ROCKRIVERTOOL - Rock River Tool Inc

STANDARD AND SPECIALCARBIDE TIPPED CUTTING TOOLS

MADE IN USA

PRICED CATALOG

2018

2953 63rd Avenue East, Bradenton, FL 34203 Phone (800) 345-8924 Fax (800) 867-9312

E-Mail: [email protected] www.rockrivertool.com

ROCK RIVER TOOL INC.

MADE IN USA

ROCK RIVER TOOL, INC.2 PHONE (800) 345-8924 FAX (800) 867-9312 www.rockrivertool.com

COMPARISON CHART OF CARBIDE TIPPED

DESCRIPTION - USEFRAC.

PAGE

METRIC

PAGE

TOOL

TYPECJT CLEVELAND FULLERTON

CHICAGO

LATROBEMORSE

PTD/

DORMERIMCO

DRILLS -Die Drill - Negative Edge 118° Point 12 12 2670 — — — HD 5423 D000 —

Die Drill - Negative Edge 140° Point 12 — 2671 — — — — — — —

Die Drill - Positive Edge 118° Point 12 12 2672 150 760 40 HD — — — 4850

Die Drill - Positive Edge 140° Point 12 — 2673 — — — — — — —

Die Drill - Spade Type 120° Point 13 — 2674 152 — — — 5420 — —

Die Drill - Spade Type 140° Point 13 — 2675 — — — — — — —

Jobbers Length - 118° Regular Point 14 15 2600 120 2727 40 CT CTD 5330 D444 2850

Jobbers Length - 135° Split Point 14 15 2601 125 — — — — — —

Jobbers Length Tanged - 118° Regular Point 16 17 2690 — — — — — — —

Jobbers Length Tanged - 135° Split Point 16 17 2691 — — — — — — —

Stub Length - 118° Regular Point 18-19 19 2640 110 — — — — — —

Stub Length - 135° Split Point 18-19 19 2641 115 — — — — — —

Taper Length - 118° Regular Point 20 21 2630 130 2745 40 TL TLD 5314 D555 3850

Taper Length -135° Split Point 20 21 2631 — — — — — — —

Taper Shank - 118° Regular Point 22 — 2660 140 2740 40 TLT TSD 5302 D999 —

Taper Shank - 135° Split Point 22 — 2661 — — — — — — —

Aircraft Extension - 6" Length 23 — 2610 — — — — — — —

Aircraft Extension - 12" Length 23 — 2611 129 — — — — — —

Jobber Length Cobalt Drill - 135° Split Point 24 — 2699 — — — — — — —

Jobbers Length Solid Carbide Drill - 118° Split Point 25 — 2860 — — — — — — —

Coolant Fed - Short Length - 125° Point 26 28 2652 171 — — — — — —

Coolant Fed - Long Length - 125° Point 27 27 2650 170 — — — — — —

Coolant Fed - Extra Long - 125° Point 28 — 2658 172 — — — — — —

Silver & Deming - 118° Regular Point 29 — 2616 163 — — — — — —

Silver & Deming - 135° Split Point 29 — 2618 — — — — — — —

Spot/Center (CNC) 90° Short or Regular Length 29 — 2647/2677 — — — — — — —



Reduced Shank Diameter - Stub Length 30 — 2640/2641 — — — — — — —

Reduced Shank Diameter - Jobbers Length 30 — 2600/2601 — — — — — — —

Reduced Shank Diameter - Hard Steel Die 30 — 2670/2672 — — — — — — —

Masonry Drill 31 — 2681-4 — Yes — — Yes Yes —

Glass & Tile Drill 31 — 2680 162 — — — 5467 PG 6 —

Core Drill - Straight Shank 32 33 2620 — — — — 5456 — —

Core Drill - Taper Shank 32 33 2622 410 — — — 5454 — —

CENTERS -Morse, B&S, Jarno Taper (Full & Half ) 34 — 2592-7 — 790 — — 5292-7 — —

REAMERS -Stub Length - Straight Flutes 35 — 2430 — — 50SM — 5670 — —

Stub Length - Left Spiral Flutes 35 — 2440 — 4701 50SML — 5669 — —

Coolant Fed for Blind Holes - Straight Flutes 36 — 2424 452 — — — — — —

Coolant Fed for Through Holes - Straight Flutes 37 — 2426 452A — — — — — —

Coolant Fed for Blind Holes - Right Spiral Flutes 38 — 2413 453 — — — — — —

Coolant Fed for Through Holes - Right Spiral Flutes 39 — 2418 453A — — — — — —

Coolant Fed for Through Holes - Left Spiral Flutes 40 — 2428 — — — — — — —

Straight Shank - Straight Flutes 42-43 41 2400 450 4703 50SS — 5655 — —

Dowel Pin Sizes 43 — 2476 450 — — — — — —

Over & Under Sizes 43 — 2478 450 — — — — — —

Decimal Sizes 44-47 — 2400 — — — — — — —

Taper Shank - Straight Flutes 48 49 2402 — — 50TS — 5656 — —

Flute Long Carbide - Straight Shank 50 51 2450 480 — 50SF — 5659 — —

Decimal Sizes 52-54 — 2450 — — — — — — —

Shell Reamer - Straight Flutes 55 — 2431 — — — — 5625 — —

Flute Long Carbide - Taper Shank 56 57 2452 — — — — 5660 — —

Steel Cutting - Straight Shank & Flutes 58-59 — 2480 — — — — — — —

Steel Cutting - Dowel Pin Sizes 59 — 2486 — — — — — — —

Steel Cutting - Over & Under Sizes 59 — 2488 — — — — — — —

NAS 897 - Flute Long Carbide - Straight Shank 60 — 2458 — — — — — — —

Extended Length - Flute Long Carbide - Straight Shank 61 2458EL

NAS 897 - Straight Shank & Flutes 62 — 2408 — 4703 — — — — —

Right Spiral Flute - Straight Shank 63 — 2410 470 4711 50SR — 5653 — —

Left Spiral Flute - Straight Shank 63 — 2420 — 4709 50SL — 5651 — —

Expansion Reamer - Straight Shank 64 65 2465 490 704 50ES — 5733 — —

Expansion Reamer - Taper Shank 66 67 2467 495 716 50ET — 5734 — —

Solid Carbide Head Reamer - Straight Flutes 68 — 2800 — — 1450 — — — 9500

Solid Carbide Head Reamer - Right Spiral Flutes 69 — 2810 — — 1450R — — — —

Solid Carbide Head Reamer - Left Spiral Flutes 69 — 2820 — — 1450L — — — —

Solid Carbide - Straight Flutes - .0005 Inc. 70 — 2804 — — — — — — —

Solid Carbide - Straight Flutes - Frac/Metric 71 71 2804 — 1730 1400 — 5661 — —

Solid Carbide - Straight Flutes - Wire/Letter 71 — 2804 — — 1400 — — — —

Solid Carbide - Straight Flutes 72 — 2802 — 1730 1410 — — — —

Solid Carbide - Right Spiral Flutes 72 — 2812 — 1711 1410R — — — —

Solid Carbide - Left Spiral Flutes 72 — 2822 — — 1410L — — — —

Semi-Finished Reamer 73 — 7 Types — — — — — — —

— — — — — — — — — —

— — — — — — — — — —

— — — — — — — — — —

— — — — — — — — — —

— — — — — — — — — —

— — — — — — — — — —

— — — — — — — — — —— — — — — — — — — —

MADE IN USA

PHONE (800) 345-8924 FAX (800) 867-9312 ROCK RIVER TOOL, INC. 3www.rockrivertool.com

CUTTING TOOLS

STOCK STANDARDS

DESCRIPTION - USEFRAC.

PAGE

METRIC

PAGE

TOOL

TYPECLEVELAND GAY-LEE PUTNAM FULLERTON MORSE NIAGARA WHITNEY

COUNTERBORES -Replaceable Pilots 73 — 2500 Yes — — — 776 — —

Three Flutes - Reduced Shank 74 — 2522 — — — — — — —

Four Flutes - Straight Shank 75 — 2512 — — — — — — —

Three/Four Flutes - Straight Shank 75 — 2514 779 — — — 5779 — —

Four Flutes - Taper Shank 76 — 2518 — — — — — — —

Three/Four Flutes - Taper Shank 76 — 2516 — — — — 5780 — —

Steel Cutting - Straight Shank 77 — 2510 — — — — — — —

Steel Cutting - Taper Shank 77 — 2511 — — — — — — —

Capscrew - Straight Shank - N/F & Cast Iron 78 78 2513 — — — — — — —

Capscrew - Straight Shank - Steel 78 78 2515 — — — — — — —

PORT CONTOUR CUTTERS -SAE Ports - MS16142 - J514F - J1926 - SS - N/F &CI 79 — 2780 — — — — — — —

SAE Ports - MS16142 - J514F - J1926 - SS - Steel 79 — 2781 — — — — — — —

MS 33649 Integral Reamer Pilot - SS - N/F & CI 79 — 2792 — — — — — — —

MS 33649 Integral Reamer Pilot - SS - Steel 79 — 2793 — — — — — — —

END MILLS -Shell End Mill - Non-Ferrous 80 — 2530 — — — — 5858 4920 —

Shell End Mill - Cast Iron 80 — 2531 — — — — 5859 4900 —

Shell End Mill - Steel 80 — 2532 — — — — 5860 4910 —

15° Right Spiral - Steel 80 — 2350 — — HES 60GSS 5960 4820 —

25° Right Spiral 81 — 2325 — — HNS 60FS 5958 4860 —

15° Right Spiral 81 — 2375 — — HLS — 5962 4840 —

Two Straight Flutes - Steel 82 — 2300 — — — 60TFS 5927 — —

6° Right Spiral Flutes - Steel 82 — 2308 — — — 60RSS — — —

6° Left Spiral Flutes - Steel 82 — 2310 — — LSEM 60LSS 5964 — —

Two Straight Flutes 83 — 2302 — — TFEM 60TF 5923 4700 —

Four Straight Flutes 83 — 2304 — — EM 60EM 5925 4750 —

6° Right Spiral Flutes 83 — 2306 — — RSEM 60RS 5921 — —

Corner Rounding - Non-Ferrous & Cast Iron 84 — 2740 — — — — — — —

Corner Rounding - Steel 84 — 2741 — — — — — — —

Center Cutting - Cast Iron 84 — 2314 — — SKM 60SK 5935 4800 —

Center Cutting - Steel 84 — 2312 — — — 60SKS 5936 4780 —

Center Cutting - Non-Ferrous 84 — 2318 — — — 60CS 5966 — —

COUNTERSINKS -Single Flute - 60° 85 — 2561 791 — — — — — —

Single Flute - 82° 85 — 2581 791 — — — — — —

Single Flute - 90° 85 — 2591 — — — — — — —

Single Flute - 100° 85 — 2584 — — — — — — —

Three Flutes - 60° 85 — 2563 793 — — — — — —

Three Flutes - 82° 85 — 2583 793 — — — — — —

Three Flutes - 90° 85 — 2590 — — — — — — —

Three Flutes - 100° 85 — 2585 — — — — — — —

CUTTERS - SHANK TYPEDouble Angle - 60° & 90° - Non-Ferrous & Cast Iron 85 — 2746/2748 — — — — — — Yes

Double Angle - 60° & 90° - Steel 85 — 2747/2749 — — — — — — —

Keyseat - Straight Tooth - Non-Ferrous & Cast Iron 86 — 2700 — — — — — CB444 120

Keyseat - Staggered Tooth - Non-Ferrous & Cast Iron 87 — 2701 — — — — — — 121

Keyseat - Straight Tooth - Steel 88 — 2702 — — — — — — —

Keyseat - Staggered Tooth - Steel 89 — 2703 — — — — — — —

Keyseat - Straight Tooth - Aluminum 90 — 2704 — — — — — — —

T-Slot - Non-Ferrous & Cast Iron 91 — 2720 — — — — — — Yes

T-Slot - Steel 91 — 2721 — — — — — — —

Dovetail - 45° Included & 60° Included Angle - N/F & CI 91 — 2734/2736 — — — — — — Yes

Dovetail - 45° Included & 60° Included Angle - Steel 91 — 2735/2737 — — — — — — —

Chamfer Milling - 45° & 60° - Non-Ferrous & Cast Iron 92 — 2730/2732 — — — — — — Yes

Chamfer Milling - 45° & 60° - Steel 92 — 2731/2733 — — — — — — —

Radius - Non-Ferrous & Cast Iron 92 — 2718 — — — — — — Yes

Radius - Steel 92 — 2719 — — — — — — —

CUTTERS - ARBOR TYPESingle Angle - 45° & 60° Right - N/F & CI 93 — 2714/2724 — — — — — — —

Single Angle - 45° & 60° Left - N/F & CI 93 — 2716/2726 — — — — — — —

Double Angle - 45°, 60° & 90° Include Angle - N/F & CI 93 — 2750/2752/2754 — — — — — — —

Side Milling - Staggered Tooth 93 — 2547 — — — — — — —

Side Milling - Non-Ferrous 94 — 2540 — — — — 5861 1630 —

Side Milling - Cast Iron 94 — 2541 — — — — 5862 1590 —

Side Milling - Steel 94 — 2542 — — — — 5863 1550 —

Side Milling - High Temp Alloy 94 — 2543 — — — — 5849 — —

Slitting Saws - Coarse Tooth - Non-Ferrous 95 — 2550 — CNF — — 5846 4690 —

Slitting Saws - Coarse Tooth - Cast Iron 95 — 2552 — CCI — — 5847 4240 —

Slitting Saws - Coarse Tooth - Steel 95 — 2554 — CST — — 5848 4220 —

Slitting Saws - Coarse Tooth - High Temp Alloy 95 — 2558 — GSS — — 5850 4260 —

Slitting Saws - Standard Tooth - Non-Ferrous 96 — 2551 1361 GPP — — — — —

Slitting Saws - Standard Tooth - Cast Iron 96 — 2553 1361 GPP — — — — —

Slitting Saws - Standard Tooth - Steel 96 — 2556 1360 STL — — — — —

Slitting Saws - Standard Tooth - High Temp Alloy 96 — 2559 — GSS — — — — —

Slitting Saws - Any Width, Radius, or Chamfer - Steel 97-100 — 2556 — — — — — — —

Slitting Saws - Any Width, Radius, or Chamfer - Multi Purpose 101-104 — 2559 — GSS — — — — —

BRAZED SINGLE POINTSSingle Points 105-106 — 26 Types — — — — 26 Types — —

Cut-O$ Tools 107 — 2 Types — — — — 2 Types — —

— — — — — — — — — —

— — — — — — — — — —

— — — — — — — — — —

— — — — — — — — — —— — — — — — — — — —

Name ____________________________________________________________________________

Company _________________________________________________________________________

Full Address _______________________________________________________________________

Material Being Cut ________________________________________________________________

REAMER KEYSEATCOUNTERBORE DOVETAILEND MILL

BODY OF TOOL

FLUTES

T= _______________ Overall Length

E= _______________ Flute Length F= _______________ Carbide LengthG= ___________________º Chamfer Angle

S= _______________ Shank Diameter A= ___________________Major Diameter

IF PILOTED Head Diam. _____________

D= ________________

W= _______________

A= _______________

N= _______________

H= _______________

K= _______________

R1= _____________

R2= _____________

Head Length _________________ M= Min. Cutting Diam.___________

IF STEP REAMER Minor Diam. __________ Step Length ___________ Step Angle __________º

IF KEYSEAT

N= ______________ Neck Diam. J= ____________º Angle W= ___________ Width

Right Hand Cutting Straight FlutesNumber of Flutes __________

Left Hand Cutting Left Hand Spiral ________________ º

MILLING CUTTERS & SAWS

R1= ___________ Radius/ChamferR2= ___________ Radius/Chamfer

Straight Tooth

Staggered Tooth

Straight Stagger

Straight Tooth

Cutter Diameter

Cutter Width

Arbor Hole Diam.

# of Teeth

Hub Diameter

Keyway Size

Radius/Chamfer

Radius/Chamfer

Herringbone Stagger

R= _____________ Radius

Right Hand Spiral _____________º

IF DOVETAIL

MILLING CUTTER

SLITTING SAW ANGLE CUTTER

W= _________ Width

N= _________ Neck Diameter

(Fill in “J” & “R”)

Rock River Tool will manufacture your special tools quickly and competitively.

Phone ___________________________________ _____

Fax ___________________________________________

Tipped or Solid? ____________________________

HOW MANY ?____________________________________

Solid CarbideCarbide Tipped

Solid CarbideCarbide Tipped

SPECIAL TOOLS QUOTE FORM Fax to: (800) 867-9312 or Email to: [email protected]

MADE IN USA


MADE IN USA


DECIMAL EQUIVALENTSFRACTIONAL, WIRE, LETTER & METRIC SIZES

FRAC.

INCHWIRE

METRIC

mm

DECIMAL

INCH

43

42

2.32.35

.0890

.0906

.0925

.0935

3⁄32

412.4

2.45

.0938

.0945

.0960

.0965

40

3938

2.5.0980.0984.0995.1015

37

36

2.6

2.7

.1024

.1040

.1063

.1065

7⁄6435

2.75

2.8

.1083

.1094

.1100

.1102

3433

322.9

.1110

.1130

.1142

.1160

1⁄8

313.0

3.1

.1181

.1200

.1220

.1250

30

3.23.25

3.3

.1260

.1280

.1285

.1299

29

28

3.4

3.5

.1339

.1360

.1378

.1405

9⁄64

273.6

3.7

.1406

.1417

.1440

.1457

26

253.75

3.8

.1470

.1476

.1495

.1496

5⁄32

24

233.9

.1520

.1535

.1540

.1562

22

2120

4.0.1570.1575.1590.1610

19

4.14.2

4.25

.1614

.1654

.1660

.1673

11⁄6418

17

4.3 .1693.1695.1719.1730

16

15

4.4

4.5

.1732

.1770

.1772

.1800

FRACTION

INCH

METRIC

mm

DECIMAL

INCH

½

33⁄6417⁄32

13.0.5000.5118.5156.5312

35⁄64

9⁄16

13.5

14.0

.5315

.5469

.5512

.5625

37⁄64

19⁄32

14.5

15.0

.5709

.5781

.5906

.5938

39⁄64

5⁄815.5

16.0

.6094

.6102

.6250

.6299

41⁄64

21⁄3216.5

17.0

.6406

.6496

.6562

.6693

43⁄6411⁄16

45⁄6417.5

.6719

.6875

.6890

.7031

23⁄32

47⁄64

18.0

18.5

.7807

.7188

.7283

.7344

¾49⁄64

19.0

19.5

.7480

.7500

.7656

.7677

25⁄32

51⁄6420.0

20.5

.7812

.7874

.7969

.8071

13⁄16

53⁄6427⁄32

21.0.8125.8268.8281.8438

55⁄64

7⁄8

21.5

22.0

.8465

.8594

.8661

.8750

57⁄64

29⁄32

22.5

23.0

.8858

.8906

.9055

.9062

59⁄64

15⁄1623.5

24.0

.9219

.9252

.9375

.9449

61⁄64

31⁄3224.5

25.0

.9531

.9646

.9688

.9843

63⁄641

11⁄6425.5

.98441.00001.00391.0156

11⁄32

13⁄64

26.0

26.5

1.02361.03121.04331.0469

FRAC.

INCH

WIRE/

LETTER

METRIC

mm

DECIMAL

INCH

1413

4.6

4.74.75

.1811

.1820

.1850

.1870

3⁄161211

4.8

4.9

.1875

.1890

.1910

.1929

109

85.0

.1935

.1960

.1969

.1990

13⁄647

6

5.1 .2008.2010.2031.2040

55.2

5.255.3

.2047

.2055

.2067

.2087

4

35.4

5.5

.2090

.2126

.2130

.2165

7⁄32

25.6

5.7

.2188

.2205

.2210

.2244

15.75

5.85.9

.2264

.2280

.2283

.2323

15⁄64A

B6.0

.2340

.2344

.2362

.2380

C

D

6.1

6.2

.2402

.2420

.2441

.2460

¼ E

6.256.3

6.4

.2461

.2480

.2500

.2520

F

G

6.5

6.6

.2559

.2570

.2598

.2610

17⁄64

H

6.7

6.75

.2638

.2656

.2657

.2660

I

6.86.9

7.0

.2677

.2717

.2720

.2756

9⁄32

J

K7.1

.2770

.2795

.2810

.2812

L

7.27.257.3

.2835

.2854

.2874

.2900

FRAC.

INCHLETTER

METRIC

mm

DECIMAL

INCH

19⁄64

M7.4

7.5

.2913

.2950

.2953

.2969

N7.6

7.77.75

.2992

.3020

.3031

.3051

5⁄16

7.87.9

8.0

.3071

.3110

.3125

.3150

O

P

8.18.2

.3160

.3189

.3228

.3230

21⁄64

8.258.3

8.4

.3248

.3268

.3281

.3307

Q

R

8.58.6

.3320

.3346

.3386

.3390

11⁄328.7

8.758.8

.3425

.3438

.3445

.3465

S

T

8.99.0

.3480

.3504

.3543

.3580

23⁄649.1

9.29.25

.3583

.3594

.3622

.3642

U9.3

9.49.5

.3661

.3680

.3701

.3740

3⁄8V

9.69.7

.3750

.3770

.3780

.3819

W

9.759.8

9.9

.3839

.3858

.3860

.3898

25⁄64

XY

10.0.3906.3937.3970.4040

13⁄32

27⁄64

Z10.5

.4062

.4130

.4134

.4219

7⁄16

29⁄34

11.0

11.5

.4331

.4375

.4528

.4531

15⁄32

31⁄6412.0

12.5

.4688

.4724

.4844

.4921

MADE IN USA


CARBIDE TIPPEDPROBLEM SOLVING GUIDE

DRILLING PROBLEMS POSSIBLE CAUSES POSSIBLE SOLUTIONS1. CHIPPED CUTTING EDGE

2. SHORT TOOL LIFE

3. DRILL WALKS OR DRIFTS

4. OVERSIZED HOLES

5. ROUGH FINISH

Excessive feedExcessive lip reliefVibrationThermal cracking carbideDrill dwellingOnly one lip cuttingUnequal lip heightsWorn drill bushingUnequal lip heightsExcessive lip reliefWorn drill bushingDull cutting edgeInadequate coolantImproper speed & feed

Reduce feed.Reduce lip relief to provide smaller chisel angle.Frequently a worn drill bushing replace.Maintain adequate coolant jow at all times.Maintain adequate feed at all times.Regrind with equal lip heights and chisel in center.Regrind with equal lip heights and chisel in center.Replace drill bushing.Regrind with equal lip heights and chisel in center.Reduce lip relief to provide smaller chisel angle.Replace drill bushing.Regrind with {ne grit diamond wheel.Review type of coolant and maintain adequate jow.Review speed & feed (chart on page 9)

REAMING PROBLEMS POSSIBLE CAUSES POSSIBLE SOLUTIONS1. POOR FINISH

2. OVERSIZED HOLES TAPERED HOLES BELL MOUTH HOLES3. EXCESSIVE TOOL WEAR

4. CROOKED HOLES

5. TOOL BREAKAGE

Unequal chamfersIncorrect marginsExcessive spindle runoutChatter

Insu|cient cutting action

Misalignment

Incorrect feed and/or speedImproper stock removalExcessive reaming pressure

MisalignmentDrill walking or incorrectsharpeningExcessive reaming pressureMisalignment

Regrind reamer with equal chamfer height.Regrind reamer with narrower margins for reaming higher tensile materials.Use bushing — .0002”/.0003” over reamer diameter.Increase speed and reduce feed rate.Use power feed unless material is hard.Use spiral juted reamer.Grind secondary lead angle immediately behind 45° chamfer.Specify reamer with positive radial rake to reduce cutting pressure — may produce slightly larger diameter holes.Check {xturing & setup for possible causes; use joating holder if necessary.Consider using precision bushings or piloted reamers.Verify feeds & speeds (see page 9).Change pre-ream hole size to leave 2 to 3% of tool diameter.Decrease feed rate (see “Feeds & Speeds” Chart on page 9).See solution for “improper stock removal” in #3.See solution for “misalignment” in #2.Correct drilling operation - reamer will follow drilled hole.Increase 90° included chamfer angle to 120° – 180°.See solution for “excessive reaming pressure” in #3.See solution for “misalignment” in #2.

MILLING PROBLEMS POSSIBLE CAUSES POSSIBLE SOLUTIONS1. ROUGH FINISH

2. EXCESSIVE CUTTING EDGE WEAR

3. CHIPPED CUTTING EDGE

4. CHATTER MARKS

5. GLAZED FINISH

6. POOR TOOL LIFE

Dull cutting edgeWrong feeds & speedsWrong feeds & speeds

Rough cutting edgeInsu|cient coolantPoor chip removalRecutting work hardened chipsVibrationIncorrect carbide gradeInsu|cient machine horsepowerVibration

Feed to lightDull cutting edgeInsu|cient clearanceExcessive cratering

Milling abrasive material

Milling surface scaleMilling hard materialInsu|cient chip roomDelayed resharpeningThermal cracked carbide

Resharpen to original tool geometry.Increase speed – also try reduced feed.Increase feed (should always be over .001” per tooth) – especially when machining ductile or free machining materials – Also try reduced speed.Lightly hone cutting edge with {ne grit diamond hone.Increase coolant jow – review type of coolant.Use tool with larger jute space – larger diameter or fewer jutes.Increase coolant jow.Increase rigidity of set-up, especially worn tool holders.Change to tougher carbide grade.Use tool with fewer jutes as correct speeds & feeds must be maintained.Consider climb milling.Check setup rigidity.Use larger diameter cutter.Resharpen tool with more clearance.Increase feed.Resharpen tool to original geometry.Resharpen tool with more clearance.Increase speed or decrease feed.Change to harder grade of carbide.Decrease speed and increase feed.Increase coolant jow.Climb milling better than conventional milling.Conventional milling better than climb milling.Reduce speed – rigidity very important.Use larger diameter tool.Prompt resharpening to original geometry will increase total tool life.Increase coolant jow at all times.Climb milling is cooler than conventional milling.

AVOID

PROBLEMS

BY CAREFUL

ORIGINAL

SET-UP

MACHINE CONDITION

TOOL CONDITION

FEEDS & SPEEDS

COOLANT

– Tool holder in good condition & secure part holding {xture.

– Use cutting tool recommended for material being machined. Avoid excessive tool overhang.

– Start with feeds & speeds recommended for material being machined.

– Where used, coolant jow must be adequate to avoid intermittent quenching and to jush chips promptly, avoiding the recutting of hardened chips.

MADE IN USA


DISTRIBUTORS - Rock River Tool sells through industrial distributors who are your local supply, service and communication link with us.

SHIPPING - All shipments are normally sent UPS to the distributor. However, every day distributors request “next day delivery” or “drop shipments” to customers that must have the tools immediately.

ORDERING - The Rock River EDP number listed for each size of every tool type is the only description required when ordering. However, as a cross-check for possible copying errors, most orders also note a brief tool description.

MODIFICATIONS - Over 30% of the standard tools ordered include one or more simple modi{cations. Each catalog page lists the most commonly re- quested modi{cations for that type of tool. Rock River’s modi{cations are competitively priced with prompt delivery.

COMMUNICATIONS - We prefer that all communications be directed through your local industrial distributor. However, in emergencies Rock River can be reached at: Sales/Engineering: 1-800-345-8924 Fax: 1-800-867-9312 E-mail: [email protected]

QUALITY ASSURANCE - Rock River has a very compre-hensive measurement instrument dimensional control system. We apply statistical techniques wherever ap-propriate to assure manufacturing process control and e$ective {nal inspections.

TOLERANCES - All Rock River’s standard tools are manu-factured to one or more of the following speci{cations, unless otherwise shown on selected sizes: ASME/ANSI Standards NAS 907 - National Aerospace Standards USCTI - United States Cutting Institute ISO - International Standard Organization

CARBIDE GRADES - All Rock River’s standard tools are manufactured with correct proven grade of carbide for the intended applications. We only utilize carbide that is made by major reputable manufacturers.

TOOL PERFORMANCE - Although the tool’s price is always important, the real measure of tool value is the tool’s performance in the user’s plant – machining piece parts to correct dimensions with proper surface {nishes utilizing high feeds and speeds with a long tool life between grinds.

CHANGES - All speci{cations and dimensions are subject to revision without notice.

GENERAL INFORMATION

MORE COST EFFECTIVE THAN HIGH SPEED STEEL TOOLS

1. Carbide tipped tools retain their cutting edge hardness at high machining temperatures generated by high cutting speeds

and feeds that reduce machining cycle time.

2. Carbide tipped tools improve surface {nish and hold size far longer for better quality.

3. Carbide tipped tools last far longer because the carbide chip forming surface resists wear as the chip jows over the tools.

This greatly reduces need for costly changes with increased scrap and rework.

4. Carbide tipped tools should always be used when machining highly abrasive materials.

USUALLY MORE COST EFFECTIVE THAN SOLID CARBIDE

1. Carbide tipped tools are far more durable than solid carbide tools. Under abnormal conditions the carbide may start to

crack due to hard spots in the material being machined, incorrect feed rates or inadequate holding of workpiece. These

cracks that shatter solid carbide tools are stopped in carbide tipped tools by the tough hardened alloy steel body - usually

permitting the tool to complete the production run.

2. The carbide grade in carbide tipped tools can be selected wholly based on its cutting and wear characteristics rather than

compromising for the carbide's structural strength, as is required for solid carbide tools. Some high cost specialty carbides

necessary for aggressive machining of many tough alloys are not even available in solid carbide round form.

3. Although carbide tipped tools use higher quality more costly carbide, the overall cost is usually substantially less than solid

carbide tools because only the thick cutting edge is carbide. The body and shank are made from less costly tough hardened

alloy steel.

WHY USE CARBIDE TIPPED TOOLS?

MADE IN USA


• TYPES OF MILLING: In conventional milling, the direction of the cutter

rotation is opposite to the direction of the workpiece feed. The initial

portion of the chip generated is very thin and gradually increases

through the cutting cycle. The maximum cutting force is upward at the

end of the cutting cycle.

• In climb milling, the direction of the cutter rotation and the direction of

the workpiece feed are the same. The initial portion of the chip gener-

ated is thick and gradually thins through the cutting cycle, producing a

better {nish. The maximum cutting force is the initial downward thrust

at the beginning of the cutting cycle.

• SLITTING SAWS can be used in deep slotting applications since they have

side clearance and side concavity on their carbide tips.

• ARBOR DIAMETER: Select largest diameter available to maximize rigidity and

minimize dejection. (A 1 1/4” arbor is more than twice as rigid as a 1” arbor.)

• CUTTING DIAMETER: Select smallest diameter which permits two teeth to

be in contact with the workpiece throughout the tool’s entire revolution.

If horsepower permits higher cutting speeds, but spindle speed is limited,

select a larger cutting diameter.

• NUMBER OF TEETH: Select coarse teeth for general purpose. Select

standard teeth for better {nishes.

SLITTING SAW AND SIDE MILLING CUTTER SELECTION BASICS –

END MILL SELECTION BASICS –

• END MILLS have cutting teeth on both end and side, permitting end cutting

and peripheral cutting. Center cutting types permit plunge and traverse

milling.

• CUTTING EDGE: Select sharp edged for faster speeds. Select radial edged

for longer tool life.

• SHANK DIAMETER: Select largest diameter available to maximize rigidity

and minimize axial dejection and chatter.

• NUMBER OF FLUTES: Select fewer $utes for milling softer materials at

higher speeds and feeds where more chip space is required or when

machine horsepower is limited.

• Select more $utes for milling tougher materials at reduced speeds and

feeds or for increased table feeds using the same cutting speeds.

• CUTTING DIAMETER: Select largest practical diameter to maximize

rigidity, minimize chatter and improve tool life. If machine spindle speed

is limited, the largest practical diameter permits higher cutting speeds.

• FLUTE AXIAL RELATIONSHIP: Select straight $utes for usual general

purpose.

Select right spiral $utes for improved cutting action and easier chip

removal.

Select left spiral $utes for use in absorbing impact shock when entering

steel workpiece—maintains constant hold down pressure, and mini-

mizes chatter.

Select high spiral (15° or more) to dramatically improve cutting action,

{nish, chip removal and tool life. High spirals distribute impact load

more evenly throughout the tool’s entire revolution.

• COATINGS are especially e$ective.

COUNTERBORE SELECTION BASICS –

• The counterbore is used to enlarge the end of a preformed hole when a

jat bottom is required.

• The counterbore is an end cutting tool which utilizes a pilot to align the

enlarged hole being machined with the preformed hole.

• The three jute counterbore tends to reduce chatter & improve {nish.

• Many di$erent shank options are available.

REAMER SELECTION BASICS –

• Carbide tipped reamers are especially appropriate for close tolerance

reaming. Because carbide is extremely resistant to wear, the reamer will

produce accurate hole size and smooth {nish far longer.

• The reamer is used to {nish machine a previously formed hole to an exact

diameter with a smooth {nish. It should not be used to signi{cantly

enlarge a hole (max. 5% - depending on material and hardness).

• The reamer is an end cutting tool, cutting only on the chamfer’s edge at

the outside diameter of the preformed hole. The standard 45° chamfer

angle provides e$ective cutting action for most materials.

• Standard geometry reamers tend to follow the axis of the existing hole. Mis–

aligned or crooked holes can be straightened by increasing the chamfer angle

- sometimes a 180° jat end is very e$ective. This is a simple modi{cation.

• FLUTE AXIAL RELATIONSHIP:

Straight Flutes - usual general purpose.

Right Spiral Flutes - tend to bridge interruptions such as keyways, slots

or intersecting holes. Good chip clearing ability for ductile materials and

blind holes.

Left Spiral Flutes - also tends to bridge interruptions. Good for hard cast

iron, heat treated steels and other hard materials. Do not use in blind holes.

• LENGTH OF CARBIDE - usually partial but full length carbide should be

selected for deep holes and abrasive materials.

• COOLANT FEEDING:

Advantages - up to twice conventional feed rates will hold size much

longer. Improved hole surface {nish. Excellent chip disposal. Lubricates

and cools the cutting edge.

Center Feed for blind holes. Flute Feed for through holes.

• EXPANSION REAMERS - Economical for abrasive materials.

DRILL SELECTION BASICS –

• Carbide tipped drills are especially e$ective when production drilling

abrasive cast irons and non-ferrous alloys.

• Carbide tipped coolant drills perform exceptionally well in most steels

and all other materials.

• The drill is an end cutting tool and as the point angle increases, the

cutting edge becomes shorter, reducing corner wear as the cutting shear

angle is reduced. Rock River provides two di$erent point angles in most

drill types. Select the larger angle for abrasive or tough materials.

• Deep holes, in excess of 3 drill diameters—use coolant feeding drills.

• For drilling hardened steels, above Rc35—use straight jute die drills or

coolant type.

• Use shortest tool available for accurate location and longer production

runs as rigidity is increased and runout minimized.

• Core Drills are very e$ective for enlarging preformed holes, removing up

to 30% of the tool diameter in all materials, including steel.

CARBIDE TIPPEDTOOL SELECTION BASICS

MADE IN USA


MODIFICATIONS AND COATINGS

• Improve standard cutting geometries for di|cult machining materials-

abrasive or extra tough.

• Incorporates cutting form to eliminate need for additional machining.

• Improve tool holding or driving.

DRILL OPTIONAL MODIFICATIONS• Intermediate cutting diameters to eliminate reaming operation.

• Special point types and point angles:

- 135° split point for drilling abrasive and tough materials.

- 90° point for drilling soft materials.

- Double point angles to reduce breakout bur and corner wear.

• Coating to increase cutting speeds and feeds and reduce wear.

• Flat or tang on shank for positive drive.

• Short shanks to reduce run out due to set-up.

• Extra long shanks to solve reach problems.

• Reduced shank diameter or undersized Morse taper to accommodate

tool holding limitations.

REAMER OPTIONAL MODIFICATIONS• Intermediate cutting diameters-priced on each reamer type data page.

• Closer tolerances-instead of plus .0003".

For plus .0002" - add $1.00 per tool.

For plus .0001" - add $3.00 per tool.

• Sharpen {nish 30 micro inch or better.

• End chamfer other than 45°.

- Less than 45° tend to straighten hole.

31° to match 118° drill point at bottom of drilled hole.

22 1/2° to match 135° drill point at bottom of drilled hole.

- Greater than 45° tend to thin out chips that resist breaking.

- Greater than 45° will produce better {nishes and will follow drilled hole.

- End Cutting - 180° chamfer (jat end - no chamfer).

• Corner radius - for better {nish.

- for stronger corner in abrasive and tough materials.

• Special O.D. relief depending on material being reamed.

• Reduce circular margins for some steels.

• Increase circular margins for some non-ferrous.

• Grind steel head below carbide-usually .008"-.020" to improve {nish-

normally much better to use full length carbide design.

• “Rose” Grind - Twice the normal back taper and full circle on the margin

(not relieved). To improve {nish but this reduces tool life.

• Cutting diameter partially reduced for non-cutting pilot.

• Cutting diameter partially reduced for cutting step.

• Coating to increase cutting speeds and reduce wear.

• Shortened shank reduces runout due to set-up.

• Reduced shank diameter or undersize morse taper shank to accommo-

date tool holder limitations.

• Flat or tang on shank for positive drive.

COUNTERBORE OPTIONAL MODIFICATIONS• Intermediate cutting diameter - priced on each counterbore type data page.

• Closer tolerance than .001" on cutting diameter.

• End chamfer other than 180° when used as a piloted countersink or hole

bottom form operation.

• Corner radius for improved {nish.

• Cutting diameter ground down for small cutting step.

• Drive jat or tang on shank for positive drive.

• Shortened shank reduces runout due to set-up.

• Reduce shank diameter or undersize morse taper shank to accommo-

date tool holder limitations.

• Closer tolerance for cutting face width and cutting

diameter.

• Alternate chamfer every other tooth.

• Reduce neck diameter.

• Drive jats on shanks for positive drive.

SLITTING SAW & SIDE MILLING CUTTER OPTIONAL MODIFICATIONS• Full radius.

• Chamfer both sides.

• Radius both sides.

KEYSEAT CUTTER OPTIONAL MODIFICATIONS

RECOMMENDED COATINGSCost Justi%ed

• Tool life dramatically extended.

• Part {nish signi{cantly improved.

• Reduced tool wear stabilizes tolerances.

• Faster cutting speeds and feeds.

• Utilize the physical deposition (PVD)

process so the hardened alloy steel body

is not softened and retains its toughness.

TiN-Titanium Nitride

• Good coating for many materials and applications.

• Hardness: 2300 Vickers.

• Max Service Temperature: 550° C (1050° F).

• Friction Coe|cient: .65.

TiCN-Titanium Carbonitride

• Excellent where low temperatures are generated.


• Max Service Temperature: 400° C (750° F).


AlTiN-Aluminum Titanium Nitride

• Excellent in materials generating high heat.


• Max Service Temperature 750° C (1380° F).


ZrN-Zirconium Nitride

• Good in many applications in non-ferrous

materials.


• Max Service Temperature 600° C (1100° F).


• Coating to increase cutting speeds and reduce

wear.

• Matched sets.

• Coating to increase cutting speeds and reduce wear.

• Undersize shank to accommodate tool holding limitations.

OPTIONAL MODIFICATIONSSolve Problems Economically –• 30% of standard tools ordered include one or more simple modi{cations.

• Standard tool optional modi{cations eliminate need for costly special

tools.

• Optional modi{cations are available with very short lead times.

END MILL OPTIONAL MODIFICATIONS• Intermediate decimal cutting diameter.

• Closer tolerance.

• Radius corners to improve {nish.

• Intermediate width or diameters.

• Radius corners to improve {nish.

MADE IN USA


CARBIDE TIPPED REAMERSTECHNICAL INFORMATION

• The reamer is used to {nish machine a previously formed hole to an exact diameter with a smooth {nish. It should not be used to signi{cantly enlarge a hole (max. 5% – depending on material and hardness).

• Carbide tipped reamers are especially appropriate for close tolerance reaming. Because carbide is very highly resistant to wear, the reamer will produce accurate hole size and a smooth {nish far longer than high speed steel or cobalt.

• The reamer is an end cutting tool, cutting only on the chamfer’s edge at the outside diameter of the preformed hole.

The standard 45° chamfer angle provides e$ective cutting action for most materials.

• Reamer Types: Multi-Purpose – Superior performance over high speed steel and cobalt; good in a wide variety of materials Coolant Fed – Exceptional performance and tool life using material speci{c reamer technology and coolant fed capabilities; maximizes feeds & speeds

REAMER BASICS

REAMER SPECIFICATIONS• Geometry and carbide grade appropriate for material being

machined• Carbide tips brazed to tough hardened alloy steel body,

except expansion reamers which are not hardened• Polished jutes for easy chip jow• ASME/ANSI B94.2; NAS 897; USCTI• Precision ground cutting edges• “Taper Shank No.” refers to American Standard taper series (formerly Morse taper series) per ASME/ANSI B5.10

• Material speci{c reamer shanks are ground to next smallest shank diameter listed in NAS 897 if tool diameter is within .005” of shank diameter

• Expansion reamers can be expanded for regrinding as follows:

REAMER TOLERANCES• Tool diameter tolerance: Multi-purpose & Coolant fed Thru 1½” tool diameter: plus .0003”, minus .0000” Over 1½” tool diameter: plus .0004”, minus .0000” NAS897 Thru ½” tool diameter: plus .0002”, minus .0000” Over ½” tool diameter thru ¾”: plus .0003”, minus .0000” Over ¾” tool diameter: plus .0004”, minus .0000”• Closer tool diameter tolerance pricing per tool:

• Shank diameter tolerance: General purpose minus .0005”, minus .0015” NAS & Coolant fed Thru 23⁄32” tool diameter: plus .0000”, minus .0010” Over 23⁄32” tool diameter: plus .0000”, minus .0015”

Tool DiameterGuaranteed

Minimum Expansion

5⁄16” - 15⁄32” .006”

½” - 31⁄32” .010”

1” - 1½” .013”

19⁄16” - 2½” .015”

Standard

Tolerance

Modi{ed to Closer Tolerance

.0003” .0002” .0001”

.0004” $1 $3 $5

.0003” – $1 $3

.0002” – – $3

Order must be recieved by 2:00 PM CST. Does not apply to types 2431 and 2458EL. 18 pieces max per diameter. Does NOT require air shipment of the product.

Reamer Diameter Service FeeUp to 1.0000" 24 Hour $75.00Up to 1.0000" 48 Hour 50.00Over 1.0000" 48 Hour 75.00Over 1.0000" 72 Hour 50.00

REAMER EXPEDITE FEES:

MADE IN USA


CUTTING SPEEDS & FEEDS

Type of Material

Brinell

Hardness

3000 kg

Cutting Speed - SFM

Starting Range*

Feed Per Revolution

Hole Diameter - Inches

1⁄8 ¼ ½ ¾ 1 1½

Aluminum Alloys 30-150

500 kg

Drill

Ream

250-350

150-250

.003

.004

.005

.006

.008

.011

.011

.013

.014

.016

.019

.020

Aluminum Bronze Cast 40-175

500 kg

Drill

Ream

125-190

50-90

.002

.004

.005

.006

.008

.012

.010

.016

.012

.018

.016

.022

Copper Alloys/Bronze Tough 40-200

500 kg

Drill

Ream

125-190

50-90

.002

.005

.005

.006

.008

.010

.010

.012

.012

.014

.016

.017

Copper Alloys/Brass

Free Machining

10-100 Rb Drill

Ream

225-400

100-250

.002

.005

.005

.008

.008

.015

.010

.018

.012

.020

.016

.025

Magnesium 50-90

500 kg

Drill

Ream

300-400

130-390

.003

.005

.005

.010

.007

.015

.009

.017

.013

.020

.016

.025

Plastics Drill

Ream

175-450

90-250

.002

.004

.004

.005

.005

.008

.008

.012

.009

.014

.012

.016

Zinc Alloys 80-100 Drill

Ream

300-400

140-210

.003

.005

.005

.007

.009

.010

.011

.012

.014

.015

.018

.020

Cast Iron - Gray Soft 120-220 Drill

Ream

175-300

65-135

.002

.005

.005

.008

.009

.011

.014

.016

.017

.020

.019

.025

Gray Hard 220-320 Drill

Ream

130-225

45-70

.002

.004

.004

.006

.007

.009

.010

.012

.013

.014

.018

.020

Ductile Soft 140-270 Drill

Ream

150-225

50-90

.002

.004

.004

.005

.008

.010

.012

.014

.014

.017

.018

.023

Ductile Hard 270-400 Drill

Ream

-

35-60

-

.004

-

.006

-

.008

-

.010

-

.012

-

.016

Malleable Soft 110-240 Drill

Ream

125-190

60-120

.002

.004

.005

.006

.009

.011

.011

013

.012

.014

.016

.018

Malleable Hard 250-320 Drill

Ream

100-150

45-70

.002

.004

.004

.006

.007

.010

.010

.013

.012

.015

.016

.025

Nodular 120-275 Drill

Ream

200-275

40-60

.002

.004

.004

.006

.005

.010

.010

.013

.012

.015

.015

.020

Steel - Low Carbon 85-275 Drill

Ream

-

45-105

-

-

-

.010

-

.015

-

.020

-

.025

-

.030

Medium Carbon 100-500 Drill

Ream

-

20-105

-

-

-

.008

-

.012

-

.014

-

.016

-

.020

High Carbon 175-500 Drill

Ream

-

10-100

-

-

-

.006

-

.008

-

.010

-

.012

-

.016

Tool Steel 100-500 Drill

Ream

-

15-85

-

-

-

.006

-

.008

-

.010

-

.012

-

.016

Stainless - Free Mach.

300 Series

135-275 Drill

Ream

100-150

65-100

.002

.004

.004

.006

.006

.008

.008

.009

.010

.010

.014

.011

300 135-375 Drill

Ream

-

40-75

-

.003

-

.004

-

.006

-

.007

-

.008

-

.010

400 135-325 Drill

Ream

-

40-90

-

.003

-

.005

-

.007

-

.008

-

.010

-

.012

PH 150-440 Drill

Ream

-

35-70

-

.003

-

.004

-

.005

-

.007

-

.008

-

.010

High Temp. - Nickel Base 140-300 Drill

Ream

-

15-85

-

.003

-

.005

-

.006

-

.007

-

.008

-

.012

Iron Base 140-300 Drill

Ream

-

15-85

-

.003

-

.005

-

.006

-

.007

-

.008

-

.012

Cobalt Base 180-425 Drill

Ream

-

5-30

-

.003

-

.004

-

.006

-

.007

-

.008

-

.010

Titanium 110-380 Drill

Ream

-

35-45

-

.004

-

.006

-

.010

-

.011

-

.012

-

.014

*For high side of hardness range start at low side of cutting speed. Note: Reduce cutting speed and feed when drilling more than 3 diameters deep.

MADE IN USA


TOOL

DIAMETERLENGTH 118° POINT 140° POINT

FLUTEOVER-

ALL

TYPE

2670

EDP NO.

TYPE

2672

EDP NO.

BOTH

TYPES

PRICE

TYPE

2671

EDP NO.

TYPE

2673

EDP NO.

BOTH

TYPES

PRICEFRAC. DEC.

1⁄16* .0625 - 1 ½ 267004 - $22.95 267104 - $22.955⁄64* .0781 - 1 ½ 267005 - 22.95 267105 - 22.953⁄32* .0938 - 2 267006 - 25.25 267106 - 25.257⁄64* .1094 - 2 267007 - 25.25 267107 - 25.25

1⁄8* .1250 - 2 267008 - 25.95 267108 - 25.959⁄64* .1406 - 2 267009 - 25.95 267109 - 25.955⁄32* .1562 - 2 267010 - 27.35 267110 - 27.3511⁄64* .1719 - 2 3⁄8 267011 - 27.35 267111 - 27.35

3⁄16 .1875 1 ½ 3 ½ 267012 267212 24.80 267112 267312 24.8013⁄64 .2031 1 ½ 3 ½ 267013 267213 24.80 267113 267313 24.807⁄32 .2188 1 ¾ 3 ¾ 267014 267214 25.60 267114 267314 25.6015⁄64 .2344 1 ¾ 3 ¾ 267015 267215 26.45 267115 267315 26.45

¼ .2500 2 4 267016 267216 26.45 267116 267316 26.4517⁄64 .2656 2 4 267017 267217 27.95 267117 267317 27.959⁄32 .2812 2 ¼ 4 ¼ 267018 267218 27.95 267118 267318 27.9519⁄64 .2969 2 ¼ 4 ¼ 267019 267219 29.25 267119 267319 29.25

5⁄16 .3125 2 ½ 4 ½ 267020 267220 29.25 267120 267320 29.2521⁄64 .3281 2 ½ 4 ½ 267021 267221 31.15 267121 267321 31.1511⁄32 .3438 2 ¾ 4 ¾ 267022 267222 31.15 267122 267322 31.1523⁄64 .3594 2 ¾ 4 ¾ 267023 267223 33.50 267123 267323 33.50

3⁄8 .3750 3 5 267024 267224 33.50 267124 267324 33.5025⁄64 .3906 3 5 267025 267225 37.80 267125 267325 37.8013⁄32 .4062 3 5 ¼ 267026 267226 39.20 267126 267326 39.2027⁄64 .4219 3 5 ¼ 267027 267227 42.35 267127 267327 42.35

7⁄16 .4375 3 5 ½ 267028 267228 45.55 267128 267328 45.5529⁄64 .4531 3 5 ½ 267029 267229 47.75 267129 267329 47.7515⁄32 .4688 3 ¼ 5 ¾ 267030 267230 50.00 267130 267330 50.0031⁄64 .4844 3 ¼ 5 ¾ 267031 267231 60.65 267131 267331 60.65

½ .5000 3 ½ 6 267032 267232 58.65 267132 267332 58.6517⁄32 .5312 3 ½ 6 267034 267234 67.20 267134 267334 67.209⁄16 .5625 3 ½ 6 267036 267236 69.55 267136 267336 69.5519⁄32 .5938 4 7 267038 267238 73.60 267138 267338 73.60

5⁄8 .6250 4 7 267040 267240 75.85 267140 267340 75.8521⁄32 .6562 4 ½ 7 ½ 267042 267242 81.20 267142 267342 81.2011⁄16 .6875 4 ½ 7 ½ 267044 267244 83.35 267144 267344 83.3523⁄32 .7188 4 ¾ 8 267046 267246 87.35 267146 267346 87.35

¾ .7500 4 ¾ 8 267048 267248 89.75 267148 267348 89.7525⁄32 .7812 4 ¾ 8 267050 267250 173.30 267150 267350 173.3013⁄16 .8125 4 ¾ 8 267052 267252 160.90 267152 267352 160.907⁄8 .8750 4 ¾ 8 267056 267256 164.20 267156 267356 164.20

15⁄16 .9375 4 ¾ 8 267060 267260 182.90 267160 267360 182.901 1.0000 4 ¾ 8 267064 267264 194.05 267164 267364 194.05

TOOL

DIAMETER

LENGTH 118° POINT

FLUTE OVERALL TYPE 2670

NEG.

EDP NO.

TYPE 2672

POS.

EDP NO.

BOTH

TYPES

PRICEmm INCH mm INCH mm INCH

5.0 .1969 38 1 ½ 89 3 ½ 2670050 2672050 $25.355.5 .2165 45 1 ¾ 95 3 ¾ 2670055 2672055 28.206.0 .2362 51 2 102 4 2670060 2672060 28.406.5 .2559 51 2 102 4 2670065 2672065 30.05

7.0 .2756 57 2 ¼ 108 4 ¼ 2670070 2672070 30.057.5 .2953 57 2 ¼ 108 4 ¼ 2670075 2672075 31.408.0 .3150 64 2 ½ 114 4 ½ 2670080 2672080 33.908.5 .3346 70 2 ¾ 121 4 ¾ 2670085 2672085 33.90

9.0 .3543 70 2 ¾ 121 4 ¾ 2670090 2672090 36.109.5 .3740 76 3 127 5 2670095 2672095 34.25

10.0 .3937 76 3 133 5 ¼ 2670100 2672100 42.1510.5 .4134 76 3 133 5 ¼ 2670105 2672105 48.85

11.0 .4331 76 3 140 5 ½ 2670110 2672110 68.7511.5 .4528 76 3 140 5 ½ 2670115 2672115 51.4512.0 .4724 83 3 ¼ 146 5 ¾ 2670120 2672120 62.8512.5 .4921 89 3 ½ 152 6 2670125 2672125 62.85

13.0 .5118 89 3 ½ 152 6 2670130 2672130 72.1513.5 .5315 89 3 ½ 152 6 2670135 2672135 72.1514.0 .5512 89 3 ½ 152 6 2670140 2672140 74.70

METRIC DIAMETERS

TYPE 2670 & 2671 NEGATIVE EDGE

TYPE 2672 & 2673 POSITIVE EDGE

HARD STEEL DIE DRILLSCARBIDE TIPPED

USE:For drilling hardened steel in the range of 35 to 65Rockwell C.Flood the cutting point with coolant.Clear chips frequently.Light feed with steady pressure.Will cut without annealing the workpiece.

TYPE 2670 – 118º NEGATIVE EDGEDie drill - negative angle cutting edge.118º included point.Drill body diameter smaller than tip to preventgauling.

TYPE 2671 – 140º NEGATIVE EDGEDie drill - negative angle cutting edge.Same as type 2670 above, except with 140º included point - designed for drilling abrasive and toughmaterials.

TYPE 2672 – 118º POSITIVE EDGEDie drill - positive angle cutting edge.118º included point.Same as type 2670, except with thinned web, permit-ting higher feed rates with less spindle power.

TYPE 2673 – 140º POSITIVE EDGEDie drill - positive angle cutting edge.140º included point angle.Same as type 2672, except with 140º included point - designed for drilling abrasive and tough materials.

OPTIONS:Intermediate decimal and metric diameters.Special point types and angles.Undersize shank or jat on shank.

*Solid carbide full length

MADE IN USA


TOOL

DIAMETER OVER-

ALL

LENGTH

120° POINT 140 ° POINT BOTH

TYPES

PRICEFRAC. DECIMALTYPE 2674

EDP NO.

TYPE 2675

EDP NO.

3⁄32* .0938 2 267406 267506 $16.057⁄64* .1094 2 267407 267507 16.401⁄8* .1250 2 267408 267508 16.40

9⁄64* .1406 2 267409 267509 17.75

5⁄32* .1562 2 267410 267510 20.4011⁄64* .1719 3 267411 267511 21.803⁄16* .1875 3 267412 267512 25.80

13⁄64* .2031 3 267413 267513 29.05

7⁄32 .2188 3 ½ 267414 267514 CALL US15⁄64 .2344 3 ½ 267415 267515 CALL US¼ .2500 4 267416 267516 CALL US

17⁄64 .2656 4 267417 267517 CALL US

9⁄32 .2812 4 267418 267518 CALL US19⁄64 .2969 4 267419 267519 CALL US5⁄16 .3125 4 267420 267520 CALL US21⁄64 .3281 4 267421 267521 CALL US

11⁄32 .3438 4 267422 267522 CALL US23⁄64 .3594 4 267423 267523 CALL US3⁄8 .3750 4 267424 267524 CALL US

25⁄64 .3906 4 267425 267525 CALL US

13⁄32 .4062 4 267426 267526 CALL US27⁄64 .4219 4 267427 267527 CALL US7⁄16 .4375 4 ½ 267428 267528 CALL US

29⁄64 .4531 4 ½ 267429 267529 CALL US

15⁄32 .4688 4 ½ 267430 267530 CALL US31⁄64 .4844 4 ½ 267431 267531 CALL US½ .5000 5 267432 267532 CALL US

HARD STEEL DIE DRILLSCARBIDE TIPPED - 120° POINT AND 140° POINT

SELECTING THE BEST DIE DRILL FOR YOUR NEEDS –

TYPE 2674 – SPADE TYPE - 120º POINTCam relieved 120º point.Carbide tips high temperature brazed to tool steel bodies.Precision ground to insure concentricity of tip and shank body.

TYPE 2675 – SPADE TYPE - 140º POINTSame as type 2674 above, except with 140º point designed for drilling abrasive and tough materials.

USE:Used for shallow holes, approximately 2 diameters deep.The short heavy construction allows more rigid hold drilling for tough applications, where longer length drills are not needed.

*Solid carbide full length

TYPE 2670 & 2671Negative angle cutting edge die drill or strongest edge, but higher spindle power required.

TYPE 2672 & 2673Positive angle cutting edge die drill or thinned web permits feed rates with less spindle power.

MADE IN USA


TOOL DIAMETER LENGTH 118° POINT 135° POINT

FRAC. DEC.WIRE

LETTERFLUTE

OVER-

ALL

TYPE 2600

EDP NO.PRICE

TYPE 2601

EDP NO.PRICE

.0980 40* 1 2 260240 $15.25 - -

.0995 39* 1 ¼ 2 ¼ 260239 15.25 - -

.1015 38* 1 ¼ 2 ¼ 260238 15.25 - -

.1040 37* 1 ¼ 2 ¼ 260237 15.25 - -

.1065 36* 1 ¼ 2 ¼ 260236 15.25 - -7⁄64* .1094 1 ¼ 2 ¼ 260007 15.25 - -

.1100 35* 1 ¼ 2 ¼ 260235 15.25 - -

.1110 34* 1 ¼ 2 ¼ 260234 15.25 - -

.1130 33* 1 ¼ 2 ¼ 260233 15.25 - -

.1160 32 1 5⁄8 2 ¾ 260232 12.30 260332 $14.40

.1200 31 1 5⁄8 2 ¾ 260231 11.10 260331 12.951⁄8 .1250 1 5⁄8 2 ¾ 260008 11.40 260108 13.30

.1285 30 1 5⁄8 2 ¾ 260230 11.60 260330 13.45

.1360 29 1 ¾ 2 7⁄8 260229 12.05 260329 13.90

.1405 28 1 ¾ 2 7⁄8 260228 12.15 260328 14.159⁄64 .1406 1 ¾ 2 7⁄8 260009 12.30 260109 14.35

.1440 27 1 7⁄8 3 260227 12.45 260327 14.45

.1470 26 1 7⁄8 3 260226 11.55 260326 13.45

.1495 25 1 7⁄8 3 260225 11.55 260325 13.45

.1520 24 2 3 1⁄8 260224 12.45 260324 14.45

.1540 23 2 3 1⁄8 260223 12.15 260323 14.155⁄32 .1562 2 3 1⁄8 260010 12.10 260110 14.15

.1570 22 2 3 1⁄8 260222 13.40 260322 15.65

.1590 21 2 1⁄8 3 ¼ 260221 12.85 260321 14.95

.1610 20 2 1⁄8 3 ¼ 260220 13.20 260320 15.25

.1660 19 2 1⁄8 3 ¼ 260219 13.20 260319 15.25

.1695 18 2 1⁄8 3 ¼ 260218 13.20 260318 15.2511⁄64 .1719 2 1⁄8 3 ¼ 260011 13.20 260111 15.25

.1730 17 2 3⁄16 3 3⁄8 260217 13.20 260317 15.25

.1770 16 2 3⁄16 3 3⁄8 260216 12.85 260316 14.95

.1800 15 2 3⁄16 3 3⁄8 260215 13.40 260315 15.65

.1820 14 2 3⁄16 3 3⁄8 260214 12.85 260314 14.95

.1850 13 2 5⁄16 3 ½ 260213 14.15 260313 14.953⁄16 .1875 2 5⁄16 3 ½ 260012 12.85 260112 14.95

.1890 12 2 5⁄16 3 ½ 260212 14.80 260312 15.65

.1910 11 2 5⁄16 3 ½ 260211 13.65 260311 15.80

.1935 10 2 7⁄16 3 5⁄8 260210 13.40 260310 15.65

.1960 9 2 7⁄16 3 5⁄8 260209 13.65 260309 15.80

.1990 8 2 7⁄16 3 5⁄8 260208 13.65 260308 15.80

.2010 7 2 7⁄16 3 5⁄8 260207 13.65 260307 15.80

13⁄64 .2031 2 7⁄16 3 5⁄8 260013 14.10 260113 16.25.2040 6 2 ½ 3 ¾ 260206 13.95 260306 16.20.2055 5 2 ½ 3 ¾ 260205 14.10 260305 15.80.2090 4 2 ½ 3 ¾ 260204 13.95 260304 16.20

.2130 3 2 ½ 3 ¾ 260203 14.10 260303 15.807⁄32 .2188 2 ½ 3 ¾ 260014 14.10 260114 16.25

.2210 2 2 5⁄8 3 7⁄8 260202 14.70 260302 17.00

.2280 1 2 5⁄8 3 7⁄8 260201 14.40 260301 16.75

.2340 A 2 5⁄8 3 7⁄8 260401 15.95 260501 18.5015⁄64 .2344 2 5⁄8 3 7⁄8 260015 15.15 260115 17.65

.2380 B 2 ¾ 4 260402 15.95 260502 18.50

.2420 C 2 ¾ 4 260403 15.95 260503 18.50

.2460 D 2 ¾ 4 260404 15.60 260504 18.15¼ .2500 E 2 ¾ 4 260016 15.15 260116 17.65

.2570 F 2 7⁄8 4 1⁄8 260406 17.90 260506 20.80


FRAC. DEC.WIRE

LETTERFLUTE

OVER-

ALL

TYPE 2600

EDP NO.PRICE

TYPE 2601

EDP NO.PRICE

.2610 G 2 7⁄8 4 1⁄8 260407 $18.40 260507 $21.2517⁄64 .2656 2 7⁄8 4 1⁄8 260017 16.85 260117 19.30

.2660 H 2 7⁄8 4 1⁄8 260408 18.75 260508 21.75

.2720 I 2 7⁄8 4 1⁄8 260409 18.40 260509 21.25

.2770 J 2 7⁄8 4 1⁄8 260410 18.75 260510 21.75

.2810 K 2 15⁄16 4 ¼ 260411 18.75 260511 21.759⁄32 .2812 2 15⁄16 4 ¼ 260018 17.85 260118 20.70

.2900 L 2 15⁄16 4 ¼ 260412 18.75 260512 21.75

.2950 M 3 1⁄16 4 3⁄8 260413 20.65 260513 24.0519⁄64 .2969 3 1⁄16 4 3⁄8 260019 19.75 260119 22.90

.3020 N 3 1⁄16 4 3⁄8 260414 20.20 260514 23.505⁄16 .3125 3 3⁄16 4 ½ 260020 19.35 260120 22.45

.3160 O 3 3⁄16 4 ½ 260415 19.90 260515 23.00

.3230 P 3 5⁄16 4 5⁄8 260416 21.20 260516 24.5521⁄64 .3281 3 5⁄16 4 5⁄8 260021 20.50 260121 23.85

.3320 Q 3 7⁄16 4 ¾ 260417 21.60 260517 25.20

.3390 R 3 7⁄16 4 ¾ 260418 21.20 260518 24.5511⁄32 .3438 3 7⁄16 4 ¾ 260022 20.50 260122 23.85

.3480 S 3 ½ 4 7⁄8 260419 22.80 260519 26.50

.3580 T 3 ½ 4 7⁄8 260420 23.25 260520 27.10

23⁄64 .3594 3 ½ 4 7⁄8 260023 21.85 260123 25.40.3680 U 3 5⁄8 5 260421 22.35 260521 25.95

3⁄8 .3750 3 5⁄8 5 260024 21.85 260124 25.40.3770 V 3 5⁄8 5 260422 22.80 260522 26.50

.3860 W 3 ¾ 5 1⁄8 260423 25.05 260523 29.0025⁄64 .3906 3 ¾ 5 1⁄8 260025 23.75 260125 27.65

.3970 X 3 ¾ 5 1⁄8 260424 24.00 260524 27.80

.4040 Y 3 7⁄8 5 ¼ 260425 25.05 260525 29.00

13⁄32 .4062 3 7⁄8 5 ¼ 260026 23.75 260126 27.65.4130 Z 3 7⁄8 5 ¼ 260426 27.70 260526 32.05

27⁄64 .4219 3 15⁄16 5 3⁄8 260027 25.85 260127 30.007⁄16 .4375 4 1⁄16 5 ½ 260028 25.85 260128 30.00

29⁄64 .4531 4 3⁄16 5 5⁄8 260029 29.70 260129 34.4015⁄32 .4688 4 5⁄16 5 ¾ 260030 29.05 260130 33.6531⁄64 .4844 4 3⁄8 5 7⁄8 260031 32.50 260131 37.70½ .5000 4 ½ 6 260032 35.70 260132 37.70

33⁄64 .5156 4 13⁄16 6 5⁄8 260033 46.55 260133 54.0517⁄32 .5312 4 13⁄16 6 5⁄8 260034 46.55 260134 54.0535⁄64 .5469 4 13⁄16 6 5⁄8 260035 46.95 260135 54.509⁄16 .5625 4 13⁄16 6 5⁄8 260036 46.95 260136 54.50

37⁄64 .5781 4 13⁄16 6 5⁄8 260037 51.85 260137 60.2519⁄32 .5938 5 3⁄16 7 1⁄8 260038 50.40 260138 58.5539⁄64 .6094 5 3⁄16 7 1⁄8 260039 59.60 260139 69.155⁄8 .6250 5 3⁄16 7 1⁄8 260040 57.15 260140 66.25

41⁄64 .6406 5 3⁄16 7 1⁄8 260041 65.90 260141 76.5521⁄32 .6562 5 3⁄16 7 1⁄8 260042 58.10 260142 67.4043⁄64 .6719 5 5⁄8 7 5⁄8 260043 75.60 260143 87.8011⁄16 .6875 5 5⁄8 7 5⁄8 260044 59.20 260144 68.70

45⁄64 .7031 5 5⁄8 7 5⁄8 260045 69.15 260145 76.9523⁄32 .7188 5 5⁄8 7 5⁄8 260046 69.90 260146 77.7047⁄64 .7344 5 5⁄8 7 5⁄8 260047 70.30 260147 78.10¾ .7500 5 13⁄16 8 260048 71.35 260148 79.30

TANGING QUANTITY 1 2 3 4 5-7 8-14 15 OR MORE

PRICE PER TOOL $14.00 $8.00 $6.00 $5.00 $4.00 $3.00 $2.00

TWIST DRILLS - CARBIDE TIPPEDJOBBERS LENGTH

TYPE 2600 - JOBBERS LENGTH - 118° POINTFor drilling cast iron, non-ferrous metals and non-metals.

TYPE 2601 - JOBBERS LENGTH - 135° SPLIT POINTFor drilling abrasive and tough materials.

Carbide tips brazed to hardened tool steel bodies.

Smooth jutes for e$ective chip jow. Precision ground to

ensure concentricity of tip & body.

DRILL TOLERANCES: Included Lip Diameter Angle HeightDrill Diameter Plus Minus Plus Minus T.I.V.

Thru 1⁄8” .0000” .0005” 5° 5° .0020”Over 1⁄8” thru ¼” .0000” .0007” 5° 5° .0030”Over ¼”

thru ½”

.0000” .0010” 5° 5° .0040”

Over ½” thru 1” .0000” .0012” 3° 3° .0050”

Thru ½” Dia. Overall Length Tolerance +¼”, -1⁄8”

*Solid Carbide

MADE IN USA


TOOL

DIAMETER

LENGTH 118° POINT 135° POINT


EDP NO.PRICE

TYPE 2601

EDP NO.PRICE

mm INCH mm INCH mm INCH

8.9 .3504 89 3 ½ 124 4 7⁄8 2600089 $22.35 2601089 $26.809.0 .3543 89 3 ½ 124 4 7⁄8 2600090 21.85 2601090 26.809.1 .3583 89 3 ½ 124 4 7⁄8 2600091 24.20 2601091 26.809.2 .3622 92 3 5⁄8 127 5 2600092 24.20 2601092 26.80

9.3 .3661 92 3 5⁄8 127 5 2600093 24.20 2601093 26.809.4 .3701 92 3 5⁄8 127 5 2600094 24.20 2601094 26.809.5 .3740 92 3 5⁄8 127 5 2600095 23.75 2601095 26.809.6 .3780 95 3 ¾ 130 5 1⁄8 2600096 24.60 2601096 29.20

9.7 .3819 95 3 ¾ 130 5 1⁄8 2600097 24.60 2601097 29.209.8 .3858 95 3 ¾ 130 5 1⁄8 2600098 24.60 2601098 29.209.9 .3898 95 3 ¾ 130 5 1⁄8 2600099 24.60 2601099 29.20

10.0 .3937 95 3 ¾ 130 5 1⁄8 2600100 24.60 2601100 29.20

10.1 .3976 98 3 7⁄8 133 5 ¼ 2600101 29.30 2601101 30.1010.2 .4016 98 3 7⁄8 133 5 ¼ 2600102 29.30 2601102 30.1010.3 .4055 98 3 7⁄8 133 5 ¼ 2600103 29.30 2601103 30.1010.4 .4094 98 3 7⁄8 133 5 ¼ 2600104 29.30 2601104 31.60

10.5 .4134 98 3 7⁄8 133 5 ¼ 2600105 28.35 2601105 31.6010.6 .4173 100 3 15⁄16 137 5 3⁄8 2600106 32.10 2601106 32.7010.7 .4213 100 3 15⁄16 137 5 3⁄8 2600107 32.10 2601107 32.7010.8 .4252 103 4 1⁄16 140 5 ½ 2600108 32.10 2601108 32.70

10.9 .4291 103 4 1⁄16 140 5 ½ 2600109 32.10 2601109 32.7011.0 .4331 103 4 1⁄16 140 5 ½ 2600110 30.75 2601110 31.6011.1 .4370 103 4 1⁄16 140 5 ½ 2600111 35.85 2601111 36.4011.2 .4409 106 4 3⁄16 143 5 5⁄8 2600112 35.85 2601112 36.70

11.3 .4449 106 4 3⁄16 143 5 5⁄8 2600113 35.85 2601113 36.7011.4 .4488 106 4 3⁄16 143 5 5⁄8 2600114 35.85 2601114 35.6011.5 .4528 106 4 3⁄16 143 5 5⁄8 2600115 34.45 2601115 35.6011.6 .4567 110 4 5⁄16 146 5 ¾ 2600116 39.05 2601116 39.65

11.7 .4606 110 4 5⁄16 146 5 ¾ 2600117 39.05 2601117 39.6511.8 .4646 110 4 5⁄16 146 5 ¾ 2600118 39.05 2601118 39.6511.9 .4685 110 4 5⁄16 146 5 ¾ 2600119 39.05 2601119 39.6512.0 .4724 111 4 3⁄8 149 5 7⁄8 2600120 37.30 2601120 39.85

12.1 .4764 111 4 3⁄8 149 5 7⁄8 2600121 40.60 2601121 41.2012.2 .4803 111 4 3⁄8 149 5 7⁄8 2600122 40.60 2601122 41.2012.3 .4843 111 4 3⁄8 149 5 7⁄8 2600123 40.60 2601123 41.2012.4 .4882 114 4 ½ 152 6 2600124 40.60 2601124 41.20

12.5 .4921 114 4 ½ 152 6 2600125 38.70 2601125 39.8512.6 .4961 114 4 ½ 152 6 2600126 42.05 2601126 42.5512.7 .5000 114 4 ½ 152 6 260032 35.70 260132 37.7012.8 .5039 114 4 ½ 152 6 2600128 46.10 2601128 58.70

12.9 .5079 114 4 ½ 152 6 2600129 46.10 2601129 58.7013.0 .5118 114 4 ½ 152 6 2600130 46.10 2601130 58.7013.5 .5315 122 4 13⁄16 168 6 5⁄8 2600135 59.70 2601135 64.4014.0 .5512 122 4 13⁄16 168 6 5⁄8 2600140 63.30 2601140 68.25

14.5 .5709 122 4 13⁄16 168 6 5⁄8 2600145 67.85 2601145 73.3515.0 .5906 132 5 3⁄16 181 7 1⁄8 2600150 67.85 2601150 73.3515.5 .6102 132 5 3⁄16 181 7 1⁄8 2600155 68.75 2601155 74.2516.0 .6299 132 5 3⁄16 181 7 1⁄8 2600160 70.00 2601160 75.60

16.5 .6496 132 5 3⁄16 181 7 1⁄8 2600165 70.00 2601165 75.6017.0 .6693 143 5 5⁄8 194 7 5⁄8 2600170 72.70 2601170 78.5517.5 .6890 143 5 5⁄8 194 7 5⁄8 2600175 72.70 2601175 78.5518.0 .7087 143 5 5⁄8 194 7 5⁄8 2600180 73.55 2601180 79.30

18.5 .7283 143 5 5⁄8 194 7 5⁄8 2600185 73.95 2601185 79.8019.0 .7480 148 5 13⁄16 203 8 2600190 74.90 2601190 80.95

TOOL

DIAMETER



EDP NO.PRICE

TYPE 2601

EDP NO.PRICE


3.0 .1181 41 1 5⁄8 70 2 ¾ 2600030 $15.30 2601030 $15.653.1 .1220 41 1 5⁄8 70 2 ¾ 2600031 16.00 2601031 16.203.2 .1260 41 1 5⁄8 70 2 ¾ 2600032 16.00 2601032 16.203.3 .1299 44 1 ¾ 73 2 7⁄8 2600033 16.00 2601033 16.20

3.4 .1339 44 1 ¾ 73 2 7⁄8 2600034 16.00 2601034 16.203.5 .1378 44 1 ¾ 73 2 7⁄8 2600035 14.80 2601035 15.303.6 .1417 48 1 7⁄8 76 3 2600036 15.30 2601036 15.653.7 .1457 48 1 7⁄8 76 3 2600037 15.30 2601037 15.65

3.8 .1496 48 1 7⁄8 76 3 2600038 15.30 2601038 15.653.9 .1535 51 2 79 3 1⁄8 2600039 15.30 2601039 15.654.0 .1575 54 2 1⁄8 83 3 ¼ 2600040 14.40 2601040 14.804.1 .1614 54 2 1⁄8 83 3 ¼ 2600041 13.90 2601041 15.80

4.2 .1654 54 2 1⁄8 83 3 ¼ 2600042 14.80 2601042 15.804.3 .1693 54 2 1⁄8 83 3 ¼ 2600043 14.80 2601043 15.804.4 .1732 56 2 3⁄16 86 3 3⁄8 2600044 14.80 2601044 15.804.5 .1772 56 2 3⁄16 86 3 3⁄8 2600045 15.30 2601045 15.80

4.6 .1811 56 2 3⁄16 86 3 3⁄8 2600046 16.70 2601046 16.904.7 .1850 59 2 5⁄16 89 3 ½ 260213 14.15 260313 14.954.8 .1890 59 2 5⁄16 89 3 ½ 260212 14.80 260312 15.654.9 .1929 62 2 7⁄16 92 3 5⁄8 2600049 16.70 2601049 16.90

5.0 .1969 62 2 7⁄16 92 3 5⁄8 2600050 16.00 2601050 16.505.1 .2008 62 2 7⁄16 92 3 5⁄8 2600051 17.40 2601051 17.655.2 .2047 64 2 ½ 95 3 ¾ 2600052 17.40 2601052 17.655.3 .2087 64 2 ½ 95 3 ¾ 2600053 17.40 2601053 17.65

5.4 .2126 64 2 ½ 95 3 ¾ 2600054 17.40 2601054 17.655.5 .2165 64 2 ½ 95 3 ¾ 2600055 17.00 2601055 17.155.6 .2205 67 2 5⁄8 98 3 7⁄8 2600056 17.85 2601056 18.205.7 .2244 67 2 5⁄8 98 3 7⁄8 2600057 17.85 2601057 18.20

5.8 .2283 67 2 5⁄8 98 3 7⁄8 2600058 17.85 2601058 18.205.9 .2323 67 2 5⁄8 98 3 7⁄8 2600059 17.85 2601059 18.206.0 .2362 70 2 ¾ 102 4 2600060 17.65 2601060 18.656.1 .2402 70 2 ¾ 102 4 2600061 18.65 2601061 19.15

6.2 .2441 70 2 ¾ 102 4 2600062 18.65 2601062 19.156.3 .2480 70 2 ¾ 102 4 2600063 18.65 2601063 19.156.4 .2520 73 2 7⁄8 105 4 1⁄8 2600064 18.65 2601064 19.156.5 .2559 73 2 7⁄8 105 4 1⁄8 2600065 18.25 2601065 18.65

6.6 .2598 73 2 7⁄8 105 4 1⁄8 2600066 19.50 2601066 21.856.7 .2638 73 2 7⁄8 105 4 1⁄8 2600067 19.50 2601067 21.856.8 .2677 73 2 7⁄8 105 4 1⁄8 2600068 19.50 2601068 21.856.9 .2717 73 2 7⁄8 105 4 1⁄8 2600069 19.50 2601069 21.85

7.0 .2756 73 2 7⁄8 105 4 1⁄8 2600070 19.10 2601070 21.857.1 .2795 75 2 15⁄16 108 4 ¼ 2600071 20.00 2601071 21.857.2 .2835 75 2 15⁄16 108 4 ¼ 2600072 20.00 2601072 21.857.3 .2874 75 2 15⁄16 108 4 ¼ 2600073 20.00 2601073 21.85

7.4 .2913 78 3 1⁄16 111 4 3⁄8 2600074 20.00 2601074 23.657.5 .2953 78 3 1⁄16 111 4 3⁄8 2600075 20.00 2601075 23.657.6 .2992 78 3 1⁄16 111 4 3⁄8 2600076 20.95 2601076 23.657.7 .3031 81 3 3⁄16 114 4 ½ 2600077 20.95 2601077 23.65

7.8 .3071 81 3 3⁄16 114 4 ½ 2600078 20.95 2601078 23.657.9 .3110 81 3 3⁄16 114 4 ½ 2600079 20.95 2601079 23.658.0 .3150 81 3 3⁄16 114 4 ½ 2600080 20.45 2601080 23.658.1 .3189 84 3 5⁄16 117 4 5⁄8 2600081 22.35 2601081 25.20

8.2 .3228 84 3 5⁄16 117 4 5⁄8 2600082 22.35 2601082 25.208.3 .3268 84 3 5⁄16 117 4 5⁄8 2600083 22.35 2601083 25.208.4 .3307 87 3 7⁄16 121 4 ¾ 2600084 22.35 2601084 25.208.5 .3346 87 3 7⁄16 121 4 ¾ 2600085 21.40 2601085 25.20

8.6 .3386 87 3 7⁄16 121 4 ¾ 2600086 22.35 2601086 25.208.7 .3425 87 3 7⁄16 121 4 ¾ 2600087 22.35 2601087 25.208.8 .3465 89 3 ½ 124 4 7⁄8 2600088 22.35 2601088 25.20

TWIST DRILLS - CARBIDE TIPPEDMETRIC DIAMETERS - JOBBERS LENGTH

OPTIONS:Intermediate metric diameters.

Special point types and angles.

Automotive tang for use in split sleeve drill drivers.

MADE IN USA


TWIST DRILLS - CARBIDE TIPPEDJOBBERS LENGTH - TANGED


FRAC.WIRE

LETTER

DEC.

EQUIV.FLUTE

OVER-

ALL

TYPE 2690

EDP NO.PRICE

TYPE 2691

EDP NO.PRICE

1⁄8 .1250 1 5⁄8 2 ¾ 269008 $13.65 269108 $16.0530 .1285 1 5⁄8 2 ¾ 269230 14.05 269330 16.3029 .1360 1 ¾ 2 7⁄8 269229 14.50 269329 16.7528 .1405 1 ¾ 2 7⁄8 269228 14.65 269328 17.10

9⁄64 .1406 1 ¾ 2 7⁄8 269009 14.85 269109 17.4027 .1440 1 7⁄8 3 269227 15.05 269327 17.5526 .1470 1 7⁄8 3 269226 14.00 269326 16.3025 .1495 1 7⁄8 3 269225 14.00 269325 16.30

24 .1520 2 3 1⁄8 269224 15.05 269324 17.5523 .1540 2 3 1⁄8 269223 14.65 269323 17.10

5⁄32 .1562 2 3 1⁄8 269010 14.60 269110 17.1022 .1570 2 3 1⁄8 269222 16.25 269322 18.85

21 .1590 2 1⁄8 3 ¼ 269221 15.50 269321 18.0020 .1610 2 1⁄8 3 ¼ 269220 15.90 269320 18.5019 .1660 2 1⁄8 3 ¼ 269219 15.90 269319 18.5018 .1695 2 1⁄8 3 ¼ 269218 15.90 269318 18.50

11⁄64 .1719 2 1⁄8 3 ¼ 269011 15.90 269111 18.5017 .1730 2 3⁄16 3 3⁄8 269217 15.90 269317 18.5016 .1770 2 3⁄16 3 3⁄8 269216 15.50 269316 18.0015 .1800 2 3⁄16 3 3⁄8 269215 16.25 269315 18.85

14 .1820 2 3⁄16 3 3⁄8 269214 15.50 269314 18.0013 .1850 2 5⁄16 3 ½ 269213 17.10 269313 18.00

3⁄16 .1875 2 5⁄16 3 ½ 269012 15.50 269112 18.0012 .1890 2 5⁄16 3 ½ 269212 17.80 269312 18.85

11 .1910 2 5⁄16 3 ½ 269211 16.50 269311 19.0510 .1935 2 7⁄16 3 5⁄8 269210 16.25 269310 18.859 .1960 2 7⁄16 3 5⁄8 269209 16.50 269309 19.058 .1990 2 7⁄16 3 5⁄8 269208 16.50 269308 19.05

7 .2010 2 7⁄16 3 5⁄8 269207 16.50 269307 19.0513⁄64 .2031 2 7⁄16 3 5⁄8 269013 17.00 269113 19.65

6 .2040 2 ½ 3 ¾ 269206 16.80 269306 19.605 .2055 2 ½ 3 ¾ 269205 17.05 269305 19.05

4 .2090 2 ½ 3 ¾ 269204 16.80 269304 19.603 .2130 2 ½ 3 ¾ 269203 17.05 269303 19.05

7⁄32 .2188 2 ½ 3 ¾ 269014 17.00 269114 19.752 .2210 2 5⁄8 3 7⁄8 269202 17.70 269302 20.50

1 .2280 2 5⁄8 3 7⁄8 269201 17.50 269301 20.25A .2340 2 5⁄8 3 7⁄8 269401 19.30 269501 22.30

15⁄64 .2344 2 5⁄8 3 7⁄8 269015 18.30 269115 21.30B .2380 2 ¾ 4 269402 19.30 269502 22.30

C .2420 2 ¾ 4 269403 19.30 269503 22.30D .2460 2 ¾ 4 269404 18.80 269504 21.85

¼ E .2500 2 ¾ 4 269016 18.30 269116 21.30F .2570 2 7⁄8 4 1⁄8 269406 21.60 269506 25.25

G .2610 2 7⁄8 4 1⁄8 269407 22.20 269507 25.6517⁄64 .2656 2 7⁄8 4 1⁄8 269017 20.35 269117 23.25

H .2660 2 7⁄8 4 1⁄8 269408 22.65 269508 26.30I .2720 2 7⁄8 4 1⁄8 269409 22.20 269509 25.65


FRAC.WIRE

LETTER

DEC.

EQUIV.FLUTE

OVER-

ALL

TYPE 2690

EDP NO.PRICE

TYPE 2691

EDP NO.PRICE

J .2770 2 7⁄8 4 1⁄8 269410 $22.65 269510 $26.30K .2810 2 15⁄16 4 ¼ 269411 22.65 269511 26.30

9⁄32 .2812 2 15⁄16 4 ¼ 269018 21.55 269118 24.95L .2900 2 15⁄16 4 ¼ 269412 22.65 269512 26.30

M .2950 3 1⁄16 4 3⁄8 269413 24.90 269513 29.0519⁄64 .2969 3 1⁄16 4 3⁄8 269019 23.95 269119 27.65

N .3020 3 1⁄16 4 3⁄8 269414 24.40 269514 28.405⁄16 .3125 3 3⁄16 4 ½ 269020 23.35 269120 27.15

O .3160 3 3⁄16 4 ½ 269415 24.00 269515 27.70P .3230 3 5⁄16 4 5⁄8 269416 25.60 269516 29.70

21⁄64 .3281 3 5⁄16 4 5⁄8 269021 24.75 269121 28.85Q .3320 3 7⁄16 4 ¾ 269417 26.20 269517 30.35

R .3390 3 7⁄16 4 ¾ 269418 25.60 269518 29.7011⁄32 .3438 3 7⁄16 4 ¾ 269022 24.75 269122 28.85

S .3480 3 ½ 4 7⁄8 269419 27.55 269519 32.05T .3580 3 ½ 4 7⁄8 269420 28.10 269520 32.65

23⁄64 .3594 3 ½ 4 7⁄8 269023 26.40 269123 30.70U .3680 3 5⁄8 5 269421 27.10 269521 31.30

3⁄8 .3750 3 5⁄8 5 269024 26.40 269124 30.70V .3770 3 5⁄8 5 269422 27.55 269522 32.05

W .3860 3 ¾ 5 1⁄8 269423 30.25 269523 35.0025⁄64 .3906 3 ¾ 5 1⁄8 269025 28.65 269125 33.40

X .3970 3 ¾ 5 1⁄8 269424 28.95 269524 33.55Y .4040 3 7⁄8 5 ¼ 269425 30.25 269525 35.00

13⁄32 .4062 3 7⁄8 5 ¼ 269026 28.65 269126 33.40Z .4130 3 7⁄8 5 ¼ 269426 33.45 269526 38.75

27⁄64 .4219 3 15⁄16 5 3⁄8 269027 31.20 269127 36.257⁄16 .4375 4 1⁄16 5 ½ 269028 31.20 269128 36.25

29⁄64 .4531 4 3⁄16 5 5⁄8 269029 35.80 269129 41.5015⁄32 .4688 4 5⁄16 5 ¾ 269030 35.15 269130 40.6031⁄64 .4844 4 3⁄8 5 7⁄8 269031 39.20 269131 45.55½ .5000 4 ½ 6 269032 43.15 269132 45.55

33⁄64 .5156 4 13⁄16 6 5⁄8 269033 56.15 269133 65.2517⁄32 .5312 4 13⁄16 6 5⁄8 269034 56.15 269134 65.2535⁄64 .5469 4 13⁄16 6 5⁄8 269035 56.70 269135 65.909⁄16 .5625 4 13⁄16 6 5⁄8 269036 56.70 269136 65.90

37⁄64 .5781 4 13⁄16 6 5⁄8 269037 62.60 269137 72.7519⁄32 .5938 5 3⁄16 7 1⁄8 269038 60.95 269138 70.7039⁄64 .6094 5 3⁄16 7 1⁄8 269039 71.95 269139 83.555⁄8 .6250 5 3⁄16 7 1⁄8 269040 69.00 269140 80.00

41⁄64 .6406 5 3⁄16 7 1⁄8 269041 79.60 269141 92.4021⁄32 .6562 5 3⁄16 7 1⁄8 269042 70.10 269142 81.4043⁄64 .6719 5 5⁄8 7 5⁄8 269043 91.35 269143 106.0011⁄16 .6875 5 5⁄8 7 5⁄8 269044 71.50 269144 82.90

45⁄64 .7031 5 5⁄8 7 5⁄8 269045 83.60 269145 92.9523⁄32 .7188 5 5⁄8 7 5⁄8 269046 84.45 269146 93.7547⁄64 .7344 5 5⁄8 7 5⁄8 269047 84.85 269147 94.40¾ .7500 5 13⁄16 8 269048 86.30 269148 95.75

TYPE 2690 - JOBBERS LENGTH TANGED - 118° POINTTanged jobbers length - 118° standard point.

TYPE 2691 - JOBBERS LENGTH TANGED - 135° SPLIT POINTSame as Type 2690 above, except with 135° split point.

Designed for drilling tough abrasive or high tensile materials.

USE:For use in ASA split sleeve drill drivers.

OPTIONS:Modi{ed tool diameter.Modi{ed metric tool diameter.Modi{ed point and/or angle.Reduced shank diameter.

Drill tolerances (see page 14).

MADE IN USA


TWIST DRILLS - CARBIDE TIPPEDMETRIC DIAMETER - JOBBERS LENGTH - TANGED

TOOL

DIAMETER

LENGTH 118° PT. 135° PT.


EDP NO.PRICE

TYPE 2691

EDP NO.PRICE


3.2 .1260 41 1 5⁄8 70 2 ¾ 2690032 $19.40 2691032 $19.603.3 .1299 44 1 ¾ 73 2 7⁄8 2690033 19.40 2691033 19.603.4 .1339 44 1 ¾ 73 2 7⁄8 2690034 19.40 2691034 19.603.5 .1378 44 1 ¾ 73 2 7⁄8 2690035 17.80 2691035 18.50

3.6 .1417 48 1 7⁄8 76 3 2690036 18.55 2691036 18.853.7 .1457 48 1 7⁄8 76 3 2690037 18.55 2691037 18.853.8 .1496 48 1 7⁄8 76 3 2690038 18.55 2691038 18.853.9 .1535 51 2 79 3 1⁄8 2690039 18.55 2691039 18.85

4.0 .1575 54 2 1⁄8 83 3 ¼ 2690040 17.50 2691040 17.904.1 .1614 54 2 1⁄8 83 3 ¼ 2690041 16.75 2691041 19.054.2 .1654 54 2 1⁄8 83 3 ¼ 2690042 17.80 2691042 19.054.3 .1693 54 2 1⁄8 83 3 ¼ 2690043 17.80 2691043 19.05

4.4 .1732 56 2 3⁄16 86 3 3⁄8 2690044 17.80 2691044 19.054.5 .1772 56 2 3⁄16 86 3 3⁄8 2690045 18.55 2691045 19.054.6 .1811 56 2 3⁄16 86 3 3⁄8 2690046 20.20 2691046 20.404.7 .1850 59 2 5⁄16 89 3 ½ 269213 17.10 269313 18.00

4.8 .1890 59 2 5⁄16 89 3 ½ 269212 17.80 269312 18.854.9 .1929 62 2 7⁄16 92 3 5⁄8 2690049 20.20 2691049 20.405.0 .1969 62 2 7⁄16 92 3 5⁄8 2690050 19.35 2691050 19.905.1 .2008 62 2 7⁄16 92 3 5⁄8 2690051 20.95 2691051 21.30

5.2 .2047 64 2 ½ 95 3 ¾ 2690052 20.95 2691052 21.305.3 .2087 64 2 ½ 95 3 ¾ 2690053 20.95 2691053 21.305.4 .2126 64 2 ½ 95 3 ¾ 2690054 20.95 2691054 21.305.5 .2165 64 2 ½ 95 3 ¾ 2690055 20.45 2691055 20.80

5.6 .2205 67 2 5⁄8 98 3 7⁄8 2690056 21.55 2691056 22.055.7 .2244 67 2 5⁄8 98 3 7⁄8 2690057 21.55 2691057 22.055.8 .2283 67 2 5⁄8 98 3 7⁄8 2690058 21.55 2691058 22.055.9 .2323 67 2 5⁄8 98 3 7⁄8 2690059 21.55 2691059 22.05

6.0 .2362 70 2 ¾ 102 4 2690060 21.30 2691060 22.506.1 .2402 70 2 ¾ 102 4 2690061 22.50 2691061 23.156.2 .2441 70 2 ¾ 102 4 2690062 22.50 2691062 23.156.3 .2480 70 2 ¾ 102 4 2690063 22.50 2691063 23.15

6.4 .2520 73 2 7⁄8 105 4 1⁄8 2690064 22.50 2691064 23.156.5 .2559 73 2 7⁄8 105 4 1⁄8 2690065 22.15 2691065 22.506.6 .2598 73 2 7⁄8 105 4 1⁄8 2690066 23.55 2691066 26.456.7 .2638 73 2 7⁄8 105 4 1⁄8 2690067 23.55 2691067 26.45

6.8 .2677 73 2 7⁄8 105 4 1⁄8 2690068 23.55 2691068 26.456.9 .2717 73 2 7⁄8 105 4 1⁄8 2690069 23.55 2691069 26.457.0 .2756 73 2 7⁄8 105 4 1⁄8 2690070 23.05 2691070 26.457.1 .2795 75 2 15⁄16 108 4 ¼ 2690071 24.15 2691071 26.45

7.2 .2835 75 2 15⁄16 108 4 ¼ 2690072 24.15 2691072 26.457.3 .2874 75 2 15⁄16 108 4 ¼ 2690073 24.15 2691073 26.457.4 .2913 78 3 1⁄16 111 4 3⁄8 2690074 24.15 2691074 28.557.5 .2953 78 3 1⁄16 111 4 3⁄8 2690075 24.15 2691075 28.55

7.6 .2992 78 3 1⁄16 111 4 3⁄8 2690076 25.35 2691076 28.557.7 .3031 81 3 3⁄16 114 4 ½ 2690077 25.35 2691077 28.557.8 .3071 81 3 3⁄16 114 4 ½ 2690078 25.35 2691078 28.557.9 .3110 81 3 3⁄16 114 4 ½ 2690079 25.35 2691079 28.55

8.0 .3150 81 3 3⁄16 114 4 ½ 2690080 24.75 2691080 28.558.1 .3189 84 3 5⁄16 117 4 5⁄8 2690081 27.00 2691081 30.358.2 .3228 84 3 5⁄16 117 4 5⁄8 2690082 27.00 2691082 30.358.3 .3268 84 3 5⁄16 117 4 5⁄8 2690083 27.00 2691083 30.35

OPTIONS:Modi{ed tool diameter.Modi{ed metric tool diameter.Modi{ed point and/or angle.Reduced shank diameter.

Drill tolerances (see page 14).

TOOL

DIAMETER

LENGTH 118° PT. 135° PT.


