Upload
nguyenliem
View
220
Download
4
Embed Size (px)
Citation preview
www
RotoFlex Sit and Rise bed
www.specialbed.net
IntegrationQuality of life
Mobility
Independence
The special bedfrom Germany
Patented and certifi ed
©Fi
xPun
kt.N
urem
ber
g.1
1.20
06.3
6001
.010
425
www
The RotoFlex Sit and Rise bed which allows you to get out of bed unhindered.
Sitting up and sitting on the edge of the bed can produce invisible obstacles if you have
limited mobility or if you cannot use your full muscle power for health reason. To date these
obstacles have only been overcome with external help.
The RotoFlex Sit and Rise bed overcomes the invisible obstacle which separates lying in bed
from life beyond the bed. Four powerful, reliable motors lift you gently to the bed edge at
the press of a button.
The RotoFlex Sit and Rise bed moves you from a reclining position to a sitting position on the
bed edge. You are now ready to stand up or to move, for example, to a wheelchair.
The RotoFlex Sit and Rise bed is also a rehabilitation and care bed to facilitate active and
passive mobilisation.
The long-term bedridden can be mobilised into the sitting position without having to leave
their bed, similar to normal mobilisation in chairs in a care situation.
Sitting the patient up and mobilising him is easy and does not strain the back of the carer or
the patient.
The RotoFlex Sit and Rise bed is designed for use in the patient’s domestic situation and for
care homes. It is used instead of slatted bedbases in existing single and double beds.
The patient‘s normal private environment is maintained.
It is possible to lead an independent life again or to receive care at home.
DIWAN model as a double bed in natural beech fi nish, one side with RotoFlex® insertion bed RO-1001E
RotoFlex Sit and Rise bed
www.specialbed.net
– the Sit and Rise bed
©Fi
xPun
kt.N
urem
ber
g.1
1.20
06.3
6001
.010
425
www
RotoFlex Sit and Rise bed
www.specialbed.net
– the complete care bed
To support you when sitting up, you can manoeuvre the RotoFlex Sit and Rise bed‘s lying
surface into the sitting position. Now you can either stand up, be helped to stand or sit as in
an easy chair.
By being in the sitting position you can face the room and be more fully involved in your usual
environment: sit with relatives, watch television, have a view towards the window, etc…
You can control all the movements of the RotoFlex Sit and Rise bed using a remote-
controlled device. You can move the 5-part lying surface infi nitely to your desired lying
position.
The RotoFlex Sit and Rise bed fulfi ls all the functions of a complete care bed. It is free-
standing, completely stable and does not not wobble. When used as a double bed, the
carer can gain access to you from all sides. The RotoFlex Sit and Rise bed can be adjusted to
wheelchair height for transfer.
The innovative design of the RotoFlex Sit and Rise bed and the hygienically clean
materials have proved for years that the excellent level of quality is maintained even after
much use.
The RotoFlex Sit and Rise bed saves expense and allows more time to be spent on the human
aspect of caring.
©Fi
xPun
kt.N
urem
ber
g.1
1.20
06.3
6001
.010
425
www
RotoFlex Sit and Rise bed
www.specialbed.net
Sit and Rise bed – available in two versions
• The RotoFlex RO-1001E is a stand-alone system, which we supply either as a bedframe
module for an existing bed or as a complete bed with bed frame in different wood fi nishes.
It is also possible to supply a bedframe module for a double bed. Please note, however,
that the bedframe edge on the side you get out of bed must be lowered to a height of
20 cm otherwise it is not possible to operate the turning function for the vertical position.
You can also fi t an existing side panel with our special lowering fi tting so that the side of the
bed is only lowered to allow the patient to stand up.
• The RotoFlex RO-1002P Sit and Rise bed on castors under which other equipment can be
rolled and which is particularly suitable for patients who need further aids, such as a lifter, to
transfer them from bed to the wheelchair, for example. When the bed has manoeuvred the
patient into a sitting position, he is in an optimal position for transfer and the carer‘s work is
made easier. We also recommend this version for care homes where beds need to be easily
moved.
