Rollstar · 2020. 11. 5. · 5.6.9 Rollstar-EX Hem Pocket Headbox Not Shown Floor or Wall Mount Systems 79 5.6.10 Rollstar-EX (Cable, Parts & Hem Bar Assembly) Covered Hem Pocket

FOR DESIGNERS ANDWINDOW COVERING PROFESSIONALS

[ROLL SHADES FOR REGULAR, VERTICAL WINDOWS]

Rollstar TM SPECIFICATION SHEETS ~ JUNE 2019

Castec Solar Solutions | ROLLSTAR | page iiCSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.

INDEX NO. LIFTING SYSTEM HEM STYLE VALANCE LIGHT CONTROL OPTION ASSEMBLY OPTION PAGE NO.

5.1.1 Cord & Cleat Lift Rail Fabric Valance Top Not Shown Top Down Rollstar, (4040 Fascia on bottom) 1

5.2.27 SL20 Clutch - CCO Hem Bar Not Shown Not Shown Hem Bar & Hem Pocket 2

5.2.17 L32 Clutch - CCO Hem Bar Not Shown Not Shown N/A 3


5.2.19 L32 Clutch - CCO Hem Bar Not Shown Not Shown Extension Bracket(for oversized rolls) 5

5.2.20 L40 & L40 PLUS Clutch - CCO Hem Bar Not Shown Not Shown N/A 6

5.2.21 L40 & L40 PLUSSpring Assist Hem Bar Not Shown Not Shown N/A 7

5.2.1A L40 Clutch - CCO Hem Bar Not Shown Not Shown Hem Bar & Hem Pocket 8

5.2.22 L40 PLUS Clutch - CCO Hem Bar Not Shown Not Shown N/A 9

5.2.23 L45 & L45 PLUS Clutch - CCO Hem Bar Not Shown Not Shown N/A 10

5.2.24 L45 & L45 PLUS Spring Assist Hem Bar Not Shown Not Shown N/A 11


5.2.26 L45 PLUS Clutch - CCO Hem Bar Not Shown Not Shown N/A 13

5.2.28 SL10 Clutch - CCO Hem Bar 3x3 Snap-on Fascia Not Shown SL10 Clutch with 3x3 Snap-on Fascia 14

5.2.2A L32 and L40 Clutch - CCO Hem Bar L-System Fascia (3x3) Not ShownL32 and L40 Clutch with L-System Fascia (3x3) 15

5.2.29 SL10 Clutch - CCO Not Shown 4040 Fascia Not Shown N/A 16

5.2.3A L40 Clutch - CCO Not Shown 4040 Fascia Not Shown N/A 17

5.2.30 SL10 Clutch - CCO Not Shown 4045 Headbox Not Shown N/A 18

5.2.4A L40 Clutch - CCO Not Shown 4045 Headbox Not Shown N/A 19



5.2.32 SL20 Clutch - CCO Hem Pocket 4045 Headbox One-piece Side & Sill ChannelsDarkroom Assembly, Inside Mount 22

5.2.6A L40 Clutch - CCO Hem Pocket 4045 Headbox One-piece Side & Sill ChannelsDarkroom Assembly, Inside Mount 23

5.2.33 L40 Clutch - CCO Lift Rail 4040 Fascia, Top & Bottom Not ShownTop Down Rollstar(4040 Fascia on Top & Bottom) 24

5.2.34 L40 Clutch - CCO Lift Rail Fabric Valance Top Not Shown Top Down Rollstar(4045 Headbox on Bottom) 25

5.2.35 SL10 Clutch - CCO A. Wrapped Hem Bar B. Hem Pocket Not Shown Not ShownCorner Application(Regular & Reverse Roll) 26

5.2.8A L40 Clutch - CCO A. Wrapped Hem Bar B. Hem Pocket Not Shown Not ShownCorner Application(Regular & Reverse Roll) 27

Table of Contents[ROLLSTAR SPECIFICATION SHEETS]

Photo (front cover) courtesy of Mermet USA, Inc.

Castec Solar Solutions | ROLLSTAR | page iiiCSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.


5.2.36 SL10 Clutch - CCO Hem Pocket 5050 Headbox Not Shown 2-CCO SL10 shades (Mounted in one Headbox) 28

5.2.9A L32 Clutch (shown) or L40 Clutch - CCO Hem Pocket 5050 Headbox Not Shown2-CCO shades (Mounted in one Headbox) 29

5.2.15 Duo Link - CCO Hem Bar N/A Not Shown Duo Link (with common center support bracket) 30

5.2.16 Multi Link - CCO Hem Bar N/A Not Shown Multi Link (with shared single control mechanism) 31

5.2.37 SL30 Clutch - CCO Hem Pocket Not Shown Not Shown SL30 Clutch with Spring Assist 32



5.2.12 Clutch - CCO Hem Bar Small Cassette Not Shown N/A 35

5.2.13 Clutch - CCO Hem Bar Large Cassette Not Shown N/A 36

5.2.39 SL15 or SL20 Clutch - CCO Exposed Hem Bar 4x4 Snap-on Fascia Side Channel Blackout System 37

5.2.14A L40, L40 PLUS & L45 Clutch - CCOExposed Hem Bar with Light Control Brush L-System Fascia (3x3) Side Channel Blackout System 38

5.4.5 Spring Roller Not Shown Small Cassette Not Shown N/A 39

5.4.6 Spring Roller Not Shown Large Cassette Not Shown N/A 40

5.4.7 Standard Cordless with Rail System Hem Bar N/A N/A Hem Bar & Hem Pocket 41

5.5.17 Series 400 Motor,Battery & ST30 Motor Hem Bar Not Shown Not Shown Standard 42

5.5.18 Series 500 Motor Hem Bar Not Shown Not Shown Standard 43

5.5.19 Series 400 Motor,Battery & ST30 Motor Not Shown 4040 Fascia Not Shown N/A 44

5.5.20 Series 400 Motor,Battery & ST30 Motor Not Shown 4045 Headbox Not Shown N/A 45

5.5.21 Series 500 Motor Not Shown 5050 Headbox Not Shown N/A 46

5.5.22 Series 500 Motor Hem Pocket 5050 Headbox One-piece Side ChannelDarkroom assembly, Inside Mount 47

5.5.23 Series 400 Motor,Battery & ST30 Motor Lift Rail Fabric Valance Top Not Shown Top Down Rollstar 48

5.5.24 Series 400 Motor,Battery & ST30 Motor Hem Pocket 5050 Headbox Not Shown2 Motorized Shades (Mounted in one Headbox) 49

5.5.25 Series 400 Motor,Battery & ST30 Motor Hem Bar 4045 HeadboxOne-piece Side Channel

Darkroom Assembly, Inside Mount 50

5.5.26 Series 500 Motor Exposed Hem Bar with Light Control Brush 4x4 Snap-on Fascia Side Channel Blackout System 51

5.5.27 Series 500 AC Motor Hem Pocket 4x4 Snap-on Fascia Not Shown Coupler System (With 4 x 4 Fascia Bracket) 52

5.5.28 Series 500 DC Motor Hem Pocket 4x4 Snap-on Fascia Not Shown Coupler System (With 4 x 4 Fascia Bracket) 53

5.5.29 Series 500 Motor Hem Pocket Not Shown Not Shown N/A 54

5.5.14 ST30 & Series 400 Motor Not Shown Large Cassette Not Shown N/A 55


Castec Solar Solutions | ROLLSTAR | page ivCSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.