EDP NO.PRICE

TYPE 2691

EDP NO.PRICE


8.4 .3307 87 3 7⁄16 121 4 ¾ 2690084 $27.00 2691084 30.358.5 .3346 87 3 7⁄16 121 4 ¾ 2690085 25.80 2691085 30.358.6 .3386 87 3 7⁄16 121 4 ¾ 2690086 27.00 2691086 30.358.7 .3425 87 3 7⁄16 121 4 ¾ 2690087 27.00 2691087 30.35

8.8 .3465 89 3 ½ 124 4 7⁄8 2690088 27.00 2691088 30.358.9 .3504 89 3 ½ 124 4 7⁄8 2690089 27.00 2691089 32.309.0 .3543 89 3 ½ 124 4 7⁄8 2690090 26.40 2691090 32.309.1 .3583 89 3 ½ 124 4 7⁄8 2690091 29.25 2691091 32.30

9.2 .3622 92 3 5⁄8 127 5 2690092 29.25 2691092 32.309.3 .3661 92 3 5⁄8 127 5 2690093 29.25 2691093 32.309.4 .3701 92 3 5⁄8 127 5 2690094 29.25 2691094 32.309.5 .3740 92 3 5⁄8 127 5 2690095 28.65 2691095 32.30

9.6 .3780 95 3 ¾ 130 5 1⁄8 2690096 29.75 2691096 35.309.7 .3819 95 3 ¾ 130 5 1⁄8 2690097 29.75 2691097 35.309.8 .3858 95 3 ¾ 130 5 1⁄8 2690098 29.75 2691098 35.309.9 .3898 95 3 ¾ 130 5 1⁄8 2690099 29.75 2691099 35.30

10.0 .3937 95 3 ¾ 130 5 1⁄8 2690100 29.75 2691100 35.3010.1 .3976 98 3 7⁄8 133 5 ¼ 2690101 35.35 2691101 36.3010.2 .4016 98 3 7⁄8 133 5 ¼ 2690102 35.35 2691102 36.3010.3 .4055 98 3 7⁄8 133 5 ¼ 2690103 35.35 2691103 36.30

10.4 .4094 98 3 7⁄8 133 5 ¼ 2690104 35.40 2691104 38.1010.5 .4134 98 3 7⁄8 133 5 ¼ 2690105 34.30 2691105 38.1010.6 .4173 100 3 15⁄16 137 5 3⁄8 2690106 38.90 2691106 39.4510.7 .4213 100 3 15⁄16 137 5 3⁄8 2690107 38.90 2691107 39.45

10.8 .4252 103 4 1⁄16 140 5 ½ 2690108 38.90 2691108 39.4510.9 .4291 103 4 1⁄16 140 5 ½ 2690109 38.90 2691109 39.4511.0 .4331 103 4 1⁄16 140 5 ½ 2690110 37.10 2691110 38.1011.1 .4370 103 4 1⁄16 140 5 ½ 2690111 43.25 2691111 43.90

11.2 .4409 106 4 3⁄16 143 5 5⁄8 2690112 43.30 2691112 44.3011.3 .4449 106 4 3⁄16 143 5 5⁄8 2690113 43.30 2691113 44.3011.4 .4488 106 4 3⁄16 143 5 5⁄8 2690114 43.25 2691114 43.0011.5 .4528 106 4 3⁄16 143 5 5⁄8 2690115 41.55 2691115 43.00

11.6 .4567 110 4 5⁄16 146 5 ¾ 2690116 47.00 2691116 47.8511.7 .4606 110 4 5⁄16 146 5 ¾ 2690117 47.00 2691117 47.8511.8 .4646 110 4 5⁄16 146 5 ¾ 2690118 47.00 2691118 47.8511.9 .4685 110 4 5⁄16 146 5 ¾ 2690119 47.00 2691119 47.85

12.0 .4724 111 4 3⁄8 149 5 7⁄8 2690120 45.05 2691120 48.1012.5 .4921 114 4 ½ 152 6 2690125 46.75 2691125 48.1013.0 .5118 114 4 ½ 152 6 2690130 55.70 2691130 70.9513.5 .5315 122 4 13⁄16 168 6 5⁄8 2690135 72.05 2691135 77.75

14.0 .5512 122 4 13⁄16 168 6 5⁄8 2690140 76.45 2691140 82.4014.5 .5709 122 4 13⁄16 168 6 5⁄8 2690145 81.95 2691145 88.6015.0 .5906 132 5 3⁄16 181 7 1⁄8 2690150 81.95 2691150 88.6015.5 .6102 132 5 3⁄16 181 7 1⁄8 2690155 83.05 2691155 89.70

16.0 .6299 132 5 3⁄16 181 7 1⁄8 2690160 84.55 2691160 91.2516.5 .6496 132 5 3⁄16 181 7 1⁄8 2690165 84.55 2691165 91.2517.0 .6693 143 5 5⁄8 194 7 5⁄8 2690170 87.75 2691170 94.9017.5 .6890 143 5 5⁄8 194 7 5⁄8 2690175 87.75 2691175 94.90

18.0 .7087 143 5 5⁄8 194 7 5⁄8 2690180 88.70 2691180 95.7518.5 .7283 143 5 5⁄8 194 7 5⁄8 2690185 89.25 2691185 96.3519.0 .7480 148 5 13⁄16 203 8 2690190 90.40 2691190 97.75

MADE IN USAMADE IN USA



FRAC.WIRE

LETTER

DECIMAL

EQUIV.FLUTE

OVER-

ALL

TYPE 2640

EDP NO.PRICE

TYPE 2641

EDP NO.PRICE

32 .1160 7⁄8 1 7⁄8 264232 $17.15 264332 $19.0531 .1200 7⁄8 1 7⁄8 264231 17.15 264331 19.05

1⁄8 .1250 7⁄8 1 7⁄8 264008 12.85 264108 13.9030 .1285 15⁄16 1 15⁄16 264230 18.15 264330 20.00

29 .1360 15⁄16 1 15⁄16 264229 18.15 264329 20.0028 .1405 15⁄16 1 15⁄16 264228 18.15 264328 20.00

9⁄64 .1406 15⁄16 1 15⁄16 264009 15.55 264109 18.3027 .1440 1 2 1⁄16 264227 18.15 264327 20.00

26 .1470 1 2 1⁄16 264226 18.15 264326 20.0025 .1495 1 2 1⁄16 264225 18.15 264325 20.0024 .1520 1 2 1⁄16 264224 18.15 264324 20.0023 .1540 1 2 1⁄16 264223 18.15 264323 20.00

5⁄32 .1562 1 2 1⁄16 264010 13.60 264110 14.8022 .1570 1 1⁄16 2 1⁄8 264222 18.15 264322 20.0021 .1590 1 1⁄16 2 1⁄8 264221 18.15 264321 20.0020 .1610 1 1⁄16 2 1⁄8 264220 21.05 264320 23.45

19 .1660 1 1⁄16 2 1⁄8 264219 21.05 264319 23.4518 .1695 1 1⁄16 2 1⁄8 264218 21.05 264318 23.45

11⁄64 .1719 1 1⁄16 2 1⁄8 264011 18.50 264111 19.9017 .1730 1 1⁄8 2 3⁄16 264217 21.50 264317 23.85

16 .1770 1 1⁄8 2 3⁄16 264216 21.50 264316 23.8515 .1800 1 1⁄8 2 3⁄16 264215 21.50 264315 23.8514 .1820 1 1⁄8 2 3⁄16 264214 21.50 264314 23.8513 .1850 1 1⁄8 2 3⁄16 264213 21.50 264313 23.85

3⁄16 .1875 1 1⁄8 2 3⁄16 264012 14.30 264112 15.7012 .1890 1 3⁄16 2 ¼ 264212 21.35 264312 23.6511 .1910 1 3⁄16 2 ¼ 264211 21.35 264311 23.6510 .1935 1 3⁄16 2 ¼ 264210 21.35 264310 23.65

9 .1960 1 3⁄16 2 ¼ 264209 21.35 264309 23.658 .1990 1 3⁄16 2 ¼ 264208 21.35 264308 23.657 .2010 1 3⁄16 2 ¼ 264207 18.75 264307 22.50

13⁄64 .2031 1 3⁄16 2 ¼ 264013 18.50 264113 19.90

6 .2040 1 ¼ 2 3⁄8 264206 21.50 264306 23.85

5 .2055 1 ¼ 2 3⁄8 264205 21.50 264305 23.854 .2090 1 ¼ 2 3⁄8 264204 21.50 264304 23.853 .2130 1 ¼ 2 3⁄8 264203 18.75 264303 22.50

7⁄32 .2188 1 ¼ 2 3⁄8 264014 15.35 264114 17.052 .2210 1 5⁄16 2 7⁄16 264202 21.35 264302 23.651 .2280 1 5⁄16 2 7⁄16 264201 18.75 264301 23.65A .2340 1 5⁄16 2 7⁄16 264401 21.35 264501 23.65

15⁄64 .2344 1 5⁄16 2 7⁄16 264015 17.05 264115 20.35B .2380 1 3⁄8 2 ½ 264402 21.35 264502 23.65C .2420 1 3⁄8 2 ½ 264403 21.35 264503 23.65D .2460 1 3⁄8 2 ½ 264404 18.75 264504 22.50

¼ E .2500 1 3⁄8 2 ½ 264016 15.65 264116 18.05F .2570 1 7⁄16 2 5⁄8 264406 21.80 264506 26.20G .2610 1 7⁄16 2 5⁄8 264407 21.80 264507 26.20

17⁄64 .2656 1 7⁄16 2 5⁄8 264017 19.05 264117 22.60

H .2660 1 ½ 2 11⁄16 264408 21.10 264508 27.40I .2720 1 ½ 2 11⁄16 264409 21.80 264509 26.20


FRAC.WIRE

LETTER

DECIMAL

EQUIV.FLUTE

OVER-

ALL

TYPE 2640

EDP NO.PRICE

TYPE 2641

EDP NO.PRICE

J .2770 1 ½ 2 11⁄16 264410 $24.65 264510 $27.40K .2810 1 ½ 2 11⁄16 264411 24.65 264511 27.40

9⁄32 .2812 1 ½ 2 11⁄16 264018 18.00 264118 20.95L .2900 1 9⁄16 2 ¾ 264412 25.45 264512 28.20

M .2950 1 9⁄16 2 ¾ 264413 25.45 264513 28.2019⁄64 .2969 1 9⁄16 2 ¾ 264019 21.80 264119 25.85

N .3020 1 5⁄8 2 13⁄16 264414 29.15 264514 32.455⁄16 .3125 1 5⁄8 2 13⁄16 264020 19.15 264120 22.30

O .3160 1 11⁄16 2 15⁄16 264415 26.85 264515 32.40P .3230 1 11⁄16 2 15⁄16 264416 30.50 264516 33.90

21⁄64 .3281 1 11⁄16 2 15⁄16 264021 23.65 264121 27.50Q .3320 1 11⁄16 3 264417 26.85 264517 32.40

R .3390 1 11⁄16 3 264418 26.85 264518 32.4011⁄32 .3438 1 11⁄16 3 264022 22.35 264122 25.85

S .3480 1 ¾ 3 1⁄16 264419 30.85 264519 34.30T .3580 1 ¾ 3 1⁄16 264420 30.85 264520 34.30

23⁄64 .3594 1 ¾ 3 1⁄16 264023 24.40 264123 28.40U .3680 1 13⁄16 3 1⁄8 264421 27.60 264521 33.20

3⁄8 .3750 1 13⁄16 3 1⁄8 264024 22.90 264124 26.55V .3770 1 7⁄8 3 ¼ 264422 35.55 264522 39.45

W .3860 1 7⁄8 3 ¼ 264423 31.40 264523 37.7525⁄64 .3906 1 7⁄8 3 ¼ 264025 27.15 264125 31.55

X .3970 1 15⁄16 3 5⁄16 264424 31.40 264524 39.45Y .4040 1 15⁄16 3 5⁄16 264425 35.55 264525 39.45

13⁄32 .4062 1 15⁄16 3 5⁄16 264026 27.15 264126 31.55Z .4130 2 3 3⁄8 264426 40.40 264526 44.95

27⁄64 .4219 2 3 3⁄8 264027 30.10 264127 34.307⁄16 .4375 2 1⁄16 3 7⁄16 264028 29.05 264128 32.20

29⁄64 .4531 2 1⁄8 3 9⁄16 264029 38.70 264129 49.7015⁄32 .4688 2 1⁄8 3 5⁄8 264030 41.30 264130 48.0031⁄64 .4844 2 3⁄16 3 11⁄16 264031 37.05 264131 47.60½ .5000 2 ¼ 3 ¾ 264032 39.55 264132 45.95

33⁄64 .5156 2 3⁄8 3 7⁄8 264033 59.00 264133 65.65

17⁄32 .5312 2 3⁄8 3 7⁄8 264034 49.25 264134 55.6035⁄64 .5469 2 ½ 4 264035 59.00 264135 65.659⁄16 .5625 2 ½ 4 264036 49.25 264136 55.60

37⁄64 .5781 2 5⁄8 4 1⁄8 264037 68.90 264137 76.6019⁄32 .5938 2 5⁄8 4 1⁄8 264038 56.50 264138 63.7039⁄64 .6094 2 ¾ 4 ¼ 264039 68.90 264139 76.605⁄8 .6250 2 ¾ 4 ¼ 264040 56.50 264140 63.70

41⁄64 .6406 2 7⁄8 4 ½ 264041 82.20 264141 91.5021⁄32 .6562 2 7⁄8 4 ½ 264042 67.90 264142 76.6543⁄64 .6719 2 7⁄8 4 5⁄8 264043 84.30 264143 93.7511⁄16 .6875 2 7⁄8 4 5⁄8 264044 69.75 264144 78.65

45⁄64 .7031 3 4 ¾ 264045 95.30 264145 105.9023⁄32 .7188 3 4 ¾ 264046 79.00 264146 91.7547⁄64 .7344 3 1⁄8 5 264047 95.40 264147 106.15¾ .7500 3 1⁄8 5 264048 79.25 264148 89.25

49⁄64 .7656 3 ¼ 5 1⁄8 264049 102.10 264149 113.60

25⁄32 .7812 3 ¼ 5 1⁄8 264050 97.90 264150 113.65

TWIST DRILLS - CARBIDE TIPPEDCNC STUB LENGTH

TYPE 2640 - STUB LENGTH - 118° POINT

Stub length - 118° standard point.

TYPE 2641 - STUB LENGTH - 135° SPLIT POINTStub length - 135° split point.

Same as type 2640 above, except with 135° split point

designed for drilling abrasive and tough materials.

USE:Excellent starting drill.

Exact location shallow drilling.



thru ½”

.0000” .0010” 5° 5° .0040”

Over ½” thru 1” .0000” .0012” 3° 3° .0050”

Over 1” .0000” .0015” 3° 3° .0060”

Often used in CNC machining centers.

Shorter length results in a very rigid and

sturdy drill.

continued next page



FRAC.WIRE

LETTER

DECIMAL

EQUIV.FLUTE

OVER-

ALL

TYPE 2640

EDP NO.PRICE

TYPE 2641

EDP NO.PRICE

51⁄64 .7969 3 3⁄8 5 ¼ 264051 $114.25 264151 $127.1013⁄16 .8125 3 3⁄8 5 ¼ 264052 98.00 264152 110.5053⁄64 .8281 3 ½ 5 3⁄8 264053 111.95 264153 124.4527⁄32 .8438 3 ½ 5 3⁄8 264054 107.25 264154 124.60

55⁄64 .8594 3 ½ 5 ½ 264055 125.35 264155 139.457⁄8 .8750 3 ½ 5 ½ 264056 107.50 264156 121.15

57⁄64 .8906 3 5⁄8 5 5⁄8 264057 120.25 264157 133.7029⁄32 .9062 3 5⁄8 5 5⁄8 264058 115.30 264158 133.75

59⁄64 .9219 3 ¾ 5 ¾ 264059 134.55 264159 149.7015⁄16 .9375 3 ¾ 5 ¾ 264060 115.40 264160 130.1561⁄64 .9531 3 7⁄8 5 7⁄8 264061 134.55 264161 149.7031⁄32 .9688 3 7⁄8 5 7⁄8 264062 121.75 264162 141.40

63⁄64 .9844 4 6 264063 142.20 264163 158.251 1.0000 4 6 264064 121.95 264164 137.60

*1 1⁄32 1.0312 4 6 ¼ 264066 178.20 264166 198.15*1 1⁄16 1.0625 4 6 ¼ 264068 152.75 264168 172.30

*1 3⁄32 1.0938 4 6 3⁄8 264070 197.75 264170 220.00*1 1⁄8 1.1250 4 6 3⁄8 264072 169.60 264172 191.15*1 5⁄32 1.1562 4 ¼ 6 5⁄8 264074 241.35 264174 268.55*1 3⁄16 1.1875 4 ¼ 6 5⁄8 264076 207.00 264176 232.00

*1 7⁄32 1.2188 4 3⁄8 6 ¾ 264078 241.35 264178 268.55*1 ¼ 1.2500 4 3⁄8 6 ¾ 264080 207.00 264180 232.00

TOOL

DIAMETER



EDP NO.PRICE

TYPE 2641

EDP NO.PRICE


3.0 .1181 22 7⁄8 48 1 7⁄8 2640030 $18.65 2641030 $20.553.1 .1220 22 7⁄8 48 1 7⁄8 2640031 18.65 2641031 20.553.2 .1260 24 15⁄16 49 1 15⁄16 2640032 18.65 2641032 20.553.3 .1299 24 15⁄16 49 1 15⁄16 2640033 18.65 2641033 20.55

3.4 .1339 24 15⁄16 49 1 15⁄16 2640034 18.65 2641034 20.553.5 .1378 24 15⁄16 49 1 15⁄16 2640035 15.95 2641035 18.303.6 .1417 25 1 52 2 1⁄16 2640036 18.65 2641036 20.553.7 .1457 25 1 52 2 1⁄16 2640037 18.65 2641037 20.55

3.8 .1496 25 1 52 2 1⁄16 2640038 18.65 2641038 20.553.9 .1535 25 1 52 2 1⁄16 2640039 18.65 2641039 20.554.0 .1575 27 1 1⁄16 54 2 1⁄8 2640040 15.95 2641040 18.354.1 .1614 27 1 1⁄16 54 2 1⁄8 2640041 22.25 2641041 24.50

4.2 .1654 27 1 1⁄16 54 2 1⁄8 2640042 22.25 2641042 24.504.3 .1693 27 1 1⁄16 54 2 1⁄8 2640043 22.25 2641043 24.504.4 .1732 29 1 1⁄8 56 2 3⁄16 2640044 22.25 2641044 24.504.5 .1772 29 1 1⁄8 56 2 3⁄16 2640045 19.05 2641045 21.85

4.6 .1811 29 1 1⁄8 56 2 3⁄16 2640046 22.25 2641046 24.504.7 .1850 29 1 1⁄8 56 2 3⁄16 264213 21.50 264313 23.854.8 .1890 30 1 3⁄16 57 2 ¼ 264212 21.35 264312 23.654.9 .1929 30 1 3⁄16 57 2 ¼ 2640049 22.25 2641049 24.50

5.0 .1969 30 1 3⁄16 57 2 ¼ 2640050 19.05 2641050 21.855.1 .2008 30 1 3⁄16 57 2 ¼ 2640051 22.25 2641051 24.505.2 .2047 32 1 ¼ 60 2 3⁄8 2640052 22.25 2641052 24.505.3 .2087 32 1 ¼ 60 2 3⁄8 2640053 22.25 2641053 24.50

5.4 .2126 32 1 ¼ 60 2 3⁄8 2640054 22.25 2641054 24.505.5 .2165 32 1 ¼ 60 2 3⁄8 2640055 19.05 2641055 21.855.6 .2205 33 1 5⁄16 62 2 7⁄16 2640056 22.25 2641056 24.505.7 .2244 33 1 5⁄16 62 2 7⁄16 2640057 22.25 2641057 24.50

5.8 .2283 33 1 5⁄16 62 2 7⁄16 2640058 22.25 2641058 24.505.9 .2323 33 1 5⁄16 62 2 7⁄16 2640059 22.25 2641059 24.506.0 .2362 35 1 3⁄8 64 2 ½ 2640060 17.80 2641060 20.356.1 .2402 35 1 3⁄8 64 2 ½ 2640061 22.95 2641061 25.45

6.2 .2441 35 1 3⁄8 64 2 ½ 2640062 22.95 2641062 25.456.3 .2480 35 1 3⁄8 64 2 ½ 2640063 22.95 2641063 25.456.4 .2520 37 1 7⁄16 67 2 5⁄8 2640064 22.95 2641064 25.456.5 .2559 37 1 7⁄16 67 2 5⁄8 2640065 19.70 2641065 22.60

TOOL

DIAMETER



EDP NO.PRICE

TYPE 2641

EDP NO.PRICE


6.6 .2598 37 1 7⁄16 67 2 5⁄8 2640066 $22.95 2641066 $25.456.7 .2638 37 1 7⁄16 67 2 5⁄8 2640067 22.95 2641067 25.456.8 .2677 38 1 ½ 68 2 11⁄16 2640068 22.95 2641068 25.456.9 .2717 38 1 ½ 68 2 11⁄16 2640069 22.95 2641069 25.45

7.0 .2756 38 1 ½ 68 2 11⁄16 2640070 19.70 2641070 22.607.1 .2795 38 1 ½ 68 2 11⁄16 2640071 22.95 2641071 25.457.2 .2835 40 1 9⁄16 70 2 ¾ 2640072 26.40 2641072 29.107.3 .2874 40 1 9⁄16 70 2 ¾ 2640073 26.40 2641073 29.10

7.4 .2913 40 1 9⁄16 70 2 ¾ 2640074 26.40 2641074 29.107.5 .2953 40 1 9⁄16 70 2 ¾ 2640075 22.65 2641075 25.857.6 .2992 41 1 5⁄8 71 2 13⁄16 2640076 26.40 2641076 29.107.7 .3031 41 1 5⁄8 71 2 13⁄16 2640077 26.40 2641077 29.10

7.8 .3071 41 1 5⁄8 71 2 13⁄16 2640078 26.40 2641078 29.107.9 .3110 41 1 5⁄8 71 2 13⁄16 2640079 26.40 2641079 29.108.0 .3150 43 1 11⁄16 75 2 15⁄16 2640080 22.65 2641080 25.858.1 .3189 43 1 11⁄16 75 2 15⁄16 2640081 28.40 2641081 31.10

8.2 .3228 43 1 11⁄16 75 2 15⁄16 2640082 28.40 2641082 31.108.3 .3268 43 1 11⁄16 75 2 15⁄16 2640083 28.40 2641083 31.108.4 .3307 43 1 11⁄16 76 3 2640084 28.40 2641084 31.108.5 .3346 43 1 11⁄16 76 3 2640085 24.35 2641085 27.50

8.6 .3386 43 1 11⁄16 76 3 2640086 28.40 2641086 31.108.7 .3425 43 1 11⁄16 76 3 2640087 28.85 2641087 31.808.8 .3465 44 1 ¾ 78 3 1⁄16 2640088 28.85 2641088 31.808.9 .3504 44 1 ¾ 78 3 1⁄16 2640089 28.85 2641089 31.80

9.0 .3543 44 1 ¾ 78 3 1⁄16 2640090 24.75 2641090 28.409.1 .3583 44 1 ¾ 78 3 1⁄16 2640091 28.85 2641091 31.809.2 .3622 46 1 13⁄16 79 3 1⁄8 2640092 28.85 2641092 31.809.3 .3661 46 1 13⁄16 79 3 1⁄8 2640093 28.85 2641093 31.80

9.4 .3701 46 1 13⁄16 79 3 1⁄8 2640094 28.85 2641094 31.809.5 .3740 46 1 13⁄16 79 3 1⁄8 2640095 24.75 2641095 28.409.6 .3780 48 1 7⁄8 83 3 ¼ 2640096 32.10 2641096 35.409.7 .3819 48 1 7⁄8 83 3 ¼ 2640097 32.10 2641097 35.40

9.8 .3858 48 1 7⁄8 83 3 ¼ 2640098 32.10 2641098 35.409.9 .3898 48 1 7⁄8 83 3 ¼ 2640099 32.10 2641099 35.40

10.0 .3937 49 1 15⁄16 84 3 5⁄16 2640100 27.55 2641100 31.5510.5 .4134 51 2 86 3 3⁄8 2640105 30.80 2641105 34.30

11.0 .4331 52 2 1⁄16 87 3 7⁄16 2640110 30.80 2641110 34.3011.5 .4528 54 2 1⁄8 90 3 9⁄16 2640115 43.35 2641115 48.0012.0 .4724 56 2 3⁄16 94 3 11⁄16 2640120 41.45 2641120 45.9512.5 .4921 57 2 ¼ 95 3 ¾ 2640125 41.45 2641125 45.95

13.0 .5118 60 2 3⁄8 98 3 7⁄8 2640130 51.20 2641130 55.6013.5 .5315 60 2 3⁄8 98 3 7⁄8 2640135 50.25 2641135 55.6014.0 .5512 64 2 ½ 102 4 2640140 50.25 2641140 55.6014.5 .5709 67 2 5⁄8 105 4 1⁄8 2640145 70.75 2641145 77.95

15.0 .5906 67 2 5⁄8 105 4 1⁄8 2640150 70.75 2641150 77.9515.5 .6102 70 2 ¾ 108 4 ¼ 2640155 79.75 2641155 87.9516.0 .6299 73 2 7⁄8 114 4 ½ 2640160 89.90 2641160 99.1016.5 .6496 73 2 7⁄8 114 4 ½ 2640165 89.90 2641165 99.10

17.0 .6693 73 2 7⁄8 117 4 5⁄8 2640170 89.90 2641170 99.1017.5 .6890 76 3 121 4 ¾ 2640175 99.15 2641175 109.2518.0 .7087 76 3 121 4 ¾ 2640180 99.15 2641180 109.2518.5 .7283 79 3 1⁄8 127 5 2640185 108.35 2641185 119.40

19.0 .7480 79 3 1⁄8 127 5 2640190 108.35 2641190 119.4019.5 .7677 83 3 ¼ 130 5 1⁄8 2640195 119.80 2641195 132.1020.0 .7874 86 3 3⁄8 133 5 ¼ 2640200 134.00 2641200 147.5520.5 .8071 86 3 3⁄8 133 5 ¼ 2640205 134.00 2641205 147.55

21.0 .8268 89 3 ½ 137 5 3⁄8 2640210 147.10 2641210 162.0021.5 .8465 89 3 ½ 140 5 ½ 2640215 147.10 2641215 162.0022.0 .8661 89 3 ½ 140 5 ½ 2640220 147.10 2641220 162.0022.5 .8858 92 3 5⁄8 143 5 5⁄8 2640225 151.35 2641225 166.70

23.0 .9055 92 3 5⁄8 143 5 5⁄8 2640230 151.35 2641230 166.7023.5 .9252 95 3 ¾ 146 5 ¾ 2640235 155.10 2641235 170.8024.0 .9449 98 3 7⁄8 149 5 7⁄8 2640240 157.95 2641240 174.1024.5 .9646 98 3 7⁄8 149 5 7⁄8 2640245 157.95 2641245 174.10

25.0 .9843 102 4 152 6 2640250 166.85 2641250 183.65

CNC STUB LENGTH DRILLS - METRIC DIAMETERS

Fractional continued from page 18

*1” Shank diameter x 2 ¼” long.

METRIC DIAMETERS

MADE IN USA

20 PHONE (800) 345-8924 FAX (800) 867-9312 www.rockrivertool.comROCK RIVER TOOL, INC.


FRAC.WIRE

LETTER

DEC.

EQUIV.FLUTE

OVER-

ALL

TYPE 2630

EDP NO.PRICE

TYPE 2631

EDP NO.PRICE

1⁄8 .1250 2 ¾ 5 1⁄8 263008 $15.30 263108 $19.0530 .1285 3 5 3⁄8 263230 21.35 263330 23.0529 .1360 3 5 3⁄8 263229 21.35 263329 23.0528 .1405 3 5 3⁄8 263228 21.35 263328 23.05

9⁄64 .1406 3 5 3⁄8 263009 17.65 263109 20.1027 .1440 3 5 3⁄8 263227 21.35 263327 23.0526 .1470 3 5 3⁄8 263226 21.35 263326 23.0525 .1495 3 5 3⁄8 263225 21.35 263325 23.05

24 .1520 3 5 3⁄8 263224 21.35 263324 23.0523 .1540 3 5 3⁄8 263223 21.35 263323 23.05

5⁄32 .1562 3 5 3⁄8 263010 16.20 263110 20.1022 .1570 3 3⁄8 5 ¾ 263222 22.15 263322 23.95

21 .1590 3 3⁄8 5 ¾ 263221 22.15 263321 23.9520 .1610 3 3⁄8 5 ¾ 263220 22.15 263320 23.9519 .1660 3 3⁄8 5 ¾ 263219 22.15 263319 23.9518 .1695 3 3⁄8 5 ¾ 263218 22.15 263318 23.95

11⁄64 .1719 3 3⁄8 5 ¾ 263011 16.50 263111 20.8517 .1730 3 3⁄8 5 ¾ 263217 22.15 263317 23.9516 .1770 3 3⁄8 5 ¾ 263216 22.15 263316 23.9515 .1800 3 3⁄8 5 ¾ 263215 22.15 263315 23.95

14 .1820 3 3⁄8 5 ¾ 263214 22.15 263314 23.9513 .1850 3 3⁄8 5 ¾ 263213 22.15 263313 23.95

3⁄16 .1875 3 3⁄8 5 ¾ 263012 16.50 263112 20.8512 .1890 3 5⁄8 6 263212 23.35 263312 25.25

11 .1910 3 5⁄8 6 263211 23.35 263311 25.2510 .1935 3 5⁄8 6 263210 23.35 263310 25.259 .1960 3 5⁄8 6 263209 23.35 263309 25.258 .1990 3 5⁄8 6 263208 23.35 263308 25.25

7 .2010 3 5⁄8 6 263207 23.35 263307 25.2513⁄64 .2031 3 5⁄8 6 263013 17.45 263113 21.95

6 .2040 3 5⁄8 6 263206 23.35 263306 25.255 .2055 3 5⁄8 6 263205 23.35 263305 25.25

4 .2090 3 5⁄8 6 263204 23.35 263304 25.253 .2130 3 5⁄8 6 263203 23.35 263303 25.25

7⁄32 .2188 3 5⁄8 6 263014 17.45 263114 21.952 .2210 3 ¾ 6 1⁄8 263202 26.45 263302 28.60

1 .2280 3 ¾ 6 1⁄8 263201 26.45 263301 28.60A .2340 3 ¾ 6 1⁄8 263401 26.45 263501 28.60

15⁄64 .2344 3 ¾ 6 1⁄8 263015 19.75 263115 24.80B .2380 3 ¾ 6 1⁄8 263402 26.45 263502 28.60

C .2420 3 ¾ 6 1⁄8 263403 26.45 263503 28.60D .2460 3 ¾ 6 1⁄8 263404 26.45 263504 28.60

¼ E .2500 3 ¾ 6 1⁄8 263016 19.75 263116 24.80F .2570 3 7⁄8 6 ¼ 263406 29.55 263506 32.00

G .2610 3 7⁄8 6 ¼ 263407 29.55 263507 32.0017⁄64 .2656 3 7⁄8 6 ¼ 263017 22.15 263117 27.80

H .2660 3 7⁄8 6 ¼ 263408 29.55 263508 32.00I .2720 3 7⁄8 6 ¼ 263409 29.55 263509 32.00

J .2770 3 7⁄8 6 ¼ 263410 29.55 263510 32.00K .2810 3 7⁄8 6 ¼ 263411 29.55 263511 32.00

9⁄32 .2812 3 7⁄8 6 ¼ 263018 22.15 263118 27.80L .2900 4 6 3⁄8 263412 32.05 263512 34.55

M .2950 4 6 3⁄8 263413 32.05 263513 34.5519⁄64 .2969 4 6 3⁄8 263019 23.85 263119 30.05

N .3020 4 6 3⁄8 263414 32.05 263514 34.55

5⁄16 .3125 4 6 3⁄8 263020 23.85 263120 30.05

O .3160 4 1⁄8 6 ½ 263415 36.35 263515 39.25P .3230 4 1⁄8 6 ½ 263416 36.35 263516 39.25

21⁄64 .3281 4 1⁄8 6 ½ 263021 26.30 263121 34.20


FRAC.WIRE

LETTER

DEC.

EQUIV.FLUTE

OVER-

ALL

TYPE 2630

EDP NO.PRICE

TYPE 2631

EDP NO.PRICE

Q .3320 4 1⁄8 6 ½ 263417 $36.35 263517 $39.25R .3390 4 1⁄8 6 ½ 263418 36.35 263518 39.25

11⁄32 .3438 4 1⁄8 6 ½ 263022 26.30 263122 34.55S .3480 4 ¼ 6 ¾ 263419 39.75 263519 43.00

T .3580 4 ¼ 6 ¾ 263420 39.75 263520 43.0023⁄64 .3594 4 ¼ 6 ¾ 263023 29.65 263123 37.40

U .3680 4 ¼ 6 ¾ 263421 39.75 263521 43.003⁄8 .3750 4 ¼ 6 ¾ 263024 29.65 263124 37.40

V .3770 4 3⁄8 7 263422 42.60 263522 46.05W .3860 4 3⁄8 7 263423 42.60 263523 46.05

25⁄64 .3906 4 3⁄8 7 263025 31.80 263125 40.10X .3970 4 3⁄8 7 263424 42.60 263524 46.05

Y .4040 4 3⁄8 7 263425 42.60 263525 46.0513⁄32 .4062 4 3⁄8 7 263026 31.80 263126 40.10

Z .4130 4 5⁄8 7 ¼ 263426 49.10 263526 53.0027⁄64 .4219 4 5⁄8 7 ¼ 263027 36.70 263127 46.05

7⁄16 .4375 4 5⁄8 7 ¼ 263028 36.70 263128 46.0529⁄64 .4531 4 ¾ 7 ½ 263029 40.40 263129 50.9515⁄32 .4688 4 ¾ 7 ½ 263030 40.40 263130 50.9531⁄64 .4844 4 ¾ 7 ¾ 263031 42.40 263131 53.35

½ .5000 4 ¾ 7 ¾ 263032 42.40 263132 53.3533⁄64 .5156 4 ¾ 8 263033 47.65 263133 59.0017⁄32 .5312 4 ¾ 8 263034 48.70 263134 59.0035⁄64 .5469 4 7⁄8 8 ¼ 263035 49.20 263135 62.00

9⁄16 .5625 4 7⁄8 8 ¼ 263036 49.20 263136 62.0037⁄64 .5781 4 7⁄8 8 ¾ 263037 51.85 263137 65.5519⁄32 .5938 4 7⁄8 8 ¾ 263038 52.80 263138 65.5539⁄64 .6094 4 7⁄8 8 ¾ 263039 59.85 263139 75.40

5⁄8 .6250 4 7⁄8 8 ¾ 263040 59.85 263140 75.4041⁄64 .6406 5 1⁄8 9 263041 62.05 263141 76.8021⁄32 .6562 5 1⁄8 9 263042 61.00 263142 73.3543⁄64 .6719 5 3⁄8 9 ¼ 263043 64.20 263143 77.65

11⁄16 .6875 5 3⁄8 9 ¼ 263044 62.00 263144 77.6545⁄64 .7031 5 5⁄8 9 ½ 263045 62.65 263145 79.0023⁄32 .7188 5 5⁄8 9 ½ 263046 63.30 263146 79.8047⁄64 .7344 5 7⁄8 9 ¾ 263047 63.65 263147 80.30

¾ .7500 5 7⁄8 9 ¾ 263048 64.65 263148 81.4549⁄64 .7656 6 9 7⁄8 263049 82.15 263149 88.7025⁄32 .7812 6 9 7⁄8 263050 82.15 263150 88.7051⁄64 .7969 6 1⁄8 10 263051 82.45 263151 89.10

13⁄16 .8125 6 1⁄8 10 263052 74.55 263152 89.1053⁄64 .8281 6 1⁄8 10 263053 82.45 263153 89.1027⁄32 .8438 6 1⁄8 10 263054 82.45 263154 89.1055⁄64 .8594 6 1⁄8 10 263055 87.30 263155 94.30

7⁄8 .8750 6 1⁄8 10 263056 78.90 263156 94.3057⁄64 .8906 6 1⁄8 10 263057 90.25 263157 97.5029⁄32 .9062 6 1⁄8 10 263058 90.25 263158 97.5059⁄64 .9219 6 1⁄8 10 ¾ 263059 91.60 263159 98.95

15⁄16 .9375 6 1⁄8 10 ¾ 263060 82.80 263160 98.9561⁄64 .9531 6 3⁄8 11 263061 95.95 263161 103.5531⁄32 .9688 6 3⁄8 11 263062 95.95 263162 103.5563⁄64 .9844 6 3⁄8 11 263063 98.95 263163 106.80

1 1.0000 6 3⁄8 11 263064 87.80 263164 106.80

TWIST DRILLS - CARBIDE TIPPEDTAPER LENGTH

TYPE 2630 - TAPER LENGTH - 118° POINTStraight shank, tanged, for use in ASA split sleeve drill

drivers. Longer ]ute and overall lengths.

TYPE 2631 - TAPER LENGTH - 135° POINTSame as type 2630 above, except with 135° split point

designed for drilling abrasive and tough materials.

MADE IN USA


TOOL

DIAMETER



EDP NO.PRICE

TYPE 2631

EDP NO.PRICE


3.2 .1260 76 3 137 5 3⁄8 2630032 $19.70 2631032 $21.253.3 .1299 76 3 137 5 3⁄8 2630033 19.70 2631033 21.253.4 .1339 76 3 137 5 3⁄8 2630034 19.70 2631034 21.253.5 .1378 76 3 137 5 3⁄8 2630035 19.10 2631035 20.80

3.6 .1417 76 3 137 5 3⁄8 2630036 19.10 2631036 20.803.7 .1457 76 3 137 5 3⁄8 2630037 19.10 2631037 20.803.8 .1496 76 3 137 5 3⁄8 2630038 19.10 2631038 20.803.9 .1535 76 3 137 5 3⁄8 2630039 19.10 2631039 20.80

4.0 .1575 86 3 3⁄8 146 5 ¾ 2630040 18.70 2631040 20.254.1 .1614 86 3 3⁄8 146 5 ¾ 2630041 19.70 2631041 21.254.2 .1654 86 3 3⁄8 146 5 ¾ 2630042 19.70 2631042 21.254.3 .1693 86 3 3⁄8 146 5 ¾ 2630043 19.70 2631043 21.25

4.4 .1732 86 3 3⁄8 146 5 ¾ 2630044 20.80 2631044 22.354.5 .1772 86 3 3⁄8 146 5 ¾ 2630045 20.80 2631045 22.354.6 .1811 86 3 3⁄8 146 5 ¾ 2630046 20.80 2631046 22.354.7 .1850 86 3 3⁄8 146 5 ¾ 263213 22.15 263313 23.95

4.8 .1890 92 3 5⁄8 152 6 263212 23.35 263312 25.254.9 .1929 92 3 5⁄8 152 6 2630049 20.80 2631049 22.355.0 .1969 92 3 5⁄8 152 6 2630050 20.70 2631050 22.355.1 .2008 92 3 5⁄8 152 6 2630051 21.55 2631051 23.30

5.2 .2047 92 3 5⁄8 152 6 2630052 18.50 2631052 23.305.3 .2087 92 3 5⁄8 152 6 2630053 21.55 2631053 23.305.4 .2126 92 3 5⁄8 152 6 2630054 21.55 2631054 23.305.5 .2165 92 3 5⁄8 152 6 2630055 22.10 2631055 23.30

5.6 .2205 95 3 ¾ 156 6 1⁄8 2630056 21.55 2631056 23.305.7 .2244 95 3 ¾ 156 6 1⁄8 2630057 21.55 2631057 23.305.8 .2283 95 3 ¾ 156 6 1⁄8 2630058 21.55 2631058 23.305.9 .2323 95 3 ¾ 156 6 1⁄8 2630059 22.45 2631059 24.35

6.0 .2362 95 3 ¾ 156 6 1⁄8 2630060 22.90 2631060 25.306.1 .2402 95 3 ¾ 156 6 1⁄8 2630061 23.95 2631061 25.806.2 .2441 95 3 ¾ 156 6 1⁄8 2630062 23.95 2631062 25.806.3 .2480 95 3 ¾ 156 6 1⁄8 2630063 23.95 2631063 25.80

6.4 .2520 98 3 7⁄8 159 6 ¼ 2630064 26.30 2631064 28.406.5 .2559 98 3 7⁄8 159 6 ¼ 2630065 23.75 2631065 28.406.6 .2598 98 3 7⁄8 159 6 ¼ 2630066 27.10 2631066 29.156.7 .2638 98 3 7⁄8 159 6 ¼ 2630067 27.10 2631067 29.15

6.8 .2677 98 3 7⁄8 159 6 ¼ 2630068 27.10 2631068 29.156.9 .2717 98 3 7⁄8 159 6 ¼ 2630069 27.10 2631069 29.157.0 .2756 98 3 7⁄8 159 6 ¼ 2630070 24.75 2631070 28.407.1 .2795 98 3 7⁄8 159 6 ¼ 2630071 27.10 2631071 29.15

7.2 .2835 102 4 162 6 3⁄8 2630072 27.10 2631072 29.157.3 .2874 102 4 162 6 3⁄8 2630073 27.10 2631073 29.157.4 .2913 102 4 162 6 3⁄8 2630074 27.10 2631074 29.157.5 .2953 102 4 162 6 3⁄8 2630075 26.25 2631075 30.70

7.6 .2992 102 4 162 6 3⁄8 2630076 28.40 2631076 30.707.7 .3031 102 4 162 6 3⁄8 2630077 28.40 2631077 30.707.8 .3071 102 4 162 6 3⁄8 2630078 28.40 2631078 30.707.9 .3110 102 4 162 6 3⁄8 2630079 28.40 2631079 30.70

8.0 .3150 105 4 1⁄8 165 6 ½ 2630080 26.60 2631080 30.708.1 .3189 105 4 1⁄8 165 6 ½ 2630081 28.40 2631081 30.708.2 .3228 105 4 1⁄8 165 6 ½ 2630082 30.25 2631082 32.608.3 .3268 105 4 1⁄8 165 6 ½ 2630083 30.25 2631083 32.60

8.4 .3307 105 4 1⁄8 165 6 ½ 2630084 30.25 2631084 32.608.5 .3346 105 4 1⁄8 165 6 ½ 2630085 27.90 2631085 34.758.6 .3386 105 4 1⁄8 165 6 ½ 2630086 32.20 2631086 34.758.7 .3425 105 4 1⁄8 165 6 ½ 2630087 32.20 2631087 34.75

TOOL

DIAMETER



EDP NO.PRICE

TYPE 2631

EDP NO.PRICE


8.8 .3465 108 4 ¼ 171 6 ¾ 2630088 $32.20 2631088 $34.758.9 .3504 108 4 ¼ 171 6 ¾ 2630089 32.20 2631089 34.759.0 .3543 108 4 ¼ 171 6 ¾ 2630090 30.15 2631090 38.159.1 .3583 108 4 ¼ 171 6 ¾ 2630091 35.30 2631091 38.15

9.2 .3622 108 4 ¼ 171 6 ¾ 2630092 35.30 2631092 38.159.3 .3661 108 4 ¼ 171 6 ¾ 2630093 35.30 2631093 38.159.4 .3701 108 4 ¼ 171 6 ¾ 2630094 35.30 2631094 38.159.5 .3740 108 4 ¼ 171 6 ¾ 2630095 30.90 2631095 38.15

9.6 .3780 111 4 3⁄8 178 7 2630096 37.05 2631096 40.009.7 .3819 111 4 3⁄8 178 7 2630097 37.05 2631097 40.009.8 .3858 111 4 3⁄8 178 7 2630098 37.05 2631098 40.009.9 .3898 111 4 3⁄8 178 7 2630099 37.05 2631099 40.00

10.0 .3937 111 4 3⁄8 178 7 2630100 32.45 2631100 40.9510.1 .3976 111 4 3⁄8 178 7 2630101 37.90 2631101 40.9510.2 .4016 111 4 3⁄8 178 7 2630102 39.55 2631102 42.7010.3 .4055 111 4 3⁄8 178 7 2630103 39.55 2631103 42.70

10.4 .4094 117 4 5⁄8 184 7 ¼ 2630104 41.30 2631104 44.5010.5 .4134 117 4 5⁄8 184 7 ¼ 2630105 36.95 2631105 44.5010.6 .4173 117 4 5⁄8 184 7 ¼ 2630106 43.25 2631106 46.7510.7 .4213 117 4 5⁄8 184 7 ¼ 2630107 43.25 2631107 46.75

10.8 .4252 117 4 5⁄8 184 7 ¼ 2630108 43.25 2631108 46.7510.9 .4291 117 4 5⁄8 184 7 ¼ 2630109 43.25 2631109 46.7511.0 .4331 117 4 5⁄8 184 7 ¼ 2630110 39.95 2631110 46.9511.5 .4528 121 4 ¾ 190 7 ½ 2630115 44.85 2631115 51.95

12.0 .4724 121 4 ¾ 197 7 ¾ 2630120 48.50 2631120 54.4512.5 .4921 121 4 ¾ 197 7 ¾ 2630125 50.25 2631125 54.4513.0 .5118 121 4 ¾ 203 8 2630130 51.50 2631130 57.4513.5 .5315 121 4 ¾ 203 8 2630135 54.70 2631135 57.45

14.0 .5512 124 4 7⁄8 210 8 ¼ 2630140 58.10 2631140 63.6514.5 .5709 124 4 7⁄8 222 8 ¾ 2630145 62.35 2631145 68.1515.0 .5906 124 4 7⁄8 222 8 ¾ 2630150 62.35 2631150 68.1515.5 .6102 124 4 7⁄8 222 8 ¾ 2630155 70.65 2631155 77.45

16.0 .6299 130 5 1⁄8 229 9 2630160 70.65 2631160 77.8516.5 .6496 130 5 1⁄8 229 9 2630165 75.45 2631165 77.8517.0 .6693 137 5 3⁄8 235 9 ¼ 2630170 73.20 2631170 80.3017.5 .6890 143 5 5⁄8 241 9 ½ 2630175 73.20 2631175 80.30

18.0 .7087 143 5 5⁄8 241 9 ½ 2630180 74.80 2631180 81.9018.5 .7283 149 5 7⁄8 248 9 ¾ 2630185 76.45 2631185 83.6019.0 .7480 149 5 7⁄8 248 9 ¾ 2630190 76.45 2631190 83.6019.5 .7677 152 6 251 9 7⁄8 2630195 92.15 2631195 99.50

20.0 .7874 156 6 1⁄8 254 10 2630200 92.55 2631200 99.9520.5 .8071 156 6 1⁄8 254 10 2630205 92.55 2631205 99.9521.0 .8268 156 6 1⁄8 254 10 2630210 92.55 2631210 99.9521.5 .8465 156 6 1⁄8 254 10 2630215 92.55 2631215 99.95

22.0 .8661 156 6 1⁄8 254 10 2630220 97.95 2631220 105.7522.5 .8858 156 6 1⁄8 254 10 2630225 101.35 2631225 109.4023.0 .9055 156 6 1⁄8 254 10 2630230 101.35 2631230 109.4023.5 .9252 156 6 1⁄8 273 10 ¾ 2630235 102.75 2631235 111.00

24.0 .9449 162 6 3⁄8 279 11 2630240 107.60 2631240 116.2524.5 .9646 162 6 3⁄8 279 11 2630245 107.60 2631245 116.2525.0 .9843 162 6 3⁄8 279 11 2630250 111.00 2631250 119.90

TWIST DRILLS - CARBIDE TIPPEDMETRIC DIAMETERS - TAPER LENGTH

USE:The longer length of these drills increases their eêctive reach

through drill bushings.DRILL TOLERANCES: Included Lip Diameter Angle HeightDrill Diameter Plus Minus Plus Minus T.I.V.


thru ½”

.0000” .0010” 5° 5° .0040”

Over ½” thru 1” .0000” .0012” 3° 3° .0050”

Thru ½” Dia. Overall Length Tolerance +¼”, -1⁄8”

MADE IN USA


TOOL

DIAMETERLENGTH

MORSE

TAPER

118° POINT 135° POINT

FRAC. DEC. FLUTEOVER-

ALL

TYPE 2660

EDP NO.PRICE

TYPE 2661

EDP NO.PRICE

¼ .2500 2 7⁄8 6 1⁄8 1 266016 $38.50 266116 $43.6517⁄64 .2656 3 6 ¼ 1 266017 CALL US 266117 CALL US9⁄32 .2812 3 6 ¼ 1 266018 CALL US 266118 CALL US19⁄64 .2969 3 1⁄8 6 3⁄8 1 266019 CALL US 266119 CALL US

5⁄16 .3125 3 1⁄8 6 3⁄8 1 266020 39.40 266120 44.6521⁄64 .3281 3 ¼ 6 ½ 1 266021 50.15 266121 56.6511⁄32 .3438 3 ¼ 6 ½ 1 266022 50.15 266122 56.6523⁄64 .3594 3 ½ 6 ¾ 1 266023 50.15 266123 56.65

3⁄8 .3750 3 ½ 6 ¾ 1 266024 50.15 266124 56.6525⁄64 .3906 3 5⁄8 7 1 266025 58.00 266125 65.7513⁄32 .4062 3 5⁄8 7 1 266026 58.00 266126 65.7527⁄64 .4219 3 7⁄8 7 ¼ 1 266027 58.00 266127 65.75

7⁄16 .4375 3 7⁄8 7 ¼ 1 266028 50.75 266128 57.5529⁄64 .4531 4 1⁄8 7 ½ 1 266029 61.65 266129 69.9015⁄32 .4688 4 1⁄8 7 ½ 1 266030 61.65 266130 69.9031⁄64 .4844 4 3⁄8 8 ¼ 2 266031 61.65 266131 69.90

½ .5000 4 3⁄8 8 ¼ 2 266032 48.50 266132 64.6533⁄64 .5156 4 5⁄8 8 ½ 2 266033 62.65 266133 75.2017⁄32 .5312 4 5⁄8 8 ½ 2 266034 51.20 266134 66.5035⁄64 .5469 4 7⁄8 8 ¾ 2 266035 63.55 266135 76.25

9⁄16 .5625 4 7⁄8 8 ¾ 2 266036 51.60 266136 67.4037⁄64 .5781 4 7⁄8 8 ¾ 2 266037 66.50 266137 79.8519⁄32 .5938 4 7⁄8 8 ¾ 2 266038 56.95 266138 74.6039⁄64 .6094 4 7⁄8 8 ¾ 2 266039 77.05 266139 92.50

5⁄8 .6250 4 7⁄8 8 ¾ 2 266040 62.75 266140 81.6541⁄64 .6406 5 1⁄8 9 2 266041 78.30 266141 93.9521⁄32 .6562 5 1⁄8 9 2 266042 61.15 266142 83.0543⁄64 .6719 5 3⁄8 9 ¼ 2 266043 79.20 266143 95.15

11⁄16 .6875 5 3⁄8 9 ¼ 2 266044 63.10 266144 84.0545⁄64 .7031 5 5⁄8 9 ½ 2 266045 81.40 266145 97.6523⁄32 .7188 5 5⁄8 9 ½ 2 266046 70.15 266146 93.6547⁄64 .7344 5 7⁄8 9 ¾ 2 266047 83.00 266147 99.65

¾ .7500 5 7⁄8 9 ¾ 2 266048 71.80 266148 90.6049⁄64 .7656 6 9 7⁄8 2 266049 88.30 266149 106.0025⁄32 .7812 6 9 7⁄8 2 266050 85.50 266150 105.9551⁄64 .7969 6 1⁄8 10 ¾ 3 266051 89.20 266151 107.05

13⁄16 .8125 6 1⁄8 10 ¾ 3 266052 86.45 266152 107.10

TOOL

DIAMETERLENGTH

MORSE

TAPER

118° POINT 135° POINT


ALL

TYPE 2660

EDP NO.PRICE

TYPE 2661

EDP NO.PRICE

53⁄64 .8281 6 1⁄8 10 ¾ 3 266053 $96.75 266153 $116.1527⁄32 .8438 6 1⁄8 10 ¾ 3 266054 88.25 266154 107.1055⁄64 .8594 6 1⁄8 10 ¾ 3 266055 CALL US 266155 CALL US7⁄8 .8750 6 1⁄8 10 ¾ 3 266056 93.85 266156 113.15

57⁄64 .8906 6 1⁄8 10 ¾ 3 266057 101.05 266157 121.1529⁄32 .9062 6 1⁄8 10 ¾ 3 266058 101.75 266158 117.9059⁄64 .9219 6 1⁄8 10 ¾ 3 266059 102.90 266159 123.4015⁄16 .9375 6 1⁄8 10 ¾ 3 266060 103.25 266160 114.10

61⁄64 .9531 6 3⁄8 11 3 266061 CALL US 266161 CALL US31⁄32 .9688 6 3⁄8 11 3 266062 107.75 266162 124.8063⁄64 .9844 6 3⁄8 11 3 266063 112.75 266163 135.30

1 1.0000 6 3⁄8 11 3 266064 101.60 266164 122.80

1 1⁄64 1.0156 6 ½ 11 1⁄8 3 266065 CALL US 266165 CALL US1 1⁄32 1.0312 6 ½ 11 1⁄8 3 266066 137.05 266166 155.401 3⁄64 1.0469 6 5⁄8 11 ¼ 3 266067 CALL US 266167 CALL US1 1⁄16 1.0625 6 5⁄8 11 ¼ 3 266068 131.65 266168 166.85

1 5⁄64 1.0781 6 7⁄8 12 ½ 4 266069 CALL US 266169 CALL US1 3⁄32 1.0938 6 7⁄8 12 ½ 4 266070 CALL US 266170 CALL US1 7⁄64 1.1094 7 1⁄8 12 ¾ 4 266071 CALL US 266171 CALL US1 1⁄8 1.1250 7 1⁄8 12 ¾ 4 266072 145.80 266172 185.05

1 9⁄64 1.1406 7 ¼ 12 7⁄8 4 266073 CALL US 266173 CALL US1 5⁄32 1.1562 7 ¼ 12 7⁄8 4 266074 CALL US 266174 CALL US1 11⁄64 1.1719 7 3⁄8 13 4 266075 CALL US 266175 CALL US1 3⁄16 1.1875 7 3⁄8 13 4 266076 167.05 266176 211.75

1 13⁄64 1.2031 7 ½ 13 1⁄8 4 266077 CALL US 266177 CALL US1 7⁄32 1.2188 7 ½ 13 1⁄8 4 266078 CALL US 266178 CALL US1 15⁄64 1.2344 7 7⁄8 13 ½ 4 266079 CALL US 266179 CALL US1 ¼ 1.2500 7 7⁄8 13 ½ 4 266080 178.75 266180 226.85

1 9⁄32 1.2812 8 ½ 14 1⁄8 4 266082 CALL US 266182 CALL US1 5⁄16 1.3125 8 5⁄8 14 ¼ 4 266084 252.85 266184 286.401 11⁄32 1.3438 8 ¾ 14 3⁄8 4 266086 CALL US 266186 CALL US1 3⁄8 1.3750 8 7⁄8 14 ½ 4 266088 283.40 266188 321.00

1 13⁄32 1.4062 9 14 5⁄8 4 266090 CALL US 266190 CALL US1 7⁄16 1.4375 9 1⁄8 14 ¾ 4 266092 CALL US 266192 CALL US1 15⁄32 1.4688 9 ¼ 14 7⁄8 4 266094 CALL US 266194 CALL US1 ½ 1.5000 9 3⁄8 15 4 266096 310.85 266196 352.25

TYPE 2660 - TAPER SHANK - 118° POINTRegular taper shank size.Heavy duty construction.

TYPE 2661 - TAPER SHANK - 135° POINTSame as type 2660 above, except with 135° split point designed for drilling abrasive and tough materials.



thru ½”

.0000” .0010” 5° 5° .0040”

Over ½” thru 1” .0000” .0012” 3° 3° .0050”

Over 1” thru 1 ½” .0000” .0015” 3° 3° .0060”

TWIST DRILLS - CARBIDE TIPPEDTAPER SHANK

MADE IN USA


AIRCRAFT EXTENSION DRILLSCARBIDE TIPPED - 135° POINT

TYPE 2610 - AIRCRAFT EXTENSION DRILLS - 6”6” overall length aircraft extension drill.

135° split point per NAS 907 speci`cations.

TYPE 2611 - AIRCRAFT EXTENSION DRILLS - 12”Same as type 2610, except 12” long.

USE:For drilling holes where reach is normally not accessible with

jobbers or taper length drills.

Feeds should be light to medium range.

Not recommended for deep hole applications.

OPTIONS:Flat on shank.

Intermediate diameters.

Undersize diameter shank.

TOOL DIAMETERFLUTE

LENGTH

6” OVERALL LENGTH 12” OVERALL LENGTH

FRAC.WIRE

LETTER

DEC.

EQUIV.

TYPE 2610

EDP NO.PRICE

TYPE 2611

EDP NO.PRICE

32 .1160 1 5⁄8 261232 $21.55 261332 $25.4531 .1200 1 5⁄8 261231 19.30 261331 22.70

1⁄8 .1250 1 5⁄8 261008 14.95 261108 17.6530 .1285 1 5⁄8 261230 20.35 261330 23.95

29 .1360 1 ¾ 261229 21.00 261329 24.7028 .1405 1 ¾ 261228 21.35 261328 25.20

9⁄64 .1406 1 ¾ 261009 16.25 261109 19.1027 .1440 1 7⁄8 261227 21.85 261327 25.65

26 .1470 1 7⁄8 261226 21.35 261326 25.2025 .1495 1 7⁄8 261225 21.35 261325 25.2024 .1520 2 261224 21.85 261324 25.6523 .1540 2 261223 21.35 261323 25.20

5⁄32 .1562 2 261010 15.90 261110 18.7522 .1570 2 261222 23.35 261322 27.5021 .1590 2 1⁄8 261221 22.65 261321 26.6520 .1610 2 1⁄8 261220 23.20 261320 27.25

19 .1660 2 1⁄8 261219 23.20 261319 27.2518 .1695 2 1⁄8 261218 23.20 261318 27.25

11⁄64 .1719 2 1⁄8 261011 17.40 261111 20.4017 .1730 2 3⁄16 261217 23.20 261317 27.25

16 .1770 2 3⁄16 261216 22.65 261316 26.6515 .1800 2 3⁄16 261215 23.35 261315 27.5014 .1820 2 3⁄16 261214 22.65 261314 26.6513 .1850 2 5⁄16 261213 22.65 261313 26.65

3⁄16 .1875 2 5⁄16 261012 16.95 261112 20.0012 .1890 2 5⁄16 261212 23.60 261312 27.7511 .1910 2 5⁄16 261211 23.85 261311 28.1510 .1935 2 7⁄16 261210 23.60 261310 27.75

9 .1960 2 7⁄16 261209 23.85 261309 28.158 .1990 2 7⁄16 261208 23.85 261308 28.157 .2010 2 7⁄16 261207 23.85 261307 28.15

13⁄64 .2031 2 7⁄16 261013 18.60 261113 21.85

6 .2040 2 ½ 261206 24.55 261306 28.905 .2055 2 ½ 261205 23.85 261305 28.154 .2090 2 ½ 261204 22.45 261304 26.453 .2130 2 ½ 261203 23.85 261303 28.15

7⁄32 .2188 2 ½ 261014 18.60 261114 21.852 .2210 2 5⁄8 261202 23.50 261302 27.601 .2280 2 5⁄8 261201 23.20 261301 27.25A .2340 2 5⁄8 261401 27.90 261501 32.75

15⁄64 .2344 2 5⁄8 261015 20.00 261115 23.55

TOOL DIAMETERFLUTE

LENGTH


FRAC.WIRE

LETTER

DEC.

EQUIV.

TYPE 2610

EDP NO.PRICE

TYPE 2611

EDP NO.PRICE

B .2380 2 ¾ 261402 $27.90 261502 $32.75C .2420 2 ¾ 261403 27.90 261503 32.75D .2460 2 ¾ 261404 27.40 261504 32.20

¼ E .2500 2 ¾ 261016 20.00 261116 23.55

F .2570 2 7⁄8 261406 28.60 261506 33.65G .2610 2 7⁄8 261407 29.25 261507 34.45

17⁄64 .2656 2 7⁄8 261017 21.35 261117 25.20H .2660 2 7⁄8 261408 29.90 261508 35.20

I .2720 2 7⁄8 261409 29.25 261509 34.45J .2770 2 7⁄8 261410 29.90 261510 35.20K .2810 2 15⁄16 261411 29.90 261511 35.20

9⁄32 .2812 2 15⁄16 261018 21.35 261118 25.20

L .2900 2 15⁄16 261412 29.90 261512 35.20M .2950 3 1⁄16 261413 32.90 261513 38.75

19⁄64 .2969 3 1⁄16 261019 23.20 261119 27.25N .3020 3 1⁄16 261414 32.20 261514 37.90

5⁄16 .3125 3 3⁄16 261020 23.20 261120 27.25O .3160 3 3⁄16 261415 30.65 261515 36.00P .3230 3 5⁄16 261416 32.60 261516 38.30

21⁄64 .3281 3 5⁄16 261021 24.65 261121 29.05

Q .3320 3 7⁄16 261417 33.45 261517 39.35R .3390 3 7⁄16 261418 32.60 261518 38.30

11⁄32 .3438 3 7⁄16 261022 24.65 261122 29.05S .3480 3 ½ 261419 35.25 261519 41.40

T .3580 3 ½ 261420 36.10 261520 42.4523⁄64 .3594 3 ½ 261023 26.30 261123 30.85

U .3680 3 5⁄8 261421 34.70 261521 40.903⁄8 .3750 3 5⁄8 261024 26.30 261124 30.85

V .3770 3 5⁄8 261422 35.25 261522 41.40W .3860 3 ¾ 261423 37.80 261523 44.45

25⁄64 .3906 3 ¾ 261025 27.00 261125 31.80X .3970 3 ¾ 261424 35.80 261524 42.15

Y .4040 3 7⁄8 261425 37.15 261525 43.6513⁄32 .4062 3 7⁄8 261026 26.60 261126 31.30

Z .4130 3 7⁄8 261426 41.90 261526 49.2527⁄64 .4219 3 15⁄16 261027 29.25 261127 34.45

7⁄16 .4375 4 1⁄16 261028 29.25 261128 34.4529⁄64 .4531 4 3⁄16 261029 33.60 261129 39.6015⁄32 .4688 4 5⁄16 261030 32.90 261130 38.7531⁄64 .4844 4 3⁄8 261031 36.95 261131 43.45

½ .5000 4 ½ 261032 36.95 261132 43.45

MADE IN USA


COBALT DRILLS FOR STEEL

TOOL DIAMETER LENGTH 135° POINT

FRAC. DEC.WIRE

LETTERFLT. OAL

TYPE 2699

EDP NO.

PRICE

EACH

.0400 60 11⁄16 1 5⁄8 26990400 $2.40

.0410 59 11⁄16 1 5⁄8 26990410 2.40

.0420 58 11⁄16 1 5⁄8 26990420 2.40

.0430 57 ¾ 1 ¾ 26990430 2.40

.0465 56 ¾ 1 ¾ 26990465 2.40

.0520 55 7⁄8 1 7⁄8 26990520 2.05

.0550 54 7⁄8 1 7⁄8 26990550 2.05

.0595 53 7⁄8 1 7⁄8 26990595 2.05

1⁄16 .0625 7⁄8 1 7⁄8 269904 1.90.0635 52 7⁄8 1 7⁄8 26990635 1.90.0670 51 1 2 26990670 1.90.0700 50 1 2 26990700 1.90

.0730 49 1 2 26990730 1.90

.0760 48 1 2 26990760 1.905⁄64 .0781 1 2 269905 1.90

.0785 47 1 2 26990785 1.90

.0810 46 1 1⁄8 2 1⁄8 26990810 1.90

.0820 45 1 1⁄8 2 1⁄8 26990820 1.90

.0860 44 1 1⁄8 2 1⁄8 26990860 1.90

.0890 43 1 ¼ 2 ¼ 26990890 1.90

.0935 42 1 ¼ 2 ¼ 26990935 1.903⁄32 .0938 1 ¼ 2 ¼ 269906 1.90

.0960 41 1 3⁄8 2 3⁄8 26990960 1.90

.0980 40 1 3⁄8 2 3⁄8 26990980 1.95

.0995 39 1 3⁄8 2 3⁄8 26990995 1.95

.1015 38 1 7⁄16 2 ½ 26991015 1.95

.1040 37 1 7⁄16 2 ½ 26991040 2.05

.1065 36 1 7⁄16 2 ½ 26991065 2.05

7⁄64 .1094 1 ½ 2 5⁄8 269907 2.00.1100 35 1 ½ 2 5⁄8 26991100 2.05.1110 34 1 ½ 2 5⁄8 26991110 2.05.1130 33 1 ½ 2 5⁄8 26991130 2.05

.1160 32 1 5⁄8 2 ¾ 26991160 2.20

.1200 31 1 5⁄8 2 ¾ 26991200 2.201⁄8 .1250 1 5⁄8 2 ¾ 269908 2.45

.1285 30 1 5⁄8 2 ¾ 26991285 2.25

.1360 29 1 ¾ 2 7⁄8 26991360 2.40

.1405 28 1 ¾ 2 7⁄8 26991405 2.45

TYPE 2699 - JOBBERS LENGTH - 135° SPLIT POINTFor drilling low and medium carbon steels, steel alloys, and

stainless steel.


FRAC. DEC.WIRE

LETTERFLT. OAL

TYPE 2699

EDP NO.

PRICE

EACH

¼ .2500 E 2 ¾ 4 269916 $4.80.2570 F 2 7⁄8 4 1⁄8 26992570 7.25.2610 G 2 7⁄8 4 1⁄8 26992610 7.50

17⁄64 .2656 2 7⁄8 4 1⁄8 269917 5.50

.2660 H 2 7⁄8 4 1⁄8 26992660 7.75

.2720 I 2 7⁄8 4 1⁄8 26992720 7.80

.2770 J 2 7⁄8 4 1⁄8 26992770 8.00

.2810 K 2 15⁄16 4 ¼ 26992810 8.15

9⁄32 .2812 2 15⁄16 4 ¼ 269918 5.75.2900 L 2 15⁄16 4 ¼ 26992900 8.80.2950 M 3 1⁄16 4 3⁄8 26992950 9.35

19⁄64 .2969 3 1⁄16 4 3⁄8 269919 7.00

.3020 N 3 1⁄16 4 3⁄8 26993020 9.355⁄16 .3125 3 3⁄16 4 ½ 269920 7.45

.3160 O 3 1⁄16 4 ½ 26993160 10.30

.3230 P 3 5⁄16 4 5⁄8 26993230 11.00

21⁄64 .3281 3 5⁄16 4 5⁄8 269921 8.25.3320 Q 3 7⁄16 4 ¾ 26993320 11.35.3390 R 3 7⁄16 4 ¾ 26993390 11.35

11⁄32 .3438 3 7⁄16 4 ¾ 269922 9.05

.3480 S 3 ½ 4 7⁄8 26993480 13.9023⁄64 .3594 3 ½ 4 7⁄8 269923 9.95

.3580 T 3 ½ 4 7⁄8 26993580 13.90

.3680 U 3 5⁄8 5 26993680 13.90

3⁄8 .3750 3 5⁄8 5 269924 10.30.3770 V 3 5⁄8 5 26993770 15.30.3860 W 3 ¾ 5 1⁄8 26993860 15.30

25⁄64 .3960 3 ¾ 5 1⁄8 269925 11.85

.3970 X 3 ¾ 5 1⁄8 26993970 15.30

.4040 Y 3 7⁄8 5 ¼ 26994040 16.2513⁄32 .4062 3 7⁄8 5 ¼ 269926 12.30

.4130 Z 3 7⁄8 5 ¼ 26994130 17.70

27⁄64 .4210 3 15⁄16 5 3⁄8 269927 13.607⁄16 .4375 4 1⁄16 5 ½ 269928 13.90

29⁄64 .4531 4 3⁄16 5 5⁄8 269929 16.7015⁄32 .4688 4 5⁄16 5 ¾ 269930 17.00

31⁄64 .4844 4 3⁄8 5 7⁄8 269931 17.55½ .5000 4 ½ 6 269932 17.70


FRAC. DEC.WIRE

LETTERFLT. OAL

TYPE 2699

EDP NO.

PRICE

EACH

9⁄64 .1406 1 ¾ 2 7⁄8 269909 $2.45.1440 27 1 7⁄8 3 26991440 2.60.1470 26 1 7⁄8 3 26991470 2.60.1495 25 1 7⁄8 3 26991495 2.60

.1520 24 2 3 1⁄8 26991520 2.95

.1540 23 2 3 1⁄8 26991540 2.955⁄32 .1562 2 3 1⁄8 269910 2.75

.1570 22 2 3 1⁄8 26991570 2.95

.1590 21 2 1⁄8 3 ¼ 26991590 2.95

.1610 20 2 1⁄8 3 ¼ 26991610 2.95

.1660 19 2 1⁄8 3 ¼ 26991660 2.95

.1695 18 2 1⁄8 3 ¼ 26991695 3.00

11⁄64 .1719 2 1⁄8 3 ¼ 269911 2.85.1730 17 2 3⁄16 3 3⁄8 26991730 3.30.1770 16 2 3⁄16 3 3⁄8 26991770 3.35.1800 15 2 3⁄16 3 3⁄8 26991800 3.60

.1820 14 2 3⁄16 3 3⁄8 26991820 3.60

.1850 13 2 5⁄16 3 ½ 26991850 3.603⁄16 .1875 2 5⁄16 3 ½ 269912 3.25

.1890 12 2 5⁄16 3 ½ 26991890 3.80

.1910 11 2 5⁄16 3 ½ 26991910 3.80

.1935 10 2 7⁄16 3 5⁄8 26991935 3.80

.1960 9 2 7⁄16 3 5⁄8 26991960 3.80

.1990 8 2 7⁄16 3 5⁄8 26991990 3.80

.2010 7 2 7⁄16 3 5⁄8 26992010 3.8013⁄64 .2031 2 7⁄16 3 5⁄8 269913 3.90

.2040 6 2 ½ 3 ¾ 26992040 4.90

.2055 5 2 ½ 3 ¾ 26992055 4.90

.2090 4 2 ½ 3 ¾ 26992090 4.90

.2130 3 2 ½ 3 ¾ 26992130 4.907⁄32 .2188 2 ½ 3 ¾ 269914 4.25

.2210 2 2 5⁄8 3 7⁄8 26992210 5.20

.2280 1 2 5⁄8 3 7⁄8 26992280 5.20

.2340 A 2 5⁄8 3 7⁄8 26992340 6.0015⁄64 .2344 2 5⁄8 3 7⁄8 269915 4.50

.2380 B 2 ¾ 4 26992380 6.90

.2420 C 2 ¾ 4 26992420 6.90

.2460 D 2 ¾ 4 26992460 6.95

NOTE:Diameters .0400” to .3020” sold in packages of 12Diameters .3125” and larger sold in packages of 6

USE:CNC machined for accuracy, improved chip evacuation and premium performance. Split point tip for improved accuracy and control - penetrates surface on contact and prevents drill bit “walking.” Hardened for high temperature applications. Engineered and manufactured for less end load pressure. Industrial grade NAS Cobalt.

Larger sizes available. Call for pricing.

MADE IN USA


TWIST DRILLS - SOLID CARBIDEJOBBERS LENGTH

TOOL DIAM. LENGTH 118° POINT

FRAC/mm

WIRE/LTRDEC. FLUTE

OVER-

ALL

TYPE 2860

EDP NO.PRICE

1⁄32 .0312 5⁄16 1 ¼ 286002 $11.9067 .0320 5⁄16 1 ¼ 28600320 11.9066 .0330 5⁄16 1 ¼ 28600330 11.9065 .0350 5⁄8 1 3⁄8 28600350 11.90

64 .0360 5⁄8 1 3⁄8 28600360 11.9063 .0370 5⁄8 1 3⁄8 28600370 11.9062 .0380 5⁄8 1 3⁄8 28600380 11.9061 .0390 5⁄8 1 3⁄8 28600390 11.90

1.0mm .0394 16 38 2860010 14.2560 .0400 ¾ 1 ½ 28600400 11.9059 .0410 ¾ 1 ½ 28600410 11.9058 .0420 ¾ 1 ½ 28600420 11.90

57 .0430 ¾ 1 ½ 28600430 11.9056 .0465 ¾ 1 ½ 28600465 11.903⁄64 .0469 ¾ 1 ½ 286003 11.9055 .0520 ¾ 1 ½ 28600520 11.90

54 .0550 ¾ 1 ½ 28600550 11.901.5mm .0591 19 38 2860015 14.20

53 .0595 ¾ 1 ½ 28600595 11.901⁄16 .0625 ¾ 1 ½ 286004 11.25

52 .0635 ¾ 1 ½ 28600635 11.9051 .0670 ¾ 1 ½ 28600670 11.9050 .0700 7⁄8 1 ¾ 28600700 12.2049 .0730 7⁄8 1 ¾ 28600730 12.50

48 .0760 7⁄8 1 ¾ 28600760 12.655⁄64 .0781 7⁄8 1 ¾ 286005 12.4547 .0785 7⁄8 1 ¾ 28600785 12.65

2.0mm .0787 22 44 2860020 15.10

46 .0810 7⁄8 1 ¾ 28600810 12.6545 .0820 7⁄8 1 ¾ 28600820 12.9544 .0860 1 2 28600860 13.4043 .0890 1 2 28600890 13.40

42 .0935 1 2 28600935 13.453⁄32 .0938 1 2 286006 12.9041 .0960 1 2 28600960 13.5040 .0980 1 2 28600980 13.60

2.5mm .0984 25 50 2860025 15.5539 .0995 1 ¼ 2 ¼ 28600995 13.8038 .1015 1 ¼ 2 ¼ 28601015 13.8037 .1040 1 ¼ 2 ¼ 28601040 13.80

36 .1065 1 ¼ 2 ¼ 28601065 13.807⁄64 .1094 1 ¼ 2 ¼ 286007 14.1035 .1100 1 ¼ 2 ¼ 28601100 14.1034 .1110 1 ¼ 2 ¼ 28601110 14.45

33 .1130 1 ¼ 2 ¼ 28601130 14.4532 .1160 1 ¼ 2 ¼ 28601160 14.80

3.0mm .1181 32 57 2860030 17.3031 .1200 1 ¼ 2 ¼ 28601200 15.051⁄8 .1250 1 ¼ 2 ¼ 286008 14.65


FRAC/mm

WIRE/LTRDEC. FLUTE

OVER-

ALL

TYPE 2860

EDP NO.PRICE

30 .1285 1 ¼ 2 ¼ 28601285 $15.6529 .1360 1 3⁄8 2 ½ 28601360 15.80

3.5mm .1378 35 63 2860035 18.2028 .1405 1 3⁄8 2 ½ 28601405 16.20

9⁄64 .1406 1 3⁄8 2 ½ 286009 17.4027 .1440 1 3⁄8 2 ½ 28601440 16.8526 .1470 1 3⁄8 2 ½ 28601470 17.1525 .1495 1 3⁄8 2 ½ 28601495 17.30

24 .1520 1 3⁄8 2 ½ 28601520 17.7523 .1540 1 3⁄8 2 ½ 28601540 18.455⁄32 .1562 1 3⁄8 2 ½ 286010 18.2022 .1570 1 3⁄8 2 ½ 28601570 19.60

4.0mm .1575 35 63 2860040 21.7521 .1590 1 3⁄8 2 ½ 28601590 19.8020 .1610 1 3⁄8 2 ½ 28601610 20.0019 .1660 1 5⁄8 2 ¾ 28601660 20.80

18 .1695 1 5⁄8 2 ¾ 28601695 20.9511⁄64 .1719 1 5⁄8 2 ¾ 286011 21.3517 .1730 1 5⁄8 2 ¾ 28601730 21.3516 .1770 1 5⁄8 2 ¾ 28601770 21.75

4.5mm .1772 41 70 2860045 24.0515 .1800 1 5⁄8 2 ¾ 28601800 21.9014 .1820 1 5⁄8 2 ¾ 28601820 21.8013 .1850 1 5⁄8 2 ¾ 28601850 22.25

3⁄16 .1875 1 5⁄8 2 ¾ 286012 21.4012 .1890 1 5⁄8 2 ¾ 28601890 22.6011 .1910 1 5⁄8 2 ¾ 28601910 23.0010 .1935 1 5⁄8 2 ¾ 28601935 23.35

9 .1960 1 ¾ 3 28601960 23.855.0mm .1969 44 75 2860050 26.80

8 .1990 1 ¾ 3 28601990 24.507 .2010 1 ¾ 3 28602010 24.75

13⁄64 .2031 1 ¾ 3 286013 26.106 .2040 1 ¾ 3 28602040 25.755 .2055 1 ¾ 3 28602055 26.104 .2090 1 ¾ 3 28602090 26.75

3 .2130 1 ¾ 3 28602130 27.505.5mm .2165 44 75 2860055 30.25

7⁄32 .2188 1 ¾ 3 286014 27.002 .2210 1 ¾ 3 28602210 28.55

1 .2280 1 ¾ 3 28602280 30.05A .2340 2 3 ¼ 28602340 33.35

15⁄64 .2344 2 3 ¼ 286015 29.956.0mm .2362 50 82 2860060 33.55

B .2380 2 3 ¼ 28602380 34.20C .2420 2 3 ¼ 28602420 34.30D .2460 2 3 ¼ 28602460 35.25E .2500 2 3 ¼ 286016 30.55

6.5mm .2559 50 82 2860065 39.80


FRAC/mm

WIRE/LTRDEC. FLUTE

OVER-

ALL

TYPE 2860

EDP NO.PRICE

F .2570 2 3 ¼ 28602570 $37.40G .2610 2 1⁄8 3 ½ 28602610 38.00

17⁄64 .2656 2 1⁄8 3 ½ 286017 33.40H .2660 2 1⁄8 3 ½ 28602660 39.05

I .2720 2 1⁄8 3 ½ 28602720 39.857.0mm .2756 54 89 2860070 44.50

J .2770 2 1⁄8 3 ½ 28602770 40.80K .2810 2 1⁄8 3 ½ 28602810 41.15

9⁄32 .2812 2 1⁄8 3 ½ 286018 36.05L .2900 2 1⁄8 3 ½ 28602900 43.15M .2950 2 3⁄8 3 ¾ 28602950 44.65

7.5mm .2953 60 95 2860075 48.60

19⁄64 .2969 2 3⁄8 3 ¾ 286019 41.00N .3020 2 3⁄8 3 ¾ 28603020 47.305⁄16 .3125 2 3⁄8 3 ¾ 286020 43.55

8.0mm .3150 60 95 2860080 49.40

O .3160 2 3⁄8 3 ¾ 28603160 50.10P .3230 2 3⁄8 3 ¾ 28603230 51.70

21⁄64 .3281 2 ½ 4 286021 47.50Q .3320 2 ½ 4 28603320 54.85

8.5mm .3346 63 100 2860085 58.60R .3390 2 ½ 4 28603390 56.60

11⁄32 .3438 2 ½ 4 286022 52.65S .3480 2 ½ 4 28603480 62.15

9.0mm .3543 70 100 2860090 66.75T .3580 2 ¾ 4 ¼ 28603580 64.40

23⁄64 .3594 2 ¾ 4 ¼ 286023 57.45U .3680 2 ¾ 4 ¼ 28603680 65.65

9.5mm .3740 70 108 2860095 69.053⁄8 .3750 2 ¾ 4 ¼ 286024 62.35V .3770 2 ¾ 4 ¼ 28603770 72.45W .3860 2 7⁄8 4 ½ 28603860 76.85

25⁄64 .3906 2 7⁄8 4 ½ 286025 70.5010.0mm .3937 73 114 2860100 82.15

X .3970 2 7⁄8 4 ½ 28603970 83.15Y .4040 2 7⁄8 4 ½ 28604040 82.50

13⁄32 .4062 2 7⁄8 4 ½ 286026 78.20Z .4130 2 7⁄8 4 ½ 28604130 91.10

10.5mm .4134 73 114 2860105 94.0027⁄64 .4219 2 7⁄8 4 ½ 286027 85.55

11.0mm .4331 73 114 2860110 104.907⁄16 .4375 2 7⁄8 4 ½ 286028 92.65

11.5mm .4528 76 120 2860115 114.5529⁄64 .4531 3 4 ¾ 286029 100.40

15⁄32 .4688 3 4 ¾ 286030 108.0512.0mm .4724 76 120 2860120 121.80

31⁄64 .4844 3 4 ¾ 286031 111.2512.5mm .4921 76 120 2860125 135.30

½ .5000 3 4 ¾ 286032 114.05

TYPE 2860 - JOBBERS LENGTH - 118° SPLIT POINTFor drilling most types of material including steel and steel alloys.

COOLANT FEEDING DRILLSSHORT LENGTH - CARBIDE TIPPED 125° SELF CENTERING POINT

TOOL

DIAMETERLENGTH

125°

4 FACET PT.PRICE

TOOL

DIAMETER

RANGE*FRAC. DECIMAL FLUTE OVERALLTYPE 2652

EDP NO.

¼ .2500 2 ½ 4 29⁄32 265216 $135.30 0.2490 - 0.253017⁄64 .2656 2 ¾ 5 5⁄32 265217 135.30 -9⁄32 .2812 2 ¾ 5 5⁄32 265218 135.30 0.2640 - 0.284019⁄64 .2969 3 3⁄16 5 19⁄32 265219 135.30 -

5⁄16 .3125 3 3⁄16 5 19⁄32 265220 135.30 0.2950 - 0.316021⁄64 .3281 3 7⁄16 5 27⁄32 265221 135.30 -11⁄32 .3438 3 7⁄16 5 27⁄32 265222 135.30 0.3260 - 0.346023⁄64 .3594 3 5⁄8 6 1⁄32 265223 136.70 -

3⁄8 .3750 3 5⁄8 6 1⁄32 265224 136.70 0.3540 - 0.377025⁄64 .3906 3 7⁄8 6 9⁄32 265225 140.15 -13⁄32 .4062 3 7⁄8 6 9⁄32 265226 140.15 0.3850 - 0.408027⁄64 .4219 4 1⁄16 6 15⁄32 265227 144.85 -

7⁄16 .4375 4 1⁄16 6 15⁄32 265228 144.85 0.4100 - 0.439029⁄64 .4531 4 5⁄16 6 23⁄32 265229 154.25 -15⁄32 .4688 4 5⁄16 6 23⁄32 265230 154.25 0.4391 - 0.472431⁄64 .4844 4 ½ 6 29⁄32 265231 158.75 -

½ .5000 4 ½ 6 29⁄32 265232 158.75 0.4725 - 0.503033⁄64 .5156 4 13⁄16 7 7⁄32 265233 165.40 -17⁄32 .5312 4 13⁄16 7 7⁄32 265234 168.20 0.5031 - 0.533035⁄64 .5469 4 13⁄16 7 7⁄32 265235 174.50 -

9⁄16 .5625 4 13⁄16 7 7⁄32 265236 177.55 0.5331 - 0.565037⁄64 .5781 5 3⁄16 7 19⁄32 265237 209.15 -19⁄32 .5938 5 3⁄16 7 19⁄32 265238 212.65 0.5651 - 0.595039⁄64 .6094 5 3⁄16 7 19⁄32 265239 209.15 -

5⁄8 .6250 5 3⁄16 7 19⁄32 265240 212.65 0.5951 - 0.627041⁄64 .6406 5 3⁄16 7 19⁄32 265241 224.20 -21⁄32 .6562 5 3⁄16 7 19⁄32 265242 224.20 0.6271 - 0.657043⁄64 .6719 5 5⁄8 8 1⁄32 265243 242.60 -

11⁄16 .6875 5 5⁄8 8 1⁄32 265244 242.90 0.6571 - 0.690045⁄64 .7031 5 5⁄8 8 1⁄32 265245 249.80 -23⁄32 .7188 5 5⁄8 8 1⁄32 265246 249.80 0.6901 - 0.722047⁄64 .7344 6 1⁄16 8 15⁄32 265247 252.30 -

¾ .7500 6 1⁄16 8 15⁄32 265248 252.30 0.7221 - 0.753049⁄64 .7656 6 1⁄16 8 9⁄16 265249 264.10 -25⁄32 .7812 6 1⁄16 8 9⁄16 265250 268.65 0.7531 - 0.784013⁄16 .8125 6 1⁄16 8 9⁄16 265252 273.15 0.7841 - 0.8160

27⁄32 .8438 6 ½ 9 265254 289.65 0.8161 - 0.84707⁄8 .8750 6 ½ 9 265256 296.60 0.8471 - 0.8780

29⁄32 .9062 6 15⁄16 9 7⁄16 265258 317.40 0.8781 - 0.909015⁄16 .9375 6 15⁄16 9 7⁄16 265260 340.95 0.9091 - 0.9390

31⁄32 .9688 6 15⁄16 9 7⁄16 265262 354.95 0.9391 - 0.97001 1.0000 7 3⁄8 9 7⁄8 265264 364.25 0.9701 - 1.0030

TYPE 2652 - SHORT LENGTHCoolant Drill - 125° four facet point, self centering. Shank diameter same size as cutting tip.Carbide tip high temperature brazed to hardened tool steel bodies with polished straight ]utes.Shank coolant hole not tapped.Tip diameter tolerance +.000”, -.001”.Two coolant passages.

USE:Excellent coolant feeding drills for use when very high performance is required.Excellent hole straightness.Exceptional hole `nish as coolant ]ushes chips out and away from cutting edges.High penetration feed rates for shorter drill opera-tion times.Proven carbide tip point geometry assures long production runs within tolerances.

OPTIONS:Modièd tool diameter.Modièd metric tool diameter.Modièd point and/or angle.Flat(s) on shank.Tanged shank.

*Contact us for modièd tool diameter prices.

MADE IN USA


COOLANT FEEDING DRILLSLONG LENGTH - CARBIDE TIPPED 125° SELF CENTERING POINT

*6.5mm tool diameter has 6.35mm shank diameter.

**Contact us for modièd tool diameter prices.

TOOL

DIAMETERLENGTH 125°

4 FACET PT.

TYPE 2650

EDP NO.

PRICE

TOOL

DIAMETER

RANGE*FRAC DEC. FLUTE OVERALL

¼ .2500 4 5⁄8 6 1⁄8 265016 $148.15 0.2490 - 0.253017⁄64 .2656 4 ¾ 6 ¼ 265017 148.15 -9⁄32 .2812 4 ¾ 6 ¼ 265018 148.15 0.2640 - 0.284019⁄64 .2969 4 7⁄8 6 3⁄8 265019 148.15 -

5⁄16 .3125 4 7⁄8 6 3⁄8 265020 148.15 0.2950 - 0.316021⁄64 .3281 5 6 ½ 265021 142.60 -11⁄32 .3438 5 6 ½ 265022 142.60 0.3260 - 0.346023⁄64 .3594 5 ¼ 6 ¾ 265023 138.95 -

3⁄8 .3750 5 ¼ 6 ¾ 265024 144.30 0.3540 - 0.377025⁄64 .3906 5 ½ 7 265025 142.60 -13⁄32 .4062 5 ½ 7 265026 142.60 0.3850 - 0.408027⁄64 .4219 5 ¾ 7 ¼ 265027 147.20 -

7⁄16 .4375 5 ¾ 7 ¼ 265028 147.20 0.4100 - 0.439029⁄64 .4531 5 ¾ 7 ½ 265029 156.50 -15⁄32 .4688 5 ¾ 7 ½ 265030 156.50 0.4391 - 0.472431⁄64 .4844 5 ¾ 7 ¾ 265031 161.15 -

½ .5000 5 ¾ 7 ¾ 265032 161.15 0.4725 - 0.503033⁄64 .5156 6 8 265033 172.90 -17⁄32 .5312 6 8 265034 172.90 0.5031 - 0.533035⁄64 .5469 6 ¼ 8 ¼ 265035 179.10 -

9⁄16 .5625 6 ¼ 8 ¼ 265036 182.15 0.5331 - 0.565037⁄64 .5781 6 ¾ 8 ¾ 265037 215.65 -19⁄32 .5938 6 ¾ 8 ¾ 265038 219.30 0.5651 - 0.595039⁄64 .6094 6 ¾ 8 ¾ 265039 215.65 -

5⁄8 .6250 6 ¾ 8 ¾ 265040 219.30 0.5951 - 0.627041⁄64 .6406 7 9 265041 227.25 -21⁄32 .6562 7 9 265042 231.20 0.6271 - 0.657043⁄64 .6719 7 ¼ 9 ¼ 265043 243.30 -

11⁄16 .6875 7 ¼ 9 ¼ 265044 247.60 0.6571 - 0.690045⁄64 .7031 7 ½ 9 ½ 265045 252.60 -23⁄32 .7188 7 ½ 9 ½ 265046 256.85 0.6901 - 0.722047⁄64 .7344 7 ¾ 9 ¾ 265047 254.70 -

¾ .7500 7 ¾ 9 ¾ 265048 259.15 0.7221 - 0.7530

49⁄64 .7656 7 7⁄8 9 7⁄8 265049 275.55 -

25⁄32 .7812 7 7⁄8 9 7⁄8 265050 275.55 0.7531 - 0.7840

13⁄16 .8125 8 10 265052 280.20 0.7841 - 0.8160

27⁄32 .8438 8 10 265054 296.60 0.8161 - 0.8470

7⁄8 .8750 8 10 265056 303.60 0.8471 - 0.8780

29⁄32 .9062 8 10 265058 336.35 0.8781 - 0.9090

15⁄16 .9375 8 ¾ 10 ¾ 265060 350.30 0.9091 - 0.9390

31⁄32 .9688 9 11 265062 353.65 0.9391 - 0.97001 1.0000 9 11 265064 353.65 0.9701 - 1.0030

TOOL

DIAMETERLENGTH 125°

4 FACET PT.

TYPE 2650

EDP NO.

PRICE

TOOL

DIAMETER

RANGE**mm INCH FLUTEOVER-

ALL

*6.5 .2559 4 5⁄8 6 1⁄8 2650065 $154.40 -7.0 .2756 4 ¾ 6 ¼ 2650070 154.40 6.706 - 7.2147.5 .2953 4 7⁄8 6 3⁄8 2650075 154.40 7.493 - 8.0268.0 .3150 4 7⁄8 6 3⁄8 2650080 154.40 -

8.5 .3346 5 6 ½ 2650085 149.10 8.280 - 8.7889.0 .3543 5 ¼ 6 ¾ 2650090 149.10 8.992 - 9.5769.5 .3740 5 ¼ 6 ¾ 2650095 149.10 -

10.0 .3937 5 ½ 7 2650100 149.10 9.779 - 10.363

10.5 .4134 5 ¾ 7 ¼ 2650105 154.40 10.414 - 11.15111.0 .4331 5 ¾ 7 ¼ 2650110 154.40 -11.5 .4528 5 ¾ 7 ½ 2650115 166.85 11.153 - 12.00012.0 .4724 5 ¾ 7 ½ 2650120 166.85 -

12.5 .4921 5 ¾ 7 ¾ 2650125 170.40 12.002 - 12.77613.0 .5118 6 8 2650130 181.00 12.779 - 13.53813.5 .5315 6 8 2650135 181.00 -14.0 .5512 6 ¼ 8 ¼ 2650140 189.90 13.541 - 14.351

14.5 .5709 6 ¾ 8 ¾ 2650145 230.65 14.354 - 15.11315.0 .5906 6 ¾ 8 ¾ 2650150 230.65 -15.5 .6102 6 ¾ 8 ¾ 2650155 230.65 15.116 - 15.92616.0 .6299 7 9 2650160 236.00 15.928 - 16.688

16.5 .6496 7 9 2650165 236.00 -17.0 .6693 7 ¼ 9 ¼ 2650170 251.95 16.690 - 17.52617.5 .6890 7 ¼ 9 ¼ 2650175 251.95 -18.0 .7087 7 ½ 9 ½ 2650180 264.45 17.529 - 18.339

18.5 .7283 7 ¾ 9 ¾ 2650185 266.15 18.341 - 19.12619.0 .7480 7 ¾ 9 ¾ 2650190 266.15 -19.5 .7677 7 7⁄8 9 7⁄8 2650195 282.20 19.129 - 19.91420.0 .7874 8 10 2650200 285.80 19.916 - 20.726

20.5 .8071 8 10 2650205 285.80 -21.0 .8268 8 10 2650210 301.70 20.729 - 21.51421.5 .8465 8 10 2650215 301.70 -22.0 .8661 8 10 2650220 308.80 21.516 - 22.301

22.5 .8858 8 10 2650225 340.75 22.304 - 23.08923.0 .9055 8 10 2650230 340.75 -23.5 .9252 8 ¾ 10 ¾ 2650235 353.15 23.091 - 23.85124.0 .9449 9 11 2650240 367.35 23.853 - 24.638

24.5 .9646 9 11 2650245 367.35 -25.0 .9843 9 11 2650250 367.35 24.641 - 25.476

MADE IN USA


TYPE 2650 - LONG LENGTHCoolant Drill - 125° four facet point, self centering. Shank diameter same size as cutting tip.Same as type 2652 except longer overall and ]ute lengths.Where possible, use shorter length, type 2652, for greater rigidity.Carbide tip high temperature brazed to hardened tool steel bodies with polished straight ]utes.Shank coolant hole not tapped.Tip diameter tolerance +.000”, - .001”.Two coolant passages.



MADE IN USA


COOLANT FEEDING DRILLS SHORT LENGTH AND EXTRA LONG LENGTH - CARBIDE TIPPED

TOOL

DIAMETER

LENGTH TYPE

2652

METRIC

EDP NO.

