Rolls-Royce Corporation AE 3007A Service Bulletin

(SB) Technical Publications Index

May 1, 2015

Recommended. You should do this bulletin before the next flight.1

Recommended. You should do this bulletin when you receive it, and every XX flight hours until further notice.2(a)

Recommended. You should do this bulletin within XX flight hours after you receive it.2(b)

Recommended. You should do this bulletin every XX flight hours.2(c)

Recommended. You should do this bulletin within XX calendar days after you receive it.2(d)

Recommended. After the parts are available, you should do this bulletin the next time you do any maintenance on the engine.3

Recommended. After the parts are available, you should do this bulletin the next time the engine goes to an authorized maintenance facility that can do the work.

4

Recommended. You should do this bulletin when the engine is disassembled to do maintenance. You do not need to disassemble the engine more than required for the scheduled or unscheduled maintenance. You can use any approved replacement part when you reassemble the engine.

5(a)

Recommended. You should do this bulletin when the engine is disassembled to do maintenance. You do not need to disassemble the engine more than required for the scheduled or unscheduled maintenance. The parts that you use when you reassemble the engine must meet the requirements of this bulletin.

5(b)

Deleted (see 5a or 5b).6

This bulletin is optional.7

Other/Custom.8

Fleet Incorporation.F

AE SERIES PROPULSION SYSTEMService Bulletin Index

COMPLIANCE CATEGORIES AND DEFINITIONS

Compliance DefinitionCategory

01-May-15Page 1 of 1

Section 3

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-001 Superceded by AE 3007A-72-0671 16-Jul-99AE

3007A-72-002 Cancelled Prior to PublicationAE

3007A-72-003 Cancelled Prior to PublicationAE

3007A-72-004 Cancelled Prior to PublicationAE

3007A-72-005 Engine - New Forward Ground-Handling Bracket

1 2(c) 72-00-73-0114-Apr-97AE 7A

3007A-72-006 Engine - New Borescope Plugs for the 3rd- and 5th-Stage Compressor Variable Vanes

5 7 72-37-00-0117-Jul-06AE 7A

3007A-72-007 Cancelled Prior to PublicationAE

3007A-72-008 Cancelled Prior to PublicationAE

3007A-72-009 Superceded by AE 3007A-72-0371 31-Oct-97AE

3007A-72-010 Cancelled Prior to PublicationAE

3007A-72-011 Engine - New Low-Pressure-Turbine Forward Shaft

3 7 72-58-00-0129-Mar-10AE 7A, 7A1/1, 7A1/3, 7A1

3007A-72-012 Engine - Seal Break-In Procedure1 8 7225-Jun-97AE 7A

3007A-72-013 Cancelled Prior to PublicationAE

3007A-72-014 Engine - New 1st-Stage Low-Pressure-Turbine Vane Ring

2 7 72-57-00-0515-Jun-00AE 7A

3007A-72-015 Superceded by AE 3007A-72-1911 11-Dec-00AE

01-May-15Page 1 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-016 Engine - Rework The LP Turbine Case Assembly

1 5(b) 72-57-00-0116-Mar-01AE 7A

3007A-72-017 Engine - Front Sump Housing 5(b) 72-25-00-0112-Nov-97AE 7A

3007A-72-018 Engine - Aluminum Actuator Ring Clevis1 7 72-25-00-0531-Mar-98AE 7A

3007A-72-019 Engine - New 1st-Stage Compressor Wheel Assembly

2 7 72-37-00-0112-Sep-05AE 7A

3007A-72-020 Engine - Inspect for Cracks in the Compressor Diffuser

4 8 72-39-00-0108-Jun-01AE 7A

3007A-72-021 Cancelled Prior to PublicationAE

3007A-72-022 Engine - New Center-Sump Housing Assembly and Center-Sump Forward Stationary Seal

5(b) 72-39-00-0130-May-97AE 7A

3007A-72-023 Engine - Chem-Milled Diffuser6 4 72-39-00-0115-Dec-03AE 7A

3007A-72-024 Superceded by AE 3007A-72-1041 21-Sep-98AE

3007A-72-025 Engine - Fan Spanner Nut Lock Plug2 5(b) 72-00-21-0531-Oct-03AE 7A

3007A-72-026 Engine - Fan Drive Shaft Serial Number Verification

5(b) 72-00-21-0105-Mar-99AE 7A

3007A-72-027 Engine - Replace the Shroud in the Accessory Drive Gearbox

5(b) 72-63-00-0112-Feb-98AE 7A

3007A-72-028 Cancelled Prior to PublicationAE

01-May-15Page 2 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-029 Superceded by AE 3007A-72-0371 31-Oct-97AE

3007A-72-030 Engine - Rework the Compressor-to-Turbine Shaft

4 4 72-35-00-0109-Feb-04AE 7A

3007A-72-031 Engine - New Compressor-to-Turbine Shaft and Liner with Locking Spiral Retaining Ring

1 7 72-35-00-0121-Sep-98AE 7A

3007A-72-032 Cancelled Prior to PublicationAE

3007A-72-033 Cancelled Prior to PublicationAE

3007A-72-034 See AE 3007A-A-72-034AE

3007A-72-035 Engine - New Mid-Span Roller Bearing2 5(b) 72-00-63-0128-Apr-08AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-036 Engine - Rework the Fan Drive Shaft 7 72-00-2118-Mar-02AE 7A, 7A1/1

3007A-72-037 Superceded by AE 3007A-72-052 and AE 3007A-72-064

1 01-May-98AE

3007A-72-038 Engine - New 3rd-Stage Low Pressure Turbine Bladed Wheel Assembly

1 7 72-58-00-1531-Aug-99AE 7A

3007A-72-039 Superceded by AE 3007A-72-0501 21-Sep-98AE

3007A-72-040 Engine - IGV and 1st- thru 5th-Stage Actuation Ring and Button Assemblies

4 72-25-00-0504-Nov-97AE 7A

01-May-15Page 3 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-041 Engine - 1st- thru 5th-Stage Compressor Inner-Ring Segment End Gap

3 4 72-37-00-0104-Feb-99AE 7A

3007A-72-042 Superceded by AE 3007A-72-0971 13-Aug-98AE

3007A-72-043 Cancelled Prior to PublicationAE

3007A-72-044 See AE 3007A-A-72-044AE

3007A-72-045 Engine - Replace the Accessory-Drive Gearbox

2 4 72-63-00-0103-Feb-98AE 7A

3007A-72-046 Engine - Cover Plate Gasket on the Diffuser2 3 72-39-00-1008-Jun-01AE 7A

3007A-72-047 Cancelled Prior to PublicationAE

3007A-72-048 Superceded by AE 3007A-72-1182 03-Dec-98AE

3007A-72-049 Cancelled Prior to PublicationAE

3007A-72-050 Engine - New 1st-Stage High Pressure Turbine Blade Tracks and Seal Strips

2 5(a) 72-51-00-0519-Jan-99AE 7A

3007A-72-051 Engine - Rework the Accessory Drive Gearbox - Add Vent Tube Fitting

3 4 72-63-00-0105-Aug-02AE 7A

3007A-72-052 Superceded by AE 3007A-72-1822 01-Sep-00AE

3007A-72-053 Cancelled Prior to PublicationAE

3007A-72-054 Superceded by AE 3007A-72-0672 16-Jul-99AE

3007A-72-055 Engine - Replace the Split-Inner-Race Ball Bearing

1 4 72-39-00-0121-Dec-98AE 7A

01-May-15Page 4 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-056 Cancelled Prior to PublicationAE

3007A-72-057 Cancelled Prior to PublicationAE

3007A-72-058 See AE 3007A-A-72-058AE

3007A-72-059 Superceded by AE 3007A-72-1261 19-Feb-01AE

3007A-72-060 Cancelled Prior to PublicationAE

3007A-72-061 Cancelled Prior to PublicationAE

3007A-72-062 Superceded by AE 3007A-72-1542 21-Oct-99AE

3007A-72-063 Engine - Low-Pressure-Turbine Module (23064286) to (23067850) - Rework

5 7 72-00-57-0103-Feb-03AE 7A

3007A-72-064 Engine - No. 6 Carbon Seal Assembly with Steel Sleeve

2 5(b) 72-39-00-0116-Mar-01AE 7A, 7A1/1

3007A-72-065 Engine - New Compressor Vane Assembly Nuts

5(b) 72-00-25-0511-Dec-98AE 7A, 7A1/1

3007A-72-066 Superceded by AE 3007A-72-1091 16-Mar-01AE

3007A-72-067 Engine - New 1st-Stage High-Pressure Turbine Blades

1 7 72-52-00-0529-Mar-00AE 7A

3007A-72-068 Superceded by AE 3007A-A-72-1561 04-Apr-00AE

3007A-72-069 Cancelled Prior to PublicationAE

3007A-72-070 Superceded by AE 3007A-72-0721 17-Jun-98AE

01-May-15Page 5 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-071 Cancelled Prior to PublicationAE

3007A-72-072 Superceded by AE 3007A-72-3214 4 72-63-00-0124-Feb-14AE 7A, 7A1/1, 7A1

3007A-72-073 Cancelled Prior to PublicationAE

3007A-72-074 Cancelled Prior to PublicationAE

3007A-72-075 Cancelled Prior to PublicationAE

3007A-72-076 Superceded by AE 3007A-72-1351 15-Jun-00AE

3007A-72-077 Cancelled Prior to PublicationAE

3007A-72-078 Cancelled Prior to PublicationAE

3007A-72-079 Cancelled Prior to PublicationAE

3007A-72-080 Engine - New Effusion-Cooled Combustion Liner

1 5(b) 72-00-45-0111-Sep-98AE 7A

3007A-72-081 Engine - Improved 2nd-Stage High-Pressure-Turbine Vane Assembly and High-Pressure-Turbine Inner Case Assembly

5 5(b) 72-51-00-0516-Feb-04AE 7A

3007A-72-082 Cancelled Prior to PublicationAE

3007A-72-083 Engine - New No. 4 Carbon Seal (23070366 or 23071880)

2 5(b) 72-25-00-0116-Mar-01AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-084 Cancelled Prior to PublicationAE

3007A-72-085 Cancelled Prior to PublicationAE

01-May-15Page 6 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-086 Cancelled Prior to PublicationAE

