RODE-529009-15K-ND

7/29/2019 RODE-529009-15K-ND

http://slidepdf.com/reader/full/rode-529009-15k-nd 1/17

Rotary Oilfield Drilling Equip. Intl., Inc. A leading supplier of products and services for the oil field worldwide

35407 SH 249, Pinehurst, Tx. USA 77362Tel: 832.934.1277 Fax: 832.934.1278 Email: [email protected]

www.drillrigsintl.com

1500 HP. SCR DRILLING RIG PACKAGE

We are pleased to quote the following equipment for your consideration:

MAST

One (1) Full Circle-on-the-floor cantilever beam leg drilling mast with a maximum clear height of 152’-0” x 25’-0” wide base and a rated static hook load of 770,000#on ten (10) lines strung to the travelingblock per API 4F specifications. Mast is designed for 80 mph wind load with a full rack of pipe and 105mph on a bare mast. Mast stem portal truss designed affording excellent driller’s view and is completewith raising sheaves and A-frames. Mast has full height straight ladder drill floor to crown and includesthe following additional equipment:

One (1) slingline equalizer unit complete with hanger plate welded in mast to stow the slingline when notin use.

One (1) set each front and rear shoes.

One (1) set of four (4) standpipe clamps for single 5” standpipe.

One (1) Full Circle flat-running crown block with six (6) 50” minimum diameter cluster sheaves and one

(1) 60” minimum diameter fastline assembly, all with tapered roller bearings and grooved for 1-3/8”diameter wireline.

Cluster sheaves are mounted on a crown frame so flat face of traveling block faces derrickman. Crownframe includes wireline guards, bumper blocks and pad eyes for hanging, catline and air hoist sheaves.Includes crown safety platform for crown service with 3’-6” high with zerks located handrails andexpanded metal flooring. Each sheave is lubricated by individual grease channels on one end of the shaft.

One (1) Full Circle heavy-duty racking platform with a capacity for 18,000 ft. of 5” drill pipe, four (4)stands of 10” drill collars and ten (10) stands of 8” drill collars. Platform is complete with folding divingboard, access catwalk and fold-up floor slab for driller’s side. Platform is adjustable from 82’-0” to 87’-0” above drill floor and includes 3’-6” high handrails.

Two (2) air hoist sheave units – 14” OD steel sheave grooved for 5/8” diameter wireline and mounted onroller bearings.

Two (2) counterweight systems with buckets, guides, tracks, load lines and 6” snatch block

HYDRAULICALLY RAISED SUBSTRUCTURE:

7/29/2019 RODE-529009-15K-ND





SCOPE OF SUPPLY:

One (1) hydraulically raised substructure configured to support the above on floor mast, with a nominalbase dimension at the mast shoes of 25’-0” and a static hook load of 770,000#.

The substructure is designed to allow for installing of the mast on the drill floor while the substructure isin the low position and raising the mast to its working position prior to raising the substructure.

Includes a parallelogram type, raising system powered by two (2) hydraulic winches operating two(2) setsof six (6) part raising lines, one (1) hydraulic power unit complete with remote control panel, gauges,hoses and fittings and two (2) hydraulic break-over rams.

All critical load-carrying members are fabricated form hi-strength steel (w/min. yield strength of 50 ksi).

All fabrication procedures/welding is performed in accordance with API 4F specifications incorporatingAWS and AISC recommendations.

Nominal Dimensions: Width: 31’ - 2 1/2 “Height: 30’Length: 54’

Capacities: Dead Load of Mast: 170,000 lbsCasing Load: 770,000 lbsSetback Load: 577,000 lbs

Wind Load (Bare Structure): 100 mphWind Load (w/Full Setback): 73 mph

The substructure is complete with:

Vee Door: One (1) Vee Door ramp and stair x 30 high. Ramp is 5’-0” wide. Includesheavy-duty pipe rails on pipe ramp sides

Stairways: Two (2) 30’-0” high units at rear of substructure with landing, handrails andserrated grating treads,One (1) 30’-0” high unit at Dog House, substructure with landing, handrails andserrated grating treads, with rollers for erection with the substructure.