5.5.30 Series 500 AC Motor Hem Pocket Not Shown Not Shown AC Motor Coupler System 56

5.5.31 Series 500 DC Motor Hem Pocket Not Shown Not Shown DC Motor Coupler System 57

5.5.32 2 Shades on 1 Bracket Hem Bar N/A Not Shown L-System Duo Bracket 58

5.6.1 Not Shown Not Shown Custom Pockets Not Shown N/A 59

5.6.1A Not Shown Not Shown 5555 & 7090 Headboxes Not Shown N/A 60

5.6.2 Not Shown Hem Pocket Not Shown One-piece Side ChannelOne-piece Side Channel 61

5.6.12 ClutchesSL Series - CCO Not Shown N/A N/AComparison of various Clutch sizes 62

5.6.13 BracketsSL Series Not Shown N/A N/AComparison of various Bracket sizes 63

5.6.3A ClutchesL Series - CCO Not Shown N/A N/AComparison of various Clutch sizes 64

5.6.3B Clutches L PLUS Series - CCO Not Shown N/A N/AComparison of various Clutch sizes 65

5.6.20 Brackets - Double Vertical Slim Series Not Shown N/A N/A Duo Shades 66

5.6.21 Brackets - Universal Double Series Not Shown N/A N/A Duo Shades 67

5.6.14 Motorized,Duo Shade Not Shown Not Shown Not ShownClosure & Closure Hanger 68

5.6.15 Motorized ACDuo Shade Bracket Not Shown Not Shown Not Shown Duo Shades 69

5.6.16 Motorized DCDuo Shade Bracket Not Shown Not Shown Not Shown Duo Shades 70

5.6.17 N/A N/A N/A N/A Rollstar Tube Sizes(Description & Application-p1/3) 71

5.6.17 cont. N/A N/A N/A N/A

Rollstar Tube Sizes(Description & Application-p2/3) 72

5.6.17 cont. N/A N/A N/A N/A

Rollstar Tube Sizes(Description & Application-p3/3) 73

5.6.18 N/A N/A Complete Collection N/A Rollstar Valances Collection (p1/2) 74

5.6.18 cont. N/A N/A Complete Collection N/A

Rollstar Valances Collection (p2/2) 75

5.6.19 N/A N/A Complete Collection N/A Tube/Valance Matrix - SL/Automate/Somfy Systems 76


Tube/Valance Matrix - SL/Automate/Somfy Systems 77


Tube/Valance Matrix - L-Systems 78

5.6.9 Rollstar-EX Hem Pocket Headbox Not Shown Floor or Wall Mount Systems 79

5.6.10 Rollstar-EX (Cable, Parts & Hem Bar Assembly)Covered Hem Pocket or Exposed Hem Bar N/A N/A

Floor or Wall Mount Systems 80

5.6.11 N/A N/A Rollstar-EX Systems N/A Rollstar-EX Tube Sizes(Description & Application) 81


Understanding our Specification Sheets Numbering System ...................................................................................................v

Castec Solar Solutions | ROLLSTAR | page vCSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.

SPECIFICATION SHEETS REFERENCE SYSTEM

SHADE STYLESThe first number refers to our SHADE STYLE.

3 = Sunstar Shade4 = Curvilinear Trackstar5 = Rollstar Shade 6 = Skystar (Skylight) Shade 7 = Sloped or Horizontal Trackstar

LIFTING SYSTEMSThe second number refers to our LIFTING SYSTEM.

1 = Cord and Cleat2 = Continuous Chain Operator (CCO) & Slide Winder3 = Wand Operator4 = Spring Roller5 = Motorization6 = Miscellaneous

The last number is a SEQUENTIAL NUMBER in this series.

1 through 99 = Sequential Numbers

Index No. 5.2.27

The last number is a SEQUENTIAL NUMBER in this series.27 = Sequential Number

The first number refers to our SHADE STYLE.5 = Rollstar Shade

The second number is our LIFTING SYSTEM.2 = Continuous Chain Operator (CCO)

UNDERSTANDING OUR SPECIFICATION SHEETSNUMBERING SYSTEM

Every Specification page has an Index Number on the top right hand corner below the Shade Style.The illustration below explains our numbering system, and the chart below shows our naming systems for our Specification Sheets.

The above example means the illustration is a ROLLSTAR SHADE with a CONTINUOUS CHAIN LIFTING SYSTEM.

ROLLSTAR

Castec Solar Solutions | ROLLSTAR | page 1CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.

At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Cord & Cleat with Spring TensionHEM STYLE• Lift Rail, Round Hem BarTOP TREATMENT• Fabric Valance Top, optionalLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Top-Down Rollstar 4040 Fascia (shown on bottom only)

Index No. 5.1.1

FRONT VIEW(Room side)

CLOSE-UP VIEW(Cord & Pulley)

Shade

Tube/Cloth Roll

Lifting Cord

Cord Cleat

Cord Tassel

Lift Rail, Round Hem Bar,optional

4040Fascia

Spring Roller

Bracket

Pulley (hidden)Pulley

2¹⁄₂” Pulley Rail

Valance, optional(front shown transparent

for clarity)

Brackets can be installed directly on the sill or window frame

Note: Standard Lift Rail provided unless otherwise specified.Round Hem Bar shown in illustration is an optional item.

FRONT VIEW(Open Hem)

CLOSE-UP SIDE VIEW(Open Hem is unsealed)

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• SL20 Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional

Index No. 5.2.27

2¹⁄₄”

2⁵⁄₈”

The clutch lifting system can be used with all shades up to 16 lbs.A larger clutch is available which will accomodate shades up to 24 lbs.

Round Hem Bar,optional

3¹⁄₂”

1¹⁄₂”

Chain

Holddown

Holddown

Hem Pocket

Hem Bar

Shade

Chain

SL20 Clutch

Tube

Bracket

Chain Connector

Round Hem Bar, optional


FRONT OF SHADE

(Room side - installed on wall)

SIDE VIEW

A: OPEN HEM POCKET

Bracket to Bracket(¹⁄₈” less than tight opening)

⁵⁄₈” each side

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L32 Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional

Index No. 5.2.17

Chain

Holddown

Idler

Bracket(Idler end) Bracket Cover,

optional

Bracket (CCO end)

Clutch

Bracket Cover,optional

Shade


Tube


1¹⁄₂”

Hem Pocket

Hem Bar

A: OPEN HEM POCKET

ROLLSTAR



Index No. 5.2.18Bracket to Bracket(¹⁄₈” less than tight opening)

2¹⁄₂”

1⁷⁄₈”2¹⁄₂”

1¹⁄₂”

This clutch lifting system can be used with all shades up to 8 lbs.

Larger clutches are available which will accommodate shades up to 24 lbs.

Holddown

Chain

³⁄₈”


Holddown

L32 Clutch Bracket

Chain

Shade


2¹⁄₂” 1⁷⁄₈”

SIDE VIEWS

FRONT OF SHADE(Room side - installed inside window opening)

Note: For optional bracket covers, deduct ¹⁄₄” for inside installation.

1¹⁄₂”

Hem Pocket

Hem Bar

A: OPEN HEM POCKET

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L32 Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Extension Bracket for oversized rolls• Round Hem Bar, optional

Index No. 5.2.19

2¹⁄₈” 3³⁄₄”



Holddown

Chain


Holddown

L32 Clutch Extension Bracket

Chain

Shade


3³⁄₄”2¹⁄₈”

SIDE VIEWS



3³⁄₄”2³⁄₄”

³⁄₈”


Hem Pocket

Hem Bar

A: OPEN HEM POCKET

1¹⁄₂”

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L40 & L40 PLUS Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional

Index No. 5.2.20

Chain

Holddown

Idler

Bracket (Idler end)Bracket

Cover

Bracket(CCO end)

Clutch

Bracket Cover

Shade


Tube


1¹⁄₂”

Hem Pocket

Hem Bar

A: OPEN HEM POCKET

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L40 & L40 PLUS Spring AssistHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional

Index No. 5.2.21

Chain

Holddown

Idler

Bracket(Idler end) Bracket

Cover

Spring Assist

Tube

Bracket(CCO end)

Clutch

Bracket Cover

Shade

L40 and L40 PLUS Spring AssistRaise and lower large shades effortlessly!



