Rodamientos Timken

EUCLID INDUSTRIES, LLC • 6660 BETA DRIVE • CLEVELAND, OHIO 44143-2321 • (440) 461-4300

EUCLID INDUSTRIES CANADA LTD. • TORONTO • EDMONTON • MONTREAL • VANCOUVER

TIMKEN BearingsRegistered Trademark

Table of Contents:Page Page

Introduction ........................................................ 2 Bearing Identification Chart ............................. 13Proper Wheel Bearing Adjustment .................... 3 By Cone Inside Diameter ......................... 13Application Section ............................................ 4 By Cup Outside Diameter ........................ 24

Front Steering Axle .................................... 4 Tools ................................................................ 40Rear Drive Axle .......................................... 6 Part Number Index .......................................... 42Trailer Axle ............................................... 10

Product UD-69Update

Update May 1999

2 © 1999 Euclid Industries, LLC

Timken tapered roller bearings meet a wide rangeof application requirements. The design combined withquality material and precision machining gives you apart with outstanding performance.

Timken offers a variety of cup and cone configura-tions, single-row, two-row, four-row, and thrust bearingassemblies. At this time Euclid is offering the single-row configuration (TS type) as shown.

Taper roller bearings consist of four basic compo-nents. The cone (inner ring), the cup (outer ring),tapered rollers and a cage (roller retainer). Undernormal operating conditions, the cone, cup and rollerscarry the load while the cage maintains space andretain the rollers on the cone. The cone, rollers, andcage are frequently called the cone assembly. The cupis usually separate from the cone assembly.

Cup

RollerCone

Cage

CupOD

ConeID

BearingWidth

Cup

Cone

Cage

Rollers

The Euclid Timken Tapered Roller Bearing part numbering system has been designed with the counterpersonand maintenance personel in mind. All the numbers begin with the "E-" prefix designating Euclid, followed by"TM" designating GENUINE TIMKEN TAPERED ROLLER BEARINGS, followed by the Timken part number.

Example:

E- TM HM212049

Prefixfor Euclid

Designationfor GenuineTimken Bearings

TimkenPart Number

© 1999 Euclid Industries, LLC 3

HOW NUT TORQUING AND BACK-OFFARE USED TO SET WHEEL BEARINGS

To adjust wheel bearings to meet the correct end-play specifications follow this simple procedure:

Pre-lubricate the bearings with clean lubricant of the same type used in the hub assembly or axle sump.

Torque the adjusting nut (inner nut) to 200 ft. lbs. (271 N-m) to seat the bearing components while rotating oroscillating the wheel assembly to assure that the rollers are fully seated against the cone large rib.

Back off the adjusting nut (inner nut) one full turn or until loose, rotating the wheel assembly.

End-play (free movement) can now be established. Torque the adjusting nut (inner nut) to 50-ft lbs. (68 N-m)while rotating the wheel hub assembly.

Back off the adjusting nut (inner nut) the appropriate amount using the chart below for the exact amount.

CAUTION: Failure to back off the adjusting nut (inner nut) as shown in thechart below could cause the bearing to run hot, damaging the bearingassembly, hub, or spindle. If this happens during operation, the wheelassembly could lock or come off causing damage to property and limb.

If a single nut system, be sure the lock system is in place (Cotter pin, etc.).

At this time, install the locking washer (dowel pin or tang style). If the washers, dowel pin or tangs do not alignremove the washer and turn it over, reinstalling it. If the pins or tangs still fail to align, loosen the adjusting nut(inner nut) just enough for proper alignment.

CAUTION: Never tighten the adjusting nut (inner nut) at this point of theprocedure. It could pre-load the bearing causing it to "run hot" resulting inpremature failure.

Install jam nut (outer nut) and torque to proper specifications, depending on the nut size, using the chart below.

Verify end play with a dial indicator. The acceptable end-play (free movement) of the tire and wheel assemblyalong the spindle axis is 0.001" to 0.005" (0.025 mm to 0.0127 mm).

ADJUSTING NUT BACK OFF JAM NUT TORQUE

Axle Type Threads Final Nut Size Torque SpecificationsPer Inch Back Off

Steer(Front)

Non-Drive

Drive

Trailer

12 1/6 Turn18 1/4 Turn

141/2 Turn

18

121/4 Turn

16

121/4 Turn

16

Install Cotter Pin to LockAxle Nut in Position

Less Than2 5/8"

(66.7 mm)

Dowel TypeWasher

Tang TypeWasher

2 5/8"(66.7 mmand over)

200-300 ft. lbs.(271-407 N-m)

300-400 ft. lbs.(407-542 N-m)

200-275 ft. lbs.(271-373 N-m)

300-400 ft. lbs.(407-542 N-m)

or


FRONT NON-DRIVE STEERING AXLE

1 2 3 4

DANA / SPICERAXLE CAPACITY OUTER CONE OUTER CUP INNER CUP INNER CONE

MODEL (1) (2) (3) (4)

NOTE: E-TMHM212049 should never be used in pace of E-TMHM212049X.

I60 6,000 lbs.

I75 7,500 lbs. E-TM25877 E-TM25820 E-TMJM207010 E-TMJM207049A

I80 8,000 lbs.

I90 9,000 lbs.

I108 10,800 lbs.E-TM28682 E-TM28622 E-TMHM212011 E-TMHM212049

E-TMSET407 E-TMSET413

E-TM3782 E-TM3720 E-TMHM212011 E-TMHM212049

I120 12,000 lbs.E-TMSET406 E-TMSET413

E-TM28682 E-TM28622 E-TMH715311 E-TMH715345

E-TMSET407

I13213,200 lbs. E-TM555-S E-TM552A E-TMH715311 E-TMH715345

1986 to present

I140 14,000 lbs.E-TM3782 E-TM3720 E-TMHM212011 E-TMHM212049


EFA12F3 12,000 lbs. E-TM3782 E-TM3720 E-TMHM212011 E-TMHM212049



EFA18F3 18,000 lbs. E-TM555-S E-TM552A E-TM6420 E-TM6461A

EFA20T2 20,000 lbs. E-TM555-S E-TM552A E-TM6420 E-TM6461A

EATONAXLE CAPACITY OUTER CONE OUTER CUP INNER CUP INNER CONE

MODEL (1) (2) (3) (4)


FRONT NON-DRIVE STEERING AXLE

1 2 3 4

MERITOR

FF931 12,000 lbs.E-TM3782 E-TM3720 E-TMHM212011 E-TMHM212047




FF933E-TM3782 E-TM3720 E-TMHM212011 E-TMHM212047




FF94112,000 lbs.


pre 10/87 E-TMSET406 E-TMSET412

FF94112,000 lbs.


post 10/87 E-TMSET406 E-TMSET413







FL931 E-TM555-S E-TM552A E-TM6420 E-TM6461A


FL941 16,18,20,000 E-TM555-S E-TM552A E-TM6420 E-TM6461A


AXLE CAPACITY OUTER CONE OUTER CUP INNER CUP INNER CONEMODEL (1) (2) (3) (4)

Don't Forget!!

Euclid's quality line of remanufactured, not just rebuilt, products alsoincludes:

• Hydraulic Calipers • Starters and Alternators• Lucas Cylinders • Water Pumps


REAR DRIVE AXLE

1 2 3 4

N175 17,500 lbs.

N190 19,000 lbs. E-TM39590 E-TM39520 E-TM47620 E-TM47686

N210 21,000 lbs.


DANA — SINGLE DRIVEAXLE CAPACITY OUTER CONE OUTER CUP INNER CUP INNER CONE

MODEL (1) (2) (3) (4)

G340S34,000 lbs.

E-TM39590 E-TM39520 E-TM47620 E-TM47686

International / Dana E-TMSET408 E-TMSET411

G380S 38,000 lbs.E-TM580 E-TM572 E-TM592A E-TM594A


G400S 40,000 lbs.E-TM580 E-TM572 E-TM592A E-TM594A


M460S 46,000 lbs.E-TM580 E-TM572 E-TM592A E-TM594A


N400 40,000 lbs.E-TM580 E-TM572 E-TM592A E-TM594A


DANA — TANDEM DRIVEAXLE CAPACITY OUTER CONE OUTER CUP INNER CUP INNER CONE

MODEL (1) (2) (3) (4)


REAR DRIVE AXLE

1 2 3 4

17202/22E-TM39590 E-TM39520 E-TM47620 E-TM47686


1710/21 18,500 lbs.E-TM39590 E-TM39520 E-TM47620 E-TM47686


17221 18,500 lbs.E-TM39590 E-TM39520 E-TM47620 E-TM47686


21121E-TM39590 E-TM39520 E-TM47620 E-TM47686


21421E-TM39590 E-TM39520 E-TM47620 E-TM47686


22221 22,000 lbs.E-TM580 E-TM572 E-TM592A E-TM594A


23121YE-TM580 E-TM572 E-TM592A E-TM594A






EATON — SINGLE DRIVEAXLE CAPACITY OUTER CONE OUTER CUP INNER CUP INNER CONE

MODEL (1) (2) (3) (4)

Don't Forget!!

Euclid offers a comprehensive Shock Absorber line to meet allyour Heavy, Medium and Light-Duty truck needs.


REAR DRIVE AXLE

1 2 3 4

44DP44,000 lbs.

E-TM580 E-TM572 E-TM592A E-TM594A5 - 76 to present E-TMSET401 E-TMSET403

44DS44,000 lbs.

E-TM580 E-TM572 E-TM592A E-TM594A5 - 76 to present E-TMSET401 E-TMSET403

DP402 40,000 lbs.E-TM580 E-TM572 E-TM592A E-TM594A


DP485P 48,000 lbs.E-TM580 E-TM572 E-TM592A E-TM594A

E-TMSET401 E-TMSET403DS341 E-TM39590 E-TM39520 E-TM47620 E-TM47686

1975 to present E-TMSET408 E-TMSET411

DS381E-TM580 E-TM572 E-TM592A E-TM594A


DS402 40,000 lbs.E-TM580 E-TM572 E-TM592A E-TM594A


DS461P 46,000 lbs.E-TM580 E-TM572 E-TM592A E-TM594A






EATON — TANDEM DRIVEAXLE CAPACITY OUTER CONE OUTER CUP INNER CUP INNER CONE

MODEL (1) (2) (3) (4)

L15518,500 lbs.

E-TM47686 E-TM47620 E-TM39590 E-TM39520Std 1974 to present E-TMSET411 E-TMSET408

R170/172 23,000 lbs.E-TM580 E-TM572 E-TM592A E-TM594A


RS21145 21,000 lbs.E-TM580 E-TM572 E-TM592A E-TM594A








MERITOR — SINGLE DRIVEAXLE CAPACITY OUTER CONE OUTER CUP INNER CUP INNER CONE

MODEL (1) (2) (3) (4)


REAR DRIVE AXLE

1 2 3 4

SLHDE-TM39590 E-TM39520 E-TM47620 E-TM47686


SL100 34,000 lbs.E-TM39590 E-TM39520 E-TM47620 E-TM47686


SQ100E-TM580 E-TM572 E-TM592A E-TM594A


SQ100PE-TM580 E-TM572 E-TM592A E-TM594A


SQHDE-TM580 E-TM572 E-TM592A E-TM598A


SQHPE-TM580 E-TM572 E-TM592A E-TM598A


RT40145 40,000 lbs.E-TM580 E-TM572 E-TM592A E-TM594A








MERITOR — TANDEM DRIVEAXLE CAPACITY OUTER CONE OUTER CUP INNER CUP INNER CONE

MODEL (1) (2) (3) (4)

S.O.S.Special Order Service

Can't find it? • Trouble sourcing products? • Need assistance?Let Euclid's Special Order Service (S.O.S.S.O.S.S.O.S.S.O.S.S.O.S.) help.

Euclids position as the market leader provides you access to a comprehensivearray of truck parts products from the industries leading manufactures. ThroughEuclid, these entire product lines are available to you just by placing a phone callto Euclid's S.O.S. Department.


TRAILER, TAG & PUSHER

1 2 3 4

D-22 22,500 lbs.E-TMHM212049 E-TMHM212011 E-TMHM218210 E-TMHM218248


K-14 14,000 lbs.E-TM528 E-TM522 E-TM563 E-TM567

E-TMSET413

K-20 20,000 lbs.E-TMHM212049 E-TMHM212011 E-TM653 E-TM663


K-21 21,000 lbs.E-TMHM212049 E-TMHM212011 E-TM653 E-TM663


K-22 22,500 lbs. E-TMHM212049 E-TMHM212011 E-TMHM218210 E-TMHM218248

K-25 25,000 lbs. E-TM643 E-TM632 E-TM742 E-TM749

Optional 25,000 lbs. E-TM643 E-TM633 E-TM742 E-TM749S

K-30 30,000 lbs. E-TM740 E-TM742 E-TM752 E-TM759

DANAAXLE CAPACITY OUTER CONE OUTER CUP INNER CUP INNER CONE

MODEL (1) (2) (3) (4)

• Brake Repair Kits

• Brake Camshafts and Repair Kits

• Manual and Automatic Slack Adjusters

• Lined and Unlined Brake Shoes

• Brake Lining and Block

• Air Brake Hose

• Spring Brakes

• Wedge Brake Parts

• Remanufactured Air Compressors

• Remanufactured Air Valves

• Hydraulic Brake Hardware

• Wheel Cylinders and Calipers

• Disc Pads

• Rotors and Drums

In addition to the products contained in this Product UpDate,Euclid’s extensive product offering includes:

• Disc and Spoke Wheel Studs and Nuts

• Rim Clamps

• Spindle Nuts

• Wheel Hubs

• Suspension Components

• Shock Absorbers

• Tie Rod Ends

• Drag Links

• King Pins

• Air Springs

• Air Conditioning and Heating Parts

• Remanufactured Starters and Alternators

• Water Pumps



1 2 3 4

DEXTER

D-2012 22,000 lbs.

D-2212 22,500 lb. E-TMHM212049 E-TMHM212011 E-TMHM218210 E-TMHM218248

D-2512 25,000 lbs.

D-2016 20,000 lbs.

D-2216 22,500 lbs. E-TMSET413 E-TMSET414

D-2516 25,000 lbs.

10,000 lbs.

12,000 lbs. E-TM25580 E-TM25520 E-TM382A E-TM387A

15,000 lbs.

EATON

25R E-TMHM212049 E-TMHM212011 E-TM653 E-TM665A22R

22L E-TMSET413

23RE-TMHM212049 E-TMHM212011 E-TMHM218210 E-TMHM218248

23L


22RE-TMHM212049 E-TMHM212011 E-TM653 E-TM665A

E-TMSET413

22LE-TMHM212049 E-TMHM212011 E-TM653 E-TM665A

E-TMSET413

CE-TMHM212049 E-TMHM212011 E-TM653 E-TM665A

E-TMSET413

C2E-TMHM212049 E-TMHM212011 E-TM653 E-TM665A

E-TMSET413

CDE-TMHM212049 E-TMHM212011 E-TM653 E-TM665A

E-TMSET413

CD2E-TMHM212049 E-TMHM212011 E-TM653 E-TM665A

E-TMSET413





1 2 3 4

NO. 5 E-TMHH506348 E-TMHH506310 E-TM592A E-TM593A

PRO-PARE-TMHM518445 E-TMHM518410 E-TMHM518410 E-TMHM518445


FRUEHAUF

TK 22,500 lbs.E-TMHM212049 E-TMHM212011 E-TM653 E-TM663


TN 22,500 lbs.E-TMHM212049 E-TMHM212011 E-TMHM218210 E-TMHM218248


TP22,500 / E-TMHM518445 E-TMHM518410 E-TMHM518410 E-TMHM518445

25,000 lbs. E-TMSET415 E-TMSET415

TQ25,000 / E-TMHM212049 E-TMHM212011 E-TMHM218210 E-TMHM218248


TR22,500 / E-TM580 E-TM572 E-TM592A E-TM594A


MERITOR




CONE BEAR- CUP EUCLIDPART

CUPING PART CUP PART

NO.OD

WIDTH NO. NO.



