Roller Table Motors (High Efficiency)

Suitable for VFD application

Specially designed for severe applications such as laminators

WEG has a wide range of electric motors specially designed to meet each application requirements.

WEG has developed an advanced system for Roller Table operation with a low maintenance motor, built with FC200 gray iron, specially designed to meet Siderurgy’s severe requirements.

Advantages:

• High Efficiency Motor for better performance and energy consumption reduction.

• Sealing system W3 Seal, highly effective against both water and dust accumulation and entrance.

• Double sealing on conduit box cover and terminal box.

• Exclusive WISE insulation system (WEG Insulation System Evolution), with WEG GIII 200ºC enameled wire designed for aggressive environments where humidity is constant. Suitable for VFD application.

• Double impregnation with water base varnish. (Environmentally friendly).

Roller Table Motors (High Efficiency)

Features:• Frames: 132M, 160L, 180M, 200L and 225S/M**• Class of Insulation: “H”• Double sealing with cable glands • Terminal Block• Thermistors PT-100 / Thermostat (optional)

**Other frames under request

Advantages:

• Special internal paint for environments with excessive presence of steam and external paint with Polyurethane finishing (painting plan 204), preventing against corrosion and increase motor’s life.

• Shaft, fixing bolts and nameplate made of stainless steel, suitable for areas with excess of water and steam, corrosion resistant.

• Radial and circular fins preventing against accumulation of material and water on the motor.

Roller Table Motors (High Efficiency)