ROLLS-ROYCE ENGINEERING SPECIFICATION INDEX

Updated

8/31/2021

EDI - Joy Hyde & Jason Gardellis - [email protected] & [email protected]

EDS - Joy Hyde & Jason Gardellis - [email protected] & [email protected]

EDT & RRES - Joy Hyde & Jason Gardellis - [email protected] & [email protected]

EIS, EMS, EPS - [email protected]

PTS (All 250) - [email protected]

PTS (All 501K) - [email protected]

PTS (T406/AE1107) - [email protected]

PTS (AE2100) - [email protected]

PTS (AE3007) - [email protected]

Specification

NumberChg.Ltr Issue/ Rev. Date Specification Title Remarks

DRRQ-737005 6/18/2019Inspection Requirements for Cast and Machined Single Crystal Turbine Blades

FabrPUBLISHED

EDI-106 B 4/18/1957 PREPARATION FOR STORAGE AND SHIPMENT PUBLISHED

EDI-108 A 6/25/1956 LUBRICATION AND SEALING COMPOUNDS FOR ASSEMBLY PUBLISHED

EDI-109 A 9/5/1957 TURBO JET ENGINE ASSEMBLY PUBLISHED

EDI-111 2/26/1954 TURBINE ROTORS PUBLISHED


EDI-113 M 5/12/2006 INSTRUCTIONS FOR SAFETY LOCKING DEVICES PUBLISHED

EDI-114 B 8/26/1970 RECOMMENDATIONS FOR INSTALLING HELICOILS PUBLISHED

EDI-12 8/26/1949 INVOLUTE SPLINE TOLERANCE (CRITICAL) PUBLISHED

EDI-120 E 9/23/1958 COMPOUNDS FOR ASSEMBLY PUBLISHED

EDI-122 7/22/1952 ENGINE WEIGHING PROCEDURE PUBLISHED

EDI-123 C 4/18/1977 SURFACE FINISH CONTROL PUBLISHED

The following Index is updated monthly and is intended to be used for REFERENCE ONLY. For additional information concerning specifications please

use the table of contacts listed below.

Internal Rolls-Royce Contact List - For External Request Contact Your RR Buyer

ROLLS-ROYCE CORPORATION

ROLLS-ROYCE ENGINEERING SPECIFICATION INDEX

1

Specification


EDI-133 D 6/20/1986 REWORK OF COMPRESSOR & TURBINE BLADES & PUBLISHED

EDI-138 G 9/26/1967 REQUIREMENTS FOR HIGHLY STRESSED FORGED PARTS PUBLISHED

EDI-139 1/2/1953 VIBRATION FREQUENCY DETERMINATION FOR COMPRESSOR ROTORS PUBLISHED

EDI-147 9/5/1957 TURBO JET ENGINE ASSEMBLY PUBLISHED

EDI-148 D 6/25/1957 PLANETARY ASSEMBLY PUBLISHED

EDI-152 D 1/3/1958 COMPRESSOR ROTOR ASSEMBLY PUBLISHED

EDI-155 A 6/6/1956 CENTRIFUGAL SETTING OF DUMP VALVES IN CLUTCH COVER PUBLISHED

EDI-163 B 5/25/1955 ENGINE SHIPPING CONTAINER PREPARATION & PUBLISHED

EDI-171 AJ 4/12/2012 LUBRICATION AND SEALING COMPOUNDS FOR ASSEMBLY PUBLISHED

EDI-174 C 3/20/1957 TURBO JET ENGINE ASSEMBLY PUBLISHED

EDI-178 D 9/23/1993 RADIO INTERFERENCE PUBLISHED

EDI-182 A 5/15/1956 PREPARATION FOR STORAGE AND SHIPMENT PUBLISHED

EDI-183 B 8/6/1959 VIBRATION FREQUENCY DETERMINATION FOR FI PUBLISHED

EDI-185 C 7/24/1958 TURBO JET ENGINE ASSEMBLY PUBLISHED

EDI-186 9/1/1954 PREPARATION FOR STORAGE AND SHIPMENT PUBLISHED

EDI-188 A 3/29/1957 PREPARATION FOR STORAGE AND SHIPMENT PUBLISHED

EDI-189 A 6/25/1956 ENGINE SHIPPING CONTAINER MARKING INSTRU PUBLISHED

EDI-191 B 8/12/1957 TURBO JET ENGINE ASSEMBLY PUBLISHED

EDI-198 9/27/1956 TURBO PROP ENGINE ASSEMBLY PUBLISHED

EDI-200 Y 6/22/2009 STANDARD TORQUE LIMITS PUBLISHED

EDI-201 4/13/1956 BLADE MOMENT BALANCE PUBLISHED

EDI-202 B 10/21/1957 SEAL MEASUREMENTS FOR ASSEMBLY PUBLISHED

EDI-203 5/31/1956 COMPRESSOR ROTOR ASSEMBLY, BALANCE AND H PUBLISHED

EDI-204 B 2/6/1968 TURBO PROP ENGINE ASSEMBLY (T56-A-9 & 11 PUBLISHED

EDI-205 1/7/1959 TURBO JET ENGINE ASSEMBLY PUBLISHED

EDI-206 J 1/16/1968 PROP JET ENGINE ASSEMBLY(501-D13,13A,13D PUBLISHED

EDI-207 F 12/10/1990 COMPRESSOR WHEEL ASSEMBLY SPIN TEST PUBLISHED

EDI-209 A 3/10/1972 PLANETARY ASSEMBLY PUBLISHED

EDI-210 2/22/1957 VIBRATION FREQUENCY DETERMINATION FOR CO PUBLISHED

EDI-211 A 7/21/1958 IDENTIFICATION PACKAGING, O RING PUBLISHED

EDI-212 Y 5/2/2014 Rolling Element Bearing Requirements PUBLISHED

EDI-213 2/4/1958 TURBO PROP ENGINE ASSEMBLY PUBLISHED

2

Specification


EDI-214 N 9/11/1969 TURBOPROP ENGINE ASSEMBLY (T56-A-7A,USAF PUBLISHED

EDI-217 A 3/31/1964 PROPELLER BRAKE ASSEMBLY BENCH TEST /CON PUBLISHED

EDI-219 A 1/25/1960 VISUAL INSPECTION OF RIVETS AFTER ASSEMB PUBLISHED

EDI-220 A 7/8/1960 SHIM INSTALLATION PUBLISHED

EDI-221 9/23/1960 SCREW THREADS - GENERAL SPECIFICATION PUBLISHED

EDI-226 C 10/12/1971 OUT OF ROUND ROLLER BRG INTERNAL DIAMETR PUBLISHED

EDI-228 A 10/3/2009 SUPPLEMENT TO ENGINEERING DRAWINGS OF BLADES AND VANES PUBLISHED

EDI-229 U 2/12/2013 PROP JET ENGINE ASSEMBLY (T56-A-10WA,A8A PUBLISHED

EDI-231 A 2/12/1960 BOLT SWAGING PUBLISHED

EDI-234 A 1/4/1962 SAFETY COUPLING ASSEMBLY TEST PUBLISHED

EDI-235 A 10/24/1960 TURBINE UNIT ASSEMBLY MEASUREMENTS PUBLISHED

EDI-237 D 8/6/1964 FACTORY RECONDITIONING - SEPARABLE ROLLER BALL BEARINGS PUBLISHED

EDI-239 B 6/17/1969 SHIM INSTALLATION PUBLISHED

EDI-243 A 3/23/1964 TURBINE ROTOR BALANCE PUBLISHED

EDI-245 M 7/10/2018 SURFACE TREATMENT OF MAGNESIUM EXTERNAL PUBLISHED

EDI-249 B 10/30/1968 TURBINE VANE SEGMENT & BLADE AREA MEASUR PUBLISHED

EDI-2500 C 12/22/1977 POST TEST ACCEPTANCE LIMITS PUBLISHED

EDI-2501 B 7/9/2018 POST TEST ACCEPTANCE LIMITS PUBLISHED

EDI-2502 C 10/8/1997 POST TEST ACCEPTANCE LIMITS (250B17, B17 PUBLISHED


EDI-2504 V 9/26/2011 POST TEST ACCEPTANCE LIMITS PUBLISHED

EDI-2505 V 7/29/2015 POST TEST ACCEPTANCE LIMITS PUBLISHED

EDI-2506 C 9/26/2011 POST TEST ACCEPTANCE LIMITS PUBLISHED


EDI-2508 7/10/2009 AE3007 ACCESSORY GEARBOX ACCEPTANCE TEST PUBLISHED

EDI-2509 E 3/12/2015 AE2100D/J GMAD ACCEPTANCE TEST PROCEDURE PUBLISHED

EDI-2510 D 11/1/2019 LIFTFAN CLUTCH POST TEST ACCEPT LIMIT PUBLISHED

EDI-2511 F 11/1/2019 LIFTFAN GEARBOX POST TEST ACCEPTANCE LIMITS PUBLISHED

EDI-2512 C 3/7/2017 LIFTFAN LUBE SYSTEM POST TEST ACCEPT LIM PUBLISHED


EDI-2514 C 7/7/2021 LiftFan Turbomachinery Post Test Accepta PUBLISHED

EDI-252 B 3/1/2004 COMPRESSOR BLADES-VISUAL DEFECTS-LIMITS NON-CURRENT

3

Specification


EDI-253 C 8/30/2004 SAFETY COUPLING-LAPPING & BURNISHING INS PUBLISHED

EDI-254 C 4/22/1966 TURBINE ROTOR ASSEMBLY & BALANCE PUBLISHED

EDI-255 7/17/1963 TAPER REQUIREMENTS FOR MATING PARTS - GA PUBLISHED

EDI-261 D 2/22/2008 TURBINE WHEEL & TURBINE NOZZLE ASSY AREA PUBLISHED

EDI-27 B 12/8/1954 REWORK OF COMPRESSOR & TURBINE AIRFOILS NON-CURRENT

EDI-270 2/10/1964 WEIGHT CONTROL PROCEDURE AND DATA-BASIC REQUIREMENTS PUBLISHED

EDI-275 F 10/25/1966 SELECTED MISSION ENVIRONMENT (SMET) AND QUALIFICATION TESTS PUBLISHED

EDI-276 B 4/10/1967NITROGEN PURGE AND PRESSURIZATION - LM DESCENT STAGE PROPELLANT

TANK PROG. PUBLISHED

EDI-278 F 7/7/1966IDENTIFICATION AND TRACEABILITY--LEM DESCENT STAGE PROPELLANT

TANK PROGRAM PUBLISHED

EDI-280 AD 8/6/2018 TURBO PROP ENGINE ASSEMBLY (T56-A-15, 16 PUBLISHED

EDI-281 1/31/1964DETERMINATION OF NET COMPONENT WEIGHTS OF UTC PRESSURIZATION

AND INJECTANT TANKSPUBLISHED

EDI-282 H 10/31/2005 TURBINE ROTOR ASSEMBLY PUBLISHED

EDI-284 C 11/13/1964INSTRUCTIONS FOR REUSE OF BOLTS & WASHERS USED FOR HYDOTEST OF

UTC TVC TANKS PUBLISHED

EDI-286 A 12/10/1968 PROCESS CLEANING OF TITANIUM PARTS PUBLISHED

EDI-287 A 7/19/1965 INDUSTRIAL ENGINE ASSEMBLY (501-K5,K13,K PUBLISHED

EDI-288 A 7/19/1965 NATURAL GAS COMPRESSOR SET, GAS TURB POW PUBLISHED

EDI-289 T 6/18/2012 TURBO-PROP ENGINE ASSEMBLY (T56-A-14) PUBLISHED

EDI-290 N 4/6/1990 TURBOPROP ENGINE ASSEMBLY (501-D22, D22A PUBLISHED

EDI-291 AF 1/27/1993 TURBOSHAFT ENGINE ASSY (T63-A-5A, 700; 2 PUBLISHED

EDI-292 9/16/1965 INSTRUCTIONS FOR INSTALLING KAYLOCK INSERTS PUBLISHED

EDI-294 B 9/1/1966 BREECH & EVACUATOR MECHANISM ASSY, BUILD PUBLISHED

EDI-296 B 8/20/1969 TURBOPROP ENGINE ASSY (501-D36) PUBLISHED

EDI-297 B 2/24/1967 PRESERVATION & PACKING INSTRUCTIONS FOR PUBLISHED

EDI-299 B 2/14/1967 BREECH MECHANISM ASSY, BUILD INSTRUCTIONS (EXPERIMENTAL ONLY) PUBLISHED

EDI-301 5/9/1967 GENERATOR SET, GAS TURBINE POWERED (AG91 PUBLISHED

EDI-302 C 1/23/1978 COMPR EXTENSION SHAFT-SIDE GEAR BACKLASH PUBLISHED

EDI-303 7/19/1967 HI-SPEED BALL BRG-INTERNAL DIA CLEARANCE PUBLISHED

EDI-304 P 2/17/2015 TRACEABILITY OF SERIALIZED PARTS PUBLISHED

4

Specification


EDI-305 C 6/28/1984 BEVEL GEAR SETTING INSTRUCTIONS PUBLISHED

EDI-306 C 10/24/1972 STANDARD TORQUE LIMITS PUBLISHED

EDI-308 B 12/12/1968 FORGING DRAWING DESIGN REQUIREMENTS PUBLISHED

EDI-309 AY 6/2/1989 TURBOFAN ENGINE ASSEMBLY PUBLISHED

EDI-31 B 12/15/1955 COMPRESSOR ROTOR PROCESS & ASSEMBLY NON-CURRENT

EDI-310 10/24/1967 GUILLOTINE GAGE INSPECTION COMPRESSOR BL PUBLISHED

EDI-311 C 9/29/1993 IN-PROCESS & FINISHED PARTS ACCOUNTABILITY PUBLISHED

EDI-312 2/27/1968 REDUCTION GEAR PLANETARY ASSEMBLY PUBLISHED

EDI-313 B 2/10/1984 TURBINE BLADES-VISUAL LIMITS OF ACCEPTAB PUBLISHED

EDI-314 H 2/20/2008 APPROVAL OF CASTING, FORGING, AND FORMIN PUBLISHED

EDI-315 D 7/23/2009 ASSEMBLY INSTRUCTIONS FOR RIGGING RIGID PUBLISHED

EDI-316 2/19/1970 COMPRESSOR CASE ABRADABLE LINING DIMENSI PUBLISHED

EDI-317 2/6/1970 AIRFLOW REGULATOR ASSY-THERMAL RELIEF VA PUBLISHED

EDI-319 CU 10/16/2016 TURBOSHAFT ENGINE ASSY (250 SERIES II- C PUBLISHED

EDI-320 8/19/1970 DEFINING BACKLASH IN BEVEL GEARS PUBLISHED

EDI-321 B 8/8/1980 PROPELLER REDUCTION GEAR BOX DISASSEMBLY PUBLISHED

EDI-322 8/19/1970 ASSEMBLY OF THRUST WIRES IN TUBING COUPL PUBLISHED

EDI-323 8/26/1970 CONTROL OF THREAD RUN OUT ON STUDS PUBLISHED

EDI-324 H 5/21/1981 TURBO PROP ENGINE ASSY (250-B15G) PUBLISHED

EDI-325 A 8/2/1971 RECOMMENDATIONS FOR THE INSTALLATION & R PUBLISHED

EDI-326 D 6/12/1997 TURBINE ROTOR ASSY (501-K16A) PUBLISHED

EDI-327 A 6/12/1997 POWER TURBINE WHEEL ASSY (501-K16A) PUBLISHED

EDI-328 CK 10/11/2016 TURBO PROP ENG ASSY (250 SERIES II; B17, PUBLISHED

EDI-329 J 6/22/1990 TURBO PROP ENG ASSY (T56-A-422, 425) PUBLISHED

EDI-330 A 6/2/1987 COMBUSTION LINER ASSY, FLOW AREA MEASURE PUBLISHED

EDI-331 B 9/29/1993 TRACEABILITY RECORD REQUIREMENTS FOR PARTS SHIPPED FROM ALLISON PUBLISHED

EDI-333 5/29/1975 PROCEDURE FOR REMOVING CONDUCTIVE COATIN PUBLISHED

EDI-334 A 4/6/1978 TURBOSHAFT ENGINE ASSEMBLY (250 SERIES I PUBLISHED

EDI-335 DG 11/7/2018 TURBO SHAFT ENGINE ASSEMBLY(250SERIES IV PUBLISHED

EDI-336 11/23/1976 TURBINE BLADE TIP SHAKE CONTROL PUBLISHED

EDI-337 AY 2/1/2001 TURBOSHAFT ENGINE ASSEMBLY PUBLISHED

5

Specification


EDI-338 8/26/1977 FRONT LP COMPRESSOR ROLLER BEARING ASSEM PUBLISHED

EDI-339 A 7/28/1981 HP TURBINE THROAT AREA MEASUREMENT PUBLISHED

EDI-340 C 3/11/1982 BEVEL GEAR SETTING INSTRUCTIONS TF41 ALL PUBLISHED

EDI-341 AM 2/1/2001 TURBOSHAFT ENGINE ASSY (250 SERIES III C PUBLISHED

EDI-342 L 1/27/1987 TURBOSHAFT ENGINE ASSY (570-KA,KC,KF) PUBLISHED

EDI-343 A 3/11/1982 PROPELLER REDUCTION G/B DISASSEMBLY & AS PUBLISHED

EDI-344 A 8/3/1981 COMBUSTION CHAMBER CROSSOVER TUBE CLAMP PUBLISHED

EDI-345 C 6/18/2012 TURBO-SHAFT ENGINE ASSEMBLY 501-K17 PUBLISHED

EDI-350 10/28/1981 MARINE POWER TURBINE RUNOUT INSPECTION P PUBLISHED

EDI-351 J 9/23/2014 PROPELLER RED. G/B DISASSEMBLY AND ASSY PUBLISHED

EDI-353 3/18/1986 TURBOSHAFT ENGINE ASSEMBLY PUBLISHED

EDI-354 6/2/1983 COMPRESSOR BLADES-VISUAL IMPERFECTIONS-L PUBLISHED

EDI-355 A 7/13/1983 SERIES III TURBINE VANE INNER BAND SEAL PUBLISHED

EDI-357 10/4/1983 GUIDELINES FOR ACCEPTANCE OF TURBINE WHE PUBLISHED

EDI-358 J 6/18/2012 TURBOPROP ENGINE ASSEMBLY PUBLISHED

EDI-359 BU 10/11/2016 TURBO SHAFT ENGINE ASSEMBLY PUBLISHED

EDI-36 C 3/27/1955 STRAIGHT AND SPIRAL BEVEL GEAR REQUIREME PUBLISHED

EDI-360 11/7/1985 GUIDELINES FOR ACCEPTANCE OF RTD TEMPERA PUBLISHED

EDI-362 F 4/21/2011 COMBUSTION LINER CROSSOVER CLAMP INSTALL PUBLISHED

EDI-363 12/11/1985 TEST FOR SPURIOUS EMF'S IN THERMOCOUPLE WIRE PUBLISHED

EDI-364 1/6/1987 PIN HOLE BUSHING REWORK PROCEDURE FOR HP PUBLISHED

EDI-365 G 2/12/2013 TURBOSHAFT ENGINE ASSEMBLY PUBLISHED

EDI-366 E 5/7/2009 CLEANING,HANDLING,PRESERVATION AND PACKAGING OF BEARINGS PUBLISHED

EDI-368 A 3/13/1991 REWORK OF COMPRESSOR BLADES AND VANES PUBLISHED

EDI-369 B 2/28/2014 PROCEDURE FOR SWAGING DYNAMIC BEAM SEAL FITTING TO RIGID TUBING PUBLISHED

EDI-370 B 8/9/2005 TRACEABILITY REQUIREMENTS FOR CRITICAL BEARINGS PUBLISHED

EDI-371 5/24/1988 YT406-AD-400 PFR ENGINE CONFIGURATION AS PUBLISHED

EDI-372 8/11/1988 COMPRESSOR TO COMPRESSOR CASE MATCH-MACH PUBLISHED

EDI-375 5/23/1989 FLARING (SWAGING) OF SHANK NUTS PUBLISHED

EDI-377 7/14/1989 INSPECTION CRITERIA FOR TURBINE BLADES M PUBLISHED

EDI-379 8/9/1989 TEST FOR MATL VERIF. OF INCOMING "T" T/C PUBLISHED

6

Specification


EDI-382 3/12/1990 ROTATING SEALS JOURNALS-LEAD MEASUREMENT PUBLISHED

EDI-383 4/6/1990 ELECTRICAL WIRING HARNESS CONTINUITY TES PUBLISHED

EDI-384 4/6/1990 ELECRICAL WIRING HARNESS DIELECTRIC HIGH-POTENTIAL TESTING PUBLISHED

EDI-385 T 1/5/2016 SURFACE TREATMENT OF MAGNESIUM EXTERNAL PUBLISHED

EDI-386 V 12/9/2016 SURFACE TREATMENT FOR EXTERNAL MAGNESIUM PUBLISHED

EDI-387 A 6/1/1992 SHIM INSTALLATION-CESB PUBLISHED

EDI-388 C 7/16/2013 TRACEABILITY OF DATE CODE PUBLISHED

EDI-389 M 3/25/2009 TURBO SHAFT ENGINE ASSEMBLY PUBLISHED

EDI-390 A 9/29/1992 COMPRESSOR WHEEL PRE-SPINNING PROCEDURE PUBLISHED

EDI-391 10/23/1991MINIMUN CLEARANCE REQUIREMENTS FOR ELECTRICAL WIRING AND

HARNESS ASSEMBLIES PUBLISHED

EDI-392 11/6/1991 PRODUCT IDENTIFICATION MARKING PUBLISHED

EDI-393 HJ 6/24/2021 ASSEMBLY AND DISASSEMBLY INSTRUCTIONS PUBLISHED

EDI-394 F 11/12/2002 SURFACE TREATMENT OF MAGNESIUM EXTERNAL PUBLISHED

EDI-395 B 8/16/2011 TOOTH CONTROL FOR GEARS PUBLISHED

EDI-400 2/19/1973 IGT ASSY - PROCEDURES PUBLISHED

EDI-402 G 10/13/1986 PATRIOT TURBINE ENGINE ASSEMBLY PUBLISHED

EDI-403 HC 12/12/2016 ENGINE ASSEMBLY INSTRUCTIONS PUBLISHED

EDI-404 10/21/1993 SAAB 2000/AE PSP CLAMPING AND TIE DOWN D PUBLISHED

EDI-405 8/12/1994 PRE-STRESS WHEEL PROCEDURE PUBLISHED

EDI-406 AB 9/11/2020 ASSEMBLY AND DISASSEMBLY INSTRUCTIONS PUBLISHED

EDI-407 G 7/10/2018 COMBUSTION CHAMBER CROSSOVER TUBE AND DR PUBLISHED

EDI-408 C 12/4/2015 EXPERIMENTAL ASSEMBLY HARDWARE CLEANING CAPABILITIES PUBLISHED

EDI-409 2/5/1996 ACCESSORY BEVEL DRIVE GEAR SHIMMING PUBLISHED

EDI-410 10/15/1996 INSTRUCTIONS FOR STAKING PINS BETWEEN BU PUBLISHED

EDI-411 C 9/4/2018 INSTALLATION OF KEY LOCKED INSERTS AND S PUBLISHED

EDI-412 C 4/23/2007 ASSEMBLY INSTRUCTIONS PUBLISHED

EDI-413 4/21/1997 FLUSH PROCEDURE FOR CRITICAL GMAD PASSAG PUBLISHED

EDI-415 A 3/15/2001 TORQUEMETER SHAFT PRE-STRESSING PROCEDUR PUBLISHED

EDI-416 GJ 5/7/2019 ENGINE ASSEMBLY INSTRUCTIONS PUBLISHED

EDI-417 DV 7/16/2019 ENGINE ASSEMBLY INSTRUCTIONS PUBLISHED

EDI-4211-CS 6/9/2010 Driveshaft Measurement System Specificat PUBLISHED

7

Specification


EDI-425 2/8/2000 LIFTFAN LUBE MANIFOLD, PUMP, & TANK ASSY PUBLISHED

EDI-426 Y 9/11/2020 ASSEMBLY AND DISASSEMBLY INSTRUCTION PUBLISHED

EDI-427 K 12/1/2017 ENGINE ASSEMBLY INSTRUCTIONS AE2100J PUBLISHED

EDI-428 D 5/12/2006 TURBINE ROTOR ASSEMBLY (TURBINE UPGRADE PUBLISHED

EDI-4289 4/13/2012SMALL GAS TURBINE FADED (SGTF) COMBINATION ANTI-ICE VALVE (AIV)

COMPONENT REQUIRPUBLISHED

EDI-429 B 6/18/2013 TORQUE TIGHTENING OF THREADED PARTS PUBLISHED

EDI-4292 4/13/2012Small Gas Turbine FADEC (SGTF) Torquemeter Oil Pressure (TMOP)

Component RequirePUBLISHED

EDI-4293 4/13/2012Small Gas Turbine FADEC (SGTF) Main Oil Pressure/Main Oil Temperature

(MOP/MOT) PUBLISHED

EDI-4294 4/13/2012Small Gas Turbine FADEC (SGTF) Np Speed Sensor Component Requirements

Document (PUBLISHED

EDI-430 7/31/2000 JSF CLUTCH ASSEMBLY INSTRUCTIONS PUBLISHED

EDI-433 A 12/16/2009TRANSPORT REQUIREMENTS FOR ASSEMBLED PRODUCTION AND FIELD

ENGINES PUBLISHED

EDI-434 10/31/2000 MATCH MACHINING-1ST & 2ND STG T/WHEELS PUBLISHED

EDI-435 9/28/2000 BEVEL GEAR SETTING INSTRUCTIONS PUBLISHED

EDI-436 E 3/30/2012 IN-LINE REWORK PROCEDURE FOR U-720 TURBI PUBLISHED

EDI-439 A 6/18/2001 MATCH MACH OF 1ST & 2ND STG TURB WHEELS PUBLISHED

EDI-440 B 12/19/2002 PART IDENTIFICATION MARKING USING DATA M PUBLISHED

EDI-441 A 5/21/2015 MATCH MACH OF 1ST & 2ND STG TURB WHEELS PUBLISHED

EDI-442 H 9/9/2004 ENGINE ASSEMBLY INSTRUCTIONS PUBLISHED

EDI-443 9/26/2001 1ST STG TURB ROTOR BLADE PLATFORM CLEARA PUBLISHED

EDI-445 E 8/15/2003 ENGINE ASSEMBLY INSTRUCTIONS PUBLISHED

EDI-450 A 4/23/2007 ENGINE ASSY INSTRUCTIONS PUBLISHED

EDI-452 E 6/26/2018 SURFACE TREATMENT OF MAGNESIUM FRONT FRA PUBLISHED

EDI-453 B 4/29/2005 INSTALLATION OF 5TH AND 10TH STAGE COMPR PUBLISHED

EDI-454 B 7/12/2005 TORQUEMETER ASSY BALANCING PROCEDURE PUBLISHED

EDI-455 1/29/2004 TURB INLET ASSY - 1ST STG, GRIN FIX INST PUBLISHED

EDI-456 3/21/2005 SURFACE TREATMENT OF ALUMINUM MAINFRAME PUBLISHED

EDI-458 BW 6/4/2020 ENGINE ASSEMBLY INSTRUCTIONS PUBLISHED

8

Specification


EDI-460 P 43123 IDENTIFICATION MARKING METHODS AND CONTR PUBLISHED

EDI-461 A 04/23/1013 ASSEMBLY & DISASSEMBLY OF 501-KB7, KC7, KH7 BOOST COMPRESSOR

MODULE PUBLISHED

EDI-462 K 7/8/2019 SURFACE TREATMENT OF ALUMINUM STRUCTURES PUBLISHED

EDI-463 C 8/29/2014 Torquemeter Assembly Calibration - Engin PUBLISHED

EDI-464 C 4/27/2021 SURFACE TREATMENT OF ALUMINUM STRUCTURES PUBLISHED

EDI-466 L 9/6/2018 TURBOPROP ENGINE ASSEMBLY PUBLISHED

EDI-467 E 9/24/2015 SURFACE TREATMENT OF ALUMINUM MAINFRAME PUBLISHED

EDI-468 B 8/23/2017 IN-LINE REWORK PROCEDURE FOR AE TITANIUM PUBLISHED

EDI-469 A 2/18/2010 TORQUEMETER AVERAGE ANGLE MEASUREMENT PUBLISHED

EDI-471 B 11/20/2006 TITANIUM BRACKETS FROM SHEET STOCK, GENE PUBLISHED

EDI-472 B 5/29/2009 TORQUEMETER ASSEMBLY CALIBRATION ENG TES PUBLISHED

EDI-473 C 5/15/2009 ASSEMBLY INSTRUCTIONS FOR RIGGING RIGID TEST ASSEMBLIES PUBLISHED

EDI-474 R 4/10/2017 TURBOSHAFT ENGINE ASSEMBLY PUBLISHED

EDI-475 H 5/6/2011 COMPRESSOR MODULE ASSEMBLY PUBLISHED

EDI-476 N 6/4/2015 TURBINE MODULE ASSEMBLY PUBLISHED

EDI-477 P 2/25/2015 GEARBOX MODULE ASSEMBLY PUBLISHED

EDI-479 D 3/17/2010 NOSECONE PHM VIBRATION SENSOR & DOGHOUSE PUBLISHED

EDI-48 C 3/2/1953 TAILCONE AND AFTERBURNER WOODEN SHIPPING CONTAINER MARKING PUBLISHED

EDI-480 10/24/2008 LIFTFAN MODULE ASSEMBLY PUBLISHED

EDI-482 8/15/2007 MARKING OF MATCHED SET IDENTIFIERS PUBLISHED

EDI-483 12/12/2007 VAVBN PUBLISHED

EDI-485 C 8/14/2009 AE1107 TORQUEMETER ASSEMBLY AND BAL INST PUBLISHED

EDI-486 10/13/2008 AE1107 TORQUESMETER CALIBRATION INSTR PUBLISHED

EDI-488 7/18/2011 Compressor Performance and Surge Line As PUBLISHED

EDI-489 2/3/2008 PROFILE TOLERANCE BLENDING PUBLISHED

EDI-490 AC 12/12/2016 ENGINE ASSEBLY INSTRUCTIONS PUBLISHED

EDI-491 J 3/6/2017 SURFACE TREATMENT OF MAGNESIUM PUBLISHED

EDI-492 AU 5/28/2020 EINGINE ASSEMBLY INSTRUCTIONS PUBLISHED

EDI-493 9/2/2008 TURBOPROP ENGINE ASSEMBLY PUBLISHED

EDI-495 10/23/2009 ACCESSORY GEARBOX ASSEMBLY INSTRUCTIONS PUBLISHED

9

Specification


EDI-496 G 10/30/2014 VAVBN PUBLISHED

EDI-497 D 2/12/2011 ASSEMBLY & DISASSEMBLY INSTRUCTIONS - INTERNAL GEARBOX PUBLISHED

EDI-498 B 7/16/2010INTERNAL GEARBOX ASSEMBLY AND DISASSEMBLY INTO CARE MODULE

INSTRUCTIONS. PUBLISHED

EDI-499 9/2/2008 TURBOPROP ENGINE ASSEMBLY PUBLISHED

EDI-502 9/18/2008 F136 LPTS2 ENG 004-1 ASSEMBLY INSTRUCTIO PUBLISHED


EDI-520 BG 6/28/2021 LIFTFAN MODULE ASSY - ISR CONFIGURATION PUBLISHED

EDI-521 D 5/26/2010 GENERAL ENGINE ASSEMBLY PUBLISHED

EDI-523 B 2/17/2010 ACCESSORY GEARBOX ASSY. & DISASSY. TO FAN MODULE INSTRUCTIONS PUBLISHED

EDI-524 AK 1/18/2019 ENGINE ASSEMBLY INSTRUCTIONS PUBLISHED

EDI-525 2/17/2009 SUPPLIER TRACKING OF CASTINGS (ALL MODEL PUBLISHED

EDI-529 5/29/2009MATCH MACHINIG OF 1st AND 2nd STG TURBINE WHEELS AND 2nd STG

TURBINE NOZZLE PUBLISHED

EDI-530 A 5/17/2011 TORQUE PAINT WHEN,WHERE & HOW TO APPLY PUBLISHED

EDI-533 C 12/4/2015 LIFTFAN CLEANING USING SOLID DRY ICE PUBLISHED

EDI-534 A 4/28/2014 Alternate Inspection Criteria for RR300 PUBLISHED

EDI-535 A 9/10/2018VISUAL INSPECTION AND ACCEPTANCE CRITERIA FOR HELICOPTER SHEET

METAL PRODUCTS PUBLISHED

EDI-536 C 11/30/2015 AE1107C PUAD ACCEPTANCE TEST PROCEDURE PUBLISHED

EDI-537 C 11/30/2015 AE2100D/J PUAD ACCEPTANCE TEST PROCEDURE PUBLISHED

EDI-538 B 11/14/2014 AE2100 PUAD ASSEMBLY & DISASSEMBLY PROD PUBLISHED

EDI-539 B 11/14/2014 AE 1107C AGB Assembly andDisassembly Pro PUBLISHED

EDI-54 A 7/21/1955 SIZING TURBINE BUCKET-DOVETAILS PUBLISHED

EDI-540 2/2/2011 SURFACE TREATMENT OF F136 GEARBOX ASSY PUBLISHED

EDI-541 E 5/17/2021 AE 2100D3/J GEARBOX ACCY DR (GMAD) ASSY PUBLISHED

EDI-542 C 12/7/2016AE 2100D2, D2A, D2B Gearbox Mounted Accessory Drive (GMAD) Assembly

and DisassemPUBLISHED

EDI-546 7/20/2010 TRADEMARK FOR DATA PLATES PUBLISHED

EDI-549 11/10/2011 Turboprop Engine Assembly PUBLISHED

EDI-55 A 7/21/1952 COMPRESSOR ROTOR PUBLISHED

EDI-553 6/23/2011 RR500 Compressor Assembly PUBLISHED

10

Specification


EDI-554 1/27/2013 Turboshaft Engine Assembly PUBLISHED

EDI-555 3/12/2012 Turbine Module Assembly PUBLISHED

EDI-556 B 7/29/2015 AE 3007 AGB ACCEPTANCE TEST PROCEDURE PUBLISHED

EDI-557 7/13/2011 Power and Accessory Gearbox Module Assem PUBLISHED

EDI-560 C 12/14/2016 IN-LINE REWORK PROCEDURE FOR LIFTFAN GEARBOX BEVEL GEARS PUBLISHED

EDI-561 A 11/8/2012COMBUSTION AERO-THERMAL ENGINEERING SPECIFICATION FOR SETUP AND

USE OF AN EFFECTPUBLISHED

EDI-562 A 10/28/2013 SURFACE TREATMENT OF MAGNESIUM PUBLISHED

EDI-563 A 9/26/2018 SURFACE TREATMENT OF MAGNESIUM PUBLISHED

EDI-564 C 9/24/2013 AE2100 CLEANING USING SOLID DRY ICE PUBLISHED

EDI-565 4/26/2013 TORQUEMETER ASSEMBLY BALANCING PROCEEDUR PUBLISHED

EDI-566 5/9/2013IDENTIFICATION OF CRITICAL SAFETY ITEMS CRITICAL FEATURES FOR VENDOR

DESIGNED PAPUBLISHED

EDI-567 7/25/2016 In-Line Rework of Alloy 718 Critical Parts PUBLISHED

EDI-570 L 9/23/2020 ENGINE ASSEMBLY INSTRUCTIOHNS PUBLISHED

EDI-571 D 3/16/2021 ROLL POST MODULE BUILD INSTRUCITONS PUBLISHED

EDI-572 N 4/30/2018 ENGINE ASSEMBLY INSTRUCTIONS PUBLISHED

EDI-573 D 8/4/2017 3 Bearing Swivel Module (3BSM) Engineering Build Instructions PUBLISHED

EDI-574 C 6/15/2015 SURFACE TREATMENT OF MAGNESIUM PUBLISHED

EDI-582 7/8/2015 VISUAL INSPECTION GUIDE FOR COATED TURBIINE BLADES AND VANES PUBLISHED

EDI-586 A 7/17/2017 REWORK AND ACCEPTANCE LIMITS FOR VISUAL PUBLISHED

EDI-587 A 5/18/2017 FRONT FRAME ASSY PUBLISHED

EDI-591 7/6/2017 AE 1107C CLEANING USING SOLID DRY ICE PUBLISHED

EDI-594 A 3/15/2018 GMAD Surface Treatment of Magnesium PUBLISHED

EDI-596 B 4/29/2021 AE 2100 GMAD APPROVED IN-LINE REWORKS PUBLISHED

EDI-597 8/8/2019 PLUG REPAIR PROCEDURE FOR AIR INLET HOUSING PUBLISHED

EDI-599 8/4/2020 Vanebox Oversize Fastener Rework Procedu PUBLISHED

EDI-72 C 11/16/1953 STUD AND BUSHING COMPOUND AND TORQUE LIMITS PUBLISHED

EDI-75 C 6/29/1960 THE APPLICATION OF CORROSION RESISTANT F PUBLISHED

EDI-76 A 3/2/1954 DIFFUSER TURNING VANE INSPECTION PUBLISHED

EDI-78 5/10/1951 OIL PUMP ASSEMBLY AND TEST PUBLISHED

EDI-80 A 10/22/1954 RADIO INTERFERENCE BENCH TEST PUBLISHED

11

Specification


EDI-9 U 11/17/2015TOOTH CONTROL FOR GEARS, SPLINES AND COUPLINGS; GAGE CONTROL

AND GAGING INSTRUCTPUBLISHED

EDI593 4/26/2018 BLIND BOLT WITH 130º COUNTERSUNK HEAD PUBLISHED

EDI595 4/19/2018 CAPTIVE SCREW, INTERNAL FLOATING, INSTAL PUBLISHED

EDS-1000 C 1/27/1970 ANTI-ICING AIR VALVE ASSEMBLY PUBLISHED

EDS-1001 F 4/22/1960 RELAY BOX ASSEMBLY PUBLISHED

EDS-1012 B 12/31/1957 INSTALLATION OF POWER SECTION IN SHIPPIN PUBLISHED

EDS-1016 A 6/26/1956 INSTALLATION OF A/B IN SHIPPING CONTAINE PUBLISHED

EDS-1022 A 11/5/1956 NOZZLE ASSY, FUEL PUBLISHED

EDS-1031 5/3/1956 SPECIFICATION FOR COMMERCIAL AIRCRAFT EN PUBLISHED

EDS-1032 B 9/9/1994 CONTROL ASSEMBLY - COORDINATOR PUBLISHED

EDS-1033 E 1/17/1990 IGNITION EXCITER UNIT PUBLISHED

EDS-1038 H 12/6/1974 CONTROL ASSY, FUEL PUBLISHED

EDS-1041 E 7/10/1959 FEATHER CONTROL SOLENOID PUBLISHED

EDS-1042 H 1/19/1961 INSTALL POWER SECTION IN A CONTAINER PUBLISHED

EDS-1043 B 9/11/1957 RELAY BOX ASSEMBLY PUBLISHED

EDS-1046 A 1/22/1957 VALVE ASSEMBLY - MANIFOLD DRIP PUBLISHED

EDS-1051 C 1/7/1959 IGNITION EXCITER UNIT PUBLISHED

EDS-1054 B 9/15/1990 VALVE ASSY. - PARALLELING PUBLISHED

EDS-1055 E 7/10/1969 NTS DISARMING SOLENOID PUBLISHED

EDS-1060 G 3/3/1965 CONTROL ASSY-SPEED SENSITIVE PUBLISHED

EDS-1064 D 5/3/1990 NOZZLE ASSY, FUEL PUBLISHED

EDS-1065 C 6/7/1960 VALVE ASSY, - 3 WAY ELBOW PUBLISHED

EDS-1070 C 9/24/1958 VALVE ASSY-COMPRESSOR AIR BLEED PUBLISHED

EDS-1071 H 11/5/1979 INSTRUCTIONS FOR THE INSTALLATION OF A C PUBLISHED

EDS-1074 G 7/24/1979 PUMP ASSY, - DUAL ELEMENT FUEL PUBLISHED

EDS-1076 D 8/21/1958 TEMPERATURE ADJUSTMENT BOX ASSEMBLY PUBLISHED

EDS-1077 D 4/3/1962 PERFORMANCE SPECIFICATION OF THERMOCOUPLES PUBLISHED

EDS-1082 C 5/14/1958 ELECTRONIC TEMP. DATUM CONT. PUBLISHED

EDS-1083 C 7/13/1987 FILTER ASSY, - FUEL PUBLISHED

EDS-1084 D 9/18/1958 VALVE ASSY. - TEMP. DATUM PUBLISHED

EDS-1085 A 4/15/1957 TORQUEMETER PICK-UP ASSEMBLY PUBLISHED

12

Specification


EDS-1088 C 1/19/1961 INDICATOR - TORQUEMETER PUBLISHED

EDS-1090 A 10/11/1957 RELAY ASSY. PUBLISHED

EDS-1092 K 11/19/1979 INSTRUCTIONS FOR INSTALLATION OF ENGINE PUBLISHED

EDS-1094 H 6/30/1966 VALVE ASSY, - SPEED SENSITIVE PUBLISHED

EDS-1096 5/15/1957 BEARING INTERNAL - DIAMETRAL CLEARANCE M PUBLISHED

EDS-1097 B 1/27/1960 ACTUATOR ASSEMBLY - SERVO VALVE PUBLISHED

EDS-1098 B 8/18/1981 THRUST SENSITIVE SWITCH ASSY. PUBLISHED

EDS-1100 A 5/22/1959 CONTROL ASSY. - COORDINATOR PUBLISHED

EDS-1105 11/5/1957 FILTER FUEL DISPOSABLE PAPER PUBLISHED

EDS-1106 A 10/10/1957 HIGH RELIABILITY TESTS FOR ELECTRONIC COMPONENTS PUBLISHED

EDS-1110 G 2/16/1968 CONTROL ASSY-COORDINATOR PUBLISHED

EDS-1111 A 3/25/1958 RELAY BOX ASSEMBLY PUBLISHED

EDS-1115 C 12/4/1958 CONTROL ASSY. FUEL PUBLISHED

EDS-1119 G 12/10/1974 CONTROL ASSY - FUEL PUBLISHED

EDS-1120 C 12/9/1974 CONTROL ASSY, FUEL PUBLISHED

EDS-1121 A 7/31/1958 TRIMMER VARIABLE RESISTOR PUBLISHED

EDS-1131 B 9/11/1959 RESISTOR - PRECISION, VARIABLE, LINEAR, PUBLISHED

EDS-1132 D 2/2/1961 INDICATOR, TORQUEMETER, SENSITIVE PUBLISHED

EDS-1133 E 7/7/1959 TORQUEMETER PICK-UP ASSY PUBLISHED

EDS-1135 6/10/1959 VALVE ASSEMBLY - TEMPERATURE DATUM PUBLISHED

EDS-1136 B 9/2/1959 RELAY BOX ASSEMBLY PUBLISHED

EDS-1138 H 10/8/1964 AMPLIFIER ASSY-ELECTRONIC CONTROL, TEMP PUBLISHED

EDS-1140 A 1/6/1959 SERVO OUTPUT ASSEMBLY - PHASE DETECTOR PUBLISHED

EDS-1144 A 1/7/1959 CONTAINERS, RECTANGULAR, LIGHT WEIGHT, S PUBLISHED

EDS-1147 H 8/4/1961 INSTRUCTIONS FOR THE INSTALLATION OF THE NON-CURRENT

EDS-1148 K 9/9/1996 CONTROL ASSY-FUEL PUBLISHED

EDS-1151 J 3/6/1967 AMPLIFIER ASSY - ELECTRONIC CONTROL, TEM PUBLISHED

EDS-1152 A 10/10/1960 VALVE - CHECK FUEL PUBLISHED

EDS-1154 3/26/1959 INSTRUCTIONS FOR THE INSTALLATION OF THE PUBLISHED

EDS-1155 A 5/15/1959 INSTRUCTIONS FOR THE INSTL. OF THE REDUC PUBLISHED

EDS-1157 B 5/15/1960 VALVE ASSEMBLY - COMPRESSOR AIR BLEED PUBLISHED

EDS-1158 4/2/1959 DESIGN SPECIFICATIONS FOR COMMERCIAL SHI PUBLISHED

13

Specification


EDS-1159 A 12/8/1959 NOZZLE ASSY - WATER METHANOL INJECTION PUBLISHED

EDS-1162 6/18/1959 RELAY BOX PUBLISHED

EDS-1163 A 1/8/1960 FILTER ASSEMBLY - FUEL, DISPOSABLE PAPER PUBLISHED

EDS-1166 A 8/24/1960 TORQUEMETER PICK-UP ASSEMBLY PUBLISHED

EDS-1170 C 5/3/1990 NOZZLE ASSEMBLY - FUEL PUBLISHED

EDS-1171 D 6/16/1965 PERFORMANCE SPECIFICATION OF THERMOCOUPLE TERMINAL BLOCK PUBLISHED

EDS-1172 C 6/10/1975 THRUST SENSITIVE SWITCH ASSEMBLY PUBLISHED

EDS-1173 9/30/1959 THRUST SENSITIVE SWITCH ASSEMBLY PUBLISHED

EDS-1174 A 1/26/1961 VALVE ASSY, SOLENOID MANIFOLD DRAIN PUBLISHED

EDS-1176 A 1/3/1968 DRAWINGS, DATA AND DESIGN CHANGES FOR SOURCE ITEMS PUBLISHED

EDS-1177 A 10/18/2002 PRESSURE SWITCH ASSEMBLY PUBLISHED


EDS-1180 A 1/14/1992 VALVE ASSEMBLY - TEMPERATURE DATUM PUBLISHED

EDS-1182 B 1/17/1990 IGNITION EXCITER UNIT PUBLISHED

EDS-1186 8/11/1960 VALVE ASSY - TEMPERATURE DATUM PUBLISHED

EDS-1187 4/25/1960 INSTRUCTIONS FOR INSTALLATION OF THE ENG PUBLISHED

EDS-1189 A 9/25/1960 INSTRUCTIONS FOR INSTALLATION OF THE ENG PUBLISHED

EDS-1190 D 12/4/1964 VALVE ASSEMBLY - SPEED SENSITIVE PUBLISHED

EDS-1191 B 12/11/1974 CONTROL ASSEMBLY - FUEL PUBLISHED



EDS-1197 B 10/17/1961 REGULATOR ASSEMBLY - WATER METHANOL PUBLISHED

EDS-1199 C 4/27/2006 AIR GAP SPARK IGNITER PUBLISHED

EDS-1200 J 8/23/1966 INDICATOR ASSEMBLY-TORQUEMETER PUBLISHED

EDS-1201 A 7/13/1961 PRESSURE RATE-OF-CHANGE SWITCH ASSY PUBLISHED

EDS-1202 H 2/24/1984 PERFORMANCE SPECIFICATION OF THERMOCOUPL PUBLISHED

EDS-1205 A 7/13/1961 PHASE DETECTOR ASSY - TORQUEMETER PUBLISHED

EDS-1207 E 3/6/1967 AMPLIFIER ASSEMBLY - ELECTRONIC CONTROL, PUBLISHED

EDS-1208 A 12/11/1974 CONTROL ASSY - FUEL PUBLISHED

EDS-1210 6/5/1961 INSTRUCTIONS FOR INSTALLATION OF THE ENG PUBLISHED

EDS-1212 G 4/5/1991 INSTRUCTIONS FOR INSTALLATION OF THE RED PUBLISHED

EDS-1213 8/1/1961 INSTRUCTIONS FOR THE INSTALLATION OF THE PUBLISHED

14

Specification


EDS-1214 G 2/21/1980 INSTRUCTIONS FOR INSTALLATION OF THE ENG PUBLISHED

EDS-1216 E 7/31/2006 THERMOCOUPLE ASSEMBLIES WITH MULTIPLE PR PUBLISHED

EDS-1217 K 11/18/1998 INSTRUCTIONS FOR INSTALLATION OF ENGINE PUBLISHED

EDS-1219 C 3/1/1963 PUMP & FILTER ASSEMBLY, FUEL PUBLISHED

EDS-1220 A 9/26/1962 INSTRUCTIONS FOR INSTALLATION OF THE ENG PUBLISHED

EDS-1221 6/11/1962 EXCITER ASSEMBLY - IGNITION PUBLISHED

EDS-1222 B 7/11/1973 IGNITER ASSY - SPARK PUBLISHED

EDS-1224 9/13/1962 RESISTOR ASSY - 3 TURN - HIGH TEMPERATUR PUBLISHED

EDS-1233 2/8/1963 INDICATOR ASSY - DIFFERENTIAL PRESSURE PUBLISHED

EDS-1234 2/28/1963 GOVERNOR ASSY-POWER TURBINE PUBLISHED

EDS-1235 5/29/1963 CONTROL ASSY - COORDINATOR PUBLISHED

EDS-1237 B 2/15/1967 PUMP & FILTER ASSY, FUEL PUBLISHED

EDS-1242 1/21/1964 CONTROL ASSY-GAS PRODUCER, FUEL PUBLISHED

EDS-1243 5/5/1964 ACTUATOR ASSY - SERVO VALVE (J71-A-2) PUBLISHED

EDS-1245 C 7/11/1968 NOZZLE ASSY - FUEL PUBLISHED

EDS-1247 J 11/20/1997 CONTROL ASSY, FUEL PUBLISHED

EDS-1249 A 10/8/1964 AMPLIFIER ASSY-ELECTRONIC CONTROL TEMPER PUBLISHED

EDS-1252 3/30/1964 TIMER ASSEMBLY (J35-A-35) PUBLISHED

EDS-1253 4/21/1964 RELAY, TIMER (J35-A-35) PUBLISHED

EDS-1257 C 6/17/1974 AMPLIFIER ASSEMBLY-ELECTRONIC CONTROL, T PUBLISHED

EDS-1259 C 4/28/1982 INSTRUCTIONS FOR INSTALLATION OF THE TOR PUBLISHED

EDS-1263 8/8/1966 NOZZLE ASSY-FUEL PUBLISHED

EDS-1268 8/5/1965 VALVE ASSY,CONTROL-INTERSTAGE BLEED PUBLISHED

EDS-1269 6/3/1965 INDICATOR ASSEMBLY-TORQUEMETER (T56-A-14 PUBLISHED

EDS-1270 6/17/1965 PERFORMANCE SPECIFICATION OF THERMOCOUPL PUBLISHED

EDS-1272 B 2/13/1968 PERFORMANCE SPECIFICATION OF THERMOCOUPL PUBLISHED

EDS-1276 C 4/18/1968 INSTRUCTIONS FOR INSTALLATION OF ENGINE PUBLISHED


EDS-1278 10/27/1965 INDICATOR ASSY-TORQUEMETER PUBLISHED

EDS-1279 C 5/29/1987 INSTRUCTIONS FOR INSTALLATION OF POWER S PUBLISHED

EDS-1280 B 12/11/1974 CONTROL ASSY, FUEL PUBLISHED

EDS-1284 B 4/16/1969 CONTROL ASSY, GAS PRODUCER-FUEL PUBLISHED

15

Specification


EDS-1285 A 10/23/1967 GOVERNOR ASSY, POWER TURBINE PUBLISHED

EDS-1287 9/28/1967 GOVERNOR ASSY, POWER TURBINE PUBLISHED

EDS-1288 A 12/11/1974 CONTROL ASSY - FUEL (501-D36) PUBLISHED


EDS-1291 1/19/1967 INSTRUCTIONS FOR INSTALLATION OF A TURBI PUBLISHED

EDS-1292 12/6/1966 INDICATOR ASSY-TORQUEMETER PUBLISHED

EDS-1293 B 1/6/1969 INSTRUCTIONS FOR INSTALLATION OF ENGINE PUBLISHED

EDS-1296 C 6/1/1967 VALVE ASSY, FUEL - FLOW DIVIDER (T56-A-1 PUBLISHED

EDS-1297 3/21/1967 TURBINE UNIT SHIPPING CONTAINER INSTRUCT PUBLISHED

EDS-1298 8/17/1967 TURBINE UNIT SHIPPING CONTAINER INSTRUCT PUBLISHED

EDS-1299 C 6/4/1970 PUMP & FILTER ASSY, FUEL PUBLISHED

EDS-1300 8/19/1966 CONFIGURATION MANAGEMENT DATA REQUIREMEN PUBLISHED

EDS-1301 4/26/1967 EXCITER ASSY-IGNITION PUBLISHED

EDS-1302 M 7/15/1992 CONTROL ASSY GAS PRODUCER-FUEL PUBLISHED

EDS-1303 B 5/16/1968 GOVERNOR ASSY-POWER TURBINE PUBLISHED

EDS-1304 A 2/9/1971 CONTROL ASSY-FUEL PUBLISHED

EDS-1305 C 4/19/1978 AMPLIFIER ASSY-ELECTRONIC CONTROL TEMPER PUBLISHED

EDS-1306 Y 1/18/2008 Rolls-Royce Corporation Fixed Process and Source Control Requirements PUBLISHED