3007A-72-087 Cancelled Prior to PublicationAE

3007A-72-088 Cancelled Prior to PublicationAE

3007A-72-089 Cancelled Prior to PublicationAE

3007A-72-090 Cancelled Prior to PublicationAE

3007A-72-091 Cancelled Prior to PublicationAE

3007A-72-092 Cancelled Prior to PublicationAE

3007A-72-093 Cancelled Prior to PublicationAE

3007A-72-094 Superceded by AE 3007A-72-1652 25-Sep-00AE

3007A-72-095 Cancelled Prior to PublicationAE

3007A-72-096 Cancelled Prior to PublicationAE

3007A-72-097 Engine - New Center-Sump Housing1 5(b) 72-39-00-0116-Mar-01AE 7A, 7A1/1

3007A-72-098 Cancelled Prior to PublicationAE

3007A-72-099 See AE 3007A-A-72-099AE

3007A-72-100 Engine - Improved 1st-Stage High-Pressure-Turbine Vane Assembly

4 8 72-51-00-0127-Sep-99AE 7A

3007A-72-101 Cancelled Prior to PublicationAE

3007A-72-102 Cancelled Prior to PublicationAE

01-May-15Page 7 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-103 Engine - New Effusion-Cooled Combustion Liner Assembly (23071148)

3 8 72-00-45-0107-Jul-03AE 7A, 7A1/1, 7A1

3007A-72-104 Engine - New Upper and Lower Rear Turbine Bearing Support Heat Shields

4 5(a) 72-59-00-0724-Oct-05AE 7A

3007A-72-105 See AE 3007A-A-72-105AE

3007A-72-106 Engine - Improved Low-Pressure-Turbine Rear Shaft

1 5(b) 72-58-00-0116-Mar-01AE 7A

3007A-72-107 Superceded by AE 3007A-72-1261 19-Feb-01AE

3007A-72-109 Engine - New No. 4 Teflon Lip Seal (23070367)

2 5(b) 72-25-00-0116-Mar-01AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-110 Engine - New 2nd-Stage High-Pressure Turbine Blade Track (23070945)

2 5(b) 72-51-00-0529-Mar-00AE 7A

3007A-72-111 Superceded by AE 3007A-72-135 and AE 3007A-72-153

6 13-Nov-01AE

3007A-72-112 Engine - AE 3007A1/1 and AE 3007A1/2 High-Pressure-Turbine Inner Casing - Rework to the AE 3007A1 Configuration

1 8 72-51-00-0503-Jun-99AE 7A1/1

3007A-72-113 Engine - AE 3007A1/1 and AE 3007A1/2 1st-Stage High-Pressure-Turbine Vane Assembly - Rework to the AE 3007A1 Configuration

2 8 72-51-00-0111-Dec-00AE 7A1/1

01-May-15Page 8 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-114 Engine - AE 3007A to AE 3007A1 Engine Conversion

5 7 7219-Feb-01AE 7A

3007A-72-115 Engine - Accessory Drive Gearbox - New Mounting Stud Washers

2 5(b) 72-00-63-0122-Oct-01AE 7A, 7A1/1, 7A1

3007A-72-116 Cancelled Prior to PublicationAE

3007A-72-117 Engine - AE 3007A1/1 2nd-Stage High-Pressure-Turbine Vane Assembly - Rework to the AE 3007A1 Configuration

1 8 72-51-00-0530-Apr-01AE 7A1/1

3007A-72-118 Engine - Split-Inner-Race Ball Bearing - New Bearing (23061084 or 23071692)

2 4 72-25-00-0129-Mar-00AE 7A

3007A-72-119 Cancelled Prior to PublicationAE

3007A-72-120 Engine - Rework the Low Pressure Turbine Case Assembly

2 7 72-57-00-0111-Dec-00AE 7A

3007A-72-121 See AE 3007A-A-72-121AE

3007A-72-122 See AE 3007A-A-72-122AE

3007A-72-123 Cancelled Prior to PublicationAE

3007A-72-124 Superceded by AE 3007A-72-1931 19-Feb-01AE

3007A-72-125 Engine - Outer Bypass-Duct Assembly - Molded Insert Test

1 4 72-73-00-0129-May-01AE 7A, 7A1/1

01-May-15Page 9 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-126 Engine - AE 3007A1 to AE 3007A1/1 Engine Reidentification

7 7 7229-Aug-11AE 7A1

3007A-72-127 Cancelled Prior to PublicationAE

3007A-72-128 Cancelled Prior to PublicationAE

3007A-72-129 Engine - Seal Retainer (23059830) to (23069646) - Rework

7 72-57-00-0527-Jan-99AE 7A

3007A-72-130 Superceded by AE 3007A-72-1261 15-Jun-00AE

3007A-72-131 See AE 3007A-A-72-131AE

3007A-72-132 Cancelled Prior to PublicationAE

3007A-72-133 Cancelled Prior to PublicationAE

3007A-72-134 Cancelled Prior to PublicationAE

3007A-72-135 Engine - AE 3007A1/1 to AE 3007A1 Engine Reidentification

5 7 7229-Aug-11AE 7A1

3007A-72-136 Cancelled Prior to PublicationAE

3007A-72-137 Cancelled Prior to PublicationAE

3007A-72-138 Cancelled Prior to PublicationAE

3007A-72-139 Engine - 1st-Stage High Pressure Turbine Wheel - Shot Peening

8 72-52-00-0522-Jun-99AE 7A, 7A1/1, 7A1

3007A-72-140 Engine - 2nd-Stage High-Pressure Turbine Wheel - Shot Peening

1 7 72-52-00-1009-May-05AE 7A

01-May-15Page 10 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-141 Superceded by AE 3007A-72-3213 7 72-63-00-0124-Feb-14AE 7A, 7A1/1, 7A1

3007A-72-142 See AE 3007A-A-72-142AE

3007A-72-143 See AE 3007A-A-72-143AE

3007A-72-144 Engine - AE 3007A1 to AE 3007A1/3 Engine Reidentification

5 7 7229-Aug-11AE 7A1

3007A-72-145 Engine - AE 3007A1/3 to AE 3007A1 Engine Reidentification

5 7 7229-Aug-11AE 7A1/3

3007A-72-146 Cancelled Prior to PublicationAE

3007A-72-147 Engine - Replace the 1st-Stage High Pressure Turbine Blades

8 72-52-00-0530-Jul-99AE 7A1

3007A-72-148 Engine - AE 3007A1 to AE 3007A1P Engine Reidentification

4 7 7229-Aug-11AE 7A1

3007A-72-149 Engine - AE 3007A1P to AE 3007A1 Reidentification

4 7 7229-Aug-11AE 7A1P

3007A-72-151 Cancelled Prior to PublicationAE

3007A-72-152 See AE 3007A-A-72-152AE

3007A-72-153 Engine - AE 3007A1/1 High-Pressure-Turbine Assembly and Combustion Liner Upgrade to the AE 3007A1 Configuration

4 7 72-00-51-0113-Nov-01AE 7A1/1

01-May-15Page 11 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-154 Engine - AE 3007A to AE 3007A1/1 Engine Conversion

2 7 7219-Feb-01AE 7A

3007A-72-155 Cancelled Prior to PublicationAE

3007A-72-156 See AE 3007A-A-72-156AE

3007A-72-157 Engine - 1st- to 2nd-Stage Turbine Spacer Serial Number Marking

5(b) 72-51-00-0515-Mar-00AE 7A1

3007A-72-158 Cancelled Prior to PublicationAE

3007A-72-159 Engine - AE 3007A1 to AE 3007A3 Engine Reidentification

4 7 7229-Aug-11AE 7A1

3007A-72-160 Engine - AE 3007A3 to AE 3007A1 Engine Reidentification

3 7 7229-Aug-11AE 7A3

3007A-72-161 Cancelled Prior to PublicationAE

3007A-72-162 Engine - New Rear Turbine Bearing Support (23073081) (Aft Sump Rework)

5 4 72-59-00-0120-Jun-05AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-163 Cancelled Prior to PublicationAE

3007A-72-164 Cancelled Prior to PublicationAE

3007A-72-165 Superceded by AE 3007A-72-3324 8 72-59-00-0122-Dec-05AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

01-May-15Page 12 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-166 Engine - New 1st- and 2nd-Stage Low Pressure Turbine Blades and 2nd-Stage Low Pressure Turbine Vane Ring

5 8 72-58-00-0519-Sep-14AE 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-167 Engine - New Fan Spinner Assembly (23070964)

3 7 72-00-21-0526-Jun-08AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-168 Engine - New Inlet Housing Hub Flowpath Extension (23073167)

2 5(b) 72-25-00-0116-Mar-01AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-169 Cancelled Prior to PublicationAE

3007A-72-171 Engine - New Center Sump Hardware to Reduce High Main Oil Pressure

3 5(b) 72-39-00-0101-Mar-04AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-172 Engine - New Compressor Stub Shaft (23072226)

3 8 72-00-57-0118-Jul-03AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-173 See AE 3007A-A-72-173AE

3007A-72-174 Engine - Install the ITT Trim Plug (23058854-01)

1 3 77-21-00-0122-Oct-01AE 7A1/1

3007A-72-175 Engine - New 1st-Stage High-Pressure Turbine Blades with Anti-Fret Coating

2 7 72-52-00-0507-Jan-02AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-176 Engine - Remove the 2nd-Stage High Pressure Turbine Wheel Balance Weights

5 8 72-52-00-0102-Sep-08AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-177 Superceded by AE 3007A-72-2611 7 72-39-00016-Sep-02AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

01-May-15Page 13 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-178 See AE 3007A-A-72-178AE

3007A-72-179 See AE 3007A-A-72-179AE

3007A-72-180 Engine - New LH and RH Core External Engine Service Manifold Assemblies

7 79-27-0023-Feb-04AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-181 Engine - Inspect the HP-LP Turbine Seal Installation

1 8 72-57-00-0507-May-01AE 7A

3007A-72-182 Engine - New No. 5 Carbon Seal (23073831)1 5(b) 72-39-00-0111-Dec-00AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-184 Engine - New Center Sump Forward Stationary Seal (23073794)

5(b) 72-39-0028-Jan-02AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-185 Cancelled Prior to PublicationAE

3007A-72-186 Engine - New 1st-Stage High-Pressure Turbine Vane Assembly (23073494)

