RMH1000M-HD/RMS1010-HDROUND MODULE HANDLER/SPEAR

Owner's NameDealer's NameSerial NumberDate Purchased

Model No.

10th EDITIONCAT747rev 1

Beginning Serial No: 580000July 15, 2020

TABLE OF CONTENTS

Description Page3579

111315171819202122

Round Module Mover Base Unit - RMH1000......................................................................Module Mover Base Frame & Hitches..................................................................................Round Module Mover Side Shift Hydraulics.........................................................................Decals............................................................................................................................Round Module Mover Mast Unit - RMH1010........................................................................Round Module Mover Spear Unit with Mast.........................................................................Tilt Hydraulics Assembly..................................................................................................Hydraulic Bale Lift Assembly............................................................................................Light & Harness Assembly Electrical Diagram......................................................................Light Wiring Harness Electrical Diagram..............................................................................Light Harness Assembly Electrical Diagram........................................................................141146 Hydraulic Side-Shift Manifold.................................................................................Numerical Parts Index......................................................................................................Warranty

CAT747rev 110th Edition

July 15, 2020

RMH1000M-HD/RMS1010-HDRound Module Handler/Spear

(Beginning Serial # 580000)

The Terms "Left" and "Right" used in the description of parts are determined byfacing the direction of travel of the machine.

"A/R" found in the "No. Req'd" column denotes "As Required"."OPT" found in the "No. Req'd" column denotes "Optional".

NOTES

15

16

15

15

15

16

16

16

12PA

GE

2

1

23

4

5

6

7

8

9

10

1113

14

17

18

19

20

21

22

23

24

25

26

28

29

3031

33

3435

36

37

38

39

40

12

41

5

5

5

6

7

8

9

11 27

13

25

26

28

28

28

29

29

29

29

29

29

29

3031

33

33

33

34

35

36

36

36

37

38

38

38

39

40

1212

12

1212

41

41

414141

32

32

32

32

INCLUDES 2205 GREASE FITTING

ITEM PART NUMBER DESCRIPTION QTY SHOWN QTY REQ'D COMMENTS1 2089 ELBOW, 1/8 X 90 DEGREE STREET; GALV. 12 2205 FITTING, 1/8 STG. GREASE 1610-BL 1 13 2227 NIPPLE, 1/8 x 6" LG 14 8519 DECAL, SLOW MOVING VEHICLE 15 13825 WASHER, 2-3/4 x 1-27/32 166 13853 SLIDE, 5 X 3/4 27 13854 SLIDE, 5 X 1-1/4 28 13855 SLIDE, 3 X 3/4 29 13856 SLIDE, 3 X 1-1/4 2

10 20286 ELBOW, 1/8 x 90 111 21014 PIN, ROLL 3/8 X 2-1/2; HEAVY DUTY 812 21082 PIN, BUSHING 713 62470 ROD, BALE MOVER PLATE GUSSET 214 62476 MOUNT, HYD MANIFOLD; RMM 115 80902 TAPE, 2" X 9" YELLOW REFLECTIVE 416 80903 TAPE, 2" X 9" RED REFLECTIVE 417 95157 FRAME, MOD MOVER BASE 118 95682 FORK, MODULE MOVER; RT 119 95683 FORK, MODULE MOVER; LFT 120 125284 SHIELD, REAR BALE 121 125477 CHANNEL, FRAME BRACE; TOP 122 125478 CHANNEL, UPPER FRAME BRACE 123 129454 PLATE, TOP GUSSETTED 124 129455 PLATE, BOTTOM COVER 125 129459 CHANNEL, LOWER FRAME BRACE 226 141025 CYLINDER, 24x3-1/2x1.5 HYDRAULIC 227 21082A PIN, TOGGLE PIVOT 128 G120371 NUT, 1/2-20 SAE 429 G120394 WASHER, 3/8 SAE FLAT 8 6830 G121358-8 NUT, 5/8-18 SAE; GRADE 8 2 1231 G121574 LOCKWASHER, 5/8 2 1232 G124825 NUT, 3/8-24 LOCK FLANGE (STOVER) 4 3433 G124934 NUT, 1/2-20 SAE JAM 434 G131016 WASHER, 5/8 SAE FLAT 2 1235 G131021 WASHER, 1-1/4 SAE FLAT 836 G180123 SCREW, 3/8-16X1 BUTTON HEAD SOCKET CAP 4 1637 G181700 SCREW, 1/2-20 X 1-1/2 LG HEX HEAD CAP 2 2038 G191172 SCREW, 3/8-24 X 7-1/2; GRADE 8 4 3439 G272505-8 SCREW,5/8-18 X 10.50 USS CAP, GRADE 8 2 1240 G9419533 LOCKNUT, 1-1/4-7, GRADE 8 8