1¹⁄₂”

Hem Pocket

Hem Bar

A: OPEN HEM POCKET

ROLLSTAR



Index No. 5.2.1A

2”

2⁷⁄₈”

The clutch lifting system can be used with all shades up to 12 lbs.A larger clutch is available which will accomodate shades up to 24 lbs.


2³⁄₄”

1¹⁄₂”

Chain

Holddown

Holddown

Hem Pocket

Hem Bar

Shade

Chain

L40 Clutch

Bracket

Chain Connector



FRONT OF SHADE

(Room side - installed on wall)

SIDE VIEW

A: OPEN HEM POCKET


2³⁄₄” 1³⁄₄”

³⁄₈”


ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L40 PLUS Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional

Index No. 5.2.22

This clutch lifting system can be used with all shades up to16 lbs.


Holddown

Chain


SIDE VIEWS



3¹⁄₄” 1³⁄₄”

³⁄₈”

2¹⁄₂”3¹⁄₄”3¹⁄₄”

3¹⁄₄”2¹⁄₂”3¹⁄₄”

L40 PLUSClutch Bracket

Chain

Shade

Holddown



Hem Pocket

Hem Bar

A: OPEN HEM POCKET

1¹⁄₂”

ROLLSTAR


At a glance…

Index No. 5.2.23

Chain

Holddown

Idler

Bracket (Idler end)

Bracket Cover

Bracket (CCO end)

Clutch

Bracket Cover

Shade


Tube


SHADE STYLE• RollstarLIFTING SYSTEM• L45 & L45 PLUS Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional

1¹⁄₂”

Hem Pocket

Hem Bar

A: OPEN HEM POCKET

ROLLSTAR


At a glance…

Index No. 5.2.24

Chain

Holddown

Idler

Bracket (Idler end)

Bracket Cover

Spring Assist

Tube

Bracket (CCO end)

Clutch

Bracket Cover

Shade


SHADE STYLE• RollstarLIFTING SYSTEM• L45 & L45 PLUS Spring AssistHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional


L45 and L45 PLUS Spring AssistRaise and lower large shades effortlessly!

1¹⁄₂”

Hem Pocket

Hem Bar

A: OPEN HEM POCKET

ROLLSTAR


At a glance…

Index No. 5.2.25

SHADE STYLE• RollstarLIFTING SYSTEM• L45 Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional

2¹⁄₂”3¹⁄₄” 3¹⁄₄”



Holddown

Chain


L45Clutch Bracket

Chain

Shade

HolddownRound Hem Bar,optional

3¹⁄₄” 2¹⁄₂”3¹⁄₄”

SIDE VIEWS



3¹⁄₄” 1³⁄₄”

³⁄₈”


Hem Pocket

Hem Bar

A: OPEN HEM POCKET

1¹⁄₂”

ROLLSTAR


At a glance…

Index No. 5.2.26

SHADE STYLE• RollstarLIFTING SYSTEM• L45 PLUS Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional

3¹⁄₄”4”


Holddown

Chain


L45 PLUSClutch Bracket

Chain

Shade

HolddownRound Hem Bar,optional

4” 3¹⁄₄”

SIDE VIEWS



4” 2¹⁄₄”

³⁄₈”


Hem Pocket

Hem Bar

A: OPEN HEM POCKET

1¹⁄₂”

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• SL10 Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• 3x3 Snap-on FasciaLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• SL10 Clutch with 3x3 Snap-on Fascia • Round Hem Bar, optional

Index No. 5.2.28

FRONT TOP VIEW(Room side)

Idler Bracket

Clutch BracketClutchShade


3x3 Snap-on Fascia Panel(covers front and part of bottom)

Holddown

Chain

3”

3”

Hem Pocket

Hem Bar

A: OPEN HEM POCKET

1¹⁄₂”

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L32 and L40 Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• L-System Fascia (3x3)LIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• L40 Clutch with L-System Fascia (3x3) • Round Hem Bar, optional

Index No. 5.2.2A


Idler Bracket

End Cap

End Cap

Clutch Bracket

L40 Clutch

Shade

L-System Fascia Panel (3x3)(covers front and part of bottom)

Holddown

Chain

3¹⁄₄”

3³⁄₄”


Hem Pocket

Hem Bar

A: OPEN HEM POCKET

1¹⁄₂”

Shade roll hidden from front, top and

bottom views

ROLLSTAR


At a glance…

Index No. 5.2.29

SHADE STYLE• RollstarLIFTING SYSTEM• SL10 Clutch - Continuous Chain OperatorHEM STYLE• Not shownTOP TREATMENT• 4040 FasciaLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A

SL10 Clutch

End Cap(optional)

4040 Fascia design provides dust cover protection for shade

Removable Shelf (optional - hides roll)

Shade


bottom views

4040 Fascia

4040 Fascia

4”

2¹⁄₂”

4”

Bracket

BACK VIEW(window side)

Chain

ROLLSTAR


At a glance…

Index No. 5.2.3A

SHADE STYLE• RollstarLIFTING SYSTEM• L40 Clutch - Continuous Chain OperatorHEM STYLE• Not shownTOP TREATMENT• 4040 FasciaLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A

End Cap(optional)

4040 Fascia design provides dust cover protection for shade


Shade


bottom views

4040 Fascia

Rivet(s)

4040 Fascia

4”

2¹⁄₂”

4”

Bracket


Chain

Clutch

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• SL10 Clutch - Continuous Chain OperatorHEM STYLE• Not shownTOP TREATMENT•4045 HeadboxLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A

Index No. 5.2.30

Bracket

SL10 Clutch

End Cap(optional)

4045 Headbox design provides dust cover protection for shade


Shade

Shade roll hidden from front, top, back and

bottom views


4045 Headbox

4045 Headbox

4¹⁄₂”

2¹⁄₂”

4”

Chain

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L40 Clutch - Continuous Chain OperatorHEM STYLE• Not shownTOP TREATMENT• 4045 HeadboxLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A

Index No. 5.2.4A

Bracket

End Cap(optional)



Shade


bottom views


4045 Headbox

Rivet(s)

4045 Headbox

4¹⁄₂”

2¹⁄₂”

4”

Chain

Clutch

ROLLSTAR


At a glance…

Index No. 5.2.31

SHADE STYLE• RollstarLIFTING SYSTEM• SL10 Clutch - Continuous Chain OperatorHEM STYLE• Not shownTOP TREATMENT• 5050 HeadboxLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A

Bracket

Nuts & Bolts

SL10 Clutch

End Cap(optional)



Shade


bottom views


5050 Headbox

5050 Headbox

5”

2⁷⁄₈”

4³⁄₄”

Chain

ROLLSTAR


At a glance…

Index No. 5.2.5A

SHADE STYLE• RollstarLIFTING SYSTEM• L40 Clutch - Continuous Chain OperatorHEM STYLE• Not shownTOP TREATMENT• 5050 HeadboxLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A

Bracket

Rivet(s)

End Cap(optional)



Shade

Clutch


bottom views


5050 Headbox

5050 Headbox

5”

2⁷⁄₈”

4³⁄₄”

Chain

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• SL20 Clutch - Continuous Chain OperatorHEM STYLE• Hem PocketTOP TREATMENT• 4045 HeadboxLIGHT CONTROL CHANNEL• One-piece Side Channel• One-piece Sill ChannelASSEMBLY OPTION• Darkroom Assembly, Inside Mount

Index No. 5.2.32Bracket to Bracket

(¹⁄₈” less than tight opening)

Sill ChannelScrewScrew

3³⁄₄”

2¹⁄₂”

4¹⁄₂”

Chain

Chain

Shade

Screw holes (2)

Bottom HemHem BarBottom Channel

Holddown

Holddown

AA

4045 Headbox(removed for clarity)

Screw(s)

Bottom Shelf

The clutch lifting system can be used with all shades up to 16 lbs.A larger clutch is available which will accomodate shades up to 24 lbs.FRONT VIEW

(Room side)

TOP VIEW(Section A - A)

SIDE VIEW

¹⁄₂”

2¹⁄₂”

2¹⁄₂”

4”

2¹⁄₄”2⁵⁄₈”

1”

CHANNEL NOTE: To insure the best possible light blockage, specify the optional flat exposed hem bar (ideally with brush on the bottom channel of the hem bar). This will allow the side channels to have the brush in both the front and back edges of the channel.