METRIC

PRICE

TOOL

DIAMETER

RANGE*

FLUTE OVERALL


**6.5 .2559 64 2 ½ 125 4 29⁄32 2652065 $174.75 -7.0 .2756 70 2 ¾ 131 5 5⁄32 2652070 174.75 6.706 - 7.2147.5 .2953 81 3 3⁄16 142 5 19⁄32 2652075 174.75 7.493 - 8.0268.0 .3150 81 3 3⁄16 142 5 19⁄32 2652080 174.75 -

8.5 .3346 87 3 7⁄16 148 5 27⁄32 2652085 168.75 8.280 - 8.7889.0 .3543 92 3 5⁄8 153 6 1⁄32 2652090 168.75 8.992 - 9.5769.5 .3740 92 3 5⁄8 153 6 1⁄32 2652095 168.75 -

10.0 .3937 98 3 7⁄8 159 6 9⁄32 2652100 168.75 9.779 - 10.363

10.5 .4134 103 4 1⁄16 164 6 15⁄32 2652105 174.75 10.414 - 11.15111.0 .4331 103 4 1⁄16 164 6 15⁄32 2652110 174.75 -11.5 .4528 109 4 5⁄16 171 6 23⁄32 2652115 188.90 11.153 - 12.00012.0 .4724 109 4 5⁄16 171 6 23⁄32 2652120 188.90 -

12.5 .4921 114 4 ½ 175 6 29⁄32 2652125 192.90 12.002 - 12.77613.0 .5118 122 4 13⁄16 183 7 7⁄32 2652130 204.90 12.779 - 13.53813.5 .5315 122 4 13⁄16 183 7 7⁄32 2652135 204.90 -14.0 .5512 122 4 13⁄16 183 7 7⁄32 2652140 214.95 13.541 - 14.351

14.5 .5709 131 5 3⁄16 193 7 19⁄32 2652145 261.15 14.354 - 15.11315.0 .5906 131 5 3⁄16 193 7 19⁄32 2652150 261.15 -15.5 .6102 131 5 3⁄16 193 7 19⁄32 2652155 261.15 15.116 - 15.92616.0 .6299 131 5 3⁄16 193 7 19⁄32 2652160 267.15 15.928 - 16.688

TOOL

DIAMETER

LENGTH TYPE

2652

METRIC

EDP NO.

METRIC

PRICE

TOOL

DIAMETER

RANGE*

FLUTE OVERALL


16.5 .6496 131 5 3⁄16 193 7 19⁄32 2652165 $267.15 -17.0 .6693 143 5 5⁄8 204 8 1⁄32 2652170 285.25 16.690 - 17.52617.5 .6890 143 5 5⁄8 204 8 1⁄32 2652175 285.25 -18.0 .7087 143 5 5⁄8 204 8 1⁄32 2652180 299.40 17.529 - 18.339

18.5 .7283 154 6 1⁄16 215 8 15⁄32 2652185 301.30 18.341 - 19.12619.0 .7480 154 6 1⁄16 215 8 15⁄32 2652190 301.30 -19.5 .7677 154 6 1⁄16 217 8 9⁄16 2652195 319.50 19.129 - 19.91420.0 .7874 154 6 1⁄16 217 8 9⁄16 2652200 323.50 19.916 - 20.726

20.5 .8071 154 6 1⁄16 217 8 9⁄16 2652205 323.50 -21.0 .8268 165 6 ½ 229 9 2652210 341.55 20.729 - 21.51421.5 .8465 165 6 ½ 229 9 2652215 341.55 -22.0 .8661 165 6 ½ 229 9 2652220 349.60 21.516 - 22.301

22.5 .8858 176 6 15⁄16 240 9 7⁄16 2652225 385.75 22.304 - 23.08923.0 .9055 176 6 15⁄16 240 9 7⁄16 2652230 385.75 -23.5 .9252 176 6 15⁄16 240 9 7⁄16 2652235 399.80 23.091 - 23.85124.0 .9449 176 6 15⁄16 240 9 7⁄16 2652240 415.85 23.853 - 24.638

24.5 .9646 176 6 15⁄16 240 9 7⁄16 2652245 412.35 -25.0 .9843 187 7 3⁄8 251 9 7⁄8 2652250 415.85 24.641 - 25.476

TOOL

DIAMETERLENGTH TYPE

2658

EDP NO.

PRICE

TOOL

DIAMETER

RANGE*FLUTEOVER-

ALLFRAC. DECIMAL

5⁄16 .3125 8 10 265820 $213.80 0.3100 - 0.316011⁄32 .3438 8 10 265822 213.80 0.3281 - 0.34603⁄8 .3750 9 11 265824 225.95 0.3594 - 0.3770

13⁄32 .4062 9 11 265826 257.20 0.3906 - 0.4080

7⁄16 .4375 9 11 265828 257.20 0.4200 - 0.439015⁄32 .4688 9 ¾ 12 265830 271.60 0.4531 - 0.4710½ .5000 9 ¾ 12 265832 271.60 0.4800 - 0.5030

17⁄32 .5312 9 ¾ 12 265834 291.55 0.5118 - 0.5330

TOOL

DIAMETERLENGTH TYPE

2658

EDP NO.

PRICE

TOOL

DIAMETER

RANGE*FLUTEOVER-

ALLFRAC. DECIMAL

9⁄16 .5625 10 ¾ 13 265836 $314.00 0.5430 - 0.56505⁄8 .6250 10 ¾ 13 265840 331.55 0.6070 - 0.6270

11⁄16 .6875 11 ¾ 14 265844 345.25 0.6693 - 0.6900¾ .7500 11 ¾ 14 265848 365.40 0.7320 - 0.7530

13⁄16 .8125 12 ¾ 15 265852 388.05 0.7953 - 0.81607⁄8 .8750 12 ¾ 15 265856 418.15 0.8570 - 0.8780

15⁄16 .9375 13 ¾ 16 265860 446.75 0.9180 - 0.93901 1.0000 13 ¾ 16 265864 483.85 0.9820 - 1.0030


**6.5mm tool diameter has 6.35mm shank diameter.


TYPE 2652 - SHORT LENGTH - METRIC125° four facet point.Flat relieved, self centering point.Polished straight ]utes.Two coolant outlets.Drill body diameter smaller than tool diameter to prevent gauling. Shank diameter same size as tool diameter.Shank and tool diameter tolerances: plus .000”, minus .001”.Carbide high temperature brazed to hardened tool steel body.Extra long carbide tip for additional regrinds.Straight ]utes for superior hole straightness, improved `nish andmaximum chip capacity.


USE:For drilling most materials, including some stainless steels.For intermediate depth holes, 5-8 tool diameters deep.

TYPE 2658 - EXTRA LONG LENGTH125° four facet point.Flat relieved, self centering point.Polished straight ]utes.Two coolant outlets.Drill body diameter smaller than tool diameter to prevent gauling. Shank diameter same size as tool diameter.Shank and tool diameter tolerances: plus .000”, minus .001”.Carbide high temperature brazed to hardened tool steel body.Extra long carbide tip for additional regrinds.Straight ]utes for superior hole straightness, improved `nish andmaximum chip capacity.


USE:For drilling most materials, including some stainless steels.For very deep holes, 12-24 tool diameters deep.

MADE IN USA


TOOL

DIAMETER


FLUTEOVER-

ALL

TYPE 2616

EDP NO.PRICE

TYPE 2618

EDP NO.PRICE

FRAC. DECIMAL

½ .5000 3 1⁄8 6 261632 $44.95 261832 $51.7017⁄32 .5312 3 1⁄8 6 261634 65.75 261834 75.659⁄16 .5625 3 1⁄8 6 261636 68.15 261836 78.4019⁄32 .5938 3 1⁄8 6 261638 70.90 261838 81.50

5⁄8 .6250 3 1⁄8 6 261640 78.75 261840 90.5021⁄32 .6562 3 1⁄8 6 261642 85.40 261842 98.1511⁄16 .6875 3 1⁄8 6 261644 88.70 261844 102.1023⁄32 .7188 3 1⁄8 6 261646 92.05 261846 105.85

¾ .7500 3 1⁄8 6 261648 96.45 261848 110.9525⁄32 .7812 3 1⁄8 6 261650 106.35 261850 122.2513⁄16 .8125 3 1⁄8 6 261652 106.60 261852 122.6027⁄32 .8438 3 1⁄8 6 261654 106.60 261854 122.60

7⁄8 .8750 3 1⁄8 6 261656 110.90 261856 127.50

TOOL

DIAMETER


FLUTEOVER-

ALL

TYPE 2616

EDP NO.PRICE

TYPE 2618

EDP NO.PRICE

FRAC. DECIMAL

29⁄32 .9062 3 1⁄8 6 261658 $113.55 261858 $130.6015⁄16 .9375 3 1⁄8 6 261660 114.70 261860 131.8531⁄32 .9688 3 1⁄8 6 261662 118.60 261862 136.30

1 1.0000 3 1⁄8 6 261664 121.10 261864 139.30

1 1⁄32 1.0312 3 1⁄8 6 261666 116.90 261866 134.451 1⁄16 1.0625 3 1⁄8 6 261668 126.80 261868 145.751 3⁄32 1.0938 3 1⁄8 6 261670 129.80 261870 149.251 1⁄8 1.1250 3 1⁄8 6 261672 132.35 261872 152.15

1 5⁄32 1.1562 3 1⁄8 6 261674 160.60 261874 184.701 3⁄16 1.1875 3 1⁄8 6 261676 163.50 261876 188.051 7⁄32 1.2188 3 1⁄8 6 261678 171.70 261878 197.501 ¼ 1.2500 3 1⁄8 6 261680 156.75 261880 180.30

TOOL

DIAMETER

LENGTH TYPE

2677

90° PT.

EDP NO.

TYPE

2678

120° PT.

EDP NO.

TYPE

2679

140° PT.

EDP NO.

ALL

TYPES

PRICEFLUTEOVER-

ALLFRAC. DECIMAL

¼ .2500 1 4 267716 267816 267916 $69.653⁄8 .3750 1 1⁄8 5 267724 267824 267924 81.30½ .5000 1 ½ 6 267732 267832 267932 109.305⁄8 .6250 1 5⁄8 7 267740 267840 267940 158.30

¾ .7500 1 7⁄8 8 267748 267848 267948 183.651 1.0000 2 ¼ 8 267764 267864 267964 243.45

TOOL

DIAMETER

LENGTH TYPE

2647

90° PT.

EDP NO.

TYPE

2648

120° PT.

EDP NO.

TYPE

2649

140° PT.

EDP NO.

ALL

TYPES

PRICEFLUTEOVER-

ALLFRAC. DECIMAL

¼ .2500 1 2 ½ 264716 264816 264916 $66.153⁄8 .3750 1 1⁄8 3 1⁄8 264724 264824 264924 77.20½ .5000 1 ½ 3 ¾ 264732 264832 264932 103.905⁄8 .6250 1 5⁄8 4 ¼ 264740 264840 264940 150.40

¾ .7500 1 7⁄8 5 264748 264848 264948 174.501 1.0000 2 ¼ 6 264764 264864 264964 231.25

TYPE 2616 - 118° POINTShank: ½” diameter, 2 ¼” long.118° point - 6” overall length.Heavy duty quality construction.

TYPE 2618 - 135° SPLIT POINTSame as Type 2616 above, except 135° split point.Designed for drilling tough abrasive or high tensile materials.

SILVER & DEMING DRILLSCARBIDE TIPPED - 118° STANDARD AND 135° SPLIT POINT

OPTIONS:Modièd tool diameter.Metric tool diameter.Modièd point and/or angle.Flat(s) on shank.

USE:Allows larger tool diameter drilling using a ½” drill chuck.

CNC SPOTTING/CENTERING DRILLS CARBIDE TIPPED

ALL TYPES:Tool diameter not cleared.Accurately ground point.Polished ]utes.

USE:For accurate centering and chamfering.Drill wandering minimized.Cuts only to depth of point.

Not for drilling holes.Ideal for CNC machining.

TYPE 2677 - 90° POINT REGULAR LENGTH



TYPE 2647 - 90° POINT SHORT LENGTH



MADE IN USA


SHANK

DIAM.

TOOL

DIAMETER

STUB LENGTH DRILLS JOBBERS LENGTH DRILLS HARD STEEL DIE DRILLS

OVER-

ALL

LENGTH

TYPE 2640118° PT.

TYPE 2641135° PT.

OVER-

ALL

LENGTH

TYPE 2600118° PT.

TYPE 2601135° PT.

OVER-

ALL

LENGTH

TYPE 2670NEG. 118° PT.

TYPE 2672POS. 118° PT. BOTH

TYPESPRICEFRAC. DEC.

EDP NO.

PRICEEDP NO.

PRICEEDP NO.

PRICEEDP NO.

PRICE EDP NO. EDP NO.

¼

9⁄32 .2812 2 11⁄16 2640618 $27.10 2641618 $31.45 4 ¼ 2600618 $26.80 2601618 $31.05 - - - -5⁄16 .3125 2 13⁄16 2640620 28.80 2641620 33.45 4 ½ 2600620 29.00 2601620 33.70 4 ½ 2670620 2672620 $43.9011⁄32 .3438 3 2640622 33.50 2641622 38.80 4 ¾ 2600622 30.80 2601622 35.85 4 ¾ 2670622 2672622 46.753⁄8 .3750 3 1⁄8 2640624 34.35 2641624 39.85 5 2600624 32.75 2601624 38.10 5 2670624 2672624 50.25

13⁄32 .4062 3 5⁄16 2640626 40.70 2641626 47.40 5 ¼ 2600626 35.60 2601626 41.45 5 ¼ 2670626 2672626 58.907⁄16 .4375 3 7⁄16 2640628 43.50 2641628 48.30 5 ½ 2600628 38.75 2601628 45.00 5 ½ 2670628 2672628 68.2515⁄32 .4688 3 5⁄8 2640630 61.95 2641630 72.05 5 ¾ 2600630 43.60 2601630 50.45 5 ¾ 2670630 2672630 74.95½ .5000 3 ¾ 2640632 59.25 2641632 68.95 6 2600632 53.60 2601632 56.50 6 2670632 2672632 87.95

3⁄8

13⁄32 .4062 3 5⁄16 2640726 40.70 2641726 47.40 5 ¼ 2600726 35.60 2601726 41.45 - - -7⁄16 .4375 3 7⁄16 2640728 43.50 2641728 48.30 5 ½ 2600728 38.75 2601728 45.00 5 ½ 2670728 2672728 68.2515⁄32 .4688 3 5⁄8 2640730 61.95 2641730 72.05 5 ¾ 2600730 43.60 2601730 50.45 5 ¾ 2670730 2672730 74.95½ .5000 3 ¾ 2640732 59.25 2641732 68.95 6 2600732 53.60 2601732 56.50 6 2670732 2672732 87.95

17⁄32 .5312 3 7⁄8 2640734 73.90 2641734 83.25 6 5⁄8 2600734 69.80 2601734 81.10 6 2670734 2672734 100.909⁄16 .5625 4 2640736 73.90 2641736 83.25 6 5⁄8 2600736 70.45 2601736 81.80 6 2670736 2672736 104.3519⁄32 .5938 4 1⁄8 2640738 84.75 2641738 95.55 7 1⁄8 2600738 75.70 2601738 87.80 7 2670738 2672738 110.405⁄8 .6250 4 ¼ 2640740 84.75 2641740 95.55 7 1⁄8 2600740 85.75 2601740 99.40 7 2670740 2672740 113.80

21⁄32 .6562 4 ½ 2640742 101.95 2641742 114.95 7 1⁄8 2600742 87.15 2601742 101.10 7 ½ 2670742 2672742 121.7511⁄16 .6875 4 5⁄8 2640744 104.55 2641744 118.00 7 5⁄8 2600744 88.85 2601744 103.05 7 ½ 2670744 2672744 125.0523⁄32 .7188 4 ¾ 2640746 118.60 2641746 137.70 7 5⁄8 2600746 104.85 2601746 116.60 8 2670746 2672746 131.00¾ .7500 5 2640748 118.90 2641748 133.90 8 2600748 107.05 2601748 119.00 8 2670748 2672748 134.55

½

17⁄32 .5312 3 7⁄8 2640834 73.90 2641834 83.25 6 5⁄8 2600834 69.80 2601834 81.10 - - - -9⁄16 .5625 4 2640836 73.90 2641836 83.25 6 5⁄8 2600836 70.45 2601836 81.80 6 2670836 2672836 104.3519⁄32 .5938 4 1⁄8 2640838 84.75 2641838 95.55 7 1⁄8 2600838 75.70 2601838 87.80 7 2670838 2672838 110.405⁄8 .6250 4 ¼ 2640840 84.75 2641840 95.55 7 1⁄8 2600840 85.75 2601840 99.40 7 2670840 2672840 113.80

21⁄32 .6562 4 ½ 2640842 101.95 2641842 114.95 7 1⁄8 2600842 87.15 2601842 101.10 7 ½ 2670842 2672842 121.7511⁄16 .6875 4 5⁄8 2640844 104.55 2641844 118.00 7 5⁄8 2600844 88.85 2601844 103.05 7 ½ 2670844 2672844 125.0523⁄32 .7188 4 ¾ 2640846 118.60 2641846 137.70 7 5⁄8 2600846 104.85 2601846 116.60 8 2670846 2672846 131.00¾ .7500 5 2640848 118.90 2641848 133.90 8 2600848 107.05 2601848 119.00 8 2670848 2672848 134.55

13⁄16 .8125 5 ¼ 2640852 146.90 2641852 165.85 - - - - - 8 2670852 2672852 241.257⁄8 .8750 5 ½ 2640856 161.25 2641856 181.75 - - - - - 8 2670856 2672856 246.3015⁄16 .9375 5 ¾ 2640860 173.10 2641860 195.25 - - - - - 8 2670860 2672860 274.45

1 1.0000 6 2640864 182.85 2641864 206.35 - - - - - 8 2670864 2672864 291.15

¾

13⁄16 .8125 5 ¼ 2640952 146.90 2641952 165.85 - - - - - 8 2670952 2672952 241.257⁄8 .8750 5 ½ 2640956 161.25 2641956 181.75 - - - - - 8 2670956 2672956 246.3015⁄16 .9375 5 ¾ 2640960 173.10 2641960 195.25 - - - - - 8 2670960 2672960 274.45

1 1.0000 6 2640964 182.85 2641964 206.35 - - - - - 8 2670964 2672964 291.15

1 1⁄16 1.0625 6 ¼ 2640968 229.15 2641968 258.40 - - - - - - - - -1 1⁄8 1.1250 6 3⁄8 2640972 254.45 2641972 286.85 - - - - - - - - -1 3⁄16 1.1875 6 5⁄8 2640976 310.45 2641976 348.05 - - - - - - - - -1 ¼ 1.2500 6 ¾ 2640980 310.45 2641980 348.05 - - - - - - - - -

REDUCED SHANK DIAMETER DRILLSCARBIDE TIPPED - STUB LENGTH, JOBBERS LENGTH, AND HARD

STEEL DIE DRILLS - ¼”, 3⁄8”, ½”, OR ¾” SHANK DIAMETER

TYPES 2640, 2641, 2600, 2601, 2670, 2672OPTIONS:Modièd tool diameter.Metric tool diameter.Modièd point and/or angle.Flat(s) on shank.

USE:Can be used in drill chucks with diameter limitations.

MADE IN USA


GLASS & TILE DRILLS - CARBIDE TIPPED

TOOL

DIAMETER

SHANK

DIAMETER

OVERALL

LENGTH

TYPE 2681

REGULAR

EDP NO.

TYPE 2682

HIGH HELIX

EDP NO.

BOTH

TYPES

PRICE

1⁄8 1⁄8 3 268108 268208 $4.703⁄16 3⁄16 3 268112 268212 4.70¼ ¼ 4 268116 268216 4.70¼ ¼ 6 268117 268217 5.35

5⁄16 ¼ 4 268120 268220 5.355⁄16 ¼ 6 268121 268221 5.853⁄8 ¼ 4 268124 268224 5.853⁄8 ¼ 6 268125 268225 5.85

7⁄16 ¼ 4 268128 268228 6.457⁄16 ¼ 6 268129 268229 6.60½ ¼ 4 268132 268232 7.15½ ¼ 6 268133 268233 7.15

½ 3⁄8 6 268134 268234 7.159⁄16 3⁄8 6 268136 268236 9.655⁄8 ½ 6 268140 268240 10.25

11⁄16 ½ 6 268144 268244 11.60

¾ ½ 6 268148 268248 12.707⁄8 ½ 6 268156 268256 15.851 ½ 6 268164 268264 19.60

TOOL

DIAMETER

SHANK

DIAMETER


TYPE 2683

EDP NO.PRICE

TYPE 2684

EDP NO.PRICE

¼ ¼ 268316 $12.25 268416 $16.555⁄16 ¼ 268320 14.05 268420 19.153⁄8 ¼ 268324 15.40 268424 20.257⁄16 ¼ 268328 16.90 268428 22.15

½ 3⁄8 268332 19.35 268432 22.759⁄16 3⁄8 268336 22.15 268436 24.755⁄8 ½ 268340 24.75 268440 27.80

11⁄16 ½ 268344 27.75 268444 29.95

¾ ½ 268348 28.45 268448 32.057⁄8 ½ 268356 35.15 268456 40.051 ½ 268364 38.90 268464 43.85

TOOL

DIAMETER SHANK

DIAMETER

OVERALL

LENGTHEDP

NO.

PRICE

FRAC. DECIMAL

1⁄8 .1250 7⁄64 2 ½ 268008 $18.503⁄16 .1875 5⁄32 2 ½ 268012 18.50¼ .2500 7⁄32 2 ½ 268016 21.255⁄16 .3125 ¼ 3 268020 27.35

3⁄8 .3750 5⁄16 3 ½ 268024 30.407⁄16 .4375 3⁄8 3 ½ 268028 34.50½ .5000 7⁄16 3 ½ 268032 37.659⁄16 .5625 ½ 4 268036 52.90

5⁄8 .6250 9⁄16 4 268040 63.75

MASONRY DRILLS - CARBIDE TIPPEDFOUR TYPES FOR MOST APPLICATIONS

TYPE 2681 REGULAR HELIX (WIDE SPIRAL)Fast feeding with large open ]utes.

TYPE 2682 HIGH HELIX (FAST SPIRAL)

TYPE 2683 HIGH HELIX (FAST SPIRAL) – 13” LENGTH

TYPE 2684 HIGH HELIX (FAST SPIRAL) – 18” LENGTH

ALL TYPESCarbide tips brazed to tough steel bodies.Carbide tips are larger than the nominal drill size to provide clearance for installation of anchor screws, expansion shields and toggle bolts.Designed for use in portable electric drills.

USE:For drilling masonry including concrete, plaster, wall board, stone, brick, marble, slate, carbon, asphalt and cement.Drills perform best at moderate pressure and slow speeds.Keep drill cutting rather than rubbing.On deep holes, withdraw frequently to prevent clogging.Use punch or star type hand drill to shatter obstructions such as glazed rock.

TYPE 2680 - CARBIDE SPEAR POINT

STRAIGHT SHANKCarbide tip high temperature brazed.Heat treated tool steel body.Long carbide tip permits many regrinds.

USE:Drills glass, tile, porcelain, ceramic and other hard fragile materials without chipping or cracking the material when properly used.Speed should be about 25 surface feet per minute (300 to 600 RPM) using a steady, moderate hand feed.Constant ]ow of coolant important.Back material being drilled with wood or rubber to support material during drill break-through.Avoid vibration and excessive stress.Keep drill sharp to eliminate excessive pressure.

MADE IN USA


TOOL

DIAMETERMIN.

CUT

DIAM.

LENGTHSTRAIGHT

SHANKTAPER SHANK BOTH

TYPES

PRICE

SPECIAL

DECIMAL

SIZE RANGE

PRICE EACH - FINISHED TO DECIMAL SIZE

FRAC. DEC.CARBIDE

TIPFLUTE

OVER-

ALL

SHANK

DIAM.

EDP

NO.TAPER

EDP

NO.1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14**

3⁄8* .3750 .262 5⁄8 3 ½ 6 ¾ 3⁄8 262012 1 262212 $89.25 0.3471 - 0.3780 $121.85 $105.45 $100.05 $97.45 $94.60 $92.5013⁄32* .4062 .284 5⁄8 3 5⁄8 7 13⁄32 262013 1 262213 89.25 0.3781 - 0.4090 121.85 105.45 100.05 97.45 94.60 92.507⁄16* .4375 .306 ¾ 3 7⁄8 7 ¼ 7⁄16 262014 1 262214 89.25 0.4091 - 0.4410 121.85 105.45 100.05 97.45 94.60 92.50

15⁄32* .4688 .328 ¾ 4 1⁄8 7 ½ 15⁄32 262015 1 262215 89.25 0.4411 - 0.4720 121.85 105.45 100.05 97.45 94.60 92.50

½ .5000 .350 ¾ 4 3⁄8 8 ¼ ½ 262016 2 262216 89.25 0.4721 - 0.5030 121.85 105.45 100.05 97.45 94.60 92.5017⁄32 .5312 .372 ¾ 4 3⁄8 8 ¼ 17⁄32 262017 2 262217 89.60 0.5031 - 0.5340 122.30 105.95 100.40 97.85 95.05 92.809⁄16 .5625 .394 ¾ 4 3⁄8 8 ¼ 9⁄16 262018 2 262218 89.60 0.5341 - 0.5660 122.30 105.95 100.40 97.85 95.05 92.8019⁄32 .5938 .416 ¾ 4 3⁄8 8 ¼ 19⁄32 262019 2 262219 94.10 0.5661 - 0.5970 126.70 110.35 104.95 102.30 99.55 97.35

5⁄8 .6250 .438 ¾ 4 3⁄8 8 ¼ 5⁄8 262020 2 262220 94.10 0.5971 - 0.6280 126.70 110.35 104.95 102.30 99.55 97.3521⁄32 .6562 .459 ¾ 4 3⁄8 8 ¼ 21⁄32 262021 2 262221 95.20 0.6281 - 0.6590 127.85 111.50 106.05 103.40 100.70 98.4511⁄16 .6875 .481 7⁄8 4 3⁄8 8 ¼ 11⁄16 262022 2 262222 96.05 0.6591 - 0.6910 128.70 112.35 106.85 104.25 101.50 99.2023⁄32 .7188 .503 7⁄8 4 3⁄8 8 ¼ 23⁄32 262023 2 262223 96.05 0.6911 - 0.7220 128.70 112.35 106.85 104.25 101.50 99.20

¾ .7500 .525 7⁄8 4 3⁄8 8 ¼ ¾ 262024 2 262224 96.05 0.7221 - 0.7530 128.70 112.35 106.85 104.25 101.50 99.2025⁄32 .7812 .547 7⁄8 4 3⁄8 8 ¼ 25⁄32 262025 2 262225 98.15 0.7531 - 0.7840 130.80 114.45 109.00 106.40 103.60 101.4013⁄16 .8125 .569 7⁄8 4 7⁄8 9 ½ 13⁄16 262026 3 262226 100.90 0.7841 - 0.8160 133.55 117.20 111.70 109.15 106.25 104.1527⁄32 .8438 .591 7⁄8 4 7⁄8 9 ½ 27⁄32 262027 3 262227 106.25 0.8161 - 0.8470 138.95 122.60 117.15 114.50 111.70 109.50

7⁄8 .8750 .612 7⁄8 4 7⁄8 9 ½ 7⁄8 262028 3 262228 106.25 0.8471 - 0.8780 138.95 122.60 117.15 114.50 111.70 109.5029⁄32 .9062 .634 7⁄8 4 7⁄8 9 ½ 29⁄32 262029 3 262229 106.95 0.8781 - 0.9090 139.60 123.30 117.75 115.20 112.40 110.2015⁄16 .9375 .656 7⁄8 4 7⁄8 9 ½ 15⁄16 262030 3 262230 106.95 0.9091 - 0.9410 139.60 123.30 117.75 115.20 112.40 110.2031⁄32 .9688 .678 7⁄8 4 7⁄8 9 ½ 31⁄32 262031 3 262231 110.95 0.9411 - 0.9720 143.50 127.15 121.75 119.15 116.30 114.15

1 1.0000 .700 7⁄8 4 7⁄8 9 ½ 1 262032 3 262232 113.00 0.9721 - 1.0030 145.65 129.30 123.75 121.20 118.40 116.201 1⁄32 1.0312 .722 7⁄8 4 7⁄8 9 ½ 1 1⁄32 262033 3 262233 113.95 1.0031 - 1.0340 146.55 130.15 124.75 122.10 119.35 117.151 1⁄16 1.0625 .744 7⁄8 4 7⁄8 9 ½ 1 1⁄16 262034 3 262234 115.50 1.0341 - 1.0660 148.20 131.80 126.35 123.70 120.90 118.701 3⁄32 1.0938 .766 1 4 7⁄8 10 ½ 1 3⁄32 262035 4 262235 134.55 1.0661 - 1.0970 167.15 150.85 145.35 142.80 139.95 137.75

1 1⁄8 1.1250 .787 1 4 7⁄8 10 ½ 1 1⁄8 262036 4 262236 134.55 1.0971 - 1.1280 167.15 150.85 145.35 142.80 139.95 137.751 5⁄32 1.1562 .809 1 4 7⁄8 10 ½ 1 5⁄32 262037 4 262237 146.90 1.1281 - 1.1590 179.50 163.20 157.75 155.15 152.30 150.101 3⁄16 1.1875 .831 1 4 7⁄8 10 ½ 1 3⁄16 262038 4 262238 151.15 1.1591 - 1.1905 183.75 167.50 161.95 159.35 156.60 154.401 7⁄32 1.2188 .853 1 4 7⁄8 10 ½ 1 7⁄32 262039 4 262239 151.70 1.1906 - 1.2220 184.35 167.95 162.55 159.90 157.10 154.90

1 ¼ 1.2500 .875 1 4 7⁄8 10 ½ 1 ¼ 262040 4 262240 152.30 1.2221 - 1.2530 184.95 168.60 163.15 160.50 157.75 155.501 9⁄32 1.2812 .897 1 4 7⁄8 10 ½ 1 9⁄32 262041 4 262241 163.20 1.2531 - 1.2840 195.85 179.45 174.05 171.35 168.60 166.351 5⁄16 1.3125 .919 1 4 7⁄8 10 ½ 1 5⁄16 262042 4 262242 167.75 1.2841 - 1.3150 200.40 184.05 178.50 175.95 173.15 170.901 11⁄32 1.3438 .940 1 4 7⁄8 10 ½ 1 11⁄32 262043 4 262243 171.25 1.3151 - 1.3470 203.90 187.55 182.05 179.45 176.70 174.40

1 3⁄8 1.3750 .962 1 4 7⁄8 10 ½ 1 3⁄8 262044 4 262244 175.40 1.3471 - 1.3780 208.00 191.70 186.20 183.60 180.85 178.551 13⁄32 1.4062 .984 1 4 7⁄8 10 ½ 1 13⁄32 262045 4 262245 179.40 1.3781 - 1.4090 212.05 195.75 190.20 187.60 184.80 182.601 7⁄16 1.4375 1.006 1 4 7⁄8 10 ½ 1 7⁄16 262046 4 262246 184.65 1.4091 - 1.4410 217.30 201.00 195.45 192.85 190.10 187.851 15⁄32 1.4688 1.025 1 4 7⁄8 10 ½ 1 15⁄32 262047 4 262247 190.15 1.4411 - 1.4720 222.75 206.40 201.00 198.40 195.50 193.40

1 ½ 1.5000 1.050 1 4 7⁄8 10 ½ 1 ½ 262048 4 262248 194.25 1.4721 - 1.5030 226.85 210.45 205.05 202.45 199.60 197.50

CORE DRILLS − CARBIDE TIPPEDSTRAIGHT & TAPER SHANK – FOUR SPIRAL FLUTES

TYPE 2620 – STRAIGHT SHANK – FRACTIONAL SIZES

TYPE 2622 – TAPER SHANK – FRACTIONAL SIZES

BOTH TYPES HAVECutting diameter tolerance plus .000” minus .001”.Carbide tips brazed to one piece hardened tool steel bodies.Larger right spiral ]ute capacity permits higher feeds and speeds.118º included chamfer angle.

OPTIONS:Intermediate decimal sizes - see priced table below.Special point angles.

USE:Core drills are designed for economically enlarging cored, punched or drilled holes, removing up to 30% of the hole diameter.The balanced cutting action of the core drill removes considerably more material than a reamer, often eliminating the need for a `nal reaming or boring operation.For cast iron, non-ferrous metals, some steels, composites, plastics and non-metals.

*3 ]utes **Quantities of 15 or more: price of fractional size in same size range.

MADE IN USA


TOOL

DIAMETER

DIMENSIONS TYPE 2620 TYPE 2622 BOTH

TYPES

METRIC

PRICE

FINISHED TO MODIFIED TOOL DIAMETER

MIN.

CUT

DIAM.

LENGTHSHANK

DIAM.

METRIC

EDP

NO.

MORSE

TAPER

METRIC

EDP

NO.

MODIFIED

DECIMAL

RANGE (mm)

PRICE EACH BASED ON QUANTITY ORDERED

CARBIDE

TIPFLUTE

OVER-

ALL1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14

OVER

14mm INCH

9.0* .3543 .262 5⁄8 3 ½ 6 ¾ 3⁄8 2620090 1 2622090 $100.05 8.815-9.601 $124.60 $108.35 $102.80 $100.15 $97.45 $95.15 $92.0010.0* .3937 .284 5⁄8 3 5⁄8 7 13⁄32 2620100 1 2622100 100.05 9.602-10.389 124.60 108.35 102.80 100.15 97.45 95.15 92.0011.0* .4331 .306 ¾ 3 7⁄8 7 ¼ 7⁄16 2620110 1 2622110 100.05 10.390-11.201 124.60 108.35 102.80 100.15 97.45 95.15 92.00

- - .328 ¾ 4 1⁄8 7 ½ 15⁄32 2620119 1 2622119 - 11.202-11.989 124.60 108.35 102.80 100.15 97.45 95.15 92.00

12.0 .4724 .350 ¾ 4 3⁄8 8 ¼ ½ 2620120 2 2622120 100.05 11.990-12.776 124.60 108.35 102.80 100.15 97.45 95.15 92.0013.0 .5118 .372 ¾ 4 3⁄8 8 ¼ 17⁄32 2620130 2 2622130 100.40 12.777-13.564 124.95 108.75 103.25 100.65 97.85 95.60 92.5014.0 .5512 .394 ¾ 4 3⁄8 8 ¼ 9⁄16 2620140 2 2622140 100.40 13.565-14.376 124.95 108.75 103.25 100.65 97.85 95.60 92.5015.0 .5906 .416 ¾ 4 3⁄8 8 ¼ 19⁄32 2620150 2 2622150 104.95 14.377-15.164 129.50 113.20 107.75 105.05 102.30 100.05 96.90

- - .438 ¾ 4 3⁄8 8 ¼ 5⁄8 2620159 2 2622159 - 15.165-15.951 129.50 113.20 107.75 105.05 102.30 100.05 96.9016.0 .6299 .459 ¾ 4 3⁄8 8 ¼ 21⁄32 2620160 2 2622160 106.05 15.952-16.739 130.65 114.30 108.85 106.15 103.40 101.10 98.0517.0 .6693 .481 7⁄8 4 3⁄8 8 ¼ 11⁄16 2620170 2 2622170 106.85 16.740-17.551 131.45 115.10 109.60 106.95 104.25 101.95 98.8018.0 .7087 .503 7⁄8 4 3⁄8 8 ¼ 23⁄32 2620180 2 2622180 106.85 17.552-18.339 131.45 115.10 109.60 106.95 104.25 101.95 98.80

19.0 .7480 .525 7⁄8 4 3⁄8 8 ¼ ¾ 2620190 2 2622190 106.85 18.340-19.126 131.45 115.10 109.60 106.95 104.25 101.95 98.80- - .547 7⁄8 4 3⁄8 8 ¼ 25⁄32 2620199 2 2622199 - 19.127-19.914 133.55 117.30 111.85 109.15 106.40 104.15 100.95

20.0 .7874 .569 7⁄8 4 7⁄8 9 ½ 13⁄16 2620200 3 2622200 111.70 19.915-20.726 136.25 120.05 114.50 111.90 109.15 106.85 103.7021.0 .8268 .591 7⁄8 4 7⁄8 9 ½ 27⁄32 2620210 3 2622210 117.15 20.727-21.514 141.70 125.40 119.95 117.30 114.50 112.30 109.15

22.0 .8661 .612 7⁄8 4 7⁄8 9 ½ 7⁄8 2620220 3 2622220 117.15 21.515-22.301 141.70 125.40 119.95 117.30 114.50 112.30 109.1523.0 .9055 .634 7⁄8 4 7⁄8 9 ½ 29⁄32 2620230 3 2622230 117.75 22.302-23.089 142.35 126.05 120.65 117.85 115.20 112.95 109.80

- - .656 7⁄8 4 7⁄8 9 ½ 15⁄16 2620239 3 2622239 - 23.090-23.901 142.35 126.05 120.65 117.85 115.20 112.95 109.8024.0 .9449 .678 7⁄8 4 7⁄8 9 ½ 31⁄32 2620240 3 2622240 121.75 23.902-24.689 146.30 130.00 124.55 121.85 119.15 116.80 113.70

25.0 .9843 .700 7⁄8 4 7⁄8 9 ½ 1 2620250 3 2622250 123.75 24.690-25.476 148.40 132.10 126.60 123.95 121.20 118.95 115.8026.0 1.0236 .722 7⁄8 4 7⁄8 9 ½ 1 1⁄32 2620260 3 2622260 124.75 25.477-26.264 149.30 133.00 127.55 124.85 122.10 119.90 116.7027.0 1.0630 .744 7⁄8 4 7⁄8 9 ½ 1 1⁄16 2620270 3 2622270 126.35 26.265-27.076 150.95 134.60 129.10 126.50 123.70 121.50 118.35

- - .766 1 4 7⁄8 10 ½ 1 3⁄32 2620279 4 2622279 - 27.077-27.864 169.90 153.60 148.20 145.45 142.80 140.45 137.40

28.0 1.1024 .787 1 4 7⁄8 10 ½ 1 1⁄8 2620280 4 2622280 145.35 27.865-28.651 169.90 153.60 148.20 145.45 142.80 140.45 137.4029.0 1.1417 .809 1 4 7⁄8 10 ½ 1 5⁄32 2620290 4 2622290 157.75 28.652-29.439 182.25 166.00 160.50 157.85 155.15 152.80 149.6530.0 1.1811 .831 1 4 7⁄8 10 ½ 1 3⁄16 2620300 4 2622300 161.95 29.440-30.239 186.55 170.25 164.85 162.05 159.35 157.10 154.0031.0 1.2205 .853 1 4 7⁄8 10 ½ 1 7⁄32 2620310 4 2622310 162.55 30.240-31.039 187.10 170.80 165.35 162.65 159.90 157.60 154.50

- - .875 1 4 7⁄8 10 ½ 1 ¼ 2620319 4 2622319 - 31.040-31.826 187.65 171.35 165.95 163.30 160.50 158.25 155.1532.0 1.2598 .897 1 4 7⁄8 10 ½ 1 9⁄32 2620320 4 2622320 174.05 31.827-32.614 198.60 182.25 176.80 174.15 171.35 169.10 166.0033.0 1.2992 .919 1 4 7⁄8 10 ½ 1 5⁄16 2620330 4 2622330 178.50 32.615-33.401 203.05 186.75 181.30 178.60 175.95 173.70 170.5534.0 1.3386 .940 1 4 7⁄8 10 ½ 1 11⁄32 2620340 4 2622340 182.05 33.402-34.214 206.70 190.40 184.90 182.20 179.45 177.20 174.10

35.0 1.3780 .962 1 4 7⁄8 10 ½ 1 3⁄8 2620350 4 2622350 186.20 34.215-35.001 210.85 194.50 189.05 186.35 183.60 181.30 178.25- - .984 1 4 7⁄8 10 ½ 1 13⁄32 2620359 4 2622359 - 35.002-35.789 214.75 198.55 192.95 190.40 187.60 185.35 182.20

36.0 1.4173 1.006 1 4 7⁄8 10 ½ 1 7⁄16 2620360 4 2622360 195.45 35.790-36.601 220.05 203.75 198.35 195.55 192.85 190.60 187.5037.0 1.4567 1.025 1 4 7⁄8 10 ½ 1 15⁄32 2620370 4 2622370 201.00 36.602-37.389 225.50 209.25 203.75 201.10 198.40 196.05 192.90

38.0 1.4961 1.050 1 4 7⁄8 10 ½ 1 ½ 2620380 4 2622380 205.05 37.390-38.176 229.60 213.30 207.85 205.15 202.45 200.15 197.00

CORE DRILLS − CARBIDE TIPPED − METRIC DIAMETERSTRAIGHT & TAPER SHANK – FOUR SPIRAL FLUTES

TYPE 2620 – STRAIGHT SHANK

TYPE 2622 – TAPER SHANK

BOTH TYPES HAVECutting diameter tolerance plus .000” minus .001”.Carbide tips brazed to one piece hardened tool steel bodies.Larger right spiral ]ute capacity permits higher feeds and speeds.118º included chamfer angle.

OPTIONS:Intermediate metric sizes - see priced table below.Special point angles.

USE:Core drills are designed for economically enlarging cored, punched or drilled holes, removing up to 30% of the hole diameter.The balanced cutting action of the core drill removes considerably more material than a reamer, often eliminating the need for a `nal reaming or boring operation.For cast iron, non-ferrous metals, some steels, composites, plastics and non-metals.

*3 ]utes

NOTE: Tool diameter in millimeters (mm); all other dimensions in inches.

MADE IN USA


MORSE

TAPER NO.

OVERALL

LENGTH

TYPE 2595 - FULL CENTER - MORSE TAPER TYPE 2592 - HALF CENTER - MORSE TAPER

CARBIDE TIP

LENGTH

CARBIDE TIP

DIAMETER

EDP

NO.PRICE

CARBIDE TIP

LENGTH

CARBIDE TIP

DIAMETER

UNDERCUT

LENGTH

HEIGHT

ABOVE CENTER

EDP

NO.PRICE

1 3 5⁄16 7⁄16 ¼ 259501 $33.35 7⁄16 ¼ 1 9⁄64 259201 $61.452 4 3⁄16 9⁄16 5⁄16 259502 39.70 9⁄16 5⁄16 1 3⁄8 11⁄64 259202 76.103 5 ¼ 7⁄8 ½ 259503 72.80 11⁄16 3⁄8 1 11⁄16 13⁄64 259203 114.95

4 6 ¾ 7⁄8 ½ 259504 110.65 7⁄8 ½ 2 ¼ 17⁄64 259204 168.105 8 ½ 1 1⁄16 5⁄8 259505 181.05 1 1⁄16 5⁄8 2 ¾ 21⁄64 259205 280.95

BROWN

& SHARPE

TAPER NO.

OVERALL

LENGTH

TYPE 2596 - FULL CENTER - B & S TAPER TYPE 2593 - HALF CENTER - B & S TAPER

CARBIDE TIP

LENGTH

CARBIDE TIP

DIAMETER

EDP

NO.PRICE

CARBIDE TIP

LENGTH

CARBIDE TIP

DIAMETER

UNDERCUT

LENGTH

HEIGHT

ABOVE CENTER

EDP

NO.PRICE

7 4 ½ 9⁄16 5⁄16 259607 $50.90 9⁄16 5⁄16 1 1⁄8 11⁄64 259307 $86.258 5 11⁄32 11⁄16 3⁄8 259608 71.45 9⁄16 5⁄16 1 5⁄16 11⁄64 259308 113.259 6 7⁄8 ½ 259609 90.60 11⁄16 3⁄8 1 ½ 13⁄64 259309 134.85

10 8 17⁄32 7⁄8 ½ 259610 129.50 7⁄8 ½ 2 ¼ 17⁄64 259310 188.9011 10 1⁄8 1 1⁄16 5⁄8 259611 172.00 1 1⁄16 5⁄8 2 ½ 3⁄8 259311 259.50

JARNO

TAPER

NO.

OVERALL

LENGTH

TYPE 2597 - FULL CENTER - JARNO TAPER TYPE 2594 - HALF CENTER - JARNO TAPER

CARBIDE TIP

LENGTH

CARBIDE TIP

DIAMETER

EDP

NO.PRICE

CARBIDE TIP

LENGTH

CARBIDE TIP

DIAMETER

UNDERCUT

LENGTH

HEIGHT

ABOVE CENTER

EDP

NO.PRICE

4 3 7⁄16 ¼ 259704 $36.45 7⁄16 ¼ 25⁄32 9⁄64 259404 $67.055 3 5⁄8 7⁄16 ¼ 259705 40.30 7⁄16 ¼ 15⁄16 9⁄64 259405 74.206 4 ½ 9⁄16 5⁄16 259706 49.75 9⁄16 5⁄16 1 1⁄8 11⁄64 259406 82.70

7 5 ¼ 11⁄16 3⁄8 259707 64.45 11⁄16 3⁄8 1 3⁄16 13⁄64 259407 108.408 6 7⁄8 ½ 259708 83.35 7⁄8 ½ 1 3⁄8 17⁄64 259408 133.909 6 ¾ 7⁄8 ½ 259709 90.45 7⁄8 ½ 1 5⁄8 17⁄64 259409 150.85

10 7 ½ 7⁄8 ½ 259710 114.95 7⁄8 ½ 2 17⁄64 259410 178.6011 8 ¼ 7⁄8 ½ 259711 129.35 7⁄8 ½ 2 17⁄64 259411 197.7012 9 1 1⁄16 5⁄8 259712 143.10 1 1⁄16 5⁄8 2 ¼ 21⁄64 259412 222.70

CENTERS – CARBIDE TIPPEDMORSE – BROWN & SHARPE – JARNO TAPERS

FULL CENTERSTYPE 2595 MORSE TAPER – FULL CENTER

TYPE 2596 BROWN & SHARPE TAPER – FULL CENTER

TYPE 2597 JARNO TAPER – FULL CENTERCarbide tips brazed to alloy steel bodies.Center precision ground to 60˚ included angle.Center concentric to precision ground taper.

HALF CENTERSTYPE 2592 MORSE TAPER – HALF CENTER

TYPE 2593 BROWN & SHARPE TAPER – HALF CENTER

TYPE 2594 JARNO TAPER – HALF CENTERHalf centers provide clearance for the grinding wheel or turning tool when machining a small diameter near the end of a part.

USE:Carbide tip centers hold point angle and overall concentricity so parts can be held securely and accurately for precision turning and grinding.When operating at high rates of speed carbide tipped centers will not wear as rapidly, avoiding burning or scoring of the part’s center holes.

MADE IN USA


TOOLDIAMETER SHANK

DIAM.

NO.OF

FLUTES

LENGTH PINHOLEDIAM.

STRAIGHTTYPE 2430

EDP NO.

LEFTSPIRAL

TYPE 2440EDP NO.

BOTHTYPESPRICE

SPECIALDECIMAL

SIZE RANGE


FRAC. DECIMAL FLUTECAR-BIDE

OVER-ALL

1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14*

3⁄16 .1875 ¼ 4 1 ½ 2 ¼ 3⁄32 243006 244006 $44.00 0.1770 - 0.2040 $76.20 $60.05 $54.65 $52.10 $49.30 $47.107⁄32 .2188 ¼ 4 1 ½ 2 ¼ 3⁄32 243007 244007 44.00 0.2041 - 0.2210 76.20 60.05 54.65 52.10 49.30 47.1015⁄64 .2344 ¼ 4 1 ½ 2 ¼ 3⁄32 24302344 24402344 44.00 0.2211 - 0.2380 76.20 60.05 54.65 52.10 49.30 47.10¼ .2500 ¼ 4 1 ½ 2 ¼ 3⁄32 243008 244008 44.00 0.2381 - 0.2530 76.20 60.05 54.65 52.10 49.30 47.10

9⁄32 .2812 3⁄8 4 1 ½ 2 ¼ 1⁄8 243009 244009 44.00 0.2531 - 0.2840 76.20 60.05 54.65 52.10 49.30 47.105⁄16 .3125 3⁄8 4 1 1 2 ¼ 1⁄8 243010 244010 51.10 0.2841 - 0.3150 83.35 67.15 61.80 59.20 56.40 54.2511⁄32 .3438 3⁄8 4 1 ¼ 1 ¼ 2 ½ 1⁄8 243011 244011 51.50 0.3151 - 0.3470 83.80 67.70 62.20 59.70 56.85 54.703⁄8 .3750 3⁄8 4 1 ¼ 1 ¼ 2 ½ 1⁄8 243012 244012 55.90 0.3471 - 0.3780 88.20 72.05 66.60 64.00 61.20 59.05

13⁄32 .4062 ½ 4 1 ¼ 1 ¼ 2 ½ 3⁄16 243013 244013 56.70 0.3781 - 0.4090 89.05 72.75 67.40 64.80 62.05 59.907⁄16 .4375 ½ 4 1 ¼ 1 ¼ 2 ½ 3⁄16 243014 244014 67.10 0.4091 - 0.4410 99.45 83.25 77.80 75.30 72.50 70.3515⁄32 .4688 ½ 4 1 ¼ 1 ¼ 2 ½ 3⁄16 243015 244015 67.10 0.4411 - 0.4720 99.45 83.25 77.80 75.30 72.50 70.35½ .5000 ½ 4 1 ¼ 1 ¼ 2 ½ 3⁄16 243016 244016 73.45 0.4721 - 0.5030 106.65 90.05 84.50 81.85 78.95 76.75

17⁄32 .5312 5⁄8 6 1 ½ 1 ½ 3 ¼ 243017 244017 73.45 0.5031 - 0.5340 106.65 90.05 84.50 81.85 78.95 76.759⁄16 .5625 5⁄8 6 1 ½ 1 ½ 3 ¼ 243018 244018 77.45 0.5341 - 0.5660 110.50 93.95 88.35 85.75 82.85 80.6019⁄32 .5938 5⁄8 6 1 ½ 1 ½ 3 ¼ 243019 244019 77.45 0.5661 - 0.5970 110.50 93.95 88.35 85.75 82.85 80.605⁄8 .6250 5⁄8 6 1 ½ 1 ½ 3 ¼ 243020 244020 79.50 0.5971 - 0.6280 112.70 96.05 90.45 87.80 84.95 82.75

21⁄32 .6562 5⁄8 6 1 ½ 1 ½ 3 ¼ 243021 244021 79.50 0.6281 - 0.6590 112.70 96.05 90.45 87.80 84.95 82.7511⁄16 .6875 5⁄8 6 1 ½ 1 ½ 3 ¼ 243022 244022 83.20 0.6591 - 0.6910 116.30 99.70 94.20 91.50 88.65 86.4523⁄32 .7188 ¾ 6 1 ½ 1 ½ 3 5⁄16 243023 244023 83.20 0.6911 - 0.7220 116.30 99.70 94.20 91.50 88.65 86.45¾ .7500 ¾ 6 1 ½ 1 ½ 3 5⁄16 243024 244024 85.35 0.7221 - 0.7530 118.40 101.85 96.25 93.60 90.80 88.55

25⁄32 .7812 ¾ 6 1 ½ 1 ½ 3 5⁄16 243025 244025 85.35 0.7531 - 0.7840 118.40 101.85 96.25 93.60 90.80 88.5513⁄16 .8125 ¾ 6 1 ½ 1 ½ 3 5⁄16 243026 244026 92.65 0.7841 - 0.8160 125.80 109.25 103.60 101.00 98.15 95.9527⁄32 .8438 ¾ 6 1 ½ 1 ½ 3 5⁄16 243027 244027 92.65 0.8161 - 0.8470 125.80 109.25 103.60 101.00 98.15 95.957⁄8 .8750 ¾ 6 1 ½ 1 ½ 3 5⁄16 243028 244028 101.25 0.8471 - 0.8780 135.70 118.35 112.60 109.85 106.95 104.60

29⁄32 .9062 ¾ 6 1 ½ 1 ½ 3 5⁄16 243029 244029 101.25 0.8781 - 0.9090 135.70 118.35 112.60 109.85 106.95 104.6015⁄16 .9375 ¾ 6 1 ½ 1 ½ 3 5⁄16 243030 244030 111.50 0.9091 - 0.9410 145.90 128.70 122.90 120.15 117.20 114.9031⁄32 .9688 ¾ 8 1 ½ 1 ½ 3 5⁄16 243031 244031 111.50 0.9411 - 0.9720 145.90 128.70 122.90 120.15 117.20 114.90

1 1.0000 ¾ 8 1 ½ 1 ½ 3 5⁄16 243032 244032 116.95 0.9721 - 1.0030 151.40 134.20 128.40 125.65 122.65 120.35

1 1⁄16 1.0625 ¾ 8 1 ½ 1 ½ 3 5⁄16 243034 244034 116.95 1.0031 - 1.0660 151.40 134.20 128.40 125.65 122.65 120.351 1⁄8 1.1250 ¾ 8 1 ½ 1 ½ 3 5⁄16 243036 244036 136.95 1.0661 - 1.1280 171.35 154.05 148.30 145.60 142.60 140.301 3⁄16 1.1875 ¾ 8 1 ½ 1 ½ 3 5⁄16 243038 244038 142.75 1.1281 - 1.1905 177.20 159.95 154.10 151.40 148.45 146.101 ¼ 1.2500 ¾ 8 1 ½ 1 ½ 3 5⁄16 243040 244040 167.20 1.1906 - 1.2530 201.65 184.45 178.70 175.90 173.00 170.65

1 5⁄16 1.3125 ¾ 8 1 ½ 1 ½ 3 5⁄16 243042 244042 167.20 1.2531 - 1.3155 201.65 184.45 178.70 175.90 173.00 170.651 3⁄8 1.3750 ¾ 8 1 ½ 1 ½ 3 5⁄16 243044 244044 169.65 1.3156 - 1.3780 204.05 186.80 181.10 178.30 175.45 173.101 7⁄16 1.4375 ¾ 8 1 ½ 1 ½ 3 5⁄16 243046 244046 197.75 1.3781 - 1.4405 232.20 214.90 209.20 206.40 203.45 201.201 ½ 1.5000 ¾ 8 1 ½ 1 ½ 3 5⁄16 243048 244048 237.50 1.4406 - 1.5030 271.90 254.70 248.95 246.20 243.15 240.85

CNC STUB REAMERS

CARBIDE TIPPED - STRAIGHT FLUTES AND LEFT SPIRAL FLUTES

OPTIONS:Decimal & metric sizes (priced as indicated in extendedtable below).Cutting diameter reduced for small steps or pilot.Radius end or end chamfer other than 45˚.End cutting.Semi-finished Type 2430 & Type 2440 in stock (pg. 65).Closer tolerance.For +.0002” add $1.00 per tool.For +.0001” add $3.00 per tool.

TYPE 2430 - STRAIGHT FLUTES

TYPE 2440 - LEFT SPIRAL FLUTES

BOTH TYPES:Polished Wutes for high volume chip Wow.Flute long carbide on .2841” tool diameter and larger.Straight shanks Xt into standard holders.Pin cross holes permit use in pin drive Woating holders.Carbide tips brazed to one piece hardened alloy steel bodies.Cutting diameter tolerance plus .0003” minus .0000”.

*Quantities of 15 or more: price of fractional size in same size range.

MADE IN USA


COOLANT FEEDING REAMERS

CARBIDE TIPPED - CENTER FEED FOR BLIND HOLES - STRAIGHT FLUTES

TOOLDIAMETER NO.

OFFLUTES

LENGTH MAX.SHANKDIAM.

TYPE2424

EDP NO.PRICE

SPECIALDECIMAL

SIZE RANGE



ALL1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14*

3⁄16 .1875 4 1 ¼ 5 .1805 242406 $110.80 0.1770 - 0.2040 $145.45 $128.05 $122.20 $119.50 $116.55 $114.2013⁄64 .2031 4 1 ¼ 5 .1805 24242031 110.80 - - - - - - -7⁄32 .2188 4 1 ¼ 5 .2075 242407 110.80 0.2041 - 0.2210 145.45 128.05 122.20 119.50 116.55 114.2015⁄64 .2344 4 1 ½ 6 .2265 24242344 110.80 0.2211 - 0.2380 145.45 128.05 122.20 119.50 116.55 114.20

¼ .2500 4 1 ½ 6 .2405 242408 110.80 0.2381 - 0.2530 145.45 128.05 122.20 119.50 116.55 114.2017⁄64 .2656 4 1 ½ 6 .2485 24242656 117.60 - - - - - - -9⁄32 .2812 4 1 ½ 6 .2485 242409 117.60 0.2531 - 0.2840 152.20 134.85 129.05 126.25 123.30 121.0019⁄64 .2969 4 1 ½ 6 .2792 24242969 124.20 - - - - - - -

5⁄16 .3125 4 1 ½ 6 .2792 242410 124.20 0.2841 - 0.3150 158.85 141.45 135.65 132.80 129.90 127.5521⁄64 .3281 4 1 ½ 6 .2792 24243281 125.15 - - - - - - -11⁄32 .3438 4 1 ½ 6 .2792 242411 125.15 0.3151 - 0.3470 159.75 142.40 136.65 133.80 130.90 128.6023⁄64 .3594 4 1 ¾ 7 .3105 24243594 126.45 - - - - - - -

3⁄8 .3750 4 1 ¾ 7 .3105 242412 126.45 0.3471 - 0.3780 161.05 143.70 137.90 135.10 132.15 129.8525⁄64 .3906 4 1 ¾ 7 .3105 24243906 126.85 - - - - - - -13⁄32 .4062 4 1 ¾ 7 .3105 242413 126.85 0.3781 - 0.4090 161.45 144.15 138.35 135.55 132.60 130.2027⁄64 .4219 6 1 ¾ 7 .3730 24244219 128.10 - - - - - - -

7⁄16 .4375 6 1 ¾ 7 .3730 242414 128.10 0.4091 - 0.4410 162.75 145.45 139.55 136.85 133.80 131.5529⁄64 .4531 6 1 ¾ 7 .3730 24244531 129.20 - - - - - - -15⁄32 .4688 6 1 ¾ 7 .3730 242415 129.20 0.4411 - 0.4720 163.90 146.55 140.70 137.95 134.95 132.6531⁄64 .4844 6 2 8 .4355 24244844 130.70 - - - - - - -

½ .5000 6 2 8 .4355 242416 130.70 0.4721 - 0.5030 165.35 148.05 142.25 139.45 136.55 134.1033⁄64 .5156 6 2 8 .4355 24245156 133.65 - - - - - - -17⁄32 .5312 6 2 8 .4355 242417 133.65 0.5031 - 0.5340 168.20 150.90 145.10 142.35 139.40 137.009⁄16 .5625 6 2 8 .4355 242418 135.55 0.5341 - 0.5660 170.20 152.80 147.00 144.30 141.30 138.95

19⁄32 .5938 6 2 8 .4355 242419 138.40 0.5661 - 0.5970 173.00 155.65 149.85 147.15 144.15 141.805⁄8 .6250 6 2 ¼ 9 .5615 242420 141.00 0.5971 - 0.6280 175.65 158.25 152.50 149.65 146.75 144.40

21⁄32 .6562 6 2 ¼ 9 .5615 242421 156.10 0.6281 - 0.6590 190.70 173.35 167.50 164.85 161.80 159.5011⁄16 .6875 6 2 ¼ 9 .5615 242422 159.25 0.6591 - 0.6910 193.85 176.60 170.70 168.00 165.00 162.65

23⁄32 .7188 6 2 ¼ 9 .5615 242423 166.10 0.6911 - 0.7220 200.70 183.45 177.65 174.85 171.90 169.50¾ .7500 6 2 ½ 9 ½ .6245 242424 166.10 0.7221 - 0.7530 200.70 183.45 177.65 174.85 171.90 169.50

25⁄32 .7812 6 2 ½ 9 ½ .6245 242425 171.05 0.7531 - 0.7840 205.65 188.30 182.55 179.80 176.75 174.4013⁄16 .8125 6 2 ½ 9 ½ .6245 242426 171.05 0.7841 - 0.8160 205.65 188.30 182.55 179.80 176.75 174.40

27⁄32 .8438 6 2 ½ 9 ½ .6245 242427 176.90 0.8161 - 0.8470 211.50 194.20 188.35 185.60 182.65 180.257⁄8 .8750 6 2 5⁄8 10 .7495 242428 183.60 0.8471 - 0.8780 219.55 201.50 195.45 192.60 189.55 187.10

29⁄32 .9062 6 2 5⁄8 10 .7495 242429 203.85 0.8781 - 0.9090 239.75 221.75 215.70 212.90 209.75 207.4015⁄16 .9375 8 2 5⁄8 10 .7495 242430 203.85 0.9091 - 0.9410 239.75 221.75 215.70 212.90 209.75 207.40

31⁄32 .9688 8 2 5⁄8 10 .7495 242431 204.65 0.9411 - 0.9720 240.55 222.60 216.60 213.70 210.55 208.201 1.0000 8 2 ¾ 10 ½ .8745 242432 204.65 0.9721 - 1.0030 240.55 222.60 216.60 213.70 210.55 208.201 1⁄16 1.0625 8 2 ¾ 10 ½ .8745 242434 210.45 1.0031 - 1.0660 246.40 228.40 222.35 219.55 216.35 214.001 1⁄8 1.1250 8 2 7⁄8 11 .8745 242436 217.80 1.0661 - 1.1280 253.65 235.70 229.60 226.75 223.65 221.20

1 3⁄16 1.1875 8 2 7⁄8 11 .9995 242438 233.25 1.1281 - 1.1905 269.20 251.15 245.05 242.30 239.20 236.801 ¼ 1.2500 8 3 11 ½ .9995 242440 236.25 1.1906 - 1.2530 272.25 254.20 248.20 245.35 242.30 239.901 5⁄16 1.3125 8 3 11 ½ .9995 242442 243.05 1.2531 - 1.3155 279.05 260.95 255.00 252.05 249.05 246.601 3⁄8 1.3750 8 3 ¼ 12 .9995 242444 252.90 1.3156 - 1.3780 288.85 270.80 264.85 261.95 258.90 256.40

1 7⁄16 1.4375 8 3 ¼ 12 .9995 242446 260.80 1.3781 - 1.4405 296.80 278.75 272.80 269.90 266.80 264.401 ½ 1.5000 8 3 ½ 12 ½ 1.2495 242448 269.55 1.4406 - 1.5030 305.50 287.50 281.50 278.60 275.55 273.101 9⁄16 1.5625 8 3 ½ 12 ½ 1.2495 242450 287.00 1.5031 - 1.5660 321.25 304.10 298.40 295.65 292.65 290.401 5⁄8 1.6250 8 3 ½ 13 1.2495 242452 314.20 1.5661 - 1.6280 348.40 331.30 325.60 322.80 319.85 317.60

1 11⁄16 1.6875 8 3 ½ 13 1.2495 242454 320.85 1.6281 - 1.6910 355.10 338.00 332.25 329.50 326.55 324.251 ¾ 1.7500 10 3 ½ 13 ½ 1.2495 242456 351.40 1.6911 - 1.7530 385.65 368.50 362.80 360.05 357.05 354.801 13⁄16 1.8125 10 3 ½ 13 ½ 1.4995 242458 365.75 1.7531 - 1.8160 400.00 382.85 377.15 374.40 371.40 369.151 7⁄8 1.8750 10 3 ½ 14 1.4995 242460 386.10 1.8161 - 1.8780 420.35 403.20 397.50 394.75 391.80 389.50

1 15⁄16 1.9375 10 3 ½ 14 1.4995 242462 409.35 1.8781 - 1.9410 443.60 426.50 420.75 418.00 415.05 412.752 2.0000 12 3 ½ 14 1.4995 242464 425.10 1.9411 - 2.0030 459.35 442.25 436.50 433.75 430.80 428.50

TYPE 2424 - COOLANT FEEDING REAMERFull length center feeding coolant hole.Flute long carbide on .2841” tool diameter and larger.

Tool diameter tolerance +.0003”, -.0000”.

USE:Center coolant feeding hole for reaming blind holes as chips are Wushed back towards shank.

OPTIONS:Decimal sizes priced below.Cut diam. reduced for step or pilot.End chamfer other than 45˚.End cutting or corner radius.Short shank or undersize shank diam.Flat on shank or tanged shank.


MADE IN USA



CARBIDE TIPPED - FLUTE FEED FOR THROUGH HOLES - STRAIGHT FLUTES

TOOLDIAMETER NO.

OFFLUTES

LENGTH MAX.SHANKDIAM.

TYPE2426

EDP NO.PRICE

SPECIALDECIMAL

SIZE RANGE



ALL1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14*

3⁄16 .1875 4 1 ¼ 5 .1805 242606 $114.95 0.1770 - 0.2040 $149.55 $132.30 $126.45 $123.65 $120.70 $118.3013⁄64 .2031 4 1 ¼ 5 .1805 24262031 114.95 - - - - - - -7⁄32 .2188 4 1 ¼ 5 .2075 242607 114.95 0.2041 - 0.2210 149.55 132.30 126.45 123.65 120.70 118.3015⁄64 .2344 4 1 ½ 6 .2265 24262344 114.95 0.2211 - 0.2380 149.55 132.30 126.45 123.65 120.70 118.30

¼ .2500 4 1 ½ 6 .2405 242608 114.95 0.2381 - 0.2530 149.55 132.30 126.45 123.65 120.70 118.3017⁄64 .2656 4 1 ½ 6 .2485 24262656 117.60 - - - - - - -9⁄32 .2812 4 1 ½ 6 .2485 242609 117.60 0.2531 - 0.2840 152.20 134.85 129.05 126.25 123.30 121.0019⁄64 .2969 4 1 ½ 6 .2792 24262969 127.55 - - - - - - -

5⁄16 .3125 4 1 ½ 6 .2792 242610 127.55 0.2841 - 0.3150 162.20 144.80 139.00 136.25 133.35 130.9521⁄64 .3281 4 1 ½ 6 .2792 24263281 127.55 - - - - - - -11⁄32 .3438 4 1 ½ 6 .2792 242611 127.55 0.3151 - 0.3470 162.20 144.80 139.00 136.25 133.35 130.9523⁄64 .3594 4 1 ¾ 7 .3105 24263594 127.55 - - - - - - -

3⁄8 .3750 4 1 ¾ 7 .3105 242612 127.55 0.3471 - 0.3780 162.20 144.80 139.00 136.25 133.35 130.9525⁄64 .3906 4 1 ¾ 7 .3105 24263906 130.70 - - - - - - -13⁄32 .4062 4 1 ¾ 7 .3105 242613 130.70 0.3781 - 0.4090 165.35 148.05 142.25 139.45 136.55 134.1027⁄64 .4219 6 1 ¾ 7 .3730 24264219 133.90 - - - - - - -

7⁄16 .4375 6 1 ¾ 7 .3730 242614 133.90 0.4091 - 0.4410 168.50 151.20 145.45 142.60 139.70 137.3029⁄64 .4531 6 1 ¾ 7 .3730 24264531 133.90 - - - - - - -15⁄32 .4688 6 1 ¾ 7 .3730 242615 133.90 0.4411 - 0.4720 168.50 151.20 145.45 142.60 139.70 137.3031⁄64 .4844 6 2 8 .4355 24264844 133.90 - - - - - - -

½ .5000 6 2 8 .4355 242616 133.90 0.4721 - 0.5030 168.50 151.20 145.45 142.60 139.70 137.3033⁄64 .5156 6 2 8 .4355 24265156 141.60 - - - - - - -17⁄32 .5312 6 2 8 .4355 242617 141.60 0.5031 - 0.5340 176.20 158.95 153.15 150.35 147.35 145.059⁄16 .5625 6 2 8 .4355 242618 143.65 0.5341 - 0.5660 178.25 160.95 155.10 152.30 149.35 147.00

19⁄32 .5938 6 2 8 .4355 242619 144.95 0.5661 - 0.5970 179.55 162.25 156.45 153.65 150.70 148.355⁄8 .6250 6 2 ¼ 9 .5615 242620 144.95 0.5971 - 0.6280 179.55 162.25 156.45 153.65 150.70 148.35

21⁄32 .6562 6 2 ¼ 9 .5615 242621 160.65 0.6281 - 0.6590 195.35 177.95 172.15 169.40 166.40 164.1011⁄16 .6875 6 2 ¼ 9 .5615 242622 160.65 0.6591 - 0.6910 195.35 177.95 172.15 169.40 166.40 164.10

23⁄32 .7188 6 2 ¼ 9 .5615 242623 171.70 0.6911 - 0.7220 206.35 189.00 183.20 180.45 177.40 175.10¾ .7500 6 2 ½ 9 ½ .6245 242624 171.70 0.7221 - 0.7530 206.35 189.00 183.20 180.45 177.40 175.10

25⁄32 .7812 6 2 ½ 9 ½ .6245 242625 171.70 0.7531 - 0.7840 206.35 189.00 183.20 180.45 177.40 175.1013⁄16 .8125 6 2 ½ 9 ½ .6245 242626 171.70 0.7841 - 0.8160 206.35 189.00 183.20 180.45 177.40 175.10

27⁄32 .8438 6 2 ½ 9 ½ .6245 242627 176.90 0.8161 - 0.8470 211.50 194.20 188.35 185.60 182.65 180.257⁄8 .8750 6 2 5⁄8 10 .7495 242628 183.60 0.8471 - 0.8780 219.55 201.50 195.45 192.60 189.55 187.10

29⁄32 .9062 6 2 5⁄8 10 .7495 242629 206.10 0.8781 - 0.9090 242.00 224.05 218.05 215.15 212.00 209.6515⁄16 .9375 8 2 5⁄8 10 .7495 242630 210.95 0.9091 - 0.9410 246.80 228.85 222.80 219.95 216.80 214.45

31⁄32 .9688 8 2 5⁄8 10 .7495 242631 210.95 0.9411 - 0.9720 246.80 228.85 222.80 219.95 216.80 214.451 1.0000 8 2 ¾ 10 ½ .8745 242632 210.95 0.9721 - 1.0030 246.80 228.85 222.80 219.95 216.80 214.451 1⁄16 1.0625 8 2 ¾ 10 ½ .8745 242634 223.00 1.0031 - 1.0660 259.00 241.05 235.00 232.15 229.05 226.651 1⁄8 1.1250 8 2 7⁄8 11 .8745 242636 224.00 1.0661 - 1.1280 259.95 241.90 235.85 233.00 229.95 227.50

1 3⁄16 1.1875 8 2 7⁄8 11 .9995 242638 233.25 1.1281 - 1.1905 269.20 251.15 245.05 242.30 239.20 236.801 ¼ 1.2500 8 3 11 ½ .9995 242640 236.25 1.1906 - 1.2530 272.25 254.20 248.20 245.35 242.30 239.901 5⁄16 1.3125 8 3 11 ½ .9995 242642 243.05 1.2531 - 1.3155 279.05 260.95 255.00 252.05 249.05 246.601 3⁄8 1.3750 8 3 ¼ 12 .9995 242644 252.90 1.3156 - 1.3780 288.85 270.80 264.85 261.95 258.90 256.40

1 7⁄16 1.4375 8 3 ¼ 12 .9995 242646 260.80 1.3781 - 1.4405 296.80 278.75 272.80 269.90 266.80 264.401 ½ 1.5000 8 3 ½ 12 ½ 1.2495 242648 269.55 1.4406 - 1.5030 305.50 287.50 281.50 278.60 275.55 273.101 9⁄16 1.5625 8 3 ½ 12 ½ 1.2495 242650 303.05 1.5031 - 1.5660 337.30 320.15 314.40 311.70 308.70 306.451 5⁄8 1.6250 8 3 ½ 13 1.2495 242652 333.20 1.5661 - 1.6280 367.45 350.35 344.55 341.85 338.90 336.60

1 11⁄16 1.6875 8 3 ½ 13 1.2495 242654 339.00 1.6281 - 1.6910 373.25 356.10 350.35 347.65 344.65 342.401 ¾ 1.7500 10 3 ½ 13 ½ 1.2495 242656 370.45 1.6911 - 1.7530 404.70 387.60 381.80 379.10 376.15 373.851 13⁄16 1.8125 10 3 ½ 13 ½ 1.4995 242658 385.75 1.7531 - 1.8160 419.95 402.85 397.10 394.35 391.40 389.151 7⁄8 1.8750 10 3 ½ 14 1.4995 242660 406.15 1.8161 - 1.8780 440.40 423.25 417.50 414.80 411.80 409.55

1 15⁄16 1.9375 10 3 ½ 14 1.4995 242662 432.05 1.8781 - 1.9410 466.30 449.20 443.40 440.70 437.75 435.452 2.0000 12 3 ½ 14 1.4995 242664 447.75 1.9411 - 2.0030 482.00 464.85 459.10 456.40 453.40 451.15


TYPE 2426 - COOLANT FEEDING REAMERCoolant feed outlets in each Wute.Flute long carbide on .2841” tool diameter and larger.

Tool diameter tolerance .0003”, -.0000”.

USE:Flute coolant feeding outlets for reaming through holes as chips are Wushed forward through the hole being reamed.


MADE IN USA



CARBIDE TIPPED - CENTER FEED FOR BLIND HOLES -

RIGHT SPIRAL FLUTES

TOOLDIAMETER NO.

OFFLUTES

LENGTH MAXSHANKDIAM.

TYPE 2413EDP NO.

PRICESPECIAL

DECIMALSIZE RANGE


FRAC. DECIMAL FLUTE OVERALL 1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14*

¼ .2500 4 1 ½ 6 .2405 241308 $113.80 .2381 - .2530 $146.05 $129.90 $124.50 $121.90 $119.10 $116.909⁄32 .2812 4 1 ½ 6 .2485 241309 116.40 .2531 - .2840 147.55 131.95 126.70 124.25 121.60 119.405⁄16 .3125 4 1 ½ 6 .2792 241310 127.55 .2841 - .3150 159.85 143.65 138.20 135.65 132.80 130.6511⁄32 .3438 4 1 ½ 6 .2792 241311 128.45 .3151 - .3470 160.80 144.65 139.25 136.65 133.80 131.65

3⁄8 .3750 4 1 ¾ 7 .3105 241312 129.85 .3471 - .3780 162.15 145.90 140.50 137.95 135.25 133.0513⁄32 .4062 4 1 ¾ 7 .3105 241313 130.20 .3781 - .4090 162.50 146.40 140.95 138.35 135.55 133.407⁄16 .4375 6 1 ¾ 7 .3730 241314 131.55 .4091 - .4410 163.90 147.65 142.25 139.70 136.90 134.7515⁄32 .4688 6 1 ¾ 7 .3730 241315 132.70 .4411 - .4720 165.05 148.80 143.45 140.85 138.05 135.90

½ .5000 6 2 8 .4355 241316 137.85 .4721 - .5030 171.05 154.40 148.80 146.15 143.35 141.1517⁄32 .5312 6 2 8 .4355 241317 142.85 .5031 - .5340 176.00 159.35 153.80 151.20 148.35 146.109⁄16 .5625 6 2 8 .4355 241318 142.85 .5341 - .5660 176.00 159.35 153.80 151.20 148.35 146.1019⁄32 .5938 6 2 8 .4355 241319 148.50 .5661 - .5970 181.75 165.10 159.55 156.95 154.05 151.80

5⁄8 .6250 6 2 ¼ 9 .5615 241320 148.50 .5971 - .6280 181.75 165.10 159.55 156.95 154.05 151.8021⁄32 .6562 6 2 ¼ 9 .5615 241321 167.85 .6281 - .6590 201.00 184.45 178.80 176.15 173.30 171.1011⁄16 .6875 6 2 ¼ 9 .5615 241322 167.85 .6591 - .6910 201.00 184.45 178.80 176.15 173.30 171.1023⁄32 .7188 6 2 ¼ 9 .5615 241323 175.10 .6911 - .7220 208.35 191.70 186.15 183.55 180.60 178.35

¾ .7500 6 2 ½ 9 ½ .6245 241324 164.50 .7221 - .7530 195.70 180.05 174.85 172.30 169.65 167.5025⁄32 .7812 6 2 ½ 9 ½ .6245 241325 188.75 .7531 - .7840 221.90 205.25 199.70 197.05 194.20 191.9013⁄16 .8125 6 2 ½ 9 ½ .6245 241326 191.00 .7841 - .8160 224.20 207.55 202.05 199.40 196.60 194.3527⁄32 .8438 6 2 ½ 9 ½ .6245 241327 194.60 .8161 - .8470 227.85 211.20 205.65 202.95 200.15 197.90

7⁄8 .8750 6 2 5⁄8 10 .7495 241328 205.10 .8471 - .8780 239.50 222.35 216.55 213.80 210.80 208.5029⁄32 .9062 6 2 5⁄8 10 .7495 241329 217.30 .8781 - .9090 251.70 234.50 228.75 226.00 222.95 220.7015⁄16 .9375 8 2 5⁄8 10 .7495 241330 227.75 .9091 - .9410 262.20 244.90 239.20 236.40 233.40 231.1031⁄32 .9688 8 2 5⁄8 10 .7495 241331 228.40 .9411 - .9720 262.75 245.55 239.75 237.00 234.05 231.75

1 1.0000 8 2 ¾ 10 ½ .8745 241332 228.75 .9721 - 1.0030 263.15 245.90 240.15 237.40 234.45 232.151 1⁄16 1.0625 8 2 ¾ 10 ½ .8745 241334 235.10 1.0031 - 1.0660 269.50 252.35 246.55 243.75 240.80 238.501 1⁄8 1.1250 8 2 7⁄8 11 .8745 241336 243.25 1.0661 - 1.1280 277.75 260.45 254.70 251.95 249.05 246.701 3⁄16 1.1875 8 2 7⁄8 11 .9995 241338 260.60 1.1281 - 1.1905 295.05 277.85 272.00 269.30 266.25 263.95

1 ¼ 1.2500 8 3 11 ½ .9995 241340 263.95 1.1906 - 1.2530 298.40 281.15 275.40 272.65 269.70 267.401 5⁄16 1.3125 8 3 11 ½ .9995 241342 271.60 1.2531 - 1.3155 306.00 288.75 282.95 280.25 277.30 274.951 3⁄8 1.3750 8 3 ¼ 12 .9995 241344 282.65 1.3156 - 1.3780 317.10 299.80 294.05 291.35 288.30 286.001 7⁄16 1.4375 8 3 ¼ 12 .9995 241346 291.45 1.3781 - 1.4405 325.85 308.60 302.85 300.10 297.10 294.85

1 ½ 1.5000 8 3 ½ 12 ½ 1.2495 241348 301.30 1.4406 - 1.5030 335.70 318.50 312.70 309.90 307.00 304.70

TYPE 2413 - COOLANT FEEDING REAMERCenter coolant outlet.Polished Wutes; Wute long carbide on .2841” tool diameter and larger.Tool diameter tolerance plus .0003”, minus .0000”.

USE:Center coolant outlet for reaming blind holes as chips are Wushed back towards the shank.Improves hole Xnish and permits higher feeds & speeds with longer tool life.

OPTIONS:Decimal sizes priced below.Metric tool diameter.Cutting diameter reduced for step or pilot.End chamfer other than 45°.End cutting or corner radius.Increased/decreased circular margin.Increased/decreased tool diam. back taper.Shortened shank or reduced shank diameter.Flat(s) or tang on shank.


MADE IN USA



CARBIDE TIPPED - FLUTE FEED FOR THROUGH HOLES -

RIGHT SPIRAL FLUTES

TOOLDIAMETER NO.

OFFLUTES


TYPE 2418EDP NO.

PRICESPECIAL

DECIMAL SIZE RANGE


FRAC. DECIMAL 1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14*FLUTE OVERALL

¼ .2500 4 1 ½ 6 .2405 241808 $121.90 .2381 - .2530 $156.50 $139.20 $133.40 $130.60 $127.70 $125.309⁄32 .2812 4 1 ½ 6 .2485 241809 129.30 .2531 - .2840 163.95 146.60 140.75 138.00 135.05 132.705⁄16 .3125 4 1 ½ 6 .2792 241810 136.65 .2841 - .3150 171.25 153.90 148.10 145.40 142.35 140.0511⁄32 .3438 4 1 ½ 6 .2792 241811 137.70 .3151 - .3470 172.30 154.95 149.15 146.45 143.40 141.15

3⁄8 .3750 4 1 ¾ 7 .3105 241812 139.05 .3471 - .3780 173.75 156.35 150.50 147.80 144.80 142.5013⁄32 .4062 4 1 ¾ 7 .3105 241813 139.50 .3781 - .4090 174.10 156.75 151.05 148.25 145.20 142.907⁄16 .4375 6 1 ¾ 7 .3730 241814 140.95 .4091 - .4410 175.60 158.20 152.45 149.60 146.65 144.3515⁄32 .4688 6 1 ¾ 7 .3730 241815 142.25 .4411 - .4720 176.85 159.50 153.65 150.90 147.90 145.60

½ .5000 6 2 8 .4355 241816 143.80 .4721 - .5030 178.40 161.10 155.35 152.55 149.55 147.2517⁄32 .5312 6 2 8 .4355 241817 149.10 .5031 - .5340 183.70 166.30 160.55 157.85 154.75 152.509⁄16 .5625 6 2 8 .4355 241818 149.10 .5341 - .5660 183.70 166.30 160.55 157.85 154.75 152.5019⁄32 .5938 6 2 8 .4355 241819 155.00 .5661 - .5970 189.65 172.30 166.45 163.75 160.70 158.40

5⁄8 .6250 6 2 ¼ 9 .5615 241820 155.00 .5971 - .6280 189.65 172.30 166.45 163.75 160.70 158.4021⁄32 .6562 6 2 ¼ 9 .5615 241821 175.10 .6281 - .6590 209.70 192.45 186.60 183.80 180.85 178.5011⁄16 .6875 6 2 ¼ 9 .5615 241822 175.10 .6591 - .6910 209.70 192.45 186.60 183.80 180.85 178.5023⁄32 .7188 6 2 ¼ 9 .5615 241823 182.75 .6911 - .7220 217.35 200.00 194.30 191.50 188.50 186.15

¾ .7500 6 2 ½ 9 ½ .6245 241824 182.75 .7221 - .7530 217.35 200.00 194.30 191.50 188.50 186.1525⁄32 .7812 6 2 ½ 9 ½ .6245 241825 196.90 .7531 - .7840 231.50 214.15 208.40 205.65 202.65 200.3513⁄16 .8125 6 2 ½ 9 ½ .6245 241826 199.35 .7841 - .8160 233.95 216.60 210.80 208.10 205.05 202.7027⁄32 .8438 6 2 ½ 9 ½ .6245 241827 203.10 .8161 - .8470 237.75 220.35 214.55 211.75 208.80 206.50

7⁄8 .8750 6 2 5⁄8 10 .7495 241828 214.05 .8471 - .8780 250.00 232.00 225.95 223.00 220.00 217.5029⁄32 .9062 6 2 5⁄8 10 .7495 241829 226.75 .8781 - .9090 262.65 244.70 238.65 235.80 232.70 230.3015⁄16 .9375 8 2 5⁄8 10 .7495 241830 237.65 .9091 - .9410 273.60 255.55 249.50 246.70 243.60 241.2031⁄32 .9688 8 2 5⁄8 10 .7495 241831 238.30 .9411 - .9720 274.20 256.25 250.20 247.30 244.20 241.80

1 1.0000 8 2 ¾ 10 ½ .8745 241832 238.65 .9721 - 1.0030 274.65 256.65 250.55 247.70 244.65 242.201 1⁄16 1.0625 8 2 ¾ 10 ½ .8745 241834 275.25 1.0031 - 1.0660 311.15 293.15 287.15 284.25 281.20 278.751 1⁄8 1.1250 8 2 7⁄8 11 .8745 241836 276.45 1.0661 - 1.1280 312.35 294.30 288.30 285.40 282.40 279.951 3⁄16 1.1875 8 2 7⁄8 11 .9995 241838 287.85 1.1281 - 1.1905 323.70 305.70 299.70 296.85 293.80 291.35

1 ¼ 1.2500 8 3 11 ½ .9995 241840 291.60 1.1906 - 1.2530 327.55 309.55 303.55 300.65 297.55 295.151 5⁄16 1.3125 8 3 11 ½ .9995 241842 300.05 1.2531 - 1.3155 335.95 317.95 311.85 309.05 305.95 303.551 3⁄8 1.3750 8 3 ¼ 12 .9995 241844 312.10 1.3156 - 1.3780 348.10 330.10 324.00 321.20 318.10 315.651 7⁄16 1.4375 8 3 ¼ 12 .9995 241846 321.85 1.3781 - 1.4405 357.85 339.80 333.80 330.95 327.90 325.40

1 ½ 1.5000 8 3 ½ 12 ½ 1.2495 241848 332.70 1.4406 - 1.5030 368.60 350.65 344.60 341.70 338.60 336.20

TYPE 2418 - COOLANT FEEDING REAMERCoolant outlets in each Wute.Polished Wutes; Wute long carbide on .2841” tool diameter and larger.Tool diameter tolerance plus .0003”, minus .0000”.

USE:Flute coolant outlets for reaming through holes as chips are Wushed forward through the hole being reamed.Improves hole Xnish and permits higher feeds & speeds with longer tool life.



MADE IN USA



CARBIDE TIPPED - FLUTE FEED FOR THROUGH HOLES -

LEFT SPIRAL FLUTES

TOOLDIAMETER NO.

OFFLUTES


TYPE 2428EDP NO.

PRICESPECIAL

DECIMALSIZE RANGE


FLUTE OVERALLFRAC. DECIMAL 1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14**

¼ .2500 4 1 ½ 6 .2405 242808 $140.95 .2381 - .2530 $175.60 $158.20 $152.45 $149.60 $146.65 $144.359⁄32 .2812 4 1 ½ 6 .2485 242809 149.45 .2531 - .2840 184.05 166.80 161.00 158.20 155.30 152.905⁄16 .3125 4 1 ½ 6 .2792 242810 157.95 .2841 - .3150 192.55 175.15 169.40 166.65 163.60 161.3511⁄32 .3438 4 1 ½ 6 .2792 242811 159.15 .3151 - .3470 193.70 176.35 170.60 167.85 164.90 162.50

3⁄8 .3750 4 1 ¾ 7 .3105 242812 160.70 .3471 - .3780 195.40 178.05 172.25 169.45 166.45 164.2013⁄32 .4062 4 1 ¾ 7 .3105 242813 161.40 .3781 - .4090 196.00 178.70 172.85 170.15 167.10 164.857⁄16 .4375 6 1 ¾ 7 .3730 242814 162.90 .4091 - .4410 197.60 180.20 174.40 171.65 168.75 166.3015⁄32 .4688 6 1 ¾ 7 .3730 242815 164.35 .4411 - .4720 198.95 181.65 175.85 173.10 170.15 167.80

½ .5000 6 2 8 .4355 242816 166.45 .4721 - .5030 201.15 183.75 177.95 175.15 172.25 169.9017⁄32 .5312 6 2 8 .4355 242817 169.95 .5031 - .5340 204.60 187.20 181.45 178.70 175.70 173.359⁄16 .5625 6 2 8 .4355 242818 172.40 .5341 - .5660 207.05 189.70 183.90 181.15 178.15 175.8519⁄32 .5938 6 2 8 .4355 242819 176.00 .5661 - .5970 210.60 193.35 187.50 184.75 181.80 179.45

5⁄8 .6250 6 2 ¼ 9 .5615 242820 179.30 .5971 - .6280 213.90 196.60 190.75 188.00 185.00 182.7021⁄32 .6562 6 2 ¼ 9 .5615 242821 198.55 .6281 - .6590 233.20 215.85 210.05 207.30 204.30 201.9511⁄16 .6875 6 2 ¼ 9 .5615 242822 202.55 .6591 - .6910 237.20 219.90 214.05 211.30 208.35 206.0023⁄32 .7188 6 2 ¼ 9 .5615 242823 206.90 .6911 - .7220 241.50 224.15 218.35 215.60 212.65 210.30

¾ .7500 6 2 ½ 9 ½ .6245 242824 211.30 .7221 - .7530 245.90 228.60 222.75 220.05 217.05 214.7025⁄32 .7812 6 2 ½ 9 ½ .6245 242825 214.90 .7531 - .7840 249.50 232.20 226.35 223.60 220.60 218.3013⁄16 .8125 6 2 ½ 9 ½ .6245 242826 217.50 .7841 - .8160 252.05 234.80 229.00 226.20 223.30 220.9027⁄32 .8438 6 2 ½ 9 ½ .6245 242827 221.50 .8161 - .8470 256.15 238.80 232.95 230.20 227.20 224.90

7⁄8 .8750 6 2 5⁄8 10 .7495 242828 233.50 .8471 - .8780 269.45 251.50 245.40 242.55 239.45 237.0029⁄32 .9062 6 2 5⁄8 10 .7495 242829 247.25 .8781 - .9090 283.20 265.15 259.15 256.30 253.25 250.8015⁄16 .9375 8 2 5⁄8 10 .7495 242830 259.35 .9091 - .9410 295.20 277.25 271.20 268.35 265.20 262.8531⁄32 .9688 8 2 5⁄8 10 .7495 242831 260.00 .9411 - .9720 295.90 277.95 271.85 269.00 265.90 263.45

1 1.0000 8 2 ¾ 10 ½ .8745 242832 260.35 .9721 - 1.0030 296.25 278.30 272.25 269.35 266.25 263.851 1⁄16 1.0625 8 2 ¾ 10 ½ .8745 242834 275.25 1.0031 - 1.0660 311.15 293.15 287.15 284.25 281.20 278.751 1⁄8 1.1250 8 2 7⁄8 11 .8745 242836 276.45 1.0661 - 1.1280 312.35 294.30 288.30 285.40 282.40 279.951 3⁄16 1.1875 8 2 7⁄8 11 .9995 242838 287.85 1.1281 - 1.1905 323.70 305.70 299.70 296.85 293.80 291.35

1 ¼ 1.2500 8 3 11 ½ .9995 242840 291.60 1.1906 - 1.2530 327.55 309.55 303.55 300.65 297.55 295.151 5⁄16 1.3125 8 3 11 ½ .9995 242842 300.05 1.2531 - 1.3155 335.95 317.95 311.85 309.05 305.95 303.551 3⁄8 1.3750 8 3 ¼ 12 .9995 242844 312.10 1.3156 - 1.3780 348.10 330.10 324.00 321.20 318.10 315.651 7⁄16 1.4375 8 3 ¼ 12 .9995 242846 321.85 1.3781 - 1.4405 357.85 339.80 333.80 330.95 327.90 325.40

1 ½ 1.5000 8 3 ½ 12 ½ 1.2495 242848 332.70 1.4406 - 1.5030 368.60 350.65 344.60 341.70 338.60 336.20

TYPE 2428 - COOLANT FEEDING REAMERCoolant outlets in each Wute.Polished Wutes; Wute long carbide on .2841” tool diameter and larger.Left spiral Wutes should not be used on blind holes.Tool diameter tolerance plus .0003”, minus .0000”.

USE:Flute coolant outlets for reaming through holes as chips are Wushed forward through the hole being reamed.Improves hole Xnish and permits higher feeds & speeds with longer tool life.


**Quantities of 15 or more: price of fractional size in same size range.*½” Carbide Length

**

MADE IN USA


CHUCKING REAMERS

CARBIDE TIPPED - STRAIGHT FLUTES & SHANK

ModiXed tool diameters are available up to 50mm - contact us for price.

TOOLDIAMETER

TYPE2400

METRICEDP NO.

METRICPRICE

DIMENSIONSSPECIAL METRIC

SIZE RANGE

PRICE EACH - FINISHED TO METRIC SIZE

SHANKDIAM.