SEE NOTE 1

PAGE 3

NOTE 120973 BUSHING, SPRING 251830 COLLAR, MAIN 1

16

16

41 S51830 ASSEMBLY, MODULE ROLLER 8

ROUND MODULE MOVER BASE UNIT

2

2

PA

GE

4

TRACTOR

BALE

1

3

4

5

6

7

8

11

12

13

14

4

5

7

11

11

3

3

9

1010

ITEM PART NUMBER DESCRIPTION QTY SHOWN QTY REQ'D COMMENTS1 13892 BOX, MANUAL; ASM 12 16348 LIGHT, WORKLIGHT; HALOGEN 23 20421 PIN, SNAPPER; 3/8 DIA. X 3 LONG 34 21080 PIN, CAT III/IV; LOWER 25 62477 BRACKET, RMM LIGHT MNT 26 95155 HITCH, TOP; CAT III/IV 17 95156 HITCH, LOWER; CAT 3/4 28 95157 FRAME, MOD MOVER BASE 19 80167A CAP, DUAL WELD TUBING; 7/8 DIA. 1

10 80167B CLAMP, HALF 7/8 DIA. DUAL WELD 211 G271795-8 SCREW, 3/4-16 X 2-1/2 GR8 312 G271955 SCREW, 1-1/4 X 6 LG.; GRADE 8 113 G9419533 LOCKNUT, 1-1/4-7, GRADE 8 114 S21087 ASM, CAT IV TOPLINK PIN 1

PAGE 5

18

9

MODULE MOVER BASE FRAME & HITCHES

PA

GE

6

TO TRACTOR

TOP CYLINDER

BOTTOM CYLINDER

SSRSSL

SSR

SSL

P2

P2

P1

P1

C2RC1R

C2E C1E

C1RC1E

C2EC2R

1

2

3

4

5

6

7

1

2

2

2

3

4

5

5

5

6

1

1

HOSE, 1/2 #8 ORB M X #8 ORF 90 DEG X 240" LGHOSE, 1/2 X 240 LG HYD; 3000 PSI

ITEM PART NUMBER DESCRIPTION QTY SHOWN QTY REQ'D COMMENTS1 140341 COUPLER,8 ORBF-1/2 QDM 42 140701 HYDF, ELBOW -8 ORB -8 ORFS 43 141025 CYLINDER, 24x3-1/2x1.5 HYDRAULIC 24 141036 HOSE, 1/2 #8 ORB M X #8 ORF 90 DEG X 240" LG 25 141037 HOSE, 1/2 #8 90 X #8 SRT X 41-1/2 LG 46 141148 HOSE, 1/2 X 240 LG HYD; 3000 PSI 27 S141146 ASM, MECH SIDE SHIFT BLOCK 1 SEE NOTE 1 - [S141146-1: NON-SIDE-SHIFT]

140231 SLEEVE, ABRASION RESISTANT A/R NOT SHOWN

PAGE 7

NOTE 1140598 HYDF-10 ORB X -8 ORF ADAPTOR 2141146 BLOCK, HYDRAULIC SIDE SHIFT 1141034C DIVIDER/COMBINER,FLOW;50/50 1 COMES W/BLOCKJ61H1161 HYDF,-8 ORF X 8 ORB M ADAPTOR 6

--SEE NOTE 2--

SIDE SHIFT ONLY; --SEE NOTE 2--

ROUND MODULE MOVER SIDE SHIFT HYDRAULICS

NOTE 2141036 2 W/MAST141148 2 W/MAST141249 HOSE,1/2 X 96" LG; HYD; 3000PSI 2 W/OUT MAST;BASE ONLY141250 HOSE, /2 X 96" LG; HYD; 3000PSI 2 W/OUT MAST;BASE ONLY

RMH DECALS-PICS.docx PAGE 8

1

3

6

2

4

5

7

2 [RMH1010 OPTION ONLY]111

ITEM PART NUMBER DESCRIPTION QTY SHOWN QTY REQ'D COMMENTS1 80934 DECAL, DANGER: MOVING PARTS...PARK 12 80933 DECAL, DANGER; NO CLIMB...SHIELDS 13 80917 DECAL, DANGER: HIGH PRESS. FLUID 14 80932 DECAL, WARNING: CRUSH/PINCH PT5 80936 DECAL, CAUTION: 1-7 ITEMS6 80935 DECAL, CAUTION: READ OP MANUAL7 80942 DECAL, NOTICE: GREASE DAILY

