Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
3
Rotary JointsSeries DQ
22
DQ series Rotary Joints are designed to accommodate a range of manufactu-ring / production applications. These specialized RotaryJoints have exceptionally proven tolerance in a numberof process environments including thermal oil toleran-ce up to 752°F (400°C), and rotational speed toleranceup to 2,000 RPM. Applied uses are commonly found ina variety of specialized industries and processes inclu-ding polymer, lamination and coating applications,paper and textile manufacturing processes includingnon-woven and textile calenders, industrial dryers androtary reaction vessels.
The US and internationally patented DQ system pre-vents the common failure consequence of carboniza-tion and cracking caused by hot thermal oil contactwith atmospheric oxygen. This chemical reactioncreates seal damage that causes the problems of im-proper hot oil and oil vapor discharge.
The specially designed failure avoidance features ofthe DQ system provide unique advantages:Atmospheric oxygen is isolated from the hot oil by abarrier fluid. A cooling unit is used with the DQ ,DQTand DQTX series to cool the barrier fluid using thesame (or compatible) heat transfer medium as in themain circuit. The DQ 5th Generation series requires no extra coolingunit. Instead it uses the existing lubricating oil circuitfrom the production machine. This eliminates the needof the cooling unit and allows considerably higherspeeds. The DQL version does not require a coolingunit because of its temperature limit of 482°F (250°C).
Advantages and Features
Much longer service life than other rotary joints.Longer uninterrupted run-times and no unscheduledmaintenance, since the rotary joint functions is efficiently monitored via the cooling unit.Significantly reduced risk of thermal oil leakage and escape of oil vapors. The primary seal is pressure balanced with a low torque rate A seal protector disk provides protectionagainst penetration by foreign particles. The exter-nally loaded mechanical seal provides added safety protection.The secondary seal is not subject to stress and is protected by the cooled barrier fluid.
The double wall rotor protects the bearings from extended high temperature exposure and prevents energy loss.The functions of the rotary joints are monitored continuously via the control elements on the cooling unit. In case of leakage, production can continue until the next scheduled shut-down due to tempo-rary containment of reusable filtered oil within the cooling unit.
Additional Technical Design Details:
Housing made from spheroidal graphite cast iron (up to 662°F / 350°C) or from high-temperature steel suitable for applications over 662°F (350°C).Unit sizes 1” to 1 1/2” with ball bearings; 2“ to 8“ with self-adjusting tapered roller bearings.DQ and DQT use conditioned oil (cooled and filtered)from the cooling oil loop. No need for re-lubrication.DQL uses high temperature grease for bearing lubrication.A sensor (provided by customer) for monitoring the bearings can be attached to the screw plug of the cooling oil circuit. Quick release K-flange and conical inner rings are used to connect the rotary joint to the roll journal.Radial and axial housing connections are equipped with ANSI standard flanges. DIN or other standards upon request.Barrier fluid connections with internal ISO 228 threads (British standard parallel pipe thread).Prevention of rotation by means of anti-rotation forks that can be mounted at 8 x 45° positions.Static support in the rotor for a rotating inner pipe prevents wear between inner pipe and bushing. For use of one cooling unit for several rotary joints, a flow distributor is recommended to distribute cooling oil evenly to several rotary joints.For further information and safety notations please refer to the Operating Instructions at www.maier-heidenheim.de or www.maieramerica.com. Please call us for user ID and password.
Rotary Joints Series DQ
33
Application data
Ordering instructions
Series
DesignNominal diameter DN inchNominal diameter DN mm
Additional device for cooling and lubtication
Medium
Temperature max °Fmax °C
Pressure PN max psimax bar
Speed max rpm
DQL
1, B21...6
25...150
–
thermal oil
482250
14510
2,000DN (in)
DQ
1, B21...8
25...200
KE, KEW
thermal oil
572300
14510
4,000DN (in)
DQT
1, B21...6
25...150
KE, KEW
thermal oil
662350
14510
4,000DN (in)
DQTX
1, B21...6
25...150
KE, KEW
thermal oil
752400
18913
4,000DN (in)
DQ5
1, B21...8
25...200
–
thermal oil
572300
14510
5,150DN (in)
DQExample: T B 2 50 K –701
Series DQ
DQL up to 482°F / 250°CDQ up to 572°F / 300°CDQT up to 662°F / 350°CDQTX up to 752°F / 400°CDQ5 up to 572°F / 300°C
Nominal diameter DN (=̂ dimension A)1 1 1/4 1 1/2 2 2 1/2 3 1/2 4 5 6 8 (inch)
25 32 40 50 65 80 100 125 150 200 (mm)
K Rotor connection for K-flange
–700 US standard>700 Consecutive numbers for special
designs; numbering by factory.