NO. OFFLUTES

LENGTH

1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14 OVER 14mm INCH FLT

CAR-BIDE

OVER-ALL

4.0 .1575 2400040 $47.45 .151 4 1 ½ 4 3.962 -4.493 $71.65 $55.60 $50.15 $47.50 $44.80 $42.50 $39.454.5 .1772 2400045 44.15 11⁄64 4 1 1⁄8 ½ 4 ½ 4.494 -5.182 67.80 52.10 46.85 44.25 41.55 39.40 36.405.0 .1969 2400050 44.15 11⁄64 4 1 1⁄8 ½ 4 ½ - - - - - - - -5.5 .2165 2400055 44.15 13⁄64 4 1 ¼ ½ 5 5.183 -5.613 67.80 52.10 46.85 44.25 41.55 39.40 36.40

6.0 .2362 2400060 46.20 7⁄32 4 1 ½ ½ 6 5.614 -6.045 69.80 54.10 48.80 46.25 43.55 41.40 38.356.3 .2480 2400063 44.15 15⁄64 4 1 ½ ½ 6 6.046 -6.426 67.80 52.10 46.85 44.25 41.55 39.40 36.406.5 .2559 2400065 44.85 15⁄64 4 1 ½ ½ 6 6.427 -7.214 68.55 52.80 47.55 44.95 42.30 40.10 37.107.0 .2756 2400070 44.85 15⁄64 4 1 ½ ½ 6 - - - - - - - -

7.5 .2953 2400075 44.85 9⁄32 4 1 ½ ½ 6 7.215 -8.001 68.55 52.80 47.55 44.95 42.30 40.10 37.108.0 .3150 2400080 44.85 9⁄32 4 1 ½ ½ 6 - - - - - - - -8.5 .3346 2400085 46.00 9⁄32 4 1 ½ 5⁄8 6 8.002 -8.814 69.75 54.05 48.75 46.20 43.50 41.35 38.309.0 .3543 2400090 46.00 5⁄16 4 1 ¾ 5⁄8 7 8.815 -9.601 69.75 54.05 48.75 46.20 43.50 41.35 38.30

9.5 .3740 2400095 46.00 5⁄16 4 1 ¾ 5⁄8 7 - - - - - - - -10.0 .3937 2400100 47.80 5⁄16 4 1 ¾ 5⁄8 7 9.602 -10.389 71.45 55.75 50.45 47.90 45.25 43.10 40.0510.5 .4134 2400105 50.25 3⁄8 4 1 ¾ 5⁄8 7 10.390 -11.201 73.95 58.25 53.00 50.40 47.80 45.60 42.5511.0 .4331 2400110 50.25 3⁄8 4 1 ¾ 5⁄8 7 - - - - - - - -

11.5 .4528 2400115 50.90 3⁄8 4 1 ¾ 5⁄8 7 11.202 -11.989 74.50 58.85 53.55 51.00 48.35 46.20 43.1512.0 .4724 2400120 59.60 7⁄16 6 2 5⁄8 8 11.990 -12.776 85.65 68.35 62.60 59.80 56.85 54.45 51.1012.5 .4921 2400125 59.60 7⁄16 6 2 5⁄8 8 - - - - - - - -13.0 .5118 2400130 63.90 7⁄16 6 2 5⁄8 8 12.777 -13.564 89.90 72.60 66.85 64.00 61.10 58.70 55.35

13.5 .5315 2400135 63.90 7⁄16 6 2 5⁄8 8 - - - - - - - -14.0 .5512 2400140 63.90 7⁄16 6 2 5⁄8 8 13.565 -14.376 89.90 72.60 66.85 64.00 61.10 58.70 55.3514.5 .5709 2400145 65.95 7⁄16 6 2 5⁄8 8 14.377 -15.164 92.05 74.75 68.95 66.10 63.25 60.85 57.4515.0 .5906 2400150 65.95 7⁄16 6 2 5⁄8 8 - - - - - - - -

15.5 .6102 2400155 65.95 9⁄16 6 2 ¼ 5⁄8 9 15.165 -15.951 92.05 74.75 68.95 66.10 63.25 60.85 57.4516.0 .6299 2400160 66.90 9⁄16 6 2 ¼ 5⁄8 9 15.952 -16.739 93.00 75.70 69.85 67.00 64.15 61.70 58.3516.5 .6496 2400165 66.90 9⁄16 6 2 ¼ 5⁄8 9 - - - - - - - -17.0 .6693 2400170 66.90 9⁄16 6 2 ¼ 5⁄8 9 16.740 -17.551 93.00 75.70 69.85 67.00 64.15 61.70 58.35

17.5 .6890 2400175 66.90 9⁄16 6 2 ¼ 5⁄8 9 - - - - - - - -18.0 .7087 2400180 69.50 9⁄16 6 2 ¼ 5⁄8 9 17.552 -18.339 95.55 78.30 72.50 69.70 66.80 64.35 61.0018.5 .7283 2400185 69.50 5⁄8 6 2 ½ ¾ 9 ½ 18.340 -19.126 95.55 78.30 72.50 69.70 66.80 64.35 61.0019.0 .7480 2400190 69.50 5⁄8 6 2 ½ ¾ 9 ½ - - - - - - - -

19.5 .7677 2400195 71.45 5⁄8 6 2 ½ ¾ 9 ½ 19.127 -19.914 97.45 80.25 74.40 71.55 68.70 66.25 62.9520.0 .7874 2400200 71.45 5⁄8 6 2 ½ ¾ 9 ½ 19.915 -20.726 97.45 80.25 74.40 71.55 68.70 66.25 62.9520.5 .8071 2400205 71.45 5⁄8 6 2 ½ ¾ 9 ½ - - - - - - - -21.0 .8268 2400210 73.85 5⁄8 6 2 ½ ¾ 9 ½ 20.727 -21.514 99.90 82.55 76.80 73.95 71.05 68.70 65.35

21.5 .8465 2400215 73.85 5⁄8 6 2 ½ ¾ 9 ½ - - - - - - - -22.0 .8661 2400220 73.85 ¾ 6 2 5⁄8 ¾ 10 21.515 -22.301 99.90 82.55 76.80 73.95 71.05 68.70 65.3522.5 .8858 2400225 87.30 ¾ 6 2 5⁄8 ¾ 10 22.302 -23.089 114.30 96.35 90.35 87.45 84.45 81.95 78.4523.0 .9055 2400230 87.30 ¾ 6 2 5⁄8 ¾ 10 - - - - - - - -

23.5 .9252 2400235 87.30 ¾ 8 2 5⁄8 ¾ 10 23.090 -23.901 114.30 96.35 90.35 87.45 84.45 81.95 78.4524.0 .9449 2400240 91.00 ¾ 8 2 5⁄8 ¾ 10 23.902 -24.689 118.00 100.00 94.00 91.10 88.10 85.60 82.1524.5 .9646 2400245 91.00 ¾ 8 2 5⁄8 ¾ 10 - - - - - - - -25.0 .9843 2400250 91.00 7⁄8 8 2 ¾ ¾ 10 ½ 24.690 -25.476 118.00 100.00 94.00 91.10 88.10 85.60 82.15

25.5 1.0039 2400255 93.10 7⁄8 8 2 ¾ ¾ 10 ½ 25.477 -27.076 119.10 101.85 96.10 93.30 90.40 88.05 84.6526.0 1.0236 2400260 93.10 7⁄8 8 2 ¾ ¾ 10 ½ - - - - - - - -27.0 1.0630 2400270 93.10 7⁄8 8 2 ¾ ¾ 10 ½ - - - - - - - -28.0 1.1024 2400280 99.80 7⁄8 8 2 7⁄8 7⁄8 11 27.077 -28.651 125.65 108.45 102.70 99.90 97.05 94.65 91.30

29.0 1.1417 2400290 104.25 1 8 2 7⁄8 7⁄8 11 28.652 -30.239 130.15 113.05 107.15 104.40 101.50 99.10 95.8030.0 1.1811 2400300 104.25 1 8 2 7⁄8 7⁄8 11 - - - - - - - -31.0 1.2205 2400310 109.60 1 8 3 7⁄8 11 ½ 30.240 -31.826 135.50 118.30 112.55 109.75 106.90 104.50 101.2032.0 1.2598 2400320 114.65 1 8 3 7⁄8 11 ½ 31.827 -33.414 140.60 123.45 117.65 114.85 111.95 109.50 106.15

33.0 1.2992 2400330 114.65 1 8 3 7⁄8 11 ½ - - - - - - - -34.0 1.3386 2400340 121.05 1 8 3 ¼ 7⁄8 12 33.415 -35.001 146.90 129.75 123.95 121.15 118.25 115.85 112.5535.0 1.3780 2400350 121.05 1 8 3 ¼ 7⁄8 12 - - - - - - - -36.0 1.4173 2400360 133.55 1 ¼ 8 3 ¼ 7⁄8 12 35.002 - 36.589 159.50 142.25 136.55 133.65 130.85 128.40 125.10

37.0 1.4567 2400370 140.45 1 ¼ 8 3 ½ 7⁄8 12 ½ 36.590 - 38.176 166.45 149.25 143.45 140.65 137.80 135.35 132.10


TYPE 2400 - METRIC

TOOLDIAMETER NO.

OFFLUTES

LENGTHSHANKDIAM.

TYPE 2400EDP NO.

PRICESPECIAL

DECIMALSIZE RANGE



ALL1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14*

5⁄32 .1562 4 1 4 .151 240005 $36.70 0.1560 - 0.1769 $69.40 $52.80 $47.45 $44.80 $42.05 $39.8511⁄64 .1719 4 1 4 .151 24001719 36.70 - - - - - - -3⁄16 .1875 4 1 1⁄8 4 ½ 11⁄64 240006 33.65 0.1770 - 0.2040 65.10 49.35 44.15 41.55 38.90 36.753⁄16 .1875 4 1 ¼ 5 11⁄64 240086 35.65 0.1770 - 0.2040 67.10 51.35 46.20 43.55 40.90 38.75

13⁄64 .2031 4 1 1⁄8 4 ½ 11⁄64 24002031 35.65 - - - - - - -7⁄32 .2188 4 1 ¼ 5 13⁄64 240007 33.65 0.2041 - 0.2210 65.10 49.35 44.15 41.55 38.90 36.7515⁄64 .2344 4 1 ½ 6 7⁄32 24002344 35.65 0.2211 - 0.2380 67.10 51.35 46.20 43.55 40.90 38.75¼ .2500 4 1 ½ 6 15⁄64 240008 33.65 0.2381 - 0.2530 65.10 49.35 44.15 41.55 38.90 36.75

17⁄64 .2656 4 1 ½ 6 15⁄64 24002656 36.45 - - - - - - -9⁄32 .2812 4 1 ½ 6 15⁄64 240009 34.40 0.2531 - 0.2840 65.85 50.10 44.85 42.30 39.60 37.4519⁄64 .2969 4 1 ½ 6 9⁄32 24002969 36.45 - - - - - - -5⁄16 .3125 4 1 ½ 6 9⁄32 240010 34.40 0.2841 - 0.3150 65.85 50.10 44.85 42.30 39.60 37.45

21⁄64 .3281 4 1 ½ 6 9⁄32 24003281 37.80 - - - - - - -11⁄32 .3438 4 1 ½ 6 9⁄32 240011 35.60 0.3151 - 0.3470 67.05 51.30 46.00 43.50 40.85 38.7023⁄64 .3594 4 1 ¾ 7 5⁄16 24003594 37.80 - - - - - - -3⁄8 .3750 4 1 ¾ 7 5⁄16 240012 35.60 0.3471 - 0.3780 67.05 51.30 46.00 43.50 40.85 38.70

25⁄64 .3906 4 1 ¾ 7 5⁄16 24003906 39.70 - - - - - - -13⁄32 .4062 4 1 ¾ 7 5⁄16 240013 37.35 0.3781 - 0.4090 68.80 53.05 47.80 45.25 42.55 40.4527⁄64 .4219 4 1 ¾ 7 3⁄8 24004219 42.25 - - - - - - -7⁄16 .4375 4 1 ¾ 7 3⁄8 240014 39.90 0.4091 - 0.4410 71.35 55.60 50.25 47.80 45.05 43.00

29⁄64 .4531 4 1 ¾ 7 3⁄8 24004531 42.95 - - - - - - -15⁄32 .4688 4 1 ¾ 7 3⁄8 240015 40.45 0.4411 - 0.4720 71.90 56.15 50.90 48.35 45.65 43.5031⁄64 .4844 6 2 8 7⁄16 24004844 46.40 - - - - - - -½ .5000 6 2 8 7⁄16 240016 48.10 0.4721 - 0.5030 82.75 65.45 59.60 56.85 53.85 51.50

33⁄64 .5156 6 2 8 7⁄16 24005156 52.35 - - - - - - -17⁄32 .5312 6 2 8 7⁄16 240017 52.35 0.5031 - 0.5340 87.05 69.70 63.90 61.10 58.10 55.8035⁄64 .5469 6 2 8 7⁄16 24005469 52.35 - - - - - - -9⁄16 .5625 6 2 8 7⁄16 240018 52.35 0.5341 - 0.5660 87.05 69.70 63.90 61.10 58.10 55.80

37⁄64 .5781 6 2 8 7⁄16 24005781 54.50 - - - - - - -19⁄32 .5938 6 2 8 7⁄16 240019 54.50 0.5661 - 0.5970 89.15 71.75 65.95 63.25 60.20 57.9539⁄64 .6094 6 2 ¼ 9 9⁄16 24006094 54.50 - - - - - - -5⁄8 .6250 6 2 ¼ 9 9⁄16 240020 54.50 0.5971 - 0.6280 89.15 71.75 65.95 63.25 60.20 57.95

41⁄64 .6406 6 2 ¼ 9 9⁄16 24006406 55.45 - - - - - - -21⁄32 .6562 6 2 ¼ 9 9⁄16 240021 55.45 0.6281 - 0.6590 90.05 72.65 66.90 64.15 61.15 58.8543⁄64 .6719 6 2 ¼ 9 9⁄16 24006719 55.45 - - - - - - -11⁄16 .6875 6 2 ¼ 9 9⁄16 240022 55.45 0.6591 - 0.6910 90.05 72.65 66.90 64.15 61.15 58.85

45⁄64 .7031 6 2 ¼ 9 9⁄16 24007031 58.05 - - - - - - -23⁄32 .7188 6 2 ¼ 9 9⁄16 240023 58.05 0.6911 - 0.7220 92.65 75.35 69.50 66.80 63.75 61.5047⁄64 .7344 6 2 ½ 9 ½ 5⁄8 24007344 58.05 - - - - - - -¾ .7500 6 2 ½ 9 ½ 5⁄8 240024 58.05 0.7221 - 0.7530 92.65 75.35 69.50 66.80 63.75 61.50

CHUCKING REAMERS

CARBIDE TIPPED - STRAIGHT POLISHED FLUTES - STRAIGHT SHANK

TYPE 2400 - FINISHED FRACTIONAL SIZESStraight shank and straight polished Wutes.Carbide tips brazed to one piece hardened alloy steelbodies.Cutting diameter tolerance plus .0003”, minus .0000”.

USE:For all general reaming of steel, cast iron, non-ferrousmetals, plastics and non-metals.

OPTIONS:Intermediate decimal sizes (priced as indicated inextended table below).Closer tolerances (see table on next page).Cutting diameter reduced for small steps or pilot.Radius end or end chamfer other than 45˚.End cutting.Rose grind (twice normal back taper).Short shank or undersize shank diameter.Flat on shank or tanged shank.Semi-Xnished type reamers in stock (see page 73).


MADE IN USA


TOOLDIAMETER NO.

OFFLUTES

LENGTHSHANKDIAM.

TYPE 2400EDP NO.

PRICESPECIAL

DECIMALSIZE RANGE



ALL1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14*

49⁄64 .7656 6 2 ½ 9 ½ 5⁄8 24007656 $59.95 - - - - - -25⁄32 .7812 6 2 ½ 9 ½ 5⁄8 240025 59.95 0.7531 - 0.7840 $94.55 $77.20 $71.45 $68.70 $65.70 $63.3551⁄64 .7969 6 2 ½ 9 ½ 5⁄8 24007969 59.95 - - - - - - -13⁄16 .8125 6 2 ½ 9 ½ 5⁄8 240026 59.95 0.7841 - 0.8160 94.55 77.20 71.45 68.70 65.70 63.35

53⁄64 .8281 6 2 ½ 9 ½ 5⁄8 24008281 62.35 - - - - - - -27⁄32 .8438 6 2 ½ 9 ½ 5⁄8 240027 62.35 0.8161 - 0.8470 97.00 79.65 73.85 71.05 68.05 65.7555⁄64 .8594 6 2 5⁄8 10 ¾ 24008594 62.35 - - - - - - -7⁄8 .8750 6 2 5⁄8 10 ¾ 240028 64.70 0.8471 - 0.8780 100.60 82.65 76.65 73.80 70.60 68.20

57⁄64 .8906 6 2 5⁄8 10 ¾ 24008906 75.35 - - - - - - -29⁄32 .9062 6 2 5⁄8 10 ¾ 240029 75.35 0.8781 - 0.9090 111.30 93.30 87.30 84.45 81.30 78.9059⁄64 .9219 8 2 5⁄8 10 ¾ 24009219 75.35 - - - - - - -15⁄16 .9375 8 2 5⁄8 10 ¾ 240030 75.35 0.9091 - 0.9410 111.30 93.30 87.30 84.45 81.30 78.90

61⁄64 .9531 8 2 5⁄8 10 ¾ 24009531 79.00 - - - - - - -31⁄32 .9688 8 2 5⁄8 10 ¾ 240031 79.00 0.9411 - 0.9720 114.95 96.95 91.00 88.10 84.95 82.5563⁄64 .9844 8 2 ¾ 10 ½ 7⁄8 24009844 79.00 - - - - - - -

1 1.0000 8 2 ¾ 10 ½ 7⁄8 240032 79.00 0.9721 - 1.0030 114.95 96.95 91.00 88.10 84.95 82.55

1 1⁄16 1.0625 8 2 ¾ 10 ½ 7⁄8 240034 81.65 1.0031 - 1.0660 116.20 98.95 93.10 90.40 87.45 85.051 1⁄8 1.1250 8 2 7⁄8 11 7⁄8 240036 88.30 1.0661 - 1.1280 122.80 105.50 99.80 97.05 94.00 91.701 3⁄16 1.1875 8 2 7⁄8 11 1 240038 92.85 1.1281 - 1.1905 127.25 110.05 104.25 101.50 98.60 96.201 ¼ 1.2500 8 3 11 ½ 1 240040 98.15 1.1906 - 1.2530 132.65 115.45 109.60 106.90 103.90 101.55

1 5⁄16 1.3125 8 3 11 ½ 1 240042 103.30 1.2531 - 1.3155 137.70 120.45 114.65 111.95 108.95 106.651 3⁄8 1.3750 8 3 ¼ 12 1 240044 109.60 1.3156 - 1.3780 144.00 126.80 121.05 118.25 115.35 113.051 7⁄16 1.4375 8 3 ¼ 12 1 ¼ 240046 122.10 1.3781 - 1.4405 156.60 139.35 133.55 130.85 127.85 125.501 ½ 1.5000 8 3 ½ 12 ½ 1 ¼ 240048 129.10 1.4406 - 1.5030 163.50 146.30 140.45 137.80 134.80 132.45

1 9⁄16 1.5625 8 3 ½ 12 ½ 1 ¼ 240050 191.75 1.5031 - 1.5660 226.15 208.95 203.20 200.40 197.50 195.151 5⁄8 1.6250 8 3 ¾ 13 1 ¼ 240052 198.35 1.5661 - 1.6280 232.70 215.50 209.70 206.95 204.00 201.651 11⁄16 1.6875 8 3 ¾ 13 1 ¼ 240054 223.00 1.6281 - 1.6910 257.55 240.30 234.50 231.75 228.85 226.501 ¾ 1.7500 10 4 13 ½ 1 ¼ 240056 223.00 1.6911 - 1.7530 257.55 240.30 234.50 231.75 228.85 226.50

1 13⁄16 1.8125 10 4 13 ½ 1 ½ 240058 223.00 1.7531 - 1.8160 257.55 240.30 234.50 231.75 228.85 226.501 7⁄8 1.8750 10 4 ¼ 14 1 ½ 240060 233.75 1.8161 - 1.8780 268.15 250.90 245.05 242.35 239.40 237.051 15⁄16 1.9375 10 4 ¼ 14 1 ½ 240062 233.75 1.8781 - 1.9410 268.15 250.90 245.05 242.35 239.40 237.052 2.0000 12 4 ¼ 14 1 ½ 240064 233.75 1.9411 - 2.0030 268.15 250.90 245.05 242.35 239.40 237.05

TOOLDIAMETER

SHANKDIAM.

OVERALLLENGTH

NO. OF FLUTES

TYPE 2478EDP NO.

PRICE

.1865 11⁄64 4 ½ 4 247818 $42.35

.1885 11⁄64 4 ½ 4 247819 42.35

.2490 15⁄64 6 4 247824 42.35

.2510 15⁄64 6 4 247825 42.35

.3115 9⁄32 6 4 247831 43.30

.3135 9⁄32 6 4 247832 43.30

.3740 5⁄16 7 4 247837 44.90

.3760 5⁄16 7 4 247838 44.90

.4365 3⁄8 7 4 247843 50.20

.4385 3⁄8 7 4 247844 50.20

.4990 7⁄16 8 6 247849 55.00

.5010 7⁄16 8 6 247850 55.00

.6240 9⁄16 9 6 247862 65.95

.6260 9⁄16 9 6 247863 65.95

.7490 5⁄8 9 ½ 6 247874 69.50

.7510 5⁄8 9 ½ 6 247875 69.50

.8740 ¾ 10 6 247886 73.85

.8760 ¾ 10 6 247887 76.65

.9990 7⁄8 10 ½ 8 247898 91.051.0010 7⁄8 10 ½ 8 247899 87.25

TOOLDIAMETER

SHANKDIAM.

OVERALLLENGTH

NO. OF FLUTES

TYPE 2476EDP NO.

PRICE

.1855 11⁄64 4 ½ 4 247617 $42.35

.1870 11⁄64 4 ½ 4 247618 42.35

.2480 15⁄64 6 4 247623 42.35

.2495 15⁄64 6 4 247624 42.35

.3105 9⁄32 6 4 247630 43.30

.3120 9⁄32 6 4 247631 43.30

.3730 5⁄16 7 4 247636 44.90

.3745 5⁄16 7 4 247637 44.90

.4355 3⁄8 7 4 247642 50.20

.4370 3⁄8 7 4 247643 50.20

.4980 7⁄16 8 6 247648 55.00

.4995 7⁄16 8 6 247649 55.00

CASED SET OF ABOVE 12 REAMERS 247600 $528.50

CARBIDE TIPPED

DOWEL PIN SIZE REAMERS

CARBIDE TIPPED

OVER & UNDER SIZE REAMERS

CONTINUED FROM PREVIOUS PAGE

*Quantities of 15 or more: price of fractional size in same size range.EXACT DECIMAL SIZE REAMERS - For + .0002” tolerance add $1.00 per tool. For + .0001” tolerance add $3.00 per tool.

TYPE 2476 - STRAIGHT FLUTE & SHANKCutting diameter tolerance plus .0000” minus .0002”.

USE:These precision ground carbide tipped reamers accurately Xnish dowel pin holes in most materials and result in properly Xtted dowel pins subjected to shearing strain - assuring accurate alignment. Should be used in pairs of .0005” and .0020” under fraction size — Note special minus .0002” tolerance.


USE:These precision ground carbide tipped reamers are very convenient for Xnishing accurate holes in most materials.


TOOLDIAM.

EDP NO.

PRICE

.1560 24001560 $47.45

.1565 24001565 47.45

.1570 24001570 47.45

.1575 2400040 47.45

.1580 24001580 47.45

.1585 24001585 47.45

.1590 24001590 47.45

.1595 24001595 47.45

.1600 24001600 47.45

.1605 24001605 47.45

.1610 24001610 47.45

.1615 24001615 47.45

.1620 24001620 47.45

.1625 24001625 47.45

.1630 24001630 47.45

.1635 24001635 47.45

.1640 24001640 47.45

.1645 24001645 47.45

.1650 24001650 47.45

.1655 24001655 47.45

.1660 24001660 47.45

.1665 24001665 47.45

.1670 24001670 47.45

.1675 24001675 47.45

.1680 24001680 47.45

.1685 24001685 47.45

.1690 24001690 47.45

.1695 24001695 47.45

.1700 24001700 47.45

.1705 24001705 47.45

.1710 24001710 47.45

.1715 24001715 47.45

.1720 24001720 47.45

.1725 24001725 47.45

.1730 24001730 47.45

.1735 24001735 47.45

.1740 24001740 47.45

.1745 24001745 47.45

.1750 24001750 47.45

.1755 24001755 47.45

.1760 24001760 47.45

.1765 24001765 47.45

.1770 24001770 44.15

.1775 24001775 44.15

.1780 24001780 44.15

.1785 24001785 44.15

.1790 24001790 44.15

.1795 24001795 44.15

.1800 24001800 44.15

.1805 24001805 44.15

.1810 24001810 44.15

.1815 24001815 44.15

.1820 24001820 44.15

.1825 24001825 44.15

.1830 24001830 44.15

.1835 24001835 44.15

.1840 24001840 44.15

.1845 24001845 44.15

.1850 2400047 44.15

.1855 24001855 44.15

TOOLDIAM.

EDP NO.

PRICE

.2760 24002760 $44.85

.2765 24002765 44.85

.2770 24002770 44.85

.2775 24002775 44.85

.2780 24002780 44.85

.2785 24002785 44.85

.2790 24002790 44.85

.2795 2400071 44.85

.2800 24002800 44.85

.2805 24002805 44.85

.2810 24002810 44.85

.2815 24002815 44.85

.2820 24002820 44.85

.2825 24002825 44.85

.2830 24002830 44.85

.2835 2400072 44.85

.2840 24002840 44.85

.2845 24002845 44.85

.2850 24002850 44.85

.2855 24002855 44.85

.2860 24002860 44.85

.2865 24002865 44.85

.2870 24002870 44.85

.2875 24002875 44.85

.2880 24002880 44.85

.2885 24002885 44.85

.2890 24002890 44.85

.2895 24002895 44.85

.2900 24002900 44.85

.2905 24002905 44.85

.2910 24002910 44.85

.2915 24002915 44.85

.2920 24002920 44.85

.2925 24002925 44.85

.2930 24002930 44.85

.2935 24002935 44.85

.2940 24002940 44.85

.2945 24002945 44.85

.2950 24002950 44.85

.2955 24002955 44.85

.2960 24002960 44.85

.2965 24002965 44.85

.2970 24002970 44.85

.2975 24002975 44.85

.2980 24002980 44.85

.2985 24002985 44.85

.2990 24002990 44.85

.2995 24002995 44.85

.3000 24003000 44.85

.3005 24003005 44.85

.3010 24003010 44.85

.3015 24003015 44.85

.3020 24003020 44.85

.3025 24003025 44.85

.3030 24003030 44.85

.3035 24003035 44.85

.3040 24003040 44.85

.3045 24003045 44.85

.3050 24003050 44.85

.3055 24003055 44.85

TOOLDIAM.

EDP NO.

PRICE

.1860 24001860 $44.15

.1865 247818 42.35

.1870 24001870 44.15

.1875 240006 33.65

.1880 24001880 44.15

.1885 247819 42.35

.1890 2400048 44.15

.1895 24001895 44.15

.1900 24001900 44.15

.1905 24001905 44.15

.1910 24001910 44.15

.1915 24001915 44.15

.1920 24001920 44.15

.1925 24001925 44.15

.1930 24001930 44.15

.1935 24001935 44.15

.1940 24001940 44.15

.1945 24001945 44.15

.1950 24001950 44.15

.1955 24001955 44.15

.1960 24001960 44.15

.1965 24001965 44.15

.1970 24001970 44.15

.1975 24001975 44.15

.1980 24001980 44.15

.1985 24001985 44.15

.1990 24001990 44.15

.1995 24001995 44.15

.2000 24002000 44.15

.2005 24002005 44.15

.2010 24002010 44.15

.2015 24002015 44.15

.2020 24002020 44.15

.2025 24002025 44.15

.2030 24002030 44.15

.2035 24002035 44.15

.2040 24002040 44.15

.2045 24002045 44.15

.2050 24002050 44.15

.2055 24002055 44.15

.2060 24002060 44.15

.2065 24002065 44.15

.2070 24002070 44.15

.2075 24002075 44.15

.2080 24002080 44.15

.2085 24002085 44.15

.2090 24002090 44.15

.2095 24002095 44.15

.2100 24002100 44.15

.2105 24002105 44.15

.2110 24002110 44.15

.2115 24002115 44.15

.2120 24002120 44.15

.2125 24002125 44.15

.2130 24002130 44.15

.2135 24002135 44.15

.2140 24002140 44.15

.2145 24002145 44.15

.2150 24002150 44.15

.2155 24002155 44.15

TOOLDIAM.

EDP NO.

PRICE

.2160 24002160 $44.15

.2165 2400055 44.15

.2170 24002170 44.15

.2175 24002175 44.15

.2180 24002180 44.15

.2185 24002185 44.15

.2190 24002190 44.15

.2195 24002195 44.15

.2200 24002200 44.15

.2205 2400056 44.15

.2210 24002210 44.15

.2215 24002215 46.20

.2220 24002220 46.20

.2225 24002225 46.20

.2230 24002230 46.20

.2235 24002235 46.20

.2240 24002240 46.20

.2245 24002245 46.20

.2250 24002250 46.20

.2255 24002255 46.20

.2260 24002260 46.20

.2265 24002265 46.20

.2270 24002270 46.20

.2275 24002275 46.20

.2280 24002280 46.20

.2285 24002285 46.20

.2290 24002290 46.20

.2295 24002295 46.20

.2300 24002300 46.20

.2305 24002305 46.20

.2310 24002310 46.20

.2315 24002315 46.20

.2320 24002320 46.20

.2325 24002325 46.20

.2330 24002330 46.20

.2335 24002335 46.20

.2340 24002340 46.20

.2345 24002345 46.20

.2350 24002350 46.20

.2355 24002355 46.20

.2360 24002360 46.20

.2365 24002365 46.20

.2370 24002370 46.20

.2375 24002375 46.20

.2380 24002380 46.20

.2385 24002385 44.15

.2390 24002390 44.15

.2395 24002395 44.15

.2400 24002400 44.15

.2405 24002405 44.15

.2410 24002410 44.15

.2415 24002415 44.15

.2420 24002420 44.15

.2425 24002425 44.15

.2430 24002430 44.15

.2435 24002435 44.15

.2440 24002440 44.15

.2445 24002445 44.15

.2450 24002450 44.15

.2455 24002455 44.15

TOOLDIAM.

EDP NO.

PRICE

.2460 24002460 $44.15

.2465 24002465 44.15

.2470 24002470 44.15

.2475 24002475 44.15

.2480 2400063 44.15

.2485 24002485 44.15

.2490 247824 42.35

.2495 24002495 44.15

.2500 240008 33.65

.2505 24002505 44.15

.2510 247825 42.35

.2515 24002515 44.15

.2520 2400064 44.15

.2525 24002525 44.15

.2530 24002530 44.15

.2535 24002535 44.85

.2540 24002540 44.85

.2545 24002545 44.85

.2550 24002550 44.85

.2555 24002555 44.85

.2560 24002560 44.85

.2565 24002565 44.85

.2570 24002570 44.85

.2575 24002575 44.85

.2580 24002580 44.85

.2585 24002585 44.85

.2590 24002590 44.85

.2595 24002595 44.85

.2600 24002600 44.85

.2605 24002605 44.85

.2610 24002610 44.85

.2615 24002615 44.85

.2620 24002620 44.85

.2625 24002625 44.85

.2630 24002630 44.85

.2635 24002635 44.85

.2640 24002640 44.85

.2645 24002645 44.85

.2650 24002650 44.85

.2655 24002655 44.85

.2660 24002660 44.85

.2665 24002665 44.85

.2670 24002670 44.85

.2675 24002675 44.85

.2680 24002680 44.85

.2685 24002685 44.85

.2690 24002690 44.85

.2695 24002695 44.85

.2700 24002700 44.85

.2705 24002705 44.85

.2710 24002710 44.85

.2715 24002715 44.85

.2720 24002720 44.85

.2725 24002725 44.85

.2730 24002730 44.85

.2735 24002735 44.85

.2740 24002740 44.85

.2745 24002745 44.85

.2750 24002750 44.85

.2755 24002755 44.85

CHUCKING REAMERS

CARBIDE TIPPED - STOCKED - SPECIAL DECIMAL SIZES - TYPE 2400

NOTE: Dimension details and modiXcations listed on page 42.

MADE IN USA


TOOLDIAM.

EDP NO.

PRICE

.3060 24003060 $44.85

.3065 24003065 44.85

.3070 24003070 44.85

.3075 24003075 44.85

.3080 24003080 44.85

.3085 24003085 44.85

.3090 24003090 44.85

.3095 24003095 44.85

.3100 24003100 44.85

.3105 24003105 44.85

.3110 2400079 44.85

.3115 247831 43.30

.3120 24003120 44.85

.3125 240010 34.40

.3130 24003130 44.85

.3135 247832 43.30

.3140 24003140 44.85

.3145 24003145 44.85

.3150 2400080 44.85

.3155 24003155 46.00

.3160 24003160 46.00

.3165 24003165 46.00

.3170 24003170 46.00

.3175 24003175 46.00

.3180 24003180 46.00

.3185 24003185 46.00

.3190 24003190 46.00

.3195 24003195 46.00

.3200 24003200 46.00

.3205 24003205 46.00

.3210 24003210 46.00

.3215 24003215 46.00

.3220 24003220 46.00

.3225 24003225 46.00

.3230 24003230 46.00

.3235 24003235 46.00

.3240 24003240 46.00

.3245 24003245 46.00

.3250 24003250 46.00

.3255 24003255 46.00

.3260 24003260 46.00

.3265 24003265 46.00

.3270 24003270 46.00

.3275 24003275 46.00

.3280 24003280 46.00

.3285 24003285 46.00

.3290 24003290 46.00

.3295 24003295 46.00

.3300 24003300 46.00

.3305 24003305 46.00

.3310 24003310 46.00

.3315 24003315 46.00

.3320 24003320 46.00

.3325 24003325 46.00

.3330 24003330 46.00

.3335 24003335 46.00

.3340 24003340 46.00

.3345 24003345 46.00

.3350 24003350 46.00

.3355 24003355 46.00

TOOLDIAM.

EDP NO.

PRICE

.4260 24004260 $50.25

.4265 24004265 50.25

.4270 24004270 50.25

.4275 24004275 50.25

.4280 24004280 50.25

.4285 24004285 50.25

.4290 24004290 50.25

.4295 24004295 50.25

.4300 24004300 50.25

.4305 24004305 50.25

.4310 24004310 50.25

.4315 24004315 50.25

.4320 24004320 50.25

.4325 24004325 50.25

.4330 24004330 50.25

.4335 24004335 50.25

.4340 24004340 50.25

.4345 24004345 50.25

.4350 24004350 50.25

.4355 24004355 50.25

.4360 24004360 50.25

.4365 247843 50.20

.4370 2400111 50.25

.4375 240014 39.90

.4380 24004380 50.25

.4385 247844 50.20

.4390 24004390 50.25

.4395 24004395 50.25

.4400 24004400 50.25

.4405 24004405 50.25

.4410 24004410 50.25

.4415 24004415 50.90

.4420 24004420 50.90

.4425 24004425 50.90

.4430 24004430 50.90

.4435 24004435 50.90

.4440 24004440 50.90

.4445 24004445 50.90

.4450 24004450 50.90

.4455 24004455 50.90

.4460 24004460 50.90

.4465 24004465 50.90

.4470 24004470 50.90

.4475 24004475 50.90

.4480 24004480 50.90

.4485 24004485 50.90

.4490 24004490 50.90

.4495 24004495 50.90

.4500 24004500 50.90

.4505 24004505 50.90

.4510 24004510 50.90

.4515 24004515 50.90

.4520 24004520 50.90

.4525 24004525 50.90

.4530 24004530 50.90

.4535 24004535 50.90

.4540 24004540 50.90

.4545 24004545 50.90

.4550 24004550 50.90

.4555 24004555 50.90

TOOLDIAM.

EDP NO.

PRICE

.3360 24003360 $46.00

.3365 24003365 46.00

.3370 24003370 46.00

.3375 24003375 46.00

.3380 24003380 46.00

.3385 24003385 46.00

.3390 24003390 46.00

.3395 24003395 46.00

.3400 24003400 46.00

.3405 24003405 46.00

.3410 24003410 46.00

.3415 24003415 46.00

.3420 24003420 46.00

.3425 2400087 46.00

.3430 24003430 46.00

.3435 24003435 46.00

.3440 24003440 46.00

.3445 24003445 46.00

.3450 24003450 46.00

.3455 24003455 46.00

.3460 24003460 46.00

.3465 2400088 46.00

.3470 24003470 46.00

.3475 24003475 46.00

.3480 24003480 46.00

.3485 24003485 46.00

.3490 24003490 46.00

.3495 24003495 46.00

.3500 24003500 46.00

.3505 24003505 46.00

.3510 24003510 46.00

.3515 24003515 46.00

.3520 24003520 46.00

.3525 24003525 46.00

.3530 24003530 46.00

.3535 24003535 46.00

.3540 24003540 46.00

.3545 24003545 46.00

.3550 24003550 46.00

.3555 24003555 46.00

.3560 24003560 46.00

.3565 24003565 46.00

.3570 24003570 46.00

.3575 24003575 46.00

.3580 24003580 46.00

.3585 24003585 46.00

.3590 24003590 46.00

.3595 24003595 46.00

.3600 24003600 46.00

.3605 24003605 46.00

.3610 24003610 46.00

.3615 24003615 46.00

.3620 24003620 46.00

.3625 24003625 46.00

.3630 24003630 46.00

.3635 24003635 46.00

.3640 24003640 46.00

.3645 24003645 46.00

.3650 24003650 46.00

.3655 24003655 46.00

TOOLDIAM.

EDP NO.

PRICE

.3660 24003660 $46.00

.3665 24003665 46.00

.3670 24003670 46.00

.3675 24003675 46.00

.3680 24003680 46.00

.3685 24003685 46.00

.3690 24003690 46.00

.3695 24003695 46.00

.3700 24003700 46.00

.3705 24003705 46.00

.3710 24003710 46.00

.3715 24003715 46.00

.3720 24003720 46.00

.3725 24003725 46.00

.3730 24003730 46.00

.3735 24003735 46.00

.3740 247837 44.90

.3745 24003745 46.00

.3750 240012 35.60

.3755 24003755 46.00

.3760 247838 44.90

.3765 24003765 46.00

.3770 24003770 46.00

.3775 24003775 46.00

.3780 2400096 46.00

.3785 24003785 47.80

.3790 24003790 47.80

.3795 24003795 47.80

.3800 24003800 47.80

.3805 24003805 47.80

.3810 24003810 47.80

.3815 24003815 47.80

.3820 24003820 47.80

.3825 24003825 47.80

.3830 24003830 47.80

.3835 24003835 47.80

.3840 24003840 47.80

.3845 24003845 47.80

.3850 24003850 47.80

.3855 24003855 47.80

.3860 24003860 47.80

.3865 24003865 47.80

.3870 24003870 47.80

.3875 24003875 47.80

.3880 24003880 47.80

.3885 24003885 47.80

.3890 24003890 47.80

.3895 24003895 47.80

.3900 24003900 47.80

.3905 24003905 47.80

.3910 24003910 47.80

.3915 24003915 47.80

.3920 24003920 47.80

.3925 24003925 47.80

.3930 24003930 47.80

.3935 24003935 47.80

.3940 24003940 47.80

.3945 24003945 47.80

.3950 24003950 47.80

.3955 24003955 47.80

TOOLDIAM.

EDP NO.

PRICE

.3960 24003960 $47.80

.3965 24003965 47.80

.3970 24003970 47.80

.3975 24003975 47.80

.3980 24003980 47.80

.3985 24003985 47.80

.3990 24003990 47.80

.3995 24003995 47.80

.4000 24004000 47.80

.4005 24004005 47.80

.4010 24004010 47.80

.4015 24004015 47.80

.4020 24004020 47.80

.4025 24004025 47.80

.4030 24004030 47.80

.4035 24004035 47.80

.4040 24004040 47.80

.4045 24004045 47.80

.4050 24004050 47.80

.4055 2400103 47.80

.4060 24004060 47.80

.4065 24004065 47.80

.4070 24004070 47.80

.4075 24004075 47.80

.4080 24004080 47.80

.4085 24004085 47.80

.4090 24004090 47.80

.4095 24004095 50.25

.4100 24004100 50.25

.4105 24004105 50.25

.4110 24004110 50.25

.4115 24004115 50.25

.4120 24004120 50.25

.4125 24004125 50.25

.4130 24004130 50.25

.4135 24004135 50.25

.4140 24004140 50.25

.4145 24004145 50.25

.4150 24004150 50.25

.4155 24004155 50.25

.4160 24004160 50.25

.4165 24004165 50.25

.4170 24004170 50.25

.4175 24004175 50.25

.4180 24004180 50.25

.4185 24004185 50.25

.4190 24004190 50.25

.4195 24004195 50.25

.4200 24004200 50.25

.4205 24004205 50.25

.4210 24004210 50.25

.4215 24004215 50.25

.4220 24004220 50.25

.4225 24004225 50.25

.4230 24004230 50.25

.4235 24004235 50.25

.4240 24004240 50.25

.4245 24004245 50.25

.4250 24004250 50.25

.4255 24004255 50.25


CHUCKING REAMERS


MADE IN USA


TOOLDIAM.

EDP NO.

PRICE

.4560 24004560 $50.90

.4565 24004565 50.90

.4570 24004570 50.90

.4575 24004575 50.90

.4580 24004580 50.90

.4585 24004585 50.90

.4590 24004590 50.90

.4595 24004595 50.90

.4600 24004600 50.90

.4605 24004605 50.90

.4610 24004610 50.90

.4615 24004615 50.90

.4620 24004620 50.90

.4625 24004625 50.90

.4630 24004630 50.90

.4635 24004635 50.90

.4640 24004640 50.90

.4645 24004645 50.90

.4650 24004650 50.90

.4655 24004655 50.90

.4660 24004660 50.90

.4665 24004665 50.90

.4670 24004670 50.90

.4675 24004675 50.90

.4680 24004680 50.90

.4685 2400119 50.90

.4690 24004690 50.90

.4695 24004695 50.90

.4700 24004700 50.90

.4705 24004705 50.90

.4710 24004710 50.90

.4715 24004715 50.90

.4720 24004720 50.90

.4725 24004725 59.60

.4730 24004730 59.60

.4735 24004735 59.60

.4740 24004740 59.60

.4745 24004745 59.60

.4750 24004750 59.60

.4755 24004755 59.60

.4760 24004760 59.60

.4765 24004765 59.60

.4770 24004770 59.60

.4775 24004775 59.60

.4780 24004780 59.60

.4785 24004785 59.60

.4790 24004790 59.60

.4795 24004795 59.60

.4800 24004800 59.60

.4805 24004805 59.60

.4810 24004810 59.60

.4815 24004815 59.60

.4820 24004820 59.60

.4825 24004825 59.60

.4830 24004830 59.60

.4835 24004835 59.60

.4840 24004840 59.60

.4845 24004845 59.60

.4850 24004850 59.60

.4855 24004855 59.60

TOOLDIAM.

EDP NO.

PRICE

.5760 24005760 $65.95

.5765 24005765 65.95

.5770 24005770 65.95

.5775 24005775 65.95

.5780 24005780 65.95

.5785 24005785 65.95

.5790 24005790 65.95

.5795 24005795 65.95

.5800 24005800 65.95

.5805 24005805 65.95

.5810 24005810 65.95

.5815 24005815 65.95

.5820 24005820 65.95

.5825 24005825 65.95

.5830 24005830 65.95

.5835 24005835 65.95

.5840 24005840 65.95

.5845 24005845 65.95

.5850 24005850 65.95

.5855 24005855 65.95

.5860 24005860 65.95

.5865 24005865 65.95

.5870 24005870 65.95

.5875 24005875 65.95

.5880 24005880 65.95

.5885 24005885 65.95

.5890 24005890 65.95

.5895 24005895 65.95

.5900 24005900 65.95

.5905 24005905 65.95

.5910 24005910 65.95

.5915 24005915 65.95

.5920 24005920 65.95

.5925 24005925 65.95

.5930 24005930 65.95

.5935 24005935 65.95

.5940 24005940 65.95

.5945 2400151 65.95

.5950 24005950 65.95

.5955 24005955 65.95

.5960 24005960 65.95

.5965 24005965 65.95

.5970 24005970 65.95

.5975 24005975 65.95

.5980 24005980 65.95

.5985 24005985 65.95

.5990 24005990 65.95

.5995 24005995 65.95

.6000 24006000 65.95

.6005 24006005 65.95

.6010 24006010 65.95

.6015 24006015 65.95

.6020 24006020 65.95

.6025 24006025 65.95

.6030 24006030 65.95

.6035 24006035 65.95

.6040 24006040 65.95

.6045 24006045 65.95

.6050 24006050 65.95

.6055 24006055 65.95

TOOLDIAM.

EDP NO.

PRICE

.4860 24004860 $59.60

.4865 24004865 59.60

.4870 24004870 59.60

.4875 24004875 59.60

.4880 24004880 59.60

.4885 24004885 59.60

.4890 24004890 59.60

.4895 24004895 59.60

.4900 24004900 59.60

.4905 24004905 59.60

.4910 24004910 59.60

.4915 24004915 59.60

.4920 24004920 59.60

.4925 24004925 59.60

.4930 24004930 59.60

.4935 24004935 59.60

.4940 24004940 59.60

.4945 24004945 59.60

.4950 24004950 59.60

.4955 24004955 59.60

.4960 24004960 59.60

.4965 24004965 59.60

.4970 24004970 59.60

.4975 24004975 59.60

.4980 24004980 59.60

.4985 24004985 59.60

.4990 247849 55.00

.4995 24004995 59.60

.5000 240016 48.10

.5005 24005005 59.60

.5010 247850 55.00

.5015 24005015 59.60

.5020 24005020 59.60

.5025 24005025 59.60

.5030 24005030 59.60

.5035 24005035 63.90

.5040 24005040 63.90

.5045 24005045 63.90

.5050 24005050 63.90

.5055 24005055 63.90

.5060 24005060 63.90

.5065 24005065 63.90

.5070 24005070 63.90

.5075 24005075 63.90

.5080 24005080 63.90

.5085 24005085 63.90

.5090 24005090 63.90

.5095 24005095 63.90

.5100 24005100 63.90

.5105 24005105 63.90

.5110 24005110 63.90

.5115 24005115 63.90

.5120 24005120 63.90

.5125 24005125 63.90

.5130 24005130 63.90

.5135 24005135 63.90

.5140 24005140 63.90

.5145 24005145 63.90

.5150 24005150 63.90

.5155 24005155 63.90

TOOLDIAM.

EDP NO.

PRICE

.5160 24005160 $63.90

.5165 24005165 63.90

.5170 24005170 63.90

.5175 24005175 63.90

.5180 24005180 63.90

.5185 24005185 63.90

.5190 24005190 63.90

.5195 24005195 63.90

.5200 24005200 63.90

.5205 24005205 63.90

.5210 24005210 63.90

.5215 24005215 63.90

.5220 24005220 63.90

.5225 24005225 63.90

.5230 24005230 63.90

.5235 24005235 63.90

.5240 24005240 63.90

.5245 24005245 63.90

.5250 24005250 63.90

.5255 24005255 63.90

.5260 24005260 63.90

.5265 24005265 63.90

.5270 24005270 63.90

.5275 24005275 63.90

.5280 24005280 63.90

.5285 24005285 63.90

.5290 24005290 63.90

.5295 24005295 63.90

.5300 24005300 63.90

.5305 24005305 63.90

.5310 24005310 63.90

.5315 2400135 63.90

.5320 24005320 63.90

.5325 24005325 63.90

.5330 24005330 63.90

.5335 24005335 63.90

.5340 24005340 63.90

.5345 24005345 63.90

.5350 24005350 63.90

.5355 24005355 63.90

.5360 24005360 63.90

.5365 24005365 63.90

.5370 24005370 63.90

.5375 24005375 63.90

.5380 24005380 63.90

.5385 24005385 63.90

.5390 24005390 63.90

.5395 24005395 63.90

.5400 24005400 63.90

.5405 24005405 63.90

.5410 24005410 63.90

.5415 24005415 63.90

.5420 24005420 63.90

.5425 24005425 63.90

.5430 24005430 63.90

.5435 24005435 63.90

.5440 24005440 63.90

.5445 24005445 63.90

.5450 24005450 63.90

.5455 24005455 63.90

TOOLDIAM.

EDP NO.

PRICE

.5460 24005460 $63.90

.5465 24005465 63.90

.5470 24005470 63.90

.5475 24005475 63.90

.5480 24005480 63.90

.5485 24005485 63.90

.5490 24005490 63.90

.5495 24005495 63.90

.5500 24005500 63.90

.5505 24005505 63.90

.5510 24005510 63.90

.5515 24005515 63.90

.5520 24005520 63.90

.5525 24005525 63.90

.5530 24005530 63.90

.5535 24005535 63.90

.5540 24005540 63.90

.5545 24005545 63.90

.5550 24005550 63.90

.5555 24005555 63.90

.5560 24005560 63.90

.5565 24005565 63.90

.5570 24005570 63.90

.5575 24005575 63.90

.5580 24005580 63.90

.5585 24005585 63.90

.5590 24005590 63.90

.5595 24005595 63.90

.5600 24005600 63.90

.5605 24005605 63.90

.5610 24005610 63.90

.5615 24005615 63.90

.5620 24005620 63.90

.5625 240018 52.35

.5630 2400143 63.90

.5635 24005635 63.90

.5640 24005640 63.90

.5645 24005645 63.90

.5650 24005650 63.90

.5655 24005655 63.90

.5660 24005660 63.90

.5665 24005665 65.95

.5670 24005670 65.95

.5675 24005675 65.95

.5680 24005680 65.95

.5685 24005685 65.95

.5690 24005690 65.95

.5695 24005695 65.95

.5700 24005700 65.95

.5705 24005705 65.95

.5710 24005710 65.95

.5715 24005715 65.95

.5720 24005720 65.95

.5725 24005725 65.95

.5730 24005730 65.95

.5735 24005735 65.95

.5740 24005740 65.95

.5745 24005745 65.95

.5750 24005750 65.95

.5755 24005755 65.95

CHUCKING REAMERS



MADE IN USA


TOOLDIAM.

EDP NO.

PRICE

.6060 24006060 $65.95

.6065 24006065 65.95

.6070 24006070 65.95

.6075 24006075 65.95

.6080 24006080 65.95

.6085 24006085 65.95

.6090 24006090 65.95

.6095 24006095 65.95

.6100 24006100 65.95

.6105 24006105 65.95

.6110 24006110 65.95

.6115 24006115 65.95

.6120 24006120 65.95

.6125 24006125 65.95

.6130 24006130 65.95

.6135 24006135 65.95

.6140 24006140 65.95

.6145 24006145 65.95

.6150 24006150 65.95

.6155 24006155 65.95

.6160 24006160 65.95

.6165 24006165 65.95

.6170 24006170 65.95

.6175 24006175 65.95

.6180 24006180 65.95

.6185 24006185 65.95

.6190 24006190 65.95

.6195 24006195 65.95

.6200 24006200 65.95

.6205 24006205 65.95

.6210 24006210 65.95

.6215 24006215 65.95

.6220 2400158 65.95

.6225 24006225 65.95

.6230 24006230 65.95

.6235 24006235 65.95

.6240 247862 65.95

.6245 24006245 65.95

.6250 240020 54.50

.6255 24006255 65.95

.6260 247863 65.95

.6265 24006265 65.95

.6270 24006270 65.95

.6275 24006275 65.95

.6280 24006280 65.95

.6285 24006285 66.90

.6290 24006290 66.90

.6295 24006295 66.90

.6300 24006300 66.90

.6305 24006305 66.90

.6310 24006310 66.90

.6315 24006315 66.90

.6320 24006320 66.90

.6325 24006325 66.90

.6330 24006330 66.90

.6335 24006335 66.90

.6340 24006340 66.90

.6345 24006345 66.90

.6350 24006350 66.90

.6355 24006355 66.90

TOOLDIAM.

EDP NO.

PRICE

.7260 24007260 $69.50

.7265 24007265 69.50

.7270 24007270 69.50

.7275 24007275 69.50

.7280 24007280 69.50

.7285 24007285 69.50

.7290 24007290 69.50

.7295 24007295 69.50

.7300 24007300 69.50

.7305 24007305 69.50

.7310 24007310 69.50

.7315 24007315 69.50

.7320 24007320 69.50

.7325 24007325 69.50

.7330 24007330 69.50

.7335 24007335 69.50

.7340 24007340 69.50

.7345 24007345 69.50

.7350 24007350 69.50

.7355 24007355 69.50

.7360 24007360 69.50

.7365 24007365 69.50

.7370 24007370 69.50

.7375 24007375 69.50

.7380 24007380 69.50

.7385 24007385 69.50

.7390 24007390 69.50

.7395 24007395 69.50

.7400 24007400 69.50

.7405 24007405 69.50

.7410 24007410 69.50

.7415 24007415 69.50

.7420 24007420 69.50

.7425 24007425 69.50

.7430 24007430 69.50

.7435 24007435 69.50

.7440 24007440 69.50

.7445 24007445 69.50

.7450 24007450 69.50

.7455 24007455 69.50

.7460 24007460 69.50

.7465 24007465 69.50

.7470 24007470 69.50

.7475 24007475 69.50

.7480 2400190 69.50

.7485 24007485 69.50

.7490 247874 69.50

.7495 24007495 69.50

.7500 240024 58.05

.7505 24007505 69.50

.7510 247875 69.50

.7515 24007515 69.50

.7520 2400191 69.50

.7525 24007525 69.50

.7530 24007530 69.50

.7535 24007535 71.45

.7540 24007540 71.45

.7545 24007545 71.45

.7550 24007550 71.45

.7555 24007555 71.45

TOOLDIAM.

EDP NO.

PRICE

.6360 24006360 $66.90

.6365 24006365 66.90

.6370 24006370 66.90

.6375 24006375 66.90

.6380 24006380 66.90

.6385 24006385 66.90

.6390 24006390 66.90

.6395 24006395 66.90

.6400 24006400 66.90

.6405 24006405 66.90

.6410 24006410 66.90

.6415 24006415 66.90

.6420 24006420 66.90

.6425 24006425 66.90

.6430 24006430 66.90

.6435 24006435 66.90

.6440 24006440 66.90

.6445 24006445 66.90

.6450 24006450 66.90

.6455 24006455 66.90

.6460 24006460 66.90

.6465 24006465 66.90

.6470 24006470 66.90

.6475 24006475 66.90

.6480 24006480 66.90

.6485 24006485 66.90

.6490 24006490 66.90

.6495 24006495 66.90

.6500 24006500 66.90

.6505 24006505 66.90

.6510 24006510 66.90

.6515 24006515 66.90

.6520 24006520 66.90

.6525 24006525 66.90

.6530 24006530 66.90

.6535 2400166 66.90

.6540 24006540 66.90

.6545 24006545 66.90

.6550 24006550 66.90

.6555 24006555 66.90

.6560 24006560 66.90

.6565 24006565 66.90

.6570 24006570 66.90

.6575 2400167 66.90

.6580 24006580 66.90

.6585 24006585 66.90

.6590 24006590 66.90

.6595 24006595 66.90

.6600 24006600 66.90

.6605 24006605 66.90

.6610 24006610 66.90

.6615 24006615 66.90

.6620 24006620 66.90

.6625 24006625 66.90

.6630 24006630 66.90

.6635 24006635 66.90

.6640 24006640 66.90

.6645 24006645 66.90

.6650 24006650 66.90

.6655 24006655 66.90

TOOLDIAM.

EDP NO.

PRICE

.6660 24006660 $66.90

.6665 24006665 66.90

.6670 24006670 66.90

.6675 24006675 66.90

.6680 24006680 66.90

.6685 24006685 66.90

.6690 24006690 66.90

.6695 24006695 66.90

.6700 24006700 66.90

.6705 24006705 66.90

.6710 24006710 66.90

.6715 24006715 66.90

.6720 24006720 66.90

.6725 24006725 66.90

.6730 24006730 66.90

.6735 24006735 66.90

.6740 24006740 66.90

.6745 24006745 66.90

.6750 24006750 66.90

.6755 24006755 66.90

.6760 24006760 66.90

.6765 24006765 66.90

.6770 24006770 66.90

.6775 24006775 66.90

.6780 24006780 66.90

.6785 24006785 66.90

.6790 24006790 66.90

.6795 24006795 66.90

.6800 24006800 66.90

.6805 24006805 66.90

.6810 24006810 66.90

.6815 24006815 66.90

.6820 24006820 66.90

.6825 24006825 66.90

.6830 24006830 66.90

.6835 24006835 66.90

.6840 24006840 66.90

.6845 24006845 66.90

.6850 2400174 66.90

.6855 24006855 66.90

.6860 24006860 66.90

.6865 24006865 66.90

.6870 24006870 66.90

.6875 240022 55.45

.6880 24006880 66.90

.6885 24006885 66.90

.6890 2400175 66.90

.6895 24006895 66.90

.6900 24006900 66.90

.6905 24006905 66.90

.6910 24006910 66.90

.6915 24006915 69.50

.6920 24006920 69.50

.6925 24006925 69.50

.6930 24006930 69.50

.6935 24006935 69.50

.6940 24006940 69.50

.6945 24006945 69.50

.6950 24006950 69.50

.6955 24006955 69.50

TOOLDIAM.

EDP NO.

PRICE

.6960 24006960 $69.50

.6965 24006965 69.50

.6970 24006970 69.50

.6975 24006975 69.50

.6980 24006980 69.50

.6985 24006985 69.50

.6990 24006990 69.50

.6995 24006995 69.50

.7000 24007000 69.50

.7005 24007005 69.50

.7010 24007010 69.50

.7015 24007015 69.50

.7020 24007020 69.50

.7025 24007025 69.50

.7030 24007030 69.50

.7035 24007035 69.50

.7040 24007040 69.50

.7045 24007045 69.50

.7050 24007050 69.50

.7055 24007055 69.50

.7060 24007060 69.50

.7065 24007065 69.50

.7070 24007070 69.50

.7075 24007075 69.50

.7080 24007080 69.50

.7085 24007085 69.50

.7090 24007090 69.50

.7095 24007095 69.50

.7100 24007100 69.50

.7105 24007105 69.50

.7110 24007110 69.50

.7115 24007115 69.50

.7120 24007120 69.50

.7125 24007125 69.50

.7130 24007130 69.50

.7135 24007135 69.50

.7140 24007140 69.50

.7145 24007145 69.50

.7150 24007150 69.50

.7155 24007155 69.50

.7160 24007160 69.50

.7165 2400182 69.50

.7170 24007170 69.50

.7175 24007175 69.50

.7180 24007180 69.50

.7185 24007185 69.50

.7190 24007190 69.50

.7195 24007195 69.50

.7200 24007200 69.50

.7205 2400183 69.50

.7210 24007210 69.50

.7215 24007215 69.50

.7220 24007220 69.50

.7225 24007225 69.50

.7230 24007230 69.50

.7235 24007235 69.50

.7240 24007240 69.50

.7245 24007245 69.50

.7250 24007250 69.50

.7255 24007255 69.50


CHUCKING REAMERS


MADE IN USA


CHUCKING REAMERS

CARBIDE TIPPED - STRAIGHT POLISHED FLUTES - TAPER SHANK

TOOLDIAMETER MORSE

TAPER

NUMBEROF

FLUTES

LENGTHTYPE 2402

EDP NO.PRICE

SPECIALDECIMAL

SIZE RANGE


FRAC. DEC. FLUTE OVERALL 1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14*

¼ .2500 1 4 1 ½ 6 240208 $38.80 0.2381 - 0.2530 $70.20 $54.50 $49.25 $46.75 $44.10 $42.009⁄32 .2812 1 4 1 ½ 6 240209 39.55 0.2531 - 0.2840 70.95 55.25 50.00 47.45 44.80 42.605⁄16 .3125 1 4 1 ½ 6 240210 39.55 0.2841 - 0.3150 70.95 55.25 50.00 47.45 44.80 42.6011⁄32 .3438 1 4 1 ½ 6 240211 41.00 0.3151 - 0.3470 72.45 56.70 51.40 48.90 46.25 44.15

3⁄8 .3750 1 4 1 ¾ 7 240212 37.65 0.3471 - 0.3780 66.50 52.05 47.15 44.90 42.40 40.4513⁄32 .4062 1 4 1 ¾ 7 240213 43.05 0.3781 - 0.4090 74.45 58.70 53.40 50.95 48.25 46.107⁄16 .4375 1 4 1 ¾ 7 240214 45.80 0.4091 - 0.4410 77.20 61.50 56.20 53.70 51.00 48.8515⁄32 .4688 1 4 1 ¾ 7 240215 47.00 0.4411 - 0.4720 78.45 62.70 57.40 54.90 52.20 50.10

½ .5000 1 6 2 8 240216 55.35 0.4721 - 0.5030 89.95 72.60 66.85 64.10 61.10 58.8017⁄32 .5312 1 6 2 8 240217 59.80 0.5031 - 0.5340 94.40 77.00 71.20 68.50 65.50 63.109⁄16 .5625 1 6 2 8 240218 59.80 0.5341 - 0.5660 94.40 77.00 71.20 68.50 65.50 63.1019⁄32 .5938 1 6 2 8 240219 62.65 0.5661 - 0.5970 97.25 79.90 74.10 71.40 68.35 66.05

5⁄8 .6250 2 6 2 ¼ 9 240220 62.65 0.5971 - 0.6280 97.25 79.90 74.10 71.40 68.35 66.0521⁄32 .6562 2 6 2 ¼ 9 240221 63.75 0.6281 - 0.6590 98.35 81.05 75.30 72.50 69.50 67.1511⁄16 .6875 2 6 2 ¼ 9 240222 63.75 0.6591 - 0.6910 98.35 81.05 75.30 72.50 69.50 67.1523⁄32 .7188 2 6 2 ¼ 9 240223 66.65 0.6911 - 0.7220 101.30 83.90 78.10 75.40 72.45 70.05

¾ .7500 2 6 2 ½ 9 ½ 240224 66.65 0.7221 - 0.7530 101.30 83.90 78.10 75.40 72.45 70.0525⁄32 .7812 2 6 2 ½ 9 ½ 240225 68.75 0.7531 - 0.7840 103.35 85.95 80.25 77.50 74.45 72.1513⁄16 .8125 2 6 2 ½ 9 ½ 240226 68.75 0.7841 - 0.8160 103.35 85.95 80.25 77.50 74.45 72.1527⁄32 .8438 2 6 2 ½ 9 ½ 240227 71.70 0.8161 - 0.8470 106.30 88.95 83.20 80.40 77.50 75.05

7⁄8 .8750 2 6 2 5⁄8 10 240228 74.45 0.8471 - 0.8780 110.30 92.35 86.35 83.40 80.35 77.9029⁄32 .9062 2 6 2 5⁄8 10 240229 87.30 0.8781 - 0.9090 123.15 105.15 99.15 96.25 93.25 90.8015⁄16 .9375 3 8 2 5⁄8 10 240230 87.30 0.9091 - 0.9410 123.15 105.15 99.15 96.25 93.25 90.8031⁄32 .9688 3 8 2 5⁄8 10 240231 91.00 0.9411 - 0.9720 126.85 108.85 102.80 99.95 96.90 94.45

1 1.0000 3 8 2 ¾ 10 ½ 240232 91.00 0.9721 - 1.0030 126.85 108.85 102.80 99.95 96.90 94.451 1⁄16 1.0625 3 8 2 ¾ 10 ½ 240234 124.90 1.0031 - 1.0660 159.35 142.15 136.40 133.60 130.60 128.301 1⁄8 1.1250 3 8 2 7⁄8 11 240236 133.10 1.0661 - 1.1280 167.50 150.20 144.50 141.65 138.80 136.501 3⁄16 1.1875 3 8 2 7⁄8 11 240238 140.95 1.1281 - 1.1905 175.45 158.10 152.40 149.55 146.60 144.35

1 ¼ 1.2500 4 8 3 11 ½ 240240 156.65 1.1906 - 1.2530 191.05 173.80 168.05 165.25 162.35 160.001 5⁄16 1.3125 4 8 3 11 ½ 240242 168.90 1.2531 - 1.3155 203.30 186.05 180.30 177.55 174.60 172.251 3⁄8 1.3750 4 8 3 ¼ 12 240244 175.70 1.3156 - 1.3780 210.15 192.85 187.15 184.40 181.40 179.151 7⁄16 1.4375 4 8 3 ¼ 12 240246 179.35 1.3781 - 1.4405 213.80 196.60 190.75 188.05 185.00 182.75

1 ½ 1.5000 4 8 3 ½ 12 ½ 240248 188.30 1.4406 - 1.5030 222.75 205.55 199.70 197.00 194.00 191.651 9⁄16 1.5625 4 8 3 ½ 12 ½ 240250 203.25 1.5031 - 1.5660 237.65 220.45 214.65 211.90 208.95 206.601 5⁄8 1.6250 4 8 3 ¾ 13 240252 210.25 1.5661 - 1.6280 244.70 227.50 221.65 218.95 216.00 213.651 11⁄16 1.6875 4 8 3 ¾ 13 240254 236.45 1.6281 - 1.6910 270.90 253.60 247.90 245.05 242.20 239.90

1 ¾ 1.7500 4 10 4 13 ½ 240256 236.45 1.6911 - 1.7530 270.90 253.60 247.90 245.05 242.20 239.901 13⁄16 1.8125 4 10 4 13 ½ 240258 236.45 1.7531 - 1.8160 270.90 253.60 247.90 245.05 242.20 239.901 7⁄8 1.8750 4 10 4 ¼ 14 240260 247.80 1.8161 - 1.8780 282.15 264.90 259.10 256.35 253.45 251.101 15⁄16 1.9375 4 10 4 ¼ 14 240262 247.80 1.8781 - 1.9410 282.15 264.90 259.10 256.35 253.45 251.10

2 2.0000 4 12 4 ¼ 14 240264 247.80 1.9411 - 2.0030 282.15 264.90 259.10 256.35 253.45 251.10


TYPE 2402 - FINISHED FRACTIONAL SIZESTaper shank and straight polished Wutes.Carbide tips brazed to one piece hardened alloy steelbodies.Cutting diameter tolerance plus. 0003”, minus .0000”.

USE:For general reaming of steel, cast iron, non-ferrous metals,plastics and non-metals.

OPTIONS:Intermediate decimal & metric sizes (priced asindicated in extended table below).Cutting diameter reduced for small steps or pilot.Radius end or end chamfer other than 45˚.End cutting.Rose grind (twice normal back taper).Semi-Xnished type reamers in stock (see page 73).Closer tolerance.For +.0002” add $1.00 per tool.For +.0001” add $3.00 per tool.

MADE IN USA


CHUCKING REAMERS

CARBIDE TIPPED - STRAIGHT FLUTES & TAPER SHANK


TOOLDIAMETER

TYPE2402

METRICEDP NO.

METRICPRICE

DIMENSIONS

SPECIAL METRIC

SIZE RANGE


MORSETAPER

NO. OFFLUTES

LENGTH

1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14 OVER 14FLT

CAR-BIDE

OVER-ALLmm INCH

6.0 .2362 2402060 $49.25 1 4 1 ½ ½ 6 6.000 - 6.426 $72.95 $57.20 $52.00 $49.35 $46.75 $44.50 $41.506.5 .2559 2402065 50.00 1 4 1 ½ ½ 6 6.427 - 7.214 73.60 57.95 52.70 50.10 47.45 45.25 42.257.0 .2756 2402070 50.00 1 4 1 ½ ½ 6 - - - - - - - -7.5 .2953 2402075 50.00 1 4 1 ½ ½ 6 7.215 - 8.001 73.60 57.95 52.70 50.10 47.45 45.25 42.25

8.0 .3150 2402080 50.00 1 4 1 ½ ½ 6 - - - - - - - -8.5 .3346 2402085 51.40 1 4 1 ½ 5⁄8 6 8.002 - 8.814 75.05 59.35 54.15 51.50 48.90 46.75 43.659.0 .3543 2402090 47.15 1 4 1 ¾ 5⁄8 7 8.815 - 9.601 68.90 54.50 49.70 47.30 44.90 42.95 40.109.5 .3740 2402095 47.15 1 4 1 ¾ 5⁄8 7 - - - - - - - -

10.0 .3937 2402100 53.40 1 4 1 ¾ 5⁄8 7 9.602 - 10.389 77.05 61.35 56.15 53.55 50.95 48.75 45.7510.5 .4134 2402105 56.20 1 4 1 ¾ 5⁄8 7 10.390 - 11.201 79.85 64.20 58.90 56.35 53.70 51.45 48.5011.0 .4331 2402110 56.20 1 4 1 ¾ 5⁄8 7 - - - - - - - -11.5 .4528 2402115 57.40 1 4 1 ¾ 5⁄8 7 11.202 - 11.989 81.05 65.45 60.10 57.60 54.90 52.75 49.75

12.0 .4724 2402120 66.85 1 6 2 5⁄8 8 11.990 - 12.776 92.80 75.65 69.80 66.95 64.10 61.65 58.3012.5 .4921 2402125 66.85 1 6 2 5⁄8 8 - - - - - - - -13.0 .5118 2402130 71.20 1 6 2 5⁄8 8 12.777 - 13.564 97.25 80.00 74.20 71.40 68.50 66.05 62.7013.5 .5315 2402135 71.20 1 6 2 5⁄8 8 - - - - - - - -

14.0 .5512 2402140 71.20 1 6 2 5⁄8 8 13.565 - 14.376 97.25 80.00 74.20 71.40 68.50 66.05 62.7014.5 .5709 2402145 74.10 1 6 2 5⁄8 8 14.377 - 15.164 100.15 82.85 77.05 74.30 71.40 68.95 65.6015.0 .5906 2402150 74.10 1 6 2 5⁄8 8 - - - - - - - -15.5 .6102 2402155 74.10 2 6 2 ¼ 5⁄8 9 15.165 - 15.951 100.15 82.85 77.05 74.30 71.40 68.95 65.60

16.0 .6299 2402160 75.30 2 6 2 ¼ 5⁄8 9 15.952 - 16.739 101.30 83.95 78.25 75.40 72.50 70.05 66.8016.5 .6496 2402165 75.30 2 6 2 ¼ 5⁄8 9 - - - - - - - -17.0 .6693 2402170 75.30 2 6 2 ¼ 5⁄8 9 16.740 - 17.551 101.30 83.95 78.25 75.40 72.50 70.05 66.8017.5 .6890 2402175 75.30 2 6 2 ¼ 5⁄8 9 - - - - - - - -

18.0 .7087 2402180 78.10 2 6 2 ¼ 5⁄8 9 17.552 - 18.339 104.20 86.90 81.15 78.30 75.40 73.00 69.7018.5 .7283 2402185 78.10 2 6 2 ½ ¾ 9 ½ 18.340 - 19.126 104.20 86.90 81.15 78.30 75.40 73.00 69.7019.0 .7480 2402190 78.10 2 6 2 ½ ¾ 9 ½ - - - - - - - -19.5 .7677 2402195 80.25 2 6 2 ½ ¾ 9 ½ 19.127 - 19.914 106.20 88.95 83.20 80.35 77.50 75.00 71.70

20.0 .7874 2402200 80.25 2 6 2 ½ ¾ 9 ½ 19.915 - 20.726 106.20 88.95 83.20 80.35 77.50 75.00 71.7020.5 .8071 2402205 80.25 2 6 2 ½ ¾ 9 ½ - - - - - - - -21.0 .8268 2402210 83.20 2 6 2 ½ ¾ 9 ½ 20.727 - 21.514 109.25 92.00 86.10 83.30 80.40 77.95 74.7021.5 .8465 2402215 83.20 2 6 2 ½ ¾ 9 ½ - - - - - - - -

22.0 .8661 2402220 83.20 2 6 2 5⁄8 ¾ 10 21.515 - 22.301 109.25 92.00 86.10 83.30 80.40 77.95 74.7022.5 .8858 2402225 99.15 2 6 2 5⁄8 ¾ 10 22.302 - 23.089 126.20 108.30 102.25 99.25 96.25 93.75 90.3523.0 .9055 2402230 99.15 2 6 2 5⁄8 ¾ 10 - - - - - - - -23.5 .9252 2402235 99.15 3 8 2 5⁄8 ¾ 10 23.090 - 23.901 126.20 108.30 102.25 99.25 96.25 93.75 90.35

24.0 .9449 2402240 102.80 3 8 2 5⁄8 ¾ 10 23.902 - 24.689 129.90 112.00 105.90 102.95 99.95 97.45 94.0024.5 .9646 2402245 102.80 3 8 2 5⁄8 ¾ 10 - - - - - - - -25.0 .9843 2402250 102.80 3 8 2 ¾ ¾ 10 ½ 24.690 - 25.476 129.90 112.00 105.90 102.95 99.95 97.45 94.0025.5 1.0039 2402255 136.40 3 8 2 ¾ ¾ 10 ½ 25.477 - 27.076 162.30 145.05 139.35 136.55 133.60 131.25 127.95

26.0 1.0236 2402260 136.40 3 8 2 ¾ ¾ 10 ½ - - - - - - - -27.0 1.0630 2402270 136.40 3 8 2 ¾ ¾ 10 ½ - - - - - - - -28.0 1.1024 2402280 144.50 3 8 2 7⁄8 7⁄8 11 27.077 - 28.651 170.35 153.15 147.40 144.60 141.65 139.35 136.0029.0 1.1417 2402290 152.40 3 8 2 7⁄8 7⁄8 11 28.652 - 30.239 178.25 161.05 155.35 152.50 149.55 147.25 143.90

30.0 1.1811 2402300 152.40 3 8 2 7⁄8 7⁄8 11 - - - - - - - -31.0 1.2205 2402310 168.05 4 8 3 7⁄8 11 ½ 30.240 - 31.826 193.95 176.80 171.00 168.15 165.25 162.85 159.6032.0 1.2598 2402320 180.30 4 8 3 7⁄8 11 ½ 31.827 - 33.414 206.15 189.05 183.20 180.40 177.55 175.10 171.8533.0 1.2992 2402330 180.30 4 8 3 7⁄8 11 ½ - - - - - - - -

34.0 1.3386 2402340 187.15 4 8 3 ¼ 7⁄8 12 33.415 - 35.001 213.00 195.85 190.10 187.25 184.40 182.00 178.7035.0 1.3780 2402350 187.15 4 8 3 ¼ 7⁄8 12 - - - - - - - -36.0 1.4173 2402360 190.75 4 8 3 ¼ 7⁄8 12 35.002 - 36.589 216.70 199.50 193.75 190.95 188.05 185.65 182.3037.0 1.4567 2402370 199.70 4 8 3 ½ 7⁄8 12 ½ 36.590 - 38.176 225.65 208.45 202.65 199.90 197.00 194.60 191.35

38.0 1.4961 2402380 199.70 4 8 3 ½ 7⁄8 12 ½ - - - - - - - -39.0 1.5354 2402390 214.65 4 8 3 ½ 7⁄8 12 ½ 38.177 - 39.776 240.55 223.40 217.60 214.80 211.90 209.45 206.1540.0 1.5748 2402400 221.65 4 8 3 ¾ 7⁄8 13 39.777 - 41.351 247.60 230.40 224.65 221.80 218.95 216.55 213.2041.0 1.6142 2402410 221.65 4 8 3 ¾ 7⁄8 13 - - - - - - - -


TYPE 2402 - METRIC

MADE IN USA


TOOLDIAMETER SHANK

DIAM.

N0.OF

FLUTES

LENGTHTYPE 2450

EDP NO.PRICE

SPECIALDECIMAL

SIZE RANGE



3⁄16 .1875 11⁄64 4 1 ½ 6 245006 $40.30 0.1770 - 0.2040 $72.60 $56.40 $51.10 $48.45 $45.65 $43.457⁄32 .2188 13⁄64 4 1 ½ 6 245007 40.30 0.2041 - 0.2210 72.60 56.40 51.10 48.45 45.65 43.4515⁄64 .2344 7⁄32 4 1 ½ 6 24502344 40.30 0.2211 - 0.2380 72.60 56.40 51.10 48.45 45.65 43.45¼ .2500 15⁄64 4 1 ½ 6 245008 40.30 0.2381 - 0.2530 72.60 56.40 51.10 48.45 45.65 43.45

9⁄32 .2812 15⁄64 4 1 ½ 6 245009 41.20 0.2531 - 0.2840 73.45 57.25 51.90 49.30 46.50 44.355⁄16 .3125 9⁄32 4 1 ½ 6 245010 41.20 0.2841 - 0.3150 73.45 57.25 51.90 49.30 46.50 44.3511⁄32 .3438 9⁄32 4 1 ½ 6 245011 42.65 0.3151 - 0.3470 74.95 58.85 53.35 50.85 48.00 45.853⁄8 .3750 5⁄16 4 1 ¾ 7 245012 42.65 0.3471 - 0.3780 74.95 58.85 53.35 50.85 48.00 45.85

13⁄32 .4062 5⁄16 4 1 ¾ 7 245013 44.80 0.3781 - 0.4090 77.05 60.95 55.50 52.95 50.15 47.957⁄16 .4375 3⁄8 4 1 ¾ 7 245014 48.45 0.4091 - 0.4410 80.75 64.55 59.10 56.60 53.80 51.6015⁄32 .4688 3⁄8 4 1 ¾ 7 245015 52.30 0.4411 - 0.4720 84.65 68.50 63.00 60.40 57.70 55.50½ .5000 7⁄16 6 2 8 245016 56.00 0.4721 - 0.5030 90.65 73.35 67.60 64.75 61.85 59.40

17⁄32 .5312 7⁄16 6 2 8 245017 57.65 0.5031 - 0.5340 92.25 74.90 69.10 66.30 63.35 61.009⁄16 .5625 7⁄16 6 2 8 245018 57.65 0.5341 - 0.5660 92.25 74.90 69.10 66.30 63.35 61.0019⁄32 .5938 7⁄16 6 2 8 245019 59.90 0.5661 - 0.5970 94.50 77.10 71.40 68.65 65.60 63.305⁄8 .6250 9⁄16 6 2 9 245020 59.90 0.5971 - 0.6280 94.50 77.10 71.40 68.65 65.60 63.30

21⁄32 .6562 9⁄16 6 2 9 245021 60.95 0.6281 - 0.6590 95.55 78.25 72.45 69.70 66.65 64.3511⁄16 .6875 9⁄16 6 2 9 245022 60.95 0.6591 - 0.6910 95.55 78.25 72.45 69.70 66.65 64.3523⁄32 .7188 9⁄16 6 2 9 245023 63.75 0.6911 - 0.7220 98.35 81.05 75.30 72.50 69.50 67.15¾ .7500 5⁄8 6 2 9 ½ 245024 63.75 0.7221 - 0.7530 98.35 81.05 75.30 72.50 69.50 67.15

25⁄32 .7812 5⁄8 6 2 9 ½ 245025 65.95 0.7531 - 0.7840 100.55 83.25 77.50 74.70 71.70 69.4013⁄16 .8125 5⁄8 6 2 9 ½ 245026 65.95 0.7841 - 0.8160 100.55 83.25 77.50 74.70 71.70 69.4027⁄32 .8438 5⁄8 6 2 9 ½ 245027 68.65 0.8161 - 0.8470 103.25 85.85 80.05 77.25 74.35 71.957⁄8 .8750 ¾ 6 2 ¼ 10 245028 71.20 0.8471 - 0.8780 107.10 89.15 83.10 80.20 77.10 74.70

29⁄32 .9062 ¾ 6 2 ¼ 10 245029 82.85 0.8781 - 0.9090 118.75 100.80 94.75 91.90 88.85 86.4015⁄16 .9375 ¾ 8 2 ¼ 10 245030 82.85 0.9091 - 0.9410 118.75 100.80 94.75 91.90 88.85 86.4031⁄32 .9688 ¾ 8 2 ¼ 10 245031 86.80 0.9411 - 0.9720 122.75 104.75 98.75 95.90 92.80 90.35

1 1.0000 7⁄8 8 2 ¼ 10 ½ 245032 86.80 0.9721 - 1.0030 122.75 104.75 98.75 95.90 92.80 90.35

1 1⁄16 1.0625 7⁄8 8 2 ¼ 10 ½ 245034 89.85 1.0031 - 1.0660 124.30 107.00 101.25 98.45 95.55 93.251 1⁄8 1.1250 7⁄8 8 2 ¼ 11 245036 97.20 1.0661 - 1.1280 131.60 114.45 108.60 105.90 102.85 100.551 3⁄16 1.1875 1 8 2 ¼ 11 245038 101.70 1.1281 - 1.1905 136.10 118.90 113.15 110.35 107.40 105.101 ¼ 1.2500 1 8 2 ½ 11 ½ 245040 118.75 1.1906 - 1.2530 153.15 135.95 130.15 127.40 124.45 122.10

1 5⁄16 1.3125 1 8 2 ½ 11 ½ 245042 118.75 1.2531 - 1.3155 153.15 135.95 130.15 127.40 124.45 122.101 3⁄8 1.3750 1 8 2 ½ 12 245044 120.50 1.3156 - 1.3780 154.90 137.70 131.85 129.15 126.20 123.851 7⁄16 1.4375 1 ¼ 8 2 ½ 12 245046 133.15 1.3781 - 1.4405 167.60 150.25 144.55 141.80 138.85 136.551 ½ 1.5000 1 ¼ 8 2 ½ 12 ½ 245048 159.80 1.4406 - 1.5030 194.20 176.95 171.25 168.45 165.50 163.25

1 9⁄16 1.5625 1 ¼ 8 2 ½ 12 ½ 245050 210.95 1.5031 - 1.5660 245.35 228.10 222.35 219.60 216.65 214.351 5⁄8 1.6250 1 ¼ 8 2 ¾ 13 245052 218.15 1.5661 - 1.6280 252.60 235.25 229.55 226.85 223.85 221.551 11⁄16 1.6875 1 ¼ 8 2 ¾ 13 245054 239.50 1.6281 - 1.6910 274.00 256.75 251.00 248.20 245.30 242.951 ¾ 1.7500 1 ¼ 10 3 13 ½ 245056 239.50 1.6911 - 1.7530 274.00 256.75 251.00 248.20 245.30 242.95

1 13⁄16 1.8125 1 ½ 10 3 13 ½ 245058 245.05 1.7531 - 1.8160 279.60 262.35 256.50 253.80 250.80 248.501 7⁄8 1.8750 1 ½ 10 3 ¼ 14 245060 257.05 1.8161 - 1.8780 291.45 274.15 268.45 265.70 262.70 260.401 15⁄16 1.9375 1 ½ 10 3 ¼ 14 245062 272.55 1.8781 - 1.9410 306.90 289.65 283.90 281.15 278.25 275.902 2.0000 1 ½ 12 3 ¼ 14 245064 272.55 1.9411 - 2.0030 306.90 289.65 283.90 281.15 278.25 275.90

CHUCKING REAMERS

CARBIDE TIPPED - STRAIGHT FLUTE LONG CARBIDE - STRAIGHT SHANK

TYPE 2450 - FINISHED FRACTIONAL SIZESStraight shank and straight polished Wutes.Flute long carbide brazed to one piece hardened alloysteel bodies.Cutting diameter tolerance plus .0003” minus .0000”.

USE:For all general reaming - especially designed with Wutelong carbide for deep hole reaming to precision tolerances and for long production runs.

OPTIONS:Intermediate decimal sizes (priced as indicated in extended table below).Cutting diameter reduced for small steps or pilot.Radius end or end chamfer other than 45˚.End cutting.Rose grind (twice normal back taper).Short shank or undersized shank diameter.Flat on shank or tanged shank.Semi-Xnished type reamers in stock (see page 73).Closer tolerance.For +.0002” add $1.00 per tool.For +.0001” add $3.00 per tool.


MADE IN USA


TOOLDIAMETER

TYPE2450

METRICEDP NO.

METRICPRICE


SIZE RANGE


SHANKDIAM.

NO. OFFLUTES

LENGTH

1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14 OVER 14mm INCH

FLUTE &CARBIDE

OVER-ALL

4.5 .1772 2450045 $51.10 11⁄64 4 1 ½ 6 4.494-5.182 $75.35 $59.20 53.80 $51.15 $48.45 $46.20 $43.105.0 .1969 2450050 51.10 11⁄64 4 1 ½ 6 - - - - - - - -5.5 .2165 2450055 51.10 13⁄64 4 1 ½ 6 5.183-5.613 75.35 59.20 53.80 51.15 48.45 46.20 43.106.0 .2362 2450060 51.10 7⁄32 4 1 ½ 6 5.614-6.045 75.35 59.20 53.80 51.15 48.45 46.20 43.10

6.3 .2480 2450063 51.10 15⁄64 4 1 ½ 6 6.046-6.426 75.35 59.20 53.80 51.15 48.45 46.20 43.106.5 .2559 2450065 51.90 15⁄64 4 1 ½ 6 6.427-7.214 76.10 60.05 54.65 52.00 49.30 47.00 44.007.0 .2756 2450070 51.90 15⁄64 4 1 ½ 6 - - - - - - - -7.5 .2953 2450075 51.90 9⁄32 4 1 ½ 6 7.215-8.001 76.10 60.05 54.65 52.00 49.30 47.00 44.00

8.0 .3150 2450080 51.90 9⁄32 4 1 ½ 6 - - - - - - - -8.5 .3346 2450085 53.35 9⁄32 4 1 ½ 6 8.002-8.814 77.70 61.60 56.15 53.50 50.85 48.55 45.459.0 .3543 2450090 53.35 5⁄16 4 1 ¾ 7 8.815-9.601 77.70 61.60 56.15 53.50 50.85 48.55 45.459.5 .3740 2450095 53.35 5⁄16 4 1 ¾ 7 - - - - - - - -

10.0 .3937 2450100 55.50 5⁄16 4 1 ¾ 7 9.602-10.389 79.80 63.70 58.25 55.65 52.95 50.70 47.5510.5 .4134 2450105 59.10 3⁄8 4 1 ¾ 7 10.390-11.201 83.50 67.25 61.90 59.25 56.60 54.30 51.2011.0 .4331 2450110 59.10 3⁄8 4 1 ¾ 7 - - - - - - - -11.5 .4528 2450115 63.00 3⁄8 4 1 ¾ 7 11.202-11.989 87.35 71.20 65.85 63.20 60.40 58.20 55.10

12.0 .4724 2450120 67.60 7⁄16 6 2 8 11.990-12.776 93.55 76.35 70.50 67.70 64.75 62.35 59.0512.5 .4921 2450125 67.60 7⁄16 6 2 8 - - - - - - - -13.0 .5118 2450130 69.10 7⁄16 6 2 8 12.777-13.564 95.20 77.85 72.10 69.20 66.30 63.90 60.6013.5 .5315 2450135 69.10 7⁄16 6 2 8 - - - - - - - -

14.0 .5512 2450140 69.10 7⁄16 6 2 8 13.565-14.376 95.20 77.85 72.10 69.20 66.30 63.90 60.6014.5 .5709 2450145 71.40 7⁄16 6 2 8 14.377-15.164 97.40 80.10 74.35 71.50 68.65 66.15 62.8515.0 .5906 2450150 71.40 7⁄16 6 2 8 - - - - - - - -15.5 .6102 2450155 71.40 9⁄16 6 2 9 15.165-15.951 97.40 80.10 74.35 71.50 68.65 66.15 62.85

16.0 .6299 2450160 72.45 9⁄16 6 2 9 15.952-16.739 98.40 81.20 75.40 72.55 69.70 67.20 63.9016.5 .6496 2450165 72.45 9⁄16 6 2 9 - - - - - - - -17.0 .6693 2450170 72.45 9⁄16 6 2 9 16.740-17.551 98.40 81.20 75.40 72.55 69.70 67.20 63.9017.5 .6890 2450175 72.45 9⁄16 6 2 9 - - - - - - - -

18.0 .7087 2450180 75.30 9⁄16 6 2 9 17.552-18.339 101.30 83.95 78.25 75.40 72.50 70.05 66.8018.5 .7283 2450185 75.30 5⁄8 6 2 9 ½ 18.340-19.126 101.30 83.95 78.25 75.40 72.50 70.05 66.8019.0 .7480 2450190 75.30 5⁄8 6 2 9 ½ - - - - - - - -19.5 .7677 2450195 77.50 5⁄8 6 2 9 ½ 19.127-19.914 103.45 86.30 80.40 77.60 74.70 72.25 68.95

20.0 .7874 2450200 77.50 5⁄8 6 2 9 ½ 19.915-20.726 103.45 86.30 80.40 77.60 74.70 72.25 68.9520.5 .8071 2450205 77.50 5⁄8 6 2 9 ½ - - - - - - - -21.0 .8268 2450210 80.05 5⁄8 6 2 9 ½ 20.727-21.514 106.10 88.85 83.05 80.25 77.25 74.90 71.5521.5 .8465 2450215 80.05 5⁄8 6 2 9 ½ - - - - - - - -

22.0 .8661 2450220 80.05 ¾ 6 2 ¼ 10 21.515-22.301 106.10 88.85 83.05 80.25 77.25 74.90 71.5522.5 .8858 2450225 94.75 ¾ 6 2 ¼ 10 22.302-23.089 121.80 103.90 97.85 94.85 91.90 89.35 85.9023.0 .9055 2450230 94.75 ¾ 6 2 ¼ 10 - - - - - - - -23.5 .9252 2450235 94.75 ¾ 8 2 ¼ 10 23.090-23.901 121.80 103.90 97.85 94.85 91.90 89.35 85.90

24.0 .9449 2450240 98.75 ¾ 8 2 ¼ 10 23.902-24.689 125.70 107.85 101.75 98.85 95.90 93.40 89.9524.5 .9646 2450245 98.75 ¾ 8 2 ¼ 10 - - - - - - - -25.0 .9843 2450250 98.75 7⁄8 8 2 ¼ 10 ½ 24.690-25.476 125.70 107.85 101.75 98.85 95.90 93.40 89.9525.5 1.0039 2450255 101.25 7⁄8 8 2 ¼ 10 ½ 25.477-27.076 127.15 110.00 104.20 101.40 98.45 96.10 92.80

26.0 1.0236 2450260 101.25 7⁄8 8 2 ¼ 10 ½ - - - - - - - -27.0 1.0630 2450270 101.25 7⁄8 8 2 ¼ 10 ½ - - - - - - - -28.0 1.1024 2450280 108.60 7⁄8 8 2 ¼ 11 27.077-28.651 134.55 117.35 111.55 108.80 105.90 103.45 100.1529.0 1.1417 2450290 113.15 1 8 2 ¼ 11 28.652-30.239 139.00 121.90 116.05 113.25 110.35 107.95 104.70

30.0 1.1811 2450300 113.15 1 8 2 ¼ 11 - - - - - - - -31.0 1.2205 2450310 130.15 1 8 2 ½ 11 ½ 30.240-31.826 156.10 138.90 133.15 130.35 127.40 124.95 121.7032.0 1.2598 2450320 130.15 1 8 2 ½ 11 ½ 31.827-33.414 156.10 138.90 133.15 130.35 127.40 124.95 121.7033.0 1.2992 2450330 130.15 1 8 2 ½ 11 ½ - - - - - - - -

34.0 1.3386 2450340 131.85 1 8 2 ½ 12 33.415-35.001 157.85 140.65 134.85 132.10 129.15 126.80 123.5035.0 1.3780 2450350 131.85 1 8 2 ½ 12 - - - - - - - -36.0 1.4173 2450360 144.55 1 ¼ 8 2 ½ 12 35.002-36.589 170.40 153.30 147.45 144.65 141.80 139.40 136.0537.0 1.4567 2450370 171.25 1 ¼ 8 2 ½ 12 ½ 36.590-38.176 197.10 179.95 174.15 171.35 168.45 166.05 162.75

38.0 1.4961 2450380 171.25 1 ¼ 8 2 ½ 12 ½ - - - - - - - -

CHUCKING REAMERS

CARBIDE TIPPED - STRAIGHT FLUTE LONG CARBIDE & STRAIGHT SHANK



TYPE 2450 - METRIC

MADE IN USA


TOOLDIAM.

EDP NO.

PRICE

.1770 24501770 $51.10

.1775 24501775 51.10

.1780 24501780 51.10

.1785 24501785 51.10

.1790 24501790 51.10

.1795 24501795 51.10

.1800 24501800 51.10

.1805 24501805 51.10

.1810 24501810 51.10

.1815 24501815 51.10

.1820 24501820 51.10

.1825 24501825 51.10

.1830 24501830 51.10

.1835 24501835 51.10

.1840 24501840 51.10

.1845 24501845 51.10

.1850 2450047 51.10

.1855 24501855 51.10

.1860 24501860 51.10

.1865 24501865 51.10

.1870 24501870 51.10

.1875 245006 40.30

.1880 24501880 51.10

.1885 24501885 51.10

.1890 2450048 51.10

.1895 24501895 51.10

.1900 24501900 51.10

.1905 24501905 51.10

.1910 24501910 51.10

.1915 24501915 51.10

.1920 24501920 51.10

.1925 24501925 51.10

.1930 24501930 51.10

.1935 24501935 51.10

.1940 24501940 51.10

.1945 24501945 51.10

.1950 24501950 51.10

.1955 24501955 51.10

.1960 24501960 51.10

.1965 24501965 51.10

.1970 24501970 51.10

.1975 24501975 51.10

.1980 24501980 51.10

.1985 24501985 51.10

.1990 24501990 51.10

.1995 24501995 51.10

.2000 24502000 51.10

.2005 24502005 51.10

.2010 24502010 51.10

.2015 24502015 51.10

.2020 24502020 51.10

.2025 24502025 51.10

.2030 24502030 51.10

.2035 24502035 51.10

.2040 24502040 51.10

.2045 24502045 51.10

.2050 24502050 51.10

.2055 24502055 51.10

.2060 24502060 51.10

.2065 24502065 51.10

TOOLDIAM.

EDP NO.

PRICE

.2970 24502970 $51.90

.2975 24502975 51.90

.2980 24502980 51.90

.2985 24502985 51.90

.2990 24502990 51.90

.2995 24502995 51.90

.3000 24503000 51.90

.3005 24503005 51.90

.3010 24503010 51.90

.3015 24503015 51.90

.3020 24503020 51.90

.3025 24503025 51.90

.3030 24503030 51.90

.3035 24503035 51.90

.3040 24503040 51.90

.3045 24503045 51.90

.3050 24503050 51.90

.3055 24503055 51.90

.3060 24503060 51.90

.3065 24503065 51.90

.3070 24503070 51.90

.3075 24503075 51.90

.3080 24503080 51.90

.3085 24503085 51.90

.3090 24503090 51.90

.3095 24503095 51.90

.3100 24503100 51.90

.3105 24503105 51.90

.3110 2450079 51.90

.3115 24503115 51.90

.3120 24503120 51.90

.3125 245010 41.20

.3130 24503130 51.90

.3135 24503135 51.90

.3140 24503140 51.90

.3145 24503145 51.90

.3150 2450080 51.90

.3155 24503155 53.35

.3160 24503160 53.35

.3165 24503165 53.35

.3170 24503170 53.35

.3175 24503175 53.35

.3180 24503180 53.35

.3185 24503185 53.35

.3190 24503190 53.35

.3195 24503195 53.35

.3200 24503200 53.35

.3205 24503205 53.35

.3210 24503210 53.35

.3215 24503215 53.35

.3220 24503220 53.35

.3225 24503225 53.35

.3230 24503230 53.35

.3235 24503235 53.35

.3240 24503240 53.35

.3245 24503245 53.35

.3250 24503250 53.35

.3255 24503255 53.35

.3260 24503260 53.35

.3265 24503265 53.35

TOOLDIAM.

EDP NO.

