• All Weather Durable PVC• Won’t Dent, Rust, Rot or Mildew• Tall Walk In Shed• Never Needs Painting• 61 Inch Wide Double Doors• Easy Assembly• High Wind Tested• Snow Load Tested 20lbs/sq. foot• Pad Lock Ready (Lock not included)• Wooden or Cement Foundation Needed

Call us for any missing or damaged parts.Do not return to the store.

CustomerService Hotline(800) 483-4674

Your Total Solution To Maintenance Free Storage Sheds.

Available Kits• Foundation Kit Available• Modular 2.5 Ft Extension Kits Available• 10 Ft x 8 Ft Window Kits Available

Ver: 4.0

OWNER’S MANUAL / Instructions for Assembly ‘10 Ft WoodBridge Extension’

Patent #416.091

Vinyl Garden ShedVinyl Garden ShedA Product of

TM

A L L P U R P O S E V I N Y L G A R D E N S H E D S

Size 10 Ft x 2 1/2 Ft /3.2 m x 0.8 m (Approx.)

Building Dimensions (One extension) :Approximate

SizeStorage Exterior Dimension Interior Dimension

10 Ft x 2 1/2 Ft 26 1/2 Sq. Ft 161 1/4 Cu.Ft

Roof Edge to EdgeBase Dimension

3.2 m x 0.8 m 2.5 Sq.m 4.6 Cu.m

Width Depth Height

inch cm125 3/8 318.4

inch cm127 7/8 324.8

7985 1/2 217.1

inch cm123 3/8 313.3

7973 185.5

Wall to WallArea Volume

31 79 31 31

PART 1ASSEMBLING SHED WITH EXTENSION KIT

PART 2ADDING EXTENSION KIT TO EXISTING SHED

Note: For shed with extension use this manual only.

www.duramaxbp.com

Note - Basic shed dimensions are available in basic shed manual.

Duramax Garden ShedLimited Fifteen Year Warranty

U.S. Polymer Inc. will send a replacement part free of charge, in the event of material defects and or workmanship for a period of fifteen years from the date of purchase.

This warranty is extended only to the original purchaser. A purchase receipt or other proof of date of original purchase will be required before warranty service is rendered. In no event shall we pay the cost of flooring, labor, installation or any other costs related thereto.

This warranty only covers failures due to defects in material or workmanship which occurs during normal use and does not extend to color change arising due to normal weathering or to damage resulting from misuse or neglect, commercial use, failure to follow assembly instructions and the owner’s manual (including proper anchoring of the shed), painting, forces of nature and other causes which is beyond our control.

Claims under this warranty must be made within the warranty period by calling 1-800-483-4674 or mail in a dated sales slip and clear photograph of the part to:

U.S. Polymers, Inc.1057 S. Vail Ave, Montebello, CA 90640.

We reserve the right to discontinue or change components. If a component has been discontinued or is not available,U.S. Polymers, Inc. reserves the right to substitute a component of equal quality as may be compatible.

Limits and Exclusions

There are no express warranties except as listed above. The warrantor shall not be liable for incidental or consequential damages resulting from the use of this product, or arising out of any breach of this warranty. All express warranties are limited to the warranty period set forth above . Some states do not allow the exclusion or limitation on how long an implied warranty lasts, so the above limitations may not apply to you.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state or country to country.

Behind left Door Panel for Basic Shed.Location of Product Labels

On Side Panel for Extensions.

1

2

SAFETY & PRECAUTIONS

Before You Begin...

1. Check your local building codes regarding footings, location, etc.

2. Select a site that allows enough working space around the shed.

3. Determine building foundation and anchor system.

4. Read and understand the Owner’s manual enclosed in the package.

5. Follow all directions and dimensions thoroughly.

6. Follow the steps given in the manual carefully for correct assembly.

7. Make sure all parts are present before you start assembling.

8. BE SAFE : Follow safety instructions and avoid injury. (See inside page).

9. GROUND MUST BE EVEN : Make sure the foundation frame lies flat on the ground. If the earth bed is uneven, remove sod and other debris andlevel it with a flat shoval.

10. Separate contents of the carton by the part number and review the list. Be sure you have all the necessary parts for your shed.Refer Owner’s manual for part list.

CAUTIONSharp Edges

3

SAFETY & PRECAUTIONSFor your own safety, please read and follow these instructions during the shed assembly.

