Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
1
NeoStencil – Live Online Classes - IAS/IES/GATE/SSC/PSC | +91 95990 75552 | [email protected]
Rocks and types of Rock
Rocks are the most common material on the Earth; they ordinarily lie everywhere
on the ground. They constitute most of the landforms, and there is a close
relation between rocks and landforms. The earth’s crust is composed of rocks. A
rock is an aggregate of one or more minerals that have been fused together into a
solid lump. For example, granite, a common rock, is a combination of the minerals
quartz, feldspar and biotite.
Properties of rocks
The rocks may be made up entirely of one mineral or various minerals.
Rocks do not have a definite composition of mineral constituents. Feldspar and
quartz are the most common minerals found in rocks.
2
NeoStencil – Live Online Classes - IAS/IES/GATE/SSC/PSC | +91 95990 75552 | [email protected]
Rock may be hard or soft. For example, granite is hard, soapstone is soft.
Rocks may have varied colours. Some rocks are dark and some are light
coloured. For example, Gabbro is black and quartzite can be milky white.
Types of rocks
Rocks are classified according to characteristics such as mineral and chemical
composition, permeability, the texture of the constituent particles, and particle
size. In the long run, all types of rocks can transform from one type into another,
as described by the rock cycle model. These transformations usually take
thousands or millions of years.
There are many different kinds of rocks which are grouped into three families by
their mode of formation. They are:
1. Igneous Rocks
2. Sedimentary Rocks
3. Metamorphic Rocks
Igneous Rocks
Igneous rocks are called as primary rocks as they are formed out of magma and
lava from the interior of the earth.
The igneous rocks (Ignis – in Latin means ‘Fire’) are formed when magma cools
and solidifies.
Igneous rocks are classified based on texture. The texture of these rocks
depends upon arrangement and size of grains and other physical properties or
condition of the materials.
Most igneous rocks are extremely hard and resistant. For this reason, they are
quarried for road construction and polished as monuments and gravestones.
Igneous rocks do not contain fossils as their forming material are super hot
magmatic materials.
3
NeoStencil – Live Online Classes - IAS/IES/GATE/SSC/PSC | +91 95990 75552 | [email protected]
Granite, gabbro, pegmatite, basalt, volcanic breccia and tuff are some of the
examples of igneous rocks.
Formation of Igneous rocks
During the volcanic eruptions, the molten rock materials – Magma and Lava,
find their way to the surface.
When magma in its upward movement cools and turns into a solid form, it is
called igneous rock.
This process of solidification can happen on the surface of the earth or inside
the earth’s crust.
The rate of cooling of the magma determines the size of its grain structure.
Magma cooled on the surface are fined grained whereas magma cooled slowly
inside the earth surface have coarse grain structure.
Formation of Igneous rocks
Classification of Igneous rocks
The lava that is released during volcanic eruptions on cooling develops into
igneous rocks. The cooling may take place either on reaching the surface or also
4
NeoStencil – Live Online Classes - IAS/IES/GATE/SSC/PSC | +91 95990 75552 | [email protected]
while the lava is still in the crustal portion. Depending on the location of the
cooling of the lava, igneous rocks are classified into two types:
1. Volcanic rocks (Extrusive rocks) – cooling at the surface – extrusive rocks are
formed when molten magma, erupted from volcano, cools on the surface. The
magma on the surface (lava) cools faster on the surface to form igneous rocks
that are fine grained. Pumice and basalt are examples of extrusive igneous
rocks.
2. Plutonic rocks (Intrusive rocks) – cooling in the crust – Intrusive igneous rocks
are formed when the magma cools off slowly under the earth’s crust and
hardens into rocks. Intrusive rocks are very hard in nature and are often coarse-
grained. Gabbro and granite are examples of intrusive igneous rocks.
Sedimentary Rocks
The word ‘sedimentary’ is derived from the Latin word sedimentum, which
means settling.
Sedimentary rocks are those that are formed through deposition and
lithification (compaction and cementation) of sediment particles at the Earth’s
surface, with the assistance of running water, wind, ice, or living organisms.
They may be coarse or fine-grained, soft or hard.
Sediments are naturally occurring particles derived from weathering and
erosion of pre-existing rocks.
The particles that form sedimentary rocks may be brought by winds, streams,
glaciers and even animals.
They are non-crystalline and often contain fossils of animals, plants and other
micro-organisms.
Sedimentary rocks are distinguished from other rock types in their characteristic
layer formation and are termed stratified rocks. The strata may vary in
thickness.
5
NeoStencil – Live Online Classes - IAS/IES/GATE/SSC/PSC | +91 95990 75552 | [email protected]
Layers may be distinguished by differences in colour, particle size, type of
cement, or internal arrangement.
Classification of sedimentary rocks is done according to their age and different
kinds of rocks formed during the same period are grouped together.
Most of the solid surface of our planet (roughly 70%) is represented by
sedimentary rocks.
Sandstone, Limestone and Shale are some examples of sedimentary rocks.
Weathering, Erosion and Deposition (W.E.D.)