1 5(b) 72-51-00-0126-Feb-01AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-187 Engine - New 8th- thru 13th-Stage Compressor Vane Assemblies

2 5(b) 72-37-00-0123-Oct-01AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-188 Engine - Remove the Cruciform Bolts from the Fan-Bearing Support Housing

5(b) 72-25-00-2031-Aug-00AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-189 Engine - New 2nd-Stage High-Pressure Turbine Blades with Anti-Fret Coating

1 7 72-52-00-1003-Sep-02AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

01-May-15Page 14 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-190 Superceded by AE 3007A-75-0203 8 72-39-00-0521-Dec-01AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-191 Engine - Accessory Gearbox - Install the Drain Plug

5(b) 72-63-00-0511-Dec-00AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-192 Engine - Replace the 1st-Stage High-Pressure Compressor Blades

1 4 72-35-00-0116-Mar-01AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-193 Engine - Replace the Identification Plate1 7 72-00-00-0112-May-03AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-194 Engine - Outer Bypass Duct - New Threaded Insert Assembly (23071788)

1 7 72-73-00-0128-Sep-09AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-195 Engine - Fan Wheel Inspection1 8 72-21-00-0107-Mar-01AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-196 Engine - RTBS Oil Supply Tube Wear Prevention Kit (23074075)

8 72-59-0023-Jul-01AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-197 See AE 3007A-A-72-197AE

3007A-72-198 Engine - New Rear Turbine Bearing Support Oil Supply Tube (23073941)

2 8 72-59-00-0128-Sep-09AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-199 Engine - New HP to LP Turbine Seal Assembly (23073953)

4 5(b) 72-57-00-0528-Sep-09AE 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-201 See AE 3007A-A-72-201AE

01-May-15Page 15 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-202 Engine - New Compressor-to-Turbine Shaft (23073165) and Compressor Shaft Cone Assemblies (23073282 and 23076016)

3 7 72-35-00-0108-Mar-04AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-203 Engine - New Fan (No. 0) Bearing Support Housing

1 5(b) 72-25-00-2012-May-03AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-205 Cancelled Prior to PublicationAE

3007A-72-207 See AE 3007A-A-72-207AE

3007A-72-208 Engine - New 1st-Stage Compressor Blade Rear Retainer Ring (23074307)

2 8 72-35-00-0115-May-06AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-209 Engine - New Outer Bypass Duct Bleed Port Adapter

7 72-73-0003-Feb-03AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-210 Engine - Inspect the High-Pressure Turbine 1st-Stage Vanes and Blades

3 5(a) 72-51-00-0127-Oct-08AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-211 Engine - No. 6 Carbon Seal Assembly Test1 5(b) 72-39-0014-Sep-05AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-212 Engine - Inspect the Low-Pressure Turbine Forward Shaft (23059694 and 23067076)

3 5(b) 72-58-00-0117-May-04AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-213 Engine - New HP- LP Low Diameter Seal Kit3 7 72-57-0028-Sep-09AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-214 Engine - New No. 4 Bearing Spanner Nut (23074208)

5(b) 72-39-0026-Jun-02AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

01-May-15Page 16 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-215 Engine - Install the 2nd-Stage High-Pressure Turbine Wheel Balance Weights (23038853)

2 5(b) 72-52-00-0128-Sep-09AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-216 Engine - New Rear Turbine Bearing Support (23073940)

1 7 72-59-00-0128-Sep-09AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-217 Engine - Install the ITT Trim Plug (23058854-01) for the AE 3007A Series Engines

7 77-21-00-1522-May-01AE 7A1/3, 7A1, 7A1P, 7A3

3007A-72-218 Cancelled Prior to PublicationAE

3007A-72-219 Superceded by AE 3007A-74-0051 5(a) 72-63-00-0116-Apr-02AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-220 Engine - Inspect the Fan Blades 4 72-21-00-0115-May-01AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-225 See AE 3007A-A-72-225AE

3007A-72-226 Engine - Front Frame Mounting-Pad Bores Inspection and Repair

1 4 72-25-00-0126-Aug-02AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-227 Cancelled Prior to PublicationAE

3007A-72-228 Engine - Test the Upper Bevel-Gear Oil Manifold Assembly for Flow and Target

5(b) 72-25-4317-Sep-02AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-229 Engine - Install the Mid-Span Bearing with Loctite 290

5(b) 75-25-0031-Aug-01AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

01-May-15Page 17 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-230 Engine - New Mid-Span Bearing Housing Cover

2 2(b) 72-25-01-0005-Aug-02AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-231 Cancelled Prior to PublicationAE

3007A-72-232 Engine - New 1st, 2nd, and 3rd-Stage LP Turbine Blade Tracks

5(b) 72–57–0008-Dec-03AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-234 Engine - New Front Frame Assembly (23074816) and Retention Plates (23075057)

7 72-25-0112-May-03AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-235 Superceded by AE 3007A-72-3212 8 72-63-0008-Jun-09AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-237 Engine - Accessory Gearbox Identification Plate

4 72-63-00-0123-Oct-01AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-238 Engine - Outer Bypass Duct - New Composite Flange Reinforcement Plate

7 72-73-0018-Jul-03AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-239 Engine - Rework the No. 6 Bearing Insert1 5(b) 72-25-01-0112-Oct-09AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-240 Engine - New 6th- thru 13th-stage Chrome Carbide Coated Knife Seal Compressor Wheels and Honeycomb Vanes

5 7 72-00-3503-Jan-11AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

01-May-15Page 18 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-241 Engine - New Cool Air Buffered Center Sump8 7 72-39-0110-Feb-14AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-242 Engine - New Mid-span Bearing Housing with Retaining Cover

1 8 72-25-0005-Aug-02AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-243 Engine - Front Sump Housing Assembly Inspection

2 5(b) 72-25-0030-Dec-14AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-244 Engine - 1st-Stage Compressor Wheel Bore Inspection

3 5(b) 72-35-0104-Feb-04AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-246 Superceded by AE 3007A-72-3271 5(b) 72-25-0009-May-05AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-247 Engine - Reinforcing Plates (23075877) for Plug Repaired Front Frame Forward Flange

8 8 72-25-0013-Jun-11AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-248 Engine - New HP-LP Low-diameter Turbine Seal Kit (23074649)

3 7 72-57-0012-Mar-12AE 7A1, 7A1/3, 7A1P, 7A3

3007A-72-250 Engine - New 7th-Stage Compressor Wheel (23074217)

8 72-35-0124-Jan-12AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-251 Engine - Inspection of the Front Sump1 5(a) 72-25-0023-May-05AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

01-May-15Page 19 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-253 Superceded by AE 3007A-72-3213 3 72-63-0024-Feb-14AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-254 Engine - Thick Bore 13th- and 14th-Stage Compressor Wheels

8 72-35-0003-Jan-11AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-255 Engine - Compressor Cone Shafts and Tie Bolt - Rework

4 7 72-35-0026-Dec-11AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-256 Engine - New Center Sump Forward Stationary Seal

2 5(b) 72-39-0030-Mar-09AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-257 Engine - New Center Sump Rear Stationary Seal

1 5(b) 72-39-0008-Mar-04AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-258 Engine - Replace Harness Support Bracket on the Forward and Aft Front Frame Splitline

7 72-00-2501-Mar-04AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-259 Engine - New No. 5 Carbon Seal Kit 7 31-Oct-03AE 7A

3007A-72-260 Engine - New High Pressure Turbine Upgrade (Block III)

11 7 72-51-0009-Apr-15AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

R

01-May-15Page 20 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-261 Engine - Two Piece Compressor Rear Air Seal Assembly

2 8 72-39-00031-Oct-14AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-262 Engine - Accessory Drive Gearbox Assembly - New Starter Mounting Pad Cover Configuration

1 7 72-63-1031-Oct-05AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-263 Superceded by AE 3007A-72-2842 8 72-57-0016-Oct-03AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-264 Engine - New One Piece Rear Compressor Seal

1 7 72-39-0031-Oct-14AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-265 See AE 3007A-A-72-265AE

3007A-72-266 Engine - No. 4 Ball Bearing Inspection1 4 72-39-0005-Aug-05AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-267 Engine - AE 3007A1E to AE 3007A1 Engine Reidentification

1 7 72-00-0029-Aug-11AE 7A1E

3007A-72-268 Superceded by AE 3007A-72-3241 4 72-39-0005-Aug-05AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-269 Engine - AE 3007A1 to AE 3007A1E Engine Reidentification

2 7 72-00-0029-Aug-11AE 7A1

01-May-15Page 21 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-270 Superceded by AE 3007A-72-3251 4 72-39-0005-Aug-05AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-272 Cancelled Prior to PublicationAE

3007A-72-273 Engine - Change the Location of the Compressor Vibration Accelerometer

1 7 72-39-0030-Mar-05AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-274 Engine - Accessory Gearbox Starter Pad Drain - Remove the Drain Cap or Starter Drain Adapter

1 8 72-63-0012-Nov-07AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-275 Engine - New Front Sump Assembly4 5(b) 72-25-6322-Dec-09AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-276 Engine - New Right and Left Hand Coverplates and Transfer Tubes

4 7 72-00-0016-Apr-07AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-277 Engine - Radial Quill Shaft Screening (23056789)

5(b) 72-00-6330-Jul-03AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

01-May-15Page 22 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-278 Engine - Accessory Drive Gearbox Assembly - New FPMU Drive Gear

4 8 72-63-0005-Feb-07AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-279 Engine - New Front Frame Assembly2 8 72-25-0003-Oct-11AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-280 Engine - 1st-stage High Pressure Turbine Blade - Rework

8 5(b) 72-52-0014-Jun-10AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-281 Engine - 2nd-stage High Pressure Turbine Blade - Rework

5(b) 72-52-0023-Feb-04AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-283 Engine - Effusion-cooled Combustion Liner Assembly Re-release (23071148)

2 7 72-45-0017-May-07AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-284 Engine - Rework the HP to LP Turbine Seal Assembly

4 72-57-0016-Oct-03AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-285 Engine - New Diffuser to HPT Case Tube Support Bracket

8 72-00-5722-Nov-04AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-286 Engine - Compressor Diffuser (23073092) - Chamfer the Aft End of Inner Flange

5(a) 72-39-0009-Feb-04AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

01-May-15Page 23 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-287 Engine - Rear Outer-bypass-duct Support Assembly Rework