Flooring: One (1) lot of ¼” thick checkered plate flooring (3/8” thick around rotary table)and sub-floor frames as required.

Handrails: One(1) lot of 3’-6” high handrails with toe boards and safety chain guards at stairopenings, around the perimeter of the drill floor.

Mast Stand One mast stand 15’-0” high

7/29/2019 RODE-529009-15K-ND





One (1) FCE Deadline Anchor

Dog House supports: One set dog house supports for customer furnished dog house

Coatings: The substructure and fabricated accessories will be sandblast cleaned to the paintmanufactures recommendation and painted with an industrial primer and topcoated with industrial enamel. Top coat color to be selected by customer.

DRAWWORKS

1500 HP, draw works Grooved for 1-3/8” (RECONDITIONED)

Electric Motor: GE-752-DC- 800 hp. Series drawworks motor with 10 hp. blower motor.

Electric Motor: GE-752 DC- 800 hp. Series drawworks motor with 10 hp blower motor.

Brakes: Elmago Baylor 6032, Eddy Current Brake W/ Control System Nominal Torque Capacity @ 50Rpm

PRIME MOVERS

(3) ea. Caterpillar 3512-1477 hp engines. Generator sets with 1365 KW. Generators Mounted on oilfieldskid with tail board loading either end.

SCR SYSTEM

(3) Engine X 4 Bay series SCR system complete with all auxiliary equipment connections and generator switch boards with accommodation for Top Drive module drive system.

ROTARY TABLE

Nat/Oilwell 27-1/2”, 500 Ton, 0-200 Rpm Variable, With 3.842:1 Speed Ratio, 30,000 Ft. #@ 60Rpmwith GE-752 - 800 HP hi-torque motor and 10 hp blower motor..

SWIVEL

500 Ton Capacity swivel.

MASTER BUSHING

Varco Mod. MSPC 27-1/2” With no. 3 Insert Bowl

KELLY

7/29/2019 RODE-529009-15K-ND





With upper and lower Kelly cocks (Kelly valves)

(1) 5-1/4” x 3-1/4” x 40’ Long, Hexagon Kelly,

PIPE SPINNER

International Type 30/JT Oil Field

KELL Y SPINNER

Model A6C International Tool Co/JT Oil Field..

KELL Y BUSHING

Model 27-HDP Varco

MUD SYSTEM (3 TANKS APPROXIMATE 1400 BBLS.)

(2) ea. Triplex 1300 hp with Two (2) GE-752- 800 hp. series motors mud pump motor rear mounted onoilfield skid.

CHARGING PUMPS

(2) Mission Model Magnum, 8 x 6 x 11 with 50 hp Electric Motors, 230/460 Volt

MUD MIXING PUMPS

(2) Mission Model Magnum, 8 x 6 x 13 with 100 hp Electric Motors, 230/460 Volt

MUD TANKS:

SHAKER TANK

(1) ea. 40 L x 8’ W x 8’ High 400 BBL with porch

INTERMEDIATE TANKS:

(1) ea.-40’L x 8’ High x 8’ wide 400 BBL with porch

SUCTION TANK:

7/29/2019 RODE-529009-15K-ND





(1) ea.40 L-x 8’ft W’ x 8’ High, 400 BBL with porch

TRIP TANKS

(1) 50 BBL Capacity With 3”x 4”transfer Pump X 20 hp.

PILL TANK:

(1) 50 BBL Capacity Slug Pit

SHALE SHAKER

(2) Height Speed Linear Motion,

DESANDER-DESILTER

(1) With 16 x 4” De-silter Cones and (2) 10”in cone De-sand 6 x 8 centrifugal pump(2) ea 100 hp. motors 460 volt 3 phase.

