValveR = Reclaimed

RZWS 18 25 Cv

EXAMPLE RZWS - 18 - 25 - Cv

SpeCiFiCatioNBUilDeRmoDel FloW SpaCiNG leNGth patteRN

plD 0.40.61.0BLNK (Blank)

12”18”24”

250’1,000’

a = Adjustablet = Third-CircleQ = Quarter-Circleh = Half-Circlett = Two-Thirds-CircletQ = Three-Quarter-CircleF = Full-Circle

plD 04 12 250 h

Note: Bodies and nozzles sold separately. Also compatible with Hunter’s bubbler and specialty nozzles. * 17 Series available in Adjustable, Quarter, and Half-Circle patterns only.

plD – 04 – 12 – 250

plD – 04 – 12 – 250

EX

AM

PLE

plD 04 12 250

SpeCiFiCatioNBUilDeR

plD

0.40.61.0BlNK (Blank)

12”18”24”

250’1,000’

moDel FloW SpaCiNG leNGth

EX

AM

PLE

plD – 04 – 12 – 250

EX

AM

PLE

plD 04 12250

plD

0.40.61.0BlNK (Blank)

12”18”24”

250’1,000’

moDel FloW SpaCiNGleNGth

Adjustable arc, 50-360 degrees, plastic riser, with Check ValveR = Adjustable arc, 50-360 degrees, plastic riser, with Check Valve and reclaimed water IDSS = Adjustable arc, 50-360 degrees, stain-less riser, with Check ValveSS-R = Adjustable arc, 50-360 degrees, stainless riser, with Check Valve and reclaimed water IDSS-HS = High Speed, ADJ arc, 50-360 degrees, stainless riser, with Check ValveSS-HS-R = High Speed, ADJ arc, 50-360 degrees, stainless riser, with Check Valve and reclaimed water ID

B = BSP Inlet04-28 = Factory installed nozzle number

Charts and Specs

LIT-403 10/08

Hunter Industries Incorporated1940 Diamond Street, San Marcos, California 92078www.HunterIndustries.com