3 5(b) 72-73-0008-Aug-11AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-288 Engine - New 1st-stage Compressor Inner Ring Segment Assembly with XPT Coating - Rework

1 7 72-37-0001-Jul-13AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-289 Engine - Rework the Front Frame Assembly and Install the New Single Forward Ground Handling Bracket

1 5(b) 72-00-7319-Jul-04AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-290 Engine - New Front Frame and Lifting Bracket3 7 72-25-0023-May-11AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-291 Engine - New Rear Turbine Bearing Support and Forced Mixer Core Flow Path Support Assembly

2 5(b) 72−59−0024-Aug-09AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-292 Engine - New Low-pressure Turbine Case Assembly (23079336)

7 72-57-0013-Dec-04AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-293 Engine - New 1st-stage Low Pressure Turbine Wheel (23076801) with Brush Seal Land Removed

7 72-58-1925-Apr-05AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

01-May-15Page 24 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-294 Engine - Center Sump Scavenge and Pressure/Vent Oil Tubes - High Temperature O-rings Installation

1 5(b) 72-39-0026-Apr-04AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-295 Engine - New Outer-bypass Duct and Access Covers

1 7 72-00-7328-Sep-09AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-296 Cancelled Prior to PublicationAE

3007A-72-297 Engine - New Effusion - Cooled Combustion Liner Assemblies (23077461 and 23078026)

7 72-00-4506-Sep-05AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-298 Engine - AE 3007A1/1, AE 3007A1/3, AE 3007A1, AE 3007A1P, or AE 3007A3 to AE 3007A1E Engine Conversion

4 7 72-00-0028-May-14AE 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-299 Engine - New Radial Drive Quill Shaft (23077207)

2 4 72–63–1013-Jun-06AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-300 Engine - Inspection of the Fan-blace Forward Retainer Assembly (23062491)

4 72–00–2126-Apr-04AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-301 Cancelled Prior to PublicationAE

3007A-72-302 Engine - New O-ring (M83485/1-047) for the No. 3 Bearing Damper

5(b) 72–25–6315-Mar-04AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

01-May-15Page 25 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-303 Engine - New Fan (No. 0) Bearing Oil Nozzle (23076966)

2 8 72–25–3218-Feb-08AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-304 Superceded by AE 3007A-72-3611 4 72-21-2026-Jun-08AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-305 Engine - New Compresor-to-turbine Shaft Heat Shield (23078706, 23079062)

1 7 72−35−0028-Sep-09AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-306 Engine - New Combustion Liner - Cast Bracket

2 5(b) 72-45-0023-Jul-07AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-308 Engine - Increased Compressor Tie Bolt Stretch Value

8 72-35-0114-Jun-04AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-309 Engine - New 2nd-stage Low Pressure Turbine Vane and Seal Assembly

2 7 72-58-0028-May-13AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-310 Engine - Measure the Stretch of the Compressor Tie Bolt

4 4 72-35-0128-Sep-09AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-311 Engine - New Compressor Diffuser Assembly (23079071)

7 72-39-0124-Oct-05AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-312 See AE 3007A-A-72-312AE

01-May-15Page 26 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-313 See AE 3007A-A-72-313AE

3007A-72-314 Engine – Inspection of 3rd–stage Low Pressure Turbine Blades

1 7 72-53-0002-Sep-04AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-315 Engine - Combustion Liner Inner-wall Borescope Inspection

2 2(b) 72-40-0023-Aug-05AE 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-321 Engine - Accessory Drive Gearbox Assembly - New Starter Shaft Seal

2 8 72-63-1012-Nov-07AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-322 Engine - New Glass-peened 1st-stage Compressor Blade (23079367)

5(b) 72-35-0106-May-05AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-323 Engine - New 1st-stage HPT Blade (23079436)

2 7 72-52-0316-Aug-10AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-324 Engine - No. 4 Ball Bearing Inspection 4 72-39-0005-Aug-05AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-325 Engine - No. 4 Ball Bearing Inspection 4 72-39-0005-Aug-05AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-326 Engine - New 1st-stage HPT Blade (23079576)

2 7 72-52-0320-Nov-06AE 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-327 Engine - New Teflon Seal (23080495) on No. 4 Carbon Seal

2 5(b) 72-25-0030-Sep-09AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

01-May-15Page 27 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-328 Engine - New Front Sump Housing (23080647) without Anti-rotation Pin

1 7 72-25−0028-Sep-09AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-329 Engine - Front Sump Assembly and Related Components Inspection for Oil Leakage

1 4 72-35-0017-Nov-05AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-330 Engine - Accessory Gearbox Starter Pad Drain - Install the Open Starter Drain Adapter (23083402 or 23077526)

1 8 72-63-0012-Nov-07AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-331 Engine - New Fan Bearing Support Housing Assembly (23081557) and Liner (23080768)

3 8 72-00-2518-Jan-10AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-332 Engine - New Low Pressure Turbine Rear-shaft Plug O-ring (23078077-5)

1 5(b) 72-59-1503-Jul-06AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-333 Engine - Inspection of 3rd, 4th, 5th & 13th-stage Compressor Wheels

6 7 72-35-0128-Sep-09AE 7A, 7A1/1, 7A1/3, 7A1,7A1E, 7A1P, 7A3

3007A-72-334 Superceded by AE 3007A-72-3482 4 72-25-6329-Jul-09AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

01-May-15Page 28 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-335 Superceded by AE 3007A-72-3481 4 72-25-0003-May-07AE 7A1/1, 7A1/3, 7A1,7A1E, 7A1P, 7A3

3007A-72-336 Engine - Upper and Lower Rear Turbine-bearing-support Heat Shield Washer (MS14151-3)

1 8 72-59-1731-Oct-14AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-337 Superceded by AE 3007A-72-3482 4 72-35-0103-May-07AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-338 Engine - Inspection of the Fan Spinner Assembly

3 8 72-00-21-0518-Feb-08AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-339 Engine - Bevel Pinion gearshaft - Rework1 4 72-25-0012-May-08AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-341 Engine - Examine the Front Frame at the Front Sump Mounting Surface

2 4 72-25-0016-Aug-10AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-343 Engine - New Bypass Duct Rear Support Assembly (23079823)

7 72-73-0015-Dec-09AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

01-May-15Page 29 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-345 Engine - Bolted 2nd- and 3rd-Stage Low Pressure Turbine Vane-and-Seal Assembly

4 5(b) 72-57-0024-Oct-14AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-346 See AE 3007A-A-72-346AE

3007A-72-347 Superceded by AE 3007A-72-3762 7 72-25-6309-May-11AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-348 Superceded by AE 3007A-72-4015 4 72-30-2520-Dec-11AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-349 Engine - Front Sump Bevel Gear Retaining Ring - Inspection

2 8 72-25-0020-Jul-07AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-350 Engine - Rework of the Accessory Gearbox Input Bevel Gearshaft

2 4 72−63−0006-Mar-15AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-351 Engine - Rework the Front Sump Bevel Gear4 4 72-25-0031-Oct-14AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-352 Engine - 2nd-stage High Pressure Turbine Wheel (23074462) - Fluorescent Penetrant Inspection

1 4 72-52-0028-Sep-09AE 7A1E

3007A-72-353 Cancelled Prior to PublicationAE

01-May-15Page 30 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-354 Engine - Replace Suspect 3rd-Stage Compressor Wheels

8 72-35-0009-Aug-07AE 7A, 7A1/1, 7A1

3007A-72-355 Engine - Replace Specific 3rd-, 5th- and 6th-stage Compressor Wheels

1 8 72-35-0016-Jun-08AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-356 Engine - 1st- and 2nd-stage High Pressure Turbine Wheel - Fluorescent Penetrant Inspection

1 5(a) 72-52-0019-May-08AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-357 Engine - Compressor Cone Shaft Assembly Inspection

5(a) 72-35-0011-Oct-07AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-358 Cancelled Prior to PublicationAE

3007A-72-359 Engine - Reworked Combustion Liners with New Ferrule Swirler Assembly (23088816)

1 5(b) 72-45-0029-Apr-13AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-360 Superceded by AE 3007A-72-4053 4 72-30-0016-May-11AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-361 Engine - Redesigned One Piece Fan Spinner (23087826)

2 8 72-00-2124-May-10AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-363 Engine - Rework the Outer Bypass Duct - Molded Insert Assembly with New Self-locking Square Nut (23088288)

3 8 72-73-0015-Jun-10AE 7A1, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A2, 7A3

01-May-15Page 31 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-364 Engine - Outer Bypass Duct Molded Insert Assembly with New Self-locking Square Nut (23088288)

2 8 72-73-0005-Apr-10AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-365 Engine - New Access Cover (23088582) (with Bleed Port Adapter) with New Blind Insert Square Nuts (23088288)

7 72-73-0009-May-11AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A2, 7A3

3007A-72-366 Engine - 2nd-stage High Pressure Turbine Wheel - Fluorescent Penetrant Inspection

5(a) 72-52-2119-Aug-08AE 7A1, 7A1E

3007A-72-367 See AE 3007A-A-72-367AE

3007A-72-368 Engine - 2nd-Stage High Pressure Turbine Wheel - Ultrasonic Testing Inspection

3 8 72-52-0024-May-10AE 7A, 7A1/1, 7A1/2, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-369 Engine - 2nd-Stage High Pressure Turbine Wheel - Ultrasonic Testing Inspection in an Engine Shipping Stand

2 8 72-52-0005-Nov-09AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-370 Engine - Alternate Input Bevel Gear Ball Bearing (23064227)

7 72-63-0011-Jan-10AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-371 Engine - New 2nd-Stage Low Pressure Turbine Blade (23088549) and Smashplate (23087913)

5(b) 72-58-0012-Jan-10AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

01-May-15Page 32 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-372 Engine - Non-Slotted 2nd-Stage Low Pressure Turbine Bladed Wheel Assemblies(23088283 and 23088284)

7 72-58-0002-Mar-10AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-373 Engine - Replace Specific 5th- and 6th-Stage Compressor Wheels

2 8 72-35-0002-Nov-09AE All 7A Series

3007A-72-375 Engine - New Center Sump Forward Impeller (23089048)

5(b) 72-39-0010-Nov-09AE 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-376 Engine - Change the Configuration of the Front Sump Housing Assembly

1 7 72-25-6315-Jul-13AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-377 See AE 3007A-A-72-377AE All 7A Series