THE FOLLOWING DECALS ARE USED BUT ARE NOT SHOWN80473 DECAL, 26" AMADAS W/FLAG 380817 DECAL, "RMH1000"; 3-1/4 TALL LETTERS, WHITE 38519 DECAL, SLOW MOVING VEHICLE 18343 DECAL, AMADAS "AMERICAN MADE" 1

PAGE 9

80902 TAPE, 2" X 9" YELLOW REFLECTIVE 480903 TAPE, 2" X 9" RED REFLECTIVE 4

DECALS

5

7

28

32

31

7

5

5

PA

GE

10

IN STORAGE POSITION

OPTIONAL 71214 ACCUMULATOR KIT;

SEE PAGE 15.

TRACTOR

BALE

BOTTOM VIEW62465 & 62505 [FEET] ORIENTATION

TRAC

TOR

BALE

SHORT END OF FEET

1

2

4

3

6

9

10

12

11

13

15

16

17

18

19

2023

26

27

29

318

1

2

3

3

3

6

6

6

9

9 9

99

99

10

10

13

15

20

20

20

23

26

27

27

29

2929

29

29

2929

31

8

21

22

21

22

222224

25

30

14

2222

2222

NOT INCLUDED WITH MASTNOT INCLUDED WITH MAST

NOT INCLUDED WITH MASTINCLUDES 2205 GREASE FITTING

2 1 SHOWN IN STORAGE POSITION

NOT INCLUDED WITH MASTNOT INCLUDED WITH MAST

NOT INCLUDED WITH MASTNOT INCLUDED WITH MAST

29 G273210 NUT, 1-1/4 - 12 SAE 830 G431800 LOCKNUT, 1/2-13 USS NYLOCK HEX 131 G9419533 LOCKNUT, 1-1/4-7, GRADE 8 3 NOT INCLUDED WITH MAST32 S21087 ASM, CAT IV TOPLINK PIN 1 NOT INCLUDED WITH MAST

ITEM PART NUMBER DESCRIPTION QTY SHOWN QTY REQ'D COMMENTS1 1673 PIN, HITCH; 1/2 DIA. X 4-3/4 LONG 22 1761 FITTING, 1/4 STRAIGHT GREASE 23 13830 PAD, 1-3/4x10x1/4 POLY 44 13892 BOX, MANUAL; ASM 15 20421 PIN, SNAPPER; 3/8 DIA. X 3 LONG 36 20973 BUSHING, 2X1.75X2"LG 47 21080 PIN, CAT III/IV; LOWER 28 21084 PIN, LOWER LIFT 29 51173 ROLLER, 3-1/2 DIA X 3 WIDE X 2-1/2 LONG STUD 8

10 63588 FOOT, BALE LIFT; STOWABLE 311 71190 ASSEMBLY, TILT HYDRAULICS 112 71275 KIT, HYD BALE LIFT =>SER #510000 113 94986 PIVOT, BOOM 214 95155 HITCH, TOP; CAT III/IV 115 95156 HITCH, LOWER; CAT 3/4 216 95168 FRAME, BALE LIFT MAST 117 95169 FRAME, BALE LIFT HITCH 118 129463 PLATE, BALE LIFT MNTG; RT 119 129464 PLATE, BALE LIFT MNTING; LFT 120 129530 SHIELD, MAST ROLLER 421 80167A CAP, DUAL WELD TUBING; 7/8 DIA. 222 80167B CLAMP, HALF 7/8 DIA. DUAL WELD 823 G131021 WASHER, 1-1/4 SAE FLAT 224 G131088 WASHER, 1/2 USS FLAT 1 825 G180179 SCREW, 1/2-13 X 1-3/4 USS CAP 1 826 G271793-8 SCREW, 3/4-16 X 2 HEX CAP GR8 2 6 ATTACHES MAST TO LIFT27 G271795-8 SCREW, 3/4-16 X 2-1/2 GR8 3 1828 G271955 SCREW, 1-1/4 X 6 LG.; GRADE 8 1