DEGASSER

(1) Swaco, Model Horizontal Vacuum, 5 hp.60 Hz, 230/460 Volts

WATER TANK

(1) Drinking water tank 300 bbl with (2) ea. transfer pumps 2” x 3” with 10 hp electric motorsskid mounted on oilfield skid.

DIESEL TANK

(1)300 bbl diesel tank with (2) ea. transfer pumps 1.5” x 2” with 5 hp electric motors skidmounted on oilfield skid.

CLOSING UNIT

Koomey, Type 80 Unit, 260 Gal. Capacity with 16 Bottle, 14 Outlets, And Auxiliary Air Remote controlunit

(2) Air pumps and (1) triplex 3000 psi pump with 20 hp. motor. Dual Remote control panels

CHOKE AND KILL LINE

7/29/2019 RODE-529009-15K-ND





2 Ea: Gate Valve, 3-1/16" 10,000 PSI WP, Flocon type "BWH" flanged ends, BX-154, hydraulic

operated, SSRG2 Ea: Gate Valve, 3-1/16" 10,000 PSI WP, Flocon type "BWH" flanged ends, BX-154, hydraulicoperated, SSRG

4 Ea: Gate Valve, 3-1/16" 10,000 PSI WP, Flocon type "BW" flanged ends, BX-154, handwheeloperated, SSRG

KILL L INE, TOP

4 Ea: Gate Valve, 3-1/16" 10,000 PSI WP, Flocon type "BW" flanged ends, BX-154, handwheeloperated, SSRG

4 Ea: Gate Valve, 3-1/16" 10,000 PSI WP, Flocon type "BWH" flanged ends, BX-154, hydraulicoperated, SSRG

4 Ea: Check Valve, 3-1/16" 10,000 PSI, "Flocheck", flanged ends, BX-154, SSRG mc "EE"

KILL L INE, BOTTOM

8 Ea: Gate Valve, 3 -1/16" 10,000 PSI WP, Flocon type "BW" flanged ends, BX-154, handwheeloperated, SSRG

8 Ea: Check Valve, 3-1/16" 10,000 PSI, "Flocheck", flanged ends, BX-154, SSRG mc "EE" BX-154,SSRG

4 Ea: Flanged Tee, 3-1/16" x 3-1/16" x 3-1/16", 10,000 PSI bx-154, SSRG88 Ea: Sets (8 Pcs per set) stud with two hex nuts 1" x 7-1/4" ASTM A13/194, GRB7/GR2H, CAD

plated100 Ea: Ring Gasket, cad plated, bx-154

DOUBLE STUDDED ADAPTER

10 Ea: Adapter, double studded, 4-1/16" 10,000 (BX-155) x 3-1/16" 10,000 PSI(BX-154), SSRG

CHOKE AND KILL LINE

3 Ea: Gate Valve, 3-1/16" 10,000 PSI WP, Flocon type "BW" flanged ends, bx-154, handwheeloperated, SSRG

2 Ea: Gate Valve, 3-1/16" 10,000 PSI WP, Flocon type "BWH" flanged ends, bx-154, hydraulic

operated, SSRG2 Ea: Check Valve, 3-1/16" 10,000 PSI, "Flocheck", flanged ends, BX-154, SSRG mc "EE"

CHOKE MANIFOLD

7/29/2019 RODE-529009-15K-ND





1 Ea: 3-1/16" 10,000 PSI WP choke manifold, consisting of the following:

(18) 3" 10k gate valves(1) 2" 10k gate valve(2) 3" 10k adjustable choke(1) 3" 10k hydraulic choke(1) Remote control HYD choke console(1) Studded instrument block w/ gage & sensor(1) Studded cross, 5-way(1) Studded tee(1) Buffer tank(1) Adapter spool, studded(2) Spacer spools(1) Lot..misc flanges

(1) Lot..studs/nuts, gaskets(1) Heavy duty oilfield skid, adjustable

BOP’s (13-5/8” 10,000 PSI):