3007A-72-378 Engine - Peened 2nd-Stage High Pressure Turbine Wheel - Eddy Current Inspection

8 72-52-0006-Apr-10AE All 7A Series

3007A-72-379 Engine - Cool Front Sump Housing Assembly Configuration for the AE 3007A1E Engine

2 7 72-25-0020-Dec-11AE 7A1E

3007A-72-380 Engine - New Split Inner-Race (No. 1) Ball Bearing (23087679)

5(b) 72-00-5703-Feb-10AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-381 Engine - Examine the 6th- thru 13th-Stage Compressor Vanes for Missing Braze Fillet

5(b) 72-37-0002-Mar-10AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-382 Superceded by AE 3007A-72-4112 8 72-35-0015-Nov-12AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A2, 7A3

01-May-15Page 33 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-383 Engine - No. 4 Carbon Seal Runner (23087178)

5(b) 72-35-0015-Jun-10AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-384 Engine - Accessory Gearbox Cable Assemblies (23089681 and 23089682)

1 8 72-00-6309-May-11AE 7A2

3007A-72-385 Engine - Air Distribution Ring Chamfer Dimensional Inspection

1 8 72-52-0025-Jul-11AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-386 See AE 3007A-A-72-386AE

3007A-72-388 Engine - 6th- thru 13th-Stage Compressor Wheel Knife Edge Seals - Jentek Eddy Current Inspection

4 8 72-35-0012-Aug-13AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A2, 7A3

3007A-72-389 Engine - Development Components Removal from AE 3007A2 Flight Test Engines

1 8 7209-May-11AE 7A2

3007A-72-390 See AE 3007A-A-72-390AE

3007A-72-391 Engine - New Center Sump Stud Nut (23087278-09) with Lower Torque Values

5(b) 72-39-0005-Dec-12AE 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-392 Superceded by AE 3007A-72-3972 8 72-37-0022-Aug-11AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A2, 7A3

01-May-15Page 34 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-393 Superceded by AE 3007A-72-3972 8 72-37-0022-Aug-11AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A2, 7A3

3007A-72-394 Engine - Change the Test Development Engines to AE 3007A2 Production Standard

1 8 7229-Apr-11AE 7A2

3007A-72-395 Cancelled Prior to PublicationAE

3007A-72-397 Engine - Rework the Honeycomb Seal of the 6th- thru 13th-Stage Compressor Vane Assemblies

1 8 72-37-0004-Feb-13AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A2, 7A3

3007A-72-398 Cancelled Prior to PublicationAE

3007A-72-399 Superceded by AE 3007A-72-4011 4 72-35-0020-Dec-11AE 7A1/1, 7A1/3, 7A1E, 7A1P, 7A2, 7A3

3007A-72-401 Superceded by AE 3007A-72-4151 5(b) 72-35-0008-Apr-13AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A2, 7A3

3007A-72-402 Engine - New Aft Sump Cover Packing (23090504)

7 72-59-0010-Sep-12AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A2, 7A3

01-May-15Page 35 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-403 Engine - Shot Peen Rework of Unpeened Low Pressure Turbine Wheels

1 8 72-58-0017-Dec-12AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-404 Engine - One-Piece Compressor Rear Stationary Seal (23089859)

7 72-39-0015-Apr-13AE 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-72-405 Engine - Improved Non-cooled Front Sump Configuration

4 72-30-0025-Feb-13AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-406 Engine - New 6th- thru 13th-stage Aluminum Oxide Compressor Wheel Knife Edge Seals and Increased Honeycomb Compressor Vane Radii

8 72-35-0006-Aug-12AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A2, 7A3

3007A-72-407 See AE 3007A-A-72-407AE

3007A-72-408 See AE 3007A-A-72-408AE

3007A-72-409 Engine - New Fan Wheel (23077611) 7 72-21-0029-Oct-12AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-72-410 Engine - Alternate No. 2A Roller Bearing Retaining Bolts (MS9556-08) with Loctite 242

1 7 72-25-0021-Aug-14AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A2, 7A3

3007A-72-411 Engine - Inspection of 6th- thru 13th-Stage Compressor Wheel Knife Edge Seals - Ultrasonic Testing Inspection

7 72-35-0015-Nov-12AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

01-May-15Page 36 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-413 Engine - Accessory Gearbox Retention Cables (23090244)

7 72-25-0121-Jan-14AE 7A2

3007A-72-414 See AE 3007A-A-72-414AE

3007A-72-415 Engine - Compressor Front Sump No. 4 Dual (High Temp) Carbon Seal (23089654) with No. 3 Bearing Spacer (23075612)

1 5(b) 72-35-0031-Oct-14AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A2, 7A3

3007A-72-416 Engine - New Fan Bearing Support Housing Assembly (23091498) with Bolted Bearing Cage (23091495)

8 72-25-0029-Aug-13AE 7A1/1, 7A1/3, 7A1, 7A1E, , 7A1P, 7A2, 7A3

3007A-72-417 Engine - Fan Drive Shaft Bearing Nut (23091119) with Increased Assembly Torque

1 8 72-25-0009-Apr-15AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A2, 7A3

R

3007A-72-418 Engine - Non-slotted 1st-stage Low Pressure Turbine Bladed Wheel Assemblies (23090092 and 23090094)

7 72-58-0031-Oct-14AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A2, 7A3

3007A-72-419 See AE 3007A-A-72-419AE

3007A-72-420 Glass-Peened 1st-Stage Compressor Blade (23079367) - Introduction of Soft Life Limits

8 72-35-0125-Nov-13AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A2, 7A3

01-May-15Page 37 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-72-421 Engine - High Pressure Turbine 1st and 2nd-Stage Wheel Bore Eddy Current Inspection

1 8 72-52-0029-Aug-14AE 7A, 7A1/1, 7A1/3, 7A1E, 7A1P, 7A2, 7A3

3007A-72-422 Engine - Compressor Non-cooled Front Sump Fabricated Housing (23090801)

7 72-25-0021-Feb-14AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-73-001 Cancelled Prior to PublicationAE

3007A-73-002 Cancelled Prior to PublicationAE

3007A-73-003 Engine Fuel And Control - New Right Hand and Left Hand Fuel Manifold, Fuel Manifold-to-Service Manifold Tubes and Pressure, Scavenge, and Vent Oil Tubes

3 7 73-13-10-0122-Oct-01AE 7A

3007A-73-004 Cancelled Prior to PublicationAE

3007A-73-005 Engine Fuel and Control - Fuel Tube and FADEC A Hardness Clamping

3 76-11-00-5514-Mar-97AE 7A

3007A-73-006 Cancelled Prior to PublicationAE

3007A-73-007 Cancelled Prior to PublicationAE

3007A-73-008 Cancelled Prior to PublicationAE

3007A-73-009 Engine Fuel and Control - New Fuel Pump-and-Metering Unit (FPMU 106)

2 4 73-21-00-0102-Dec-98AE 7A

3007A-73-010 Superceded by AE 3007A-73-0142 22-Mar-99AE

01-May-15Page 38 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-73-011 Cancelled Prior to PublicationAE

3007A-73-012 See AE 3007A-A-73-012AE

3007A-73-013 Engine Fuel and Control - Fuel Pump-and-Metering Unit (FPMU) Intermediate Drive Shaft Inspection

2 5(b) 73-21-00-0122-Oct-01AE 7A, 7A1/1, 7A1

3007A-73-014 See AE 3007A-A-73-014AE

3007A-73-015 Cancelled Prior to PublicationAE

3007A-73-016 Superceded by AE 3007A-73-0214 22-Apr-99AE

3007A-73-017 Superceded by AE 3007A-73-0211 30-Nov-98AE

3007A-73-018 Superceded by AE 3007A-73-0141 21-May-98AE

3007A-73-019 Superceded by AE 3007A-73-0441 20-Nov-00AE

3007A-73-020 Engine Fuel and Control - New Fuel Pump-and-Metering Unit Impending Fuel Filter Blockage Indicator

2 8 73-37-00-0122-Oct-01AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-73-021 Superceded by AE 3007A-73-0253 26-Apr-99AE

3007A-73-022 Engine Fuel and Control - New FADEC with Software Version II.6 for the AE 3007A1 Engine

3 8 73-25-10-0119-Apr-02AE 7A1/1, 7A1

3007A-73-023 Cancelled Prior to PublicationAE

3007A-73-024 See AE 3007A-A-73-024AE

01-May-15Page 39 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-73-025 Engine Fuel and Control - New FADEC with Software Version VI.7 for the AE 3007A and AE 3007A1/1 Engines

5 8 73-25-10-0119-Apr-02AE 7A, 7A1/1

3007A-73-026 Engine Fuel and Control - Label the FADEC1 8 73-25-10-0120-May-99AE 7A, 7A1/1, 7A1

3007A-73-027 Engine Fuel and Control - New FADEC with Software Version IV.2 for the AE 3007A1/3 Engine

1 8 73-25-10-0115-Dec-00AE 7A1/3

3007A-73-028 Engine Fuel and Control - New FADEC with Software Version IV.2 for the AE 3007A1 Engine

2 8 73-25-10-0115-Dec-00AE 7A1

3007A-73-029 Engine Fuel and Control - New FADEC with Software Version IV.2 for the AE 3007A1P Engine

1 8 73-25-10-0115-Dec-00AE 7A1P

3007A-73-030 Engine Fuel and Control - New FADEC with Software Version B4.3 for the AE 3007A3 Engine

1 8 73-25-10-0115-Dec-00AE 7A3

3007A-73-031 Cancelled Prior to PublicationAE

3007A-73-032 Engine Fuel and Control - New FPMU Magnetic Seal

7 73-21-0009-Apr-02AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-73-033 Cancelled Prior to PublicationAE

3007A-73-034 Cancelled Prior to PublicationAE

01-May-15Page 40 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-73-035 Cancelled Prior to PublicationAE

3007A-73-036 Cancelled Prior to PublicationAE

3007A-73-037 Cancelled Prior to PublicationAE

3007A-73-038 Cancelled Prior to PublicationAE

3007A-73-039 Cancelled Prior to PublicationAE

3007A-73-040 Cancelled Prior to PublicationAE

3007A-73-041 See AE 3007A-A-73-041AE

3007A-73-042 Engine Fuel and Control - Repair the FADEC1 8 73-25-10-0123-Aug-00AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-73-043 Engine Fuel and Control - New FADEC with Software Version B5.1.1 for the AE 3007A and AE 3007A1/1 Engines

