RJ-45 Application Note_20111024

7/31/2019 RJ-45 Application Note_20111024

1/16

Application Notes

BDL3245E/BDL4245E/BDL4645E

Remote Control Protocol for RJ-45 Interface

Version 1.0


2/16

Table of Contents

1. INTRODUCTION .................................................................................................................................... 1

1.1 PURPOSE................................................................................................................................................... 11.2 DEFINITIONS,ABBREVIATIONS AND ACRONYMS......................................................................................... 1

2. DEFINITIONS ........................................................................................................................................... 2

2.1 PINOUTS FOR RJ-45CONNECTOR............................................................................................................. 2

3. OPERATING ENVIRONMENTS .......................................................................................................... 4

3.1 INTERNET BROWSER VERSIONS.................................................................................................................. 43.2 HOST CONTROLLER ................................................................................................................................. 43.3 CONNECTION .......................................................................................................................................... 4

4. BEGIN TO CONFIGURE AND OPERATE........................................................................................ 5

4.1 LAN CONTROL PORT ENABLED ................................................................................................................. 54.2 LANNETWORK SETTINGS........................................................................................................................ 54.3 CONFIGURE,CONTROL AND OPERATE ..................................................................................................... 7

5. SUMMARY TABLE FOR LAN CONTROL FEATURES ................................................................. 8


3/16

Filename : LAN ProtocolDate : 2010-11-10

Classification: Restricted

Page 1 of 12

1. Introduction

1.1 PurposeThe purpose of this document is to detail the steps and items that can be used to control a Philips display via

RJ-45 port.

1.2 Definitions, Abbreviations and AcronymsPBS Professional Business SolutionsRC Remote ControlACK AcknowledgeNACK Not AcknowledgeNAV Not AvailableID Identification0xXX Hexadecimal notationRJ-45 A registered jack (RJ) is a standardized physical network interface - an eight-contact

8P8C plug (used for RJ49, RJ61 and others, but often called "RJ45" because of itsoutward resemblance to the true RJ45)

LAN Local Area NetworkTCP/IP The Internet Protocol Suite is the set of communications protocols used for the

Internet and other similar networks. It is commonly also known as TCP/IP, namedfrom two of the most important protocols in it: the Transmission Control Protocol(TCP) and the Internet Protocol (IP), which were the first two networking protocolsdefined in this standard.

DHCP The Dynamic Host Configuration Protocol (DHCP) is an auto configurationprotocol used on IP networks.


4/16



Page 2 of 12

2. Definitions

2.1 Pinouts for RJ-45 Connector

Pin #Ethernet

10BASE-T

100BASE-TX

1 Transmit +

2 Transmit -

3 Receive +

4 N/A

5 N/A

6 Receive -

7 N/A

8 N/A

Most computer and workstation network adapter cards have interface ports referred to as MDIports (RJ-45 pin assignments shown on the left side of the below drawing). "Uplink" ports onhubs and our displays RJ-45 connector have the same pin assignments. Most normal ports onhubs have MDI-X ports, which use pins 1 and 2 for receive, and pins 3 and 6 for transmit. Astraight cable (one that connects pin 1 to pin 1, pin 2 to pin 2, etc.) can be used to connect anMDI port (a computer) to and MDI-X port (a normal port on a hub). Obviously, to connecttwo MDI ports together, it is necessary to connect pin 1 to pin 3, pin 2 to pin 6, and so forth.

You can use the crossover RJ-45 cable to connect PC and BDL5571V together without a hub, oruse the straight RJ-45 cables to connect PC and BDL5571V together with a hub.


5/16



Page 3 of 12

Default settings for RJ-45 connector:1. RJ-45 female connector. You can use the straight or crossover RJ-45 cable for connection

to the host controller based on different configurations2. DHCP: Disable3. IP Address: 172.16.0.1

4. Subnet Mask: 255.255.0.05. Default Gateway: None

Note:Before using Microsoft Internet Explorer 6.0 or above to control our display, you need to go toOSD Menu\Configuration1\LAN control port to enable it first.


6/16



Page 4 of 12

3. Operating Environments

3.1 Internet Browser VersionsSupported Internet browser version:

Microsoft Internet Explorer 6.0 or above and 1920x1080 resolution are recommended

3.2 Host ControllerPlease make sure you have the LAN card and the corresponding drivers installed on your PC or NB.

3.3 Connection


7/16



Page 5 of 12

4. Begin to configure and operate

4.1 LAN control port enabledBefore you can use the Microsoft IE to control BDL3245E/BDL4245E/BDL4645E, you need to go to OSD

Menu\Configuration1\LAN control port via RC to enable it first and then you can start to configure andsetup the related TCP/IP information.

Note:

By default, this value is set to disable, that is, our display only can be controlled via COM port under thiscondition.