If a standard bottom hem pocket is specified, the side channel can only accommodate the brush in either the front edge of the channel or the back edge of the channel. Because the brush can only go on one side, the light seepage will be greater.

Unless otherwise specified, the brush colors will match the channel colors. Available in white, grey and black.

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L40 Clutch - Continuous Chain OperatorHEM STYLE• Hem PocketTOP TREATMENT• 4045 HeadboxLIGHT CONTROL CHANNEL• One-piece Side Channel• One-piece Sill ChannelASSEMBLY OPTION• Darkroom Assembly, Inside Mount

Index No. 5.2.6ABracket to Bracket


Sill ChannelScrewScrew

4¹⁄₂”

4¹⁄₂”

Chain

Chain

Shade

Screw holes (2)

Bottom HemHem BarBottom Channel

Holddown

Holddown

AA

4045 Headbox(removed for clarity)

Screw(s)

Bottom Shelf

The clutch lifting system can be used with all shades up to 16 lbs.A larger clutch is available which will accomodate shades up to 24 lbs.FRONT VIEW

(Room side)

TOP VIEW(Section A - A)

SIDE VIEW

2¹⁄₂”

4”

2”2⁷⁄₈”

1”




2¹⁄₂”

¹⁄₂”

2¹⁄₂”

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L40 Clutch - Continuous Chain OperatorHEM STYLE• Lift Rail, Round Hem BarTOP TREATMENT• 4040 FasciaLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Top-Down Rollstar 4040 Fascia (shown on both top and bottom)

Index No. 5.2.33

4040 Fascia(front shown transparent

for clarity)

Shade

Tube/Cloth Roll

Chain

Lifting Cord

Holddown

4040 Fascia, optional

Bracket

Headrail

Rivet(s)

Spring Roller

Bracket


Clutch






ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L40 Clutch - Continuous Chain OperatorHEM STYLE• Lift Rail, Wrapped Round Hem BarTOP TREATMENT• Fabric Valance Top, optionalLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Top-Down Rollstar 4045 Headbox (shown on bottom only)

Index No. 5.2.34

Shade

Tube/Cloth Roll

Chain

Lifting Cord

Holddown

4045 Headbox, optional


Bracket

Valance, optional(front shown transparent

for clarity)

Spring Roller

Bracket

Headrail

Clutch

Lift Rail,Wrapped Round Hem Bar,optional





ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• SL10 Clutch - Continuous Chain OperatorHEM STYLE• A - Wrapped Round Hem Bar• B - Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTIONCorner Application• A - Regular Roll• B - Reverse Roll

Index No. 5.2.35



Chain

Round Hem Bars(optional)

A: REGULAR ROLL – Larger gap between shade cloths

Hem Pockets(standard)

B: REVERSE ROLL – Minimizes gap between shade cloths

Chain

Holddown

Holddown

A

B

Holddown

Holddown

Chain Chain

ROLLSTAR


At a glance…

Index No. 5.2.8A



ChainChain

Holddown

Holddown

A

B

Holddown

Holddown

Chain Chain

SHADE STYLE• RollstarLIFTING SYSTEM• L40 Clutch - Continuous Chain OperatorHEM STYLE• A - Wrapped Round Hem Bar• B - Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTIONCorner Application• A - Regular Roll• B - Reverse Roll

Round Hem Bars(optional)

A: REGULAR ROLL – Larger gap between shade cloths

Hem Pockets(standard)

B: REVERSE ROLL – Minimizes gap between shade cloths

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• SL10 Clutch - Continuous Chain OperatorHEM STYLE• Hem PocketTOP TREATMENT• 5050 HeadboxLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Two CCO SL10 Shades mounted in one Headbox

Index No. 5.2.36

IdlerClutch

5”

4³⁄₄”Bracket

Rivet(s)

End Cap, optional

Screw(s)

Screw(s)

Privacy Shade (Regular Roll)

5050 Headbox

Rivet(s)

Holddown

Holddown

Chain

Chain

Solar Screen Shade (Reverse Roll)Hem Pocket


ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L32 Clutch (shown) or L40 Clutch - Continuous Chain OperatorHEM STYLE• Hem PocketTOP TREATMENT• 5050 HeadboxLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Two CCO Shades mounted in one Headbox

Index No. 5.2.9A

5”

4³⁄₄”Bracket

Idler End

Rivet(s)

End Cap, optional

Screw(s)

Screw(s)


5050 Headbox

Rivet(s)

Holddown

Holddown

Chain

Chain

Solar Screen Shade (Reverse Roll)Hem Pocket

Clutch


NOTE:

1) Closure shelf not available with this application.

2) Shade height is limited due to roll size.

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Duo Link - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• OptionalLIGHT CONTROL CHANNEL• Not ShownASSEMBLY OPTION• Duo Link operation with common center support bracket• Round Hem Bar, optional

Index No. 5.2.15

DUO LINK OPERATION(Systems 40 & 40 PLUS/and Systems 45 & 45 PLUS allows two shades to have fully independent operation

whilst sharing a common center support bracket.)

Common center support bracket(Light gap between shades is ³⁄₈”)

Window

Door

Hem Pocket

Hem Bar

A: OPEN HEM POCKET

1¹⁄₂”

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Multi Link - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• OptionalLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Multi Link operation with shared single control mechanism• Round Hem Bar, optional

Index No. 5.2.16

.

MULTI LINK OPERATION(System 40 & 40 PLUS/and Systems 45 & 45 PLUS allows multiple shades to be joined together with a

shared single control mechanism.)

Window(s)

Common center support brackets(Light gap between shades is ³⁄₈”)

Hem Pocket

Hem Bar

A: OPEN HEM POCKET

1¹⁄₂”

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• SL30 Clutch - Continuous Chain OperatorHEM STYLE• Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• SL30 Clutch with Spring Assist Mechanism

Index No. 5.2.37

Bracket Cover

Bracket

Bracket

Bracket Cover

Internal Drive Wheel

Spring Assist Mechanism (above) located inside Shade Tube (below)

Crown Wheel

Spring Assist Mechansim

Shade Tube

Collapsible Idler

Shade


Holddown

Clutch

Chain

Hem Bar

SPRING ASSIST MECHANISM WITH A SL30 CLUTCH Ideal for very heavy shades

(drawing not to scale)

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• SL30 Clutch - Continuous Chain OperatorHEM STYLE• Not shownTOP TREATMENT• 5050 HeadboxLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A

Index No. 5.2.38

Chain

Holddown

Screw

Holddown

Chain

³⁄₈”

2¹⁄₄”

4³⁄₄”

2⁵⁄₈”

5”

Optional End Cap

Optional - Closure Hanger(drawing not to scale)

(sold separately)

END VIEW(Shown without end cover)

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L40 Clutch - Continuous Chain OperatorHEM STYLE• Not shownTOP TREATMENT• 5050 HeadboxLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A

Index No. 5.2.11A

Holddown Screw

Holddown

Chain

³⁄₄”

2”

4³⁄₄”

2⁵⁄₈”

5”

Chain

Optional - Closure Hanger(drawing not to scale)

(sold separately)

END VIEW(Shown without end cover)

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Small CassetteLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional

Index No. 5.2.12

Clutch

Bracket location

Small Cassette Fascia

Note: Fascia can be fabric-wrapped for added decorative touch.

Shade

Holddown

Dust Cover

MountingBracket(s)

Brackets (brackets are affixed to end caps)

ChainRound Hem Bar, optional


Note: Cassettes are fully assembled at factory with shade, brackets and end caps attached to fascia and dust cover. Complete unit is easily snapped into the mounting brackets during installation.