3 8 73-25-10-0125-Sep-01AE 7A, 7A1/1

3007A-73-044 Engine Fuel and Control - New FADEC with Software Version B5.1.1 for the AE 3007A1 Engine

2 8 73-25-10-0125-Sep-01AE 7A1

3007A-73-045 Engine Fuel and Control - New FADEC with Software Version B5.1.1 for the AE 3007A1P Engine

2 8 73-25-10-0125-Sep-01AE 7A1P

01-May-15Page 41 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-73-046 Engine Fuel and Control - New FADEC with Software VersionB5.1.1 for the AE 3007A1/3 Engine

2 8 73-25-10-0125-Sep-01AE 7A1/3

3007A-73-047 Engine Fuel and Control - New FADEC with Software Version B5.1.1 for the AE 3007A3 Engine

2 8 73-25-10-0125-Sep-01AE 7A3

3007A-73-048 Superceded by AE 3007A-73-0532 8 73-21-0013-Jun-05AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-73-049 Engine Fuel Control - Fuel Pump and Metering Unit - Main Metering Valve Servo Valve

8 73-21-0009-Apr-02AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-73-050 Engine Fuel and Control - Clearance Inspection between the Fuel Manifold and the Aft-Sump Forward Pressure Oil Tube

1 8 73-13-1031-Jan-05AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-73-051 Engine Fuel and Control - Repair the FADEC with the Suspect A02 Digital Card

2(b) 73-25-0012-Apr-02AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-73-052 Engine Fuel and Control - Repair the FADEC with the Suspect A03 Digital Card

2(d) 73-25-0029-Jul-02AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-73-053 Engine Fuel and Control - Replace the Fuel Pump-and-Metering Unit

3 2(d) 73-21-0013-Jun-05AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

01-May-15Page 42 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-73-054 Engine Fuel Control - Replace the Fuel Pump and Metering Unit

8 73-21-1013-Sep-02AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-73-055 Engine Fuel and Control - Fuel Supply Nozzle1 7 73-11-0014-Jun-04AE All 7A Series

3007A-73-056 Engine Fuel and Control - Replace the Fuel Pump-and-Metering Unit

8 73-21-0003-Apr-03AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-73-057 Engine Fuel and Control - Fuel Pump-and-Metering Unit - Fuel Filter Electrical Impending-Bypass Indicator Inspection

2 8 73-37-0014-Jul-08AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-73-058 Engine Fuel and Control - FADEC CA Identificaiton Label

3 8 73-25-0019-Dec-05AE 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-73-059 Engine Fuel and Control - New FADEC with Software Version B7.5 for the AE 3007A1 Engine

7 73-25-0021-Jul-03AE 7A1

3007A-73-060 Engine Fuel and Control - New FADEC with Software Version B7.5 for the AE 3007A1/1 Engine

7 73-25-0021-Jul-03AE 7A1/1

3007A-73-061 Engine Fuel and Control - New FADEC with Software Version B7.5 for the AE 3007A1/3 Engine

7 73-25-0021-Jul-03AE 7A1/3

01-May-15Page 43 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-73-062 Engine Fuel and Control - New FADEC with Software Version B7.5 for the AE 3007A3 Engine

7 73-25-0021-Jul-03AE 7A3

3007A-73-063 Engine Fuel and Control - New FADEC with Software Version B7.5 for the AE 3007A1P Engine

7 73-25-0021-Jul-03AE 7A1P

3007A-73-064 Engine Fuel and Control - New FADEC with Software Version B7.5 for the AE 3007A1E Engine

7 73-25-0021-Jul-03AE 7A1E

3007A-73-065 Cancelled Prior to PublicationAE

3007A-73-066 Engine Fuel and Control - New FADEC Hardware for the AE 3007A, AE 3007A1/1, AE 3007A1, AE 3007A1P, AE 3007A3, AE 3007A1/3 Engines

7 73-25-0014-Jun-04AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-73-067 Engine Fuel and Control - New FADEC with Software Version B7.6 for the AE 3007A1 Engine

7 73-25-0017-Jun-04AE 7A1

3007A-73-068 Engine Fuel and Control - New FADEC with Software Version B7.6 for the AE 3007A3 Engine

1 7 73-25-0012-Jul-04AE 7A3

01-May-15Page 44 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-73-069 Engine Fuel and Control - New FADEC with Software Version B7.6 for the AE 3007A1/3 Engine

1 7 73-25-0012-Jul-04AE 7A1/3

3007A-73-070 Engine Fuel and Control - New FADEC with Software Version B7.6 for the AE 3007A1P Engine

7 73-25-0017-Jun-04AE 7A1P

3007A-73-071 Engine Fuel and Control - New FADEC with Software Version B7.6 for the AE 3007A1/1 Engine

7 73-25-0017-Jun-04AE 7A1/1

3007A-73-072 Engine Fuel and Control - New FADEC with Software Version B7.6 for the AE 3007A1E Engine

7 73-25-0017-Jun-04AE 7A1E

3007A-73-073 Engine Fuel and Control - New FADEC Diode Adapter

2 3 73-25-0014-Sep-05AE 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-73-074 Engine Fuel and Control - Compressor Variable Geometry Actuator Fuel Transfer Manifold

1 7 73-13-1505-Sep-06AE 7A1, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-73-075 Engine Fuel and Control - New FADEC with Software Version B8.0 for the AE 3007A1 Engine

1 8 73-25-0022-Sep-14AE 7A1

01-May-15Page 45 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-73-076 Engine Fuel and Control - New FADEC with Software Version B8.0 for the AE 3007A1/1 Engine

1 8 73-25-0022-Sep-14AE 7A1/1

3007A-73-077 Engine Fuel and Control - New FADEC with Software Version B8.0 for the AE 3007A1/3 Engine

1 8 73-25-0022-Sep-14AE 7A1/3

3007A-73-078 Engine Fuel and Control - New FADEC with Software Version B8.0 for the AE 3007A1E Engine

1 8 73-25-0009-Aug-05AE 7A1E

3007A-73-079 Engine Fuel and Control - New FADEC with Software Version B8.0 for the AE 3007A1P Engine

1 8 73-25-0009-Aug-05AE 7A1P

3007A-73-080 Engine Fuel and Control - Remove the Inner Duct Aft Support Assemblies

1 7 73-11-0023-Feb-07AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-73-081 Engine Fuel and Control - New CVG Actuator Front Frame Inner Fuel Cap Assembly (23084070)

1 7 73-13-0015-Oct-07AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-73-082 Engine Fuel and Control - New FADEC with Software Version B8.0.5 for the AE 3007A1 Engine

2 8 73-25-0022-Sep-14AE 7A1

01-May-15Page 46 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-73-083 Engine Fuel and Control - New FADEC with Software Version B8.0.5 for the AE 3007AP1 Engine

3 8 73-25-0022-Sep-14AE 7A1P

3007A-73-084 Engine Fuel and Control - New FADEC with Software Version B8.1 for the AE 3007A1 Engine

7 73-25-0030-Mar-07AE 7A1

3007A-73-085 Engine Fuel and Control - Replace Suspect Fuel Nozzles (23075904 and 23077006)

1 8 73-11-0018-Nov-13AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-73-086 Engine Fuel and Control - Rework the Fuel Pump and Metering Unit (23076368)

1 7 73-21-0018-Jan-10AE 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-73-087 Engine Fuel and Control - Rework the Fuel Pump and Metering Unit (23077658)

1 7 73-21-0009-Nov-09AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-73-088 Engine Fuel and Control - Replace the Fuel Pump and Metering Unit 106

1 3 73-21-0029-Mar-10AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-73-089 Engine Fuel and Control - New FADEC with Software Version B9.2 for the AE 3007A2 Engine

7 73-25-0021-Sep-10AE 7A2

3007A-73-090 Engine Fuel and Control - Install the High Speed ITT Trim Plug for the AE 3007A Series Engines

7 77-21-0010-Feb-14AE 7A1/1, 7A1/3

01-May-15Page 47 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-73-091 Engine Fuel and Control - Rework the Fuel Pump and Metring Unit (FPMU 106 to FPMU 108)

7 73-21-1015-Nov-13AE 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-73-092 Engine Fuel and Control - Reidentification of FADEC Assembly for the AE 3007A1 and AE 3007A1/3 Engines

7 73-25-00-0110-Feb-14AE 7A1, 7A1/3

3007A-73-093 Engine Fuel and Control - New FADEC with Software Version B9.4 for the AE 3007A2 Engine

8 73-25-0001-Aug-14AE 7A2

3007A-73-099 Engine Fuel and Control - Fuel Pump and Metring Unit, Tupe: FPMU 200

8 73-21-1021-Aug-14AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A2, 7A3

3007A-73-100 Engine Fuel and Control- Replacement of Piloted Flow Fuel Nozzles (23065950 and 23062915)

0 7 73-10004-Dec-14AE

3007A-74-001 Cancelled Prior to PublicationAE

3007A-74-002 Cancelled Prior to PublicationAE

3007A-74-003 Ignition - Permanent-Magnet Alternator-Stator and Rotor Inspection

1 8 74-11-0005-Oct-01AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-74-004 Superceded by AE 3007A-74-006 and AE 3007A-74-007

1 4 74-11-0017-Sep-02AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

01-May-15Page 48 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-74-005 Ignition - Permanent Magnet Alternator Rotor and Stator Inspection

5 8 74-11-0012-Oct-09AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-74-006 Ignition - Replace the Permanent Magnet Alternator Stator

3 3 74-11-0024-Oct-05AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-74-007 Ignition - Permanent Magnet Alternator Rotor Inspection

2 4 74-11-0001-May-06AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-74-008 Ignition - Permanent Magnet Alternator Rotor Inspection and Replacement

2(b) 74-11-0024-Feb-03AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-74-009 Ignition - New Ignition Exciter (23077617) and External Engine Indicating (EEI) Harness (23077618)

8 7 74-13-1013-May-13AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-74-010 Igniter - Replace the Igniter (23084762) with Tungsten Electrode

2 8 74-21-1025-Jun-12AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-75-001 Air - Improved Engine Bleed Control System4 5(b) 75-31-00-3016-Mar-01AE 7A