1. Always wear work gloves, long sleeves and eye protection during assembly of the shed. Some pieces of the shed contain sharp edges and can cause injury.

2. Be cautious with the tools used for the assembly of the shed. Familiarize yourself with the operation of all the power tools.

3. Children and pets should be kept away from the assembly site to avoid any distractions and accidents.

4. When using a step ladder, make sure it is on even ground and fully open with the safety latch in place. Never concentrate your full weight on the roof or any part of the shed.

5. Do not attempt to assemble the shed on a windy day. Shed panels can be whipped across by the wind making the worksite difcult and dangerous.

4

IMPORTANTWear eye protection when using any form of power tools. Do not use voltage power tools in a wet or dampenviornment to avoid electric shock.

Do not use any part of the shed as a means of personal support while attaching components during assembly.

The shed must be constructed on a solid base foundation. A concrete pad or a large size concrete patiostone squares is recommended for suitable floor base. Make sure it is firm and level and will allow drainageaway from the site. The base foundation should be at least 4 inches (100mm) larger than the shed dimensions.Please refer to the front page of your owner’s manual for the exterior dimensions of the shed. Manufacturer is not responsible for the choice and construction of the foundation.

For a concrete pad base, prepare a level bed for a firm footing layer of crushed stone. The concrete padshould then be poured to a thickness of 4 inches (100mm) to 5 inches (125mm). Allow to dry thoroughly for at least 48 hours

Your shed must be firmly anchored to the concrete pad or large concrete patio stone squares, to help protectagainst damage in high winds.

Care & MaintenanceAlthough this unit does not require any maintenance, care should be taken to prolong the life of your shed.

ROOF : Keep roof clean of leaves and snow with long handled, soft bristled broom. Heavy amountsof snow on the roof can damage the shed making it unsafe. Do not step on the roof.

WALLS : Do not rest any object against the wall panels of the shed.

DOORS : Keep doors closed to prevent wind damage.

FASTENERS : Regularly check your shed for loose screws, bolts, nuts, etc. And retighten them as necessary.

MOISTURE : With changing temperatures, condensation will accumulate inside the shed. Good ventilation will help in regulating and avoid moisture.

TIP : A noncorrosive caulking is helpful to seal the shed.

DO NOT store swimming pool chemicals in your building. Combustibles and corrosive must be stored in air tight containers

Parts List

Cordless Drill - Philips HeadHammer or Rubber malletCarpenters Square8’ Step LadderAdjustable pliersLevel - 3ft.Tape MeasureCaulk GunWaterproof Clear SiliconSealantHand Gloves

Tools You Will Need

2. Maximum no. of Extension can be build upto 10’x13’ (ie. One Extension).

Note

3. Shed with more than two extensions require Roof Super Support.Recomended Qty of Roof Super Support

For 10’x10’ Vinyl Shed - 3Nos.For additional each Extension - 1No.