–100 European standard>100 Consecutive numbers for special
designs; numbering by factory.
Design forB rotating inner pipe with static seal between inlet and outlet
Number of housing connections1 for one-way flow (only upon request)2 for two-way flow
* Speed depends on temperature – for more than 392°F (200 °C) contact us.DN 8’’ and DQ5 upon request. Avoid the combination of maximum values.
25
1300–
32
12002400
40
11002200
50
10002000
65
9001800
80
8001550
100
7001250
125
6001000
150
500825
200
450580
Overspeed limitation
DN
Speed DQ 4th Gen. max.min-1
Speed DQ 5th Gen. max.min-1
4
DQB2 DN 1’’-11/2’’ (25-40 mm)
for two way flow of a medium designed for rotating inner pipe
DQL
DN
TypeOrder-No.TypeOrder-No.TypeOrder-No.
1
DQLB 225 K-7001110097-700
DQB 225 K-7001110081-700
DQTB 225 K-7001110091-700
1 1/4
DQLB 232 K-7001110172-700
DQB 232 K-7001110156-700
DQTB 232 K-7001110166-700
1 1/2
DQLB 240 K-7001110247-700
DQB 240 K-7001110231-700
DQTB 240 K-7001110241-700
Ø AB2CEa F2Ø JØ K G7/h8M±3NOP±3Q (4x90°)QaQeRSTØ W G7/e8XZGBWeight (lbs)
0.9843/43/4
2.79511.0245.9061.7724.7243.0310.7875.512G 1/23.9377.2054.0160.9450.3940.7091.181
12.7950.787
55
1.26011
2.99211.2205.9061.9694.7243.2280.9845.512G 1/24.1347.4024.0160.9450.3940.9451.181
12.9920.787
55
1.4961 1/41 1/43.465
12.7956.6932.5595.5123.7800.9846.102G 1/24.7648.9764.7240.9840.3941.1421.575
15.0790.787
77
ANSI150 lbs
5
DQB2 DN 2’’- 6’’ (50-150 mm)
for two way flow of a medium designed for rotating inner pipe
DQL
DN
TypeOrder-No.TypeOrder-No.TypeOrder-No.
2
DQLB 250 K-7001110322-700
DQB 250 K-7001110306-700
DQTB 250 K-7001110316-700
2 1/2
DQLB 265 K-7001110397-700
DQB 265 K-7001110381-700
DQTB 265 K-7001110391-700
3 1/2
DQLB 280 K-7001110472-700
DQB 280 K-7001110456-700
DQTB 280 K-7001110466-700
4
DQLB 2100 K-7001110547-700
DQLB 2100 K-7001110531-700
DQLB 2100 K-7001110541-700
5
DQLB 2125 K-7001110622-700
DQLB 2125 K-7001110606-700
DQLB 2125 K-7001110616-700
6
DQLB 2150 K-7001110697-700
DQLB 2150 K-7001110681-700
DQLB 2150 K-7001110691-700
Ø AB2CEa F2Ø JØ K G7/h8M±3NOP±3Q (4x90°)QaQeRSTØ W G7/e8XZGBWeight (lbs)
1.9691 1/21 1/23.976
15.7487.3233.3465.7093.2681.1816.693G 1/2
10.9064.9024.5280.9060.3941.4571.969
18.1100.866110
2.59822
4.56716.7328.0314.1346.6934.9211.3787.087G 1/2
12.1466.0635.1180.9840.3941.7721.969
19.6850.866150
3.1892 1/22 1/24.705
17.9139.2134.4887.0875.1771.5758.071G 1/2
12.7956.4766.1021.4370.5912.3621.575
21.0631.024209
3.89833
5.29519.76410.4335.3157.6775.7681.7728.858G 1/2
14.2527.0676.9692.1650.5912.9531.969
23.1101.181287
4.68544
5.45322.04712.2056.6939.0555.8661.969
11.024G 1/2
15.7877.4618.0711.9690.5913.4653.150
26.6141.181459
5.74855
5.98423.62213.8588.031
10.2366.2991.969
12.402G 1/2
16.1427.8749.1342.1650.7874.1343.543
28.3461.181626
ANSI150 lbs
6
KE + KEW Cooling Unit
Rotary Joints of series DQ are a part of an US and internationallypatented system that prevents the common failure consequence ofcarbonization and cracking caused by hot thermal oil contact withatmospheric oxygen. This chemical reaction would cause seal dama-ge which would result in improper hot oil and oil vapor leakage.To prevent this consequence, series DQ are especially designed tobe used in conjunction with a barrier fluid as cooling medium (useof the same heat transfer fluid as in the main circuit is recommen-ded). This combined utilization is a unique function that maximizesfailure avoidance throughout manufacturing processes.
