ReliaMark roller chain is produced to meet stringent

quality specifications for materials and workmanship, en-

suring that chain length, heat treatment and tensile strength

are uniform and consistent. ReliaMark roller chain is

manufactured from carbon steel to meet or exceed ANSI

B29.1 standards. Components are case-hardened for wear

resistance and through-hardened for toughness. To select

ReliaMark roller chain according to ANSI size or pitch,

please refer to the chart on the back of this sheet.

ReliaMark products are distributed exclusively

through Kaman Industrial Technologies. For more detailed

information, visit reliamark.net. For help cross-referencing

replacement products, or for assistance with specifying

roller chain by working load and application, contact your

local Kaman Industrial Technologies sales representative at

800-526-2626 or visit www.kamandirect.com.

ReliaMark® offers standard-duty roller chain in ANSI sizes ranging from #35 through #120 in both single- and double-strand configurations. Each size isavailable in packaged lengths of 10, 50 and 100 feet.The quality and reliability of our roller chain offer MRO customers a high-value alternative for general-duty applications.

Roller Chain –ANSI

Standard-duty Roller Chain,Above-standard Performance

Visit www.reliamark.net

Your local ReliaMark distributor:

(800) 526-2626 www.kamandirect.com

Distributed exclusively by

35RIV-100FT-RM 35 0.38 3/16 *.200 0.141 0.050 0.56 0.50 0.210 1760

35RIV-50FT-RM 35 0.38 3/16 *.200 0.141 0.050 0.56 0.50 0.210 1760

35RIV-10FT-RM 35 0.38 3/16 *.200 0.141 0.050 0.56 0.50 0.210 1760

35-2RIV-50FT-RM 35-2 0.38 3/16 *.200 0.141 0.050 0.96 0.90 0.399 0.450 3520

35-2RIV-10FT-RM 35-2 0.38 3/16 *.200 0.141 0.050 0.96 0.90 0.399 0.450 3520

40RIV-100FT-RM 40 0.50 5/16 0.312 0.156 0.060 0.72 0.67 0.410 3125

40RIV-50FT-RM 40 0.50 5/16 0.312 0.156 0.060 0.72 0.67 0.410 3125

40RIV-10FT-RM 40 0.50 5/16 0.312 0.156 0.060 0.72 0.67 0.410 3125

40-2RIV-100FT-RM 40-2 0.50 5/16 0.312 0.156 0.060 1.29 1.24 0.566 0.800 6250

40-2RIV-50FT-RM 40-2 0.50 5/16 0.312 0.156 0.060 1.29 1.24 0.566 0.800 6250

40-2RIV-10FT-RM 40-2 0.50 5/16 0.312 0.156 0.060 1.29 1.24 0.566 0.800 6250

50RIV-100FT-RM 50 0.63 3/8 0.400 0.200 0.080 0.89 0.83 0.680 4880

50RIV-50FT-RM 50 0.63 3/8 0.400 0.200 0.080 0.89 0.83 0.680 4880

50RIV-10FT-RM 50 0.63 3/8 0.400 0.200 0.080 0.89 0.83 0.680 4880

50-2RIV-50FT-RM 50-2 0.63 3/8 0.400 0.200 0.080 1.60 1.55 0.713 1.320 9760

50-2RIV-10FT-RM 50-2 0.63 3/8 0.400 0.200 0.080 1.60 1.55 0.713 1.320 9760

60RIV-100FT-RM 60 0.75 1/2 0.469 0.234 0.094 1.11 1.04 0.990 7030

60RIV-50FT-RM 60 0.75 1/2 0.469 0.234 0.094 1.11 1.04 0.990 7030

60RIV-10FT-RM 60 0.75 1/2 0.469 0.234 0.094 1.11 1.04 0.990 7030

60-2RIV-50FT-RM 60-2 0.75 1/2 0.469 0.234 0.094 2.01 1.94 0.897 1.950 14060

60-2RIV-10FT-RM 60-2 0.75 1/2 0.469 0.234 0.094 2.01 1.94 0.897 1.950 14060

80RIV-100FT-RM 80 1.00 5/8 0.625 0.312 0.125 1.44 1.32 1.730 12500

80RIV-50FT-RM 80 1.00 5/8 0.625 0.312 0.125 1.44 1.32 1.730 12500

80RIV-10FT-RM 80 1.00 5/8 0.625 0.312 0.125 1.44 1.32 1.730 12500

80-2RIV-50FT-RM 80-2 1.00 5/8 0.625 0.312 0.125 2.59 2.47 1.153 3.370 25000

80-2RIV-10FT-RM 80-2 1.00 5/8 0.625 0.312 0.125 2.59 2.47 1.153 3.370 25000

100RIV-100FT-RM 100 1.25 3/4 0.750 0.375 0.156 1.73 1.61 2.510 19530

100RIV-50FT-RM 100 1.25 3/4 0.750 0.375 0.156 1.73 1.61 2.510 19530

100RIV-10FT-RM 100 1.25 3/4 0.750 0.375 0.156 1.73 1.61 2.510 19530

100-2RIV-50FT-RM 100-2 1.25 3/4 0.750 0.375 0.156 3.14 3.02 1.408 4.910 39060

100-2RIV-10FT-RM 100-2 1.25 3/4 0.750 0.375 0.156 3.14 3.02 1.408 4.910 39060

120RIV-50FT-RM 120 1.50 1 0.875 0.437 0.187 2.14 2.00 3.690 28125

120RIV-10FT-RM 120 1.50 1 0.875 0.437 0.187 2.14 2.00 3.690 28125

120-2RIV-50FT-RM 120-2 1.50 1 0.875 0.437 0.187 3.93 3.79 1.789 7.350 56250

120-2RIV-10FT-RM 120-2 1.50 1 0.875 0.437 0.187 3.93 3.79 1.789 7.350 56250

* Chains are rollerless — dimension shown is bushing size

Dimensions are in inches and pounds

Link Minimum Part ANSI Pitch Roller Roller Pin Plate Weight Tensile

Number Number Inches Width Diam. Diam. Thickness C R K per foot Strength

Standard-DutyRoller ChainBuilt in accordance withANSI B29.1.

C

R

ROLLERWIDTH

ROLLERDIAMETER

PITCH

C

K

R

ROLLERWIDTH

ROLLERDIAMETER

PITCH

FORM # 70313 ©2009 Kaman Industrial Technologies Corporation. All rights reserved.

Single-Strand

Double-Strand