This version is also available with a bed gantry, which is, however, not usually necessary for
mobilising the patient in the RotoFlex bed.
The RotoFlex RO-1002P is also available as a double bed.
Both versions of the RotoFlex should be fi tted with one or two grab handles to support the
patient to stand up independently. The grab handles can be swivelled upwards so that they
are not in the way when transferring the patient from the side of the bed. Orders should state
to which side of the bed the handles should be attached and the number of handles
depending on the patient‘s symptoms.
In addition, both versions of the RotoFlex must be fi tted with a special RotoFlex mattress,
which for safety reasons is anchored to the RotoFlex and comes in two parts. This is the only
way that we can guarantee that the feet are suffi ciently supported when lying down and that
the feet reach the fl oor properly to allow the patient to stand. All our mattresses are 11 cm
thick and are covered with a high-quality incontinence cover. This protects the interior of
the mattress from moisture, and is at the same time breathable, elastic and washable. The
interior of the standard mattress is made of R 35/45 foam, which is comfortable to lie on and
gives good support. We aim to achieve a high level of comfort on a viscoelastic mattress, it
has point-by-point elasticity and is light and is the best fi t for the RotoFlex’s lavish moulding.
If you require a cold foam mattress with TEMPUR support for decubitus prophylaxis, we can
also supply an alternating air pressure mattress but due to the good general mobilisation of
patients in the RotoFlex bed, is it usually not necessary.
©Fi
xPun
kt.N
urem
ber
g.1
1.20
06.3
6001
.010
425
www
The remote control can be locked on request.
RotoFlex Sit and Rise bed
www.specialbed.net
– RO-1002P
IntegrationQuality of life
Mobility
Independence
The RotoFlex Sit and Rise bed with cover,
RONDO natural beech fi nish wood surround
or white lacquer, with castors, can also be
supplied without cover and without wood
surround in sizes 90 x 200/210 cm,
100/120 x 210 cm and special lenght
220/230 cm.
45 to 95 cm
©Fi
xPun
kt.N
urem
ber
g.1
1.20
06.3
6001
.010
425
www
RotoFlex Sit and Rise bed
www.specialbed.net
– RO-1001 with “DIWAN” model bed frame
The RotoFlex Sit and Rise bed as a domestic care bed in sizes 90/100 x 190/200 cm,
120 x 200 cm, as a double bed in 180 x 200 cm or special lenght 210/220/230 cm.
Can also be supplied without wood surround as bed insertion RO-1001E.
©Fi
xPun
kt.N
urem
ber
g.1
1.20
06.3
6001
.010
425
www
RotoFlex Sit and Rise bed
www.specialbed.net
– the mattresses
Cold foam bed with anchor system:
removable incontinence cover with
3-sided zip fastener, breathable
and PU-covered
Mattress
Cold-foam bed with anchor system
70 - 80 mm
40 mm
There is a choice of various mattresses for the RotoFlex Sit and Rise bed. Whether these
be cold foam, tempur or visco-elastic mattresses, all have a removable, breathable and
PU-covered incontinence cover with a zip fastening on 3 sides and an anchor system. This
prevents the mattress from slipping when it is moved into the various lying, sitting and vertical
positions.
Mattresses can be supplied in the following sizes: 90 x 190 cm, 90 x 200 cm, 100 x 190 cm
and 100 x 200 cm. A size of 120 x 200 cm and many other special sizes are also available.
The illustration shows the structure of our mattresses:
©Fi
xPun
kt.N
urem
ber
g.1
1.20
06.3
6001
.010
425
www
RotoFlex Sit and Rise bed
www.specialbed.net
– Information for doctors
The RotoFlex Sit and Rise bed is a medical aid in compliance with the German Medical Product Law (MPG) and the German Code of Social Law V (SGB V) § 33 (Aid device no. 19.40.03.3001) and the German Code of Social Law XI (SGB XI) § 40 (Care aid device no. 50.45.03.3001).
The RotoFlex has been used for many years very successfully in domestic and institutional
care situations. With the RotoFlex Sit and Rise bed, patients regain the ability to get out of bed completely independently or with minimal support. The patient can participate more actively and more frequently in life and he moves more regularly.