1 Ea: Blow Out Preventer, Annular, Control Flow Type “GK”13-5/8” 5,000 PSI WP (BX-160) studded top X 13-5/8” 10,000 PSI (BX-159) flanged bottom316 SS line ring grooves, H2S screwed head designComplete with nitrile element

1 Ea: Blow Out Preventer, Single Ram, Control Flow type "U"13-5/8" 10,000 PSI WP (BX-159) flanged top13-5/8" 10,000 PSI WP (BX-159) flanged bottom

Two (2) 4-1/16" 10,000 PSI (BX-155) side outlets316 SS lined ring grooves, H2S serviceC/W handwheels, "U" joints and stem assemblies

2 Ea: Blind Flange, 4-1/16" 10,000 PSI WP, BX-1552 Ea: Ring Gasket, CAD plated, BX-1552 Ea: Sets (8 Pcs per set) stud with two hex nuts 1-1/8" X 8-1/2" ASTM A193/194, GRB7/GR2H, CAD

plated1 Ea: Blow Out Preventer, Double Ram, Control Flow Type "U"

13-5/8" 10,000 PSI WP (BX-159) flanged top13-5/8" 10,000 PSI WP (BX-159) flanged bottomFour (4) 4-1/16" 10,000 PSI (BX-155) side outlets

316 SS lined ring grooves, H2S serviceC/W handwheels, "U" joints and stem assemblies

4 Ea: Blind Flange, 4-1/16" 10,000 PSI WP, BX-1554 Ea: Ring Gasket, CAD plated, BX-1554 Ea: Sets (8 Pcs per set) stud with two hex nuts 1-1/8" X 8-1/2" ASTM A193/194, GRB7/GR2H, CAD

plated

7/29/2019 RODE-529009-15K-ND





LARGE BORE SHEAR BONNETS

1 Ea: Bonnet Assembly, Left, 614498-011 Ea: Bonnet Assembly, Right, 614498-021 Ea: Upper Ram Assembly, 40748-011 Ea: Lower Ram Assembly, 40748-024 Ea: Blade Packer, 44435-01-00-012 Ea: Packer for Upper Ram, 46751-01-00-012 Ea: Packer for Upper Ram, 46752-01-00-012 Ea: Packer for Lower Ram, 46751-01-00-012 Ea: Packer for Lower Ram, 46752-01-00-011 Ea: Set..2 Pcs Per Set..Pipe Rams 7"

1 Ea: Set..2 Pcs Per Set..Pipe Rams 9-5/8"1 Ea: Set..2 Pcs Per Set..Pipe Rams, Blind

STAND PIPE MANIFOLD:

4” dual stand pipe manifold with goose necks with Kelly hose connection (1) 55’ft.3.5x 7500 psi rotary hose 5 ea. 4”in 5K mud gate valves 3 ea 2”mud gate valve out lets x 5K.

AIR COMPRESSOR

2 Quincy 50 hp units with air driers 125 PSI WP

(1) Cold start compressor with diesel engine with electric starter.

WIRE LINE UNIT

Hoist Driven By 15 HP Elec. Motor W/ 15,000’ .092 OD Line with Depth Recorder

CATWALK

(2) ea. approximately 25 ft x 5 ft x 3 ft High

AIR TANKS

(2) ea. 200 gallon fitted in substructure (1) 200 gallon air tank in compressor house:

TOOL HOUSE

(1) Parts and Supply House 30’ x 10’ x 8’

7/29/2019 RODE-529009-15K-ND





DOGHOUSE (New)

(1) Doghouse 20’ x 10’ x 8’

DRILLING LINE:

7500’ft.drilling wire rope 1-3/8 IWRC on steel reel, Union Wire Rope Co

RIG WIRING:

All fixtures explosion proof within 50 ft of well bore

.DRILLERS CONSOLE:

Drilling / Mud watch system complete with gauges and recorders ,pressure , torque, mud volume, spm,rpm, weight, flow, drill rate , etc.