NO.OD

WIDTH NO. NO.

* — Contact S.O.S. for Availability

BEARING IDENTIFICATION CHARTBY CONE INSIDE DIAMETER

In Ascending Order

1.375" ID CONE BORE (cont'd.)HM88649 2.8750 1.0450 HM88612 *

2.8750 1.0630 HM88613 *3.0000 1.0000 HM88615 *

LM48548 2.5625 0.7100 LM48510 E-TMLM485102.5625 0.7100 LM48510P *2.5625 0.8000 LM48511 *2.5625 0.8300 LM48511A *2.6875 0.7100 LM48514 *2.6875 0.7100 LM48514XP *

1.3775" ID CONE BOREL68149 2.3280 0.6250 L68110 *

2.3612 0.6250 L68111 E-TML681112.3612 0.6250 L68111P *2.3622 0.6250 JL68111-Z *2.5625 0.6250 L68116 *

1.4365" ID CONE BORE25880 2.8750 0.9375 25820 E-TM25820

2.8750 0.9375 25821 E-TM258211.4375" ID CONE BORE31597 3.0000 1.1563 31520 E-TM31520

3.0000 1.1563 31521 *3.1250 1.1563 31523RB *

44143 3.48430 1.00000 44348 E-TM443483.54300 1.00000 44354 *

HM89449 3.0000 1.1563 HM89410 E-TMHM894103.0000 1.1563 HM89410P *3.0000 1.1563 HM89411 *

1.4961" ID CONE BOREJL69349 2.4803 0.6693 JL69310 E-TMJL69310

2.4803 0.7446 JL69310E *2.4803 0.6693 JL69310P *2.4803 0.6693 JL69310-Z *2.4803 0.6693 JK149563 *

1.5" ID CONE BOREHM801346X 3.2500 1.1563 HM801310 E-TMHM801310

3.2500 1.1563 HM801310V *3.2500 1.1563 HM801311 *

1.625" ID CONE BORE3585 3.3125 1.1875 3520 *

3.3125 1.1875 3520V *3.3125 1.1875 3530 *3.3970 1.1875 3521 *3.4375 1.1875 3525 E-TM35253.4375 1.1875 3526 *

HM803146 3.5000 1.1875 HM803110 E-TMHM8031103.5000 1.1875 HM803110RB *3.5000 1.1875 HM803111 *

.75" ID CONE BORELM11949 1.7810 0.6100 LM11910 E-TMLM11910

2.0787 0.7100 LM11919 *0.8656" ID CONE BORELM12749 1.7810 0.6100 LM12710 E-TMLM12710

1.7810 0.6100 LM12710P *1.8100 0.6100 LM12711 *

1" ID CONE BORE15101 2.4375 0.7500 15243 E-TM15243

2.4409 0.8125 15244 *2.4409 0.8125 15244X *2.4409 0.7500 15245 E-TM152452.5000 0.8125 15249 *2.5000 0.8125 15250 *2.5000 0.7500 15250R *2.5000 0.8125 15250RB *2.5000 0.8125 15250X *

L44643 1.9800 0.5600 L44610 E-TML446101.9800 0.5600 L44610-Z *2.0467 0.5910 L44613 *2.0472 0.5600 JL44615 *

1.0625" ID CONE BOREL44649 1.9800 0.5600 L44610 E-TML44610

1.9800 0.5600 L44610-Z *2.0467 0.5910 L44613 *2.0472 0.5600 JL44615 *

1.25" ID CONE BORELM67048 2.3037 0.6256 JLM37020P *

2.3280 0.6250 LM67010 E-TMLM670102.3280 0.6250 LM67010-Z *2.4404 0.6250 LM67014 *2.4404 0.6250 LM67014X *2.6487 0.8000 LM67019 *

1.3125" ID CONE BOREM88048 2.6875 0.8750 M88010 E-TMM88010

2.6875 0.8750 M88011 *2.6875 0.8750 M88012 *2.8750 0.8750 M88018 *3.0000 0.8750 M88022 *

1.375" ID CONE BORE25877 2.8750 0.9375 25820 E-TM25820

2.8750 0.9375 25821 E-TM25821HM88649 2.8336 1.0630 HM88611 *

2.8438 1.0000 HM88610 E-TMHM886102.8438 1.0000 HM88610A *2.8438 1.0000 HM88610P *2.8438 1.0000 HM88610X *2.8593 1.0000 HM88611AS *

(Continued on next page)




NO.OD

WIDTH NO. NO.



NO.OD

WIDTH NO. NO.



In Ascending Order

1.625" ID CONE BORE (cont'd.)HM803146 3.6250 1.1875 HM803112 *HM804840 3.7500 1.1875 HM804810 E-TMHM804810

3.7500 1.1875 HM804811 *3.8750 1.1875 HM804814RB *

HM903244 3.7500 1.2188 HM903210 E-TMHM9032103.8750 1.2188 HM903216 *

LM501349 2.8910 0.7700 LM501310 E-TMLM5013102.8910 0.7700 LM501310P *2.8910 0.8437 LM501314 E-TMLM5013142.8910 0.9060 LM501311 *

M802048 3.2500 1.0450 M802011 E-TMM8020113.2500 1.0450 M802011AP *

1.75" ID CONE BORE3782 3.6718 1.1875 3720 E-TM3720

3.6718 1.1875 3720V *3.6718 1.1875 3730 *3.6875 1.1875 3727 *3.7500 1.1875 3726 *3.8750 1.1875 3732 E-TM37323.9362 1.1875 3731 *3.9370 1.1092 373 *3.9385 1.1875 3733 *3.9386 1.1850 3735 *

45280 4.1250 1.1875 45220 E-TM452204.1250 1.1875 45221 *4.1875 1.1875 45222 *

53176 3.7500 1.2188 53375 *3.7500 1.2188 53377 *3.8750 1.2188 53387 *3.8750 1.2188 53387X *3.9364 1.2188 53394 *4.0000 1.2188 53398 *

HM803149 3.5000 1.1875 HM803110 E-TMHM8031103.5000 1.1875 HM803110RB *3.5000 1.1875 HM803111 *3.6250 1.1875 HM803112 *

HM807040 4.1250 1.4375 HM807010 E-TMHM8070104.1250 1.4375 HM807010P *4.1250 1.4375 HM807010XX *4.1250 1.4375 HM807011 *4.1339 1.4517 JHM807012 *4.2900 1.4375 HM807015-BR *

HM903249 3.7500 1.2188 HM903210 E-TMHM9032103.8750 1.2188 HM903216 *

HM903249A 3.7500 1.2188 HM903210 E-TMHM9032103.8750 1.2188 HM903216 *

1.771" ID CONE BORE25584 3.2273 0.9400 25518 *

3.2500 0.9375 25519 *3.2650 0.9375 25520 E-TM255203.2650 1.0625 25523 E-TM255233.2650 0.9375 25524 *3.2700 0.9375 25521 *

25584 3.2700 0.9400 25522 *3.3125 0.9375 25530RB *3.3465 0.9375 25526 *3.3465 1.0625 25527 *3.5625 0.9688 CN25540 *3.6250 0.9375 25528 *3.9368 1.0000 25547RB *

1.7812" ID CONE BORELM102949 2.8910 0.7700 LM102910 E-TMLM102910

2.8910 0.7700 LM102910P *2.8910 0.8437 LM102911 *2.8910 0.8437 LM102911P *

LM603049 3.0625 0.7812 LM603011 E-TMLM6030113.0625 0.8437 LM603012 *3.0625 0.8437 LM603019 *3.0709 0.7812 JLM603013-Z *3.1486 0.7812 LM603014 *3.1486 0.8437 LM603015 *

1.796" ID CONE BORE25590 3.2273 0.9400 25518 *

3.2500 0.9375 25519 *3.2650 0.9375 25520 E-TM255203.2650 1.0625 25523 E-TM255233.2650 0.9375 25524 *3.2700 0.9375 25521 *3.2700 0.9400 25522 *3.3125 0.9375 25530RB *3.3465 0.9375 25526 *3.3465 1.0625 25527 *3.5625 0.9688 CN25540 *3.6250 0.9375 25528 *3.9368 1.0000 25547RB *

1.875" ID CONE BORE386A 3.8125 0.8268 382A E-TM382A

3.8125 1.0000 382-S *3.8125 1.2813 382X *3.8750 0.8268 382 E-TM3823.9370 0.8268 383 *3.9370 0.8268 383A *3.9370 0.8268 383AXX *3.9370 1.0000 383X *





NO.OD

WIDTH NO. NO.



NO.OD

WIDTH NO. NO.



In Ascending Order

1.875" ID CONE BORE (cont'd.)386A 4.1250 1.0768 384-SW *528 3.9370 1.375 520X *

3.9370 1.375 J520 *3.9380 1.4107 V523 *3.9385 1.5625 522A *3.9843 1.375 522X *4.0000 1.375 522 E-TM522

72188C 4.8750 1.4375 72487 E-TM724875.0000 1.4375 72500 *

HM804846 3.7500 1.1875 HM804810 E-TMHM8048103.7500 1.1875 HM804811 *3.8750 1.1875 HM804814RB *

M804049 3.5000 1.0000 M804010 E-TMM804010M86649 2.5312 0.8438 M86610 E-TMM86610

2.5312 0.8438 M86610CP *2.5312 0.8438 M86610P *

1.9375" ID CONE BOREHH506348 4.5000 1.7500 HH506310 E-TMHH506310

4.5000 1.7500 HH506311 *HM807044 4.1250 1.4375 HM807010 E-TMHM807010

4.1250 1.4375 HM807010P *4.1250 1.4375 HM807010XX *4.1250 1.4375 HM807011 *4.1339 1.4517 JHM807012 *4.2900 1.4375 HM807015-BR *

1.9685" ID CONE BORE396 4.3301 0.9350 394XS *

4.3301 1.0455 3921XA *4.3307 1.0630 393 *4.3307 0.8661 394 *4.3307 0.8661 394A E-TM394A4.3307 0.8661 394ARB *4.3307 0.8661 394AS *4.3307 0.8661 394AX *4.3750 0.8661 393AS *4.4375 0.8750 393A *4.4375 0.9661 393CE *4.4375 1.0617 3920 E-TM39204.4375 1.0617 3920C *4.4680 0.9310 393C *4.4680 0.8661 394CS E-TM394CS

2" ID CONE BORE 4.5900 1.3109 393WE *JLM104948 3.2283 0.8465 JLM104910 E-TMJLM104910

3.2283 0.8465 JLM104910-Z *3.2500 0.8313 LM104911 E-TMLM1049113.2500 0.9113 LM104911A *3.2500 0.8313 LM104911P *

2" ID CONE BORE (cont'd.)JLM104948 3.2650 0.8313 LM104912 *

3.4646 0.8465 JLM104914 *3780 3.6718 1.1875 3720 E-TM3720

3.6718 1.1875 3720V *3.6718 1.1875 3730 *3.6875 1.1875 3727 *3.7500 1.1875 3726 *3.8750 1.1875 3732 E-TM37323.9362 1.1875 3731 *3.9370 1.1092 373 *3.9385 1.1875 3733 *3.9386 1.1850 3735 *

45284 4.1250 1.1875 45220 E-TM452204.1250 1.1875 45221 *4.1875 1.1875 45222 *

49585 4.0000 1.2500 49520 E-TM495204.0000 1.2500 49520W *4.0000 1.3750 49521 *4.0000 1.2500 49522 *

368A 3.5000 0.8125 362A *3.5000 0.9375 362AX *3.5000 1.0625 363X *3.5433 0.7874 362 *3.5433 0.7874 363 *3.5433 0.9843 362X *3.7402 0.8125 362AC *

385A 3.8125 0.8268 382A E-TM382A3.8125 1.0000 382-S *3.8125 1.2813 382X *3.8750 0.8268 382 E-TM3823.9370 0.8268 383 *3.9370 0.8268 383A *3.9370 0.8268 383AXX *3.9370 1.0000 383X *4.1250 1.0768 384-SW *

55200C 4.3301 1.1516 55434 *4.3750 1.1875 55437 E-TM554374.4375 1.1875 55443 E-TM55443

72200C 4.8750 1.4375 72487 E-TM724875.0000 1.4375 72500 *






NO.OD

WIDTH NO. NO.



NO.OD

WIDTH NO. NO.



In Ascending Order

2" ID CONE BORE (cont'd.)LM104949 3.2283 0.8652 JLM104910 *

3.2283 0.8652 JLM104910-Z *3.2500 0.8500 LM104911 E-TMLM1049113.2500 0.9300 LM104911A *3.2500 0.8500 LM104911P *3.2650 0.8500 LM104912 *3.4646 0.8652 LM104914 *

2.0625" ID CONE BORE3767 3.6718 1.1875 3720 E-TM3720

3.6718 1.1875 3720V *3.6718 1.1875 3730 *3.6875 1.1875 3727 *3.7500 1.1875 3726 *3.8750 1.1875 3732 E-TM37323.9362 1.1875 3731 *3.9370 1.1092 373 *3.9385 1.1875 3733 *3.9386 1.1850 3735 *

55206C 4.3301 1.1516 55434 *4.3750 1.1875 55437 E-TM554374.4375 1.1875 55443 E-TM55443

2.125" ID CONE BORE557-S 4.8125 1.5000 553X *

4.8750 1.5000 552 E-TM5524.8750 1.5000 552A E-TM552A4.8750 1.5000 552AW *4.8750 1.5000 552AX *4.8750 1.3745 552-S *4.8750 1.5625 552-SX *4.9213 1.5000 553A *5.1159 1.5000 553-SA *5.1205 1.5000 553-S *

72212C 4.8750 1.4375 72487 E-TM724875.0000 1.4375 72500 *

78215C 5.3750 1.4375 78537 *5.5130 1.4375 78551 E-TM78551


HM911242 5.1181 1.4375 JHM911211 *5.1250 1.4375 HM911210 E-TMHM9112105.3143 1.4119 HM911216 *

2.1654" ID CONE BOREJLM506849 3.5000 0.9055 LM506810A *

3.5433 0.9055 JLM506810 E-TMJLM5068103.5433 0.9055 JLM506810V *3.5433 0.9843 JLM506811 *3.5433 1.0170 JLM506812 *

JM207049 3.7402 1.1417 JM207010 E-TMJM2070103.7402 1.1811 JM207010A *

JM207049A 3.7402 1.1417 JM207010 E-TMJM2070103.7402 1.1811 JM207010A *

2.1875" ID CONE BORE72218C 4.8750 1.4375 72487 E-TM72487

5.0000 1.4375 72500 *2.25" ID CONE BORE387 3.8125 0.8268 382A *

3.8125 1.0000 382-S *3.8125 1.2813 382X *3.8750 0.8268 382 E-TM3823.9370 0.8268 383 *3.9370 0.8268 383A *3.9370 0.8268 383AXX *3.9370 1.0000 383X *4.1250 1.0768 384-SW *

390 4.3301 0.9350 394XS *4.3301 1.0455 3921XA *4.3307 0.8661 394 *4.3307 0.8661 394A E-TM394A4.3307 0.8661 394ARB *4.3307 0.8661 394AS *4.3307 0.8661 394AX *4.3307 1.0630 393 *4.3750 0.8661 393AS *4.4375 0.8750 393A *4.4375 0.9661 393CE *4.4375 1.0617 3920 E-TM39204.4375 1.0617 3920C *4.4680 0.8661 394CS E-TM394CS4.4680 0.9310 393C *4.5900 1.3109 393WE *

462 3.9843 1.5315 4520 *4.1250 1.1875 453X E-TM453X4.1250 1.1875 453XV *4.1250 1.2813 453E *4.2500 1.0938 453A *4.2500 1.0938 453AS *4.2500 1.0943 453 *4.2500 1.2818 452 *4.2500 1.2818 452A *





NO.OD

WIDTH NO. NO.



NO.OD

WIDTH NO. NO.



