ROD BUCKETS Rod Buckets available with or without felt back.
Felt back version has a stainless steel pin for use with gimbals
but can be removed if not needed.
EZ KEEPER II The EZ Keeper is an option hook keeper that can be
added to your rod to keep lures and hooks out of the way. The
beauty of the EZ Keeper is that depending on whether you are right
handed or left handed you can place it on the side of your rod that
is most convenient keeping it out of the way while fishing. The EZ
Keeper II comes with two in a pack with four UV resistent O
rings.
MEGASTRIKE When it comes to enhancing your lures there’s only one
additive or scent to use, Mega Strike. Scientifically formulated
and designed to be the perfect balance of amino acids and proteins,
fish respond to it like no other. Formulated to work in conjunction
with a fish’s chemo receptors and olfactory glands, fish will
respond by, striking at the attractant, holding onto it, and
consuming it. A long-last gel consistency, advanced molecular
structure, and no mess tube further enhance Mega Strike’s long list
ofattributes, making it the must-have attractant for all serious
lure anglers.
BURLEY DROPPER Features cantilever locking / release system which
releases bailt upon contact with the bottom or vigorous shakingat
any depth.
Black
EZ SLIDE The EZ Slide is a hook keeper that can be added to and 1.5
piece rod to keep lures and hooks out of the way. It is a slim
design so doesn’t protrude off the blank and can set up for right
handed or left handed users. The EZ Slide comes with two in a pack
with four UV resistant O rings.
Silver Red
3
Weight Code Colours Available 15 grams BE15
Black Chrome (BLC), Blue Chrome (BUC), Green Chrome (GC), Glow
White (GW), Pink Chrome (PC) and Red Head (RH)
25 grams BE25
40 grams BE40
50 grams BE50
75 grams BE75
100 grams BE100
ROUND JIG HEAD MOULDS To Order: Item number E.G DO1019
OTHER JIG HEAD MOULDS To Order: Item number E.G DO3454
This section of Do-it Molds listed here represent models well
suited to Australian fishing conditions. Do-it Molds has an
exstensive range available which can be orded in. Please contact us
regarding products not listed in this catalogue.
Item Number: 1020 Hook: Gamakatsu Jig 90RB Cavaties: 8 Sizes (oz)
& Matching Hook Size: 1/32 (oz) size 6. 1/16 (oz) size 4.
Item Number: 3115 Style: Darter Hook: Gamakatsu Jig 90RB Cavaties:
5 Sizes (oz) & Matching Hook Size: 1/4 (oz) size 1/0. 3/8 (oz)
size 2/0. 1/2 (oz) size 3/0. 3/4 (oz) size 4/0. 1 (oz) size
5/0.
Item Number: 1021 Hook: Gamakatsu Jig 90RB Cavaties: 8 Sizes (oz)
& Matching Hook Size: 1/8 (oz) size 2, 1 or 1/0. 1/4 (oz) size
1, 1/0 or 2/0.
Item Number: 3236 Style: Darter Hook: Gamakatsu Jig 90RB Cavaties:
4 (2 each size) Sizes (oz) & Matching Hook Size: 1/2 (oz) size
4/0. 3/4 (oz) size 4/0.
Item Number: 1022 Hook: Gamakatsu Jig 90RB Cavaties: 6 Sizes (oz)
& Matching Hook Size: 3/8 (oz) size 2/0 or 3/0. 1/2 (oz) size
2/0 or 3/0.
Item Number: 3328 Style: Darter Hook: O’Shaughnessy Cavaties: 3
Sizes (oz) & Matching Hook Size: 1 (oz) size 5/0. 1 1/2 (oz)
size 6/0. 2 (oz) size 7/0.
Item Number: 3102 Hook: Gamakatsu Jig 90RB Cavaties: 8 Sizes (oz)
& Matching Hook Size: 1/16 (oz) size 4 or 2.
Item Number: 3361 Style: Darter Hook: Gamakatsu Jig 90RB Cavaties:
8 (2 each size) Sizes (oz) & Matching Hook Size: 1/32 (oz) size
6. 1/8 (oz) size 1
Item Number: 3103 Hook: Gamakatsu Jig 90RB Cavaties: 8 Sizes (oz)
& Matching Hook Size: 1/8 (oz) size 1 or 10.
Item Number: 3116 Hook: Gamakatsu Jig 90RB Cavaties: 8 Sizes (oz)
& Matching Hook Size: 3/32 (oz) size 4 or 2.