EDS-1307 1/8/1968MOLD REQUIREMENTS FOR MANUFACTURING OF SEALS, SUCH AS "O" RING

PACKINGS PUBLISHED

EDS-1308 A 7/26/1979 SHIPPING CONTAINER INSTRUCTIONS FOR TURB PUBLISHED

EDS-1311 7/3/1968 ENGINE ASSY SHIPPING CONTAINER INSTRUCTI PUBLISHED

EDS-1312 E 10/2/1998 ENGINE ASSY SHIPPING CONTAINER INSTRUCTI PUBLISHED

EDS-1313 H 6/2/1981 ENGINE ASSY SHIPPING ADAPTER & CONTAINER PUBLISHED

EDS-1315 A 11/11/1968 INITIAL TEST FOR TURBOPROP GEARBOX PUBLISHED

EDS-1316 C 12/14/1983 GOVERNOR ASSY-POWER TURBINE PUBLISHED

EDS-1317 F 9/15/1992 CONTROL ASSY, FUEL GAS PRODUCER PUBLISHED

EDS-1318 8/9/1968 CONTROL ASSY, GAS PRODUCER-FUEL PUBLISHED

EDS-1319 12/12/1968 COMBINED GOV ASSY, AIR & OIL-POWER TURBI PUBLISHED

EDS-1320 A 8/4/1971 HEATER ASSY-FUEL PUBLISHED

EDS-1321 B 4/16/1975 GOVERNOR ASSY, OIL-PROP OVERSPEED PUBLISHED

EDS-1322 C 3/3/1970 VALVE ASSY CONTROL, INTERSTAGE BLEED PUBLISHED

16

Specification


EDS-1323 C 8/30/1979 ENGINE SHIPPING CONTAINER INSTRUCTIONS PUBLISHED

EDS-1324 A 4/18/1978 AMPLIFIER ASSY-ELECTRONIC CONTROL TEMPER PUBLISHED

EDS-1325 B 4/19/1978 AMPLIFIER ASSY-ELECTRONIC CONTROL, TEMPE PUBLISHED

EDS-1326 1/17/1969 PERFORMANCE SPECIFICATION OF COMPACTED O PUBLISHED

EDS-1327 C 3/29/1976 CONTROL ASSEMBLY GAS PRODUCER-FUEL PUBLISHED

EDS-1328 5/13/1969 NOZZLE ASSY, FUEL PUBLISHED

EDS-1329 G 8/18/1992 CONTROL ASSEMBLY, GAS PRODUCER-FUEL PUBLISHED

EDS-1330 B 4/5/1991 INSTRUCTIONS FOR INSTALLATION OF THE RED PUBLISHED

EDS-1331 6/27/1969 ENGINE SHIPPING CONTAINER INSTRUCTIONS PUBLISHED

EDS-1333 B 1/17/1990 EXCITER ASSY-IGNITION PUBLISHED

EDS-1335 F 8/30/1979 ENGINE SHIPPING CONTAINER INSTRUCTIONS PUBLISHED

EDS-1336 2/27/1970 CONTAINER ASSY, SHIPPING-TURBINE H.P. & PUBLISHED

EDS-1337 B 1/6/1989 ENGINE ASSY SHIPPING CONTAINER INSTRUCTI PUBLISHED

EDS-1338 7/14/1971 PACKAGE ASSY, SHIPPING-TURBINE HP & LP R PUBLISHED

EDS-1339 4/27/1970 CONTAINER ASSY, SHIPPING - GEARBOX, H.S. PUBLISHED

EDS-1340 7/14/1971 CONTAINER ASSY, ROTOR & VANE ASSY-LP/IP PUBLISHED

EDS-1341 F 1/17/1975 CONTROL ASSY, GAS PRODUCER FUEL PUBLISHED

EDS-1342 G 6/14/1977 GOVERNOR ASSY, POWER TURBINE PUBLISHED

EDS-1346 D 1/25/1993 VALVE ASSY, COMPR BLEED PUBLISHED

EDS-1347 E 9/25/1978 CONTROL ASSY-GAS PRODUCER-FUEL PUBLISHED

EDS-1348 A 2/13/1974 COMBINED GOV ASSY, AIR & OIL-PT & PROP PUBLISHED

EDS-1349 A 7/19/1976 PUMP & FILTER ASSY, FUEL PUBLISHED

EDS-1350 D 7/25/1979 CONTROL ASSY, TURB TEMP AND SPEED (GP) PUBLISHED

EDS-1351 C 4/19/1978 AMPLIFIER ASSY, ELECTRONIC CONTROL, TEMP PUBLISHED

EDS-1352 4/30/1971 ENG SHIPPING CONTAINER INSTRUCTIONS PUBLISHED

EDS-1353 F 9/25/1978 CONTROL ASSY, GP FUEL PUBLISHED

EDS-1354 D 7/19/1976 GOVERNOR ASSY, FUEL-PT PUBLISHED

EDS-1355 D 7/24/1979 CONTROL ASSY, TURB TEMP & SPEED (GP) PUBLISHED

EDS-1356 5/10/1971 EXCITER ASSY, IGNITION PUBLISHED

EDS-1357 H 9/9/1996 CONTROL ASSY FUEL PUBLISHED

EDS-1358 E 8/31/2005 BEARING SUPPLIER ENGINEERING DATA & CHANGE REQUIREMENTS PUBLISHED

EDS-1501 6/11/1971 PERF SPEC OF FUEL RESIST COMPACTED OXIDE PUBLISHED

17

Specification


EDS-1502 B 9/5/1975 ACTUATOR, AUTO IGNITION PUBLISHED

EDS-1503 A 4/19/1976 PUMP AND FILTER ASSY, FUEL PUBLISHED

EDS-1504 B 1/8/2004 SUPPLIER REQMENTS FOR APPROVED SOURCE PARTS PUBLISHED

EDS-1505 F 10/30/1978 CONTROL ASSY, TURB TEMP & SPEED PUBLISHED

EDS-1510 1/27/1972 AUTOMATIC REIGNITION CONTROL ELECTRONIC PUBLISHED

EDS-1511 11/12/1971 AMPLIFIER ASSY, TOP TEMPERATURE LIMITER- PUBLISHED

EDS-1512 F 6/6/1996 ENG. ASSY. SHIPPING CONTAINER INSTRUCTIO PUBLISHED

EDS-1513 1/27/1972 AUTOMATIC REIGNITION CONTROL ELECTRONIC PUBLISHED

EDS-1514 E 1/10/1979 CONTROL ASSY, TURBINE TEMP. & SPEED PUBLISHED

EDS-1515 A 1/26/1976 AUTOMATIC REIGNITION CONTROL, ELECTRONIC PUBLISHED

EDS-1516 11/30/1971 PRESSURIZING VALVE PUBLISHED

EDS-1518 E 7/11/1975 EXCITER ASSY, IGNITION PUBLISHED

EDS-1519 A 1/5/1973 IGNITER ASSY, SPARK PUBLISHED

EDS-1520 C 9/26/1978 GOVERNOR ACTUATOR 501K17 PUBLISHED

EDS-1521 B 2/13/1973 CONTROL ASSY. GAS PROD. FUEL PUBLISHED

EDS-1522 A 12/19/1972 HYDRAULIC CYLINDER, VARIABLE GEOMETRY PUBLISHED

EDS-1523 3/13/1973 TORQUEMETER PICKUP ASSEMBLY PUBLISHED

EDS-1524 D 10/30/1978 CONTROL ASSY, TURBINE TEMP. AND SPEED PUBLISHED

EDS-1525 D 10/17/1973 CONTROL ASSY, TURB. TEMP. & SPEED PUBLISHED

EDS-1526 A 1/8/1974 INJECTOR ASSY - FUEL/AIR PUBLISHED

EDS-1527 3/28/1972 REGULATOR ASSY, AIR FLOW ENGINE PUBLISHED

EDS-1528 5/8/1972 LIQUID FUEL VALVE PUBLISHED

EDS-1529 8/11/1972 AUTOMATIC, REIGNITION CONTROL, ELECTRONI PUBLISHED

EDS-1531 6/8/1972 PANEL ASSY, GOVERNOR CONTROL 501K-17 PUBLISHED

EDS-1532 5/9/1972 SENSOR, CDP - TEMP. BIASED PUBLISHED

EDS-1535 8/16/1972 CONTROL ASSY - ACCELERATION DUMP 12V PUBLISHED

EDS-1536 10/10/1972 CONTROL ASSY - ACCELERATION DUMP 24V PUBLISHED

EDS-1537 A 12/18/1973 REGULATOR ASSY, AIR FLOW ENG. PUBLISHED

EDS-1539 B 7/30/1976 CONTROL ASM - ELECTRONIC PUBLISHED

EDS-1540 7/31/1975 CONTROL ASSY-ELECTRONIC-GEN SET PUBLISHED

EDS-1541 8/13/1975 VALVE ASM, FUEL METERING-GEN SET (WGCO) PUBLISHED

EDS-1543 7/9/1974 SENSOR ASM-THROTTLE PUBLISHED

18

Specification


EDS-1544 2/1/1976 ELECTRONIC CONTROL ASM-WOODWARD PUBLISHED

EDS-1545 8/25/1976 CLUTCH VALVE ASSY (WOODWARD GOVERNOR CO. PUBLISHED

EDS-1546 10/9/1975 FUEL VALVE ASM-WOODWARD PUBLISHED

EDS-1548 1/5/1976 THROTTLE SENSOR ASM-WOODWARD PUBLISHED

EDS-1549 A 7/18/1988 FUEL INJECTOR ASSEMBLY PUBLISHED

EDS-1550 A 3/22/1974 LIQUID FUEL VALVE PUBLISHED

EDS-1551 B 10/26/1973 CONTROL ASSY, TURBINE TEMPERATURE AND SP PUBLISHED

EDS-1552 H 4/18/1975 CONTROL ASSY, GAS PRODUCER FUEL PUBLISHED

EDS-1553 B 5/21/1974 SENSOR ASSY COMPRESSOR INLET TEMPERATURE PUBLISHED

EDS-1554 D 7/11/1975 MAGNETO POWER SUPPLY PUBLISHED

EDS-1555 B 10/25/1984 ELEMENT FILTER, PRIMARY OIL PUBLISHED

EDS-1557 B 10/26/1973 CONTROL ASSY, TURBINE TEMPERATURE & SPEE PUBLISHED

EDS-1559 11/12/1973 FREQUENCY CONVERTER PUBLISHED

EDS-1560 A 10/16/1973 CONTROL ASSY, TURBINE TEMP & SPEED PUBLISHED

EDS-1561 D 3/27/1974 VALVE, ANTI-ICING AIR PUBLISHED

EDS-1562 4/26/1973 ELECTRONIC ROAD SPEED GOVERNOR PUBLISHED

EDS-1563 B 4/17/1974 PUMP ASSY, FUEL PUBLISHED

EDS-1564 A 4/18/1974 FUEL FILTER, LP PUBLISHED

EDS-1565 6/26/1973 CIRCUIT BOARD ASSY, COMMON POWER SUPPLY PUBLISHED

EDS-1566 6/26/1973 CIRCUIT BOARD ASSY, ISOLATED POWER SUPPL PUBLISHED

EDS-1567 6/26/1973 CIRCUIT BOARD ASSY, FREQUENCY CONVERTER PUBLISHED

EDS-1568 B 3/3/1988 CIRCUIT BOARD ASSY, TEMPERATURE AMPLIFIE PUBLISHED

EDS-1569 6/26/1973 CIRCUIT BOARD ASSY, COMPARATOR PUBLISHED

EDS-1570 A 8/17/1973 ACTUATOR, HYD-VARIABLE COMPR GEOMETRY PUBLISHED

EDS-1571 C 10/10/1984 CONTROL ASSY, GAS PRODUCER-FUEL PUBLISHED

EDS-1572 B 7/24/1975 ENGINE SHIPPING CONTAINER INSTRUCTIONS PUBLISHED

EDS-1573 8/24/1973 CONTROL ASSY, GAS PRODUCER & SENSOR - CI PUBLISHED

EDS-1574 5/10/1973 PUMP & FUEL CONTROL ASSY PUBLISHED

EDS-1575 B 1/21/1977 SWITCH, DIFFERENTIAL PRESSURE PUBLISHED

EDS-1576 B 10/17/1979 INDICATOR ASSY, FILTER MAINT PUBLISHED

EDS-1577 B 10/30/1978 CONTROL ASSY, TURB TEMP & SPEED PUBLISHED

EDS-1578 B 10/30/1978 CONTROL ASSY, TURB TEMP & SPEED PUBLISHED

19

Specification



EDS-1581 10/2/1973 CONTROL ASSY, TURB TEMP & SPEED PUBLISHED

EDS-1582 R 3/16/2016 CONTROL ASSY, GAS PRODUCER-FUEL PUBLISHED

EDS-1583 7/9/1974 VALVE ASM, FUEL METERING PUBLISHED

EDS-1584 7/9/1974 CLUTCH VALVE ASSEMBLY PUBLISHED

EDS-1585 B 3/13/1975 PUMP ASSY, FUEL PUBLISHED


EDS-1587 D 4/30/2003 GOVERNOR ASSY, FUEL-POWER TURBINE PUBLISHED

EDS-1588 N 8/18/1992 CONTROL ASSY, GAS PRODUCER-FUEL PUBLISHED

EDS-1589 12/13/1973 AMPLIFIER ASSY, TOP TEMPERATURE LIMITER PUBLISHED

EDS-1590 A 7/12/1974 CONTROL ASSEMBLY, POWER MANAGEMENT PUBLISHED

EDS-1591 B 11/20/1974 CONTROL ASSEMBLY, ELECTRONIC, ENGINE PUBLISHED


EDS-1595 3/25/1974 GOVERNOR ASSY, FUEL POWER TURBINE PUBLISHED

EDS-1596 B 8/22/1975 ELECTRONIC GAS TURBINE SYSTEM-GENERATOR PUBLISHED

EDS-1597 10/25/1974 ELECTRONIC GAS TURBINE CONTROL SYSTEM- D PUBLISHED

EDS-1598 2/2/1977 ELECTRONIC GAS TURBINE CONTROL SYST.-WOO PUBLISHED

EDS-1599 B 9/27/1974 PUMP ASSEMBLY, FUEL PUBLISHED

EDS-1600 1/30/1974 AMPLIFIER ASSY, TOP TEMPERATURE LIMITER PUBLISHED



EDS-1603 C 11/3/1975 PUMP ASSEMBLY, FUEL PUBLISHED

EDS-1604 7/5/1974 EXCITER ASSY.-IGNITION, DUAL PUBLISHED

EDS-1605 B 6/2/1978 PUMP ASSEMBLY, FUEL PUBLISHED

EDS-1606 3/20/1974 FUEL FILTER ASSY, L.P. PUBLISHED

EDS-1607 F 7/12/1978 TORQUEMETER PICKUP ASSEMBLY PUBLISHED

EDS-1608 4/8/1974 CONTROL ASSY, TURBINE TEMPERATURE AND SP PUBLISHED

EDS-1609 A 7/3/1974 CIRCUIT BOARD ASSEMBLY, TEMPERATURE AMPL PUBLISHED

EDS-1610 E 8/31/1979 CONTROL ASSY, TURBINE TEMPERATURE AND SP PUBLISHED

EDS-1611 P 9/15/1992 CONTROL ASSEMBLY-GAS PRODUCER-FUEL PUBLISHED


EDS-1613 C 8/31/1979 CONTROL ASSY, TURBINE TEMPERATURE AND SP PUBLISHED

20

Specification


EDS-1614 5/3/1974 GOVERNOR ACTUATOR PUBLISHED

EDS-1615 3/22/1974 TUBE ASSY, AIR (FLEXIBLE & INSULATED) PUBLISHED

EDS-1616 3/22/1974 TUBE ASSY, AIR (FLEXIBLE) PUBLISHED

EDS-1617 1/30/1975 CONTROL ASSY, ELECTRONIC TEMPERATURE DAT PUBLISHED


EDS-1619 J 7/22/1983 CONTROL ASSY-GAS PRODUCER FUEL PUBLISHED

EDS-1620 6/14/1974 CONTROL ASSY, HYDROMECHANICAL FUEL PUBLISHED

EDS-1621 12/20/1974 COOLER ASSY, FUEL COOLED OIL PUBLISHED

EDS-1622 7/9/1974 PRESSURE TRANSDUCER-IGNITION CONTROL PUBLISHED

EDS-1623 A 8/1/1975 IGNITION EXCITER UNIT PUBLISHED

EDS-1624 B 4/19/1999 NOZZLE ASSEMBLY - FUEL PUBLISHED

EDS-1625 A 8/22/1975 GENERATOR SET CONTROL SYSTEM-PM PROTOTYP PUBLISHED

EDS-1626 1/5/1976 ELECTRONIC CONTROL ASSY-GEN. SET PUBLISHED

EDS-1627 9/4/1974 COST STATUS REPORTING PUBLISHED

EDS-1628 5/6/1975 CONTROL ASSY, ELECTRONIC, ENGINE PUBLISHED

EDS-1629 D 12/8/1975 N2 OVERSPEED CONTROL PUBLISHED

EDS-1630 A 6/21/1977 AMPLIFIER ASSY, TOP TEMPERATURE LIMITER PUBLISHED

EDS-1631 A 6/21/1977 AMPLIFIER ASSY, TOP TEMPERATURE LIMITER PUBLISHED

EDS-1633 4/9/1975 N2 OVERSPEED CONTROL PUBLISHED

EDS-1634 D 3/12/1993 STAGNATION SENSING CONTROL PUBLISHED

EDS-1635 B 1/16/1976 CONTROL ASSEMBLY-GAS PRODUCER-FUEL PUBLISHED

EDS-1636 A 1/16/1976 CONTROL ASSEMBLY, FUEL-POWER TURBINE PUBLISHED


EDS-1638 3/24/1976 COMPRESSOR BLEED VALVE ASSY PUBLISHED

EDS-1639 D 8/29/1979 ENGINE ASSY SHIPPING CONTAINER INSTRUCTI PUBLISHED

EDS-1640 C 6/21/1980 INJECTOR ASSY-FUEL/AIR PUBLISHED

EDS-1641 A 6/21/1977 AMPLIFIER ASSY., TOP TEMPERATURE LIMITER PUBLISHED

EDS-1642 B 11/3/1978 CONTROL ASSY, TURBINE TEMPERATURE AND SP PUBLISHED

EDS-1643 A 1/26/1976 AUTOMATIC REIGNITION CONTROL, ELECTRONIC PUBLISHED

EDS-1644 B 6/13/1977 E-ONE OIL MONITOR PUBLISHED

EDS-1645 9/22/1975 RELAY BOX ASSY, CONTROL PUBLISHED

EDS-1646 B 9/20/1977 TAPE MAGAZINE UNIT PUBLISHED

21

Specification


EDS-1647 9/22/1975 PUMP ASSY, FUEL PUBLISHED

EDS-1648 3/24/1976 VALVE ASSY COMPRESSOR BLEED PUBLISHED

EDS-1649 B 5/31/1977 ANALYZER ASSEMBLY, ENGINE PUBLISHED

EDS-1650 10/17/1975 NOZZLE ASSEMBLY-FUEL PUBLISHED

EDS-1651 B 11/4/1976 RESISTOR, TEMPERATURE COMPENSATING PUBLISHED

EDS-1652 1/1/1976 FUEL FILTER ASSY., L.P. PUBLISHED

EDS-1653 J 12/5/1985 CONTROL ASSY-GAS PRODUCER-FUEL PUBLISHED

EDS-1654 4/14/1976 GOVERNOR ASSY, FUEL POWER TURB PUBLISHED

EDS-1656 A 5/6/1976 N2 OVERSPEED CONTROL PUBLISHED

EDS-1657 A 11/3/1978 CONTROL ASSEMBLY, TURBINE TEMPERATURE & PUBLISHED

EDS-1658 B 5/6/1976 N2 OVERSPEED CONTROL PUBLISHED

EDS-1659 B 7/16/1986 GOVERNOR ASSY, FUEL-POWER TURBINE PUBLISHED

EDS-1660 B 7/16/1976 STAGNATION SENSING CONTROL PUBLISHED

EDS-1661 11/21/1975 CLUTCH VALVE ASSEMBLY (DELCO/DED) PUBLISHED

EDS-1662 A 4/10/2008 VALVE ASSY, OVERSPEED, SOLENOID PUBLISHED

EDS-1664 A 4/10/2008 VALVE ASSEMBLY, SOLENOID ANTI-ICING PUBLISHED

EDS-1665 C 2/6/2015 VALVE ASSY, ANTI-ICING AIR PUBLISHED

EDS-1669 B 7/16/1986 GOVERNOR ASSY, FUEL-POWER TURB PUBLISHED

EDS-1670 H 12/13/1982 CONTROL ASSY, N2 OVERSPEED PUBLISHED

EDS-1672 6/1/1976 GENERATOR SET CONTROL SYSTEM-PM PROTOTYP PUBLISHED


EDS-1674 C 10/23/1990 CONTROL ASSEMBLY-FUEL PUBLISHED

EDS-1675 G 12/13/1982 CONTROL ASSEMBLY-N2 OVERSPEED PUBLISHED

EDS-1676 2/10/1977 CONTROL ASSY-TEMP 501 PUBLISHED

EDS-1677 2/10/1977 CONTROL ASSEMBLY TEMP PUBLISHED

EDS-1678 9/15/1976 T6 OVERTEMP SHUTDOWN CONTROL PUBLISHED

EDS-1679 T 1/15/1993 CONTROL ASSY-GAS PRODUCER-FUEL PUBLISHED

EDS-1680 E 2/25/1980 ELECTRONIC CONTROL -501-KC PUBLISHED

EDS-1681 12/23/1976 TAPE MAGAZINE UNIT TF41 PUBLISHED

EDS-1682 C 11/16/2001 VALVE, COMPRESSOR BLEED, 5TH STG ELECTRI PUBLISHED

EDS-1683 C 11/16/2001 VALVE, COMPRESSOR BLEED,10TH STG ELECTRI PUBLISHED

EDS-1684 A 8/13/1977 VALVE, GAS FUEL-501K PUBLISHED

22

Specification


EDS-1685 E 2/6/1998 LIQUID FUEL VALVE-501K PUBLISHED

EDS-1686 A 9/22/1977 CLUTCH VALVE ASSY PUBLISHED

EDS-1687 F 11/7/1984 FUEL VALVE ASSY-404-4 PUBLISHED

EDS-1689 9/26/1977 PUMP ASSY, FUEL (250C30 INITIALLY) PUBLISHED

EDS-1690 A 1/30/1980 OVERRIDE VALVE ASSY, AIRFLOW REGULATOR PUBLISHED

EDS-1691 A 5/10/1978 ELECTRONIC CONTROL PUBLISHED

EDS-1692 4/11/1977 GOVERNOR ASSY - POWER TURBINE PUBLISHED

EDS-1694 11/29/1977 ELECTRONIC CONTROL ASSY (404/505 GEN. SE PUBLISHED

EDS-1695 9/22/1977 ELECTRONIC CONTROL ASSY 404/505-4 VEHICU PUBLISHED

EDS-1696 3/3/1978 PUMP ASSY, FUEL PUBLISHED


EDS-1698 6/17/1977 CIRCUIT BOARD ASSY, TEMP AMPLIFIER PUBLISHED

EDS-1699 A 11/4/1978 ELECTRONIC CONTROL MODULES PUBLISHED

EDS-1700 4/13/1978 ELECTRONIC CONTROL PUBLISHED

EDS-1702 C 2/6/1998 GAS FUEL VALVE ASSY PUBLISHED

EDS-1703 G 6/28/2013 LIQUID FUEL VALVE ASSY (NON EXPLOSION PR PUBLISHED

EDS-1704 A 2/7/1984 GAS FUEL VALVE ASSY PUBLISHED

EDS-1706 11/22/1977 NOZZLE ASSY-FUEL PUBLISHED

EDS-1707 11/14/1977 NOZZLE ASSY FUEL PUBLISHED

EDS-1708 9/21/1988 FUEL INJECTOR ASSEMBLY PUBLISHED

EDS-1710 A 3/16/1981 FUEL DIVERTER & SHUTOFF VALVE PUBLISHED

EDS-1711 11/10/1977 GOVERNOR ASSY, FUEL-POWER TURBINE PUBLISHED

EDS-1712 A 4/19/1999 NOZZLE ASSY - FUEL PUBLISHED

EDS-1713 2/1/1978 INITIAL TEST FOR TURBO PROP REDUCTION GE PUBLISHED

EDS-1714 B 2/13/1984 VALVE, GAS FUEL PUBLISHED

EDS-1715 C 8/31/1981 VALVE ASSY, COMPRESSOR BLEED PUBLISHED

EDS-1716 E 2/17/1998 VALVE ASSY, COMPRESSOR BLEED PUBLISHED

EDS-1717 B 4/17/1980 AMPLIFIER ASSY, TOP TEMPERATURE LIMITER PUBLISHED

EDS-1718 D 9/27/1979 ELECTRONIC CONTROL ASSY PUBLISHED

EDS-1719 10/16/1978 VALVE ASSY, ANTI-ICING AIR PUBLISHED

EDS-1720 4/18/1978 VALVE ASSY, COMPRESSOR BLEED PUBLISHED

EDS-1721 F 1/16/2001 ENG. SHIPPING CONTAINER ASSY INSTRUCTION PUBLISHED

23

Specification


EDS-1722 A 2/13/1984 ELECTRIC GAS FUEL VALVE PUBLISHED

EDS-1729 3/12/1979 T6 OVER TEMPERATURE SHUTDOWN CONTROL - PUBLISHED

EDS-1732 12/22/1978 GOVERNOR ACTUATOR (501KB) PUBLISHED

EDS-1733 A 1/10/1979 CONTROL ASSY, TURB TEMP & SPEED PUBLISHED

EDS-1734 11/8/1978 CONTROL ASSY, TURBINE TEMP & SPEED PUBLISHED

EDS-1735 B 9/1/1981 CONTROL ASSY, TORQUEMETER 570-K PUBLISHED

EDS-1736 A 4/2/1992 INSTRUCTIONS FOR INSTALLATION OF AN ENGI PUBLISHED

EDS-1739 A 1/30/1980 ENGINE ASSY SHIPPING CONTAINER INSTRUCTI PUBLISHED

EDS-1741 A 4/14/1981 THERMOCOUPLE MONITOR ASSY PUBLISHED

EDS-1742 2/20/1979 GOVERNOR ACTUATOR - 501KB PUBLISHED

EDS-1744 3/16/1979 T6 OVERTEMPERATURE SHUTDOWN CONTROL-GEN PUBLISHED

EDS-1745 8/7/1979 CONTROL ASSY - TORQUE SHARING PUBLISHED

EDS-1746 A 8/23/1979 CONTROL ASSY, TURBINE TEMPERATURE & SPEE PUBLISHED

EDS-1747 A 8/28/1980 LIQUID FUEL VALVE PUBLISHED

EDS-1748 3/13/1981 CVX-650 TRANSMISSION CONTROL SYSTEM SPEC PUBLISHED

EDS-1750 A 5/14/1981 ELECTRONIC CONTROL ASSY PUBLISHED

EDS-1751 A 2/13/1984 VALVE ASSY. HIGH TEMP, GAS FUEL ELECTRIC PUBLISHED

EDS-1752 7/29/1981 RAM ASSEMBLY PUBLISHED

EDS-1754 7/31/1981 AIRFLOW REGULATOR MODIFICATION WITH ELEC PUBLISHED

EDS-1756 D 2/22/1983 SWITCHING VALVE ASSY AIRFLOW REGULATOR PUBLISHED

EDS-1757 A 2/16/1981 ELECTRIC SERVO VALVE ASSY PUBLISHED

EDS-1758 8/25/1980 CONTROL ASSY - FUEL PUBLISHED

EDS-1759 4/7/1980 CONTROL ASSY, TURBINE TEMPERATURE & SPEE PUBLISHED

EDS-1760 K 11/19/1994 CONTROL ASSY, - GAS PRODUCER - FUEL PUBLISHED

EDS-1761 4/16/1980 AMPLIFIER ASSEMBLY-ELECTRONIC CONTROL, TEMPERATURE PUBLISHED

EDS-1762 3/12/1980 GOVERNOR ACTUATOR (501-K17) PUBLISHED

EDS-1765 A 5/29/1986 INSTALLATION INSTRUCTIONS-POWER TURBINE PUBLISHED

EDS-1767 C 11/15/1983 INSTALLATION INSTRUCTIONS OF AN ENGINE A PUBLISHED

EDS-1768 B 12/1/1981 INSTALLATION INSTRUCTIONS OF A GENERATOR PUBLISHED

EDS-1770 8/25/1980 CONTROL ASSY. ELECT. TEMP. DATUM PUBLISHED

EDS-1772 1/21/1981 12 VDC ELECTRIC MOTOR DRIVEN FUEL PUMP PUBLISHED


24

Specification


EDS-1783 8/18/1980 CONTROL ASSY - FUEL PUBLISHED

EDS-1784 10/18/1983 CRYSTALS, QUARTZ LOAD RESONATER PUBLISHED

EDS-1786 1/21/1981 POWER TRANSFER CLUTCH SERVO CONTROL VALV PUBLISHED

EDS-1787 A 4/30/1984 VARIABLE GEOMETRY ACTUATOR, IGV AND COMB PUBLISHED

EDS-1789 11/15/1980 FUEL METERING CONTROL PUBLISHED

EDS-1790 1/30/1981 PACKAGING & MARKING OF ELECTROLYTE (SULF PUBLISHED

EDS-1791 3/3/1982 THERMOCOUPLE MONITOR AND SPREAD COMPUTER PUBLISHED

EDS-1792 C 10/22/1982 ELECTRONIC MONITOR REGULATOR ASSY PUBLISHED

EDS-1793 B 10/22/1982 VOLTAGE MONITOR ASSY PUBLISHED

EDS-1796 B 7/18/1990 CONTROL ASSY. - GAS PRODUCER - FUEL PUBLISHED

EDS-1798 11/8/1982 ENGINE ASSY SHIPPING CONTAINER INSTRUCTI PUBLISHED

EDS-1799 A 3/6/1987 GOVERNOR ACTUATOR PUBLISHED

EDS-1802 6/5/1981 CONTROL ASSEMBLY, TURBINE TEMP. & SPEED PUBLISHED

EDS-1803 A 7/30/1984 CONTROL ASSEMBLY, TURBINE TEMP & SPEED PUBLISHED

EDS-1804 3/3/1982 THERMOCOUPLE MONITOR AND SPREAD COMPUTER PUBLISHED

EDS-1805 2/5/1982 ELECTRONIC CONTROL MODULE, TWO SHAFT FUE PUBLISHED

EDS-1806 2/5/1982 ELECTRONIC CONTROL MODULE,TEMPERATURE MO PUBLISHED

EDS-1808 12/7/1981 CLUTCH VALVE ASSEMBLY PUBLISHED


EDS-1812 10/19/1981 THRUST SENSITIVE SWITCH ASSEMBLY PUBLISHED

EDS-1814 4/19/1982 ELECTRONIC CONTROL MODULE, TWO SHAFT FUE PUBLISHED

EDS-1815 12/23/1981 VALVE ASSY, FUEL AUGMENTATION PUBLISHED

EDS-1816 A 3/2/1984 REGULATOR ASSEMBLY-WATER PUBLISHED

EDS-1817 3/16/1982 CONTROL ASSEMBLY TURB TEMP AND SPEED PUBLISHED



EDS-1821 2/3/1983 INSTRUCTIONS FOR DROPPED CONTAINERS WITH PUBLISHED

EDS-1822 10/14/1982 IGNITER ASY-SPARK PUBLISHED

EDS-1823 10/14/1982 ELECTRONIC CONTROL MODULE, TEMPERATURE M PUBLISHED

EDS-1824 B 12/14/1983 ELECTRONIC CONTROL MODULE, SINGLE SHAFT PUBLISHED

EDS-1825 A 12/14/1983 ELECTRONIC CONTROL ASSY, (TOT SYSTEM), S PUBLISHED

EDS-1826 12/22/1982 SENSOR ASSEMBLY, CIT PUBLISHED

25

Specification


EDS-1827 9/10/1982 ELECTRONIC CONTROL MODULE, GP SPEED MONI PUBLISHED

EDS-1828 A 3/16/1983 ENGINE ASSY SHIPPING CONTAINER INSTRUCTI PUBLISHED

EDS-1829 4/12/1983 ALTERNATOR ASSEMBLY SHIPPING CONTAINER I PUBLISHED

EDS-1830 A 7/25/1983 GOVERNOR CONTROL BOX ASSY. PUBLISHED

EDS-1832 A 2/14/1985 COOLER ASSEMBLY, LUBRICATING OIL, SYNTHE PUBLISHED

EDS-1834 12/16/1982 CONTROL ASSEMBLY, TURBINE TEMPERATURE AN PUBLISHED

EDS-1835 D 10/25/1984 CONTROL ASSY, N2 OVERSPEED PUBLISHED

EDS-1836 D 10/25/1984 CONTROL ASSY, N2 OVERSPEED PUBLISHED

EDS-1838 B 7/9/1991 ACCUMULATOR, FUEL SYSTEM PUBLISHED

EDS-1839 5/10/1983 AMPLIFIER ASSEMBLY-ELECTRONIC CONTROL, T PUBLISHED

EDS-1840 A 3/25/1985 TURBINE UNIT SHIPPING CONTAINER INSTRUCT PUBLISHED

EDS-1842 9/27/1983 ELECT CONTROL MODEULE, TEMP.MONITOR (MGT PUBLISHED

EDS-1843 B 9/14/2017 SENSOR ASSEMBLY, CIT PUBLISHED

EDS-1845 A 10/16/1984 CONTROL ASSY, TEMPERATURE AND SPEED PUBLISHED

EDS-1847 F 1/20/1993 CONTROL ASSY, GAS PRODUCER-FUEL PUBLISHED

EDS-1852 C 6/12/1986 CONTROL ASSY, N2 OVERSPEED PUBLISHED

EDS-1853 9/9/1983 AMPLIFIER ASSY, - ELECTRONIC CONTROL, TE PUBLISHED

EDS-1854 10/4/1983 ELECTRONIC MODULE ASSEMBLY, TWO SHAFT EN PUBLISHED

EDS-1856 A 6/7/1984 GOVERNOR CONTROL BOX ASSY PUBLISHED

EDS-1857 5/9/1984 ELECTRONIC CONTROL ASSEMBLY PUBLISHED

EDS-1858 5/24/1984 MANIFOLD ASSEMBLY, CLUTCH MODULATOR PUBLISHED

EDS-1859 5/24/1984 VALVE AND MANIFOLD ASSEMBLY, COOLING PUBLISHED

EDS-1860 5/24/1984 VALVE AND MANIFOLD ASSEMBLY, SPLINE LOCK PUBLISHED

EDS-1861 6/4/1984 VALVE AND MANIFOLD ASSEMBLY, CLUTCH SELE PUBLISHED

EDS-1862 A 5/11/1984 GOVERNOR ACTUATOR PUBLISHED

EDS-1863 3/9/1984 GAS FUEL VALVE-ELECTRONIC, METERING PUBLISHED

EDS-1864 9/28/1984 COMPENSATOR TRANSIENT, MEASURED GAS TEMP PUBLISHED

EDS-1865 6/8/1988 PUMP ASSEMBLY, FUEL PUBLISHED

EDS-1866 5/24/1984 VALVE CLUTCH ACTUATOR PUBLISHED

EDS-1867 D 9/8/1992 CONTROL ASSEMBLY-FUEL-GAS PRODUCER PUBLISHED

EDS-1869 3/21/1984 CONTROL ASSY, TORQUEMETER PUBLISHED

EDS-1870 B 5/19/1987 RESISTOR-PRECISION, VARIABLE, LINEAR, CO PUBLISHED

26

Specification


EDS-1871 C 2/1/1991 CONTROL ASSEMBLY-COORDINATOR PUBLISHED

EDS-1874 B 2/18/1985 SPEED TEMPERATURE CONTROL BOX ASSEMBLY PUBLISHED

EDS-1875 D 2/1/1989 CONTROL ASSY, ELECTRONIC TEMPERATURE DAT PUBLISHED

EDS-1876 E 7/15/1993 CONTROL ASSY, ELECTRONIC TEMPERATURE DAT PUBLISHED

EDS-1877 5/24/1984 VALVE AND MANIFOLD ASSEMBLY, CLUTCH SELE PUBLISHED

EDS-1879 G 11/13/1992 ELECTRONIC CONTROL PUBLISHED

EDS-1880 6/22/1984 CONTROL ASSY, N2 OVERSPEED PUBLISHED

EDS-1881 7/2/1984 CONTROL ASSY, N2 OVERSPEED PUBLISHED

EDS-1882 7/27/1984 CONTROL ASSEMBLY,TURBINE TEMPERATURE AND PUBLISHED

EDS-1883 D 4/2/1992 PICKUP ASSEMBLY-TORQUEMETER PUBLISHED

EDS-1884 B 3/18/1985 RSRA X-WING CLUTCH CONTROL SPECIFICATION PUBLISHED

EDS-1885 9/13/1984 ENGINE MONITORING UNIT PUBLISHED

EDS-1886 B 3/16/1989 DUAL CHECK VALVE ASSEMBLY PUBLISHED


EDS-1890 M 1/19/1993 CONTROL ASSEMBLY-GAS PRODUCER-FUEL PUBLISHED

EDS-1891 10/10/1984 SURGE DETECTOR ASSY PUBLISHED

EDS-1892 1/31/1985 GOVERNOR CONTROL BOX ASSY (SINGLE FUEL) PUBLISHED

EDS-1893 A 6/3/1985 LIQUID FUEL VALVE AND ACTUATOR ASSY/DUAL PUBLISHED

EDS-1894 A 6/3/1985 GASEOUS FUEL VALVE AND ACTUATOR ASSY PUBLISHED

EDS-1895 A 6/3/1985 LIQUID FUEL VALVE AND ACTUATOR ASSY/SING PUBLISHED

EDS-1896 1/4/1985 INSTRUCTIONS FOR INSTALLATION OF CLUTCH PUBLISHED

EDS-1897 D 6/22/1990 FUEL PUMP, FUEL HEATER AND FILTER ASSEMB PUBLISHED

EDS-1898 2/27/1985 GOVERNOR CONTROL BOX ASSY (DUAL FUEL/SIN PUBLISHED

EDS-1899 4/19/1985 RSRA X-WING CLUTCH CONTROL SPECIFICATION PUBLISHED

EDS-1900 3/13/1985 CONTROL ASSEMBLY-GAS PRODUCER--FUEL PUBLISHED

EDS-1904 B 5/5/1988 FULL AUTHORITY DIGITAL ELECTRONIC CONTRO PUBLISHED

EDS-1906 G 6/26/1997 ENGINE ANALYZER UNIT PUBLISHED

EDS-1907 E 1/13/1992 GOVERNOR CONTROL BOX ASSY, SINGLE SHAFT PUBLISHED

EDS-1908 B 7/20/1988 ANALOG BACKUP ELECTRONIC CONTROL PUBLISHED

EDS-1913 J 7/28/1992 MGT SPEED TEMPERATURE CONTROL BOX ASSEMB PUBLISHED


EDS-1915 10/31/1985 CONTROL ASSEMBLY, TURBINE TEMPERATURE & PUBLISHED

27

Specification


EDS-1916 A 11/17/1985 CONTROL ASSEMBLY, ELECTRONIC, ENGINE PUBLISHED

EDS-1917 A 9/15/1986 SPEED TEMPERATURE CONTROL BOX ASSEMBLY/T PUBLISHED

EDS-1918 5/1/1985 GOVERNOR CONTROL BOX ASSY (DUAL FUEL, SI PUBLISHED

EDS-1919 F 3/4/2009 PERMANENT MAGNETIC ALTERNATOR PUBLISHED

EDS-1921 M 7/18/2007 CONTROL ASSEMBLY, FUEL PUBLISHED

EDS-1922 A 3/31/1989 VALVE, FUEL, TORQUE LIMITING PUBLISHED

EDS-1924 L 9/8/1992 CONTROL ASSEMBLY-GAS PRODUCER-FUEL PUBLISHED

EDS-1925 B 10/16/2015 OVERSPEED GOVERNOR ASSY, OIL AND AIR, PO PUBLISHED

EDS-1928 9/27/1985 ELECTRONIC GOVERNOR CONTROL BOX ASSY. (S PUBLISHED

EDS-1929 11/7/1985 GOVERNOR CONTROL ASSY, ELECTRONIC-DIRECT PUBLISHED

EDS-1930 8/20/1985 GOVERNOR ACTUATOR, DIRECT ACTING PUBLISHED

EDS-1931 10/2/1985 LIQUID FUEL VALVE WITHOUT CDP START CONT PUBLISHED

EDS-1932 7/23/1986 DIGITAL ELECTRONIC CONTROL ASSEMBLY PUBLISHED

EDS-1934 D 12/12/1989 FUEL METERING AND CVG CONTROL ASSEMBLY PUBLISHED

EDS-1935 A 2/16/1988 VALVE ASSEMBLY, COMPRESSOR BLEED PUBLISHED

EDS-1937 D 8/10/1988 AUTOMATIC REIGNITION CONTROL, ELECTRIC PUBLISHED

EDS-1938 B 8/24/1987 FLAMEOUT/SURGE DETECTOR ASSEMBLY PUBLISHED

EDS-1939 A 6/26/1997 FUEL VALVE ASSEMBLY, GAS FUEL, HIGH FLOW PUBLISHED

EDS-1940 1/13/1986 ANTI-ICING AIR VALVE ASSEMBLY PUBLISHED

EDS-1941 D 8/18/1992 CONTROL ASSEMBLY-GAS PRODUCER-FUEL PUBLISHED

EDS-1942 A 1/1/1993 CONTROL ASSEMBLY-GAS PRODUCER-FUEL PUBLISHED

EDS-1943 A 1/20/1993 CONTROL ASSEMBLY-GAS PRODUCER-FUEL PUBLISHED

EDS-1945 H 1/31/1991 SPEED TEMP CONTROL BOX ASSY/TOT PUBLISHED

EDS-1947 F 1/6/1998 GOVERNOR CONTROL BOX ASSEMBLY PUBLISHED

EDS-1950 5/27/1986 NOZZLE ASSEMBLY,WATER METHANOL INJECTION PUBLISHED

EDS-1951 B 7/14/1989 VALVE, ANTI-ICING AIR PUBLISHED

EDS-1952 12/2/1987 ACTUATOR, HYDRAULIC VARIABLE COMPRESSOR PUBLISHED

EDS-1955 5/22/1989 OIL TANK ASSEMBLY (501-M80G) PUBLISHED

EDS-1956 10/16/1989 OIL CONDITIONING UNIT (T406) PUBLISHED

EDS-1957 9/15/1986 VALVE, LIQUID FUEL (EXPLOSION-PROOF) PUBLISHED

EDS-1960 10/16/1989 AIR/OIL SEPARATOR WITH DEBRIS MONITOR PUBLISHED

EDS-1966 5/15/1987 CONTROL ASSEMBLY, DIGITAL ELECTRONIC PUBLISHED

28

Specification


EDS-1967 J 12/20/2000 GENERATOR SPECIFICATION-AG9130 PUBLISHED

EDS-1968 D 9/15/1992 SPEED REDUCTION GEARBOX SPECIFICATION PUBLISHED

EDS-1969 E 12/8/1995 EXCITATION CONTROL SYSTEM SPEC PUBLISHED

EDS-1970 C 3/9/1994 PNEUMATIC STARTER (LOW PRESSURE AIR INLE PUBLISHED

EDS-1971 D 1/12/1991 LOCAL OPERATING PANEL SPECIFICATION PUBLISHED

EDS-1972 5/21/1990 NOZZLE ASSY SINGLE ENTRY FUEL PUBLISHED

EDS-1973 7/2/1987 T406 EMS AIRBORNE SOFTWARE SPECIFICATION PUBLISHED

EDS-1974 2/10/1989 PUMP, LUBRICATION AND SCAVENGE PUBLISHED

EDS-1975 D 8/10/1988 AUTOMATIC REIGNITION CONTROL, ELECTRONIC PUBLISHED

EDS-1987 6/8/1988 FILTER ASSEMBLY, FUEL-H.P. PUBLISHED

EDS-1988 G 6/3/1992 CONTROL ASSEMBLY-GAS PRODUCER-FUEL PUBLISHED

EDS-1989 B 3/28/1990 VALVE, FUEL, TORQUE LIMITING PUBLISHED

EDS-1990 5/7/1987 VALVE ASSEMBLY, COMPRESSOR BLEED PUBLISHED

EDS-1991 E 4/19/1996 DIGITAL ELECTRONIC CONTROL ASSEMBLY PUBLISHED

EDS-1993 A 10/16/1996 LIQUID FUEL,METERING VALVE PUBLISHED

EDS-1995 12/16/1987 DIGITAL CONTROL ASSEMBLY PUBLISHED

EDS-1996 1/18/1988 FULL AUTHORITY DIGITAL ELECTRONIC CONTRO PUBLISHED

EDS-1997 A 2/2/1988 CONTROL ASSEMBLY,EMERGENCY OVERSPEED PUBLISHED

EDS-1998 10/13/1987 CONTROL ASSEMBLY, DIGITAL ELECTRONIC PUBLISHED

EDS-1999 A 4/16/1992 TURBOSHAFT ENGINE SHIPPING CONTAINER INS PUBLISHED

EDS-2000 D 7/8/1971 PUMP ASSY, L.P. FUEL PUBLISHED

EDS-2001 C 3/10/1972 IGNITER ASSY-SPARK PUBLISHED

EDS-2002 A 2/6/1969 LEAD ASSY-SPARK IGNITER CONTROL PUBLISHED

EDS-2003 C 5/30/1972 EXCITER ASSY-IGNITION MONITOR (T6) PUBLISHED

EDS-2004 C 7/18/1969 GENERATOR ASSY-PERMANENT MAGNET PUBLISHED

EDS-2005 A 1/10/1969 TACHOMETER ASSY, LOW PRESSURE ROTOR PUBLISHED

EDS-2006 B 1/16/1969 ACTUATOR, AUTOMATIC IGNITION PUBLISHED

EDS-2007 B 6/5/1972 SWITCH ASSY, PRESSURE FUEL PUBLISHED

EDS-2008 B 1/10/1969 SWITCH ASSY, FUEL DIP CUTOUT PUBLISHED

EDS-2009 A 2/6/1969 SWITCH ASSY, PRESS.-ANTI-ICING AIR ADVIS PUBLISHED

EDS-2010 A 11/18/1968 THERMOCOUPLE ASSY, T5 TURBINE EXHAUST PUBLISHED

EDS-2011 A 2/6/1969 SWITCH ASSY, PRESS. ANTI-ICING AIR OVERP PUBLISHED

29

Specification


EDS-2012 A 7/22/1968 INDICATOR ASSY, DIFF PRESS. PUBLISHED

EDS-2014 4/21/1969 AMPLIFIER ASSY, TOP TEMP. LIMITER PUBLISHED

EDS-2015 6/17/1968 ELBOW ASSY, FUEL SPRAY PUBLISHED

EDS-2016 B 10/24/1975 FILTER ASSY, FUEL PUBLISHED

EDS-2018 B 6/15/1971 VALVE ASSY, SHUTOFF-H.P. FUEL PUBLISHED

EDS-2019 C 3/11/1970 PUMP ASSY, H.P. FUEL PUBLISHED

EDS-2020 E 4/21/1972 VALVE ASSY, COLD START FUEL-SOL OPERATED PUBLISHED

EDS-2021 C 10/8/1969 VALVE ASSY, ANTI-ICING PUBLISHED


EDS-2023 D 2/9/1972 REGULATOR ASSY, AIR FLOW & ACTUATOR PUBLISHED

EDS-2024 B 1/10/1969 CONTROL ASSY, MAIN FUEL (C.A.S.C.) PUBLISHED

EDS-2025 7/10/1968 ELBOW ASSY, FUEL SPRAY PUBLISHED

EDS-2026 A 12/17/1971 FILTER ASSY, FUEL PUBLISHED

EDS-2027 D 7/2/1970 DISTRIBUTOR ASSY, FUEL SPRAY CONTROL PUBLISHED

EDS-2028 C 9/16/1980 VALVE ASSY, SHUTOFF-H.P. FUEL PUBLISHED

EDS-2029 A 2/6/1969 PUMP ASSY, H.P. FUEL PUBLISHED

EDS-2030 A 2/6/1969 THERMOCOUPLE ASSY, T3 HARNES ASSY, T3 T/ PUBLISHED

EDS-2031 9/12/1968 VALVE ASSY, ANTI-ICING PUBLISHED


EDS-2033 B 3/26/1971 RELAY BOX ASSY, CONTROL PUBLISHED

EDS-2034 C 8/6/1969 VALVE ASSY, FUEL DIP PUBLISHED

EDS-2035 12/11/1968 CONTROL ASSY, MAIN FUEL /C. A. S. C./ PUBLISHED

EDS-2036 12/6/1968 SWITCH ASSY, FUEL DIP CUTOUT PUBLISHED

EDS-2037 3/4/1969 CONTROL ASSY, MAIN FUEL (C.A.S.C.) PUBLISHED

EDS-2038 A 1/4/1971 CONTROL ASSY, MANUAL FUEL PUBLISHED

EDS-2039 A 4/21/1972 VALVE ASSY, COLD START FUEL-SOL. OPERATE PUBLISHED

EDS-2040 6/24/1969 AMPLIFIER ASSY, TOP TEMP. LIMITER PUBLISHED

EDS-2041 7/2/1969 THERMOCOUPLE ASSY T1 PUBLISHED

EDS-2042 C 12/4/1974 CONTROL ASSY, MAIN FUEL (C.A.S.C.) PUBLISHED

EDS-2043 3/6/1970 PUMP ASSY, H. P. FUEL PUBLISHED

EDS-2044 B 4/11/1972 PUMP ASSY, H. P. FUEL PUBLISHED

EDS-2045 B 6/17/1971 AMPLIFIER ASSY, TOP TEMPERATURE LIMITER PUBLISHED

30

Specification


EDS-2046 5/12/1970 RELAY BOX ASSY CONTROL PUBLISHED

EDS-2047 6/26/1970 CONTROL ASSY, MAIN FUEL (C.A.S.C.) PUBLISHED

EDS-2048 10/30/1970 CAMBOX ASSY, CONTROL PUBLISHED

EDS-2049 12/17/1970 ACTUATOR, AUTOMATIC IGNITION PUBLISHED

EDS-2050 6/2/1971 REGULATOR ASSY, AIR FLOW-ENGINE PUBLISHED

EDS-2051 A 12/13/1973 REGULATOR ASSY, AIR FLOW-ENGINE PUBLISHED

EDS-2052 A 9/16/1980 COMBUSTION LINER FLAME TUBE RIG TEST (TF PUBLISHED

EDS-3000 12/16/1987 DIGITAL CONTROL ASSEMBLY PUBLISHED

EDS-3001 A 11/16/1988 APPLICATION OF ALLISON SPECIFICATIONS TO PUBLISHED

EDS-3002 B 12/5/1991 VALVE ASSY. PUBLISHED

EDS-3004 E 1/7/1993 CONTROL ASSY GAS PROD FUEL PUBLISHED

EDS-3005 B 12/5/1991 GOV. ASSY. FUEL POWER TURBINE PUBLISHED

EDS-3006 A 11/27/1989 FULL AUTH DIGITAL ELECTRONIC CONTROL-HAR PUBLISHED


EDS-3009 10/21/1988 FULL AUTH DIGITAL ELEC CONTROL LOGIC/SOF PUBLISHED

EDS-3010 A 12/12/1989 ANALOG BACKUP ELECTRONIC CONTROL PUBLISHED

EDS-3011 C 4/2/1992 ACTUATOR HYDRAULIC VARIABLE COMPR GEOM W PUBLISHED

EDS-3012 A 12/12/1989 FUEL METERING AND CVG CONTROL ASSY PUBLISHED

EDS-3013 A 5/21/1990 FUEL PUMP, FUEL HEATER & FILTER ASSY PUBLISHED

EDS-3018 1/5/1989 OIL FILTER SPECIFICATION GUIDE PUBLISHED

EDS-3020 5/21/1990 MAONETIC CHIP DETECTOR POWER MODULE SYST PUBLISHED

EDS-3021 E 5/7/2011 CARBON CIRCUMFERENTIAL-SEAL ASSEMBLIES D PUBLISHED


EDS-3023 C 4/2/1992 PUMP AND REG./RELIEF VALVE ASSY CTS 800 PUBLISHED

EDS-3024 C 4/2/1992 PUMP & REGULATOR/RELIEF VLV ASSY-CTS 800 PUBLISHED


EDS-3027 1/17/1990 PUMP, LUBRICATION AND SCAVENGE PUBLISHED

EDS-3028 C 2/9/1998 OIL TANK ASSEMBLY PUBLISHED

EDS-3029 A 6/30/1993 OIL CONDITIONING UNIT PUBLISHED



31

Specification


EDS-3036 10/3/1989UPGRADE GUIDELINES FOR MILITARY SPECIFIED ELELCTRICAL COMPONENT

PROCUREMENT PUBLISHED

EDS-3037 N 3/7/2014 FILTER LUBE & SCAVENGE PUMP SPEC PUBLISHED

EDS-3038 1/19/1990 PUMP AND REGULATOR/RELIEF VALVE ASSY PUBLISHED

EDS-3039 1/19/1990 PUMP AND REGULATOR/RELIEF VALVE ASSY PUBLISHED

EDS-3040 C 11/19/2007 FULL AUTHORITY DIGITAL ELECTRONIC CONTRO PUBLISHED

EDS-3043 D 8/25/1994 ENGINE MOUNT SYSTEM PUBLISHED

EDS-3044 B 4/2/1992 ELECTRONIC CONTROL PUBLISHED

EDS-3045 B 4/5/1991 SENSOR COMBINATION TOTAL TEMPERATURE & T PUBLISHED

EDS-3046 C 10/2/1991 RELAY IGNITION PUBLISHED

EDS-3047 D 4/19/1996 SCAVANGE FILTER AND PRESSURE FILTER UNIT PUBLISHED

EDS-3048 D 3/31/2003 AIR/OIL SEPARATOR ASSY, DESIGN, FAB, AND PUBLISHED

EDS-3050 D 7/23/2007 ELECTRICAL HARNESS ASSEMBLY PUBLISHED

EDS-3051 2/27/1990 LUBRICATION AND SCAVENGE PUMP ASSY DESIG PUBLISHED

EDS-3052 12/13/1991 SOFTWARE SPEC. FOR SAAB 2000 PROP. SYST PUBLISHED

EDS-3053 10/2/1991 OIL TANK ASSEMBLY PUBLISHED

EDS-3054 C 3/18/2002 LUBE & SCAVENGE PUMP ASSY WITH REGULATIN PUBLISHED

EDS-3055 A 1/18/1996 OIL FILTER ASSY PUBLISHED

EDS-3057 F 4/22/2006 OIL TANK AND AIR/OIL SEPERATOR ASSEMBLY PUBLISHED

EDS-3058 6/20/1992 OIL FILTER MANIFOLD ASSEMBLY PROCUREMENT PUBLISHED

EDS-3059 6/20/1992 OIL PRESSURE TRANS. PRO. SPECIFICATION PUBLISHED

EDS-3060 6/20/1992 MALFUNCTION VALVE PROCUREMENT SPECIFICAT PUBLISHED

EDS-3061 6/20/1992 OIL DEBRIS SENSOR PROCUREMENT SPECIFICAT PUBLISHED

EDS-3062 6/20/1992 OIL FILTER ELEMENT PROCUREMENT SPECIFICA PUBLISHED

EDS-3064 2/16/1993 NON-PTO REDUCTION GEARBOX PROCUREMENT SP PUBLISHED

EDS-3065 H 2/13/2004 ACCESSORY GEARBOX ASSEMBLY PUBLISHED

EDS-3066 C 5/19/1994 FILTER ASSEMBLY FUEL H.D. PUBLISHED

EDS-3067 A 9/30/1992 FILTER ASSEMBLY, FUEL PUBLISHED

EDS-3068 M 1/15/1998 ELECTRICAL/ELECTRONIC INTERFACE SPECIFIC PUBLISHED

EDS-3070 A 5/5/1992 DESIGN AND PROCUREMENT SPECIFICATION FOR PUBLISHED

EDS-3071 8/27/1990 FUEL AUTHORITY DIGITAL ELECTRONIC CONTRO PUBLISHED

EDS-3073 G 10/10/2018 VALVE, ANTI-ICING AIR (501-M80R, T406, A PUBLISHED

32

Specification


EDS-3074 G 8/11/2014 Actuator Hydraulic, Compressor Variable PUBLISHED

EDS-3077 C 1/28/1992 CONTROL ASSY NZ OVERSPEED PUBLISHED

EDS-3078 B 1/5/2011 ABSOLUTE OIL PRESSURE SENSOR PUBLISHED

EDS-3079 6/25/1991 ABSOLUTE OIL PRESSURE SWITCH PUBLISHED

EDS-3080 10/15/1990 STUD LOCKED IN-KEY LOCKED PUBLISHED

EDS-3081 11/10/1990 INSERT, SCREW THREAD, LOCKED IN, KEY LOC PUBLISHED

EDS-3082 9/3/1991 POWER TURBINE OVERSPEED CONTROL PUBLISHED

EDS-3083 9/3/1991 ACCEPTANCE TEST POWER TURBINE OVERSPEED PUBLISHED

EDS-3084 C 2/26/2003 APPROVAL AND CONTROL FOR ALLOY MELTING A PUBLISHED

EDS-3085 6/17/1992 OIL TANK PRESSURIZATION VALVE PUBLISHED

EDS-3086 A 9/8/1992 VALVE ANTI-ICING AIR PUBLISHED

EDS-3087 F 11/19/2007 FULL AUTHORITY DIGITAL ELECTRONIC CONTRO PUBLISHED

EDS-3088 6/12/1992 MONOPOLE TORQUEMETER PICKUP PUBLISHED

EDS-3089 B 9/26/2001 GAS PRODUCER SPEED PICKUP PUBLISHED

EDS-3090 6/11/1992 POWER TURBINE PICKUP AND CONVERSION PUBLISHED

EDS-3091 D 3/31/2003 INDICATING MAGNETIC PLUG PUBLISHED

EDS-3092 C 2/15/2006 AIR/OIL SEPARATOR ASSEMBLY PUBLISHED

EDS-3093 A 10/2/1991 CONTROL ASSY., N2 OVERSPEED PUBLISHED

EDS-3094 A 10/2/1991 CONTROL ASSY, N2 OVERSPEED PUBLISHED

EDS-3097 B 9/20/1994 PRODUCTION SOFTWARE SPECIFICATION PUBLISHED

EDS-3100 D 9/20/2001 FAN SPEED SENSOR PUBLISHED

EDS-3102 B 1/5/2011 P2.5 ABSOULTE PRESSURE TRANSDUCER PUBLISHED

EDS-3103 6/17/1992 OIL COOLER ASSEMBLY PUBLISHED

EDS-3104 D 9/9/2003 FUEL/OIL HEAT EXCHANGER PUBLISHED

EDS-3105 C 7/10/2006 CIT SENSOR (T2) (T2.5) PUBLISHED

EDS-3106 D 4/27/2006 CIP SENSOR (P2) PUBLISHED

EDS-3107 E 12/7/2012 FUEL PUMP AND METERING UNIT PUBLISHED

EDS-3108 C 7/3/2013 ABSOLUTE AIR PRESSURE SENSOR PUBLISHED

EDS-3109 A 1/15/1993 ABSOLUTE AIR PRESSURE SENSOR PUBLISHED

EDS-3110 6/11/1992 ABSOLUTE OIL PRESSURE SENSOR PUBLISHED

EDS-3111 7/28/1992 TEMPERATURE SENSOR PUBLISHED

EDS-3112 C 4/27/2006 ENGINE MONITORING SYSTEM MASS FUEL FLOW PUBLISHED

33

Specification


EDS-3113 A 1/13/2000 ACCELEROMETER ASSEMBLY PUBLISHED

EDS-3114 1/16/1991 Flammable/Combustible (F/C) Liquid Sample Shipping Package Instructions PUBLISHED