1. Before starting installation, please refer Safety & Precautions.

5

B1LA, B1RA, B21,B22, B3LA, B3RA

CB1A, CB2A, CB3XA, CB4A, MJ

RS1A, RS3XA,RS3LA, RS8A, RS9A

RS5A, RS6XA,RS7XA

RS2A, RS10A RS4XA, RS11A,RS12A

DSH RS14A

CDLA CDRA

CCA CMA

FDCL FDCR

FCB

FMC

FCC

RJ

EPSCBC

PIN PPG & PWS S1, S2, S7

CODE QTY

B1LA 1B1RA 1B21 2B22 2 B3LA 1B3RA 1 CB1A 2 CB2A 2 CB3XA 4CB4A 2RS1A 4RS2A 4RS3LA 2RS3XA 2RS4XA 4RS5A 4RS6XA 2RS7XA 2

CODE QTY

FDCL 1FDCR 1FCC 4FMC 7 FCB 4RJ 4 EPS 4CBC 3PPG 80PIN 80S1 253S2 8S7 16

CODE QTY

RS8A 4RS9A 4MJ 7RS10A 2RS11A 2RS12A 2RS14A 12DSH 1CMA 7CCA 4CDLA 1CDRA 1SP 12FPL 2 FPR 2RP 6RRS 3DL 1DR 1

PARTS ACCESSORIES

10’ x 8’ Exploded View

SPCB4A

CB1A

B1LA

B1RA

B21

B22

B22

B21

B3LA

B3RA

6

RP

RP

RP

RP

RP

FPL

FPR

FPR

FPL

RS3LA

RS3XAMJ

RS3LA

RS3XA

MJ

RS1ADSH

RS1A

RRS

RRS

RRS

RP

RS8A

RS9A

RS2A

RS4XA

RS9A

RS2A

RS4XA

RS6XA

RS7XA

RS12A

RS10ARS11A

RS2A

RS1A

RS2A

RS5A

RS5A

SPSP

SP

SP

SP

SP

SP

SP

SP

DL

DR

CMA

CMA

CMA

SP

SP

CMA

CMA

CMA

CMA

CCA

CCA

CCA

CCA

CDLA

CDRA

CB3XA

CB2A

MJ

CB3XA

MJCB2A

CB3XA

MJ

CB3XA

CB1ACB4A

EXTL, EXTR RS4A, RS11A,RS12A

RS6A,RS7A,RS13A CB3A

RS14A FMC

CMA PPG & PWS

PIN

CODE QTY

EXTL 1 EXTR 1 CB3A 2RS3SA 2RS4A 2RS6A 2RS7A 2RS11A 1RS12A 1RS13A 8RS14A 4CMA 2SP 2RP 2RRS 1

PARTS

One extension Parts List

CODE QTY

FMC 2 PPG 16PIN 16S1 40 S3 56

ACCESSORIES

7

S1

8

EXTL

EXTR

SP

CB3A

CMA

CB3A

CMA

RS5ARS4XA

RS7XA

RS12A

RS11A

RS3SA

RS3SA

RS4A

RS4A

RS6A

RS7A

RP

RP

RRSExploded View with one extension

RS5A

RS13A

SPSP

SP

A. Foundation

9

DuraMax must be installed on a level wooden platform or a level concrete foundation.

2. Using exterior grade CDX 3/4” (19mm) plywood, cut and fit together the sheets to form solid foundation as shown. Foundation must be square and level.

1. Use pressure treated wood studs 2 x 4 (Actual size 2” x 3 1/2”, 50mm x 88.9mm) to create a platform frame that has an outside dimension of 126” x 126” (3200mm x 3200mm).

The following are the list of lumber and sizesyou will need.

Wooden Platform (Not Included)

Pressure Treated - Wood Studs:4ea 2” x 3 1/2” x 126” (50mm x 88.9mm x 3200 mm)6ea 2” x 3 1/2” x 87 7/8” (50mm x 88.9mm x 2232 mm)3ea 2” x 3 1/2” x 24 1/8” (50mm x 88.9mm x 613 mm) Exterior Grade (CDX) - 3/4” (19mm) plywood2ea 3/4” x 48” x 94 7/8” (19mm x 1219.2mm x 2410 mm)1ea 3/4” x 30” x 94 1/8” (19mm x 762mm x 2410 mm)2ea 3/4” x 63” x 31 1/8” (19mm x 1600 mm x 790mm)

L-Brackets: 8ea

The shed must be constructed on a solid base foundation. A concrete pad or a large size concrete patio stone squares is recommended for suitable floor base. Make sure it is firm and level and will allow drainage away from the site. The base foundation should be at least 4 inches(100mm)larger than the shed dimensions. Please refer to the front page of your owner’s manual for the exterior dimensions of the shed. Manufacturer is not responsible for the choice and construction of the foundation

Concrete Platform

Note For a concrete pad base, prepare a level bed for a firm footing layer of crushed stone. The concrete pad should then be poured to a thickness of 4 inches (100mm) to 5 inches (125mm). Allow to dry thoroughly for at least 48 hours

If the shed is assembled with wooden foundation on soil, use the soil anchor kit.

Note

Note : If you have DURAMAX Foundation, please follow instruction manual in that package. If not, follow below wooden platform instruction.

Lay 2 x 4(Actual size 2”x 3 1/2”, 50mm x 88.9mm)

Note

50mm (2”)

88.9mm (3 1/2”)

Part 1:Assembling shed with Extension kit

30”762 mm.24”609.6mm.

94 7/8”

2410mm.

126”3200mm.

L- BRACKET

31 1/8”

790 mm

.

24”609.6mm. 24”609.6mm. 24”609.6mm.

