32

ROCKWELL Transformers

Embed Size (px)

Citation preview

Page 1: ROCKWELL Transformers
Page 2: ROCKWELL Transformers
Page 3: ROCKWELL Transformers
Page 4: ROCKWELL Transformers
Page 5: ROCKWELL Transformers
Page 6: ROCKWELL Transformers
Page 7: ROCKWELL Transformers
Page 8: ROCKWELL Transformers
Page 9: ROCKWELL Transformers

115

121

69

H

P.05

Page 10: ROCKWELL Transformers

115

121

L

B

P.06

Page 11: ROCKWELL Transformers

P.07

Page 12: ROCKWELL Transformers

P.08

Page 13: ROCKWELL Transformers

P.09

Page 14: ROCKWELL Transformers

P.10

C

c0 a b

BA

Page 15: ROCKWELL Transformers

P.11

A B C

Page 16: ROCKWELL Transformers

P.12

Page 17: ROCKWELL Transformers

P.13

Page 18: ROCKWELL Transformers

P.14

Page 19: ROCKWELL Transformers

P.15

Page 20: ROCKWELL Transformers

P.16

Conventional Type:

The transformer is cylinder sealing structure. Each one is fixed with grounding devices, hooks, supporting

lugs which conform to ANSI Standard, and one or two high voltage bushing on the cover, low voltage bushing on

the wall of the tank and eyebolt connecting teminals, High voltage taps should be connected when the power is

cut off.

Complete Self-Protected Type:

This transformer is csp type, which can protect itself from thunder and lightning, short circuit and protect the

transiting and distribution line from current failure because of self-malfunction.

Except from some similarities such as; cylinder tank, hooks, lifting lugs, grounding devices, nameplates, core

and winding with the conventional type, this type of transformer has characteristics and devices as follows; One

of two high voltage bushings in which there ls fuse;

One or two arresters, on the wall of the tank, whose top end is near to the high voltage bushing,and connected

to the bushing by a copper strip;

One secondary breader switch above the winding inside the tank, and here are operating handle. overload

reset and signal light Low voltage bushing educed from the wall of the tank, grounding device is fixed to position

X2.

Core: C.R.G.O core and amorphous metal core can be chosen.

35 , 20kV, 10kV Single Phase Pole Mounted Distribution TransformerkV

Page 21: ROCKWELL Transformers

P.17

S(B)H15-M-30

S(B)H15-M-50

S(B)H15-M-80

S(B)H15-M-100

S(B)H15-M-125

S(B)H15-M-160

S(B)H15-M-200

S(B)H15-M-250

S(B)H15-M-315

S(B)H15-M-400

S(B)H15-M-500

S(B)H15-M-630

S(B)H15-M-800

S(B)H15-M-1000

S(B)H15-M-1250

S(B)H15-M-1600

S(B)H15-M-2000

S(B)H15-M-2500

11kV Amorphous Alloy Core Distribution Transformer

Page 22: ROCKWELL Transformers

P.18

Above mentioned parameter are only for reference, ROCKWELL is able to design products according to specific requirements from end users.

Above mentioned parameter are only for reference, ROCKWELL is able to design products according to specific requirements from end users.

Page 23: ROCKWELL Transformers

·35kV Single-phase

·35kV Three-phase

P.19

Page 24: ROCKWELL Transformers

P.20

Above mentioned parameter are only for reference, ROCKWELL is able to design products according to specific requirements from end users.

Above mentioned parameter are only for reference, ROCKWELL is able to design products according to specific requirements from end users.

Page 25: ROCKWELL Transformers

P.21

Page 26: ROCKWELL Transformers

P.22

A B C

Page 27: ROCKWELL Transformers

P.23

A B C

Page 28: ROCKWELL Transformers

P.24

HV/LV Prefabricated Transformer Substation

Page 29: ROCKWELL Transformers

P.25

Page 30: ROCKWELL Transformers

P.26

Compact Pad-mounded Transformer Substation

Page 31: ROCKWELL Transformers

P.27

Page 32: ROCKWELL Transformers