End Cap

1¹⁄₂”

Hem Pocket

Hem Bar

A: OPEN HEM POCKET

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Large CassetteLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional

Index No. 5.2.13

Clutch

Bracket location

End Cap

Large Cassette Fascia


Shade

Holddown

Dust Cover

Brackets (brackets are affixed to end caps)

ChainRound Hem Bar, optional



MountingBracket(s)

1¹⁄₂”

Hem Pocket

Hem Bar

A: OPEN HEM POCKET

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• SL15 or SL20 Clutch - Continuous Chain OperatorHEM STYLE• Exposed Hem BarTOP TREATMENT• 4x4 Snap-on FasciaLIGHT CONTROL CHANNEL• Side ChannelASSEMBLY OPTION--------------------------

Index No. 5.2.39

Fascia Bracket

End Cap

Side Channel

Side Channel

Hem Bar Cap

Clutch

Exposed Hem Bar

Shade

Fascia panel

Clutch Bracket

End Cap

Idler

Tube

Holddown

CLOSE-UP VIEW(Exposed Hem Bar and End Cap)




ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L40, L40 PLUS & L45 Clutch - Continuous Chain OperatorHEM STYLE• Exposed Hem Bar with Light Control BrushTOP TREATMENT• L-System Fascia (3x3)LIGHT CONTROL CHANNEL• Side ChannelASSEMBLY OPTION--------------------------

Index No. 5.2.14A

Fascia Bracket

End Cap

Side Channel

Side ChannelHem Bar Cap

Clutch

Shade

L-System Fascia Panel (3x3)

Clutch Bracket

End Cap

Idler

Tube

Holddown

CLOSE-UP VIEW(Exposed Hem Bar with LIght Control Brush and End Cap)




Exposed Hem Bar with Light Control Brush

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Spring RollerHEM STYLE• Not shownTOP TREATMENT• Small CassetteLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A

Index No. 5.4.5

Spring Roller

End Cap

Fascia



Shade

Dust Cover


Bracket location(bracket affixed to end cap)

3¹⁄₈”

2¹⁄₂”

⁷⁄₈”

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Spring RollerHEM STYLE• Not shownTOP TREATMENT• Large CassetteLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A

Index No. 5.4.6

Spring Roller

End Cap

Fascia



Shade

Dust Cover



3¹⁄₈”

1¹⁄₄”

3³⁄₈”

.

ROLLSTAR


At a glance…

Index No. 5.4.7

SHADE STYLE• RollstarLIFTING SYSTEM• Standard Cordless with Rail SystemHEM STYLE• A. Open Hem PocketTOP TREATMENT• N/ALIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• Round Hem Bar, optional

1¹⁄₂”

Hem Pocket

Hem Bar

A: OPEN HEM POCKET

Shade, regular roll

Shade, regular roll

Shade, reverse roll

Shade, reverse roll


L-bracket(for wall mountinstallations)

L-bracket(side view)


Clip bracket(s)

Shade bracket

Shade bracket

CEILING MOUNT STANDARD CORDLESS

WITH RAIL SYSTEM SHADE(showing regular roll and

reverse roll options)

WALL MOUNT STANDARD CORDLESS WITH

RAIL SYSTEM SHADE(showing regular roll and reverse roll options)

3”

1⁷⁄₁₆”

1⁷⁄₈”

2¹⁄₄”

1³⁄₄”

1³⁄₄”

3”

ROLLSTAR

Castec Solar Solutions | ROLLSTAR | page 42

At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 400 Motor• Battery & ST30 MotorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional

Index No. 5.5.17

2¹⁄₂”

The motor lifting system can be used with all shades up to 35lbs.



Detail of Endcap

⁷⁄₈” each side ⁵⁄₈” each side

ShadeShade

SL Bracket

Motor

Motor Cord

Motor Cord



2”2⁷⁄₈”

1¹⁄₂”Hem Pocket

Hem Bar

A: OPEN HEM POCKET

CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 500 MotorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional

Index No. 5.5.18


3¹⁄₈”1³⁄₈”

4”




Endcap

Detail of Endcap

Shade

Shade

Bracket

Idler

Motor

Motor tube


1¹⁄₂”Hem Pocket

Hem Bar

A: OPEN HEM POCKET

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 400 Motor• Battery & ST30 MotorHEM STYLE• Not shownTOP TREATMENT• 4040 FasciaLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A

Index No. 5.5.19

Motor Adapter Plate

End Cap(optional)

Shade


bottom views

Motor Head

4040 Headbox

Rivet(s)Bracket

4040 Headbox

Removable shelf hides roll(optional)

Fascia design provides dust coverprotection for shade.

4”

4”

2¹⁄₂”

BACK VIEW(Window side)

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 400 Motor• Battery & ST30 MotorHEM STYLE• Not shownTOP TREATMENT• 4045 HeadboxLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A

Index No. 5.5.20

Motor Adapter Plate

End Cap(optional)

Shade

Groove for bracket

4045 Headbox

Bracket

BACK VIEW(Window side, for REGULAR ROLL)


4045 Headbox

Headbox design provides dust cover protection for shade.Note: The 4045 shelf can be turned to accomodate a REVERSE ROLL.

Removable shelf hides roll

4¹⁄₂”

4¹⁄₂”

¹³⁄₁₆”

4”

2¹⁄₂”

Motor Head

Rivet(s)

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 500 MotorHEM STYLE• Not shownTOP TREATMENT• 5050 HeadboxLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A

Index No. 5.5.21

Motor

Retaining Clip

Motor Cord

End Cap(optional)

Shade


bottom views

5050 Headbox

Bracket (removed for clarity)


BACK VIEW(Window side)

5050 Headbox

Headbox design provides dust cover protection for shade.

Removable shelf hides roll

5”

4³⁄₄”

2⁷⁄₈”

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 500 MotorHEM STYLE• Hem PocketTOP TREATMENT• 5050 HeadboxLIGHT CONTROL CHANNEL• One-piece side channelASSEMBLY OPTION• Darkroom assembly, Inside mount



2¹⁄₂” 1”

5”

Sill Channel

Optional End Cap( Removed for Clarity)

Bottom Hem

Bottom ChannelHem Bar

Shade

Bracket

5050 HeadboxRemoved for Clarity

One PieceSide Channel

One PieceSide Channel

Bracket

5050 Headbox

Motor Tube

Bottom Shelf

IdlerMotor

FRONT VIEW(room side)

TOP VIEW

SIDE VIEW




2¹⁄₂”

¹⁄₂”

2¹⁄₂”

1³⁄₈”

4¹⁄₂”

3¹⁄₈”

5”

.

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 400 Motor• Battery & ST30 MotorHEM STYLE• Lift Rail, Round Hem BarTOP TREATMENT• Fabric Valance Top, OptionalLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Top-Down Rollstar

Index No. 5.5.23

Valance, optional (front shown transparent

for clarity)

Shade

Tube/Cloth Roll

Motor Cord

Motor Head

Lifting Cord


Motor Adapter Plate

Bracket


Headrail

Spring Roller

Sill Rail, optional

Bracket





ROLLSTAR

Castec Solar Solutions | ROLLSTAR | page 49

At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 400 Motor• Battery & ST30 MotorHEM STYLE• Hem PocketTOP TREATMENT• 5050 HeadboxLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Two Motorized Shades mounted in one Headbox

Index No. 5.5.24

Motor

5”

4³⁄₄”BracketIdler End

Rivet(s)

End Cap, optional

Screw(s)

Screw(s)


5050 Headbox

Motor Cord

Solar Screen Shade (Reverse Roll)

Hem Pocket


NOTE:

1) Closure shelf not available with this application.

2) Shade height is limited due to roll size.

CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.