126”

3200mm.

48”1219.2mm.

94 7/8”

2410 mm.

31 1/8”

790 mm

.

30”762mm.

48”1219.2mm.

63”1600.2mm.

63”1600.2mm.

Parts Needed:B. Base FrameCode Qty

B1LA 1B1RA 1B3LA 1B3RA 1B21 2B22 2S1 32

Note

Using a carpenter square, line up corners. Align base bars, mark the concrete at the holes in the base and drill concrete with suitable concrete bit to accept 1/4” x 1 1/2” (M6 x 40mm) anchor bolts. (Qty - 38Nos. not provided).

Assembly on concrete foundation

1

M6 Anchor Bolt

Base ‘U’ Channel

Concrete

1. It is important that these instructions are followed step by step. 2. All parts are clearly marked and care should be taken to use the correct one.3. Don’t install under windy conditions.4. If you are building the shed against a wall, build it 2.5 ft. away then slide it in.

Note

10

Parts Needed for Extension:

Code Qty

EXTL 1EXTR 1 S1 6

S1

B22B1RA

Measure in all direction as shown in figure to make the base channel assembly in a perfect square.

Door Opening

61 1/4” (1556mm)

123 3/8” (3133mm)

123 3/8” (3133mm)123 3/8” (3133mm)

123 3/8” (3133mm)

B3RA

B3LAEXTL

EXTL

B21

B22B1RA

B1LA

B21

B22

C. Wall & Columns

1

FrontFig.2

Right

Left

1

2&3

Fig.3

Parts Needed:

Code Qty

CMA 7CCA 4CDLA 1CDRA 1CB1A 2CB3XA 4MJ 1CB4A 2FCB 4CBC 1SP 12S1 57S2 4

11

CDRA

CDRA

CDRA

B1RA

1.All parts are clearly marked and care should be taken to use the correct one.

2.Set the Torque limit of your Screw drill to #3 or #4 to ensure the screws do not strip the metal reinforcements.

Note

Fig.1

CDRA

B1RA

CDRA

CDRA

Parts Needed for Extension

Code Qty

CMA 2CB3A 2SP 2S1 6 S3 2

S1

12

Check the stamped label on top of all panels inside.