In Ascending Order

2.25" ID CONE BORE (cont'd.)462 4.3287 1.0943 454X *

4.3307 1.0943 454 *4.3750 1.5003 4536 *

469 3.9843 1.5315 4520 *4.1250 1.1875 453X E-TM453X4.1250 1.1875 453XV *4.1250 1.2813 453E *4.2500 1.0938 453A *4.2500 1.0938 453AS *4.2500 1.9430 453 *4.2500 1.2818 452 *4.2500 1.2818 452A *4.3287 1.0943 454X *4.3307 1.9430 454 *4.3750 1.5003 4536 *

3979 4.3301 1.1713 3921XA *4.3307 1.1563 3927AS *4.3307 1.1875 3927X *4.4375 1.1875 3919RB *4.4375 1.1875 3920 E-TM39204.4375 1.1875 3920C *4.4375 1.1875 3920XX *4.4375 1.1875 3925 E-TM39254.4375 1.3125 3926 *

28682 3.8125 0.9688 28621 *3.8437 0.9688 28622 E-TM286223.8437 0.9688 28622A *3.8437 0.9688 28622P *3.8750 0.9688 28623 *

39580 4.4375 1.1875 39520 E-TM395204.4375 1.1875 39520P *4.4375 1.1875 39520XX *4.4375 1.1875 39521 *4.4375 1.4375 39522 *4.7238 1.2894 39528 *

39581 4.4375 1.1875 39520 E-TM395204.4375 1.1875 39520P *4.4375 1.1875 39520XX *4.4375 1.1875 39521 *4.4375 1.4375 39522 *4.7238 1.2894 39528 *

45291 4.1250 1.1875 45220 E-TM452204.1250 1.1875 45221 *4.1875 1.1875 45222 *

65225 5.0000 1.7500 65500 E-TM655005.0000 1.7500 65501 *5.3750 1.8125 65537 *

2.25" ID CONE BORE (cont'd.)66225 4.6250 1.3125 66461 *

4.6250 1.3125 66462 E-TM66462387A 3.8125 0.8268 382A *

3.8125 1.0000 382-S *3.8125 1.2813 382X *3.8750 0.8268 382 E-TM3823.9370 0.8268 383 *3.9370 0.8268 383A *3.9370 0.8268 383AXX *3.9370 1.0000 383X *4.1250 1.0768 384-SW *

387AS 3.8125 0.8268 382A *3.8125 1.0000 382-S *3.8125 1.2813 382X *3.8750 0.8268 382 E-TM3823.9370 0.8268 383 *3.9370 0.8268 383A *3.9370 0.8268 383AXX *3.9370 1.0000 383X *4.1250 1.0768 384-SW *

555-S 4.8125 1.5000 553X *4.8750 1.5000 552 E-TM5524.8750 1.5000 552A E-TM552A4.8750 1.5000 552AW *4.8750 1.5000 552AX *4.8750 1.3745 552-S *4.8750 1.5625 552-SX *4.9213 1.5000 553A *5.1159 1.5000 553-SA *5.1205 1.5000 553-S *

72225C 4.8750 1.4375 72487 E-TM724875.0000 1.4375 72500 *

2.375" ID CONE BORE65237 5.0000 1.7500 65500 E-TM65500

5.0000 1.7500 65501 *5.3750 1.8125 65537 *

HM212044 4.8125 1.5000 HM212010 *4.8125 1.5000 HM212011 E-TMHM2120114.8125 1.5000 HM212011V *

HM911245 5.1181 1.4375 JHM911211 *5.1250 1.4375 HM911210 E-TMHM9112105.3143 1.4119 HM911216 *

2.4375" ID CONE BORE392 4.3301 0.9350 394XS *

4.3301 1.0455 3921XA *4.3307 1.0630 393 *4.3307 0.8661 394 *





NO.OD

WIDTH NO. NO.



NO.OD

WIDTH NO. NO.



In Ascending Order

2.4375" ID CONE BORE (cont'd.)392 4.3307 0.8661 394A E-TM394A

4.3307 0.8661 394ARB *4.3307 0.8661 394AS *4.3307 0.8661 394AX *4.3750 0.8661 393AS *4.4375 0.8750 393A *4.4375 0.9661 393CE *4.4375 1.0617 3920 E-TM39204.4375 1.0617 3920C *4.4680 0.9310 393C *4.4680 0.8661 394CS E-TM394CS4.5900 1.3109 393WE *

H715334 5.3750 1.8125 H715311 E-TMH7153115.3750 1.8125 H715311A *5.3750 1.8125 H715311P *5.3750 1.8125 H715311XX *5.3750 1.9375 H715311W *5.3750 1.9375 H715313W *5.5000 1.8125 H715310 *

HM813843 5.0000 1.4375 HM813810 E-TMHM8138105.0000 1.4375 HM813811 *

2.5" ID CONE BORE395 4.3301 0.9350 394XS *

4.3301 1.0455 3921XA *4.3307 1.0630 393 *4.3307 0.8661 394 *4.3307 0.8661 394A E-TM394A4.3307 0.8661 394ARB *4.3307 0.8661 394AS *4.3307 0.8661 394AX *4.3750 0.8661 393AS *4.4375 0.8750 393A *4.4375 0.9661 393CE *4.4375 1.0617 3920 E-TM39204.4375 1.0617 3920C *4.4680 0.9310 393C *4.4680 0.8661 394CS E-TM394CS4.5900 1.3109 393WE *


2.5" ID CONE BORE (cont'd.)39585 4.4375 1.1875 39520 E-TM39520

4.4375 1.1875 39520P *4.4375 1.1875 39520XX *4.4375 1.1875 39521 *4.4375 1.4375 39522 *4.7238 1.2894 39528 *

390A 4.3301 0.9350 394XS *4.3301 1.0455 3921XA *4.3307 0.8661 394 *4.3307 0.8661 394A E-TM394A4.3307 0.8661 394ARB *4.3307 0.8661 394AS *4.3307 0.8661 394AX *4.3307 1.0630 393 *4.3750 0.8661 393AS *4.4375 0.8750 393A *4.4375 0.9661 393CE *4.4375 1.0617 3920 E-TM39204.4375 1.0617 3920C *4.4680 0.8661 394CS E-TM394CS4.4680 0.9310 393C *4.5900 1.3109 393WE *

78250AC 5.3750 1.4375 78537 *5.5130 1.4375 78551 E-TM78551

HM212046 4.8125 1.5000 HM212010 *4.8125 1.5000 HM212011 E-TMHM2120114.8125 1.5000 HM212011V *

HM212047 4.8125 1.5000 HM212010 *4.8125 1.5000 HM212011 E-TMHM2120114.8125 1.5000 HM212011V *

2.5591" ID CONE BOREJH211749 4.7244 1.5354 JH211710 E-TMJH211710JLM710949C 4.1339 0.9449 JLM710910 E-TMJLM710910JM511945 4.3307 1.1024 JM511910 E-TMJM511910

4.4375 1.1425 3920 E-TM3920JM511946 4.3307 1.1024 JM511910 E-TMJM511910

4.4375 1.1425 3920 E-TM39202.5625" ID CONE BORE6379 5.1875 2.1250 6321 *

5.3150 2.1250 6325 *5.3447 2.1250 6320 E-TM63205.3447 2.1250 6320V *5.5118 2.1250 J6327 *

2.625" ID CONE BORE641 5.1181 1.6250 633X *

5.1250 1.6250 633 E-TM6335.3750 1.6250 632 E-TM632





NO.OD

WIDTH NO. NO.



NO.OD

WIDTH NO. NO.



In Ascending Order

2.625" ID CONE BORE (cont'd.)641 5.3750 1.6250 632A *

5.3750 2.1874 632AS *5.3750 1.6250 632-S *5.3750 1.7813 634W *




6389 5.1875 2.1250 6321 *5.3150 2.1250 6325 *5.3447 2.1250 6320 E-TM63205.3447 2.1250 6320V *5.5118 2.1250 J6327 *

39590 4.4375 1.1875 39520 E-TM395204.4375 1.1875 39520P *4.4375 1.1875 39520XX *4.4375 1.1875 39521 *4.4375 1.4375 39522 *4.7238 1.2894 39528 *

395A 4.3301 0.9350 394XS *4.3301 1.0455 3921XA *4.3307 1.0630 393 *4.3307 0.8661 394 *4.3307 0.8661 394A E-TM394A

2.625" ID CONE BORE (cont'd.)395A 4.3307 0.8661 394ARB *

4.3307 0.8661 394AS *4.3307 0.8661 394AX *4.3750 0.8661 393AS *4.4375 0.8750 393A *4.4375 0.9661 393CE *4.4375 1.0617 3920 E-TM39204.4375 1.0617 3920C *4.4680 0.9310 393C *4.4680 0.8661 394CS E-TM394CS4.5900 1.3109 393WE *


HM212049 4.8125 1.5000 HM212010 *4.8125 1.5000 HM212011 E-TMHM2120114.8125 1.5000 HM212011V *

HM212049X 4.8125 1.5000 HM212010 *4.8125 1.5000 HM212011 E-TMHM2120114.8125 1.5000 HM212011V *

HM813844 5.0000 1.4375 HM813810 E-TMHM8138105.0000 1.4375 HM813811 *

2.6875" ID CONE BORE9278 6.3750 1.9375 9220 E-TM9220

6.3750 1.9375 9220XX *H715343 5.3750 1.8125 H715311 E-TMH715311

5.3750 1.8125 H715311A *5.3750 1.8125 H715311P *5.3750 1.8125 H715311XX *5.3750 1.9375 H715311W *5.3750 1.9375 H715313W *5.5000 1.8125 H715310 *

2.75" ID CONE BORE29675 4.4375 1.0000 29620 E-TM29620

4.4375 1.0000 29620V *4.4995 1.0000 29622W *4.5000 1.0937 29624 *4.5900 1.1475 29625WE *4.7500 1.0000 29630 E-TM29630

33275 4.6250 1.1875 33461 *4.6250 1.1875 33462 E-TM334624.7244 1.1730 33472 E-TM33472





NO.OD

WIDTH NO. NO.



NO.OD

WIDTH NO. NO.



In Ascending Order

2.75" ID CONE BORE643 5.1181 1.6250 633X *

5.1250 1.6250 633 E-TM6335.3750 1.6250 632 E-TM6325.3750 1.6250 632A *5.3750 2.1874 632AS *5.3750 1.6250 632-S *5.3750 1.7813 634W *

2.7559" ID CONE BOREJM612949 4.5276 1.1417 JM612910 E-TMJM612910

4.5276 1.1417 JM612910V *2.8125" ID CONE BORE33281 4.6250 1.1875 33461 *

4.6250 1.1875 33462 E-TM334624.7244 1.1730 33472 E-TM33472

47490 4.7244 1.2813 47420 E-TM474204.7244 1.2813 47420A *4.7244 1.2813 J47420X *4.7500 1.2813 47423 *

H414249 5.3750 1.6250 H414210 E-TMH4142105.3750 1.7813 H414211W *


2.8750" ID CONE BORE567 4.8750 1.4375 563A *

5.0000 1.4375 563 E-TM5635.0000 1.4375 563X *5.1181 1.4542 562X *5.1200 1.4375 562 *5.1875 1.7500 564 *

29685 4.4375 1.0000 29620 E-TM296204.4375 1.0000 29620V *4.4995 1.0000 29622W *4.5000 1.0937 29624 *4.5900 1.1475 29625WE *4.7500 1.0000 29630 E-TM29630

33287 4.6250 1.1875 33461 *4.6250 1.1875 33462 E-TM334624.7244 1.1730 33472 E-TM33472

2.9528" ID CONE BOREJLM714149 4.5276 0.9843 JLM714110 E-TMJLM7141103" ID CONE BORE5760 5.3438 1.7500 5735 E-TM5735

3" ID CONE BORE (cont'd.)5760 5.3438 1.7500 5735V *

5.5150 2.2500 5722 *5.5960 1.7500 5720 *

42687 5.0000 1.1875 42620 E-TM426205.1171 1.3090 42624 *

42688 5.0000 1.1875 42620 E-TM426205.1171 1.3090 42624 *

47679 5.2500 1.3125 47620 E-TM476205.2500 1.3125 47620A *5.2500 1.3125 47620XX *5.3750 2.1875 47622W *5.3750 1.7500 47623A *5.5115 1.4375 47621 *

495AX 5.2500 1.1875 492A E-TM492A5.2500 1.3125 492W *5.3140 1.1875 493A *5.3750 1.1875 493 E-TM4935.3750 1.1875 493AA *5.3750 1.1875 493P *5.3750 1.1875 493-S *5.3750 1.1875 493V *5.5118 1.1875 493X *5.6875 1.1875 494A *

6461A 5.8750 2.1250 6420 E-TM64205.8750 2.1250 6420A *5.9055 2.1250 6424 *6.1875 2.1250 6427 *

3.1496" ID CONE BOREJM515649 5.1181 1.3780 JM515610 E-TMJM5156103.1875" ID CONE BORE496 5.2500 1.1875 492A E-TM492A

5.2500 1.3125 492W *5.3140 1.1875 493A *5.3750 1.1875 493 E-TM4935.3750 1.1875 493AA *5.3750 1.1875 493P *5.3750 1.1875 493-S *5.3750 1.1875 493V *5.5118 1.1875 493X *5.6875 1.1875 494A *

740 5.8750 1.6875 7464 *5.9033 1.7502 743X *5.9045 1.7500 742A *5.9055 1.7502 743 *5.9090 1.7500 742 E-TM7425.9090 1.7500 742V *8.9090 1.7500 742X *




NO.OD

WIDTH NO. NO.



NO.OD

WIDTH NO. NO.



In Ascending Order

3.25" ID CONE BORE495 5.2500 1.1875 492A E-TM492A

5.2500 1.3125 492W *5.3140 1.1875 493A *5.3750 1.1875 493 E-TM4935.3750 1.1875 493AA *5.3750 1.1875 493P *5.3750 1.1875 493-S *5.3750 1.1875 493V *5.5118 1.1875 493X *5.6875 1.1875 494A *

580 5.5000 1.4375 572-S *5.5000 1.4375 572X *5.5000 1.4375 572XS *5.5111 1.3878 572A *5.5115 1.4375 572 E-TM5725.5115 1.4375 572XX *5.5115 1.4375 574 *

582 5.5000 1.4375 572-S *5.5000 1.4375 572X *5.5000 1.4375 572XS *5.5111 1.3878 572A *5.5115 1.4375 572 E-TM5725.5115 1.4375 572XX *5.5115 1.4375 574 *

663 5.7500 1.6250 653 E-TM6535.7500 1.6250 653V *5.8750 1.6250 652A *5.9055 1.6250 653X *6.0000 1.6250 652 E-TM652

27687 4.9375 1.0000 27620 E-TM276204.9375 1.0000 27620RB *4.9375 1.1250 27621 *

47686 5.2500 1.3125 47620 E-TM476205.2500 1.3125 47620A *5.2500 1.3125 47620XX *5.3750 2.1875 47622W *5.3750 1.7500 47623A *5.5115 1.4375 47621 *

HM516449C 5.2500 1.5625 HM516410 E-TMHM5164105.2500 1.5625 HM516410A *


5.25000 1.3125 492W *5.31400 1.1875 493A *5.37500 1.1875 493 E-TM4935.37500 1.1875 493AA *5.37500 1.1875 493P *

3.3125" ID CONE BORE498 5.37500 1.1875 493-S *

5.37500 1.1875 493V *5.51180 1.1875 493X *5.68750 1.1875 494A *

3.3465" ID CONE BOREJM716649 5.1181 1.1811 JM716610 E-TMJM716610

5.3150 1.2992 JM716615 *3.3475" ID CONE BORE749 5.8750 1.6875 7464 *

5.9033 1.7502 743X *5.9045 1.7500 742A *5.9055 1.7502 743 *5.9090 1.7500 742 E-TM7425.9090 1.7500 742V *5.9090 1.7500 742X *

749-S 5.8750 1.6875 7464 *5.9033 1.7502 743X *5.9045 1.7500 742A *5.9055 1.7502 743 *5.9090 1.7500 742 E-TM7425.9090 1.7500 742V *5.9090 1.7500 742X *


5.2500 1.3125 492W *5.3140 1.1875 493A *5.3750 1.1875 493 E-TM4935.3750 1.1875 493AA *5.3750 1.1875 493P *5.3750 1.1875 493-S *5.3750 1.1875 493V *5.5118 1.1875 493X *5.6875 1.1875 494A *

596 5.8125 1.4062 592XE *5.8125 1.4062 592XS *5.8200 1.4062 592AX *5.9055 1.4160 JM719113 *5.9055 1.4170 593X *6.0000 1.5625 592 E-TM5926.0000 1.5625 592A E-TM592A6.0000 1.4062 592AS *6.0000 1.5625 592-S *

665A 5.7500 1.6250 653 E-TM6535.7500 1.6250 653V *5.8750 1.6250 652A *5.9055 1.6250 653X *6.0000 1.6250 652 E-TM652




NO.OD

WIDTH NO. NO.