The barrier fluid is conditioned (filtered and cooled) by the KE / KEW external cooling unit component. Type KE is equippedwith an air cooled heat exchanger. Type KEW has a water cooledheat exchanger. The cooling unit also serves as a constant monito-ring unit of the rotary joints’ functions. As a result, the cooling unit has the triple bonus features of monitoring the rotary jointswhile it simultaneously cools and filters the barrier fluid. The coo-ling unit also includes special monitoring elements which transmitsignals to a customer provided control unit (PLC). In case of anyleakage at the rotary joint it is possible to continue operation untilthe next scheduled shut-down, since the leaking oil is collected bythe cooling unit.
One cooling unit can simultaneously service multiple rotary joints. So that each rotary joint is equally sup-plied by the cooling unit, a flow distributor is recommended.
Hot thermal oil flows through the rotary joint and is sealed by the mechanical seal (primary seal P). If thehot thermal oil comes in contact with atmospheric oxygen in the sealing gap (P), chemicalreaction (carbonization) would be the result, leading to damages at seal (P) andbearing (L). Thus, a barrier fluid (second oil circuit) flows through thebearing and sealing area of the rotary joint in order to cool andlubricate these components. In addition, the primary seal (P) isisolated from atmospheric oxygen. The barrier fluid is seal-ed against atmosphere by a second seal (secondary seal S) and processed by cooling unit KE / KEW. These unique isolationmeasures (I) support the desiredeffect of the barrier fluid.
This solution improves thewear resistance and opera-tional reliability of therotary joints significantlycompared to conven-tional rotary joints.
Cooling Unit KE / KEW
Operating Principle
7
Integrated monitoring devices/alarms for temperature, flow rate,level min/max and filter condition will transmit an electric signalto the customer’s PLC, if an alarm situation is present. For properinstallation all necessary wiring, schematic and circuit diagramswill be supplied upon order.
Cooling Circuit for two or more Rotary Joints
Features of the Cooling Unit
For two or more rotary joints the cooling oil circuitis to be installed as shown in the diagram. A coo-ling oil distributor (KV) is recommended to com-pensate for differences in installation height, pipelength and cross sectional areas. The oil distributorensures an even oil supply (V1) to the rotary jointsand transmits an electric signal to the control unit,if the correct flow is not maintained.
Maximum pipe length is 82 ft (25 m). Please notethe minimum cross section of the pipes accordingto the diagram.
The maximum admissible head loss (pump pressureP0) in the system is 72.5 psi (5 bar). For furtherinformation please refer to the OperatingInstructions at www.maier-heidenheim.de orwww.maieramerica.com. Please call us for user ID and password.