NoteSP

2

B1RA

CDRA

Fig.1

SP

Fig.2

CCA

B1RA

B22

Fig.1

CCA

SP

Fig.3

CCA

SP

4

1

S2

CCA

FCB

Fig.1

Do not tighten the screw. Leave it loose

Note

Front

SP

CDRA

1

CCASP

1

2&3

B1RAB22

3

CCA

S1

FCB

Fig.3

CB4A

CB1A

EPS

13

S1

CB1A

CDRA

Fig.2

5

6

2CB1A

CDRA

1

Fig.1

CB1A

S1

FCB

CB4A

B1RA

CDRA

1

2&3

CB4A

B1RA

Fig.1

S1

CB4ACDRA

Fig.2

S1

7

CB3XA S1

CB3XA

CB3XA

MJ

CB3XA

CB3A CB3A S3

CB3XA

Fig.1

CB3A

CB3XA

CB3A CB3A S3

CB3XA

MJ

CB3XA

Fig.2

21

1

CB3XA

14

S1

SPCMASP

CMA

B22

B21

8

2Fig.1 Fig.2

CB3XACB1A

S1

CB3XA

S1

CMA

SPCCA

CB3XA

FCBS1

Fig.1

Fig.3

Fig.2

11

INSIDE

CB3XA

CB3ACB3A

10

S1

SPCMA

CMA

SP

Right Wall

Right Wall

Right Wall

Inside

1

3

3

1&2

15

Fig.1

Right Wall

1

13

SP

Fig.1

EXTR

CCA

Fig.2

Fig.3

B3RA

CCA

CCA

CCA B3RARight Wall

12

Right Wall

SP

SP

14 Do not tighten the S2 screw. Leave it loose.

Not

CB3A

S1

FCB

Fig.2

CB3AFCB

Fig.1

S2FCB

Note

CCA

Right Wall

S1

CMA SP

Fig.2

CMA

CB3A

S1

S1

2

1

2&3

1&2

16

SPCMA

S1

Fig.2

17

Fig.1

Fig.4

S1

Fig.3

CMACB3XA

S1

CB3XA

CMA

CMA 1&2

Fig.1 Fig.2

CB3XA

FCBS1

CB3XACB3A

S1

CB3XA

S1

CMA

Fig.3

16

CB3XA

CB3XA

15

SPCMA

B3RA

S1

Fig.1

Fig.2

SP

CCACMA

Back Wall

Back Wall

B3RA

SP

CBC

CB3XACMA

Back Wall

SP

CMA

B3LA

1

SP

CBC

1

2

3

2

3&4

17

B22

B3LA

CCA

Fig.2

Fig.3S1

B22

CCA

SP

CCA

Fig.1

CCA

SP

B3LA

18

CCA

Do not tighten the S2 screw. Leave it loose.

Note

19

1&2CB3XA

S1

FCB

CB3XA

FCB S2

CB3XA

S1

CMA

Fig.4

SPCMA

S1

Fig.2

SP

1SP

Fig.1

CCA

20

CMASP

EXTL

Left Wall

Back Wall

Fig.1 Fig.2

1

4

2&3

1

2

18

Left Wall

S1

SPCMA

Fig.2

S1

CMA SP

EXTL

21

Fig.1

CMA

CB3XA

CMA

Fig.2

CMA

S1

SP

S1

CB3A CB3XA

S1 Fig.2

22

22

CB3A

FCBS1

Fig.1

CB3XA

S1

CMA

Fig.3

FCB

CB3ACB3XA

Left Wall

23

SPCMA

Fig.1

1

2

2

3

3CB3A

1&2

2

1

S1

19

CDLA

SP

Fig.1 Fig.2

CDLA

CDLA

B1LA

S1

SP

B1LA

126

Front

Do not tighten the S2 screw. Leave it loose

Note

FCB

CCA

S2

Fig.1

25

CB3XA

S1

FCB

Fig.2

1&2

Front

FCB

2

24

Fig.3S1

B1LA

CCA

B1LA

B21

CCA

Fig.2

SP

CCA

Fig.1

B21

B1LA

CCA

Left Wall

1

2&3

SP

D. Roof Structures

CMA

FMC

21

1

S1

CMA

FMC

Parts Needed:

Code Qty

RS1A 4RS2A 4RS3LA 2 RS3XA 2RS4XA 4RS5A 4RS6XA 2 RS7XA 2 RS8A 4RS9A 4MJ 4RS10A 2

Code Qty RS11A 3RS12A 2 DSH 1FDCL 1FDCR 1FCC 4FMC 7RJ 4S1 155S2 4S3 40S7 16

Parts Needed for Extension

Code Qty

RS6A 2RS7A 2RS3SA 2RS4A 2RS6A 2RS7A 2RS11A 1RS12A 1RS13A 8FMC 2S1 26 S3 16

CMACMA

CMACMA

CMA

CMACMA

CMA

FCC

CCA

FCC

CCA

S1

Fig.11

Fig.2

CDLA

FDCL

S1

CDRA

FDCR

S1

CDRA

CDLA

2

22

2

3

CCA

23

Front roof structure assembly

RS1A

RS1A

RS2A

S1

RS9A

RS9A

RS2ARS8A

RS8A

RS2A

RS2A

S1RS1A

RS1A

MJ

5

4

6

Make sure these holes up

S1

RS9A

RS8A

RS9A

RS1A

RS8A

RS1A

24

Back roof structure assembly

RS1A

RS1A

S1RS1A

RS1A

MJ

Make sure these holes up

RS2A

RS2A

S1

RS8A

RS8ARS9A

RS9A

RS2A

7

8

9

RS8A

RS8A

RS9A

RS9A

RS1A

S1

RS1A

25

10

12

RJ

RS3LA

11

13

Fig.1

RS3XA

MJ

S1

RS3LA

Fig.1

RS3LA

MJ

S1

RS3XA

Fig.1

Fig.1

S1

RS3LA

RJ

1&2

1&2

1

2

1

2

RS3LA

RS3XA

RS3SA

RS3LA

RS3XA

RS3SA

RS3LA

RS3XA

RS3SA

Fig.2

RS3SA

RS3XA

RS3LA

RS3XA

RS3SA

Fig.2

RS3SA

RS3XA

RS3LA RS3LA

S1

Fig.2

Fig.2

RJRJ

26

15

16

26

14

RS5A

RS5A

RS6A

S1

NoteMake 2 sets.