ROLLSTAR


At a glance…



2¹⁄₂”

¹⁄₂”

4¹⁄₂”

2¹⁄₄”

4”

Sill Channel

Optional End Cap(removed for clarity)

Bottom ChannelHem BarBottom Hem

Shade

Bracket

Bracket4045 Headbox

Motor Tube

Bottom Shelf

Idler

Motor

Motor Cord

SIDE VIEW

FRONT VIEW(Window side)

4045 HeadboxRemoved for Clarity

TOP VIEW

1”

SHADE STYLE• RollstarLIFTING SYSTEM• Series 400 Motor• Battery & ST30 MotorHEM STYLE• Hem BarTOP TREATMENT• 4045 HeadboxLIGHT CONTROL CHANNEL• One-piece side channelASSEMBLY OPTION• Darkroom assembly, inside mount




2¹⁄₂”

¹⁄₂”

2¹⁄₂”

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 500 MotorHEM STYLE• Exposed Hem Bar with Light Control BrushTOP TREATMENT• 4x4 Snap-on FasciaLIGHT CONTROL CHANNEL• Side ChannelASSEMBLY OPTION• Blackout system

Index No. 5.5.26

Fascia Bracket

End Cap

Side Channel

Side Channel

Exposed Hem Bar with Light Control Brush

Hem Bar Cap

Motor

Shade

4x4 Snap-On Fascia

Motor Bracket

Motor Cord

End Cap

CollapsibleIdler

Tube

Drive




ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 500 AC MotorHEM STYLE• Hem PocketTOP TREATMENT• 4x4 Snap-on FasciaLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• AC Motor-Coupler System with 4x4 Fascia Bracket

Index No. 5.5.27

Fascia Motor

Bracket Motor

Motor

End Cap

Drive

Collapsible Idler

Collapsible Coupler(see details below)

4x4 Snap-on Fascia sized to cover both shades seamlessly

Intermediate 4x4 Fascia Bracket

Fascia Idler Bracket

Tube

Hem Bar

Hem Pocket

Hem Bar

CLOSE-UP VIEW(Collapsible Coupler +

Intermediate Fascia Bracket)

HemPocket

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 500 DC MotorHEM STYLE• Hem PocketTOP TREATMENT• 4x4 Snap-on FasciaLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• DC Motor-Coupler System with 4x4 Fascia Bracket

Index No. 5.5.28

Fascia Motor

Bracket Motor

Motor

End Cap

Drive

Collapsible Idler


4x4 Snap-on Fascia sized to cover both shades seamlessly

Intermediate 4x4 Fascia Bracket

Fascia Idler Bracket

Tube

Hem Bar

Hem Bar


Intermediate Fascia Bracket)

Hem Pocket

HemPocket

ROLLSTAR


At a glance…SHADE STYLE• Rollstar Open RollLIFTING SYSTEM• Series 500 MotorHEM STYLE• Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A

Index No. 5.5.29

Motor Bracket

Tube

Motor

Motor

Drive

Collapsible Idler

Idler Bracket

Hem Pocket

Hem Bar

Shade

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series ST30 & Series 400 MotorsHEM STYLE• Not shownTOP TREATMENT• Large CassetteLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A

Index No. 5.5.14

End Cap

Fascia

Battery Pack for Motor (Motor is housed inside

of roller tube)



Shade

Dust Cover



3¹⁄₂”

1¹⁄₄”

3³⁄₈”

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 500 AC MotorHEM STYLE• Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• AC Motor-Coupler System

Index No. 5.5.30

Retainer Clip

Motor

AC MotorAC Motor Bracket

Drive

Idler


Intermediate Coupler Bracket

Idler Bracket

Tube

Hem Bar

Hem Bar

Hem Pocket

Hem Pocket


Intermediate Coupler Bracket)

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 500 DC MotorHEM STYLE• Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• DC Motor-Coupler System

Index No. 5.5.31

Retainer Clip

Motor

Drive

Idler


Intermediate Coupler Bracket

Idler Bracket

Tube

Hem Bar

Hem Bar

Hem Pocket

Hem Pocket

CLOSE-UP VIEWMOTOR END


Intermediate Coupler Bracket)

DC MotorDC Motor Bracket

5¹⁄₈”

6¹⁄₂”

⁷⁄₈”

ROLLSTAR


At a glance…SHADE STYLE• Sunstar (front shade)• Rollstar (back shade)LIFTING SYSTEM• 2 shades on 1 bracketHEM STYLE• Hem BarTOP TREATMENT• N/ALIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• L-System Duo Bracket

Index No. 5.5.32

Bracket

Idler

Back Shade(Rollstar, privacy)

Antenna

Motor Cord

Front Shade, lowered(Sunstar, Solar Screen)

Front Shade, partly raised

Back Shade, lowered

FRONT VIEWS(Room side, looking down from top)

SIDE VIEW

ROLLSTAR


At a glance…SHADE STYLE• Not shownLIFTING SYSTEM• Not shownHEM STYLE• Not shownTOP TREATMENT• Custom PocketsLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A

Index No. 5.6.1

Welded End Cap (removed for clarity)

Removable Shelf, Optional




NOTE: Custom Pockets are made of unfinished sheet metal.


COMPARISON OF CUSTOM POCKET SIZES

6”

7”

8”

up to 4”

up to 5”

up to 5”

6”

7”

8”

ROLLSTAR


At a glance…SHADE STYLE• Not shownLIFTING SYSTEM• Not shownHEM STYLE• Not shownTOP TREATMENT• 5555 & 7090 HeadboxesLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A

Index No. 5.6.1A

Removable Shelf

Removable Shelf

5555 & 7090 HEADBOXES

5¹⁄₂”

9”

5¹⁄₂”

7”

3”

3”

End Cap

End Cap

Screw(s)

Screw(s)

Wall Bracket

Wall Bracket

7090 HEADBOX

5555 HEADBOX

FRONT VIEWS(Room side)

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Not shownHEM STYLE• Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• One-piece side channelASSEMBLY OPTION• One-piece side channel

Index No. 5.6.2

ONE-PIECE SIDE CHANNEL WITH SHADEFRONT VIEW

SIDE CHANNEL DETAIL

2¹⁄₂”1”

Shade

Light Concealing Brush

Shade Hem

Side Channel Side Channel




ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• SL30, SL20, SL15 & SL10 Clutch - Continuous Chain OperatorHEM STYLE• Not shownTOP TREATMENT• N/ALIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• Comparison of various clutch sizes

Index No. 5.6.12

CONTINUOUS CHAIN OPERATION (CCO)SL-CLUTCH SIZES

SL30 Clutch

4¹⁄₄”3”

3¹⁄₂” 2⁵⁄₈” 1⁷⁄₈”2¹⁄₄”

2³⁄₈”2⁵⁄₈”

SL20 Clutch SL10 ClutchSL15 Clutch

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• SL30, SL20, SL15 & SL10 Clutch - Continuous Chain OperatorHEM STYLE• Not shownTOP TREATMENT• N/ALIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• Comparison of various bracket sizes

Index No.5.6.13

BRACKETSSL-BRACKET SIZES

SL10, 15 & 20 Brackets SL30 BracketSL10 Bracket

2⁵⁄₈”

1⁵⁄₈”2³⁄₁₆”

2⁷⁄₈”2⁷⁄₈”

3⁵⁄₈”

⁵⁄₈”

⁵⁄₈”

⁵⁄₈”

ROLLSTAR


At a glance…SHADE STYLE• Rollstar or SunstarLIFTING SYSTEM• L32, L40, & L45 Clutches - Continuous Chain OperatorHEM STYLE• Not shownTOP TREATMENT• N/ALIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• Comparison of various clutch sizes

Index No. 5.6.3A

CONTINUOUS CHAIN OPERATION (CCO)L-CLUTCH SIZES

2⁷⁄₈” 2¹⁄₈” 1⁵⁄₈”

2⁷⁄₈” 2¹⁄₈” 1⁵⁄₈”

L40 Clutch L32 ClutchL45 Clutch

ROLLSTAR


At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L32 PLUS, L40 PLUS, & L45 PLUS Clutches - Continuous Chain OperatorHEM STYLE• Not shownTOP TREATMENT• N/ALIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• Comparison of various clutch sizes