2.1 (8)KE 28-53
1192059-053KEW 28-41
1192059-0419.2 (35)
0.37 kw, 380-420V2.1 (8)
8 (KE) / 10 (KEW)0.44 kw , 440-480V
2.53 (9.6)8 (KE) / 10 (KEW)
4.2 (16)KE 28-52
1192059-052KEW 28-51
1192059-0519.2 (35)
0.75 kw, 380-420V4.2 (16)
12,5 (KE) / 16,5 (KEW)0.9 kw , 440-480V
5.07 (19.2)12,5 (KE) / 16,5 (KEW)
7.4 (28)––
KEW 28-401192059-040
9.2 (35)0.75 kw, 380-420V
7.4 (28)20 (KEW)
0.9 kw , 440-480V8.88 (33.6)20 (KEW)
Size of pump gpm (l/min)TypeOrder no.TypeOrder no.Nom.tank vol. gal (l)Motor power 50 HzCircul.pump gpm (l/min)Cooling capacity* kwMotor power 60 HzCircl.pump gpm (l/min)Cooling capacity* kw
Control voltage 24V or 220V. Design according 2006/42/CE. Standard color RAL 7032 pebble grey structured. * Air or water temperature < 86°F (30°C) at inlet.
min 1/2’’
min 1/2’’
min 3/4’’
a, b, c
a, b, c
a, b, c
See parts list page 8
8
Features of the Cooling Unit
Please specify exact type designation of the cooling unit plus order no. when placing an inquiry or an order.
Spare Parts
0.75 / 0.9 kW, insulation cl. F, IP 54380-420 V/2.1-1.9 A/50 Hz/1400 rpm440-485 V/2.0-1.8 A/60 Hz/1680 rpm
0.18 kW insulation class F, IP 44380-420 V/ 0.31 A50 Hz/2600 rpm
IP 65, AC/DCmax. 250 V, max. 2 A, 60 W
IP 65, AC/DC, max 250 V12 V: max. 10 A24 V: max. 5 A
IP 65, AC/DC
max. 250 V, 55 W
IP 65, AC/DC, max. 250 V12 V: max. 10 A24 V: max. 5 A
non-electrical controller
IP 65, AC/DC, max. 250 V220 V: max. 5 A, 24 V: max. 8 A
3-phase motor for pumps
3-phase motor for air cooleronly with KE 28
Flow guardflow rate reached = 1
Temperature guardOil temperature too high = 0
Level indicator maxMax. oil level reached = 0
Level indicator minMin. oil level reached = 0
Controller for oil/air cooleronly with KE 28
Control valve for oil/waterheat exchangeronly with KEW 28
Filter wear indicatorFilter change = 0
M1
M2
FS1
TS1
LS1A
LS1B
TS2
PS1
FA-
TA+
LA+
LA-
TS
FC
PDA+
M1Pos. 2a, b, c
M2 Pos. 4 (only KE)
TS2Pos. 9 (only KE)
FS1Pos. 11a, b, c
TS1Pos. 14
LS1APos. 10
LS1B PS1Pos. 8
Type1a Pump 2.1 gpm1b Pump 4.2 gpm1c Pump 7.4 gpm2a El.motor for 1a2b El.motor for 1b2c El.motor for 1c3 Coupling4 Air heat exchanger5 Hose 16 Hose 2
KE3516157-0013516157-0013516157-0023631011-0033631017-0013631017-0013514092-0023516156-0013513001-0013513001-002
KEW3516157-0013516157-0013516157-0023631011-0033631017-0013631017-0013514092-0023516153-0013513001-0013513001-004
Type7 Hose 38 Filter cartridge9 Temperature control
10 Level indicator11a Flow guard for 1a (1.6 gpm)11b Flow guard for 1b (3.1 gpm)11c Flow guard for 1c (5.8 gpm)12 Cooling water contr. valve13 Ball valve14 Temperature control
KE3513001-003
35161663636032-0043636031-0013636026-0013636030-0013636030-002
---3516171-0013636032-005
KEW3513001-006
3516166---
3636031-0013636026-0013636030-0013636030-0023516002-0033516171-0013636032-005
9
Initial Data
Nominal diameter of rotary joint DN inch
Thermal oil temperature T1 °F
Thermal oil pressure p1 psi
Speed n rpm
Number of rotary joints per unit z pieces
Calculation
Mechanical friction load per rotary jointPm = 0.105 *n* Mr/1000(Mr from fig. 1) = kW
Thermal capacity per rotary joint(Pt from fig. 2) = kW
Cooling capacity per rotary joint Pv = Pm + Pt = kW
Required cooling capacity Pke* � Z * Pv = kW
Required oil flow per unit:Q � 1.35 * Z * Pv = l/min/ 3.78 = gal
System Design Calculations
fig. 1 0 29 58 81 116 145 (psi)
DQ 6’’
DQ 5’’
DQ 4’’
DQ 31/2’’DQ 21/2’’
DQ 2’’
DQ 11/2’’
DQ 1+11/4’’
DQ 6’’
DQ 5’’
DQ 4’’
DQ 31/2’’
DQ 21/2’’
DQ 2’’
DQ 11/2’’
DQ 11/4’’
DQ 1’’
fig. 2
Capacity and size of all oil distributors must be adjusted to the pump performance. The above mentioned types are adjusted to a pump volume of 7.4 gpm.