The aim of medical therapy and treatment is to increase and maintain the patient’s levels of mobility. This requirement is fulfi lled in many ways when the RotoFlex Sit and Rise bed is used and is therefore a prescribable aid device in accordance with SGB V § 23.1. Patient experience verifi es that with the Rotofl ex bed in addition to physical help, important psychological support is also received.
Doctors are specialists in diagnosing and determining therapy for patients. It is their respon-sibility to prescribe aids which are suited to improving and maintaining their patients’ physical and mental/psychological health. (SGB V § 23.1.1 + 3; SGB V § 27.1 + .2). This includes the reintegrating the patient as extensively as possible in his world to reduce psychological stress.
Prescription:Doctors must check assistance aids before prescribing them to fi nd out about their basic functions in order to best support the therapy and treatment of patients. These basic
functions are to be indicated in the prescription or appendix. Prescribing the RotoFlex Sit and
Rise bed in accordance with the instructions given by health insurers can be considered when:
• there is an indication for an insertion frame or care bed with lying height adjustment,• requirement for the lying surface to be able to swivel and put into a sitting position,• other measures or alternative provision options are ruled out,• the insured patient is able to get into/out of bed independently when using the
product.
The aids prescribed by the doctor do not affect his/her budget for medicines and remedies.
Prescription example:bed-in-a-bed system with electrical-mechanical aid for standing up (aid device no. 19.40.03.3001 and care aid device no. 50.45.03.3001) in accordance with the appendix.
Example of certifi cate:Mr/ Ms..... is on account of his/her present symptoms is at present not, or only rarely, able to get into and out of bed without help. In order to ensure an acceptable provision of care, it is necessary to have a bed which will raise Mr/Ms and put him/her into a sitting position and which will manoeuvre him/her from a sitting position into a lying position. The mobility of Mr/Ms… will be maintained and may even be increased as a result, or will be achieved for the fi rst time. The patient will not require constant help from others when getting in and out of bed.
Attachment: product description of the RotoFlex Sit and Rise bed with pictures.
©Fi
xPun
kt.N
urem
ber
g.1
1.20
06.3
6001
.010
425
www
RotoFlex Sit and Rise bed
www.specialbed.net
– Indications
The RotoFlex Sit and Rise bed is an aid which is indicated for patients,
• who cannot sit up on their own in bed or cannot move themselves in bed to get out of bed
or mobilise or sit on the edge of bed
• who have to be moved without damaging the carer to allow them to stand up or mobilise
• for whom home care must remain possible by using the RotoFlex Sit and Rise bed,
reducing the physical strain on the home carer
The benefi ts of having a RotoFlex Sit and Rise bed are:
• the mobility of the patient is maintained or increased
• the on-going effort of caring for the patient is reduced
• pressures resulting from lying down for long periods are reduced
• mental agility and physical mobility are supported
• the long-term bedridden patient re-establishes a day-night rhythm by changing his lying
and sitting position
The Indication for the RotoFlex Sit and Rise bed applies to all illnesses and handicaps where
the patient does not have freedom of movement to stand up from a lying or sitting
position either with or without help. This is because he has problems with his joints,
decreasing muscle strength or pain and his mobilisation needs may physically overtax the
carer‘s own health.
e.g. with the following syndromes:
rheumatic symptoms, multiple sclerosis, osteoporosis, Parkinson‘s, hemi, para, tetraplegia,
Apallic syndrome, fi nal stages of Aids, fi nal stages of cancer, heart failure
In cases of physical weakness, the RotoFlex Sit and Rise bed aids rehabilitation and
mobilisation.