Index No. 5.6.3B

CONTINUOUS CHAIN OPERATION (CCO)L PLUS-CLUTCH SIZES

3¹⁄₂” 2⁷⁄₈” 1⁵⁄₈”

3¹⁄₂” 2⁷⁄₈” 1⁵⁄₈”

L40 PLUS Clutch L32 PLUS ClutchL45 PLUS Clutch

ROLLSTAR


At a glance…

Index No. 5.6.20

SHADE STYLE• RollstarLIFTING SYSTEM• SL Clutches and Automate MotorsHEM STYLE• N/ATOP TREATMENT• N/ALIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• Duo Shades

DOUBLE VERTICAL SLIM BRACKET& BRACKET COVER

SIDE VIEW

INSIDE FRONT VIEW

ANGLED VIEW

Double Vertical Slim Bracket

Bracket Cover

3”

⁷⁄₈”

4¹⁄₈”

5”

5”

6¹⁄₈”

ROLLSTAR


At a glance…

Index No. 5.6.21

SHADE STYLE• RollstarLIFTING SYSTEM• SL Clutches and Automate MotorsHEM STYLE• N/ATOP TREATMENT• N/ALIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• Duo Shades

UNIVERSAL DOUBLE BRACKET& BRACKET COVER

SIDE VIEW

INSIDE FRONT VIEW

ANGLED VIEW

Universal Double Bracket

Bracket Cover

4³⁄₄”

⁷⁄₈”

5³⁄₈”

4³⁄₄”

4³⁄₄”

5³⁄₄”

ROLLSTAR


At a glance…SHADE STYLE• Rollstar, Duo ShadeLIFTING SYSTEM• MotorizedHEM STYLE• Not shownTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• With Closure and Closure Hanger

Index No. 5.6.14

3⁷⁄₈”

2 ”

4⁵⁄₈”

5”

3¹⁄₈” 3¹⁄₈”

Shade Bracket

Custom Headbox

Leveling Screw

Leveling Screw Closure Hanger

Closure Shelf

Shade Bracket

CUSTOM HEADBOXApplication A: Shades Stacked

Application B: Shades Side by SideCUSTOM POCKET

SIDE VIEWS

Note: Custom box dimensions are driven by shade size

CLOSURE SHELF/HANGEROptional Stand-Alone closure shelf and closure hanger.

(sold separately for wood valances).Extruded closure shelf will be cut down based on specs.

SHOWN ABOVE: 5” CLOSURE SET.(2¹⁄₂” CLOSURE SET AVAILABLE)

ROLLSTAR


At a glance…

SHADE STYLE• Rollstar, Duo ShadeLIFTING SYSTEM• Motorized (AC Motors only)HEM STYLE• Not shownTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Duo Shades

Index No. 5.6.15DOUBLE BRACKETS FOR AC MOTOR(open roll shades)

SIDE VIEW OF BRACKETS

Idler End Motor End

4⁵⁄₈”

7¹⁄₂”7¹⁄₂”

4⁵⁄₈”

1³⁄₄”1³⁄₄”

ROLLSTAR


At a glance…

Index No. 5.6.16

SHADE STYLE• Rollstar, Duo ShadeLIFTING SYSTEM• Motorized (DC Motors only)HEM STYLE• Not shownTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Duo Shades

SIDE VIEW OF BRACKETS

Idler End Motor End

7¹⁄₂”7¹⁄₂”

1³⁄₄”1³⁄₄”

4⁵⁄₈” 4⁵⁄₈”

DOUBLE BRACKETS FOR DC MOTOR(open roll shades)

ROLLSTAR


At a glance…

Index No. 5.6.17

SHADE STYLE• Rollstar TubesLIFTING SYSTEM• SL-Systems - Continuous Chain Operators and Automate MotorsHEM STYLE• N/ATOP TREATMENT• N/ALIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• N/A

TUBE SIZE/DESCRIPTION

APPLICATIONROLLEASE

Continuous Cord OperatorsROLLEASE

Automate Motors

SL10CCO

SL15CCO

SL20CCO

SL30CCO G200 G400

Spring Assist

Li-ion1.1

Li-ion2.0

Li-ion3.0

Li-ion10.0

1¹⁄₄” with Key Drives •

1¹⁄₂” with Key Drives • • • • •

2” with Key Drives • • • • • •

2¹⁄₂” with Key Drives • • • • • •

3¹⁄₄” with Key Drives • • • •

ROLLSTAR


At a glance…

Index No. 5.6.17 cont.

SHADE STYLE• Rollstar TubesLIFTING SYSTEM• Somfy MotorsHEM STYLE• N/ATOP TREATMENT• N/ALIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• N/A


APPLICATION

SOMFY MOTORS

R28 Battery

Sonesse 30 Wire

Free Li-ion RTS

Battery

DC50 (Ultra Quiet) Series

Sonesse 30 (ST30)

(Quiet) Low

Voltage

Sonesse 30 (ST30)

(Ultra Quiet) Low

Voltage

Sonesse (Quiet)

400 Series

Sonesse (Quiet)

500 Series

Sonesse (Ultra Quiet)

500 Series

1¹⁄₂” with Key Drives • • • •

1¹⁄₂” Groove Tube •

2” Groove Tube •

2” with Key Drives • • • •

2¹⁄₄” with Key Drives • •

2³⁄₈” with Key Drives •

2¹⁄₂” with Key Drives •

3¹⁄₄” with Key Drives •

4” Smooth •

5” Smooth •

5” D-Tube(for heavy shades)

•

ROLLSTAR


At a glance…SHADE STYLE• Rollstar TubesLIFTING SYSTEM• L-Systems - Continuous Chain Operators, Cordless and Somfy MotorsHEM STYLE• N/ATOP TREATMENT• N/ALIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• N/A



APPLICATION

LOUVOLITE Continuous Cord Operator

Cord-less

SOMFYMotors

L32CCO

L32PLUSCCO

L40CCO

L40PLUSCCO

L45CCO

L45PLUSCCO

Large Spring Assist*

Cord-less Cas-sette

R28Bat-tery

MotorST30Motor

Series400

Motor

Series500

Motor

1¹⁄₄” with Key Drive • •

1¹⁄₂” with 2 Key Drives • • • • • •

1³⁄₄” with 3 Key Drives • • • •

1³⁄₄” with 3 Key Drives(thick wall)

• • •

2¹⁄₈” (thick wall) •

* Spring assist may be desirable in situations where you have multiple or large shades.

ROLLSTAR


At a glance…SHADE STYLE• Rollstar ValancesLIFTING SYSTEM• N/AHEM STYLE• N/ATOP TREATMENT• Complete Collection (page 1 of 2)LIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• N/A

Index No. 5.6.18 DESCRIPTION

Dust Cover

Included

Bottom Shelf

Included

End Cap

Included

Back Cover

Included

Reverse Roll

Available Notes

Small Cassette3¹⁄₈”H x 2¹⁄₂”D Yes N/A Yes N/A Yes

Face can be fabric

wrapped

Large Cassette3¹⁄₈”H x 3³⁄₈”D Yes N/A Yes N/A Yes

Face can be fabric

wrapped

Snap-on Fascia3”H x 3”D N/A Yes

Must be specified

Must be specified No

L-System Fascia3x3 Small (Snap-on)3³⁄₄”H x 3³⁄₈”D N/A Yes

Must be specified N/A No

Snap-on Fascia4”H x 4”D

Must be specified Yes

Must be specified

Must be specified No

L-System Fascia4x4 Large (Snap-on)4³⁄₈”H x 4¹⁄₈”D

N/A Yes Must be specified N/A No

4040 Covered Fascia4”H x 4”D Yes

Must be specified

Must be specified N/A

Yes (without Bottom Shelf)

Shadow line on

face and bracket

5” Fascia (Snap-on)5”H x 5”D N/A Yes

Must be specified N/A

Yes(if Fascia is flipped)

