Upload
haphuc
View
229
Download
2
Embed Size (px)
Citation preview
R O T O R S S P R A Y S V A L V E S C O N T R O L L E R S S E N S O R S C E N T R A L C O N T R O L S M I C R O RZWSRoot Zone Watering System
RZWS
Large & Small Trees
Small Trees,Large Bushes& Shrubbery
Shrubbery
36" RZWS18" RZWS
10" RZWS
If you want young plants and trees to thrive, start ‘em out right. Using both
near-the-surface and deep root watering encourages roots to grow deep
and stay safely below the surface. The equation is simple: water + oxygen +
vital nutrients = healthy root systems. Developed to meet this challenge, the
RZWS Root Zone Watering System features Hunter’s patented StrataRoot
design. It’s a series of internal baffles that delivers water where it’s needed
most. Design also lends rigidity to the irrigation cylinder
to facilitate installation. Comes pre-assembled to save
time. Better still, the enclosed design and grate protect
irrigation hardware from vandalism. To find the right
solution, sometimes you just have
to dig deep.
In sandy soil conditions, the optional RZWS sleeve
keeps the interior free from soil intrusion.
10” (0.25 m) RZWS 18” (0.46 m) RZWS 36” (0.9 m) RZWS
RZWS Root Zone Watering System
RZWS
StRataRoot SyStem DeliveRS WateR to RootS at all Soil DepthSEliminate wasteful run-off by putting water right where it’s needed: in the ground, at the roots.
•ReliableHunterBubbleravailablewith0.25GPM(0.946l/min)or0.50GPM(1.89l/min)flow.
•Roughplasticmeshallowswater,air,andnutrientsto bypass dense soil and directly reach root systems.
•StrataRootdeliverswatertoalllevelsofthetreeorshrub’s root system, near the surface and deep down.
•Ruggedremovableendcapallowseasyserviceability of bubblers and check valves.
Air flow
patented StrataRoot design:Innovative internal baffle system distributes water near the surface and down deep to foster roots.
pre-assembled watering system:Each unit is ready to go for fast installation.
premium pressure-compensating bubbler:Twobubbleroptions:0.25GPM(0.946l/min) or0.50GPM(1.89l/min).
Built-in swing joint on bubbler models:Maximumflexibilityandeasyinstallation.
Sturdy removable end cap:ProtectstheRZWSyetallowsbubblerand check valve to be serviced.
long-lasting pre-installed check valve option:Valve prevents low-head drainage.
optional fabric filter sleeve:Keeps sandy soil out of the irrigation well.
optional reclaimed end cap
pRoFeSSioNal laNDSCape DRipliNe tUBiNG SpeCiFiCatioNBUilDeR
moDel FloW SpaCiNG leNGthplD (250’, 1,000’) 0.4
0.61.0BLNK (Blank)
12”18”24”
250’1,000’
plD (100’) 0.61.0BLNK (Blank)
12”18”
100’
plD 04 12 250
EXAMPLE plD – 04 – 12 – 250
SpeCiFiCatioNBUilDeRmoDel leNGth BUBBleR
FloW RateoptioNS
RZWS = Root Zone Watering System
RZWS-SleeveField installed sleeve made from landscape fi lter fabric
RZWS-CapReplacement cap for all RZWS models
10 = 10”18 = 18”36 = 36”
25 = .25 GPM50 = .50 GPM
Cv = Check ValveR = Reclaimed
RZWS 18 25 Cv
EXAMPLE RZWS - 18 - 25 - Cv
SpeCiFiCatioNBUilDeRmoDel FloW SpaCiNG leNGth patteRN
plD 0.40.61.0BLNK (Blank)
12”18”24”
250’1,000’
a = Adjustablet = Third-CircleQ = Quarter-Circleh = Half-Circlett = Two-Thirds-CircletQ = Three-Quarter-CircleF = Full-Circle
plD 04 12 250 h
Note: Bodies and nozzles sold separately. Also compatible with Hunter’s bubbler and specialty nozzles. * 17 Series available in Adjustable, Quarter, and Half-Circle patterns only.
plD – 04 – 12 – 250
plD – 04 – 12 – 250
EX
AM
PLE
plD 04 12 250
SpeCiFiCatioNBUilDeR
plD
0.40.61.0BlNK (Blank)
12”18”24”
250’1,000’
moDel FloW SpaCiNG leNGth
EX
AM
PLE
plD – 04 – 12 – 250
EX
AM
PLE
plD 04 12250
plD
0.40.61.0BlNK (Blank)
12”18”24”
250’1,000’
moDel FloW SpaCiNGleNGth
Adjustable arc, 50-360 degrees, plastic riser, with Check ValveR = Adjustable arc, 50-360 degrees, plastic riser, with Check Valve and reclaimed water IDSS = Adjustable arc, 50-360 degrees, stain-less riser, with Check ValveSS-R = Adjustable arc, 50-360 degrees, stainless riser, with Check Valve and reclaimed water IDSS-HS = High Speed, ADJ arc, 50-360 degrees, stainless riser, with Check ValveSS-HS-R = High Speed, ADJ arc, 50-360 degrees, stainless riser, with Check Valve and reclaimed water ID
B = BSP Inlet04-28 = Factory installed nozzle number
Charts and Specs
LIT-403 10/08
Hunter Industries Incorporated1940 Diamond Street, San Marcos, California 92078www.HunterIndustries.com