©Fi
xPun
kt.N
urem
ber
g.1
1.20
06.3
6001
.010
425
www
• can stand up again independently
• patient can stand up on his own in spite of expected deterioration of condition
• can be passively mobilised again, e.g. in the case of osteoporosis or spinal column metatasis if transfer to an easy chair is no longer possible
• does not need a place in a care home and can stay at home to receive care there
• in the case of insured persons who are mobility impaired, particularly patients with quadrant syndrome symptoms with the increased risk of developing decubitus, and for further treatment of existing decubitus
• in cases of being bedridden on account of chronic (neuro-) muscular illnesses combined with the inability to sit up, transfer or stand up without help, if circulatory training is also required; for osteoporosis and thrombosis prophylaxis
• if care must be carried out on the patient entirely or in part in bed
• in the case of tetraplegia or advanced muscular dystrophy maintaining the rest of legs, above all when regular changes of position for the upper body and legs are required
• to facilitate independent transfer from the bed to a wheelchair
• to facilitate independence in standing up
• to facilitate and support standing up in cases of severely limited movement, and stress on the lumbar vertical spine and the joints
• for patients who are easily exhausted
• in cases of spasms occuring as a result of passive movement
• for mobilisation for patients suffering from Apallic syndrome
• for mobilisation in extreme symptoms of pain when passive movement occurs
• sitting position, e.g. in cases of heart failure
• to stimulate circulation without transferring to an easy chair
RotoFlex Sit and Rise bed
www.specialbed.net
– Indications
©Fi
xPun
kt.N
urem
ber
g.1
1.20
06.3
6001
.010
425
www
RotoFlex Sit and Rise bed
www.specialbed.net
– The nicest handicapped bed in the world
• for privat use at home
• for hotels with handicapped travellers
• for ships with handicapped travellers
• for hospitals with rehabilitations-hotels and areas
©Fi
xPun
kt.N
urem
ber
g.1
1.20
06.3
6001
.010
425
www
RotoFlex Sit and Rise bed
www.specialbed.net
Patients who are no longer able to stand up alone require intensive mobilisation at least twice
a day (sitting in their chair). Moving a patient from the bed to a chair is carried out by one or
two members of the care staff. The time required to do this requires approximately 5 to
6 minutes twice a day per carer.
With the RotoFlex Sit and Rise bed, the
patient can stay in bed as the RotoFlex Sit
and Rise bed can be moved into a sitting
position by using a hand-held device. This
means that the patient can sit up in bed or on
the edge of the bed in the same way as he
would sit in an easy chair or on a chair at a
table. Many patients can operate the
RotoFlex Sit and Rise bed without assistance,
meaning that they do not need a carer to help them to sit up. Mobilisation can then be
achieved several times a day. If the patient does not have the mental capacity to use the
control device, only one carer is needed for mobilisation.
As only one person is needed to care for bedridden patients, carers do not have to arrange
times to mobilise patients together. In addition, the RotoFlex Sit and Rise bed can also be
operated by the patient’s visitors. This means that the RotoFlex Sit and Rise bed requires a
maximum of one carer for mobilisation. This saves at least half the costs associated with
mobilisation (one carer instead of two).
The RotoFlex Sit and Rise bed is well worth the initial fi nancial outlay as it saves time and has
other positive advantages:
It is no longer necessary to acquire a conventional nursing bed which does not correspond
to technical standards.
Carers no longer have to carry out heavy physical lifting and so the risk
of recurring inability to work and
premature termination of their career is avoided
– Sit and Rise bed – lowers the cost of caring
©Fi
xPun
kt.N
urem
ber
g.1
1.20
06.3
6001
.010
425
www
RotoFlex Sit and Rise bed
www.specialbed.net
1900
- 2
200
mm
550mm
200mm
900 - 1000mm
– Sit and Rise bed – the fl oor space required for RO-1001 and 1002
The minimal distances to be maintained to
the bed edge are measured on the interior
sides of the bed edge.
400
360
Mod
ell R
O-1
001
in m
m:
Mod
ell R
O-1
002
in m
m:
only bysingle bed
©Fi
xPun
kt.N
urem
ber
g.1
1.20
06.3
6001
.010
425
www
900mm
835mm350mm
195mm
1900mm
1285mm350mm
195mm
345mm
270mm
The measurements in millimetres are the
interior measurements of the bed edge to be
complied with.
The sitting height depends on the height of
the upper edge of the side panel .