EDS-3115 D 4/10/2009 IGNITER PLUG ASSEMBLY PUBLISHED

EDS-3116 A 9/26/2001 TURBINE INTERSTAGE THERMOCOUPLE ASSEMBLY PUBLISHED

EDS-3117 D 2/25/1995 ELECTRICAL/ELECTRONIC INTERFACE SPECIFIC PUBLISHED

EDS-3118 A 10/23/1996 AIR TURBINE STARTER PUBLISHED

EDS-3119 C 5/24/1996 45 KVA, OIL-COOLED AC GENERATING SYSTEM PUBLISHED

EDS-3120 7/23/1993 ENGINEERING DESIGN SPECIFICATION FOR THE PUBLISHED

EDS-3121 B 5/10/2000 FUEL NOZZLE ASSEMBLY PUBLISHED

EDS-3124 B 1/12/1999 VALVE ASSEMBLY,BOOST COMPRESSOR BLEED PUBLISHED


EDS-3126 10/2/1991 ACCEPTANCE TEST POWER TURBINE OVERSPEED PUBLISHED

EDS-3127 C 9/26/2001 FLUID TEMPERATURE SWITCH PUBLISHED

EDS-3128 A 4/30/1993 INSTRUCTIONS FOR INSTALLATION OF AN ENGI PUBLISHED

EDS-3131 N 4/5/2021 FULL AUTHORITY DIGITAL ELECTRONIC CONTRO PUBLISHED

EDS-3132 11/25/1991 SHIPPING CONTAINER MAINTAINABILITY INSTRUCTIONS PUBLISHED


EDS-3134 4/2/1992 ACCEPTANCE TEST POWER TURBINE CONTROL PUBLISHED

EDS-3135 B 2/21/1996 ELECTRONIC CONTROL PUBLISHED

EDS-3138 L 1/15/1998 SYSTEM SEGMENT SPECIFICATION (CONTROL SY PUBLISHED

EDS-3139 B 1/24/2003 ELECTRICAL HARNESS SPECIFICATION PUBLISHED

EDS-3140 E 5/28/2020 IGNITION EXCITER UNIT PUBLISHED

EDS-3141 L 1/28/1998 SOFTWARE SPECIFICATION FOR SAAB 2000 PRO PUBLISHED

EDS-3142 A 11/17/1992 SOFTWARE REQUIREMENT SPECIFICATION FOR 5 PUBLISHED

EDS-3145 D 4/25/2008 CONTROL ASSEMBLY-GAS PRODUCER-FUEL PUBLISHED

EDS-3146 6/11/1992 ELECTRONIC CONTROL PUBLISHED

EDS-3148 H 1/23/2013 AIRCRAFT/ PROPULSION CONTROL SYSTEM ELEC PUBLISHED

EDS-3149 F 1/23/2013 SYSTEM SEGMENT SPECIFICATION PUBLISHED

EDS-3150 A 2/6/1998 VALVE, GAS FUEL METERING - LOW BTU PUBLISHED

EDS-3152 J 9/7/2007 SOFTWARE SPECIFICATION FOR THE LOCKHEED PUBLISHED

EDS-3153-CS 9/8/1992 AE-3007 ENGINE DESIGN REQUIREMENTS (COMP PUBLISHED

EDS-3154 AA 9/29/2015 AE-3007A ENGINE CONTROL SYSTEM REQUIREME PUBLISHED

34

Specification


EDS-3156 B 10/26/1993 LOW PRESSURE FUEL FILTER ASSY. PUBLISHED

EDS-3159 AB 7/6/2015 PRODUCTION SOFTWARE SPECIFICATION PUBLISHED

EDS-3160 8/4/1995 INSTALLATION, HANDLING,AND SHIPPING PROC PUBLISHED

EDS-3166 E 6/28/2013 VALUE, LIQUID FUEL (EXPLOSION PROOF) PUBLISHED

EDS-3167 2/18/1994 NACELLE INTERFACE UNIT SYSTEM SEGMENT SP PUBLISHED

EDS-3168 5/6/1994 NACELLE INTERFACE UNIT HARDWARE SPECIFIC PUBLISHED

EDS-3169 D 4/19/2000 SOFTWARE REQUIREMENTS SPECIFICATION FOR PUBLISHED

EDS-3172 B 8/2/1996 OIL TANK ASSEMBLY DESIGN,FABRICATION, AN PUBLISHED

EDS-3173 D 1/22/1997 FUEL COOLED OIL COOLER ASSEMBLY PUBLISHED

EDS-3174 A 2/9/1996 AE3007 ENGINE/SHIPPING CONTAINER INSTALL PUBLISHED

EDS-3175 2/12/1993 AIR COOLED OIL COOLER ASSEMBLY PUBLISHED

EDS-3176 B 4/6/1993 VALIDATION TEST PLAN, PROCEDURES, & RESU PUBLISHED

EDS-3179 7/14/1993 CIT SENSOR REQUIREMENTS PUBLISHED

EDS-3180 B 8/1/2008 PERMANENT MAGNET ALTERNATOR PUBLISHED

EDS-3181 7/16/1993 PRESSURE TRANDUCER REQUIRMENTS PUBLISHED

EDS-3183 M 6/8/2017 CITATION X/AE3007C ENGINE CONTROL AND IN PUBLISHED

EDS-3184 R 7/6/2015 AE3007C ENGINE CONTROL SYSTEM REQUIRMENT PUBLISHED

EDS-3185 7/27/1993 SPEED SENSOR REQUIREMENTS PUBLISHED

EDS-3186 B 1/14/1994 SOFTWARE SPECIFICATION FOR THE IPTN N-25 PUBLISHED

EDS-3189 C 11/19/2007 FULL AUTHORITY DIGITAL ENGINE CONTROL HA PUBLISHED

EDS-3190 B 12/20/1994 CONTROL SYSTEM VERIFICATION PROCEDURES PUBLISHED

EDS-3191 C 7/10/2006 CIT SENSOR (T2),(T2.5) DUAL ELEMENT PUBLISHED

EDS-3193 A 5/15/1996 PUMP ASSEMBLY, FUEL PUBLISHED

EDS-3194 A 11/30/1995 1OTH STAGE PRE-COOLER ASSEMBLY PUBLISHED

EDS-3195 A 7/9/1993 SYSTEM SEGMENT SPECIFICATION (CONTROL SY PUBLISHED

EDS-3196 3/28/1995 HYDROMECHANICAL UNIT PUBLISHED

EDS-3197 A 2/6/1998 FUEL VALVE ASSY., GAS FUEL, HIGH TEMPERA PUBLISHED

EDS-3198 3/17/1994 FUEL VALVE ASSY., GAS FUEL PUBLISHED



EDS-3202 B 9/30/2008 POWER TURBINE SPEED PICKUP (NP) PUBLISHED

EDS-3203 B 9/26/2001 MONOPOLE TORQUE PICKUP PUBLISHED

35

Specification


EDS-3204 11/19/1993 IGNITER ASSEMBLY,RECESSED ELECTRODE PUBLISHED

EDS-3205 E 10/14/1996 VALIDATION TEST PLAN AND PROC. FOR THE A PUBLISHED

EDS-3206 C 4/27/1994 FORWARD INNER DUCT ASSEMBLIES PUBLISHED

EDS-3207 8/5/1993 MODEL 250 SOLID STATE IGNITION EXCITER PUBLISHED

EDS-3208 11/19/1993 TRIM PLUG,ITT ( DUAL ELEMENT ) PUBLISHED

EDS-3209 A 12/8/1995 SPEED REDUCTION GEARBOX SPECIFICTION PUBLISHED

EDS-3210 C 5/27/1998 SYSTEM SPECIFICATION FOR THE DIGITAL CON PUBLISHED

EDS-3211 5/7/1993 TEMPERATURE MONITOR ASSEMBLY PUBLISHED

EDS-3213 A 7/1/1994 OIL TANK ASSEMBLY DESIGN, FABRICATION, A PUBLISHED

EDS-3214 A 9/9/1993 VALIDATION TEST PLAN AND PROC. FOR THE G PUBLISHED

EDS-3216 11/1/1993 Process Control for Embedding Software in Aircraft Products PUBLISHED

EDS-3217 B 4/21/1998 INSTALLATION, HANDLING, AND SHIPPING PRO PUBLISHED

EDS-3218 D 11/19/2007 FULL AUTHORITY DIGITAL ELECTRONIC CONTRO PUBLISHED

EDS-3219 B 11/4/1999 LOCAL OPERATING PANEL SPECIFICATION PUBLISHED

EDS-3226 A 3/28/1996 CONTROL SYSTEM VERIFICATION TEST CASES A PUBLISHED

EDS-3228 A 12/8/1995 PNEUMATIC STARTER ( LOW PRESSURE AIR INL PUBLISHED

EDS-3229 C 7/31/2013 ABSOLUTE OIL PRESSURE SENSOR PUBLISHED

EDS-3232 H 6/26/2018 FUEL PUMP AND METERING UNIT PUBLISHED

EDS-3236 B 9/26/2001 FLUID TEMPERATURE SWITCH PUBLISHED

EDS-3237 G 7/29/2011 OIL CONDITIONING UNIT PUBLISHED




EDS-3241 B 9/9/1996 OIL TANK PRESSURIZATION VALVE PUBLISHED

EDS-3243 1/10/1994 MAGNETIC CHIP DETECTOR POWER MODULE SYST PUBLISHED

EDS-3244 7/29/1995 AE3007 ENGINE/SHIPPING STAND INSTALLATIO PUBLISHED

EDS-3246 1/27/1994 HIRF AND RADIO FREQUENCY (RF) SUSCEPTIBI PUBLISHED

EDS-3250 F 1/31/2011 SOFTWARE REQUIREMENTS SPECIFICATION FOR PUBLISHED

EDS-3251 A 6/26/1997 FUEL VALVE ASSY, GAS FUEL, EXTENDED RANG PUBLISHED

EDS-3252 12/1/1997 VALVE, GAS FUEL METERING, 6500 PPH PUBLISHED

EDS-3253 A 2/6/1998 VALVE, GAS FUEL METERING-LOW BTU, REDUCE PUBLISHED


36

Specification


EDS-3258 C 1/18/2006 VALVE ASSEMBLE, NORMALLY OPEN, SOLENOID PUBLISHED

EDS-3259 A 9/9/2003 FUEL COOLED OIL COOLER ASSEMBLY PUBLISHED

EDS-3260 E 7/1/1996 SYSTEM SEGMENT SPECIFICATION (CONTROL SY PUBLISHED

EDS-3262 B 1/5/2011 DIFFERENTIAL OIL PRESSURE SENSOR PUBLISHED

EDS-3264 B 2/22/1996 ELECTRICAL HARNESS ASSEMBLY PUBLISHED

EDS-3266 A 10/19/1995 501-K SERIES ENGINE DIGITAL CONTROL HARD PUBLISHED

EDS-3267 K 9/29/2000 EMB-145/AE3007A ENGINE CONTROL AND INDIC PUBLISHED

EDS-3268 A 9/26/2001 ENGINE VIBRATION SIGNAL CONDITIONER PUBLISHED

EDS-3269 C 7/28/2006 TEMPERATURE SENSOR, AIR, OIL PUBLISHED

EDS-3270 J 4/21/1999 AE3007A PRODUCTION SOFTWARE SPECIFICATIO PUBLISHED

EDS-3271 C 5/7/2011 CARBON CIRCUMFERENTIAL SEAL ASSEMBLIES D PUBLISHED

EDS-3272 A 2/6/1998 FUEL VALVE ASSY., GAS FUEL, HIGH TEMPERA PUBLISHED

EDS-3273 A 4/19/1996 VALVE, ANTI-ICING AIR PUBLISHED

EDS-3274 C 3/18/1998 SYSTEM SPECIFICATION FOR THE DIGITAL CON PUBLISHED

EDS-3275 D 9/10/2007 INTERFACE REQUIREMENTS FOR THE ROTOL R39 PUBLISHED

EDS-3276 F 3/16/2021 IGNITION EXCITER PUBLISHED


EDS-3279 5/16/1995 MODEL 250 COMBINED ENGINE FILTER ASSEMBL PUBLISHED

EDS-3280 A 9/27/1995 ENGINE/NIU INTERFACE SPECIFICATION PUBLISHED

EDS-3282 F 3/5/2021 CONTROL SYSTEM SPECIFICATION (EMD PHASE) PUBLISHED


EDS-3295 B 12/16/1996 ELECTRICAL/ELECTRONIC INTERFACE SPECIFIC PUBLISHED

EDS-3296 A 8/27/1996 SYSTEM VERIFICATION TEST PLAN & PROCEDUR PUBLISHED

EDS-3297 B 12/13/1996 SYSTEM SEGMENT SPECIFICATION (CONTROL SY PUBLISHED

EDS-3298 10/5/1995 MODEL 250 FULL-AUTHORITY DIGITIAL ELECTR PUBLISHED


EDS-3302 10/10/1995 ALLISON 250-C40 ENGINE MAINTENANCE INTER PUBLISHED

EDS-3303 B 4/3/2003 FUEL VALVE ASSEMBLY LIQUID, MAXIMUM 6500 PUBLISHED

EDS-3304 3/14/2000 FILTER, LUBRICATION AND SCAVENGE PUMP SP PUBLISHED

EDS-3305 B 12/16/1996 SOFTWARE REQUIREMENTS SPECIFICATION FOR PUBLISHED


EDS-3307 D 12/12/2018 SCAVENGE AND PRESSURE OIL FILTER UNIT PUBLISHED

37

Specification


EDS-3308 B 8/10/2020 FUEL VALVE ASSEMBLY, LIQUID FUEL, MAXIMU PUBLISHED

EDS-3312 D 1/9/1998 HYDROMECHANICAL UNIT PUBLISHED

EDS-3313 D 5/13/1996 SYSTEM VERIFICATION PROCEDURES PUBLISHED

EDS-3314 B 10/13/1999 LOCAL OPERATING PANEL SPECIFICATION PUBLISHED

EDS-3315 B 4/17/2009 STARTING AIR ASSIST RAFT ASSEMBLY PUBLISHED

EDS-3316 A 2/21/1996 CONTROL SYSTEM VERIFICATION PROCEDURE FO PUBLISHED

EDS-3317 G 5/24/2012 PRODUCTION SOFTWARE SPECIFICATION PUBLISHED

EDS-3318 C 5/17/2012 AE3007H ENGINE CONTROL SYSTEM REQUIREMEN PUBLISHED

EDS-3319 F 3/30/2017 TIER 11 +/ AE3007H ENGINE CONTROL AND IN PUBLISHED

EDS-3321 B 11/23/2011 AIR TURBINE STARTER PUBLISHED

EDS-3322 C 7/28/2008 ENGINEERING DESIGN SPECIFICATION FOR THE PUBLISHED

EDS-3323 8/13/1998 ENGINE ANALYZER UNIT PUBLISHED



EDS-3328 A 9/12/1997 SOFTWARE REQUIREMENTS SPECIFICATION FOR PUBLISHED

EDS-3330 A 10/11/1996 INSTALLATION INSTRUCTIONS, ENGINE INTO S PUBLISHED

EDS-3331 A 3/26/1997 CONTROL SYSTEM VERIFICATION PLAN PUBLISHED

EDS-3332 B 8/20/1997 HYDROMECHANICAL UNIT PUBLISHED

EDS-3333 A 6/23/1997 CONTROL SYSTEM VERIFICATION PLAN PUBLISHED

EDS-3335 12/12/1996 AIR GAP SPARK IGNITNER, INDUSTRIAL PUBLISHED

EDS-3336 A 7/14/1999 IGNITION EXCITER, INDUSTRIAL TURBINE ENG PUBLISHED

EDS-3337 3/6/1998 AUXILIARY SCAVENGE PUMP ASSEMBLY PUBLISHED

EDS-3338 6/16/1996 SOFTWARE VALIDATION PLAN, PROCEDURES, AN PUBLISHED

EDS-3339 A 6/18/1997 COMBINED ENGINE FILTER ASSEMBLY (CEFA) P PUBLISHED

EDS-3340 A 6/18/1997 MODEL 250 COMBINED ENGINE FILTER ASSEMBL PUBLISHED

EDS-3341 A 6/18/1997 COMBINED ENGINE FILTER ASEMBLY (CEFA) PR PUBLISHED

EDS-3342 A 11/4/1999 LOCAL OPERATING PANEL SPECIFICATION - AP PUBLISHED

EDS-3343 12/12/1996 COMPRESSOR INLET TEMPERATURE SENSOR PUBLISHED

EDS-3344 B 12/10/1999 ACTUATOR ASSEMBLY, COMPRESSOR VARIABLE G PUBLISHED

EDS-3345 A 1/21/1998 SIGNAL CONDITIONER, VIBRATION PUBLISHED

EDS-3347 A 8/11/1997 LOW PRESSURE TURBINE SPEED PICKUP PUBLISHED

EDS-3348 A 8/11/1997 HIGH PRESSURE TURBINE SPEED PICKUP PUBLISHED

38

Specification


EDS-3349 1/30/1997 OVERRUNNING CLUTCH PUBLISHED

EDS-3350 4/15/1997 TURBINE OUTLET TEMPERATURE SENSOR PUBLISHED

EDS-3351 C 7/1/1999 Thermocouple Standards for Bulk Thermocouple Wire and Premade Sensors PUBLISHED

EDS-3353 3/11/1997 MODEL 250 FUEL HEATER UNIT PUBLISHED

EDS-3354 B 11/16/2000 ALLISON 601-K SERIES ENGINE DIGITAL CONT PUBLISHED

EDS-3355 10/8/1996 VALVE, ANTI-ICING AIR PUBLISHED

EDS-3356 12/6/1996 VERSION 3.5 SOFTWARE SPECIFICATION FOR T PUBLISHED



EDS-3359-CS 4/8/1997 ALLISON ATS DEMONSTRATOR ENGINE DESIGN PUBLISHED

EDS-3360 A 4/17/1998 PROP BRAKE DESIGN SPECIFICATION PUBLISHED

EDS-3361 1/9/1997 VALIDATION TEST PLAN AND PROCEDURES FOR PUBLISHED


EDS-3369-CS 4/8/1997 ALLISON ATS DEMONSTRATOR ENGINE DESIGN PUBLISHED

EDS-3370 A 7/29/1997 HYDROMECHANICAL UNIT PUBLISHED

EDS-3371 B 2/12/2008 OIL FILTER ASSEMBLY PUBLISHED

EDS-3372 AB 9/29/2015 AE3007A ENGINE CONTROL SOFTWARE REQUIREM PUBLISHED

EDS-3373 A 8/14/1997 FADEC SYSTEM SEGMENT SPECIFICATION PUBLISHED

EDS-3376 12/15/1997 RIMSS TRANSFER GEARBOX SPECIFICATION PUBLISHED

EDS-3380 D 1/16/2013 PRESSURE TRANSDUCER REQUIREMENTS PUBLISHED

EDS-3381 D 2/11/2015 SYSTEM SEGMENT SPECIFICATION (CONTROL SY PUBLISHED

EDS-3382 8/26/1997 CONTROL SYSTEM VERIFICATION PLAN PUBLISHED

EDS-3383 C 1/23/2013 AIRCRAFT/PROPULSION CONTROL SYSTEM ELECT PUBLISHED

EDS-33836 3/12/2007 GEARBOX SYSTEM AIR-OIL SEPARATOR REQUIRE PUBLISHED

EDS-33837 3/12/2007 GEARBOX SYSTEM SHAFT SEAL REQUIREMENTS PUBLISHED

EDS-3384 D 1/23/2013 AIRCRAFT/PROPULSION CONTROL SYSTEM ELECT PUBLISHED

EDS-3385 8/1/2000 PROPELLER/ENGINE ELECTRICAL INTERFACE SP PUBLISHED

EDS-3386 E 1/23/2013 CONTROL SYSTEM REQUIREMENTS SPECIFICATIO PUBLISHED

EDS-3387 B 10/2/2000 IGNITION EXCITER, ALLISON 601K DLE PUBLISHED

EDS-3390 6/22/1999 MODEL A50LF LIFTFAN FUEL COOLED OIL COOL PUBLISHED

EDS-3391 4/28/1999 LIFTFAN HYDRAULIC MOTOR DRIVEN LUBE AND PUBLISHED

39

Specification



EDS-3393 B 8/20/2001 MODEL 250 SOLID STATE IGNITION EXCITER PUBLISHED

EDS-3394 5/6/1999 MODEL A50LF LIFTFAN LUBRICATION FILTER PUBLISHED



EDS-3397 C 2/16/2011 SOFTWARE SPECIFICATION FOR THE SHINMAYWA PUBLISHED

EDS-3398 5/6/1999 MODEL A50LF LIFTFAN OIL PRESSURE REGULAT PUBLISHED

EDS-3399 A 5/22/2001 MODEL A50LF LIFTFAN GEAR BOX OIL SUPPLY PUBLISHED

EDS-3400 C 1/23/2013 FADEC HARDWARE REQUIREMENTS PUBLISHED

EDS-3403 D 11/20/2009 SOFTWARE SPEC. PUBLISHED


EDS-3407 D 5/11/2010 ACCUMULATOR PUBLISHED

EDS-3413 B 5/2/2001 CONTROL SYSTEM REQUIREMENTS PUBLISHED

EDS-3414 C 5/10/2001 CLUTCH & LUBE CONTROL SOFTWARE REQUIREME PUBLISHED

EDS-3416 A 11/22/2000 CONTROL SYSTEM LIFTFAN/AIRFRAME ELECTRIC PUBLISHED

EDS-3417 4/29/1998 SYSTEM SEGMENT SPECIFICATION (SONTROL SY PUBLISHED

EDS-3419 F 4/3/2001 CONTROL SYSTEM REQUIREMENTS PUBLISHED

EDS-3431 A 10/5/1999 SYSTEM SEGMENT SPEC (CONTROL SYS REQ) PUBLISHED

EDS-3434 1/19/2000 VALVE, FUEL METERING, GAS PUBLISHED

EDS-3435 A 7/11/2000 CONTROL SYSTEM SAFETY REQUIREMENTS PUBLISHED

EDS-3436 9/16/1998 HIGH PRESSURE TURBINE SPEED PICKUP, DUAL PUBLISHED

EDS-3438 B 8/9/2010 EMS LOW LEVEL SOFTWARE REQUIREMENTS FOR PUBLISHED

EDS-3439 B 1/23/2013 AE2100J CONTROL SYSTEM REQUIREMENTS SPEC PUBLISHED

EDS-3441 A 9/9/2003 OIL TANK ASSEMBLY DESIGN, FAB, AND TEST PUBLISHED


EDS-3443 A 9/26/2001 POWER TURBINE SPEED PICKUP (NP) PUBLISHED

EDS-3444 5/21/1999 ACCUMULATOR ABSOLUTE PRESSURE SENSOR PUBLISHED


EDS-3447 1/20/1999 THERMOCOUPLE ASSEMBLIES WITH MULTIPLE IN PUBLISHED

EDS-3448 C 5/22/2001 HYDRAULIC MOTOR SHUTOFF VALVE ASSEMBLY PUBLISHED

EDS-3450 A 6/25/2014 ROLLS-ROYCE ALLISON 250 ENGINE MAINTENAN PUBLISHED

EDS-3451 L 9/1/2012 AE3007A ENGINE CONTROL SYSTEM SOFTWARE R PUBLISHED

40

Specification


EDS-3454 2/26/1999 MGT SENSOR PUBLISHED

EDS-3455 G 8/14/2003 SOFTWARE SPECIFICATION FOR THE ELECTRONI PUBLISHED

EDS-3456 C 8/6/2001 SYSTEM SPEC FOR THE DIGITAL CONTROL FOR PUBLISHED

EDS-3457 10/20/1999 COALESCING FILTER FOR 501-KB7 BLEED AIR PUBLISHED

EDS-3459 A 10/3/2001 VALVE, ASSEMBLY, BOOST COMPRESSOR BLEED PUBLISHED

EDS-3461 8/20/1999 PROPELLER ELECTRICAL INTERFACE SPEC. PUBLISHED

EDS-3462-CS C 12/10/2001 AE3007 DESIGN CRITERIA PUBLISHED

EDS-3463 L 9/27/2016 AE3007 FUNCTIONAL INTERFACE CONTROL DOCU PUBLISHED

EDS-3464 B 9/17/2001 SYSTEM VERIFICATION CASES AND PROCEDURES PUBLISHED

EDS-3466 C 10/27/2009 HYDROMECHANICAL UNIT PUBLISHED

EDS-3467 C 7/6/2010 HYDROMECHANICAL UNIT PUBLISHED

EDS-3468 D 11/4/2009 HYDROMECHANICAL UNIT PUBLISHED

EDS-3470 1/17/2001 THERMOCOUPLE, TURBINE, MGT PUBLISHED

EDS-3471 A 12/17/1999 OIL PRESSURE/TEMPERATURE SENSOR PUBLISHED

EDS-3472 A 9/7/2001 SYSTEM VERIFICATION CASES AND PROCEDURES PUBLISHED

EDS-3473 11/10/1999 MODEL A50LF LIFTFAN FAN INLET TEMPERATUR PUBLISHED

EDS-3475 B 4/16/2008 WITNESS DRAIN BOX PUBLISHED

EDS-3476 D 6/22/2009 CRITICAL PART CLASSIFICATION PUBLISHED

EDS-3477 B 10/19/2004 DIGITAL ELECTRONIC CONTROL ASSEMBLY PUBLISHED

EDS-3479 2/28/2000 VALVE ASSY, COMPRESSOR BLEED PUBLISHED

EDS-3481 4/7/2000 CONTROL HARDWARE SPECIFICATION FOR THE R PUBLISHED

EDS-3482 B 12/18/2006 FORWARD INNER DUCT ASSEMBLIES PUBLISHED

EDS-3483 9/11/2001 FUEL NOZZLE ASSEMBLY PUBLISHED

EDS-3484 A 5/10/2000 OIL PRESSURE/TEMPERATURE SENSOR PUBLISHED

EDS-3485 A 7/21/2000 WOODWARD COMBINED PT/PROP GOVERNOR PUBLISHED


EDS-3487 D 9/20/2006 FUEL COOLED OIL COOLER ASSEMBLY PUBLISHED

EDS-3488 11/9/2001 MANIFOLD AND TUBE ASSY CUSTOMER BLEED AI PUBLISHED

EDS-3489 A 3/15/2001 PROJECT REQUIREMENTS DOCUMENT PUBLISHED

EDS-3490 A 3/15/2001 DESIGN PRODUCT SPECIFICATION PUBLISHED

EDS-3492 8/23/2000 GENERIC REQUIREMENTS DOCUMENT-INTRODUCTI PUBLISHED

EDS-3493 12/15/2000 GENERIC REQUIREMENTS DOCUMENT-FUNCTIONAL PUBLISHED

41

Specification


EDS-3494 A 3/15/2001 GENERIC REQUIREMENTS DOCUMENT-AIRCRAFT F PUBLISHED

EDS-3495 A 3/16/2001 3.2.4 GENERIC REQUIREMENTS DOCUMENT-GEOM PUBLISHED

EDS-3496 7/12/2000 GENERIC REQUIREMENTS DOCUMENT-MASS PROPE PUBLISHED

EDS-3497 A 3/15/2001 GENERIC REQUIREMENTS DOCUMENT-STRUCTURAL PUBLISHED

EDS-3498 A 3/15/2001 GENERIC REQUIREMENTS DOCUMENT-SAFETY & A PUBLISHED

EDS-3499 7/13/2000 GENERIC REQUIREMENTS DOCUMENT-ENVIRONMEN PUBLISHED

EDS-3500 11/7/2000 GENERIC REQUIREMENTS DOCUMENT-ENGINE OPE PUBLISHED

EDS-3501 A 3/15/2001 GENERIC REQUIREMENTS DOCUMENT-UNIT COST PUBLISHED

EDS-3502 12/15/2000 SUB-SYSTEM REQUIREMENTS DOCUMENT-FAN-COM PUBLISHED

EDS-3503 3/16/2001 SUB-SYSTEM REQUIREMENTS DOCUMENT-COMBUST PUBLISHED

EDS-3504 12/15/2000 SUB-SYSTEM REQUIREMENTS DOCUMENT-TURBINE PUBLISHED

EDS-3505 12/15/2000 SUB-SYSTEM REQUIREMENTS DOCUMENT-TRANSMI PUBLISHED

EDS-3507 F 5/22/2008 CONTROL SYSTEM REQUIREMENTS SPECIFICATIO PUBLISHED

EDS-3508 E 6/15/2009 CONTROL SYSTEM REQUIREMENTS SPECIFICATIO PUBLISHED

EDS-3509 A 8/10/2001 CARBON CIRCUMFERENTIAL SEAL ASSEMBLIES F PUBLISHED


EDS-3512 10/9/2000 VALVE, ASSEMBLY, BOOST COMPRESSOR BLEED, PUBLISHED

EDS-3513 10/9/2000 VALVE, ASSEMBLY, BOOST COMPRESSOR BLEED, PUBLISHED

EDS-3518 J 6/26/2018 FUEL PUMP & METERING UNIT PUBLISHED

EDS-3519 B 9/17/2001 COMPRESSOR ACCELERATION BLEED VALVE ASSY PUBLISHED

EDS-3520 A 2/19/2003 TURBINE INLET TEMPERATURE (T.I.T.) THERM PUBLISHED

EDS-3521 7/26/2001 PROJECT REQUIREMENTS DOCUMENT PUBLISHED

EDS-3522 5/4/2001 INTERFACE CONTROL DOCUMENT PUBLISHED


EDS-3524 A 5/31/2012 COMMON GAS FUEL METERING VALVE PUBLISHED


EDS-3526-CS 1/17/2001 DESIGN CRITERIA PUBLISHED

EDS-3527-CS 1/17/2001 DESIGN REQUIREMENTS PUBLISHED

EDS-3529 6/18/2001 PROJECT REQUIREMENTS DOCUMENT, AE3007 RE PUBLISHED

EDS-3532 B 3/28/2001 501-K LIGHTWEIGHT SHIPPING CONTAINER PUBLISHED

EDS-3533 G 8/1/2008 CONTROL SYSTEM CONCEPT PUBLISHED

EDS-3534 F 6/15/2009 CONTROL SYSTEM CONCEPT PUBLISHED

42

Specification


EDS-3535 B 4/19/2002 501-K LUBE / SCAVENGE OIL PUMP SPECIFICA PUBLISHED

EDS-3536 B 9/26/2007 CONNECTOR ADAPTER PUBLISHED

EDS-3537 A 4/26/2007 CARBON CIRCUMFERENTIAL SEAL ASSY FOR FRO PUBLISHED

EDS-3540 G 9/24/2020 FUEL PUMP AND METERING UNIT PUBLISHED

EDS-3544 3/17/2003 LOCAL OPERATING PANEL SPECIFICATION PUBLISHED

EDS-3546 C 6/11/2014 OIL TANK ASSY PUBLISHED

EDS-3547 8/12/2003 CLUTCH PLATE SPEC FOR F-135 LIFTFAN PGRM PUBLISHED

EDS-3551 2/20/2003 RIG CLUTCH ACTUATION SPECIFICATION PUBLISHED

EDS-3552 6/12/2003 LIFTFAN CLUTCH FLOW MEASUREMENT SYS SPEC PUBLISHED

EDS-3553 6/30/2003 RIG N3 SPEED SENSOR REQUIREMENTS PUBLISHED

EDS-3554 E 7/6/2005 Valve, Assembly, Boost Compressor Bleed, PUBLISHED

EDS-3555 2/12/2002 VALVE, COMPRESSOR BLEED CONTROL, 3-WAY PUBLISHED

EDS-3557-CS K 12/2/2008 SUB-SYSTEM REQUIREMENTS DOC-COMBUSTOR PUBLISHED

EDS-3558-CS K 12/2/2008 SUB-SYSTEM REQUIREMENTS DOCUMENT-TURBINE PUBLISHED

EDS-3559-CS M 8/14/2008 SUB-SYSTEM REQUIREMENTS DOCUMENT-GEARBOX PUBLISHED

EDS-3560-CS 6/24/2003 SUB- SYSTEM DESIGN DEFINITION DOCUMENT- PUBLISHED

EDS-3561-CS 6/24/2003 SUB- SYSTEM DESIGN DEFINITION DOCUMENT-T PUBLISHED

EDS-3566 E 8/28/2006 LUBE SYSTEM OIL TANK SPECIFICATION PUBLISHED

EDS-3567 G 5/18/2011 LUBE SYSTEM OIL PUMP SPECIFICATION PUBLISHED

EDS-3568 D 2/5/2008 LUBE SYSTEM FUEL COOLED OIL COOLER SPECI PUBLISHED

EDS-3569 C 6/29/2006 LUBE SYSTEM FILTER SPECIFICATION PUBLISHED

EDS-3570 G 4/12/2016 LUBE SYSTEM DIVERTER VALVE SPECIFICATION PUBLISHED

EDS-3571 B 6/29/2006 OIL SUPPLY PRESSURE / TEMP TRANSDUCER SP PUBLISHED

EDS-3572 A 4/6/2004 GRBX. SCAVANGE OIL TEMP. SENSOR SPEC PUBLISHED

EDS-3575 A 2/28/2006 GRBX. ROTATING AIR / OIL SEPERATOR PUBLISHED

EDS-3576 3/20/2003 INDICATING MAGNETIC PLUG PUBLISHED

EDS-3577 4/9/2002 601KB9/KC9 IGNITION EXCITER PUBLISHED

EDS-3578 A 4/17/2002 LIQUID FUEL PUMP PUBLISHED

EDS-3581 B 10/1/2002 QUAD ELEMENT FAN SPEED SENSOR PUBLISHED

EDS-3582 C 12/21/2006 COMPRESSOR ACCELERATION BLEED VALVE ASSE PUBLISHED

EDS-3584 A 12/19/2011 LIFTFAN DRIVESHAFT COMPONENT SPECIFICATI PUBLISHED

EDS-3585 B 4/1/2005 Supplier Deliverable Requirements in Response to Envelope Drawings PUBLISHED

43

Specification


EDS-3586 D 3/9/2016 CONTROL SYS. SPEC. FOR THE CTS800-4N TUR PUBLISHED

EDS-3587 D 3/9/2016 ENNGINE CONTROL AND INDICATING SYSTEM IN PUBLISHED

EDS-3591 9/20/2002 COMBUSTION LINER DURIBILITY PROGRAM PUBLISHED

EDS-3592 7/16/2010 JSF CARBON SEAL ASSEMBLIES FOR CLUTCH PUBLISHED

EDS-3593 C 5/24/2007 NOZZLE ASSY, FUEL PUBLISHED

EDS-3595 4/28/2003 LIFTFAN CLUTCH ACTUATION PUBLISHED

EDS-3596 K 5/22/2020 CLUTCH CONTROL SOFTWARE REQUIREMENTS PUBLISHED

EDS-3597 A 12/16/2002 PROJ. REQ. DOC. FOR LP GENERATOR DEMONST PUBLISHED

EDS-3598 H 10/21/2015 GROUND MAINTENANCE TERMINAL SYSTEM REQUI PUBLISHED

EDS-3601 A 1/16/2013 NOZZLE ASSY, FUEL PUBLISHED

EDS-3602 B 1/16/2013 NOZZLE ASSY, FUEL PUBLISHED

EDS-3603 11/6/2003 FADEC HARDWARE REQUIREMENTS PUBLISHED

EDS-3604 C 6/4/2020 IGNITION EXCITER PUBLISHED

EDS-3606-CS B 1/25/2011SSRD-PROPULSION SYSTEM CONTROL MONITORING AND MAINTENANCE

SYSTEM PUBLISHED

EDS-3606CS A 12/13/2005 T56-A-427 PROPULSION SYSTEM CONTROL, MON PUBLISHED

EDS-3607-CS E 5/27/2010 FUNCTIONAL INTERFACE CONTROL DOCUMENT PUBLISHED

EDS-3608 6/30/2003 FLIGHT N3 SPEED SENSOR REQUIREMENTS PUBLISHED

EDS-3610 10/28/2003 VALVE ASSY, BLEED COMPRESSOR DISCHRG PUBLISHED

EDS-3612 5/20/2005 BEARING ASSEMBLY, SPHERICAL-FLANGED PUBLISHED

EDS-3614 B 2/24/2009 GROUND MAINTENANCE TERMINAL SYS. REQUIRE PUBLISHED

EDS-3615 C 5/19/2009 CONT SYS SPEC FOR CTS800-4K TRBOSHFT PUBLISHED

EDS-3616 C 4/12/2016 INTERFACE CONTROL DOCUMENT PUBLISHED

EDS-3619 12/10/2003 SWITCH, LOW OIL PRESSURE PUBLISHED

EDS-3623-CS D 8/30/2016 PROJECT REQUIREMENT DOCUMENT PUBLISHED

EDS-3624-CS A 10/10/2011 SUB-SYSTEM REQUIREMENTS DOCUMENT - CONTROLS PUBLISHED

EDS-3629 B 9/30/2004 ATGS SHOCK MOUNTS PUBLISHED

EDS-3633 5/6/2004 BELLOWS ASSY, CUSTOMER BLEED SERVICES PUBLISHED

EDS-3634 C 3/14/2016 LIFTFAN CLUTCH FLIGHT ACTUATION SPEC PUBLISHED

EDS-3635 1/21/2004 HYDRAULIC POWER UNIT SPECIFICATION PUBLISHED

EDS-3636 A 3/15/2004 BUSINESS REQUIREMENT DOCUMENT, REQUIREME PUBLISHED

EDS-3641 F 8/5/2013 LIFTFAN CLUTCH FLOW MEASUREMENT SYSTEM PUBLISHED

44

Specification


EDS-3650 A 6/29/2006 OIL SUPPLY PRESSURE TRANSDUCER SPECIFICA PUBLISHED

EDS-3651 B 8/31/2010 JSF VAVBN ELECTRICAL HARNESS ASSEMBLY PUBLISHED

EDS-3652 B 1/14/2008 INITIAL FLIGHT REL N3 SPEED SENSOR REQ PUBLISHED

EDS-3654 H 6/4/2015 PCMU HARDWARE REQUIREMENTS PUBLISHED

EDS-3655 J 9/26/2011 AIRBORNE ENGINE CONTROL AND MONITORING S PUBLISHED

EDS-3656 J 12/10/2010 T56 AIRBORNE CONTROL SOFTWARE REQUIREMEN PUBLISHED

EDS-3657-CS G 5/14/2010 SUB-SYSTEM DEFINITION DOCUMENT PUBLISHED

EDS-3661 E 12/10/2010 T56 AIRBORNE EMS SOFTWARE REQUIREMENTS S PUBLISHED

EDS-3662 A 10/4/2005 AIR/OIL SEPARATOR ASSY, DESIGN, FAB-TEST PUBLISHED

EDS-3663 F 7/13/2018 FUEL PUMP AND METERING UNIT PUBLISHED

EDS-3664 D 10/4/2011 ENGINE MONITORING SYSTEM GROUND STATION PUBLISHED

EDS-3666 A 2/9/2007 MULTI FUNCTIONAL OIL SERVICE ADAPTER PUBLISHED

EDS-3668 C 11/6/2008 COMPRESSOR INLET TEMPERATURE SENSOR PUBLISHED

EDS-3670 D 6/27/2007 CHIP DETECTOR PUBLISHED

EDS-3671 D 6/27/2007 DUAL OIL PRESSURE TRANSDUCER PUBLISHED

EDS-3672 E 1/15/2020 ELECTRICAL HARNESS ASSEMBLY PUBLISHED

EDS-3675 12/10/2004 ENGINE MONITORING SYSTEM GROUND STATION PUBLISHED

EDS-3677CS B 8/9/2005 T56 AHE ENG MONITORING SYS GROUND STATIO PUBLISHED


EDS-3679 E 7/22/2014 VIBRATION DELECTION SENSING UNIT SPEC PUBLISHED

EDS-3685 2/2/2005 AE 3007 M1 ENGINE CONTROL SYSTEM REQUIRE PUBLISHED

EDS-3686 2/2/2005 AE 3007M1 FUNCTIONAL INTERFACE CONTROL D PUBLISHED

EDS-3687 2/2/2005 AE 3007M1 ENGINE CONTROL SOFTWARE REQUIR PUBLISHED

EDS-3688 2/2/2005 AE 3007M1 ENGINE CONTROL SOFTWARE REQUIR PUBLISHED

EDS-3709-CS A 12/16/2004 PRODUCT REQUIREMENTS DOCUMENT (PRD) PUBLISHED

EDS-3710-CS 2/4/2005 HP COMPRESSOR SUBSYSTEM DEFINITION DOCUM PUBLISHED

EDS-3713-CS A 5/1/2006 CLUTCH SUB-SYSTEM REQUIREMENT DOCUMENT PUBLISHED

EDS-3714-CS A 5/1/2006 LUBE SUB-SYSTEM REQUIREMENT DOCUMENT PUBLISHED

EDS-3715-CS 5/1/2006 GEARBOX SUB SYSTEM REQUIREMENT DOCUMENT PUBLISHED

EDS-3716-CS A 5/1/2006 VAVBN SUB-SYSTEM REQUIREMENT DOCUMENT PUBLISHED

EDS-3717-CS A 5/1/2006 DRIVESHAFT SUB-SYSTEM REQUIREMENT DOCUME PUBLISHED

EDS-3718-CS 2/1/2005 ENGINE INSTALLATION & EXTERNALS SUBSYSTE PUBLISHED

45

Specification


EDS-3719-CS 2/4/2005 SUBSYSTEM DEFINITION DOCUMENT (SSDD) - R PUBLISHED

EDS-3720-CS 2/1/2005 ADVANCED HAWKEYE INTEGRATION REQUIREMENT PUBLISHED

EDS-3725-CS A 6/3/2005 SUBSYSTEM REQUIREMENTS DOCUMENT (SSRD) - PUBLISHED

EDS-3726 6/16/2005 ANTI-VIBRATION TRAY FOR PCMU PUBLISHED

EDS-3729 4/18/2005 THERMOCOUPLE RESISTANCE TESTER MULTI-VOL PUBLISHED

EDS-3732 9/19/2005 BUSINESS REQUIREMENTS DOCUMENT (BRD) PUBLISHED

EDS-3732-CS B 8/8/2005 BUSINESS REQUIREMENTS DOCUMENT PUBLISHED

EDS-3733CS A 8/8/2005 PRODUCT REQUIREMENTS DOCUMENT PUBLISHED

EDS-3735 B 4/19/2012 PUMP ASSEMBLY, LUBE & SCAVENGE - MAIN PO PUBLISHED

EDS-3736-CS B 4/11/2007 PRODUCT REQUIRMENT - TURBOSHAFT PUBLISHED

EDS-3737-CS 8/11/2006 SSRD - COMPRESSOR PUBLISHED

EDS-3738-CS A 9/19/2008 SSRD- POWER AND ACCESSORY GEARBOX PUBLISHED

EDS-3739-CS 8/11/2006 SSRD - TURBINE PUBLISHED

EDS-3740-CS 4/10/2006 SUB-SYSTEM REQUIREMENTS DOC - CONTROLS & PUBLISHED

EDS-3741-CS A 4/12/2007 SSRD - COMBUSTOR PUBLISHED

EDS-3742 A 9/18/2006 SPEED/TORQUE SENSING PUBLISHED

EDS-3743 A 11/21/2011 PUMP ASSEMBLY, MAIN REDUCTION GEARBOX PUBLISHED

EDS-3753-CS 10/26/2005 BUSINESS REQUIREMENTS DOCUMENT (BRD) PUBLISHED

EDS-3758-CS 5/26/2006 PRODUCT REQUIREMENTS DOCUMENT PUBLISHED

EDS-3761 A 3/22/2006 FILM RIDING FACE SEAL-VAPOR PHASE BEARIN PUBLISHED

EDS-3763 12/13/2005 COMPLIANT FOIL AIR BEARING PUBLISHED

EDS-3764 C 8/15/2011 OIL TANK ASSEMBLY PUBLISHED

EDS-3797 10/5/2006 Lubricant Pre-Heater PUBLISHED

EDS-3798-CS A 5/31/2006 SSRD-RAM BURNER ASSEMBLY & HiSTED WHOLE PUBLISHED

EDS-3800 A 8/22/2006 ONCE PER REV (OPR)PROBE SENSOR PUBLISHED

EDS-3801 C 6/18/2008 VALVE ASSY, NORMALLY OPEN PUBLISHED

EDS-3805 A 3/8/2007 FUEL NOZZLE ASSY PUBLISHED

EDS-3806 3/8/2007 FUEL NOZZLE ASSY PUBLISHED





46

Specification


EDS-3813 A 5/24/2011 FUEL NOZZLE ASSEMBLY PUBLISHED


EDS-3831-CS 3/21/2003 RIG 648, BUILD 24 PRODUCT REQUIREMENTS D PUBLISHED

EDS-3832-CS 10/24/2006 SUBSYSTEM DEFINITION DOCUMENT FOR EXPAND PUBLISHED

EDS-3833 A 1/12/2007 ENGINE SCAVENGE FILTER ASSEMBLY PUBLISHED

EDS-3836 A 7/29/2009 GEARBOX SYSTEM AIR-OIL SEPARATOR REQ PUBLISHED

EDS-3839 9/22/2006 STARTER FUEL NOZZEL ASSEMBLY PUBLISHED

EDS-3840 A 1/5/2011 CIP SENSOR (P2) PUBLISHED

EDS-3841 E 10/14/2015 ENGINE MONITORING UNIT PUBLISHED

EDS-3842 A 1/5/2007 PRESSURE TRANSDUCER REQUIREMENTS PUBLISHED

EDS-3843 A 12/19/2011 P2.5 ABSOLUTE PRESSURE TRANSDUCER PUBLISHED

EDS-3844 11/21/2006 OIL TEMPERATURE SENSOR REQUIREMENT PUBLISHED

EDS-3845 B 1/11/2008 CONTROL ASSY, GAS PRODUCER - FUEL PUBLISHED

EDS-3847 A 12/8/2006 SPEED SENSOR REQUIREMENTS PUBLISHED

EDS-3851 2/15/2007 CONTROL SYSTEM SPEC PUBLISHED

EDS-3852 4/16/2007 VARIABLE GUIDE VANE ACTUATOR HARDWARE SP PUBLISHED

EDS-3853 E 8/26/2009 IGNITER PLUG ASSEMBLY PUBLISHED



EDS-3880 9/27/2006 Air Starter Control Valve PUBLISHED

EDS-3881 10/26/2006 FILTER ASSY, FUEL - HIGH PRESSURE PUBLISHED

EDS-3883 A 9/30/2011STARTER-GENERATOR, QAD FLANGE, CLAMP AND REGULATOR

SPECIFICATION PUBLISHED

EDS-3884-CS 7/31/2008 BUSINESS REQUIREMENTS DOCUMENT-AE3007A2 PUBLISHED

EDS-3885-CS A 9/16/2011 BUSINESS REQUIREMENTS DOCUMENT (BRD) PUBLISHED

EDS-3889 B 8/23/2010 SWITCH, PGB OIL PRESSURE SWITCH PUBLISHED

EDS-3890 B 8/23/2010 SWITCH, LOW OIL PRESSURE PUBLISHED

EDS-3891-CS 5/8/2008 BRD - BLOCK-3 HPT TURBINE UPGRADE PUBLISHED

EDS-3892-CS A 1/27/2009 PRODUCT REQUIREMENTS DOCUMENT (PRD) PUBLISHED

EDS-3896-CS 4/11/2007 SUB-SYSTEM DEFINITION DOCUMENT-RATTLRS PUBLISHED

EDS-3897 B 4/7/2008 PRODUCT REQUIREMENTS DOCUMENT PUBLISHED

EDS-3897-CS D 2/13/2010 SSDD - TRANSMISSIONS & STRUCTURES PUBLISHED

47

Specification


EDS-3899-CS 10/13/2008 SSRD - FAN & COMPRESSOR PUBLISHED

EDS-3900-CS A 4/2/2009 SSRD -COMBUSTION SYSTEM PUBLISHED

EDS-3901-CS 10/13/2008 TURNINE & EXHAUST MIXER PUBLISHED

EDS-3902 B 2/2/2007 STARTER-GENERATOR AND REGULATOR SPEC PUBLISHED

EDS-3903 B 10/12/2016 ANIT-ICE PRESSURE SWITCH REQUIRMENT PUBLISHED

EDS-3905-CS 10/21/2008 SSRD - POWER & ACCESSORY GEARBOX PUBLISHED

EDS-3907-CS 1/2/2007 SUB SYSTEM DEFINITION DOC - COMPRESSOR PUBLISHED

EDS-3911 G 10/14/2015 DATA DOWNLOAD RR300 ENGINE MONITORING UN PUBLISHED

EDS-3913-CS 10/13/2008 DESIGN PROD DEFINITION PUBLISHED

EDS-3914-CS B 2/13/2010 GRD - INTRODUCTION PUBLISHED

EDS-3915-CS B 2/13/2010 GRD - FUNCTIONALLY PUBLISHED

EDS-3916-CS 10/13/2008 GRD - AIRCRAFT FUNCTIONALLY COMPOTIBILIT PUBLISHED

EDS-3917-CS A 3/23/2009 GRD - GEOMETRY PUBLISHED

EDS-3918-CS A 3/23/2009 GRD - MASS PROPERTIES PUBLISHED

EDS-3920-CS A 3/23/2009 GRD - SAFETY & AVAILABITY PUBLISHED

EDS-3921-CS A 3/23/2009 GENERAL REQUIREMENTS DOCUMENT ENV IMPACT PUBLISHED

EDS-3922-CS 10/13/2008 GRD - ENGINE OPERATING COST PUBLISHED

EDS-3923-CS 10/13/2008 GRD - UNIT COST PUBLISHED

EDS-3924-CS A 4/2/2009 SSRD - TRAMSMISSION STRUCTURES & EXTERNA PUBLISHED

EDS-3925-CS 10/13/2008 SSRD - CONTROLS PUBLISHED

EDS-3933-CS B 1/18/2011 PRODUCT REQUIREMENTS DOCUMENT (PRD) PUBLISHED

EDS-3935-CS 3/26/2008 SUB-SYS DEFINITION DOC (SSDD) CONTROLS AND EXTERNALS PUBLISHED

EDS-3937-CS 7/17/2008 PRODUCT DEFINITION DOCUMENT (PDD) PUBLISHED


EDS-3941 B 9/21/2016 FUEL NOZZLE ASSEMBLY PUBLISHED

EDS-3942 B 6/23/2016 M250 SHIPPING CONTAINER PUBLISHED

EDS-3945 5/27/2008 DDG-1000 ATG AUTO VOLTAGE REGULATOR PUBLISHED

EDS-3953 9/25/2007 INTERFACE CONTROL DOCUMENT -WHOLE ENGINE PUBLISHED

EDS-3954 9/25/2007 ICD - POWERPLANT SUB-SYSTEM PUBLISHED

EDS-3955 9/25/2007 ICD - CONTROL SUB-SYSTEM PUBLISHED

EDS-3956-CS 9/25/2007 AIRCRAFT - IRD PUBLISHED

EDS-3970-CS 1/15/2009 DESIGN PRODUCT SPECIFICATION PUBLISHED

48

Specification


EDS-3971-CS 9/15/2008 ICD -WHOLE ENGINE PUBLISHED

EDS-3972-CS 9/15/2008 ICD - POWERPLANT SUB-SYSTEM PUBLISHED

EDS-3973-CS 9/15/2008 ICD - CONTROM SUB-SYSTEM PUBLISHED

EDS-3974-CS B 1/18/2011 IRD- AIRCRAFT PUBLISHED

EDS-3977 12/5/2007 SSDD TURBINE PUBLISHED

EDS-3978-CS A 2/25/2008 BUSINESS REQUIREMENT DOCUMENTS PUBLISHED

EDS-3979-CS D 4/16/2012 PRODUCT REQUIREMENTS DOCUMENT PUBLISHED

EDS-3980-CS B 11/17/2011 SUB-SYSTEM REQUIREMENTS DOCUMENT-TURBINE PUBLISHED

EDS-3981-CS B 11/19/2011 SUB-SYSTEM REQUIREMENTS DOCUMENT-COMPRES PUBLISHED

EDS-3982-CS 3/23/2012 SUB-SYSTEM DEFINITION DOCUMENT-TURBINE PUBLISHED

EDS-3983-CS 2/13/2012 SUB-SYSTEM DEFINITION DOCUMENT-COMPRESSOR PUBLISHED

EDS-3986 9/14/2007 FULL AUTHORITY DIGITAL ELECTRONIC CONTROL - HARDWARE PUBLISHED

EDS-3988 3/13/2009 MTG GENERATOR DESIGN SPECIFICATION PUBLISHED

EDS-3989 4/10/2008 MTG GENERATOR LUBE OIL COOLER PUBLISHED

EDS-3990 G 3/7/2018 VALVE, ANTI-ICING AIR PUBLISHED

EDS-4004 8/27/2010 Accessory Gearbox Mount Link Assembly PUBLISHED

EDS-4012-CS 10/13/2008 SSRD - FAN PUBLISHED

EDS-4018 4/3/2008 MTG GAS TURBINE LUBE OIL COOLER PUBLISHED

EDS-4021-CS A 3/18/2009 SSRD - E4 FADEC SOFTWARE PUBLISHED

EDS-4023-CS 2/9/2009 SSDD- TURBINES PUBLISHED

EDS-4028-CS C 11/15/2010 INTERFACE CONTROLS DOCUMENT (ICD) PUBLISHED

EDS-4029 C 12/19/2011 CONTROL SYSTEM TEQUIREMENTS PUBLISHED

EDS-4030-CS 12/20/2007 PRODUCT REQUIREMENTS DOCUMENT (HEETE) PUBLISHED


EDS-4033 B 4/11/2011STARTER-GENERATOR AND REGULATOR WITH AND WITHOUT INLET DUCT

COVER PUBLISHED

EDS-4039-CS A 12/14/2010 BUSINESS REQUIREMENTS DOCUMENT (BRD) PUBLISHED

EDS-4040-CS 5/8/2008 WRD - AE2100 BLOCK-3 ENGINE UPDATE PUBLISHED

EDS-4042-CS 5/8/2008 IRD - AE2100D BLOCK-3 ENGINE UPGRAGE PUBLISHED

EDS-4043-CS 9/3/2010 AE2100 BLOCK III ENGINE UPGRADE PUBLISHED

EDS-4044-CS A 1/26/2009 SSRD - AE2100 BLOCK-3 HPT UPGRADE PUBLISHED

EDS-4046-CS 5/8/2008 INTERFACE DEFINITION DOCUMENT AE2100D3 PUBLISHED

49

Specification


EDS-4047 6/2/2008 MT30 LOW PRESSURE WATER WASH SYSTEM PUBLISHED

EDS-4048-CS 4/3/2008 SUB SYS REQUIREMENT DOC - OFF BOARD EHMS PUBLISHED

EDS-4049 D 10/14/2015 ENGINE CONTROL SYSTEM REQUIREMENTS PUBLISHED

EDS-4050 G 3/9/2016 ICD - ENGINE CONTROL AND INDICATING SYS PUBLISHED

EDS-4051 E 10/14/2015 ENGINE CONTROL SYSTEM REQUIREMENTS PUBLISHED


EDS-4053-CS A 10/13/2008 SSDD - TRANSMISSION & STRUCTURES PUBLISHED

EDS-4054-CS D 10/6/2011 PRODUCT REQUIREMENT DOCUMENT TURBOSHAFT PUBLISHED

EDS-4056-CS A 9/16/2009 SSRD - TRANSMISSIONS & STRUCTURES PUBLISHED

EDS-4059-CS A 10/6/2010 SUB-SYS REQUIREMENTS DOC (SSRD)- EXTERNALS PUBLISHED

EDS-4060-CS 10/13/2008 SSDD - TURBINE PUBLISHED

EDS-4062-CS A 3/30/2012 PRODUCT DEFINITION DOCUMENT (PDD) PUBLISHED

EDS-4063-CS 8/14/2012 Sub-System Definition Document (SSDD) - PUBLISHED

EDS-4064-CS A 3/21/2012 SUB-SYSTEM DEFINITION DOCUMENT-TRANSISSIONS & STRUCTURES PUBLISHED

EDS-4065-CS 5/25/2012 SUB-SYSTEM DEFINITION DOCUMENT-TURBINE PUBLISHED

EDS-4067-CS 5/4/2011 SSDD-EXTERNALS PUBLISHED

EDS-4068-CS A 4/8/2010 SSDD - COMPRESSOR PUBLISHED

EDS-4069-CS A 3/30/2009 SSDD - COMBUSTOR PUBLISHED

EDS-4070-CS 10/13/2008 PDD - AE3007A2 PUBLISHED

EDS-4071-CS 10/3/2008 AE3007A2 WORKING RELATIONSHIP DOCUMENT PUBLISHED

EDS-4072 4/30/2008 DDG-1000 MTG GAS TURBINE FUEL RECIRCULATION COOLER PUBLISHED

EDS-4081-CS A 3/12/2009 PRODUCT REQUIREMENTS DOC TURBOPROP PUBLISHED


EDS-4111 7/17/2008 CIP SENSOR (P2) PUBLISHED


EDS-4113-CS A 8/18/2011 DLE COMBUSTION SYSTEM (SSRD) PUBLISHED

EDS-4117-CS 10/13/2008 SSDD - MIXER PUBLISHED

EDS-4118-CS A 1/18/2011 SSRD - TRANSMISSIONS & STRUCTURES PUBLISHED

EDS-4119 B 4/26/2011 AUXILIARY SCAVENGE PUMP ASSEMBLY PUBLISHED

EDS-4123-CS 8/17/2009 SUB-SYSTEM REQUIREMENTS DOCUMENT CONTROL PUBLISHED

EDS-4124-CS B 1/18/2011 SSRD - COMBUSTION PUBLISHED

EDS-4125-CS A 8/2/2011 SUB-SYSTEM DEFINITION DOCUMENT (SSDD)-COMBUSTOR PUBLISHED

50

Specification


EDS-4126-CS A 9/8/2011 SUB-SYSTEM DEFINITION DOCUMENT-COMPRESSOR PUBLISHED

EDS-4127-CS A 1/18/2011 (SSRD) TURBINE & EXHAUST MIXER PUBLISHED

EDS-4128-CS A 9/8/2011 SUB-SYSTEM REQUIREMENTS DOCUMENT - FAN PUBLISHED

EDS-4129-CS B 9/7/2011 SSRD - TURBINE PUBLISHED

EDS-4130-CS A 1/18/2011 SSRD - FAN & COMPRESSOR PUBLISHED

EDS-4131-CS 4/6/2009 SSDD - TRANSMISSIONS & STRUCTURES PUBLISHED

EDS-4132-CS B 1/18/2011 SSRD - CONTROLS PUBLISHED


EDS-4134-CS B 3/16/2011 SUB-SYSTEM REQUIREMENTS DOCUMENT CONTROL PUBLISHED

EDS-4138 D 11/2/2015 CONTROL ASSEMBLEY, GAS PRODUCER- FUEL PUBLISHED

EDS-4139 12/1/2008 VIBRATION DETECTOR-ACCELEROMETER PUBLISHED

EDS-4140-CS 9/18/2009 SSDD- CONTRON SYSTEM PUBLISHED

EDS-4141-CS A 3/30/2012 CONTROL SYSTEM SPEC - TURBOSHAFT PUBLISHED

EDS-4143-CS A 6/24/2009 PRODUCT REQUIREMENT DOC T129 ATAK PROG PUBLISHED

EDS-4145-CS 1/28/2011 CONTROL SYSTEM SPEC - TURBOPROP PUBLISHED

EDS-4148 8/23/2012 CLUTCH PLATE SPECIFICATION PUBLISHED

EDS-4150-CS A 5/31/2011 WRD PUBLISHED

EDS-4153-CS A 5/31/2011 SSDD-BAMS ACCESSORY GEARBOX & INTERMEDIATE GEARBOX PUBLISHED

EDS-4156 2/17/2009 COMPLIANT FOIL AIR BEARING WITH METAL SNUBBERS PUBLISHED

EDS-4158 A 1/26/2012 ACCELEROMETER ASSEMBLY PUBLISHED

EDS-4159-CS 2/9/2009 SSDD EXHAUST COLLECTOR PUBLISHED

EDS-4160 4/14/2009 SSDD - MIXER PUBLISHED

EDS-4163 7/1/2009 FUEL CHECK VALVE ASSEMBLY PUBLISHED

EDS-4164 F 1/5/2011 OIL PRESSURE/TEMP TRANSLATIONAL SENSOR PUBLISHED

EDS-4165-CS B 6/13/2014 BUSINESS REQUIREMENTS DOCUMENT PUBLISHED

EDS-4169 9/28/2009 IGNITION SYSTEM HARDWARE PUBLISHED

EDS-4171 A 7/29/2009 GEARBOX SYS LIP SEAL REQUIREMENTS PUBLISHED

EDS-4172-CS 9/9/2009 INTERGRATED REQUIREMENTS DOCUMENT PUBLISHED

EDS-4183 A 3/21/2012 CONTROL ASSEMBLY, GAS PRODUCER - FUEL PUBLISHED

EDS-4187 5/27/2011 PRESSURE TRANSDUCER REQUIREMENTS PUBLISHED

EDS-4188 8/10/2010 THEMOCOUPLE ASSEMBLIES WITH MULTIPLE INTEGRAL PROBES PUBLISHED

EDS-4190 C 5/31/2012 DRIVESHAFT SPECIFICATION PUBLISHED

51

Specification


EDS-4201 A 2/13/2012 ENGINE OIL SUPPLY FILTER ASSEMBLY PUBLISHED

EDS-4204-CS 9/18/2009 SSDD- CONTRON SYSTEM PUBLISHED

EDS-4211-CS 6/9/2010 DRIVESHAFT MEASUREMENT SYSTEM SPECIFICATION PUBLISHED

EDS-4213 D 6/25/2014 ELECTRICAL HARNESS ASSEMBLY PUBLISHED

EDS-4214-CS 6/22/2010 (SSRD)- SMALL GAS TURBINE FADEC CONTROL SYSTEM PUBLISHED

EDS-4215-CS 6/22/2010 SSRD - SMALL GAS TURBINE FADEC CONTROL S PUBLISHED

EDS-4216-CS 6/22/2010 SSRD - SMALL GAS TURBINE FADEC CONTRL SY PUBLISHED

EDS-4217 B 6/21/2016 COVER, ENGINE SHIPPING PUBLISHED

EDS-4219-CS 11/16/2010 SUB-SYS REQUIREMENTS DOCUMENT PUBLISHED


EDS-4226 D 3/21/2011 CLUTCH CASE RTD TEMPERATURE SENSOR REQUIREMENTS PUBLISHED

EDS-4227-CS 6/15/2010 Sub-System Requirements Document (SSRD) PUBLISHED

EDS-4228 E 7/7/2014 M250 ENGINE SCAVENGE FILTER ASSEMBLY PUBLISHED

EDS-4230 9/2/2010 ENGINE EXHAUST NOZLE DESIGN PUBLISHED

EDS-4235-CS 9/28/2010 Product Requirements Document (PRD) PUBLISHED


EDS-4237 7/23/2012 RR500 ENGINE MONITOR UNIT PUBLISHED

EDS-4238-CS 4/4/2011 SUB-SYS REQUIREMENTS DOCUMENT-TURBINES PUBLISHED

EDS-4239-CS 1/19/2011 CONTROL SYS SPEC SMALL GAS TURB FADEC PUBLISHED

EDS-4240-CS 1/19/2011CONTROL SYSTEM SPECIFICATION (CSS)-SMALL GAS-TURBINE FADEC (SGTF)