NO.OD

WIDTH NO. NO.



In Ascending Order

3.5" ID CONE BORE6580 6.2992 2.1250 6525X *

6.3125 2.1250 6521 *6.3750 2.1250 6535 E-TM65356.3750 2.1250 6535P *6.3750 2.1250 6535W *6.3750 2.1250 6536 *6.3750 2.1250 6536V *6.6870 2.1250 6520 *

42350 5.8437 1.1250 42584 E-TM425845.8437 1.1250 42584XX *5.8437 1.1250 42585 *5.8437 1.3750 42586 *5.8750 1.1250 42587 *5.9045 1.1250 42590 *

593A 5.8125 1.4062 592XE *5.8125 1.4062 592XS *5.8200 1.4062 592AX *5.9055 1.4170 593X *5.9055 1.4160 JM719113 *6.0000 1.5625 592 E-TM5926.0000 1.5625 592A E-TM592A6.0000 1.4062 592AS *6.0000 1.5625 592-S *

HM518445 6.0000 1.5625 HM518410 E-TMHM518410759 6.2990 18750 752A *

6.2992 1.8748 753X *6.3750 1.8750 752 E-TM7526.3750 1.8750 752AA *6.6250 1.8750 753 *6.6250 1.9375 753A *6.6250 2.1250 754W *

3.5423" ID CONE BOREHM218248 5.7864 1.5748 HM218210 E-TMHM218210

5.7864 1.5748 HM218210P *6.0000 1.5748 HM218215 *

3.625" ID CONE BORE598 5.8125 1.4062 592XE *

5.8125 1.4062 592XS *5.8200 1.4062 592AX *5.9055 1.4160 JM719113 *5.9055 1.4170 593X *6.0000 1.5625 592 E-TM5926.0000 1.5625 592A E-TM592A6.0000 1.4062 592AS *6.0000 1.5625 592-S *

47890 5.7500 1.3125 47820 E-TM478205.7500 1.3125 47820XX *

3.625" ID CONE BORE (cont'd.)598 5.9500 1.3125 47823 *598A 5.8125 1.4062 592XE *


681A 6.6250 1.6250 672 E-TM6726.6250 1.6250 672A *6.6250 1.6250 672P *6.6919 1.6250 673 *6.6929 1.6250 673X *6.7500 1.6250 674 *

3.75" ID CONE BORE594 5.8125 1.4062 592XE *


683 6.6250 1.6250 672 E-TM6726.6250 1.6250 672A *6.6250 1.6250 672P *6.6919 1.6250 673 *6.6929 1.6250 673X *6.7500 1.6250 674 *

52375 6.1875 1.4375 52618 E-TM526186.2992 1.4375 52630X *6.3750 1.4375 52637 E-TM526376.3750 1.5625 52638 *6.3750 1.6250 52639 *

594A 5.8125 1.4062 592XE *5.8125 1.4062 592XS *5.8200 1.4062 592AX *5.9055 1.4160 JM719113 *5.9055 1.4170 593X *6.0000 1.5625 592 E-TM5926.0000 1.5625 592A E-TM592A6.0000 1.4062 592AS *6.0000 1.5625 592-S *




NO.OD

WIDTH NO. NO.



NO.OD

WIDTH NO. NO.



In Ascending Order

3.8125" ID CONE BORE42381 5.8437 1.1250 42584 E-TM42584

5.8437 1.1250 42584XX *5.8437 1.1250 42585 *5.8437 1.3750 42586 *5.8750 1.1250 42587 *5.9045 1.1250 42590 *

3.875" ID CONE BORE52387 6.1875 1.4375 52618 E-TM52618

6.2992 1.4375 52630X *6.3750 1.4375 52637 E-TM526376.3750 1.5625 52638 *6.3750 1.6250 52639 *

3.937" ID CONE BOREJHM720249 6.2992 1.6142 JHM720210 E-TMJHM720210

6.2992 1.6142 JHM720210P *4" ID CONE BORE687 6.6250 1.6250 672 E-TM672

6.6250 1.6250 672A *6.6250 1.6250 672P *6.6919 1.6250 673 *6.6929 1.6250 673X *6.7500 1.6250 674 *

52400 6.1875 1.4375 52618 E-TM526186.2992 1.4375 52630X *6.3750 1.4375 52637 E-TM526376.3750 1.5625 52638 *6.3750 1.6250 52639 *

4.125" ID CONE BORE782 6.8750 1.8750 772A *

7.0856 1.8750 773AA *7.0866 1.8898 773 *7.1250 1.8750 772 E-TM7727.1250 1.8750 772XX *

4.3307" ID CONE BOREJM822049 6.4961 1.3780 JM822010 E-TMJM8220104.5" ID CONE BORE64450 7.0000 1.6250 64700 E-TM64700

7.0000 1.6250 64700V *7.0079 1.6250 64701X *7.0856 1.6250 64708 *7.1250 1.6250 64713 *

4.625" ID CONE BORE68462 7.0856 1.3750 68709 *

7.1250 1.3750 68712 E-TM687127.1250 1.3750 68712RB *7.2500 1.4676 68726 *

5" ID CONE BORE48290 7.1875 1.5626 48220 E-TM48220

7.1875 1.5626 48220XX *5.25" ID CONE BORE67390 7.7500 1.8125 67322 E-TM67322

8.0000 1.8125 67320 *8.0000 1.8125 67324 *

67391 7.7500 1.8125 67322 E-TM673228.0000 1.8125 67320 *8.0000 1.8125 67324 *


CUP BEAR- CONE EUCLIDPART

CONEING PART CONE PART

NO.ID

WIDTH NO. NO.



NO.ID

WIDTH NO. NO.


BEARING IDENTIFICATION CHARTBY CUP OUTSIDE DIAMETER

In Ascending Order

1.7810" OD CUPLM11910 0.7500 0.6100 LM11949 E-TMLM11949

0.7500 0.6100 LM11949F *LM12710 0.8437 0.6100 LM12748 *

0.8437 0.6100 LM12748F *0.8656 0.6100 LM12749 E-TMLM127490.8656 0.6100 LM12749F *0.8656 0.6100 LM12749FP *

1.98" OD CUP *L44610 0.9375 0.5600 L44640 *

0.9843 0.5600 JL44642A *1.0000 0.5600 L44642 *1.0000 0.5600 L44643 E-TML446431.0000 0.5600 L44643H *1.0000 0.5600 L44643-S *1.0000 0.5600 L44643X *1.0231 0.5600 L44645 *1.0625 0.5600 L44649 E-TML446491.0625 0.5600 L44649F *1.0625 0.5600 L44649H *1.0625 0.5600 L44649-Z *

2.328" OD CUP *LM67010 1.0005 0.604 JLM67041P *

1.0630 0.6250 JLM67042 *1.1250 0.6250 LM67043 *1.2500 0.6250 LM67045 *1.2500 0.6250 LM67047 *1.2500 0.6250 LM67048 E-TMLM670481.2500 0.6250 LM67048F *1.2500 0.6250 LM67049A *

2.3612" OD CUP *L68111 1.3775 0.6250 L68149 E-TML68149

1.3775 0.6250 L68149P *1.3780 0.6250 JL68145 *

2.4375" OD CUP *15243 1.0000 0.7500 15100 *

1.0000 0.7500 15100-S *1.0000 0.7150 15100-SR *1.0000 0.7500 15101 E-TM151011.0000 0.7500 15101H *1.0000 0.7500 15102 *1.0298 0.7500 15103 *1.0300 0.7500 15103-S *1.0625 0.7500 15106 *1.1250 0.7500 15112 *1.1250 0.7150 15112R *1.1250 0.7500 15113 *1.1806 0.7150 15115 *

2.4375" OD CUP (cont'd.)15243 1.1806 0.7500 15117 *

1.1811 0.8378 NA15118-SW *1.1811 0.7500 15117X *1.1813 0.8388 NA15117-SW *1.1855 0.7500 15116 *1.1880 0.7500 15120A *1.1895 0.7500 15118 *1.1895 0.7150 15118R *1.1895 0.7500 15119 *1.1895 0.7500 15120 *1.2188 0.7150 15121T *1.2500 0.7150 15123 *1.2500 0.7500 15125 *1.2500 0.7500 15125T *1.2500 0.7855 NA15125-SW *1.2500 0.7500 15126 *

2.4409" OD CUP *15245 1.0000 0.7500 15100 *

1.0000 0.7500 15100-S *1.0000 0.7150 15100-SR *1.0000 0.7500 15101 E-TM151011.0000 0.7500 15101H *1.0000 0.7500 15102 *1.0298 0.7500 15103 *1.0300 0.7500 15103-S *1.0625 0.7500 15106 *1.1250 0.7500 15112 *1.1250 0.7150 15112R *1.1250 0.7500 15113 *1.1806 0.7150 15115 *1.1806 0.7500 15117 *1.1811 0.8378 NA15118-SW *1.1811 0.7500 15117X *1.1813 0.8388 NA15117-SW *1.1855 0.7500 15116 *1.1880 0.7500 15120A *1.1895 0.7500 15118 *1.1895 0.7150 15118R *1.1895 0.7500 15119 *1.1895 0.7500 15120 *1.2188 0.7150 15121T *1.2500 0.7150 15123 *1.2500 0.7500 15125 *1.2500 0.7500 15125T *1.2500 0.7855 NA15125-SW *1.2500 0.7500 15126 *




NO.ID

WIDTH NO. NO.



NO.ID

WIDTH NO. NO.



In Ascending Order

2.4803" OD CUP *JL69310 1.4961 0.6693 JL69345 *

1.4961 0.6693 JL69348 *1.4961 0.6693 JL69349 E-TMJL693491.4961 0.6693 JL69349A *1.4961 0.6693 JL69349AX *1.4961 0.6693 JL69349CP *1.4961 0.6693 JL69349H *1.4961 0.6693 JL69349P *1.4961 0.6693 JL69349X *1.4961 0.6693 JK149562 *

2.5312" OD CUP *M86610 1.0000 0.8438 M86643 *

1.0000 0.8438 M86643A *1.1250 0.8438 M86647 *1.2187 0.8438 M86648 *1.2187 0.8438 M86648A *1.8750 0.8438 M86649 E-TMM866491.8750 0.8438 M86649C *1.8750 0.8438 M86649H *1.8750 0.8438 M86649P *1.8750 0.8438 M86649-SP *

2.5625" OD CUP *LM48510 1.3750 0.7100 LM48548 E-TMLM48548

1.3750 0.7100 LM48548A *1.3750 0.7100 LM48548C *1.3750 0.7100 LM48548P *1.3750 0.7100 LM48549 *1.3750 0.7100 LM48549X *1.3830 0.7100 LM48545 *

2.6875" OD CUP *M88010 1.0000 0.8750 M88036 *

1.1250 0.8750 M88040 *1.1250 0.8750 M88040A *1.1875 0.8750 M88043 *1.1875 0.8750 M88044 *1.2187 0.8750 M88045 *1.2500 0.8750 M88046 *1.3125 0.8750 M88047 *1.3125 0.8750 M88048 E-TMM880481.3125 0.8750 M88048A *1.3125 0.8750 M88048-S *

2.717" OD CUP *14274 1.1806 0.7813 14118AS *

1.1811 0.7813 14118 *1.1811 1.0623 14120A *1.1811 0.7813 14117A *1.1811 0.7813 14118A *

2.717" OD CUP (cont'd.)14274 1.1900 0.7813 14116 *

1.1900 0.7813 14116W *1.1900 0.7813 14119A *1.1900 1.0623 14120 *1.1900 1.0313 14121 *1.2500 1.0623 14123A *1.2500 1.0623 14123AA *1.2500 0.7813 14123T *1.2500 0.7813 14124 *1.2500 0.7813 14124C *1.2500 0.7813 14125A *1.2500 0.7813 14125W *1.3125 0.7813 14130 *1.3125 0.7813 14130X *1.3125 0.7813 14131 *1.3125 0.7813 14131A *1.3125 0.7813 14132T *1.3750 1.6230 14136A *1.3750 1.6230 14136AA *1.3750 0.7813 14137A *1.3750 0.7813 14137AS *1.3750 0.7813 14138A *1.3750 0.7783 NA14138 *1.3770 0.7813 14139 *1.3780 0.7813 14139X *

14276 1.1806 0.7813 14118AS *1.1811 0.7813 14118 *1.1811 1.0623 14120A *1.1811 0.7813 14117A *1.1811 0.7813 14118A *1.1900 0.7813 14116 *1.1900 0.7813 14116W *1.1900 0.7813 14119A *1.1900 1.0623 14120 *1.1900 1.0313 14121 *1.2500 1.0623 14123A *1.2500 1.0623 14123AA *1.2500 0.7813 14123T *1.2500 0.7813 14124 *1.2500 0.7813 14124C *1.2500 0.7813 14125A *1.2500 0.7813 14125W *1.3125 0.7813 14130 *1.3125 0.7813 14130X *1.3125 0.7813 14131 *1.3125 0.7813 14131A *1.3125 0.7813 14132T *





NO.ID

WIDTH NO. NO.



NO.ID

WIDTH NO. NO.



In Ascending Order

2.717" OD CUP (cont'd.)14276 1.3750 1.6230 14136A *

1.3750 1.6230 14136AA *1.3750 0.7813 14137A *1.3750 0.7813 14137AS *1.3750 0.7813 14138A *1.3750 0.7783 NA14138 *1.3770 0.7813 14139 *1.3780 0.7813 14139X *

2.8438" OD CUPHM88610 1.0000 1.0000 HM88630 *

1.2500 1.0000 HM88644 *1.2500 1.0000 HM88644A *1.2593 1.0000 HM88638 *1.3750 1.0000 HM88649 E-TMHM886491.3750 1.0000 HM88649A *1.3750 1.0000 HM88649C *1.3750 1.0000 HM88649H *1.3750 1.0000 HM88649HP *1.4062 1.0000 HM88648 *

2.875" OD CUP *25820 1.3750 0.9375 25877 E-TM25877

1.3750 0.9375 25877A *1.3750 0.9375 25877T *1.3750 0.9375 25878 *1.4365 0.9375 25880 E-TM25880

25821 1.3750 0.9375 25877 E-TM258771.3750 0.9375 25877A *1.3750 0.9375 25877T *1.3750 0.9375 25878 *1.4365 0.9375 25880 E-TM25880

2.891" OD CUP *LM102910 1.7812 0.7700 LM102949 E-TMLM102949

1.7812 0.7700 LM102949CP *1.7812 0.7700 LM102949P *

LM501310 1.6250 0.7700 LM501349 E-TMLM5013491.6250 0.7700 LM501349A *1.6250 0.7700 LM501349HP *

LM501314 1.6250 0.8437 LM501349 E-TMLM5013493" OD CUP *2720 1.2500 0.9362 2783 *

1.3125 0.9362 2785 *1.3125 0.9362 2785W *1.3125 0.9362 2790 *1.3750 0.9362 2786 *1.3750 0.9362 2787T *1.3750 0.9362 2793 *1.3750 0.9362 2796 *

3" OD CUP (cont'd.)2720 1.3770 0.9362 2775 *

1.4058 0.9362 2791A *1.4365 0.9362 2780 *1.4365 0.9362 2794 *1.4855 0.9362 2798T *1.5000 0.9362 2776 *1.5000 0.9362 2777 *1.5000 0.9362 2788 *1.5000 0.9362 2788A *1.5000 0.9362 2788W *1.5000 0.9362 2799W *1.5625 0.9362 2789 *

31520 1.3125 1.1563 31590 *1.3750 1.1563 31593 *1.3750 1.1563 31594 *1.4375 1.1563 31597 E-TM31597

HM89410 1.2500 1.1563 HM89440 *1.3125 1.1563 HM89443 *1.3125 1.1563 HM89444 *1.3750 1.1563 HM89446 *1.3750 1.1563 HM89446A *1.3750 1.1563 HM89446P *1.4375 1.1563 HM89448 *1.4375 1.1563 HM89449 E-TMHM89449

3.0625" OD CUP *LM603011 1.7717 0.8466 JLM603048F *

1.7812 0.7812 LM603049 E-TMLM6030491.7812 0.7812 LM603049AS *

3.2283" OD CUP *JLM104910 1.9134 0.8465 JLM104942A *

1.9680 0.8652 LM104947A *1.9685 0.8465 JLM104945 *1.9685 0.8465 JLM104946 *1.9685 0.8465 JLM104948 E-TMJLM1049482.0000 0.8652 LM104949 E-TMLM1049492.0000 0.8652 LM104949E *2.0000 0.8652 LM104949P *

3.25" OD CUP *HM801310 1.5000 1.1563 HM801346 *

1.5000 1.1563 HM801346X E-TMHM801346X1.5000 1.1563 HM801346XV *1.5938 1.1563 HM801349 *1.5938 1.1563 HM801349H *1.5938 1.1563 HM801349V *

LM104911 1.9134 0.8313 JLM104942A *1.9680 0.8500 LM104947A *1.9685 0.8313 JLM104945 *





NO.ID

WIDTH NO. NO.