Sitting height
– mattress height
– 165 mm
= upper edge of side panel
and gap in the side panel.
RotoFlex Sit and Rise bed
www.specialbed.net
Sit and Rise bed – dimensions of the bed edge of model RO-1001
©Fi
xPun
kt.N
urem
ber
g.1
1.20
06.3
6001
.010
425
www
We are delighted to offer you many fi nishes
for the RotoFlex Sit and Rise bed:
We have the right bed designed to your
requirements. Whether this be for the
discerning private individual at home, for a
neutral and elegant hospital room, for a
rehabilitation institution or for hospices.
• Frame and covering available in many RAL
colour tones
• Special widths and special heights
• Special hand switch
• Upholstered sidebars
• Various castor systems
RotoFlex Sit and Rise bed
www.specialbed.net
Sit and Rise bed – Special fi nishes
©Fi
xPun
kt.N
urem
ber
g.1
1.20
06.3
6001
.010
425
www
RotoFlex Sit and Rise bed
www.specialbed.net
Sit and Rise bed – Technical features and dimensions
Technical data RO-1002PCan be used for bed sizes: 90 x 200/210cm
Dimension 100 X 210/220 cm
Raises upper body to 85°
Raises legs with knee-break 40°
Lying surface rotable to 90°
Option of turning setting right or left
Support to sit up with help to stand up yes
Sitting function / with thigh lift yes / no
Min. installation height, upper edge of slatted
frame
40 cm
Max. height of upper edge of slatted frame 85 cm
Adjustment range for sitting and lying height 40 cm
Rec. mattress thickness 11cm – 15 cm
Feet can be adjusted to 25 mm
Patient weight 140 kg (complete)
Safe load 170 kg
Surface powder-coated
Elec. connection 220 V~/ 0,6 A, 24 V-, internal network
or with 110 V~/ 0,6 A, 24 V-,
internal network
Protection class II, IPX4
Noise level ≤ 65dB(A)
Ambient conditions RO-1002PRoom temperature from +10° bis +40°C
Rel. humidity from 30% bis 75%
Air pressure from 700hPa bis 1060hPa
Accessories:• Mattress with anchor system 11 to 15 cm, thickness as required• Pull handle with trapeze bar (only RO-1002)• Incontinence mattress covers• Bed surrounds• automatic side panel retraction• extra long feet (170 mm)
CE compliant with the 93/42/EEC Guideline. Patents pending.
A product from PhysioNova® GmbH.
©Fi
xPun
kt.N
urem
ber
g.1
1.20
06.3
6001
.010
425
www
RotoFlex Sit and Rise bed
www.specialbed.net
– Price list model RO-1002
Order no. Rotofl ex® Sit and Rise bed, 5-part lying surface with cover, wood surround RONDO beech and castors Ø 100mm
in EUR incl.VAT
RO-1002P-R0920 rotates to the right, 90 x 200 cm 14,750
RO-1002P-L0920 rotates to the left, 90 x 200 cm 14,750
RO-1002P-R0921 rotates to the right, 90 x 210 cm 14,750
RO-1002P-L0921 rotates to the left, 90 x 210 cm 14,750
Rotofl ex® Sit and Rise bed, 5-part lying surface, with cover and castors Ø 100mm, without wood surround for own design
RO-1002-R0920 rotates to the right, 90 x 200 cm 13,300
RO-1002-L0920 rotates to the left, 90 x 200 cm 13,300
RO-1002-R0921 rotates to the right, 90 x 210 cm 13,300
RO-1002-L0921 rotates to the left, 90 x 210 cm 13,300
Standard Rotofl ex® Sit and Rise bed, consisting of:
RO-1002-PSB RotoFlex Sit and Rise bed RO-1002P on castors with cover and wooden surround RONDO 1 visco-elastic mattress in an incontinence cover with 3-sided zip fastener, with anchor system for RotoFlex Sit and Rise bed2 grab handles can be swivelled for use on left or right1 fi tted sheet, towelling, 2-part
17,200
Rotofl ex® Sit and Rise bed Hospital Version, consisting of:
RO-1002-HHOSPITAL