6
NeoStencil – Live Online Classes - IAS/IES/GATE/SSC/PSC | +91 95990 75552 | [email protected]
Formation of sedimentary rocks
Sedimentary rocks are formed from sediments accumulated over long periods,
usually under water.
All types of rocks (igneous, sedimentary and metamorphic) of the earth’s
surface are exposed to denudational agents (water, winds, ice and glacier etc.)
and are broken up into various sizes of fragments.
Such fragments are transported by different exogenous agents and deposited or
settled down in low lying areas or underwater, through the process of
sedimentation.
These deposits finally turn into rocks through compaction and compression by
weight of overlying material. This process is called lithification.
In many sedimentary rocks, the layers of deposits retain their characteristics
even after lithification. That is why we can see a number of layers of different
thickness in sedimentary rocks like shale, sandstone etc.
Formation of sedimentary rocks
7
NeoStencil – Live Online Classes - IAS/IES/GATE/SSC/PSC | +91 95990 75552 | [email protected]
Classification of sedimentary rocks
Depending upon the mode of formation, sedimentary rocks are classified into
three major groups:
1. Mechanically formed — they are known as Clastic sedimentary rocks because
of their formation by accumulations of clasts: little fragments of broken up rock
material which have been piled up and “lithified” by compaction and
cementation. Conglomerate, sandstone, shale, limestone, loess etc. are some of
the examples of mechanically formed sedimentary rocks.
2. Organically formed— these rocks are formed by an accumulation of living
organisms such as corals or shellfish. These rocks have significant amounts of
organic material. The most famous rocks formed in this way are of the
calcareous type such as Chalk. However, carbonaceous rocks are also
organically formed but from vegetative matter. Geyserite, chalk, limestone, coal
etc. are some examples of organically formed sedimentary rocks.
3. Chemically formed — many of these forms when standing water evaporates,
leaving dissolved minerals behind. These sedimentary rocks form when mineral
constituents in solution become supersaturated and inorganically precipitate.
Chert, limestone, halite, potash etc. are some examples of chemically formed
sedimentary rocks.
Metamorphic Rocks
The word metamorphic means ‘change of form’ whereby ‘meta’ means change
and ‘morph’ means ‘form.’
Metamorphic rocks are formed due to the transformation of a pre-existing rock.
They are predominantly sedimentary or igneous rocks that have undergone
physical and chemical changes under the action of extreme heat and pressure.
Formation of metamorphic rocks can take place under different physical
conditions i.e. in different temperatures (up to 200 °C) and pressures (up to
1500 bars)
8
NeoStencil – Live Online Classes - IAS/IES/GATE/SSC/PSC | +91 95990 75552 | [email protected]
Their natural characteristics undergo a massive transformation in such extreme
conditions of temperature and pressure.
Metamorphic rocks make up a large part of the Earth’s crust and form 12% of
the Earth’s land surface
Gneissoid, granite, syenite, slate, schist, marble, quartzite etc. are some
examples of metamorphic rocks.
Formation of Metamorphic rocks
Metamorphic rocks can simply be formed when the sedimentary or igneous
rocks moves deep inside the earth and come under the influence of high
temperature and pressure of the overlying material.
Formation of metamorphic rocks can take place through tectonic processes
including continental collisions, which may cause changes in pressure and
temperature.
The intrusion of magma on the earth’s surface is also an important cause of
metamorphic transformation.
9
NeoStencil – Live Online Classes - IAS/IES/GATE/SSC/PSC | +91 95990 75552 | [email protected]
Formation of metamorphic rocksMetamorphism is a process by which already
consolidated rocks undergo re-crystallisation and re-organisation of materials
within original rocks.
Dynamic Metamorphism – Dynamic metamorphism refers to mechanical
disruption and reorganization of the original minerals within rocks due to
breaking and crushing without any significant chemical changes.
Thermal Metamorphism – Due to thermal stress the material of rocks undergo
crystal transformation which alters the chemical properties of the rock. There are
two types of thermal metamorphism.
1. Contact Metamorphism – In contact metamorphism the rocks come in contact
with hot intruding magma and lava and the rock materials recrystallise under
high temperatures. Quite often new materials form out of magma or lava are
added to the rocks.
2. Regional Metamorphism – In regional metamorphism, recrystallisation of rocks
takes place as a result of deformations caused by tectonic shearing along with
high pressure and temperature.
Foliation or Lineation – In the process of metamorphism in some rocks grains or
minerals get arranged in layers or lines. This arrangement of minerals or grains in
metamorphic rocks is referred to as lineation or foliation.
Banding – Sometimes minerals or materials of different groups are arranged into
alternating thin to thick layers appearing in light and dark shades. Such
arrangement in metamorphic rocks is commonly referred to as banding. Rocks
that display banding are called banded rocks.
Classification of Metamorphic rocks
Types of metamorphic rocks depend upon original rocks that were subjected to
metamorphism. Metamorphic rocks are classified into two major groups —
1. Foliated rocks – foliated rocks are formed where pressure squeezes or
elongates the crystals due to differential stress, they have a clear preferential
10
NeoStencil – Live Online Classes - IAS/IES/GATE/SSC/PSC | +91 95990 75552 | [email protected]
alignment. Rocks that were subjected to uniform pressure from all sides, or
those that lack minerals with distinctive growth habits, will not be foliated. For
example, the slate is a foliated metamorphic rock, originating from shale.