PRICE

.2070 24502070 $51.10

.2075 24502075 51.10

.2080 24502080 51.10

.2085 24502085 51.10

.2090 24502090 51.10

.2095 24502095 51.10

.2100 24502100 51.10

.2105 24502105 51.10

.2110 24502110 51.10

.2115 24502115 51.10

.2120 24502120 51.10

.2125 24502125 51.10

.2130 24502130 51.10

.2135 24502135 51.10

.2140 24502140 51.10

.2145 24502145 51.10

.2150 24502150 51.10

.2155 24502155 51.10

.2160 24502160 51.10

.2165 2450055 51.10

.2170 24502170 51.10

.2175 24502175 51.10

.2180 24502180 51.10

.2185 24502185 51.10

.2190 24502190 51.10

.2195 24502195 51.10

.2200 24502200 51.10

.2205 2450056 51.10

.2210 24502210 51.10

.2215 24502215 51.10

.2220 24502220 51.10

.2225 24502225 51.10

.2230 24502230 51.10

.2235 24502235 51.10

.2240 24502240 51.10

.2245 24502245 51.10

.2250 24502250 51.10

.2255 24502255 51.10

.2260 24502260 51.10

.2265 24502265 51.10

.2270 24502270 51.10

.2275 24502275 51.10

.2280 24502280 51.10

.2285 24502285 51.10

.2290 24502290 51.10

.2295 24502295 51.10

.2300 24502300 51.10

.2305 24502305 51.10

.2310 24502310 51.10

.2315 24502315 51.10

.2320 24502320 51.10

.2325 24502325 51.10

.2330 24502330 51.10

.2335 24502335 51.10

.2340 24502340 51.10

.2345 24502345 51.10

.2350 24502350 51.10

.2355 24502355 51.10

.2360 24502360 51.10

.2365 24502365 51.10

TOOLDIAM.

EDP NO.

PRICE

.2370 24502370 $51.10

.2375 24502375 51.10

.2380 24502380 51.10

.2385 24502385 51.10

.2390 24502390 51.10

.2395 24502395 51.10

.2400 24502400 51.10

.2405 24502405 51.10

.2410 24502410 51.10

.2415 24502415 51.10

.2420 24502420 51.10

.2425 24502425 51.10

.2430 24502430 51.10

.2435 24502435 51.10

.2440 24502440 51.10

.2445 24502445 51.10

.2450 24502450 51.10

.2455 24502455 51.10

.2460 24502460 51.10

.2465 24502465 51.10

.2470 24502470 51.10

.2475 24502475 51.10

.2480 2450063 51.10

.2485 24502485 51.10

.2490 24502490 51.10

.2495 24502495 51.10

.2500 245008 40.30

.2505 24502505 51.10

.2510 24502510 51.10

.2515 24502515 51.10

.2520 2450064 51.10

.2525 24502525 51.10

.2530 24502530 51.10

.2535 24502535 51.90

.2540 24502540 51.90

.2545 24502545 51.90

.2550 24502550 51.90

.2555 24502555 51.90

.2560 24502560 51.90

.2565 24502565 51.90

.2570 24502570 51.90

.2575 24502575 51.90

.2580 24502580 51.90

.2585 24502585 51.90

.2590 24502590 51.90

.2595 24502595 51.90

.2600 24502600 51.90

.2605 24502605 51.90

.2610 24502610 51.90

.2615 24502615 51.90

.2620 24502620 51.90

.2625 24502625 51.90

.2630 24502630 51.90

.2635 24502635 51.90

.2640 24502640 51.90

.2645 24502645 51.90

.2650 24502650 51.90

.2655 24502655 51.90

.2660 24502660 51.90

.2665 24502665 51.90

TOOLDIAM.

EDP NO.

PRICE

.2670 24502670 $51.90

.2675 24502675 51.90

.2680 24502680 51.90

.2685 24502685 51.90

.2690 24502690 51.90

.2695 24502695 51.90

.2700 24502700 51.90

.2705 24502705 51.90

.2710 24502710 51.90

.2715 24502715 51.90

.2720 24502720 51.90

.2725 24502725 51.90

.2730 24502730 51.90

.2735 24502735 51.90

.2740 24502740 51.90

.2745 24502745 51.90

.2750 24502750 51.90

.2755 24502755 51.90

.2760 24502760 51.90

.2765 24502765 51.90

.2770 24502770 51.90

.2775 24502775 51.90

.2780 24502780 51.90

.2785 24502785 51.90

.2790 24502790 51.90

.2795 2450071 51.90

.2800 24502800 51.90

.2805 24502805 51.90

.2810 24502810 51.90

.2815 24502815 51.90

.2820 24502820 51.90

.2825 24502825 51.90

.2830 24502830 51.90

.2835 2450072 51.90

.2840 24502840 51.90

.2845 24502845 51.90

.2850 24502850 51.90

.2855 24502855 51.90

.2860 24502860 51.90

.2865 24502865 51.90

.2870 24502870 51.90

.2875 24502875 51.90

.2880 24502880 51.90

.2885 24502885 51.90

.2890 24502890 51.90

.2895 24502895 51.90

.2900 24502900 51.90

.2905 24502905 51.90

.2910 24502910 51.90

.2915 24502915 51.90

.2920 24502920 51.90

.2925 24502925 51.90

.2930 24502930 51.90

.2935 24502935 51.90

.2940 24502940 51.90

.2945 24502945 51.90

.2950 24502950 51.90

.2955 24502955 51.90

.2960 24502960 51.90

.2965 24502965 51.90

CHUCKING REAMERS

CARBIDE TIPPED - STOCKED - FLUTE LENGTH CARBIDE - TYPE 2450


MADE IN USA


TOOLDIAM.

EDP NO.

PRICE

.3270 24503270 $53.35

.3275 24503275 53.35

.3280 24503280 53.35

.3285 24503285 53.35

.3290 24503290 53.35

.3295 24503295 53.35

.3300 24503300 53.35

.3305 24503305 53.35

.3310 24503310 53.35

.3315 24503315 53.35

.3320 24503320 53.35

.3325 24503325 53.35

.3330 24503330 53.35

.3335 24503335 53.35

.3340 24503340 53.35

.3345 24503345 53.35

.3350 24503350 53.35

.3355 24503355 53.35

.3360 24503360 53.35

.3365 24503365 53.35

.3370 24503370 53.35

.3375 24503375 53.35

.3380 24503380 53.35

.3385 24503385 53.35

.3390 24503390 53.35

.3395 24503395 53.35

.3400 24503400 53.35

.3405 24503405 53.35

.3410 24503410 53.35

.3415 24503415 53.35

.3420 24503420 53.35

.3425 2450087 53.35

.3430 24503430 53.35

.3435 24503435 53.35

.3440 24503440 53.35

.3445 24503445 53.35

.3450 24503450 53.35

.3455 24503455 53.35

.3460 24503460 53.35

.3465 2450088 53.35

.3470 24503470 53.35

.3475 24503475 53.35

.3480 24503480 53.35

.3485 24503485 53.35

.3490 24503490 53.35

.3495 24503495 53.35

.3500 24503500 53.35

.3505 24503505 53.35

.3510 24503510 53.35

.3515 24503515 53.35

.3520 24503520 53.35

.3525 24503525 53.35

.3530 24503530 53.35

.3535 24503535 53.35

.3540 24503540 53.35

.3545 24503545 53.35

.3550 24503550 53.35

.3555 24503555 53.35

.3560 24503560 53.35

.3565 24503565 53.35

TOOLDIAM.

EDP NO.

PRICE

.4470 24504470 $63.10

.4475 24504475 63.10

.4480 24504480 63.10

.4485 24504485 63.10

.4490 24504490 63.10

.4495 24504495 63.10

.4500 24504500 63.10

.4505 24504505 63.10

.4510 24504510 63.10

.4515 24504515 63.10

.4520 24504520 63.10

.4525 24504525 63.10

.4530 24504530 63.10

.4535 24504535 63.10

.4540 24504540 63.10

.4545 24504545 63.10

.4550 24504550 63.10

.4555 24504555 63.10

.4560 24504560 63.10

.4565 24504565 63.10

.4570 24504570 63.10

.4575 24504575 63.10

.4580 24504580 63.10

.4585 24504585 63.10

.4590 24504590 63.10

.4595 24504595 63.10

.4600 24504600 63.10

.4605 24504605 63.10

.4610 24504610 63.10

.4615 24504615 63.10

.4620 24504620 63.10

.4625 24504625 63.10

.4630 24504630 63.10

.4635 24504635 63.10

.4640 24504640 63.10

.4645 24504645 63.10

.4650 24504650 63.10

.4655 24504655 63.10

.4660 24504660 63.10

.4665 24504665 63.10

.4670 24504670 63.10

.4675 24504675 63.10

.4680 24504680 63.10

.4685 2450119 63.10

.4690 24504690 63.10

.4695 24504695 63.10

.4700 24504700 63.10

.4705 24504705 63.10

.4710 24504710 63.10

.4715 24504715 63.10

.4720 24504720 63.10

.4725 24504725 67.65

.4730 24504730 67.65

.4735 24504735 67.65

.4740 24504740 67.65

.4745 24504745 67.65

.4750 24504750 67.65

.4755 24504755 67.65

.4760 24504760 67.65

.4765 24504765 67.65

TOOLDIAM.

EDP NO.

PRICE

.3570 24503570 $53.35

.3575 24503575 53.35

.3580 24503580 53.35

.3585 24503585 53.35

.3590 24503590 53.35

.3595 24503595 53.35

.3600 24503600 53.35

.3605 24503605 53.35

.3610 24503610 53.35

.3615 24503615 53.35

.3620 24503620 53.35

.3625 24503625 53.35

.3630 24503630 53.35

.3635 24503635 53.35

.3640 24503640 53.35

.3645 24503645 53.35

.3650 24503650 53.35

.3655 24503655 53.35

.3660 24503660 53.35

.3665 24503665 53.35

.3670 24503670 53.35

.3675 24503675 53.35

.3680 24503680 53.35

.3685 24503685 53.35

.3690 24503690 53.35

.3695 24503695 53.35

.3700 24503700 53.35

.3705 24503705 53.35

.3710 24503710 53.35

.3715 24503715 53.35

.3720 24503720 53.35

.3725 24503725 53.35

.3730 24503730 53.35

.3735 24503735 53.35

.3740 2450095 53.35

.3745 24503745 53.35

.3750 245012 42.65

.3755 24503755 53.35

.3760 24503760 53.35

.3765 24503765 53.35

.3770 24503770 53.35

.3775 24503775 53.35

.3780 2450096 53.35

.3785 24503785 55.50

.3790 24503790 55.50

.3795 24503795 55.50

.3800 24503800 55.50

.3805 24503805 55.50

.3810 24503810 55.50

.3815 24503815 55.50

.3820 24503820 55.50

.3825 24503825 55.50

.3830 24503830 55.50

.3835 24503835 55.50

.3840 24503840 55.50

.3845 24503845 55.50

.3850 24503850 55.50

.3855 24503855 55.50

.3860 24503860 55.50

.3865 24503865 55.50

TOOLDIAM.

EDP NO.

PRICE

.3870 24503870 $55.50

.3875 24503875 55.50

.3880 24503880 55.50

.3885 24503885 55.50

.3890 24503890 55.50

.3895 24503895 55.50

.3900 24503900 55.50

.3905 24503905 55.50

.3910 24503910 55.50

.3915 24503915 55.50

.3920 24503920 55.50

.3925 24503925 55.50

.3930 24503930 55.50

.3935 24503935 55.50

.3940 24503940 55.50

.3945 24503945 55.50

.3950 24503950 55.50

.3955 24503955 55.50

.3960 24503960 55.50

.3965 24503965 55.50

.3970 24503970 55.50

.3975 24503975 55.50

.3980 24503980 55.50

.3985 24503985 55.50

.3990 24503990 55.50

.3995 24503995 55.50

.4000 24504000 55.50

.4005 24504005 55.50

.4010 24504010 55.50

.4015 24504015 55.50

.4020 24504020 55.50

.4025 24504025 55.50

.4030 24504030 55.50

.4035 24504035 55.50

.4040 24504040 55.50

.4045 24504045 55.50

.4050 24504050 55.50

.4055 2450103 55.50

.4060 24504060 55.50

.4065 24504065 55.50

.4070 24504070 55.50

.4075 24504075 55.50

.4080 24504080 55.50

.4085 24504085 55.50

.4090 24504090 55.50

.4095 24504095 59.10

.4100 24504100 59.10

.4105 24504105 59.10

.4110 24504110 59.10

.4115 24504115 59.10

.4120 24504120 59.10

.4125 24504125 59.10

.4130 24504130 59.10

.4135 24504135 59.10

.4140 24504140 59.10

.4145 24504145 59.10

.4150 24504150 59.10

.4155 24504155 59.10

.4160 24504160 59.10

.4165 24504165 59.10

TOOLDIAM.

EDP NO.

PRICE

.4170 24504170 $59.10

.4175 24504175 59.10

.4180 24504180 59.10

.4185 24504185 59.10

.4190 24504190 59.10

.4195 24504195 59.10

.4200 24504200 59.10

.4205 24504205 59.10

.4210 24504210 59.10

.4215 24504215 59.10

.4220 24504220 59.10

.4225 24504225 59.10

.4230 24504230 59.10

.4235 24504235 59.10

.4240 24504240 59.10

.4245 24504245 59.10

.4250 24504250 59.10

.4255 24504255 59.10

.4260 24504260 59.10

.4265 24504265 59.10

.4270 24504270 59.10

.4275 24504275 59.10

.4280 24504280 59.10

.4285 24504285 59.10

.4290 24504290 59.10

.4295 24504295 59.10

.4300 24504300 59.10

.4305 24504305 59.10

.4310 24504310 59.10

.4315 24504315 59.10

.4320 24504320 59.10

.4325 24504325 59.10

.4330 24504330 59.10

.4335 24504335 59.10

.4340 24504340 59.10

.4345 24504345 59.10

.4350 24504350 59.10

.4355 24504355 59.10

.4360 24504360 59.10

.4365 24504365 59.10

.4370 2450111 59.10

.4375 245014 48.45

.4380 24504380 59.10

.4385 24504385 59.10

.4390 24504390 59.10

.4395 24504395 59.10

.4400 24504400 59.10

.4405 24504405 59.10

.4410 24504410 59.10

.4415 24504415 63.10

.4420 24504420 63.10

.4425 24504425 63.10

.4430 24504430 63.10

.4435 24504435 63.10

.4440 24504440 63.10

.4445 24504445 63.10

.4450 24504450 63.10

.4455 24504455 63.10

.4460 24504460 63.10

.4465 24504465 63.10


CHUCKING REAMERS


MADE IN USA


TOOLDIAM.

EDP NO.

PRICE

.4770 24504770 $67.65

.4775 24504775 67.65

.4780 24504780 67.65

.4785 24504785 67.65

.4790 24504790 67.65

.4795 24504795 67.65

.4800 24504800 67.65

.4805 24504805 67.65

.4810 24504810 67.65

.4815 24504815 67.65

.4820 24504820 67.65

.4825 24504825 67.65

.4830 24504830 67.65

.4835 24504835 67.65

.4840 24504840 67.65

.4845 24504845 67.65

.4850 24504850 67.65

.4855 24504855 67.65

.4860 24504860 67.65

.4865 24504865 67.65

.4870 24504870 67.65

.4875 24504875 67.65

.4880 24504880 67.65

.4885 24504885 67.65

.4890 24504890 67.65

.4895 24504895 67.65

.4900 24504900 67.65

.4905 24504905 67.65

.4910 24504910 67.65

.4915 24504915 67.65

.4920 24504920 67.65

.4925 24504925 67.65

.4930 24504930 67.65

.4935 24504935 67.65

.4940 24504940 67.65

.4945 24504945 67.65

.4950 24504950 67.65

.4955 24504955 67.65

.4960 24504960 67.65

.4965 24504965 67.65

.4970 24504970 67.65

.4975 24504975 67.65

.4980 24504980 67.65

.4985 24504985 67.65

.4990 24504990 67.65

.4995 24504995 67.65

.5000 245016 56.00

.5005 24505005 67.65

.5010 24505010 67.65

.5015 24505015 67.65

.5020 24505020 67.65

.5025 24505025 67.65

.5030 24505030 67.65

.5035 24505035 69.10

.5040 24505040 69.10

.5045 24505045 69.10

.5050 24505050 69.10

.5055 24505055 69.10

.5060 24505060 69.10

.5065 24505065 69.10

TOOLDIAM.

EDP NO.

PRICE

.5970 24505970 $71.40

.5975 24505975 71.40

.5980 24505980 71.40

.5985 24505985 71.40

.5990 24505990 71.40

.5995 24505995 71.40

.6000 24506000 71.40

.6005 24506005 71.40

.6010 24506010 71.40

.6015 24506015 71.40

.6020 24506020 71.40

.6025 24506025 71.40

.6030 24506030 71.40

.6035 24506035 71.40

.6040 24506040 71.40

.6045 24506045 71.40

.6050 24506050 71.40

.6055 24506055 71.40

.6060 24506060 71.40

.6065 24506065 71.40

.6070 24506070 71.40

.6075 24506075 71.40

.6080 24506080 71.40

.6085 24506085 71.40

.6090 24506090 71.40

.6095 24506095 71.40

.6100 24506100 71.40

.6105 24506105 71.40

.6110 24506110 71.40

.6115 24506115 71.40

.6120 24506120 71.40

.6125 24506125 71.40

.6130 24506130 71.40

.6135 24506135 71.40

.6140 24506140 71.40

.6145 24506145 71.40

.6150 24506150 71.40

.6155 24506155 71.40

.6160 24506160 71.40

.6165 24506165 71.40

.6170 24506170 71.40

.6175 24506175 71.40

.6180 24506180 71.40

.6185 24506185 71.40

.6190 24506190 71.40

.6195 24506195 71.40

.6200 24506200 71.40

.6205 24506205 71.40

.6210 24506210 71.40

.6215 24506215 71.40

.6220 2450158 71.40

.6225 24506225 71.40

.6230 24506230 71.40

.6235 24506235 71.40

.6240 24506240 71.40

.6245 24506245 71.40

.6250 245020 59.90

.6255 24506255 71.40

.6260 2450159 71.40

.6265 24506265 71.40

TOOLDIAM.

EDP NO.

PRICE

.5070 24505070 $69.10

.5075 24505075 69.10

.5080 24505080 69.10

.5085 24505085 69.10

.5090 24505090 69.10

.5095 24505095 69.10

.5100 24505100 69.10

.5105 24505105 69.10

.5110 24505110 69.10

.5115 24505115 69.10

.5120 24505120 69.10

.5125 24505125 69.10

.5130 24505130 69.10

.5135 24505135 69.10

.5140 24505140 69.10

.5145 24505145 69.10

.5150 24505150 69.10

.5155 24505155 69.10

.5160 24505160 69.10

.5165 24505165 69.10

.5170 24505170 69.10

.5175 24505175 69.10

.5180 24505180 69.10

.5185 24505185 69.10

.5190 24505190 69.10

.5195 24505195 69.10

.5200 24505200 69.10

.5205 24505205 69.10

.5210 24505210 69.10

.5215 24505215 69.10

.5220 24505220 69.10

.5225 24505225 69.10

.5230 24505230 69.10

.5235 24505235 69.10

.5240 24505240 69.10

.5245 24505245 69.10

.5250 24505250 69.10

.5255 24505255 69.10

.5260 24505260 69.10

.5265 24505265 69.10

.5270 24505270 69.10

.5275 24505275 69.10

.5280 24505280 69.10

.5285 24505285 69.10

.5290 24505290 69.10

.5295 24505295 69.10

.5300 24505300 69.10

.5305 24505305 69.10

.5310 24505310 69.10

.5315 2450135 69.10

.5320 24505320 69.10

.5325 24505325 69.10

.5330 24505330 69.10

.5335 24505335 69.10

.5340 24505340 69.10

.5345 24505345 69.10

.5350 24505350 69.10

.5355 24505355 69.10

.5360 24505360 69.10

.5365 24505365 69.10

TOOLDIAM.

EDP NO.

PRICE

.5370 24505370 $69.10

.5375 24505375 69.10

.5380 24505380 69.10

.5385 24505385 69.10

.5390 24505390 69.10

.5395 24505395 69.10

.5400 24505400 69.10

.5405 24505405 69.10

.5410 24505410 69.10

.5415 24505415 69.10

.5420 24505420 69.10

.5425 24505425 69.10

.5430 24505430 69.10

.5435 24505435 69.10

.5440 24505440 69.10

.5445 24505445 69.10

.5450 24505450 69.10

.5455 24505455 69.10

.5460 24505460 69.10

.5465 24505465 69.10

.5470 24505470 69.10

.5475 24505475 69.10

.5480 24505480 69.10

.5485 24505485 69.10

.5490 24505490 69.10

.5495 24505495 69.10

.5500 24505500 69.10

.5505 24505505 69.10

.5510 24505510 69.10

.5515 24505515 69.10

.5520 24505520 69.10

.5525 24505525 69.10

.5530 24505530 69.10

.5535 24505535 69.10

.5540 24505540 69.10

.5545 24505545 69.10

.5550 24505550 69.10

.5555 24505555 69.10

.5560 24505560 69.10

.5565 24505565 69.10

.5570 24505570 69.10

.5575 24505575 69.10

.5580 24505580 69.10

.5585 24505585 69.10

.5590 24505590 69.10

.5595 24505595 69.10

.5600 24505600 69.10

.5605 24505605 69.10

.5610 24505610 69.10

.5615 24505615 69.10

.5620 24505620 69.10

.5625 245018 57.65

.5630 2450143 69.10

.5635 24505635 69.10

.5640 24505640 69.10

.5645 24505645 69.10

.5650 24505650 69.10

.5655 24505655 69.10

.5660 24505660 69.10

.5665 24505665 71.40

TOOLDIAM.

EDP NO.

PRICE

.5670 24505670 $71.40

.5675 24505675 71.40

.5680 24505680 71.40

.5685 24505685 71.40

.5690 24505690 71.40

.5695 24505695 71.40

.5700 24505700 71.40

.5705 24505705 71.40

.5710 24505710 71.40

.5715 24505715 71.40

.5720 24505720 71.40

.5725 24505725 71.40

.5730 24505730 71.40

.5735 24505735 71.40

.5740 24505740 71.40

.5745 24505745 71.40

.5750 24505750 71.40

.5755 24505755 71.40

.5760 24505760 71.40

.5765 24505765 71.40

.5770 24505770 71.40

.5775 24505775 71.40

.5780 24505780 71.40

.5785 24505785 71.40

.5790 24505790 71.40

.5795 24505795 71.40

.5800 24505800 71.40

.5805 24505805 71.40

.5810 24505810 71.40

.5815 24505815 71.40

.5820 24505820 71.40

.5825 24505825 71.40

.5830 24505830 71.40

.5835 24505835 71.40

.5840 24505840 71.40

.5845 24505845 71.40

.5850 24505850 71.40

.5855 24505855 71.40

.5860 24505860 71.40

.5865 24505865 71.40

.5870 24505870 71.40

.5875 24505875 71.40

.5880 24505880 71.40

.5885 24505885 71.40

.5890 24505890 71.40

.5895 24505895 71.40

.5900 24505900 71.40

.5905 24505905 71.40

.5910 24505910 71.40

.5915 24505915 71.40

.5920 24505920 71.40

.5925 24505925 71.40

.5930 24505930 71.40

.5935 24505935 71.40

.5940 24505940 71.40

.5945 2450151 71.40

.5950 24505950 71.40

.5955 24505955 71.40

.5960 24505960 71.40

.5965 24505965 71.40

CHUCKING REAMERS



MADE IN USA


TOOLDIAMETER

HOLEDIAM.LARGE

END

FITSARBOR

NO.

LENGTH NO.OF

FLUTES

TYPE 2431EDP NO.

PRICESPECIAL

DECIMALSIZE RANGE



¾ .7500 3⁄8 4 1 ¾ 2 ¼ 6 243124 $160.20 0.7221 - 0.7530 $226.60 $193.40 $182.20 $176.90 $171.25 $166.8025⁄32 .7812 3⁄8 4 1 ¾ 2 ¼ 6 243125 163.35 0.7531 - 0.7840 229.70 196.40 185.40 180.05 174.35 169.9013⁄16 .8125 ½ 5 1 15⁄16 2 ½ 6 243126 163.35 0.7841 - 0.8160 229.70 196.40 185.40 180.05 174.35 169.907⁄8 .8750 ½ 5 1 15⁄16 2 ½ 6 243128 182.55 0.8161 - 0.8780 251.45 216.90 205.30 199.90 193.95 189.25

15⁄16 .9375 ½ 5 1 15⁄16 2 ½ 8 243130 182.55 0.8781 - 0.9410 251.45 216.90 205.30 199.90 193.95 189.251 1.0000 ½ 5 1 15⁄16 2 ½ 8 243132 185.85 0.9411 - 1.0030 254.70 220.20 208.70 203.20 197.20 192.601 1⁄16 1.0625 5⁄8 6 2 1⁄8 2 ¾ 8 243134 192.35 1.0031 - 1.0660 261.20 226.70 215.05 209.65 203.75 199.051 1⁄8 1.1250 5⁄8 6 2 1⁄8 2 ¾ 8 243136 195.55 1.0661 - 1.1280 264.40 229.95 218.35 212.90 206.95 202.35

1 3⁄16 1.1875 5⁄8 6 2 1⁄8 2 ¾ 8 243138 198.90 1.1281 - 1.1905 267.65 233.25 221.65 216.20 210.25 205.651 ¼ 1.2500 5⁄8 6 2 1⁄8 2 ¾ 8 243140 211.90 1.1906 - 1.2530 280.75 246.25 234.70 229.15 223.35 218.601 5⁄16 1.3125 ¾ 7 2 ¼ 3 8 243142 215.05 1.2531 - 1.3155 283.95 249.50 237.95 232.45 226.60 221.901 3⁄8 1.3750 ¾ 7 2 ¼ 3 8 243144 221.60 1.3156 - 1.3780 290.50 255.95 244.45 238.90 233.00 228.40

1 7⁄16 1.4375 ¾ 7 2 ¼ 3 8 243146 228.15 1.3781 - 1.4405 297.00 262.50 251.00 245.50 239.50 234.951 ½ 1.5000 ¾ 7 2 ¼ 3 8 243148 237.95 1.4406 - 1.5030 306.80 272.30 260.75 255.25 249.30 244.701 9⁄16 1.5625 ¾ 7 2 ¼ 3 10 243150 275.50 1.5031 - 1.5660 347.30 311.40 299.30 293.50 287.30 282.501 5⁄8 1.6250 ¾ 7 2 ¼ 3 10 243152 289.05 1.5661 - 1.6280 360.95 324.95 312.85 307.15 300.95 296.10

1 11⁄16 1.6875 1 8 2 ¾ 3 ½ 10 243154 312.90 1.6281 - 1.6910 384.85 348.80 336.75 331.00 324.85 320.001 ¾ 1.7500 1 8 2 ¾ 3 ½ 10 243156 312.90 1.6911 - 1.7530 384.85 348.80 336.75 331.00 324.85 320.001 13⁄16 1.8125 1 8 2 ¾ 3 ½ 10 243158 336.65 1.7531 - 1.8160 408.45 372.55 360.45 354.75 348.55 343.701 7⁄8 1.8750 1 8 2 ¾ 3 ½ 10 243160 336.65 1.8161 - 1.8780 408.45 372.55 360.45 354.75 348.55 343.70

1 15⁄16 1.9375 1 8 2 ¾ 3 ½ 10 243162 360.55 1.8781 - 1.9410 432.30 396.35 384.30 378.65 372.45 367.602 2.0000 1 8 2 ¾ 3 ½ 10 243164 360.55 1.9411 - 2.0030 432.30 396.35 384.30 378.65 372.45 367.602 1⁄16 2.0625 1 ¼ 9 2 7⁄8 3 ¾ 12 243166 387.70 2.0031 - 2.0660 459.55 423.60 411.50 405.80 399.60 394.802 1⁄8 2.1250 1 ¼ 9 2 7⁄8 3 ¾ 12 243168 387.70 2.0661 - 2.1280 459.55 423.60 411.50 405.80 399.60 394.80

2 3⁄16 2.1875 1 ¼ 9 2 7⁄8 3 ¾ 12 243170 421.70 2.1281 - 2.1905 493.55 457.55 445.50 439.75 433.65 428.702 ¼ 2.2500 1 ¼ 9 2 7⁄8 3 ¾ 12 243172 421.70 2.1906 - 2.2530 493.55 457.55 445.50 439.75 433.65 428.702 5⁄16 2.3125 1 ¼ 9 2 7⁄8 3 ¾ 12 243174 445.50 2.2531 - 2.3155 517.40 481.35 469.35 463.55 457.40 452.552 3⁄8 2.3750 1 ¼ 9 2 7⁄8 3 ¾ 12 243176 445.50 2.3156 - 2.3780 517.40 481.35 469.35 463.55 457.40 452.55

2 7⁄16 2.4375 1 ¼ 9 2 7⁄8 3 ¾ 12 243178 469.40 2.3781 - 2.4405 541.25 505.25 493.20 487.45 481.25 476.402 ½ 2.5000 1 ¼ 9 2 7⁄8 3 ¾ 12 243180 469.40 2.4406 - 2.5030 541.25 505.25 493.20 487.45 481.25 476.402 9⁄16 2.5625 1 ½ 10 3 1⁄8 4 14 243182 515.25 2.5031 - 2.5660 587.05 551.05 539.05 533.30 527.15 522.252 5⁄8 2.6250 1 ½ 10 3 1⁄8 4 14 243184 534.35 2.5661 - 2.6280 606.15 570.10 558.20 552.35 546.20 541.35

2 11⁄16 2.6875 1 ½ 10 3 1⁄8 4 14 243186 555.10 2.6281 - 2.6910 626.95 590.95 578.90 573.20 567.00 562.152 ¾ 2.7500 1 ½ 10 3 1⁄8 4 14 243188 574.35 2.6911 - 2.7530 646.25 610.20 598.15 592.45 586.30 581.402 13⁄16 2.8125 1 ½ 10 3 1⁄8 4 14 243190 594.55 2.7531 - 2.8160 666.40 630.40 618.40 612.65 606.50 601.652 7⁄8 2.8750 1 ½ 10 3 1⁄8 4 14 243192 618.40 2.8161 - 2.8780 690.15 654.25 642.15 636.50 630.30 625.45

2 15⁄16 2.9375 1 ½ 10 3 1⁄8 4 14 243194 642.25 2.8781 - 2.9410 714.10 678.10 666.00 660.35 654.20 649.303 3.0000 1 ½ 10 3 1⁄8 4 14 243196 666.10 2.9411 - 3.0030 737.90 702.00 689.90 684.25 678.05 673.20

SHELL REAMERS CARBIDE TIPPED - STRAIGHT FLUTES

TYPE 2431 - FINISHED FRACTIONAL SIZESStraight polished >utes.Carbide tips brazed to hardened alloy steel bodies.Arbor hole tapered 1/8” per foot: Drive slots.Cutting diameter tolerance: thru 1” diameter: +.0001” , +.0005”. over 1” diameter: +.0002”, +.0006”.Shell reamers are used with an arbor which is tapered to Qt the holein the reamer. Drive slots in the reamer engage lugs on the arbor tosupplement the rotational drive from the tapered arbor. The spacebetween the reamer’s drive end and the arbor collar permits easyremoval of the shell reamer by prying.

OPTIONS:Decimal sizes priced below.Cut diam. reduced for step or pilot.End chamfer other than 45˚.End cutting or corner radius.Increased or decreased back taper.


MADE IN USA


TOOLDIAMETER MORSE

TAPER

N0.OF

FLUTES

LENGTHTYPE 2452

EDP NO.PRICE

SPECIALDECIMAL

SIZE RANGE



¼ .2500 1 4 1 ½ 6 245208 $46.40 0.2381 - 0.2530 $78.70 $62.55 $57.10 $54.50 $51.75 $49.509⁄32 .2812 1 4 1 ½ 6 245209 47.00 0.2531 - 0.2840 79.35 63.20 57.75 55.15 52.35 50.205⁄16 .3125 1 4 1 ½ 6 245210 47.00 0.2841 - 0.3150 79.35 63.20 57.75 55.15 52.35 50.2011⁄32 .3438 1 4 1 ½ 6 245211 48.05 0.3151 - 0.3470 80.40 64.25 58.85 56.20 53.40 51.25

3⁄8 .3750 1 4 1 ¾ 7 245212 48.60 0.3471 - 0.3780 80.95 64.75 59.30 56.75 53.95 51.8513⁄32 .4062 1 4 1 ¾ 7 245213 51.20 0.3781 - 0.4090 83.55 67.25 61.90 59.30 56.60 54.407⁄16 .4375 1 4 1 ¾ 7 245214 54.55 0.4091 - 0.4410 86.85 70.70 65.30 62.70 59.95 57.7515⁄32 .4688 1 4 1 ¾ 7 245215 55.70 0.4411 - 0.4720 88.05 71.75 66.45 63.80 61.05 58.90

½ .5000 1 6 2 8 245216 60.05 0.4721 - 0.5030 94.60 77.25 71.50 68.75 65.75 63.4517⁄32 .5312 1 6 2 8 245217 65.75 0.5031 - 0.5340 100.40 83.05 77.20 74.45 71.50 69.109⁄16 .5625 1 6 2 8 245218 65.75 0.5341 - 0.5660 100.40 83.05 77.20 74.45 71.50 69.1019⁄32 .5938 1 6 2 8 245219 68.80 0.5661 - 0.5970 103.40 86.05 80.30 77.55 74.55 72.20

5⁄8 .6250 2 6 2 9 245220 68.80 0.5971 - 0.6280 103.40 86.05 80.30 77.55 74.55 72.2021⁄32 .6562 2 6 2 9 245221 70.05 0.6281 - 0.6590 104.75 87.35 81.50 78.80 75.80 73.5011⁄16 .6875 2 6 2 9 245222 70.05 0.6591 - 0.6910 104.75 87.35 81.50 78.80 75.80 73.5023⁄32 .7188 2 6 2 9 245223 71.05 0.6911 - 0.7220 105.75 88.35 82.50 79.75 76.80 74.45

¾ .7500 2 6 2 9 ½ 245224 73.35 0.7221 - 0.7530 107.95 90.60 84.80 82.05 79.00 76.7525⁄32 .7812 2 6 2 9 ½ 245225 73.90 0.7531 - 0.7840 108.55 91.20 85.40 82.55 79.65 77.2513⁄16 .8125 2 6 2 9 ½ 245226 75.65 0.7841 - 0.8160 110.20 92.80 87.10 84.30 81.35 78.9527⁄32 .8438 2 6 2 9 ½ 245227 78.90 0.8161 - 0.8470 113.55 96.20 90.35 87.65 84.65 82.35

7⁄8 .8750 2 6 2 ¼ 10 245228 81.95 0.8471 - 0.8780 117.85 99.85 93.75 91.00 87.80 85.5029⁄32 .9062 2 6 2 ¼ 10 245229 92.25 0.8781 - 0.9090 128.15 110.20 104.20 101.30 98.15 95.8015⁄16 .9375 3 8 2 ¼ 10 245230 95.95 0.9091 - 0.9410 131.80 113.85 107.85 104.95 101.85 99.5031⁄32 .9688 3 8 2 ¼ 10 245231 99.90 0.9411 - 0.9720 135.85 117.85 111.80 108.95 105.85 103.45

1 1.0000 3 8 2 ¼ 10 ½ 245232 99.90 0.9721 - 1.0030 135.85 117.85 111.80 108.95 105.85 103.451 1⁄16 1.0625 3 8 2 ¼ 10 ½ 245234 136.95 1.0031 - 1.0660 171.35 154.05 148.30 145.60 142.60 140.301 1⁄8 1.1250 3 8 2 ¼ 11 245236 147.45 1.0661 - 1.1280 181.90 164.65 158.95 156.15 153.15 150.851 3⁄16 1.1875 3 8 2 ¼ 11 245238 158.45 1.1281 - 1.1905 192.85 175.65 169.85 167.10 164.20 161.80

1 ¼ 1.2500 4 8 2 ½ 11 ½ 245240 168.40 1.1906 - 1.2530 202.80 185.55 179.85 177.00 174.05 171.751 5⁄16 1.3125 4 8 2 ½ 11 ½ 245242 190.15 1.2531 - 1.3155 224.55 207.35 201.50 198.85 195.85 193.501 3⁄8 1.3750 4 8 2 ½ 12 245244 217.25 1.3156 - 1.3780 251.65 234.45 228.60 225.90 222.90 220.601 7⁄16 1.4375 4 8 2 ½ 12 245246 226.75 1.3781 - 1.4405 261.20 243.95 238.15 235.50 232.45 230.15

1 ½ 1.5000 4 8 2 ½ 12 ½ 245248 236.20 1.4406 - 1.5030 270.65 253.45 247.70 244.90 241.95 239.60

CHUCKING REAMERS CARBIDE TIPPED - STRAIGHT FLUTE LONG CARBIDE - TAPER SHANK

TYPE 2452 - FINISHED FRACTIONAL SIZESTaper shank and straight polished >utes.Flute long carbide brazed to one piece hardened alloysteel bodies.Cutting diameter tolerance plus .0003” minus .0000”.

USE:For all general reaming.Especially designed with >ute long carbide for deephole reaming to precision tolerances and for longproduction runs.

OPTIONS:Intermediate decimal sizes (priced as indicated inextended table below).Cutting diameter reduced for small steps or pilot.Radius end or end chamfer other than 45˚.End cutting.Rose grind (twice normal back taper).Closer tolerance.For +.0002” add $1.00 per tool.For +.0001” add $3.00 per tool.


MADE IN USA


TOOLDIAMETER

TYPE2452

METRICEDP NO.

METRICPRICE


SIZE RANGE


MORSETAPER

NO. OFFLUTES

LENGTH


FLUTE &CARBIDE

OVER-ALL

6.0 .2362 2452060 $57.10 1 4 1 ½ 6 6.000-6.426 $81.40 $65.30 $59.90 $57.20 $54.50 $52.25 $49.156.5 .2559 2452065 57.75 1 4 1 ½ 6 6.427-7.214 82.05 65.95 60.55 57.90 55.15 52.95 49.807.0 .2756 2452070 57.75 1 4 1 ½ 6 - - - - - - - -7.5 .2953 2452075 57.75 1 4 1 ½ 6 7.215-8.001 82.05 65.95 60.55 57.90 55.15 52.95 49.80

8.0 .3150 2452080 57.75 1 4 1 ½ 6 - - - - - - - -8.5 .3346 2452085 58.85 1 4 1 ½ 6 8.002-8.814 83.15 67.00 61.60 58.95 56.20 53.95 50.909.0 .3543 2452090 59.30 1 4 1 ¾ 7 8.815-9.601 83.65 67.60 62.10 59.40 56.75 54.50 51.359.5 .3740 2452095 59.30 1 4 1 ¾ 7 - - - - - - - -

10.0 .3937 2452100 61.90 1 4 1 ¾ 7 9.602-10.389 86.30 70.05 64.65 62.05 59.30 57.10 53.9510.5 .4134 2452105 65.30 1 4 1 ¾ 7 10.390-11.201 89.55 73.45 68.05 65.45 62.70 60.40 57.3511.0 .4331 2452110 65.30 1 4 1 ¾ 7 - - - - - - - -11.5 .4528 2452115 66.45 1 4 1 ¾ 7 11.202-11.989 90.75 74.55 69.15 66.55 63.80 61.60 58.40

12.0 .4724 2452120 71.50 1 6 2 8 11.990-12.776 97.55 80.30 74.45 71.60 68.75 66.30 63.0012.5 .4921 2452125 71.50 1 6 2 8 - - - - - - - -13.0 .5118 2452130 77.20 1 6 2 8 12.777-13.564 103.30 85.95 80.25 77.45 74.45 72.10 68.7513.5 .5315 2452135 77.20 1 6 2 8 - - - - - - - -

14.0 .5512 2452140 77.20 1 6 2 8 13.565-14.376 103.30 85.95 80.25 77.45 74.45 72.10 68.7514.5 .5709 2452145 80.30 1 6 2 8 14.377-15.164 106.30 89.10 83.25 80.40 77.55 75.05 71.7515.0 .5906 2452150 80.30 1 6 2 8 - - - - - - - -15.5 .6102 2452155 80.30 2 6 2 9 15.165-15.951 106.30 89.10 83.25 80.40 77.55 75.05 71.75

16.0 .6299 2452160 81.50 2 6 2 9 15.952-16.739 107.60 90.30 84.55 81.65 78.80 76.45 73.0516.5 .6496 2452165 81.50 2 6 2 9 - - - - - - - -17.0 .6693 2452170 81.50 2 6 2 9 16.740-17.551 107.60 90.30 84.55 81.65 78.80 76.45 73.0517.5 .6890 2452175 81.50 2 6 2 9 - - - - - - - -

18.0 .7087 2452180 82.50 2 6 2 9 17.552-18.339 108.60 91.30 85.55 82.70 79.75 77.45 74.0018.5 .7283 2452185 84.80 2 6 2 9 ½ 18.340-19.126 110.90 93.55 87.75 84.90 82.05 79.65 76.3519.0 .7480 2452190 84.80 2 6 2 9 ½ - - - - - - - -19.5 .7677 2452195 85.40 2 6 2 9 ½ 19.127-19.914 111.40 94.20 88.35 85.55 82.55 80.25 76.85

20.0 .7874 2452200 87.10 2 6 2 9 ½ 19.915-20.726 113.15 95.80 90.05 87.20 84.30 81.90 78.6020.5 .8071 2452205 87.10 2 6 2 9 ½ - - - - - - - -21.0 .8268 2452210 90.35 2 6 2 9 ½ 20.727-21.514 116.45 99.15 93.40 90.50 87.65 85.30 81.9021.5 .8465 2452215 90.35 2 6 2 9 ½ - - - - - - - -

22.0 .8661 2452220 90.35 2 6 2 ¼ 10 21.515-22.301 116.45 99.15 93.40 90.50 87.65 85.30 81.9022.5 .8858 2452225 104.20 2 6 2 ¼ 10 22.302-23.089 131.20 113.25 107.20 104.30 101.30 98.80 95.4023.0 .9055 2452230 104.20 2 6 2 ¼ 10 - - - - - - - -23.5 .9252 2452235 107.85 3 8 2 ¼ 10 23.090-23.901 134.85 116.90 110.95 107.95 104.95 102.45 99.05

24.0 .9449 2452240 111.80 3 8 2 ¼ 10 23.902-24.689 138.85 120.90 114.90 112.00 108.95 106.50 102.9524.5 .9646 2452245 111.80 3 8 2 ¼ 10 - - - - - - - -25.0 .9843 2452250 111.80 3 8 2 ¼ 10 ½ 24.690-25.476 138.85 120.90 114.90 112.00 108.95 106.50 102.9525.5 1.0039 2452255 148.30 3 8 2 ¼ 10 ½ 25.477-27.076 174.25 157.10 151.25 148.45 145.60 143.20 139.90

26.0 1.0236 2452260 148.30 3 8 2 ¼ 10 ½ - - - - - - - -27.0 1.0630 2452270 148.30 3 8 2 ¼ 10 ½ - - - - - - - -28.0 1.1024 2452280 158.95 3 8 2 ¼ 11 27.077-28.651 184.80 167.65 161.80 159.05 156.15 153.75 150.4529.0 1.1417 2452290 169.85 3 8 2 ¼ 11 28.652-30.239 195.80 178.60 172.80 170.00 167.10 164.70 161.45

30.0 1.1811 2452300 169.85 3 8 2 ¼ 11 - - - - - - - -31.0 1.2205 2452310 179.85 4 8 2 ½ 11 ½ 30.240-31.826 205.70 188.50 182.75 179.95 177.00 174.65 171.3532.0 1.2598 2452320 201.50 4 8 2 ½ 11 ½ 31.827-33.414 227.50 210.25 204.55 201.65 198.85 196.35 193.0533.0 1.2992 2452330 201.50 4 8 2 ½ 11 ½ - - - - - - - -

34.0 1.3386 2452340 228.60 4 8 2 ½ 12 33.415-35.001 254.55 237.40 231.60 228.85 225.90 223.50 220.2035.0 1.3780 2452350 228.60 4 8 2 ½ 12 - - - - - - - -36.0 1.4173 2452360 238.15 4 8 2 ½ 12 35.002-36.589 264.05 246.85 241.15 238.30 235.50 233.00 229.6537.0 1.4567 2452370 247.70 4 8 2 ½ 12 ½ 36.590-38.176 273.60 256.35 250.60 247.85 244.90 242.55 239.25

38.0 1.4961 2452380 247.70 4 8 2 ½ 12 ½ - - - - - - - -

CHUCKING REAMERS CARBIDE TIPPED - STRAIGHT FLUTE LONG CARBIDE & TAPER SHANK


TYPE 2452 - METRIC

MADE IN USA


TOOLDIAMETER MAX.

SHANKDIAMETER

NO.OF

FLUTES

LENGTHTYPE 2480

EDP NO.PRICE

SPECIALDECIMAL

SIZE RANGE


FRAC. DECIMALFLUTE & CARBIDE

OVERALL 1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14*

3⁄16 .1875 .1805 4 1 1⁄8 4 ½ 248006 $48.35 0.1770 - 0.2040 $80.65 $64.50 $59.05 $56.50 $53.75 $51.5013⁄64 .2031 .1805 4 1 1⁄8 4 ½ 24802031 48.35 - - - - - - -7⁄32 .2188 .2075 4 1 ¼ 5 248007 48.35 0.2041 - 0.2210 80.65 64.50 59.05 56.50 53.75 51.5015⁄64 .2344 .2265 4 1 ½ 6 24802344 48.35 0.2211 - 0.2380 80.65 64.50 59.05 56.50 53.75 51.50

¼ .2500 .2405 4 1 ½ 6 248008 48.35 0.2381 - 0.2530 80.65 64.50 59.05 56.50 53.75 51.5017⁄64 .2656 .2485 4 1 ½ 6 24802656 49.40 - - - - - - -9⁄32 .2812 .2485 4 1 ½ 6 248009 49.40 0.2531 - 0.2840 81.65 65.55 60.10 57.60 54.75 52.6519⁄64 .2969 .2792 4 1 ½ 6 24802969 49.40 - - - - - - -

5⁄16 .3125 .2792 4 1 ½ 6 248010 49.40 0.2841 - 0.3150 81.65 65.55 60.10 57.60 54.75 52.6521⁄64 .3281 .2792 4 1 ½ 6 24803281 51.20 - - - - - - -11⁄32 .3438 .2792 4 1 ½ 6 248011 51.20 0.3151 - 0.3470 83.55 67.25 61.90 59.30 56.60 54.4023⁄64 .3594 .3105 4 1 ¾ 7 24803594 51.20 - - - - - - -

3⁄8 .3750 .3105 4 1 ¾ 7 248012 51.20 0.3471 - 0.3780 83.55 67.25 61.90 59.30 56.60 54.4025⁄64 .3906 .3105 4 1 ¾ 7 24803906 53.75 - - - - - - -13⁄32 .4062 .3105 4 1 ¾ 7 248013 53.75 0.3781 - 0.4090 85.95 69.85 64.45 61.85 59.05 56.8527⁄64 .4219 .3730 6 1 ¾ 7 24804219 62.20 - - - - - - -

7⁄16 .4375 .3730 6 1 ¾ 7 248014 62.20 0.4091 - 0.4410 94.55 78.35 72.95 70.40 67.65 65.4529⁄64 .4531 .3730 6 1 ¾ 7 24804531 62.80 - - - - - - -15⁄32 .4688 .3730 6 1 ¾ 7 248015 62.80 0.4411 - 0.4720 95.20 78.90 73.55 70.95 68.15 66.0031⁄64 .4844 .4355 6 2 8 24804844 67.25 - - - - - - -

½ .5000 .4355 6 2 8 248016 67.25 0.4721 - 0.5030 101.95 84.60 78.80 76.00 73.05 70.7533⁄64 .5156 .4355 6 2 8 24805156 69.20 - - - - - - -17⁄32 .5312 .4355 6 2 8 248017 69.20 0.5031 - 0.5340 103.85 86.50 80.65 77.90 74.95 72.6035⁄64 .5469 .4355 6 2 8 24805469 69.20 - - - - - - -

9⁄16 .5625 .4355 6 2 8 248018 69.20 0.5341 - 0.5660 103.85 86.50 80.65 77.90 74.95 72.6037⁄64 .5781 .4355 6 2 8 24805781 71.85 - - - - - - -19⁄32 .5938 .4355 6 2 8 248019 71.85 0.5661 - 0.5970 106.50 89.15 83.30 80.55 77.60 75.3039⁄64 .6094 .5615 6 2 ¼ 9 24806094 71.85 - - - - - - -

CHUCKING REAMERS CARBIDE TIPPED - FOR REAMING STEEL, TOUGH STEEL ALLOYS & CAST IRON

TYPE 2480 - FINISHED FRACTIONAL SIZESSteel cutting grade >ute long carbide brazed tohardened alloy steel bodies.Special steel cutting tool geometry: Positive radial rake (behind center). Narrow circular lands. Minimum back taper.Longer >utes for straighter holes.Straight shanks to ANSI speciQcations.

OPTIONS:Decimal sizes priced below.Cut diam. reduced for step or pilot.End chamfer other than 45˚.End cutting or corner radius.Short shank or undersize shank diam.Flat on shank or tanged shank.Closer tolerance.For +.0002” add $1.00 per tool.For +.0001” add $3.00 per tool.


USE:This carbide tipped reamer’s design is based on our extensive development and design experience in manufacturing special reamers for reaming steel in the automotive industry. This design is proven in an industry where performance is carefully evaluated.Traditional steel reaming problems have been reduced by the following:1. Holds size longer because steel cutting grade carbide is utilized — but not just any steel cutting grade carbide as we discovered only a few

domestic manufacturers’ carbide have the Qeld proven wear characteristics necessary when reaming tough abrasive materials.2. Contrary to the machinery data handbook our design utilizes a smaller positive radial rake — for better performance when reaming steel.3. Improved hole surface Qnish as this reamer’s reduced circular land minimizes possible material buildup that will reduce surface quality.4. Straighter holes because of longer full >ute length carbide and reduced back taper. Many more regrinds before reinserting.5. Controlled deep (-300˚F) cryogenic treatment after the carbide is brazed on the tool - also several other subtle features that only our tools

have.

MADE IN USA


TOOLDIAMETER MAX.

SHANKDIAMETER

N0.OF

FLUTES

LENGTHTYPE 2480

EDP NO.PRICE

SPECIALDECIMAL

SIZE RANGE




5⁄8 .6250 .5615 6 2 ¼ 9 248020 $71.85 0.5971 - 0.6280 $106.50 $89.15 $83.30 $80.55 $77.60 $75.3041⁄64 .6406 .5615 6 2 ¼ 9 24806406 73.20 - - - - - - -21⁄32 .6562 .5615 6 2 ¼ 9 248021 73.20 0.6281 - 0.6590 107.85 90.45 84.65 81.90 78.90 76.6043⁄64 .6719 .5615 6 2 ¼ 9 24806719 73.20 - - - - - - -

11⁄16 .6875 .5615 6 2 ¼ 9 248022 73.20 0.6591 - 0.6910 107.85 90.45 84.65 81.90 78.90 76.60

45⁄64 .7031 .5615 6 2 ¼ 9 24807031 76.55 - - - - - - -23⁄32 .7188 .5615 6 2 ¼ 9 248023 76.55 0.6911 - 0.7220 111.15 93.75 88.05 85.30 82.25 79.9047⁄64 .7344 .6245 6 2 ½ 9 ½ 24807344 76.55 - - - - - - -

¾ .7500 .6245 6 2 ½ 9 ½ 248024 76.55 0.7221 - 0.7530 111.15 93.75 88.05 85.30 82.25 79.9049⁄64 .7656 .6245 6 2 ½ 9 ½ 24807656 79.20 - - - - - - -25⁄32 .7812 .6245 6 2 ½ 9 ½ 248025 79.20 0.7531 - 0.7840 113.75 96.40 90.60 87.80 84.85 82.5051⁄64 .7969 .6245 6 2 ½ 9 ½ 24807969 79.20 - - - - - - -

13⁄16 .8125 .6245 6 2 ½ 9 ½ 248026 79.20 0.7841 - 0.8160 113.75 96.40 90.60 87.80 84.85 82.5053⁄64 .8281 .6245 6 2 ½ 9 ½ 24808281 82.35 - - - - - - -27⁄32 .8438 .6245 6 2 ½ 9 ½ 248027 82.35 0.8161 - 0.8470 116.90 99.55 93.75 91.05 88.10 85.7055⁄64 .8594 .7495 6 2 5⁄8 10 24808594 82.35 - - - - - - -

7⁄8 .8750 .7495 6 2 5⁄8 10 248028 85.50 0.8471 - 0.8780 121.30 103.35 97.30 94.45 91.35 88.9557⁄64 .8906 .7495 6 2 5⁄8 10 24808906 99.50 - - - - - - -29⁄32 .9062 .7495 6 2 5⁄8 10 248029 99.50 0.8781 - 0.9090 135.40 117.45 111.35 108.45 105.40 102.9559⁄64 .9219 .7495 8 2 5⁄8 10 24809219 99.50 - - - - - - -

15⁄16 .9375 .7495 8 2 5⁄8 10 248030 99.50 0.9091 - 0.9410 135.40 117.45 111.35 108.45 105.40 102.9561⁄64 .9531 .7495 8 2 5⁄8 10 24809531 104.25 - - - - - - -31⁄32 .9688 .7495 8 2 5⁄8 10 248031 104.25 0.9411 - 0.9720 140.20 122.20 116.10 113.25 110.20 107.7563⁄64 .9844 .8745 8 2 ¾ 10 ½ 24809844 104.25 - - - - - - -

1 1.0000 .8745 8 2 ¾ 10 ½ 248032 104.25 0.9721 - 1.0030 140.20 122.20 116.10 113.25 110.20 107.751 1⁄16 1.0625 .8745 8 2 ¾ 10 ½ 248034 107.80 1.0031 - 1.0660 142.20 124.90 119.20 116.45 113.45 111.201 1⁄8 1.1250 .8745 8 2 7⁄8 11 248036 116.75 1.0661 - 1.1280 151.15 133.90 128.10 125.40 122.45 120.101 3⁄16 1.1875 .9995 8 2 7⁄8 11 248038 127.85 1.1281 - 1.1905 162.30 145.00 139.25 136.55 133.55 131.25

1 ¼ 1.2500 .9995 8 3 11 ½ 248040 142.50 1.1906 - 1.2530 176.90 159.65 153.85 151.15 148.20 145.851 5⁄16 1.3125 .9995 8 3 11 ½ 248042 142.50 1.2531 - 1.3155 176.90 159.65 153.85 151.15 148.20 145.851 3⁄8 1.3750 .9995 8 3 ¼ 12 248044 144.60 1.3156 - 1.3780 179.00 161.75 156.00 153.30 150.25 148.001 7⁄16 1.4375 .9995 8 3 ¼ 12 248046 159.75 1.3781 - 1.4405 194.15 176.90 171.20 168.40 165.40 163.20

1 ½ 1.5000 1.2495 8 3 ½ 12 ½ 248048 191.80 1.4406 - 1.5030 226.25 209.00 203.25 200.45 197.60 195.20

TOOLDIAMETER

MAX.SHANKDIAM.

OVERALLLENGTH

NO. OF FLUTES

TYPE 2486EDP NO.

PRICE

.1855 .1805 4 ½ 4 248617 $60.40

.1870 .1805 4 ½ 4 248618 60.40

.2480 .2405 6 4 248623 60.40

.2495 .2405 6 4 248624 60.40

.3105 .2792 6 4 248630 61.55

.3120 .2792 6 4 248631 61.55

.3730 .3105 7 4 248636 63.30

.3745 .3105 7 4 248637 63.30

.4355 .3730 7 6 248642 74.35

.4370 .3730 7 6 248643 74.35

.4980 .4355 8 6 248648 80.30

.4995 .4355 8 6 248649 80.30

Cased set of above 12 reamers 248600 760.65

TOOLDIAMETER

MAX.SHANKDIAM.

OVERALLLENGTH

NO. OF FLUTES

TYPE 2488EDP NO.

PRICE

.1865 .1805 4 ½ 4 248818 $60.40

.1885 .1805 4 ½ 4 248819 60.40

.2490 .2405 6 4 248824 60.40

.2510 .2405 6 4 248825 60.40

.3115 .2792 6 4 248831 61.55

.3135 .2792 6 4 248832 61.55

.3740 .3105 7 4 248837 63.30

.3760 .3105 7 4 248838 63.30

.4365 .3730 7 6 248843 74.35

.4385 .3730 7 6 248844 74.35

.4990 .4355 8 6 248849 80.30

.5010 .4355 8 6 248850 80.30

Cased set of above 12 reamers 248800 760.65

CARBIDE TIPPED FOR REAMING STEEL

DOWEL PIN SIZE REAMERS

CARBIDE TIPPED FOR REAMING STEEL

OVER & UNDER SIZE REAMERS


CONTINUED FROM PREVIOUS PAGE


USE:These precision ground carbide tipped reamers accurately Qnish dowel pin holes in steels, tough steel alloys and cast steels and result in properly Qtted dowel pins subjected to shearing strain - assuring accurate alignment. Should be used in pairs of .0005” and .0020” under fraction size — Note special minus .0002” tolerance.


USE:These precision ground carbide tipped reamers are very convenient for Qnishing accurate holes in steel, tough steel alloys and cast steels.


TOOLDIAMETER MAX.

SHANKDIAMETER

NO.OF

FLUTES

LENGTHTYPE 2458

EDP NO.PRICE

SPECIALDECIMAL

SIZE RANGE


FRAC. DEC.FLUTE & CARBIDE


3⁄16 .1875 .1805 4 1 1⁄8 4 ½ 245806 $48.35 0.1770 - 0.2040 $80.65 $64.50 $59.05 $56.50 $53.75 $51.507⁄32 .2188 .2075 4 1 ¼ 5 245807 48.35 0.2041 - 0.2210 80.65 64.50 59.05 56.50 53.75 51.5015⁄64 .2344 .2265 4 1 ½ 6 24582344 48.35 0.2211 - 0.2380 80.65 64.50 59.05 56.50 53.75 51.50¼ .2500 .2405 4 1 ½ 6 245808 48.35 0.2381 - 0.2530 80.65 64.50 59.05 56.50 53.75 51.50

9⁄32 .2812 .2485 4 1 ½ 6 245809 49.40 0.2531 - 0.2840 81.65 65.55 60.10 57.60 54.75 52.655⁄16 .3125 .2792 4 1 ½ 6 245810 49.40 0.2841 - 0.3150 81.65 65.55 60.10 57.60 54.75 52.6511⁄32 .3438 .2792 4 1 ½ 6 245811 51.20 0.3151 - 0.3470 83.55 67.25 61.90 59.30 56.60 54.403⁄8 .3750 .3105 4 1 ¾ 7 245812 51.20 0.3471 - 0.3780 83.55 67.25 61.90 59.30 56.60 54.40

13⁄32 .4062 .3105 4 1 ¾ 7 245813 53.75 0.3781 - 0.4090 85.95 69.85 64.45 61.85 59.05 56.857⁄16 .4375 .3730 6 1 ¾ 7 245814 58.15 0.4091 - 0.4410 90.40 74.30 68.85 66.25 63.50 61.2515⁄32 .4688 .3730 6 1 ¾ 7 245815 62.80 0.4411 - 0.4720 95.20 78.90 73.55 70.95 68.15 66.00½ .5000 .4355 6 2 8 245816 67.25 0.4721 - 0.5030 101.95 84.60 78.80 76.00 73.05 70.75

17⁄32 .5312 .4355 6 2 8 245817 69.20 0.5031 - 0.5340 103.85 86.50 80.65 77.90 74.95 72.609⁄16 .5625 .4355 6 2 8 245818 69.20 0.5341 - 0.5660 103.85 86.50 80.65 77.90 74.95 72.6019⁄32 .5938 .4355 6 2 8 245819 71.85 0.5661 - 0.5970 106.50 89.15 83.30 80.55 77.60 75.305⁄8 .6250 .5615 6 2 ¼ 9 245820 71.85 0.5971 - 0.6280 106.50 89.15 83.30 80.55 77.60 75.30

21⁄32 .6562 .5615 6 2 ¼ 9 245821 73.20 0.6281 - 0.6590 107.85 90.45 84.65 81.90 78.90 76.6011⁄16 .6875 .5615 6 2 ¼ 9 245822 73.20 0.6591 - 0.6910 107.85 90.45 84.65 81.90 78.90 76.6023⁄32 .7188 .5615 6 2 ¼ 9 245823 76.55 0.6911 - 0.7220 111.15 93.75 88.05 85.30 82.25 79.90¾ .7500 .6245 6 2 ½ 9 ½ 245824 76.55 0.7221 - 0.7530 111.15 93.75 88.05 85.30 82.25 79.90

25⁄32 .7812 .6245 6 2 ½ 9 ½ 245825 79.20 0.7531 - 0.7840 113.75 96.40 90.60 87.80 84.85 82.5013⁄16 .8125 .6245 6 2 ½ 9 ½ 245826 79.20 0.7841 - 0.8160 113.75 96.40 90.60 87.80 84.85 82.5027⁄32 .8438 .6245 6 2 ½ 9 ½ 245827 82.35 0.8161 - 0.8470 116.90 99.55 93.75 91.05 88.10 85.707⁄8 .8750 .7495 6 2 5⁄8 10 245828 85.50 0.8471 - 0.8780 121.30 103.35 97.30 94.45 91.35 88.95

29⁄32 .9062 .7495 6 2 5⁄8 10 245829 99.50 0.8781 - 0.9090 135.40 117.45 111.35 108.45 105.40 102.9515⁄16 .9375 .7495 8 2 5⁄8 10 245830 99.50 0.9091 - 0.9410 135.40 117.45 111.35 108.45 105.40 102.9531⁄32 .9688 .7495 8 2 5⁄8 10 245831 104.25 0.9411 - 0.9720 140.20 122.20 116.10 113.25 110.20 107.75

1 1.0000 .8745 8 2 ¾ 10 ½ 245832 104.25 0.9721 - 1.0030 140.20 122.20 116.10 113.25 110.20 107.75

1 1⁄16 1.0625 .8745 8 2 ¾ 10 ½ 245834 107.80 1.0031 - 1.0660 142.20 124.90 119.20 116.45 113.45 111.201 1⁄8 1.1250 .8745 8 2 7⁄8 11 245836 116.75 1.0661 - 1.1280 151.15 133.90 128.10 125.40 122.45 120.101 3⁄16 1.1875 .9995 8 2 7⁄8 11 245838 122.05 1.1281 - 1.1905 156.50 139.25 133.45 130.80 127.80 125.451 ¼ 1.2500 .9995 8 3 11 ½ 245840 131.85 1.1906 - 1.2530 166.30 149.15 143.30 140.60 137.65 135.30

1 5⁄16 1.3125 .9995 8 3 11 ½ 245842 135.55 1.2531 - 1.3155 170.00 152.80 146.95 144.25 141.30 138.951 3⁄8 1.3750 .9995 8 3 ¼ 12 245844 144.60 1.3156 - 1.3780 179.00 161.75 156.00 153.30 150.25 148.001 7⁄16 1.4375 .9995 8 3 ¼ 12 245846 156.60 1.3781 - 1.4405 191.00 173.75 167.95 165.20 162.30 159.951 ½ 1.5000 1.2495 8 3 ½ 12 ½ 245848 161.10 1.4406 - 1.5030 195.55 178.30 172.55 169.80 166.90 164.55

1 9⁄16 1.5625 1.2495 8 3 ½ 12 ½ 245850 253.10 1.5031 - 1.5660 287.60 270.35 264.60 261.80 258.85 256.501 5⁄8 1.6250 1.2495 8 3 ½ 13 245852 261.75 1.5661 - 1.6280 296.25 279.05 273.25 270.50 267.50 265.201 11⁄16 1.6875 1.2495 8 3 ½ 13 245854 287.40 1.6281 - 1.6910 321.90 304.70 298.90 296.15 293.15 290.851 ¾ 1.7500 1.2495 10 3 ½ 13 ½ 245856 287.40 1.6911 - 1.7530 321.90 304.70 298.90 296.15 293.15 290.85

1 13⁄16 1.8125 1.4995 10 3 ½ 13 ½ 245858 294.10 1.7531 - 1.8160 328.60 311.40 305.60 302.85 299.80 297.551 7⁄8 1.8750 1.4995 10 3 ½ 14 245860 308.45 1.8161 - 1.8780 342.95 325.75 319.90 317.20 314.20 311.901 15⁄16 1.9375 1.4995 10 3 ½ 14 245862 327.00 1.8781 - 1.9410 361.50 344.25 338.45 335.75 332.75 330.452 2.0000 1.4995 12 3 ½ 14 245864 326.55 1.9411 - 2.0030 361.05 343.80 338.05 335.30 332.30 330.00

2 1⁄8 2.1250 1.4995 12 3 ½ 14 ½ 245868 606.70 2.0031 - 2.1280 641.20 623.95 618.15 615.45 612.40 610.152 ¼ 2.2500 1.7495 12 3 ½ 14 ½ 245872 651.60 2.1281 - 2.2530 686.10 668.85 663.10 660.35 657.35 655.102 3⁄8 2.3750 1.7495 12 3 ½ 15 245876 674.25 2.2531 - 2.3780 708.75 691.50 685.70 683.00 680.00 677.702 ½ 2.5000 1.7495 12 3 ½ 15 245880 674.25 2.3781 - 2.5030 708.75 691.50 685.70 683.00 680.00 677.70

NAS 897 CHUCKING REAMERS CARBIDE TIPPED - STRAIGHT FLUTE LONG CARBIDE - STRAIGHT SHANK

TYPE 2458 - NAS 897 REAMERNational Aerospace Standards.Type “C” with >ute long carbide tips.Carbide tips brazed to hardened alloy steel bodies.Precision ground cutting edges.Straight shank.



Closer tolerance.For +.0002” add $1.00 per tool.For +.0001” add $3.00 per tool.

MADE IN USA


TOOLDIAMETER

RANGE

MAX. SHANK

DIAMETER

NO.OF

FLUTES

LENGTHTYPE 2458EL

EDP NO.


FLUTE OVERALL RANGE 1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14**

0.1121-0.1280 .1099 4 1 ½ 2 9⁄32 - 6 245804EL $232.60 $203.70 $194.00 $189.40 $184.50 $180.550.1281-0.1435 .1255 4 1 ½ 2 17⁄32 - 6 ½ 2458045EL 233.40 204.55 194.85 190.20 185.25 181.400.1436-0.1590 .1411 4 1 ½ 2 17⁄32 - 7 245805EL 237.25 208.35 198.65 194.05 189.10 185.200.1591-0.1750 .1567 4 1 ½ 2 25⁄32 - 8 2458055EL 241.75 212.80 203.20 198.55 193.60 189.70

0.1751-0.1910 .1724 4 1 ½ 4 17⁄32 - 9 245806EL 248.15 219.25 209.55 205.00 200.00 196.100.1911-0.2210 .1880 4 1 ½ 5 1⁄32 - 10 245807EL 256.50 227.70 218.00 213.40 208.40 204.550.2211-0.2530 .2193 4 1 ½ 6 1⁄32 - 12 245808EL 273.10 244.15 234.60 229.95 225.00 221.100.2531-0.2840 .2505 4 1 ½ 6 1⁄32 - 12 245809EL 287.30 258.45 248.80 244.10 239.20 235.25

0.2841-0.3150 .2792 4 1 ½ 6 1⁄32 - 12 245810EL 203.90 175.00 165.35 160.70 155.75 151.900.3151-0.3470 .2792 4 1 ½ 6 1⁄32 - 12 245811EL 203.90 175.00 165.35 160.70 155.75 151.900.3471-0.3780 .3105 4 1 ¾ 7 1⁄32 - 14 245812EL 210.55 181.70 172.05 167.35 162.45 158.500.3781-0.4090 .3105 4 1 ¾ 7 1⁄32 - 14 245813EL 210.55 181.70 172.05 167.35 162.45 158.50

0.4091-0.4410 .3730 6 1 ¾ 7 1⁄32 - 14 245814EL 217.25 188.35 178.70 174.05 169.10 165.200.4411-0.4720 .3730 6 1 ¾ 7 1⁄32 - 14 245815EL 217.25 188.35 178.70 174.05 169.10 165.200.4721-0.5030 .4355 6 2 8 1⁄32 - 16 245816EL 221.75 192.80 183.15 178.55 173.65 169.700.5031-0.5340 .4355 6 2 8 1⁄32 - 16 245817EL 221.75 192.80 183.15 178.55 173.65 169.70

0.5341-0.5660 .4355 6 2 8 1⁄32 - 16 245818EL 225.90 196.95 187.30 182.70 177.75 173.850.5661-0.5970 .4355 6 2 8 1⁄32 - 16 245819EL 225.90 196.95 187.30 182.70 177.75 173.850.5971-0.6280 .5615 6 2 ¼ 9 1⁄32 - 18 245820EL 230.65 201.70 192.05 187.45 182.55 178.600.6281-0.6590 .5615 6 2 ¼ 9 1⁄32 - 18 245821EL 230.65 201.70 192.05 187.45 182.55 178.60

0.6591-0.6910 .5615 6 2 ¼ 9 1⁄32 - 18 245822EL 231.30 202.40 192.70 188.10 183.15 179.250.6911-0.7220 .5615 6 2 ¼ 9 1⁄32 - 18 245823EL 231.30 202.40 192.70 188.10 183.15 179.250.7221-0.7530 .6245 6 2 ½ 9 17⁄32 - 18 245824EL 248.30 219.35 209.65 205.10 200.20 196.250.7531-0.7840 .6245 6 2 ½ 9 17⁄32 - 18 245825EL 301.30 273.75 264.50 260.20 255.45 251.75

0.7841-0.8160 .6245 6 2 ½ 9 17⁄32 - 18 245826EL 310.90 283.35 274.10 269.75 265.05 261.350.8161-0.8470 .6245 6 2 ½ 9 17⁄32 - 18 245827EL 314.50 286.95 277.70 273.35 268.65 264.950.8471-0.8780 .7495 6 2 5⁄8 10 1⁄32 - 18 245828EL 321.15 293.55 284.35 280.00 275.30 271.550.8781-0.9090 .7495 6 2 5⁄8 10 1⁄32 - 18 245829EL 334.65 307.10 297.85 293.50 288.80 285.10

0.9091-0.9410 .7495 8 2 5⁄8 10 1⁄32 - 18 245830EL 338.00 310.40 301.20 296.85 292.15 288.450.9411-0.9720 .7495 8 2 5⁄8 10 1⁄32 - 18 245831EL 341.20 313.65 304.45 300.10 295.35 291.650.9721-1.0030 .8745 8 2 ¾ 10 17⁄32 - 18 245832EL 349.15 321.60 312.40 308.05 303.30 299.60

EXTENDED LENGTH REAMERS CARBIDE TIPPED - STRAIGHT FLUTE LONG CARBIDE - STRAIGHT SHANK

TYPE 2458EL - EXTENDED LENGTH REAMERExtended length version of type 2458 found on page 60.Extended length reamers provided with controlled shank.Specify overall length when ordering (centers supplied only at maximum overall length).Precision ground cutting edges.Straight shank.

OPTIONS:See page 60

**Quantities of 15 or more: contact Rock River Tool Specials Dept.


****

****

*Solid Carbide

MADE IN USA


TOOLDIAMETER MAX.

SHANKDIAMETER

NO.OF

FLUTES

LENGTHTYPE 2408

EDP NO.PRICE

SPECIALDECIMAL

SIZE RANGE


FRAC. DEC. FLUTE CARBIDE OVERALL 1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14*

5⁄32 .1562 .1510 4 1 ½ 4 240805 $44.10 0.1560 - 0.1769 $76.45 $60.15 $54.75 $52.20 $49.40 $47.203⁄16 .1875 .1805 4 1 1⁄8 ½ 4 ½ 240806 40.45 0.1770 - 0.2040 71.90 56.15 50.90 48.35 45.65 43.507⁄32 .2188 .2075 4 1 ¼ ½ 5 240807 40.45 0.2041 - 0.2210 71.90 56.15 50.90 48.35 45.65 43.5015⁄64 .2344 .2265 4 1 ½ ½ 6 24082344 42.95 0.2211 - 0.2380 74.35 58.60 53.30 50.85 48.05 45.95

¼ .2500 .2405 4 1 ½ ½ 6 240808 40.70 0.2381 - 0.2530 72.15 56.40 51.15 48.60 45.90 43.809⁄32 .2812 .2485 4 1 ½ ½ 6 240809 41.50 0.2531 - 0.2840 73.00 57.20 52.00 49.40 46.75 44.555⁄16 .3125 .2792 4 1 ½ ½ 6 240810 41.50 0.2841 - 0.3150 73.00 57.20 52.00 49.40 46.75 44.555⁄16 .3125 .2792 6 1 ½ ½ 6 240890 45.65 0.2841 - 0.3150 77.05 61.30 56.00 53.55 50.90 48.75

11⁄32 .3438 .2792 4 1 ½ 5⁄8 6 240811 43.10 0.3151 - 0.3470 74.50 58.80 53.50 51.00 48.30 46.2011⁄32 .3438 .2792 6 1 ½ 5⁄8 6 240891 47.30 0.3151 - 0.3470 78.75 63.00 57.75 55.25 52.50 50.403⁄8 .3750 .3105 4 1 ¾ 5⁄8 7 240812 39.55 0.3471 - 0.3780 68.35 53.90 49.10 46.80 44.30 42.353⁄8 .3750 .3105 6 1 ¾ 5⁄8 7 240892 43.40 0.3471 - 0.3780 72.25 57.80 53.00 50.70 48.20 46.25

13⁄32 .4062 .3105 4 1 ¾ 5⁄8 7 240813 45.15 0.3781 - 0.4090 76.60 60.85 55.60 53.05 50.30 48.2513⁄32 .4062 .3105 6 1 ¾ 5⁄8 7 240893 48.10 0.3781 - 0.4090 79.60 63.80 58.60 56.00 53.35 51.257⁄16 .4375 .3730 6 1 ¾ 5⁄8 7 240814 48.10 0.4091 - 0.4410 79.60 63.80 58.60 56.00 53.35 51.2515⁄32 .4688 .3730 6 1 ¾ 5⁄8 7 240815 48.85 0.4411 - 0.4720 80.30 64.55 59.25 56.75 54.10 52.00

½ .5000 .4355 6 2 5⁄8 8 240816 57.75 0.4721 - 0.5030 92.40 75.00 69.20 66.50 63.50 61.1517⁄32 .5312 .4355 6 2 5⁄8 8 240817 62.85 0.5031 - 0.5340 97.45 80.10 74.35 71.55 68.65 66.259⁄16 .5625 .4355 6 2 5⁄8 8 240818 62.85 0.5341 - 0.5660 97.45 80.10 74.35 71.55 68.65 66.2519⁄32 .5938 .4355 6 2 5⁄8 8 240819 65.45 0.5661 - 0.5970 100.05 82.70 76.85 74.10 71.15 68.80

5⁄8 .6250 .5615 6 2 ¼ 5⁄8 9 240820 65.45 0.5971 - 0.6280 100.05 82.70 76.85 74.10 71.15 68.8021⁄32 .6562 .5615 6 2 ¼ 5⁄8 9 240821 66.55 0.6281 - 0.6590 101.20 83.80 77.95 75.30 72.25 69.9511⁄16 .6875 .5615 6 2 ¼ 5⁄8 9 240822 66.55 0.6591 - 0.6910 101.20 83.80 77.95 75.30 72.25 69.9523⁄32 .7188 .5615 6 2 ¼ 5⁄8 9 240823 69.70 0.6911 - 0.7220 104.30 86.90 81.15 78.35 75.40 73.05

¾ .7500 .6245 6 2 ½ ¾ 9 ½ 240824 69.70 0.7221 - 0.7530 104.30 86.90 81.15 78.35 75.40 73.0525⁄32 .7812 .6245 6 2 ½ ¾ 9 ½ 240825 71.90 0.7531 - 0.7840 106.55 89.20 83.40 80.60 77.65 75.3513⁄16 .8125 .6245 6 2 ½ ¾ 9 ½ 240826 71.90 0.7841 - 0.8160 106.55 89.20 83.40 80.60 77.65 75.3527⁄32 .8438 .6245 6 2 ½ ¾ 9 ½ 240827 74.80 0.8161 - 0.8470 109.40 92.10 86.35 83.55 80.55 78.25

7⁄8 .8750 .7495 6 2 5⁄8 ¾ 10 240828 77.65 0.8471 - 0.8780 113.55 95.55 89.50 86.70 83.65 81.2029⁄32 .9062 .7495 6 2 5⁄8 ¾ 10 240829 90.40 0.8781 - 0.9090 126.35 108.35 102.35 99.50 96.35 93.9015⁄16 .9375 .7495 8 2 5⁄8 ¾ 10 240830 90.40 0.9091 - 0.9410 126.35 108.35 102.35 99.50 96.35 93.9031⁄32 .9688 .7495 8 2 5⁄8 ¾ 10 240831 94.70 0.9411 - 0.9720 130.60 112.60 106.60 103.65 100.60 98.15

1 1.0000 .8745 8 2 ¾ ¾ 10 ½ 240832 94.70 0.9721 - 1.0030 130.60 112.60 106.60 103.65 100.60 98.151 1⁄16 1.0625 .8745 8 2 ¾ ¾ 10 ½ 240834 98.05 1.0031 - 1.0660 132.45 115.30 109.45 106.70 103.70 101.451 1⁄8 1.1250 .8745 8 2 7⁄8 7⁄8 11 240836 106.00 1.0661 - 1.1280 140.40 123.15 117.45 114.65 111.70 109.401 3⁄16 1.1875 .9995 8 2 7⁄8 7⁄8 11 240838 111.40 1.1281 - 1.1905 145.85 128.65 122.85 120.10 117.15 114.85

1 ¼ 1.2500 .9995 8 3 7⁄8 11 ½ 240840 117.75 1.1906 - 1.2530 152.20 135.00 129.15 126.45 123.50 121.151 5⁄16 1.3125 .9995 8 3 7⁄8 11 ½ 240842 123.95 1.2531 - 1.3155 158.40 141.20 135.35 132.65 129.65 127.301 3⁄8 1.3750 .9995 8 3 ¼ 7⁄8 12 240844 131.50 1.3156 - 1.3780 165.95 148.70 142.85 140.20 137.15 134.851 7⁄16 1.4375 .9995 8 3 ¼ 7⁄8 12 240846 146.55 1.3781 - 1.4405 181.05 163.70 158.00 155.30 152.25 150.00

1 ½ 1.5000 1.2495 8 3 ½ 7⁄8 12 ½ 240848 154.90 1.4406 - 1.5030 189.35 172.15 166.30 163.60 160.60 158.30

NAS 897 CHUCKING REAMERS CARBIDE TIPPED - STRAIGHT FLUTE - STRAIGHT SHANK

TYPE 2408 - NAS 897 REAMERNational Aerospace Standards.Type “C” with short carbide tip.Carbide tips brazed to hardened alloy steel bodies.Precision ground cutting edges.Straight polished >utes.Straight shank.




MADE IN USA


TOOLDIAMETER SHANK

DIAMETER

NUMBEROF

FLUTES

LENGTH TYPE 2410RIGHT

EDP NO.PRICE

TYPE 2420LEFT

EDP NO.PRICE

SPECIALDECIMAL

SIZE RANGE



3⁄16 .1875 11⁄64 4 1 1⁄8 4 ½ 241006 $47.45 242006 $47.45 0.1770 - 0.2040 $78.25 $62.80 $57.65 $55.15 $52.50 $50.457⁄32 .2188 13⁄64 4 1 ¼ 5 241007 47.45 242007 47.45 0.2041 - 0.2210 78.25 62.80 57.65 55.15 52.50 50.4515⁄64 .2344 7⁄32 4 1 ½ 6 24102344 47.45 24202344 47.45 0.2211 - 0.2380 78.25 62.80 57.65 55.15 52.50 50.45¼ .2500 15⁄64 4 1 ½ 6 241008 47.45 242008 47.45 0.2381 - 0.2530 78.25 62.80 57.65 55.15 52.50 50.45

9⁄32 .2812 15⁄64 4 1 ½ 6 241009 47.60 242009 47.60 0.2531 - 0.2840 78.35 62.90 57.75 55.30 52.65 50.555⁄16 .3125 9⁄32 4 1 ½ 6 241010 47.60 242010 47.60 0.2841 - 0.3150 78.35 62.90 57.75 55.30 52.65 50.5511⁄32 .3438 9⁄32 4 1 ½ 6 241011 52.35 242011 52.35 0.3151 - 0.3470 83.15 67.70 62.55 60.10 57.45 55.403⁄8 .3750 5⁄16 4 1 ¾ 7 241012 52.85 242012 52.85 0.3471 - 0.3780 83.60 68.20 63.00 60.65 58.00 55.90

13⁄32 .4062 5⁄16 4 1 ¾ 7 241013 55.25 242013 55.25 0.3781 - 0.4090 86.00 70.60 65.45 62.95 60.30 58.257⁄16 .4375 3⁄8 4 1 ¾ 7 241014 57.45 242014 57.45 0.4091 - 0.4410 88.20 72.80 67.65 65.20 62.55 60.4515⁄32 .4688 3⁄8 4 1 ¾ 7 241015 60.95 242015 60.95 0.4411 - 0.4720 91.75 76.35 71.20 68.70 66.10 63.95½ .5000 7⁄16 6 2 8 241016 63.30 242016 63.30 0.4721 - 0.5030 94.80 78.95 73.70 71.20 68.50 66.35

17⁄32 .5312 7⁄16 6 2 8 241017 65.20 242017 65.20 0.5031 - 0.5340 96.80 80.95 75.70 73.15 70.45 68.309⁄16 .5625 7⁄16 6 2 8 241018 65.20 242018 65.20 0.5341 - 0.5660 96.80 80.95 75.70 73.15 70.45 68.3019⁄32 .5938 7⁄16 6 2 8 241019 67.15 242019 67.15 0.5661 - 0.5970 98.70 82.90 77.60 75.05 72.35 70.205⁄8 .6250 9⁄16 6 2 ¼ 9 241020 67.15 242020 67.15 0.5971 - 0.6280 98.70 82.90 77.60 75.05 72.35 70.20

21⁄32 .6562 9⁄16 6 2 ¼ 9 241021 69.05 242021 69.05 0.6281 - 0.6590 100.70 84.85 79.55 77.00 74.25 72.2011⁄16 .6875 9⁄16 6 2 ¼ 9 241022 73.55 242022 73.55 0.6591 - 0.6910 105.10 89.25 84.00 81.45 78.75 76.6523⁄32 .7188 9⁄16 6 2 ¼ 9 241023 74.55 242023 74.55 0.6911 - 0.7220 106.10 90.30 85.00 82.50 79.75 77.65¾ .7500 5⁄8 6 2 ½ 9 ½ 241024 75.75 242024 75.75 0.7221 - 0.7530 107.30 91.50 86.20 83.65 80.95 78.80

25⁄32 .7812 5⁄8 6 2 ½ 9 ½ 241025 77.65 242025 77.65 0.7531 - 0.7840 109.30 93.45 88.15 85.60 82.90 80.7513⁄16 .8125 5⁄8 6 2 ½ 9 ½ 241026 77.65 242026 77.65 0.7841 - 0.8160 109.30 93.45 88.15 85.60 82.90 80.7527⁄32 .8438 5⁄8 6 2 ½ 9 ½ 241027 81.90 242027 81.90 0.8161 - 0.8470 113.55 97.70 92.40 89.90 87.15 85.007⁄8 .8750 ¾ 6 2 5⁄8 10 241028 85.00 242028 85.00 0.8471 - 0.8780 117.80 101.40 95.80 93.30 90.40 88.20

29⁄32 .9062 ¾ 6 2 5⁄8 10 241029 99.05 242029 99.05 0.8781 - 0.9090 131.80 115.40 109.90 107.25 104.45 102.2515⁄16 .9375 ¾ 8 2 5⁄8 10 241030 99.05 242030 99.05 0.9091 - 0.9410 131.80 115.40 109.90 107.25 104.45 102.2531⁄32 .9688 ¾ 8 2 5⁄8 10 241031 103.85 242031 103.85 0.9411 - 0.9720 136.65 120.20 114.75 112.10 109.25 107.101 1.0000 7⁄8 8 2 ¾ 10 ½ 241032 103.85 242032 103.85 0.9721 - 1.0030 136.65 120.20 114.75 112.10 109.25 107.10

1 1⁄16 1.0625 7⁄8 8 2 ¾ 10 ½ 241034 111.40 242034 111.40 1.0031 - 1.0660 144.20 127.80 122.30 119.65 116.80 114.651 1⁄8 1.1250 7⁄8 8 2 7⁄8 11 241036 114.85 242036 114.85 1.0661 - 1.1280 147.60 131.25 125.70 123.05 120.25 118.101 3⁄16 1.1875 1 8 2 7⁄8 11 241038 120.70 242038 120.70 1.1281 - 1.1905 153.45 137.05 131.55 128.90 126.10 123.901 ¼ 1.2500 1 8 3 11 ½ 241040 127.75 242040 127.75 1.1906 - 1.2530 160.50 144.05 138.60 135.95 133.15 130.95

1 5⁄16 1.3125 1 8 3 11 ½ 241042 141.30 242042 141.30 1.2531 - 1.3155 174.15 157.75 152.15 149.60 146.75 144.551 3⁄8 1.3750 1 8 3 ¼ 12 241044 154.85 242044 154.85 1.3156 - 1.3780 187.65 171.25 165.75 163.15 160.30 158.101 7⁄16 1.4375 1 ¼ 8 3 ¼ 12 241046 164.05 242046 164.05 1.3781 - 1.4405 196.85 180.40 174.90 172.35 169.50 167.251 ½ 1.5000 1 ¼ 8 3 ½ 12 ½ 241048 173.30 242048 173.30 1.4406 - 1.5030 206.05 189.65 184.20 181.50 178.75 176.55

CHUCKING REAMERS CARBIDE TIPPED - RIGHT OR LEFT SPIRAL FLUTES - STRAIGHT SHANK

TYPE 2410 - RIGHT SPIRAL FLUTES

STRAIGHT SHANK

USE:Right spiral >utes have greater chip clearing ability for use with ductile materials, highly abrasive materials or blind holes.Spiral >utes tend to bridge interruptions such as keyways, slots or intersecting holes, permitting better Qnishes.

BOTH TYPES:Straight shanks and polished spiral >utes.Carbide tips brazed to one piece hardened alloy steel bodies.Cutting diameter tolerance plus .0003” minus .0000”.

TYPE 2420 - LEFT SPIRAL FLUTES

STRAIGHT SHANK

USE:Left spiral >utes should only be used on through holes for heat treated steels, hard cast iron and other hard materials.Finishes are much better as spiral >utes tend to bridge interruptions such as keyways, slots or intersecting holes.

OPTIONS:Intermediate decimal & metric sizes (priced as indicated in extended table below).Cutting diameter reduced for small steps or pilot.Radius end or end chamfer other than 45˚.End cutting.Rose grind (twice normal back taper).Short shank or undersize shank diameter.Flat on shank or tanged shank.Semi-Qnished type reamers in stock (see page 73).Closer tolerance.For .0002” add $1.00 per tool.For .0001” add $3.00 per tool.


MADE IN USA



TOOLDIAMETER SHANK

DIAM.

NO.OF

FLUTES

LENGTHTYPE 2465

EDP NO.PRICE

SPECIALDECIMAL

SIZE RANGE


FRAC. DECIMALFLUTE &CARBIDE


5⁄16 .3125 9⁄32 4 1 6 246510 $62.15 0.2841 - 0.3150 $94.50 $78.30 $72.80 $70.35 $67.60 $65.3511⁄32 .3438 9⁄32 4 1 6 246511 62.15 0.3151 - 0.3470 94.50 78.30 72.80 70.35 67.60 65.353⁄8 .3750 5⁄16 4 1 7 246512 58.25 0.3471 - 0.3780 88.60 73.40 68.25 65.90 63.30 61.20

13⁄32 .4062 5⁄16 4 1 7 246513 61.85 0.3781 - 0.4090 92.10 76.90 71.85 69.45 66.85 64.75

7⁄16 .4375 3⁄8 4 1 7 246514 61.85 0.4091 - 0.4410 92.10 76.90 71.85 69.45 66.85 64.7515⁄32 .4688 3⁄8 4 1 7 246515 65.55 0.4411 - 0.4720 95.75 80.60 75.60 73.15 70.55 68.55½ .5000 7⁄16 6 1 8 246516 65.55 0.4721 - 0.5030 95.75 80.60 75.60 73.15 70.55 68.55

17⁄32 .5312 7⁄16 6 1 8 246517 67.15 0.5031 - 0.5340 97.50 82.30 77.20 74.80 72.20 70.15

9⁄16 .5625 7⁄16 6 1 1⁄8 8 246518 67.15 0.5341 - 0.5660 97.50 82.30 77.20 74.80 72.20 70.1519⁄32 .5938 7⁄16 6 1 1⁄8 8 246519 70.10 0.5661 - 0.5970 100.40 85.30 80.20 77.75 75.15 73.105⁄8 .6250 9⁄16 6 1 ¼ 9 246520 70.10 0.5971 - 0.6280 100.40 85.30 80.20 77.75 75.15 73.10

21⁄32 .6562 9⁄16 6 1 ¼ 9 246521 76.70 0.6281 - 0.6590 106.95 91.75 86.70 84.30 81.65 79.65

11⁄16 .6875 9⁄16 6 1 ¼ 9 246522 76.70 0.6591 - 0.6910 106.95 91.75 86.70 84.30 81.65 79.6523⁄32 .7188 9⁄16 6 1 ¼ 9 246523 79.50 0.6911 - 0.7220 109.85 94.60 89.50 87.15 84.55 82.50¾ .7500 5⁄8 6 1 3⁄8 9 ½ 246524 79.50 0.7221 - 0.7530 109.85 94.60 89.50 87.15 84.55 82.50

25⁄32 .7812 5⁄8 6 1 3⁄8 9 ½ 246525 85.70 0.7531 - 0.7840 116.00 100.85 95.70 93.35 90.75 88.70

13⁄16 .8125 5⁄8 6 1 3⁄8 9 ½ 246526 85.70 0.7841 - 0.8160 116.00 100.85 95.70 93.35 90.75 88.7027⁄32 .8438 5⁄8 6 1 3⁄8 9 ½ 246527 89.10 0.8161 - 0.8470 119.30 104.20 99.10 96.65 94.15 92.057⁄8 .8750 ¾ 6 1 ½ 10 246528 92.45 0.8471 - 0.8780 123.80 108.10 102.80 100.35 97.65 95.50

29⁄32 .9062 ¾ 6 1 ½ 10 246529 98.40 0.8781 - 0.9090 129.85 114.05 108.85 106.35 103.60 101.50

15⁄16 .9375 ¾ 8 1 ½ 10 246530 98.40 0.9091 - 0.9410 129.85 114.05 108.85 106.35 103.60 101.5031⁄32 .9688 ¾ 8 1 ½ 10 246531 102.25 0.9411 - 0.9720 133.60 117.90 112.60 110.15 107.40 105.30

1 1.0000 7⁄8 8 1 5⁄8 10 ½ 246532 102.25 0.9721 - 1.0030 133.60 117.90 112.60 110.15 107.40 105.301 1⁄32 1.0312 7⁄8 8 1 5⁄8 10 ½ 246533 112.05 - - - - - - -

1 1⁄16 1.0625 7⁄8 8 1 5⁄8 10 ½ 246534 112.05 1.0031 - 1.0660 143.45 127.75 122.45 119.95 117.20 115.101 3⁄32 1.0938 7⁄8 8 1 ¾ 11 246535 112.05 - - - - - - -1 1⁄8 1.1250 7⁄8 8 1 ¾ 11 246536 112.05 1.0661 - 1.1280 143.45 127.75 122.45 119.95 117.20 115.101 3⁄16 1.1875 1 8 1 ¾ 11 246538 122.25 1.1281 - 1.1905 153.70 137.90 132.65 130.15 127.40 125.40

1 ¼ 1.2500 1 8 1 7⁄8 11 ½ 246540 122.25 1.1906 - 1.2530 153.70 137.90 132.65 130.15 127.40 125.401 5⁄16 1.3125 1 8 1 7⁄8 11 ½ 246542 135.50 1.2531 - 1.3155 167.00 151.25 146.00 143.45 140.75 138.701 3⁄8 1.3750 1 8 2 12 246544 141.95 1.3156 - 1.3780 173.35 157.60 152.30 149.90 147.10 145.001 7⁄16 1.4375 1 ¼ 8 2 12 246546 167.75 1.3781 - 1.4405 201.25 184.45 178.80 176.10 173.25 171.00

1 ½ 1.5000 1 ¼ 8 2 1⁄8 12 ½ 246548 172.60 1.4406 - 1.5030 206.15 189.30 183.75 181.10 178.20 175.901 9⁄16 1.5625 1 ¼ 8 2 1⁄8 12 ½ 246550 226.70 1.5031 - 1.5660 260.20 243.45 237.75 235.05 232.20 229.951 5⁄8 1.6250 1 ¼ 8 2 ¼ 13 246552 226.70 1.5661 - 1.6280 260.20 243.45 237.75 235.05 232.20 229.951 11⁄16 1.6875 1 ¼ 8 2 ¼ 13 246554 251.05 1.6281 - 1.6910 284.60 267.80 262.20 259.50 256.65 254.30

1 ¾ 1.7500 1 ¼ 10 2 3⁄8 13 ½ 246556 251.05 1.6911 - 1.7530 284.60 267.80 262.20 259.50 256.65 254.301 13⁄16 1.8125 1 ½ 10 2 3⁄8 13 ½ 246558 297.30 1.7531 - 1.8160 330.75 314.00 308.40 305.70 302.85 300.551 7⁄8 1.8750 1 ½ 10 2 ½ 14 246560 297.30 1.8161 - 1.8780 330.75 314.00 308.40 305.70 302.85 300.551 15⁄16 1.9375 1 ½ 10 2 ½ 14 246562 324.80 1.8781 - 1.9410 358.30 341.55 335.90 333.15 330.35 328.05

2 2.0000 1 ½ 12 2 ½ 14 246564 324.80 1.9411 - 2.0030 358.30 341.55 335.90 333.15 330.35 328.052 1⁄8 2.1250 1 ½ 12 2 ¾ 14 ½ 246568 527.55 2.0031 - 2.1280 561.10 544.30 538.70 536.05 533.15 530.852 ¼ 2.2500 1 ¾ 12 2 ¾ 14 ½ 246572 566.60 2.1281 - 2.2530 600.05 583.30 577.70 575.00 572.15 569.852 3⁄8 2.3750 1 ¾ 12 3 15 246576 586.35 2.2531 - 2.3780 619.90 603.10 597.45 594.75 591.90 589.60

2 ½ 2.5000 1 ¾ 12 3 15 246580 586.35 2.3781 - 2.5030 619.90 603.10 597.45 594.75 591.90 589.60

EXPANSION CHUCKING REAMERS CARBIDE TIPPED - STRAIGHT FLUTE LONG CARBIDE AND STRAIGHT SHANK

TYPE 2465 - FINISHED FRACTIONAL SIZESExpansion screw permits expansion of cutting diameter for re-grinding after wear without reinserting carbide.Straight shank and straight polished >utes.Flute long carbide tips brazed to one piece alloy steel bodies.Cutting diameter tolerance plus .0003” minus .0000”.Guaranteed minimum expansion - see pg. 66.