Can be used for

small duo shades

7” Fascia (Snap-on)7³⁄₈”H x 5¹⁄₂”W N/A Yes

Must be specified N/A No

Not available

as reverse roll

ROLLSTAR


At a glance…SHADE STYLE• Rollstar ValancesLIFTING SYSTEM• N/AHEM STYLE• N/ATOP TREATMENT• Complete Collection (page 2 of 2)LIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• N/A

Index No. 5.6.18 cont. DESCRIPTION

Dust Cover

Included

Bottom Shelf

Included

End Cap

Included

Back Cover

Included

Reverse Roll

Available Notes

4045 Headbox4¹⁄₂”H x 4”D Yes

Must be specified

Must be specified Yes Yes

Groove on back for bracket

5050 Headbox5”H x 4³⁄₄”D Yes

Must be specified


5555 Headbox5¹⁄₂”H x 5¹⁄₂”D Yes Yes


7090 Headbox9”H x 7”D Yes Yes


For very large

shades or two shades

Hanger³⁄₈”W x 2¹⁄₄”HShelf5”W x ⁷⁄₈”H

N/A Yes N/A N/A N/AFor

wood boxes

ROLLSTAR


At a glance…

Index No. 5.6.19.

SHADE STYLE• Tube/Valance MatrixLIFTING SYSTEM• N/AHEM STYLE• N/ATOP TREATMENT• For SL Clutches, Automate and Somfy Motor Systems LIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• N/A

1¹⁄₄” Tube

with Key Drives

1¹⁄₂” Tube

with Key Drives

1¹⁄₂” Groove Tube

2”Groove Tube

2” Tube

with Key Drives

2¹⁄₄” Tube

with Key Drives

2³⁄₈” Tube

with Key Drives

2¹⁄₂” Tube

with Key Drives

3¹⁄₄” Tube

with Key Drives

DESCRIPTION

Small Cassette3¹⁄₈”H x 2¹⁄₂”D •

Large Cassette3¹⁄₈”H x 3³⁄₈”D • • •

Snap-on Fascia3”H x 3”D • • •

Snap-on Fascia4”H x 4”D • • • • • • • • •

5” Fascia Panel(Snap-on) • • • • • • • • •

7” Fascia Panel(Snap-on) Not available as reverse rolls

• • • • • • • • •

4040 Covered Fascia4”H x 4”D

• • • • •

4045 Headbox4¹⁄₂”H x 4”D • • • • •

5050 Headbox5”H x 4³⁄₄”D • • • • • • • • •

5555 Headbox5¹⁄₂”H x 5¹⁄₂”D • • • • • • • • •

7090 Headbox9”H x 7”D • • • • • • • • •

Custom Pocket(Call for details)

ROLLSTAR


At a glance…


SHADE STYLE• Tube/Valance MatrixLIFTING SYSTEM• N/AHEM STYLE• N/ATOP TREATMENT• For SL Clutches, Automate and Somfy Motor SystemsLIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• N/A

4” Smooth

5” Smooth

5”D-Tube

(for heavy shades)

DESCRIPTION

5050 Headbox5”H x 4³⁄₄”D •

5555 Headbox5¹⁄₂”H x 5¹⁄₂”D • •

7090 Headbox9”H x 7”D • • •


ROLLSTAR


At a glance…SHADE STYLE• Tube/Valance MatrixLIFTING SYSTEM• N/AHEM STYLE• N/ATOP TREATMENT• For L-SystemsLIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• N/A

Index No. 5.6.19 cont.1¹⁄₄” Tube

with Key Drive

1¹⁄₂” Tube

with Key Drives

1³⁄₄” Tube

with Key Drives, Smooth

1³⁄₄” Tube


(thick wall)

2¹⁄₈” Tube


(thick wall)

DESCRIPTION

L-System Fascia3x3 (Snap-on)3³⁄₄”H x 3³⁄₈”D

• •

L-System Fascia4x4 (Snap-on)4³⁄₈”H x 4¹⁄₈”D

• • •

4040 Covered Fascia4”H x 4”D

• • • •

4045 Headbox4¹⁄₂”H x 4”D • • • • *

5050 Headbox5”H x 4³⁄₄”D • • • • *

5555 Headbox5¹⁄₂”H x 5¹⁄₂”D * * * * *

7090 Headbox9”H x 7”D * * * * *


* Depends on shade height or for special application. Call for assistance.


At a glance…

Index No. 5.6.9

ROLLSTAR-EX

SHADE STYLE• Rollstar-EXLIFTING SYSTEM• Clutch - Continuous Chain Operator (exterior)• DC50 Low Voltage, Series 400 & 500 MotorsHEM STYLE• Covered Hem PocketTOP TREATMENT• HeadboxLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Floor-Mount• Wall-Mount

Headbox

Headbox Shelf

Stainless Steel Cable


Guide Wire End Cap

Guide Wire End Cap

Covered Hem Pocket

Upper Cable Mount

FLOORCable Mounts

WALL Cable MountsFLOOR-MOUNT ASSEMBLY

WALL-MOUNT ASSEMBLY(shown without headbox)


At a glance…

Index No. 5.6.10

SHADE STYLE• N/ALIFTING SYSTEM• N/AHEM STYLE• Covered Hem Pocket or Exposed Hem BarTOP TREATMENT• N/ALIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• Rollstar-EX Shades Parts Detail

Crimp SleeveCrimp Sleeve

Crimp Sleeve

Crimp Sleeve

Tension SpringTension Spring

Upper Cable CylinderUpper Cable Cylinder

UPPE

R CA

BLE

MO

UNTS

(inst

alle

d in

side

Hea

dbox

)

FLO

OR

CABL

E M

OUN

T

WALL CABLE M

OUNT Lower Cable CylinderFloor Mount

Cable Cylinder

Slotted L-Brack-

Ceiling Bracket

Slotted L-Brack-

L-Bracket

Guide Wire End Cap(showing small End Cap)

Guide Wire End Cap(showing small End Cap

SMALLCovered Hem Pocket

LARGE Exposed Hem Bar

LARGE Covered Hem Pocket

Thumb NutThumb Nut



Lock Nut

Lock Nut

Lock NutLock Nut

Thumb Nut

Thumb Nut

Cylinder Cover

CABLE ASSEMBLY(Wall System)

HEM BAR OPTIONS(Floor & Wall Systems)

CABLE ASSEMBLY(Floor System)

ROLLSTAR-EX

• The small hem bar is ⁵⁄₈” in diameter. This size can be used for shades up to 74”. • The large hem bar is 1³⁄₈” diameter. This size can be used for any shade but must be used for shades wider than 74”.


At a glance…SHADE STYLE• Tube/Valance MatrixLIFTING SYSTEM• N/AHEM STYLE• N/ATOP TREATMENT• For Rollstar-EX SystemsLIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• N/A

Index No. 5.6.11

ROLLSTAR-EX

1¹⁄₄” Tube with

Key Drive

1¹⁄₂” Tube with

Key Drive

1³⁄₄” Tube with

Key Drive, Smooth

1³⁄₄” Tube with

Key Drive, Smooth

(thick wall)

2¹⁄₈” Tube with

Key Drive, Smooth

(thick wall)

DESCRIPTION

4045 Headbox4¹⁄₂”H x 4”D • • • • *

5050 Headbox5”H x 4³⁄₄”D • • • • *

5555 Headbox5¹⁄₂”H x 5 ”D * * * * *

7090 Headbox9”H x 7”D * * * * *


* Depends on shade height or for special application. Call for assistance. Note: Reverse Roll is not available with Rollstar-EX Shades.

Documents

Rollstar · 2020. 11. 5. · 5.6.9 Rollstar-EX Hem Pocket Headbox Not Shown Floor or Wall Mount Systems 79 5.6.10 Rollstar-EX (Cable, Parts & Hem Bar Assembly) Covered Hem Pocket