RS5A

RS6A

S3

S3

NoteMake 2 sets.

NoteMake 2 sets.

RS6XA

RS6XA

RS13A

RS13A

27

18

19

27

17

RS7A

RS7XA

RS5A

RS7XA

RS7A

RS5A

RS5A

RS7XA

NoteMake 2 sets.

NoteMake 2 sets.

NoteMake 2 sets.

RS13A

RS13A

RS7A

S1

S3

S3

28

Front

Fig.1

RS1A

CDRA

Fig.3

CDLA

Fig.4S1

FDCL

RS1A

20

121RS1A

DSH

S1

Fig.1

DSH

S1Fig.3

DSH

RS1A

Fig.2

S1

RS1A DSH

Front

DSH

RS1A

RS1ARS1ACDRA

RS1ARS1ACDLA

RS1ARS1ARS2A RS2A

Fig.2

S1FDCR

RS1A

3

1&2

1&2

3&4

29

RJ

Fig.1

S1 RJ

RS1A

Fig.2

RJFCC

S2

Fig.3

2

RS1A

FMC

S1

22

BackRS1A

CMA

CMA

CMA

S1

Fig.4

RS2A

23

CMA

1,2,3&4

RS3LA

RS3XA

RS3SA

RS3LA

RS3XA

RS3SA

30

25

RS3LA

FMC

24

Fig.2

RS6A

RS7A

RS5A

RS6A

RS13A

RS5A

RS6XA

RS6XA

S1

Fig.1

RS5A

1

2

RS13A

RS13A

RS5A

RS8A

RS8AS1

S1

Fig.2

Fig.1

RS5A

RS6A

31

S1

RS4XA

RS3LA

Fig.1

Fig.2

RS4XA

RS5A

S7

Fig.3

RS4XA

RS5A

RS5A

RS4XA

S7

26

27

RS5A

RS5A

RS6A

RS7A

RS6XA

RS7XA

RS4XA

RS4XA

RS4XA

RS4XA

1

2

1

1

2

23

3

RS9A

S1

S1

32

Fig.1

RS10A

S1

RS5A

Fig.2

RS10A

RS6A

RS7A

S1

Fig.3

RS5A

28

29

RS11A

RS5A

S1

1

2

3

RS4XA

RS4XA

RS11A

RS11A

RS11A

RS10A

RS10A

1

2

3

3

3

fig.2

RS4A

fig.1

RS4A

RS4A

fig.3

S1

S1

S1

33

30

RS12A

S1

RS5A

RS12A

RS12A

RS12A

D. Roof Panels

FPR

PPGPIN

Front

FPRFPL

Front

FPR

Back Back

FPL

34

1 2

3 4

PPG PPG

PPG

PPG

Parts Needed:

Code Qty

RP 6FPL 2FPR 2RRS 3PPG 78PIN 78RS14A 12

PIN

PIN

Note Insert roof plugs into Facia Panelonly as indicated.

PIN

PIN

Apply silicone into the holes

before inserting the pinsParts Needed for extension

Code Qty

RP 2 RRS 1PPG 16PIN 16RS14A 4

RRS

Use a screw driver to align the holes. NoteInsert roof plugs into roof panelsonly as indicated.

PPG

RP

Note

Silicone

Roof Panel installation by using ladder from inside at missing Panels.

Note

R

Back Back

35

5 6

7 8

9 10

PIN

RRS

Apply silicone around the roof plugs and the pin holes before fixing the pins.

R

PPG

left

leftleft

Back

RP

RP

RP

RP

PINPPG

PINPPG

PINPPG

PINPPG

36

R

16

RRS

PPG

Front

PIN

RP

11 12

PINPPG

15

RP

PPG

Front

PIN

Front

R

PPG

R

PIN

R

PPGPIN13

RRS

14

Front

RRS

PPGPIN

RRS

PPGPIN

RRS

RP

Back

37

Outside View Inside View

Fig. 1 Fig. 2

RS14A

RS5

RS3RS14A

17

E. Door

DL

DR

DL

DR

38

Apply silicone around the perimeter of the base ‘U’ channel. Seal the corners, joints and base of door column. This is optional and should be done for heavy rain areas if needed.