3007A-75-002 Cancelled Prior to PublicationAE

3007A-75-003 See AE 3007A-A-75-003AE

3007A-75-004 Superceded by AE 3007A-75-0153 4 75-33-00-0116-Oct-01AE 7A

3007A-75-005 See AE 3007A-A-75-005AE

3007A-75-006 Superceded by AE 3007A-75-0043 08-Sep-98AE

01-May-15Page 49 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-75-007 Cancelled Prior to PublicationAE

3007A-75-008 Air - New Service Bleed Manifold Adapter1 5(a) 75-31-00-0501-May-02AE 7A

3007A-75-009 Cancelled Prior to PublicationAE

3007A-75-010 Superceded by AE 3007A-75-0203 21-Dec-01AE

3007A-75-011 Cancelled Prior to PublicationAE

3007A-75-012 Superceded by AE 3007A-75-0151 75-33-0016-Oct-01AE

3007A-75-013 Air - New Compressor Variable Vane Torquetube System Assembly Hardware

1 5(b) 75-33-00-0115-Feb-10AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-75-014 Cancelled Prior to PublicationAE

3007A-75-015 Air - New Torquetube Assembly (23071270)1 8 75-33-0128-Jan-13AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-75-016 Air - Bleed Control Tube - Clamping2 5(b) 75-31-00-2523-Oct-01AE 7A, 7A1/1, 7A1

3007A-75-017 Air - Inspect the Torquetube Assembly (23069629)

8 75-33-0010-Apr-01AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-75-018 Air - Compressor Air Bleed Valve Assembly - Rework

7 75-31-0022-Mar-04AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-75-019 Air - New Compressor Acceleration Bleed Valve and Adapter Kit

7 75-31-0008-Feb-02AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

01-May-15Page 50 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-75-020 Air - New Start Bleed Control Valve Support Bracket and Inlet Flexible Tube

4 3 75-39-0005-Sep-06AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-75-021 Air - New Compressor Bleed Manifold Assembly

2 7 75-31-0027-Feb-07AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-75-022 Air - compressor Variable Geometry Inspection Using the Turnbuckle Length

1 2(b) 75-33-0007-Jul-03AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-75-023 Superceded by AE 3007A-75-0271 7 75-31-3028-Feb-05AE 7A, 7A1/1, 7A1/3, 7A1, A1E, 7A1P, 7A3

3007A-75-024 Superceded by AE 3007A-75-0335 8 75-31-0018-Oct-05AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-75-025 Air - New Customer-services Outer Manifold Attachment Bolts (MS9565-08)

1 8 75-31-0019-Jul-04AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-75-026 Air - Lockwire or Safety Cable the Customer-services Outer Manifold Attachment Bolts

1 7 75-31-0015-Aug-05AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

01-May-15Page 51 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-75-027 Superceded by AE 3007A-75-0372 8 75–31–3031-Jan-08AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-75-028 Cancelled Prior to PublicationAE

3007A-75-029 Air - Replace the Compressor Variable Geometry (CVG) Actuator, Type: VGA 200

7 75-33-1002-Aug-04AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-75-030 Air - Customer-services Outer Manifold - New Outer Bypass Duct Gasket (23079466)

5(b) 75-31-3006-Jan-05AE 7A1, 7A1/1, 7A1/3, 7A1E, 7A1P, 7A3

3007A-75-031 Air - New Compressor Variable Geometry Actuator (23079713)

7 73-13-0024-Mar-06AE 7A1, 7A1/1, 7A1/3, 7A1E, 7A1P, 7A3

3007A-75-032 Air - Remove the Lower-center-sump Buffer-exhaust-pipe Assembly (23073117) and Install the New Diffuser Coverplate (23080138)

1 3 72-39-0106-Aug-07AE 7A1, 7A1/1, 7A1/3, 7A1E, 7A1P, 7A3

3007A-75-033 Air - Customer-services Outer Manifold Inspection

1 8 75-31-0003-Aug-09AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-75-034 Air - Rework the Customer-services Core Manifold (23073458)

1 7 75-31-2007-Jun-10AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

01-May-15Page 52 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-75-035 Air - New CVG Actuating Cylinder Mounting Bracket (23084046)

1 4 72-30-0020-Oct-06AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-75-036 Air - Outer Bypass Duct - Customer-service Outer Manifold Molded Insert Inspection and Repair

1 4 75-31-3024-Nov-08AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-75-037 Air - New Outer Customer Services Manifold (23084756)

3 4 75-31-3012-Apr-10AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-75-038 Superceded by AE 3007A-75-0402 8 75-31-0019-Mar-08AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-75-039 Air - 14th-stage Compressor Discharge Air Tube Inspection

4 8 75-31-0009-Apr-15AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

R

3007A-75-040 Air - Left-hand Compressor Discharge Air Tube V-band Clamp Inspection

4 75-31-0019-Mar-08AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-75-041 Air - 14th-Stage Compressor Discharge Air Tube Bracket

2 8 72-39-0015-Sep-10AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

01-May-15Page 53 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-75-042 Air - Right-hand 14th-Stage Compressor Discharge Air Tube Inspection

8 75-00-0016-Mar-09AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-75-043 Air - New Angle Bracket ((MS9600-058) at the No. 11 Fuel Nozzle Location

7 79-27-0002-Mar-10AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-75-044 Air - New Center-sump Buffer-vent -air Tube Restrictor Plug (23091076)

3 8 75-21-0019-Aug-13AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A2, 7A3

3007A-76-001 Cancelled Prior to PublicationAE

3007A-76-002 Cancelled Prior to PublicationAE

3007A-76-003 Engine Controls - New Harness Routing and Clamping

3 4 76-11-0028-Sep-09AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-76-004 Cancelled Prior to PublicationAE

3007A-76-005 Engine Controls - External Engine Control (B) Harness Assembly - New Clamping

3 76-11-0014-Feb-02AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-76-006 Engine Controls - Install the Heat-Shrinkable Tubing around, or Tape the ITT Harness Connectors

2 5(b) 7628-Sep-09AE 7A, 7A1/1

01-May-15Page 54 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-76-007 Engine Controls - Install the Heat-Shrinkable Tubing around, or Tape the P2.5 Sensor Harness Connectors (For Engines That Do Not Have FADEC Software Version IV.2, VI.7, B4.3 or Subsequent Installed)

1 5(b) 7618-Jan-01AE 7A, 7A1/1

3007A-76-008 Engine Controls - Install the Heat-Shrinkable Tubing around, or Tape the P2.5 Sensor Connectors (For Engines That Have FADEC Software Version IV.2, VI.7, B4.3 or Subsequent Installed)

2 7 7602-Jul-01AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-76-009 Engine Controls - Spiral Wrap the External Engine Control Harnesses

7 76-11-0001-Mar-04AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-76-010 Engine Controls - Re-route External Engine Wiring Harnesses on Forward Lower Left Side of Engine

4 76-13-0011-Aug-08AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-76-011 Engine Controls - Electrical Connectors - Inspection and Wrapping

4 8 76-13-0012-Feb-15AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-77-001 Engine Indicating - Fan-Speed-Sensor Hole Plug

2 8 77-11-00-0510-Dec-98AE 7A

3007A-77-002 Superceded by AE 3007A-77-0041 13-Mar-98AE

01-May-15Page 55 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-77-003 Cancelled Prior to PublicationAE

3007A-77-004 Engine Indicating - Tighten the ITT Harness Connectors

1 2(b) 7711-May-98AE 7A

3007A-77-005 Cancelled Prior to PublicationAE

3007A-77-006 Superceded by AE 3007A-76-0061 13-Apr-00AE

3007A-77-007 Cancelled Prior to PublicationAE

3007A-77-008 Cancelled Prior to PublicationAE

3007A-77-009 Cancelled Prior to PublicationAE

3007A-77-010 Engine Indicating - New Quad Element N1 Speed Sensor (23076155 or 23087704)

1 7 77-11-0014-Nov-11AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-77-011 Engine Indicating - Examine the Vibration Sensors

3 77-41-0028-Nov-06AE 7A1E

3007A-77-012 Engine Indicating - Replace a Suspect Group of Thermocouple Wiring Harnesses (23059920 and 23059921)

4 77-21-0024-Nov-08AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-78-001 Cancelled Prior to PublicationAE

3007A-78-002 Exhaust - New Rear Turbine Bearing Support and Exhaust Cone Assembly

1 7 78-11-0028-Sep-09AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

01-May-15Page 56 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-78-003 Exhaust - New Core Flowpath Forced Mixer Support Assembly (23076313)

7 78-11-0009-Sep-03AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-78-004 Exhaust - New Forced Core-to-Bypass Mixer (23077972)

9 8 78-11-0027-Feb-12AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-78-005 Exhaust - New Forced Core-to-Bypass Mixer (23077972) with RTBS Heat Shields

8 78-11-0016-Jul-09AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-78-006 Superceded by AE 3007A-78-0071 8 78-11-0012-Aug-14AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-78-007 Exhaust - Forced Core-to-Bypass Mixer Inspection

8 78-11-0012-Aug-14AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-79-001 Cancelled Prior to PublicationAE

3007A-79-002 Oil - Oil Tank Vent Hole2 8 79-11-00-0519-Dec-13AE 7A

3007A-79-003 Oil - New Lube-and-Scavenge Pump 7 79-21-00-0108-Sep-97AE 7A

3007A-79-004 Oil - Replace the Oil-Level-and-Low-Oil-Warning Sensor

3 8 79-35-00-0122-Oct-01AE 7A

3007A-79-005 Cancelled Prior to PublicationAE

01-May-15Page 57 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-79-006 Oil - Rework the Fuel-Cooled Oil Cooler (FCOC)

2 3 79-33-00-0122-Oct-01AE 7A

3007A-79-007 Oil - Rework the Oil-Filter Unit2 7 79-23-00-0101-May-02AE 7A

3007A-79-008 Cancelled Prior to PublicationAE

3007A-79-009 Oil - Oil Tank Inspection For Operation with Increased MOP

1 2(b) 73-31-00-0113-Mar-98AE 7A

3007A-79-010 Oil - New Vent System Tubes (23065523 and 23065524)