Cooling Oil Distributor
Number of rotary joints zOil volume /rotary joint
V11-2.6 gpmOrder no.
2.6-5.3 gpmOrder no.
L inA inB in
z = 2 z = 3 z = 4 z = 5
KV 10-3 KV 10-4 KV 10-53516158-103 3516158-104 3516158-105
KV 20-23516158-202
5.98 14.96 14.96 14.960.43 2.99 2.99 2.990.43 2.99 0.59 0.59
212 302 398 482 572 662 (°F)
10
Gasket for flange connections B2 and C (to ANSI)
Journal Flange Connectionwith O-Ring
For mounting rotary jointswithout alignment for high speeds we recommend touse O-rings for sealing.Attention! Consider medi-um and temperature when selecting the O-ring!
K-flange
KF 32-500KF 40-500KF 50-500KF 65-500KF 80-500KF 100-500KF 100-41KF 125-9KF 150-19
Order-No.
1190434-5001190435-5001190436-5001190437-5001190438-5001190439-5001190439-0411190450-0091190451-019
Inner ring
IR 32-500IR 40-500IR 50-500IR 65-500IR 80-500
IR 100-500IR 100-10IR 125-6
IR 150-10
Order-No.
1190404-5001190405-5001190406-5001190407-5001190408-5001190409-5001190409-0101190410-0061190411-010
GasketOrder-No.351223435122353512236351223735122383512239119004511900261190047
DN
111/411/2
221/231/2
456
Gasket for ConnectionB2, C
3512265-7003512266-7003512267-7003512268-7003512269-7003512270-7003512271-7003512272-7003512273-700
DN
111/411/2
221/231/2
456
Ø A
0.981.261.491.972.603.193.854.725.63
Ø AD
4.534.725.716.508.078.668.989.84
12.00
Ø LK
3.543.744.535.316.697.286.688.46
10.23
AZ xØ DB
4 x 0.434 x 0.434 x 0.554 x 0.554 x 0.716 x 0.718 x 0.718 x 0.718 x 0.87
Ø KD
1.892.092.723.504.294.725.676.898.07
Ø IDH8/h81.691.892.483.234.014.335.246.507.87
KB
0.590.710.790.981.181.181.181.381.57
Ø KG7/h81.771.972.563.354.134.495.316.698.03
O
0.790.980.981.181.381.571.771.971.97
EB
0.630.790.871.101.341.261.261.501.77
Journal Flanges for K Rotor Connection
Material: carbon steel
Attention: DN = DN of rotary joint.
11
DNHousing DQB2 / DQLB2Housing DQTB2Bearing hous. DQ / DQTBearing housing DQLRotor bushingRotor K DQB2 / DQLB2Rotor K DQTB2Metal bellows primary sealCounter face primary sealSecundary seal compl.Counter face secondary sealCarbon sealing ring sec. sealCompression springO-Ring 1O-Ring 2CoverShaft seal DQLSupport diskElbow DQ / DQLElbow DQTDeflector sleeve DQTShaft sleeve DQLAnti-rotation forkSlide bushGrooved ball bearingGrooved ball bearing DQLSeal protector disk
3030 a
4040 a
6080
80 a100102110
110-10110-20110-40110-50110-60
120130140150
150 a160170180190200
200 a220
Please specify exact designation when placing an inquiry or an order! Maintenance in accordance with our instructions.