CONTROL SYSTEMPUBLISHED



EDS-4254-CS 5/18/2011 SUB-SYSTEM REQUIREMENTS DOCUMENT(SSRD)- INSTALLATIONS PUBLISHED

EDS-4255-CS 5/18/2011 SUB-SYSTEM REQUIREMENTS DOCUMENT (SSRD) - COMBUSTION PUBLISHED

EDS-4256-CS 5/18/2011 SUB-SYSTEM REQUIREMENTS DOCUMENT - CONTROLS PUBLISHED

EDS-4257-CS 5/18/2011 SUB-SYSTEM REQUIREMENTS DOCUMENT - FAN AND COMPRESSOR PUBLISHED

EDS-4258-CS 5/18/2011SUB-SYSTEM REQUIREMENTS DOCUMENT(SSRD) tRANSMISSION AND

STRUCTURES- PUBLISHED

EDS-4259-CS 5/18/2011 SUB-SYSTEM REQUIREMENTS DOCUMENT(SSRD)- TURBINE PUBLISHED

EDS-4260-CS 5/18/2011 INTEGRATED REQUIREMENTS DOCUMENT (IRD) PUBLISHED

EDS-4262-CS 1/28/2011 SSDD- SMALL GAS TURBINE FADEC CONTROL SY PUBLISHED

52

Specification


EDS-4263-CS 1/28/2011 SSDD- SMALL GAS TURBINE FADEC CONTROL SY PUBLISHED

EDS-4265-CS B 4/19/2012 PRODUCT REQUIREMENTS DOCUMENT (PRD) PUBLISHED

EDS-4268-CS 3/25/2011 PRODUCT REQUIREMENTS DOCUMENT (PRD)-UH-X PROGRAM PUBLISHED

EDS-4274-CS 9/27/2012 SUB-SYSTEM REQUIREMENTS DOCUMENT-TURBINE PUBLISHED

EDS-4275 4/12/2012 GENERAL COMPONENT REQUIREMENTS DOCUMENT (GCRD PUBLISHED

EDS-4276 4/12/2012SMALL GAS TURBINE FADEC (SGTF) PROJECT COMPONENT REQUIREMENTS

DO PUBLISHED

EDS-4277 C 5/17/2018SMALL GAS TURBINE FADEC (SGTF) ELECTRONIC ENGINE CONTROLLER (EEC)

COMPONENT REQUPUBLISHED

EDS-4278 A 7/3/2014SMALL GAS TURBINE FADEC (SGTF)FUEL PUMP AND POWER UNIT (FPPU)

COMPONENT REQUIREMPUBLISHED

EDS-4279 A 7/3/2014SMALL GAS TURBINE FADEC (SGTF) FUEL METERING UNIT (FMU)

COMPONENT REQUIREMENTS DPUBLISHED

EDS-4281 5/4/2011 SOFTWARE SPECIFICATION PUBLISHED

EDS-4284-CS A 9/23/2011 SSRD- ACCESSORY & INDTERMEDIATE GEARBOXE PUBLISHED

EDS-4285-CS 5/24/2011SUB-SYSTEM DEFINITION DOCUMENT (SSDD)-INSTALLATIONS AND

CONTROLS PUBLISHED

EDS-4286 A 8/21/2013 FUEL COOLED OIL COOLER ISOLATER PUBLISHED

EDS-4287-CS 9/27/2012 SSRD-COMBUSTOR PUBLISHED

EDS-4288-CS A 9/27/2012 SSRD - MECHANICAL SYSTEMS PUBLISHED

EDS-4289 4/13/2012SMALL GAS TURBINE FADEC (SGTF) COMBINATIION ANI-ICE VALVE (AIV)

COMPONENT REQUIRPUBLISHED

EDS-4292 A 6/25/2014SMALL GAS TURBINE FADEC (SGTF) TORQUEMETER OIL PRESSURE (TMOP)

COMPONENT REQUIREPUBLISHED

EDS-4293 A 6/25/2014SMALL GAS TURBINE FADEC (SGTF) MAIN OIL TEMPERATURE (MOP/MOT)

COMPONENT REQUIREMPUBLISHED

EDS-4294 A 6/25/2014SMALL GAS TURBINE FADEC (SGTF) NP SPEED COMPONENT REQUIRMENTS

DOCUMENT (CRD) PUBLISHED

EDS-4295 B 8/9/2013 SELF SEALING MAGNETIC CHIP COLLECTOR PUBLISHED

EDS-4296 A 8/23/2012HARDWARE REQUIREMENTS SPECIFICATION FOR THE 501-K SERIES DIGITAL

CONTROL PUBLISHED

53

Specification


EDS-4297 2/6/2012CONTROL ASSY, ELECTRONIC TEMPERATURE DATUM - BRAKE AND

BRAKELESS MODELS PUBLISHED

EDS-4299-CS 11/16/2011SUB-SYSTEM REQUIREMENTS DOCUMENT(SSRD)-TRANSMISSIONS AND

STRUCTURES PUBLISHED

EDS-4300 B 2/20/2017 Carbon Circumferential Seal Assemblies DESIGN, FABRICATION AND TEST PUBLISHED

EDS-4303-CS 10/13/2011SUB-SYSTEM REQUIREMENTS DOCUMENT(SSRD)- BAMS ACCESSORY

GEARBOX & INTERMEDIATE GEPUBLISHED

EDS-4304 A 11/26/2013 FULL AUTHORITY DIGITAL ELECTRONIC CONTROL HARDWARE PUBLISHED

EDS-4307 A 7/13/2013 SOLID STATE IGNITION RELAY PUBLISHED

EDS-4308 5/10/2012 SCAVENGE OIL PUMP SPECIFICATION PUBLISHED

EDS-4314 A 12/15/2014 FUEL PUMP METERING UNIT PUBLISHED

EDS-4317 B 3/13/2013 SPEED/ TORQUE SENSING PUBLISHED

EDS-4319 8/27/2012 ELECTRICAL HARNESS ASSEMBLY PUBLISHED

EDS-4325 10/3/2012 HIGH TEMPERATURE ELECTRICAL HARNESS ASS PUBLISHED

EDS-4343 A 9/12/2013 SGTF CONTROLS SYSTEM SPECIFICATION FOR B2.02 PUBLISHED

EDS-4344-CS 9/3/2013 SUB-SYSTEM DEFINITION DOCUMENT (SSDD)-SGTEF CONTROL SYSTEM PUBLISHED

EDS-4347 B 7/15/2016 VAVBM BEARING REQUIREMENTS PUBLISHED

EDS-4348-CS 1/28/2013 BUSINESS REQUIREMENTS DOCUMENT PUBLISHED

EDS-4349-CS 1/28/2013 BUSINESS REQUIREMENTS DOCUMENT PUBLISHED

EDS-4350 8/26/2013 Propeller Shaft Lip Seal Requirements PUBLISHED

EDS-4352 A 6/25/2014 Power Turbine Speed Pickup (NP) PUBLISHED





EDS-4357-CS 6/13/2013 System Definition Document (SSDD) - Co mbustor (AE 1107C) PUBLISHED

EDS-4359 5/28/2013 SUB-SYSTEM DEFINITION DOCUMENT (SSDD) PUBLISHED

EDS-4360 C 5/3/2015 AE 3007A, C H FADEC HARDWARE REQUIREMENTS PUBLISHED

EDS-4362-CS A 7/9/2014 SSRD - Compressor PUBLISHED

EDS-4364-CS A 7/3/2014 SSRD - Turbine PUBLISHED

EDS-4365-CS 5/12/2014 SUB-SYSTEM DEFINITION DOCUMENT(SSDD)-TURBINE PUBLISHED

EDS-4366-CS 11/20/2013 SSRD - Installations and Controls PUBLISHED

54

Specification


EDS-4371 B 11/6/2013 GAS FUEL METERING VALVE PUBLISHED

EDS-4376-CS B 3/23/2016 PRODUCT REQUIREMENTS DOCUMENT (PRD) FOR THE 501-KB8 ENGINE PUBLISHED

EDS-4379 A 11/7/2019 Engine Control System Requirements PUBLISHED

EDS-4380 A 11/7/2019 Engine Control System Requirements PUBLISHED

EDS-4381 B 3/18/2021 Functional Interface Control Document PUBLISHED

EDS-4381-CS A 11/7/2019 Functional Interface Control Document PUBLISHED

EDS-4382 A 10/29/2014 SELF-SEALIN MAGNETIC CHIP COLLECTOR PUBLISHED

EDS-4389-CS 6/12/2015 SUB-SYSTEM DEFINITION DOCUMENT (SSDD) -TURBINE PUBLISHED

EDS-4390-CS 6/12/2015PRODUCT REQUIREMENTS DOCUMENT (PDR) FOR AE2100D3 COST

REDUCTION PUBLISHED

EDS-4391-CS 5/12/2015 SUB-SYSTEM REQUIREMENTS DOCUMENT (SSRD) - TURBINE PUBLISHED

EDS-4392-CS 5/12/2015 SUB-SYSTEM REQUIREMENTS DOCUMENT (SSDR)- COMBUSTOR PUBLISHED

EDS-4393-CS 5/13/2015 SUB-SYSTEM REQUIREMENTS DOCUMENT (SSDR)-COMPRESSOR PUBLISHED

EDS-4394-CS 5/14/2015SUB-SYTEM REQUIREMENTS DOCUEMENT(SSRD)- POWER TRANSMISSION

SYSTEM AND EXTERNALS PUBLISHED

EDS-4395-CS 6/16/2015 SUB-SYSTEM DEFINITION DOCUMENT (SSDD) -TURBINE PUBLISHED

EDS-4396 A 10/9/2015 AE2100 COMMON ENGINE SHIPPING CONTAINER PUBLISHED

EDS-4405-CS 8/31/2016 Product Definition Document (PDD) PUBLISHED

EDS-4407 11/22/2016 LUBE SYSTEM DIVERTER VALVE PUBLISHED

EDS-4415 A 9/18/2017 ACCELEROMERTER ASSEMBLY PUBLISHED

EDS-4417-CS 1/9/2018 Series 3.5 Temperature Match Product Requirements Document (PRD) PUBLISHED

EDS-4419-CS 12/27/2018 S3.5 Temperature Match C-130H Aircraft S PUBLISHED

EDS-4422 4/26/2019 TRANSITION DUCT SEAL DESIGN REQUIREMENTS PUBLISHED

EDS-4423 B 2/24/2021 High Voltage Electrical Harness Assembli PUBLISHED

EDS-4425 C 6/10/2021 Full Authority Digital Engine Control (FADEC) Card Assemblies PUBLISHED

EDS-4428 11/30/2020 Filter, Compressor Air Bleed PUBLISHED

EDS-4429-CS 9/21/2020 40kW ESG Bearings PUBLISHED

EDS-4430 3/11/2021 Roll Post V-Band Clamp Design Requiremen PUBLISHED

EDS-491 1/25/2008 SURFACE TREATMENT OF MAGNESIUM PUBLISHED

EDS-5001 A 2/3/1964 VENDOR ENGINEERING DATA FOR U.S. AIR FORCE PUBLISHED

EDS-5002 3/18/1963 VENDOR ENGINEERING DATA FOR U.S. NAVY PUBLISHED

EDS-5003 B 5/20/1966 VENDOR ENGINEERING DATA FOR US NAVY / 35 PUBLISHED

55

Specification


EDS-5004 A 12/6/1963 SPECIAL DATA CLAUSE FOR PURCHASE ORDERS PUBLISHED

EDS-5005 1/17/1964 SPECIAL DATA CLAUSE FOR PURCHASE ORDERS PUBLISHED

EDS-5006 A 1/17/1964 SPECIAL DATA CLAUSE FOR PURCHASE ORDERS PUBLISHED


EDS-5008 B 5/20/1966 VENDOR ENGINEERING DATA FOR U.S. AIR FOR PUBLISHED


EDS-5010 A 8/25/1967 VENDOR ENGINEERING DATA FOR U.S. ARMY PUBLISHED


EDS-5012 6/15/1966 DATA & RIGHTS REQUIREMENTS FOR PURCHASE PUBLISHED

EDS-5013 7/25/1966 VENDOR DATA REQUIREMENTS, XHM 1500 HP PUBLISHED

EDS-5014 A 6/14/1971 VENDOR ENGINEERING DATA FOR U.S. AIR FOR PUBLISHED

EDS-5015 10/16/1967 MILESTONE PLANNING & REPORTING PUBLISHED

EDS-5016 A 6/15/1970 VENDOR DATA REQUIREMENTS PUBLISHED

EDS-530 K 12/8/1955 PUMP ASSY - MAIN FUEL PUBLISHED

EDS-599 K 3/9/1955 NOZZLE ASSY - FUEL - DUPLEX GASOLINE PUBLISHED

EDS-625 B 6/28/1960 LEAD-HIGH TENSION PUBLISHED

EDS-634 C 11/7/1955 FUEL FILTER PUBLISHED

EDS-721 A 5/12/1952 SURFACE GAP IGNITER PLUG PUBLISHED

EDS-733 AB 4/19/2016 SUPPLIER ENGINEERING DATA & CHANGE CONTROL PUBLISHED

EDS-796 A 11/16/1955 HERMETICALLY SEALED RELAY PUBLISHED

EDS-802 B 7/3/2001 AIR GAP IGNITER PLUG PUBLISHED

EDS-895 E 11/14/1955 DUAL ELEMENT FUEL PUMP PUBLISHED

EDS-899 E 5/14/1993 OPERATED-HERMETICALLY SEALED IGNITION RE PUBLISHED

EDS-917 G 5/22/1959 COORDINATOR POTENTIOMETER ASSY. PUBLISHED

EDS-923 C 6/11/1963 VALVE ASSY, A/B FUEL THROTTLE PUBLISHED

EDS-925 B 11/7/1955 SOLENOID DEICE VALVE PUBLISHED

EDS-950 C 3/11/1959 PUMP-VARIABLE DELIVERY , HYDRAULIC PUBLISHED

EDS-954 D 9/15/1990 VALVE ASSEMBLY, FUEL ENRICHMENT SHUT-OFF PUBLISHED

EDS-960 A 3/23/1955 COMPRESSOR BLEED VALVE ASSEMBLY PUBLISHED

EDS-961 A 3/23/1955 COMPRESSOR BLEED VALVE CONTROL VALVE ASSEMBLY PUBLISHED

EDS-980 C 3/6/1958 INDICATOR, TORQUEMETER SENSITIVE PUBLISHED


56

Specification



EDS4319 8/27/2012 Electrical Harness Assembly PUBLISHED

EDT-500 35 4/17/2019 DRAWING INTERPRETATION PUBLISHED

EDT-501 4 12/4/1986 SURFACE TEXTURE PUBLISHED

EDT-502 4/22/1968 BLADES & VANES PUBLISHED

EDT-503 2 4/18/1979 CASTING DRAWINGS PUBLISHED

EDT-506 23 4/17/2019 EXPLANATION OF DRAWING TERMS PUBLISHED

EDT-510 3 2/21/2017 MODEL BASED DEFINITION INTERPRETATION PUBLISHED

EIS-1002 K 12/1/2008 MAGNETIC PARTICLE INSPECTION-LARGE ROLLER OR BALL BEARING RACES PUBLISHED

EIS-1003 M 12/1/2008 MAGNETIC PARTICLE INSPECTION-SMALL ROLLER OR BALL BEARING RACES PUBLISHED

EIS-1016 G 3/13/2020 MAGNETIC PARTICLE INSPECTION-TIE BOLTS PUBLISHED

EIS-1017 P 7/11/2016MAGNETIC PARTIICLE INSPECTION OF STUDS, BOLTS, LEVERS, CONTROL

LINKS, PINS, AND PUBLISHED

EIS-1030 G 5/12/2009 MAGNETIC PARTICLE INSPECTION - NUTS, WASHERS, BUSHINGS PUBLISHED

EIS-1035 F 12/1/2008 MAGNETIC PARTICLE INSPECTION - SPRINGS PUBLISHED

EIS-1040 G 12/1/2008 MAGNETIC PARTICLE INSPECTION-WELDED BRACKET ASSEMBLIES PUBLISHED

EIS-1042 F 12/1/2008MAGNETIC PARTICLE INSPECTION - BRACKETS FRABRICATED WITHOUT

WELDS PUBLISHED

EIS-1050 L 5/15/2019 MAGNETIC PARTICLE INSPECTION - COMPRESSOR WHEELS PUBLISHED

EIS-1051 A 12/1/2008 MAGNETIC PARTICLE INSPECTION J33 INDUCERS, FRONT AND REAR PUBLISHED

EIS-1070 N 12/1/2008 MAGNETIC PARTICLE INSPECTION-COMPRESSOR BLADES AND VANES PUBLISHED

EIS-1092 G 12/1/2008 MAGNETIC PARTICLE INSPECTION - COMPRESSOR WHEEL SPACER RINGS NON-CURRENT

EIS-1094 K 12/1/2008 MAGNETIC PARTICLE INSPECTION-PLANET GEAR CARRIERS, FRONT AND REAR PUBLISHED

EIS-1105 D 3/2/1959INCLUSION RATING INSPECTION OF ALLOY STEEL BARS, MECHANICAL

TUBING, AND FOR PUBLISHED

EIS-1110 C 4/30/1989 EDDY CURRENT INSPECTION BEARING COMPONEN PUBLISHED

EIS-1115 A 12/16/2014 EDDY CURRENT INSPECTION MODEL 250 CAST W PUBLISHED

EIS-1120 B 2/16/2016 INSPECTION PROCEDURE, EDY CURRENT-FOR CO PUBLISHED

EIS-1130 A 8/1/1986 FLUORESCENT PENETRANT INSPECTION TITANIU NON-CURRENT

57

Specification


EIS-1160 A 8/31/1995 FLUORESCENT PARTICLE INSPECTION OF CARBO NON-CURRENT

EIS-1163 B 8/31/1995 FLUORESCENT PENETRATION INSPECTION FOR NON-CURRENT

EIS-1164 D 8/31/1995 FLUORESCENT PENETRANT INSPECTION PORTABL NON-CURRENT

EIS-1168 J 10/21/1958 Fluorescent Penetrant Inspection Turbine PUBLISHED

EIS-1169 AG 5/10/2012 FLUORESCENT PENETRANT INSPECTION - GENER PUBLISHED

EIS-1185 G 8/31/1995 RADIOGRAPHIC INSPECTION OF FUSION WELDED NON-CURRENT

EIS-1187 A 2/24/1959 RADIOGRAPHIC INSPECTION OF FLASH WELDED PUBLISHED

EIS-1188 8/2/1966 ULTRASONIC INSPECTION OF ELECTRON BEAM PUBLISHED

EIS-1189 B 8/31/1995 ULTRASONIC INSPECTION PROCEDURE CYLINDER NON-CURRENT

EIS-1192 F 8/25/1981 ULTRASONIC INSPECTION PROCEDURE LARGE BA PUBLISHED

EIS-1195 F 8/25/1981 ULTRASONIC INSPECTION PROCESS FOR JET EN PUBLISHED

EIS-1197 F 1/5/1984 ULTRASONIC INSPECTION PROCEDURE TURBO-PR PUBLISHED

EIS-1198 H 10/20/1988 ULTRASONIC INSPECTION PROCEDURE TURBINE PUBLISHED

EIS-1199 B 5/23/1986 ULTRASONIC INSPECTION PROCEDURE BEARING PUBLISHED

EIS-1200 AE 12/17/2020 ACCEPTANCE CRITERIA FOR FUSION WELDS PUBLISHED

EIS-1201 M 4/27/2020 PROCESS CONTROL AND INSPECTION OF BRAZED PUBLISHED

EIS-1204 10/10/1991 ELECTROMECHANICAL POLARIZATION INSPECTIO PUBLISHED

EIS-1207 A 10/22/1969 INSPECTIONAL DEFINITION FOR EVALUATION O PUBLISHED

EIS-1208 11/13/1974 EVALUATION AND ACCEPTANCE CRITERIA PUBLISHED

EIS-1209 C 7/6/1993 EVALUATION & ACCEPTANCE CRITERIA-NICKEL PUBLISHED

EIS-1213 A 10/17/1997 INSPECTION REQUIREMENTS AND ACCEPTANCE S PUBLISHED

EIS-1216 6/24/2009INSTALLATION AND INSPECTION OF WIRE MESH SCREEN BRAZED TO

SUBSTRATE PUBLISHED

EIS-1217 C 2/28/1989 NEUTRON RADIOGRAPHIC INSPECTION FOR INVE PUBLISHED

EIS-1218 A 7/17/1992 INSPECTION PROCEDURE FOR SINGLE CRYSTAL VERIFICATION PUBLISHED

EIS-1221 B 7/17/2003 INSPECTION REQUIREMENTS AND ACCEPTANCE S PUBLISHED

EIS-1222 F 12/17/2020 ACCEPTANCE CRITERIA FOR FUSION WELDS (FO PUBLISHED

EIS-1223 10/15/2013 VISUAL STANDARDS FOR PAINT AND ORGANIC COATINGS PUBLISHED

EIS-1225 D 10/29/1998 ACCEPTABLE STANDARDS-ULTRASONIC INSP OF PUBLISHED

EIS-1227 1/15/1988 INSPECTION PROCEDURE, ULTRASONIC FOR CAS PUBLISHED

EIS-1230 12/14/1987 INSPECTION PROCEDURE, ULTRASONIC, FOR LAMILLOY PANES ASSEMBLIES PUBLISHED

58

Specification


EIS-1231 2/26/1993 INSPECTION PROCEDURE, ULTRASONIC, FOR LAMINATED PANEL ASSEMBLIES PUBLISHED

EIS-1232 11/21/1995 INSPECTION PROCEDURE, ULTRASONIC, FOR LAMATED PANEL ASSEMBLIES PUBLISHED

EIS-1237 10/18/1984ULTRASONIC INSPECTION OF AXIAL DUAL PROPERTY TURNINE ROTOR

BONDLINE PUBLISHED

EIS-1260 C 10/3/1957 INSPECTION OF AMS 3132 PERMANENT RESIN C PUBLISHED

EIS-1270 F 7/29/2011 ACCEPTABILITY LIMITS FOR OPEN-FACE HONEY PUBLISHED

EIS-1280 A 11/4/2015 VISUAL INSPECTION - COMPRESSOR BLADES PUBLISHED

EIS-12AB 9/27/1984 VISUAL INSPECTION STANDARD FOR CERAMIC C PUBLISHED

EIS-12AC 9/27/1984 FLUORESCENT PENETRANT INSPECTION STANDAR PUBLISHED

EIS-12AD 9/27/1984 RADIOGRAPHIC INSPECTION STANDARD FOR CER PUBLISHED

EIS-1300 A 8/31/1995 SILVER SOLDER EDGE REPAIR LIMITS NON-CURRENT

EIS-1301 D 3/7/2005 INSPECTION REQUIREMENTS AND ACCEPTANCE PUBLISHED

EIS-1305 4/17/1989 INSPECTION REQUIREMENTS AND ACCEPTANCE PUBLISHED

EIS-1309 E 10/24/2017 INSPECTION, VISUAL, OF FINISHED TURBINE PUBLISHED

EIS-1315 3/28/2009MICROSTRUCTURAL INSPECTION AND REQUIREMENTS FOR T56 SERIES III

AMS 5708 TURBINE PUBLISHED

EIS-1342 E 6/5/2008 QUALITY CONTROL EPOXY RESIN ABRADABLE SE PUBLISHED

EIS-1345 4/18/1967 PROCEDURE FOR INSPECTION OF RADIAL LIP T PUBLISHED

EIS-1346 11/19/2013Non-contact Surface Form and Finish Inspection Method for Cylindrical and

ConicaPUBLISHED

EIS-1350 5/17/1960 INSPECTION PROCEDURES FOR HIGH TEMP RESI PUBLISHED

EIS-1400 B 9/26/1951 INSPECTION PROCEDURES FOR AIRCRAFT ORGAN PUBLISHED

EIS-1401 B 3/18/2014 INSPECTION REQUIREMENTS AND ACCEPTANCE PUBLISHED

EIS-1403 A 12/29/1951 INSPECTION PROCEDURES FOR ORGANIC COATIN PUBLISHED

EIS-1404 B 12/7/2011 INSPECTION REQUIREMENTS AND ACCEPTANCE S PUBLISHED

EIS-1408 B 5/17/2007 INSPECTION REQUIREMENTS AND ACCEPTANCE PUBLISHED

EIS-1500 H 5/12/2014 ETCH INSPECTION DETECTION OF WHITE LAYER PUBLISHED

EIS-1508 4/17/1989 INSPECTION, ETCH METHOD, FOR GRINDING DA PUBLISHED

EIS-1510 T 1/6/2012 ETCH DETECTION FOR DETECTING GRINDING DE PUBLISHED

59

Specification


EIS-1512 A 9/23/2011INSPECTION, ETCH METHOD, FOR GRINDING DAMAGE ON PYROWEAR 675

(EMS 65008/AMS 5930PUBLISHED

EIS-1514 12/16/1969 ETCH INSPECTION FOR GRINDING DAMAGE ON M PUBLISHED

EIS-1515 H 3/19/1997 ETCH INSPECTION FOR DETECTING GRINDING D PUBLISHED

EIS-1516 A 8/31/1995 DETECTION OF GRINDING TEMPER HARDENED NON-CURRENT

EIS-1517 7/6/1966 GRINDING TEMPER DETECTION CASE-HARDENED PUBLISHED

EIS-1520 L 2/8/2016 NONDESTRUCTIVE TEST REQUIREMENTS FOR ROL PUBLISHED

EIS-1525 A 8/31/1995 MACRO-ETCH INSPECTION FOR SURFACE DEFECT NON-CURRENT

EIS-1526 6/3/1960 ETCH INSPECTION FOR DETECTING GRINDING PUBLISHED

EIS-1528 A 8/31/1995 VAPOR BLAST INSPECTION OF HARD METALLIC NON-CURRENT

EIS-1530 5/18/1961 DESTRUCTIVE MACRO-ETCH INSPECTION FOR PUBLISHED

EIS-1550 D 8/31/1972 INSPECTION OF GRAIN STRUCTURE INVESTMENT PUBLISHED

EIS-1551 B 10/15/2013 INSPECTION BY CLASSIFICATION OF GRAIN PUBLISHED

EIS-1552 B 7/27/1972 INSPECTION OF GRAIN STRUCTURE INVESTMENT PUBLISHED

EIS-1553 B 5/5/1982 INSPECTION BY CLASSIFICATION OF GRAIN ST PUBLISHED

EIS-1590 11/8/1973 SPOT CHECK FOR PHOSPHORUS-NICKEL AND-COB PUBLISHED

EIS-1601 4/23/1998 INSPECTION CRITERIA FOR COMPOSITE VANES PUBLISHED

EIS-1601-1 A 8/27/1998 INSPECTION CRITERIA FOR RESIN TRANSFER M PUBLISHED

EIS-1602 E 3/31/2020 INSPECTION AND REPAIR OF MANUFACTURING D PUBLISHED

EIS-1700 C 10/3/1960 PROCEDURE FOR & CALCULATION OF INSTRUMEN PUBLISHED

EIS-1710 8/22/1960 INSPECTION FOR DENSITY DETERMINATION PUBLISHED

EIS-1720 G 1/19/2007 FATIGUE TESTING COMPRESSOR WHEEL & BLADE PUBLISHED

EIS-1835 A 8/18/2010 ULTRASONIC INSP PROC FOR DIFF BOND PUBLISHED

EIS-1870 12/15/1955 PRESSURE TESTING-HYDRAULIC HOSE ASSEMBLI PUBLISHED

EIS-1872 7/22/1957 PRESSURE TESTING-HYDRAULIC FIREPROOF HOS PUBLISHED

EIS-1875 G 7/7/2012 PRESSURE TESTING - HYDRAULIC, CASTINGS PUBLISHED

EIS-1877 A 5/17/1982 TURBINE BLADE AND VANE - WATERFLOW INSPE PUBLISHED

EIS-1879 A 3/3/1997 INSPECTION PROCEDURE, FLOW TEST, FOR LAMILLOY PANEL ASSEMBLIES PUBLISHED

EIS-1880 F 7/24/2012 PRESSURE TESTING - AIR AS SPECIFIED PUBLISHED

EIS-1881 5/5/1992 INSPECTION PROCEDURE & ACCEPTANCE STANDA PUBLISHED

EIS-1882 10/14/1968 FLOW & PRESSURE TESTING T63 & 250 FRONT PUBLISHED

EIS-1883 11/20/2002 INSP. PROCEDURE, FLOW TEST FOR PROUS PAN PUBLISHED

60

Specification


EIS-1888 A 2/8/2008 LOW CYCLE FATIGUE (LCF) TEST PROCEDURE PUBLISHED

EIS-1889 6/20/2014PROCEDURE FOR DETERMINATION OF POISSION S RATION USING TENSION

TESTS PUBLISHED

EIS-1890 A 10/21/2003 AIRFLOW INSPECTION OF TURBINE BLADES AND PUBLISHED

EIS-1900 B 2/15/1966 STANDARD HARDNESS CONVERSION TABLES FOR PUBLISHED

EIS-502 W 7/17/2013 CONTROL AND TESTING OF FORGINGS BY SUPPL PUBLISHED

EIS-507 5/18/1977 TRACE ELEMENT CONTROL FOR NICKEL ALLOY PUBLISHED

EIS-644 C 3/18/2014 INSPECTION REQUIREMENTS FOR LARGE INTEGR PUBLISHED

EIS-645 L 11/30/1987 MATERIAL QUALIFICATION TURBOPROP TURBINE PUBLISHED

EIS-646 C 7/6/2011 MATERIAL QUALIFICATION INVESTMENT CAST T PUBLISHED

EIS-648 AB 3/18/2014 MATERIAL QUALIFICATION-CAST SINGLE CRYST PUBLISHED

EIS-649 M 5/20/2014 MATERIAL QUALIFICATION CAST SINGLE CRYST PUBLISHED

EIS-655 K 3/18/2014 MATERIAL INSPECTION INVESTMENT CAST TURB PUBLISHED

EIS-656 W 3/18/2014 MATERIAL QUALIFICATION INVESTMENT CAST T PUBLISHED

EIS-657 F 9/15/1985 MATERIAL INSPECTION OF PRECISION INVESTM NON-CURRENT

EIS-658 BA 3/18/2014 MATERIAL QUALIFICATION, SHROUDED CAST AN PUBLISHED

EIS-659 AB 4/10/2020 MATERIAL QUALIFICATION-INVESTMENT CAST N PUBLISHED

EIS-662 AB 10/15/2017 MATERIAL QUALIFICATION INTEGRAL TURBINE PUBLISHED

EIS-663 U 3/18/2014 MATERIAL QUALIFICATION-INTEGRAL COMPRESS PUBLISHED

EIS-664 P 3/18/2014 MATERIAL QUALIFICATION INTEGRAL TURBINE PUBLISHED

EIS-667 E 2/26/2019 MATERIAL QUALIFICATION-INVESTMENT CAST N PUBLISHED

EIS-668 6/15/1984 MATERIAL QUALIFICATION-ROTATING COMPONEN PUBLISHED

EIS-669 B 1/15/1989 MATERIAL QUALIFICATION INTEGRAL TURBINE PUBLISHED

EIS-671 B 1/30/1989 MATERIAL QUALIFICATION INTEGRAL TURBINE PUBLISHED

EIS-672 E 12/17/2020 MATERIAL QUALIFICATION INVESTMENT CAST T PUBLISHED

EIS-674 D 3/18/2014 MATERIAL QUALIFICATION CAST COMPRESS AIR PUBLISHED

EIS-675 L 3/18/2014 MATERIAL QUALIFICATION-GENERAL PROCEDURE PUBLISHED

EIS-675-1 F 2/24/1978 MATERIAL QUALIFICATION-GENERAL PROCEDURE PUBLISHED

EIS-675-10 E 8/31/1995 MATERIAL QUALIFICATION-GENERAL PROCEDURE NON-CURRENT

EIS-675-11 B 9/10/1984 MATERIAL QUALIFICATION-GENERAL PROCEDURE PUBLISHED

EIS-675-12 A 9/11/1978 MATERIAL QUALIFICATION-GENERAL PROCEDURE PUBLISHED


61

Specification



EIS-675-15 7/1/1979 MATERIAL QUALIFICATION-GENERAL PROCEDURE PUBLISHED

EIS-675-16 6/27/1990 MATERIAL QUALIFICATION GENERAL PROCEDURE PUBLISHED


EIS-675-18 7/21/1999 MATERIAL QUAL.-GENERAL PROCEDURE IRON, N PUBLISHED

EIS-675-2 E 7/21/1978 MATERIAL QUALIFICATION-GENERAL PROCEDURE PUBLISHED





EIS-675-7 F 1/31/1991 MATERIAL QUALIFICATION-GENERAL PROCEDURE PUBLISHED



EIS-680 L 12/20/1988 MATERIAL INSPECTION FORGED AIRFOIL SECTI PUBLISHED

EIS-681 B 6/15/1988 QUALITY CONTROL ALUMINUM COMPRESSOR VANE PUBLISHED

EIS-682 A 6/16/1988 QUALITY CONTROL-ALUMINUM COMPRESSOR VANE PUBLISHED

EIS-685 A 8/31/1995 FLUORESCENT PENETRANT INSPECTION TF41 NON-CURRENT

EIS-690 10/11/1956 MATERIAL INSPECTION COMPRESSOR BLADES AN PUBLISHED

EIS-692 4/28/1978 VISUAL INSPECTION-MODEL 912 HP COMPRESSO PUBLISHED

EIS-693 10/5/2006 VISUAL INSPECTION-COMPRESSOR VANES PUBLISHED

EIS-695 A 4/9/1969 VISUAL INSPECTION OF COMPRESSOR VANE ASS PUBLISHED

EIS-696 8/8/1973 VISUAL INSPECTION OF COMPRESSOR VANE STO PUBLISHED

EIS-697 D 4/8/1969 VISUAL INSPECTION OF SEALING RINGS & PAC PUBLISHED

EIS-703 A 4/8/1969 VISUAL INSPECTION OF STANDARD SEALING RI PUBLISHED

EIS-790 N 3/18/2014 MATERIAL QUALIFICATION-GENERAL PROCEDURE PUBLISHED

EIS-790-1 D 8/18/1971 MATERIAL QUALIFICATION-GENERAL PROCEDURE PUBLISHED

EIS-790-10 G 1/31/1991 MATERIAL QUALIFICATION-GENERAL PROCEDURE PUBLISHED

EIS-790-11 C 12/21/1987 MATERIAL QUALIFICATION-GENERAL PROCEDURE PUBLISHED

EIS-790-12 E 2/27/2012 REDUCTION GEAR CASE - REAR MODEL 501 PUBLISHED



EIS-790-15 A 1/11/1974 REDUCTION GEAR MAIN DIAPHRAGM ASSEMBLY - PUBLISHED

62

Specification


EIS-790-16 A 9/23/2015 REDUCTION GEAR CASE-REAR MODEL 501 PUBLISHED

EIS-790-2 D 3/4/1971 MATERIAL QUALIFICATION-GENERAL PROCEDURE PUBLISHED

EIS-790-20 B 8/31/1995 MATERIAL QUALIFICATION-GENERAL PROCEDURE NON-CURRENT


EIS-790-22 C 8/31/1995 HIGH SPEED ACCESSORY GEAR BOX COVER TF41 NON-CURRENT

EIS-790-23 B 1/11/1974 HIGH SPEED ACCESSORY GEARBOX HOUSING ASS NON-CURRENT






EIS-790-30 9/15/1987 MATERIAL QUALIFICATION MAGNESIUM ALLOY A PUBLISHED




EIS-810 E 7/22/2011 BLUE ANODIZE AND ACID IMMERSION ETCH INS PUBLISHED

EIS-820 A 1/30/1998 CHEMICAL INSPECTION FOR METALLIC CONTAMI PUBLISHED

EIS-830 C 3/6/1989 CORROSION TESTING AND INSPECTION PROCEDU PUBLISHED

EIS-831 2/8/1988 ACCEPTANCE STANDARDS SALT SPRAY CORROSIO PUBLISHED

EIS-900 C 1/24/2008CANCELLED - REPLACED BY EIS-901 MAGNETIC PARTICLE INSPECTION

GENERAL PRO PUBLISHED

EIS-901 B 5/10/2012 MAGNETIC PARTICLE INSPECTION GENERAL PROCEDURE PUBLISHED

EIS-940 K 12/3/2008 FLOURESCENT MAGNETIC PARTICLE INSPECTION PUBLISHED

EIS-951 K 12/4/2008 MAGNETIC PARTICLE INSPECTION - PROPELLER PUBLISHED

EIS-952 J 12/8/2008 MAGNETIC PARTICLE INSPECTION SHAFTS - EX PUBLISHED

EIS-953 G 12/4/2008 MAGNETIC PARTICLE INSPECTION - COMPRESSO PUBLISHED

EIS-955 H 12/4/2008 MAGNETIC PARTICLE INSPECTION - SMALL SHA PUBLISHED

EIS-957 A 12/4/2008 MAGNETIC PARTICLE INSPECTION-HIGHLY PUBLISHED

EIS-975 H 12/4/2008 MAGNETIC PARTICLE INSPECTION - LARGE GEA PUBLISHED

EIS-976 J 12/4/2008 MAGNETIC PARTICLE INSPECTION-SPUR & PINI PUBLISHED

EIS-977 K 12/4/2008 MAGNETIC PARTICLE INSPECTION-REDUCTION PUBLISHED

EIS-980 G 12/4/2008 MAGNETIC PARTICLE INSPECTION-SPUR & BEVE PUBLISHED

63

Specification


EIS-981 H 12/3/2008 MAGNETIC PARTICLE INSPECTION - SMALL SPU PUBLISHED

EIS-982 G 12/3/2008 MAGNETIC PARTICLE INSPECTION - BEVEL GEA PUBLISHED

EIS-985 H 12/1/2008 MAGNETIC PARTICLE INSPECTION-PLANET GEAR PUBLISHED

EMS-10 E 3/5/1991 QUENCHING OIL, REFINED PETROLEUM BASE PUBLISHED

EMS-100 E 1/5/1989 SOLVENT, VAPOR DEGREASER /TRICHLORETHYLE PUBLISHED

EMS-102 A 7/15/1992 CLEANING COMPOUND FOR CARBON REMOVAL, OR NON-CURRENT

EMS-104 G 4/18/1991 CLEANING COMPOUND, ALKALINE, ELECTROLYTI PUBLISHED

EMS-105 J 2/20/2014 CLEANER, ALUMINUM AND MAGNESIUM PUBLISHED

EMS-107 C 11/9/1955 FLOOR CLEANER, OIL ABSORBENT TYPE PUBLISHED

EMS-109 3/20/1991 ALUMINUM OXIDE, 90 GRIT PUBLISHED

EMS-111 A 3/30/1971 SILICON DIOXIDE FILLER PUBLISHED

EMS-112 5/20/1969 FILLER, ALUMINA PUBLISHED

EMS-1120 12/20/2002 INSPECTION PROCEDURE, EDDY CURRENT - FOR PUBLISHED

EMS-115 C 3/12/1981 ALUMINUM POWDER PUBLISHED

EMS-116 C 5/9/1979 ALUMINUM OXIDE PUBLISHED

EMS-117 C 11/9/1955 POTASSIUM CYANIDE PUBLISHED

EMS-119 B 3/23/1970 AMMONIUM CHLORIDE (WHITE, TECHNICAL GRAD PUBLISHED

EMS-120 E 3/30/1993 PURIFIED WATER PUBLISHED

EMS-124 B 3/3/1997 PURIFIED WATER FOR INDUSTRIAL GAS TURBIN PUBLISHED

EMS-126 A 6/23/1983 ALUMINUM OXIDE (RECONDITIONED) PUBLISHED

EMS-129 A 1/14/2004 METHYL ETHYL KETONE PUBLISHED

EMS-133 8/13/2003 ORGANIC SOLVANTS AND PROPRIETARY CHEMICA PUBLISHED

EMS-138 B 10/22/2012 FLUID FILM PRESERVATIVE PUBLISHED

EMS-145 F 8/22/2005 NICKEL ANODES PUBLISHED

EMS-148 B 1/16/1956 COPPER ANODES, OXYGEN FREE PUBLISHED

EMS-152 B 3/28/1963 SILVER ANODES PUBLISHED

EMS-17 R 10/19/2011 COMPOUND, FINGERPRINT CORROSION INHIBITI PUBLISHED

EMS-19 10/27/1955 OIL, PENETRATING PUBLISHED

EMS-190 C 3/16/1985 OINTMENT, HAND, ANTI-PERSPIRATION PUBLISHED

EMS-197 B 9/15/2005 EXOTHERMIC MATERIAL PUBLISHED

EMS-198-1 A 9/15/2005 FUSED SILICA REFRACTORY GRAIN, 40 MESH PUBLISHED

EMS-198-2 A 9/15/2005 FUSED SILICA, REFRACTORY GRAIN, 80 MESH PUBLISHED

64

Specification


EMS-198-3 A 9/15/2005 FUSED SILICA REFRACTORY GRAIN, 325 MESH PUBLISHED

EMS-199 A 9/15/2005 COLLODIAL SILICA SOL. PUBLISHED

EMS-2173 4/23/2003 EPOXY, LIQUID RESIN FORMULATION (300 DEG PUBLISHED

EMS-22620 F 11/2/2006 SYNTHETIC RUBBER - SYNTHETIC OIL RESISTA PUBLISHED

EMS-22627 12/3/1974 SYNTHETIC RUBBER, NITRILE (BUNA-N) TYPE PUBLISHED

EMS-22633 B 7/21/1976 RINGS, SEALING, SYNTHETIC RUBBER MOLYBDE PUBLISHED

EMS-22638 B 7/15/1992 RINGS, SEALING, SYNTHETIC RUBBER PETROLE NON-CURRENT

EMS-22655 B 7/20/1993 RUBBER, SYNTHETIC OIL RESISTANT (75-85) PUBLISHED

EMS-22660 A 4/8/1983 SYNTHETIC RUBBER - SYNTHETIC OIL RESISTA PUBLISHED

EMS-22665 2/17/1960 SYNTHETIC RUBBER - SYNTHETIC OIL RESISTA PUBLISHED

EMS-22668 A 7/17/1995 RUBBER, SYNTHETIC - HIGH TEMPERATURE FLU NON-CURRENT

EMS-22670 F 10/23/1972 RINGS, SEALING, SYNTHETIC RUBBER HIGH TE PUBLISHED

EMS-22672 A 7/17/1995 RINGS, SEALING, SYNTHETIC RUBBER, HIGH T NON-CURRENT

EMS-22675 B 7/17/1995 RINGS, SEALING, SYNTHETIC RUBBER HIGH NON-CURRENT

EMS-22676 A 7/17/1995 RINGS, SEALING, SYNTHETIC RUBBER HIGH TE NON-CURRENT

EMS-22705 A 10/21/1971 SILICONE RUBBER FOAM - TWO COMPONENT PUBLISHED

EMS-22710 3/21/1957 PLIABLE SILICONE RUBBER COMPOUND PUBLISHED

EMS-22712 A 7/17/1995 SILICONE RUBBER COMPOUND ROOM TEMPERATUR NON-CURRENT

EMS-22713 6/4/1969 SILICONE RUBBER COMPOUND ROOM TEMPERATUR PUBLISHED

EMS-22714 C 9/9/1976 SILICONE RUBBER COMPOUND ROOM TEMPERATUR PUBLISHED

EMS-22715 E 6/17/1970 SILICONE RUBBER COMPOUND ROOM TEMPERATUR PUBLISHED

EMS-22716 A 6/15/1979 SILICONE RUBBER COMPOUND ROOM TEMPERATUR PUBLISHED

EMS-22717 3/6/1995 ADHESIVE/SEALANT,SILICONE RUBBER COMPOUN PUBLISHED

EMS-22718 6/4/1998 SEALANT, FLUOROSILICONE, ROOM TEMPERATUR PUBLISHED

EMS-22720 7/21/1969 FLUOROSILICONE RUBBER COMPOUND ROOM TEMP PUBLISHED

EMS-22725 B 7/20/1993 RUBBER, POLYSULFIED COMPOUND ROOM TEMPER PUBLISHED

EMS-22786 C 3/24/2021 RUBBER, SILICONE, UNSUPPORTED, GENERAL P PUBLISHED

EMS-22787 A 3/24/2021 SILICONE RUBBER FIBERGLASS FABRIC REINFO PUBLISHED

EMS-24210 E 11/18/1981 GASKETS - HEAT RESISTING PUBLISHED

EMS-24215 B 12/17/2009 CUSHION, PTFE IMPREGNATED PBI POLYAMIDE PUBLISHED

EMS-24216 E 1/22/2008 GASKETS, HEAT RESISTING, FLEXIBLE, GRAPH PUBLISHED

EMS-24220 B 7/17/1995 GASKETS, HEAT RESISTING CERAMIC FIBER NON-CURRENT

65

Specification


EMS-24230 6/21/1989 GASKET - HOT OIL RESISTING PUBLISHED

EMS-25105 4/7/1958 LOW WEIGHT FOAM EPOXY CASTING RESIN PUBLISHED

EMS-25120 G 8/30/1991 THIN WALL TUBING POLYTETRAFLUOROETHYLENE PUBLISHED

EMS-25122 B 7/17/1995 THERMO-SETTING MOLDING MATERIAL GLASS FI NON-CURRENT

EMS-25123 B 7/17/1995 MOLDED PHENOLIC RESIN NON-CURRENT

EMS-25124 2/6/1970 REINFORCED PLASTIC LAMINATED COTTON FABR PUBLISHED

EMS-25126 3/31/1971 DIALLYL PHTHALATE RESIN MOLDINGS, GLASS PUBLISHED

EMS-25130 A 11/28/1962 REINFORCED TEFLON COMPOUND - FIBERGLASS PUBLISHED

EMS-25135 4/15/1968 MOLDED SHAPES POLYTETRAFLUOROETHYLENE SI PUBLISHED

EMS-25137 8/12/1981 POLYTETRAFLUOROETHYLENE-25 PERCENT PUBLISHED

EMS-25140 A 7/17/1995 PLASTIC MOLDINGS, POLYAMIDE (NYLON) GLAS NON-CURRENT

EMS-25150 C 3/15/1982 MOLDED SHAPES, BRONZE FILLED POLYTETRAFL PUBLISHED

EMS-25152 B 7/17/1995 MOLDED SHAPES, BRONZE-MOLYBDENUM DISULFI NON-CURRENT

EMS-25155 12/8/1969 MOLD RELEASE COMPOUND PUBLISHED

EMS-25156 4/1/1971 MOLD RELEASE AGENT, POLYVINYL ALCOHOL PUBLISHED

EMS-25157 4/13/1971 MOLD RELEASE AGENT PUBLISHED

EMS-25200 A 7/17/1995 SHEET AND TUBING - THERMOSETTING RESIN NON-CURRENT

EMS-25250 B 7/17/1995 URETHANE FOAM SYSTEM NON-CURRENT

EMS-25500 3/9/1953 MOLDED FIBER ROD PUBLISHED

EMS-25505 B 7/17/1995 PLASTIC MOLDINGS & EXTRUSIONS, POLYAMIDE NON-CURRENT

EMS-25510 A 7/17/1995 LAMINATED GLASS FABRIC THERMOSETTING MEL NON-CURRENT

EMS-25630 A 7/17/1995 PHENOLIC PLASTIC, MINERAL FILLED MOLDED NON-CURRENT

EMS-26120 8/4/1965 GLASS YARN, POLYTETRAFLUOROETHYLENE COAT PUBLISHED

EMS-26121 8/4/1965 GLASS YARN, ELECTRICAL GRADE, CONTINUOUS PUBLISHED

EMS-26145 8/5/1958 SILK LACING CORD - BLACK (ELECTRICAL) PUBLISHED

EMS-26155 10/5/1961 TWISTLESS UNBLEACHED COTTON TAPE PUBLISHED

EMS-26160 8/4/1965 GLASS TAPE, POLYTETRAFLUOROETHYLENE COAT PUBLISHED

EMS-26165 8/4/1965 SKIVED POLYTETRAFLUOROETHYLENE TAPE PUBLISHED

EMS-26167 11/5/1970 POLYTETRAFLUOROETHYLENE TAPE PUBLISHED

EMS-26186 A 7/17/1995 FIBERGLASS CLOTH (128 VOLAN A) NON-CURRENT

EMS-26200 G 7/17/1995 EPOXY RESIN PREIMPREGNATED GLASS CLOTH NON-CURRENT

EMS-26201 D 9/23/2011 CARBON FIBER FABRIC BISMAILEIMIDE (MDI) PUBLISHED

66

Specification


EMS-26202 F 3/30/2010 GLASS FIBER FABRIC BMI RESIN INPREGNATED PUBLISHED

EMS-26203 B 1/10/2008 UNDIRECTIONAL CARBON FIBER BISMALEIMIDE PUBLISHED

EMS-26212 B 7/20/1993 CLOTH, TYPE E GLASS, STYLE 1583/150-2/2 PUBLISHED

EMS-26600 C 2/4/1959 PRIMER, SYNTHETIC, LACQUER RESISTING PUBLISHED

EMS-26602 B 9/26/1973 PRIMER, RUST INHIBITING PUBLISHED

EMS-26606 A 7/17/1995 PRIMER, VINYL WASH NON-CURRENT

EMS-26690 B 5/15/2019 ALUMINUM COATING-HEAT & CORROSION RESIST PUBLISHED

EMS-26710 K 3/19/1997 ALUMINUM PAINT, LEAD FREE, HEAT & CORROS PUBLISHED

EMS-26712 E 7/17/1995 ALUMINUM PAINT, CORROSION AND HEAT RESIS NON-CURRENT

EMS-26721 D 5/27/2014 CORROSION RESISTANT LOW VOC TWO COMPONEN PUBLISHED

EMS-26725 E 9/23/2011 CORROSION RESISTANT PAINT (TWO COMPONENT PUBLISHED

EMS-26746 B 7/17/1995 COATING POLYURETHANE, SPRAY TYPE, GLOSS NON-CURRENT

EMS-26747 A 9/1/2004 COATING, SAND AND RAIN EROSION PROTECTIO PUBLISHED

EMS-27057 A 1/12/1966 POLYTETRAFLUOROETHYLENE FILM - UNFUSED, PUBLISHED

EMS-27058 8/6/1965 POLYTETRAFLUOROETHYLENE FILM, NON-FILLED PUBLISHED

EMS-27060 8/6/1965 POLYTETRAFLUOROETHYLENE FILM, .001 INCH PUBLISHED

EMS-27110 B 7/17/1995 PERMANENT RESIN COATING (CLEAR) NON-CURRENT

EMS-27115 6/16/1966 BORON FILAMENT - EPOXY RESIN TAPE SYSTEM PUBLISHED

EMS-27120 A 8/27/1954 PERMANENT RESIN COATING (FOR INTERNAL EN PUBLISHED

EMS-27121 3/22/1971 ADHESIVE, SINGLE COMPONENT EPOXY PASTE PUBLISHED

EMS-27122 8/27/1970 ADHESIVE, MODIFIED EPOXY RESIN HIGH PUBLISHED

EMS-27123 4/24/2003 EPOXY, LIQUID RESIN FORMULATION (300 DEG PUBLISHED

EMS-27124 B 7/30/2009 ADHESIVE, EPOXY PASTE, FOR BONDING OF NUTPLATES (300* F/150*C MAX) PUBLISHED

EMS-27128 A 10/6/1969 EPOXY RESIN COMPOUND ADHESIVE (THERMOSET PUBLISHED

EMS-27129 C 3/3/1997 EPOXY RESIN, SEMI-SOLID PUBLISHED

EMS-27132 E 6/22/1972 EPOXY RESIN, MEDIUM VISCOSITY LIQUID PUBLISHED

EMS-27133 B 6/17/1964 POLYAMIDE CURING AGENT PUBLISHED

EMS-27134 A 5/5/1970 EPOXY RESIN CURING AGENT PUBLISHED

EMS-27135 A 7/17/1995 STUD SETTING COMPOUND,R-63 SILICONE NON-CURRENT

EMS-27136 A 7/17/1995 PRIMER, EPOXY, /TWO COMPONENTS/ NON-CURRENT

EMS-27137 11/20/1968 POLYURETHANE RESIN PAINT PUBLISHED

67

Specification


EMS-27138 B 7/17/1995 POLYURETHANE THINNER NON-CURRENT

EMS-27139 E 2/4/1970 EPOXY RESIN CURING AGENT PUBLISHED

EMS-27140 A 7/17/1995 DIETHYLAMINOPROPYLAMINE NON-CURRENT

EMS-27141 12/30/1969 DIETHYLAMINOPROPYLAMINE (DTA) PUBLISHED

EMS-27146 5/29/2002 RESIN,URETHANE OLIGOMER/ (METH)ACTYLATE PUBLISHED

EMS-27147 12/2/2002 CEMENT, PLASTIC, POLYSTYRENE/TOLUENE/ALL PUBLISHED

EMS-27155 A 7/17/1995 ABRADABLE EPOXY BASED RESIN SEAL MATERIA NON-CURRENT

EMS-27156 11/21/1961 ABRADABLE EPOXY BASED RESIN SEAL MATERIA PUBLISHED

EMS-27159 5/31/1990 SEAL MATERIAL, ABADABLE, SILICONE RUBBER PUBLISHED

EMS-27160 8/6/1965 POLYTETRAFLUOROETHYLENE RESIN DISPERSION PUBLISHED

EMS-27300 A 4/17/1951 BLUE LAYOUT COMPOUND (ALUMINUM AND MAGNE PUBLISHED

EMS-27310 A 4/17/1951 WATER SOLUBLE LAYOUT PAINT PUBLISHED

EMS-27400 A 11/15/1951 CLEAR LACQUER (GLYPTAL) PUBLISHED

EMS-27405 1/25/1961 PROTECTIVE COATING, STRIPPABLE PUBLISHED

EMS-27420 C 1/28/1959 ABRASIVE COATING PUBLISHED

EMS-27500 2/3/1956 BLASTING GRIT - SOFT (BLACK WALNUT SHELL PUBLISHED

EMS-27605 B 10/29/1991 DRY LUBRICANT PUBLISHED

EMS-27608 A 2/27/1970 MOLYKOTE, M-88 LUBRICANT PUBLISHED

EMS-27609 B 5/30/2008 LUBRICANT, DRY FILM, MOLYBDENUM DISULFID PUBLISHED

EMS-27610 H 12/18/1992 HIGH TEMPERATURE LUBRICANT & ANTI-SIEZE PUBLISHED

EMS-27611 A 9/3/2003 HIGH TEMPERATURE LUBRICANT AND ANTI-SEIZ PUBLISHED

EMS-27613 A 7/15/1992 HIGH TEMPERATURE LUBRICANT AND ANTI-SIEZ NON-CURRENT

EMS-27615 C 6/6/2005 HIGH TEMPERATURE LUBRICANT & ANTI-SEIZE PUBLISHED

EMS-27619 A 2/26/2002 COMPOUND,DRY FILM LUBRICANT, AMFSN PUBLISHED

EMS-27620 A 7/15/1992 HIGH TEMPERATURE ANTI-SIEZE COMPOUND NON-CURRENT

EMS-27621 1 7/9/1998 COMPOUND, DRY FILM LUBRICANT, SILOXSEAL PUBLISHED

EMS-27623 1 7/9/1998 COMPOUND, DRY FILM LUBRICANT, SILOXSEAL PUBLISHED

EMS-27625 B 12/5/1960 HIGH TEMPERATURE ANTI-FRETTING COMPOUND PUBLISHED

EMS-27627 C 2/17/2015 ANTI-SEIZE COMPOUND HIGH TEMPERATURE, HI PUBLISHED

EMS-27628 B 1/15/2008 INORGANIC ANTI-FRET COATING MAT 950 DEG PUBLISHED

EMS-27630 B 7/20/1993 COMPOUND, ANTI-FRETTING HIGH TEMPERATURE PUBLISHED

EMS-27637 11/4/2004 ANTI-SEIZE, HIGH-TEMPERATURE, HIGH-LOAD- PUBLISHED

68

Specification


EMS-27700 A 7/20/1993 EXPANDING JOINT COMPOUND, HIGH TEMPEMPER PUBLISHED

EMS-27710 B 3/7/2002 SEALING COMPOUND SYNTHETIC OIL RESISTANT PUBLISHED

EMS-27711 A 7/20/1993 SEALING MATERIAL SYNTHETIC OIL RESISTANT PUBLISHED

EMS-27720 B 12/16/1999 ADHESIVE SEALING COMPOUND FUEL & SYNTHET PUBLISHED

EMS-28825 B 7/17/1995 FLUX, BRAZING HIGH TEMPERATURE NON-CURRENT

EMS-28840 2/20/1958 FLUX, LIQUID RESIN PUBLISHED

EMS-28850 B 7/17/1995 FLUX,- SUBMERGED MELT ARC WELDING NON-CURRENT

EMS-29000 4/22/1964 ABRASIVE, GLASS BEADS PUBLISHED

EMS-29005 C 10/16/1995 GRIT, ALUMINUM OXIDE PUBLISHED

EMS-29510 D 7/17/1995 CERAMIC PAINT HEAT AND CORROSION RESISTA NON-CURRENT

EMS-29513 A 8/19/2014CHROMER-FREE ALUMINUM COATING, HEAT-AND CORROSION-RESISTANT

(ALSEAL 5000) PUBLISHED

EMS-29515 C 5/15/2019 ALUMINUM COATING - HEAT & CORROSION RESI PUBLISHED

EMS-29516 D 5/15/2019 ALUMINUM COATING - HEAT & CORROSION RESI PUBLISHED

EMS-29518 C 5/15/2019 ALUMINUM COATING-HEAT & CORROSION RESIST PUBLISHED

EMS-29520 D 5/15/2019 ALUMINUM COATING, CORROSION & HEAT RESIS PUBLISHED

EMS-29525 D 7/22/1997 INORGANIC CERAMIC BINDER, ALUMINUM PIGME PUBLISHED

EMS-29526 B 7/22/1997 CERAMIC BINDER, ALUMINUM FILLED PUBLISHED

EMS-29530 B 3/12/1999 SOLUTION FOR CONVERSION COATING OF ALUMI PUBLISHED

EMS-29540 A 1/28/1999 SOLUTION FOR SEALER COATING OF ALUMINUM PUBLISHED

EMS-29990 6/22/1966 CERAMIC INSULATORS - CRUSHABLE PUBLISHED

EMS-29995 A 7/17/1995 PRECISION CERAMIC CORES 2CAO AL203.SI02 NON-CURRENT

EMS-29996 B 4/26/1973 PRECISION CERAMIC CORES Si02 - ZrSiO4 PUBLISHED

EMS-31 B 7/25/1969 OIL, FLUORESCENT PENETRANT HIGH FLUORESC PUBLISHED

EMS-31705 B 10/16/2012 ALUMINUM ALLOY, PLATE PUBLISHED

EMS-31706 A 4/25/2008ALUMINUM ALLOY FORGINGS-7.7Zn-2.5Mg-1.5CU-0.16Cr (7049-T73),

SOLUTION AND PRECIPPUBLISHED

EMS-35 J 7/14/1965 OIL, SYNTHETIC LUBRICATING-PROP JET PUBLISHED

EMS-38 8/9/1966 MINERAL OIL, SPECIFICATION FOR INDUSTRIA PUBLISHED

EMS-38900 B 11/19/2013 ALUMINUM-POLYESTER POWDER PUBLISHED

EMS-39660 C 11/19/2013 POWDER, TUNGSTEN CARBIDE-17% COBALT FOR PUBLISHED

EMS-39661 B 3/19/1997 POWDER, NICKEL ALUMINUM ALLOY FOR HYPERV PUBLISHED

69

Specification


EMS-39662 B 12/15/2015 POWDER, CHROMIUM CARBIDE/NICKEL CHROMIUM PUBLISHED

EMS-39663 A 3/19/1997 POWDER, C55NI-20CR-20FE ALLOY (718), FOR PUBLISHED

EMS-39664 B 6/21/2016 POWDER,CONICRALY FOR PLASMA AND HIGH VEL PUBLISHED

EMS-4 C 11/3/1955 LUBRICATING OIL - VISCOSITY 75-80 S.U.S. PUBLISHED

EMS-44101 9/1/1960 MAGNESIUM ALLOY WELDING ROD AND WIRE (AZ PUBLISHED

EMS-44300 D 10/14/1955 MAGNESIUM ALLOY CASTINGS, SAND 3.5 RARE PUBLISHED

EMS-44504 A 11/18/2011 MAGNESIUM ALLOY CASTINGS (SAND) 9A1-2ZN PUBLISHED

EMS-44506 6/16/2005 MAGNESIUM ALLOY, SAND CASTINGS PUBLISHED

EMS-45 A 2/15/1989 LUBRICATING OIL, INDUSTRIAL GAS TURBINE PUBLISHED

EMS-50290 A 9/26/1990 ALUMINUM BRONZE WIRE 89Cu-9.5Al-1.0Fe PUBLISHED

EMS-53 A 10/23/1995 HIGH TEMPERATURE LUBRICATION OIL SYNTHETIC PROP-JET(OBSELETE) PUBLISHED

EMS-54700 C 2/22/1973 SILVER, COMMERCIALLY PURE PUBLISHED

EMS-5601 5/30/1990 ABRASIVE, ALUMINUM ORIDE, 220-240 GRIT PUBLISHED

EMS-56200 2/14/1958 SOLDER 95.5Sn - 3.5 Ag - 1.0Cd PUBLISHED

EMS-56510 C 2/4/1959 BRAZING ALLOY, SILVER 72 SILVER - 28 CO PUBLISHED

EMS-56511 C 8/13/2020 COPPER PASTE BRAZING FILLER METAL PUBLISHED

EMS-56515 10/3/1955 SILVER BRAZING ALLOY COMPOUND 40Ag-30Cu PUBLISHED

EMS-56516 3/20/1991Metal Matrix Aluminum Oxide Abrasive for Application to EMS 73755 (CMSX-