Note

Base ‘U’channel

Silicone

Column

Fig.2

Silicone

Base ‘U’channel

1

2

Fig.1

After completing the panel assembly,apply silicone around the roof plugs.This is optional and sould be done for heavy rain areas if needed.

Note

F. Ventilation KitParts Needed:

Code Qty

VC 2VCP 4

Optional ventilation kits can be installed on any of the wall panels. However, we recomend mounting them on the top of the shed’s back wall.

TOOLS YOU WILL NEED

Power DrillDia 3/16” (5mm) drill bitDia 1/2” (12.5mm) drill bit

VC VCP

5mm.(3/16”)

12.5mm.(1/2”)

SP

Outside Outside

Note

VC

SP

VC

SP

SP

SP

39

1 2 3

4 5 6

VCP

Note: To ensure that your shed withstands high winds,you will need the following reinforcement.

High wind area installation instructions

Parts needed (not included) :CODE DESCRIPTION QTY

S4 Dia. 4.2 x 16mm. (5/32” x 5/8”) Sheet Metal Screw 56S5 M6 x 40mm. (1/4” x 1 1/2”) Anchor Bolt 38

M6 Anchor Bolt

Base ‘U’ Channel

Concrete

Attach each side panel ( SP ) on the bottom to the Base U-channel. Using a dia. 3mm (1/8”) drillwith a power drill, make two equal distance holeson the Base U-channel through the Side Panel.Drive a self tapping screw (S4) through the BaseU-channel to the Side Panel. Repeat this for every Side Panel. See blowup.

S4

SP

Base U-channel

SP

40

1

2

3.0mm.(1/8”)

Using a carpenter square, line up corners. Align base bars, mark the concrete at the holes in the base and drill concrete with suitable concrete bit to accept 1/4” x 1 1/2” (M6 x 40mm) anchor bolts. (Qty - 38 Nos. not provided).

Assembly on concrete Foundation

Attach each Side Panel (SP ) on top to the Roof Structure (RS1A, RS3LA & RS3XA,RS3SA). Using a dia. 3mm (1/8”) drill with a power drill, make two equal distance holes on the Side Panel through the Roof Structure. Drive a self tapping screw (S4) through the Side Panel to the Roof Structure. Repeat this for every Side Panel. See blowup.

RS3

RS1A

S4

SP

RS1A

Side Panel

Roof Structures

S4

Base U-channel

S4

The ‘DURAMAX’ shed has been tested and passed wind loads of up to 115 mph in a controlled laboratory environment. Natural high wind areas create wind at unpredictable speeds that are very difficult to capture accurately by location. As such we cannot guarantee the performance of the shed in these extreme situations.

Important Warranty Information

“We recommend to clear snow from the Roof top after each Snowfall.” 41

3

3.0mm.(1/8”)SP

RS1A

2

42

Part 2:Adding extension kit to existing shed

Back

1

PPGPIN

PPGPIN

PPGPIN

RP

RP

PPGPIN

FPL

FPR

Back

Back

RRS

5

43

4

Back

SUPPORT

Support not includedNote

Back

RS10A

6 Back

S1

Fig.2

S1

Fig.1

1

2

RS13A

RS13A

7

8

44

Back

Back

FCC

RJ

S1S2

S1

10 S1

1&2

1&2

3

3

3

45

CB3XACB3XA

CB3XACB3XA

Fig.3

Fig.2

Fig.1

Back

Back

CMA

CB3XA

CB3XACB2A

S1

CB3XA

FCB

CB2A

9

RS2A

RS2A

RS8A

RS8A

RS9A

RS9A

RS1A

RS1A

CMA

CMA

CMA

S1

121&2

46

Front

Left

CB2A

Fig.1

FCB

Fig.2

Fig.3

Back

S1

3

3

11

Right

CB3XACB2A

2

1

2

Fig.1

S1

Fig.2

S1CCA

Come back to 10 x 8 extension kit manual (PART -1) and follow the steps accordingly.

Note

131&2

47

S1

CB2A

Front

Right

Fig.1

FCB

CMA

CB3XACB2A

Fig.2

Fig.3

3

3

CB2A

CB3XA

MJ

14

S1

CB3XA

CB2AMJ

S1

U.S. Polymers, Inc.1057 S. Vail Ave Montebello, CA 90640,United States of America

RD- 4.0 2013-10-11