OPTIONS: See page 66.

USE:Expansion reamers are recommended for reaming abrasivematerials and as the diameter wears down, the reamers can beexpanded many times by tightening the end screwand regrinding it to original size. Because this procedure canbe repeated several times, the expansion reamer is a veryeconomical tool. Expansion reamers should not be expandedto use at diameters larger than listed diameters nor be consideredas adjustable for use in producing holes of several sizes.The expansion screw should never be loosened.

MADE IN USA


TOOLDIAMETER

TYPE2465

METRICEDP NO.

METRICPRICE


SIZE RANGE


SHANKDIAM.

NO. OFFLUTES

LENGTH


FLUTE & CARBIDE

OVERALL

7.5 .2953 2465075 $72.80 9⁄32 4 1 6 7.215 -8.001 $97.20 $81.05 $75.65 $73.05 $70.35 $68.05 $64.908.0 .3150 2465080 72.80 9⁄32 4 1 6 - - - - - - - -8.5 .3346 2465085 72.80 9⁄32 4 1 6 8.002 -8.814 97.20 81.05 75.65 73.05 70.35 68.05 64.909.0 .3543 2465090 68.25 5⁄16 4 1 7 8.815 -9.601 91.15 75.95 70.90 68.50 65.90 63.80 60.90

9.5 .3740 2465095 68.25 5⁄16 4 1 7 - - - - - - - -10.0 .3937 2465100 71.85 5⁄16 4 1 7 9.602 -10.389 94.60 79.50 74.45 71.95 69.45 67.25 64.4510.5 .4134 2465105 71.85 3⁄8 4 1 7 10.390 -11.201 94.60 79.50 74.45 71.95 69.45 67.25 64.4511.0 .4331 2465110 71.85 3⁄8 4 1 7 - - - - - - - -

11.5 .4528 2465115 75.60 3⁄8 4 1 7 11.202 -11.989 98.30 83.25 78.10 75.70 73.15 71.00 68.1012.0 .4724 2465120 75.60 7⁄16 6 1 8 11.990 -12.776 98.30 83.25 78.10 75.70 73.15 71.00 68.1012.5 .4921 2465125 75.60 7⁄16 6 1 8 - - - - - - - -13.0 .5118 2465130 77.20 7⁄16 6 1 8 12.777 -13.564 100.05 84.90 79.80 77.40 74.80 72.70 69.80

13.5 .5315 2465135 77.20 7⁄16 6 1 8 - - - - - - - -14.0 .5512 2465140 77.20 7⁄16 6 1 1⁄8 8 13.565 -14.376 100.05 84.90 79.80 77.40 74.80 72.70 69.8014.5 .5709 2465145 80.20 7⁄16 6 1 1⁄8 8 14.377 -15.164 102.95 87.80 82.75 80.30 77.75 75.65 72.7015.0 .5906 2465150 80.20 7⁄16 6 1 1⁄8 8 - - - - - - - -

15.5 .6102 2465155 80.20 9⁄16 6 1 ¼ 9 15.165 -15.951 102.95 87.80 82.75 80.30 77.75 75.65 72.7016.0 .6299 2465160 86.70 9⁄16 6 1 ¼ 9 15.952 -16.739 109.45 94.40 89.30 86.80 84.30 82.20 79.3016.5 .6496 2465165 86.70 9⁄16 6 1 ¼ 9 - - - - - - - -17.0 .6693 2465170 86.70 9⁄16 6 1 ¼ 9 16.740 -17.551 109.45 94.40 89.30 86.80 84.30 82.20 79.30

17.5 .6890 2465175 86.70 9⁄16 6 1 ¼ 9 - - - - - - - -18.0 .7087 2465180 89.50 9⁄16 6 1 ¼ 9 17.552 -18.339 112.35 97.20 92.15 89.70 87.15 85.05 82.1518.5 .7283 2465185 89.50 5⁄8 6 1 3⁄8 9 ½ 18.340 -19.126 112.35 97.20 92.15 89.70 87.15 85.05 82.1519.0 .7480 2465190 89.50 5⁄8 6 1 3⁄8 9 ½ - - - - - - - -

19.5 .7677 2465195 95.70 5⁄8 6 1 3⁄8 9 ½ 19.127 -19.914 118.60 103.45 98.30 95.80 93.35 91.25 88.3020.0 .7874 2465200 95.70 5⁄8 6 1 3⁄8 9 ½ 19.915 -20.726 118.60 103.45 98.30 95.80 93.35 91.25 88.3020.5 .8071 2465205 95.70 5⁄8 6 1 3⁄8 9 ½ - - - - - - - -21.0 .8268 2465210 99.10 5⁄8 6 1 3⁄8 9 ½ 20.727 -21.514 121.90 106.80 101.65 99.20 96.65 94.55 91.65

21.5 .8465 2465215 99.10 5⁄8 6 1 3⁄8 9 ½ - - - - - - - -22.0 .8661 2465220 99.10 ¾ 6 1 ½ 10 21.515 -22.301 121.90 106.80 101.65 99.20 96.65 94.55 91.6522.5 .8858 2465225 108.85 ¾ 6 1 ½ 10 22.302 -23.089 132.45 116.80 111.50 108.95 106.35 104.15 101.1023.0 .9055 2465230 108.85 ¾ 6 1 ½ 10 - - - - - - - -

23.5 .9252 2465235 108.85 ¾ 8 1 ½ 10 23.090 -23.901 132.45 116.80 111.50 108.95 106.35 104.15 101.1024.0 .9449 2465240 112.60 ¾ 8 1 ½ 10 23.902 -24.689 136.25 120.60 115.35 112.75 110.15 107.90 104.9024.5 .9646 2465245 112.60 ¾ 8 1 ½ 10 - - - - - - - -25.0 .9843 2465250 112.60 7⁄8 8 1 5⁄8 10 ½ 24.690 -25.476 136.25 120.60 115.35 112.75 110.15 107.90 104.90

25.5 1.0039 2465255 122.45 7⁄8 8 1 5⁄8 10 ½ 25.477 -27.076 146.10 130.40 125.10 122.55 119.95 117.75 114.7026.0 1.0236 2465260 122.45 7⁄8 8 1 5⁄8 10 ½ - - - - - - - -27.0 1.0630 2465270 122.45 7⁄8 8 1 5⁄8 10 ½ - - - - - - - -28.0 1.1024 2465280 122.45 7⁄8 8 1 ¾ 11 27.077 -28.651 146.10 130.40 125.10 122.55 119.95 117.75 114.70

29.0 1.1417 2465290 132.65 1 8 1 ¾ 11 28.652 -30.239 156.30 140.60 135.35 132.75 130.15 128.00 124.9030.0 1.1811 2465300 132.65 1 8 1 ¾ 11 - - - - - - - -31.0 1.2205 2465310 132.65 1 8 1 7⁄8 11 ½ 30.240 -31.826 156.30 140.60 135.35 132.75 130.15 128.00 124.9032.0 1.2598 2465320 146.00 1 8 1 7⁄8 11 ½ 31.827 -33.414 169.60 153.90 148.70 146.10 143.45 141.30 138.30

33.0 1.2992 2465330 146.00 1 8 1 7⁄8 11 ½ - - - - - - - -34.0 1.3386 2465340 152.30 1 8 2 12 33.415 -35.001 175.95 160.30 155.00 152.50 149.90 147.65 144.6035.0 1.3780 2465350 152.30 1 8 2 12 - - - - - - - -36.0 1.4173 2465360 178.80 1 ¼ 8 2 12 35.002 -36.589 204.00 187.30 181.70 178.95 176.10 173.80 170.60

37.0 1.4567 2465370 183.75 1 ¼ 8 2 1⁄8 12 ½ 36.590 -38.176 209.00 192.25 186.65 183.85 181.10 178.75 175.5538.0 1.4961 2465380 183.75 1 ¼ 8 2 1⁄8 12 ½ - - - - - - - -39.0 1.5354 2465390 237.75 1 ¼ 8 2 1⁄8 12 ½ 38.177 -39.776 263.00 246.25 240.60 237.90 235.05 232.70 229.5540.0 1.5748 2465400 237.75 1 ¼ 8 2 ¼ 13 39.777 -41.351 263.00 246.25 240.60 237.90 235.05 232.70 229.55

41.0 1.6142 2465410 237.75 1 ¼ 8 2 ¼ 13 - - - - - - - -42.0 1.6535 2465420 262.20 1 ¼ 8 2 ¼ 13 41.352 -42.951 287.35 270.65 265.05 262.35 259.50 257.15 253.9043.0 1.6929 2465430 262.20 1 ¼ 10 2 3⁄8 13 ½ 42.952 -44.526 287.35 270.65 265.05 262.35 259.50 257.15 253.9044.0 1.7323 2465440 262.20 1 ¼ 10 2 3⁄8 13 ½ - - - - - - - -

EXPANSION CHUCKING REAMERS CARBIDE TIPPED - STRAIGHT FLUTE LONG CARBIDE & STRAIGHT SHANK


TYPE 2465 - METRIC

ModiQed tool diameters are available up to 63mm - contact us for price.

MADE IN USA


TOOL DIAMETER GUARANTEED MINIMUM EXPANSION

5⁄16” - 15⁄32” .006”

½” - 31⁄32” .010”

1” - 1 ½” .013”

1 9⁄16” - 2 ½” .015”

TOOLDIAMETER MORSE

TAPER

NO.OF

FLUTES

LENGTHTYPE 2467

EDP NO.PRICE

SPECIALDECIMAL

SIZE RANGE




5⁄16 .3125 1 4 1 6 246710 $70.00 0.2841 - 0.3150 $102.35 $86.10 $80.75 $78.10 $75.40 $73.2011⁄32 .3438 1 4 1 6 246711 70.00 0.3151 - 0.3470 102.35 86.10 80.75 78.10 75.40 73.203⁄8 .3750 1 4 1 7 246712 65.65 0.3471 - 0.3780 95.95 80.75 75.70 73.30 70.70 68.65

13⁄32 .4062 1 4 1 7 246713 67.70 0.3781 - 0.4090 97.95 82.75 77.70 75.30 72.65 70.60

7⁄16 .4375 1 4 1 7 246714 67.70 0.4091 - 0.4410 97.95 82.75 77.70 75.30 72.65 70.6015⁄32 .4688 1 4 1 7 246715 70.95 0.4411 - 0.4720 101.30 86.10 81.00 78.60 75.95 73.95½ .5000 1 6 1 8 246716 70.95 0.4721 - 0.5030 101.30 86.10 81.00 78.60 75.95 73.95

17⁄32 .5312 1 6 1 8 246717 73.15 0.5031 - 0.5340 103.45 88.25 83.20 80.75 78.10 76.05

9⁄16 .5625 1 6 1 1⁄8 8 246718 73.15 0.5341 - 0.5660 103.45 88.25 83.20 80.75 78.10 76.0519⁄32 .5938 1 6 1 1⁄8 8 246719 76.05 0.5661 - 0.5970 106.40 91.25 86.20 83.75 81.20 79.105⁄8 .6250 2 6 1 ¼ 9 246720 76.05 0.5971 - 0.6280 106.40 91.25 86.20 83.75 81.20 79.10

21⁄32 .6562 2 6 1 ¼ 9 246721 85.65 0.6281 - 0.6590 115.95 100.70 95.65 93.30 90.65 88.65

11⁄16 .6875 2 6 1 ¼ 9 246722 85.65 0.6591 - 0.6910 115.95 100.70 95.65 93.30 90.65 88.6523⁄32 .7188 2 6 1 ¼ 9 246723 85.85 0.6911 - 0.7220 116.20 101.05 95.95 93.55 90.90 88.90¾ .7500 2 6 1 3⁄8 9 ½ 246724 85.85 0.7221 - 0.7530 116.20 101.05 95.95 93.55 90.90 88.90

25⁄32 .7812 2 6 1 3⁄8 9 ½ 246725 92.20 0.7531 - 0.7840 122.55 107.30 102.30 99.90 97.20 95.25

13⁄16 .8125 2 6 1 3⁄8 9 ½ 246726 92.20 0.7841 - 0.8160 122.55 107.30 102.30 99.90 97.20 95.2527⁄32 .8438 2 6 1 3⁄8 9 ½ 246727 96.10 0.8161 - 0.8470 126.40 111.20 106.10 103.65 101.10 99.057⁄8 .8750 2 6 1 ½ 10 246728 99.75 0.8471 - 0.8780 131.10 115.45 110.15 107.65 104.90 102.75

29⁄32 .9062 2 6 1 ½ 10 246729 105.45 0.8781 - 0.9090 136.90 121.15 115.85 113.35 110.65 108.55

15⁄16 .9375 3 8 1 ½ 10 246730 105.45 0.9091 - 0.9410 136.90 121.15 115.85 113.35 110.65 108.5531⁄32 .9688 3 8 1 ½ 10 246731 109.30 0.9411 - 0.9720 140.65 124.90 119.65 117.15 114.50 112.30

1 1.0000 3 8 1 5⁄8 10 ½ 246732 109.30 0.9721 - 1.0030 140.65 124.90 119.65 117.15 114.50 112.301 1⁄32 1.0312 3 8 1 5⁄8 10 ½ 246733 119.55 - - - - - - -

1 1⁄16 1.0625 3 8 1 5⁄8 10 ½ 246734 119.55 1.0031 - 1.0660 151.10 135.30 130.00 127.50 124.80 122.651 3⁄32 1.0938 3 8 1 ¾ 11 246735 119.55 - - - - - - -1 1⁄8 1.1250 3 8 1 ¾ 11 246736 119.55 1.0661 - 1.1280 151.10 135.30 130.00 127.50 124.80 122.651 3⁄16 1.1875 3 8 1 ¾ 11 246738 134.50 1.1281 - 1.1905 165.90 150.15 144.90 142.40 139.70 137.60

1 ¼ 1.2500 4 8 1 7⁄8 11 ½ 246740 136.30 1.1906 - 1.2530 167.75 152.00 146.75 144.25 141.50 139.401 5⁄16 1.3125 4 8 1 7⁄8 11 ½ 246742 149.00 1.2531 - 1.3155 180.40 164.65 159.35 156.90 154.25 152.051 3⁄8 1.3750 4 8 2 12 246744 163.25 1.3156 - 1.3780 194.60 178.90 173.65 171.10 168.40 166.251 7⁄16 1.4375 4 8 2 12 246746 183.20 1.3781 - 1.4405 216.70 199.95 194.30 191.60 188.75 186.50

1 ½ 1.5000 4 8 2 1⁄8 12 ½ 246748 189.70 1.4406 - 1.5030 223.30 206.40 200.75 198.15 195.25 192.951 9⁄16 1.5625 4 8 2 1⁄8 12 ½ 246750 260.65 1.5031 - 1.5660 294.20 277.40 271.80 269.15 266.20 263.951 5⁄8 1.6250 4 8 2 ¼ 13 246752 260.65 1.5661 - 1.6280 294.20 277.40 271.80 269.15 266.20 263.951 11⁄16 1.6875 4 8 2 ¼ 13 246754 288.70 1.6281 - 1.6910 322.25 305.45 299.80 297.10 294.25 292.00

1 ¾ 1.7500 4 10 2 3⁄8 13 ½ 246756 288.70 1.6911 - 1.7530 322.25 305.45 299.80 297.10 294.25 292.001 13⁄16 1.8125 4 10 2 3⁄8 13 ½ 246758 341.80 1.7531 - 1.8160 375.35 358.60 353.00 350.30 347.35 345.151 7⁄8 1.8750 4 10 2 ½ 14 246760 341.80 1.8161 - 1.8780 375.35 358.60 353.00 350.30 347.35 345.151 15⁄16 1.9375 4 10 2 ½ 14 246762 373.55 1.8781 - 1.9410 407.05 390.25 384.60 381.95 379.05 376.90

2 2.0000 4 12 2 ½ 14 246764 373.55 1.9411 - 2.0030 407.05 390.25 384.60 381.95 379.05 376.902 1⁄8 2.1250 5 12 2 ¾ 14 ½ 246768 559.25 2.0031 - 2.1280 592.80 576.00 570.35 567.70 564.85 562.552 ¼ 2.2500 5 12 2 ¾ 14 ½ 246772 600.60 2.1281 - 2.2530 634.15 617.30 611.75 609.00 606.15 603.952 3⁄8 2.3750 5 12 3 15 246776 621.50 2.2531 - 2.3780 654.95 638.25 632.55 629.95 627.05 624.80

2 ½ 2.5000 5 12 3 15 246780 621.50 2.3781 - 2.5030 654.95 638.25 632.55 629.95 627.05 624.80

EXPANSION CHUCKING REAMERS CARBIDE TIPPED - STRAIGHT FLUTE LONG CARBIDE AND TAPER SHANK

TYPE 2467 - FINISHED FRACTIONAL SIZESExpansion screw permits expansion of cutting diameter for regrinding after wear without reinserting carbide.Taper shank and straight polished >utes.Flute long carbide tips brazed to one piece alloy steel bodies.Cutting diameter tolerance plus .0003” minus .0000”.

OPTIONS:Intermediate decimal and metric sizes (priced as indicated inextended table below).Cutting diameter reduced for small steps or pilot.Radius end or end chamfer other than 45˚.End cutting.Rose grind (twice normal back taper).Type 2465 semi-Qnished reamers in stock. (see pg. 73).Closer tolerance.For +.0002” add $1.00 per tool.For +.0001” add $3.00 per tool.

USE - See page 64.


MADE IN USA


ModiQed tool diameters are available up to 63mm - contact us for price.

TOOLDIAMETER

TYPE2467

METRICEDP NO.

METRICPRICE


SIZE RANGE


MORSETAPER

NO. OFFLUTES

LENGTH


FLUTE & CARBIDE

OVERALL

7.5 .2953 2467075 $80.75 1 4 1 6 7.215 -8.001 $105.05 $88.95 $83.55 $80.90 $78.10 $75.90 $72.758.0 .3150 2467080 80.75 1 4 1 6 - - - - - - - -8.5 .3346 2467085 80.75 1 4 1 6 8.002 -8.814 105.05 88.95 83.55 80.90 78.10 75.90 72.759.0 .3543 2467090 75.70 1 4 1 7 8.815 -9.601 98.45 83.35 78.30 75.80 73.30 71.15 68.20

9.5 .3740 2467095 75.70 1 4 1 7 - - - - - - - -10.0 .3937 2467100 77.70 1 4 1 7 9.602 -10.389 100.45 85.40 80.30 77.80 75.30 73.15 70.2010.5 .4134 2467105 77.70 1 4 1 7 10.390 -11.201 100.45 85.40 80.30 77.80 75.30 73.15 70.2011.0 .4331 2467110 77.70 1 4 1 7 - - - - - - - -

11.5 .4528 2467115 81.00 1 4 1 7 11.202 -11.989 103.85 88.70 83.65 81.20 78.60 76.55 73.5512.0 .4724 2467120 81.00 1 6 1 8 11.990 -12.776 103.85 88.70 83.65 81.20 78.60 76.55 73.5512.5 .4921 2467125 81.00 1 6 1 8 - - - - - - - -13.0 .5118 2467130 83.20 1 6 1 8 12.777 -13.564 106.00 90.85 85.75 83.30 80.75 78.70 75.75

13.5 .5315 2467135 83.20 1 6 1 8 - - - - - - - -14.0 .5512 2467140 83.20 1 6 1 1⁄8 8 13.565 -14.376 106.00 90.85 85.75 83.30 80.75 78.70 75.7514.5 .5709 2467145 86.20 1 6 1 1⁄8 8 14.377 -15.164 108.95 93.80 88.80 86.35 83.75 81.60 78.7515.0 .5906 2467150 86.20 1 6 1 1⁄8 8 - - - - - - - -

15.5 .6102 2467155 86.20 2 6 1 ¼ 9 15.165 -15.951 108.95 93.80 88.80 86.35 83.75 81.60 78.7516.0 .6299 2467160 95.65 2 6 1 ¼ 9 15.952 -16.739 118.50 103.35 98.25 95.75 93.30 91.20 88.2516.5 .6496 2467165 95.65 2 6 1 ¼ 9 - - - - - - - -17.0 .6693 2467170 95.65 2 6 1 ¼ 9 16.740 -17.551 118.50 103.35 98.25 95.75 93.30 91.20 88.25

17.5 .6890 2467175 95.65 2 6 1 ¼ 9 - - - - - - - -18.0 .7087 2467180 95.95 2 6 1 ¼ 9 17.552 -18.339 118.75 103.60 98.60 96.10 93.55 91.40 88.5018.5 .7283 2467185 95.95 2 6 1 3⁄8 9 ½ 18.340 -19.126 118.75 103.60 98.60 96.10 93.55 91.40 88.5019.0 .7480 2467190 95.95 2 6 1 3⁄8 9 ½ - - - - - - - -

19.5 .7677 2467195 102.30 2 6 1 3⁄8 9 ½ 19.127 -19.914 125.05 110.00 104.90 102.40 99.90 97.75 94.8020.0 .7874 2467200 102.30 2 6 1 3⁄8 9 ½ 19.915 -20.726 125.05 110.00 104.90 102.40 99.90 97.75 94.8020.5 .8071 2467205 102.30 2 6 1 3⁄8 9 ½ - - - - - - - -21.0 .8268 2467210 106.10 2 6 1 3⁄8 9 ½ 20.727 -21.514 128.90 113.80 108.75 106.20 103.65 101.55 98.70

21.5 .8465 2467215 106.10 2 6 1 3⁄8 9 ½ - - - - - - - -22.0 .8661 2467220 106.10 2 6 1 ½ 10 21.515 -22.301 128.90 113.80 108.75 106.20 103.65 101.55 98.7022.5 .8858 2467225 115.85 2 6 1 ½ 10 22.302 -23.089 139.55 123.80 118.60 115.95 113.35 111.20 108.1523.0 .9055 2467230 115.85 2 6 1 ½ 10 - - - - - - - -

23.5 .9252 2467235 115.85 3 8 1 ½ 10 23.090 -23.901 139.55 123.80 118.60 115.95 113.35 111.20 108.1524.0 .9449 2467240 119.65 3 8 1 ½ 10 23.902 -24.689 143.35 127.70 122.40 119.85 117.15 114.95 112.0024.5 .9646 2467245 119.65 3 8 1 ½ 10 - - - - - - - -25.0 .9843 2467250 119.65 3 8 1 5⁄8 10 ½ 24.690 -25.476 143.35 127.70 122.40 119.85 117.15 114.95 112.00

25.5 1.0039 2467255 130.00 3 8 1 5⁄8 10 ½ 25.477 -27.076 153.70 137.95 132.70 130.15 127.50 125.40 122.3026.0 1.0236 2467260 130.00 3 8 1 5⁄8 10 ½ - - - - - - - -27.0 1.0630 2467270 130.00 3 8 1 5⁄8 10 ½ - - - - - - - -28.0 1.1024 2467280 130.00 3 8 1 ¾ 11 27.077 -28.651 153.70 137.95 132.70 130.15 127.50 125.40 122.30

29.0 1.1417 2467290 144.90 3 8 1 ¾ 11 28.652 -30.239 168.50 152.85 147.60 145.00 142.40 140.20 137.1530.0 1.1811 2467300 144.90 3 8 1 ¾ 11 - - - - - - - -31.0 1.2205 2467310 146.75 4 8 1 7⁄8 11 ½ 30.240 -31.826 170.40 154.70 149.40 146.85 144.25 142.05 139.0032.0 1.2598 2467320 159.35 4 8 1 7⁄8 11 ½ 31.827 -33.414 183.00 167.30 162.15 159.55 156.90 154.70 151.70

33.0 1.2992 2467330 159.35 4 8 1 7⁄8 11 ½ - - - - - - - -34.0 1.3386 2467340 173.65 4 8 2 12 33.415 -35.001 197.20 181.60 176.30 173.75 171.10 168.90 165.9035.0 1.3780 2467350 173.65 4 8 2 12 - - - - - - - -36.0 1.4173 2467360 194.30 4 8 2 12 35.002 -36.589 219.55 202.80 197.15 194.45 191.60 189.25 186.10

37.0 1.4567 2467370 200.75 4 8 2 1⁄8 12 ½ 36.590 -38.176 226.05 209.30 203.75 201.00 198.15 195.85 192.6038.0 1.4961 2467380 200.75 4 8 2 1⁄8 12 ½ - - - - - - - -39.0 1.5354 2467390 271.80 4 8 2 1⁄8 12 ½ 38.177 -39.776 297.00 280.30 274.70 271.90 269.15 266.80 263.5540.0 1.5748 2467400 271.80 4 8 2 ¼ 13 39.777 -41.351 297.00 280.30 274.70 271.90 269.15 266.80 263.55

41.0 1.6142 2467410 271.80 4 8 2 ¼ 13 - - - - - - - -42.0 1.6535 2467420 299.80 4 8 2 ¼ 13 41.352 -42.951 325.05 308.35 302.75 300.00 297.10 294.85 291.5543.0 1.6929 2467430 299.80 4 10 2 3⁄8 13 ½ 42.952 -44.526 325.05 308.35 302.75 300.00 297.10 294.85 291.5544.0 1.7323 2467440 299.80 4 10 2 3⁄8 13 ½ - - - - - - - -

EXPANSION CHUCKING REAMERS CARBIDE TIPPED - STRAIGHT FLUTE LONG CARBIDE & TAPER SHANK

TYPE 2467 - METRIC


MADE IN USA


SOLID CARBIDE HEAD REAMERS STRAIGHT FLUTES & STRAIGHT STEEL SHANK

**Quantities of 15 or more: price of fractional size in same size range.*Solid carbide head and shank (.0811” - .1910” tool diameters)

TOOLDIAMETER MAX.

SHANKDIAM.

NUMBEROF

FLUTES

LENGTHTYPE 2800

EDP NO.PRICE

SPECIALDECIMAL

SIZE RANGE


FRAC. DECIMAL FLUTE OVERALL 1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14**

- - .0800 4 ¾ 3 280099 - .0811 - .0890 $64.10 $47.40 $41.65 $39.05 $36.10 $33.903⁄32 .0938 .0880 4 ¾ 3 280006 $30.65 .0891 - .0970 64.10 47.40 41.65 39.05 36.10 33.907⁄64 .1094 .0943 4 7⁄8 3 ½ 280007 30.65 .0971 - .1120 64.10 47.40 41.65 39.05 36.10 33.901⁄8 .1250 .1099 4 7⁄8 3 ½ 280008 30.65 .1121 - .1280 64.10 47.40 41.65 39.05 36.10 33.90

9⁄64 .1406 .1255 4 7⁄8 3 ½ 280009 35.00 .1281 - .1435 68.50 51.70 46.05 43.40 40.55 38.255⁄32 .1562 .1411 4 1 4 280010 36.00 .1436 - .1590 69.45 52.75 47.05 44.40 41.50 39.3511⁄64 .1719 .1567 4 1 4 280011 40.60 .1591 - .1750 74.00 57.35 51.70 49.00 46.20 43.903⁄16 .1875 .1724 4 1 1⁄8 4 ½ 280012 41.45 .1751 - .1910 74.95 58.20 52.50 49.85 47.00 44.80

13⁄64 .2031 .1880 6 1 ¼ 5 280013 44.20 - - - - - - -7⁄32 .2188 .1880 6 1 ¼ 5 280014 44.20 .1911 - .2210 77.70 60.95 55.30 52.60 49.75 47.5515⁄64 .2344 .2193 6 1 ½ 6 280015 47.00 - - - - - - -¼ .2500 .2193 6 1 ½ 6 280016 47.00 .2211 - .2530 80.45 63.70 58.10 55.50 52.50 50.30

17⁄64 .2656 .2505 6 1 ½ 6 280017 50.55 - - - - - - -9⁄32 .2812 .2505 6 1 ½ 6 280018 50.55 .2531 - .2840 83.95 67.25 61.65 59.00 56.15 53.8519⁄64 .2969 .2817 6 1 5⁄8 6 280019 52.60 - - - - - - -5⁄16 .3125 .2817 6 1 5⁄8 6 280020 52.60 .2841 - .3150 86.05 69.30 63.70 61.05 58.20 55.90

21⁄64 .3281 .3130 6 1 5⁄8 6 280021 56.30 - - - - - - -11⁄32 .3438 .3130 6 1 5⁄8 6 280022 56.30 .3151 - .3470 89.75 72.95 67.30 64.65 61.80 59.6023⁄64 .3594 .3443 6 1 ¾ 7 280023 60.55 - - - - - - -3⁄8 .3750 .3443 6 1 ¾ 7 280024 60.55 .3471 - .3780 93.95 77.20 71.60 68.95 66.10 63.85

25⁄64 .3906 .3755 6 1 ¾ 7 280025 69.20 - - - - - - -13⁄32 .4062 .3755 6 1 ¾ 7 280026 69.20 .3781 - .4090 102.60 85.85 80.30 77.65 74.75 72.4527⁄64 .4219 .4067 6 1 ¾ 7 280027 73.50 - - - - - - -7⁄16 .4375 .4067 6 1 ¾ 7 280028 73.50 .4091 - .4410 106.90 90.15 84.60 81.95 79.00 76.75

29⁄64 .4531 .4380 6 1 ¾ 8 280029 77.90 - - - - - - -15⁄32 .4688 .4380 6 1 ¾ 8 280030 77.90 .4411 - .4720 111.35 94.60 89.00 86.35 83.50 81.2031⁄64 .4844 .4693 6 1 ¾ 8 280031 83.65 - - - - - - -½ .5000 .4693 6 1 ¾ 8 280032 83.65 .4721 - .5030 117.15 100.35 94.70 92.05 89.20 86.95

33⁄64 .5156 .5005 6 1 7⁄8 9 280033 107.90 - - - - - - -17⁄32 .5312 .5005 6 1 7⁄8 9 280034 107.90 .5031 - .5340 141.30 124.55 119.00 116.30 113.40 111.1535⁄64 .5469 .5005 6 1 7⁄8 9 280035 127.35 - - - - - - -9⁄16 .5625 .5005 6 1 7⁄8 9 280036 127.35 .5341 - .5660 160.80 144.00 138.40 135.75 132.85 130.65

37⁄64 .5781 .5630 6 1 7⁄8 9 280037 144.55 - - - - - - -19⁄32 .5938 .5630 6 1 7⁄8 9 280038 144.55 .5661 - .5970 177.95 161.25 155.60 152.90 150.10 147.8039⁄64 .6094 .5630 6 1 7⁄8 9 280039 146.15 - - - - - - -5⁄8 .6250 .5630 6 1 7⁄8 9 280040 146.15 .5971 - .6280 179.55 162.80 157.25 154.60 151.70 149.40

21⁄32 .6562 .6255 6 2 9 ½ 280042 211.45 .6281 - .6590 243.25 227.30 222.00 219.45 217.05 214.5511⁄16 .6875 .6255 6 2 9 ½ 280044 211.45 .6591 - .6910 243.25 227.30 222.00 219.45 217.05 214.5523⁄32 .7188 .6880 6 2 9 ½ 280046 237.90 .6911 - .7220 269.70 253.75 248.45 245.90 243.50 241.00¾ .7500 .6880 6 2 9 ½ 280048 237.90 .7221 - .7530 269.70 253.75 248.45 245.90 243.50 241.00

25⁄32 .7812 .7505 8 2 10 280050 264.10 .7531 - .7840 295.90 279.95 274.65 272.10 269.65 267.1513⁄16 .8125 .7817 8 2 10 280052 288.15 .7841 - .8160 319.95 304.00 298.70 296.15 293.75 291.2527⁄32 .8438 .8130 8 2 10 280054 303.90 .8161 - .8470 335.70 319.75 314.45 311.90 309.45 307.007⁄8 .8750 .8440 8 2 10 280056 297.55 .8471 - .8780 329.35 313.40 308.10 305.55 303.10 300.60

29⁄32 .9062 .8755 8 2 10 280058 348.15 .8781 - .9090 379.95 364.00 358.70 356.15 353.70 351.2515⁄16 .9375 .9067 8 2 10 280060 365.95 .9091 - .9410 397.75 381.80 376.50 373.95 371.55 369.0531⁄32 .9688 .9380 8 2 10 280062 383.35 .9411 - .9720 415.15 399.20 393.90 391.35 388.90 386.40

1 1.0000 .9693 8 2 10 280064 397.80 .9721 - 1.0030 429.60 413.65 408.35 405.80 403.40 400.90

MADE IN USA


****

****

TYPE 2800 - FINISHED FRACTIONAL SIZESSolid carbide head.Straight steel shank on .1911” tool diameter and larger (smaller sizeshave a straight solid carbide shank).Diameters 7⁄64” and below provided with male centers.Tool diameter tolerance thru .2500”: plus .0002”, minus .0000”. over .2500”: plus .0003”, minus .0000”.Shank diameter tolerance: plus .0000”, minus .0010”.

NOTE: For best results in reaming tough steel alloys and cast steels, werecommend Type 2480 Carbide Tipped Reamer (page 58).This reamer utilizes a special steel cutting grade carbide with excellent cutting and wear characteristics.


TOOLDIAMETER MAX.

SHANKDIAM.

NO.OF

FLTS.

LENGTH TYPE 2810R SPIRALEDP NO.

TYPE 2820L SPIRALEDP NO.

BOTHTYPESPRICE

SPECIALDECIMAL

SIZE RANGE


FRAC. DEC. FLUTE OVERALL 1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14**

1⁄8 .1250 .1099 4 7⁄8 3 ½ 281008 282008 $37.30 .1121 - .1280 $70.80 $54.05 $48.35 $45.70 $42.80 $40.609⁄64 .1406 .1255 4 7⁄8 3 ½ 281009 282009 42.60 .1281 - .1435 76.10 59.30 53.70 51.05 48.20 45.955⁄32 .1562 .1411 4 1 4 281010 282010 44.00 .1436 - .1590 77.45 60.60 55.00 52.35 49.45 47.2011⁄64 .1719 .1567 4 1 4 281011 282011 49.50 .1591 - .1750 83.05 66.25 60.60 57.95 55.10 52.90

3⁄16 .1875 .1724 4 1 1⁄8 4 ½ 281012 282012 50.55 .1751 - .1910 83.95 67.25 61.65 59.00 56.15 53.8513⁄64 .2031 .1880 6 1 ¼ 5 281013 282013 53.85 - - - - - - -7⁄32 .2188 .1880 6 1 ¼ 5 281014 282014 53.85 .1911 - .2210 87.30 70.55 65.00 62.35 59.35 57.1515⁄64 .2344 .2193 6 1 ½ 6 281015 282015 57.40 - - - - - - -

¼ .2500 .2193 6 1 ½ 6 281016 282016 57.40 .2211 - .2530 90.80 74.00 68.50 65.75 62.85 60.6017⁄64 .2656 .2505 6 1 ½ 6 281017 282017 61.65 - - - - - - -9⁄32 .2812 .2505 6 1 ½ 6 281018 282018 61.65 .2531 - .2840 95.10 78.35 72.70 70.05 67.15 65.0019⁄64 .2969 .2817 6 1 5⁄8 6 281019 282019 64.25 - - - - - - -

5⁄16 .3125 .2817 6 1 5⁄8 6 281020 282020 64.25 .2841 - .3150 97.65 80.90 75.30 72.60 69.75 67.4521⁄64 .3281 .3130 6 1 5⁄8 6 281021 282021 68.60 - - - - - - -11⁄32 .3438 .3130 6 1 5⁄8 6 281022 282022 68.60 .3151 - .3470 102.00 85.30 79.65 76.95 74.10 71.9023⁄64 .3594 .3443 6 1 ¾ 7 281023 282023 73.85 - - - - - - -

3⁄8 .3750 .3443 6 1 ¾ 7 281024 282024 73.85 .3471 - .3780 107.20 90.45 84.90 82.25 79.35 77.0525⁄64 .3906 .3755 6 1 ¾ 7 281025 282025 84.40 - - - - - - -13⁄32 .4062 .3755 6 1 ¾ 7 281026 282026 84.40 .3781 - .4090 117.80 101.05 95.45 92.75 89.95 87.6527⁄64 .4219 .4067 6 1 ¾ 7 281027 282027 89.55 - - - - - - -

7⁄16 .4375 .4067 6 1 ¾ 7 281028 282028 89.55 .4091 - .4410 122.95 106.20 100.65 98.00 95.10 92.8029⁄64 .4531 .4380 6 1 ¾ 8 281029 282029 95.05 - - - - - - -15⁄32 .4688 .4380 6 1 ¾ 8 281030 282030 95.05 .4411 - .4720 128.40 111.70 106.10 103.45 100.60 98.3031⁄64 .4844 .4693 6 1 ¾ 8 281031 282031 101.95 - - - - - - -

½ .5000 .4693 6 1 ¾ 8 281032 282032 101.95 .4721 - .5030 135.35 118.65 113.05 110.35 107.55 105.2533⁄64 .5156 .5005 6 1 7⁄8 9 281033 282033 131.45 - - - - - - -17⁄32 .5312 .5005 6 1 7⁄8 9 281034 282034 131.45 .5031 - .5340 164.95 148.15 142.50 139.85 137.00 134.8035⁄64 .5469 .5005 6 1 7⁄8 9 281035 282035 155.30 - - - - - - -

9⁄16 .5625 .5005 6 1 7⁄8 9 281036 282036 155.30 .5341 - .5660 188.75 171.95 166.30 163.65 160.80 158.5037⁄64 .5781 .5630 6 1 7⁄8 9 281037 282037 176.15 - - - - - - -19⁄32 .5938 .5630 6 1 7⁄8 9 281038 282038 176.15 .5661 - .5970 209.55 192.85 187.25 184.60 181.70 179.4539⁄64 .6094 .5630 6 1 7⁄8 9 281039 282039 178.20 - - - - - - -

5⁄8 .6250 .5630 6 1 7⁄8 9 281040 282040 178.20 .5971 - .6280 211.70 194.95 189.25 186.60 183.75 181.5021⁄32 .6562 .6255 6 2 9 ½ 281042 282042 258.00 .6281 - .6590 296.80 277.35 270.90 267.75 264.80 261.7511⁄16 .6875 .6255 6 2 9 ½ 281044 282044 258.00 .6591 - .6910 296.80 277.35 270.90 267.75 264.80 261.7523⁄32 .7188 .6880 6 2 9 ½ 281046 282046 290.30 .6911 - .7220 329.10 309.55 303.10 300.05 297.05 294.00

¾ .7500 .6880 6 2 9 ½ 281048 282048 290.30 .7221 - .7530 329.10 309.55 303.10 300.05 297.05 294.0025⁄32 .7812 .7505 8 2 10 281050 282050 322.20 .7531 - .7840 361.00 341.55 335.05 331.95 328.95 325.9513⁄16 .8125 .7817 8 2 10 281052 282052 351.55 .7841 - .8160 390.35 370.90 364.45 361.30 358.35 355.3027⁄32 .8438 .8130 8 2 10 281054 282054 370.75 .8161 - .8470 409.55 390.10 383.60 380.55 377.55 374.50

7⁄8 .8750 .8440 8 2 10 281056 282056 363.00 .8471 - .8780 401.80 382.35 375.90 372.75 369.80 366.7529⁄32 .9062 .8755 8 2 10 281058 282058 424.75 .8781 - .9090 463.55 444.10 437.60 434.50 431.55 428.5015⁄16 .9375 .9067 8 2 10 281060 282060 446.45 .9091 - .9410 485.25 465.80 459.35 456.20 453.25 450.2531⁄32 .9688 .9380 8 2 10 281062 282062 467.65 .9411 - .9720 506.45 487.00 480.55 477.40 474.45 471.45

1 1.0000 .9693 8 2 10 281064 282064 485.30 .9721 - 1.0030 524.10 504.65 498.20 495.15 492.10 489.10

SOLID CARBIDE HEAD REAMERS RIGHT OR LEFT SPIRAL FLUTES & STRAIGHT STEEL SHANK

**Quantities of 15 or more: price of fractional size in same size range.*Solid carbide head and shank (.1121” - .1910” tool diameters)

MADE IN USA


TYPE 2810 - FINISHED FRACTIONAL SIZES - RIGHT HAND SPIRAL

TYPE 2820 - FINISHED FRACTIONAL SIZES - LEFT HAND SPIRALSolid carbide head.Straight steel shank on .1911” tool diameter and larger (smaller sizeshave a straight solid carbide shank).Tool diameter tolerance thru .2500”: plus .0002”, minus .0000”. over .2500”: plus .0003”, minus .0000”.Shank diameter tolerance: plus .0000”, minus .0010”.Left spiral >utes should not be used on blind holes.


NOTE: For best results in reaming tough steel alloys and cast steels, we recommend Type 2480 Carbide Tipped Reamer (page 58). This reamer utilizes a special steel cutting grade of carbide with excellent cutting and wear characteristics.

****

*

TOOLDIAM.

EDP NO.

PRICE

.0280 28040280 $22.00

.0285 28040285 23.20

.0290 28040290 23.20

.0295 28040295 22.00

.0300 28040300 23.20

.0305 28040305 23.20

.0310 28040310 22.00

.0315 2804008 22.00

.0320 28040320 22.00

.0325 28040325 23.20

.0330 28040330 22.00

.0335 28040335 22.00

.0340 28040340 22.40

.0345 28040345 22.40

.0350 28040350 21.30

.0355 28040355 22.40

.0360 28040360 21.30

.0365 28040365 22.40

.0370 28040370 21.30

.0375 28040375 22.40

.0380 28040380 21.30

.0385 28040385 22.40

.0390 28040390 21.30

.0395 28040395 22.40

.0400 28040400 21.30

.0405 28040405 22.40

.0410 28040410 21.30

.0415 28040415 22.40

.0420 28040420 21.30

.0425 28040425 22.40

.0430 28040430 21.30

.0435 28040435 22.60

.0440 28040440 22.60

.0445 28040445 22.60

.0450 28040450 22.60

.0455 28040455 22.60

.0460 28040460 22.60

.0465 28040465 21.45

.0470 28040470 22.60

.0475 28040475 22.60

.0480 28040480 22.60

.0485 28040485 22.60

.0490 28040490 22.60

.0495 28040495 22.60

.0500 28040500 22.60

.0505 28040505 22.60

.0510 28040510 22.60

.0515 28040515 22.60

.0520 28040520 21.45

.0525 28040525 22.60

.0530 28040530 22.60

.0535 28040535 22.60

.0540 28040540 22.60

.0545 28040545 22.60

.0550 28040550 21.45

.0555 28040555 22.60

.0560 28040560 22.60

.0565 28040565 22.60

.0570 28040570 22.60

.0575 28040575 22.60

TOOLDIAM.

EDP NO.

PRICE

.0580 28040580 $22.60

.0585 28040585 22.60

.0590 28040590 19.65

.0595 28040595 21.45

.0600 28040600 23.20

.0605 28040605 23.20

.0610 28040610 22.00

.0615 28040615 23.20

.0620 28040620 23.20

.0625 280404 20.25

.0630 2804016 22.00

.0635 28040635 22.00

.0640 28040640 23.20

.0645 28040645 23.20

.0650 28040650 23.35

.0655 28040655 23.35

.0660 28040660 23.35

.0665 28040665 23.35

.0670 28040670 22.25

.0675 28040675 23.35

.0680 28040680 23.35

.0685 28040685 23.35

.0690 28040690 23.35

.0695 28040695 23.35

.0700 28040700 22.25

.0705 28040705 23.35

.0710 28040710 23.35

.0715 28040715 23.35

.0720 28040720 23.35

.0725 28040725 23.35

.0730 28040730 22.25

.0735 28040735 23.35

.0740 28040740 23.35

.0745 28040745 23.35

.0750 28040750 23.35

.0755 28040755 23.35

.0760 28040760 22.25

.0765 28040765 23.35

.0770 28040770 23.35

.0775 28040775 23.35

.0780 28040780 23.35

.0785 28040785 22.30

.0790 28040790 23.45

.0795 28040795 23.45

.0800 28040800 23.45

.0805 28040805 23.45

.0810 28040810 22.30

.0815 28040815 23.55

.0820 28040820 22.40

.0825 28040825 23.55

.0830 28040830 23.55

.0835 28040835 23.55

.0840 28040840 23.55

.0845 28040845 23.55

.0850 28040850 23.55

.0855 28040855 23.55

.0860 28040860 22.40

.0865 28040865 23.55

.0870 28040870 23.55

.0875 28040875 23.55

TOOLDIAM.

EDP NO.

PRICE

.0880 28040880 $23.55

.0885 28040885 23.55

.0890 28040890 22.80

.0895 28040895 24.10

.0900 28040900 24.10

.0905 28040905 24.10

.0910 28040910 24.20

.0915 28040915 24.20

.0920 28040920 24.20

.0925 28040925 22.90

.0930 28040930 24.20

.0935 28040935 22.90

.0940 28040940 24.20

.0945 2804024 22.90

.0950 28040950 24.50

.0955 28040955 24.50

.0960 28040960 23.35

.0965 28040965 23.35

.0970 28040970 24.50

.0975 28040975 24.50

.0980 28040980 23.35

.0985 28040985 24.70

.0990 28040990 24.70

.0995 28040995 23.55

.1000 28041000 24.70

.1005 28041005 24.70

.1010 28041010 24.70

.1015 28041015 23.55

.1020 28041020 24.90

.1025 28041025 25.00

.1030 28041030 25.00

.1035 28041035 25.00

.1040 28041040 25.00

.1045 28041045 25.00

.1050 28041050 25.00

.1055 28041055 25.00

.1060 28041060 25.00

.1065 28041065 23.75

.1070 28041070 25.40

.1075 28041075 25.40

.1080 28041080 25.40

.1085 28041085 25.70

.1090 28041090 25.70

.1095 28041095 25.70

.1100 28041100 24.50

.1105 28041105 26.10

.1110 28041110 24.90

.1115 28041115 26.55

.1120 28041120 26.55

.1125 28041125 26.55

.1130 28041130 25.25

.1135 28041135 26.55

.1140 28041140 26.55

.1145 28041145 26.55

.1150 28041150 26.55

.1155 28041155 26.55

.1160 28041160 25.25

.1165 28041165 26.55

.1170 28041170 26.55

.1175 28041175 26.55

TOOLDIAM.

EDP NO.

PRICE

.1180 28041180 $26.55

.1185 28041185 26.65

.1190 28041190 26.65

.1195 28041195 26.65

.1200 28041200 25.35

.1205 28041205 26.65

.1210 28041210 26.65

.1215 28041215 26.65

.1220 2804031 25.35

.1225 28041225 26.65

.1230 28041230 26.65

.1235 28041235 26.65

.1240 28041240 26.65

.1245 28041245 26.65

.1250 280408 23.35

.1255 28041255 26.65

.1260 2804032 25.35

.1265 28041265 26.75

.1270 28041270 26.75

.1275 28041275 26.75

.1280 28041280 25.40

.1285 28041285 25.40

.1290 28041290 26.75

.1295 28041295 26.75

.1300 28041300 26.75

.1305 28041305 26.75

.1310 28041310 26.75

.1315 28041315 26.75

.1320 28041320 26.75

.1325 28041325 26.75

.1330 28041330 26.75

.1335 28041335 26.75

.1340 28041340 26.75

.1345 28041345 26.75

.1350 28041350 26.75

.1355 28041355 26.75

.1360 28041360 25.40

.1365 28041365 26.75

.1370 28041370 26.75

.1375 28041375 26.75

.1380 28041380 27.20

.1385 28041385 27.20

.1390 28041390 27.20

.1395 28041395 27.20

.1400 28041400 27.20

.1405 28041405 25.70

.1410 28041410 28.25

.1415 28041415 28.25

.1420 28041420 28.25

.1425 28041425 28.25

.1430 28041430 28.25

.1435 28041435 28.25

.1440 28041440 26.90

.1445 28041445 28.40

.1450 28041450 28.45

.1455 28041455 28.45

.1460 28041460 29.20

.1465 28041465 29.20

.1470 28041470 27.70

.1475 28041475 29.20

TOOLDIAM.

EDP NO.

PRICE

.1480 28041480 $29.25

.1485 28041485 29.25

.1490 28041490 29.25

.1495 28041495 27.85

.1500 28041500 29.25

.1505 28041505 29.25

.1510 28041510 29.25

.1515 28041515 29.25

.1520 28041520 27.85

.1525 28041525 30.50

.1530 28041530 30.50

.1535 2804039 29.00

.1540 28041540 29.00

.1545 28041545 30.50

.1550 28041550 30.50

.1555 28041555 29.00

.1560 28041560 30.50

.1565 28041565 31.60

.1570 28041570 30.00

.1575 2804040 27.40

.1580 28041580 32.25

.1585 28041585 32.25

.1590 28041590 30.75

.1595 28041595 32.80

.1600 28041600 32.80

.1605 28041605 32.80

.1610 28041610 31.15

.1615 28041615 32.80

.1620 28041620 32.80

.1625 28041625 32.80

.1630 28041630 32.80

.1635 28041635 32.90

.1640 28041640 32.80

.1645 28041645 32.80

.1650 28041650 32.80

.1655 28041655 32.80

.1660 28041660 31.30

.1665 28041665 33.20

.1670 28041670 33.20

.1675 28041675 33.20

.1680 28041680 33.20

.1685 28041685 33.20

.1690 28041690 33.20

.1695 28041695 31.65

.1700 28041700 33.90

.1705 28041705 33.90

.1710 28041710 33.90

.1715 28041715 33.90

.1720 28041720 33.90

.1725 28041725 33.90

.1730 28041730 32.25

.1735 28041735 34.40

.1740 28041740 34.40

.1745 28041745 34.40

.1750 28041750 34.40

.1755 28041755 34.75

.1760 28041760 34.75

.1765 28041765 34.75- - -- - -

CHUCKING REAMERS SOLID CARBIDE - STRAIGHT FLUTES & STRAIGHT SHANK - SHORT SERIES

TYPE 2804 - .0005 INCREMENTSSTOCKED DECIMAL TOOL DIAMETERS (.0280 - .1765)NOTE: Dimension details (.0591 and larger) on page 72.

MADE IN USA


TOOL DIAMETER TYPE2804

EDP NO.PRICEFRAC-

TIONWIRE

METRIC(mm)

DECI-MAL

* 1⁄32 .0312 280402 $20.25*1.0 .0394 2804010 19.40*1.1 .0433 2804011 21.30

* 3⁄64 .0469 280403 21.45

*1.2 .0472 2804012 21.45*1.3 .0512 2804013 21.45*1.4 .0551 2804014 21.451.5 .0591 2804015 19.65

1⁄16 .0625 280404 20.251.6 .0630 2804016 22.001.7 .0669 2804017 22.25

51 .0670 28040670 22.25

50 .0700 28040700 22.251.8 .0709 2804018 22.25

49 .0730 28040730 22.251.9 .0748 2804019 22.25

48 .0760 28040760 22.255⁄64 .0781 280405 22.25

47 .0785 28040785 22.302.0 .0787 2804020 20.50

46 .0810 28040810 22.3045 .0820 28040820 22.40

2.1 .0827 2804021 22.4044 .0860 28040860 22.40

2.2 .0866 2804022 22.4043 .0890 28040890 22.80

2.3 .0906 2804023 22.8042 .0935 28040935 22.90

3⁄32 .0938 280406 21.102.4 .0945 2804024 22.90

41 .0960 28040960 23.3540 .0980 28040980 23.35

2.5 .0984 2804025 21.3039 .0995 28040995 23.5538 .1015 28041015 23.55

2.6 .1024 2804026 23.65

37 .1040 28041040 25.002.7 .1063 2804027 23.75

36 .1065 28041065 23.757⁄64 .1094 280407 24.50

35 .1100 28041100 24.502.8 .1102 2804028 24.50

34 .1110 28041110 24.9033 .1130 28041130 25.25

2.9 .1142 2804029 25.2532 .1160 28041160 25.25

3.0 .1181 2804030 23.3531 .1200 28041200 25.35

3.1 .1220 2804031 25.351⁄8 .1250 280408 23.35

3.2 .1260 2804032 25.3530 .1285 28041285 25.40

3.3 .1299 2804033 25.403.4 .1339 2804034 25.40

29 .1360 28041360 25.403.5 .1378 2804035 23.65

28 .1405 28041405 25.709⁄64 .1406 280409 26.55

3.6 .1417 2804036 26.9027 .1440 28041440 26.90


EDP NO.PRICEFRAC-

TIONWIRE/

LETTERMETRIC

(mm)DECI-MAL

3.7 .1457 2804037 $27.2026 .1470 28041470 27.7025 .1495 28041495 27.85

3.8 .1496 2804038 29.25

24 .1520 28041520 27.853.9 .1535 2804039 29.00

23 .1540 28041540 29.005⁄32 .1562 280410 27.40

22 .1570 28041570 30.004.0 .1575 2804040 27.40

21 .1590 28041590 30.7520 .1610 28041610 31.15

4.1 .1614 2804041 31.154.2 .1654 2804042 31.30

19 .1660 28041660 31.304.3 .1693 2804043 31.65

18 .1695 28041695 31.6511⁄64 .1719 280411 32.25

17 .1730 28041730 32.254.4 .1732 2804044 32.25

16 .1770 28041770 33.054.5 .1772 2804045 30.00

15 .1800 28041800 33.204.6 .1811 2804046 33.65

14 .1820 28041820 33.7013 4.7 .1850 2804047 33.90

3⁄16 .1875 280412 32.5512 4.8 .1890 2804048 35.75

11 .1910 28041910 36.204.9 .1929 2804049 36.20

10 .1935 28041935 36.409 .1960 28041960 37.70

5.0 .1969 2804050 34.408 .1990 28041990 37.90

5.1 .2008 2804051 39.107 .2010 28042010 39.10

13⁄64 .2031 280413 39.106 .2040 28042040 39.10

5.2 .2047 2804052 39.105 .2055 28042055 39.10

5.3 .2087 2804053 39.104 .2090 28042090 41.10

5.4 .2126 2804054 39.103 .2130 28042130 39.10

5.5 .2165 2804055 35.757⁄32 .2188 280414 35.65

5.6 .2205 2804056 43.602 .2210 28042210 43.60

5.7 .2244 2804057 45.251 .2280 28042280 45.80

5.8 .2283 2804058 45.805.9 .2323 2804059 45.80

A .2340 28042340 45.8015⁄64 .2344 280415 45.80

6.0 .2362 2804060 42.45B .2380 28042380 46.70

6.1 .2402 2804061 46.70C .2420 28042420 46.70

6.2 .2441 2804062 46.70D .2460 28042460 46.70


EDP NO.PRICEFRAC-

TIONLET-TER

METRIC(mm)

DECI-MAL

6.3 .2480 2804063 $46.70¼ E .2500 280416 42.45

6.4 .2520 2804064 51.456.5 .2559 2804065 51.40

F .2570 28042570 51.406.6 .2598 2804066 53.90

G .2610 28042610 51.406.7 .2638 2804067 53.90

17⁄64 .2656 280417 51.40H .2660 28042660 51.40

6.8 .2677 2804068 53.906.9 .2717 2804069 53.90

I .2720 28042720 51.407.0 .2756 2804070 46.90

J .2770 28042770 51.407.1 .2795 2804071 58.55

K .2810 28042810 55.709⁄32 .2812 280418 50.95

7.2 .2835 2804072 63.257.3 .2874 2804073 63.25

L .2900 28042900 60.357.4 .2913 2804074 63.25

M .2950 28042950 60.357.5 .2953 2804075 60.35

19⁄64 .2969 280419 60.357.6 .2992 2804076 66.00

N .3020 28043020 62.857.7 .3031 2804077 66.00

7.8 .3071 2804078 66.007.9 .3110 2804079 66.00

5⁄16 .3125 280420 57.458.0 .3150 2804080 57.45

O .3160 28043160 66.008.1 .3189 2804081 70.258.2 .3228 2804082 70.25

P .3230 28043230 66.80

8.3 .3268 2804083 80.3521⁄64 .3281 280421 76.45

8.4 .3307 2804084 80.35Q .3320 28043320 76.45

8.5 .3346 2804085 76.458.6 .3386 2804086 80.35

R .3390 28043390 76.458.7 .3425 2804087 80.35

11⁄32 .3438 280422 76.458.8 .3465 2804088 80.65

S .3480 28043480 76.808.9 .3504 2804089 80.65

9.0 .3543 2804090 70.60T .3580 28043580 77.10

9.1 .3583 2804091 81.4023⁄64 .3594 280423 77.50

9.2 .3622 2804092 82.409.3 .3661 2804093 82.40

U .3680 28043680 78.509.4 .3701 2804094 82.85

9.5 .3740 2804095 78.953⁄8 .3750 280424 72.25

V .3770 28043770 93.759.6 .3780 2804096 98.60

CHUCKING REAMERS SOLID CARBIDE - STRAIGHT FLUTES & STRAIGHT SHANK - SHORT SERIES

TYPE 2804 - FRACTIONAL, WIRE/LETTER & METRICNOTE: Dimension details (.0591 and larger) on page 72.

*Dimensions thru .0590” tool diameter: # of >utes = 4; >ute length = 3⁄8” (except for .0312” & .0394” tool diameters, >ute = ¼”); overall length = 1 ½”

MADE IN USA


TOOLDIAMETER

RANGE

DIMENSIONSTYPE 2802STRAIGHTEDP NO.

PRICE EACH - FINISHED TO DECIMAL SIZEMAX.

SHANKDIAM.

NO. OF

FLUTES

LENGTH

FLUTE OVERALL 1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14 OVER 14

0.0591 - 0.0660 .0580 4 3⁄8 1 ½ 280204 $67.90 $42.25 $33.70 $29.65 $25.30 $21.80 $16.800.0661 - 0.0740 .0650 4 ½ 1 ¾ 280245 68.10 42.45 33.90 29.80 25.45 22.00 17.000.0741 - 0.0810 .0730 4 ½ 1 ¾ 280205 68.20 42.55 33.95 30.00 25.50 22.15 17.050.0811 - 0.0890 .0800 4 ½ 2 280255 68.60 43.00 34.45 30.40 26.05 22.55 17.55

0.0891 - 0.0970 .0880 4 ½ 2 280206 69.05 43.40 34.85 30.80 26.45 22.90 17.950.0971 - 0.1120 .0943 4 5⁄8 2 ¼ 280207 69.30 43.65 35.10 31.05 26.65 23.20 18.200.1121 - 0.1280 .1099 4 5⁄8 2 ¼ 280208 70.50 44.85 36.30 32.25 27.85 24.40 19.400.1281 - 0.1435 .1255 4 ¾ 2 ½ 280209 71.00 45.40 36.80 32.80 28.40 24.95 19.90

0.1436 - 0.1590 .1411 4 ¾ 2 ½ 280210 72.20 46.55 38.00 33.95 29.60 26.10 21.100.1591 - 0.1750 .1567 4 7⁄8 2 ¾ 280211 74.95 49.25 40.70 36.70 32.30 28.85 23.800.1751 - 0.1910 .1724 4 7⁄8 2 ¾ 280212 76.75 51.10 42.55 38.55 34.05 30.70 25.600.1911 - 0.2210 .1880 6 1 3 280214 79.90 54.30 45.75 41.70 37.35 33.85 28.85

0.2211 - 0.2530 .2193 6 1 3 280216 85.35 59.75 51.20 47.15 42.80 39.30 34.300.2531 - 0.2840 .2505 6 1 1⁄8 3 ¼ 280218 91.70 66.05 57.50 53.45 49.10 45.60 40.600.2841 - 0.3150 .2817 6 1 1⁄8 3 ¼ 280220 98.70 73.05 64.40 60.45 56.10 52.60 47.600.3151 - 0.3470 .3130 6 1 ¼ 3 ½ 280222 109.00 83.45 74.90 70.85 66.45 62.90 58.00

0.3471 - 0.3780 .3443 6 1 ¼ 3 ½ 280224 110.40 84.80 76.30 72.20 67.85 64.30 59.350.3781 - 0.4090 .3755 6 1 3⁄8 3 ¾ 280226 119.55 93.90 85.35 81.25 76.90 73.45 68.400.4091 - 0.4410 .4067 6 1 3⁄8 3 ¾ 280228 120.55 94.90 86.35 82.30 77.95 74.45 69.450.4411 - 0.4720 .4380 6 1 ½ 4 280230 127.90 102.25 93.70 89.65 85.30 81.85 76.80

0.4721 - 0.5150 .4693 6 1 ½ 4 280232 135.00 109.40 100.75 96.80 92.40 88.95 83.90

CHUCKING REAMERS - SOLID CARBIDESTRAIGHT FLUTES & STRAIGHT SHANK - SHORT SERIES

TOOLDIAMETER

RANGE

DIMENSIONSTYPE 2812R SPIRALEDP NO.

TYPE 2822L SPIRALEDP NO.

PRICE EACH - FINISHED TO DECIMAL SIZEMAX.

SHANKDIAM.

NO. OF

FLUTES

LENGTH

FLUTE OVERALL 1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14 OVER 14

0.0971 - 0.1120 .0943 4 5⁄8 2 ¼ 281207 282207 $68.35 $43.75 $35.50 $31.60 $27.35 $24.05 $19.200.1121 - 0.1280 .1099 4 5⁄8 2 ¼ 281208 282208 69.65 45.00 36.75 32.90 28.60 25.30 20.500.1281 - 0.1435 .1255 4 ¾ 2 ½ 281209 282209 73.70 47.90 39.25 35.15 30.75 27.20 22.150.1436 - 0.1590 .1411 4 ¾ 2 ½ 281210 282210 75.10 49.20 40.55 36.50 32.05 28.50 23.55

0.1591 - 0.1750 .1567 4 7⁄8 2 ¾ 281211 282211 78.10 52.25 43.60 39.45 35.10 31.55 26.500.1751 - 0.1910 .1724 4 7⁄8 2 ¾ 281212 282212 80.05 54.25 45.55 41.45 37.00 33.50 28.450.1911 - 0.2210 .1880 6 1 3 281214 282214 87.55 60.50 51.45 47.15 42.50 38.80 33.500.2211 - 0.2530 .2193 6 1 3 281216 282216 94.00 66.80 57.75 53.50 48.85 45.25 39.95

0.2531 - 0.2840 .2505 6 1 1⁄8 3 ¼ 281218 282218 101.35 74.25 65.20 60.95 56.25 52.65 47.300.2841 - 0.3150 .2817 6 1 1⁄8 3 ¼ 281220 282220 109.35 82.25 73.20 68.95 64.30 60.60 55.300.3151 - 0.3470 .3130 6 1 ¼ 3 ½ 281222 282222 121.45 94.35 85.30 81.00 76.35 72.65 67.350.3471 - 0.3780 .3443 6 1 ¼ 3 ½ 281224 282224 123.05 95.95 86.95 82.60 78.00 74.30 69.00

0.3781 - 0.4090 .3755 6 1 3⁄8 3 ¾ 281226 282226 126.50 99.35 90.30 85.95 81.35 77.70 72.400.4091 - 0.4410 .4067 6 1 3⁄8 3 ¾ 281228 282228 127.55 100.35 91.30 87.05 82.40 78.70 73.450.4411 - 0.4720 .4380 6 1 ½ 4 281230 282230 135.30 108.15 99.10 94.85 90.25 86.55 81.200.4721 - 0.5150 .4693 6 1 ½ 4 281232 282232 142.80 115.70 106.60 102.40 97.70 94.05 88.75

CHUCKING REAMERS - SOLID CARBIDERIGHT SPIRAL OR LEFT SPIRAL FLUTES - STRAIGHT SHANK - SHORT SERIES

TYPE 2802 - STRAIGHT FLUTES - STRAIGHT SHANKSolid carbide head and straight shank.Tool diameter tolerance thru .2500”: plus .0002”, minus .0000”. over .2500”: plus .0003”, minus .0000”.Shank diameter tolerance: plus .0000”, minus .0010”.

TYPE 2812 - RIGHT SPIRAL FLUTES - STRAIGHT SHANK

TYPE 2822 - LEFT SPIRAL FLUTES - STRAIGHT SHANKSolid carbide head and straight shank.Tool diameter tolerance thru .2500”: plus .0002”, minus .0000”. over .2500”: plus .0003”, minus .0000”.Shank diameter tolerance: plus .0000”, minus .0010”.Left spiral >utes should not be used on blind holes.

*Provided with male centers

*Provided with male centers

MADE IN USA


****

**

*

SEMI-FINISHEDTOOL

DIAMETERRANGE

TYPE 2400 - PAGE 38 TYPE 2402 - PAGE 44 TYPE 2410 - PAGE 58 TYPE 2430PAGE 31

EDP NO.

TYPE 2440PAGE 31

EDP NO.

TYPE 2430 OR

2440 PRICE

TYPE 2450 - PAGE 46 TYPE 2465 - PAGE 54

EDP NO. PRICE EDP NO. PRICE EDP NO. PRICE EDP NO. PRICE EDP NO. PRICE

0.1770- 0.2040 240006SF $28.65 - - 241006SF $40.35 243006SF 244006SF $37.35 245006SF $34.30 - -0.2041- 0.2210 240007SF 28.65 - - 241007SF 40.35 243007SF 244007SF 37.35 245007SF 34.30 - -0.2211- 0.2380 24002344SF 30.30 - - 24102344SF 40.35 24302344SF 24402344SF 37.35 24502344SF 34.30 - -0.2381- 0.2530 240008SF 28.65 240208SF $33.05 241008SF 40.35 243008SF 244008SF 37.35 245008SF 34.30 - -

0.2531- 0.2840 240009SF 29.20 240209SF 33.55 241009SF 40.45 243009SF 244009SF 37.35 245009SF 35.10 - -0.2841- 0.3150 240010SF 29.20 240210SF 33.55 241010SF 40.45 243010SF 244010SF 43.40 245010SF 35.10 246510SF $52.900.3151- 0.3470 240011SF 30.25 240211SF 34.80 241011SF 44.50 243011SF 244011SF 43.85 245011SF 36.30 246511SF 52.900.3471- 0.3780 240012SF 27.75 240212SF 32.00 241012SF 44.90 243012SF 244012SF 47.50 245012SF 36.30 246512SF 49.50

0.3781- 0.4090 240013SF 31.70 240213SF 36.50 241013SF 46.95 243013SF 244013SF 48.10 245013SF 38.05 246513SF 52.500.4091- 0.4410 240014SF 33.80 240214SF 38.90 241014SF 48.80 243014SF 244014SF 57.10 245014SF 41.20 246514SF 52.500.4411- 0.4720 240015SF 34.40 240215SF 40.00 241015SF 51.85 243015SF 244015SF 57.10 245015SF 44.50 246515SF 55.700.4721- 0.5030 240016SF 40.95 240216SF 47.05 241016SF 53.80 243016SF 244016SF 62.40 245016SF 47.75 246516SF 55.70





PILOT HEADDIAMETER

SHANK DIAMETER ALLTYPESPRICEFRAC. DECIMAL

3⁄32EDP NO.

5⁄32EDP NO.

3⁄16EDP NO.

¼EDP NO.

5⁄16EDP NO.

3⁄8EDP NO.

7⁄16EDP NO.

½EDP NO.

1⁄8 .1250 250104 - - - - - - - $19.455⁄32 .1562 250105 - - - - - - - 15.803⁄16 .1875 250106 250306 - - - - - - 16.107⁄32 .2188 250107 250307 250407 - - - - - 18.25

¼ .2500 250108 250308 250408 - - - - - 18.259⁄32 .2812 250109 250309 250409 250509 - - - - 19.455⁄16 .3125 250110 250310 250410 250510 - - - - 19.453⁄8 .3750 - 250312 250412 250512 250612 - - - 21.45

7⁄16 .4375 - 250314 250414 250514 250614 250714 - - 21.95½ .5000 - - 250416 250516 250616 250716 250816 - 25.109⁄16 .5625 - - 250418 250518 250618 250718 250818 250918 32.855⁄8 .6250 - - 250420 250520 250620 250720 250820 250920 36.10

11⁄16 .6875 - - 250422 250522 250622 250722 250822 250922 36.95¾ .7500 - - 250424 250524 250624 250724 250824 250924 41.85

13⁄16 .8125 - - 250426 250526 250626 250726 250826 250926 47.057⁄8 .8750 - - 250428 250528 250628 250728 250828 250928 52.05

15⁄16 .9375 - - 250430 250530 250630 250730 250830 250930 54.901 1.0000 - - 250432 250532 250632 250732 250832 250932 56.801 1⁄16 1.0625 - - - - 250634 250734 250834 250934 58.901 1⁄8 1.1250 - - - - 250636 250736 250836 250936 70.95

SEMI-FINISHED CHUCKING REAMERS

& COUNTERBORE PILOTSBefore semi-Qnished reamers can be used, the cutting diameter must be Qnish ground and relieved. The reamer end must be faced and chamfered.

TYPE 2500 - CARBON STEEL PILOTSThe shank diameter ordered must be the same as thepilot shank hole diameter in the counterbore to be used.The pilot diameter is always larger than the shankdiameter and is determined by the part to be machined.

OPTIONS: Intermediate decimal or metric pilot diameters. Shank diameter tolerance plus .0000” minus .0005”.Pilot diameter tolerance:1⁄8” to ¼” minus .001” minus .002”.9⁄32” to 7⁄8” minus .003” minus .004”.15⁄16” to 1 1⁄8” minus .005” minus .006”.

MADE IN USA


MADE IN USA


TOOLDIAMETER

DIMENSIONS

TYPE2522

EDP NO.PRICE

SPECIALDECIMAL

SIZE RANGE


MINCUT

DIAM.

PILOTHOLEDIAM.

SMALLSHANKDIAM.

OVERALLLENGTH

1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14*

FRAC. DEC.

¼ .2500 .1250 .0938 ¼ 2 3⁄8 252208 $49.50 0.2381 - 0.2530 $84.15 $66.90 $61.05 $58.30 $55.35 $52.909⁄32 .2812 .1250 .0938 ¼ 2 3⁄8 252209 49.55 0.2531 - 0.2840 84.20 66.95 61.15 58.35 55.40 53.005⁄16 .3125 .1250 .0938 ¼ 2 3⁄8 252210 50.85 0.2841 - 0.3150 85.55 68.15 62.35 59.50 56.60 54.2511⁄32 .3438 .1250 .0938 ¼ 2 3⁄8 252211 51.85 0.3151 - 0.3470 86.55 69.15 63.40 60.55 57.65 55.30

3⁄8 .3750 .1250 .0938 ¼ 2 3⁄8 252212 52.00 0.3471 - 0.3780 86.65 69.30 63.60 60.70 57.75 55.4013⁄32 .4062 .1560 .1250 ¼ 2 ¾ 252213 59.15 0.3781 - 0.4090 93.70 76.50 70.65 67.85 64.85 62.557⁄16 .4375 .1560 .1250 ¼ 2 ¾ 252214 63.75 0.4091 - 0.4410 98.40 81.05 75.30 72.40 69.55 67.1515⁄32 .4688 .1560 .1250 ¼ 2 ¾ 252215 64.80 0.4411 - 0.4720 99.50 82.15 76.35 73.55 70.60 68.20

½ .5000 .1560 .1250 ¼ 2 ¾ 252216 65.60 0.4721 - 0.5030 100.30 82.95 77.15 74.25 71.35 68.9517⁄32 .5312 .1560 .1250 ¼ 2 ¾ 252217 65.95 0.5031 - 0.5340 100.55 83.20 77.50 74.60 71.65 69.309⁄16 .5625 .1560 .1250 ¼ 2 ¾ 252218 66.20 0.5341 - 0.5660 100.85 83.55 77.75 74.85 72.05 69.6019⁄32 .5938 .1560 .1250 ¼ 2 ¾ 252219 66.55 0.5661 - 0.5970 101.30 83.95 78.20 75.30 72.35 69.95

5⁄8 .6250 .1560 .1250 ¼ 2 ¾ 252220 67.30 0.5971 - 0.6280 101.95 84.70 78.85 76.10 73.15 70.7021⁄32 .6562 .2190 .1875 ¼ 2 ¾ 252221 74.80 0.6281 - 0.6590 109.45 92.10 86.40 83.55 80.60 78.2511⁄16 .6875 .2190 .1875 ¼ 2 ¾ 252222 78.55 0.6591 - 0.6910 113.20 95.90 90.10 87.25 84.25 81.9523⁄32 .7188 .2190 .1875 ¼ 2 ¾ 252223 81.20 0.6911 - 0.7220 115.80 98.55 92.70 89.95 86.95 84.65

¾ .7500 .2190 .1875 ¼ 2 ¾ 252224 82.20 0.7221 - 0.7530 116.85 99.55 93.70 90.95 88.05 85.6525⁄32 .7812 .2190 .1875 ¼ 2 ¾ 252225 82.55 0.7531 - 0.7840 117.25 99.90 94.15 91.20 88.35 85.9513⁄16 .8125 .2190 .1875 ¼ 2 ¾ 252226 83.25 0.7841 - 0.8160 118.05 100.60 94.85 92.00 89.10 86.7027⁄32 .8438 .2190 .1875 ¼ 2 ¾ 252227 83.90 0.8161 - 0.8470 118.55 101.10 95.40 92.55 89.60 87.25

7⁄8 .8750 .2190 .1875 ¼ 2 ¾ 252228 84.70 0.8471 - 0.8780 119.30 101.95 96.25 93.40 90.40 88.1029⁄32 .9062 .2190 .1875 ¼ 2 ¾ 252229 85.20 0.8781 - 0.9090 119.90 102.60 96.85 94.00 91.05 88.6515⁄16 .9375 .2190 .1875 ¼ 2 ¾ 252230 86.05 0.9091 - 0.9410 120.75 103.45 97.65 94.80 91.90 89.4531⁄32 .9688 .2190 .1875 ¼ 2 ¾ 252231 86.65 0.9411 - 0.9720 121.30 103.95 98.25 95.35 92.45 90.05

1 1.0000 .2190 .1875 ¼ 2 ¾ 252232 86.90 0.9721 - 1.0030 121.60 104.25 98.45 95.60 92.65 90.301 1⁄16 1.0625 .2190 .1875 3⁄8 2 ¾ 252234 110.95 1.0031 - 1.0660 145.55 128.20 122.50 119.60 116.65 114.301 1⁄8 1.1250 .2190 .1875 3⁄8 2 ¾ 252236 118.35 1.0661 - 1.1280 153.00 135.70 129.95 127.10 124.15 121.751 3⁄16 1.1875 .2190 .1875 3⁄8 2 ¾ 252238 119.85 1.1281 - 1.1905 154.50 137.20 131.45 128.60 125.65 123.30

1 ¼ 1.2500 .2810 .2500 3⁄8 2 ¾ 252240 122.10 1.1906 - 1.2530 156.85 139.45 133.60 130.80 127.95 125.551 5⁄16 1.3125 .2810 .2500 3⁄8 2 ¾ 252242 124.35 1.2531 - 1.3155 159.00 141.65 135.95 133.10 130.10 127.751 3⁄8 1.3750 .2810 .2500 3⁄8 2 ¾ 252244 125.80 1.3156 - 1.3780 160.50 143.25 137.45 134.50 131.65 129.201 7⁄16 1.4375 .2810 .2500 3⁄8 2 ¾ 252246 127.30 1.3781 - 1.4405 162.05 144.65 138.90 136.05 133.15 130.75

1 ½ 1.5000 .2810 .2500 3⁄8 2 ¾ 252248 134.05 1.4406 - 1.5030 169.95 152.00 146.00 143.05 139.95 137.551 9⁄16 1.5625 .3430 .3125 ½ 3 1⁄16 252250 149.10 1.5031 - 1.5660 185.00 167.10 161.10 158.15 155.15 152.701 5⁄8 1.6250 .3430 .3125 ½ 3 1⁄16 252252 151.05 1.5661 - 1.6280 187.00 169.05 163.15 160.15 157.10 154.551 11⁄16 1.6875 .3430 .3125 ½ 3 1⁄16 252254 153.05 1.6281 - 1.6910 189.00 171.05 165.05 162.15 159.10 156.60

1 ¾ 1.7500 .3430 .3125 ½ 3 1⁄16 252256 155.40 1.6911 - 1.7530 191.35 173.30 167.35 164.40 161.40 158.951 13⁄16 1.8125 .3430 .3125 ½ 3 1⁄16 252258 157.25 1.7531 - 1.8160 192.85 174.95 168.95 166.00 162.85 160.451 7⁄8 1.8750 .3430 .3125 ½ 3 1⁄16 252260 158.40 1.8161 - 1.8780 194.35 176.40 170.35 167.50 164.40 161.901 15⁄16 1.9375 .3430 .3125 ½ 3 1⁄16 252262 174.80 1.8781 - 1.9410 210.75 192.75 186.75 183.80 180.75 178.30

2 2.0000 .3430 .3125 ½ 3 1⁄16 252264 217.50 1.9411 - 2.0030 253.55 235.55 229.55 226.60 223.55 221.05

REDUCED SHANK COUNTERBORES CARBIDE TIPPED - STRAIGHT SHANK - INTERCHANGEABLE PILOT TYPE

TYPE 2522 - STRAIGHT SHANK3 >utes.Furnished with 1⁄64” corner radius.Carbide tips brazed to tough alloy steel body.Tool diameter tolerance: plus .001”, minus .000”.Shank diameter tolerance: plus .0000”, minus .001”.

USE:For counterboring and spotfacing non-ferrous materials, composites, and non-metals used in airframe manufacturing.

OPTIONS: ModiJed tool diameter - priced below. Metric tool diameter. Cutting diameter reduced for step. Corner chamfer or corner radius.


MADE IN USA


COUNTERBORES CARBIDE TIPPED - STRAIGHT SHANK - INTERCHANGEABLE PILOT TYPE

TOOLDIAMETER MIN

CUTDIAM.

PILOTHOLEDIAM.

OVER-ALL

LENGTH

SHANKDIAM.

TYPE 2512 TYPE 2514BOTHTYPESPRICE

SPECIALDECIMAL

SIZE RANGE


NO. OF

FLTS

EDP NO.

NO. OF

FLTS

EDP NO.

1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14*FRAC. DEC.

¼ .2500 .114 3⁄32 3 13⁄16 15⁄64 - - 3 251408 $61.35 0.2381 - 0.2530 $96.00 $78.70 $72.95 $70.05 $67.10 $64.759⁄32 .2812 .114 3⁄32 3 13⁄16 17⁄64 - - 3 251409 75.00 0.2531 - 0.2840 109.55 92.35 86.55 83.70 80.80 78.405⁄16 .3125 .114 3⁄32 3 13⁄16 19⁄64 - - 3 251410 68.15 0.2841 - 0.3150 102.75 85.50 79.70 76.85 73.95 71.5511⁄32 .3438 .114 3⁄32 3 13⁄16 5⁄16 - - 3 251411 86.30 0.3151 - 0.3470 120.85 103.50 97.75 94.90 92.00 89.55

3⁄8 .3750 .182 5⁄32 4 1⁄16 5⁄16 - - 3 251412 72.25 0.3471 - 0.3780 104.20 88.25 82.90 80.30 77.60 75.4013⁄32 .4062 .182 5⁄32 4 1⁄16 3⁄8 - - 3 251413 81.50 0.3781 - 0.4090 113.40 97.50 92.15 89.50 86.80 84.657⁄16 .4375 .182 5⁄32 4 1⁄16 3⁄8 - - 3 251414 74.15 0.4091 - 0.4410 106.05 90.10 84.75 82.20 79.45 77.2515⁄32 .4688 .228 3⁄16 4 5⁄16 7⁄16 - - 3 251415 90.50 0.4411 - 0.4720 122.45 106.50 101.20 98.60 95.80 93.65

½ .5000 .228 3⁄16 4 5⁄16 7⁄16 4 251216 3 251416 82.30 0.4721 - 0.5030 114.20 98.20 92.95 90.30 87.60 85.4517⁄32 .5312 .228 3⁄16 4 5⁄16 ½ 4 251217 3 251417 93.15 0.5031 - 0.5340 125.05 109.15 103.85 101.20 98.45 96.259⁄16 .5625 .228 3⁄16 4 5⁄16 ½ 4 251218 3 251418 84.70 0.5341 - 0.5660 116.65 100.65 95.35 92.70 90.05 87.8019⁄32 .5938 .228 3⁄16 5 1⁄8 ½ 4 251219 3 251419 94.15 0.5661 - 0.5970 126.00 110.10 104.80 102.15 99.40 97.20

5⁄8 .6250 .228 3⁄16 5 1⁄8 ½ 4 251220 3 251420 85.55 0.5971 - 0.6280 117.45 101.45 96.15 93.55 90.85 88.6521⁄32 .6562 .228 3⁄16 5 1⁄8 ½ 4 251221 3 251421 99.65 0.6281 - 0.6590 131.50 115.60 110.25 107.60 104.95 102.7511⁄16 .6875 .228 3⁄16 5 1⁄8 ½ 4 251222 3 251422 90.60 0.6591 - 0.6910 122.55 106.55 101.25 98.65 95.95 93.7023⁄32 .7188 .290 ¼ 5 3⁄8 ½ 4 251223 3 251423 102.00 0.6911 - 0.7220 133.80 117.90 112.60 110.05 107.25 105.10

¾ .7500 .290 ¼ 5 3⁄8 ½ 4 251224 3 251424 92.65 0.7221 - 0.7530 124.60 108.60 103.30 100.65 98.00 95.7525⁄32 .7812 .290 ¼ 5 3⁄8 5⁄8 4 251225 3 251425 104.15 0.7531 - 0.7840 136.00 120.05 114.75 112.15 109.40 107.2013⁄16 .8125 .290 ¼ 5 3⁄8 5⁄8 4 251226 3 251426 94.60 0.7841 - 0.8160 126.50 110.50 105.25 102.55 99.95 97.7527⁄32 .8438 .290 ¼ 5 3⁄8 ¾ 4 251227 3 251427 110.30 0.8161 - 0.8470 142.20 126.20 120.95 118.30 115.65 113.40

7⁄8 .8750 .290 ¼ 5 3⁄8 ¾ 4 251228 3 251428 100.30 0.8471 - 0.8780 132.20 116.25 110.95 108.30 105.60 103.4029⁄32 .9062 .290 ¼ 6 1⁄8 ¾ 4 251229 3 251429 112.50 0.8781 - 0.9090 144.50 128.45 123.15 120.60 117.85 115.7015⁄16 .9375 .290 ¼ 6 1⁄8 ¾ 4 251230 3 251430 102.35 0.9091 - 0.9410 134.30 118.30 113.00 110.35 107.65 105.4531⁄32 .9688 .353 5⁄16 6 3⁄8 ¾ 4 251231 3 251431 115.80 0.9411 - 0.9720 147.70 131.70 126.45 123.80 121.10 118.95

1 1.0000 .353 5⁄16 6 3⁄8 ¾ 4 251232 3 251432 105.30 0.9721 - 1.0030 137.20 121.20 115.90 113.30 110.60 108.401 1⁄16 1.0625 .353 5⁄16 6 3⁄8 ¾ 4 251234 3 251434 106.40 1.0031 - 1.0660 138.35 122.30 117.00 114.45 111.70 109.501 1⁄8 1.1250 .353 5⁄16 6 3⁄8 1 4 251236 3 251436 109.15 1.0661 - 1.1280 141.00 125.05 119.80 117.10 114.45 112.251 3⁄16 1.1875 .353 5⁄16 6 3⁄8 1 4 251238 3 251438 113.95 1.1281 - 1.1905 145.85 129.95 124.65 122.00 119.25 117.10

1 ¼ 1.2500 .426 3⁄8 6 5⁄8 1 - - 4 251440 126.95 1.1906 - 1.2530 161.50 144.25 138.45 135.65 132.65 130.351 5⁄16 1.3125 .426 3⁄8 6 5⁄8 1 - - 4 251442 137.00 1.2531 - 1.3155 171.65 154.35 148.50 145.70 142.80 140.401 3⁄8 1.3750 .426 3⁄8 6 5⁄8 1 - - 4 251444 144.15 1.3156 - 1.3780 178.70 161.40 155.60 152.75 149.85 147.451 7⁄16 1.4375 .426 3⁄8 7 7⁄8 1 ¼ - - 4 251446 158.00 1.3781 - 1.4405 195.55 176.75 170.45 167.35 164.25 161.60

1 ½ 1.5000 .426 3⁄8 7 7⁄8 1 ¼ - - 4 251448 182.65 1.4406 - 1.5030 221.65 202.10 195.65 192.50 189.15 186.451 9⁄16 1.5625 .489 7⁄16 8 1⁄8 1 ¼ - - 4 251450 188.00 1.5031 - 1.5660 227.10 207.50 201.00 197.80 194.55 191.851 5⁄8 1.6250 .489 7⁄16 8 1⁄8 1 ¼ - - 4 251452 191.95 1.5661 - 1.6280 231.00 211.50 205.05 201.80 198.50 195.851 11⁄16 1.6875 .489 7⁄16 8 1⁄8 1 ¼ - - 4 251454 229.70 1.6281 - 1.6910 271.75 250.75 243.70 240.20 236.65 233.75

1 ¾ 1.7500 .489 7⁄16 8 1⁄8 1 ¼ - - 4 251456 229.70 1.6911 - 1.7530 271.75 250.75 243.70 240.20 236.65 233.751 13⁄16 1.8125 .489 7⁄16 8 1⁄8 1 ½ - - 4 251458 271.90 1.7531 - 1.8160 314.05 293.00 285.95 282.50 278.85 276.051 7⁄8 1.8750 .489 7⁄16 8 1⁄8 1 ½ - - 4 251460 271.90 1.8161 - 1.8780 314.05 293.00 285.95 282.50 278.85 276.051 15⁄16 1.9375 .489 7⁄16 8 1⁄8 1 ½ - - 4 251462 297.15 1.8781 - 1.9410 339.35 318.30 311.20 307.70 304.15 301.30

2 2.0000 .551 ½ 8 3⁄8 1 ½ - - 4 251464 297.15 1.9411 - 2.0030 339.35 318.30 311.20 307.70 304.15 301.30


TYPE 2512 - FOUR FLUTES - STRAIGHT SHANK

TYPE 2514 - THREE/FOUR FLUTES - STRAIGHT SHANK

BOTH TYPES:For machining cast iron, non-ferrous materials, composites, plastics and non-metals.Right spiral polished >utes.Carbide tips brazed to hardened alloy steel bodies.Cutting diameter tolerance: plus .001”, minus .000”.Shank diameter tolerance: plus .0000”, minus .0005”.

OPTIONS:Intermediate decimal or metric diameters.Short shank or undersize diameter or >at on shank.Chamfers or radius end.Cutting diameter ground down for small step.Tanged shanks.

MADE IN USA


COUNTERBORES CARBIDE TIPPED - TAPER SHANK - INTERCHANGEABLE PILOT TYPE

TOOLDIAMETER MORSE

TAPER

MINCUT

DIAM.

PILOTHOLEDIAM.

OVER-ALL

LENGTH

TYPE 2518 TYPE 2516SPECIAL

DECIMALSIZE RANGE


NO. OF

FLTS

EDP NO.

NO. OF

FLTS

EDP NO.

BOTHTYPESPRICE


¼ .2500 1 .114 3⁄32 3 13⁄16 - - 3 251608 $74.45 0.2381 - 0.2530 $110.40 $92.45 $86.45 $83.50 $80.45 $78.009⁄32 .2812 1 .114 3⁄32 3 13⁄16 - - 3 251609 89.60 0.2531 - 0.2840 125.45 107.45 101.50 98.55 95.60 93.055⁄16 .3125 1 .114 3⁄32 3 13⁄16 - - 3 251610 81.50 0.2841 - 0.3150 117.35 99.40 93.45 90.50 87.45 85.0011⁄32 .3438 1 .114 3⁄32 3 13⁄16 - - 3 251611 100.40 0.3151 - 0.3470 136.30 118.30 112.30 109.40 106.35 103.90

3⁄8 .3750 1 .182 5⁄32 4 1⁄16 - - 3 251612 84.10 0.3471 - 0.3780 117.15 100.65 95.10 92.40 89.65 87.4013⁄32 .4062 1 .182 5⁄32 4 1⁄16 - - 3 251613 95.00 0.3781 - 0.4090 128.10 111.55 106.05 103.30 100.55 98.257⁄16 .4375 1 .182 5⁄32 4 1⁄16 - - 3 251614 86.40 0.4091 - 0.4410 119.40 102.90 97.35 94.70 91.90 89.6515⁄32 .4688 1 .228 3⁄16 4 5⁄16 - - 3 251615 104.90 0.4411 - 0.4720 137.95 121.40 115.90 113.20 110.40 108.15

½ .5000 1 .228 3⁄16 4 5⁄16 4 251816 3 251616 95.35 0.4721 - 0.5030 128.50 111.90 106.35 103.75 100.85 98.6017⁄32 .5312 1 .228 3⁄16 4 5⁄16 4 251817 3 251617 106.80 0.5031 - 0.5340 139.85 123.35 117.80 115.10 112.30 110.059⁄16 .5625 1 .228 3⁄16 4 5⁄16 4 251818 3 251618 97.15 0.5341 - 0.5660 130.25 113.65 108.20 105.40 102.70 100.4019⁄32 .5938 2 .228 3⁄16 5 1⁄8 4 251819 3 251619 109.70 0.5661 - 0.5970 142.85 126.30 120.80 118.05 115.30 112.95

5⁄8 .6250 2 .228 3⁄16 5 1⁄8 4 251820 3 251620 99.70 0.5971 - 0.6280 132.80 116.30 110.75 108.10 105.20 102.9521⁄32 .6562 2 .228 3⁄16 5 1⁄8 4 251821 3 251621 115.85 0.6281 - 0.6590 148.95 132.40 126.85 124.20 121.35 119.1011⁄16 .6875 2 .228 3⁄16 5 1⁄8 4 251822 3 251622 105.20 0.6591 - 0.6910 138.40 121.75 116.30 113.50 110.75 108.4523⁄32 .7188 2 .290 ¼ 5 3⁄8 4 251823 3 251623 117.75 0.6911 - 0.7220 150.85 134.30 128.80 126.10 123.30 121.05

¾ .7500 2 .290 ¼ 5 3⁄8 4 251824 3 251624 107.05 0.7221 - 0.7530 140.10 123.55 118.05 115.35 112.50 110.2025⁄32 .7812 2 .290 ¼ 5 3⁄8 4 251825 3 251625 119.75 0.7531 - 0.7840 152.80 136.30 130.75 128.00 125.25 123.0013⁄16 .8125 2 .290 ¼ 5 3⁄8 4 251826 3 251626 108.90 0.7841 - 0.8160 141.95 125.45 119.95 117.15 114.40 112.1527⁄32 .8438 2 .290 ¼ 5 3⁄8 4 251827 3 251627 125.90 0.8161 - 0.8470 159.05 142.50 137.00 134.25 131.50 129.20

7⁄8 .8750 2 .290 ¼ 5 3⁄8 4 251828 3 251628 114.45 0.8471 - 0.8780 147.55 130.95 125.50 122.75 120.00 117.7029⁄32 .9062 3 .290 ¼ 6 1⁄8 4 251829 3 251629 129.35 0.8781 - 0.9090 162.40 145.85 140.40 137.60 134.85 132.6015⁄16 .9375 3 .290 ¼ 6 1⁄8 4 251830 3 251630 117.60 0.9091 - 0.9410 150.65 134.10 128.60 125.85 123.15 120.8531⁄32 .9688 3 .353 5⁄16 6 3⁄8 4 251831 3 251631 132.35 0.9411 - 0.9720 165.40 148.90 143.40 140.65 137.80 135.50

1 1.0000 3 .353 5⁄16 6 3⁄8 4 251832 3 251632 124.85 0.9721 - 1.0030 159.20 142.05 136.30 133.50 130.50 128.201 1⁄16 1.0625 3 .353 5⁄16 6 3⁄8 4 251834 3 251634 126.50 1.0031 - 1.0660 160.75 143.60 137.90 135.10 132.15 129.801 1⁄8 1.1250 3 .353 5⁄16 6 3⁄8 4 251836 3 251636 130.45 1.0661 - 1.1280 164.85 147.75 141.90 139.10 136.20 133.851 3⁄16 1.1875 3 .353 5⁄16 6 3⁄8 4 251838 3 251638 134.90 1.1281 - 1.1905 169.35 152.15 146.35 143.55 140.65 138.30

1 ¼ 1.2500 3 .426 3⁄8 6 5⁄8 - - 4 251640 150.00 1.1906 - 1.2530 187.20 168.60 162.40 159.35 156.20 153.601 5⁄16 1.3125 3 .426 3⁄8 6 5⁄8 - - 4 251642 160.75 1.2531 - 1.3155 198.10 179.35 173.25 170.10 167.05 164.451 3⁄8 1.3750 3 .426 3⁄8 6 5⁄8 - - 4 251644 168.45 1.3156 - 1.3780 205.70 187.10 180.90 177.80 174.70 172.101 7⁄16 1.4375 4 .426 3⁄8 7 7⁄8 - - 4 251646 187.40 1.3781 - 1.4405 227.90 207.70 200.85 197.55 194.15 191.35

1 ½ 1.5000 4 .426 3⁄8 7 7⁄8 - - 4 251648 207.80 1.4406 - 1.5030 248.30 228.05 221.30 217.95 214.60 211.751 9⁄16 1.5625 4 .489 7⁄16 8 1⁄8 - - 4 251650 223.25 1.5031 - 1.5660 265.65 244.50 237.50 233.90 230.35 227.501 5⁄8 1.6250 4 .489 7⁄16 8 1⁄8 - - 4 251652 227.25 1.5661 - 1.6280 269.65 248.50 241.45 237.90 234.30 231.501 11⁄16 1.6875 4 .489 7⁄16 8 1⁄8 - - 4 251654 271.90 1.6281 - 1.6910 317.75 294.85 287.25 283.45 279.55 276.45

1 ¾ 1.7500 4 .489 7⁄16 8 1⁄8 - - 4 251656 271.90 1.6911 - 1.7530 317.75 294.85 287.25 283.45 279.55 276.451 13⁄16 1.8125 4 .489 7⁄16 8 1⁄8 - - 4 251658 321.85 1.7531 - 1.8160 367.60 344.75 337.10 333.30 329.45 326.251 7⁄8 1.8750 4 .489 7⁄16 8 1⁄8 - - 4 251660 321.85 1.8161 - 1.8780 367.60 344.75 337.10 333.30 329.45 326.251 15⁄16 1.9375 4 .489 7⁄16 8 1⁄8 - - 4 251662 351.60 1.8781 - 1.9410 397.45 374.55 366.85 363.15 359.30 356.10

2 2.0000 4 .551 ½ 8 3⁄8 - - 4 251664 351.60 1.9411 - 2.0030 397.45 374.55 366.85 363.15 359.30 356.10


TYPE 2518 - FOUR FLUTES - TAPER SHANK

TYPE 2516 - THREE/FOUR FLUTES - TAPER SHANK

BOTH TYPES:For machining cast iron, non-ferrous materials, composites, plastics and non-metals.Right spiral polished >utes.Carbide tips brazed to hardened alloy steel bodies.Cutting diameter tolerance: plus .001”, minus .000”.Shank diameter tolerance: plus .0000”, minus .0005”.