1––
1110184-1451110184-150
11101191110115
1110115-0723511188-0111110202-1331110201-1413511404-0771110201-139
35116813511701-0013511696-0011110210-0923511781-001
1110206––
11102091110223-1541110212-066
35104823510135-0053510135-010
1110174
1 1/4––
1110184-1451110184-150
11101941110190-1461110190-1573511188-0111110202-1331110201-1413511404-0771110201-139
35116813511701-0013511696-0011110210-0923511781-001
1110206––
11102091110223-1541110212-066
32104823510135-0053510135-010
1110174
1 1/2––
11102591110259-122
11102691110265
1110265-1163511190-0111110277-101
11102763511405-046
11102783511682
3511894-0013511708-0011110285-0863511782-0011110281-057
––
1110295-123111029811102873510532
3510206-0053510206-0101110282-058
11110208
1110208-1513501023350123935006963500886350089035133543500658
3500658-0633511871-0011110143-050
35120123502116-0013500053-0073500052-0073500085-007
35002753500084-007
3500275350030135003013500914
1 1/41110208
1110208-1513501023350069735006963500886350089035133543500658
3500658-0633511871-0011110143-050
35120123502116-0013500053-0073500052-0073500085-007
35002753500084-007
3500275350030135003013500914
1 1/21110283
1110283-082350102435012253500706
3500904-004350089035133543500658
3500658-0633511719-001
35120133212014
3502116-0013500128-0073500127-0073500123-007
35002323500123-007
3500232350030335003033500914
DNDistance ring DQ / DQTDistance ring DQLCirclip 1Circlip 2Retaining ringLocking pin 1Locking pin 2Reducer fitting DQ /DQTScrew plug 1Sensor plugO-RingGasket 1Gasket 2CU-seal 1Hexagon screw 1Hexagon screw 2Hex. screw 3 DQ / DQLStud bolt 1 DQTHex. screw 4 DQ / DQLStud bolt 2 DQTHexagon nut 1 DQTHexagon nut 2 DQTCon. grease nipple DQL
230230 a240260280290300320330332350360370380400410420420 a430430 a450460480
Spare parts for series DQ DN 1’’-11/2’’ (25-40 mm)
12
DNHousing B2Bearing housing DQ / DQTBearing housing DQLRotor bushingRotor K DQB2 / DQLB2Rotor K DQTB2Metal bellows primary sealCounter face primary sealSecondary seal compl.Counter face secondary sealCarbon sealing ring sec. sealCompression springO-Ring 1O-Ring 2CoverShaft seal DQLSupport diskElbowDeflector sleeve DQTShaft sleeve DQLAnti-rotation forkSlide bushTapered roller bearing 1Tapered roller bearing 2Distance ring DQ,DQTDistance ring DQLSpacerSpacer DQLSeal protector diskNILOS ring DQLGrooved nut DQ / DQTGrooved nut DQLCirclip 1 DQLCirclip 2Compr.spring f. bearingsRetaining ringLocking pin 1Locking pin 2Locking pin 3Screw plug G1/8Screw plug G1/2Sensor plugO-ring DQLO-ring DQ / DQTGasket 1Gasket 2CU-seal Circlip DQTHexagon screw 1Hexagon screw 2
3040
40 a6080
80 a100102110
110-10110-20110-40110-50110-60
120130140150160170180190200202204
204 a206
206 a220230240
240 a250260270280290300310320330332340350360370380390400410
2–
1110334-1371110334-1511110344-0801110340-1381110340-1413511191-0111110352-119
11103513511406-043
11103533511683
3511871-0013511869-001
11103603511180-0011110356-144
–1110348-1461110373-1451110362-083
351052335101423510045
1110358-1471110358-1481110359-1361110359-1521110357-149
35090603513513
1110324-1503500930350123235115253500870
3500909-0043500909-004
350094035006643500655
3500655-1583511701-0013511755-0011110444-062
35122813502115-001
35008733500137-0073500134-007
2 1/2–
1110409-1411110409-145
11104191110415-1081110415-1593511192-0111110399-102
11104263511407-0491110399-092
35116853511716-0013511715-0011110435-144
35119531110431-120
–1110423
1110448-1341110437-115