2. Non-foliated rocks – they are formed where the crystals have no preferential
alignment. Some rocks, such as limestone are made of minerals that simply
don’t elongate, no matter how much stress you apply
Rock cycle
Rock Cycle
Like most Earth materials, rocks are created and destroyed in natural cycles.
Rocks do not remain in their original form for long but may undergo a
11
NeoStencil – Live Online Classes - IAS/IES/GATE/SSC/PSC | +91 95990 75552 | [email protected]
transformation. The rock cycle is a model that describes the formation,
breakdown, and reformation of a rock as a result of sedimentary, igneous, and
metamorphic processes. Rock cycle is a continuous process transforming old rocks
into new ones.
Igneous rocks are primary rocks and other rocks (sedimentary and metamorphic)
are formed from these primary rocks. Igneous rocks can be changed into
metamorphic rocks. Sedimentary rocks are formed from the fragments derived
out of igneous and metamorphic rocks. Sedimentary rocks themselves can turn
into fragments and the fragments can be a source for the formation of
sedimentary rocks.
In the subduction zones in the earth’s crust. The crustal rocks can get inside the
mantel where they melt and become a source of the igneous rock, thereby
completing the rock cycle.
Related terms
Mineral – a mineral is an organic or inorganic substance that occurs naturally on
the earth surface. They have an orderly atomic structure and a definite chemical
composition and physical properties. A mineral consists of two or more elements.
However, sometimes single element minerals like copper, sulphur, gold, silver,
graphite etc. can be found.
Magma and Lava – The mantle contains a weaker zone called asthenosphere. It is
from this that the molten rock materials find their way to the surface. The
material in the upper mantle portion is called magma. Once it starts moving
towards the crust or it reaches the surface, it is referred to as lava
Petrology – Petrology refers to the science of rocks. Under petrology, rocks are
studied with respect to all their aspects viz., mineral composition, structure,
texture, occurrence, origin, alteration and relationship with other rocks.
Weathering – Weathering is an action of elements of weather and climate over
earth materials. Weathering includes mechanical disintegration and chemical
decomposition of rocks through the actions of various aspects of weather and
climate.
12
NeoStencil – Live Online Classes - IAS/IES/GATE/SSC/PSC | +91 95990 75552 | [email protected]
Erosion – Erosion involves acquisition and transportation of rock debris. When
massive rocks are broken into smaller pieces through the process of weathering
or any other process, erosional geomorphic agents like groundwater, running
water, wind, waves and glaciers remove and transport it to other places
depending upon the dynamics of each of these agents.
Diagenesis – Diagenesis is a process which includes the formation of sedimentary
rocks by compaction and cementation of grains, or by crystallization from water
or solutions and recrystallization.
Cementation – Cementation is the process by which clastic sediment is lithified by
precipitation of mineral cement, such as calcite cement, among the grains of the
sediment.
Compaction – compaction is a process through which the porosity of a given
sedimentary material is reduced as a result of its mineral grains being squeezed
together by the weight of overlying sediment.
13
NeoStencil – Live Online Classes - IAS/IES/GATE/SSC/PSC | +91 95990 75552 | [email protected]
Study from India’s Best IAS Teachers LIVE Online
NeoStencil is India's number 1 platform for LIVE online learning. We help you connect with India's best teachers from the comfort of your home.
Some of our popular UPSC Civil Services Exam courses:
UPSC General Studies Foundation Courses offered at NeoStencil
1. Lukmaan IAS 2. Pavan Kumar IAS 3. Destination IAS 4. Toppers 25
UPSC Mains Optional Subjects courses
Pub Ad :S. Ansari, Pavan Kumar, Atul Lohiya (Hindi Medium) Philosophy :Mitrapal Geography :Prof. Majid Husain, Alok Ranjan (English and Hindi Medium), Md. Rizwan Sociology :Praveen Kishore, Vikash RanjanVenkata Mohan, Mujtaba Husain Anthro :Venkata Mohan History :Alok Jha PSIR : Kailash Mishra (English and Hindi Medium), RS. Sharma Law : Dinesh Verma (Scope IAS)
General Studies Mains Test Series:Pavan Kumar IAS, Lukmaan IAS, AAI IAS Pub Ad Test Series :Pavan Kumar Sociology Test Series :Praveen Kishore, Venkata Mohan, Lukmaan IAS Geography Test Series :Prof. Majid Husain, Alok Ranjan (English and Hindi) , Lukmaan IAS Anthro Test Series :Venkata Mohan Essay Test Series :Lukmaan IAS, Venkata Mohan
Current Affairs Online Courses for IAS Exam Preparation
1. Lukmaan IAS 2. Venkata Mohan 3. Mk Yadav 4. Alok Jha
We also Provide Online courses for IES | GATE | SSC | State PCS Exams. For more details visit
our All Courses Page – here