NO.ID

WIDTH NO. NO.



In Ascending Order

3.25" OD CUP (cont'd.)LM104911 1.9685 0.8313 JLM104946 *

1.9685 0.8313 JLM104948 E-TMJLM1049482.0000 0.8500 LM104949 E-TMLM1049492.0000 0.8500 LM104949E *2.0000 0.8500 LM104949P *

M802011 1.6250 1.0450 M802047 *1.6250 1.0450 M802048 E-TMM8020481.6250 1.0450 M802048AH *1.6250 1.0450 M802048CP *

3.265" OD CUP *25520 1.4375 0.9375 25570 *

1.5000 0.9375 25572 *1.6875 0.9375 25576 *

3.265" OD CUP25520 1.6875 0.9375 25578 *

1.6880 0.9375 25577 *1.6880 0.9375 25577C *1.7500 0.9375 25580 *1.7500 0.9375 25580A *1.7500 0.9375 25581 *1.7500 0.9375 25582 *1.7500 1.3500 25583 *1.7710 0.9375 25584 E-TM255841.7712 0.9375 25584A *1.7708 0.9375 25584T *1.7960 0.9375 25590 E-TM255901.8125 0.9375 25592 *

25523 1.4375 1.0625 25570 *1.5000 1.0625 25572 *1.6875 1.0625 25576 *1.6880 1.0625 25577 *1.6880 1.0625 25577C *1.6875 1.0625 25578 *1.7500 1.0625 25580 *1.7500 1.0625 25580A *1.7500 1.0625 25581 *1.7500 1.0625 25582 *1.7500 1.4750 25583 *1.7710 1.0625 25584 E-TM255841.7712 1.0625 25584A *1.7708 1.0625 25584T *1.7960 1.0625 25590 E-TM255901.8125 1.0625 25592 *

3.3465" OD CUP *18720 1.8125 0.6875 18780 *

2.0000 0.6875 18790 *

3.4375" OD CUP *3525 1.1875 1.0627 356 *

1.3750 1.1875 3581 *1.5000 1.1875 3580 *1.5000 1.1875 3583 *1.5625 1.1875 3575T *1.5748 1.0627 350 *1.5748 1.0627 357 *1.5748 1.1875 3582 *1.5748 1.0627 350A *1.5748 1.0592 NA357 *1.6250 1.1875 3576 *1.6250 1.1875 3577 *1.6250 1.1875 3585 E-TM35851.6875 1.1875 3579 *1.7500 1.0627 355 *1.7500 1.1875 3578 *1.7500 1.0627 355A *1.7500 1.0627 355X *1.7500 1.1875 3578A *1.7500 1.1875 3578AA *1.7717 1.0627 358 *1.7717 1.0627 358A *1.7717 1.0627 358X *1.7810 1.1875 3586 *1.7810 1.1875 3586V *1.8125 1.0627 359A *1.8125 1.0627 359-S *1.8125 1.0627 359-SH *1.8125 1.0627 359T *

3.4843" OD CUP *44348 1.2500 1.0000 44126 *

1.3125 1.0000 44131 *1.4375 1.0000 44143 E-TM441431.4375 1.0000 44143W *1.4375 0.9985 NA44143 *1.5000 1.0000 44150 *1.5625 1.0000 44156 *1.5625 0.9985 NA44156 *1.5625 1.0000 44158 *1.5748 1.0000 44157 *1.5748 0.9750 44157X *1.6250 1.0000 44162 *1.6250 0.9985 NA44163 *

3.5" OD CUP *HM803110 1.6250 1.1875 HM803145 *

1.6250 1.1875 HM803146 E-TMHM8031461.7500 1.1875 HM803149 E-TMHM803149





NO.ID

WIDTH NO. NO.



NO.ID

WIDTH NO. NO.



In Ascending Order

3.5" OD CUP (cont'd.) *HM803110 1.7717 1.1875 JHM803148 *M804010 1.7717 1.0000 JM804045 *

1.8750 1.0000 M804048 *1.8750 1.0000 M804049 E-TMM804049

3.5433" OD CUP *JLM506810 2.1654 0.9055 JLM506848E *

2.1654 0.9055 JLM506849 E-TMJLM5068492.1654 0.9055 JLM506849A *2.1654 0.9055 JLM506849V *

3.6718" OD CUP *3720 1.3750 1.4375 3751 *

1.5625 1.1875 3774 *1.6250 1.4375 3753 *1.7500 1.4375 3760 *1.7500 1.1875 3782 E-TM37821.7500 1.1875 3783 *1.7710 1.1875 3776 *1.7717 1.0625 376 *1.7717 1.0625 376A *1.7717 1.0625 376X *1.8125 1.1875 3777 *1.8750 1.1875 3778 *1.8750 1.1875 3779 *1.9060 1.1875 3781A *1.9375 1.1875 3781 *1.9680 1.0625 378A *1.9687 1.4375 3750T *2.0000 1.0625 375 *2.0000 1.4375 3762 *2.0000 1.1875 3775 *2.0000 1.1875 3780 E-TM37802.0000 1.1875 3784 *2.0000 1.1875 3795 *2.0000 1.0625 375-S *2.0000 1.0625 375W *2.0000 1.1875 3780V *2.0000 1.1875 3780W *2.0000 1.1830 NA3780 *2.0000 1.1820 NA3780-SW *2.0312 1.0625 377-S *2.0625 1.0625 377 *2.0625 1.0625 380 *2.0625 1.1875 3767 E-TM37672.0625 1.1875 3767A *2.0625 1.1875 3767AA *2.0625 1.1875 3767W *2.0625 1.0625 377A *

3.7402" OD CUP *JM207010 2.1654 1.1417 JM207049 E-TMJM207049

2.1654 1.1417 JM207049A E-TMJM207049A3.75" OD CUP *HM804810 1.6250 1.1875 HM804840 E-TMHM804840

1.7500 1.1875 HM804842 *1.7500 1.1875 HM804843 *1.8750 1.1875 HM804846 E-TMHM8048461.9060 1.1875 HM804848 *1.9060 1.1875 HM804848A *1.9060 1.1875 HM804849 *

HM903210 1.5000 1.2188 HM903241 *1.6250 1.2188 HM903244 E-TMHM9032441.6250 1.2188 HM903245 *1.7500 1.2188 HM903247 *1.7500 1.2188 HM903249 E-TMHM9032491.7500 1.2188 HM903249A E-TMHM903249A1.7712 1.2188 HM903248 *

3.8125" OD CUP *382A 1.7500 0.8268 386AS *

1.8750 0.8268 386A E-TM386A1.8750 0.8268 386AX *2.0000 0.8268 385A E-TM385A2.0000 0.8268 385AS *2.0000 0.8268 385AX *2.1250 0.8268 389A *2.1250 0.8268 389AS *2.1250 0.8268 389AW *2.1649 0.8733 NA385-SW *2.1649 0.8733 NA385-SWV *2.1649 0.8733 NA386-SWV *2.1654 0.8268 385 *2.1654 0.8268 385AA *2.1654 0.8268 385X *2.1654 0.8223 NA385 *2.1840 0.8268 386 *2.1880 0.8268 389 *2.1880 0.8223 389-S *2.1880 0.8268 389WXX *2.2500 0.8268 387 E-TM3872.2500 0.8268 387A E-TM387A2.2500 0.8268 387AH *2.2500 0.8268 387AS E-TM387AS2.2500 0.8268 387-S *2.2500 0.8268 387W *2.2650 0.8268 388A *2.2827 0.8268 388XS *




NO.ID

WIDTH NO. NO.



NO.ID

WIDTH NO. NO.



In Ascending Order

3.8437" OD CUP *28622 2.0000 0.9688 28678 *

2.1875 0.9688 28680 *2.2500 0.9688 28682 E-TM286822.2500 0.9688 28682P *

3.875" OD CUP *382 1.7500 0.8268 386AS *

1.8750 0.8268 386A E-TM386A1.8750 0.8268 386AX *2.0000 0.8268 385A E-TM385A2.0000 0.8268 385AS *2.0000 0.8268 385AX *2.1250 0.8268 389A *2.1250 0.8268 389AS *2.1250 0.8268 389AW *2.1649 0.8733 NA385-SW *2.1649 0.8733 NA385-SWV *2.1649 0.8733 NA386-SWV *2.1654 0.8268 385 *2.1654 0.8268 385AA *2.1654 0.8268 385X *2.1654 0.8223 NA385 *2.1840 0.8268 386 *2.1880 0.8268 389 *2.1880 0.8223 389-S *2.1880 0.8268 389WXX *2.2500 0.8268 387 E-TM3872.2500 0.8268 387A E-TM387A2.2500 0.8268 387AH *2.2500 0.8268 387AS E-TM387AS2.2500 0.8268 387-S *2.2500 0.8268 387W *2.2650 0.8268 388A *2.2827 0.8268 388XS *

3732 1.6250 1.4375 3753 *1.3750 1.4375 3751 *1.5625 1.1875 3774 *1.7500 1.4375 3760 *1.7500 1.1875 3782 E-TM37821.7500 1.1875 3783 *1.7710 1.1875 3776 *1.8125 1.1875 3777 *1.8750 1.1875 3778 *1.8750 1.1875 3779 *1.9060 1.1875 3781A *1.9375 1.1875 3781 *1.9687 1.4375 3750T *2.0000 1.4375 3762 *

3.875" OD CUP (cont'd.)3732 2.0000 1.1875 3775 *

2.0000 1.1875 3780 E-TM37802.0000 1.1875 3784 *2.0000 1.1875 3795 *2.0000 1.1875 3780V *2.0000 1.1875 3780W *2.0000 1.1830 NA3780 *2.0000 1.1820 NA3780-SW *2.0625 1.1875 3767 E-TM37672.0625 1.1875 3767A *2.0625 1.1875 3767AA *2.0625 1.1875 3767W *

4" OD CUP *49520 1.7500 1.2500 49576 *

1.7500 1.2500 49577 *1.8750 1.2500 49580 *1.8750 1.2500 49581 *2.0000 1.2500 49585 E-TM49585

522 1.5000 1.3750 525 *1.5000 1.3750 525X *1.5625 1.3750 525A *1.6250 1.3750 526 *1.6250 1.3750 526A *1.7500 1.3750 527 *1.7500 1.3750 527AS *1.7710 1.3750 527-S *1.7713 1.5175 V527A *1.8750 1.3750 528 E-TM5281.8750 1.3750 528A *1.8750 1.3750 528R *1.9685 1.3750 529A *2.0000 1.3750 529 *2.0000 1.3750 529X *

4.125" OD CUP *45220 1.7500 1.1875 45280 E-TM45280

1.8750 1.1875 45282 *2.0000 1.1875 45284 E-TM452842.0000 1.1875 45285 *2.0000 1.1875 45285A *2.1250 1.1875 45287 *2.2500 1.1875 45289 *2.2500 1.1875 45290 *2.2500 1.1875 45291 E-TM452912.2500 1.1875 45290CA *

59412 1.6250 1.4375 59162 *1.7500 1.4375 59175 *1.7500 1.4375 59176 *





NO.ID

WIDTH NO. NO.



NO.ID

WIDTH NO. NO.



In Ascending Order

4.125" OD CUP (cont'd.)59412 1.8750 1.4375 59187 *

1.8750 1.4375 59188 *2.0000 1.4375 59200 *2.0000 1.4375 59201 *2.0000 1.4375 59201T *

453X 1.5000 1.1875 455A *1.5625 1.1875 457 *1.5748 1.1875 459 *1.6250 1.1875 464 *1.6250 1.1875 464A *1.6870 1.1875 461 *1.7500 1.1875 458 *1.7500 1.1875 460 *1.7717 1.1875 458-S *1.8750 1.1875 463 *1.8750 1.1875 467 *1.9685 1.1875 465 *2.0000 1.1875 455 *2.0000 1.1875 455-S *2.0000 1.1875 455W *2.0000 1.1835 NA455 *2.0000 1.1820 NA455-SW *2.0000 1.3695 NA456-SW *2.0625 1.1875 468 *2.0625 1.1875 468W *2.1250 1.1875 456 *2.1250 1.1875 456W *2.1649 1.1875 466 *2.1875 1.1875 466-S *2.2500 1.1875 462 *2.2500 1.1875 469 E-TM4692.2500 1.1875 462A *2.2500 1.1875 462W *2.2500 1.1875 469A *2.2500 1.1875 469-S *

HM807010 1.6250 1.4375 HM807035 *1.7500 1.4375 HM807040 E-TMHM8070401.7500 1.4375 HM807040P *1.9375 1.4375 HM807044 E-TMHM8070441.9685 1.4425 JHM807045 *2.0000 1.4375 HM807046 E-TMHM8070462.0000 1.4375 HM807046XX *2.0000 1.4375 HM807047 *2.1250 1.4375 HM807049 E-TMHM8070492.1250 1.4375 HM807049A *2.1250 1.4375 HM807049XX *2.1452 1.4375 HM807048 *

4.1339" OD CUP *JLM710910 2.5591 0.9449 JLM710949C E-TMJLM710949C4.3307" OD CUP *394A 1.7712 0.8661 396A *

1.9685 0.8661 396 E-TM3962.0000 0.8661 398 *2.2500 0.8661 390 E-TM3902.3622 0.8661 397 *2.3622 0.8661 397W *2.3622 0.8621 NA397 *2.4375 0.8661 392 *2.4375 0.8661 392E *2.5000 0.8661 395 E-TM3952.5000 0.8661 390A E-TM390A2.5000 0.8661 395X *2.5000 0.8661 395XA *2.5580 0.8661 396-S *2.5591 0.8661 399 *2.6250 0.8661 395A E-TM395A2.6250 0.9231 395CS *2.6250 0.8661 395-S *2.6250 0.9237 395WE *2.6875 0.8661 399A *2.6875 0.8661 399AS *2.6875 1.4311 399AX *

JM511910 2.5591 1.1024 JM511945 E-TMJM5119452.5591 1.1024 JM511946 E-TMJM511946

4.375" OD CUP *55437 1.7500 1.1875 55175 *

1.7500 1.1875 55176 E-TM551761.7500 1.1875 55175C *1.7500 1.1875 55176C *1.8750 1.1875 55187 *1.8750 1.1875 55187C *1.9675 1.1875 55196 *1.9675 1.1875 55197 *1.9680 1.1875 55194 *1.9680 1.1875 55195 *1.9680 1.2500 55194X *2.0000 1.1875 55200 *2.0000 1.1875 55200C E-TM55200C2.0000 1.1855 NA55200 *2.0000 1.1855 NA55200-SW *2.0625 1.1875 55206 *2.0625 1.1875 55206C E-TM55206C2.1250 1.1875 55212C *





NO.ID

WIDTH NO. NO.