RotoFlex Sit and Rise bed RO-1002H on castors with central brake sys-tem, wooden/steel surround RONDO STEEL 1 visco-elastic mattress in an incontinence cover with 3-sided zip fastener, with anchor system for RotoFlex Sit and Rise bed2 grab handles can be swivelled for use on left or right1 fi tted sheet, towelling, 2-part
18,200
Mattresses with incontinence cover, breathable and removable, PU-covered. Specify mattress dimensions: 90/100 x 190/200cm can be combined
RO-Z2001-35 Cold foam mattress with anchor system, RG 35/45 standard 620
RO-Z2001-40 Cold foam mattress with anchor system, RG 40/55 700
RO-Z2001-50 Cold foam mattress with anchor system, RG 65/40 770
RO-Z20T1-(W, N, or F)
Cold foam mattress with tempur overlay (soft, standard or fi rm) with anchor system
2,380
RO-Z20V1-N Cold foam mattress with visco foam overlay and anchor system 1,450
RO-Z2011 Fitted bed sheet, towelling, two-part 100
Accessories
RO-Z2002 Grab handle, folds away, right 294
RO-Z2003 Grab handle, folds away, left 294
RO-Z2004 1/32 Pull handle with height adjustable trapeze bar 240
RO-Z2006 Feet (for fi xed installation) 270
©Fi
xPun
kt.N
urem
ber
g.1
1.20
06.3
6001
.010
425
www
RotoFlex Sit and Rise bed
www.specialbed.net
– Price list model RO-1002
RO-Z2026 Knee-break adjustment between 0° - 45° lowered downwards 520
RO-Z2091 Connection to network by remote control 270
RO-Z2306 Infra-red remote control on request
RO-Z2305 Emergency battery power supply (to allow the bed to be returned to a lying position if the power fails)
800
Bed surrounds
RO-Z2022 Bed surround, beech fi nish, part-solid, model RONDO, 90 x200/210 cm 1,760
RO-Z2023 Bed surround, beech fi nish, part-solid, model DIWAN, 90 x 200/210 cm 2,020
Choice of fi nishes, natural beech, alder, oak, ash, white ash and white laminate
RotoFlex Sit and Rise bed: special sizes on request
Bed surrounds: veneers and sizes on request
Extras
RONDO head/footboard with own motif (e.g. photo), covered with washable and weather-tight foil and reinforced edges. Approx. price according to number and panels, for 2 panels, on requestPlease send us your desired motif and will check if it can be used.
approx. 1,280
RO-Z2008 Special length 210/220/230, per every 10 cm supplementExtension at footend
+ 3%
Bed surrounds
RO-Z022-90 Bed surround, beech fi nish, part-solid, model RONDO, 90/100 x 190/200 cm 2,370
RO-Z022-120 Bed surround, beech fi nish, part-solid, model RONDO, 120 x 200 cm 2,730
RO-Z022-180 Bed surround, beech fi nish, part-solid, model RONDO, 180 x 200 cm 2,950
RO-Z022-180 M Bed surround, beech veneer, part-solid, model RONDO, 180 x 200 cm 4,400
RO-Z023-90 Bed surround, beech fi nish, part-solid, model DIWAN, 90/100 x 190/200 cm 2,900
RO-Z023-120 Bed surround, beech fi nish, part-solid, model DIWAN, 120 x 200 cm 3,450
RO-Z013 Automatic side panel retractable to fi t existing bed surround (is screwed on the inside at the head and footend, side face may need to be reduced slightly)
380
RotoFlex Sit and Rise bed: Special sizes on request
Bed surrounds: veneers and sizes on request
Choice of fi nishes, natural beech, alder, oak, white ash and white laminate
©Fi
xPun
kt.N
urem
ber
g.1
1.20
06.3
6001
.010
425
www
www.specialbed.net
PhysioFlex Rise bed
PHYSIOFLEX® Rise bed – the care insertion bed, suitable for your bed at home
The PhysioFlex Rise bed is a height-adjustable insertion care bed which can be simply and retrospectively built into new or existing bedframes with standard insert frames for use both at home or in the care home environment.