351053935100443510044
1110433-1131110433-132
11104361110436-1351110432-065
35090763513512
1110399-1333500950350123635115583500874
3500909-0043500909-004
350094035006643500655
3500655-1583511569-0013511839-001
35120181103449-2613502115-001
35009483500094-0073500092-007
3 1/2–
1110484-2101110484-2241110494-1401110490-2141110490-2323511193-0111110502-198
11105013511408-0771110503-1118 x 35115533511873-0013511874-0011110510-212
35119721110506-219
–1110522-2311110523-2221110512-220
351051335100273510027
1110508-2171110508-2251110509-2181110509-2261110507-180
35090753513508
1110474-223350103735012053511560350069335008903500922350094035006643500655
3500655-1583511871-0013511758-0011110594-0701110519-1543502115-001
35006923500134-0073500128-007
4–
1110559-1351110559-1591110569-1091110565-1361110565-1663511194-0111110549-130
11105763511409-043
11105788 x 35115503511703-0013511702-0011110585-1453511178-0011110581-150
–1110597-1491110598-1391110587-146
351051935100253510021
1110583-1441110583-1621110586-1431110586-1691110582-151
35090623513505
1110549-160350094935012513511558350105035009223500922350094035006643500655
3500655-1583511776-0043511773-0011110669-063
35120183502115-001
35009473500137-0073500128-007
5–
11106341110634-160
11106441110640-1321110640-1653511195-0111110652-113
11106513511410-043
11106538 x 35115513511725-0013511712-0011110660-1253511181-0011110656-059
–1110648
1110673-1391110662-140
351048535100723510072
1110658-1361110658-162
11106611110661-1681110657-061
35090581110624-1371110624-137
350095935012073511587350070935009223500922350094035006643500655
3500655-1583511780-0043511757-0011110668-084
35120203502115-001
35006993500137-0073500134-007
6–
11107091110709-146
11107191110715
1110715-1713511196-0111110727-126
11107263511411-0411110728-1538 x 35115513511727-0043511726-004
11107353511165
1110731-054–
1110723111072911107373510491351002435100231110733
1110733-14011107361110736
1110732-0561110738
1110699-1381110699-138
350095435012373511557350087135008963500922350094035006643500655
3500655-1583511758-0013511759-0011110743-116
35122553502115-001
35008753500173-0073500164-007
Spare parts for series DQ DN 2’’-6’’ (50-150 mm)
13
DNStud bolt or hexagon screwStud bolt 1 DQTHexagon screw 3Stud bolt 2 DQTHexagon nutHexagon nut DQTHexagon nut DQTEye screwConical grease nipple
420420 a
430430 a
450450 a
460470480
23500123-007
35002573500123-007
3500257–
3500303350030335006683500914
2 1/23500164-007
35002793500123-007
3500257–
3500285-001350030335006683500914
3 1/23500274-007
35009863500165-0073500227-0073500285-0073500285-0013500285-001
35006683500914
43500271-0073500242-0073500161-007
35002343500287-007
35003003500285-001
35006683500914
53500271-0073500242-0073500166-007
35002343500287-007
35003003500285-001
35006683500914
63500271-0073500242-0073500204-007
35002363500287-007
3500300350030035006683500914
Please specify exact type designation when placing an inquiry or an order!Maintenance in accordance with our instructions.
D 13407 us
Christian Maier GmbH & Co. KGMaschinenfabrik
Wuerzburger Straße 67-69D-89520 Heidenheim
P.O.Box 1609D-89506 Heidenheim
+ 49 (0) 73 21 / 317-0+ 49 (0) 73 21 / 317-139 (Export)0 800 / 7 51 82 50+ 49 (0) 73 21 / 317-239
�
�
Maier Italia Srl
Via Enrico Toti 3I-21040 Gerenzano (VA)
+ 39-02-96 24 82 88+ 39-02-96 36 96 95
�
Branch Offices & Service Centers:
Maier America LLC
6649 Peachtree Industrial Blvd., Suite ONorcross, GA 30092 - USA
770-409 0022770-409 0069