3) SinglPUBLISHED

EMS-56517 B 3/3/1997 CONSOLIDATED METAL MATRIX ALUM. OXIDE FO PUBLISHED

EMS-56520 G 10/26/1984 METAL, POWDER BRAZING FILLER, 63 AG, 28. PUBLISHED

EMS-56620 12/26/1956 BRAZING ALLOY, NICKEL BASE 35.5Fe-7.0Co- PUBLISHED

EMS-56623 3/24/1971 BRAZING FILLER METAL, HIGH TEMPERATURE N PUBLISHED

EMS-56625 B 3/19/1997 FILLER METAL, BRAZING, ROD, WIRE, SHEET PUBLISHED

EMS-56628 B 7/15/2014 BRAZING FILLER METAL, WIRE GAP NICKEL BA PUBLISHED

EMS-56635 A 7/17/1995 BRAZING ALLOY NICKEL BASE 19.0 CR-10.0 S NON-CURRENT

EMS-56650 6/5/1969 BRAZING ALLOY COBALT BASE 19.0Cr-16.5Ni- PUBLISHED

EMS-56700 11/22/1955 ALLOY WIRE, HARD FACING, COBALT BASE, 28 PUBLISHED

EMS-56701 A 7/19/1995 CAST WELD ROD-COATING ALLOY-CORROSION & NON-CURRENT

EMS-56705 C 11/19/2013 POWDER, MOLYBDENUM PUBLISHED

EMS-56712 C 4/19/2016 POWDER COBALT MOLYBDENUM CHROMIUM SILICO PUBLISHED

EMS-56713 B 7/19/2016 POWDER, COBALT-MOLYBDENUM-CHROMIUM-SILIC PUBLISHED

70

Specification


EMS-56714 A 5/18/2010 POWDER,ZEIN, AEP PUBLISHED

EMS-56716 A 11/6/2002 POWDER,PLATINUM-SILICON ALLOY, AEP PUBLISHED

EMS-56717 A 5/31/2006 POWDER,ALUMINUM-CHROMIUM ALLOY,AEP PUBLISHED

EMS-56718 5/29/2002 POWDER,ALUMINUM,AEP PUBLISHED

EMS-56719 A 11/4/1993 POWDER, NICKEL,CHROMIUM,ALUMINUM,YTTRIUM PUBLISHED

EMS-56721 A 8/7/1995 POWDER, YTTRIA STABILIZED ZIRCONIA PUBLISHED

EMS-56722 B 12/15/2015 POWDER, SPHERICAL, YTTRIA STABILITZED ZI PUBLISHED

EMS-56723 B 11/19/2013 POWDER, ALUMINUM-SILICON-BORON NITRIDE X PUBLISHED

EMS-56724 A 5/31/2006 POWDER,ALUMINUM-CHROMIUM-MANGANESE PUBLISHED

EMS-56725 A 12/2/2003 POWDER, ALUMINUM-CHROM ALLOY, AEP 246 PUBLISHED

EMS-56726 1/12/2007 POWDER, SPHERICAL,ZIRCONIA, STABILIZED W PUBLISHED

EMS-56728 D 9/20/2016 Powder, Aluminum-Chromium Alloy, AEP PUBLISHED

EMS-56729 C 7/19/2016 Powder, Aluminum-Chromium-Manganese Allo PUBLISHED

EMS-56730 D 8/19/2010 POWDER, NICKEL - CHROMIUM-BORON NITRIDE PUBLISHED

EMS-56731 8/9/2005 POWDER, ALUMINUM-SILICON-POLYESTER BLEND PUBLISHED

EMS-56732 8/9/2005 POWDER,ALUMINUM-SILICON-POLYESTER BLEND PUBLISHED

EMS-56751 A 9/20/2016 LABEL,SELF-ADHESIVE FOR PART MARKING (31 PUBLISHED

EMS-56752 E 12/2/2016 LOW CHLORIDE INKS & PAINTS-MAT'L MARKING PUBLISHED

EMS-56753 A 1/25/1996 POWDER, ALUMINUM BRONZE PUBLISHED

EMS-56754 D 5/15/1992 POWDER, 75/25 NICKEL COATED GRAPHITE PUBLISHED

EMS-56755 E 1/13/1992 POWDER, 85/15 NICKEL COATED GRAPHITE PUBLISHED

EMS-56756 A 7/16/1991 TUNGSTEN CARBIDE - 12% COBALT POWDER PLA PUBLISHED

EMS-56757 G 11/19/2013 POWDER, NICKEL-ALUMINUM COMPOSITE PUBLISHED

EMS-56758 C 6/21/2016 POWDER, ALUMINUM OXIDE PUBLISHED

EMS-56759 2/6/1991 SILICON - ALUMINUM WIRE 5.25% SILICON PUBLISHED

EMS-56760 C 5/15/1992 NICKEL-CHROMIUM ALLOY POWDER PUBLISHED

EMS-56762 B 4/19/2016 NICKEL-CHROMIUM-ALUMINUM-IRON-MOLYBDENUM PUBLISHED

EMS-56763 6/12/1992 POWDER NICKEL-ALUMINUM, PREALLOYED PUBLISHED

EMS-56764 D 6/19/1992 POWDER, ALUMINUM ALLOY - GRAPHITE COMPOS PUBLISHED

EMS-56765 B 3/1/1995 ALUMINUM GRAPHITE COMPOSITE POWDER PUBLISHED

EMS-56766 A 6/19/1992 POWDER, ALUMINUM ALLOY, 12% SILICON PUBLISHED

EMS-56767 A 3/3/1997 POWDR ALUMINUM-POLYIMIDE COMPOSITE FOR P PUBLISHED

71

Specification


EMS-56768 A 3/10/2000 POWDER, CONICRAIY-BORON NITRIDE/POLYESTE PUBLISHED

EMS-56769 A 4/19/2016 POWDER, CONICRAIY ALLOY PUBLISHED

EMS-56771 A 12/15/2015 POWDER, NICRAL BENTONITE COMPOSITE PUBLISHED

EMS-56772 A 9/29/1993 POWDER, NICKEL-CHROMIUM COMPOSITE PUBLISHED

EMS-56773 A 2/18/2002 POWDER, ALUMINUM OXIDE FOR HIGH-VELOCITY PUBLISHED

EMS-56774 A 7/19/2016 POWDER, WCCoCr FOR HVOF APPLICATION PUBLISHED

EMS-56775 9/23/2003 POWDER, COBALT-CHROMIUM-ALUMINUM-HAFNIUM PUBLISHED

EMS-56776 6/27/2003 POWDER, CHROMIUM CARBIDE 25% NICKEL CHRO PUBLISHED

EMS-56777 B 5/18/2007 POWDER, COBALT-32CHROMIUM-2.5HAFNIUM FOR PUBLISHED

EMS-56786 D 3/15/2016 POWDER, COPPER-NICKEL-INDIUM PUBLISHED

EMS-56799 10/25/1990 MAGNESIA ALUMINA SPINEL POWDER PUBLISHED

EMS-56800 A 2/8/1973 MOLYBDENUM WIRE, MOLYBDENUM (99.0 MO) PUBLISHED

EMS-57015 A 7/15/1992 SHAPES, SINTERED, IRON POWDER NON-CURRENT

EMS-57016 B 7/15/1992 SHAPES, SINTERED ALLOY STEEL POWDER IRON NON-CURRENT

EMS-57110 1/14/1987 POWDER METALLURGY HUB DETAILS FOR USE IN PUBLISHED

EMS-57120 10/15/1984 INVESTMENT CAST EQUIAXED AIRFOIL RING DE PUBLISHED

EMS-58900 4/7/1966 CONTINUOUS BORON FILAMENTS PUBLISHED

EMS-58910 B 7/19/1995 BORON FILAMENTS, SILICON CARBIDE COATED NON-CURRENT

EMS-59030 C 2/15/1977 BARS AND FORGINGS, TITANIUM BASE, PUBLISHED

EMS-59034 E 1/28/1981 TITANIUM ALLOY BARS & FORGINGS 11Sn-5Zr- PUBLISHED

EMS-59035 D 9/17/1983 TITANIUM ALLOY BARS & FORGINGS 11Sn-5Zr- PUBLISHED

EMS-59501 H 3/25/2020 TITANIUM ALLOY BAR, FORGINGS AND FORGING PUBLISHED

EMS-59502 G 3/25/2020 TITANIUM ALLOY BAR, FORGINGS & FORGING S PUBLISHED

EMS-59503 F 3/25/2020 TITANIUM ALLOY BAR, FORGINGS & FORGING S PUBLISHED

EMS-59504 C 3/25/2020 TITANIUM ALL0Y BAR, FORGINGS AND FORGING PUBLISHED

EMS-59538 A 12/3/2002 TITANIUM ALLOY BAR, FORGINGS & FORGING S PUBLISHED

EMS-59965 6/15/1984 TITANIUM ALLOY CASTINGS 6Al-2Sn-4Zr-6Mo PUBLISHED

EMS-59970 C 7/13/2013 TITANIUM ALLOY, CAST, 6A1-2SN-4ZR-2MO HO PUBLISHED

EMS-6 J 7/25/2014 PETROLEUM SOLVENT (SOLVENT 140) PUBLISHED

EMS-60010 B 3/18/1965 CUT WIRE SHOT - CARBON STEEL PUBLISHED

EMS-60015 C 4/12/1988 SHOT, HARDENED, CAST STEEL PUBLISHED

EMS-60035 C 7/20/1993 STEEL WIRE - ANNEALED 0.10 MAX. CARBON ( PUBLISHED

72

Specification


EMS-60500 11/9/1971 STEEL WIRE, LOW ALLOY 1.5Cr-4.4Ni-2.0Mo PUBLISHED

EMS-60610 E 2/18/2010 STEEL WIRE, WELDING PUBLISHED

EMS-61240 D 7/17/1995 STEEL SHEET AND STRIP, ALUMINUM COATED H NON-CURRENT

EMS-63960 A 10/28/1966 STEEL, CARBURIZING 4.25Ni-1.15Cr-0.25Mo PUBLISHED

EMS-63962 11/2/1966 STEEL CARBURIZING 4.25Ni-1.15Cr-0.25Mo ( PUBLISHED

EMS-64 H 7/18/1973 FUEL, TURBINE ENGINE, COMMERCIAL AIRCRAF PUBLISHED

EMS-64500 R 2/20/2008 STEEL BARS, FORGINGS, AND FORGING STOCK PUBLISHED

EMS-64550 A 3/18/2014 Cancelled PUBLISHED

EMS-64992 B 7/20/1993 STEEL BARS, FORGINGS, AND MECHANICAL TUB PUBLISHED

EMS-64993 B 7/20/1993 STEEL BARS, FORGINGS, AND MECHANICAL TUB PUBLISHED

EMS-64997 A 8/25/1993 STEEL BARS, FORGINGS & TUBING 1.45 CR (0 PUBLISHED

EMS-65002 C 5/13/1997 BARS, FORGINGS & TUBING, LOW ALLOY STEEL PUBLISHED

EMS-65005 B 10/15/1988 STEEL BARS, FORGINGS, & TUBING 3.25Ni-1. PUBLISHED

EMS-65007 11/18/1992 STEEL BARS, FORGINGS & TUBING 1.2Cr-3.5N PUBLISHED

EMS-65008 A 3/3/1997 STEEL BARS AND FORGINGS 12Cr2.65Ni-1.8Mo PUBLISHED

EMS-65009 B 3/18/2014 STEEL, BARS AND FORGINGS 0.90Si - 1.0Cr PUBLISHED

EMS-65037 B 3/19/1997 STEEL, HIGH STRENGTH LOW ALLOY, CONSUMAB PUBLISHED

EMS-65055 C 7/21/1993 HIGH STRENGTH ALLOY STEEL 10.0W-3.0Cr (0 NON-CURRENT

EMS-65600 D 7/15/1992 STEEL BARS & FORGINGS, NITRIDING 5Cr-0.5 NON-CURRENT

EMS-65605 A 7/15/1992 STEEL BARS AND FORGINGS-NITRIDING 5CR - NON-CURRENT

EMS-65675 A 7/15/1992 STEEL 0.5Mo-0.003B (0.12-0.16C) NON-CURRENT

EMS-66 C 6/17/1993 TURBINE ENGINE FUEL FOR INDUSTRIAL USE PUBLISHED

EMS-67320 A 7/21/1993 STEEL CASTINGS, PRECISION INVESTMENT 0.4 NON-CURRENT

EMS-68520 D 9/21/1992 IRON CASTINGS-MEDIUM HIGH STRENGTH NON-CURRENT

EMS-69000 B 7/21/1993 ALLOY CAST IRON-MEDIUM HIGH STRENGTH CHR NON-CURRENT

EMS-70012 B 7/21/1993 ALLOY WIRE, HEAT & CORROSION RESISTANT N NON-CURRENT

EMS-70013 B 1/24/1973 NICKEL - ALUMINUM COMPOSITE WIRE, 78NI-2 PUBLISHED

EMS-70033 B 4/12/1988 STEEL WIRE, CORROSION RESISTANT (TYPE 42 PUBLISHED

EMS-70230 A 4/1/2010 NICKEL ALLOY, CORROSION AND HEAT RESISTA PUBLISHED

EMS-70242 7/3/1991 LOW EXPANSION NICKEL BASE ALLOY NICKEL-M PUBLISHED

EMS-70610 C 7/21/1993 STEEL SHEET & STRIP, CORROSION & HEAT RE NON-CURRENT

EMS-70755 D 11/27/2002 STEEL SHEET, STRIP & PLATE - CORROSION R PUBLISHED

73

Specification


EMS-70775 9/25/1956 ALLOY SHEET, CORROSION AND HEAT RESISTAN PUBLISHED

EMS-70791 B 10/10/1968 ALLOY SHEET & STRIP, CORROSION & HEAT RE PUBLISHED

EMS-70792 C 7/21/1993 ALLOY SHEET & STRIP, CORROSION & HEAT RE NON-CURRENT

EMS-70793 B 12/5/1983 ALLOY SHEET & PLATE, CORROSION & HEAT RE PUBLISHED

EMS-70794 A 7/17/1995 ALLOY SHEET & PLATE-CORROSION & HEAT RES NON-CURRENT

EMS-70795 B 7/17/1995 ALLOY SHEET, CORROSION & HEAT RESISTANT NON-CURRENT

EMS-70796 9/30/1965 PERMEABLE ALLOY SHEET, CORROSION & HEAT PUBLISHED

EMS-70797 C 7/17/1995 ALLOY SHEET & PLATE, CORROSION & HEAT RE NON-CURRENT

EMS-70798 A 7/17/1995 PERMEABLE ALLOY SHEET (RENE'41) CORROSIO NON-CURRENT

EMS-70799 A 7/17/1995 PERMEABLE ALLOY SHEET (HASTELLOY X) CORR NON-CURRENT

EMS-70801 B 7/17/1995 ALLOY SHEET & STRIP, CORROSION & HEAT RE NON-CURRENT

EMS-70802 A 7/17/1995 ALLOY SHEET & PLATE, CORROSION & HEAT RE NON-CURRENT

EMS-70804 B 12/23/1987 IRON BASE ALLOY, MECHANICALLY ALLOYED, S PUBLISHED

EMS-70805 A 7/17/1995 ALLOY SHEET, CORROSION & HEAT RESISTANT NON-CURRENT


EMS-70807 A 6/1/1988 IRON BASE ALLOY, MECHANICALLY ALLOYED, PUBLISHED

EMS-71005 A 7/15/1992 BRAZING ALLOY, NICKEL BASE, 16.5Cr-4Si-4 NON-CURRENT

EMS-71575 10/31/1958 ALLOY TUBING, WELDED, CORROSION AND HEAT PUBLISHED

EMS-71585 C 7/17/1995 ALLOY TUBING-SEAMLESS-CORROSION & HEAT R NON-CURRENT

EMS-72250 11/19/1955 STEEL, CORROSION AND MODERATE HEAT RESIS PUBLISHED

EMS-72255 9/30/1966 STEEL BARS, FORGINGS, TUBING, AND RINGS PUBLISHED

EMS-72270 D 7/22/1955 STEEL - CORROSION AND MODERATE HEAT RESI PUBLISHED

EMS-72276 9/6/1963 STEEL, CORROSION & MODERATE HEAT RESISTA PUBLISHED

EMS-72330 2/21/1972 STEEL BARS, FORGINGS & TUBING CORROSION PUBLISHED

EMS-72335 B 10/10/1995 STEEL BARS, FORGINGS & TUBING, CORROSION NON-CURRENT

EMS-72340 10/7/1971 STEEL BARS, FORGINGS, AND TUBING, CORROS PUBLISHED

EMS-72610 E 10/17/1968 STEEL, CORROSION AND HEAT RESISTANT 11.7 PUBLISHED

EMS-72611 B 3/12/2014 STEEL, SHAPES, INJECTION MOLDED POWDER, PUBLISHED

EMS-72612 1/21/1977 STEEL BARS,FORGINGS,CORROSION RESISTANT PUBLISHED

EMS-72613 D 7/17/1995 STEEL BARS, FORGINGS & RINGS, CORROSION NON-CURRENT

EMS-72614 D 7/23/1979 STEEL BARS, FORGINGS, & TUBING-CORROSION PUBLISHED

EMS-72616 A 1/18/2006 STEEL, CORROSION-RESISTANT, CUSTOM 450 S PUBLISHED

74

Specification


EMS-72620 F 6/1/1978 STEEL, CORROSION AND MODERATE HEAT RESIS PUBLISHED

EMS-72645 A 3/18/2014 STEEL FORGINGS, CORROSION AND MODERATE H PUBLISHED

EMS-72650 C 4/15/2014 STEEL CORROSION & HEAT RESISTANT 10.6Cr- PUBLISHED

EMS-72700 3/15/2004 STEEL, CORROSION RESISTANT, BARS, WIRE PUBLISHED

EMS-72750 B 7/17/1995 ALLOY - CORROSION AND HEAT RESISTANT IRO NON-CURRENT

EMS-72755 9/25/1956 ALLOY, CORROSION AND HEAT RESISTANT IRON PUBLISHED

EMS-72757 B 6/4/1998 NICKEL-IRON ALLOY, BARS AND FORGINGS LOW PUBLISHED

EMS-72765 5/27/1964 ALLOY BARS, FORGINGS & RINGS, CORROSION PUBLISHED

EMS-72790 1/16/1970 ALLOY BARS&FORGINGS, HEAT RESISTANT IRON PUBLISHED

EMS-72797 C 7/17/1995 ALLOY BARS, FORGINGS & RINGS, CORROSION NON-CURRENT

EMS-73000 J 7/15/1992 STEEL, CORROSION AND HEAT RESISTANT 16Cr NON-CURRENT

EMS-73030 H 7/15/1992 STEEL, CORROSION AND HEAT RESISTANT 16Cr NON-CURRENT

EMS-73080 F 7/15/1992 ALLOY, CORROSION & HEAT RESISTANT COBALT NON-CURRENT

EMS-73101 12/12/1990 NICKEL ALLOY FORGINGS AND STOCK PREM QUA PUBLISHED


EMS-73103 10/17/1997 NICKEL ALLOY FORGINGS, ALLOY 720, POWDER PUBLISHED

EMS-73105 F 8/22/2005 NICKEL ALLOY BAR, FORGINGS AND FORGING S PUBLISHED

EMS-73108 5/31/1995 NICKEL ALLOY FORGINGS, AF2-1DA-6 POWDER PUBLISHED

EMS-73110 A 7/17/1995 ALLOY BARS, FORGINGS & RINGS, CORROSION NON-CURRENT

EMS-73111 E 10/21/2014 NICKEL ALLOY FORGINGS AND FORGING STOCK, PUBLISHED

EMS-73123 E 2/20/1998 NICKEL ALLOY BARS & FORGINGS, CORROSION PUBLISHED

EMS-73165 C 7/15/1992 ALLOY, HEAT & CORROSION RESISTANT NICKEL NON-CURRENT

EMS-73168 E 7/15/1992 ALLOY BARS, FORGINGS & RINGS, CORROSION NON-CURRENT

EMS-73169 C 7/15/1992 ALLOY, CORROSION & HEAT RESISTANT NICKEL NON-CURRENT

EMS-73170 E 7/15/1992 ALLOY BARS & FORGINGS, CORROSION & HEAT NON-CURRENT

EMS-73175 E 7/15/1992 ALLOY BARS & FORGINGS, CORROSION AND HEA NON-CURRENT

EMS-73176 B 7/17/1995 ALLOY, CORROSION AND HEAT RESISTANT NICK NON-CURRENT

EMS-73200 F 7/15/1992 ALLOY BARS, FORGINGS, EXTRUSIONS-NICKEL NON-CURRENT

EMS-73390 1/26/1979 COBALT BASE, NICKEL BASE & IRON BASE ALL PUBLISHED

EMS-73400 1/12/1979 COBALT BASE & NICKEL BASE, VACUUM MELTED PUBLISHED

EMS-73410 1/26/1979 COBALT BASE, NICKEL BASE & IRON BASE, AI PUBLISHED

EMS-73515 B 7/15/1992 STEEL,CASTINGS INVESTMENT,CORROSION RESI NON-CURRENT

75

Specification


EMS-73550 C 7/15/1992 STEEL CASTING, INVESTMENT, CORROSION RES NON-CURRENT

EMS-73601 A 9/30/1985 STEEL CASTINGS,PRECISION INVESTMENT,CORR PUBLISHED

EMS-73613 A 6/12/2015 STEEL CASTINGS, PRECISION INVESTMENT, CO PUBLISHED

EMS-73615 F 4/7/1971 STEEL, CENTRIFUGAL CAST-CORROSION & HEAT PUBLISHED

EMS-73632 J 7/22/1994 NICKEL ALLOY, CASTINGS, INVESTMENT, CORR PUBLISHED

EMS-73634 D 6/12/2015 ALLOY CASTING, INVESTMENT, CORROSION & H PUBLISHED

EMS-73634-1 A 6/12/2015 ALLOY CASTING, INVESTMENT, CORROSION & H PUBLISHED

EMS-73635 B 1/23/1956 ALLOY CASTINGS, PRECISION INVESTMENT - C PUBLISHED

EMS-73636 D 3/16/1961 ALLOY CASTING, PRECISION INVESTMENT-CORR PUBLISHED

EMS-73637 1/31/1961 ALLOY CASTING, PRECISION INVESTMENT - CO PUBLISHED

EMS-73638 A 7/17/1995 ALLOY CASTING, INVESTMENT, CORROSION & H NON-CURRENT

EMS-73640 N 6/12/2015 ALLOY CASTINGS, INVESTMENT - CORROSION A PUBLISHED

EMS-73642 B 7/17/1995 ALLOY CASTINGS-PRECISION INVESTMENT-CORR NON-CURRENT

EMS-73644 1/23/1964 ALLOY CASTINGS, INVESTMENT, CORROSION & PUBLISHED

EMS-73646 D 6/12/2015 ALLOY CASTINGS-INVESTMENT, CORROSION & H PUBLISHED

EMS-73646-1 M 2/15/2021 ALLOY CASTINGS, INVESTMENT, MODEL 250 FI PUBLISHED

EMS-73648-2 L 6/12/2015 ALLOY CASTINGS, INVESTMENT, MODEL 250 SE PUBLISHED

EMS-73648-3 G 6/12/2015 ALLOY CASTINGS, INVESTMENT, MODEL 250 TH PUBLISHED

EMS-73648-4 G 3/3/1997 ALLOY CASTINGS, INVESTMENT, MODEL 250 FO PUBLISHED


EMS-73651 F 6/21/1971 ALLOY CASTING, INVESTMENT, CORROSION AND PUBLISHED

EMS-73654 G 6/3/2004 ALLOY CASTINGS-INVESTMENT-CORROSION AND PUBLISHED


EMS-73657 E 11/27/2002 ALLOY CASTING, INVESTMENT, CORROSION & H PUBLISHED

EMS-73658 8/26/1969 ALLOY CASTING, INVESTMENT, CORROSION & H PUBLISHED

EMS-73659 8/25/1977 ALLOY CASTING, INVESTMENT, CORROSION & H PUBLISHED

EMS-73661 A 6/12/2015 ALLOY CASTING, INVESTMENT, CORROSION & H PUBLISHED


EMS-73665 A 10/31/1997 NICKEL ALLOY, INVESTMENT CAST AIR FOILS PUBLISHED

EMS-73666 3/1/1981 ALLOY CASTINGS,INVESTMENT,CORROSION AND PUBLISHED

EMS-73667 D 6/12/2015 ALLOY CASTINGS, INVESTMENT, CORROSION AN PUBLISHED

EMS-73669 D 1/23/1979 ALLOY CASTINGS, INVESTMENT, CORROSION AN PUBLISHED

76

Specification



EMS-73674 A 7/17/1995 ALLOY CASTING, INVESTMENT, CORROSION AND NON-CURRENT

EMS-73680 F 6/12/2015 ALLOY CASTINGS, INVESTMENT, CORROSION AN PUBLISHED

EMS-73681 B 7/17/1995 ALLOY CASTINGS, INVESTMENT, MODEL 250 FI NON-CURRENT

EMS-73682 6/15/1983 ALLOY CASTINGS, INVESTMENT, MODEL 250 FI PUBLISHED

EMS-73683 B 2/18/2020 ALLOY CASTINGS INVESTMENT, MODEL 250 SEC PUBLISHED

EMS-73684 3/28/1990 ALLOY CASTINGS, INVESTMENT, MODEL 250 FI PUBLISHED

EMS-73685 8/23/1972 ALLOLY CASTINGS INVESTMENT, CORROSION AN PUBLISHED

EMS-73687 D 7/30/2009 NICKEL ALLOY, CAST, DIRECTIONALLY SOLIDI PUBLISHED

EMS-73688 A 9/16/2005 NICKEL ALLOY CASTINGS, INVESTMENT, VACUU PUBLISHED

EMS-73689 A 11/26/2007 INVESTMENT CASTINGS PRODUCED FROM VACUUM PUBLISHED

EMS-73690 8/23/1972 ALLOY CASTINGS, INVESTMENT, CORROSION AN PUBLISHED

EMS-73691 A 12/15/1997 NICKEL ALLOY CASTINGS, DIRECTIONALLY SOL PUBLISHED

EMS-73695 A 6/12/2015 ALLOY CASTINGS INVESTMENT-CORROSION AND PUBLISHED

EMS-73700 A 12/29/1969 ALLOY CASTING-PRECISION INVESTMENT-CORRO PUBLISHED

EMS-73720 A 7/17/1995 ALLOY CASTINGS, INVESTMENT, CORROSION AN NON-CURRENT

EMS-73725 6/6/1961 ALLOY CASTING-PRECISION INVESTMENT CORRO PUBLISHED

EMS-73730 E 4/20/2000 NICKEL ALLOY, CAST, SINGLE CRYSTAL (AF56 PUBLISHED

EMS-73734 G 4/7/2005 NICKEL,ALLOY, CAST, SINGLE CRYSTAL PUBLISHED

EMS-73735 E 9/27/2011 NICKEL ALLOY,CAST,SINGLE CRYSTAL (REF: C PUBLISHED

EMS-73745 11/1/2002 NICKOL ALLOY, CAST, SINGLE CRYSTAL (REF: RR1484) PUBLISHED

EMS-77100 A 4/18/1951 MACHINERY STEEL - LOW CARBON PUBLISHED

EMS-77120 A 4/18/1951 MACHINERY STEEL - MEDIUM CARBON PUBLISHED

EMS-77140 A 4/21/1951 MACHINERY STEEL - MEDIUM CARBON (OIL HAR PUBLISHED

EMS-77160 A 4/21/1951 MACHINERY STEEL - HIGH CARBON (OIL HARDE PUBLISHED

EMS-77700 C 1/24/1956 AIR HARDENING TOOL STEEL 12Cr-0.9Mo-0.5V PUBLISHED

EMS-77720 A 5/10/1951 AIR HARDENING DIE STEEL 5Cr-1C PUBLISHED

EMS-78000 A 5/10/1951 OIL HARDENING - TOOL STEEL (NON-DEFORMIN PUBLISHED

EMS-78050 A 5/10/1951 COLD WORK TOOL STEEL PUBLISHED

EMS-78600 A 5/15/1951 HIGH SPEED STEEL (MOLYBDENUM TYPE) PUBLISHED

EMS-79793B 4/22/1975 ALLOY SHEET AND PLATE, CORROSION & HEAT PUBLISHED

EMS-79800 B 3/9/1959 HEAT RESISTANT ALLOY CASTINGS 35Ni-15Cr PUBLISHED

77

Specification


EMS-79810 B 3/6/1959 HEAT RESISTANT ALLOY CASTINGS 65Ni-15Cr PUBLISHED

EMS-80 A 7/17/1995 FIBERGLASS CHOPPED ROVINGS, POLYESTER IM NON-CURRENT

EMS-83050 A 5/7/1955 FUSION WELDED RINGS AND FLANGES - AUSTEN PUBLISHED

EMS-83060 E 3/15/2016 METALLURGICAL REQUIREMENTS FOR BALL AND PUBLISHED

EMS-83500 E 7/17/1995 CAST IRON SEALING RINGS NON-CURRENT

EMS-85000 P 4/15/1997 STUDS, BOLTS, SCREWS; STEEL, CORROSION R PUBLISHED

EMS-85010 K 4/29/1959 STUDS,BOLTS,SCREWS; STEEL, ALLOY HEAT TR PUBLISHED

EMS-85020 J 4/24/1959 STUDS, BOLTS, SCREWS, LOW ALLOY STEEL HE PUBLISHED

EMS-85025 H 4/29/1959 STUDS, BOLTS, AND SCREWS-LOW ALLOY STEEL PUBLISHED

EMS-85030 J 2/22/1960 BOLTS, SCREWS, AND STUDS; STEEL, CORROSI PUBLISHED

EMS-85035 C 7/17/1995 BOLTS, SCREWS, AND STUDS; ALLOY, CORROSI NON-CURRENT

EMS-85037 A 12/3/1964 BOLTS, SCREWS, AND STUDS; ALLOY, CORROSI PUBLISHED

EMS-85040 C 12/1/1995 STUDS, BOLTS, AND SCREWS, NICKEL ALLOY, PUBLISHED

EMS-85041 A 10/31/1982 BOLTS, SCREWS, AND STUDS, NICKEL ALLOY, PUBLISHED

EMS-85045 4/21/1964 BOLTS AND SCREWS, STEEL, CORROSION RESIS PUBLISHED

EMS-85050 E 9/21/1966 STUDS, BOLTS, AND SCREWS, LOW ALLOY STEE PUBLISHED

EMS-85060 D 9/20/1966 STUDS, BOLTS, AND SCREWS - LOW ALLOY STE PUBLISHED

EMS-9 C 11/4/1955 OIL, EMULSIBLE CUTTING PUBLISHED

EMS-94 6/12/1991 SOLVENT VAPOR DEGREASER (HIGH TEMP) PUBLISHED

EMS-C5000 B 10/24/1997 FILLER MATERIALS - FUSION WELDING & BRAZ PUBLISHED

EMS-C8212 1/6/1960 BARS, TUBING, FORGINGS 16CR 25N 3.95TI 0 PUBLISHED

EPS-10040 AK 4/15/2020 COATING ALUMINUM-MANGANESE-CHROMIUM, ELE PUBLISHED

EPS-10041 C 6/10/2005 COATING,ALUMINIDE,GAS PHASE PUBLISHED

EPS-10042 C 8/25/2011 COATING, TWO PHASE, PLATINUM ALUMINIDE ( PUBLISHED

EPS-10043 C 3/14/2005 COATINGS, TWO PHASE, PLAATINUM ALUMINIDE PUBLISHED

EPS-10044 E 2/17/2020 COATING, PLATINUM ALUMINIDE, GAS PHASE PUBLISHED

EPS-10045 A 11/26/2002 COATING, INTERNAL ALUMINIDE, SLURRY PUBLISHED

EPS-10046 B 2/18/2010 COATINGS, HIGH-TEMP LOW-ACTIVITY ALUMINI PUBLISHED

EPS-10050 E 7/22/1991 FLUOBORATE NICKEL PLATING AS A BONDING M PUBLISHED

EPS-10080 D 8/31/1995 SURFACE PREPARATION OF FERRITIC AND AUST PUBLISHED

EPS-10090 C 7/20/1993 APPLICATION OF COBALT/CHROMIUM CARBIDE W PUBLISHED

EPS-10105 B 6/6/2001 COATING, BLACKOXIDE CONVERSION, FOR SELE PUBLISHED

78

Specification


EPS-10110 G 2/20/1993 COMPOSITION LEAD-TIN COATING ALLOY NON-CURRENT

EPS-10115 E 8/13/2009 PLATING, BRONZE PUBLISHED

EPS-10142 10/20/1992 COATING, CHROMIUM THIN, DENSE, NODULAR PUBLISHED

EPS-10222 A 9/24/1998 PLATING,COPPER,NON-CYANIDE PUBLISHED

EPS-10223 B 6/1/2009 COPPER PLATING PUBLISHED

EPS-10224 9/28/1953 BRUSH OR TOUCH-UP CADMIUM PLATING PUBLISHED

EPS-10229 D 1/19/2016 COATING ALUMINUM-CHROMIUM-SILICON SLURRY PUBLISHED

EPS-10235 R 9/24/1998 PLATING, NICKEL-CADMIUM, DIFFUSED PUBLISHED

EPS-10243 1/14/1974 COPPER PLATING - BRUSH APPLIED PUBLISHED

EPS-10245 B 1/29/1998 PLATING, NICKEL - BRUSH APPLIED PUBLISHED

EPS-10246 H 1/25/2021 COATING, PLATINUM-SILICON-ALUMINUM-ELECT PUBLISHED

EPS-10248 C 10/23/2012 PLATING, SILVER, OF TITANIUM ALLOYS FOR PUBLISHED

EPS-10249 R 1/25/2021 COATING, PLATINUM-SILICON-ALUMINUM ELECT PUBLISHED

EPS-10251 A 10/23/2012 DALIC SILVER PLATING OF SILVER PLATED SU PUBLISHED

EPS-10252 E 11/6/2006 COATING, ONE STEP, PLATNUM-SILICONE-ALUM PUBLISHED

EPS-10253 C 3/3/1997 INDIUM PLATING PUBLISHED

EPS-10310 D 2/22/2008 PLATING CHROMIUM PUBLISHED

EPS-10410 A 7/17/1995 PLASMA SPRAY COATING-NICKEL-CHROMIUM- BO NON-CURRENT

EPS-10411 B 6/7/2002 COATING PROCESS,THERMAL SPARY,HYPERVELOC PUBLISHED

EPS-10412 A 7/20/2011 COATING PROCESS, ELECTRO SPARK PUBLISHED

EPS-10413 2/23/1996 COATING, THERMAL SPRAY PUBLISHED

EPS-10414 3/18/1997 COATING, THERMAL SPRAY, HVOF, TUNGSTEN C PUBLISHED

EPS-10415 A 3/3/1997 COATING, THERMAL BARRIER, PLASMA SPRAY M PUBLISHED

EPS-10416 8/29/1997 COATING, THERMAL SPRAY, HVOF, CHROMIUM C PUBLISHED

EPS-10417 9/19/2000 COATING, FLAME SPRAY NICKEL-ALUMINUM COM PUBLISHED

EPS-10418 B 5/15/2019 COATING, FLAME SPRAY NICRAL BENTONITE CO PUBLISHED

EPS-10419 9/19/2000 COATING, THERMAL SPRAY, HVOF, ALUMINUM O PUBLISHED

EPS-10420 E 10/24/1995 COATING, PLASMA SPRAY, ALUMINUM-POLYESTE PUBLISHED

EPS-10422 A 9/19/1995 COATING, PLASMA-SPRAY, ALUMINUM POLYMIDE PUBLISHED

EPS-10423 D 7/18/2013 COATING, PLASMA SPRAY, ALUMINUM-SILICON, PUBLISHED

EPS-10425 8/9/2005 COATING,PLASMA SPRAY, ALUMINUM-SILICON,P PUBLISHED

EPS-10430 C 6/15/1984 PLASMA SPRAY COATNG NICKEL-ALUMINUM COMP PUBLISHED

79

Specification


EPS-10432 B 6/15/1984 FLAME SPRAY COATING-NICKEL ALUMINUM COMP PUBLISHED

EPS-10434 E 6/15/1984 FLAME SPRAY COATING 75% NICKEL-25% GRAPH PUBLISHED

EPS-10436 M 6/21/2016 FLAME SPRAY COATING 85% NICKEL - 15 GRAP PUBLISHED

EPS-10437 E 7/17/1995 PLASMA SPRAY COATING 85 NICKEL - 15 GRAP NON-CURRENT

EPS-10439 A 6/15/1984 FLAME SPRAY COATING NICKEL-CHROMIUM-ALUM PUBLISHED

EPS-10441 4/22/1992 COATING, NICKEL-ALUMINUM, PLASMA SPRAYED PUBLISHED

EPS-10456 P 6/19/1992 COATING, FLAME SPRAY ALUMINUM ALLOY (404 PUBLISHED

EPS-10460 W 8/26/1999 COATING, FLAME SPRAY-ALUMINUM ALLOY (404 PUBLISHED

EPS-10462 3/10/2000 COATING, PLASMA SPRAY CoNiCrAlY/BORON NI PUBLISHED

EPS-10463 11/2/1994 COATING, PLASMA SPRAY, ALUMINUM BRONZE PUBLISHED

EPS-10464 H 8/13/2009 COATING, FLAME SPRAY ALUMINUM BRONZE PUBLISHED

EPS-10466 B 2/4/1982 FLAME SPRAY COATING LOW ALLOY STEEL PUBLISHED

EPS-10471 1/28/1994 COATING, ALUMINUM OXIDE, PLASMA SPRAY LA PUBLISHED

EPS-10472 11/15/1990 PLASMA SPRAY COATING NICKEL CHROMIUM COM PUBLISHED

EPS-10473 J 5/17/2016 PLASMA SPRAY COATING - 88 TUNGSTEN CARBI PUBLISHED

EPS-10474 C 5/17/2016 PLASMA SPRAY COATING CHROMIUM CARBIDE PUBLISHED

EPS-10475 E 8/19/2014 COATING, PLASMA SPRAY, ALUMINUM OXIDE PUBLISHED

EPS-10478 F 3/23/1995 COATING, PLASMA SPRAY ALUMINUM-GRAPHITE PUBLISHED

EPS-10479 E 5/1/2007 COATING, PLASMA SPRAY, 8% YTTRIA STABILI PUBLISHED

EPS-10481 1/25/1988 PLASMA SPRAY COATING-12% SILICON-ALUMINU PUBLISHED

EPS-10482 B 5/1/2007 COATING, PLASMA SPRAY, 8% YTTRIA STABILI PUBLISHED

EPS-10483 A 8/27/1998 COATING,PLASMA SPRAY,TRIBALOY T-800 PUBLISHED

EPS-10484 8/27/1998 COASTING,PLASMA SPRAY, TRIBALOY T-400 PUBLISHED

EPS-10486 B 3/3/1997 COATING, CU-NI-IN, PLASMA SPRAYED PUBLISHED

EPS-10487 1/12/2007 COATING, PLASMA SPRAY, ZIRCONIA, STABILI PUBLISHED

EPS-10489 A 8/13/1992 COATING PROCESS, CU+NI+IN ANTI FRETTAGE NON-CURRENT

EPS-10492 A 3/25/1968 FLAME PLATING OF MIXED TUNGSTEN CHROMIUM PUBLISHED

EPS-10493 A 3/25/1968 FLAME PLATING TUNGSTEN/EXTRA STRONG/ CAR PUBLISHED

EPS-10494 C 11/3/1976 TUNGSTEN CARBIDE COATING 85WC - 15Co PUBLISHED

EPS-10496 C 2/4/1982 FLAME SPRAY COATING MOLYBDENUM PUBLISHED

EPS-10497 5/21/1975 FLAME PLATING-CHROMIUM CARBIDE PLUS NICK PUBLISHED

EPS-10498 F 4/19/2016 PLASMA SPRAY MOLYBDENUM COATING EMS-5670 PUBLISHED

80

Specification


EPS-10499 7/14/1981 MAGNESIA-ALUMINA SPINEL PLASMA SPRAY PUBLISHED

EPS-10500 B 10/3/1958 HARD FACING SPRAY COATING ON TURBO-PROP COMPRESSOR WHEELS PUBLISHED

EPS-10501 3/11/1985 DETONATION PROCESS CU-NI-IN ANTI FRETTAG PUBLISHED

EPS-10502 D 8/29/1997 COATING, DETONATION PROCESS (UCAR L-103) PUBLISHED

EPS-10503 A 11/10/1987 COATING, DETONATION PROCESS (UCAR LCO-17 PUBLISHED

EPS-10504 A 2/4/1982 FLAME SPRAY COATING CORROSION-RESISTANT PUBLISHED

EPS-10505 H 2/4/1982 FLAME SPRAY COATING CORROSION RESISTANT PUBLISHED

EPS-10506 A 5/16/2007 PLASMA DEPOSITION COATING ZR02/CO-NI-CR- PUBLISHED

EPS-10508 A 5/16/2007 PLASMA DEPOSITION COATING PUBLISHED

EPS-10540 C 4/19/2006 COATING, PLASMA SPRAY, ALUMINUM-GRAPHITE PUBLISHED

EPS-10550 2/10/1984 PLASMA SPRAY COATING NICKEL-CHROMIUM-ALU PUBLISHED

EPS-10555 G 10/7/2005 COATING, OVERLAY Co-26Cr-9Al-0.35Y (ELEC PUBLISHED

EPS-10556 A 10/17/1997 COATING OVERLAY Ni-24Co-18Cr-12Al-0.3Y ( PUBLISHED

EPS-10560 11/2/1984 APPLICATION OF HASTELLOY X POWDER BY LOW PUBLISHED

EPS-10570 9/23/2003 COATING, LOW PRESSURE PLASMA SPRAY (LPPS PUBLISHED

EPS-10575 B 3/12/2007 COATING, LOW PRESSURE PLASMA SPRAY PUBLISHED

EPS-10638 F 1/8/1993 ALUMINUM PACK COATING OF EMS73657(INC073 PUBLISHED

EPS-10642 B 5/18/2007 COATING, ALUMINUM-MANGANESE SLURRY,OF NI PUBLISHED

EPS-10644 A 10/4/1990 ALUMINUM SLURRY COATING OF NICKEL BASE B PUBLISHED

EPS-10646 P 11/4/1993 COATING, ALUMINUM PACK, IRON, OR NICKEL PUBLISHED

EPS-10649 G 6/8/2005 COATING, ALUMINUM-MANGANESE SLURRY, OF N PUBLISHED

EPS-10652 A 8/13/1992 DIFFUSED CHROMIUM COATING OF NICKEL BASE NON-CURRENT

EPS-10654 U 12/16/2014 COATING, ALUMINUM-CHROMIUM, ELETROPHORET PUBLISHED

EPS-10658 A 2/26/1997 COATING, ALUMINIDE (CHROMALLOY RT 19) PUBLISHED

EPS-10670 G 7/20/1993 COATING, DIFFUSED ALUMINUM THERMOCOUPLE PUBLISHED

EPS-10672 A 8/19/2014APPLICATION OF A CHROME-FREE, CORROSION-RESISTANT ALUMINUM

COATING (ALSEAL 5000)PUBLISHED

EPS-10673 A 8/19/2014APPLICATION OF A CHROME-FREE, CORROSION-RESISTANT ALUMINUM

COASTING (ALSEAL 5000PUBLISHED

EPS-10675 E 5/15/2019 COATING, ALUMINUM CORROSION AND HEAT RES PUBLISHED

EPS-10676 J 5/15/2019 COATING, ALUMINUM CORROSION AND HEAT RES PUBLISHED

EPS-10678 E 5/15/2019 COATING, ALUMINUM CORROSION AND RUB TOLE PUBLISHED

81

Specification


EPS-10682 D 5/15/2019 COATING, ALUMINUM, WITH TOP COAT, CORROS PUBLISHED

EPS-10683 E 5/15/2019 ALUMINUM COATING, WITH TOP COAT, CORROSI PUBLISHED

EPS-10690 C 11/18/1999 COATING, ALUMINUM, ION VAPOR DEPOSITION PUBLISHED

EPS-10700 B 5/17/1995 COATING, DIFFUSED ALUMINUM LOW TEMPERATU PUBLISHED

EPS-10702 A 2/22/1991 COATING, DIFFUSER ALUMINIDE LOW TEMPERAT PUBLISHED

EPS-10705 E 9/14/2014 COATING, TITANIUM NITRIDE, PHYSICAL VAPO PUBLISHED

EPS-10710 B 12/21/2009 COATING, THERMAL BARRIER YTTRIA STABALIZ PUBLISHED

EPS-10711 F 6/20/2015 COATING, THERMAL BARRIER, YTTRIA STABILI PUBLISHED

EPS-11250 D 5/28/1998 PASSIVATION AUSTENITIC HEAT & CORROSION PUBLISHED

EPS-11260 2/23/1968 PROTECTIVE COATING FOR ELECTRIC CIRCUIT PUBLISHED

EPS-11270 A 10/10/1995 APPLICATION EPOXY RESIN PRIMER NON-CURRENT

EPS-11290 A 7/17/1995 APPLICATION WHITE EPOXY ENAMEL NON-CURRENT

EPS-11295 C 7/17/1995 APPLICATION OF TWO COMPONENT URETHANE PA NON-CURRENT

EPS-11296 B 7/17/1995 FIBERGLASS CLOTH, EPOXY RESIN IMPREGNATE NON-CURRENT

EPS-11299 7/31/2007 INSTALLATION OF BONDED NUTPLATES PUBLISHED

EPS-11300 J 5/15/2019 APPLICATION OF EMS 26700 HEAT AND CORROS PUBLISHED

EPS-11303 J 5/20/2014 EMS 26725 CORROSION PROTECTIVE PAINT APP PUBLISHED

EPS-11304 K 9/25/2014 APPLICATION OF CORROSION RESISTANT PAINT PUBLISHED

EPS-11307 B 11/19/1979 BLACK CORROSION PROTECTIVE PAINT APPLICA PUBLISHED

EPS-11310 M 6/6/1969 APPLICATION OF EMS 26710 HEAT AND CORROS PUBLISHED

EPS-11311 B 9/5/1977 EPOXY ENAMEL, CORROSION PROTECTIVE 525F PUBLISHED

EPS-11312 D 7/17/1995 ALUMINUM PAINT, CORROSION AND HEAT RESIS NON-CURRENT

EPS-11315 F 1/28/1959 APPLICATION OF EMS-26710 HEAT AND CORROS PUBLISHED

EPS-11316 C 7/17/1995 FIBERGLASS CLOTH-EPOXY RESIN IMPREGNATED NON-CURRENT

EPS-11317 D 5/16/2007 EPOXY ADHESIVE FORMULATION-GENERAL APPLI PUBLISHED

EPS-11317-10 A 8/27/1992 EPOXY ADHESIVE FORMULATION-GENERAL APPLI PUBLISHED

EPS-11317-11 B 4/15/2005 ADHESIVE, EPOXY, GENERAL APLICATION FOR PUBLISHED

EPS-11317-2 A 8/27/1992 EPOXY ADHESIVE FORMULATION-GENERAL APPLI PUBLISHED

EPS-11317-9 B 8/16/2001 GENERAL APPLICATIONS - EPOXY ADHESIVE FO PUBLISHED

EPS-11318 H 5/15/2019 ALUMINUM COATING, CORROSION AND HEAT RES PUBLISHED

EPS-11319 H 5/15/2019 ALUMINUM COATING, CORROSION HEAT RESISTA PUBLISHED

EPS-11320 D 7/17/1995 APPLICATION OF EMS 29510 HEAT AND CORROS NON-CURRENT

82

Specification


EPS-11321 B 7/17/1995 APPLICATION OF ABRADABLE SEAL COMPOUND S NON-CURRENT

EPS-11322 E 10/21/2013 PROTECTIVE COATING FOR METALS FLUOROCARB PUBLISHED

EPS-11323 E 8/13/1992 ABRADABLE SEAL COMPOUND,ALUMINUM-FILLED PUBLISHED

EPS-11324 C 7/17/1995 ABRADABLE SEAL COMPOUND - EPOXY RESIN GR NON-CURRENT

EPS-11325 C 12/16/1958 GRAPHITE-SILICONE SEALER COMPOUND-APPLIC PUBLISHED

EPS-11326 C 7/17/1995 PLASTIC FOAM SEALER-APPLICATION TO MODEL NON-CURRENT

EPS-11327 B 7/17/1995 APPLICATION OF PLASTIC SEAL MATERIAL MOD NON-CURRENT

EPS-11328 C 9/5/1968 EPOXY RESIN SEALER, ALUMINA FILLED APPLI PUBLISHED

EPS-11328-1 B 4/1/1971 EPOXY RESIN SEALER, TALC FILLED APPLICAT PUBLISHED

EPS-11331 E 8/13/1992 ABRADABLE SEAL COMPOUND, TALC FILLED EPO NON-CURRENT

EPS-11333 K 9/4/2020 ALUMINUM SEALANT COMPOUND-RETENTION OF V PUBLISHED

EPS-11334 E 8/13/1992 ASBESTOS-ALUMINUM SILICONE CEMENT APPL F NON-CURRENT

EPS-11342 C 7/17/1995 ABRADABLE SEAL COMPOUND EPOXY RESIN-TALC NON-CURRENT