OPTIONS:Intermediate decimal or metric diameters.Chamfers or radius end.Cutting diameter ground down for small step.

MADE IN USA


COUNTERBORES CARBIDE TIPPED - STRAIGHT SHANK & TAPER SHANK -

INTERCHANGEABLE PILOT TYPE FOR STEEL

TOOLDIAMETER MIN

CUTDIAM.

PILOTHOLEDIAM.

OVER-ALL

LENGTH

SHANKDIAM.

NO.OF

FLTS

TYPE 2510STRAIGHT

SHANKEDP NO.

TYPE 2511TAPERSHANK

EDP NO.

MORSETAPER

BOTHTYPESPRICE

SPECIALDECIMAL

SIZE RANGE



¼ .2500 .114 3⁄32 3 13⁄16 15⁄64 3 251008 251108 1 $74.45 0.2381 - 0.2530 $110.40 $92.45 $86.45 $83.50 $80.45 $78.009⁄32 .2812 .114 3⁄32 3 13⁄16 17⁄64 3 251009 251109 1 89.60 0.2531 - 0.2840 125.45 107.45 101.50 98.55 95.60 93.055⁄16 .3125 .114 3⁄32 3 13⁄16 19⁄64 3 251010 251110 1 81.50 0.2841 - 0.3150 117.35 99.40 93.45 90.50 87.45 85.0011⁄32 .3438 .114 3⁄32 3 13⁄16 5⁄16 3 251011 251111 1 100.40 0.3151 - 0.3470 136.30 118.30 112.30 109.40 106.35 103.90

3⁄8 .3750 .182 5⁄32 4 1⁄16 5⁄16 3 251012 251112 1 84.10 0.3471 - 0.3780 117.15 100.65 95.10 92.40 89.65 87.4013⁄32 .4062 .182 5⁄32 4 1⁄16 3⁄8 3 251013 251113 1 95.00 0.3781 - 0.4090 128.10 111.55 106.05 103.30 100.55 98.257⁄16 .4375 .182 5⁄32 4 1⁄16 3⁄8 3 251014 251114 1 86.40 0.4091 - 0.4410 119.40 102.90 97.35 94.70 91.90 89.6515⁄32 .4688 .228 3⁄16 4 5⁄16 7⁄16 3 251015 251115 1 104.90 0.4411 - 0.4720 137.95 121.40 115.90 113.20 110.40 108.15

½ .5000 .228 3⁄16 4 5⁄16 7⁄16 3 251016 251116 1 95.35 0.4721 - 0.5030 128.50 111.90 106.35 103.75 100.85 98.6017⁄32 .5312 .228 3⁄16 4 5⁄16 ½ 3 251017 251117 1 102.95 0.5031 - 0.5340 134.80 118.90 113.55 110.95 108.25 106.059⁄16 .5625 .228 3⁄16 4 5⁄16 ½ 3 251018 251118 1 93.60 0.5341 - 0.5660 125.50 109.50 104.25 101.55 98.95 96.7019⁄32 .5938 .228 3⁄16 5 1⁄8 ½ 3 251019 251119 2 105.75 0.5661 - 0.5970 137.65 121.70 116.40 113.75 111.10 108.85

5⁄8 .6250 .228 3⁄16 5 1⁄8 ½ 3 251020 251120 2 96.10 0.5971 - 0.6280 128.00 112.10 106.75 104.15 101.40 99.2021⁄32 .6562 .228 3⁄16 5 1⁄8 ½ 3 251021 251121 2 111.60 0.6281 - 0.6590 143.50 127.55 122.20 119.65 116.90 114.7511⁄16 .6875 .228 3⁄16 5 1⁄8 ½ 3 251022 251122 2 101.40 0.6591 - 0.6910 133.35 117.35 112.10 109.40 106.75 104.5023⁄32 .7188 .290 ¼ 5 3⁄8 ½ 3 251023 251123 2 113.45 0.6911 - 0.7220 145.40 129.45 124.15 121.55 118.85 116.65

¾ .7500 .290 ¼ 5 3⁄8 ½ 3 251024 251124 2 103.15 0.7221 - 0.7530 135.00 119.05 113.75 111.15 108.40 106.2025⁄32 .7812 .290 ¼ 5 3⁄8 5⁄8 3 251025 251125 2 115.40 0.7531 - 0.7840 147.25 131.35 126.00 123.35 120.70 118.5013⁄16 .8125 .290 ¼ 5 3⁄8 5⁄8 3 251026 251126 2 104.95 0.7841 - 0.8160 136.80 120.90 115.60 112.90 110.25 108.0527⁄32 .8438 .290 ¼ 5 3⁄8 ¾ 3 251027 251127 2 121.30 0.8161 - 0.8470 153.30 137.30 132.00 129.35 126.70 124.50

7⁄8 .8750 .290 ¼ 5 3⁄8 ¾ 3 251028 251128 2 110.30 0.8471 - 0.8780 142.20 126.20 120.95 118.30 115.65 113.4029⁄32 .9062 .290 ¼ 6 1⁄8 ¾ 3 251029 251129 3 124.65 0.8781 - 0.9090 156.50 140.55 135.30 132.60 129.95 127.8015⁄16 .9375 .290 ¼ 6 1⁄8 ¾ 3 251030 251130 3 113.30 0.9091 - 0.9410 145.15 129.20 123.90 121.25 118.65 116.4531⁄32 .9688 .353 5⁄16 6 3⁄8 ¾ 3 251031 251131 3 127.50 0.9411 - 0.9720 159.35 143.45 138.15 135.50 132.75 130.60

1 1.0000 .353 5⁄16 6 3⁄8 ¾ 3 251032 251132 3 120.30 0.9721 - 1.0030 153.45 136.90 131.35 128.65 125.75 123.551 1⁄16 1.0625 .353 5⁄16 6 3⁄8 ¾ 3 251034 251134 3 121.90 1.0031 - 1.0660 154.90 138.40 132.85 130.15 127.35 125.101 1⁄8 1.1250 .353 5⁄16 6 3⁄8 1 3 251036 251136 3 125.70 1.0661 - 1.1280 158.85 142.35 136.75 134.05 131.25 129.001 3⁄16 1.1875 .353 5⁄16 6 3⁄8 1 3 251038 251138 3 130.00 1.1281 - 1.1905 163.20 146.60 141.05 138.35 135.50 133.30

1 ¼ 1.2500 .426 3⁄8 6 5⁄8 1 4 251040 251140 3 144.55 1.1906 - 1.2530 180.40 162.45 156.50 153.55 150.50 148.051 5⁄16 1.3125 .426 3⁄8 6 5⁄8 1 4 251042 251142 3 154.90 1.2531 - 1.3155 190.90 172.85 166.95 163.95 160.95 158.451 3⁄8 1.3750 .426 3⁄8 6 5⁄8 1 4 251044 251144 3 162.35 1.3156 - 1.3780 198.20 180.30 174.30 171.35 168.35 165.851 7⁄16 1.4375 .426 3⁄8 7 7⁄8 1 ¼ 4 251046 251146 4 180.55 1.3781 - 1.4405 219.65 200.15 193.55 190.40 187.10 184.40

1 ½ 1.5000 .426 3⁄8 7 7⁄8 1 ¼ 4 251048 251148 4 207.80 1.4406 - 1.5030 248.30 228.05 221.30 217.95 214.60 211.751 9⁄16 1.5625 .489 7⁄16 8 1⁄8 1 ¼ 4 251050 251150 4 223.25 1.5031 - 1.5660 265.65 244.50 237.50 233.90 230.35 227.501 5⁄8 1.6250 .489 7⁄16 8 1⁄8 1 ¼ 4 251052 251152 4 227.25 1.5661 - 1.6280 269.65 248.50 241.45 237.90 234.30 231.501 11⁄16 1.6875 .489 7⁄16 8 1⁄8 1 ¼ 4 251054 251154 4 271.90 1.6281 - 1.6910 317.75 294.85 287.25 283.45 279.55 276.45

1 ¾ 1.7500 .489 7⁄16 8 1⁄8 1 ¼ 4 251056 251156 4 271.90 1.6911 - 1.7530 317.75 294.85 287.25 283.45 279.55 276.451 13⁄16 1.8125 .489 7⁄16 8 1⁄8 1 ½ 4 251058 251158 4 321.85 1.7531 - 1.8160 367.60 344.75 337.10 333.30 329.45 326.251 7⁄8 1.8750 .489 7⁄16 8 1⁄8 1 ½ 4 251060 251160 4 321.85 1.8161 - 1.8780 367.60 344.75 337.10 333.30 329.45 326.251 15⁄16 1.9375 .489 7⁄16 8 1⁄8 1 ½ 4 251062 251162 4 351.60 1.8781 - 1.9410 397.45 374.55 366.85 363.15 359.30 356.10

2 2.0000 .551 ½ 8 3⁄8 1 ½ 4 251064 251164 4 351.60 1.9411 - 2.0030 397.45 374.55 366.85 363.15 359.30 356.10


TYPE 2510 - STRAIGHT SHANK FOR MACHINING STEELCarbide tips brazed to hardened alloy steel bodies. Right hand spiral polished >utes.Cutting diameter tolerance: plus .001” minus .000”.Shank diameter tolerance: plus .0000” minus .0005”.

TYPE 2511 - TAPER SHANK FOR MACHINING STEELSame as Type 2510 above but with taper shank.

OPTIONS: Intermediate decimal or metric diameters.Short shank or undersize diameter or >at on shank.Chamfers or radius end.Cutting diameter ground down for small step.Tanged shanks.

USE:The special steel cutting grade of carbide permitsthe heavy chip loads and speeds required formachining steel - appropriate primary andsecondary relief angles.

MADE IN USA


CAPSCREW COUNTERBORES CARBIDE TIPPED - STRAIGHT SHANK

TYPE 2513 - STRAIGHT SHANK - FOR NON-FERROUS & CAST IRON

TYPE 2515 - STRAIGHT SHANK - FOR STEEL Carbide tips brazed to hardened alloy steel bodies. Right spiral smooth >utes.Integral pilot type.Tools are designed with appropriate carbide grade and tool geometry for material being machined. The pilot is manufactured in nominal screw body diameters as well as 1⁄64” and 1⁄32” over size diameters.

OPTIONS:Intermediate decimal diameters.

TOOL DIAMETER PILOTDIAMETER

PILOTLENGTH

SHANKDIAMETER

OVERALLLENGTH

TYPE 2513 - NON-FERR/CIPRICE

TYPE 2515 - STEELPRICE

DECIMAL SCREW SIZE NO. OF FLTS. EDP NO. NO. OF FLTS. EDP NO.

.3820 ¼ .2500 .3125 5⁄16 5 5⁄8 3 25132500 $75.95 3 25152500 $83.55

.3980 ¼ .2650 .3125 5⁄16 5 5⁄8 3 25132650 84.40 3 25152650 92.85

.4140 ¼ .2810 .3125 5⁄16 5 5⁄8 3 25132810 84.40 3 25152810 92.85

.4750 5⁄16 .3125 .3750 3⁄8 6 1⁄8 3 25133125 84.95 3 25153125 93.50

.4910 5⁄16 .3280 .3750 3⁄8 6 1⁄8 3 25133280 84.95 3 25153280 93.50

.5070 5⁄16 .3430 .3750 3⁄8 6 1⁄8 3 25133430 84.95 3 25153430 93.50

.5720 3⁄8 .3750 .5000 ½ 6 ½ 3 25133750 95.80 3 25153750 105.40

.5880 3⁄8 .3900 .5000 ½ 6 ½ 3 25133900 95.80 3 25153900 105.40

.6040 3⁄8 .4060 .5000 ½ 6 ½ 3 25134060 95.80 3 25154060 105.40

.6630 7⁄16 .4375 .5000 ½ 7 3 25134375 92.55 3 25154375 101.80

.6790 7⁄16 .4530 .5000 ½ 7 3 25134530 92.55 3 25154530 101.80

.6950 7⁄16 .4680 .5000 ½ 7 3 25134680 92.55 3 25154680 101.80

.7570 ½ .5000 .5000 ½ 7 ½ 3 25135000 104.95 3 25155000 115.50

.7730 ½ .5150 .5000 ½ 7 ½ 3 25135150 104.95 3 25155150 115.50

.7890 ½ .5310 .5000 ½ 7 ½ 3 25135310 104.95 3 25155310 115.50

.8510 9⁄16 .5625 .5625 5⁄8 7 5⁄8 3 25135625 101.45 3 25155625 111.60

.8670 9⁄16 .5780 .5625 5⁄8 7 5⁄8 3 25135780 101.45 3 25155780 111.60

.8830 9⁄16 .5930 .5625 5⁄8 7 5⁄8 3 25135930 101.45 3 25155930 111.60

.9450 5⁄8 .6250 .6250 5⁄8 7 5⁄8 3 25136250 115.65 3 25156250 127.20

.9610 5⁄8 .6400 .6250 5⁄8 7 5⁄8 3 25136400 115.65 3 25156400 127.20

.9770 5⁄8 .6560 .6250 5⁄8 7 5⁄8 3 25136560 115.65 3 25156560 127.201.1330 ¾ .7500 .7500 ¾ 7 ¾ 3 25137500 114.00 3 25157500 125.401.1490 ¾ .7650 .7500 ¾ 7 ¾ 3 25137650 114.00 3 25157650 125.401.1650 ¾ .7810 .7500 ¾ 7 ¾ 3 25137810 114.00 3 25157810 125.40

1.3220 7⁄8 .8750 .8750 7⁄8 8 1⁄8 4 25138750 126.70 4 25158750 139.501.3380 7⁄8 .8910 .8750 7⁄8 8 1⁄8 4 25138910 126.70 4 25158910 139.501.3540 7⁄8 .9060 .8750 7⁄8 8 1⁄8 4 25139060 126.70 4 25159060 139.501.5100 1 1.0000 1.0000 1 8 ½ 4 25130000 145.10 4 25150000 159.65

1.5260 1 1.0150 1.0000 1 8 ½ 4 25130156 145.10 4 25150156 159.651.5420 1 1.0310 1.0000 1 8 ½ 4 25130313 145.10 4 25150313 159.65

TYPE 2513 - STRAIGHT SHANK - FOR NON-FERROUS & CAST IRON - METRIC

TYPE 2515 - STRAIGHT SHANK - FOR STEEL - METRICSame as above except metric sizes.

TOOL DIAMETER PILOTDIAMETER

PILOTLENGTH

SHANKDIAMETER

OVERALLLENGTH

TYPE 2513 - NON-FERR/CIPRICE

TYPE 2515 - STEELPRICE

DECIMAL SCREW SIZE MM NO. OF FLTS. EDP NO. NO. OF FLTS. EDP NO.

.3543 5 5.5 9⁄32 5⁄16 5 5⁄8 3 2513055 $84.15 3 2515055 $92.55

.4134 6 6.5 5⁄16 5⁄16 5 5⁄8 3 2513065 88.85 3 2515065 97.75

.5315 8 8.5 3⁄8 ½ 6 ½ 3 2513085 105.50 3 2515085 116.00

.6496 10 10.5 ½ ½ 7 3 2513105 114.75 3 2515105 126.25

.7283 12 12.5 ½ ½ 7 ½ 3 2513125 107.70 3 2515125 118.40

.8465 14 14.5 9⁄16 5⁄8 7 5⁄8 3 2513145 125.55 3 2515145 138.05

.9646 16 16.5 5⁄8 5⁄8 7 5⁄8 3 2513165 131.20 3 2515165 144.301.2008 20 20.5 ¾ 7⁄8 8 3 2513205 121.65 3 2515205 133.80

TUBE DIMENSIONSTYPE 2792

N-F/CIEDP NO.

TYPE 2793STEEL

EDP NO.

BOTHTYPESPRICENO. SIZE

THREADSIZE

DIAMETER LENGTH

REAMER SPOTFACE SHANK SHANK REAMER HEAD OVERALL

1 1⁄16 ¼-28 .2150 .6500 .5000 2 .4070 1 3 279201 279301 $328.652 1⁄8 5⁄16-24 .2750 .7420 .5000 2 .5820 1 1⁄8 3 1⁄8 279202 279302 328.653 3⁄16 3⁄8-24 .3390 .8050 .5000 2 .5880 1 ¼ 3 ¼ 279203 279303 311.804 ¼ 7⁄16-20 .3930 .8880 .5000 2 .6610 1 ¼ 3 ¼ 279204 279304 320.25

5 5⁄16 ½-20 .4550 .9500 .5000 2 .6610 1 ¼ 3 ¼ 279205 279305 328.656 3⁄8 9⁄16-18 .5120 1.0120 .5000 2 .7140 1 ½ 3 ½ 279206 279306 345.507 7⁄16 5⁄8-18 .5750 1.1050 .5000 2 .7300 1 ½ 3 ½ 279207 279307 353.958 ½ ¾-16 .6930 1.2400 .7500 2 .8390 1 5⁄8 3 5⁄8 279208 279308 362.35

9 9⁄16 13⁄16-16 .7560 1.3020 .7500 2 .8550 1 5⁄8 3 5⁄8 279209 279309 370.8010 5⁄8 7⁄8-14 .8100 1.4150 .7500 2 ¼ .9350 1 7⁄8 4 1⁄8 279210 279310 379.2011 11⁄16 1-12 .9250 1.6020 .7500 2 ¼ 1.0690 2 1⁄8 4 3⁄8 279211 279311 412.9012 ¾ 1 1⁄16-12 .9870 1.6650 .7500 2 ¼ 1.0690 2 1⁄8 4 3⁄8 279212 279312 438.20

14 7⁄8 1 3⁄16-12 1.1120 1.7900 .7500 2 ¼ 1.0690 2 1⁄8 4 3⁄8 279214 279314 500.6016 1 1 5⁄16-12 1.2370 1.9650 .7500 2 ¼ 1.0690 2 1⁄8 4 3⁄8 279216 279316 562.0518 1 1⁄8 1 ½-12 1.4250 2.0900 .7500 2 ¼ 1.1210 2 ¼ 4 ½ 279218 279318 605.7520 1 ¼ 1 5⁄8-12 1.5500 2.3100 1.0000 2 ¼ 1.1210 2 ¼ 4 ½ 279220 279320 705.75

24 1 ½ 1 7⁄8-12 1.8000 2.6000 1.0000 2 ¼ 1.1320 2 ¼ 4 ½ 279224 279324 854.5032 2 2 ½-12 2.4250 3.5200 1.0000 2 ½ 1.3730 2 ½ 5 279232 279332 1215.20

MS 33649 INTEGRAL REAMER PILOT

STRAIGHT SHANK - TWO TYPES:

TYPE 2792 - FOR NON-FERROUS AND CAST IRON

TYPE 2793 - FOR STEELNOTE: For use & option information, see above.

MADE IN USA


PORT CONTOUR CUTTERS CARBIDE TIPPED

S.A.E. PORTS - MS16142 • J514F • J1926

STRAIGHT SHANK - TWO TYPES:

TYPE 2780 - FOR NON-FERROUS AND CAST IRON

TYPE 2781 - FOR STEEL5° axial rake.Negative radial rake.Heat treated bodies.All tolerances within military specs.

USE:In a single operation, a port contourcutter can produce the form and Jnishrequired on internal straight thread o-ringports.

OPTIONS:Reamer diameter. Whistle notch.Spotface diameter. Tang.Reamer length. Shank length.Shank style. Metric tool diameter.Port ID groove. Weldon >ats.

TUBE DIMENSIONSTYPE 2780

N-F/CIEDP NO.

TYPE 2781STEEL

EDP NO.

BOTHTYPESPRICENO. SIZE

THREADSIZE

DIAMETER SEALINGSEAT

ANGLE

LENGTH

REAMER SPOTFACE SHANK SHANK REAMER HEAD OVERALL

2 1⁄8 5⁄16-24 .2720 .6820 .5000 12° 2 .4730 1 1⁄8 3 1⁄8 278002 278102 $281.403 3⁄16 3⁄8-24 .3350 .7600 .5000 12° 2 .4730 1 ¼ 3 ¼ 278003 278103 281.404 ¼ 7⁄16-20 .3890 .8380 .5000 12° 2 .5520 1 ¼ 3 ¼ 278004 278104 281.405 5⁄16 ½-20 .4520 .9160 .5000 12° 2 .5520 1 ¼ 3 ¼ 278005 278105 290.25

6 3⁄8 9⁄16-18 .5090 .9790 .5000 12° 2 .6140 1 ¼ 3 ¼ 278006 278106 290.258 ½ ¾-16 .6890 1.1980 .7500 15° 2 .6930 1 3⁄8 3 3⁄8 278008 278108 317.65

10 5⁄8 7⁄8-14 .8060 1.3540 .7500 15° 2 .7860 1 5⁄8 3 5⁄8 278010 278110 359.2512 ¾ 1 1⁄16-12 .9810 1.6350 .7500 15° 2 ¼ .9110 1 7⁄8 4 1⁄8 278012 278112 387.55

14 7⁄8 1 3⁄16-12 1.1060 1.7750 .7500 15° 2 ¼ .9110 1 7⁄8 4 1⁄8 278014 278114 393.8016 1 1 5⁄16-12 1.2310 1.9200 .7500 15° 2 ¼ .9110 1 7⁄8 4 1⁄8 278016 278116 423.8520 1 ¼ 1 5⁄8-12 1.5440 2.2800 1.0000 15° 2 ¼ .9110 2 4 ¼ 278020 278120 466.9524 1 ½ 1 7⁄8-12 1.7940 2.5700 1.0000 15° 2 ¼ .9110 2 4 ¼ 278024 278124 574.25

32 2 2 ½-12 2.4190 3.4900 1.0000 15° 2 ¼ .9110 2 ¼ 4 ½ 278032 278132 749.95

MADE IN USA


TOOLDIAM.

ARBOR HOLE

OVERALLLENGTH

DRIVE SLOTS TYPE 2530 FOR NON-FERROUS TYPE 2531 FOR CAST IRON TYPE 2532 FOR STEEL

WIDTH DEPTHNO. OF TEETH

EDPNO.

PRICENO. OFTEETH

EDPNO.

PRICENO. OFTEETH

EDPNO.

PRICE

1 ¼ ½ 1 ¼ 5⁄32 4 253024 $171.60 4 253124 $171.60 4 253224 $178.501 ½ ½ 1 1⁄8 ¼ 5⁄32 4 253026 178.70 4 253126 178.70 4 253226 185.851 ¾ ¾ 1 ¼ 5⁄16 3⁄16 4 253028 222.70 4 253128 222.70 4 253228 231.552 ¾ 1 3⁄8 5⁄16 3⁄16 4 253032 233.85 4 253132 248.80 4 253232 258.70

2 ¼ 1 1 ½ 3⁄8 7⁄32 6 253036 247.05 6 253136 269.35 6 253236 280.152 ½ 1 1 5⁄8 3⁄8 7⁄32 6 253040 260.10 6 253140 293.60 6 253240 293.602 ¾ 1 1 5⁄8 3⁄8 7⁄32 6 253044 274.50 6 253144 308.00 6 253244 308.003 1 ¼ 1 ¾ ½ 9⁄32 6 253048 300.90 6 253148 335.00 6 253248 335.00

3 ½ 1 ¼ 1 7⁄8 ½ 9⁄32 6 253056 368.30 8 253156 394.00 6 253256 416.454 1 ½ 2 ¼ 5⁄8 3⁄8 6 253064 462.80 8 253164 487.40 6 253264 517.30

SHELL END MILLSTYPE 2530 - FOR NON-FERROUS MACHININGFor production machining of most non-ferrous materials.Large open >utes for easy chip disposal.Right hand spiral.

TYPE 2531 - FOR CAST IRON MACHININGFor production machining of cast iron and malleable iron.Open >utes for easy chip disposal.

TYPE 2532 - FOR STEEL MACHININGFor production machining of steel.Steel cutting grade of carbide permits high chip loads.Left-hand spiral absorbs the impact shock on entering steel.

OPTIONS:Intermediate decimalcutting diameter.Cutting diameter steps.Radius corners.Chamfer corners.

ALL TYPES:Carbide tips brazed to alloy steel bodies.Cutting diameter tolerance plus 1/16” minus .000”.Arbor hole tolerance plus .001” minus .000”.

TYPE 2350 -

15° RIGHT SPIRAL FLUTESFor milling all types of steel. The right spiral >utes permitfast chip removal and reduces cutting pressures.The constant spiral >utes distributes the impact loadmore evenly throughout the tool revolution andthus improves tool life while permitting faster cuttingwith smoother Jnishes.Flute long, steel cutting grade carbide tips brazed tohardened alloy steel bodies.Cutting diameter NC tolerance plus .002” minus .000”.Straight shank with drive >ats.

OPTIONS:Intermediate decimal cutting diameters.Radius end.End chamfer.Undersize shank diameter.

TOOLDIAM.

SHANKDIAMETER

LENGTH TYPE 2350 15° RIGHT SPIRAL

CARBIDE OVERALLNO. OFFLUTES

EDPNO.

PRICE

½ 3⁄8 1 3 4 235016 $86.40½ ½ 1 3 4 235017 86.409⁄16 ½ 1 3 4 235018 92.805⁄8 ½ 1 ¼ 3 ¼ 4 235020 99.90

5⁄8 5⁄8 1 ¼ 3 3⁄8 4 235021 99.9011⁄16 ½ 1 ¼ 3 ¼ 4 235022 104.1011⁄16 5⁄8 1 ¼ 3 3⁄8 4 235023 104.10¾ ½ 1 ¼ 3 ¼ 4 235024 111.15

¾ 5⁄8 1 ¼ 3 3⁄8 4 235025 111.1513⁄16 5⁄8 1 ½ 3 5⁄8 4 235026 119.907⁄8 5⁄8 1 ½ 3 5⁄8 4 235028 127.257⁄8 7⁄8 1 ½ 3 ¾ 4 235029 127.25

TOOLDIAM.

SHANKDIAMETER

LENGTH TYPE 2350 15° RIGHT SPIRAL

CARBIDE OVERALLNO. OFFLUTES

EDPNO.

PRICE

15⁄16 5⁄8 1 ½ 3 ¾ 4 235030 $188.5015⁄16 7⁄8 1 ½ 3 ¾ 4 235031 188.50

1 7⁄8 1 ½ 3 ¾ 6 235032 178.501 1 1 ½ 4 6 235033 178.50

1 1⁄8 1 1 ¾ 4 ¼ 6 235036 210.101 ¼ 1 1 ¾ 4 ¼ 6 235040 240.801 3⁄8 1 1 ¾ 4 ¼ 6 235044 281.301 ½ 1 ¼ 2 4 ½ 6 235048 277.10

1 5⁄8 1 ¼ 2 4 ½ 8 235052 369.401 ¾ 1 ¼ 2 4 ½ 8 235056 393.951 7⁄8 1 ¼ 2 4 ½ 8 235060 421.302 1 ¼ 2 4 ½ 8 235064 444.95

SHELL END MILLSHIGH SPIRAL END MILLS

CARBIDE TIPPED

MADE IN USA


HIGH SPIRAL END MILLSCARBIDE TIPPED

FOR MILLING CAST IRON, NON-FERROUS METALS, NON-METALS

TYPE 2325 - 25° RIGHT SPIRAL FLUTESFor milling all non-ferrous metals and non-metals.The high spiral >utes permit fast chip removal somaximum feeds and speeds can be used. The constantspiral >ute distributes the impact load more evenlythroughout the tool’s revolution and thus improves toollife while permitting faster cutting with smootherJnishes.

BOTH TYPES:Flute long carbide tips brazed to hardened alloy steelbodies.Cutting diameter NC tolerance plus .002” minus .000”.Straight shanks with drive >ats.

TYPE 2375 - 15° RIGHT SPIRAL FLUTESFor milling cast iron and malleable iron. The 15° spiral>utes permit fast chip removal so maximum feeds andspeeds can be used. The constant spiral >ute distributesthe impact load more evenly throughout the tool’srevolution and thus improves tool life while permitting faster cutting with smoother Jnishes.


TOOLDIAM.

SHANKDIAMETER

LENGTH TYPE 2325 25° RIGHT SPIRAL TYPE 2375 15° RIGHT SPIRAL

CARBIDE OVERALLNUMBER

OF FLUTESEDPNO.

PRICENUMBER

OF FLUTESEDPNO.

PRICE

½ 3⁄8 1 3 2 232516 $86.40 2 237516 $79.60½ ½ 1 3 2 232517 86.40 2 237517 79.609⁄16 ½ 1 3 2 232518 92.80 2 237518 85.605⁄8 ½ 1 ¼ 3 ¼ 2 232520 99.90 2 237520 92.00

5⁄8 5⁄8 1 ¼ 3 3⁄8 2 232521 99.90 2 237521 92.0011⁄16 ½ 1 ¼ 3 ¼ 2 232522 104.10 2 237522 95.9011⁄16 5⁄8 1 ¼ 3 3⁄8 2 232523 104.10 2 237523 95.90¾ ½ 1 ¼ 3 ¼ 2 232524 111.15 2 237524 102.40

¾ 5⁄8 1 ¼ 3 3⁄8 2 232525 111.15 2 237525 102.4013⁄16 5⁄8 1 ½ 3 5⁄8 2 232526 119.90 2 237526 110.507⁄8 5⁄8 1 ½ 3 5⁄8 2 232528 127.25 2 237528 117.357⁄8 7⁄8 1 ½ 3 ¾ 2 232529 127.25 2 237529 117.35

15⁄16 5⁄8 1 ½ 3 ¾ 2 232530 143.95 3 237530 173.7015⁄16 7⁄8 1 ½ 3 ¾ 2 232531 143.95 3 237531 173.70

1 7⁄8 1 ½ 3 ¾ 2 232532 146.95 3 237532 164.451 1 1 ½ 4 2 232533 146.95 3 237533 164.45

1 1⁄8 1 1 ¾ 4 ¼ 2 232536 160.90 3 237536 193.651 ¼ 1 1 ¾ 4 ¼ 3 232540 213.45 4 237540 221.901 3⁄8 1 1 ¾ 4 ¼ 3 232544 231.40 4 237544 259.151 ½ 1 ¼ 2 4 ½ 3 232548 258.45 4 237548 255.35

1 5⁄8 1 ¼ 2 4 ½ 3 232552 305.90 4 237552 312.301 ¾ 1 ¼ 2 4 ½ 3 232556 328.20 4 237556 333.001 7⁄8 1 ¼ 2 4 ½ 3 232560 353.30 4 237560 356.202 1 ¼ 2 4 ½ 3 232564 377.70 4 237564 376.25

MADE IN USA


END MILLSCARBIDE TIPPED - FOR MILLING STEEL & TOUGH STEEL ALLOYS

TYPE 2300 -

TWO STRAIGHT FLUTESMaximum chip room for easier chipremoval. Also used when machinehorsepower is too low for highercapacity end mills.

ALL TYPES:Steel cutting grade >ute long carbide tips brazed tohardened alloy steel bodies.Cutting diameter NC tolerance plus .002” minus .000”.Straight shanks with drive >ats.

USE:For milling steels and tough steel alloys as indicated.Special steel cutting grade of carbide permits the higherchip loads and higher speeds required for milling steel.

TYPE 2308 -

6° RIGHT SPIRAL FLUTESThe right spiral >utes greater capacityto remove chips permits heavierfeeds and faster speeds, especiallywhen machining free-cutting steels.

TYPE 2310 -

6° LEFT SPIRAL FLUTESThe left spiral >utes maintain aconstant pressure on the work pieceand better absorb the impact shockon entering steel. For milling all typesof steel, including hardened steel andother tough steel alloys.


TOOLDIAM.

SHANKDIAMETER

LENGTH TYPE 2300 STRAIGHT FLUTES TYPE 2308 RIGHT SPIRAL TYPE 2310 LEFT SPIRAL


OF FLUTESEDPNO.

PRICENUMBER

OF FLUTESEDPNO.

PRICENUMBER

OF FLUTESEDPNO.

PRICE

¼ 3⁄8 ½ 2 ½ 2 230008 $54.30 2 230808 $55.90 2 231008 $55.905⁄16 3⁄8 5⁄8 2 ½ 2 230010 56.55 2 230810 60.30 2 231010 60.303⁄8 3⁄8 5⁄8 2 ½ 2 230012 60.40 2 230812 63.90 2 231012 63.907⁄16 3⁄8 1 2 11⁄16 2 230014 60.40 2 230814 63.90 2 231014 63.90

½ ½ 1 3 ¼ 2 230016 61.80 4 230816 68.85 4 231016 68.859⁄16 ½ 1 3 3⁄8 2 230018 68.50 4 230818 74.00 4 231018 74.005⁄8 ½ 1 3 3⁄8 2 230020 68.50 4 230820 91.30 4 231020 91.30¾ 5⁄8 1 3 5⁄8 2 230024 76.90 4 230824 101.75 4 231024 101.75

7⁄8 5⁄8 1 ¼ 4 2 230028 90.85 4 230828 122.55 4 231028 122.551 7⁄8 1 ¼ 4 2 230032 100.45 6 230832 140.90 6 231032 140.901 1⁄8 1 1 ¼ 4 ¼ 2 230036 102.85 6 230836 149.45 6 231036 149.451 ¼ 1 1 ¼ 4 ¼ 2 230040 114.70 6 230840 180.60 6 231040 180.60

1 ½ 1 ¼ 1 ½ 4 ½ 2 230048 147.75 6 230848 219.65 6 231048 219.651 ¾ 1 ¼ 1 ½ 4 ½ 2 230056 165.70 8 230856 264.50 8 231056 264.502 1 ¼ 1 ½ 4 ½ 2 230064 197.85 8 230864 295.30 8 231064 295.30

MADE IN USA


END MILLSCARBIDE TIPPED

FOR MILLING CAST IRON, NON-FERROUS & NON-METALS

TYPE 2302 -

TWO STRAIGHT FLUTESMaximum chip room for easier chipremoval. Also used when machinehorsepower is too low for highercapacity end mills.

ALL TYPES:Flute long carbide tips brazed to hardened alloy steelbodies.Cutting diameter NC tolerance plus .002” minus .000”.Straight shanks with drive >ats.

USE:For milling cast iron, non-ferrous metals and non-metalsbut excluding steel.

TYPE 2304 -

STRAIGHT FLUTESWhere the machine horsepower permitsa higher capacity end mill - feeds lessthan .002” per >ute per revolution mayresult in fast dulling of cutting edges.

TYPE 2306 -

6° RIGHT SPIRAL FLUTESThe spiral >utes capacity to re-move chips permits heavier feedsand faster speeds, especially onfree cutting zinc and aluminum.


TOOLDIAM.

SHANKDIAMETER

LENGTH TYPE 2302 TWO FLUTES TYPE 2304 FOUR FLUTES TYPE 2306 RIGHT SPIRAL


OF FLUTESEDPNO.

PRICENUMBER

OF FLUTESEDPNO.

PRICENUMBER

OF FLUTESEDPNO.

PRICE

¼ 3⁄8 ½ 2 ½ 2 230208 $47.25 4 230408 $47.70 2 230608 $48.305⁄16 3⁄8 5⁄8 2 ½ 2 230210 49.05 4 230410 50.95 2 230610 50.053⁄8 3⁄8 5⁄8 2 ½ 2 230212 52.60 4 230412 53.70 2 230612 53.557⁄16 3⁄8 1 2 11⁄16 2 230214 52.60 4 230414 53.70 2 230614 53.55

½ ½ 1 3 ¼ 2 230216 53.90 4 230416 54.95 2 230616 55.009⁄16 ½ 1 3 3⁄8 2 230218 59.60 4 230418 61.70 2 230618 60.905⁄8 ½ 1 3 3⁄8 2 230220 59.60 4 230420 64.60 4 230620 63.25

11⁄16 5⁄8 1 3 3⁄8 2 230222 64.50 4 230422 71.15 - - -

¾ 5⁄8 1 3 5⁄8 2 230224 66.95 4 230424 66.50 4 230624 72.2513⁄16 5⁄8 1 3 5⁄8 2 230226 80.90 4 230426 78.55 - - -

7⁄8 5⁄8 1 ¼ 4 2 230228 81.45 4 230428 78.55 4 230628 96.6015⁄16 7⁄8 1 ¼ 4 2 230230 87.20 4 230430 87.25 - - -

1 7⁄8 1 ¼ 4 2 230232 87.45 4 230432 90.80 4 230632 111.60

1 1⁄8 1 1 ¼ 4 ¼ 2 230236 89.75 4 230436 102.95 4 230636 126.551 ¼ 1 1 ¼ 4 ¼ 2 230240 108.20 4 230440 115.80 4 230640 142.251 ½ 1 ¼ 1 ½ 4 ½ 2 230248 134.00 4 230448 149.25 4 230648 176.10

1 ¾ 1 ¼ 1 ½ 4 ½ 2 230256 158.85 6 230456 192.40 6 230656 227.302 1 ¼ 1 ½ 4 ½ 2 230264 177.20 6 230464 221.65 6 230664 261.75

MADE IN USA


TYPE 2312

FOR MILLING STEELThree straight >utes.One >ute is center cutting.Steel cutting grade carbide.

CORNER ROUNDING END MILLS CENTER CUTTING END MILLS

CARBIDE TIPPED

TYPE 2318

FOR MILLING NON-FERROUS

MATERIALSTwo 25° right spiral shear cutting >utes.One >ute is center cutting. Large >ute capacity for heavy milling of non- ferrous material.

TYPE 2314

FOR MILLING CAST IRONThree straight >utes.One >ute is center cutting.General purpose carbide.

ALL TYPES:Carbide tips brazed to hardened alloy steel bodies.Cutting diameter NC tolerance plus .002” minus .000”.

USE:For plunge and side cut milling at moderate feeds andspeeds. Extremely versatile and economical for machining splines, keyways, spot facing or regular peripheral milling.

TOOLDIAM.

SHANKDIAM.

NUMBEROF

FLUTES

LENGTH TYPE 2318 - RIGHT SPIRAL

CARBIDE OVERALLEDP NO.

PRICE

½ ½ 2 1 3 231816 $139.305⁄8 5⁄8 2 1 ¼ 3 3⁄8 231820 155.70¾ ¾ 2 1 ¼ 3 3⁄8 231824 165.007⁄8 7⁄8 2 1 ½ 3 ¾ 231828 181.45

1 1 2 1 ½ 4 231832 208.551 ¼ 1 ¼ 2 1 ¾ 4 ¼ 231840 283.451 ½ 1 ½ 2 2 4 ¾ 231848 330.75

OPTIONS:Radius end.End chamfer.

TOOLDIAM.

SHANKDIAM.

NUMBEROF

FLUTES

LENGTHTYPE 2312

EDP NO.TYPE 2314

EDP NO.

BOTHTYPESPRICECARBIDE OVERALL

3⁄8 3⁄8 3 ½ 2 ½ 231212 231412 $86.607⁄16 3⁄8 3 ¾ 2 ½ 231214 231414 88.50½ ½ 3 ¾ 3 231216 231416 90.65

9⁄16 ½ 3 ¾ 3 231218 231418 94.305⁄8 5⁄8 3 ¾ 3 ¼ 231220 231420 110.25¾ 5⁄8 3 ¾ 3 3⁄8 231224 231424 115.45

7⁄8 7⁄8 3 ¾ 3 ¾ 231228 231428 134.801 7⁄8 3 ¾ 3 ¾ 231232 231432 148.051 1⁄8 1 3 ¾ 4 231236 231436 158.50

1 ¼ 1 3 ¾ 4 231240 231440 183.801 ½ 1 ¼ 3 ¾ 4 231248 231448 218.45

TYPE 2740 - CORNER ROUNDING END MILLS

FOR NON-FERROUS AND CAST IRON

TYPE 2741 - CORNER ROUNDING END MILLS FOR STEELAll sizes have three >utes and are used to mill round corners on square edges.

CIRCLERADIUS

TOOLDIAM.

ENDDIAM.

SHANKDIAM.

LENGTH TYPE 2740CAST IRON

EDP NO.PRICE

TYPE 2741STEEL

EDP NO.PRICE

CARBIDE OVERALL

1⁄16 7⁄16 17⁄64 3⁄8 13⁄32 2 ¾ 274002 $111.50 274102 $120.503⁄32 ½ 17⁄64 3⁄8 13⁄32 2 ¾ 274003 111.50 274103 120.501⁄8 5⁄8 19⁄64 ½ 13⁄32 3 274004 115.45 274104 124.605⁄32 ¾ 23⁄64 ½ 13⁄32 3 274005 122.45 274105 132.20

3⁄16 7⁄8 13⁄32 ¾ 13⁄32 3 ¼ 274006 129.55 274106 139.85¼ 1 13⁄32 ¾ 15⁄32 3 ¼ 274008 147.65 274108 159.405⁄16 1 1⁄8 13⁄32 7⁄8 19⁄32 3 ½ 274010 151.65 274110 163.803⁄8 1 ¼ 13⁄32 7⁄8 25⁄32 3 ¾ 274012 157.55 274112 170.20

7⁄16 1 3⁄8 13⁄32 1 7⁄8 4 274014 175.45 274114 189.50½ 1 ½ 13⁄32 1 1 4 274016 195.25 274116 210.955⁄8 2 21⁄32 1 ¼ 1 7⁄32 4 ¼ 274020 240.30 274120 259.55

MADE IN USA


TOOLDIAM.

SHANKDIAM.

NO. OFTEETH

60° INCLUDED ANGLE 90° INCLUDED ANGLE

OVERALLLENGTH

CUTTERWIDTH

TYPE 2746EDP NO.

PRICETYPE 2747

EDP NO.PRICE

OVERALLLENGTH

CUTTERWIDTH

TYPE 2748EDP NO.

PRICETYPE 2749

EDP NO.PRICE

¾ 3⁄8 6 2 3⁄8 3⁄16 274624 $132.50 274724 $145.80 2 3⁄8 ¼ 274824 $132.50 274924 $145.801 ½ 6 2 27⁄32 5⁄16 274632 156.50 274732 172.20 2 29⁄32 3⁄8 274832 156.50 274932 172.201 3⁄8 5⁄8 6 3 7⁄32 7⁄16 274644 181.30 274744 199.50 3 9⁄32 ½ 274844 181.30 274944 199.501 ½ 5⁄8 6 3 3⁄8 ½ 274648 190.45 274748 209.45 3 7⁄16 9⁄16 274848 190.45 274948 209.45

1 7⁄8 ¾ 6 3 25⁄32 5⁄8 274660 289.15 274760 318.10 3 25⁄32 5⁄8 274860 289.15 274960 318.102 ¼ 7⁄8 6 4 5⁄32 ¾ 274672 391.40 274772 430.50 4 5⁄32 ¾ 274872 391.40 274972 430.50

TOOLDIAM.

SHANKDIAM.

MIN.CUTTING

DIAM.

EDP NO. PRICEALL

TYPESTYPE 256160° ANGLE

TYPE 258182° ANGLE

TYPE 259190° ANGLE

TYPE 2584100° ANGLE

¼ 3⁄16 1⁄16 256108 258108 259108 258408 $48.903⁄8 ¼ 5⁄64 256112 258112 259112 258412 48.90½ 3⁄8 3⁄32 256116 258116 259116 258416 58.05¾ ½ 1⁄8 256124 258124 259124 258424 72.60

1 ½ 1⁄8 256132 258132 259132 258432 94.801 ¼ ½ 5⁄32 256140 258140 259140 258440 120.651 ½ ½ 3⁄16 256148 258148 259148 258448 135.30

TOOLDIAM.

SHANKDIAM.

MIN.CUTTING

DIAM.

EDP NO. PRICEALL

TYPESTYPE 256360° ANGLE

TYPE 258382° ANGLE

TYPE 259090° ANGLE

TYPE 2585100° ANGLE

¼ 3⁄16 5⁄64 256308 258308 259008 258508 $53.753⁄8 ¼ 7⁄64 256312 258312 259012 258512 53.75½ 3⁄8 9⁄64 256316 258316 259016 258516 63.855⁄8 3⁄8 9⁄64 256320 258320 259020 258520 67.15

¾ ½ 3⁄16 256324 258324 259024 258524 80.757⁄8 ½ 3⁄16 256328 258328 259028 258528 92.55

1 ½ ¼ 256332 258332 259032 258532 100.951 ¼ ½ 5⁄16 256340 258340 259040 258540 125.60

1 ½ ½ 3⁄8 256348 258348 259048 258548 146.50

DOUBLE ANGLE CUTTERSTYPE 2746 - 60° - FOR NON-FERROUS & CAST IRON

TYPE 2747 - 60° - FOR STEEL

TYPE 2748 - 90° - FOR NON-FERROUS & CAST IRON

TYPE 2749 - 90° - FOR STEELCarbide tips brazed to hardened alloy steel bodies. Right hand cut. Straight shank with Weldon >ats.

ALL TYPES:Angle tolerance: +/- ¼°.Tool diameter tolerance: plus .015”, minus .000”; Corner radius: .010” - .020”.

THREE FLUTE TYPES:The three >ute design tends to center the tool inportable use and results in longer tool life.Right spiral >utes.Carbide tips brazed to alloy steel bodies.

TYPE 2563 - 60° THREE FLUTE COUNTERSINKS




SINGLE FLUTE TYPES:The single >ute design with a positive rake assures burr-free holes.Right spiral >ute.Carbide tips brazed to alloy steel bodies.Not recommended for portable tool use - see three >utetypes.

TYPE 2561 - 60° SINGLE FLUTE COUNTERSINKS




SPIRAL FLUTE COUNTERSINKS & DOUBLE ANGLE CUTTERS

CARBIDE TIPPED

MADE IN USA


AMERICANSTANDARD

NO.

TOOLDIAM.

DIMENSIONS TYPE2700

EDP NO.PRICE

MODIFIEDFACE WIDTH

RANGE


FACEWIDTH

NECKDIAM.

OVERALLLENGTH

NO. OFTEETH

1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14*

204 ½ 1⁄16 .130 2 1⁄16 6 27000204 $91.75 .0575 - .0787 $123.55 $109.80 $105.25 $103.05 $100.70 $98.80304 ½ 3⁄32 .160 2 3⁄32 6 27000304 91.75 .0788 - .1088 123.55 109.80 105.25 103.05 100.70 98.80404 ½ 1⁄8 .191 2 1⁄8 6 27000404 91.75 .1089 - .1400 123.55 109.80 105.25 103.05 100.70 98.80305 5⁄8 3⁄32 .191 2 3⁄32 6 27000305 95.05 .0788 - .1088 127.00 113.25 108.65 106.40 104.10 102.25

405 5⁄8 1⁄8 .223 2 1⁄8 6 27000405 95.05 .1089 - .1400 127.00 113.25 108.65 106.40 104.10 102.25505 5⁄8 5⁄32 .252 2 5⁄32 6 27000505 95.05 .1401 - .1713 127.00 113.25 108.65 106.40 104.10 102.25605 5⁄8 3⁄16 .279 2 3⁄16 6 27000605 95.05 .1714 - .2025 127.00 113.25 108.65 106.40 104.10 102.25406 ¾ 1⁄8 .217 2 1⁄8 6 27000406 99.20 .1100 - .1400 131.35 117.65 113.00 110.80 108.50 106.60

506 ¾ 5⁄32 .246 2 5⁄32 6 27000506 99.20 .1401 - .1713 131.35 117.65 113.00 110.80 108.50 106.60606 ¾ 3⁄16 .279 2 3⁄16 6 27000606 99.20 .1714 - .2025 131.35 117.65 113.00 110.80 108.50 106.60- ¾ 7⁄32 .342 2 7⁄32 6 27002407 108.65 .2026 - .2339 131.35 117.65 113.00 110.80 108.50 106.60

806 ¾ ¼ .342 2 ¼ 6 27000806 99.20 .2340 - .2650 131.35 117.65 113.00 110.80 108.50 106.60

507 7⁄8 5⁄32 .246 2 5⁄32 6 27000507 103.90 .1401 - .1713 136.25 122.55 117.90 115.75 113.40 111.50607 7⁄8 3⁄16 .279 2 3⁄16 6 27000607 103.90 .1714 - .2025 136.25 122.55 117.90 115.75 113.40 111.50707 7⁄8 7⁄32 .312 2 7⁄32 6 27000707 103.90 .2026 - .2339 136.25 122.55 117.90 115.75 113.40 111.50807 7⁄8 ¼ .342 2 ¼ 6 27000807 103.90 .2340 - .2650 136.25 122.55 117.90 115.75 113.40 111.50

608 1 3⁄16 .279 2 3⁄16 8 27000608 117.20 .1714 - .2025 150.20 136.50 131.85 129.65 127.30 125.45708 1 7⁄32 .312 2 7⁄32 8 27000708 117.20 .2026 - .2339 150.20 136.50 131.85 129.65 127.30 125.45808 1 ¼ .342 2 ¼ 8 27000808 117.20 .2340 - .2650 150.20 136.50 131.85 129.65 127.30 125.45- 1 9⁄32 .401 2 9⁄32 8 27003209 128.35 .2651 - .2968 150.20 136.50 131.85 129.65 127.30 125.45

1008 1 5⁄16 .401 2 5⁄16 8 27001008 117.20 .2969 - .3281 150.20 136.50 131.85 129.65 127.30 125.45- 1 11⁄32 .467 2 11⁄32 8 27003211 128.35 .3282 - .3593 150.20 136.50 131.85 129.65 127.30 125.45

1208 1 3⁄8 .467 2 3⁄8 8 27001208 117.20 .3594 - .3900 150.20 136.50 131.85 129.65 127.30 125.45609 1 1⁄8 3⁄16 .312 2 3⁄16 8 27000609 123.10 .1714 - .2025 156.35 142.70 138.05 135.85 133.50 131.65

709 1 1⁄8 7⁄32 .342 2 7⁄32 8 27000709 123.10 .2026 - .2339 156.35 142.70 138.05 135.85 133.50 131.65809 1 1⁄8 ¼ .374 2 ¼ 8 27000809 123.10 .2340 - .2650 156.35 142.70 138.05 135.85 133.50 131.65- 1 1⁄8 9⁄32 .435 2 9⁄32 8 27003609 134.85 .2651 - .2968 156.35 142.70 138.05 135.85 133.50 131.65

1009 1 1⁄8 5⁄16 .435 2 5⁄16 8 27001009 123.10 .2969 - .3281 156.35 142.70 138.05 135.85 133.50 131.65

610 1 ¼ 3⁄16 .312 2 3⁄16 8 27000610 129.25 .1714 - .2025 162.80 149.15 144.50 142.30 139.95 138.05710 1 ¼ 7⁄32 .342 2 7⁄32 8 27000710 129.25 .2026 - .2339 162.80 149.15 144.50 142.30 139.95 138.05810 1 ¼ ¼ .374 2 ¼ 8 27000810 129.25 .2340 - .2650 162.80 149.15 144.50 142.30 139.95 138.05- 1 ¼ 9⁄32 .435 2 9⁄32 8 27004009 141.55 .2651 - .2968 162.80 149.15 144.50 142.30 139.95 138.05

1010 1 ¼ 5⁄16 .435 2 5⁄16 8 27001010 129.25 .2969 - .3281 162.80 149.15 144.50 142.30 139.95 138.05- 1 ¼ 11⁄32 .467 2 11⁄32 8 27004011 141.55 .3282 - .3593 162.80 149.15 144.50 142.30 139.95 138.05

1210 1 ¼ 3⁄8 .467 2 3⁄8 8 27001210 129.25 .3594 - .3900 162.80 149.15 144.50 142.30 139.95 138.05811 1 3⁄8 ¼ .401 2 ¼ 8 27000811 135.80 .2340 - .2650 169.65 155.95 151.35 149.15 146.80 144.95

- 1 3⁄8 9⁄32 .467 2 9⁄32 8 27004409 148.70 .2651 - .2968 169.65 155.95 151.35 149.15 146.80 144.951011 1 3⁄8 5⁄16 .467 2 5⁄16 8 27001011 135.80 .2969 - .3281 169.65 155.95 151.35 149.15 146.80 144.95

- 1 3⁄8 11⁄32 .467 2 11⁄32 8 27004411 148.70 .3282 - .3593 169.65 155.95 151.35 149.15 146.80 144.951211 1 3⁄8 3⁄8 .467 2 3⁄8 8 27001211 135.80 .3594 - .3900 169.65 155.95 151.35 149.15 146.80 144.95

812 1 ½ ¼ .435 2 ¼ 8 27000812 142.55 .2340 - .2650 176.75 163.10 158.45 156.25 153.90 152.05- 1 ½ 9⁄32 .467 2 9⁄32 8 27004809 156.15 .2651 - .2968 176.75 163.10 158.45 156.25 153.90 152.05

1012 1 ½ 5⁄16 .467 2 5⁄16 8 27001012 142.55 .2969 - .3281 176.75 163.10 158.45 156.25 153.90 152.05- 1 ½ 11⁄32 .467 2 11⁄32 8 27004811 156.15 .3282 - .3593 176.75 163.10 158.45 156.25 153.90 152.05

1212 1 ½ 3⁄8 .467 2 3⁄8 8 27001212 142.55 .3594 - .3900 176.75 163.10 158.45 156.25 153.90 152.05- 1 ½ 13⁄32 .467 2 13⁄32 8 27004813 156.15 .3901 - .4219 176.75 163.10 158.45 156.25 153.90 152.05- 1 ½ 7⁄16 .467 2 7⁄16 8 27004814 156.15 .4220 - .4531 176.75 163.10 158.45 156.25 153.90 152.05- 1 ½ 15⁄32 .467 2 15⁄32 8 27004815 156.15 .4532 - .4843 176.75 163.10 158.45 156.25 153.90 152.05

- 1 ½ ½ .467 2 ½ 8 27004816 156.15 .4844 - .5150 176.75 163.10 158.45 156.25 153.90 152.05

TYPE 2700 - STRAIGHT TOOTH

FOR NON-FERROUS & CAST IRON Fast cutting to close tolerances with longer tool life.Carbide tips brazed to hardened alloy steel bodies.Cutting diameter tolerance: plus .020”, plus .015”.Face width tolerance: plus .0000” minus .0005”.Straight shank - ½” diameter, 2” long.Chip breakers on cutters 5⁄32” and greater in width.Decimal sized cutters DO NOT have chip breakers.


OPTIONS: Intermediate decimal & metric face width.Intermediate decimal & metric cutting diameter.Drive >ats on shanks.Radius corners or chamfer corners.

USE: For milling slots in cast iron, non-ferrous metals, plastic and non-metals.

KEYSEAT CUTTERSCARBIDE TIPPED - STRAIGHT TOOTH FOR NON-FERROUS & CAST IRON

MADE IN USA


AMERICANSTANDARD

NO.

TOOLDIAM.

DIMENSIONS TYPE 2701

EDP NO.PRICE

MODIFIEDFACE WIDTH

RANGE


FACEWIDTH

NECKDIAM.

OVERALLLENGTH

NO. OFTEETH

1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14*

204 ½ 1⁄16 .130 2 1⁄16 6 27010204 $107.95 .0575 - .0787 $140.50 $126.80 $122.15 $120.00 $117.65 $115.75304 ½ 3⁄32 .160 2 3⁄32 6 27010304 107.95 .0788 - .1088 140.50 126.80 122.15 120.00 117.65 115.75404 ½ 1⁄8 .191 2 1⁄8 6 27010404 107.95 .1089 - .1400 140.50 126.80 122.15 120.00 117.65 115.75305 5⁄8 3⁄32 .191 2 3⁄32 6 27010305 111.80 .0788 - .1088 144.55 130.85 126.25 124.00 121.70 119.80

405 5⁄8 1⁄8 .223 2 1⁄8 6 27010405 111.80 .1089 - .1400 144.55 130.85 126.25 124.00 121.70 119.80505 5⁄8 5⁄32 .252 2 5⁄32 6 27010505 111.80 .1401 - .1713 144.55 130.85 126.25 124.00 121.70 119.80605 5⁄8 3⁄16 .279 2 3⁄16 6 27010605 111.80 .1714 - .2025 144.55 130.85 126.25 124.00 121.70 119.80406 ¾ 1⁄8 .217 2 1⁄8 6 27010406 116.80 .1100 - .1400 149.80 136.10 131.45 129.25 126.95 125.10

506 ¾ 5⁄32 .246 2 5⁄32 6 27010506 116.80 .1401 - .1713 149.80 136.10 131.45 129.25 126.95 125.10606 ¾ 3⁄16 .279 2 3⁄16 6 27010606 116.80 .1714 - .2025 149.80 136.10 131.45 129.25 126.95 125.10- ¾ 7⁄32 .342 2 7⁄32 6 27012407 127.95 .2026 - .2339 149.80 136.10 131.45 129.25 126.95 125.10

806 ¾ ¼ .342 2 ¼ 6 27010806 116.80 .2340 - .2650 149.80 136.10 131.45 129.25 126.95 125.10

507 7⁄8 5⁄32 .246 2 5⁄32 6 27010507 122.15 .1401 - .1713 155.40 141.65 137.05 134.85 132.50 130.65607 7⁄8 3⁄16 .279 2 3⁄16 6 27010607 122.15 .1714 - .2025 155.40 141.65 137.05 134.85 132.50 130.65707 7⁄8 7⁄32 .312 2 7⁄32 6 27010707 122.15 .2026 - .2339 155.40 141.65 137.05 134.85 132.50 130.65807 7⁄8 ¼ .342 2 ¼ 6 27010807 122.15 .2340 - .2650 155.40 141.65 137.05 134.85 132.50 130.65

608 1 3⁄16 .279 2 3⁄16 8 27010608 137.85 .1714 - .2025 171.85 158.10 153.50 151.25 148.95 147.10708 1 7⁄32 .312 2 7⁄32 8 27010708 137.85 .2026 - .2339 171.85 158.10 153.50 151.25 148.95 147.10808 1 ¼ .342 2 ¼ 8 27010808 137.85 .2340 - .2650 171.85 158.10 153.50 151.25 148.95 147.10- 1 9⁄32 .401 2 9⁄32 8 27013209 151.00 .2651 - .2968 171.85 158.10 153.50 151.25 148.95 147.10

1008 1 5⁄16 .401 2 5⁄16 8 27011008 137.85 .2969 - .3281 171.85 158.10 153.50 151.25 148.95 147.10- 1 11⁄32 .467 2 11⁄32 8 27013211 151.00 .3282 - .3593 171.85 158.10 153.50 151.25 148.95 147.10

1208 1 3⁄8 .467 2 3⁄8 8 27011208 137.85 .3594 - .3900 171.85 158.10 153.50 151.25 148.95 147.10609 1 1⁄8 3⁄16 .312 2 3⁄16 8 27010609 144.70 .1714 - .2025 179.00 165.25 160.65 158.45 156.15 154.25

709 1 1⁄8 7⁄32 .342 2 7⁄32 8 27010709 144.70 .2026 - .2339 179.00 165.25 160.65 158.45 156.15 154.25809 1 1⁄8 ¼ .374 2 ¼ 8 27010809 144.70 .2340 - .2650 179.00 165.25 160.65 158.45 156.15 154.25- 1 1⁄8 9⁄32 .435 2 9⁄32 8 27013609 158.45 .2651 - .2968 179.00 165.25 160.65 158.45 156.15 154.25

1009 1 1⁄8 5⁄16 .435 2 5⁄16 8 27011009 144.70 .2969 - .3281 179.00 165.25 160.65 158.45 156.15 154.25

610 1 ¼ 3⁄16 .312 2 3⁄16 8 27010610 152.00 .1714 - .2025 186.60 172.90 168.30 166.05 163.70 161.85710 1 ¼ 7⁄32 .342 2 7⁄32 8 27010710 152.00 .2026 - .2339 186.60 172.90 168.30 166.05 163.70 161.85810 1 ¼ ¼ .374 2 ¼ 8 27010810 152.00 .2340 - .2650 186.60 172.90 168.30 166.05 163.70 161.85- 1 ¼ 9⁄32 .435 2 9⁄32 8 27014009 166.45 .2651 - .2968 186.60 172.90 168.30 166.05 163.70 161.85

1010 1 ¼ 5⁄16 .435 2 5⁄16 8 27011010 152.00 .2969 - .3281 186.60 172.90 168.30 166.05 163.70 161.85- 1 ¼ 11⁄32 .467 2 11⁄32 8 27014011 166.45 .3282 - .3593 186.60 172.90 168.30 166.05 163.70 161.85

1210 1 ¼ 3⁄8 .467 2 3⁄8 8 27011210 152.00 .3594 - .3900 186.60 172.90 168.30 166.05 163.70 161.85811 1 3⁄8 ¼ .401 2 ¼ 8 27010811 159.65 .2340 - .2650 194.65 181.00 176.40 174.15 171.85 169.90

- 1 3⁄8 9⁄32 .467 2 9⁄32 8 27014409 174.85 .2651 - .2968 194.65 181.00 176.40 174.15 171.85 169.901011 1 3⁄8 5⁄16 .467 2 5⁄16 8 27011011 159.65 .2969 - .3281 194.65 181.00 176.40 174.15 171.85 169.90

- 1 3⁄8 11⁄32 .467 2 11⁄32 8 27014411 174.85 .3282 - .3593 194.65 181.00 176.40 174.15 171.85 169.901211 1 3⁄8 3⁄8 .467 2 3⁄8 8 27011211 159.65 .3594 - .3900 194.65 181.00 176.40 174.15 171.85 169.90

812 1 ½ ¼ .435 2 ¼ 8 27010812 167.70 .2340 - .2650 203.05 189.35 184.70 182.55 180.20 178.30- 1 ½ 9⁄32 .467 2 9⁄32 8 27014809 183.65 .2651 - .2968 203.05 189.35 184.70 182.55 180.20 178.30

1012 1 ½ 5⁄16 .467 2 5⁄16 8 27011012 167.70 .2969 - .3281 203.05 189.35 184.70 182.55 180.20 178.30- 1 ½ 11⁄32 .467 2 11⁄32 8 27014811 183.65 .3282 - .3593 203.05 189.35 184.70 182.55 180.20 178.30

1212 1 ½ 3⁄8 .467 2 3⁄8 8 27011212 167.70 .3594 - .3900 203.05 189.35 184.70 182.55 180.20 178.30- 1 ½ 13⁄32 .467 2 13⁄32 8 27014813 183.65 .3901 - .4219 203.05 189.35 184.70 182.55 180.20 178.30- 1 ½ 7⁄16 .467 2 7⁄16 8 27014814 183.65 .4220 - .4531 203.05 189.35 184.70 182.55 180.20 178.30- 1 ½ 15⁄32 .467 2 15⁄32 8 27014815 183.65 .4532 - .4843 203.05 189.35 184.70 182.55 180.20 178.30

- 1 ½ ½ .467 2 ½ 8 27014816 183.65 .4844 - .5150 203.05 189.35 184.70 182.55 180.20 178.30

TYPE 2701 - STAGGERED TOOTH

FOR NON-FERROUS & CAST IRON Alternate right and left axial rake.Fast cutting to close tolerances with longer tool life.Carbide tips brazed to hardened alloy steel bodies.Cutting diameter tolerance: plus .020”, plus .015”.Face width tolerance: plus .0000” minus .0005”.Straight shank - ½” diameter, 2” long.



USE: For milling slots in cast iron, non-ferrous metals, plastic and non-metals.

KEYSEAT CUTTERSCARBIDE TIPPED - STAGGERED TOOTH FOR NON-FERROUS & CAST IRON

MADE IN USA


AMERICANSTANDARD

NO.

TOOLDIAM.

DIMENSIONS TYPE2702

EDP NO.PRICE

MODIFIEDFACE WIDTH

RANGE


FACEWIDTH

NECKDIAM.

OVERALLLENGTH

NO. OFTEETH

1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14*

204 ½ 1⁄16 .130 2 1⁄16 6 27020204 $106.00 .0575 - .0787 $139.85 $125.45 $120.60 $118.25 $115.80 $113.85304 ½ 3⁄32 .160 2 3⁄32 6 27020304 106.00 .0788 - .1088 139.85 125.45 120.60 118.25 115.80 113.85404 ½ 1⁄8 .191 2 1⁄8 6 27020404 106.00 .1089 - .1400 139.85 125.45 120.60 118.25 115.80 113.85305 5⁄8 3⁄32 .191 2 3⁄32 6 27020305 109.80 .0788 - .1088 143.75 129.35 124.55 122.20 119.80 117.80

405 5⁄8 1⁄8 .223 2 1⁄8 6 27020405 109.80 .1089 - .1400 143.75 129.35 124.55 122.20 119.80 117.80505 5⁄8 5⁄32 .252 2 5⁄32 6 27020505 109.80 .1401 - .1713 143.75 129.35 124.55 122.20 119.80 117.80605 5⁄8 3⁄16 .279 2 3⁄16 6 27020605 109.80 .1714 - .2025 143.75 129.35 124.55 122.20 119.80 117.80406 ¾ 1⁄8 .217 2 1⁄8 6 27020406 114.60 .1100 - .1400 148.90 134.45 129.60 127.25 124.80 122.85

506 ¾ 5⁄32 .246 2 5⁄32 6 27020506 114.60 .1401 - .1713 148.90 134.45 129.60 127.25 124.80 122.85606 ¾ 3⁄16 .279 2 3⁄16 6 27020606 114.60 .1714 - .2025 148.90 134.45 129.60 127.25 124.80 122.85- ¾ 7⁄32 .342 2 7⁄32 6 27022407 125.50 .2026 - .2339 148.90 134.45 129.60 127.25 124.80 122.85

806 ¾ ¼ .342 2 ¼ 6 27020806 114.60 .2340 - .2650 148.90 134.45 129.60 127.25 124.80 122.85

507 7⁄8 5⁄32 .246 2 5⁄32 6 27020507 120.05 .1401 - .1713 154.50 140.10 135.25 132.90 130.50 128.45607 7⁄8 3⁄16 .279 2 3⁄16 6 27020607 120.05 .1714 - .2025 154.50 140.10 135.25 132.90 130.50 128.45707 7⁄8 7⁄32 .312 2 7⁄32 6 27020707 120.05 .2026 - .2339 154.50 140.10 135.25 132.90 130.50 128.45807 7⁄8 ¼ .342 2 ¼ 6 27020807 120.05 .2340 - .2650 154.50 140.10 135.25 132.90 130.50 128.45

608 1 3⁄16 .279 2 3⁄16 8 27020608 135.40 .1714 - .2025 170.55 156.20 151.30 149.05 146.60 144.60708 1 7⁄32 .312 2 7⁄32 8 27020708 135.40 .2026 - .2339 170.55 156.20 151.30 149.05 146.60 144.60808 1 ¼ .342 2 ¼ 8 27020808 135.40 .2340 - .2650 170.55 156.20 151.30 149.05 146.60 144.60- 1 9⁄32 .401 2 9⁄32 8 27023209 148.30 .2651 - .2968 170.55 156.20 151.30 149.05 146.60 144.60

1008 1 5⁄16 .401 2 5⁄16 8 27021008 135.40 .2969 - .3281 170.55 156.20 151.30 149.05 146.60 144.60- 1 11⁄32 .467 2 11⁄32 8 27023211 148.30 .3282 - .3593 170.55 156.20 151.30 149.05 146.60 144.60

1208 1 3⁄8 .467 2 3⁄8 8 27021208 135.40 .3594 - .3900 170.55 156.20 151.30 149.05 146.60 144.60609 1 1⁄8 3⁄16 .312 2 3⁄16 8 27020609 142.20 .1714 - .2025 177.75 163.35 158.45 156.20 153.75 151.75

709 1 1⁄8 7⁄32 .342 2 7⁄32 8 27020709 142.20 .2026 - .2339 177.75 163.35 158.45 156.20 153.75 151.75809 1 1⁄8 ¼ .374 2 ¼ 8 27020809 142.20 .2340 - .2650 177.75 163.35 158.45 156.20 153.75 151.75- 1 1⁄8 9⁄32 .435 2 9⁄32 8 27023609 155.70 .2651 - .2968 177.75 163.35 158.45 156.20 153.75 151.75

1009 1 1⁄8 5⁄16 .435 2 5⁄16 8 27021009 142.20 .2969 - .3281 177.75 163.35 158.45 156.20 153.75 151.75

610 1 ¼ 3⁄16 .312 2 3⁄16 8 27020610 149.30 .1714 - .2025 185.20 170.75 165.95 163.60 161.15 159.20710 1 ¼ 7⁄32 .342 2 7⁄32 8 27020710 149.30 .2026 - .2339 185.20 170.75 165.95 163.60 161.15 159.20810 1 ¼ ¼ .374 2 ¼ 8 27020810 149.30 .2340 - .2650 185.20 170.75 165.95 163.60 161.15 159.20- 1 ¼ 9⁄32 .435 2 9⁄32 8 27024009 163.50 .2651 - .2968 185.20 170.75 165.95 163.60 161.15 159.20

1010 1 ¼ 5⁄16 .435 2 5⁄16 8 27021010 149.30 .2969 - .3281 185.20 170.75 165.95 163.60 161.15 159.20- 1 ¼ 11⁄32 .467 2 11⁄32 8 27024011 163.50 .3282 - .3593 185.20 170.75 165.95 163.60 161.15 159.20

1210 1 ¼ 3⁄8 .467 2 3⁄8 8 27021210 149.30 .3594 - .3900 185.20 170.75 165.95 163.60 161.15 159.20811 1 3⁄8 ¼ .401 2 ¼ 8 27020811 156.85 .2340 - .2650 193.15 178.70 173.85 171.50 169.05 167.10

- 1 3⁄8 9⁄32 .467 2 9⁄32 8 27024409 171.75 .2651 - .2968 193.15 178.70 173.85 171.50 169.05 167.101011 1 3⁄8 5⁄16 .467 2 5⁄16 8 27021011 156.85 .2969 - .3281 193.15 178.70 173.85 171.50 169.05 167.10

- 1 3⁄8 11⁄32 .467 2 11⁄32 8 27024411 171.75 .3282 - .3593 193.15 178.70 173.85 171.50 169.05 167.101211 1 3⁄8 3⁄8 .467 2 3⁄8 8 27021211 156.85 .3594 - .3900 193.15 178.70 173.85 171.50 169.05 167.10

812 1 ½ ¼ .435 2 ¼ 8 27020812 164.65 .2340 - .2650 201.30 186.95 182.10 179.80 177.30 175.40- 1 ½ 9⁄32 .467 2 9⁄32 8 27024809 180.35 .2651 - .2968 201.30 186.95 182.10 179.80 177.30 175.40

1012 1 ½ 5⁄16 .467 2 5⁄16 8 27021012 164.65 .2969 - .3281 201.30 186.95 182.10 179.80 177.30 175.40- 1 ½ 11⁄32 .467 2 11⁄32 8 27024811 180.35 .3282 - .3593 201.30 186.95 182.10 179.80 177.30 175.40

1212 1 ½ 3⁄8 .467 2 3⁄8 8 27021212 164.65 .3594 - .3900 201.30 186.95 182.10 179.80 177.30 175.40- 1 ½ 13⁄32 .467 2 13⁄32 8 27024813 180.35 .3901 - .4219 201.30 186.95 182.10 179.80 177.30 175.40- 1 ½ 7⁄16 .467 2 7⁄16 8 27024814 180.35 .4220 - .4531 201.30 186.95 182.10 179.80 177.30 175.40- 1 ½ 15⁄32 .467 2 15⁄32 8 27024815 180.35 .4532 - .4843 201.30 186.95 182.10 179.80 177.30 175.40

- 1 ½ ½ .467 2 ½ 8 27024816 180.35 .4844 - .5150 201.30 186.95 182.10 179.80 177.30 175.40


TYPE 2702 - STRAIGHT TOOTH

FOR STEEL Fast cutting to close tolerances with longer tool life.Carbide tips brazed to hardened alloy steel bodies.Cutting diameter tolerance: plus .020”, plus .015”.Face width tolerance: plus .0000” minus .0005”.Straight shank - ½” diameter, 2” long.Chip breakers on cutters 5⁄32” and greater in width.Decimal sized cutters DO NOT have chip breakers.


USE: For milling slots in steel.

KEYSEAT CUTTERSCARBIDE TIPPED - STRAIGHT TOOTH FOR STEEL

MADE IN USA


AMERICANSTANDARD

NO.

TOOLDIAM.

DIMENSIONS TYPE2703

EDP NO.PRICE

MODIFIEDFACE WIDTH

RANGE


FACEWIDTH

NECKDIAM.

OVERALLLENGTH

NO. OFTEETH

1 PC. 2 PC. 3 PC. 4 PC. 5-7 8-14*

204 ½ 1⁄16 .130 2 1⁄16 6 27030204 $124.70 .0575 - .0787 $159.40 $145.00 $140.20 $137.85 $135.40 $133.45304 ½ 3⁄32 .160 2 3⁄32 6 27030304 124.70 .0788 - .1088 159.40 145.00 140.20 137.85 135.40 133.45404 ½ 1⁄8 .191 2 1⁄8 6 27030404 124.70 .1089 - .1400 159.40 145.00 140.20 137.85 135.40 133.45305 5⁄8 3⁄32 .191 2 3⁄32 6 27030305 129.10 .0788 - .1088 164.05 149.65 144.85 142.50 140.10 138.10

405 5⁄8 1⁄8 .223 2 1⁄8 6 27030405 129.10 .1089 - .1400 164.05 149.65 144.85 142.50 140.10 138.10505 5⁄8 5⁄32 .252 2 5⁄32 6 27030505 129.10 .1401 - .1713 164.05 149.65 144.85 142.50 140.10 138.10605 5⁄8 3⁄16 .279 2 3⁄16 6 27030605 129.10 .1714 - .2025 164.05 149.65 144.85 142.50 140.10 138.10406 ¾ 1⁄8 .217 2 1⁄8 6 27030406 134.90 .1100 - .1400 170.15 155.75 150.95 148.60 146.10 144.15

506 ¾ 5⁄32 .246 2 5⁄32 6 27030506 134.90 .1401 - .1713 170.15 155.75 150.95 148.60 146.10 144.15606 ¾ 3⁄16 .279 2 3⁄16 6 27030606 134.90 .1714 - .2025 170.15 155.75 150.95 148.60 146.10 144.15- ¾ 7⁄32 .342 2 7⁄32 6 27032407 147.75 .2026 - .2339 170.15 155.75 150.95 148.60 146.10 144.15

806 ¾ ¼ .342 2 ¼ 6 27030806 134.90 .2340 - .2650 170.15 155.75 150.95 148.60 146.10 144.15

507 7⁄8 5⁄32 .246 2 5⁄32 6 27030507 141.15 .1401 - .1713 176.60 162.20 157.35 154.95 152.55 150.65607 7⁄8 3⁄16 .279 2 3⁄16 6 27030607 141.15 .1714 - .2025 176.60 162.20 157.35 154.95 152.55 150.65707 7⁄8 7⁄32 .312 2 7⁄32 6 27030707 141.15 .2026 - .2339 176.60 162.20 157.35 154.95 152.55 150.65807 7⁄8 ¼ .342 2 ¼ 6 27030807 141.15 .2340 - .2650 176.60 162.20 157.35 154.95 152.55 150.65

608 1 3⁄16 .279 2 3⁄16 8 27030608 159.20 .1714 - .2025 195.55 181.20 176.35 174.00 171.55 169.60708 1 7⁄32 .312 2 7⁄32 8 27030708 159.20 .2026 - .2339 195.55 181.20 176.35 174.00 171.55 169.60808 1 ¼ .342 2 ¼ 8 27030808 159.20 .2340 - .2650 195.55 181.20 176.35 174.00 171.55 169.60- 1 9⁄32 .401 2 9⁄32 8 27033209 174.40 .2651 - .2968 195.55 181.20 176.35 174.00 171.55 169.60

1008 1 5⁄16 .401 2 5⁄16 8 27031008 159.20 .2969 - .3281 195.55 181.20 176.35 174.00 171.55 169.60- 1 11⁄32 .467 2 11⁄32 8 27033211 174.40 .3282 - .3593 195.55 181.20 176.35 174.00 171.55 169.60

1208 1 3⁄8 .467 2 3⁄8 8 27031208 159.20 .3594 - .3900 195.55 181.20 176.35 174.00 171.55 169.60609 1 1⁄8 3⁄16 .312 2 3⁄16 8 27030609 167.10 .1714 - .2025 203.85 189.40 184.60 182.30 179.90 177.85

709 1 1⁄8 7⁄32 .342 2 7⁄32 8 27030709 167.10 .2026 - .2339 203.85 189.40 184.60 182.30 179.90 177.85809 1 1⁄8 ¼ .374 2 ¼ 8 27030809 167.10 .2340 - .2650 203.85 189.40 184.60 182.30 179.90 177.85- 1 1⁄8 9⁄32 .435 2 9⁄32 8 27033609 183.00 .2651 - .2968 203.85 189.40 184.60 182.30 179.90 177.85

1009 1 1⁄8 5⁄16 .435 2 5⁄16 8 27031009 167.10 .2969 - .3281 203.85 189.40 184.60 182.30 179.90 177.85

610 1 ¼ 3⁄16 .312 2 3⁄16 8 27030610 175.55 .1714 - .2025 212.65 198.20 193.45 191.10 188.70 186.70710 1 ¼ 7⁄32 .342 2 7⁄32 8 27030710 175.55 .2026 - .2339 212.65 198.20 193.45 191.10 188.70 186.70810 1 ¼ ¼ .374 2 ¼ 8 27030810 175.55 .2340 - .2650 212.65 198.20 193.45 191.10 188.70 186.70- 1 ¼ 9⁄32 .435 2 9⁄32 8 27034009 192.30 .2651 - .2968 212.65 198.20 193.45 191.10 188.70 186.70

1010 1 ¼ 5⁄16 .435 2 5⁄16 8 27031010 175.55 .2969 - .3281 212.65 198.20 193.45 191.10 188.70 186.70- 1 ¼ 11⁄32 .467 2 11⁄32 8 27034011 192.30 .3282 - .3593 212.65 198.20 193.45 191.10 188.70 186.70

1210 1 ¼ 3⁄8 .467 2 3⁄8 8 27031210 175.55 .3594 - .3900 212.65 198.20 193.45 191.10 188.70 186.70811 1 3⁄8 ¼ .401 2 ¼ 8 27030811 184.45 .2340 - .2650 221.95 207.65 202.70 200.45 198.00 196.00

- 1 3⁄8 9⁄32 .467 2 9⁄32 8 27034409 201.95 .2651 - .2968 221.95 207.65 202.70 200.45 198.00 196.001011 1 3⁄8 5⁄16 .467 2 5⁄16 8 27031011 184.45 .2969 - .3281 221.95 207.65 202.70 200.45 198.00 196.00

- 1 3⁄8 11⁄32 .467 2 11⁄32 8 27034411 201.95 .3282 - .3593 221.95 207.65 202.70 200.45 198.00 196.001211 1 3⁄8 3⁄8 .467 2 3⁄8 8 27031211 184.45 .3594 - .3900 221.95 207.65 202.70 200.45 198.00 196.00

812 1 ½ ¼ .435 2 ¼ 8 27030812 193.65 .2340 - .2650 231.65 217.25 212.40 210.10 207.65 205.70- 1 ½ 9⁄32 .467 2 9⁄32 8 27034809 212.10 .2651 - .2968 231.65 217.25 212.40 210.10 207.65 205.70

1012 1 ½ 5⁄16 .467 2 5⁄16 8 27031012 193.65 .2969 - .3281 231.65 217.25 212.40 210.10 207.65 205.70- 1 ½ 11⁄32 .467 2 11⁄32 8 27034811 212.10 .3282 - .3593 231.65 217.25 212.40 210.10 207.65 205.70

1212 1 ½ 3⁄8 .467 2 3⁄8 8 27031212 193.65 .3594 - .3900 231.65 217.25 212.40 210.10 207.65 205.70- 1 ½ 13⁄32 .467 2 13⁄32 8 27034813 212.10 .3901 - .4219 231.65 217.25 212.40 210.10 207.65 205.70- 1 ½ 7⁄16 .467 2 7⁄16 8 27034814 212.10 .4220 - .4531 231.65 217.25 212.40 210.10 207.65 205.70- 1 ½ 15⁄32 .467 2 15⁄32 8 27034815 212.10 .4532 - .4843 231.65 217.25 212.40 210.10 207.65 205.70

- 1 ½ ½ .467 2 ½ 8 27034816 212.10 .4844 - .5150 231.65 217.25 212.40 210.10 207.65 205.70


TYPE 2703 - STAGGERED TOOTH

FOR STEEL Alternate right and left axial rake. Fast cutting to close tolerances with longer tool life.Carbide tips brazed to hardened alloy steel bodies.Cutting diameter tolerance: plus .020”, plus .015”.Face width tolerance: plus .0000” minus .0005”.Straight shank - ½” diameter, 2” long.


USE: For milling slots in steel.

KEYSEAT CUTTERSCARBIDE TIPPED - STAGGERED TOOTH FOR STEEL

MADE IN USA


KEYSEAT CUTTERSCARBIDE TIPPED - HIGH PERFORMANCE FOR ALUMINUM

TYPE 2704 - STRAIGHT TOOTH - FOR ALUMINUM

HIGH PERFORMANCECarbide tips brazed to hardened alloy steel bodies.Cutting diameter tolerance: plus .020”, plus .015”.Face width tolerance: plus .0005” minus .0005”.

AMERICAN

STANDARD

NO.

TOOL

DIAM.

DIMENSIONS TYPE

2704

EDP

NO.

PRICE

MODIFIED

FACE WIDTH

RANGEFACE

WIDTH

NECK

DIAM.

OVER-

ALL

LEN.

NO.

OF

TEETH

- 5⁄8 1⁄16 .160 2 1⁄16 2 27042002 $112.45 .0575 - .0787305 5⁄8 3⁄32 .191 2 3⁄32 2 27040305 112.45 .0788 - .1099405 5⁄8 1⁄8 .223 2 1⁄8 2 27040405 112.45 .1100 - .1400505 5⁄8 5⁄32 .252 2 5⁄32 2 27040505 112.45 .1401 - .1713

605 5⁄8 3⁄16 .279 2 3⁄16 2 27040605 112.45 .1714 - .2025- 5⁄8 7⁄32 .342 2 7⁄32 2 27042007 112.45 .2026 - .2339- 5⁄8 ¼ .342 2 ¼ 2 27042008 112.45 .2340 - .2650

- ¾ 1⁄16 .160 2 1⁄16 2 27042402 118.10 .0575 - .0787

- ¾ 3⁄32 .191 2 3⁄32 2 27042403 118.10 .0788 - .1099406 ¾ 1⁄8 .217 2 1⁄8 2 27040406 118.10 .1100 - .1400506 ¾ 5⁄32 .246 2 5⁄32 2 27040506 118.10 .1401 - .1713606 ¾ 3⁄16 .279 2 3⁄16 2 27040606 118.10 .1714 - .2025

- ¾ 7⁄32 .342 2 7⁄32 2 27042407 118.10 .2026 - .2339806 ¾ ¼ .342 2 ¼ 2 27040806 118.10 .2340 - .2650

- 7⁄8 1⁄16 .160 2 1⁄16 2 27042802 126.55 .0575 - .0787- 7⁄8 3⁄32 .191 2 3⁄32 2 27042803 126.55 .0788 - .1099

- 7⁄8 1⁄8 .217 2 1⁄8 2 27042804 126.55 .1100 - .1400507 7⁄8 5⁄32 .246 2 5⁄32 2 27040507 126.55 .1401 - .1713607 7⁄8 3⁄16 .279 2 3⁄16 2 27040607 126.55 .1714 - .2025707 7⁄8 7⁄32 .312 2 7⁄32 2 27040707 126.55 .2026 - .2339

807 7⁄8 ¼ .342 2 ¼ 2 27040807 126.55 .2340 - .2650- 1 3⁄32 .191 2 3⁄32 2 27043203 133.55 .0788 - .1088- 1 1⁄8 .217 2 1⁄8 2 27043204 133.55 .1089 - .1400- 1 5⁄32 .246 2 5⁄32 2 27043205 133.55 .1401 - .1713

608 1 3⁄16 .279 2 3⁄16 2 27040608 133.55 .1714 - .2025708 1 7⁄32 .312 2 7⁄32 2 27040708 133.55 .2026 - .2339808 1 ¼ .342 2 ¼ 2 27040808 133.55 .2340 - .2650

- 1 9⁄32 .401 2 9⁄32 2 27043209 133.55 .2651 - .2968

1008 1 5⁄16 .401 2 5⁄16 2 27041008 133.55 .2969 - .3281- 1 11⁄32 .467 2 11⁄32 2 27043211 133.55 .3282 - .3593

1208 1 3⁄8 .467 2 3⁄8 2 27041208 133.55 .3594 - .3900- 1 1⁄8 3⁄32 .217 2 3⁄32 2 27043603 133.55 .0788 - .1088

- 1 1⁄8 1⁄8 .246 2 1⁄8 2 27043604 133.55 .1089 - .1400- 1 1⁄8 5⁄32 .279 2 5⁄32 2 27043605 133.55 .1401 - .1713

609 1 1⁄8 3⁄16 .312 2 3⁄16 2 27040609 133.55 .1714 - .2025709 1 1⁄8 7⁄32 .342 2 7⁄32 2 27040709 133.55 .2026 - .2339

809 1 1⁄8 ¼ .374 2 ¼ 2 27040809 133.55 .2340 - .2650- 1 1⁄8 9⁄32 .435 2 9⁄32 2 27043609 133.55 .2651 - .2968

1009 1 1⁄8 5⁄16 .435 2 5⁄16 2 27041009 133.55 .2969 - .3281- 1 1⁄8 11⁄32 .467 2 11⁄32 2 27043611 133.55 .3282 - .3593

- 1 1⁄8 3⁄8 .467 2 3⁄8 2 27043612 133.55 .3594 - .3900- 1 ¼ 3⁄32 .217 2 3⁄32 3 27044003 140.55 .0788 - .1088- 1 ¼ 1⁄8 .246 2 1⁄8 3 27044004 140.55 .1089 - .1400- 1 ¼ 5⁄32 .279 2 5⁄32 3 27044005 140.55 .1401 - .1713

610 1 ¼ 3⁄16 .312 2 3⁄16 3 27040610 140.55 .1714 - .2025710 1 ¼ 7⁄32 .342 2 7⁄32 3 27040710 140.55 .2026 - .2339810 1 ¼ ¼ .374 2 ¼ 3 27040810 140.55 .2340 - .2650

- 1 ¼ 9⁄32 .435 2 9⁄32 3 27044009 140.55 .2651 - .2968

1010 1 ¼ 5⁄16 .435 2 5⁄16 3 27041010 140.55 .2969 - .3281- 1 ¼ 11⁄32 .467 2 11⁄32 3 27044011 140.55 .3282 - .3593

1210 1 ¼ 3⁄8 .467 2 3⁄8 3 27041210 140.55 .3594 - .3900

AMERICAN

STANDARD

NO.

TOOL

DIAM.

DIMENSIONS TYPE

2704

EDP

NO.

PRICE

MODIFIED

FACE WIDTH

RANGEFACE

WIDTH

NECK

DIAM.

OVER-

ALL

LEN.

NO.

OF

TEETH

- 1 3⁄8 3⁄32 .312 2 3⁄32 3 27044403 $154.60 .0788 - .1088- 1 3⁄8 1⁄8 .342 2 1⁄8 3 27044404 154.60 .1089 - .1400- 1 3⁄8 5⁄32 .374 2 5⁄32 3 27044405 154.60 .1401 - .1713- 1 3⁄8 3⁄16 .401 2 3⁄16 3 27044406 154.60 .1714 - .2025

- 1 3⁄8 7⁄32 .401 2 7⁄32 3 27044407 154.60 .2026 - .2339811 1 3⁄8 ¼ .401 2 ¼ 3 27040811 154.60 .2340 - .2650

- 1 3⁄8 9⁄32 .467 2 9⁄32 3 27044409 154.60 .2651 - .2968

1011 1 3⁄8 5⁄16 .467 2 5⁄16 3 27041011 154.60 .2969 - .3281

- 1 3⁄8 11⁄32 .467 2 11⁄32 3 27044411 154.60 .3282 - .35931211 1 3⁄8 3⁄8 .467 2 3⁄8 3 27041211 154.60 .3594 - .3900

- 1 ½ 3⁄32 .435 2 3⁄32 3 27044803 175.75 .0788 - .1088- 1 ½ 1⁄8 .435 2 1⁄8 3 27044804 175.75 .1089 - .1400

- 1 ½ 5⁄32 .435 2 5⁄32 3 27044805 175.75 .1401 - .1713- 1 ½ 3⁄16 .435 2 3⁄16 3 27044806 175.75 .1714 - .2025- 1 ½ 7⁄32 .435 2 7⁄32 3 27044807 175.75 .2026 - .2339

812 1 ½ ¼ .435 2 ¼ 3 27040812 175.75 .2340 - .2650

- 1 ½ 9⁄32 .467 2 9⁄32 3 27044809 175.75 .2651 - .29681012 1 ½ 5⁄16 .467 2 5⁄16 3 27041012 175.75 .2969 - .3281

- 1 ½ 11⁄32 .467 2 11⁄32 3 27044811 175.75 .3282 - .35931212 1 ½ 3⁄8 .467 2 3⁄8 3 27041212 210.85 .3594 - .3900

- 1 ½ 13⁄32 .467 2 13⁄32 3 27044813 210.85 .3901 - .4219- 1 ½ 7⁄16 .467 2 7⁄16 3 27044814 210.85 .4220 - .4531- 1 ½ 15⁄32 .467 2 15⁄32 3 27044815 210.85 .4532 - .4843- 1 ½ ½ .467 2 ½ 3 27044816 210.85 .4844 - .5150

- 1 ¾ 1⁄8 .718 3 1⁄8 4 27045604 194.00 .1089 - .1400- 1 ¾ 5⁄32 .718 3 5⁄32 4 27045605 194.00 .1401 - .1713- 1 ¾ 3⁄16 .718 3 3⁄16 4 27045606 194.00 .1714 - .2025- 1 ¾ 7⁄32 .718 3 7⁄32 4 27045607 194.00 .2026 - .2339

- 1 ¾ ¼ .718 3 ¼ 4 27045608 194.00 .2340 - .2650- 1 ¾ 9⁄32 .718 3 9⁄32 4 27045609 194.00 .2651 - .2968- 1 ¾ 5⁄16 .718 3 5⁄16 4 27045610 194.00 .2969 - .3281- 1 ¾ 11⁄32 .718 3 11⁄32 4 27045611 194.00 .3282 - .3593

- 1 ¾ 3⁄8 .718 3 3⁄8 4 27045612 227.80 .3594 - .3900- 1 ¾ 13⁄32 .718 3 13⁄32 4 27045613 227.80 .3901 - .4219- 1 ¾ 7⁄16 .718 3 7⁄16 4 27045614 227.80 .4220 - .4531- 1 ¾ 15⁄32 .718 3 15⁄32 4 27045615 227.80 .4532 - .4843

- 1 ¾ ½ .718 3 ½ 4 27045616 227.80 .4844 - .5150- 2 1⁄8 .718 3 1⁄8 4 27046404 224.90 .1089 - .1400- 2 5⁄32 .718 3 5⁄32 4 27046405 224.90 .1401 - .1713- 2 3⁄16 .718 3 3⁄16 4 27046406 224.90 .1714 - .2025

- 2 7⁄32 .718 3 7⁄32 4 27046407 224.90 .2026 - .2339- 2 ¼ .718 3 ¼ 4 27046408 224.90 .2340 - .2650- 2 9⁄32 .718 3 9⁄32 4 27046409 224.90 .2651 - .2968- 2 5⁄16 .718 3 5⁄16 4 27046410 224.90 .2969 - .3281

- 2 11⁄32 .718 3 11⁄32 4 27046411 224.90 .3282 - .3593- 2 3⁄8 .718 3 3⁄8 4 27046412 260.10 .3594 - .3900- 2 13⁄32 .718 3 13⁄32 4 27046413 260.10 .3901 - .4219- 2 7⁄16 .718 3 7⁄16 4 27046414 260.10 .4220 - .4531

- 2 15⁄32 .718 3 15⁄32 4 27046415 260.10 .4532 - .4843- 2 ½ .718 3 ½ 4 27046416 260.10 .4844 - .5150- - - - - - -

*TOOL DIAM. SHANK DIAM.