NO.ID

WIDTH NO. NO.



In Ascending Order

4.4375" OD CUP *3920 1.7712 1.0617 396A *

1.9685 1.0617 396 E-TM3962.0000 1.0617 398 *2.0000 1.1875 3975 *2.0625 1.4375 3959 *2.2500 1.0617 390 E-TM3902.2500 1.4375 3958 *2.2500 1.1875 3979 E-TM39792.3125 1.1875 3981 *2.3437 1.1875 3978 *2.3617 1.1875 3977X *2.3622 1.0617 397 *2.3622 1.1875 3977 *2.3622 1.0617 397W *2.3622 1.0577 NA397 *2.3750 1.4375 3960 *2.3750 1.1875 3980 *2.3750 1.1875 3980W *2.4375 1.0617 392 E-TM3922.4375 1.0617 392E *2.5000 1.0617 395 E-TM3952.5000 1.4375 3955 *2.5000 1.1875 3982 E-TM39822.5000 1.0617 390A E-TM390A2.5000 1.0617 395X *2.5000 1.0617 395XA *2.5000 1.1875 3982W *2.5000 1.1875 3982X *2.5580 1.0617 396-S *2.5591 1.0617 399 *2.5591 1.1425 JM511945 E-TMJM5119452.5591 1.1425 JM511946 E-TMJM5119462.6250 1.1875 3984 E-TM39842.6250 1.1550 3992 E-TM39922.6250 1.1875 3994 E-TM39942.6250 1.0617 395A E-TM395A2.6250 1.1187 395CS *2.6250 1.0617 395-S *2.6250 1.1193 395WE *2.6250 1.1875 3984XX *2.6875 1.0617 399A *2.6875 1.0617 399AS *2.6875 1.6267 399AX *

3925 2.0000 1.1875 3975 *2.0625 1.4375 3959 *2.2500 1.4375 3958 *2.2500 1.1875 3979 E-TM3979

4.4375" OD CUP (cont'd.)3925 2.3125 1.1875 3981 *

2.3437 1.1875 3978 *2.3617 1.1875 3977X *2.3622 1.1875 3977 *2.3750 1.4375 3960 *2.3750 1.1875 3980 *2.3750 1.1875 3980W *2.5000 1.4375 3955 *2.5000 1.1875 3982 E-TM39822.5000 1.1875 3982W *2.5000 1.1875 3982X *2.6250 1.1875 3984 E-TM39842.6250 1.1550 3992 E-TM39922.6250 1.1875 3994 E-TM39942.6250 1.1875 3984XX *

29620 2.2500 1.0000 29665 *2.5000 1.0000 29670 *2.7500 1.0000 29675 E-TM296752.7500 1.0000 69675V *2.7500 1.0000 29676 *2.7559 1.0000 29677 *2.7810 1.0000 29680 *2.7810 1.0000 29681 *2.8750 1.0000 29685 E-TM296852.8750 1.0000 29685V *2.9062 1.0000 29688 *

39520 2.0000 1.1875 39573 *2.0000 1.1875 39575 *2.1250 1.1875 39578 *2.2500 1.4575 3958 *2.2500 1.1875 39580 E-TM395802.2500 1.1875 39581 E-TM395812.3622 1.1875 39582A *2.3622 1.1875 J39582 *2.5000 1.1875 39585 E-TM395852.5000 1.1875 39585A *2.5000 1.1875 39585P *2.5000 1.1875 39585XX *2.5586 1.1875 39586 *2.6240 1.1875 39590A *2.6250 1.1875 39589 *2.6250 1.1875 39590 E-TM395902.6250 1.1875 39591 *2.6250 1.1875 39590XX *

55443 1.7500 1.1875 55175 *1.7500 1.1875 55176 E-TM551761.7500 1.1875 55175C *





NO.ID

WIDTH NO. NO.



NO.ID

WIDTH NO. NO.



In Ascending Order

4.4375" OD CUP (cont'd.)55443 1.7500 1.1875 55176C *

1.8750 1.1875 55187 *1.8750 1.1875 55187C *1.9675 1.1875 55196 *1.9675 1.1875 55197 *1.9680 1.1875 55194 *1.9680 1.1875 55195 *1.9680 1.2500 55194X *2.0000 1.1875 55200 *2.0000 1.1875 55200C E-TM55200C2.0000 1.1855 NA55200 *2.0000 1.1855 NA55200-SW *2.0625 1.1875 55206 *2.0625 1.1875 55206C E-TM55206C2.1250 1.1875 55212C *

4.468" OD CUP *394CS 1.7712 0.8661 396A *

1.9685 0.8661 396 E-TM3962.0000 0.8661 398 *2.2500 0.8661 390 E-TM3902.3622 0.8661 397 *2.3622 0.8661 397W *2.3622 0.8621 NA397 *2.4375 0.8661 392 E-TM3922.4375 0.8661 392E *2.5000 0.8661 395 E-TM3952.5000 0.8661 390A E-TM390A2.5000 0.8661 395X *2.5000 0.8661 395XA *2.5580 0.8661 396-S *2.5591 0.8661 399 *2.6250 0.8661 395A E-TM395A2.6250 0.9231 395CS *2.6250 0.8661 395-S *2.6250 0.9237 395WE *2.6875 0.8661 399A *2.6875 0.8661 399AS *2.6875 1.4311 399AX *

4.5" OD CUP *HH506310 1.9375 1.7500 HH506348 E-TMHH506348

1.9680 1.7500 HH506349 *4.5276" OD CUP *JLM714110 2.9528 0.9843 JLM714149 E-TMJLM714149

2.9528 0.9843 JLM714149A *JM612910 2.7559 1.1417 JM612949 E-TMJM612949

4.625" OD CUP *33462 2.2500 1.1875 33225 *

2.5000 1.1875 33251 *2.6250 1.1875 33261 *2.6250 1.1875 33262 *2.6250 1.1875 33262A *2.6875 1.1875 33269 *2.7500 1.1875 33275 E-TM332752.7500 1.1875 33275W *2.8125 1.1875 33281 E-TM332812.8750 1.1875 33287 E-TM332872.8750 1.1875 33287A *

66462 1.8750 1.3125 66187 *2.0000 1.3125 66200 *2.1250 1.3125 66212 *2.1250 1.3100 NA66212 *2.2500 1.3125 66225 E-TM66225

4.7244" OD CUP *33472 2.2500 1.1730 33225 *

2.5000 1.1730 33251 *2.6250 1.1730 33261 *2.6250 1.1730 33262 *2.6250 1.1730 33262A *2.6875 1.1730 33269 *2.7500 1.1730 33275 E-TM332752.7500 1.1730 33275W *2.8125 1.1730 33281 E-TM332812.8750 1.1730 33287 E-TM332872.8750 1.1730 33287A *

47420 2.7500 1.2813 47487 *2.8125 1.2813 47490 E-TM47490

JH211710 2.5591 1.5354 JH211749 E-TMJH2117492.5591 1.5354 JH211749A *2.5591 1.5748 JH211749E *

4.75" OD CUP *29630 2.2500 1.0000 29665 *

2.5000 1.0000 29670 *2.7500 1.0000 29675 E-TM296752.7500 1.0000 29675V *2.7500 1.0000 29676 *2.7559 1.0000 29677 *2.7810 1.0000 29680 *2.7810 1.0000 29681 *2.8750 1.0000 29685 E-TM296852.8750 1.0000 29685V *2.9062 1.0000 29688 *




NO.ID

WIDTH NO. NO.



NO.ID

WIDTH NO. NO.



In Ascending Order

4.7812" OD CUP *34478 2.7540 0.9688 34274 *

2.7540 0.9688 37274W *2.7559 0.9688 34275 *2.7559 0.9688 34275HV *2.9518 0.9688 34294 *2.9921 0.9688 34299X *3.0000 0.9688 34300 *3.0000 0.9688 34300A *3.0000 0.9688 34301 *3.0455 0.9688 34304 *3.0625 0.9688 34306 *3.0625 0.9688 34306W *3.0625 0.9688 34307 *

4.8125" OD CUP *HM212011 2.3750 1.5000 HM212044 E-TMHM212044

2.5000 1.5000 HM212046 E-TMHM2120462.5000 1.5000 HM212046C *2.5000 1.5000 HM212047 E-TMHM2120472.6250 1.5000 HM212049 E-TMHM2120492.6250 1.5000 HM212049A *2.6250 1.5000 HM212049V *2.6250 1.5000 HM212049X E-TMHM212049X

4.875" OD CUP *72487 1.8750 1.4375 72187 *

1.8750 1.4375 72188 *1.8750 1.4375 72187C *1.8750 1.4375 72188C E-TM72188C2.0000 1.4375 72200 *2.0000 1.4375 72200C E-TM72200C2.0000 1.4375 72201C *2.1250 1.4375 72212 *2.1250 1.4375 72212AC *2.1250 1.4375 72212C E-TM72212C2.1250 1.4375 72213C *2.1250 1.4350 NA72212 *2.1250 1.4350 NA72212C *2.1875 1.4375 72218 *2.1875 1.4375 72218C E-TM72218C2.1875 1.4375 72219C *2.2500 1.4375 72225 *2.2500 1.4375 72225C E-TM72225C

552A 2.0000 1.5000 555 *2.1250 1.5000 557-S E-TM557-S2.1250 1.5000 557X *2.1654 1.5000 557 *2.2500 1.5000 555-S E-TM555-S2.3617 1.5000 558-S *

4.875" OD CUP552A 2.3622 1.5000 558X *

2.3750 1.5000 558 *2.3750 1.5000 557A *2.3750 1.5000 558A *2.3750 1.4955 NA558 *2.3750 1.4955 NA558-SW *2.4375 1.5000 554 *2.5000 1.5000 559 *2.5000 1.5000 559A *2.6250 1.5000 560 *2.6875 1.5000 560-S *

4.9375" OD CUP *27620 2.8750 1.0000 27680 *

3.0000 1.0000 27684 *3.0000 1.0000 27684A *3.2444 0.9955 NA27686T *3.2500 1.0000 27687 E-TM276873.2813 1.0000 27688H *3.2813 1.0000 27689 *3.2813 1.0000 27689H *3.2813 1.0000 27690 *3.2813 1.0000 27691 *3.3015 0.9955 NA27691T *3.3455 1.0000 27695 *

5" OD CUP *563 2.5000 1.4375 565 *

2.5000 1.4375 565-S *2.5576 1.4375 569 *2.6250 1.4325 NA569 *2.6875 1.4375 570 *2.7500 1.4375 566 *2.7500 1.4375 566-S *2.7500 1.4375 566W *2.7500 1.4375 566X *2.7559 1.4375 570X *2.8115 1.4375 567AA *2.8125 1.4375 567A *2.8125 1.4375 567-S *2.8750 1.4375 567 E-TM5672.8750 1.4375 567W *2.8750 1.4375 567X *2.8750 1.4375 567XA *2.8750 1.4375 NA567 *2.9062 1.4375 568 *2.9062 1.4375 568W *2.9528 1.4375 568X *2.9690 1.4375 568T *





NO.ID

WIDTH NO. NO.



NO.ID

WIDTH NO. NO.



In Ascending Order

5" OD CUP (cont'd.)42620 2.8750 1.1875 42683 *

2.9523 1.1875 43686 *3.0000 1.1875 42687 E-TM426873.0000 1.1875 42687A *3.0000 1.1875 42688 E-TM426883.0625 1.1875 42690 *3.0625 1.1875 42690H *

65500 2.0000 1.7500 65200 *2.0000 1.7500 65201 *2.1250 1.7500 65212 *2.2500 1.7500 65225 E-TM652252.3125 1.7500 65231 *2.3575 1.7500 65235 *2.3750 1.7500 65237 E-TM652372.3750 1.7500 65237A *

HM813810 2.0000 1.4375 HM813836 *2.1875 1.4375 HM813840 *2.3617 1.4375 HM813839 *2.3750 1.4375 HM813841 *2.3750 1.4375 HM813841A *2.4375 1.4375 HM813843 E-TMHM8138432.5000 1.4375 HM813842 *2.5000 1.4375 HM813842A *2.6250 1.4375 HM813844 E-TMHM8138442.7500 1.4375 HM813846 *2.8125 1.4375 HM813849 *

5.1181" OD CUP *JM515610 3.1496 1.4961 JM515648 *

3.1496 1.3780 JM515649 E-TMJM515649JM716610 3.3465 1.1811 JM716648 *

3.3465 1.1811 JM716649 E-TMJM7166495.125" OD CUP *633 2.1250 1.6250 636 *

2.2500 1.6250 635 *2.3750 1.6250 637 *2.5000 1.6250 639 *2.5000 1.8120 639A *2.5000 1.6250 639X *2.6250 1.6250 641 E-TM6412.6875 1.6250 642 *2.7500 1.6250 643 E-TM6432.7500 1.6195 NA643 *2.7500 1.6180 NA643-SW *2.7554 1.6180 NA646-SW *2.8125 1.6250 644 *2.8125 1.6250 645 *2.8125 1.6250 645X *

5.125" OD CUP (cont'd.)HM911210 2.1250 1.4375 HM911242 E-TMHM911242

2.1250 1.3425 HM911243 *2.3617 1.3425 HM911244 *2.3750 1.4375 HM911245 E-TMHM9112452.4375 1.4375 HM911249 *

5.25" OD CUP *47620 2.8125 1.3125 47675 *

3.0000 1.3125 47678 *3.0000 1.3125 47679 E-TM476793.0000 1.3125 47679W *3.0000 1.3125 47680 *3.1875 1.3125 47681 *3.2500 1.3125 47685 *3.2500 1.3125 47686 E-TM476863.2500 1.3125 47686XX *3.2500 1.3125 47687 *3.2813 1.3125 47688 *

492A 2.6250 1.1875 495AA *2.8125 1.1875 495-S *2.9528 1.1875 497X *3.0000 1.1875 495A *3.0000 1.1875 495AX E-TM495AX3.0000 1.1830 NA495A *3.0000 1.1830 NA495-SW *3.0625 1.1875 495AS *3.1490 1.1875 496X *3.1875 1.1875 496 E-TM4963.1875 1.1875 496P *3.1875 1.1875 496V *3.2165 1.1875 496AS *3.2500 1.1875 495 E-TM4953.2500 1.1875 495W *3.2500 1.1875 495XA *3.3125 1.1875 498 E-TM4983.3125 1.1875 498W *3.3455 1.1875 499A *3.3750 1.1875 497 E-TM4973.3750 1.1875 497A *3.3750 1.1875 497P *3.3750 1.1875 497W *3.3750 1.2455 NA497-SW *3.4445 1.1875 499T *

HM516410 3.0000 1.5625 HM516442 *3.1875 1.5625 HM516447 *3.2500 1.5625 HM516448 *3.2500 1.5625 HM516449C E-TMHM516449C




NO.ID

WIDTH NO. NO.



NO.ID

WIDTH NO. NO.