Item Number: 3388 Hook: Gamakatsu Jig 90RB Cavaties: 7 Sizes (oz)
& Matching Hook Size: 1/32 (oz) size 2. 1/16 (oz) size 1. 1/8
(oz) size 1/0. 1/4 (oz) size 2/0. 3/8 (oz) size 2/0. 1/2 (oz) size
5/0. 5/8 (oz) size 6/0.
Item Number: 3454 Style Weighted EWG Hook: Gamakatsu WXH Cavaties:
4 Sizes (oz) & Matching Hook Size: 1/16 (oz) size 2/0 - 5/0.
1/8 (oz) size 2/0 - 6/0. 3/16 (oz) size 2/0 - 6/0. 1/4 (oz) size
4/0 - 6/0.
5
SNAPPER SINKER MOULDS To Order: Item number E.G DO1103
This section of Do-it Molds listed here represent models well
suited to Australian fishing conditions. Do-it Molds has an
exstensive range available which can be orded in. Please contact us
regarding products not listed in this catalogue.
Item Number: 1101 Model group: Asorted Cavaties: 8 Sizes (oz) :
1/8, 1/4, 3/8, 1/2, 3/4, 7/8, 1, 1-1/2.
Item Number: 1106 Model group: Actually Cavaties: 4 Sizes (oz) :
2.
Item Number: 1103 Model group: Combination Cavaties: 2 Sizes (oz) :
6 & 8.
Item Number: 1108 Model group: Write Cavaties: 3 Sizes (oz) :
4.
Item Number: 1167 Model group: Production Cavaties: 1 Sizes (oz) :
16.
Item Number: 1109 Model group: Production Cavaties: 3 Sizes (oz) :
5.
Item Number: 3481 Model group: Combo Cavaties: 2 Sizes (oz) : 7
& 9.
Item Number: 1166 Model group: Production Cavaties: 1 Sizes (oz) :
12.
Item Number: 1102 Model group: Combo Cavaties: 4 Sizes (oz) :
2,3,4,5
SWIVEL BELL SINKER MOULDS To Order: Item number E.G DO1110
Item Number: 1112 Model group: Combination Cavaties: 9 Sizes (oz) :
3/8 & 5/8.
Item Number: 1110 Model group: Assorted Cavaties: 8 Sizes (oz) :
1/8, 1/4, 3/8, 1/2, 5/8, 1, 1-12, 2
Item Number: 1113 Model group: Combination Cavaties: 8 Sizes (oz) :
1, 1 1/2.
Item Number: 3260 Model group: Combination Cavaties: 2 Sizes (oz) :
6 & 8.
Item Number: 3257 Model group: Production Cavaties: 9 Sizes (oz) :
3/4.
Item Number: 3262 Model group: Combination Cavaties: 2 Sizes (oz) :
14 & 16.
Item Number: 3263 Model group: Production Cavaties: 1 Sizes (oz) :
20.
Item Number: 3259 Model group: Combination Cavaties: 3 Sizes (oz) :
3, 4 & 5..
Item Number: 3261 Model group: Combination Cavaties: 2 Sizes (oz) :
10 & 12.
6
ACCESSORIES
Part: Pot Item Number: 1904 Description: Large 20lb. lead capacity.
This 5” diametre cast iron lead melting pot holds twice as much
metal as the average bullet pot. Recommended for all round
use.
Part: Production Pot Item Number: 1896 Description: Designed to
work in conjunction with our Large Ladle, this large lead melting
pot will hold 50 lbs. of lead. 8” diameter, 4” depth. Wire handle,
pouring lip, and tipping handle. Cast iron construction.
Part: Cast Iron Ladle Item Number: 1905 Description: The 1905 ladle
had a 3” diametre cup to hold up to 1-1/2 lbs. of lead and is
designed to pour large cavity molds. Left and right pouring lips
and are intended for use with the 1904 cast iron pot.
Part: Cast Iron Ladle Item Number: 1911 Description: The 1911 has a
2-1/2” diametre cup to hold up to 1 -1/4 lbs. of lead. The 1911 has
a shorter handle design for better agility and ease of pouring.
Left and right pouring lips and are intended for use with the 1904
cast iron pot.
Part: Pro Melter Item Number: 1895 Description: An affordable large
capacity melter that holds 20 pounds of lead in a 4” x 4” I.D.
carbon steel pot. Features four inches of clearance beneath the
spout, a new micro adjustable flow control valve, and an adjustable
mold guide.