MAINTENANCE TOOLS

2 ea. Tool boxes for mechanics

2 ea. Tool boxes for electricians

2 ea. Sets hand tools for rig floor:

DRILL PIPE AND DRILL COLL ARS

17 000 ft. 5” RG G-105 19.50 lb./ft. NC-50 HB and IPC 6-5/8 X 12” box 9” pinnew Koppel steel USA pipe.

3000 ft 3-1/2” 13:30 lb per ft. grade S-135 HB and IPC New Smith Industries USA

30 ea Joints 6-3/4 Drill collars NC-46 Spiral. Slip recess only

40 ea Joints 5” Hevi-Wate Drill Pipe

30 ea Joints 4-3/4” in Drill collars NC-38 Spiral slip recess only

30 ea Joints 3-1/2” Hevi-Wate Drill Pipe

9 ea Joints 8” in Drill collars 6-5/8 Reg. Spiral Slip recess only

7/29/2019 RODE-529009-15K-ND


7/29/2019 RODE-529009-15K-ND





Qty . SUBS

2 Top Drive Saver Subs for a Varco TDS11 Assembly

7-3/8"OD x 3-1/16"ID w/6-5/8" Reg Pin x 4-1/2"IF Pin

7" long Shoulder/Sh (16-1/2"OAL)

1 Kelly Saver Sub 6-1/2"OD Body w/2-13/16"ID

w/4-1/2"IF Box up x Pin Down, complete w/Rubber

Saver Sleeve Installed. 36"OAL

3 Lift Sub w/6-5/8"OD Top Upset & 18 degree taper

turned to run w/5" Drill Pipe Elevators w/9"OD Bottom

Upset & 7-5/8" Reg Pin Down, 36"OAL


turned to run w/5" Drill Pipe Elevators w/8"OD Bottom

Upset & 6-5/8" Reg Pin Down, 36"OAL


turned to run w/5" Drill Pipe Elevators w/6-1/2"OD

Bottom Upset & 4-1/2"IF Pin Down, 36"OAL


turned to run w/3-1/2" Drill Pipe Elevators w/4-3/4"OD

Bottom Upset & 3-1/2"IF Pin Down, 36"OAL

2 X-Over Subs 9"OD w/8"OD Neck (24"lg) x 2-13/16"ID

w/6-5/8" Reg Box up w/Boreback x 7-5/8" Reg Pin down

w/Stress Relief Groove, 48"OAL

2 X-Over Subs 9"OD w/6-1/2"OD Neck (24"lg) x 2-13/16"ID

w/4-1/2"IF Box up w/Boreback x 7-5/8" Reg Pin down


7/29/2019 RODE-529009-15K-ND





Qty. SUBS

2 X-Over Subs 8"OD w/6-1/2"OD Neck (24"lg) x 2-13/16"ID

w/4-1/2"IF Box up w/Boreback x 6-5/8" Reg Pin down


2 X-Over Subs 6-1/2"OD x 4-3/4"ODNeck (24"lg) x 2-11/16"ID

w/3-1/2"IF Box up w/Boreback x 4-1/2"IF Pin down


1 X-Over Subs 4-3/4"OD x _____" Neck (18"lg) x _____"IDof w/3-1/2"IF Box up w/Boreback x 4-1/2" EUE, 3-1/2"EUE,

each 2-7/8" EUE or 2-3/8" EUE 8R Tubing Pin Conns, 36"OAL

2 Bit Sub 9"OD x 3"ID w/7-5/8" Reg Box up w/Boreback x

7-5/8" Reg Box down w/5F6R Float bore, 36"OAL

2 Bit Sub 8"OD x 2-13/16"ID w/6-5/8" Reg Box up w/Boreback

x 6-5/8" Reg Box down w/5F6R Float bore, 36"OAL

2 Bit Sub 6-1/2"OD x 2-13/16"ID w/4-1/2"IF Box up w/Boreback

x 4-1/2" Reg Box down w/4R Float bore, 36"OAL

2 Bit Sub 4-3/4"OD x 2"ID w/7-5/8" Reg Box up w/Boreback x

7-5/8" Reg Box down w/2F3R Float bore, 36"OAL

1 Integral Circulating Sub 6-5/8"OD w/2" Figure 1502 Union

Female Thread up x 4-1/2"IF Pin down, 15"OAL

(Rated f/10,000 PSI W.P.)