8

PAGE 11

ROUND MODULE MOVER MAST UNIT

PA

GE

12

BALE

TRACTOR

SPEAR ASSEMBLY DETAIL

100139 SPEARS ARE NOT SHIPPED PRE-ASSEMBLED.INSTALL SPEARS AS SHOWN BEFORE USE.

SCALE 0.063

1

3

4

5

6

7

8

5

5

5

6

2

ITEM PART NUMBER DESCRIPTION QTY SHOWN QTY REQ'D COMMENTS1 8519 DECAL, SLOW MOVING VEHICLE 12 63592 STAND,SPEAR PARKING 13 93813 MOUNT, SMV DECAL 14 96909 FRAME, COTTON BALE SPEAR 15 100139 SPEAR, COTTON BALE 46 G120378 NUT,1/2-13 USS 87 G180195 SCREW, 1/2-13 X 4 LG. HEX HEAD CAP 48 RMH1010 UNIT, MAST; ROUND MODULE MOVER 1 REFER TO MAST UNIT PAGES FOR PARTS BREAKDOWN

ROUND MODULE MOVER SPEAR UNIT WITH MAST

PAGE 13

PA

GE

14

OPTIONAL 71214 ACCUMULATOR KIT

1

3

6

8

10

1

1

1

6

8

9

10

3 9

2

4

5

7

11

6

ITEM PART NUMBER DESCRIPTION QTY SHOWN QTY REQ'D COMMENTS1 16401 HYDF, 3/8 NPT X -8 ORF M ADAPTER 42 126672 HYDF, 1/4 NPT -6 ORFS MALE PIPE ELBOW 1 OPT3 140341 COUPLER,8 ORBF-1/2 QDM 24 140414 HYDF, -6 ORS FEM. QD-PD 1 OPT5 140475 ACCUMULATOR, 20 CU. IN. 3000 PSI 1 OPT CHARGE TO 975 PSI6 140568 HYDF, -8 ORF TEE MMF SWIVEL 3 1 OPT7 140570 HYDF, -8 ORF M,1/4NPTF,F SW TEE 1 OPT8 141027 HOSE, 3/8 x 32" 29 141028 HOSE, 3/8 X 48" HYD 2

10 14832 CYLINDER, 10 X 3 X 1.25 HYDRAULIC 211 J38H1068 HYDF, -8 ORB MALE TO -8 ORFS FEMALE 1 OPT

PAGE 15

TILT HYDRAULICS ASSEMBLY

PA

GE

16

TO TRACTOR

TO TRACTOR

1

2

3

4

5

6

15

7

8

9

10

11

12

13

1416

17

18

2

3

5

5

5

6

6

6

15

1515

1515

1515

9

14

16

16

16

17

18

ITEM PART NUMBER DESCRIPTION QTY SHOWN QTY REQ'D COMMENTS1 16320 HYDF, -4 ORF TO -4 F 90 DEGREE SWIVEL 12 140341 COUPLER,8 ORBF-1/2 QDM 23 140568 HYDF, -8 ORF TEE MMF SWIVEL 24 140611 VALVE,CHECK #6 65PSI 15 140794 CLAMP, HALVES; SINGLE #8 (PAIR) 46 140795 PLATE, COVER; SINGLE #8 CLAMP 47 141066 HOSE, HYD; 1/2 X 84" LG 18 141066 HOSE, HYD; 1/2H X 84" LG 19 141067 HOSE, 1/2 X 48" 2

10 141135 HOSE, HYD. 1/2 X 15 111 141136 HOSE, HYD. 1/2 X 8 112 141137 HOSE, HYD; 1/2 X 60" LG 113 141137 HOSE, HYD; 1/2H X 60" LG 114 140182 CYLINDER, 3-1/2" ID; 48-3/8" STROKE 215 G180132 SCREW, 3/8-16 X 2-1/4 USS CAP 816 J38H1004 HYDF, ELBOW -6 ORB -6 ORFS 417 J38H1173 ADAPTER, HDR,HYD VALVE 5921 218 J61H1206 HYDF, 8 ORF UNION TEE; O-RING FSF 2