Part: Spinnerbait Kit Item Number: 2704 Description: If you want to
experience the thrill of making your own spinner baits, But don’t
want to get into pouring, then this is the kit for you. Included
are 16 assorted colour skirts, 10 ready to paint Ultra Spinner bait
heads, 24 stick on eyes, 12 Willow Leaf Blades, 12 Colorado blades,
12 snap swivels and clevises, 48 beads, 6 brushes, a step by step
instructional DVD and one reusable tackle organizer.
7
VIBRATION BLADE MOULDS AND BLANKS Item Number: 3277 Sizes: 1/4 and
3/8 Blanks needed: ZB-S BLANKS Description: The wide flat head
together with metal blade provides erratic action when the lure is
jerked sharply or allowed to drop in free fall.
Item Number: 3278 Sizes: 1/2 and 3/4 Blanks needed: ZB-M BLANKS
Description: The wide flat head together with metal blade provides
erratic action when the lure is jerked sharply or allowed to drop
in free fall.
Item Number: 3332 Sizes: 1/4 and 1/2 Blanks needed: BOTH BLANKS
Description: Think of it as the lure knows “fish speak”. Fish,
especially hard to reach schooling fish, respond to vibrations for
their next meal.. Versitile enough to be used for jigging, casting
and trolling. Style ZV Vibrating Lures Shimmy through the water -
sending out a “dinners ready” call to a wide variety of
species.
Item Number: 2361 Blanks needed: ZB-S Brass Blanks Description:
Think of it as the lure knows “fish speak”. Fish, especially hard
to reach schooling fish, respond to vibrations for their next
meal.. Versitile enough to be used for jigging, casting and
trolling. Style ZV Vibrating Lures Shimmy through the water -
sending out a “dinners ready” call to a wide variety of
species.
Item Number: 1998 Blanks needed: ZB-S Brass Blanks Description:
Blade blanks designed for Shad Blade and Vibrating lures with all
the necessary holes punched. Brass finish blanks can be painted.
Nickel-plated blanks need only lead molded on and hooks attached.
Use the ZB-M blanks for 1/2, 5/8 and 3/4 size lures. Use ZB-S for
1/4 and 3/8 size lures.
8
ACCESSORIES
PROFLAKE POWDER GLITTER Pro-Flake Glitter Coat is premixed in Clear
Powder Paint and ready for application. No mixing, no measuring.
Enhances any lure with sparkling glitter and ultra deep gloss.
Pro-Flake can be applied immediatley after the colour coat within
the same heating cycle, or can be applied later by reheating lure
with an indirect heat source such as an oven or a hot air
gun.
PROTEC POWDER PAINTPowder paint is a durable finish with a unique
application process intended for ig heads and metal lures that can
be dip painted and then withstand heat. No primer; no base coat;
one coat completely covers! The jighead is painted and dry in just
a moment.
Color Item No.
01 White 2721
15 Watermelon 2738
NS “Glow” Overcoat* 2736
51 Chartreuse Glitter 2764
52 Gold Glitter 2765
53 Green Glitter 2767
55 Red Glitter 2772
56 Black Glitter 2773
57 Fuchsia Glitter 2776
PROTEC SUPERGLOW POWDER PAINT Pro-Tec Super Glow Powder Paint is
one of the most popular lure finishes to emerge in recent years,
offering the durability of powder paint with a phosphorescent
finish that glows longer and brighter than standard glow. And they
glow their true color, attracting fish even in dark
conditions.
*“Glow” Overcoat is a highly charged semi-clear powder that can be
applied over any of the standard or fluorescent powder paint colors
while the lure is still hot. The jig will appear as the base color
in the light, but the overcoat will “glow” a greenish white in
darkness.
01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17
56 57
FLUID BED The FB3 suspends the powder on a column of slow moving
air. The result is a beautifully thin, uniform coat of powder with
every dip. A thinner coat means less wasted paint and, in most
cases, will leave hook eyes unplugged.
Item No.
9
ACCESSORIES VINYL PAINT CS Coatings’ Vinyl Lure and Jig Paint has
been “The toughest Finish Ever Put On A Lure” for 30 years. Our
Vinyl Paints incredible flexibility makes it able to withstand
anything you can throw at it! Quick drying time coupled with
excellent adhesion to most metals, woods and hard plastics make our
Vinyl Paint the favourite of some 1,500 tackle manufacturers
worldwide. Far more durable than lacquer and enamel paints and
easier to use than epoxy paints, VINYL FINISH remains flexible and
will not chip or flake when applied over clean lead. Go ahead, use
your lures in rocks – the lead will dent but VINYL FINISH will not
chip off. Dip or spray two coats of white as a base for other
colors to get a professional finish. Most colors will dry flat —
not glossy. For a gloss finish add a coat of CLEAR GLOSS.