5 8 79-27-00-7508-Jun-01AE 7A, 7A1/1, 7A1

3007A-79-011 See AE 3007A-A-79-011 12-Dec-97AE

3007A-79-012 Cancelled Prior to PublicationAE

3007A-79-013 Cancelled Prior to PublicationAE

3007A-79-014 See AE 3007A-A-79-014AE

3007A-79-015 Oil - Plug the Oil Tank Vent Hole4 4 79-11-10-0113-Nov-06AE 7A, 7A1/1, 7A1/2, 7A1

3007A-79-016 Cancelled Prior to PublicationAE

3007A-79-017 Oil - Inspect the Scavenge Oil Aft-Sump Rear and Forward Oil Scavenge Tubes

4 2(b) 79-27-00-1508-Jun-01AE 7A, 7A1/1, 7A1/3 7A1,7A1P, A3

3007A-79-018 Cancelled Prior to PublicationAE

3007A-79-019 Cancelled Prior to PublicationAE

3007A-79-020 See AE 3007A-A-79-020AE

01-May-15Page 58 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-79-021 Oil - New Center Sump Vent Tubes7 4 79-27-00-2028-May-13AE 7A, 7A1/1, 7A1/3, 7A1

3007A-79-022 Oil - Remove the Oil Tube (23061066)2 5(b) 79-27-00-2530-Nov-00AE 7A, 7A1/1, 7A1/3, 7A1

3007A-79-023 Superceded by AE 3007A-79-0262 01-Aug-00AE

3007A-79-024 Superceded by AE 3007A-79-0261 01-Aug-00AE

3007A-79-025 Oil - New Oil Tank Pressure Relief Kit2 5(b) 79-27-00-7524-Jul-06AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-79-026 Oil - New Oil Pressure Sensor (23073475)2 5(b) 79-31-00-0102-Jan-01AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-79-027 See AE 3007A-A-79-027AE

3007A-79-028 Oil - Inspect the Oil Pressure Sensor (23073475)

8 79-31-00-0111-Aug-00AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-79-029 Oil - New Oil Pressure Sensor (23073715)1 8 79-31-00-0107-Jul-03AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-79-030 Oil - New Aft Sump Oil Scavenge Tubes and Multiple Tube Support Bracket Assembly

1 3 79-27-0018-Jul-03AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-79-032 Cancelled Prior to PublicationAE

3007A-79-033 Superceded by AE 3007A-79-0341 8 79-21-1014-May-02AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

01-May-15Page 59 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-79-034 Oil - Oil Inspection for Debris 8 79-21-1014-May-02AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-79-035 Oil - Oil Pressure/Temperature Sensor Inspection

2 3 79-31-0005-Mar-07AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-79-037 Oil - New Low Oil-pressure Switch (23078098)2 3 79-33-1021-May-07AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-79-039 Oil - New Line Tee-to-accessory Gearbox Pressure Oil Tube (23080854)

2 3 79-00-0016-Oct-06AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-79-040 Oil - Air-cooled Oil Cooler (ACOC) Bolts (MS9556-18)

2 7 79-11-0017-Nov-08AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-79-041 Superceded by AE 3007A-79-0401 3 79-11-0016-Jul-07AE 7A, 7A1/3, 7A1E

3007A-79-042 Oil - New Accessory Gearbox Scavenge Outlet Screen (23086796)

8 79-21-1007-May-08AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-79-043 Oil - New Fuel Cooled Oil Cooler-to-line Tee Pressure Oil Tube (23086653)

7 79-00-0002-Sep-09AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-79-044 Oil - Change the Position of the Rear Turbine Bearing Support (RTBS) Aft Vent Tube Clamp

1 7 79-27-0027-Feb-12AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A2, 7A3

01-May-15Page 60 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-79-045 Oil - New Oil Tank Mounting Bracket (23090111)

8 79-11-0017-Nov-10AE 7A, 7A1/1, 7A1/2, 7A1/3, 7A1, 7A1E, 7A1P, 7A2, 7A3

3007A-A-72-034 Engine - Examine the Mid-Span Roller Bearing

1 8 72-00-63-0118-May-98AE 7A

3007A-A-72-044 Engine - 1st-to-2nd-Stage Turbine Spacer Life Limit Change

1 8 72-52-00-0113-May-13AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-A-72-058 Cancelled Prior to PublicationAE

3007A-A-72-099 Engine - Monitor the High Pressure Turbine Condition

4 8 72-51-0019-Sep-00AE 7A

3007A-A-72-105 Engine - 1st- and 2nd-Stage High Pressure Turbine Wheels - Life Limit Decrease

8 72-52-00-1029-Jan-99AE 7A

3007A-A-72-121 Superceded by AE 3007A-A-72-0992 17-Feb-99AE

3007A-A-72-122 Engine - Outer Bypass Duct Molded Insert Assembly Pull Test

3 8 72-73-00-0113-May-13AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-A-72-131 Superceded by AE 3007A-72-3217 8 72-63-00-0124-Feb-14AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-A-72-142 Engine - Fan Spinner Assembly - Inspection5 8 72-00-21-0523-Apr-07AE 7A, 7A1/1, 7A1/3, 7A1

01-May-15Page 61 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-A-72-143 Engine - Front Frame Assembly - Rework6 8 72-25-00-4023-May-05AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-A-72-152 Engine - Compressor Shaft Cone Assembly - Life Limit Decrease

8 72-35-00-0115-Jun-00AE 7A, 7A1/1, 7A1/3, 7A1

3007A-A-72-156 Engine - New Fan Teflon Lip Seal (23072308)4 8 72-25-00-2009-Apr-15AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

R

3007A-A-72-173 Engine - Inspect the Coating on the Stationary Labyrinth Seal (23057980)

8 72-25-00-0118-Apr-00AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-A-72-178 Engine - Reset the Inlet Guide Vanes3 8 72-37-00-0101-Dec-00AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-A-72-179 Engine - Acid Etch Inspection of the 2nd-Stage High-Pressure Turbine Wheel

3 8 72-52-00-1019-Jun-01AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-A-72-197 Engine - New Stationary Labyrinth Seal (23073906)

8 72-25-00-0101-Dec-00AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-A-72-201 Superceded by AE 3007A-72-2303 72-25-00-0105-Nov-01AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-A-72-207 Engine - New Fan Carbon Seal Internal Retaining Ring

2 8 72-25-00-3001-May-02AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-A-72-225 Engine - Monitor the High-Pressure Turbine 1st-Stage Vane Assembly

2 8 72-51-00-0116-Feb-04AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

01-May-15Page 62 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-A-72-265 Engine - 1st to 2nd-Stage High Pressure Turbine Spacer Inspection

3 8 72-52-0007-Nov-05AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-A-72-312 Superceded by AE 3007A-A-72-3131 8 72-53-0006-Jul-04AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-A-72-313 Superceded by AE 3007A-72-3142 8 72-53-0010-Aug-04AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-A-72-346 Engine - 2nd & 3rd-stage Compressor Wheels - Life Limit Decrease

8 05-12-0001-May-07AE 7A1E

3007A-A-72-367 Engine - 2nd-stage High Pressure Turbine Wheel - Eddy Current Inspection

2 8 72-52-0022-Jun-09AE All 7A Series

3007A-A-72-377 Engine - 2nd-stage High Pressure Turbine Wheel - Inspection Cycles

2 8 72-52-0009-May-11AE All 7A Series

3007A-A-72-386 Engine - 6th- thru 13th-Stage Chrome-carbide Coated and Uncoated Compressor Wheel Knife Edge Seals - Jentek Eddy Current Inspection

5 8 72-35-0015-Nov-11AE 7A, 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A2, 7A3

3007A-A-72-390 Engine - Inspection of 6th- thru 13th-Stage Compressor Wheel Circumferential Pocket Area

3 8 72-37-0027-Jun-11AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A2, 7A3

01-May-15Page 63 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-A-72-407 Engine - 1st and 2nd-stage High Pressure Turbine Wheel Life Limit Decrease

1 8 05-12-0029-Aug-14AE 7A1, 1/1, 1/3, A1P, A3, A2

3007A-A-72-408 Engine - High Pressure Turbine 2nd-Stage Wheel Bore Eddy Current Inspection

2 8 72-52-0029-Apr-15AE 7A1, A1/1, A1/3, A1E, A1P, A3

R

3007A-A-72-414 Engine - Unpeened or Partially Peened 2nd-stage High Pressure Turbine Wheel Life Limit Decrease

1 8 05-12-0005-Dec-12AE 7A1/1, 7A1/3, 7A1, 7A1E, 7A1P, 7A3

3007A-A-72-419 Engine - High Pressure Turbine 1st-stage Wheel Life Limit Decrease Due to Possible Steel Contamination

8 72-52-0018-Dec-13AE 7A1, A1/1, A1/3, A1E, A1P, A2, A3

3007A-A-73-012 Engine Fuel and Control - Examine the Fuel Manifold and Install Additional Clamps

8 73-13-00-3518-Apr-97AE 7A

3007A-A-73-014 Superceded by AE 3007A-73-0214 30-Nov-98AE

3007A-A-73-024 Engine Fuel and Control - N1/N2 Over-Speed Annunciation FADEC Self-Test - Inspection

2 8 73-25-10-0126-Apr-99AE 7A, 7A1/1

3007A-A-73-041 Engine Fuel and Control - Replace the FADEC

2 8 73-25-10-0123-Aug-00AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

3007A-A-75-003 Superceded by AE 3007A-A-75-0053 12-Dec-97AE

3007A-A-75-005 Air - Compressor Variable Geometry System Dynamic Pressure Test

2 8 75-33-00-0119-Feb-98AE 7A

3007A-A-79-011 Superceded by AE 3007A-A-79-0141 27-Dec-97AE

01-May-15Page 64 of 65

Section 1

SB No. Title DateRev No. ComplianceCategory

Moduleor

ATALocator

AE SERIES PROPULSION SYSTEMService Bulletin Index

LIST OF AE 3007A SERIES SERVICE BULLETINS

ModelsAffected

3007A-A-79-014 Oil - Inspection for Center Sump Oil Debris4 8 79-21-10-0114-Apr-98AE 7A

3007A-A-79-020 Oil - Monitor the Engine Oil Temperature 8 79-3108-Jan-99AE 7A, 7A1/1, 7A1

3007A-A-79-027 Superceded by AE 3007A-79-0332 8 79-21-10-0121-Mar-02AE 7A, 7A1/1, 7A1/3, 7A1, 7A1P, 7A3

01-May-15Page 65 of 65

Section 1