PAGE 17

HYDRAULIC BALE LIFT ASSEMBLY

PAGE 18

PAGE 19

PAGE 20

PAGE 21

NUMERICAL PARTS INDEX

PART NO. PAGE PART NO. PAGE PART NO. PAGE1673 11 100139 13 G431800 111761 11 125284 3 G9419533 3,5,112089 3 125477 3 J38H1004 172205 3 125478 3 J38H1068 152227 3 126672 15 J38H1173 178343 9 129454 3 J61H1161 78519 3,9,13 129455 3 J61H1206 1713825 3 129459 3 RMH1010 1313830 11 129463 11 S141146 713853 3 129464 11 S16438 1813854 3 129530 11 S21087 5,1113855 3 140182 17 S51830 313856 3 140231 713892 5,11 140341 7,15,1714832 15 140414 1515922 19 140475 1515923 20 140568 15,1716183 19 140570 1516320 17 140598 716326 19 140611 1716348 5,20 140701 716401 15 140794 1716437 19 140795 1716438 18,19 141025 3,716440 18,20 141027 1520286 3 141028 1520421 5,11 141036 720973 3,11 141037 721014 3 141066 1721080 5,11 141067 1721082 3 141135 1721084 11 141136 1751173 11 141137 1751830 3 141146 7,2162470 3 141148 762476 3 141249 762477 5 141250 763588 11 141034C 7,2163592 13 21082A 371190 11 80167A 5,1171275 11 80167B 5,1180473 9 G120371 380817 9 G120378 1380902 3,9 G120394 380903 3,9 G121358-8 380917 9 G121574 380932 9 G124825 380933 9 G124934 380934 9 G131016 380935 9 G131021 3,1180936 9 G131088 1180942 9 G180123 393813 13 G180132 1794986 11 G180179 1195155 5,11 G180195 1395156 5,11 G181700 395157 3,5 G191172 395168 11 G271793-8 1195169 11 G271795-8 5,1195682 3 G271955 5,1195683 3 G272505-8 396909 13 G273210 11

22

ONE-YEAR LIMITED WARRANTYFor AMADAS INDUSTRIES ROUND MODULE HANDLER

A. General ProvisionsThe Warranties described below are provided by AMADAS INDUSTRIES (“AMADAS”) through its authorized

dealers to the original purchaser of each new AMADAS Round Module Hander. AMADAS will repair or replace, at its option,any part covered under warranty which is found to be defective in material or workmanship during the applicable period ofwarranty. This warranty is applicable only to the cost of the part replaced or repaired and does not cover labor costs involvedin installing the replaced or repaired defective part.

B. What is Warranted?All parts of any new AMADAS Round Module Handler are warranted for 12 months. The warranty period will begin

when the Round Module Hander is delivered to the purchaser. AMADAS will repair or replace, at its option, any new partor component under the above warranty, if a defect in material or workmanship appears in such part or component and is reportedto AMADAS before the expiration of the applicable equipment warranty.

Used equipment is not warranted by AMADAS unless it is specifically covered by a separate warranty document.The above warranties cover only defective material and workmanship. The warranties do not cover any depreciation or failurecaused by normal wear, lack of proper maintenance or use, misuse, lack of proper protection during storage, or accident. Thepurchaser shall pay all costs of routine maintenance and/or replacement of maintenance and wear items.

C. Unapproved Service or ModificationAll Obligations of AMADAS under this warranty are terminated if the Round Module Handler is modified or altered

in ways not approved by AMADAS.

D. Securing Warranty ServiceTo secure warranty service, the purchaser must (1) report the product defect and request repair within the applicable

warranty period, (2) present evidence of the date of delivery of the Round Module Handler, and (3) make the Round ModuleHandler available to an AMADAS authorized dealer within a reasonable period of time.

E. No Dealer WarrantyThe selling dealer makes no warranty of his own on any item warranted by AMADAS, and makes no warranty on

other items. The dealer has no authority to make any representation or promise on behalf of AMADAS, or to modify the termsor limitations of this warranty in any way.

F. What are your Responsibilities?a. Read the operator’s manual before operating the equipment.b. Perform all necessary maintenance as described in the operator’s manual.c. Deliver the machine to an AMADAS authorized dealer at your expense during normal working hours for any

needed warranty services.d. Contact an AMADAS authorized dealer promptly on any claim for warranty service.e. Sign the AMADAS machinery delivery form, which will be given to you by the dealer.

G. DisclaimerThere are no warranties that extend beyond the description here. ANY WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR ANY PARTICULAR PURPOSE ARE SPECIFICALLY DISCLAIMED AS ARE ALL OTHER REPRE-SENTATIONS TO THE PURCHASER. AMADAS specifically excludes any liability on behalf of the company for anyincidental or consequential damages including, but not limited to, crop loss, loss of profits, rental of substitute equipment, orother commercial losses. AMADAS shall not be responsible for expenses or inconveniences that you might incur or experiencewith respect to the AMADAS Round Module Handler, nor shall AMADAS be liable for defects, damage, or failures causedby improper storage, unreasonable use, or abuse, or accident, including the failure to provide reasonable and specifiedmaintenance. This warranty applies only to the original purchaser of the equipment. Because some states do not allow theexclusion of limitations of incidental or consequential damages, the above limitation may not apply to you. This warranty givesyou specific legal rights. You may also have other rights, which vary from state to state. Where there is a conflict betweena provision of this warranty and the provision of any state, the state legislation prevails.