WATER BASED PAINT CS Coatings’ Water Base Paint is one of the most
durable liquid finishes on the market today. Being water based the
paint has a low odor, it is user - friendly and environmentally
safe. Because of its unique durability, it will withstand the daily
rigors of packaging, tackle boxes and serving as lunch for trophy
fish. This is a excelent finish for learning to use air brushes
also with easy cleanup.
Colour Vinyl Paints
Water Based Paints
07 White Pearl 2031
09 Hot Yellow 212W
00 01 02 03
16 17 18 19
04 05 06 07
12 13 14 15
08 09 10 11
VINYL & WATER BASED PAINT COLOURS Code: DOCODE e.g. Water Based
Red - DO214W
10
ACCESSORIES
QUICK COAT PAINT MARKERS Quick Coat Paint Markers are the answer to
complete customization of lures. With chisel, round and fine point
tips included they are ideal for drawing eyes, gill plates, dorsal
lines and scales. Compact, mess free, and perfect for stowing in
your tackle box this is a pen that you want in your pocket on your
next fishing adventure. Available in an assortment of eye and fish
catching colours. CAUTION: FLAMMABLE - Contains petroleum
distillates, keep from heat and open flame. Use under
well-ventilated conditions. Keep out of reach of children.
Code: DOCODE e.g. UV Blast Clear - DO2939
Color Item No.
Super Glow Chartreuse 2947
Super Glow Green 2948
Super Glow Red 2949
UV Blast Clear 2939
PAINT BRUSH Every good tradesman needs the right tool for the job
to get the best job done, and when it comes to getting the best
fin- ish for your new lure paint scheme, there’s only one choice
when it comes to brushes, the Atomic Paint Brush. Available in a
five brush set, and designed to deliver the best finish possible
these specialist brushes are suitable for all CSI paints, and are
the only choice for budding lure artist and wanna be Trick Bitz
Picassos. Code: TBBRUSH
CSI SEALER Imagine a clear coat that has all the best qualities of
epoxy: extreme durability, deep gloss, non yellowing, fast drying
and worm proof. Now imagine having none of the head aches: no
mixing, no measuring, no pot life and low odour. Seal - Coat Lure
and Jig finish offers all of this in water base one - step clear
coat. Use only what you want, when you want, leaving you with more
time to fish and less to fuss. Available in both UV and standard
Clear.
UV DO2964
Clear DO2718
ACCESSORIES UV BLAST PRODUCTS
UV Blast! is a clear overcoat that can be applied to any lure to
reflect critical UV light. Your lure will flash even in dark, murky
water where UV light, but not visible light, penetrates. Research
continues to show that fish see and are attracted to UV light. With
UV Blast!, you get the strongest UV enhancer available today in a
variety of odor- free clear coats.
UV BLAST MARKERS These clear coat markers with UV Blast added give
you total control over where you apply the UV Blast. With chisel,
round and fine point tips included you now have the power to add UV
Blast and its ability to reflect critical UV light exactly where
you want it. Talk about customization. Code: DO2939
SEAL-COAT LURE & JIG FINISH The TOUGHEST Topcoat ever put on a
lure now with the added benefit of UV Blast!. This one-step system
is as strong as epoxy without the measuring, mixing and smell. This
finish has an extreme durability, a deep gloss, is non-yellowing,
fast-drying and worm proof. Code: DO2964
CLEAR PRO-TEC POWDER PAINT UV Blast! is a special formulation that
has the effect of “lighting up” lures and jigs. Fish find baits
faster that reflect UV light. This clear, super-durable, high-gloss
formula can brighten fluorescent lures. Code: DO2966
LURE DIP NEUTRALIZER Removes Quick-Coat paints from lure surfaces.
Code: DO2935
UV CLEAR LURE SPRAY Just spray on and fire your lures up! This easy
to carry 4 oz. bottle can be applied to any lure. Spray on and let
dry for 30 seconds. Code: DO2963
UV WORM DIP Instantly changes the color of soft plastics bait to
give you near limitless possibilities. Quick-Coat Worm Dip has a
penetrating finish that dries in seconds. Colors can even be mixed
to make your own custom colors with UV enhancer. 4 oz.
bottle.
Color Item No.
Clear 2967
UV LURE DIP Don’t miss “The Big One” because you don’t have the
right colored lure or hook in your tackle box. Quickly changes the
color of hooks, blades, spoons, lures and more. Mix to create your
own colors. Dries in seconds. 4 oz. bottle.
Color Item No.