Roofing Solutions

Tested and Approved for All Tile Roof ProfilesLightweight compared to sanded Mortar and Mixes dry, wet, or set.

With Tile-Tite you will be using a superior, stronger, lighter product versus sanded mortar mixes. A 40 lb bag fills a 5 gallon bucket and will still be light enough to bring up to the roof, and a 10” trowel heaped with Tile-Tite only weighs half that of a trowel with sanded mortar.

A 40 lb bag of Tile-Tite once properly mixed with approximately 3 – 3.5 gallons of water, expands to at least the equivalent of

a heavy 80 lb bag of sand and cement.

Roof Tile Mortar

Strong&

Lightweight

Asphalt Tiles

Concrete Tiles Terracotta Tiles

Metal Roofs

Suitable SurfacesWhy Choose NXT Cool Coat®?

• Wide Variety of Colors• Ultra Durable• Keeps Your House Cool

During the Summer• Environmentally Friendly• Antimicrobial• 100% Waterproof• 12 Year Warranty

BEFORE AFTER

NXT Cool Coat® is a remarkable new heat reflective roof coating utilizing revolutionary Thermal Protection Technology® to reduce the temperature of your home in summer.

Enhance&

Cool

MaxiPoint™ is a viscous, ready to use roof pointing mortar that is easy to use and very durable. MaxiPoint™ is available in a range of colors to suit new and renovated roofs. No more cracked or faded mortar work

– 7 Year Warranty –

Wide Selection of Colors

Pre-mixed, Pre-colored. Ready-to-use.

Protect&

Restore

H1919-11276

www.PMMproducts.com325 Old Sanford Oviedo Road, Winter Springs, FL 32708 – 800.432.5539 • 1259 NW 21st Street, Pompano Beach, FL – 800.432.5097

Non-Acid Efflorescence & Oxide Residue Remover is a cleaning solution that breaks down and emulsifies efflorescence and oxide residue from tile roofs.

After

Coverage: Approximately 300–1500 ft2 per coat per gallon depending on surface

Before

Efflorescence & Oxide Remover

Remove&

Refresh