In Ascending Order

5.3438" OD CUP *5735 2.8750 2.0000 5752 *

3.0000 2.0000 5755 *3.0000 1.7500 5760 E-TM57603.0625 1.7500 5795 *3.1875 2.0000 5757T *3.1875 1.7500 5784T *

5.3447" OD CUP *6320 2.1580 2.1250 6380 *

2.1649 2.1250 6381 *2.2500 2.1250 6375 *2.2500 2.1250 6387 *2.3617 2.1250 6391 *2.3622 2.1250 6361 *2.3750 2.1250 6376 *2.5000 2.1250 6382 *2.5580 2.1250 6385 *2.5591 2.1250 6385-S *2.5591 2.1250 J6392 *2.5625 2.5000 6377 *2.5625 2.1250 6379 E-TM63792.5625 2.5000 6377A *2.6250 2.1250 6386 *2.6250 2.1250 6389 E-TM63892.6250 2.1250 6386A *2.6250 2.1250 6386V *

5.375" OD CUP *493 2.6250 1.1875 495AA *

2.8125 1.1875 495-S *2.9528 1.1875 497X *3.0000 1.1875 495A *3.0000 1.1875 495AX E-TM495AX3.0000 1.1830 NA495A *3.0000 1.1830 NA495-SW *3.0625 1.1875 495AS *3.1490 1.1875 496X *3.1875 1.1875 496 E-TM4963.1875 1.1875 496P *3.1875 1.1875 496V *3.2165 1.1875 496AS *3.2500 1.1875 495 E-TM4953.2500 1.1875 495W *3.2500 1.1875 495XA *3.3125 1.1875 498 E-TM4983.3125 1.1875 498W *3.3455 1.1875 499A *3.3750 1.1875 497 E-TM4973.3750 1.1875 497A *

5.375" OD CUP (cont'd.) *493 3.3750 1.1875 497P *

3.3750 1.1875 497W *3.3750 1.2455 NA497-SW *3.4445 1.1875 499T *

632 2.1250 1.6250 636 *2.2500 1.6250 635 *2.3750 1.6250 637 *2.5000 1.6250 639 *2.5000 1.8120 639A *2.5000 1.6250 639X *2.6250 1.6250 641 E-TM6412.6875 1.6250 642 *2.7500 1.6250 643 E-TM6432.7500 1.6195 NA643 *2.7500 1.6180 NA643-SW *2.7554 1.6180 NA646-SW *2.8125 1.6250 644 *2.8125 1.6250 645 *2.8125 1.6250 645X *

H414210 2.5000 1.6250 H414235 *2.5000 1.6250 H414236 *2.6250 1.6250 H414242 *2.6875 1.6250 H414245 *2.6875 1.6250 H414245X *2.8125 1.6250 H414249 E-TMH414249

H715311 2.3750 1.8125 H715332 *2.4375 1.8125 H715334 E-TMH7153342.5000 1.8125 H715336 *2.5625 1.8125 H715340 *2.6250 1.8125 H715341 E-TMH7153412.6250 1.8125 H715341A *2.6875 1.8125 H715343 E-TMH7153432.7500 1.8125 H715344 *2.7554 1.8125 H715347 *2.8125 1.8125 H715345 E-TMH7153452.8125 1.8125 H715345P *2.8125 1.8125 H715345XX *3.0000 1.8125 H715346 *3.0000 1.8125 H715346P *3.0000 1.8125 H715346XX *3.0625 1.8125 H715348 *3.0625 1.8125 H715348P *

5.5115" OD CUP *572 2.8750 1.4375 576 *

2.8750 1.4375 576W *

2.9375 1.4375 577 *

3.0000 1.4375 575 *





NO.ID

WIDTH NO. NO.



NO.ID

WIDTH NO. NO.



In Ascending Order

5.5115" OD CUP (cont'd.) *572 3.0000 1.4375 575-S *

3.0000 1.4375 575W *

3.1490 1.4375 578 *

3.1490 1.4375 578X *

3.1493 1.4375 578W *

3.1875 1.4375 581 *

3.1875 1.4375 581W *

3.2500 1.4375 580 E-TM5803.2500 1.4375 582 E-TM5823.2500 1.4375 580V *

3.2500 1.4375 580W *

3.2500 1.4375 580WA *

3.2500 1.4375 580X *

3.2500 1.4375 582XX *

3.2500 1.4325 NA580 *

3.2500 1.6200 NA580-SW *

5.513" OD CUP78551 2.1250 1.4375 78214 *

2.1250 1.4375 78214C *2.1250 1.4375 78215 *2.1250 1.4375 78215C E-TM78215C2.2500 1.4375 78225 *2.2500 1.4375 78225C *2.3750 1.4375 78238 *2.3750 1.4375 78238C *2.5000 1.4375 78250 *2.5000 1.4375 78248C *2.5000 1.4375 78250AC E-TM78250AC2.5000 1.4350 NA78250 *2.5586 1.4375 78255X *

5.75" OD CUP *653 2.5575 1.6250 656 *

2.7500 1.6250 655 *2.8750 1.6250 657 *2.9375 1.6250 658 *3.0000 1.6250 659 *3.0000 1.6205 NA659 *3.0000 1.6295 NA659-SW *3.1250 1.6250 661 *3.1875 1.5000 662 *3.2500 1.6250 663 E-TM6633.2500 1.6250 663A *3.3125 1.6250 664 *3.3465 1.6250 665X *3.3750 1.6250 665 *3.3750 1.6250 665A *3.3750 1.6250 665AV *

5.75" OD CUP (cont'd.)47820 3.0625 1.3125 47880 *

3.6250 1.3125 47890 E-TM478903.6250 1.3125 47890XX *3.7500 1.3125 47896 *3.7500 1.3125 47896W *3.7500 1.3125 47896WC *3.7500 1.3125 47898 *

5.7864" OD CUP *HM218210 3.1486 1.5748 HM218238 *

3.5423 1.5748 HM218248 E-TMHM2182483.5423 1.5748 HM218248-Z *

5.8437" OD CUP *42584 3.4630 1.1250 42346 *

3.5000 1.1250 42350 E-TM423503.5433 1.1250 42354X *3.6250 1.1250 42362 *3.6875 1.1250 42368 *3.7392 1.1250 42373 *3.7500 1.1250 42375 *3.7500 1.1250 42375A *3.7500 1.1250 42375XX *3.7500 1.1250 42376 *3.8125 1.1250 42381 E-TM42381

5.875" OD CUP *6420 2.2500 2.1250 6455 *

2.2500 2.1250 6465 *2.5000 2.1250 6475 *2.5575 2.1250 6464 *2.7500 2.1250 6454 *2.7500 2.1250 6484 *2.7559 2.1250 6459 *2.8750 2.1250 6460 *3.0000 2.1250 6461 *3.0000 2.1250 6466 *3.0000 2.1250 6461A E-TM6461A3.0000 2.1250 6461CA *

5.9055" OD CUP *JH217210 3.3465 1.8110 JH217249 *5.909" OD CUP *742 2.3595 1.7500 745 *

2.3622 1.7500 746 *2.5000 1.7500 745-S *2.5575 1.7500 747-S *2.7500 1.7500 744A *2.7500 1.7500 745A *2.8750 1.7500 744 *3.0000 1.7500 748-S *





NO.ID

WIDTH NO. NO.



NO.ID

WIDTH NO. NO.



In Ascending Order

5.909" OD CUP (cont'd.) *742 3.1250 1.7500 750 *

3.1250 1.7500 750W *3.1496 1.7500 748 *3.1875 1.7500 740 E-TM7403.2500 1.7500 749A *3.2500 1.7500 750A *3.2500 1.7500 NA749 *3.3475 1.7500 749 E-TM7493.3475 1.7500 749-S E-TM749S3.3475 1.7500 749V *3.3475 1.7500 749W *

6" OD CUP *592 3.0000 1.5625 590A *

3.1250 1.5625 595A *3.1490 1.5625 590 *3.2500 1.5625 595 *3.3465 1.5625 599X *3.3750 1.5625 596 E-TM5963.4375 1.5625 596-S *3.5000 1.5625 593 E-TM593A3.5000 1.5625 593A *3.5000 1.5570 NA593 *3.5000 1.5570 NA593-SW *3.5000 1.7445 NA596-SW *3.5075 1.5625 593-S *3.5433 1.5625 597X *3.5965 1.5625 597A *3.6250 1.5625 598 E-TM5983.6250 1.5625 598A E-TM598A3.6250 1.5625 598W *3.6250 1.5625 598X *3.6875 1.5625 597 *3.6875 1.5625 596W *3.7402 1.5625 J594X *3.7500 1.5625 594 E-TM5943.7500 1.5625 594A E-TM594A3.7500 1.5625 594AA *3.7500 1.5625 594R *3.7500 1.5625 594-SW *3.7500 1.5625 594W *

592A 3.0000 1.5625 590A *3.1250 1.5625 595A *3.1490 1.5625 590 *3.2500 1.5625 595 *3.3465 1.5625 599X *3.3750 1.5625 596 E-TM5963.4375 1.5625 596-S *

6" OD CUP (cont'd.)592A 3.5000 1.5625 593 *

3.5000 1.5625 593A E-TM593A3.5000 1.5570 NA593 *3.5000 1.5570 NA593-SW *3.5000 1.7445 NA596-SW *3.5075 1.5625 593-S *3.5433 1.5625 597X *3.5965 1.5625 597A *3.6250 1.5625 598 E-TM5983.6250 1.5625 598A E-TM598A3.6250 1.5625 598W *3.6250 1.5625 598X *3.6875 1.5625 597 *3.6875 1.5625 596W *3.7402 1.5625 J594X *3.7500 1.5625 594 E-TM5943.7500 1.5625 594A E-TM594A3.7500 1.5625 594AA *3.7500 1.5625 594R *3.7500 1.5625 594-SW *3.7500 1.5625 594W *

652 2.5575 1.6250 656 *2.7500 1.6250 655 *2.8750 1.6250 657 *2.9375 1.6250 658 *3.0000 1.6250 659 *3.0000 1.6205 NA659 *3.0000 1.6195 NA659-SW *3.1250 1.6250 661 *3.1875 1.5000 662 *3.2500 1.6250 663 E-TM6633.2500 1.6250 663A *3.3125 1.6250 664 *3.3465 1.6250 665X *3.3750 1.6250 665 *3.3750 1.6250 665A *3.3750 1.6250 665AV *

HM518410 3.5000 1.5625 HM518445 E-TMHM5184456.1875" OD CUP *52618 3.7500 1.4375 52375 E-TM52375

3.7500 1.4325 NA52375 *3.8344 1.4315 NA52375T *3.8750 1.4375 52387 E-TM523873.8750 1.4375 52387W *3.9192 1.4315 NA52391T *3.9370 1.4375 52394X *3.9375 1.4375 52393 *





NO.ID

WIDTH NO. NO.



NO.ID

WIDTH NO. NO.



In Ascending Order

6.1875" OD CUP *52618 4.0000 1.4375 52400 E-TM52400

4.0000 1.4375 52401 *4.0000 1.4375 52402 *4.0000 1.4375 52400A *4.0000 1.4375 52400W *

6.375" OD CUP *752 2.8750 1.8750 762 *

2.8750 1.8750 762XA *3.0000 1.8750 755 *3.0000 1.8750 755W *3.1250 1.8750 756A *3.2500 1.8750 756 *3.2500 1.8750 757 *3.2500 1.8750 757W *3.3465 1.8900 762X *3.3750 1.8750 758 *3.3750 1.8750 758W *3.5000 1.8750 759 E-TM7593.5000 1.8750 766 *3.5000 1.8750 761W *3.5000 1.8675 NA759 *3.5000 1.8685 NA759-SW *3.5000 1.8685 NA761-SW *3.5433 1.8750 767X *3.5625 1.8750 760 *

6535 2.9985 2.1250 6574P *3.0000 2.4687 6554 *3.0000 2.1250 6575 *3.0000 2.1250 6576 *3.0000 2.1250 6576C *3.0000 2.1250 6576CP *3.0000 2.1250 6576V *3.2500 2.1250 6559C *3.2500 2.1250 6559CP *3.2500 2.1250 6559V *3.3750 2.4687 6553 *3.3750 2.4687 6550T *3.5000 2.4687 6552 *3.5000 2.1250 6580 E-TM65803.5000 2.4687 6552W *3.5000 2.1250 6580V *3.5433 2.1250 6581X *3.5433 2.1250 J6581X *

9220 2.3750 1.8750 9275 *2.6875 1.9375 9278 E-TM92783.0000 1.9375 9285 *3.0000 1.9375 9285XX *

6.375" OD CUP (cont'd.)52637 3.7500 1.4375 52375 E-TM52375

3.7500 1.4325 NA52375 *3.8344 1.4315 NA52375T *3.8750 1.4375 52387 E-TM523873.8750 1.4375 52387W *3.9192 1.4315 NA52391T *3.9370 1.4375 52394X *3.9375 1.4375 52393 *4.0000 1.4375 52400 E-TM524004.0000 1.4375 52401 *4.0000 1.4375 52402 *4.0000 1.4375 52400A *4.0000 1.4375 52400W *

6.4961" OD CUP *JM822010 4.3307 1.3780 JM822049 E-TMJM822049

4.3307 1.3780 JM822049H *6.625" OD CUP *672 3.3750 1.6250 677 *

3.5000 1.6250 679 *3.6250 1.6250 681 *3.6250 1.6250 681A *3.6250 1.6250 681W *3.7392 1.6250 682 *3.7392 1.5940 686 *3.7402 1.6250 683X *3.7500 1.6250 683 E-TM6833.7500 1.6250 683WA *3.7500 1.6250 683XA *3.8750 1.6250 685 *3.8750 1.6250 685W *4.0000 1.6250 687 E-TM6874.0000 1.6250 687P *4.0000 1.6195 NA691 *4.0000 1.6195 NA691-SW *4.0625 1.6250 689 *

7.125" OD CUP *772 3.5000 1.8750 775 *

3.6250 1.8750 778 *3.7500 1.8750 776 *3.7500 1.8750 777 *3.7500 1.8750 776W *3.7500 1.8685 NA776 *3.7500 1.8685 NA776-SW *3.8750 1.8750 779 *3.8750 1.8750 779W *3.9360 1.8750 783A *3.9370 1.8750 783 *





NO.ID

WIDTH NO. NO.



NO.ID

WIDTH NO. NO.



In Ascending Order

7.125" OD CUP (cont'd.)772 3.9370 1.8750 783W *

3.9690 1.8750 789 *4.0000 1.8750 780 *4.0000 1.8750 780W *4.0000 1.8750 780XX *4.0000 1.8685 NA780 *4.1250 1.8750 782 E-TM7824.1250 1.8750 786 *4.1250 1.8750 787 *4.1250 1.8750 782W *4.1250 1.8685 NA782 *

68712 4.5000 1.3750 68450 *4.5000 1.3750 68450A *4.6250 1.3750 68462 E-TM684624.6250 1.3750 68463 *

7.1875" OD CUP *48220 4.7500 1.5626 48282 *

4.8750 1.5626 48286 *5.0000 1.5626 48290 E-TM482905.0000 1.5626 48290W *5.0000 1.5626 48290XX *5.0000 1.7113 NA48290-SW *5.0000 1.5526 NA48291 *

7.75" OD CUP *67322 4.7500 1.8125 67384 *

4.9985 1.8045 NA67385T *5.0000 1.8125 67388 *5.0000 1.8125 67388W *5.0000 1.8125 M327345 *5.1250 1.8125 67389 *5.1654 1.8045 NA67389T *5.2500 1.8125 67390 E-TM673905.2500 1.8125 67391 E-TM673915.2500 1.8125 67390W *5.2500 1.8125 M327349 *

9.75" OD CUP *67720 6.5000 1.8750 67780 *

6.5000 1.8750 67780V *6.6250 1.8750 67782 *6.6250 1.8750 67782W *6.8750 1.8750 67786 *6.8750 1.8750 67787 *6.8750 1.8750 67787V *6.8750 1.8710 NA67787 *6.8750 1.8710 NA67787W *7.0000 1.8750 67790 *7.0000 1.8750 67790V *

9.75" OD CUP (cont'd.)67720 7.0000 1.8710 NA67790 *

7.0000 1.8710 NA67790W *7.0000 1.8750 67791 *7.0000 1.8740 NA67791-SW *


WHEEL BEARING LOCK-NUT WRENCHES

Using a caliper or other suitablemeasuring device, determine thesize of the Lock-Nut. Consult thechart at right to select the Lock-Nutwrench of corresponding size.