EPS-11344 L 6/24/2009 ABRADABLE SEAL COMPOUND, TALC-GRAPHITE F PUBLISHED

EPS-11347 B 8/13/1992 APPLICATION OF SILICONE RUBBER COMPOUND NON-CURRENT

EPS-11350 D 8/13/1992 PROTECTIVE COATING FOR ALUMINUM RESIN BA PUBLISHED

EPS-11354 C 8/13/1992 ABRASION RESISTANT COATING BUNA-N-TYPE PUBLISHED

EPS-11355 A 8/13/1992 APPLICATION OF MOISTURE AND FUNGUS RESIS PUBLISHED

EPS-11358 1/4/1981 APPLICATION OF EPOXY PAINT TO COMPRESSOR PUBLISHED

EPS-11359 5/25/1990 APPLICATION OF GLASS MICROSPHERE FILLED PUBLISHED

EPS-11361 A 7/17/1995 APPLICATION OF PROTECTIVE COATING-VINYL NON-CURRENT

EPS-11364 E 6/24/2009 ABRADABLE SEAL COMPOUND, TALC-GRAPHITE F PUBLISHED

EPS-11365 F 7/17/1995 APPLICATION OF VISCO ELASTIC MATERIAL FO NON-CURRENT

EPS-11366 D 7/17/1995 APPLICATION OF VISCO ELASTIC MATERIAL FO NON-CURRENT

EPS-11390 4/16/1971 HI TEMP RESIST EPOXY RESIN ADHESIVE PUBLISHED

EPS-11400 E 8/21/2009 APPLICATION OF AMS-3132 PERMANENT RESIN PUBLISHED

EPS-11430 AJ 9/1/2017 COATING, PERMANENT RESIN PUBLISHED

EPS-11435 A 4/27/2009 COATING, EPOXY, LOW VOC,CORROSION RESISTANT PUBLISHED

EPS-11450 E 2/10/1976 DECALCOMANIAS, APPLICATION TO PAINTED & PUBLISHED

EPS-11470 A 8/16/2016 APPLICATION PROCEDURE FOR SELF-ADHESIVE LABELS PUBLISHED

EPS-11700 D 7/17/1995 APPLICATION OF GRAPHITE FILM TO COMPRESS NON-CURRENT

EPS-11705 C 3/9/1972 INORGANIC ANTI-FRETTING COATING APPLICAT PUBLISHED

83

Specification


EPS-11706 A 11/15/1974 COATING, INORGANIC ANTI-FRETTING APPLICA PUBLISHED

EPS-11708 A 6/8/1994 APPLICATION OF DRYFILM/CERAMIC COATING PUBLISHED

EPS-11709 1/3/1994 COATING, DRY FILM LUBRICANT, CERAMIC BAS PUBLISHED

EPS-11710 B 11/7/1988 APPLICATION OF SURFACE BONDED LUBRICANT PUBLISHED

EPS-11712 F 4/15/2014 APPLICATION OF MATRIX BONDED LUBRICANT PUBLISHED

EPS-11715 J 3/4/2002 APPLICATION OF SURFACE BONDED LUBRICANT PUBLISHED

EPS-11717 B 34897 APPLICATION OF MOLYBDENUM DISULFIDE LUBR NON-CURRENT

EPS-11718 3/1/1982 APPLICATION OF MOLYBDENUM DISULFIDE LUBR PUBLISHED

EPS-11719 A 37455 COATING, DRY FILM LUBRICANT, AMFSN PUBLISHED

EPS-11720 E 7/9/1969 SURFACE BOND LUBRICANT APPLICATION PUBLISHED

EPS-11721 A 7/18/2002 COATING, DRY FILM LUBRICAT, AMFSN + SILO PUBLISHED

EPS-11722 B 8/11/1975 SURFACE BONDED LUBRICANT APPLICATION PUBLISHED

EPS-11723 A 7/18/2002 COATING, DRY FILM LUBRICANT,AMFSN + SILO PUBLISHED

EPS-11730 B 7/17/1995 ANTI-FRETTING COATING APPLICATION NON-CURRENT

EPS-11785 C / / BRUSH APPLIED CHEMICAL TOUCH-UP OF ABRAD PUBLISHED

EPS-11795 B 2/26/1959 BLACK ANODIC TREATMENT - ALUMINUM BASE A PUBLISHED

EPS-11805 B / / COATING FOR ALUMINUM AND ALUMINUM ALLOY PUBLISHED

EPS-11820 L 1/22/2008 COATING, ELECTROLYTIC, FOR MAGNESIUM (HA PUBLISHED

EPS-11821 12/20/2002 COATING, ELECTROLYTIC-FOR MAGNESIUM (300 PUBLISHED

EPS-11822 C 7/11/2018COATING, ROCKHARD - RESING AND PAINTING PROCESS FOR MAGNESIUM

93007 FRONT FRAME)PUBLISHED

EPS-11840 D 4/23/1998 SEALED CHROME-PICKLE COATING FOR MAGNESI PUBLISHED

EPS-12000 J 7/25/2012 GRIT BLASTING, PROCESS CONTROL PUBLISHED

EPS-12005 D 4/30/2007 BLASTING, DRY GLASS BEAD, ELECTROLESS NI PUBLISHED

EPS-12006 C 10/10/2005 GLASS BEAD PEENING COMPRESSOR WHEELS AND PUBLISHED

EPS-12010 D 7/17/1995 GRIT BLASTING-ALUMINUM IMPELLER FORGINGS NON-CURRENT

EPS-12012 D 7/25/2012 DRY HONING-ALUMINUM OXIDE ABRASIVE PUBLISHED

EPS-12013 A 7/25/2012 DRY HONING /GLASS BEAD ABRASIVE/ PUBLISHED

EPS-12015 F 7/25/2012 GRIT BLASTING, DRY, STEEL SURFACES PUBLISHED

EPS-12016 B 7/25/2012 GRIT BLASTING, DRY METALLIC GRIT PUBLISHED

EPS-12017 D 7/25/2012 GRIT BLASTING OF LIGHTWEIGHT HARNESS FIT PUBLISHED

EPS-12020 B 5/26/1956 GRIT BLASTING, WET-325 GRIT SILICA PUBLISHED

84

Specification


EPS-12025 A 7/17/1995 GRIT BLASTING, WET (HYDRAULIC) NON-CURRENT

EPS-12030 K 7/25/2012 GRIT BLASTING-ALUMINUM OXIDE, SURFACE CO PUBLISHED

EPS-12040 2/21/1956 SOFT GRIT BLASTING (GRAVITY FED) PUBLISHED

EPS-12050 9/24/1955 ROTO-TUMBLING - COMPRESSOR ROTOR BLADES PUBLISHED

EPS-12052 B 10/14/1969 VIBRO-TUMBLING PUBLISHED

EPS-12053 E 10/18/2011 VIBRATORY FINISHING CHEMICAL/MEDIA PUBLISHED

EPS-12060 A 11/12/1990 HARDERIZING OF TURBINE BLADES & VANE SEG PUBLISHED

EPS-12075 K 9/17/2013 GLASS BEAD PEENING OR BLASTING PUBLISHED

EPS-12076 A 7/17/1995 GLASS BEAD PEENING - MODEL 912 HP COMPRE NON-CURRENT

EPS-12077 A 7/17/1995 GLASS BEAD PEENING MODEL 912 HP COMPRESS NON-CURRENT

EPS-12110 B 5/15/1959 STABILIZATION - CUT WIRE SHOT PUBLISHED

EPS-12120 E 3/13/1969 SHOT PEENED FINISH (MISCELLANEOUS STEEL PUBLISHED

EPS-12125 E 2/17/1971 SHOTPEENING CUT WIRE OR CAST STEEL SHOT- PUBLISHED

EPS-12130 F 10/6/1995 MEASUREMENT OF SHOT PEENING INTENSITY PUBLISHED

EPS-12135 F 11/18/2002 MEASUREMENT AND DISPOSITION OF USED PEEN PUBLISHED

EPS-12140 F 4/30/1965 SHOT PEENING - GEARS CUT WIRE OR CAST ST PUBLISHED

EPS-12176 H 2/17/2015 SHOT PEENING, CAST STEEL SHOT PUBLISHED

EPS-12180 E 5/4/1965 SHOTBLASTING-SCALE REMOVAL-STEEL PARTS PUBLISHED

EPS-12240 B 10/7/1969 PEENING PROCEDURE FOR TF41 TITANIUM ALLO PUBLISHED

EPS-12250 C 7/17/1995 SHOT PEENING - TITANIUM ALLOY COMPRESSOR NON-CURRENT

EPS-12251 A 7/17/1995 PEENING PROCEDURE FOR MODEL 912 TURBINE NON-CURRENT

EPS-12252 A 7/17/1995 PEENING MODEL 912 HP TURBINE WHEELS AND NON-CURRENT

EPS-12255 A 8/19/1970 GLASS BEAD PEENING TITANIUM BASE ALLOY C PUBLISHED

EPS-12300 9/30/1999 SPLIT SLEECE COLD EXPANSION PROCESS PUBLISHED

EPS-12400 C 11/2/1960 BARREL FINISHING PUBLISHED

EPS-12510 B 7/17/1995 CROSS WORKING, FORGING STOCK - SINGLE UP NON-CURRENT

EPS-12610 B 8/4/1958 SURFACE SEALING OF ALUMINUM CASTINGS (SO PUBLISHED

EPS-12700 F 8/3/1998 REPAIR WELDING, CORROSION & HEAT RESISTA PUBLISHED

EPS-12702 A 9/26/1958 MINOR REPAIR WELDIN OF TURBOPROP COMPRES PUBLISHED

EPS-12705 C 7/17/1995 WELDING REPAIR, AMS-5395 CASTINGS NON-CURRENT

EPS-12730 10/10/1952 REPAIR OF ALUMINUM ALLOY CASTINGS BY PEE PUBLISHED

EPS-12802 A 3/3/1997 HOT ISOSTATIC PRESSING PROCEDURE FOR DEN PUBLISHED

85

Specification


EPS-12806 7/11/1995 HOT ISISTATIC PRESSING PROCEDURE FOR DEN PUBLISHED

EPS-12810 D 2/4/1999 HOT ISOSTATIC PRESS PROCEDURE FOR DENSIF PUBLISHED

EPS-12812 12/14/1987PROCESSING AND INSPECTION REQUIREMENTS, DIFFUSION BONDING OF

LAMILLOY PANEL ASSEPUBLISHED

EPS-12816 10/15/1984CONTACT BOND PROCESS FOR FABRICATION OF AXIAL DUAL PROPERTY

TURBINE ROTORS. PUBLISHED

EPS-12820 V 7/15/2019 IMPREGNATION OF POROUS CASTINGS PUBLISHED

EPS-12825 A 8/13/1992 ETCHING-CRITICAL MAGNESIUM CASTINGS NON-CURRENT

EPS-12828 C 5/22/2012 ETCHING OF CRITICAL ALUMINUM CASTINGS NON-CURRENT

EPS-13015 A 8/13/1992 CHEMICAL ETCHING-TYPE 410 STEEL CASTINGS NON-CURRENT

EPS-13027 B 7/17/1995 ETCHING TO REMOVE SURFACE GLASS FIBRES F NON-CURRENT

EPS-13030 C 8/13/1992 CHEMICAL TREATMENT FOR DETECTION OF EXPO NON-CURRENT

EPS-13031 4/22/1992 ETCHING PROCEDURE, CMSX-3 SINGLE CRYSTAL VERIF. PUBLISHED

EPS-13035 J 4/3/1970 ETCHING OF TURBINE VANES & BLADES PUBLISHED

EPS-13036 A 3/23/1971SUPEROXOL ETCHING INTEGRAL TURBINE WHEEL AND/OR BLADES AND

VANES PUBLISHED

EPS-13042 E 8/3/1990 ACID CLEANING, OF TITANIUM (COMPRESSOR B PUBLISHED

EPS-13043 A 7/22/2011 CHEMICAL ETCHING OF TITANIUM FORGINGS PUBLISHED

EPS-13045 A 5/1/2012 CHEMICAL ETCHING OF NICKEL BASE ALLOY PA PUBLISHED

EPS-13055 6/3/1960 ACID PICKLING PROCESS FOR STEEL PARTS PUBLISHED

EPS-13062 A 7/17/1995 ELECTROPOLISHING OF TURBINE BLADES NON-CURRENT

EPS-13065 D 6/24/2009 SOLUTION MACHINING-HARDENED CARBON & LOW PUBLISHED

EPS-13066 F 6/24/2009SOLUTION MACHINING-CASE HARDENED PROTUBE CANCELLED -

SUPERSEDED BY EPS-13065 PUBLISHED

EPS-13067 B 3/19/1997 SOLUTION MACHINING NITRIDED STEELS PUBLISHED

EPS-13068 F 4/15/1997 SOLUTION MACHINE 12 CR ALLOY STEELS NON-CURRENT

EPS-13070 B 7/17/1995 SOLUTION MACHINING OF ALUMINUM ALLOY PAR NON-CURRENT

EPS-13075 3/2/1964 SOLUTION MACHINING TITANIUM & TITANIUM A PUBLISHED

EPS-13077 B 3/19/1997 SOLUTION MACHINING HEAT RESISTANT ALLOYS PUBLISHED

EPS-13078 12/14/1987PROCESSING AND INSPECTION REQUIRMENTS, CHEMICAL MACHING OF

INDIVIDUAL SHEETS FORPUBLISHED

EPS-13079 B 3/3/1997 PROCESSING, DIFFUSION BONDING, OF LAMINA PUBLISHED

86

Specification


EPS-13082 11/20/1995 DIFFUSION BONDING OF MT-FIN COMPONENTS PUBLISHED

EPS-13093 12/14/1987 PROCESSING AND INSPECTION REQUIREMENTS, PUBLISHED

EPS-13094 5/14/1993 PROCESSING AND QUALITY REQUIREMENTS, PHO PUBLISHED


EPS-13098 A 4/21/2010 PROCESSING AND INSPECTION REQ FOR LASER PUBLISHED

EPS-13100 10/24/1994 ELECTROCHEMICAL HOLE DRILLING OF SUPERAL PUBLISHED

EPS-13122 9/24/2003 POLISHING & INSPECTION REQ. FOR PREPERAT PUBLISHED

EPS-13123 9/24/2003 PROCESSING AND INSPECTION REQUIREMENTS E PUBLISHED

EPS-13124 9/24/2003 PROCESSING AND INSPECTION REQ. FOR HOLE PUBLISHED

EPS-13125 9/24/2003NICKEL PLATING AND INSPECTION REQUIREMENTS FOR PREPARATION OF

INDIVIDUAL SHEET DPUBLISHED

EPS-13126 9/24/2003 BLONDING, DIFFUSION, OF LAMINATED PANEL PUBLISHED

EPS-13150 B 11/29/2019 CASTBOND VANE-PREPARATION,BONDING AND INSPECTION PUBLISHED

EPS-13200 A 3/15/2016 TECHNICAL CONTROL OF SPECIAL MACHINING P PUBLISHED

EPS-14024 11/14/1969 CERAMIC CORE FABRICATION, GRAVITY CAST 2 PUBLISHED

EPS-14025 12/8/1969 CERAMIC CORE FABRICATION TRANSFER MOULD PUBLISHED

EPS-14063 B 11/5/1992 FABRICATION OF T56/501 MODEL PROP BRAKE PUBLISHED

EPS-14064 B 8/28/2001 ADHESIVE BONDING GRAPHITAR CARBON TO STE PUBLISHED

EPS-14115 A 7/17/1995 BORON FILAMENT - EPOXY RESIN COMPOSITE R NON-CURRENT

EPS-14130 E 11/25/2008 CASTING RESIN FOR EMBEDMENTS NON-TEMPERA PUBLISHED

EPS-14132 10/26/1970 SILICONE RUBBER FOAM PUBLISHED

EPS-14133 A 7/17/1995 SILICONE RUBBER FOAM APPLICATION NON-CURRENT

EPS-14135 B 7/17/1995 FOAM-IN-PLACE PACKAGING URETHANE FOAM SY NON-CURRENT

EPS-14145 2/20/1970 PROCEDURE FOR PLASTIC FILL-IN FOR VOIDS PUBLISHED

EPS-14150 G 11/25/2008 CASTING RESIN FOR EMBEDMENTS PUBLISHED

EPS-14151 A 7/17/1995 SILICONE RESIN FILLER FILLING OF WIRING NON-CURRENT

EPS-14153 A 7/17/1995 POTTING OF B-4 PROPELLER GENERATOR HUB NON-CURRENT

EPS-14154 A 7/17/1995 SEALING POTTING OR ENCAPSULATING NON-CURRENT

EPS-14155 C 5/17/2007 RTV SILICONE RUBBER APPLICATION FOR POTT PUBLISHED

EPS-14156 2/28/1968 MOLDING OF HIGH TEAR STRENGTH SILICONE R PUBLISHED

EPS-14160 E 3/8/2019 THERMOSETTING ADHESIVE HIGH STRENGTH PUBLISHED

EPS-14165 M 6/8/2009 THERMOSETTING ADHESIVE/ONE COMPONENT HIG PUBLISHED

87

Specification


EPS-14166 D 7/6/2011 FORMULATION AND APPLICATION OF EPOXY RES PUBLISHED

EPS-14167 C 12/3/2002 APPLICATION OF ALUMINUM EPOXY PLASTIC PU PUBLISHED

EPS-14200 7/1/1982 FILLING OF HONEYCOMB SEALS WITH NICKEL-A PUBLISHED

EPS-14215 C 1/8/1974 SILVER BRAZING HIGH TEMPERATURE SILVER S PUBLISHED

EPS-14270 B 7/15/1992 GOLD-NICKEL ALLOY BRAZING-CORROSION & HE PUBLISHED

EPS-14278 A 7/15/1992 CU-MN-NI ALLOY FURNACE BRAZING CORROSION PUBLISHED

EPS-14280 A 4/15/1966 COPPER FURNACE BRAZING CORROSION AND HEA PUBLISHED

EPS-14290 2/4/1965 NICKEL ALLOY BRAZING CORROSION AND HEAT PUBLISHED

EPS-14295 A 7/15/1992 NICKEL ALLOY BRAZING CORROSION AND HEAT PUBLISHED

EPS-14296 A 7/15/1992 HYDROGEN DIFFUSION BONDING OF CORROSION PUBLISHED

EPS-14299 B 7/15/1992 NICKEL (ELECTROLESS) BRAZING CORROSION & PUBLISHED

EPS-14305 A 7/20/1993 BRAZING, NICKEL ALLOY - EMS-71005 - EXTR PUBLISHED

EPS-14310 C 7/15/1992 BRAZING, SILVER - AMS-4766 SILVER MANGAN PUBLISHED

EPS-14315 E 7/30/1998 BRAZING, SILVER-EMS56520 ALLOY /RSNI/ PUBLISHED

EPS-14320 C 7/15/1992 BRAZING, SILVER - EMS-56495 ALLOY /RT-SN PUBLISHED

EPS-14325 C 8/13/1992 SILVER BRAZING - SILVER,COPPER,TIN,NICKE PUBLISHED

EPS-14326 B 7/15/1992 REBRAZING OF PROPELLER BLADES PUBLISHED

EPS-14328 A 9/26/1973 HEAT TREATMENT PROPELLER BRAZING ASSEMBL PUBLISHED

EPS-14330 A 1/8/1974 SILVER BRAZING REPAIR PROCEDURES PUBLISHED

EPS-14345 A 10/4/1957 BRAZING, SILVER-EMS-56500 ALLOY /EASY FL PUBLISHED

EPS-14347 C 12/7/1981 CASTING OF AMS-4750 LEAD SOLDER SEALING PUBLISHED

EPS-14348 A 7/17/1995 CASTING OF SILVER ALLOY SEALING RINGS NON-CURRENT

EPS-14349 B 1/11/2019 CASTING OF BABBITT SEALING RINGS PUBLISHED

EPS-14350 A 5/11/1955 BRAZING, SILVER-EMS-56515 ALLOY /S1-1350 PUBLISHED

EPS-14351 4/6/1956 REPROCESSING, SILVER BRAZED TURBOPROP CO PUBLISHED

EPS-14355 C 4/20/1956 BRAZING, SILVER TURBOPROP STATOR VANES PUBLISHED

EPS-14356 AB 3/13/2019 BRAZING, SILVER, COMPRESSOR STATOR VANES PUBLISHED

EPS-14360 B 7/28/1959 BRAZING, SILVER-EMS-56520 ALLOY /RSNI/ C PUBLISHED

EPS-14365 C 7/15/1992 BRAZING, SILVER TITANIUM STATOR VANES AS PUBLISHED

EPS-14370 A 7/15/1992 SILVER BRAZING & PRECIPITATION HEAT TREA PUBLISHED

EPS-14375 L 5/19/2015 COPPER BRAZING & RELATED HEAT TREATMENT PUBLISHED

EPS-14377 E 8/13/2020 COPPER BRAZING - STATOR VANES PUBLISHED

88

Specification


EPS-14379 3/21/2011 MANUAL TORCH BRAZING OF WIRE MESH PATCHES PUBLISHED

EPS-14380 A 7/15/1992 CADMIUM BRAZING OF LOW ALLOY AND STAINLE PUBLISHED

EPS-14381 A 5/17/2001 BRAZING, TITANIUM AND TITANIUM ALLOY PAR PUBLISHED

EPS-14390 A 7/15/1992 FABRICATION OF CERAMIC FIXTURES FOR BRAZ PUBLISHED

EPS-14400 A 11/21/1991METAL MATRIX ABRASIVE TIP SYSTEM FOR SINGLE CRYSTAL CAST TURBINE

BLADES PUBLISHED

EPS-14410 A 5/5/1993 BONDING OF PRECONSOLIDATED METAL MATRIX PUBLISHED

EPS-14450 F 6/15/2020 HOT UPSETTING - COMPRESSOR STATOR VANES PUBLISHED

EPS-14452 6/1/1987 HOT UPSETTING COMPRESSOR STATOR VANES PUBLISHED

EPS-14500 Y 8/3/1992 WELDING AND BRAZING SYMBOLS PUBLISHED

EPS-14510 D 3/6/2018 GAS TUNGSTEN ARC WELDING OF TUBULAR ASSE PUBLISHED

EPS-14517 A 8/7/1995 WELDING, STUD, CAPACITOR, DISCHARGE PUBLISHED

EPS-14519 C 5/21/2012 PERCUSSION STUD WELDING IRON-BASE, NICKE PUBLISHED

EPS-14520 N 4/23/2013 RESISTANCE SPOT AND SEAM WELDING FERROUS PUBLISHED

EPS-14522 A 4/10/1968 RESISTANCE SPOT & SEAM WELDING-TITANIUM PUBLISHED

EPS-14523 A 8/21/2013 PROJECTION WELDING PUBLISHED

EPS-14524 8/4/1994 WELDING, TITANIUM AND TITANIUM ALLOY TUB PUBLISHED

EPS-14525 D 4/10/1968 RESISTANCE SPOT & SEAM WELDING-ALUMINUM PUBLISHED

EPS-14530 R 2/8/2003 FUSION WELDING CERTIFICATION OF WELDERS PUBLISHED

EPS-14532 E 8/11/2005 AUTOMATIC FUSION WELDING CERTIFICATION O PUBLISHED

EPS-14533 6/15/1984 CERTIFICATION OF INERTIA WELDED ASSEMBLI PUBLISHED

EPS-14533-1 6/15/1984 INERTIA WELDED GASIFIER ASSEMBLY-MODEL25 PUBLISHED

EPS-14533-2 7/13/2004INERTIA WELDING OF JSF LIFTFAN PYROWEAR 675 FIRST- AND SECOND-

STAGE GEARS PUBLISHED

EPS-14533-3 B 5/17/2007 Inertia Welding of Alloy 53 (EMS 65009) Gears PUBLISHED

EPS-14535 C 7/31/2001 WELDING OF TITANIUM ALLOYS PUBLISHED

EPS-14608 B 6/23/1965 FLASH BUTT WELDING SMALL WIRE THERMOCOUP PUBLISHED

EPS-14631 A 7/17/1995 ELECTRON BEAM WELDING MODEL 912 HIGH PRE NON-CURRENT

EPS-14632 A 7/17/1995 ELECTRON BEAM WELDING, HIGH VOLTAGE MODE NON-CURRENT

EPS-14633 3/21/1973 ELECTRON BEAM WELDING MODEL 912 HIGH PRE PUBLISHED

EPS-14634 A 7/17/1995 ELECTRON BEAM WELDING MODEL 912 HIGH PRE NON-CURRENT

EPS-14635 C 7/17/1995 ELECTRON BEAM WELDING OF TF41 SECOND STA NON-CURRENT

89

Specification


EPS-14637 8/1/1974 ELECTRON BEAM WELDING MODEL 912 HIGH PRE PUBLISHED

EPS-14639 11/27/2002 ELECTRON BEAM WELDING PUBLISHED

EPS-14641 3/18/2004 LASER WELDING PUBLISHED

EPS-14655 A 1/14/2008 ELECTRON BEAM WELDING, HA230 LAMILLOY CO PUBLISHED

EPS-14664 C 4/4/1995 GTAW APPLICATION OF COBALT BASE HARD FAC NON-CURRENT

EPS-15510 A 7/18/1951 REMOVAL OF LEADED FUEL DECOMPOSITION PRO PUBLISHED

EPS-15520 A 7/25/1951 REMOVAL OF LEADED FUEL DECOMPOSITION PRO PUBLISHED

EPS-15555 T 6/29/2011 HOT ALKALINE CLEANING TITANIUM-BASE ALLO PUBLISHED

EPS-15558 4/6/2005 ACID CLEANING OF TITANIUM ALLOYS-MINIMAL PUBLISHED

EPS-15559 F 8/13/2009 ACID CLEANING & DESCALING TITANIUM & TIT PUBLISHED

EPS-15560 E 8/3/1990 PICKLING OF TITANIUM AND TITANIUM ALLOYS PUBLISHED

EPS-15565 1/6/2004 ULTRASONIC CLEANING, HA 230 LAMILLOY COMBUSTOR PUBLISHED

EPS-15566 1/6/2004 HYDROGEN CLEANING,HA 230 LAMILLOY COMBUSTOR PUBLISHED

EPS-15570 A 3/28/1951 PICKLING OF INCONEL & AUSTENITIC STAINLE PUBLISHED

EPS-15572 11/16/1967 CHEMICAL REMOVAL OF SCALE FROM NICKEL BA PUBLISHED

EPS-15575 B 12/4/1990 CHEMICAL SURFACE TREATMENT OF PRECIPITAT PUBLISHED

EPS-15580 B 7/17/1995 REMOVAL OF THERMAL TREATMENT OXIDE AND S NON-CURRENT

EPS-15585 9/8/1958 REMOVAL OF SCALE & OXIDE FILM FROM HEAT PUBLISHED


EPS-15590 K 9/15/1984 MOLTEN SALT CLEANING PUBLISHED

EPS-15600 Y 5/12/2014 ACID PICKLING NITRIDED STEEL PARTS PUBLISHED

EPS-15700 E 9/5/2008 ELECTROPOLISHING OF STAINLESS STEEL PUBLISHED

EPS-15755 B 11/21/2005Processing and Inspection Requirements for Preparation of Individual Sheets

for PUBLISHED

EPS-15800 K 5/26/2011 PROCESSING OF NICKELBASE ALLOY TURBINE D PUBLISHED

EPS-15801 P 9/17/2013 CLEANING, PROCESSING, HANDLING, AND IDEN PUBLISHED

EPS-15802 A 7/22/2011 ETCHING OF TITANIUM COMPONENTS PUBLISHED

EPS-15803 A 8/24/2000 ETCHING, U720 TURBINE WHEELS, OVERHAUL PUBLISHED

EPS-15804 A 7/22/2011 ETCHING OF TITANIUM ALLOY COMPONENTS FOR PUBLISHED

EPS-15805 A 5/1/2012 ETCHING OF NICKEL ALLOY COMPONENTS FOR M PUBLISHED

EPS-15806 E 9/17/2013 PROCESSING OF TITANIUM ALLOY DISKS AND A PUBLISHED

EPS-15807 D 2/21/2012 PROCESSING OF CARBON AND LOW ALLOY STEEL PUBLISHED

90

Specification


EPS-15808 B 11/26/2012 ETCH/CLEANING PRIOR TO PENETRANT INSPEC PUBLISHED

EPS-16005 D 3/6/2002 TEMPORARY IDENTIFICATION OF TITANIUM ALL PUBLISHED

EPS-16010 F 1/8/1993 MARKING, CHEMICAL ETCH PLUS INK - STEEL PUBLISHED

EPS-16012 E 11/26/2013 MARKING OF METALLIC COMPONENTS PUBLISHED

EPS-16400 J 11/17/2000 IDENTIFICATION OF PARTS FINISHED,SEMIFIN PUBLISHED

EPS-16401 A 6/17/2003 ELECTRO CHEMICAL ETCH MARKING PUBLISHED

EPS-16410 J 8/13/1992 IDENTIFICATION OF MATERIAL PARTS FABRICA NON-CURRENT

EPS-16420 D 6/24/2009 LASER PART MARKING - CANCELLED SUPERSEDED BY RRP-59004 PUBLISHED

EPS-16500 1/30/1987 PHACOMP NUMBER CALCULATION PUBLISHED

EPS-16AAA A 6/2/1983 IDENTIFICATION OF CERAMIC MATERIALS PUBLISHED

EPS-19607 4/17/1989 ASSEMBLY OF O-RINGS AND LUBE SYSTEM COMP PUBLISHED

EPS-200 BJ 8/3/2020 CARBURIZING CARBONITRIDING AND RELATED H PUBLISHED

EPS-202 AU 3/29/2001 CARBURIZING AND RELATED HEAT TREATMENTS PUBLISHED

EPS-206 B 3/31/2004CARBURIZING AND RELATED HEAT TREATMENTS for EMS 65008 OR AMS

5930 COMPONENTS PUBLISHED

EPS-210 L 3/19/1997 CARBURIZING AND RELATED HEAT TREATMENTS PUBLISHED

EPS-214 H 7/1/1999 CARBURIZING AND RELATED HEAT TREATMENT E PUBLISHED

EPS-215 R 7/1/1999 CARBURIZING, CARBONITRIDING AND RELATED PUBLISHED

EPS-216 AA 11/19/2013 CARBURIZING CARBONITRIDING AMS-6270, 627 PUBLISHED

EPS-218-20 G 2/15/1985 NEW DEPARTURE HYATT BEARINGS-CARBURIZING PUBLISHED

EPS-218-21 F 3/15/1988 NEW DEPARTURE HYATT BEARINGS - CARBURIZI PUBLISHED

EPS-218-50 9/22/1965 KAYDON CARBURIZING AND RELATED HEAT TREA PUBLISHED

EPS-219 M 3/16/1976 CARBURIZING AND RELATED HEAT TREATMENTS PUBLISHED

EPS-221 B 7/17/1995 CARBURIZING & RELATED HEAT TREATMENTS TF NON-CURRENT

EPS-222 G 7/17/1995 CARBURIZING AND RELATED HEAT TREATMENT E NON-CURRENT

EPS-227 L 11/19/2013 NITRIDING AND RELATED HEAT TREATMENTS EM PUBLISHED

EPS-228 3/23/2000 CABURIZING AND RELATED HEAT TREATMENTS A PUBLISHED

EPS-229 9/10/1956 CARBON RESTORATION DECARBURIZED STEEL FO PUBLISHED

EPS-236 C 1/18/1960 CONTROL PROCEDURE FOR DETERMINATION OF E PUBLISHED

EPS-240 D 9/6/1955 HEAT TREATMENT OF STEEL PARTS - AMS 5024 PUBLISHED

EPS-241 B 4/29/1955 HEAT TREATMENT OF SAE 1141 STEEL PARTS PUBLISHED

EPS-242 F 7/17/1995 HEAT TREATMENT OF STEEL PARTS EMS 64050 NON-CURRENT

91

Specification


EPS-243 F 5/28/1975 HEAT TREATMENT OF STEEL PARTS AMS 5080 ( PUBLISHED

EPS-244 J 4/5/1983 HEAT TREATMENT OF STEEL PARTS AMS5120 (S PUBLISHED

EPS-246 E 7/17/1995 CYANIDE HARDENING OF STEEL PARTS NON-CURRENT

EPS-248-10 E 9/15/1982 NEW DEPARTURE HYATT BEARINGS - HEAT TREA PUBLISHED

EPS-248-11 C 7/29/1964 NEW DEPARTURE HEAT TREATMENT DOUBLE STAB PUBLISHED

EPS-248-40 B 7/27/1964 SKF CONVENTIONAL HEAT TREATMENT AMS 6445 PUBLISHED

EPS-248-42 C 1/9/1965 SKF HEAT TREATMENT - DOUBLE STABILIZED A PUBLISHED

EPS-248-50 9/21/1965 KAYDON HEAT TREATMENT AMS 6443 OR 6446, PUBLISHED

EPS-249 F 10/16/1975 HEAT TREATMENT OF STEEL PARTS AMS 5334, PUBLISHED

EPS-250 F 9/26/1975 HEAT TREATMENT OF STEEL PARTS AMS-6330 ( PUBLISHED

EPS-251 K 7/20/2010 HEAT TREATMENT OF STEEL PARTS, AMS 6282, PUBLISHED

EPS-252 C 1/29/1951 HEAT TREATMENT OF SPRING CLUTCH PLATES PUBLISHED

EPS-253 K 11/19/2013 HEAT TREATMENT OF STEEL PARTS, AMS 6322, PUBLISHED

EPS-255 C 5/2/1955 HEAT TREATMENT OF STEEL PARTS AMS 6342 ( PUBLISHED

EPS-256 C 1/23/1976 HEAT TREATMENT OF STEEL PARTS AMS 5132 ( PUBLISHED

EPS-257 F 1/26/1976 HEAT TREATMENT OF STEEL PARTS AMS 5121 ( PUBLISHED

EPS-258 E 5/23/1977 HEAT TREATMENT OF MARTENSITIC STAINLESS PUBLISHED

EPS-259 K 11/19/2013 HEAT TREATMENT OF STEEL PARTS AMS 6350, PUBLISHED

EPS-259-1 B 8/27/1975 MAR TEMPERING HEAT TREATMENT OF AMS 6360 PUBLISHED

EPS-260 W 11/19/2013 HEAT TREATMENT OF STEEL PARTS, AMS-6359, PUBLISHED

EPS-260-5 B 9/26/1975 HEAT TREATMENT OF STEEL PARTS,EMS-65030, PUBLISHED

EPS-263 E 11/17/1975 HEAT TREATMENT OF STEEL PARTS, AMS-6448, PUBLISHED

EPS-264-10 D 2/15/1985 NEW DEPARTURE HYATT BEARINGS - HEAT TREA PUBLISHED

EPS-264-11 D 3/15/1985 NEW DEPARTURE HYATT BEARINGS - HEAT TREA PUBLISHED

EPS-264-12 D 10/22/1981 NEW DEPARTURE HEAT TREATMENT NON STABILI PUBLISHED

EPS-264-13 F 3/15/1985 NEW DEPARTURE HYATT BEARINGS HEAT TREATM PUBLISHED

EPS-264-14 A 8/17/1981 NEW DEPARTURE HYETT BEARINGS - HEAT TREA PUBLISHED

EPS-264-15 C 3/15/1985 NEW DEPARTURE HYATT BEARINGS - HEAT TREA PUBLISHED

EPS-264-20 B 11/27/1964 HYATT HEAT TREATMENT 52100 TYPE STEEL BE PUBLISHED

EPS-264-21 C 3/15/1985 NEW DEPARTURE HYATT BEARINGS-HEAT TREATM PUBLISHED

EPS-264-30 A 3/29/1965 MRC HEAT TREATMENT STEEL BEARING RING CO PUBLISHED

EPS-264-31 A 3/29/1965 MRC HEAT TREATMENT STABILIZED STEEL BEAR PUBLISHED

92

Specification


EPS-264-32 A 3/29/1965 MRC HEAT TREATMENT STEEL BEARING BALLS - PUBLISHED

EPS-264-33 A 3/29/1965 MRC HEAT TREATMENT STEEL BEARING ROLLERS PUBLISHED




EPS-264-40 E 5/16/1984 SKF HEAT TREATMENT STEEL BEARING COMPONE PUBLISHED

EPS-264-42 D 1/12/1983 SKF HEAT TREATMENT STEEL BEARING COMPONE PUBLISHED

EPS-264-43 C 1/23/1965 SKF HEAT TREATMENT STEEL BEARING GUIDE R PUBLISHED

EPS-265 K 11/28/2001 HEAT TREATMENT OF STEEL PARTS PUBLISHED

EPS-266 M 11/15/1982 ANNEALING OF HEAT AND CORROSION RESISTAN NON-CURRENT

EPS-267 H 11/19/2013 HEAT TREATMENT OF CORROSION RESISTANT ST PUBLISHED

EPS-267-1 Y 9/16/2005 HEAT TREATMENT OF CORROSION RESISTANT ST PUBLISHED

EPS-267-3 A 10/15/1975 HEAT TREATMENT OF CORROSION RESISTANT ST PUBLISHED

EPS-269 AJ 1/14/2020 NITRIDING & RELATED HEAT TREATMENTS-AMS- PUBLISHED

EPS-270 AE 11/19/2013 NITRIDING AND RELATED HEAT TREATMENT - A PUBLISHED

EPS-271 L 7/17/1995 NITRIDING AND RELATED HEAT TREATMENTS AM NON-CURRENT

EPS-272 P 8/26/1999 NITRIDING AND RELATED HEAT TREATMENTS AM PUBLISHED

EPS-274 L 11/29/1995 NITRIDING AND RELATED HEAT TREATMENTS EM PUBLISHED

EPS-278 H 1/24/2005 HEAT TREATMENT OF HIGH SPEED STEEL PARTS PUBLISHED

EPS-284 C 4/2/2014 CARBURIZING AND RELATED HEAT TREATMENTS PUBLISHED

EPS-285 D 7/17/1995 PRECIPATION HEAT TREATMENT - ALUMINUM AL NON-CURRENT

EPS-290 C 7/17/1995 SOLUTION AND PRECIPITATION HEAT TREATMEN NON-CURRENT

EPS-292 AC 3/24/2021 NITRIDING AND RELATED HEAT TREATMENTS EM PUBLISHED

EPS-293 C 5/30/2002 NITRIDING AND RELATED HEAT TREATMENTS MO PUBLISHED

EPS-295 D 10/7/1964 SOLUTION & PRECIPITATION HEAT TREATMENT PUBLISHED

EPS-2AA A 10/21/1985 CARBURIZING AND RELATED HEAT TREATMENTS PUBLISHED

EPS-300 12/15/1982 NEW HAMPSHIRE BALL BEARINGS, INC HEAT TR PUBLISHED

EPS-301 12/15/1982 NEW HAMPSHIRE BALL BRGS INC HEAT TREATME PUBLISHED

EPS-305 4/22/1981 FAG INDUSTRIES HEAT TREATMENT STABILIZED PUBLISHED

EPS-306 4/22/1981 FAG INDUSTRIES HEAT TREATMENT AMS-6414 O PUBLISHED

EPS-316 J 7/24/2009 STRIPPING OF COPPER & BRONZE FROM PARTS PUBLISHED

EPS-322 C 5/13/1997 PROTECTION FROM NITRIDING PUBLISHED

93

Specification


EPS-333 C 8/15/1984 ANNEALING OF HEAT AND CORROSION RESISTAN PUBLISHED

EPS-336 B 4/25/1975 HYDROGEN ATMOSPHERE ANNEALING CORROSION PUBLISHED

EPS-341 A 3/31/1975 HEAT TREATMENT OF HEAT AND CORROSION RES PUBLISHED

EPS-345 T 5/13/2011 CLEANING/DEGREASING, AQUEOUS, VAPOR, OR PUBLISHED

EPS-352 C 9/18/1967 STRESS RELIEF TURBINE WHEELS & SPACERS - PUBLISHED

EPS-355 K 3/23/2000 STRESS ANNEAL HEAT TREATMENT COMPRESSOR PUBLISHED

EPS-361 9/14/1970 THERMAL SHOCK CYCLIC PROCEDURE NICKEL BA PUBLISHED

EPS-368 B 12/3/1975 HEAT TREATMENT OF TURBINE BUCKETS AND SI PUBLISHED

EPS-370 D 4/25/1975 STRESS RELIEVING OF HEAT AND CORROSION R PUBLISHED

EPS-371 C 3/19/1997 HEAT TREATMENT, BRIGHT ANNEAL OF AUSTENI PUBLISHED

EPS-372 2/25/1958 PRECIPITATION & DIFFUSION HEAT TREATMENT PUBLISHED

EPS-380 E 5/24/1976 HEAT TREATMENT OF STAINLESS STEEL PARTS PUBLISHED

EPS-385 B 6/3/1976 HEAT TREATMENT OF CORROSION RESISTANT ST PUBLISHED

EPS-390 A 2/17/1976 STRESS RELIEF HEAT TREATMENT OF WELDED A PUBLISHED

EPS-393 1/18/1961 FLAME STRESS RELIEVING HEAT TREATMENT OF PUBLISHED

EPS-400 D 5/24/1976 HEAT TREATMENT OF CORROSION RESISTANT ST PUBLISHED

EPS-401 W 8/23/2012 SOLUTION & PRECIPITATION HEAT TREATMENT PUBLISHED

EPS-402 C 3/13/1969 HOMOGENIZATION, SOLUTION & PRECIPITATION PUBLISHED

EPS-403 B 7/17/1995 SOLUTION & PRECIPITATION HEAT TREATMENT NON-CURRENT

EPS-406 11/14/1969 SOLUTION, CONDITIONING - TRANSFORMATION PUBLISHED

EPS-407 10/29/1998 SOLUTION AND PRECIPITATION HEAT TREATMEN PUBLISHED

EPS-412 C 7/17/1995 STABILIZATION TREATMENT HARDENED STEEL P NON-CURRENT

EPS-415 B 7/17/1995 SOLUTION, STABILIZATION AND PRECIPITATIO NON-CURRENT

EPS-416 C 6/10/2002 HEAT TREATMENT OF CORROSION AND HEAT RES PUBLISHED

EPS-420 M 5/25/2012 HEAT TREATMENT FOR CORROSION AND HEAT RE PUBLISHED

EPS-422 B 10/10/1995 HEAT TREATMENT OF EMS 73170 (N.108) AND NON-CURRENT

EPS-423 E 7/1/2011 SOLUTION & PRECIPITATION HEAT TREATMENT, PUBLISHED

EPS-427 A 12/18/1992 PRECIPITATION HEAT TREATMENT-NICKEL BASE PUBLISHED

EPS-428 A 12/18/1992 SOLUTION & PRECIPITATION HEAT TREATMENT PUBLISHED

EPS-433 B 5/13/2003 SOLUTION & PRECIPITATION HEAT TREATMENT PUBLISHED

EPS-433-1 A 3/31/1971 HOMOGENIZATION, SOLUTION, & PRECIPITATIO PUBLISHED

EPS-433-2 B 2/12/1996 SOLUTION AND PRECIPITATION HEAT TREATMEN PUBLISHED

94

Specification


EPS-435 E 8/31/1995 HEAT TREATMENT OF CORROSION AND HEAT RES PUBLISHED

EPS-435-1 C 8/12/2011 SOLUTION, STABILIZATION & PRECIPITATION PUBLISHED

EPS-436 A 7/31/1967 SOLUTION, STABILIZATION & PRECIPITATION PUBLISHED

EPS-437 C 1/17/1996 SOLUTION & PRECIPITATION HEAT TREATMENT PUBLISHED

EPS-438 A 7/17/1995 SOLUTION & PRECIPITATION HEAT TREATMENT NON-CURRENT

EPS-455 A 1/22/2008 HEAT TREATMENT OF EMS 72350 STEEL PARTS PUBLISHED

EPS-465 K 4/27/2020 HEAT TREATMENT SOLUTION & PRECIPITATION PUBLISHED

EPS-466 E 4/13/1981 SOLUTION & ANNEALING HEAT TREATMENT AMS PUBLISHED

EPS-482 A 12/1/1981 HEAT TREATMENT OF AMS-6414 OR AMS-6415 B PUBLISHED

EPS-483 6/30/1978 HEAT TREATMENT OF AMS-6490 OR AMS6491 BA PUBLISHED

EPS-484 A 7/17/1995 HEAT TREATMENT OF STEEL PARTS EMS-65040 NON-CURRENT

EPS-485 D 10/16/1995 HEAT TREATMENT OF STEEL PARTS - AMS 6437 PUBLISHED

EPS-486-10 B 8/13/1982 NEW DEPARTURE HYATT BEARINGS - HEAT TREA PUBLISHED

EPS-486-40 8/2/1962 SKF HEAT TREATMENT OF STEEL BEARING CAGE PUBLISHED

EPS-488 A 12/9/1981 SPLIT BALL BEARING HEAT TREATMENT OF AMS PUBLISHED

EPS-489 A 12/20/1982 NEW DEPARTURE HYATT BEARINGS - HEAT TREA PUBLISHED

EPS-492 F 5/24/1976 HEAT TREATMENT OF STEEL PARTS - AMS 6302 PUBLISHED




EPS-493-33 A 1/23/1965 MRC HEAT TREATMENT STABILIZED ANTIFRICTI PUBLISHED

EPS-493-40 D 1/12/1966SKF HEAT TREATMENT STABILIZED STEEL BEARING COMPONENTS AMS 6490

(M-50) STEEL PUBLISHED

EPS-494 B 6/23/1976 HEAT TREATMENT OF AMS 6490 STEEL (TYPE M-50) PUBLISHED

EPS-496 B 7/17/1995HEAT TREATMENT OF CORROSION RESISTANT STEEL PARTS EMS 72610

(VACUUM CONUTRODE REPUBLISHED

EPS-496-1 F 10/7/1976HEAT TREATMENT OF CORROSION RESISTANT STEEL PARTS EMS 72614 AND

EMS 70610 (AIR MPUBLISHED

EPS-497 B 5/20/1976HEAT TREATMENT OF STEEL PARTS AMS 6440, AMS 6441, AMS 6444, AMS

6447, EMS 64992,PUBLISHED

EPS-499 B 7/9/1998 HEAT TREATMENT OF STEEL PARTS EMS 777000 PUBLISHED

95

Specification


EPS-7100 G 1/10/2003COATING, OVERLAY CO-26CR-9A1-Y (LOW-PRESSURE OR ARGON-SHIELED

PLASMA SPRAY) PUBLISHED

EPS-7101 B 12/16/1999 STRAIN-ISOLATED/MODIFIED DENSITY CERAMIC PUBLISHED

EPS-C3000 C 7/20/1993 HARDENING & TEMPERING CARBON & LOW ALLOY PUBLISHED

PTS-625 C 12/29/1960 SAFETY COUPLING DECOUPLING CHECKS PUBLISHED

PTS-634 A 10/9/1957 ACCEPTANCE TEST-PROP JET ENGINES PUBLISHED

PTS-635 E 1/11/1963 EQUIPMENT REQUIREMENTS - PROP JET ENGINE PUBLISHED

PTS-636 E 7/14/1969 RED. GR. ASSY. RAM POWER LOAD & SAF. CPL PUBLISHED

PTS-650 E 1/28/1971 REDUCTION GEAR ASSY. RAM POWER LOADING & PUBLISHED

PTS-651 L 2/28/1967 ACCEPTANCE TEST - PROP JET ENGINES PUBLISHED

PTS-654 A 6/24/1960 PERFORMANCE PARTS FOR PRODUCTION TESTING PUBLISHED

PTS-655 W 9/24/1970 ACCEPTANCE TEST-PROP-JET ENGINES PUBLISHED

PTS-658 10/16/1958 SPARE GEAR BOX ACCEPTANCE TESTING ON BAC PUBLISHED


PTS-660 L 3/27/1964 EQUIPMENT REQUIREMENTS TURBO-PROP ENGINE PUBLISHED

PTS-661 E 12/29/1964 REDUCTION GEAR ASSEMBLY RAM POWER LOADIN PUBLISHED

PTS-662 J 12/12/1994 CHECK RUN SCHEDULES PUBLISHED

PTS-664 B 2/3/1961 PRODUCTION QUALITY CONTROL TEST PUBLISHED

PTS-665 B 6/11/1963 CHECK RUNS PUBLISHED

PTS-667 L 10/9/1962HYDROSTATIC PROOF TESTING THIOKOL CHEMICAL CORPORATION 65.5"