1 Integral Circulating Sub 5"OD w/2" Figure 1502 UnionFemale Thread up x 3-1/2"IF Pin down, 15"OAL

(Rated f/10,000 PSI W.P.)

7/29/2019 RODE-529009-15K-ND





Qty. Integral Blade Stabilizers

2 26" Hole Size String Type w/9"OD Necks & 3"ID

w/7-5/8" Reg Box up w/Boreback x Pin down w/Stress

Relief Groove, 107"OAL

1 26" Hole Size Near Bit Type w/9"OD Necks & 3"ID

w/7-5/8" Reg Box up w/Boreback x Box down w/5F6R

Float Bore, 107"OAL

2 17-1/2" Hole Size String Type w/9"OD Necks & 3"ID



1 17-1/2" Hole Size Near Bit Type w/9"OD Necks & 3"ID



2 16" Hole Size String Type w/9"OD Necks & 3"ID



1 16" Hole Size Near Bit Type w/9"OD Necks & 3"ID



4 12-1/4" Hole Size String Type w/8"OD Necks & 2-13/16"

ID w/6-5/8" Reg Box up w/Boreback x Pin down w/Stress


2 12-1/4" Hole Size Near Bit Type w/8"OD Necks & 2-13/16"

ID w/6-5/8" Reg Box up w/Boreback x Box down w/5F6R


7/29/2019 RODE-529009-15K-ND





Qty. Integral Blade Stabilizers (CONT’D)

4 8-1/2" Hole Size String Type w/6-1/2"OD Necks & 2-13/16"ID w/4-1/2" IF Box up w/Boreback x Pin down w/Stress

2 8-1/2" Hole Size Near Bit Type w/6-1/2"OD Necks &

2-13/16"ID w/4-1/2"IF Box up w/Boreback x 4-1/2" Reg

Box down w/4R Float Bore, 67"OAL

4 5-7/8" to 6-1/8" Hole Size String Type w/4-3/4"OD Necks

& 2-1/4"ID w/3-1/2"IF Box up w/Boreaback x Pin down

w/Stress Relief Groove 64"OAL

2 5-7/8" to 6-1/8" Hole Size Near Bit Type w/4-3/4"OD Necks

& 2"ID w/3-1/2"IF Box up w/Boreaback x 3-1/2" Reg Box

down w/2D3R Float Bore, 60"OAL

Qty. INTEGRAL DRILL PIPE PUP JOINTS

To Run with 5" Drill Pipe Elevators - 6-5/8"OD Tool

J oints, 3-1/4"ID (for 19.5#Grade G) or 2-3/4"ID (for

19.5#Grade S) w/4-1/2"IF Box x Pin Conns.

2 5ft long Shoulder/Shoulder



To Run with 3-1/2" Drill Pipe Elevators - 5"OD Tool J oints, 2-7/16"ID (for 13.30#Grade G) or 2-1/8"ID (for

13.30#Grade S) w/3-1/2"IF Box x Pin Conns.


