Upload
dylan-yerton
View
230
Download
0
Tags:
Embed Size (px)
Citation preview
Rotary Motion
A Pulley Mechanism uses rotary motion to transmit rotary motion between two parallel shafts.
Mechanisms using Rotary Motion
Pulley mechanisms can be used to increase or decrease rotary velocity
Velocity Ratio Velocity Ratio =
Distance moved by Effort
Distance moved by Load
Velocity Ratio =
Distance moved by the driver pulley
Distance moved by the driven pulley
Velocity Ratio = Diameter of Driven Pulley
Diameter of Driver Pulley
Velocity Ratio
Pulley Shaft Rotary Velocities can be calculated using the following formula
rotary velocity of driven pulley x diameter of driven pulley =
rotary velocity of driver pulley x diameter of driver pulley
rotary velocity of driven
pulley =
rotary velocity of driver pulley
x diameter of driver pulley
diameter of driven pulley
What is the rotary velocity of the driven pulley shaft?
rotary velocity of driven
pulley =
rotary velocity of driver pulley
x diameter of driver pulley
diameter of driven pulley
= 450 x 3090
revs/min
= 150 revs/min
Pulleys and Belts
A section through a grooved pulley and
round belt
Vee pulley and section through a vee pulley and belt
Stepped cone pulleys provide a range of shaft speeds
Flat belts and
pulleys
A section through a flat pulley and belt
Flat belt in use on a threshing
machine
Jockey pulley in use
Chains and sprockets
Bicycle chain and sprockets
Graphical symbols
Velocity Ratio = number of teeth on the driven
sprocket number of teeth on the driver sprocket
= 12
36
= 1 : 3
Example
Pulleys and Lifting Devices
The pulley
is a form of Class 1 lever
Movable single pulley
Pulleys
Velocity Ratio =
Distance moved by Effort
Distance moved by Load
Velocity Ratio = the number of rope sections that support the load
Two Pulley System
Velocity Ratio
=
Distance moved by
Effort
Distance moved by
Load
Velocity Ratio
= 2x
x
Velocity Ratio = 2:1
Four Pulley System
Velocity Ratio
=
Distance moved by
Effort
Distance moved by
Load
Velocity Ratio
= 4x
x
Velocity Ratio = 4:1
Cams
Cams
Uses
Pear shaped cams are used in valve control mechanisms
Cams used in a four
cylinder engine
Cam motions
Types of cam follower
Types of cam follower
Springs are used to keep the follower in contact with the cam
Cam Profiles
Displacement graph for a pear shaped cam
Displacement Graphs
Bearings
Thrust Bearings
Bearings
Bearings
• Bronze• Nylon• PTFE• Air• White metal• Cast Iron• Sintered
Gears
Gears
Gears are not only used to transmit motion.
They are also used to transmit force.
Gears
Mechanical Advantage =
Number of teeth on the driven gear
Number of teeth on the driver gear
Velocity Ratio = Gear Ratio =
Number of teeth on the driven gear
Number of teeth on the driver gear
Gears
Gears
Gear Ratio =Product of teeth on the driven gearsProduct of teeth on the driver gears
Gears
Gears
Gears
Gears
Basic Gear Geometry
http://www.sdp-si.com/D190/PDF/D190T25.PDF
The inclined plane
The inclined plane
The inclined plane
Effort required to pull trolley up slope
F = effort E
F = 1000 x sin
F = 1000 x 0.01
F = 10N
E = 10N
sin = 1/100 = 0.01
M.A. = 1000/10
= 100
Follow link to see effects of steeper incline:http://lectureonline.cl.msu.edu/~mmp/applist/si/plane.htm
The screw thread
Screw thread terms
Screw thread forms
Screw thread forms
Screw thread forms
B.S. PD7308
Newton’s Laws
• First Law– A body continues in its state of rest or uniform
motion in a straight line unless compelled by some external forces to change that state.
(sometimes know as the law of inertia)
Newton’s Laws
• Second Law– Rate of change of momentum is proportional to
the applied force and takes place in the direction in which the force acts.
(Continued force means continued acceleration)
Newton’s Laws
• Third Law– To every action there is an equal and opposite
reaction