ROCKET MOTOR CASES PUBLISHED

PTS-677 D 12/29/1964 REDUCTION GEAR ASSEMBLY RAM POWER LOADIN PUBLISHED

PTS-681 F 9/21/1993 TORQUEMETER SHAFT CALIBRATION PUBLISHED

PTS-682 T 5/12/1966 ACCEPTANCE TEST-TURBO PROP ENGINES PUBLISHED

PTS-683 Q 12/29/1964 ACCEPTANCE TEST - TURBO PROP ENGINES PUBLISHED

PTS-685 B 12/29/1964 DYNAMOMETER SPECIAL TEST - TURBO PROP PO PUBLISHED

PTS-686 F 5/26/1971 EQUIPMENT REQUIREMENTS-TURBO-SHAFT TEST PUBLISHED

PTS-689 D 10/8/1964 ACCEPTANCE TESTING PUBLISHED

PTS-702 M 9/23/1993 ACCEPTANCE TESTING OF PRODUCTION TURBO P PUBLISHED

PTS-703 E 6/1/1981 EQUIPMENT REQUIREMENTS-TURBO PROP ENGINE PUBLISHED

PTS-708 E 7/5/1983 REDUCTION GEAR ASSEMBLY RAM POWER LOADIN PUBLISHED

PTS-709 B 8/27/1974 SPARE GEARBOX ACCEPTANCE TESTING ON BACK PUBLISHED

96

Specification


PTS-713 J 6/10/1992 ACCEPTANCE TESTING OF PRODUCTION TURBOPR PUBLISHED

PTS-714 E 7/7/1970 INITIAL ENGINE ACCEPTANCE TESTING PUBLISHED

PTS-715 D 10/13/1966 FINAL ACCEPTANCE TEST FOR GAS TURBINE DR PUBLISHED

PTS-716 B 2/22/1967 ACCEPTANCE TEST-PROP JET ENGINE PUBLISHED

PTS-718 C 3/21/1969 EQUIPMENT REQUIREMENTS-PROP JET ENGINE T PUBLISHED

PTS-719 A 6/1/1966 CHECK RUN SCHEDULES PUBLISHED

PTS-720 A 8/22/1969 REDUCTION GEAR ASSY RAM POWER LOADING & PUBLISHED

PTS-721 D 8/22/1969 REDUCTION GEAR ASSY RAM POWER LOADING & PUBLISHED

PTS-722 B 9/25/1968 SPARE GEARBOX ACCEPTANCE TESTING ON BACK PUBLISHED

PTS-723 7/7/1965 SPARE GEARBOX ACCEPTANCE TESTING ON BACK PUBLISHED

PTS-724 E 7/7/1970 INITIAL ACCEPTANCE TESTING PUBLISHED

PTS-726 D 5/10/1971 INITIAL ACCEPTANCE TESTING /K13/ PUBLISHED

PTS-727 G 5/11/1971 ACCEPTANCE TESTING PUBLISHED

PTS-730 M 3/18/1971 ACCEPTANCE TESTING OF COMMERCIAL TURBOSH PUBLISHED

PTS-731 J 9/24/1970 EQUIPMENT REQUIREMENTS-TURBO SHAFT ENGIN PUBLISHED

PTS-734 C 8/18/1969 PENALTY TESTS AND CHECK RUN SCHEDULES TU PUBLISHED

PTS-735 E 4/15/1967 GUN LAUNCHER-EQUIPMENT & ACCEPTANCE TEST PUBLISHED

PTS-736 C 3/6/1969 ACCEPTANCE TEST-PROP JET ENGINE 501-D36 PUBLISHED

PTS-737 A 8/22/1969 REDUCTION GEAR ASSY RAM POWER LOADING & PUBLISHED


PTS-739 D 9/8/1969 PENALTY TESTS & CHECK RUN SCHEDULES-TURB PUBLISHED

PTS-740 D 1/13/1970 FINAL ACCEPTANCE TEST FOR GAS TURBINE DR PUBLISHED

PTS-741 I 11/30/1981 ACCEPTANCE TESTING PUBLISHED

PTS-742 A 5/4/1971 EQUIPMENT REQUIREMENTS FOR ACCEPTANCE TE PUBLISHED

PTS-744 2/1/1968 FINAL ACCEPTANCE TEST FOR GAS TURBINE GE PUBLISHED

PTS-745 7/31/1968 EQUIPMENT REQUIREMENTS-COMMERCIAL TURBO PUBLISHED

PTS-746 D 6/16/1987 ACCEPTANCE TEST OF PRODUCTION COMMERCIAL PUBLISHED

PTS-747 4/30/1969 SPARE GEARBOX ACCEPTANCE TESTING ON BACK PUBLISHED

PTS-748 A 8/22/1969 REDUCTION GEAR ASSY RAM POWER LOADING AN PUBLISHED

PTS-749 D 6/26/1987 ACCEPTANCE TEST OF PRODUCTION COMMERCIAL PUBLISHED

PTS-750 B 12/7/1983 EQUIPMENT REQUIREMENTS-COMMERCIAL TURBOP PUBLISHED

PTS-751 8/15/1968 FINAL ACCEPTANCE TEST FOR GAS TURBINE DR PUBLISHED

97

Specification


PTS-752 F 5/11/1971 ACCEPTANCE TESTING T63-A-700 PUBLISHED

PTS-753 C 5/26/1971 EQUIPMENT REQUIREMENTS-TURBO SHAFT ENGIN PUBLISHED

PTS-754 A 9/26/1969 PENALTY TEST & CHECK RUN SCHEDULES-TURBO PUBLISHED

PTS-755 B 5/26/1971 INITIAL ACCEPTANCE TEST OF COMMERCIAL TU PUBLISHED



PTS-758 D 4/9/1974 ACCEPTANCE TESTING OF COMMERCIAL TURBOPR PUBLISHED

PTS-759 3/6/1969 EQUIPMENT REQUIREMENTS-TURBO PROP ENGINE PUBLISHED


PTS-761 3/10/1969 ACCEPTANCE TESTING OF INDUSTRIAL TURBOSH PUBLISHED

PTS-762 A 6/15/1970 FINAL ACCEPTANCE TEST FOR GAS TURBINE DR PUBLISHED

PTS-763 I 1/7/1982 ACCEPTANCE TESTING PUBLISHED

PTS-764 B 5/26/1971 EQUIPMENT REQUIREMENTS FOR ACCEPTANCE TE PUBLISHED

PTS-765 4/25/1969 EQUIP REQUIREMENT FOR ACCEPTANCE TESTING PUBLISHED

PTS-766 5/5/1969 ACCEPTANCE TESTING OF COMMERCIAL TURBOPR PUBLISHED

PTS-768 A 10/13/1988 EQUIPMENT REQUIREMENTS-TURBO SHAFT ENGIN PUBLISHED

PTS-769 D 5/10/1979 ACCEPTANCE TESTING OF COMMERCIAL TURBOSH PUBLISHED

PTS-770 4/28/1971 EQUIPMENT REQUIREMENTS FOR ACCEPTANCE TE PUBLISHED

PTS-771 B 11/8/1972 ACCEPTANCE TEST SCHEDULE (501-K16A) PUBLISHED

PTS-772 11/25/1970 EQUIP REQ-TP ENG TEST STANDS PUBLISHED

PTS-773 C 7/5/1979 ACCEPTANCE TEST OF COMMERCIAL TP ENGINES PUBLISHED

PTS-774 B 3/23/1973 DATA CORRECTION FACTORS & CONVERSION TAB PUBLISHED

PTS-775 D 11/28/1973 ACCEPTANCE TESTING OF GAS TURBINE ENGINE PUBLISHED

PTS-777 A 11/15/1972 ACCEPTANCE TESTING OF GAS TURBINE ENGINE PUBLISHED

PTS-778 G 10/6/1993 ACCEPTANCE TEST OF PRODUCTION TURBOPROP PUBLISHED

PTS-779 B 6/1/1981 EQUIP. REQ.-TURBO PROP ENG. TEST STAND PUBLISHED

PTS-780 11/19/1973 CHECK RUN SCHEDULES PUBLISHED

PTS-781 E 4/8/1983 ACCEPTANCE TESTS FOR 501 COMMERCIAL TURB PUBLISHED

PTS-784 11/2/1972 ACCEPTANCE TEST SCHEDULE PUBLISHED

PTS-785 11/8/1972 ACCEPTANCE TESTS FOR 501K21 COMMERCIAL T PUBLISHED

PTS-786 A 4/5/1983 ENGINE TUNE-UP PROCEDURE PUBLISHED

PTS-787 A 11/13/1973 ACCEPTANCE TEST SCHEDULE FOR GAS PRODUCE PUBLISHED

98

Specification


PTS-788 K 7/10/2009 ACCEPTANCE TESTING OF COMMERCIAL TURBO S PUBLISHED

PTS-789 9/25/1973 INITIAL ACCEPTANCE TESTING OF 501 INDUST PUBLISHED

PTS-790 B 10/31/1979 ACCEPTANCE TESTING OF COMMERCIAL TURBOPR PUBLISHED

PTS-791 C 1/26/1984 ACCEPTANCE TEST OF PRODUCTION TURBOPROP PUBLISHED

PTS-792 A 12/22/1977 ACCEPTANCE TESTING OF COMMERCIAL TURBOSH PUBLISHED

PTS-795 F 10/28/1993 ACCEPTANCE TESTING OF MILITARY TURBOSHAF PUBLISHED

PTS-797 3/16/1976 ACCEPTANCE TESTING 501 FREE TURBINE ENGI PUBLISHED

PTS-799 A 3/4/1982 ACCEPTANCE TESTING 501 FREE TURBINE ENGI PUBLISHED

PTS-804 L 3/6/2014 ACCEPTANCE TESTING OF COMMERCIAL TURBOSH PUBLISHED

PTS-805 B 1/26/1984 ACCEPTANCE TESTING OF COMMERCIAL SHAFT E PUBLISHED

PTS-806 2/23/1977 ACCEPTANCE TEST SCHEDULE WITH ELECTRONIC PUBLISHED


PTS-808 7/19/1977 ACCEPTANCE TESTING OF COMMERCIAL TURBOSH PUBLISHED


PTS-810 A 3/4/1982 ACCEPTANCE TEST SCHEDULE WITH ELECTRONIC PUBLISHED

PTS-811 A 1/26/1984 ENGINE ACCEPTANCE TEST WITH ELECTRONIC C PUBLISHED

PTS-812 3/20/1986 EQUIPMENT REQUIREMENTS-TURBOSHAFT ENGINE PUBLISHED

PTS-813 E 6/22/1990 ACCEPTANCE TESTING OF MODEL 570-KA COMME PUBLISHED

PTS-815 2/10/1981 ACCEPTANCE TESTING OF COMMERCIAL TURBO S PUBLISHED




PTS-820 F 10/17/1985 ACCEPTANCE TESTING IGT 404-4 PUBLISHED


PTS-822 A 1/6/1982 ACCEPTANCE TESTING OF MODEL D424A GENERA PUBLISHED

PTS-823 7/24/1981 ACCEPTANCE TESTING OF 501 GAS GENERATOR PUBLISHED



PTS-826 B 3/19/1982 INITIAL ACCEPTANCE TEST FOR TURBOPROP GE PUBLISHED


PTS-828 C 7/21/1995 ACCEPTANCE TESTING OF COMMERCIAL TURBOSH PUBLISHED


99

Specification





PTS-834 12/6/1984 ENGINE ACCEPTANCE TEST WITH ELECTRONIC C PUBLISHED


PTS-837 D 9/23/1993 ACCEPTANCE TEST OF COMMERCIAL PRODUCTION PUBLISHED

PTS-838 6/18/1992 ACCEPTANCE TESTING OF PRODUCTION TURBOPR PUBLISHED

PTS-840 5/29/1985 ACCEPTANCE TESTING OF PRODUCTION COMMERC PUBLISHED

PTS-842 10/10/1984 ACCEPTANCE TESTING OF COMMERCIAL TURBO P PUBLISHED

PTS-843 A 10/13/1988 PENELTY TEST AND CHECK RUN SCHEDULE-COMM PUBLISHED

PTS-844 E 6/19/2009 ACCEPTANCE TESTING OF COMMERCIAL TURBOSH PUBLISHED


PTS-850 D 10/1/2009 ACCEPTANCE TESTING OF COMMERCIAL TURBO S PUBLISHED

PTS-851 A 6/15/1990 ACCEPTANCE TESTING OF COMMERCIAL FREE TU PUBLISHED

PTS-854 C 1/3/2020 ACCEPTANCE TEST FOR 501-K34 GAS TURBINE PUBLISHED



PTS-858 A 10/28/1996 CHECK RUN SCHEDULES FOR T56-A-427 ENGINE PUBLISHED


PTS-861 D 1/18/1989 GENERATOR SET ACCEPTANCE TESTING PUBLISHED

PTS-862 D 6/15/2001 ACCEPTANCE TESTING OF MILITARY TURBOPROP PUBLISHED

PTS-863 8/19/1987 EQUIP.REQUIR.FOR ACCEPT.TEST.T56-A-427 E PUBLISHED

PTS-866 12/14/1989 ACCEPTANCE TESTING OF MILITRARY TURBOSHA PUBLISHED

PTS-868 A 5/4/2010 ACCEPTANCE TESTING OF COMMERCIAL TURBOPR PUBLISHED

PTS-869 B 8/13/1991 ACCEPTANCE TESTING OF COMMERCIAL TURBOSH PUBLISHED

PTS-870 2/1/1994 ENGINE ACCEPTANCE TEST WITH DIGITAL (HAW PUBLISHED

PTS-871 10/6/1993 ACCEPTANCE TEST SCHEDULE WITH WOODWARD C PUBLISHED

PTS-872 1/11/1993 ENGINE ACCEPTANCE TEST WITH DIGITAL (HAW PUBLISHED



PTS-875 12/14/1989 VERTICAL CHECK RUN PUBLISHED

PTS-877 2/21/1997 ENGINE ACCEPTANCE TEST ON DYNE TEST STAN PUBLISHED

100

Specification


PTS-878 B 6/21/2001 ACCEPTANCE TESTING OF TURBO PROP ENGINES PUBLISHED

PTS-880 D 12/6/2010 PENALTY AND CHECK RUN SCHEDULES PUBLISHED



PTS-886 10/10/1996 ACCEPTANCE TESTING OF COMMERCIAL TURBOFA PUBLISHED

PTS-887 B 11/23/2011 PENALTY AND CHECK RUN SCHEDULES PUBLISHED

PTS-888 B 10/22/2001 ACCEPTANCE TESTING OF COMMERICAL TURBOFA PUBLISHED


PTS-891 A 6/23/1997 GENERATOR SET ACCEPTANCE TESTING PUBLISHED

PTS-892 G 12/2/2019 ACCEPTANCE TESTING OF COMMERCIAL TURBOPR PUBLISHED

PTS-895 B 1/23/2003 ENGINE ACCEPTANCE TEST ON DYNE TEST STAN PUBLISHED

PTS-896 B 4/27/2004 ENGINE ACCEPTANCE TEST ON DYNE TEST STAN PUBLISHED

PTS-897 E 1/6/2009 ACCEPTANCE TESTING OF COMMERCIAL TURBOSH PUBLISHED




PTS-901 B 5/30/2012 PENALTY TESTS AND CHECK RUN SCHEDULE PUBLISHED

PTS-902 J 3/31/2017 ACCEPTANCE TESTING OF COMMERCIAL TURBO PUBLISHED


PTS-905 A 10/22/2002 ACCEPTANCE TEST SCHEDULE WITH DIGICON CO PUBLISHED

PTS-906 A 2/15/2002 ACCEPTANCE TESTING OF INDUST 501KC7 ENGI PUBLISHED

PTS-907 D 2/11/2011 ACCEPTANCE TESTING OF IND 501KB7 ENGINES PUBLISHED

PTS-909 C 1/3/2002 GENERATOR SET ACCEPTANCE TESTING PUBLISHED

PTS-910 A 6/15/2007 ACCEPTANCE TESTING OF INDUSTRIAL TURBOSH PUBLISHED

PTS-911 B 9/30/2011 ACCEPT TESTING OF COMMERICAL TURBOFAN EN PUBLISHED

PTS-916 E 5/10/2019 ACCEPTANCE TESTING OF COMMERCIAL TURBOPR PUBLISHED


PTS-919 B 6/1/2009 ACCEPTANCE TESTING OF COMMERCIAL TURBOSH PUBLISHED

PTS-920 E 6/27/2013 PRODUCTION ACCEPTANCE TEST RR300 PUBLISHED

PTS-921 C 5/22/2018 ACCEPTANCE TESTING OF T56-A-427A MILITARY TUBOPROP ENGINES PUBLISHED

PTS-923 E 7/9/2014ACCEPTANCE TESTING OF COMMERCIAL TURBOSHAFT ENGINES ON TEST

CELLS 128 AND 130 COPUBLISHED

101

Specification


PTS-924 D 10/4/2016 ACCEPT TESTING OF COMMERCIAL TURBOSHAFT PUBLISHED

PTS-926 9/26/2012 Acceptance Testing of Commercial Turbosh PUBLISHED

PTS-928 D 12/18/2018ACCEPTANCE TESTING OF COMMERCIAL TURBOPROP ENGINES ON TEST

CELLS 128 & 130 PUBLISHED

PTS-929 D 2/12/2021 Acceptance Testing of JSF LiftFan System PUBLISHED

PTS-930 A 7/6/2010 ACCEPTANCE TESTING OF COMMERCIAL TURBOFAN ENGINES PUBLISHED

PTS-931 A 9/13/2012 Acceptance Testing of Commercial Turbofa PUBLISHED

PTS-932 7/5/2012 C20R/2 for test stands 128 and 130 PUBLISHED

PTS-934 7/11/2013ACCEPTANCE TESTING OF COMMERCIAL TURBOSHAFT ENGINES ON TEST


PTS-935 B 9/4/2019 Control Limits PUBLISHED




STAND 142 PUBLISHED


CELLS 128 AND 130 PUBLISHED

PTS-946 1/8/2020 ACCEPTANCE TESTING OF COMMERCIAL TURBOFAN ENGINES PUBLISHED

PTS-957 11/19/2019 Penalty and Check Run Schedules PUBLISHED

QCTP-RRAML0017 5/8/2001 TESTING OF COMPRESSOR CONE SHAFT PUBLISHED

QCTP-RRAML0019 7/18/2001 NDT OF THE EMS73105 (U720) 2ND STAGE TURBINE WHEEL PUBLISHED

QCTP-RRAML0023 11/19/2002 TESTING OF SECOND STAGE LOW PRESSURE TURBINE WHEEL PUBLISHED

QCTP-RRCDV0001 2/3/2014 SPHERICAL BOTTOM HOLE INSPECTION PUBLISHED

QCTP-RRCML0001 B 3/12/2014 CRITICAL PART - SUBJECT TO EDS 1306 CONT PUBLISHED

QCTP-RRCML0002 B 3/12/2014 SECOND STAGE COMPRESSOR WHEEL PUBLISHED

QCTP-RRCML0003 B 3/12/2014 THIRD STAGE COMPRESSOR WHEEL PUBLISHED

QCTP-RRCML0004 B 3/12/2014 FOURTH STAGE COMPRESSOR WHEEL PUBLISHED

QCTP-RRCML0005 B 3/12/2014 FIFTH STAGE COMPRESSOR WHEEL PUBLISHED

QCTP-RRCML0006 B 3/12/2014 SIXTH STAGE COMPRESSOR WHEEL PUBLISHED

QCTP-RRCML0008 B 3/12/2014 EIGHTH STAGE COMPRESSOR WHEEL PUBLISHED

QCTP-RRCML0009 B 3/12/2014 NINETH STAGE COMPRESSOR WHEEL PUBLISHED

QCTP-RRCML0010 B 3/12/2014 TENTH STAGE COMPRESSOR WHEEL PUBLISHED

102

Specification


QCTP-RRCML0011 B 3/12/2014 ELEVENTH STAGE COMPRESSOR WHEEL PUBLISHED

QCTP-RRCML0012 B 3/12/2014 TWELFTH STAGE COMPRESSOR WHEEL PUBLISHED

QCTP-RRCML0016 D 12/14/2014 FAN WHEEL FROM THE FILLET CONDITION PUBLISHED

QCTP-RRCML0018 C 8/13/2013 CRITICAL PART-SUBJECT TO EDS1306 CONTROL PUBLISHED

QCTP-RRCML0022 1/27/2005 NON DESTRUCTIVE TESTING OF THE EMS73105 FIRST STAGE TURBINE WHEEL PUBLISHED

QCTP-RRCML0024 9/16/2019 CRITICAL PART-SUBJECT TO RRES 90000 CONTROL PUBLISHED

QCTP-RRCML0025 9/16/2019 CRITICAL PART-SUBJECT TO RRES 90000 CONTROL PUBLISHED

QCTP-RRCML0026 9/16/2019 CRITICAL PART - SUBJECT to RRES 90000 CONTROL PUBLISHED










QCTP-RRCML0036 B 12/11/2018 CRITICAL PART-SUBJECT TO RRES90000 CONTR PUBLISHED

QCTP-RRCML0037 E 8/27/2020 NON-DESTRUCTIVE OF THE CLUTCH OUTPUT SHA PUBLISHED

QCTP-RRCML0044 A 1/25/2018 DIFFUSER FLANGE(S) PUBLISHED

QCTP-RRCML0045 A 5/22/2006 NON-DESTRUCTIVE TESTING OF THE CLUTCH OU PUBLISHED

QCTP-RRCML0046 4/21/2006 NDT SPECIFICATIONS ON STAGE 2 SHAFT-JS20 PUBLISHED

QCTP-RRCML0051 11/29/2010 CRITICAL PART-SUBJECT TO RRES90000 CONTR PUBLISHED


QCTP-RRCML0057 A 9/25/2015 CRITICAL PART-SUBJECT TO RRES90000 CONTR PUBLISHED



QCTP-RRCML0061 C 3/3/2020 CRITICAL PART-SUBJECT TO RRES90000 CONTR PUBLISHED

QCTP-RRCML0062 C 3/3/2020 CRITICAL PART-SUBJECT TO RRES90000 CONTR PUBLISHED

QCTP-RRCML0070 B 6/10/2020 NON DESTRUCTIVE TESTING OF THE AMS4108 PUBLISHED

QCTP-RRCML0071 C 6/10/2020 NON DESTRUCTIVE TESTING OF THE AMS4333 PUBLISHED

103

Specification






QCTP-RRCML0079 A 3/13/2012NON-DESTRUCTIVE TESTING OF THE AMS4991, (TITANIUM 6AI-4V) GEARBOX

CENTER SUPPORTPUBLISHED


QCTP-RRCML0087 B 5/18/2010 NON-DESTRUCTIVE TESTING OF SECOND STAGE PUBLISHED

QCTP-RRCML0088 B 5/18/2010 CRITICAL PART-SUBJECT TO EDS-1306 CONTRO PUBLISHED

QCTP-RRCML0089 A 10/11/2005 CRITICAL PART-SUBJECT TO EDS1306 CONTROL PUBLISHED

QCTP-RRCML0090 B 3/12/2014 SEVENTH STAGE COMPRESSOR WHEEL PUBLISHED

QCTP-RRCML0091 B 3/12/2014 THIRTEENTH STAGE COMPRESSOR WHEEL PUBLISHED

QCTP-RRCML0092 C 3/12/2014 FOURTEENTH STAGE COMPRESSOR WHEEL PUBLISHED

QCTP-RRCML0093 B 3/12/2014 COMPRESSOR CONE SHAFT PUBLISHED

QCTP-RRCML0094 1/14/2011NON-DESTRUCTIVE TESTING OF THE AMS 4928, (Ti 6/4) PINION GEAR

SUPPORT PUBLISHED

QCTP-RRCML0095 D 5/18/2010 NON-DESTRUCTIVE TESTING OF SECOND STAGE PUBLISHED

QCTP-RRCML0097 5/26/2006 CRITICAL PART - SUBJECT TO EDS-1306 CONT PUBLISHED



QCTP-RRCML0100 A 3/6/2014 CRITICAL PART - SUBJECT TO EDS-1306 CONT PUBLISHED



QCTP-RRCML0103 5/10/2007 CRITICAL PART - SUB TO EDS 1306 CONTROL PUBLISHED

QCTP-RRCML0105 A 2/8/2007 FORWARD COVER PLATE PUBLISHED

QCTP-RRCML0106 A 2/8/2007 LPT3 AFT COVER PLATE PUBLISHED

QCTP-RRCML0107 A 2/8/2007 IMPELLER LOW PRESSURE THIRD STAGE PUBLISHED

QCTP-RRCML0108 B 2/8/2007 LOW PRESSURE THIRD STG TURBINE WHEEL PUBLISHED

QCTP-RRCML0110 10/12/2006 NON-DESTRUCTIVE TESTING OF THE EMS-65009 PUBLISHED

QCTP-RRCML0111 10/12/2006 NON-DESTRUCTIVE TESTING OF EMS-65009 STA PUBLISHED

QCTP-RRCML0112 10/12/2006 NON-DESTRUCTIVE TESTING OF THE EMS-65009 PUBLISHED

QCTP-RRCML0113 12/14/2006 CRITICAL PARTS - SUBJECT TO EDS1306 CONT PUBLISHED

104

Specification





QCTP-RRCML0117 A 6/13/2007 NON-DESTRUCTIVE TEST-EMS-59503 PUBLISHED

QCTP-RRCML0118 A 3/1/2007 NON-DESTRUCTIVE TESTING OF THE MSRR 8684 PUBLISHED

QCTP-RRCML0120 3/29/2007 STG 1 GEAR & COLLOR BOTH BILLET & RECTIL PUBLISHED

QCTP-RRCML0121 3/29/2007 STG 2GEAR & COLLOR BOTH BILLET & RECTIL PUBLISHED

QCTP-RRCML0122 3/30/2007 PINION GEAR IN BOTH BILLET & RECTILINEAR PUBLISHED

QCTP-RRCML0123 A 3/3/2008 NON-DESTRUCTIVE TESTING OF THE EMS 73102, (IN 718) FAN WHEEL PUBLISHED



QCTP-RRCML0126 6/4/2007 EDDY CURRENT TEST OF EMS73105 2ND TURBIN PUBLISHED

QCTP-RRCML0127 6/8/2007 EDDY CURRENT TEST EMS73105 3RD STAGE TUR PUBLISHED

QCTP-RRCML0128 5/11/2007 STG 4 TURB WHEEL POST PEENED CONDITION PUBLISHED

QCTP-RRCML0129 B 10/18/2007 CRITICAL PART, SUBJECT TO EDS-1306 CONTROL PUBLISHED

QCTP-RRCML0130 A 4/19/2010 QUALITY CONTROL TEST PROCEEDURE PUBLISHED

QCTP-RRCML0131 B 4/6/2010 CRITICAL PART-SUBJECT TO EDS 1306 CONTRO PUBLISHED

QCTP-RRCML0140 3/13/2008 CRITICAL PART-SUBJECT TO EDS-1306 CONTRO PUBLISHED



QCTP-RRCML0143 3/13/2008 CRITICAL PART-SUBJECT TO EDS-1306 CONTROL PUBLISHED




QCTP-RRCML0152 A 3/31/2010 CRITICAL PART-SUBJECT TO EDS 1306 CONTRO PUBLISHED

QCTP-RRCML0153 B 7/11/2012 CP- TO EDS 1306 CONTROL T56, 501-D,501K PUBLISHED

QCTP-RRCML0154 C 6/15/2017 CP- TO EDS 1306 CONTROL T56, 501-D,501K PUBLISHED

QCTP-RRCML0155 B 7/11/2012 EDS 1306 CONTROL T56-T7B, 501-D22, D36 PUBLISHED

QCTP-RRCML0157 10/16/2010 CRITICAL PART SUB TO RRESS-90000 CONTROL PUBLISHED



105

Specification


QCTP-RRCML0161 6/18/2010CRITICAL PART- SUB TO EDS 1306 CONTROL COVERS THE FULL NON-

DESTRUCTIVE TESTING OPUBLISHED

QCTP-RRCML0162 B 2/6/2013 NON DESTRUCTIVE TESTING OF LHM2438 1ST STAGE TURBINE DISC PUBLISHED

QCTP-RRCML0163 B 2/6/2013 NON DESTRUCTIVE TESTING OF LHM2438 2ND STAGE TURBINE DISC PUBLISHED

QCTP-RRCML0164 A 1/24/2012NON-DESTRUCTIVE TESTING OF THE AMS 5704. (WASPALOY) POWER

TURBINE INTERSTAGE SEAPUBLISHED

QCTP-RRCML0166 2/1/2010 CRITICAL PART-SUJECT TO EDS-1306 CONTROL PUBLISHED




QCTP-RRCML0171 6/18/2010CRITICAL PART-SUB TO EDS-1306 CONTROL COVERS THE FULL NON-

DESTRUCTIVE TESTING OFPUBLISHED

QCTP-RRCML0172 B 5/9/2014 NON DESTRUCTIVE TESTING OF THE EMS73111, PUBLISHED

QCTP-RRCML0173 B 5/9/2014 TESTING EMS-73111 LP INTER TURB SPACER PUBLISHED

QCTP-RRCML0174 B 5/9/2014 TESTING EMS-73111 POWER TURBINE SPACER PUBLISHED

QCTP-RRCML0178 4/30/2010 CRITICAL PART-SUBJECT TO EDS1306 CONTRO PUBLISHED

QCTP-RRCML0179 A 7/3/2019 CRITICAL PART - SUBJECT to EDS 1306 CONTROL PUBLISHED

QCTP-RRCML0180 A 7/3/2019 CRITICAL PART - SUBJECT to EDS 1306 CONTROL PUBLISHED

QCTP-RRCML0181 4/30/2010 NON-DESTRUCTIVE TESTING OF EMS73111 (WAS PUBLISHED

QCTP-RRCML0185 3/28/2012 CRITICAL PART SUBJECT TO RRES90000 CONTR PUBLISHED

QCTP-RRCML0201 A 5/1/2012 NON DESTRUCTIVE TESTING OF THE MSRR7270, (RR 1000) IMPELLER PUBLISHED

QCTP-RRCML0207 1/16/2013 CRITICAL PART-SUBJECT TO EDS 1306 COINTROL PUBLISHED

QCTP-RRCML0208 7/12/2013Non-Destructive testing of the EMS 73102 (Inconel 718), Third Stage Turbine

WheePUBLISHED

QCTP-RRCML0209 7/12/2013Non-Destructive testing of the EMS 73102 (Inconel 718), Fourth Stage

Turbine WhePUBLISHED

QCTP-RRCML0213 1/13/2015 NON-DISTRUCTIVE TESTING FOF THE AMS5613 FORGED MODEL 250 PUBLISHED

QCTP-RRCML0215 8/11/2015 CRITICAL PART SUBJECT TO RRES 90000 CONTONTROL PUBLISHED

QCTP-RRCML0229 A 10/9/2017 CRITICAL PART SUBJECT TO RRES 90000 CONTROL PUBLISHED

QCTP-RRCML0232 A 2/6/2019 QUALITY CONTROL TEST PROCEEDURE PUBLISHED

QCTP-RRCML0234 3/25/2020Generic ultrasonic testing technique to detect sub-surface cracking on flat

gearPUBLISHED

106

Specification


QCTP-RRCML0235 1/15/2021Covers the full Non-Destructive testing of the U720 material HPT 1 Wheel

from thPUBLISHED

QCTP-RRCML0236 1/15/2021Covers the full Non-Destructive testing of the U720 material HPT 2 Wheel

from thPUBLISHED

QCTP-RRCML0238 1/15/2021Covers the full Non-Destructive testing of the U720 material Impeller from

the bPUBLISHED

QCTP-RRCML0239 1/15/2021Covers the full Non-Destructive testing of the U720 material PT 1 Wheel from

thePUBLISHED


thePUBLISHED


thePUBLISHED

RQSC 12X-5000 2 8/11/2009 COMPONENT-SPECIFIC RATIONALIZED QUALITY STANDARD PUBLISHED

RQSC 13Q-5003 10/28/2010 Turbine Discs and Rotatives in Waspaloy PUBLISHED

RQSC 1T-5004 3 3/28/2012 COMPRESSOR DISCS IN TITANIUM 6242 MATERI PUBLISHED

RQSC 1T-5006 2 4/17/2012 VANE 6 RESTRICTED PUBLISHED

RQSC 1T-5011 1/11/2021 F-35B LiftSystem 3-Bearing Swivel Module (3BSM) Cases PUBLISHED

RQSC 22T-5000 3 3/28/2012 COMPRESSOR DISCS IN TITANIUM 6242 MATERI PUBLISHED

RQSC 26Q-5000 4/9/2008 TURBINE DISCS IN UDIMET 720 MATERIAL PUBLISHED

RQSC 2L-5000 2/8/2008 SPINNERS & ASSOCIATED ROTATIVES IN 7049-T73 ALUMINUM PUBLISHED

RQSC 3Q-5000 2 5/13/2009 LP TURBINE BLADES IN SINGLE CRYSTAL NICKEL MATERIAL PUBLISHED

RQSC 3Q-5001 2 5/20/2009 HP TURBINE VANE ENDWALLS IN SINGLE CRYSTAL NICKEL MATERIAL PUBLISHED

RQSC 3Q-5002 3 11/4/2010 HP TURBINE VANE SPAR IN SINGLE CRYSTAL NICKEL MATERIAL PUBLISHED

RQSC 3Q-5003 2 10/8/2009 HP TURBINE VANE COVERSHEETS IN SINGLE CRTSTAL NICKEL MATERIAL PUBLISHED

RQSC 3Q-5004 1 6/9/2009 LPT2 VANE IN SINGLE CRYSTAL NICKEL MATER PUBLISHED

RQSC 3Q-5005 1 6/9/2009 LPT2 VANE IN SINGLE CRYSTAL NICKEL MATER PUBLISHED

RQSC 3Q-5006 11/6/2009POST BONDING INSPECTION OF F136 HIGH PRESSURE TURBINE NOZZLE

AIRFOILS PUBLISHED

RQSC 3Q-5007 1/29/2010POST BiCASTING INSPECTION OF F136 HIGH PRESSURE TURBINE VANE

DOUBLETS PUBLISHED

RQSC 3Q-5010 6/20/2014 HP TURBINE ENDWALL COVERSHEETS IN SINGLE CRYSTAL NICKEL MATERIAL PUBLISHED

107

Specification


RQSC 3Q-5011 5/21/2014 HP TURBINE AEROFOIL COVERSHEETS IN SINGLE CRYSTAL NICKEL MATERIAL PUBLISHED

RQSC 3Q-5012 5/21/2014HP TURBINE VANE INNER AND OUTER ENDWALL SPAR IN SINGLE CRYSTAL

NICKEL MATERIAL PUBLISHED

RQSC 3Q-5013 5/21/2014 HP TURBINE AEROFOIL SPAR IN SINGLE CRYSTAL NICKEL MATERIAL PUBLISHED

RQSC 4E-5001 10/21/2012 Air Bleed Screen#Braze JOINT VISUAL INSP PUBLISHED

RQSC 4L-5002 2 3/18/2014VANE BOX FRAME COMPONENT AND ASSEMBLY DIMENSIONAL INSPECTIONS

PROCEDURE PUBLISHED

RQSC 4L-5003 7/24/2019 TRANSITION DUCT - PAINT INSPECTION CRITERIA PUBLISHED

RQSC 9A-5001 1/12/2012MAIN DRIVE SPUR GEAR PLASMA SPRAY MOLYBDENUM COATING

INSPECTION STANDARD PUBLISHED

RQSC-13Q-5002 5/21/2010 Turbine Discs and Rotatives in Waspaloy PUBLISHED

RQSC-17A-5001 11/17/2006 SHAFTS AND ASSOCIATED ROTATIVES IN CMV S PUBLISHED

RQSC-19Q-5002 9/20/2006 OUTER COMBUSTION CASE IN INCONEL 718 MAT PUBLISHED

RQSC-1B-5000 12/14/2006 GEARS IN PYROWEAR 53 MATERIAL PUBLISHED

RQSC-1T-5000 6/29/2004 SHAFTS IN TITANIUM 6/4 MATERIAL PUBLISHED

RQSC-20X-5001 4/23/2014 INSPECTION OF AE LEVER ARMS PRODUCED BY METAL INJECTION MOLDING PUBLISHED

RQSC-21T-5000 9/20/2006 SHAFTS IN TITANIUM 6246 MATERIAL PUBLISHED

RQSC-21T-5001 6/1/2006 TURBINE DISC AND ROTATIVES IN TITANIUM PUBLISHED

RQSC-3E-5001 8/5/2013 COMPRESSOR VANE ASSEMBLY INSPECTION PUBLISHED

RRES-90000 F 5/9/2019 ENGINEERING CONTROL OF PRODUCTION SOURCE AND METHOD PUBLISHED

RRES-90001 10/18/2011 ELECTRICAL WIRING PRACTICE - INDEX PUBLISHED

RRES-90001/200 11/11/2009ELECTRICAL WIRING PRACTICE - MARKING TEXT AND FONTS FOR HEAT

SHRINK MARKERS PUBLISHED

RRES-90001/201 11/11/2009ELECTRICAL WIRING PRACTICE-MARKING & APPLICATION OF STAINLESS

STEEL IDENTIFICATIPUBLISHED

RRES-90001/203 11/11/2009ELECTRICAL WIRING PRACTICE-APPLICATION OF HEAT SHRINK

IDENTIFICATION MARKERS PUBLISHED

RRES-90001/250 11/11/2009 ELECTRICAL WIRING PRACTICE-REMOVAL OF CABLE JACKET PUBLISHED

RRES-90001/251 11/11/2009 ELECTRICAL WIRING PRACTICE-REMOVAL OF CORE INSULATION PUBLISHED

RRES-90001/300 11/11/2009 ELECTICAL WIRING PRACTICE-PIGTAILNG OF SCREENS PUBLISHED

108

Specification


RRES-90001/301 11/11/2009 ELECTICAL WIRING PRACTICE - DEAD ENDING OF SCREENS PUBLISHED

RRES-90001/303 11/11/2009 ELECTRIC WIRING PRACTICE-TERMINATION OF DUAL SCREENS PUBLISHED

RRES-90001/304 4/19/2011 ELECTRICAL WIRING PRACTICE-TERMINATION OF DUAL SCREENS PUBLISHED

RRES-90001/350 4/19/2011ELECTRICAL WIRING PRACTICE - MARKING OF CLIPPING POSITIONS (OPEN

WIRE & BRAIDED PUBLISHED

RRES-90001/351 11/11/2009 ELECTICAL WIRING PRATICE-APPLICATION OF BAND/ITS PUBLISHED

RRES-90001/352 11/11/2009 ELECTRICAL WIRING PRACTICE-APPLICATION OF SUNBANDS PUBLISHED

RRES-90001/401 4/19/2011 ELECTRICAL WIRING PRACTICE-APPLICATION OF SUNBANDS PUBLISHED

RRES-90001/402 A 12/14/2015 ELECTRICAL WIRING PRACTICE - TAPING PUBLISHED

RRES-90001/420 11/11/2009 ELECTRICAL WIRING PRACTICE-APPLICATION OF HEATSHRINK SLEEVING PUBLISHED

RRES-90001/440 11/11/2009 ELECTICAL WIRING PRACTICE-APPLICATION OF HARNESS BRAID PUBLISHED

RRES-90001/441 11/11/2009 ELECTICAL WIRING PRACTICE-APPLICATION OF HARNESS BRAID PUBLISHED

RRES-90001/442 11/11/2009ELECTICAL WIRING PRACTICE- BRAIDING REQUIREMENTS FOR STAINLESS

STEEL OVERBRAID PUBLISHED

RRES-90001/443 11/11/2009ELECTICAL WIRING PRACTICE- BRAIDING REQUIREMENTS FOR STAINLESS

STEEL OVERBRAID PUBLISHED

RRES-90001/500 11/11/2009 ELECTRICAL WIRING PRACTICE-CRIMPING OF CONTACTS ONTO CABLE PUBLISHED

RRES-90001/501 11/11/2009ELECTRICAL WIRING PRACTICE-INSERTION OF CONTACTS INTO REAR RELEASE

CONNECTORS PUBLISHED

RRES-90001/520 12/4/2009 ELECTRICAL WIRING PRACTICE-APPLICATION OF STANDARD TERMINAL TAGS PUBLISHED

RRES-90001/540 11/11/2009 ELECTRICAL WIRING PRACTICE- ASSEMBLY OF ESC75/76/77 BACKSHELLS PUBLISHED

RRES-90001/541 11/11/2009 ELECTRICAL WIRING PRACTICE-APPLICATION SUPPORT BUSHES PUBLISHED

RRES-90001/542 11/11/2009ELECTRICAL WIRING PRACTICE-TERMINATION OF METAL OVERBRAID ONTO

BACKSHELL CLAMP SPUBLISHED

RRES-90001/560 11/11/2009ELECTRICAL WIRING PRACTICE-TERMINATION OF INDIVIDUAL CABLE SCREENS

ONTO INTEGRATPUBLISHED

RRES-90001/561 11/11/2009ELECTRICAL WIRING PRACTICE-APPLICATION OF PACKING SLEEVES FOR

CONNECTORS WITH INPUBLISHED

RRES-90001/562 12/4/2009ELECTRICAL WIRING PRACTICE-APPLICATION OF METALLIC BRAIDED SOCK TO

CONNECTORS WIPUBLISHED

109

Specification


RRES-90001/563 11/11/2009ELECTRICAL WIRING PRACTICE-HEAT SHRINKING OF BOOTS FOR USE WITH

CONNECTORS AND BPUBLISHED

RRES-90002 3/29/2007 CRITICAL PART CLASSIFICATION PUBLISHED

RRES-90003 E 7/16/2018 IDENTIFICATION MARKING METHODS & CONTROL PUBLISHED

RRES-90004 C 1/17/2017 EX[LANATION OF DWG TERMS AND TOLERANCE I PUBLISHED

RRES-90005 D 11/26/2019 TRACEABILITY OF SERIALISED ITEMS PUBLISHED

RRES-90008 A 2/14/2019 BALANCING OF GAS TURBINE ROTORS AND COMPONENTS PUBLISHED

RRES-90009 L 1/28/2021 REQUIREMENTS FOR DESIGN & DEV ACTIVITIES PUBLISHED

RRES-90010 B 3/2/2012 INSTALLATION OF THREADED KEY-LOCKED INSERTS PUBLISHED

RRES-90013 5/22/2009 ENGINEERING REQUIREMENTS FOR ROLLING ELEMENT BEARINGS PUBLISHED

RRES-90014 C 11/22/2019 ROLLS-ROYCE AEROTHERMAL AND MECHANICAL RIG TEST SPECIFICATION PUBLISHED

RRES-90016 3/10/2010 CURVIC® COUPLINGS PUBLISHED

RRES-90018 9/20/2011 INSTALLATION OF OPEN WIRE ELECTRICAL HARNESSES PUBLISHED

RRES-90019 3/11/2009 INSTALLATION AND REMOVAL OF SHANK NUTS PUBLISHED

RRES-90020 8/16/2011 INSPECTION AND TESTING OF ENGINE ELECTRICAL LOOMS AND HARNESSES PUBLISHED

RRES-90021 E 3/8/2019 INSTALLATIONS OF THINWALL SELF-LOCKING INCH TRHEADED INSERTS PUBLISHED

RRES-90023 4/17/2012 ROLLS-ROYCE FIRE TEST SPECIFICATION PUBLISHED

RRES-90024 5/17/2011MEASUREMENT TECHNIQUES TO ESTABLISH THE ELECTRICAL RESISTANCE

BETWEEN COMPONETS PUBLISHED

RRES-90027 G 10/8/2019 TORQUE TIGHTENING OF UNIFIED THREADED COMPONENTS PUBLISHED

RRES-90028 A 8/16/2016 INSTALLATION OF BLIND RIVETS PUBLISHED

RRES-90029 C 8/16/2016 Installation of Solid Rivets PUBLISHED

RRES-90031 4/19/2011PREPARATION OF FAYING SURFACES AND INSTALLATION OF ELECTRICAL

BONDING LEADS PUBLISHED

RRES-90033 D 5/2/2019 INSTALLATION OF INCH SELF-LOCKING WIRE THREAD INSERTS PUBLISHED

RRES-90036 7/1/2009 SURFACE TEXTURE CONTROL PUBLISHED

RRES-90037 A 8/19/2014 REMOVAL OF INCOMPLETE THREADS PUBLISHED

RRES-90038 B 9/24/2018 TURBINE BLADE & VANE PROFILE CONTROL & PROFILE TOLERANCE CONROL PUBLISHED

RRES-90042 3/18/2014 ALLOWABLE FILLER MATERIAL ALTERNATIVES FOR JOINING PROCESSES PUBLISHED

110

Specification


RRES-90043 F 5/2/2018 Unified Screw Threads, Manufacture and I PUBLISHED

RRES-90046 A 12/16/2014 PREPARATION OF COMPONENT PARTS FOR TAPER BOLTING PUBLISHED

RRES-90048 3/24/2010TORQUE TIGHTENING OF UNIFIED THREADED FASTENERS IN FACE TOOTH

JOINTS PUBLISHED

RRES-90049 10/20/2010 LOT TRACEABILITY PUBLISHED

RRES-90050 5/15/2014INTERPERATION OF DRAWING REUQIREMENTS AND INSPECTION OF DISC

AND BLADE ATTACHMENPUBLISHED

RRES-90051 12/18/2012 COMPONENT WEIGHING PUBLISHED

RRES-90052 1/22/2013 WHOLE ENGINE DEV TEST SUPPLIER REQUIREME PUBLISHED

RRES-90053 5/1/2019 INSTALLATION OF THREAED RING-LOCKED STU PUBLISHED

RRES-90055 2/19/2013 SPECIAL BUILD CONFIRMATION PUBLISHED

RRES-90057 5/21/2013 MATERIALS AND PROCESSES TO BE AVOIDED PUBLISHED

RRES-90058 3/17/2015 CURE DATE IDENTIFICAITON AND STORAGE OF ELASTOMERS PUBLISHED

RRES-90059 6/16/2015 TOOL AND FIXTURE DESIGN FOR SUPPLIERS PUBLISHED

RRES-90061 10/21/2014REQUIREMENTS FOR THE CONTROL OF ULTRA-VIOLET SOURCES UTILISING

LIGHT EMITTING DIPUBLISHED

RRES-90063 A 9/30/2019 CONTROL OF PTFE HOSE CRIMP/SWAGE PROCESS PUBLISHED

RRES-90071 1 3/27/2020Interpretation of Definition Requirements and the Inspection of Blade Firtree

RoPUBLISHED

RRES-90073 5/15/2018 Requirements for Software Development Suppliers PUBLISHED

RRES-90074 A 10/10/2018 Model Based Definition Interpretation PUBLISHED

RRES-90076 5/15/2018 Traceability of Lot-Manufactured Serialisd Items PUBLISHED

RRES-90080 4/16/2019QUALIFICATIONS TESTING REQUIREMENTS AND PROCEDURES FOR ROLLS-

ROYCE STANDARD PARTPUBLISHED

RRES-90080/107 5/2/2019MANFACTURE OF FORGED OR MACHINED TAPER BOLTS IN NICKEL ALLOY

MSRR 7016 PUBLISHED

RRES-90080/193 4/16/2019MANUFACTURE OF FORGED BOLTS IN QPY MSRR7160 (MP159) MATERIAL

1795 MPA TENSILE PUBLISHED

RRES-90080/247 4/16/2019TECHNICAL SPECIFICATION ALL METAL SELF LOCKING PAGODA NUTS (BLADE

LOCKING)IN DTDPUBLISHED

RRES-90080/255 4/16/2019MANUFACTURE OF FORGED OR MACHINED TAPER BOLTS IN DTD5638,

EN2952, EN2961 AND EN3PUBLISHED

111

Specification


RRES-90080/256 4/16/2019TECHNICAL SPECIFICATION THINWALL INSERTS, LONG, INCH, SCREW-

LOCKING PUBLISHED

RRES-90080/269 4/16/2019 Manufacture of Forged or Machined Nitride Hardened Taper Bolts PUBLISHED

RRES-90080/319 4/16/2019TECHNICAL SPECIFICATION FOR ALL-METAL SELF-LOCKING NUTS, UNJ

THREADS DRY FILM LUPUBLISHED

RRES-90080/320 4/16/2019TECHNICAL SPECIFICATION ALL-METAL SELF-LOCKING NUTS, UNJ THREADS,

DRY FILM, LUBRPUBLISHED

RRES-90080/321 4/16/2019TECHNICAL SPECIFICATION FORGED BOLTS IN TMM MSRR8707 (TITANIUM

BETA C) MATERIAL PUBLISHED

RRES-90080/322 4/16/2019TECHNICAL SPECIFICATION ALL-METAL SELF-LOCKING NUTS,UNJ THREADS,

DRY FILM LUBRICPUBLISHED

RRES-90080/324 4/16/2019TECHNICAL SPECIFICATION HELICAT COIL SCREW-LOCKING, DRY FILM

LUBRICANT COATED PUBLISHED

RRES-90080/325 4/16/2019TECHNICAL SPECIFICATION THINWALL SELF-LOCKING INSERTS COATED IN DRY

FILM LUBRICAPUBLISHED

RRES-90080/335 4/16/2019TECHNICAL SPECIFICATION CASTELLATED SELF-LOCKING NUTS, UNJ THREADS,

DRY FILM LUBPUBLISHED

RRES-90080/337 4/16/2019MANUFACTURE OF FORGED BOLTS IN AMS 4928 (6A3-4V

TITANIUM)MATERIAL COATED WITH PLPUBLISHED

RRES-90080/338 4/16/2019TECHNICAL SPECIFICATION SALVAGE THINWALL SELF-LOCKING INSERTS

COATED IN DRY FILMPUBLISHED

RRMS-30000 E 12/3/2019APPROVAL AND CONTROL OF FORGINGS AND PRODUCTS MANUFACTURED

BY OTHER BULK MATERIAPUBLISHED

RRMS-30001 D 7/30/2019SAMPLING AND TESTING OF WROUGHT ALLOY FORGING STOCK, MACHINING

BAR, AND FORGINGSPUBLISHED

RRMS-30002 D 6/8/2017MANUFACTURE OF FORGING STOCK AND MACHINING BAR FOR PREMINUM

MATERIALS REQUIRING PUBLISHED

RRMS-30003 D 3/3/2021 LABORATORY APPROVAL AND CONTROL PROCEDURE FOR CAST PRODUCTS PUBLISHED

RRMS-30004 B 8/24/2011 Component Approval and Statistical ContrOL OF CLASSIFIED FORGINGS PUBLISHED

RRMS-30004/1 C 2/5/2015COMPONENT APPROVAL AND STATISTICAL CONTROL OF CLASSIFIED

FORGINGS-GENERAL REQUIRPUBLISHED

112

Specification



FORGINGS-ONGOING CONTROPUBLISHED

RRMS-30004/3 B 10/19/2011COMPONENT APPROVAL AND STATISTICAL CONTROL OF CLASSIFIED

FORGINGS-ONGOING CONTROPUBLISHED


FORGINGS - CHEMISTRY COPUBLISHED

RRMS-30008 C 7/17/2017MANUFACTURING CONTROL OF POWDER AND FORGING STOCK PRODUCED

FROM POWDER TO BE USEPUBLISHED

RRMS-30009 8/6/2009CONTROL OF HAZARDS DURING THE MELTING OF PREMIUM GRADE

WROUGHT ALUMINIUM ALLOYS PUBLISHED

RRMS-30010 A 10/21/2013CONTROL OF HAZARDS DURING THE MELTING OF PREMIUM GRADE

WROUGHT STEEL MATERIALS PUBLISHED

RRMS-30011 B 4/3/2019CONTROL OF HAZARDS DURING THE MELTING OF PREMIUM QUALITY AND

FAN BLADE QUALITY TPUBLISHED

RRMS-30012 A 10/21/2013CONTROL OF HAZARDS DURING THE MELTING OF PREMIUM QUALITY

WROUGHT NICKEL-BASED MAPUBLISHED

RRMS-30013 D 3/2/2020MANUFACTURE OF FORGING STOCK AND MACHINING BAR FOR NON-

PREMIUM MATERIALS REQUIRIPUBLISHED

RRMS-30015 C 2/21/2017 STEEL CLEANNESS, EVALUATION PROCEDURE FOR WROUGHT STEELS PUBLISHED

RRMS-30018 10/18/2012 Phase Composition Control Calculation-PHAcomp PUBLISHED

RRMS-30019 9/16/2014ELECTRON PROBE MICROANALYSIS PROCEDURE FOR THE MEASUREMENT OF

ELEMENTAL SEGREGATPUBLISHED

RRMS-30020 C 1/21/2021PROCEDURAL REQUIREMENTS FOR THE CONDUCT OF MATERIALS PHYSICAL

PROPERTIES TESTINGPUBLISHED

RRMS-30022 A 5/29/2019 CONTROL OF SILICON NITRIDE BLANK MANUFAC PUBLISHED

RRMS-30024 A 6/10/2019 MANUFUACTURE AND HANDLING OF POWDER METALLURGY MATERIALS PUBLISHED

RRMS-30024/1 3/31/2014MANUFACTURE AND TESTING OF NET SHAPE/NEAR NET SHAPE POWDER

COMPACTS PUBLISHED

RRMS-30024/3 11/10/2019APPROVAL AND CONTROL OF THE MANUFACTURE OF COMPONENTS BY

LASER POWDER BED FUSIONPUBLISHED

RRMS-30024/4 9/15/2015 LABOROTORY APPROVAL AND CONTROL PROCEDUR PUBLISHED

RRMS-30025 A 3/27/2017 LABORATORY APPROVAL AND CONTROL FOR MOULDED PRODUCTS PUBLISHED

113

Specification


RRMS-30026 7/15/2014 QUALIFICATION TESTING OF POLYMER COMPOSITE PRE-IMPREGNATE PUBLISHED

RRMS-30030 10/23/2017 CONTROL OF PAINT MATERIALS PUBLISHED

RRMS-30031 B 11/21/2017 APPROVAL AND CONTROL OF CONSUMABLE MATER PUBLISHED

RRMS-30032 B 5/29/2019 PROCEDURAL REQUIREMENTS FOR QUALITY PUBLISHED

RRMS-30032/1 3/10/2010 STEEL, CORROSION RESISTANT, GENERAL BARS PUBLISHED

RRMS-30035 8/18/2017 PREPREG, UD CARBON FIBRE/EPOXY PUBLISHED

RRMS-30037 10/23/2017 STANDARD SURFACE ENGINEERING MEASUREMEN PUBLISHED

RRMS-30037/1 10/23/2017 REQUIREMENTS FOR THE CONDUCT OF COATING PUBLISHED

RRMS-30037/2 6/19/2018 Requirements for the Conduct of Coating PUBLISHED

RRMS-30037/3 6/19/2018 Requirements for the Conduct of Coating FURNACE CYCLIC TESTING PUBLISHED

RRMS-30037/4 6/11/2018 REQUIREMENTS FOR HARDNESS TESTING OF COA PUBLISHED

RRMS-30037/5 9/9/2019 REQUIRMENTS FOR THICKNESS MEASUREMENT OF COATINGS PUBLISHED

RRMS-30038 A 7/21/2020 PROCEDURAL REQUIREMENTS FOR THE HARDNESS PUBLISHED

RRMS-30039 7/12/2017 INSPECTION AND TESTING PROCEDURE FOR THE PUBLISHED

RRMS-30040 7/6/2017 PROCEDURAL REQUIREMENTS FOR THE CHEMICAL PUBLISHED

RRMS-30041 7/6/2017 CONFIRMATION OF THE ACCURACY OF CHEMICAL PUBLISHED

RRMS-30042 A 4/8/2019 NON-DESTRUCTIVE TESTING MODEL METHODS PUBLISHED

RRMS-30043 8/18/2017 WOVEN CARBON FIBRE / EPOXY PUBLISHED

RRMS-30044 10/19/2017 METALLURGICAL STANDARD FOR THE ASSESSMEN PUBLISHED

RRMS-30048 A 9/14/2020MICROSTRUCTURAL CLEANLINESS ASSESSMENT OF NICKEL POWDER

METALLURGY ALLOYS PUBLISHED

RRMS-30052 6/9/2019NICKEL ALLOY POWDER, 57NI-20CR-10CO-8.5M0-2.1TI-1.5AI, VACUUM

INDUCTION GAS ATOMPUBLISHED

RRMS-31001 A 10/21/2011STEEL, STOCK FOR FORGING, 3.25Cr - 0.95Mo - 0.2V(0.35-0.45C),

CONSUMABLE ELECTROPUBLISHED

RRMS-31002 B 11/11/2014 METALLURGICAL REQ ROLLING ELEMENT BEARINGS PUBLISHED

RRMS-31004 A 10/28/2009STEEL, BARS AND FORGING STOCK, 3.2Cr-0.6Mo-0.5Mn(0.2-0.28C),

ANNEALED COMMON DESPUBLISHED

RRMS-31004/1 A 12/15/2009STEEL,BARS AND FORGING STOCK, 3.2Cr-0.6MN (0.2-0.28C), HARDENED AND

TEMPERED COMPUBLISHED

RRMS-31005 A 11/3/2009STEEL, BARS AND STOCK FOR FORGING, 3.25C-0.95M-0.2V(0.35-0.45C)TRIPLE

MELTED ANDPUBLISHED

114

Specification


RRMS-31005/1 A 12/15/2009STEEL,BARS AND STOCK FOR FORGING, 3.25Cr-0.95Mo-0.2V(0.35-0.34C),

TRIPLE MELTED,PUBLISHED

RRMS-31006 B 3/2/2012STEEL, STOCK FOR FORGING AND FORGINGS, PREMIUM QUALITY, 13.5Co-

11.5Ni-3.1Cr-1.2MPUBLISHED

RRMS-31007 A 3/2/2012STEEL, BAR, PREMIUM QUALITY, 13.5Co-11.5Ni-3.1Cr-1.2Mo (0.21-0.25C),

NORMALIZED PUBLISHED

RRMS-31009 A 10/11/2012STEEL, BAR FORGINGS, AND STOCK FOR FORGING, PREMIUM QUALITY,

3.25Cr-0.95mO-0.2V(PUBLISHED

RRMS-31010 B 8/21/2013STEEL, FORGINGS, PREMIUM QUALITY, 3.25Cr-0.95Mo-0.2V (0.35-0.43C)

CONSUMABLE ELEPUBLISHED

RRMS-31011 A 11/21/2011STEEL, BARS AND STOCK FOR FORGING, 3.25Cr-0.95Mo-0.2V (0.35-0.43C),

TRIPLE MELTEPUBLISHED

RRMS-31012 A 11/22/2011STEEL, FORGINGS, 3.25Cr-0.95Mo-0.2V (0.35-0.43C) TRIPLE MELTED,

HARDENED AND TEMPUBLISHED

RRMS-31013 A 6/8/2017ALLOY ITRON POTS, CAST AND FINISHED, 14Cr-0.1Mo, ANNEALED COMMON

DESIGNATION: 'CPUBLISHED

RRMS-31013/1 6/8/2017 ALLOY IRON POTS, CASTINGS, 14CR-0.4MO, A PUBLISHED

RRMS-31014 B 3/2/2017STEEL, ELECTROLFLUX REMELTED STOCK FOR FORGING, FORGINGS, AND BAR

,FE-4Ni-1.2Cr-PUBLISHED

RRMS-31014/1 A 3/28/2019 STEEL, BARS AND FORGINGS, FE-4NI-1.2CR- PUBLISHED

RRMS-31015 A 3/21/2017Steel, Bars and Forgings, 4.1Cr - 4.2Mo - 1.0V (0.80 - 0.85C), Double Vacuum

MelPUBLISHED

RRMS-31016 C 8/22/2019 Steel, Bars, Forgings, and Stock for Forgings, 4.1Cr - 3.4Ni - 4.2Mo - 1.2V (0.1 PUBLISHED

RRMS-31017 B 4/17/2018STEEL, BARS AND FORGINGS Suitable for Carburizing...Premium Aircraft-

Quality forPUBLISHED

RRMS-31018 B 3/21/2017 STEEL BARS AND STOCK FOR FORGING, 3.25 C PUBLISHED

RRMS-31018/1 B 6/19/2018 STEEL, BARS AND FORGINGS PUBLISHED

RRMS-31018/2 3/20/2017 STEEL, BARS, 3.25-06MON PUBLISHED

RRMS-31018/3 A 3/1/2019 STEEL, BARS AND FORGINGS, 3.25CR PUBLISHED

RRMS-31019 A 6/27/2012STEEL, BARS AND FORGINGS, 3.2Cr-0.6Mo-0.5MN (0.2-0.28C HARDENED AND

TEMPERED COMPUBLISHED

115

Specification


RRMS-31020 5/13/2010STEEL, FORGINGS AND BAR, PREMIUM QUALITY 18Ni-7.8Co-4.9Mo-0.40Ti-

0.10Al VACUUM IPUBLISHED

RRMS-31021 6/29/2011 Steel, Bars, Forgings, Stock for Forging, and Tubing 1.45Cr (0.90 - 1.10C) PUBLISHED

RRMS-31022 A 7/29/2019 Steel, Bars, Forgings, and Stock for Forging, 0.90Si - 1.0Cr - 2.0Ni - 3.2Mo - 2 PUBLISHED

RRMS-31023 A 11/27/2018 STEEL, STOCK FOR FORGING, PREMIUM QUALIT PUBLISHED

RRMS-31023/1 A 11/28/2018 STEEL, BARS AND FORGINGS, PREMIUM PUBLISHED

RRMS-31023/2 1/20/2017 STEEL, BARS AND FORGINGS, PREMIUM QUALIT PUBLISHED

RRMS-32002 A 10/29/2009STEEL, STOCK FOR FORGING, GENERAL BARS, FORGINGS AND AEROFOIL

FORGINGS, 10Cr-6CoPUBLISHED

RRMS-32002/1 3/10/2010Steel, Corrosion Resistant, General Bars and Forgings, 10Cr - 6Co - 0.8Mo,

ConsuPUBLISHED

RRMS-32002/2 3/11/2010STEEL, CORROSION RESISTANT, AEROFOIL FORGINGS, 10Cr-6Co-

0.8Mo,CONUMABLE ELECTRODPUBLISHED

RRMS-32006 B 6/21/2016STEEL, SHEET AND PLATE, 11Cr-1Mo-0.85Mn-0.65Ni-0.25V, ANNEALED

COMMON DESIGNATIOPUBLISHED

RRMS-32006/1 2/2/2017 STEEL, CORROSION RESISTANT, SHEET AND ST PUBLISHED

RRMS-32007 C 6/19/2018STEEL, STOCK FOR FORGINGS AND FLASH WELDED RINGS, BARS AND

FORGINGS, 12Cr-2Ni-2MPUBLISHED

RRMS-32007/1 A 5/15/2018 STEEL, BARS/SECTION AND FORGINGS, 12CR-2 PUBLISHED

RRMS-32007/2 A 6/19/2018 STEEL, FLASH WELDED RINGS, 12CR-2NI-2MO PUBLISHED

RRMS-32007/3 A 2/28/2019 STEEL, COMPRESSOR BLADE FORGINGS, 12CR-2 PUBLISHED

RRMS-32007/4 2/21/2017 STEEL, EXTRUSIONS, 12CR-2NI-2MO-0.3V, AI PUBLISHED

RRMS-32008 A 1/25/2013STEEL, BARS, SECTION, FORGINGS, EXTRUSTIONS AND FLASH WELDED RINGS,

12Cr-2Ni-2MoPUBLISHED

RRMS-32009 D 4/17/2018 STEEL, CORROSION AND HEAT-RESISTANT, PRE PUBLISHED

RRMS-32010 3/2/2012Steel, Stock for Forging and Forgings, Premium Quality, 13.5Co - 11.5Ni -

3.1Cr PUBLISHED

RRMS-32011 3/2/2012Steel, Bar, Premium Quality, 13.5Co - 11.5Ni - 3.1Cr - 1.2Mo (0.21-0.25C),

NormaPUBLISHED

RRMS-32012 A 5/23/2019STELL ALLOY, METAL INJECTION MOULDED, 16Cr-4Cu, SINTERED , SOLUTION

HEAT TREATEDPUBLISHED

116

Specification


RRMS-32013 1/2/2017 STEEL, CORROSION AND HEAT-RESISTANT, PUBLISHED

RRMS-32014 A 4/17/2018 STEEL, STOCK FOR AEROFOIL FORGING AND BA PUBLISHED

RRMS-32014/1 A 4/17/2018 STEEL, AEROFOIL FORGING PUBLISHED

RRMS-32014/2 A 4/17/2018 STEEL, BAR, 15CR-6.5NI PUBLISHED

RRMS-33001 D 1/28/2011NICKEL ALLEY, CORROSION AND HEAT-RESISTANT, IN THE FORM OF FORGING

STOCK 52.5NI PUBLISHED

RRMS-33001/1 B 2/1/2011NICKEL ALLOY, CORROSION-AND HEAT-RESISTANT FORGINGS, PREMIUM

QUALITY, 52.5Ni-19CPUBLISHED

RRMS-33002 C 3/31/2011NICKEL ALLOY, CORROSION-AND HEAT RESISTANT FORGING STOCK,

PREMIUM QUALITY, SOLUTPUBLISHED

RRMS-33002/1 A 3/30/2011NICKEL ALLOY, CORROSION-AND HEAT-RESISTANT FORGINGS, PREMIUM

QUALITY ,57Ni-19.5CPUBLISHED

RRMS-33003 B 3/24/2017NICKEL ALLOY, CORROSION AND HEAT RESISTANT, Ni-Cr-14W-2Mo,VACUUM

INDUCTION MELTEPUBLISHED

RRMS-33004 G 4/17/2018 NICKEL ALLOY, CAST, SINGLE CRYSTAL Ni-9. PUBLISHED

RRMS-33004/1 7/13/2017 NICKEL ALLOY, CAST, SINGLE CRYSTAL, NI-9 PUBLISHED


RRMS-33004/3 7/13/2017 NICKEL ALLOY, CAST, SINGLE CRYSTAL, NI9. PUBLISHED


RRMS-33005 D 3/15/2017NICKEL ALLOY, LOW CARBON, CASTINGS, INVESTMENT, VACUUM MELTED,

VACUUM CAST, DIREPUBLISHED

RRMS-33007 C 2/1/2011NICKEL ALLOY, FORGING STOCK, PREMIUM QUALITY SOLUTION AND

PRECIPITATION HEAT TREPUBLISHED

RRMS-33007/1 B 4/1/2011NICKEL ALLOY, FORGING STOCK, PREMIUM QUALITY SOLUTION AND

PRECIPITATION HEAT TREPUBLISHED

RRMS-33007/2 C 2/2/2011NICKEL ALLOY, CORROSION AND HEAT-RESISTANT FORGINGS, PREMIUM

QUALITY, MADE FROM PUBLISHED

RRMS-33008 C 7/13/2017NICKEL ALLOY, FORGING STOCK, PREMIUM QUALITY Ni-18.5Co - 15Cr - 5Mo -

2Ta -3.6Ti PUBLISHED

RRMS-33008/1 C 7/13/2017NICKEL ALLOY, FORGINGS, PREMIUM QUALITY Ni - 18.50Co - 15Cr -5Mo - 2Ta -

3.6AI - PUBLISHED

117

Specification


RRMS-33009 C 11/18/2014NICKEL ALLOY, CORROSION-AND HEAT RESISTANT, INVESTMENT CAST 16Cr-

8.5Co-3.4Ti-3.4PUBLISHED

RRMS-33010 H 6/10/2020 NICKEL ALLY, CAST, SINGLE CRYSTAL PUBLISHED

RRMS-33011 D 3/27/2018Nickel Alloy, Corrosion and Heat Resistant, Castings, Investment, Ni - 9.5W -

9.PUBLISHED

RRMS-33013 B 12/8/2009NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, STOCK FOR

FORGING FORGINGS, FLPUBLISHED

RRMS-33013/1 A 12/2/2009NICKEL ALLOY, CORROSION-AND HEAT-RESISTANT, FORGINGS AND FLASH

WELDED RINGS, 20CPUBLISHED

RRMS-33014 A 11/18/2009FORGINGS, EXTRUSTIONS, AND FLASH WELDED RINGS, 20Cr-19.7Co-5.8Mo-

2.1Ti, SOULUTIOPUBLISHED

RRMS-33014/1 A 12/2/2009NICKEL ALLOY,CORROSION AND HEAT RESISTANT, BARS, FORGINGS AND

FLASH WELDED RINGSPUBLISHED

RRMS-33015 D 11/21/2017 Nickel Alloy, Cast, Single Crystal, Ni - 8.5Ta - 6.8Re - 5.85Al - 5.5W - 3.1Co - PUBLISHED

RRMS-33016 A 5/16/2017Nickel Alloy, Castings, Investment, Vacuum Melted, Vacuum Cast Ni - 10Co -

10W -PUBLISHED

RRMS-33017 C 4/16/2019NICKEL ALLOY, CORROSION-AND HEAT-RESISTANT, CAST, Ni-15Cr-10Co-8Mo-

4.2Al-3.6Ti CPUBLISHED

RRMS-33021 C 5/14/2019 Nickel Alloy, Corrosion and Heat Resistant, Bars, Stock for Forging, Forgings, a PUBLISHED

RRMS-33021/1 11/21/2017 NICKEL ALLOY, CORROSION AND HEAT PUBLISHED

RRMS-33021/2 A 5/14/2019 NICKEL ALLOY, CORROSION AND HEAT PUBLISHED




RRMS-33022 9/23/2009Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Flash Welded

RinPUBLISHED

RRMS-33023 A 3/27/2017 Nickel Alloy, Corrosion and Heat Resistant, Cast, Ni - 20Cr - 20Co - 6Mo - 2Ti, PUBLISHED

RRMS-33023/1 A 4/17/2018 NICKEL ALLOY/CASTINGS OR FINISHED PARTS/ PUBLISHED

RRMS-33027 A 5/2/2017Nickel Alloy, Corrosion and Heat Resistant, Forging Stock and Forgings, Ni -

19.PUBLISHED

118

Specification


RRMS-33027/1 5/2/2017 NICKEL ALLOY/FORGINGS AND RINGS/ NI PUBLISHED

RRMS-33027/2 5/2/2017 NICKEL ALLOY/FORGINGS/FINSHED PARTS/ NI PUBLISHED

RRMS-33027/3 5/2/2017 NICKEL ALLOY/FORGINGS/ RINGS/FINISHED PA PUBLISHED

RRMS-33028 5/18/2010NICKEL ALLOY, CORROSION AND HEAT RESISTANT, FORGINGS, Ni-19.5Cr-

13.5Co-4Mo-3Ti-1PUBLISHED

RRMS-33029 B 3/29/2017 Nickel Alloy, Corrosion- and Heat-Resist PUBLISHED

RRMS-33029/1 A 4/17/2018 NICKEL ALLOY, CORROSION AND HEAT RESISTA PUBLISHED



RRMS-33029/4 A 4/17/2018 NICKEL ALLOY, CORROSION AND HEAT RESISTN PUBLISHED


RRMS-33030 A 3/21/2017 Nickel Alloy, Corrosion- and Heat-Resistant, Stock for Forging, Bars, Forgings, PUBLISHED

RRMS-33030/1 3/21/2017 NICKEL ALLOY, CORROSION AND HEAT RESISTA PUBLISHED

RRMS-33030/2 5/11/2017 NICKEL ALLOY,CORROSION AND HEAT RESISTAN PUBLISHED

RRMS-33031 A 5/2/2017NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, STOCK FOR