Up to 1 ½” ½”

1 ¾” to 2” ¾”


USE: For milling, slotting, grooving, snap rings, and O-rings. Also used in circular interpolation of spotfacing, back spotfacing, and counterboring. Starting point for Aluminum slotting: 1K-4K SFPM, .002-.008 IPT. Reduce SFPM and IPT by 25% for widths under .0938.

*Contact Rock River Tool for price and availability on diameters greater than 2”.

MADE IN USA


TOOLDIAM.

SHANKDIAM.

OVER-ALL

LENGTH

NECKDIAM.

NO. OFTEETH

45˚ INCLUDED ANGLE 60˚ INCLUDED ANGLE

CUTTERWIDTH

TYPE 2734CAST IRON

EDP NO.PRICE

TYPE 2735STEEL

EDP NO.PRICE

CUTTERWIDTH

TYPE 2736CAST IRON

EDP NO.PRICE

TYPE 2737STEEL

EDP NO.PRICE

½ 3⁄8 2 1⁄8 3⁄16 3 5⁄32 273416 $114.25 273516 $123.50 7⁄32 273616 $114.25 273716 $123.50¾ 3⁄8 2 ¼ ¼ 3 ¼ 273424 123.30 273524 133.10 ¼ 273624 123.30 273724 133.10

1 ½ 2 ½ 3⁄8 4 5⁄16 273432 131.85 273532 142.45 3⁄8 273632 131.85 273732 142.451 ¼ 5⁄8 2 ¾ ½ 4 3⁄8 273440 149.90 273540 161.95 ½ 273640 149.90 273740 161.95

1 ½ ¾ 3 ¼ ½ 4 ½ 273448 175.15 273548 189.20 5⁄8 273648 175.15 273748 189.202 1 4 ¼ ¾ 6 5⁄8 273464 281.45 273564 303.95 ¾ 273664 281.45 273764 303.952 ½ 1 ¼ 4 3⁄8 1 6 ¾ 273480 380.60 273580 410.95 7⁄8 273680 380.60 273780 410.953 1 ¼ 4 ½ 1 6 1 273496 448.80 273596 484.75 1 1⁄8 273696 448.80 273796 484.75

BOLTDIAMETER

TOOLDIAMETER

CUTTERWIDTH

NECKDIAMETER

OVERALLLENGTH

SHANKDIAMETER

UNDERCUTLENGTH

NO. OFTEETH

TYPE 2720CAST IRON

EDP NO.PRICE

TYPE 2721STEEL

EDP NO.PRICE

¼ 9⁄16 15⁄64 17⁄64 2 19⁄32 ½ 35⁄64 6 272008 $121.55 272108 $131.255⁄16 21⁄32 17⁄64 21⁄64 2 11⁄16 ½ 39⁄64 6 272010 120.05 272110 129.653⁄8 25⁄32 21⁄64 13⁄32 3 ¼ ¾ 55⁄64 6 272012 151.05 272112 163.20½ 31⁄32 25⁄64 17⁄32 3 7⁄16 ¾ 63⁄64 6 272016 164.25 272116 177.35

5⁄8 1 ¼ 31⁄64 21⁄32 3 15⁄16 1 1 9⁄64 6 272020 218.00 272120 235.50¾ 1 15⁄32 5⁄8 25⁄32 4 7⁄16 1 1 ½ 6 272024 243.60 272124 263.05

1 1 27⁄32 53⁄64 1 1⁄32 4 13⁄16 1 ¼ 1 43⁄64 8 272032 347.80 272132 375.651 ¼ 2 7⁄32 1 3⁄32 1 7⁄32 5 3⁄8 1 ¼ 1 31⁄32 8 272040 438.90 272140 474.05

1 ½ 2 21⁄32 1 11⁄32 1 17⁄32 5 29⁄32 1 ¼ 2 1⁄8 8 272048 508.25 272148 548.95

T-SLOT & DOVETAIL CUTTERSCARBIDE TIPPED

TYPE 2720 - T-SLOT CUTTERS FOR NON-FERROUS

AND CAST IRONRight and left hand helix with side cutting teeth.Straight shank with drive >ats.Cutting diameter tolerance plus .000”, minus .010”.

TYPE 2721 - T-SLOT CUTTERS FOR STEELSame as Type 2720 above except carbide grade and geometry selected for cutting steel.

DOVETAIL CUTTERSTYPE 2734 - 45˚ DOVETAIL - FOR NON-FERROUS AND

CAST IRON

TYPE 2735 - 45˚ DOVETAIL - FOR STEEL

TYPE 2736 - 60˚ DOVETAIL - FOR NON-FERROUS AND

CAST IRON

TYPE 2737 - 60˚ DOVETAIL - FOR STEELRight Hand CutStraight shank with drive >ats.

NOTE:These dovetail cutters have a corner radius of .015” - .020”.

MADE IN USA


TYPE 2730 - 45° FOR NON-FERROUS & CAST IRON

TYPE 2731 - 45° FOR STEEL

TYPE 2732 - 60° FOR NON-FERROUS & CAST IRON

TYPE 2733 - 60° FOR STEELRight hand cut.Straight shank with Weldon "ats.Tool diameter tolerance: plus .015”, minus .000”.Tool geometry & carbide grade appropriate for material being machined.

TOOLDIAMETER

DIMENSIONS 45˚ ANGLE 60˚ ANGLE

SHANKDIAM.

OVERALLLENGTH

NO. OFTEETH

TOOLWIDTH

TYPE 2730N-F/CI

EDP NO.PRICE

TYPE 2731STEEL

EDP NO.PRICE

TOOLWIDTH

TYPE 2732N-F/CI

EDP NO.PRICE

TYPE 2733STEEL

EDP NO.PRICE

½ 3⁄8 2 1⁄8 4 1⁄8 273016 $148.65 273116 $163.45 7⁄32 273216 $148.65 273316 $163.45¾ 3⁄8 2 1⁄8 6 3⁄16 273024 160.25 273124 176.20 5⁄16 273224 160.25 273324 176.20

1 ½ 2 ½ 6 5⁄16 273032 188.00 273132 206.75 7⁄16 273232 188.00 273332 206.751 ½ ¾ 2 ¾ 8 ½ 273048 238.25 273148 262.20 5⁄8 273248 238.25 273348 262.20

CHAMFER MILLING CUTTERS CARBIDE TIPPED - 45° AND 60° CUTTERS

OPTIONS:Reduced neck diameter.Shortened shank or reduced shank diameter.Additional shank drive "at(s).

RADIUS CUTTERS - CARBIDE TIPPED

TYPE 2718 - FOR NON-FERROUS & CAST IRON

TYPE 2719 - FOR STEELRight hand cut; Convex radius.Straight shank with Weldon "ats.Tool geometry & carbide grade appropriate for material being machined.Tool diameter tolerance: plus .005”, minus .000”.Tool radius tolerance thru 1⁄8” radius: plus .001”, minus .001”. over 1⁄8” radius: plus .002”, minus .002”.

OPTIONS:Reduced neck diameter.Shortened shank or reduced shank diameter.Additional shank drive "at(s).

TOOLRADIUS

TOOLDIAMETER

DIMENSIONSTYPE 2718

N-F/CIEDP NO.

PRICETYPE 2719

STEELEDP NO.

PRICETOOLWIDTH

SHANKDIAM.

OVERALLLENGTH

NO. OFTEETH

1⁄32 ¾ 1⁄16 ½ 3 6 271801 $176.05 271901 $193.701⁄16 ¾ 1⁄8 ½ 3 6 271802 176.05 271902 193.703⁄32 7⁄8 3⁄16 ½ 3 6 271803 192.50 271903 211.651⁄8 1 ¼ ¼ ¾ 3 ½ 6 271804 209.45 271904 230.45

5⁄32 1 5⁄16 5⁄16 ¾ 3 ½ 6 271805 241.05 271905 265.153⁄16 1 3⁄8 3⁄8 ¾ 3 ½ 6 271806 255.10 271906 280.60¼ 1 ½ ½ ¾ 4 6 271808 264.05 271908 290.50

MADE IN USA


TOOLDIAMETER

WIDTHARBORHOLE

NO. OFTEETH

RIGHT 45°TYPE 2714

EDP NO.

LEFT 45°TYPE 2716

EDP NO.

RIGHT 60°TYPE 2724

EDP NO.

LEFT 60°TYPE 2726

EDP NO.

ALLTYPESPRICE

3 ½ 1 8 271408 271608 272408 272608 $336.504 ½ 1 ¼ 10 271416 271616 272416 272616 416.454 ¾ 1 ¼ 10 271424 271624 272424 272624 451.80

ANGLE & STAGGERED TOOTH CUTTERSCARBIDE TIPPED

TYPE 2714 - 45° RIGHT

TYPE 2716 - 45° LEFT

TYPE 2724 - 60° RIGHT

TYPE 2726 - 60° LEFTCarbide tips brazed to alloy steel bodies.General purpose cutters for cutting non- ferrous materials and cast iron.

SINGLE ANGLE CUTTERS

TYPE 2750 - 45° INCLUDED

TYPE 2752 - 60° INCLUDED

TYPE 2754 - 90° INCLUDED Carbide tips brazed to alloy steel bodies.General purpose cutters for cutting non- ferrous materials and cast iron.

DOUBLE ANGLE CUTTERS

TOOLDIAMETER

WIDTHARBORHOLE

NO. OFTEETH

45°TYPE 2750

EDP NO.

60°TYPE 2752

EDP NO.

90°TYPE 2754

EDP NO.

ALLTYPESPRICE

2 ¾ ½ 1 8 - 275207 275407 283.303 ½ 1 8 275008 275208 275408 353.304 ½ 1 ¼ 10 275016 275216 275416 437.254 ¾ 1 ¼ 10 275024 275224 275424 474.30

4 1 1 ¼ 10 - 275232 275432 555.10

TOOLDIAM.

THICKNESS TYPE 2547 FOR MOST MATERIALS

FRAC. DEC.NO. OF TEETH

1” ARBOR EDP NO.

1¼” ARBOREDP NO.

PRICE

3 3⁄16 .1875 8 254710 - $600.853 ¼ .2500 8 254712 - 615.153 5⁄16 .3125 8 254714 - 620.653 3⁄8 .3750 8 254716 - 623.10

3 ½ .5000 8 254718 - 642.453 5⁄8 .6250 8 254720 - 687.80

4 3⁄16 .1875 10 254722 - 652.804 ¼ .2500 10 254724 - 660.95

4 5⁄16 .3125 10 254726 - 668.954 3⁄8 .3750 10 254728 - 677.004 ½ .5000 10 254730 - 686.504 5⁄8 .6250 10 254732 - 699.30

4 ¾ .7500 10 254734 - 707.206 ¼ .2500 14 - 254750 848.656 5⁄16 .3125 14 - 254752 855.056 3⁄8 .3750 14 - 254754 856.30

6 ½ .5000 14 - 254756 867.45

6 5⁄8 .6250 14 - 254758 872.406 ¾ .7500 14 - 254760 900.856 1 1.0000 14 - 254762 964.55

TYPE 2547 - FOR MOST MATERIALS For milling most types of materials including steels, stainless steels, cast irons, aluminums, and composite materials. Alternating right and left hand axial rake. Carbide extends across the entire length of each tooth.

STAGGERED TOOTH

SIDE MILLING CUTTERS

Tool diameter tolerance: +1⁄16”/-0”Face width tolerance: +.001”/-0”Arbor hole tolerance: +.001”/-0”

MADE IN USA


SIDE MILLING CUTTERS CARBIDE TIPPED - FOUR TYPES - NON-FERROUS, CAST IRON,

STEEL OR HIGH TEMP ALLOY

TYPE 2540 - FOR NON-FERROUS MACHININGUse for production milling of aluminum, magnesium, zinc, brass, bronze, plastics and non-metals.Very large "ute capacity assures good chip "ow and permits high feed rates.

TYPE 2541 - FOR CAST IRON MACHININGUse for heavy production milling of cast iron and malleable iron.Large "ute capacity but more teeth permits high metal removal at moderate speeds and feeds.

TYPE 2542 - FOR STEEL MACHININGUse for production milling of steel.Steel cutting grade of carbide permits the heavy chiploads recommended for milling steel.

TYPE 2543 - FOR HIGH TEMP ALLOY MACHININGUse for production milling of austenitic and PH series ofstainless steel and other high temp alloys. Larger numberof teeth.

ALL TYPES:For slotting, straddle milling and face milling.Carbide tips brazed to alloy steel bodies.Cutting diameter tolerance: plus 1/16” minus .000”.Face width tolerance: plus .001” minus .000”.Arbor hole tolerance: plus .001” minus .000”.

TOOLDIAM.

THICKNESS TYPE 2540 FOR NON-FERROUS TYPE 2541 FOR CAST IRON TYPE 2542 FOR STEEL TYPE 2543 FOR HIGH TEMP ALLOY

FRAC. DEC.NO. OFTEETH

1” ARBOR EDP NO.

1¼” ARBOREDP NO.

PRICENO. OF TEETH

1” ARBOR EDP NO.

1¼” ARBOREDP NO.

PRICENO. OF TEETH

1” ARBOR EDP NO.

1¼” ARBOREDP NO.

PRICENO. OF TEETH

1” ARBOR EDP NO.

1¼” ARBOREDP NO.

PRICE

3 ¼ .2500 4 254030 - $114.75 6 254130 - $143.55 6 254230 - $141.75 8 254330 - $176.803 5⁄16 .3125 4 254031 - 120.50 6 254131 - 144.20 6 254231 - 143.65 8 254331 - 185.303 3⁄8 .3750 4 254032 - 124.90 6 254132 - 147.05 6 254232 - 145.50 8 254332 - 187.803 7⁄16 .4375 4 254033 - 130.00 6 254133 - 159.05 6 254233 - 162.25 - - - -

3 ½ .5000 4 254034 - 136.30 6 254134 - 165.60 6 254234 - 164.45 8 254334 - 209.954 ¼ .2500 4 254040 - 149.60 8 254140 - 185.45 8 254240 - 186.65 10 254340 - 221.10

4 5⁄16 .3125 4 254041 - 153.85 8 254141 - 191.70 8 254241 - 198.20 10 254341 - 232.254 3⁄8 .3750 4 254042 254043 157.85 8 254142 254143 201.45 8 254242 254243 198.20 10 254342 254343 237.50

4 7⁄16 .4375 4 254074 - 158.60 8 254174 - 205.50 8 254274 - 204.10 10 254374 - 257.854 ½ .5000 4 254044 254045 158.60 8 254144 254145 212.25 8 254244 254245 211.20 10 254344 254345 259.804 9⁄16 .5625 4 254094 - 172.40 8 254194 - 218.15 8 254294 - 221.65 - - - -4 5⁄8 .6250 4 254046 254047 185.00 8 254146 254147 236.45 8 254246 254247 259.10 10 254346 254347 273.60

4 ¾ .7500 4 254048 254049 207.30 8 254148 254149 236.45 8 254248 254249 262.40 10 254348 254349 281.805 ¼ .2500 6 254050 - 209.00 10 254150 - 245.60 10 254250 - 245.75 - - - -5 5⁄16 .3125 - - - - 10 254151 - 245.60 10 254251 - 245.75 - - - -5 3⁄8 .3750 - - - - 10 - 254153 251.55 10 - 254253 258.00 - - - -

5 7⁄16 .4375 6 - 254075 217.40 10 - 254175 252.80 10 - 254275 266.30 - - - -

5 ½ .5000 6 254054 254055 220.00 10 254154 254155 268.35 10 254254 254255 266.35 12 254354 254355 298.455 9⁄16 .5625 6 - 254095 227.05 10 - 254195 272.95 10 - 254295 278.10 - - - -5 5⁄8 .6250 6 - 254057 238.85 10 - 254157 290.50 10 - 254257 326.40 12 - 254357 325.95

5 ¾ .7500 6 254058 254059 254.65 10 254158 254159 328.95 10 254258 254259 361.25 12 254358 254359 365.555 1 1.0000 6 - 254015 255.05 10 - 254115 357.95 10 - 254215 381.00 - - - -6 3⁄8 .3750 6 254062 - 224.25 12 - 254163 309.05 12 - 254263 326.50 - - - -6 ½ .5000 6 254064 254065 245.60 12 254164 254165 328.20 12 254264 254265 336.25 14 254364 254365 383.95

6 5⁄8 .6250 6 - 254067 269.15 12 - 254167 358.65 12 - 254267 365.80 14 - 254367 387.056 ¾ .7500 6 254068 254069 309.55 12 254168 254169 402.40 12 254268 254269 416.70 14 254368 254369 417.656 1 1.0000 6 - 254016 354.80 12 - 254116 406.65 12 - 254216 425.15 - - - -

1¼” ARBOR 1½” ARBOR 1¼” ARBOR 1½” ARBOR 1¼” ARBOR 1½” ARBOR 1¼” ARBOR 1½” ARBOR

8 ¾ .7500 8 254088 254089 402.70 12 254188 254189 422.30 12 254288 254289 438.10 14 254388 - 447.808 1 1.0000 8 254080 254081 437.00 12 254180 254181 440.15 12 254280 254281 455.95 - - - -

OPTIONS:Alternate chamfer every other tooth.Radius both sides.Chamfer both sides.

MADE IN USA


SLITTING SAWS - COARSE TOOTH CARBIDE TIPPED - FOUR TYPES - NON-FERROUS, CAST IRON,


TYPE 2550 - FOR NON-FERROUSUse for machining aluminum, magnesium, zinc,brass, bronze, plastics and non-metals.

TYPE 2552 - FOR CAST IRONUse for machining cast iron and malleable iron.

TYPE 2554 - FOR STEELUse for machining steel.Steel cutting grade of carbide.

TYPE 2558 - FOR HIGH TEMP ALLOYUse for production milling of austenitic and PHseries of stainless steel and other high temp alloys.Larger number of teeth.

ALL TYPES:For slitting, slotting, milling and cut-o\ operations.Precision ground.Cutting diameter tolerance plus 1/16” minus .000”.Arbor hole tolerance plus .001” minus .000”.Face width tolerance plus .001” minus .000”.

OPTIONS:Alternate chamfer every other tooth.Chamfer both sides.Radius both sides.Tighter tolerances for cutting diameter and face width.

SAWDIAM.

THICKNESSARBORHOLE

TYPE 2550 FOR NON-FERROUS TYPE 2552 FOR CAST IRON TYPE 2554 FOR STEEL TYPE 2558 FOR HIGH TEMP ALLOY


EDP NO.

PRICENO. OF TEETH

EDP NO.

PRICENO. OF TEETH

EDP NO.

PRICENO. OF TEETH

EDP NO.

PRICE

3 3⁄32 .0938 1 6 255032 $136.10 6 255232 $156.65 8 255432 $155.30 8 255832 $145.503 1⁄8 .1250 1 6 255034 140.20 6 255234 165.90 8 255434 173.80 8 255834 151.053 3⁄16 .1875 1 6 255036 145.75 6 255236 175.45 8 255436 175.45 8 255836 156.903 ¼ .2500 1 6 255037 99.10 6 255237 143.85 8 255437 143.85 8 255837 172.65

3 5⁄16 .3125 1 6 255031 104.10 6 255231 143.85 8 255431 143.85 8 255831 172.653 3⁄8 .3750 1 6 255038 106.15 6 255238 146.15 8 255438 146.15 8 255838 175.45

4 3⁄32 .0938 1 6 255042 167.10 8 255242 200.85 8 255442 200.85 10 255842 209.354 1⁄8 .1250 1 6 255044 172.05 8 255244 203.50 8 255444 203.50 10 255844 212.00

4 3⁄16 .1875 1 6 255046 174.65 8 255246 219.30 8 255446 219.30 10 255846 214.904 ¼ .2500 1 6 255047 127.40 8 255247 186.25 8 255447 186.25 10 255847 223.604 5⁄16 .3125 1 6 255041 130.95 8 255241 193.45 8 255441 193.45 10 255841 232.054 3⁄8 .3750 1 6 255048 134.45 8 255248 200.50 8 255448 200.50 10 255848 240.55

4 3⁄8 .3750 1 ¼ 6 255049 134.45 8 255249 200.50 8 255449 200.50 10 255849 240.555 3⁄32 .0938 1 8 255052 180.80 10 255252 269.65 10 255452 269.65 12 255852 284.605 1⁄8 .1250 1 8 255054 180.80 10 255254 290.00 10 255454 290.00 12 255854 290.505 3⁄16 .1875 1 - - - 10 255256 326.50 10 255456 326.50 12 255856 302.10

6 1⁄8 .1250 1 ¼ 8 255063 246.20 12 255263 353.95 12 255463 353.95 14 255863 339.856 3⁄16 .1875 1 ¼ 8 255065 324.45 12 255265 365.60 12 255465 365.60 14 255865 348.606 ¼ .2500 1 ¼ 8 255067 336.05 12 255267 373.25 12 255467 373.25 14 255867 354.308 1⁄8 .1250 1 ¼ 10 255083 314.70 - - - - - - - - -

8 3⁄16 .1875 1 ¼ - - - 16 255285 503.15 16 255485 503.15 - - -8 ¼ .2500 1 ¼ - - - 16 255287 522.35 16 255487 522.35 - - -

MADE IN USA


SAWDIAM.

THICKNESS TYPE 2551 FOR NON-FERROUS TYPE 2553 FOR CAST IRON TYPE 2556 FOR STEEL TYPE 2559 FOR HIGH TEMP ALLOY


1” ARBOR EDP NO.

1¼” ARBOREDP NO.

PRICENO. OF TEETH

1” ARBOR EDP NO.

1¼” ARBOREDP NO.

PRICENO. OF TEETH

1” ARBOR EDP NO.

1¼” ARBOREDP NO.

PRICENO. OF TEETH

1” ARBOR EDP NO.

1¼” ARBOREDP NO.

PRICE

3 1⁄16 .0625 12 255198 - $214.45 12 255398 - $214.45 16 255698 - $256.40 12 255998 - $241.203 5⁄64 .0781 12 255100 - 253.60 12 255300 - 253.60 16 255600 - 310.05 12 255900 - 270.203 3⁄32 .0938 12 255102 - 214.45 12 255302 - 214.45 16 255602 - 256.40 12 255902 - 241.203 7⁄64 .1094 12 255104 - 213.65 12 255304 - 213.65 16 255604 - 236.60 12 255904 - 230.25

3 1⁄8 .1250 12 255106 255107 172.40 12 255306 255307 172.40 16 255606 - 214.40 12 255906 255907 219.903 5⁄32 .1562 12 255108 - 205.45 12 255308 - 205.45 16 255608 - 225.20 12 255908 - 225.203 3⁄16 .1875 12 255109 - 183.75 12 255309 - 183.75 16 255609 - 236.05 12 255909 - 230.603 7⁄32 .2188 12 255110 - 212.60 12 255310 - 212.60 16 255610 - 246.85 12 255910 - 237.90

3 ¼ .2500 12 255111 - 223.50 12 255311 - 223.50 16 255611 - 257.80 12 255911 - 245.053 5⁄16 .3125 12 255112 - 245.05 12 255312 - 245.05 16 255612 - 282.60 12 255912 - 268.453 3⁄8 .3750 12 255113 - 266.70 12 255313 - 266.70 16 255613 - 307.55 12 255913 - 293.653 7⁄16 .4375 - - - - - - - - 16 255614 - 341.75 12 255914 - 319.10

3 ½ .5000 - - - - - - - - 16 255615 - 379.75 12 255915 - 344.404 1⁄16 .0625 14 255116 255117 249.70 14 255316 - 249.70 20 255616 - 310.05 14 255916 255917 274.304 5⁄64 .0781 14 255118 255119 294.95 14 255318 255319 294.95 20 255618 255619 339.25 14 255918 255919 314.304 3⁄32 .0938 14 255120 255121 249.70 14 255320 255321 249.70 20 255620 255621 310.05 14 255920 255921 274.30

4 7⁄64 .1094 14 255122 255123 255.00 14 255322 255323 255.00 20 255622 255623 293.20 14 255922 255923 325.254 1⁄8 .1250 14 255124 255125 225.20 14 255324 255325 225.20 20 255624 255625 273.90 14 255924 255925 273.904 5⁄32 .1562 14 255126 255127 255.80 14 255326 255327 255.80 20 255626 255627 294.25 14 255926 255927 281.104 3⁄16 .1875 14 255128 255129 239.70 14 255328 255329 239.70 20 255628 255629 295.55 14 255928 255929 290.05

4 7⁄32 .2188 14 255130 255131 272.10 14 255330 255331 272.10 20 255630 255631 312.90 14 255930 255931 299.204 ¼ .2500 14 255132 255133 277.35 14 255332 255333 277.35 20 255632 255633 317.00 14 255932 255933 306.354 5⁄16 .3125 14 255134 255135 299.20 14 255334 255335 299.20 20 255634 255635 343.95 14 255934 255935 327.954 3⁄8 .3750 14 255136 255137 320.75 14 255336 255337 320.75 20 255636 255637 368.85 14 255936 255937 353.10

4 7⁄16 .4375 - - - - - - - - 20 255638 - 409.80 14 255938 - 378.554 ½ .5000 - - - - - - - - 20 255640 - 455.40 14 255940 - 403.955 5⁄64 .0781 16 255142 255143 365.35 16 255342 255343 365.35 24 255642 255643 420.10 16 255942 255943 387.255 3⁄32 .0938 16 255144 255145 301.45 16 255344 255345 301.45 24 255644 255645 423.05 16 255944 255945 332.15

5 7⁄64 .1094 16 255146 255147 343.20 16 255346 255347 343.20 24 255646 255647 394.70 16 255946 255947 365.355 1⁄8 .1250 16 255148 255149 278.45 16 255348 255349 278.45 24 255648 255649 342.25 16 255948 255949 322.555 5⁄32 .1562 16 255150 255151 304.50 16 255350 255351 304.50 24 255650 255651 350.15 16 255950 255951 333.205 3⁄16 .1875 16 255152 255153 311.85 16 255352 255353 311.85 24 255652 255653 374.75 16 255952 255953 351.35

5 7⁄32 .2188 16 255154 255155 335.10 16 255354 255355 335.10 24 255654 255655 385.40 16 255954 255955 369.405 ¼ .2500 16 255156 255157 349.60 16 255356 255357 349.60 24 255656 255657 402.00 16 255956 255957 387.305 5⁄16 .3125 16 255158 255159 380.10 16 255358 255359 380.10 24 255658 255659 437.20 16 255958 255959 417.955 3⁄8 .3750 16 255160 255161 410.80 16 255360 255361 410.80 24 255660 255661 472.35 16 255960 255961 450.45

5 7⁄16 .4375 - - - - - - - - 24 255662 - 524.90 16 255962 - 475.855 ½ .5000 - - - - - - - - 24 255664 - 583.20 16 255964 - 501.206 5⁄64 .0781 18 255166 255167 410.75 18 255366 255367 410.75 28 255666 255667 472.30 18 255966 255967 435.506 3⁄32 .0938 18 255168 255169 365.80 18 255368 255369 365.80 28 255668 255669 432.70 18 255968 255969 401.05

6 7⁄64 .1094 18 255170 255171 412.15 18 255370 255371 412.15 28 255670 255671 473.95 18 255970 255971 437.006 1⁄8 .1250 18 255172 255173 348.65 18 255372 255373 348.65 28 255672 255673 454.00 18 255972 255973 412.556 5⁄32 .1562 18 255174 255175 394.50 18 255374 255375 394.50 28 255674 255675 453.80 18 255974 255975 430.556 3⁄16 .1875 18 255176 255177 381.95 18 255376 255377 381.95 28 255676 255677 486.80 18 255976 255977 448.55

6 7⁄32 .2188 18 255178 255179 430.55 18 255378 255379 430.55 28 255678 255679 495.20 18 255978 255979 466.606 ¼ .2500 18 255180 255181 448.60 18 255380 255381 448.60 28 255680 255681 529.30 18 255980 255981 491.506 5⁄16 .3125 18 255182 255183 466.70 18 255382 255383 466.70 28 255682 255683 536.70 18 255982 255983 513.456 3⁄8 .3750 18 255184 255185 484.65 18 255384 255385 484.65 28 255684 255685 557.30 18 255984 255985 533.25

6 7⁄16 .4375 - - - - - - - - 28 255690 - 619.15 18 255990 - 558.606 ½ .5000 - - - - - - - - 28 255692 - 688.00 18 255992 - 584.058 1⁄8 .1250 24 - 255186 578.85 24 - 255386 578.85 24 - 255686 611.90 24 - 255986 611.908 5⁄32 .1562 24 - 255187 585.75 24 - 255387 585.75 24 - 255687 618.85 24 - 255987 618.85

8 3⁄16 .1875 24 - 255188 592.65 24 - 255388 592.65 24 - 255688 625.70 24 - 255988 625.708 ¼ .2500 24 - 255189 628.40 24 - 255389 628.40 24 - 255689 661.55 24 - 255989 661.55

SLITTING SAWS - STANDARD TOOTH CARBIDE TIPPED - FOUR TYPES - NON-FERROUS, CAST IRON,


TYPE 2551 - FOR NON-FERROUSSimilar to our Type 2550.Except designed with more teeth for better ^nishes.

TYPE 2553 - FOR CAST IRONSimilar to our Type 2552.Except designed with more teeth for better ^nishes.

TYPE 2556 - FOR STEELSimilar to our Type 2554.Except designed with more teeth for better ^nishes.

TYPE 2559 - FOR HIGH TEMP ALLOYSimilar to our Type 2558.Except designed with more teeth for better ^nishes.

MADE IN USA


TYPE 2556 – FOR STEELCutter Notes (All cutters on page)

16 Teeth

C-5 Carbide

1° - 3° Positve Radial Rake

Width Tolerance: +.001”/-.000”

OD tolerance: +.0313”/-.000”

1” Arbor hole +.001”/-.000”

ANSI standard keyway dimensions

Add 5% to grind the hub width thinner

Add 5% to match OD’s on cutter sets within .001”

Not designed to be used on heat treated materials

greater than 475 Brinell (50Rc)

Corner Radius or Chamfer on ONE Side

Corner Radius or Chamfer on BOTH Sides OR a Full Radius

Radius

Left Side

Chamfer

Right Side

Radius

Right Side

Chamfer

Left Side

Width

Grind

3” CARBIDE TIPPED MILLING CUTTERS

FOR STEEL

TOOL

DIAM.

DECIMAL SIZE

WIDTH RANGE

1” ARBOR

EDP NO.

HUB

WIDTH


1 PC. 2 PC. 3 PC. 4 PC. 5 PC. 6 PC.

3 0.0600 - 0.0703 255698D .0555 $312.40 $291.30 $287.35 $285.40 $284.20 $256.403 0.0704 - 0.0859 255600D .0711 365.95 344.85 341.00 339.10 337.90 310.053 0.0860 - 0.1015 255602D .0867 312.40 291.30 287.35 285.40 284.20 256.403 0.1016 - 0.1171 255604D .1024 292.50 271.35 267.50 265.60 264.35 236.60

3 0.1172 - 0.1406 255606D .1180 270.30 249.20 245.35 243.45 242.15 214.403 0.1407 - 0.1718 255608D .1562 281.15 260.05 256.20 254.25 252.95 225.203 0.1719 - 0.2031 255609D .1875 292.00 270.90 267.05 265.10 263.85 236.053 0.2032 - 0.2343 255610D .2188 302.80 281.70 277.90 275.90 274.70 246.85

3 0.2344 - 0.2812 255611D .2500 313.70 292.60 288.75 286.85 285.55 257.803 0.2813 - 0.3437 255612D .3125 338.55 317.40 313.60 311.65 310.40 282.653 0.3438 - 0.4062 255613D .3750 363.55 342.45 338.55 336.60 335.35 307.553 0.4063 - 0.4687 255614D .4375 397.65 376.55 372.75 370.80 369.55 341.75

3 0.4688 - 0.5312 255615D .5000 435.65 414.55 410.75 408.80 407.55 379.75

Width grinds between .0600” and .5312”

TOOL

DIAM.

DECIMAL SIZE

WIDTH RANGE

1” ARBOR

EDP NO.

HUB

WIDTH

PRICE EACH - FINISHED WITH RADIUS OR CHAMFER

1 PC. 2 PC. 3 PC. 4 PC. 5 PC. 6 PC.

3 0.0600 - 0.0703 255698R1 .0555 $326.50 $295.60 $291.30 $289.05 $287.70 $287.003 0.0704 - 0.0859 255600R1 .0711 380.15 349.20 344.90 342.70 341.35 340.653 0.0860 - 0.1015 255602R1 .0867 326.50 295.60 291.30 289.05 287.70 287.003 0.1016 - 0.1171 255604R1 .1024 306.65 275.70 271.40 269.20 267.85 267.10

3 0.1172 - 0.1406 255606R1 .1180 284.45 253.55 249.25 247.05 245.65 244.903 0.1407 - 0.1718 255608R1 .1562 295.25 264.40 260.10 257.90 256.45 255.803 0.1719 - 0.2031 255609R1 .1875 306.15 275.25 270.95 268.70 267.35 266.653 0.2032 - 0.2343 255610R1 .2188 317.00 286.05 281.75 279.50 278.20 277.45

3 0.2344 - 0.2812 255611R1 .2500 327.85 296.95 292.65 290.45 289.05 288.303 0.2813 - 0.3437 255612R1 .3125 352.70 321.75 317.45 315.25 313.90 313.203 0.3438 - 0.4062 255613R1 .3750 377.60 346.80 342.50 340.25 338.85 338.153 0.4063 - 0.4687 255614R1 .4375 411.85 380.90 376.60 374.40 373.05 372.40

3 0.4688 - 0.5312 255615R1 .5000 449.85 418.95 414.65 412.45 411.00 410.40

TOOL

DIAM.

DECIMAL SIZE

WIDTH RANGE

1” ARBOR

EDP NO.

HUB

WIDTH

PRICE EACH FINISHED WITH RADII, CHAMFERS OR COMBO

1 PC. 2 PC. 3 PC. 4 PC. 5 PC. 6 PC.

3 0.0600 - 0.0703 255698R2 .0555 $334.25 $300.00 $295.15 $292.65 $291.20 $290.403 0.0704 - 0.0859 255600R2 .0711 387.95 353.60 348.75 346.30 344.80 343.953 0.0860 - 0.1015 255602R2 .0867 334.25 300.00 295.15 292.65 291.20 290.403 0.1016 - 0.1171 255604R2 .1024 314.40 280.10 275.25 272.80 271.30 270.50

3 0.1172 - 0.1406 255606R2 .1180 292.25 257.90 253.10 250.65 249.10 248.303 0.1407 - 0.1718 255608R2 .1562 303.05 268.70 263.95 261.50 259.95 259.153 0.1719 - 0.2031 255609R2 .1875 313.90 279.60 274.80 272.35 270.80 270.053 0.2032 - 0.2343 255610R2 .2188 324.80 290.45 285.60 283.15 281.65 280.80

3 0.2344 - 0.2812 255611R2 .2500 335.65 301.30 296.50 294.05 292.50 291.703 0.2813 - 0.3437 255612R2 .3125 360.50 326.15 321.35 318.85 317.35 316.553 0.3438 - 0.4062 255613R2 .3750 385.40 351.05 346.30 343.85 342.35 341.553 0.4063 - 0.4687 255614R2 .4375 419.65 385.30 380.50 378.05 376.50 375.70

3 0.4688 - 0.5312 255615R2 .5000 457.65 423.25 418.50 416.05 414.50 413.70

Radius Notes

Maximum radius on one side is .2656”

Full radius and maximum radius on both

sides is ½ the width of the cutter

A non-tangent radii must be quoted

Chamfer Notes

Chamfer Angles can range from 0º to 45º

Chamfer is measured o\ of the OD

Maximum chamfer is the LESSER of 1⁄3 the

width of the cutter OR .2656” length of

angle when measured across the OD

Chamfer Angle Tolerance: +⁄- ½º

Chamfers greater than 45º must be quoted

Specify side for radius or chamfer

Alternating Chamfers add 5%

Radius Right

Side Chamfer

Left Side

Alternating

Right Left

Chamfer

Chamfer

Both Sides

Triple Tooth

Grind

Radius Left

Side Chamfer

Right Side

Full RadiusRadius

Both Sides

Alternating

Chamfer

Both Sides

MADE IN USA



20 Teeth

C-5 Carbide



OD tolerance: +.0313”/-.000”

1” Arbor hole +.001”/-.000”








Radius

Left Side

Chamfer

Right Side

Radius

Right Side

Chamfer

Left Side

Width

Grind


FOR STEEL

TOOL

DIAM.

DECIMAL SIZE

WIDTH RANGE

1” ARBOR

EDP NO.

HUB

WIDTH


1 PC. 2 PC. 3 PC. 4 PC. 5 PC. 6 PC.

4 0.0600 - 0.0703 255616D .0545 $376.05 $351.65 $347.10 $344.70 $343.30 $310.054 0.0704 - 0.0859 255618D .0701 405.20 380.85 376.25 373.90 372.50 339.254 0.0860 - 0.1015 255620D .0858 376.05 351.65 347.10 344.70 343.30 310.054 0.1016 - 0.1171 255622D .1014 359.25 334.85 330.30 327.90 326.45 293.20

4 0.1172 - 0.1406 255624D .1170 339.85 315.45 310.90 308.50 307.15 273.854 0.1407 - 0.1718 255626D .1562 360.30 335.90 331.35 328.95 327.55 294.304 0.1719 - 0.2031 255628D .1875 361.45 337.10 332.50 330.15 328.65 295.404 0.2032 - 0.2343 255630D .2188 378.90 354.55 349.95 347.55 346.20 312.95

4 0.2344 - 0.2812 255632D .2500 383.00 358.60 354.05 351.65 350.30 317.004 0.2813 - 0.3437 255634D .3125 409.90 385.60 380.95 378.65 377.20 343.954 0.3438 - 0.4062 255636D .3750 434.85 410.50 405.95 403.55 402.05 368.854 0.4063 - 0.4687 255638D .4375 475.85 451.45 446.90 444.45 443.05 409.80

4 0.4688 - 0.5312 255640D .5000 521.35 497.05 492.40 490.05 488.60 455.40


TOOL

DIAM.

DECIMAL SIZE

WIDTH RANGE

1” ARBOR

EDP NO.

HUB

WIDTH


1 PC. 2 PC. 3 PC. 4 PC. 5 PC. 6 PC.

4 0.0600 - 0.0703 255616R1 .0545 $391.30 $356.35 $351.35 $348.65 $347.05 $346.204 0.0704 - 0.0859 255618R1 .0701 420.50 385.60 380.50 377.80 376.25 375.354 0.0860 - 0.1015 255620R1 .0858 391.30 356.35 351.35 348.65 347.05 346.204 0.1016 - 0.1171 255622R1 .1014 374.45 339.55 334.55 331.85 330.25 329.40

4 0.1172 - 0.1406 255624R1 .1170 355.10 320.25 315.15 312.50 310.85 310.054 0.1407 - 0.1718 255626R1 .1562 375.55 340.65 335.60 332.90 331.35 330.454 0.1719 - 0.2031 255628R1 .1875 376.65 341.80 336.75 334.05 332.45 331.604 0.2032 - 0.2343 255630R1 .2188 394.20 359.30 354.20 351.55 349.95 349.10

4 0.2344 - 0.2812 255632R1 .2500 398.25 363.30 358.30 355.65 354.00 353.154 0.2813 - 0.3437 255634R1 .3125 425.20 390.35 385.20 382.55 380.95 380.104 0.3438 - 0.4062 255636R1 .3750 450.10 415.20 410.05 407.40 405.85 404.954 0.4063 - 0.4687 255638R1 .4375 491.05 456.15 451.10 448.45 446.80 446.00

4 0.4688 - 0.5312 255640R1 .5000 536.60 501.75 496.60 493.95 492.35 491.50

TOOL

DIAM.

DECIMAL SIZE

WIDTH RANGE

1” ARBOR

EDP NO.

HUB

WIDTH


1 PC. 2 PC. 3 PC. 4 PC. 5 PC. 6 PC.

4 0.0600 - 0.0703 255616R2 .0545 $399.60 $361.10 $355.50 $352.60 $350.80 $349.854 0.0704 - 0.0859 255618R2 .0701 428.75 390.35 384.75 381.75 380.00 379.054 0.0860 - 0.1015 255620R2 .0858 399.60 361.10 355.50 352.60 350.80 349.854 0.1016 - 0.1171 255622R2 .1014 382.80 344.30 338.65 335.80 334.00 333.05

4 0.1172 - 0.1406 255624R2 .1170 363.45 324.95 319.40 316.40 314.65 313.704 0.1407 - 0.1718 255626R2 .1562 383.90 345.35 339.80 336.85 335.05 334.104 0.1719 - 0.2031 255628R2 .1875 385.05 346.50 340.90 338.05 336.25 335.304 0.2032 - 0.2343 255630R2 .2188 402.55 364.00 358.45 355.45 353.70 352.75

4 0.2344 - 0.2812 255632R2 .2500 406.55 368.10 362.50 359.55 357.75 356.854 0.2813 - 0.3437 255634R2 .3125 433.55 395.05 389.45 386.50 384.80 383.754 0.3438 - 0.4062 255636R2 .3750 458.40 419.90 414.30 411.40 409.65 408.704 0.4063 - 0.4687 255638R2 .4375 499.40 460.90 455.25 452.35 450.60 449.65

4 0.4688 - 0.5312 255640R2 .5000 544.95 506.45 500.85 497.90 496.20 495.25

Radius Notes





Chamfer Notes










Radius Right

Side Chamfer

Left Side

Alternating

Right Left

Chamfer

Chamfer

Both Sides

Triple Tooth

Grind

Radius Left

Side Chamfer

Right Side

Full RadiusRadius

Both Sides

Alternating

Chamfer

Both Sides

MADE IN USA



24 Teeth

C-5 Carbide



OD tolerance: +.0313”/-.000”

1” Arbor hole +.001”/-.000”








Radius

Left Side

Chamfer

Right Side

Radius

Right Side

Chamfer

Left Side

Width

Grind


FOR STEEL

TOOL

DIAM.

DECIMAL SIZE

WIDTH RANGE

1” ARBOR

EDP NO.

HUB

WIDTH


1 PC. 2 PC. 3 PC. 4 PC. 5 PC. 6 PC.

5 0.0704 - 0.0859 255642D .0691 $487.55 $462.70 $458.05 $455.55 $454.10 $420.105 0.0860 - 0.1015 255644D .0848 490.50 465.60 460.95 458.50 457.05 423.055 0.1016 - 0.1171 255646D .1004 462.10 437.25 432.60 430.10 428.65 394.705 0.1172 - 0.1406 255648D .1160 409.70 384.85 380.15 377.70 376.25 342.25

5 0.1407 - 0.1718 255650D .1562 417.60 392.75 388.05 385.60 384.15 350.155 0.1719 - 0.2031 255652D .1875 442.20 417.30 412.65 410.20 408.75 374.755 0.2032 - 0.2343 255654D .2188 452.90 428.05 423.25 420.85 419.40 385.405 0.2344 - 0.2812 255656D .2500 469.45 444.55 439.85 437.45 436.00 402.00

5 0.2813 - 0.3437 255658D .3125 504.60 479.75 475.05 472.65 471.10 437.205 0.3438 - 0.4062 255660D .3750 539.85 515.00 510.25 507.85 506.35 472.405 0.4063 - 0.4687 255662D .4375 592.35 567.45 562.80 560.30 558.90 524.905 0.4688 - 0.5312 255664D .5000 650.70 625.75 621.10 618.65 617.25 583.20


TOOL

DIAM.

DECIMAL SIZE

WIDTH RANGE

1” ARBOR

EDP NO.

HUB

WIDTH


1 PC. 2 PC. 3 PC. 4 PC. 5 PC. 6 PC.

5 0.0704 - 0.0859 255642R1 .0691 $503.00 $467.40 $462.20 $459.50 $457.85 $457.005 0.0860 - 0.1015 255644R1 .0848 506.00 470.40 465.20 462.50 460.85 459.955 0.1016 - 0.1171 255646R1 .1004 477.60 441.95 436.75 434.05 432.50 431.605 0.1172 - 0.1406 255648R1 .1160 425.15 389.55 384.30 381.65 380.00 379.15

5 0.1407 - 0.1718 255650R1 .1562 433.05 397.45 392.25 389.55 387.95 387.055 0.1719 - 0.2031 255652R1 .1875 457.65 422.05 416.90 414.15 412.55 411.655 0.2032 - 0.2343 255654R1 .2188 468.35 432.75 427.50 424.85 423.15 422.305 0.2344 - 0.2812 255656R1 .2500 484.95 449.35 444.10 441.40 439.75 438.85

5 0.2813 - 0.3437 255658R1 .3125 520.10 484.45 479.30 476.60 474.95 474.105 0.3438 - 0.4062 255660R1 .3750 555.35 519.70 514.45 511.75 510.10 509.305 0.4063 - 0.4687 255662R1 .4375 607.80 572.20 567.00 564.30 562.70 561.805 0.4688 - 0.5312 255664R1 .5000 666.10 630.50 625.30 622.60 621.00 620.10

TOOL

DIAM.

DECIMAL SIZE

WIDTH RANGE

1” ARBOR

EDP NO.

HUB

WIDTH


1 PC. 2 PC. 3 PC. 4 PC. 5 PC. 6 PC.

5 0.0704 - 0.0859 255642R2 .0691 519.60 $476.85 $470.65 $467.40 $465.45 $464.405 0.0860 - 0.1015 255644R2 .0848 522.60 479.80 473.60 470.30 468.35 467.355 0.1016 - 0.1171 255646R2 .1004 494.15 451.45 445.20 441.90 439.95 438.955 0.1172 - 0.1406 255648R2 .1160 441.75 399.00 392.80 389.50 387.55 386.55

5 0.1407 - 0.1718 255650R2 .1562 449.65 406.95 400.70 397.40 395.45 394.455 0.1719 - 0.2031 255652R2 .1875 474.25 431.55 425.25 422.05 420.10 419.005 0.2032 - 0.2343 255654R2 .2188 484.95 442.20 436.00 432.70 430.75 429.655 0.2344 - 0.2812 255656R2 .2500 501.50 458.75 452.50 449.30 447.30 446.25

5 0.2813 - 0.3437 255658R2 .3125 536.70 493.95 487.70 484.40 482.50 481.455 0.3438 - 0.4062 255660R2 .3750 571.85 529.15 522.90 519.65 517.70 516.655 0.4063 - 0.4687 255662R2 .4375 624.40 581.70 575.40 572.15 570.15 569.155 0.4688 - 0.5312 255664R2 .5000 682.70 640.00 633.70 630.45 628.55 627.50

Radius Notes





Chamfer Notes










Radius Right

Side Chamfer

Left Side

Alternating

Right Left

Chamfer

Chamfer

Both Sides

Triple Tooth

Grind

Radius Left

Side Chamfer

Right Side

Full RadiusRadius

Both Sides

Alternating

Chamfer

Both Sides

MADE IN USA



28 Teeth

C-5 Carbide



OD tolerance: +.0313”/-.000”

1” Arbor hole +.001”/-.000”








Radius

Left Side

Chamfer

Right Side

Radius

Right Side

Chamfer

Left Side

Width

Grind


FOR STEEL

TOOL

DIAM.

DECIMAL SIZE

WIDTH RANGE

1” ARBOR

EDP NO.

HUB

WIDTH


1 PC. 2 PC. 3 PC. 4 PC. 5 PC. 6 PC.

6 0.0704 - 0.0859 255666D .0681 547.90 520.60 515.30 512.50 510.90 472.306 0.0860 - 0.1015 255668D .0838 508.30 481.00 475.70 472.90 471.30 432.706 0.1016 - 0.1171 255670D .0994 549.55 522.20 516.90 514.15 512.45 473.956 0.1172 - 0.1406 255672D .1150 529.65 502.30 497.05 494.20 492.60 454.00

6 0.1407 - 0.1718 255674D .1562 529.40 502.00 496.70 493.95 492.30 453.806 0.1719 - 0.2031 255676D .1875 562.45 535.15 529.85 527.10 525.40 486.806 0.2032 - 0.2343 255678D .2188 570.80 543.45 538.20 535.40 533.75 495.206 0.2344 - 0.2812 255680D .2500 605.00 577.60 572.30 569.55 567.90 529.30

6 0.2813 - 0.3437 255682D .3125 612.30 584.95 579.65 576.85 575.25 536.706 0.3438 - 0.4062 255684D .3750 632.95 605.50 600.20 597.45 595.85 557.306 0.4063 - 0.4687 255690D .4375 694.85 667.50 662.20 659.35 657.80 619.156 0.4688 - 0.5312 255692D .5000 763.60 736.35 731.05 728.20 726.60 688.00


TOOL

DIAM.

DECIMAL SIZE

WIDTH RANGE

1” ARBOR

EDP NO.

HUB

WIDTH


1 PC. 2 PC. 3 PC. 4 PC. 5 PC. 6 PC.

6 0.0704 - 0.0859 255666R1 .0681 564.25 525.75 519.90 516.80 515.00 514.006 0.0860 - 0.1015 255668R1 .0838 524.60 486.15 480.30 477.20 475.35 474.356 0.1016 - 0.1171 255670R1 .0994 565.85 527.35 521.50 518.45 516.60 515.606 0.1172 - 0.1406 255672R1 .1150 545.90 507.50 501.60 498.50 496.65 495.65

6 0.1407 - 0.1718 255674R1 .1562 545.70 507.20 501.35 498.30 496.45 495.456 0.1719 - 0.2031 255676R1 .1875 578.75 540.30 534.40 531.30 529.50 528.506 0.2032 - 0.2343 255678R1 .2188 587.15 548.65 542.75 539.70 537.85 536.856 0.2344 - 0.2812 255680R1 .2500 621.25 582.80 576.85 573.85 572.05 571.00

6 0.2813 - 0.3437 255682R1 .3125 628.65 590.10 584.25 581.20 579.40 578.406 0.3438 - 0.4062 255684R1 .3750 649.20 610.70 604.85 601.80 599.95 598.956 0.4063 - 0.4687 255690R1 .4375 711.15 672.60 666.75 663.65 661.90 660.906 0.4688 - 0.5312 255692R1 .5000 779.95 741.45 735.60 732.50 730.65 729.70

TOOL

DIAM.

DECIMAL SIZE

WIDTH RANGE

1” ARBOR

EDP NO.

HUB

WIDTH


1 PC. 2 PC. 3 PC. 4 PC. 5 PC. 6 PC.

6 0.0704 - 0.0859 255666R2 .0681 581.95 536.05 529.00 525.40 523.20 522.056 0.0860 - 0.1015 255668R2 .0838 542.30 496.40 489.40 485.75 483.55 482.406 0.1016 - 0.1171 255670R2 .0994 583.55 537.65 530.65 526.95 524.85 523.606 0.1172 - 0.1406 255672R2 .1150 563.60 517.70 510.70 507.05 504.95 503.70

6 0.1407 - 0.1718 255674R2 .1562 563.40 517.50 510.50 506.80 504.65 503.456 0.1719 - 0.2031 255676R2 .1875 596.45 550.55 543.50 539.85 537.75 536.506 0.2032 - 0.2343 255678R2 .2188 604.80 558.90 551.90 548.25 546.10 544.906 0.2344 - 0.2812 255680R2 .2500 638.90 593.00 586.05 582.35 580.20 579.00

6 0.2813 - 0.3437 255682R2 .3125 646.35 600.40 593.40 589.75 587.60 586.406 0.3438 - 0.4062 255684R2 .3750 666.90 621.00 614.00 610.30 608.20 606.956 0.4063 - 0.4687 255690R2 .4375 728.80 682.90 675.90 672.25 670.10 668.906 0.4688 - 0.5312 255692R2 .5000 797.65 751.70 744.70 741.05 738.95 737.70

Radius Notes





Chamfer Notes










Radius Right

Side Chamfer

Left Side

Alternating

Right Left

Chamfer

Chamfer

Both Sides

Triple Tooth

Grind

Radius Left

Side Chamfer

Right Side

Full RadiusRadius

Both Sides

Alternating

Chamfer

Both Sides

MADE IN USA

PHONE (800) 345-8924 FAX (800) 867-9312 ROCK RIVER TOOL, INC.www.rockrivertool.com 101

TYPE 2559 – MULTI-PURPOSECutter Notes (All cutters on page)

12 Teeth

C-2(m) Carbide

5° Positve Radial Rake


OD tolerance: +.0313”/-.000”

1” Arbor hole +.001”/-.000”








Radius

Left Side

Chamfer

Right Side

Radius

Right Side

Chamfer

Left Side

Width

Grind


TOOL

DIAM.

DECIMAL SIZE

WIDTH RANGE

1” ARBOR

EDP NO.

HUB

WIDTH


1 PC. 2 PC. 3 PC. 4 PC. 5 PC. 6 PC.

3 0.0600 - 0.0703 255998D .0555 $296.55 $275.10 $271.40 $269.45 $268.30 $241.203 0.0704 - 0.0859 255900D .0711 325.55 304.10 300.40 298.45 297.20 270.203 0.0860 - 0.1015 255902D .0867 296.55 275.10 271.40 269.45 268.30 241.203 0.1016 - 0.1171 255904D .1024 285.55 264.20 260.45 258.50 257.30 230.25

3 0.1172 - 0.1406 255906D .1180 275.25 253.80 250.05 248.10 246.95 219.903 0.1407 - 0.1718 255908D .1562 280.55 259.20 255.45 253.50 252.35 225.203 0.1719 - 0.2031 255909D .1875 285.95 264.50 260.75 258.85 257.70 230.603 0.2032 - 0.2343 255910D .2188 293.20 271.90 268.15 266.15 265.00 237.90

3 0.2344 - 0.2812 255911D .2500 300.50 279.10 275.30 273.35 272.20 245.053 0.2813 - 0.3437 255912D .3125 323.85 302.45 298.70 296.80 295.65 268.453 0.3438 - 0.4062 255913D .3750 349.00 327.60 323.85 321.85 320.70 293.653 0.4063 - 0.4687 255914D .4375 374.40 353.00 349.25 347.30 346.15 319.10

3 0.4688 - 0.5312 255915D .5000 399.85 378.40 374.65 372.75 371.60 344.40


TOOL

DIAM.

DECIMAL SIZE

WIDTH RANGE

1” ARBOR

EDP NO.

HUB

WIDTH


1 PC. 2 PC. 3 PC. 4 PC. 5 PC. 6 PC.

3 0.0600 - 0.0703 255998R1 .0555 $311.00 $279.35 $275.10 $273.00 $271.70 $271.053 0.0704 - 0.0859 255900R1 .0711 340.05 308.35 304.10 301.95 300.65 300.003 0.0860 - 0.1015 255902R1 .0867 311.00 279.35 275.10 273.00 271.70 271.053 0.1016 - 0.1171 255904R1 .1024 300.10 268.40 264.20 262.05 260.70 260.00

3 0.1172 - 0.1406 255906R1 .1180 289.70 258.00 253.80 251.65 250.35 249.653 0.1407 - 0.1718 255908R1 .1562 295.05 263.40 259.20 257.00 255.70 255.003 0.1719 - 0.2031 255909R1 .1875 300.45 268.70 264.50 262.40 261.15 260.403 0.2032 - 0.2343 255910R1 .2188 307.70 276.10 271.90 269.65 268.40 267.65

3 0.2344 - 0.2812 255911R1 .2500 314.95 283.25 279.10 276.90 275.60 274.903 0.2813 - 0.3437 255912R1 .3125 338.35 306.70 302.45 300.30 299.05 298.253 0.3438 - 0.4062 255913R1 .3750 363.55 331.80 327.60 325.40 324.15 323.453 0.4063 - 0.4687 255914R1 .4375 388.90 357.20 353.00 350.85 349.60 348.85

3 0.4688 - 0.5312 255915R1 .5000 414.30 382.60 378.40 376.30 374.90 374.25

TOOL

DIAM.

DECIMAL SIZE

WIDTH RANGE

1” ARBOR

EDP NO.

HUB

WIDTH


1 PC. 2 PC. 3 PC. 4 PC. 5 PC. 6 PC.

3 0.0600 - 0.0703 255998R2 .0555 $318.75 $283.60 $279.00 $276.50 $275.05 $274.303 0.0704 - 0.0859 255900R2 .0711 347.80 312.60 307.95 305.50 304.00 303.203 0.0860 - 0.1015 255902R2 .0867 318.75 283.60 279.00 276.50 275.05 274.303 0.1016 - 0.1171 255904R2 .1024 307.90 272.65 268.00 265.60 264.10 263.35

3 0.1172 - 0.1406 255906R2 .1180 297.50 262.30 257.60 255.20 253.70 252.953 0.1407 - 0.1718 255908R2 .1562 302.85 267.60 262.95 260.55 259.10 258.303 0.1719 - 0.2031 255909R2 .1875 308.15 273.00 268.35 265.90 264.45 263.703 0.2032 - 0.2343 255910R2 .2188 315.55 280.30 275.65 273.25 271.75 271.05

3 0.2344 - 0.2812 255911R2 .2500 322.70 287.45 282.85 280.40 279.00 278.203 0.2813 - 0.3437 255912R2 .3125 346.10 310.90 306.20 303.85 302.40 301.603 0.3438 - 0.4062 255913R2 .3750 371.30 336.05 331.40 329.00 327.50 326.753 0.4063 - 0.4687 255914R2 .4375 396.60 361.50 356.85 354.35 352.95 352.15

3 0.4688 - 0.5312 255915R2 .5000 422.05 386.95 382.20 379.80 378.35 377.55

Radius Notes





Chamfer Notes










Radius Right

Side Chamfer

Left Side

Alternating

Right Left

Chamfer

Chamfer

Both Sides

Triple Tooth

Grind

Radius Left

Side Chamfer

Right Side

Full RadiusRadius

Both Sides

Alternating

Chamfer

Both Sides

MADE IN USA



14 Teeth

C-2(m) Carbide



OD tolerance: +.0313”/-.000”

1” Arbor hole +.001”/-.000”








Radius

Left Side

Chamfer

Right Side

Radius

Right Side

Chamfer

Left Side

Width

Grind


TOOL

DIAM.

DECIMAL SIZE

WIDTH RANGE

1” ARBOR

EDP NO.

HUB

WIDTH


1 PC. 2 PC. 3 PC. 4 PC. 5 PC. 6 PC.

4 0.0600 - 0.0703 255916D .0545 $339.50 $314.95 $310.45 $308.15 $306.75 $274.354 0.0704 - 0.0859 255918D .0701 379.55 354.90 350.40 348.10 346.75 314.304 0.0860 - 0.1015 255920D .0858 339.50 314.95 310.45 308.15 306.75 274.354 0.1016 - 0.1171 255922D .1014 390.50 365.90 361.40 359.15 357.70 325.25

4 0.1172 - 0.1406 255924D .1170 339.15 314.50 309.95 307.65 306.30 273.904 0.1407 - 0.1718 255926D .1562 346.30 321.70 317.20 314.95 313.50 281.104 0.1719 - 0.2031 255928D .1875 355.25 330.65 326.15 323.90 322.45 290.054 0.2032 - 0.2343 255930D .2188 364.40 339.80 335.30 333.00 331.55 299.15

4 0.2344 - 0.2812 255932D .2500 371.60 346.95 342.45 340.15 338.70 306.354 0.2813 - 0.3437 255934D .3125 393.10 368.50 364.00 361.70 360.30 327.954 0.3438 - 0.4062 255936D .3750 418.40 393.80 389.30 387.00 385.50 353.104 0.4063 - 0.4687 255938D .4375 443.75 419.20 414.65 412.35 410.90 378.55

4 0.4688 - 0.5312 255940D .5000 469.20 444.50 440.05 437.75 436.35 403.95


TOOL

DIAM.

DECIMAL SIZE

WIDTH RANGE

1” ARBOR

EDP NO.

HUB

WIDTH


1 PC. 2 PC. 3 PC. 4 PC. 5 PC. 6 PC.

4 0.0600 - 0.0703 255916R1 .0545 $355.20 $319.55 $314.60 $311.95 $310.45 $309.654 0.0704 - 0.0859 255918R1 .0701 395.15 359.50 354.55 351.90 350.40 349.604 0.0860 - 0.1015 255920R1 .0858 355.20 319.55 314.60 311.95 310.45 309.654 0.1016 - 0.1171 255922R1 .1014 406.20 370.50 365.50 362.95 361.40 360.55

4 0.1172 - 0.1406 255924R1 .1170 354.80 319.10 314.10 311.55 309.95 309.154 0.1407 - 0.1718 255926R1 .1562 361.95 326.25 321.35 318.75 317.20 316.354 0.1719 - 0.2031 255928R1 .1875 370.95 335.30 330.30 327.70 326.15 325.304 0.2032 - 0.2343 255930R1 .2188 380.10 344.35 339.40 336.85 335.30 334.40

4 0.2344 - 0.2812 255932R1 .2500 387.20 351.55 346.55 343.95 342.45 341.604 0.2813 - 0.3437 255934R1 .3125 408.80 373.05 368.15 365.55 364.00 363.104 0.3438 - 0.4062 255936R1 .3750 434.00 398.35 393.35 390.75 389.30 388.404 0.4063 - 0.4687 255938R1 .4375 459.45 423.80 418.75 416.20 414.65 413.80

4 0.4688 - 0.5312 255940R1 .5000 484.85 449.20 444.20 441.60 440.05 439.25

TOOL

DIAM.

DECIMAL SIZE

WIDTH RANGE

1” ARBOR

EDP NO.

HUB

WIDTH


1 PC. 2 PC. 3 PC. 4 PC. 5 PC. 6 PC.

4 0.0600 - 0.0703 255916R2 .0545 $363.55 $324.20 $318.65 $315.85 $314.10 $313.204 0.0704 - 0.0859 255918R2 .0701 403.40 364.10 358.60 355.80 354.05 353.104 0.0860 - 0.1015 255920R2 .0858 363.55 324.20 318.65 315.85 314.10 313.204 0.1016 - 0.1171 255922R2 .1014 414.45 375.15 369.60 366.80 365.05 364.10

4 0.1172 - 0.1406 255924R2 .1170 363.00 323.70 318.20 315.35 313.65 312.704 0.1407 - 0.1718 255926R2 .1562 370.25 330.95 325.35 322.60 320.80 319.904 0.1719 - 0.2031 255928R2 .1875 379.25 339.90 334.40 331.55 329.75 328.954 0.2032 - 0.2343 255930R2 .2188 388.35 349.00 343.50 340.70 339.00 338.05

4 0.2344 - 0.2812 255932R2 .2500 395.45 356.15 350.65 347.80 346.10 345.154 0.2813 - 0.3437 255934R2 .3125 417.05 377.75 372.20 369.40 367.65 366.754 0.3438 - 0.4062 255936R2 .3750 442.30 402.95 397.45 394.65 392.95 392.004 0.4063 - 0.4687 255938R2 .4375 467.70 428.40 422.90 420.00 418.30 417.45

4 0.4688 - 0.5312 255940R2 .5000 493.10 453.85 448.25 445.40 443.70 442.75

Radius Notes





Chamfer Notes










Radius Right

Side Chamfer

Left Side

Alternating

Right Left

Chamfer

Chamfer

Both Sides

Triple Tooth

Grind

Radius Left

Side Chamfer

Right Side

Full RadiusRadius

Both Sides

Alternating

Chamfer

Both Sides

MADE IN USA



16 Teeth

C-2(m) Carbide



OD tolerance: +.0313”/-.000”

1” Arbor hole +.001”/-.000”








Radius

Left Side

Chamfer

Right Side

Radius

Right Side

Chamfer

Left Side

Width

Grind


TOOL

DIAM.

DECIMAL SIZE

WIDTH RANGE

1” ARBOR

EDP NO.

HUB

WIDTH


1 PC. 2 PC. 3 PC. 4 PC. 5 PC. 6 PC.

5 0.0704 - 0.0859 255942D .0691 $454.00 $428.75 $424.15 $421.85 $420.45 $387.255 0.0860 - 0.1015 255944D .0848 398.90 373.70 369.15 366.80 365.40 332.155 0.1016 - 0.1171 255946D .1004 432.00 406.85 402.20 399.90 398.45 365.355 0.1172 - 0.1406 255948D .1160 389.30 364.00 359.50 357.10 355.75 322.55

5 0.1407 - 0.1718 255950D .1562 399.95 374.75 370.25 367.80 366.40 333.205 0.1719 - 0.2031 255952D .1875 418.05 392.90 388.35 386.00 384.55 351.355 0.2032 - 0.2343 255954D .2188 436.15 410.90 406.35 404.00 402.55 369.405 0.2344 - 0.2812 255956D .2500 454.05 428.80 424.30 421.95 420.55 387.30

5 0.2813 - 0.3437 255958D .3125 484.65 459.45 454.90 452.50 451.10 417.955 0.3438 - 0.4062 255960D .3750 517.10 491.90 487.40 485.00 483.55 450.455 0.4063 - 0.4687 255962D .4375 542.50 517.35 512.85 510.45 509.00 475.855 0.4688 - 0.5312 255964D .5000 567.95 542.75 538.20 535.85 534.40 501.20


TOOL

DIAM.

DECIMAL SIZE

WIDTH RANGE

1” ARBOR

EDP NO.

HUB

WIDTH


1 PC. 2 PC. 3 PC. 4 PC. 5 PC. 6 PC.

5 0.0704 - 0.0859 255942R1 .0691 $469.80 $433.40 $428.35 $425.65 $424.05 $423.255 0.0860 - 0.1015 255944R1 .0848 414.80 378.35 373.25 370.65 369.05 368.155 0.1016 - 0.1171 255946R1 .1004 447.85 411.50 406.35 403.75 402.10 401.305 0.1172 - 0.1406 255948R1 .1160 405.10 368.65 363.65 360.95 359.40 358.55

5 0.1407 - 0.1718 255950R1 .1562 415.85 379.35 374.30 371.70 370.05 369.255 0.1719 - 0.2031 255952R1 .1875 433.90 397.50 392.40 389.75 388.20 387.305 0.2032 - 0.2343 255954R1 .2188 451.95 415.50 410.45 407.85 406.20 405.355 0.2344 - 0.2812 255956R1 .2500 469.90 433.55 428.40 425.80 424.15 423.30

5 0.2813 - 0.3437 255958R1 .3125 500.50 464.05 459.00 456.35 454.80 453.955 0.3438 - 0.4062 255960R1 .3750 532.95 496.55 491.45 488.80 487.30 486.455 0.4063 - 0.4687 255962R1 .4375 558.40 522.00 516.85 514.25 512.65 511.805 0.4688 - 0.5312 255964R1 .5000 583.75 547.40 542.30 539.70 538.00 537.20

TOOL

DIAM.

DECIMAL SIZE

WIDTH RANGE

1” ARBOR

EDP NO.

HUB

WIDTH


1 PC. 2 PC. 3 PC. 4 PC. 5 PC. 6 PC.

5 0.0704 - 0.0859 255942R2 .0691 $486.35 $442.65 $436.50 $433.35 $431.45 $430.455 0.0860 - 0.1015 255944R2 .0848 431.30 387.55 381.45 378.30 376.40 375.405 0.1016 - 0.1171 255946R2 .1004 464.35 420.65 414.55 411.40 409.55 408.455 0.1172 - 0.1406 255948R2 .1160 421.60 377.90 371.80 368.60 366.75 365.75

5 0.1407 - 0.1718 255950R2 .1562 432.30 388.60 382.50 379.35 377.45 376.405 0.1719 - 0.2031 255952R2 .1875 450.45 406.70 400.55 397.45 395.55 394.555 0.2032 - 0.2343 255954R2 .2188 468.40 424.80 418.65 415.50 413.60 412.605 0.2344 - 0.2812 255956R2 .2500 486.45 442.70 436.55 433.45 431.60 430.55

5 0.2813 - 0.3437 255958R2 .3125 516.95 473.30 467.20 464.00 462.10 461.105 0.3438 - 0.4062 255960R2 .3750 549.50 505.75 499.70 496.50 494.60 493.655 0.4063 - 0.4687 255962R2 .4375 574.95 531.15 525.05 521.95 520.05 519.055 0.4688 - 0.5312 255964R2 .5000 600.30 556.60 550.50 547.40 545.40 544.40

Radius Notes





Chamfer Notes










Radius Right

Side Chamfer

Left Side

Alternating

Right Left

Chamfer

Chamfer

Both Sides

Triple Tooth

Grind

Radius Left

Side Chamfer

Right Side

Full RadiusRadius

Both Sides

Alternating

Chamfer

Both Sides

MADE IN USA



18 Teeth

C-2(m) Carbide



OD tolerance: +.0313”/-.000”

1” Arbor hole +.001”/-.000”








Radius

Left Side

Chamfer

Right Side

Radius

Right Side

Chamfer

Left Side

Width

Grind


TOOL

DIAM.

DECIMAL SIZE

WIDTH RANGE

1” ARBOR

EDP NO.

HUB

WIDTH


1 PC. 2 PC. 3 PC. 4 PC. 5 PC. 6 PC.

6 0.0704 - 0.0859 255966D .0681 $505.20 $478.85 $474.10 $471.65 $470.10 $435.506 0.0860 - 0.1015 255968D .0838 470.70 444.40 439.65 437.20 435.65 401.056 0.1016 - 0.1171 255970D .0994 506.65 480.40 475.55 473.10 471.65 437.006 0.1172 - 0.1406 255972D .1150 482.15 455.90 451.10 448.60 447.15 412.55

6 0.1407 - 0.1718 255974D .1562 500.15 473.95 469.15 466.65 465.20 430.556 0.1719 - 0.2031 255976D .1875 518.25 491.90 487.25 484.65 483.15 448.556 0.2032 - 0.2343 255978D .2188 536.25 509.95 505.20 502.70 501.20 466.606 0.2344 - 0.2812 255980D .2500 561.15 534.90 530.05 527.60 526.15 491.50

6 0.2813 - 0.3437 255982D .3125 583.15 556.80 552.10 549.60 548.15 513.456 0.3438 - 0.4062 255984D .3750 602.90 576.55 571.85 569.35 567.85 533.206 0.4063 - 0.4687 255990D .4375 628.25 601.95 597.20 594.70 593.25 558.606 0.4688 - 0.5312 255992D .5000 653.65 627.40 622.60 620.15 618.65 584.05


TOOL

DIAM.

DECIMAL SIZE

WIDTH RANGE

1” ARBOR

EDP NO.

HUB

WIDTH


1 PC. 2 PC. 3 PC. 4 PC. 5 PC. 6 PC.

6 0.0704 - 0.0859 255966R1 .0681 $521.30 $483.45 $478.15 $475.45 $473.80 $472.906 0.0860 - 0.1015 255968R1 .0838 486.85 449.00 443.70 441.00 439.35 438.456 0.1016 - 0.1171 255970R1 .0994 522.85 484.95 479.65 476.90 475.25 474.406 0.1172 - 0.1406 255972R1 .1150 498.35 460.45 455.15 452.40 450.80 449.90

6 0.1407 - 0.1718 255974R1 .1562 516.40 478.55 473.20 470.55 468.85 467.956 0.1719 - 0.2031 255976R1 .1875 534.40 496.55 491.25 488.50 486.85 486.006 0.2032 - 0.2343 255978R1 .2188 552.40 514.60 509.35 506.50 504.95 504.056 0.2344 - 0.2812 255980R1 .2500 577.35 539.55 534.20 531.50 529.80 528.90

6 0.2813 - 0.3437 255982R1 .3125 599.30 561.50 556.25 553.45 551.80 550.906 0.3438 - 0.4062 255984R1 .3750 619.05 581.20 575.90 573.15 571.55 570.656 0.4063 - 0.4687 255990R1 .4375 644.45 606.65 601.35 598.60 596.90 596.056 0.4688 - 0.5312 255992R1 .5000 669.85 632.00 626.65 624.00 622.35 621.40

TOOL

DIAM.

DECIMAL SIZE

WIDTH RANGE

1” ARBOR

EDP NO.

HUB

WIDTH


1 PC. 2 PC. 3 PC. 4 PC. 5 PC. 6 PC.

6 0.0704 - 0.0859 255966R2 .0681 $537.85 $492.75 $486.45 $483.15 $481.15 $480.056 0.0860 - 0.1015 255968R2 .0838 503.40 458.30 451.95 448.65 446.70 445.606 0.1016 - 0.1171 255970R2 .0994 539.40 494.20 487.85 484.65 482.65 481.606 0.1172 - 0.1406 255972R2 .1150 514.90 469.75 463.40 460.15 458.20 457.10

6 0.1407 - 0.1718 255974R2 .1562 532.90 487.75 481.45 478.15 476.20 475.156 0.1719 - 0.2031 255976R2 .1875 550.90 505.75 499.45 496.25 494.30 493.206 0.2032 - 0.2343 255978R2 .2188 568.95 523.85 517.50 514.25 512.25 511.206 0.2344 - 0.2812 255980R2 .2500 593.85 548.70 542.40 539.10 537.15 536.15

6 0.2813 - 0.3437 255982R2 .3125 615.80 570.75 564.40 561.15 559.15 558.106 0.3438 - 0.4062 255984R2 .3750 635.50 590.40 584.10 580.90 578.90 577.856 0.4063 - 0.4687 255990R2 .4375 660.95 615.80 609.55 606.30 604.30 603.256 0.4688 - 0.5312 255992R2 .5000 686.40 641.25 634.95 631.75 629.75 628.65

Radius Notes





Chamfer Notes










Radius Right

Side Chamfer

Left Side

Alternating

Right Left

Chamfer

Chamfer

Both Sides

Triple Tooth

Grind

Radius Left

Side Chamfer

Right Side

Full RadiusRadius

Both Sides

Alternating

Chamfer

Both Sides

MADE IN USA


BRAZED SINGLE POINT TOOLS CARBIDE TIPPED - 883/PREMIUM C2 FOR CAST IRON & NON-FERROUS

370/PREMIUM C5-C6 FOR STEEL

FINISH GROUND - READY FOR USE

TOOL

STYLE

883/PREMIUM C2* 370/PREMIUM C5-C6* SHANK DIMENSIONS STD.

PKG.

QTY.EDP

NO.PRICE

EDP

NO.PRICE W H L

AR-4 211104 $10.20 211204 $7.45 ¼ ¼ 2 12AR-5 211105 9.00 211205 7.90 5⁄16 5⁄16 2 ¼ 12AR-6 211106 9.15 211206 8.05 3⁄8 3⁄8 2 ½ 12AR-7 211107 9.85 211207 8.75 7⁄16 7⁄16 3 12

AR-8 211108 8.45 211208 8.45 ½ ½ 3 ½ 12AR-10 211110 12.55 211210 11.60 5⁄8 5⁄8 4 12AR-12 211112 16.10 211212 14.45 ¾ ¾ 4 ½ 12AR-16 211116 29.55 211216 28.80 1 1 7 6

AR-20 211120 CALL US 211220 CALL US 1 ¼ 1 ¼ 8 1AR-44 211144 CALL US 211244 CALL US ½ 1 7 12

For turning wheresquare shoulder is

not required

For turning to asquare shoulder

For undercuttingand chamfering

For chamfering

0° SIDE CUTTING EDGE ANGLEFor machining to a square shoulder

0° SIDE CUTTING EDGE ANGLEFor machining to a square shoulder

*Some sizes not available in premium grade carbide. Prices subject to change.

15° SIDE CUTTING EDGE ANGLEFor interrupted or irregular cuts

15° SIDE CUTTING EDGE ANGLEFor interrupted or irregular cuts

0° SQUARE NOSENo nose radius

40° SIDE CUTTING EDGE ANGLE80° pointed nose

TOOL

STYLE


PKG.

QTY.EDP

NO.PRICE

EDP

NO.PRICE W H L

AL-4 211404 $10.20 211504 $7.45 ¼ ¼ 2 12AL-5 211405 9.00 211505 7.90 5⁄16 5⁄16 2 ¼ 12AL-6 211406 9.15 211506 8.05 3⁄8 3⁄8 2 ½ 12AL-7 211407 9.85 211507 8.75 7⁄16 7⁄16 3 12

AL-8 211408 8.45 211508 8.45 ½ ½ 3 ½ 12AL-10 211410 11.90 211510 11.60 5⁄8 5⁄8 4 12AL-12 211412 15.35 211512 15.25 ¾ ¾ 4 ½ 12AL-16 211416 29.95 211516 29.95 1 1 7 6

AL-20 - - 211520 CALL US 1 ¼ 1 ¼ 8 1AL-44 211444 CALL US 211544 CALL US ½ 1 7 12

TOOL

STYLE


PKG.

QTY.EDP

NO.PRICE

EDP

NO.PRICE W H L

BR-4 212104 $10.20 212204 $7.45 ¼ ¼ 2 12BR-5 212105 9.00 212205 7.90 5⁄16 5⁄16 2 ¼ 12BR-6 212106 9.15 212206 8.05 3⁄8 3⁄8 2 ½ 12BR-7 212107 9.85 212207 8.75 7⁄16 7⁄16 3 12

BR-8 212108 8.45 212208 8.45 ½ ½ 3 ½ 12BR-10 212110 12.55 212210 11.60 5⁄8 5⁄8 4 12BR-12 212112 16.10 212212 14.45 ¾ ¾ 4 ½ 12BR-16 212116 29.55 212216 28.80 1 1 7 6

BR-20 212120 CALL US 212220 CALL US 1 ¼ 1 ¼ 8 1BR-44 212144 CALL US 212244 CALL US ½ 1 7 12

TOOL

STYLE


PKG.

QTY.EDP

NO.PRICE

EDP

NO.PRICE W H L

BL-4 212404 $10.20 212504 $7.45 ¼ ¼ 2 12BL-5 212405 9.00 212505 7.90 5⁄16 5⁄16 2 ¼ 12BL-6 212406 9.15 212506 8.05 3⁄8 3⁄8 2 ½ 12BL-7 212407 9.85 212507 8.75 7⁄16 7⁄16 3 12

BL-8 212408 8.45 212508 8.45 ½ ½ 3 ½ 12BL-10 212410 11.90 212510 11.60 5⁄8 5⁄8 4 12BL-12 212412 15.35 212512 15.25 ¾ ¾ 4 ½ 12BL-16 212416 29.95 212516 29.95 1 1 7 6

BL-20 212420 CALL US 212520 CALL US 1 ¼ 1 ¼ 8 1BL-44 212444 CALL US 212544 CALL US ½ 1 7 12

TOOL

STYLE


PKG.

QTY.EDP

NO.PRICE

EDP

NO.PRICE W H L

C-4 213704 $6.70 213804 $6.70 ¼ ¼ 2 12C-5 213705 7.40 213805 7.15 5⁄16 5⁄16 2 ¼ 12C-6 213706 9.60 213806 7.90 3⁄8 3⁄8 2 ½ 12C-7 213707 7.30 213807 10.10 7⁄16 7⁄16 3 12

C-8 213708 11.75 213808 10.90 ½ ½ 3 ½ 12C-10 213710 13.25 213810 14.45 5⁄8 5⁄8 4 12C-12 213712 18.25 213812 20.70 ¾ ¾ 4 ½ 12C-16 213716 37.85 213816 36.40 1 1 7 6

C-20 213720 CALL US 213820 CALL US 1 ¼ 1 ¼ 8 1C-44 213744 CALL US 213844 CALL US ½ 1 7 12

TOOL

STYLE


PKG.

QTY.EDP

NO.PRICE

EDP

NO.PRICE W H L

D-4 214704 $6.25 214804 $6.25 ¼ ¼ 2 12D-5 214705 7.20 214805 7.45 5⁄16 5⁄16 2 ¼ 12D-6 214706 7.40 214806 7.95 3⁄8 3⁄8 2 ½ 12D-7 214707 10.10 214807 12.25 7⁄16 7⁄16 3 12

D-8 214708 9.70 214808 10.30 ½ ½ 3 ½ 12D-10 214710 13.55 214810 15.05 5⁄8 5⁄8 4 12D-12 214712 19.40 214812 17.05 ¾ ¾ 4 ½ 12D-16 214716 28.85 214816 29.75 1 1 7 6


*Some sizes not available in premium grade carbide. Prices subject to change. *Some sizes not available in premium grade carbide. Prices subject to change.



MADE IN USA


BRAZED SINGLE POINT TOOLS CARBIDE TIPPED - 883/PREMIUM C2 FOR CAST IRON & NON-FERROUS


FINISH GROUND - READY FOR USE

TOOL

STYLE


PKG.

QTY.EDP

NO.PRICE

EDP

NO.PRICE W H L

E-4 215704 $6.25 215804 $6.25 ¼ ¼ 2 12E-5 215705 6.80 215805 6.80 5⁄16 5⁄16 2 ¼ 12E-6 215706 7.10 215806 6.90 3⁄8 3⁄8 2 ½ 12E-7 215707 10.95 215807 13.15 7⁄16 7⁄16 3 12

E-8 215708 16.25 215808 8.70 ½ ½ 3 ½ 12E-10 215710 13.45 215810 12.20 5⁄8 5⁄8 4 12E-12 215712 16.75 215812 16.95 ¾ ¾ 4 ½ 12E-16 215716 29.35 215816 28.25 1 1 7 6

For cutting threads

For turning to asquare shoulder

30° SIDE CUTTING EDGE ANGLEO\set for threading or boring

0° END CUTTING EDGE ANGLEO\set for facing to a square shoulder or close to chuck jaws

TOOL

STYLE


PKG.

QTY.EDP

NO.PRICE

EDP

NO.PRICE W H L

ER-4 215104 $7.75 215204 $6.25 ¼ ¼ 2 12ER-5 215105 7.75 215205 6.95 5⁄16 5⁄16 2 ¼ 12ER-6 215106 7.85 215206 7.15 3⁄8 3⁄8 2 ½ 12ER-8 215108 13.90 215208 13.90 ½ ½ 3 ½ 12

ER-10 215110 15.15 215210 15.15 5⁄8 5⁄8 4 12ER-12 215112 16.40 215212 17.80 ¾ ¾ 4 ½ 12

TOOL

STYLE


PKG.

QTY.EDP

NO.PRICE

EDP

NO.PRICE W H L

FR-8 216108 $11.65 216208 $11.50 ½ ½ 3 ½ 12FR-10 216110 16.90 216210 16.05 5⁄8 5⁄8 4 12FR-12 216112 21.85 216212 21.55 ¾ ¾ 4 ½ 6FR-16 216116 45.70 216216 48.05 1 1 7 4

FR-44 216144 CALL US 216244 CALL US ½ 1 6 6

0° SIDE CUTTING EDGE ANGLEO\set for facing or turning to a square shoulder

or close to chuck jaws

TOOL

STYLE


PKG.

QTY.EDP

NO.PRICE

EDP

NO.PRICE W H L

GR-8 217108 $11.75 217208 $11.15 ½ ½ 3 ½ 12GR-10 217110 17.65 217210 16.05 5⁄8 5⁄8 4 12GR-12 217112 22.65 217212 20.05 ¾ ¾ 4 ½ 6GR-16 217116 47.75 217216 48.05 1 1 7 4

GR-20 217120 CALL US 217220 CALL US 1 ¼ 1 ¼ 8 1GR-44 217144 CALL US 217244 CALL US ½ 1 6 6

30° SIDE CUTTING EDGE ANGLEO\set for threading or boring

0° END CUTTING EDGE ANGLEO\set for facing to a square shoulder or close to chuck jaws

TOOL

STYLE


PKG.

QTY.EDP

NO.PRICE

EDP

NO.PRICE W H L

EL-4 215404 $8.90 215504 $6.25 ¼ ¼ 2 12EL-5 215405 8.90 215505 8.55 5⁄16 5⁄16 2 ¼ 12EL-6 215406 8.90 215506 8.65 3⁄8 3⁄8 2 ½ 12EL-8 215408 13.90 215508 15.30 ½ ½ 3 ½ 12

EL-10 215410 15.15 215510 16.70 5⁄8 5⁄8 4 12EL-12 215412 16.40 215512 17.80 ¾ ¾ 4 ½ 12

TOOL

STYLE


PKG.

QTY.EDP

NO.PRICE

EDP

NO.PRICE W H L

FL-8 216408 $11.75 216508 $11.15 ½ ½ 3 ½ 12FL-10 216410 17.65 216510 16.05 5⁄8 5⁄8 4 12FL-12 216412 22.65 216512 20.05 ¾ ¾ 4 ½ 6FL-16 216416 42.60 216516 48.05 1 1 7 4

FL-44 216444 CALL US 216544 CALL US ½ 1 6 6

0° SIDE CUTTING EDGE ANGLEO\set for facing or turning to a square shoulder

or close to chuck jaws

TOOL

STYLE


PKG.

QTY.EDP

NO.PRICE

EDP

NO.PRICE W H L

GL-8 217408 $11.65 217508 $11.50 ½ ½ 3 ½ 12GL-10 217410 16.90 217510 16.05 5⁄8 5⁄8 4 12GL-12 217412 21.85 217512 21.55 ¾ ¾ 4 ½ 6GL-16 217416 46.30 217516 48.05 1 1 7 4

GL-20 217420 CALL US 217520 CALL US 1 ¼ 1 ¼ 8 1GL-44 217444 CALL US 217544 CALL US ½ 1 6 6

60° INCLUDED ANGLE;

30° SIDE CUTTING EDGE ANGLEFor threading, chamfering, notching, or undercutting

For facing to asquare shoulder

For bore threading in a 90° bar

For cutting threads





MADE IN USA


BRAZED CUT-OFF TOOLS CARBIDE TIPPED - 883/PREMIUM C2 FOR CAST IRON & NON-FERROUS


TOOL

STYLE

CUT-

OFF

WIDTH

883/PREMIUM C2* 370/PREMIUM C5-C6* SHANK DIMENSIONS

EDP

NO.PRICE

EDP

NO.PRICE W H L

CT-111 1⁄8 210111 $15.10 210211 $15.70 ½ 1 5CT-122 3⁄16 210122 15.55 210222 16.00 ½ 1 5CT-121 ¼ 210133 16.05 210233 16.60 ½ 1 5CT-120 5⁄16 210144 16.00 210244 16.60 ½ 1 5

CT-130 3⁄8 210155 19.40 210255 20.65 5⁄8 1 ¼ 5CT-140 3⁄8 210166 21.50 210266 22.25 ¾ 1 ½ 6

STANDARD CUT-OFF TOOLFor stock cut-o\ of solid bars Finish ground - ready for use

Standard packaging quantity is 6

STANDARD CUT-OFF TOOLFor stock cut-o\ of solid bars Finish ground - ready for use

TOOL

STYLE

C2 CARBIDE* SHANK DIMENSIONS CARBIDE DIMENSIONS

EDP

NO.PRICE “W” “H” “L” “T” “D” “C”

SA6C 219921 $13.65 ¼ ¼ 6 1⁄8 3⁄32 1 ¼SA7C 219922 14.65 9⁄32 9⁄32 6 1⁄8 3⁄32 1 ¼SA8C 219923 15.95 5⁄16 5⁄16 6 1⁄8 3⁄32 1 ¼SA9C 219924 16.95 3⁄8 3⁄8 6 1⁄8 3⁄32 1 ¼

SA10C 219925 18.35 13⁄32 13⁄32 6 1⁄8 3⁄32 1 ¼SA11C 219926 19.05 7⁄16 7⁄16 6 3⁄32 1⁄8 1 ¼SA11.5C 219927 19.10 15⁄32 15⁄32 6 3⁄32 1⁄8 1 ¼SA12C 219928 20.30 ½ ½ 6 3⁄32 1⁄8 1 ¼

S.A. SERIES SWISS AUTOMATIC TOOLRequires ^nish grind for cut-o\, forming or turning


S.A. SERIES SWISS AUTOMATIC TOOLRequires ^nish grind for cut-o\, forming or turning

TOOL

STYLE

C2 CARBIDE* SHANK DIMENSIONS CARBIDE DIMENSIONS

EDP

NO.PRICE “W” “H” “L” “T” “D” “C”

SA6T 219901 $13.65 ¼ ¼ 6 3⁄32 1⁄8 1 ¼SA7T 219902 14.65 9⁄32 9⁄32 6 3⁄32 1⁄8 1 ¼SA8T 219903 15.95 5⁄16 5⁄16 6 3⁄32 3⁄16 1 ¼SA9T 219904 16.95 3⁄8 3⁄8 6 3⁄32 3⁄16 1 ¼

SA10T 219905 18.35 13⁄32 13⁄32 6 3⁄32 3⁄16 1 ¼SA11T 219906 19.05 7⁄16 7⁄16 6 1⁄8 ¼ 1SA11.5T 219907 19.10 15⁄32 15⁄32 6 1⁄8 ¼ 1SA12T 219908 20.30 ½ ½ 6 1⁄8 ¼ 1



H = Tool HeightW = Tool WidthL = Overall Tool LengthT = Carbide ThicknessD = Cut-o\ WidthC = Carbide Length

SA-T SA-C

TOOL

STYLE

CUT-

OFF

WIDTH

883/PREMIUM C2* 370/PREMIUM C5-C6* SHANK DIMENSIONS

EDP

NO.PRICE

EDP

NO.PRICE W H L

CTL-111 1⁄8 210411 $15.10 210511 $15.70 ½ 1 5CTL-122 3⁄16 210422 15.55 210522 16.00 ½ 1 5CTL-121 ¼ 210433 16.05 210533 16.60 ½ 1 5CTL-120 5⁄16 210444 16.00 210544 16.60 ½ 1 5

CTL-130 3⁄8 210455 19.40 210555 20.65 5⁄8 1 ¼ 5CTL-140 3⁄8 210466 21.50 210566 22.25 ¾ 1 ½ 6



*Prices subject to change. *Prices subject to change.

MADE IN USA

ROCK RIVER TOOL WILL GIVE YOU –

CONSISTENT HIGH QUALITY TOOLS • Critical tool dimensions 100% inspected.

• Modern quality assurance system maintains consistent high quality tool production.

• Optimum performance tool geometries & carbide grades.

• Close tolerance tools will greatly reduce wear rates and maintain machined part quality.

SERVICE – PROMPT DELIVERY • Most orders shipped same day received.

• Very large stock tool inventory reduces need for costly user & distributor inventories.

• No minimum orders.

LOWER TOOLING COST • Improved cutting tool performance with much higher cutting speeds & feeds – far

shorter machining cycle costs.

• Dramatic tool wear reduction results in much longer production runs with fewer tool

changes & set-up scrap.

• Optional modi^cations of stocked standard tools eliminates need for costly special tools.

• Optional modi^cations reduce lead time for special tooling needs.

LIMITED WARRANTYRock River Tool, Inc. does not give any warranty on its products, except as follows: Rock River Tool, Inc. warrants to original equip-

ment manufacturers, distributors and industrial and commercial users of its products that each new product manufactured or

supplied by Rock River Tool, Inc. shall be free from defects in material and workmanship. Rock River Tool, Inc.’s sole obligation under

this warranty is limited to furnishing, without additional charge, a replacement for, or at its option, repairing or issuing credit for any

such product which shall within one year from the date of sale by Rock River Tool, Inc. be returned freight prepaid to Rock River Tool,

Inc. and which upon inspection is determined by Rock River Tool, Inc. to be defective in materials or workmanship. The provisions of

this warranty shall not apply to any product which has been subjected to misuse, improper operating conditions, machine set-up

or application of cutting "uid or which has been repaired or altered if such repair or alteration in the judgement of Rock River Tool,

Inc. would adversely a\ect performance of the product. Complete written information with respect to all such matters, including

operating condition, machine set-up, cutting "uid, cutting speed and feed rate, must be furnished to Rock River Tool, Inc. as a pre-

requisite to its consideration of any claim or complaint under this warranty.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OR MER-

CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Rock River Tool, Inc. shall have no liability or responsibility on any claim of

any kind, whether in contract, tort or otherwise, for any loss or damage arising out of, connected with, or resulting from the manu-

facture, sale, delivery or use of any product sold hereunder, in excess of the cost of replacement or repair provided herein.

IN NO EVENT SHALL ROCK RIVER TOOL, INC. BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. Rock River

Tool, Inc. makes no other warranty, expressed or implied, except the warranty against defects in material and workmanship set forth

above; and Rock River Tool, Inc. neither assumes nor authorizes any other person or entity to assume for it any other obligation or

liability in connection with any of its products.

WARNING — Because cutting tools may shatter or break, government regulations require the use of safety glasses and other safety

equipment at all times in the vicinity of cutting tool use. Grinding of solid carbide or carbide tipped tools will produce carbide and

braze dust that may be hazardous to your health. Use adequate ventilation and read this applicable “Material Safety Data Sheets.”

For free “Material Safety Data Sheets”, email Rock River Tool, Inc. at [email protected].

Copyright 2016

Documents

ROCKRIVERTOOL - Rock River Tool Inc