It more than fulfi lls all the functions required of a care bed – while preserving the look and feel of the patient‘s usual private environment.
The PhysioFlex Rise bed is free-standing, completely stable and does not wobble. It lowers to at least 28 cm and can be adjusted to a height of 38 cm allowing it to be used as a standard bed as well as a care bed. The ground clearance can be adjusted infi nitely so that lifters can also be inserted beneath the bed.
• 4-part lying surface, infi nitely adjustable, with three quiet motors• raises the legs with a knee-break of 60° to allow bed to be raised in stages, especially
suitable for patients with slipped discs• the patient can operate all settings using a cable remote control• only extremely durable, high quality materials for long-lasting quality are used for the
PhysioFlex Rise bed, such as durable fi bre-glass reinforced connectors in pivots for the sprung frame
• the PhysioFlex Rise bed is completely hygienic and can be used again once a patient has fi nished with it
• can be used with bed sizes 90/100 x 190/200 cm• fulfi ls more functions than a standard care bed• can be adjusted to the height of a care bed• can be used with almost any single or double bed• looks like your normal bed as it can be lowered to standard bed height – maintaining the
look of your usual domestic environment
The PhysioFlex Rise bed is supplied in two parts and can be
transported and quickly assembled by one person.
Its excellent features ensure that it will last a long time.
©Fi
xPun
kt.N
urem
ber
g.1
1.20
06.3
6001
.010
425
www
www.specialbed.net
PhysioFlex Rise bed
PHYSIOFLEX® Rise bed – Technical FeaturesRO-1001E and RO-1002P
Technical data PhysioFlex Rise bedCan be used for bed sizes 90/100/120 x 190/200 cm (without raising aid 180 cm)
Insertion bed, external dimensions Lying surface approx. – 4cm
Lying surface 4-part
Head end raises mechanically (optional)
Raises upper body to 85°
Raises legs with knee-break of up to 60° (step bed)
Min. installation height, upper edge of
slat frame
28 cm
Max. height, upper edge of slat frame approx. 67/80 cm (as per bedfoot height setting)
Unladen weight 52 kg/ 16 kg (2-part)
Load 170 kg (or optional 300 kg)
Surface Powder-coated surface
Elec. connection 220V/50Hz, 24 V motors
Fuse protection 1,6A, IPX44, initial fail-safe
Design options:
• Foot options:
Feet adjustable from 25 mm to160 mm (hoist can slide under bed)
• Wheel options:
Castors Ø: 50 mm, 75 mm or 100 mm, 2 castors each with brake
Accessories:
• Bed gantries with trapeze handle, can be used on the right or the left at the head end
• Cot sides can be raised and folded, move with lying surface
• Standard mattress or mattress with anchor system
• Connection to mains network / emergency lowering
CE complies with 93/42/EEC guideline.
A product from PhysioNova® GmbH.
©Fi
xPun
kt.N
urem
ber
g.1
1.20
06.3
6001
.010
425
www
www.specialbed.net
Notes
©Fi
xPun
kt.N
urem
ber
g.1
1.20
06.3
6001
.010
425
Direction of turn required
Left Right
Required side for handle to be fi xed
Left Right Both sides
Bed width required
90 cm Special sizes: cm
Bed lenght required
200 cm 210 cm Special sizes: cm
Height and weight of the patient
cm kg
– Order form RO-1002
Dealer Dealer stamp
Date
Commision
Sales representative
Model no.
Customer
First name/Surname:
Street
Postcode/town
Telephone during the day
Mattresses
Cold foam mattress With viscofoam cover With tempur overlay
Alternating pressure mattress Fitted bed sheet, towelling
Accessories
Feet Pull handle Emergency battery power supply
Knee-break adjustment Connection to network by remote control
Bed surrounds
Model RONDO Model DIWAN Only bedframe
Automatic side panel retractable
Colour/fi nishes
Natural beech Alder Oak
White ash White laminate Veneer
Services
Supply and assembly by our service team
Copy, fi ll in and send by fax to +49 - 911 - 22 28 27
Notes