FORGING, FORGINGS, FPUBLISHED

RRMS-33031/1 A 5/16/2018 NICKEL ALLOY/BARS/NI-20CR-20CO-5.9MO-2.1 PUBLISHED

RRMS-33031/2 5/2/2017 NICKEL ALLOY/WIRE/NI-20CR-20CO-5.9MO-2.1 PUBLISHED

RRMS-33031/3 A 5/16/2018 NICKEL ALLOY/ FORGINGS/NI-20CR-20CO PUBLISHED

RRMS-33031/4 C 9/11/2019 NICKEL ALLOY/FORGINGS/EXTRUSIONS/FINISHE PUBLISHED

RRMS-33032 A 2/21/2018Nickel Alloy, Corrosion- and Heat-Resistant, Forgings and Flash Welded

Rings,20CPUBLISHED

RRMS-33033 E 2/22/2019Nickel Alloy, Corrosion and Heat Resistant, Cast, Ni # 16Cr # 10Co # 5Mo # 1Al

#PUBLISHED



RRMS-33037 A 11/18/2014 Nickel Alloy, Corrosion and Heat Resistant, Cast, Single Crystal, Ni - 0.015C - PUBLISHED

RRMS-33038 E 12/6/2018NICKEL ALLOY, CAST, SINGLE CRYSTAL, Ni - 9.6Co - 6.5Ta - 6.4Cr - 6.4W - 5.6Al

- PUBLISHED

RRMS-33039 A 4/17/2018 NICKEL ALLOY, METAL INJECTION MOULDED PUBLISHED

119

Specification


RRMS-33041 3/31/2014NICKEL ALLOY, CORROSION-AND HEAT-RESISTANT, POWDER, Ni-15.5Co-15Cr-

5Mo-2Ta-3.6TiPUBLISHED

RRMS-33041/1 A 3/28/2019NICKEL ALLOY, HEAT-RESISTANT, POWDER HIP COMPACTS, Ni - 18.5Co - 15Cr -

5Mo - 2TPUBLISHED

RRMS-33042 2/21/2018 SPECIFICATION FOR IN718 POWDER TO BE USE PUBLISHED

RRMS-33045 A 4/19/2018 NICKEL ALLOY/BARS OR SECTIONS/NI-20 PUBLISHED

RRMS-33045/1 A 6/19/2018 NICKEL ALLOY/FLASH WELDED RNGS/NI-20CR PUBLISHED

RRMS-33045/2 A 6/19/2018 NICKEL ALLOY/FLASH WELDED RINGS/ NI PUBLISHED

RRMS-33045/3 A 6/19/2018 NICKEL ALLOY/FINISHED PARTS OR FLASH WEL PUBLISHED

RRMS-33046 5/2/2017 NICKEL ALLOY/BARS/NI-19,5CR-13.5CO-4MO3T PUBLISHED

RRMS-33046/1 5/2/2017 NICKEL ALLOY/BARS AND FINISHED PARTS/ NI PUBLISHED

RRMS-33047 5/2/2017 NICKEL ALLOY, CORROSION AND HEAT RESISTA PUBLISHED

RRMS-33050 A 5/14/2019 NICKEL ALLOY, CORROSION AND HEAT PUBLISHED



RRMS-33051 9/24/2018 NICKEL ALLOY, CORROSION AND HEAT RESISTA PUBLISHED

RRMS-33052 A 12/2/2020Nickel Alloy Powder, 57Ni-20Cr-10Co-8.5Mo-2.1Ti-1.5Al,Vacuum Induction

Gas AtomiPUBLISHED

RRMS-33057 A 9/4/2019 NICKEL ALLOY RESEAL POWDER FOR REPAIR PUBLISHED

RRMS-33058 10/15/2018 NICKEL ALLOY, CAST, SINGLE CRYSTAL NI-11 PUBLISHED

RRMS-33059 12/12/2018 NICKEL ALLOY/CORROSION AND HEAT RESISTAN PUBLISHED


RRMS-33059/2 12/12/2018 NICKEL ALLOY, CORROSION AND HEAT RESTIST PUBLISHED


RRMS-33059/4 12/12/2018 NICKEL ALLOY, CORROSION AND HEAT RESIST PUBLISHED

RRMS-33063 4/12/2018 NICKEL ALLOY, CORROSION AND HEAT-RESIST PUBLISHED

RRMS-33067 7/3/2019 POWDER, 25% NI AND 75% NI-AI, BLENDED PUBLISHED

RRMS-33068 7/3/2019 NICKEL POWDER, COARSE PUBLISHED

RRMS-34000 B 11/21/2017Aluminium Alloy, Bar, Extrusion and Stock for Forging, Al, 2.3Cu, 1.5Mg,

1.1Ni, PUBLISHED

RRMS-34000/1 11/21/2017 ALUMINIUM ALLOY, BARS AND EXTRUSIONS AI- PUBLISHED

RRMS-34000/2 A 12/19/2017 ALUMINIUM ALLOY, BARS AND EXTRUSIONS AI- PUBLISHED

120

Specification




RRMS-34001 C 11/21/2017ALUMINIUM ALLOY, BAR, EXTRUSIONS, RINGS AND FORGINGS, AI-2.3Cu-

1.5M1.1Ni-1.1Fe, PUBLISHED

RRMS-34001/1 11/21/2017 ALUMINIUM ALLOY, FORGINGS AI-2.3CU-1.5MG PUBLISHED

RRMS-34001/2 A 12/19/2017 ALUMINUM ALLOY, FORGINGS AI PUBLISHED

RRMS-34001/3 11/21/2017 ALUMINUM ALLOY, RING ROLLED FORGING PUBLISHED

RRMS-34001/4 B 6/19/2018 ALUMINUM ALLOY, RING ROLLED FORGINGS AI- PUBLISHED

RRMS-34006 8/20/2019 MAGNESIUM ALLOY CASTINGS MG-1.3RE-4.2ZN PUBLISHED

RRMS-36000 G 3/7/2019TITANIUM ALLOY, STOCK FOR FORGININGS, PREMIUM QUALITY 6.OAI-4.0V

COMMON DESIGNATPUBLISHED

RRMS-36000/1 C 5/11/2017TITANIUM ALLOY, FORGINGS, Ti-6.0Al-4.0V, SOLUTION TREATED AND

ANNEALED COMMON DEPUBLISHED

RRMS-36000/2 A 8/30/2018 TITANIUM ALLOY, FORGINGS, TI PUBLISHED

RRMS-36001 F 11/15/2018TITANIUM ALLOY, STOCK FOR FORGINGS, PREMIUM QUALITY, 6.0AI-2.0Sn-

4.0Zr-6.0Mo COMPUBLISHED

RRMS-36001/1 C 8/16/2016 TITANIUM ALLOY, FORGINGS, Ti-6.0AI-2.0Sn PUBLISHED

RRMS-36002 A 8/13/2009 TITANIUM ALLOY, WROUGHT PRODUCTS, Ti-6.0 PUBLISHED

RRMS-36003 E 11/17/2014TITANIUM ALLOY, CAST, HOT ISOSTATIC PRESSED SOLUTION AND

PRECIPITATION HEAT TREAPUBLISHED

RRMS-36004 D 6/28/2012TITANIUM ALLOY, STOCK FOR FORGINGS, PREMIUM QUALITY, 6.0AI-2.0Sn-

4.0Zr-2.0Mo COMPUBLISHED

RRMS-36004/1 C 4/1/2011TITANIUM ALLOY, FORGINGS, Ti6.0AI2.0Sn 4.0Zr 2.0Mo COMMON

DESIGNATION: Ti6242 PUBLISHED

RRMS-36005 E 6/19/2018TITANIUM ALLOY, 6.0AI4.0V, SHEET FOR SUPERPLASTIC FORMING COMMON

DESIGNATION: TiPUBLISHED

RRMS-36006 D 4/9/2019TITANIUM ALLOY, CROSS-ROLLED AND UPSET-FORGED, 6.0AI-4.0V, PREMIUM

QUALITY PLATEPUBLISHED

RRMS-36006/1 6/19/2018 Titanium Alloy, Plate (thickness < 25 mm PUBLISHED

RRMS-36006/2 6/19/2018 Titanium Alloy, Plate, 6.0Al 4.0V, Vac PUBLISHED

RRMS-36007 B 3/31/2011TITANIUM ALLY, 6.0AI 4.0V, CROSS-ROLLED AND UPSET FORGED PREMIUM

QUALITY PLATE CPUBLISHED

121

Specification


RRMS-36008 F 11/15/2018TITANIUM ALLOY, CROSS-ROLLED AND UPSET-FORGED, 6.0AI-4.0V, PREMIUM

QUALITY PLATEPUBLISHED

RRMS-36010 C 1/28/2019Titanium Alloy, Single-Melt Wrought Products, Ti - 6.0Al - 4.0V, Forgings and

StPUBLISHED

RRMS-36017 C 5/29/2019TITANIUM ALLOY, WROUGHT PRODUCTS, BAR, AEROFOIL FORGINGS AND

STOCK FOR FORGING, PUBLISHED

RRMS-36017/1 2/28/2017 TITANIUM ALLOY, BARS AND AEROFOIL FORGIN PUBLISHED

RRMS-36018 B 8/15/2017TITANIUM ALLOY, WROUGHT PRODUCTS, BAR, FORGINGS AND STOCK FOR

FORGING, Ti-6.0Al-PUBLISHED

RRMS-36018/1 8/15/2017 TITANIUM ALLOY, BARS AND FORGINGS TI- PUBLISHED

RRMS-36018/2 8/21/2017 TITANIUM ALLOY, LARGE RING FORGINGS PUBLISHED

RRMS-36019 C 3/12/2019TITANIUM ALLOY, WRIGHT PRODUCTS, BAR FOR MACHINING, AEROFOIL

FORGINGS AND STOCK PUBLISHED

RRMS-36019/1 7/13/2017 TITANUM ALLOY, AEROFOIL FORGINGS, TI-6.0 PUBLISHED

RRMS-36021 A 2/9/2015TITANIUM ALUMINIDE, CENTRIFUGAL INVESTMENT CASTINGS, TI-30.5AI -

2.8MN - 4.6NB -PUBLISHED

RRMS-36022 A 1/9/2018TITANIUM ALLOY, SINGLE-MELT WROUGHT PRODUCTS, FORGINGS AND

STOCK FOR FORGING,Ti-PUBLISHED

RRMS-36022/1 1/9/2018 TITANIUM ALLOY, BILLET STOCK FOR FORGING PUBLISHED

RRMS-36022/2 1/9/2018 TITANIUM ALLOY, FORGINGS, TI-0.85A1-3.9V PUBLISHED

RRMS-36032 A 6/19/2018 TITANIUM ALLY, PLATE (THICKNESS<100MM), PUBLISHED

RRMS-36034 10/19/2017 TITANIUM ALLOY, BARS, TI-6.0AI-4.0V, MUL PUBLISHED

RRMS-36035 10/19/2017 TITANIUM ALLOY, STOCK FOR FORGING, TI-6. PUBLISHED

RRMS-36035/1 10/19/2017 TITANIUM ALLOY, BARS, TI-6.0AI-4.V, PUBLISHED

RRMS-36036 8/20/2019TITANIUM ALLOY, DISCS AND ASSOCIATED ROTATING COMPONENTS, TI-5.6AI-

4SN-3.6ZR-0.7PUBLISHED

RRMS-37001 A 3/20/2017 FELTMETAL ABRADABLE SEALS PUBLISHED

RRMS-37001/1 8/2/2017 HASTELLOY X-FELTMETAL ABRADABLE SEALS PUBLISHED

RRMS-37001/2 8/2/2017 LOW DENSITY FECRAIY-FELTMETALABRADABLE S PUBLISHED

RRMS-38000 B 7/15/2014FILLER METAL, BRAZING WIDE GAP POWDER, NICKEL BASE NOMINAL

COMPOSITION 1.1 Si-14PUBLISHED

122

Specification


RRMS-38001 4/21/2011Nickel Alloy, Corrosion and Heat Resistant, Welding Wire, Ni - 16Cr - 10Co -

5MoPUBLISHED

RRMS-38002 A 3/22/2013NICKEL-PALLADIUM ALLOY, BRAZING FILLER METAL 50Ni-36Pd-10.5Cr-3B-

0.5Si ,820 TO 9PUBLISHED

RRMS-38004 2/6/2019 WELDING AND BRAZING FILLER MATERIALS PUBLISHED

RRMS-40000 B 10/20/2015 8% Wt. YTTRIA-STABILIZED ZIRCONIA POWDER PUBLISHED

RRMS-40001 B 7/19/2016 COBALT-NICKEL-CHROMIUM-ALUMINIUM-YTTRIUM POWDER PUBLISHED

RRMS-40002 11/2/2010HIGH TEMP MARKING MATERIALS FOR IDENTIFICATION OF COMPONENTS

AND ASSEMBLIES PUBLISHED

RRMS-40005 B 9/13/2009 COPPER-NICKEL-INDIUM POWDER PUBLISHED

RRMS-40006 A 7/27/2009 MOLYBDENUM POWDER PUBLISHED

RRMS-40007 10/8/2009DRY FIL LUBRICANT, GRAPHITE, FRICTION AND WEAR-RESISTANT,

500°C(926°F)MAX PUBLISHED

RRMS-40007/1 3/11/2010 Dry Film Lubricant, Anti-Fret, Graphite PUBLISHED

RRMS-40008 C 3/18/2019 SACRIFICIAL HEAT-AND CORROSION-RESISTANT PUBLISHED

RRMS-40009 A 7/27/2009 SACRIFICIAL HEAT-AND CORROSION-RESISTANT PUBLISHED

RRMS-40010 3/11/2010 Dry Film Lubricant, Anti-Fret PUBLISHED

RRMS-40011 B 9/29/2009 POWDER, ALUMINIUM-CHROMIUM-MANGANSE ALLOY PUBLISHED

RRMS-40012 10/22/2009 EPOXY TOP COAT-TWO PART, ROOM TEMP CURE PUBLISHED

RRMS-40013 A 9/3/2009 HEAT CURED EPOXY COATING (PRIMER) PUBLISHED

RRMS-40014 10/12/2009 POWDER, NICKEL-CHROMIUM-ALUMINIUM+BENTONITE COMPOSITE PUBLISHED

RRMS-40015 A 3/18/2019 POWDER, TUNGSTEN CARBIDE-17% COBALT PUBLISHED

RRMS-40016 8/27/2009 COMPOSITE WIRE, 80 NICKEL-20 ALUMINIUM PUBLISHED

RRMS-40017 10/8/2009DRY FILM LUBRICANT, MOLYBDENUM DISULFIDE, FRICTION-AND WEAR-

RESISTANT, 300°C (57PUBLISHED

RRMS-40017/1 3/11/2010DRY FILM LUBRICANT, ANTI-FRET,MOLYBDENUM DISULFIDE COMMON

DESIGNATION: SILOXSEALPUBLISHED

RRMS-40018 A 9/1/2009 HEAT CURED EPOXY COATING (TOP COAT) PUBLISHED

RRMS-40019 A 4/3/2019 POWDER, ALUMINIUM ALLOY + POLYESTER PUBLISHED

RRMS-40020 A 6/21/2016 POWER, ALUMINIUM OXIDE PUBLISHED

RRMS-40021 10/12/2009 POWDER, ALUMINIUM-12SILICON+BORON NITRIDE + POLYESTER PUBLISHED

RRMS-40022 10/6/2009 POWDER, 95 NICKEL-5 ALUMINIUM COMPOSITE PUBLISHED

123

Specification


RRMS-40023 10/12/2009 POWDER, COMPOSITE:ALUMINIUM-8 SILICON + BORON NITRIDE + ORGANICS PUBLISHED

RRMS-40024 10/13/2009POWDER, COBALT-MOLYBDENUM-CHROMIUM-SILICON ALLOY COMMON

DESIGNATION: TRIBALOY 40PUBLISHED

RRMS-40025 A 7/19/2016POWDER, COBALT-MOLYBDENUM-CHROMIUM-SILICON ALLOY COMMON

DESIGNATION: TRIBALOY 80PUBLISHED

RRMS-40026 10/6/2009 POWDER, 75 CHROMIUM CARBIDE/25 NICKEL-CHROMIUM, BLENDED PUBLISHED

RRMS-40027 3/11/2010 Powder, Composite: 60 Aluminium/Silicon - 40 Graphite PUBLISHED

RRMS-40028 3/10/2011 Powder, CoNiCrAlY + Boron Nitride + Polyester PUBLISHED

RRMS-40029 B 4/6/2017 Powder, 75 Chromium Carbide / 25 Nickel Chromium, Blended PUBLISHED

RRMS-40030 11/4/2010 TWO PART POLYURETHANE COATING (TOP COAT) PUBLISHED

RRMS-40031 10/22/2009 EPOXY PRIMER-TWO PART, ROOM TEMP CURE PUBLISHED

RRMS-40032 A 3/18/2019 POWDER, TUNGSTEN CARBIDE-COBALT FOR PLASMA SPRAY PUBLISHED

RRMS-40033 11/17/2011POWDER, NICKEL-CHROMIUM-ALUMINIUM-IRON-MOLYBDENUM FOR

PLASMA SPRAY PUBLISHED

RRMS-40034 A 7/19/2016 WIRE, HIGH Cr STAILESS STEEL (TYPE 420) PUBLISHED

RRMS-40035 A 7/19/2016 POWDER, TUNGSTEN CARBIDE/COBALT CHROMIUM FOR HVOF APPLICATION PUBLISHED

RRMS-40036 A 6/21/2016POWDER, COBALT-NICKEL-CHROMIUM-ALUMINIUM-YTTRIUM FOR HVOF

APPLICATION PUBLISHED

RRMS-40037 11/17/2011POWDER, COBALT-NICKEL-CHROMIUM-ALUMINIUM-YTTRIUM FOR HVOF


RRMS-40038 11/3/2010 POWDER, COMPOSITE, NICKEL CHROMIUM/ALUMINIUM ALLOY PUBLISHED

RRMS-40039 11/4/2010 POWDER, CHROMIUM OXIDE PUBLISHED

RRMS-40040 11/4/2010 POWDER, COMPOSITE, NICKEL MOLYBDENUM ALUMINIUM PUBLISHED

RRMS-40041 11/4/2010 POWDER, ALUMINUM OXIDE FOR HVOF APPLICAT PUBLISHED

RRMS-40042 11/5/2010 POWDER, ZIRCONIA FOR HVOF APPLICATON PUBLISHED

RRMS-40043 11/5/2010 POWDER, FINE, COBALT BASE ALLOY FOR PLASMA SPRAYING PUBLISHED

RRMS-40044 9/21/2011 POWDER, ALUMINIUM BRONZE +POLYESTER PUBLISHED

RRMS-40047 9/17/2013Dry Film Lubricant, Polytetrafluoroethylene (PTFE), Friction- and Wear-

ResistantPUBLISHED

124

Specification


RRMS-40047/1 9/17/2013DRY FILM LUBRICANT, POLYTETRAFLUOETHYLENE (PTE), FRICTION-AND

WEAR-RESISTANT, 25PUBLISHED

RRMS-40048 3/8/2013 RELEASE COATING SILICONE BASED PUBLISHED

RRMS-40050 7/15/2014 POWDER, NICKEL-CHROMIUM-ALUMINIUM-YTTRIUM PUBLISHED

RRMS-40052 10/30/2015 THERMAL BARRIER COATING SYSTEM FOR RRMS PUBLISHED

RRMS-40054 12/16/2014 WEAR-RESISTANT ELECTROPLATED COMPOSITE PUBLISHED

RRMS-40054/1 12/16/2014 WEAR-RESISTANT ELECTROPLATED COMPOSITE C PUBLISHED

RRMS-40063 7/19/2016 POWDER, COBALT-NICKEL-CHROMIUM-ALUMINIUM PUBLISHED

RRMS-40065 3/27/2017 MAGNESIA ALUMINA SPINEL POWDER PUBLISHED

RRMS-40066 1/16/2018 POWDER, COBALT-NICKEL-CHROMIUM-ALUMIMUM PUBLISHED

RRMS-40067 2/21/2017 8% YTTRIA-STABILISED ZIRCONIA-HIGH POWDE PUBLISHED

RRMS-40068 3/23/2017 8% YTTRIA-STABILISED ZIRCONIA-HIGH PURTI PUBLISHED

RRMS-40069 1/6/2018 CHROMIUM CARBIDE/NICKEL-CHROME POWDER-CL PUBLISHED

RRMS-40072 A 3/21/2018 CUBIC BORON NITRIDE (CBN) ABRASIVE POWDE PUBLISHED

RRMS-40077 A 3/18/2019 SACRIFICIAL HEAT AND CORROSION RESISTAN PUBLISHED

RRMS-40078 3/27/2018 COMPOSITE ELECTROPLATED CUBIC BORON PUBLISHED

RRMS-40079 3/27/2018 ELECTROPLATED CONICCRAIY COATING PUBLISHED

RRMS-40080 11/26/2018 NICKEL/GRAPHITE (75-25) COMPOSITE POWDER PUBLISHED

RRMS-40081 11/26/2018 THIN SACRIFICIAL HEAT AND CORROSION RES PUBLISHED

RRMS-40082 1/16/2018 TUNGSTEN CARBIDE COBALT POWDER PUBLISHED

RRMS-40083 11/21/2017 ALUMINIUM OXIDE POWDER PUBLISHED

RRMS-40085 6/19/2018 SACRIFICIAL HEAT AND CORROSION RESISTAN PUBLISHED

RRMS-40086 6/19/2018 SACRIFICIAL HEAT AND CORROSION RESISTANT PUBLISHED

RRMS-40088 10/24/2018 POWDER, CONICRAIY + HEXAGONAL BORON PUBLISHED

RRMS-40091 3/27/2018 WIRE, NICKEL 5.5ALUMINIUM 5MOLYBDENUM PUBLISHED

RRMS-40092 6/19/2018 ENVIRONMENTAL COATING SYSTEM APPLIED TO PUBLISHED

RRMS-40093 6/19/2018 Environmental Coating System Applied To PUBLISHED

RRMS-40094 6/19/2018 ENVIRONMENTAL COATING SYSTEM-PLTINUM PUBLISHED

RRMS-40095 6/19/2018 ENVIRONMENTAL COATING SYSTEM-PLATINUM PUBLISHED

RRMS-40104 8/6/2018 Deposited Partially Yttria Stabilised Zi PUBLISHED

RRMS-40105 8/6/2018 Deposited Partially Yttria Stabilised Zi PUBLISHED

RRMS-40106 3/27/2018 COMPOSITE ELECTROPLATED CUBIC BORON PUBLISHED

125

Specification


RRMS-40115 7/12/2019 NICKEL/ALUMINIUM (80/20) COMPOSITE POWDE PUBLISHED

RRMS-40118 8/20/2019 PRIMER, EPOXY, STOVING (SINGLE COMPONENT), CHROMIUM-FREE PUBLISHED

RRMS-40119 10/28/2019 SEAL COATING, EPOXY, HEAT CURED (SINGLE COMPONENT) PUBLISHED

RRMS-41002 B 5/29/2019 SILICON NITRIDE BLANKS FOR ROLLING CONTA PUBLISHED

RRMS-42000 10/19/2012 MODERATE STRENGTH GRAPHITE 100 SHORE HAR PUBLISHED

RRMS-42000/1 10/22/2012 MODERATE STRENGTH GRAPHITE 100 SHORE HARDNESS PUBLISHED

RRMS-43006 10/13/2020 Heat and Flame Resistant Silicone Rubber PUBLISHED

RRMS-43007 10/13/2020 Heat and Flame Resistant Silicone Rubber PUBLISHED

RRMS-44001 C 8/10/2018MOULDING COMPOUND, CHOPPED GLASS FIBRE/BISMALEIMIDE, 180ºC

(350ºF) CONTINUOUS PUBLISHED

RRMS-44001/1 A 9/21/2018MOULDING COMPOUND, CHOPPED E GLASS FIBRE-6mm (0.25

INCH)/BISMALEIMIDE PUBLISHED

RRMS-44002 A 1/4/2011RESIN, EPOXY BASE, FOR RESIN TRANSFER MOULDING 125 DEG C (260 DEG F)

CONTINUOUS PUBLISHED

RRMS-44002/1 1/4/2011Resin, Epoxy Base 1-part, for Resin Transfer Moulding, 140 C (285 F)

Continuous PUBLISHED

RRMS-44002/2 C 3/7/2019 RESIN, EPOXY BASE 2-PART, FOR RESIN TRAN PUBLISHED

RRMS-44003 E 8/12/2020HONEYCOMB, ARAMID BASE, HEXAGONAL CELL SIZE 12.7 mm (0.5 inch) and

GREATER PUBLISHED

RRMS-44004 E 8/13/2019HONEYCOMB, ALUMINUM ALLOY CORROSION INHITED, HEXAGONAL CELL

SIZE 12.7 mm (0.5 inPUBLISHED

RRMS-44005 B 10/6/2010 ADHESIVE, FOAMING, HONEYCOMB CORE SPLICE PUBLISHED

RRMS-44007 D 10/26/2018 Fibre, Carbon Tow PUBLISHED

RRMS-44008 A 11/17/2011 FIBRES, CARBON, TOW AND YARN, TENSILE MO PUBLISHED

RRMS-44009 A 11/17/2011 FIBRES, CARBON, TOW AND YARN, TENSILE MODULUS 231 GPa (33.5 MSI) PUBLISHED

RRMS-44010 A 11/17/2011 FIBRES, CARBON, TOW AND YARN, TENSILE MODULUS 231 GPa (33.5 msi) PUBLISHED

RRMS-44011 A 11/18/2011 FIBRES, CARBON, TOW AND YARN, TENSILE MODULUS 255 GPa (37 msi) PUBLISHED

RRMS-44012 A 11/18/2011 FIBRES, CARBON, TOW AND YARN, TENSILE MODULUS 283 GPa (41 msi) PUBLISHED

RRMS-44013 E 10/26/2018 FABRIC, CARBON FIBRE PUBLISHED

RRMS-44014 A 11/13/2011 FABRIC, CARBON, MANUFACTURED FROM CARBON FIBRE RRMS-44008 PUBLISHED

RRMS-44015 A 11/16/2011 FABRIC, CARBON, MANUFACTURED FROM CARBON FIBRE RRMS44009 PUBLISHED

RRMS-44016 A 11/17/2011 FABRIC, CARBON, MANUFACTURED FROM CARBON FIBRE RRMS 44010 PUBLISHED

126

Specification


RRMS-44018 A 11/17/2011 FABRIC CARBON, MFG FROM CARBON FIBRE RRMS-44012 PUBLISHED

RRMS-44019 B 10/20/2015 PREPREG, CARBON FABRIC/EPOXY, 120ºC (250ºF) CONTINUOUS PUBLISHED

RRMS-44019/1 B 10/20/2015 Prepreg, 6K, 2X2 Twill Carbon Fabric/Epoxy, 120 °C (250 °F) Continuous PUBLISHED

RRMS-44019/2 B 10/20/2015Prepreg, 3K, 5 Harness Satin Carbon Fabric / Epoxy, 120 ?C (250 ?F)

Continuous PUBLISHED

RRMS-44020 A 10/20/2015 PREPREG, GLASS FABRIC/EPOXY, 120°C (250 °F) Continuous PUBLISHED

RRMS-44020/1 B 10/20/2016PREPREG, 8 HARNESS SATIN S-2 GLASS FABRIC/EPOXY, 120°C

(250°F)CONTINUOUS PUBLISHED

RRMS-44022 C 9/18/2020 FABRIC, SILICA, FOR FIRE PROTECTION PUBLISHED

RRMS-44027 B 10/10/2016 BINDER COATED FABRIC PUBLISHED

RRMS-44033 A 1/9/2018 FIRE PROTECTION, INTUMESCENT NON-WOVEN PUBLISHED

RRMS-44038 8/18/2017 Prepreg, UD / SM Carbon Fibre / Epoxy, 0 PUBLISHED

RRMS-44038/1 8/18/2017Prepreg, UD, SM Carbon Fibre/Epoxy, 0.186 mm thickness 180°C cure Hexcel

ComposiPUBLISHED

RRMS-44038/2 8/18/2017Prepreg, UD, SM Carbon Fibre/Epoxy, 0.186 mm thickness 180°C cure Hexcel

ComposiPUBLISHED

RRMS-44039 8/18/2017Prepreg, Woven, 2x2 twill Carbon Fibre / epoxy, 0.210 mm thickness, 180°C

cure PUBLISHED

RRMS-44039/1 8/18/2017Prepreg, Woven, 2x2 twill Carbon Fibre/Epoxy, 0.210 mm thickness 180°C

cure HexcPUBLISHED

RRMS-45001 B 9/26/2019 VOID FILLER, EPOXY BASE, HIGH DENSITY PUBLISHED

RRMS-45002 B 3/9/2016VOID FILLER, ABRADABLE, EPOXY BASE, ULTRA-LOW DENSITY (0.50 G/CC

MAX) PUBLISHED

RRMS-45004 D 3/9/2016 ADHESIVE PASTE, EPOXY BASE PUBLISHED

RRMS-45005 11/17/2009 SURFACING FILM, EPOXY BASE PUBLISHED

RRMS-45006 A 5/13/2016 ADHESIVE FILM, EPOXY BASE PUBLISHED

RRMS-45007 2/17/2015 ADHESIVE FILM, PHENOLIC BASE PUBLISHED

RRMS-45008 A 5/5/2017 UNIVERSAL SEALING COMPOUND FOR JOINTS PUBLISHED

RRMS-45009 10/22/2009 VOID FILLER, EPOXY BASE, MEDIUM DENSITY (0.90 G/CC MAX) PUBLISHED

RRMS-45011 A 3/7/2019 ADHESIVE, FOAMING, HONEYCOMB CORE SPLICE, HIGH PEEL PUBLISHED

RRMS-45012 C 3/7/2019 VOID FILLER, EPOXY BASE, MEDIUM DENSITY (0.75 G/CC MAX) PUBLISHED

RRMS-45013 A 7/27/2017 VOID FILLER, EPOXY BASE, ULTRA-LOW DENSITY (0.35 G/CC MAX) PUBLISHED

127

Specification


RRMS-45014 1/4/2011 ADHESIVE, ANAEROBIC THREADLOCK PUBLISHED

RRMS-45015 B 3/7/2019 ADHESIVE, RETAINING PUBLISHED

RRMS-45016 C 9/21/2016 ADHESIVE, FOAMING, HONEYCOMB CORE SPLICE PUBLISHED

RRMS-45018 A 6/16/2015 TACKIFIER FILM, EPOXY BASE PUBLISHED

RRMS-46002 9/20/2019 PROCESSED SYNTHETIC GAS TURBINE LUBRICANTS PUBLISHED

RRMS-46003 8/20/2019 Compressor Cleaning Fluids PUBLISHED

RRMS-47001 10/22/2009 LABEL, SELF-ADHESIVE WITH PROTECTIVE COVER PUBLISHED

RRMS-48000 6/20/2017 ADHESIVE TRANSFER TAPE, ACRYLIC PUBLISHED

RRMS-48001 10/10/2017 ADHESIVE, ANAEROBIC THREADLOCK PUBLISHED

RRMS-48002 10/10/2017 ADHESIVE RETAINING PUBLISHED

RRMS-48003 5/21/2018 RESIN, EPOXY, FOR RESIN TRANSFER MOULDIN PUBLISHED

RRMS-48004 5/21/2018 HARDENER, AMINE, FOR RESIN TRANSFER MOUL PUBLISHED

RRMS-49000 7/6/2017 QUENCHING FLUIDS PUBLISHED

RRMS-49001 9/20/2016 COMPRESSED AND LIQUID GAS SUPPLIES PUBLISHED

RRMS-49002 6/26/2017 MARKING MATERIALS FOR TEMPORARY IDENTIFI PUBLISHED

RRMS-49003 A 3/12/2018 RESIN, EPOXY, FOR RESIN TRANSFER MOULD PUBLISHED

RRMS-49004 A 3/12/2018 HARDENER, AMINE, FOR RESIN TRANSFER PUBLISHED

RRMS-49006 5/31/2018 PLASTIC FILM. POLYVINYL FLUORIDE PUBLISHED

RRMS-49008 8/20/2019 COMPRESSOR CLEANING FLUIDS PUBLISHED

RRP-50000 G 7/2/2020 TECHNICAL CONTROL OF SPECIAL PROCESSES PUBLISHED

RRP-50007 7/9/2008 PROCESSING REQ FOR CORROSION-RESISTANT PUBLISHED

RRP-51000 F 6/11/2019 GENERAL CLEANING AND DEGREASING PUBLISHED

RRP-51001 E 3/7/2019 ETCHING OF TITANIUM ALLOYS PUBLISHED

RRP-51002 D 3/7/2019ETCHING OF NICKEL BASE AND STEEL ALLOY COMPONENTS FOR

METALLURGICAL INSPECTION APUBLISHED

RRP-51003 A 1/20/2015ETCH INSPECTION FOR DETECTING GRINDING DEFECTS ON HARDENED STEEL

PARTS PUBLISHED

RRP-51005 A 7/19/2016 REMOVAL OF THERMAL SPRAY COATING PUBLISHED

RRP-51006 B 3/18/2019 APPLICATION OF SACRIFICIAL ALLUMINIUM COATINGS PUBLISHED

RRP-51007 1/7/2009 APPLICATION OF ANTIFRET/DRY FILM LUBRICANT COATINGS PUBLISHED

RRP-51008 A 1/26/2012 ETCHING OF ALUMINIUM ALLOYS PUBLISHED

RRP-51009 B 6/17/2014 CHEMICAL REMOVAL AND INSPECTION OF WHITEION OF WHITE LAYER PUBLISHED

128

Specification


RRP-51010 D 1/17/2017 ELECTROCHEMICAL ETCH MARKING PUBLISHED

RRP-51011 A 6/19/2018 APPLICATION OF ORGANIC COATING PUBLISHED

RRP-51016 A 7/19/2016 REMOVAL OF ALUMINIDE AND PLATINUM DIFFUSION COATINGS PUBLISHED

RRP-51017 A 7/19/2016Removal of Electron Beam Physical Vapour Deposition Thermal Barrier

Coatings PUBLISHED

RRP-51019 1/20/2012 Anodic Treatment of Titanium Alloys PUBLISHED

RRP-51022 7/3/2019 CHEMICAL CONVERSION TREATMENT FOR MAGNESIUM ALLOYS PUBLISHED

RRP-51023 B 7/31/2020 Application of Composite Electroplated A PUBLISHED

RRP-51024 5/3/2017 SUPERCLEANING OF PARTS WITH A POTENTIAL PUBLISHED

RRP-51025 7/6/2017 DESCALING PUBLISHED

RRP-51027 7/26/2017 CLEANING PROCEDURES ASSOCIATED WITH HIGH PUBLISHED

RRP-51029 A 7/22/2019 LHE-ZINC-NICKEL ALLOY ELECTROPLATING PUBLISHED

RRP-51032 8/20/2019 SULPHURIC ACID ANODISING OF ALUMINIUM AND ALUMINIUM ALLOYS PUBLISHED

RRP-51033 8/20/2019 CHEMICAL CONVERSION TREATMENT FOR ALUMINUM PUBLISHED

RRP-51034 8/20/2019CHROMIC ACID ANODISING OF ALUMINUM AND A CHROMIC ACID

ANODISING OF ALUMINUM AND PUBLISHED

RRP-52000 12/16/2008 PLASMA SPRY COATING DEPOSITION PUBLISHED

RRP-52001 10/30/2008 HIGH VELOCITY OXY-FUEL (HVOF) SPRAY COATING DEPOSITION PUBLISHED

RRP-52002 11/20/2009 Diffused Aluminide Coating Deposition PUBLISHED

RRP-52003 A 7/12/2012 PLATINUM ALUMINIDE DIFFUSION COATING - GAS PHASE/PACK PUBLISHED

RRP-52004 10/30/2008ALUMINIDE COATING, ELECTROPHORETIC DEPOSITION OR SLURRY


RRP-52005 B 7/1/2020 PART MARKING APPLICATION-LABELS AND DECA PUBLISHED

RRP-52006 A 10/21/2014COATING, THERMAL BARRIER, ELECTRON BEAM PHYSICAL VAPOR

DEPOSITION (PVD) PUBLISHED

RRP-52010 A 7/15/2014 FLAME SPRAY COATING DEPOSITION PUBLISHED

RRP-52011 6/12/2009 APPLICATION OF PLATINUM BY ELECTROPLATING PUBLISHED

RRP-52012 3/11/2010 LOW PRESSURE PLASMA SPRAY (LPPS) COATING DEPOSITION PUBLISHED

RRP-52013 9/23/2011 ION ASSISTED PHYSICAL VAPOUR DEPOSITION OF COATINGS PUBLISHED

RRP-52016 9/16/2014 MANFACTURING OF 3D STRUCTURED SURFACE PUBLISHED

RRP-52017 3/8/2013 Application of Release Coating RRMS 40048 PUBLISHED

RRP-52018 3/23/2017 ALUMINIDE COATING CONTAINING CHROMIUM AN PUBLISHED

129

Specification


RRP-52019 A 3/27/2018 THERMAL SPRAY COATING DEPOSTION PUBLISHED

RRP-53000 B 10/18/2017 COMPRESSION MOULDING PUBLISHED

RRP-53001 C 10/25/2016 ADHESIVE BONDING AND APPLICATION OF VOID FILLER PUBLISHED

RRP-53002 B 10/11/2017 RESIN TRANSFER MOULDING PUBLISHED

RRP-53003 B 6/30/2017 VACUUM BAG MOULDING PUBLISHED

RRP-53004 B 7/27/2017 VOID FILLER AND SEALANT PUBLISHED

RRP-53005 A 3/7/2019 FILAMENT WINDING, DRY TOW PUBLISHED

RRP-53007 A 3/30/2017 APPLICATION OF SEALING COMPOUND RRMS45008 PUBLISHED

RRP-53015 2/17/2015 AUTOMATED DEPOSITION OF UNIDIRECTIONAL COMPOSITES PUBLISHED

RRP-53016 B 6/11/2020 INSTALLATION OF SURFACE BONDED FASTENERS PUBLISHED

RRP-53017 3/1/2019Manufacture and Processing of Oxide-Oxide Based Ceramic Matrix

Composites PUBLISHED

RRP-54000 H 9/4/2020 CONTROL OF THERMAL PROCESING EQUIPMENT PUBLISHED

RRP-54001 E 4/8/2019 HOT ISOSTATIC PRESSING PUBLISHED

RRP-54003 G 11/14/2019 HEAT TREATMENT OF FABRICATION IN and Cobalt Alloy Parts PUBLISHED

RRP-54004 D 7/17/2018 HEAT TREATMENT OF PRECIPITATION-HARDENABLE CRES PUBLISHED

RRP-54005 D 10/10/2017 GAS AND ION (PLASMA) NITRIDING OF STEEL COMPONENTS PUBLISHED

RRP-54006 D 10/10/2017 GAS AND VACUUM CARBURIZING OF STEEL PART PUBLISHED

RRP-54010 E 3/6/2020 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOY PARTS PUBLISHED

RRP-54015 7/15/2014 P0WDER SINTER CONTROL PUBLISHED

RRP-54017 6/26/2017 SOLUTION HEAT TREATMENT OF COMPONENTS MA PUBLISHED

RRP-54020 11/10/2020 Heating of Components for Assembly and D PUBLISHED

RRP-55000 A 6/28/2019 NONCONVENTIONAL MACHINING PUBLISHED

RRP-55003 11/19/2013AUTOMATED DRESSING, POLISHING, LINISHING AND DEBURRING OF

CLASSIFIED COMPONENTS PUBLISHED

RRP-56000 B 4/26/2018 CONTROLLED SHOT PEENING PUBLISHED

RRP-56001 A 6/12/2019 ABRASIVE BLASTING PUBLISHED

RRP-56002 B 11/6/2018 LASER PEENING PUBLISHED

RRP-56003 B 12/18/2019 SPLIT SLEEVE COLD EXPANSION PUBLISHED

RRP-56004 D 6/30/2020 SUPER POLISHING AND SUPER FINISHING PUBLISHED

RRP-56005 6/17/2014 COLD ROLLING TO IMPART SUBSURFACE COMPRESSOVE STRESS PUBLISHED

RRP-56006 12/19/2017 ABRASIVE BLASTING AS A PREPARATION FOR PUBLISHED

130

Specification


RRP-57001 A 1/6/2010 FUSION WELDING PUBLISHED

RRP-57002 A 10/21/2013 ELECTRON BEAM WELDING PUBLISHED

RRP-57003 A 3/29/2019 PROCESS AND CONTROL OF BULK-POUR BICAST HARDWARE PUBLISHED

RRP-57004 A 12/5/2019 MECHANIZED GAS TUNGSTEN ARC WELDING (GTAW) FOR TUBING PUBLISHED

RRP-57005 10/14/2008 RESISTANCE WELDING PUBLISHED

RRP-57008 10/22/2008 INERTIA WELDING PUBLISHED

RRP-57009 A 10/4/2018 LASER BEAM WELDING PUBLISHED

RRP-57010 A 11/23/2011 PROCESS AND CONTROL OF FURNACE BRAZING PUBLISHED

RRP-57011 A 4/26/2011 TORCH AND INDUCTION BRAZING PUBLISHED

RRP-57012 1/26/2009 HOT RIVETING AND UPSET JOINING PUBLISHED

RRP-57017 2/6/2019 QUALIFICATION OF WELDING OPERATORS AND MANUAL WELDERS PUBLISHED

RRP-57018 3/29/2019PROCESS AND CONTROL OF FURNACE BRAZING USING THE CASTBOND

PROCESS PUBLISHED

RRP-58000 E 7/22/2019 TECHNICAL CONTROL OF NONDESTRUCTIVE TESTING PUBLISHED

RRP-58001 C 5/22/2019 ULTRASONIC IMMERSION INSPECTION OF RECTIINEAR MACHINED FORMS PUBLISHED

RRP-58002 B 10/11/2012ULTRASONIC EXAM OF BILLET AND BAR MATERIAL FOR SUB-SURFACE

DEFECTS PUBLISHED

RRP-58003 J 6/11/2019 NON-DESTRUCTIVE TESTIN2-FLUORESCENT PENETRANT INSPECTION PUBLISHED

RRP-58004 G 1/4/2019 MAGNETIC PARTICLE INSPECTION PUBLISHED

RRP-58005 D 11/23/2020 TRAINING AND APPROVAL OF NON-DESTRUCTIVE TESTING (NDT) PERSONNEL PUBLISHED

RRP-58006 F 10/16/2019 RADIOGRAPHIC INSPECTION PUBLISHED

RRP-58007 B 11/15/2016 VISUAL INSPECTION PUBLISHED

RRP-58008 D 2/21/2018METHODOLOGY FOR CONSTRUCTION OF ULTRASONIC INSPECTION SCAN

PLANS AND ULTRASONIC PUBLISHED

RRP-58009 D 10/24/2018 DIGITAL RADIOGRAPHIC INSPECTION PUBLISHED

RRP-58010 A 11/25/2013 EDDY CURRENT INSPECTION PUBLISHED

RRP-58011 B 6/10/2019 FLASH THEMOGRAPHY PUBLISHED

RRP-58012 1/9/2014Non-Destructive Testing for Land Based and Marine Power Turbines and

Related EquPUBLISHED

RRP-58013 11/19/2013 INSPECTION OF OPEN FACED HONEYCOMB SEAL ASSEMBLIES PUBLISHED

131

Specification


RRP-58014 C 6/10/2019 TRAINING AND APPROVAL OF ETCH INSPECTION PUBLISHED

RRP-58015 A 2/21/2017 GENERAL ULTRASONIC IMMERSION INSPECTION PUBLISHED

RRP-58017 10/25/2016 ULTRASONIC INSPECTION-GENERAL PUBLISHED

RRP-58018 11/17/2015 NDT OF CERAMIC ROLLING ELEMENTS FOR BEAR PUBLISHED

RRP-58019 7/19/2016 RADIOGRAPHIC INSPECTION-COMPUTED TOMOGRAPHY (CT) PUBLISHED

RRP-58020 7/6/2017 ULTRASONIC INSPECTION-SHEAR WAVE PUBLISHED

RRP-58022 12/18/2019 Ultrasonic Inspection of Organic Composi PUBLISHED

RRP-58023 12/12/2019 Assessment of Surface Features using Rubber Replicating Media PUBLISHED

RRP-59000 6/8/2007 CHIP FORMING MACHINING OF CLASSIFIED PAR PUBLISHED

RRP-59001 F 9/4/2020 PROCESSING OF TITANIUM ALLOYS & ASSOC HARDWARE PUBLISHED

RRP-59003 9/22/2008 INK MARKING, METALLIC COMPONENTS PUBLISHED

RRP-59004 B 4/30/2019 LASER PART MARKINGS PUBLISHED

RRP-59005 B 9/20/2016HANDLING, CLEANING, PRESERVING AND PACKAGING OF ROLLING ELEMENT

BEARINGS PUBLISHED

RRP-59006 A 10/19/2017 PROCESING OF CARBON AND LOW ALLY STEEL PUBLISHED

RRP-59007 C 10/23/2017PROCESING REQUIREMENTS FOR CORROSION-RESISTANT HIGH

TEMPERATURE ALLOY DISKS AND PUBLISHED

RRP-59010 A 3/28/2017 SUPERPLASTIC FORMING PUBLISHED

RRP-59011 A 3/16/2010 PROCESSING OF NON-CORRUGATED RIGID PIPES PUBLISHED

RRP-59016 D 9/3/2019CLEANLINESS VERIFICATION OF PARTS WITH POTENTIAL TO CONTAMINATE

THE OIL SYSTEM PUBLISHED

RRP-59021 10/16/2019 Broach Tooling Re-Conditioning PUBLISHED

RRP-732006 5/22/2019 METALLURGIAL STANDARDS FOR RRMS 32006 PUBLISHED

RRP-740004 3/7/2019QUALITY REQUIREMENTS FOR CHEMICAL CONVERSION TREATED

MAGNESIUM ALLOYS PUBLISHED

RRP-756001 6/17/2014QUALITY REQUIREMENTS FOR COLD ROLLING TO IMPART SUBSURFACE

COMPRESSIVE STRESS PUBLISHED

RRQ-731000 12/4/2008 QUALITY REQUIREMENTS FOR ROLLING ELEMENT BEARINGS PUBLISHED

RRQ-731001 3/20/2012MICROSTRUCTURAL REQUIREMENTS FOR STEEL BEARING MATERIALS IN

ROLLING CONTACT APPLPUBLISHED

RRQ-731014 4/21/2016 METALLURGICAL STANDARDS FOR 4NI-1.2CR PUBLISHED

RRQ-731015 3/20/2017 METALLURGICAL STANDARDS FOR FE-CR4.25MO- PUBLISHED

132

Specification


RRQ-731016 3/20/2017 METALLURGICAL STANDARDS FOR FE-4.1CR-3.4NI-4.2MO-1.2V STEEL PUBLISHED

RRQ-731017 5/2/2017 METALLURGICAL STANDARDS FOR FE-10W-3CR S PUBLISHED

RRQ-731018 3/20/2017 METALLURGICAL STANDARDS FOR FE-3CR-0.6Mo PUBLISHED

RRQ-732006 5/22/2019 Metallurgical Standards for RRMS 32006 PUBLISHED

RRQ-732009 1/2/2017 METALLURGICAL STANDARDS FOR 12CR PUBLISHED

RRQ-732014 A 4/17/2018 MACROSTRUCTURAL AND MICROSTRUCTAL REQUIR PUBLISHED

RRQ-733008 7/13/2017 METALLURGICAL STANDARDS FOR NI--185CO-15 PUBLISHED

RRQ-733015 11/21/2017 METALLURGICAL STANDARDS FOR NI PUBLISHED

RRQ-733016 5/16/2017 METALLURGICAL STANDARDS FOR RRMS 33016 PUBLISHED

RRQ-733017 8/11/2016 METTALLURGICAL STANDARDS FOR RRMS33017 PUBLISHED

RRQ-733023 3/27/2017 METTALURGICAL STANDARDS FOR RRMS 33023 PUBLISHED

RRQ-733027 5/2/2017 METALLURGICAL STANDARDS FOR RRMS 33027 PUBLISHED

RRQ-733033 1/2/2017 METTALLURGICAL STANDARDS FOR RRMS33033 PUBLISHED

RRQ-733039 A 9/12/2019METALLURGICAL STANDARDS FOR RRMS 3039 (AS SINTERED STATE)+ DRRMS

33039/1 (AS SINPUBLISHED

RRQ-733058 10/15/2018 METALLURGICAL INSPECTION STANDARD FOR PUBLISHED

RRQ-733145 2/4/2019METALLURGICAL STANDARDS FOR XWB-84 HPC1-3 BLISK AEROFOIL REPAIR

BY LASER BLOWN PPUBLISHED

RRQ-736000 3/5/2017 METALLURGICAL STANDARDS FOR TI-6AI-4V PUBLISHED

RRQ-736001 B 9/7/2018 METLLURGICAL STANDARDS FOR TI-6A1-2SN PUBLISHED

RRQ-736005 3/30/2017 METALLURGICAL STANDARDS FOR TI-6.0AI-4.0 PUBLISHED

RRQ-736006 6/19/2018 Metallurgical Standards for Ti-6Al-4V Cr PUBLISHED

RRQ-736017 1/2/2017 METALLURGICAL STANDARDS FOR TI-6.0 AI PUBLISHED

RRQ-736019 10/18/2017 METALLURGICAL STANDARDS FOR TI-6.0 AI PUBLISHED

RRQ-736021 3/27/2018 Metallurgical Standards for Titanium Alu PUBLISHED

RRQ-736022 1/2/2018 METALLURGICAL STANDARDS FOR TI-0.85AI- PUBLISHED

RRQ-736034 7/13/2017 METALLURGICAL STANDARDS FOR TI-6.0AI-4.0 PUBLISHED

RRQ-736035 10/19/2017 METALLURGICAL STANDARDS FOR TI PUBLISHED

RRQ-736036 8/29/2019 METALLURGICAL STANDARDS FOR TI-5.6AI-4SN-3.6ZR-0.7NB-0.5MO-0.05C PUBLISHED

RRQ-737000 A 7/20/2012INSPECTION REQUIREMENTS AND ACCEPTANCE STANDARDS GENERAL:NON-

FERROMAGNETIC. WROUPUBLISHED

133

Specification


RRQ-737002 A 4/15/2014 ACCEPTANCE STANDARDS: FERROMAGNETIC WROUGHT PRODUCTS PUBLISHED

RRQ-737003 10/16/2018 Inspection Requirements and Acceptance S PUBLISHED

RRQ-740000 9/16/2014 QUALITY REQUIREMENTS FOR 3D STRUCTURED PUBLISHED

RRQ-740001 A 10/19/2018 QUALITY REQUIREMENTS FOR COMPOSITE PUBLISHED

RRQ-740003 A 1/15/2019 VISUAL REQUIREMENTS FOR SURFACE TREATMEN PUBLISHED

RRQ-740004 3/7/2019QUALITY REQUIREMENTS FOR CHEMICAL CONVERSION TREATED

MAGNESIUM ALLOYS PUBLISHED

RRQ-740005 1/16/2018 QUALITY REQUIRMENTS FOR RRMS 40005 APPLI PUBLISHED

RRQ-740007 11/21/2017 QUALITY REQUIREMENTS FOR COMPOSITE ELEC PUBLISHED

RRQ-740013 A 3/20/2019 QUALITY REQUIREMENTS FOR COMPOSITE ELECT PUBLISHED

RRQ-740014 6/7/2017 QUALITY REQUIREMENTS FOR RRMS 40032 APPL PUBLISHED

RRQ-740016 5/2/2017 QUALITY REQUIREMENTS FOR RRMS 40029 BY P PUBLISHED

RRQ-740017 11/21/2017 QUALITY REQUIREMENTS FOR RRMS 40014 BY PUBLISHED

RRQ-740018 6/7/2017 QUALITY REQUIREMENTS FOR RRMS 40037 BY P PUBLISHED


RRQ-740020 10/18/2018 QUALITY REQUIREMENTS FOR RRMS 40080 PUBLISHED





RRQ-740026 2/20/2018 Quality Requirements for RRMS 40019 appl PUBLISHED




RRQ-740030 11/21/2017 QUALITY REQUIREMENTS FOR RRMS 40043 APP PUBLISHED



RRQ-740034 1/16/2018 QUALITY REQUIRMENTS FOR RRMS 40082 APPL PUBLISHED




RRQ-740039 12/19/2017 Turbine Blade Fin Tip Coatings for RRMS PUBLISHED

134

Specification


RRQ-740040 11/21/2017 QUALITY REQUIREMENTS FOR RRMS 40069 APP PUBLISHED


RRQ-740043 7/24/2020Thermal Barrier Coating System Applied to Turbine Nozzle Guide Vanes #

Diffused PUBLISHED

RRQ-740049 11/26/2019Quality Requirements for Overlay Bond Coats for Thermal Barrier Coatings

AppliedPUBLISHED



RRQ-740056 3/23/2017 QUALITY REQUIREMENTS FOR ALUMINIDE COATI PUBLISHED

RRQ-740057 A 7/21/2020 QUALITY REQUIREMENTS FOR TBT406 PUBLISHED

RRQ-740058 A 3/20/2019 QUALITY REQUIREMENTS FOR ATA3C PUBLISHED

RRQ-740059 A 43431 QUALITY REQUIREMENTS FOR RRMS 40014 BY PUBLISHED

RRQ-740061 43186 Engineering Coating Standard RRMS 40091 PUBLISHED

RRQ-745000 3/12/2013 ACCEPTANCE STANDARDS FOR APPLICATION OF SEALING COMPOUND RRMS45008 PUBLISHED

RRQ-745001 3/2/2017 JOINTING COMPOUND, APPLICATION PUBLISHED

RRQ-752000 3/12/2010INSPECTION AND ACCEPTANCE CRITERIA FOR THERMAL BARRIER COATINGS APPLIED

BY ELECTPUBLISHED

RRQ-752001 5/19/2010 Quality Requirements for Bond Coatings / Thermal Barrier Coatings PUBLISHED

RRQ-752002 7/12/2012 QUALITY REQUIREMENTS FOR PLATINUM ALUMINIDE DIFFUSION COATINGS PUBLISHED

RRQ-752003 1/23/2013 QUALITY REQUIREMENTS FOR ALUMINIDE DIFFUSION COATINS PUBLISHED

RRQ-752004 A 10/17/2019 QUALITY REQUIREMENTS FOR ABRADABLE COATINGS (INACTIVE FOR NEW DESIGN) PUBLISHED

RRQ-752004/1 10/6/2011QUALITY REQUIREMENTS FOR RRMS 40044 ALUMINIUM BRONZE/POLYESTER

ABRADABLE COATINGPUBLISHED

RRQ-752004/2 10/19/2012 Quality Requirements for RRMS 40021 Aluminium - Silicon Boron Nitride - Polyeste PUBLISHED

RRQ-752004/3 1/23/2013QUALITY REQUIREMENTS FOR RRMS-40022 95 NICKEL-5 ALUMINIUM COATINGS AS

BOND LAYERPUBLISHED

RRQ-752005 5/7/2012 QUALITY REQUIREMENTS FOR THERMALLY SPRAYED WEAR-RESISTANT COATING PUBLISHED

RRQ-752006 9/20/2011INSPECTION AND ACCEPTANCE CRITERIA FOR NiCoCrAIY COATINGS APPLIED BY ION

ASSISTEPUBLISHED

RRQ-752012 11/30/2015 THERMAL BARRIER COATING SYSTEM PUBLISHED

RRQ-752014 2/21/2018 Abradable Coatings PUBLISHED

RRQ-752015 3/27/2017 QUALITY STANDARDS FOR GENERAL THERMAL SP PUBLISHED

RRQ-752016 A 4/1/2019 QUALITY REQUIREMENTS FOR PLATING PUBLISHED

135

Specification


RRQ-752017 3/27/2017 QUALITY REQUIREMENTS FOR ORGANIC PAINTS PUBLISHED

RRQ-752018 12/19/2017 QUALITY REQUIRMENTS FOR SACRIFICIAL HEAT PUBLISHED

RRQ-752019 A 4/9/2019 QUALITY REQUIREMENTS FOR CORROSION PROTE PUBLISHED

RRQ-752021 B 3/18/2019 QUALITY REQUIREMENTS FOR ELECTROPLATED PUBLISHED

RRQ-752025 5/16/2017 QUALITY REQUIREMENTS FOR DETONATION FLAM PUBLISHED

RRQ-752026 5/2/2017 QUALITY STANDARDS FOR PLASMA SPRAYED PUBLISHED

RRQ-752027 5/2/2017 QUALITY REQUIREMENTS FOR TURBINE BLADE T PUBLISHED

RRQ-752029 11/21/2017 QUALITY REQUIREMENTS FOR METALLIC OVERLY PUBLISHED

RRQ-752030 11/21/2017 QUALITY REQUIREMENTS FOR FILLED AND PUBLISHED

RRQ-753003 A 11/14/2019 CONTINUOUS FIBRE REINFORCED POLYMER COMPOSITES PUBLISHED

RRQ-753004 11/18/2014 INJECTTION MOULDINGS, FIBER REINFORCED PUBLISHED

RRQ-753005 10/21/2014 COMPRESSION MOULDINGS, THERMOSETTING PUBLISHED

RRQ-753006 8/18/2017 ACCEPTANCE CRITERIA FOR FIRE PROTECTION LAYER PUBLISHED

RRQ-755000 2/1/2010 ACCEPTANCE CRITERIA FOR NON-CONVENTIONAL MACHINING PUBLISHED

RRQ-756001 6/17/2014QUALITY REQUIREMENTS FOR COLD ROLLING TO IMPACT SUBSURFACE COMPRESSIVE

STRESS PUBLISHED

RRQ-757000 B 1/31/2019 INSPECTION AND ACCEPTANCE CRITERIA FOR ARC WELDING PUBLISHED

RRQ-757001 1/5/2012 INSPECTION AND ACCEPTANCE CRITERIA FOR BRAZING PUBLISHED

RRQ-757002 5/21/2013 ELECTRON AND LASER BEAM WELDING PUBLISHED

RRQ-757003 A 7/20/2020 Inspection and Acceptance Criteria for Arc Welding-For Legacy Applications Only PUBLISHED

RRQ-757004 A 10/18/2019 FUSION WELDING-ACCETANCE CRITERIA FOR LEGACY REQUIREMENTS PUBLISHED

** End of Report **

136

Documents

ROLLS-ROYCE ENGINEERING SPECIFICATION INDEX