HOW TO DETERMINETHE WRENCH

SIZE YOU NEED......

EUCLIDNO.

OPENINGSIZE

EUCLIDNO.

OPENINGSIZE

E-1911E-1925E-1926E-1927E-1912E-1913E-844

E-1914E-1915E-3372E-1916E-1917E-6137E-1918E-1919E-3371

2 3/32" (6 pt.)2 1/4" (6 pt.)2 3/8" (6 pt.)2 3/8" (6 pt.)2 3/8" (8 pt.)2 1/2" (6 pt.)

2 9/16" (6 pt.)2 9/16" (8 pt.)2 9/16" (6 pt.)2 5/8" (6 pt.)2 3/4" (6 pt.)

3" (6 pt.)3" (8 pt.)

3 1/4" (6 pt.)3 1/4" (8 pt.)3 3/8" (8 pt.)3 1/2" (6 pt.)

3 1/2" (8 pt.)3 3/4" (8 pt.)3 3/4" (6 pt.)

3 13/16" (8 pt.)3 7/8" (6 pt.)3 7/8" (8 pt.)3 7/8"

and (8 pt.)3 3/8"

4" (6 pt.)4 1/8" (6 pt.)4 1/8" (8 pt.)4 3/8" (6 pt.)4 3/8" (8 pt.)4 1/2" (8 pt.)4 7/8" (6 pt.)4 7/8" (8 pt.)5 1/4" (6 pt.)

LISTED BY OPENING SIZE

Euclid wrenches have a 3/4" drivesquare opening for use with an extensionand torque wrench to tighten the Lock-Nutas required. A longer extension can beused for wide rims. Wrenches are madeof high strength and heavy-duty gaugesteel... Resists rounding out.

NEW STYLE EUCLID TUBULAR SPANNER WRENCHESWITH 3/4" DRIVE SQUARE OPENING

May be used with Torque Wrenchfor use on Chevrolet Truck Axles

EUCLID TUBULAR SPANNERWRENCHES USED WITH THISSTYLE NUT.

EUCLIDNO.

E-1929

E-1930

E-1931

1946 thru current Chevrolet5,200 & 7,200 lb. Axles

1954 thru current Chevrolet11,000 & 13,500 lb. Axles

1954 thru current Chevrolet15,000 lb. Axle1965 thru current Chevrolet15,000 lb. trailing Axle1966 thru current Chevrolet17,000 lb. 2-speed Axle

USED WITH NUTSIZE & PART NO.

APPLICATION

2"-16 THD.GM 3663657

2 1/8"-16 THD.GM 473636

2 1/2"-16 THD.GM 3703711

BACKVIEW

SIDEVIEW

*

* Fits special "rounded" hex nuts found on Dana axles ofsome Ford trucks.

MEASUREFROM

FLAT TO FLAT

Product Code 120

E-1901E-1920E-1902E-1936E-1903E-1921E-1904E-1905

* E-1928E-1922E-1923E-1906E-1907E-1908E-1909E-1924E-1910


E-6074

DIAL INDICATOR SET

Use to gauge looseness. Has a 2 1/4" diameterdial face graduated to .001 inch, a flexible armto get at hard-to-reach areas and an on/offmagnetic base.

E-9793

WHEEL BEARING ENDPLAY GAUGE

Quick and Accurate:• Remove magnet keepers and attach to face

of trailer hub withindicator contacting end of spindle

• Zero dial by rotating the dial face

• Rock the hub and drum to determinebearing endplay

• Adjust bearing endplay and recheck

UNIVERSAL BEARING CUP INSTALLER

Designed for installing wheel bearingcups of tractor and trailer wheels from11,000 to 50,000 lbs. capacity. Adjustsfrom 3 5/8" to 6 1/2" dia. bearing cup.

To use:1. Adjust and lock the jaws to the cup I.D.

2. Slip on new cup and put it in place inthe wheel.

3. Hit the tool's handle with a hammer.Bearing cup is now installed.

E-6040

SERVICE TOOLS

42 © 1999 Euclid Industries, ILLC

NUMERICAL LISTING OF EUCLID PART NUMBERSEUCLID NO. PAGE EUCLID NO. PAGE EUCLID NO. PAGE EUCLID NO. PAGE

E-844 42

E-1901 42

E-1902 42

E-1903 42

E-1904 42

E-1905 42

E-1906 42

E-1907 42

E-1908 42

E-1909 42

E-1910 42

E-1911 42

E-1912 42

E-1913 42

E-1914 42

E-1915 42

E-1916 42

E-1917 42

E-1918 42

E-1919 42

E-1920 42

E-1921 42

E-1922 42

E-1923 42

E-1924 42

E-1925 42

E-1926 42

E-1927 42

E-1928 42

E-1929 42

E-1930 42

E-1931 42

E-1936 42

E-3371 42

E-3372 42

E-382A 12

E-387A 12

E-6040 43

E-6074 43

E-6137 42

E-9793 43

E-25520 12

E-25580 12

E-47686 8

E-TM368A 15

E-TM382 15, 16, 17, 18

E-TM382A 15, 16

E-TM385A 29, 30

E-TM386A 29, 30

E-TM387 29, 30

E-TM387A 29, 30

E-TM387AS 29, 30

E-TM390 31, 32, 33

E-TM390A 31, 32, 33

E-TM392 32, 33

E-TM394A 16, 17, 19, 20

E-TM394CS 16, 17, 19, 20

E-TM395 31, 32, 33

E-TM395A 31, 32, 33

E-TM396 31, 32, 33

E-TM453X 17, 18

E-TM462 17

E-TM469 31

E-TM492A 21, 22

E-TM493 21, 22

E-TM495 36

E-TM495AX 35, 36

E-TM496 35, 36

E-TM497 35, 36

E-TM498 35, 36

E-TM522 11, 16, 18

E-TM528 11, 30

E-TM552 17, 18

E-TM552A 4, 5, 17, 18

E-TM555-S 4, 5, 34

E-TM557-S 34

E-TM563 11, 21

E-TM567 11, 34

E-TM572 6, 7, 8, 9, 10, 13, 22

E-TM580 6, 7, 8, 9, 10, 13, 37

E-TM582 37

E-TM592 22, 23

E-TM592A 6, 7, 8, 9,

10, 13, 22, 23

E-TM593A 38

E-TM594 38

E-TM594A 6, 7, 8, 9, 10,

13, 38

E-TM596 38

E-TM598 38

E-TM598A 10, 38

E-TM632 11, 19, 21

E-TM633 11, 19, 21

E-TM641 35, 36

E-TM643 11, 35, 36

E-TM652 22

E-TM653 11, 12, 13, 22

E-TM663 11, 13, 37, 38

E-TM665A 12

E-TM672 23, 24

E-TM681A 23

E-TM683 39

E-TM687 39

E-TM740 11, 38

E-TM742 10, 11, 21, 22

E-TM749 10, 11, 38

E-TM749S 11, 38

E-TM752 11, 23

E-TM759 11, 39

E-TM772 10, 24

E-TM782 10, 40

E-TM2720 27

E-TM3525 14

E-TM3585 28

E-TM3720 4, 5, 15, 16, 17

E-TM3732 15, 16, 17

E-TM3767 29, 30

E-TM3780 29, 30

E-TM3782 4, 5, 29, 30

E-TM3920 16, 17, 18, 19, 20

E-TM3925 18, 19, 20

E-TM3979 32

E-TM3982 32

E-TM3984 32

E-TM3992 32

E-TM3994 32

E-TM5735 21

E-TM5760 36

E-TM6320 19, 20

E-TM6379 36

E-TM6389 36

E-TM6420 4, 5, 21

E-TM6461A 4, 5, 37

E-TM6535 23

E-TM6580 39

E-TM9220 20

E-TM9278 39

E-TM14274 26

E-TM14276 27

E-TM15101 25

E-TM15243 14

E-TM15245 14

E-TM18720 28

E-TM25520 15

E-TM25523 15

E-TM25584 28

E-TM25590 28

E-TM25820 4, 14

E-TM25821 14

E-TM25877 4, 27

E-TM25880 27

E-TM26862 4

E-TM27620 22

E-TM27687 34

E-TM28622 4, 18

E-TM28682 4, 30

E-TM29620 20, 21

E-TM29630 20, 21

E-TM29675 32, 33

E-TM29685 32, 33

E-TM31520 14

E-TM31597 27

E-TM33275 33

E-TM33281 33

E-TM33287 33

E-TM33462 20, 21

E-TM33472 20, 21

E-TM39520 6, 7, 8, 9, 10,

18, 19, 20

E-TM39580 32

E-TM39581 32

E-TM39585 32

E-TM39590 6, 7, 8, 9, 10, 32

E-TM42350 37

E-TM42381 37

E-TM42584 23, 24

E-TM42620 21

E-TM42687 35

E-TM42688 35

E-TM44143 28

E-TM44348 14

E-TM45220 15, 16, 18

E-TM45280 30

E-TM45284 30

E-TM45291 30

E-TM47420 21

E-TM47490 33

E-TM47620 6, 7, 8, 9, 10,

21, 22

E-TM47679 35

E-TM47686 6, 7, 9, 10, 35

E-TM47820 23

E-TM47890 37

E-TM48220 24

E-TM48290 40

E-TM49520 16

E-TM49585 30

E-TM52375 38, 39

E-TM52387 38, 39

E-TM52400 39

E-TM52618 23, 24

E-TM52637 23, 24

E-TM55176 31, 32

E-TM55200C 31, 33

E-TM55206C 31, 33

E-TM55437 16, 17

E-TM55443 16, 17

E-TM59412 30

E-TM64450 24

E-TM64700 24

E-TM65225 35

E-TM65237 35

E-TM65500 18

E-TM66225 33

E-TM66462 18

E-TM67322 24

E-TM67390 40

E-TM67391 40

E-TM67720 40

E-TM68462 24, 40

E-TM68712 24

E-TM72188C 34

E-TM72200C 34

E-TM72212C 34

E-TM72218C 34

E-TM72225C 34

E-TM72487 16, 17, 18

E-TM78215C 37

43© 1999 Euclid Industries, LLC

EUCLID NO. PAGE EUCLID NO. PAGE EUCLID NO. PAGE EUCLID NO. PAGE

NUMERICAL LISTING OF EUCLID PART NUMBERSE-TM78250AC 37

E-TM78551 17, 19

E-TM212049 4

E-TMH414210 21

E-TMH414249 36

E-TMH715311 4, 19, 20, 21

E-TMH715334 36

E-TMH715341 36

E-TMH715343 36

E-TMH715345 4, 36

E-TMHH506310 13, 16

E-TMHH506348 13, 33

E-TMHM88610 14

E-TMHM88649 27

E-TMHM89410 14

E-TMHM89449 27

E-TMHM212011 4, 5, 11, 12,

13, 18, 19, 20

E-TMHM212044 34

E-TMHM212046 34

E-TMHM212047 5, 34

E-TMHM212049 4, 5, 11,

12, 13, 34

E-TMHM212049X 4, 34

E-TMHM218210 11, 12, 13, 23

E-TMHM218248 11, 12, 13, 37

E-TMHM516410 22

E-TMHM516449C 35

E-TMHM518410 13, 23

E-TMHM518445 13, 38

E-TMHM801310 14

E-TMHM801346X 27

E-TMHM803110 14, 15

E-TMHM803146 28

E-TMHM803149 28

E-TMHM804810 15, 16

E-TMHM804840 29

E-TMHM804846 29

E-TMHM807010 15, 16, 17

E-TMHM807040 31

E-TMHM807044 31

E-TMHM807046 31

E-TMHM807049 31

E-TMHM813810 19, 20

E-TMHM813843 35

E-TMHM813844 35

E-TMHM903210 15

E-TMHM903244 29

E-TMHM903249 29

E-TMHM903249A 29

E-TMHM911210 17, 18

E-TMHM911242 35

E-TMHM911245 35

E-TMJH211710 19

E-TMJH211749 33

E-TMJH217210 37

E-TMJHM720210 24

E-TMJHM720249 24

E-TMJL69310 14

E-TMJL69349 26

E-TMJLM104910 16

E-TMJLM104948 27, 28

E-TMJLM506810 17

E-TMJLM506849 29

E-TMJLM710910 19

E-TMJLM710949C 31

E-TMJLM714110 21

E-TMJLM714149 33

E-TMJM207010 4, 17

E-TMJM207049 29

E-TMJM207049A 4, 29

E-TMJM511910 19

E-TMJM511945 31, 32

E-TMJM511946 31, 32

E-TMJM515610 21

E-TMJM515649 35

E-TMJM612910 21

E-TMJM612949 33

E-TMJM716610 22

E-TMJM716649 35

E-TMJM822010 24

E-TMJM822049 39

E-TML44610 14

E-TML44643 25

E-TML44649 25

E-TML68111 14

E-TML68149 25

E-TMLM11910 14

E-TMLM11949 25

E-TMLM12710 14

E-TMLM12749 25

E-TMLM48510 14

E-TMLM48548 14

E-TMLM67010 14

E-TMLM67048 25

E-TMLM102910 15

E-TMLM102949 27

E-TMLM104911 16, 17

E-TMLM104949 27, 28

E-TMLM501310 15

E-TMLM501314 15

E-TMLM501349 27

E-TMLM603011 15

E-TMLM603049 27

E-TMM86610 16

E-TMM86649 26

E-TMM88010 14

E-TMM88048 26

E-TMM802011 15

E-TMM802048 28

E-TMM804010 16

E-TMM804049 29

E-TMSET401 6, 7, 8, 9, 10, 13

E-TMSET403 6, 7, 8, 9, 10, 13

E-TMSET404 10

E-TMSET405 11, 13

E-TMSET406 4, 5

E-TMSET407 4

E-TMSET408 6, 7, 8, 9, 10

E-TMSET411 6, 7, 8, 9, 10

E-TMSET412 5

E-TMSET413 4, 5, 11, 12, 13

E-TMSET414 11, 12, 13

E-TMSET415 13

SERVING THE HEAVY-DUTYINDUSTRY SINCE 1939Euclid Industries, LLC6660 Beta DriveCleveland, Ohio 44143-2321(440) 461-4300 • Fax: (440) 461-4307www.euclidind.com

Euclid Industries Canada Ltd.Toronto • Edmonton • Montreal • Vancouver

Copyright 1998 Euclid Industries, Inc.UD-69 • 5-99 • Printed in USA

Distributed By:

EUCLID INDUSTRIESThe building of

the most trusted namein truck parts allstarted with one man'suncompromising ideals.

In 1939, ZygmuntZukowski foundedEuclid Industries,manufacturing partsfor Alcoa, Mack, White,Fruehauf, Eaton andother OEMs. The historyof trust that began backthen was based on anobsession for everyengineering detail.

Over the years,the building of trustcontinued with a relent-less drive for perfectionat every stage. Inmanufacturing. Incatalogs.In filling customerorders. In expert service,support and caring forthe customer.

Earning trust everyday means more qualitycontrol, inspections,more sensitivity to theneeds of customers.

And that's whyEuclid has grown tobecome the premiertruck aftermarketchassis parts manufac-turer in the UnitedStates and Canada.

Today, EuclidIndustries providesthe world withprecision-engineeredlight, medium andheavy-duty truck, trailer,and bus replacementparts that meet andoften exceed OEMquality specificationstandards.

So when ware-house distributors andfleet owners see thefamiliar yellow boxfrom Euclid Industries,they know they're gettingfar more than ordinaryreplacement parts.

They're getting thebest replacement partsmade today from acompany they can trust.A company that'sconstantly improvingwith technology todo a job the only way itknows how.

The Right Way.

Building TrustNever Stops.

It's a philosophythat will continue toguide us for the yearsahead.

Worldwide we'recommitted more thanever to maintaining atight control over qualityin engineering,manufacturing, sales,personalized service,customer support andproduct training. Wewill continue to makeimprovements and addadvanced systems.

We're doingeverything humanly andtechnologically possibleto provide our customerswith the best truckparts, when and wherethey're needed.

Documents

Rodamientos Timken