7/29/2019 RODE-529009-15K-ND


7/29/2019 RODE-529009-15K-ND





Qty. Model 60 Type Roller Reamers - Body furnished with

TCI Wear Protection*

1 28" Hole Size w/9"OD Necks, Near Bit Type w/7-5/8"

Reg Box up w/Boreback x 7-5/8" Reg Box down, bored

for a 5F6R Float. Dressed w/Q Cutters 122"OAL

2 28" Hole Size w/9"OD Necks, String Type w/7-5/8"

Reg Box up w/Boreback x 7-5/8" Reg Pin down w/StressRelief Groove. Dressed w/Q Cutters 122"OAL

1 22" Hole Size w/9"OD Necks, Near Bit Type w/7-5/8"

Reg Box up w/Boreback x 7-5/8" Reg Box down, bored

for a 5F6R Float. Dressed w/Q Cutters 122"OAL

2 22" Hole Size w/9"OD Necks, String Type w/7-5/8"

Reg Box up w/Boreback x 7-5/8" Reg Pin down w/Stress

Relief Groove. Dressed w/Q Cutters 122"OAL

2 17-1/2" Hole Size w/9"OD Necks, Near Bit Type

w/7-5/8" Reg Box up w/Boreback x 7-5/8" Reg Box down, bored

bored for a 5F6R Float. Dressed w/Q Cutters 112"OAL

4 17-1/2" Hole Size w/9"OD Necks, String Type w/7-5/8"

Reg Box up w/Boreback x 7-5/8" Reg Pin down w/Stress

Relief Groove. Dressed w/Q Cutters 112"OAL

* The TCI Wear Protection consists of a pattern of

drilled holes with Tungsten Carbide Inserts pressed into

them. They are positioned at 3 intervals at 120 degreesapart, on the leading edge of the crown. The feature helps

slow down the wear on the bottom end of the crown.

7/29/2019 RODE-529009-15K-ND





Casing Scrapers & Spare Parts:

2 Ea: Logan Full Circle Scraper Complete with Blades to Scrape 4-1/2” OD 9.5-15.1 lbs., 4-3/4” OD 16-18 lbs., and 5” 13-26.7 lbs. Casing, 3.69” Minimum ID. 4.68” Maximum ID,with 3-1-/16” OD Fishing Neck, furnished with 2-3/8” API Regular Pin Top and BoxBottom Connections, 3-9/16” OD (Main Body, Retainer Rings) and with a 1” ID.

2 Ea: Logan Full Circle Casing Scraper Complete with Blades to Scrape 7” OD, 17-38#Casingand furnished with 3-1/2” API Regular Box Top and Box Bottom Connections.

2 Ea: Logan Full Circle Casing Scraper Complete with Blades to Scrape 9-5/8” OD 32.3-53.5lbs. Casing and furnished with 4-1/2” Regular Box and Box Connections.

4 Ea: 3-9/16” OD Mandrel furnished with 2-3/8” API Regular pin top and box bottomconnections. F/Logan Casing Scraper

4 Ea: Mandrel, 5-3/8” OD and furnished with 3-1/2” API Regular top and box bottomconnections. F/Logan 7” Casing Scraper

4 Ea: Mandrel, 7-1/2” OD and furnished with 4-1/2”API Regular pin top and box bottomconnections. F/Logan Scraper

6 Ea: Blades for 4-1/2” OD, 9.5-15.1#Casing and 5” OD, 13.0-26.7#Casing. F/Logan CasingScraper (6 per Assy)

6 Ea: Blades for 7” OD, 17-38#Casing and 6-5/8” OD, 24-32#Casing. F/Logan Casing

Scraper (6 per Assy)6 Ea: Blades for 9-5/8” OD, 32.2-64.9#, 9-7/8” OD, 72.1#(8.357” ID)

& 10-3/4”, 91.2#-109#Casing. F/Logan Casing Scraper (6 per Assy)18 Ea: Spring for 4-1/2” & 5” Scraper Blades. F/Logan Casing Scraper (18 per Assy)

30 Ea: Spring (30 per Assy) F/Logan Casing Scraper30 Ea: Spring F/Logan Casing Scraper (30 Required Per Assy)8 Ea: Knife Pin Set Screw (23703)8 Ea: Set Screw (supersedes R18003)8 Ea: Set Screw (supersedes R18003)

Documents

RODE-529009-15K-ND