4.2 LAN Network SettingsThe default LAN network settings in BDL3245E/BDL4245E/BDL4645E will be followed:

DHCP: Disable

IP Address: 172.16.0.1

Subnet Mask: 255.255.0.0

Default Gateway: None

You can change or setup the related LAN network settings in OSD Menu or Internet Browser, pleasemake sure to use the Microsoft Internet Explorer 6.0 or higher version for the web browser (the webbrowser should be set to accept JavaScript and Cookies functions), and the TCP/IP configurations ofPC or NB and BDL3245E/BDL4245E/BDL4645E should be in the same subnet, ex.: your IP address andsubnet mask of PC or NB should be 172.16.0.x (x: 2 ~ 254) and 255.255.0.0 based on our default networksettings.

To control BDL3245E/BDL4245E/BDL4645E through Microsoft Internet Browser for the first time, pleasetype the following address in URL:

http://172.16.0.1

At this moment, the related dialog box will pop up, the default username is admin and default passwordis0000.

Note:

1. In order to logon the LAN Control Webpage, please remember to disable the proxy settings first.Example Microsoft Internet Explorer 6.0. In Tools->Internet Options...->Connections->LAN Settings...,

you will find the proxy settings. Dont check checkbox Use a proxy server for your LAN.


8/16



Page 6 of 12

2. If the Ethernet cable was connected to the RJ45 connector, the Green LED of RJ45 connector would be

always turned on. The Orange LED of RJ45 connector will be blinking to indicate the DATA transferring(Send/Receive).

3. On PC side, user can open Command Prompt, and use command ping to check the network status.

Successfully pinging with the IP address of BDL3245E/BDL4245E/BDL4645E (default IPaddress:172.16.0.1) verifies that the BDL3245E/BDL4245E/BDL4645E was successfully added to yournetwork.

4. You need to input the correct username and password and then you just can access the main page inMicrosoft Internet Explorer.

After passing the credential, you can see the main page in Microsoft Internet Brower and then you canconfigure, control and operate our display through our friendly user interface.


9/16



Page 7 of 12

4.3 Configure, Control and OperateYou can change and setup the parameters of display through the LAN Control Webpage.

Example: If you want to change the value of brightness, you can push +/- button to increase/decreasethe value of brightness. You can also press Enter after input value in the edit box.

4.4

Auto Discovery Program

You can execute Auto Discovery Program.exe program. This program will auto discover device(BDL3245E/BDL4245E/BDL4645E) on local network.


10/16

Filename : LAN Protocol BDL5571VDate : 2010-11-10


5. Summary Table for LAN Control Features

MAIN MENUSUB MENU

Function range[s

Picture

Brightness 0-100Contrast 0-100

Sharpness 0-100[4

Black level 0-100

Noise reduction Off, Low, Med

Tint(HUE)INPUT: HDMI-Video timing, YPbPr only

0-100

ColorINPUT: HDMI-Video timing, YPbPr only

0-100

Colortemperature

3000K,4000K,5000K, 6500K, 7500

Color control

User-R (0

User-G (0

User-B (0

Smart contrastOffOn

Smart picture

PC Standard/Hight

VIDEO

Standard/Hight bVideo source VGA/DVI-D/HDMI/Component/Vi

Picture reset OK / Ca

ScreenH position 0-100

V position 0-100


11/16



ClockINPUT: VGA only

0-100

Clock phaseINPUT: VGA only

0-100

Zoom mode

PC:Full/Normal/C

VIDEFull/Normal/Dynamic

Custom zoom

Zoom 0-

H zoom 0

V zoom 0

H position

V position

Screen reset OK / Ca

Audio

Balance 0 to 10Treble 0 to 10

Bass 0 to 10

Volume 0 to 10

MuteOffOn

Audio sourceHDMI source: HDMI/Au

Card OPS source : Card OPOthers source :Audio

Audio reset OK / Ca

PIP

PIPOff

On

PIP inputVideo,S-Video source: HDMI/DVI-D/V

HDMI,DVI,VGA,Component,Car

PIP changeNoYes

PIP size Large/Mediu


12/16



PIP audio Main/S

PIP reset OK / Ca

Configuration 1

Auto adjustINPUT: VGA only

OK / Ca

Power saveRGB (O

Video (O

LanguageEnglish/German/Spanish/French/Italia

Chine

Panel saving

Cooling Fan

Brightness

Pixel shift (Off/10

Network settings

Network ho

DHCP (Enab

IP address xxx

Subnet mask xxx

Default gateway x

Set(No

Configuration

resetOK / Ca

Factory reset OK / Ca

Configuration 2

OSD turn off * SEC(5-120sec

Information OSD 1-60sec[1](O

Sleep timer(Off timer)

1 to 24Hour

OSD H-position 0 to 10

OSD V-position 0 to 10


13/16



Monitorinformation

Model nSerial n

OperationSW ver

LAN Ve

Advanced option

Black level expansionINPUT: VIDEO only High / Medium

Gamma selection 2.2/2.4/S gam

Scan modeINPUT: HDMI-Video timing, DVI-D(HD timing),

DP(HD timing), YPbPr onlyOver scan/ U

Scan conversion Progressive /

Film mode Auto/

IR control

NormLoc

Prima

Second

Keyboard controlLoc

Unlo

Tiling

H mon

V mon

Positi

Frame comp

Enable (N

Switch On Delay

Heat status

Temper

SensoSenso


14/16



Date and time

YeaMon

DayHou

Minu

Daylight saDaylight savingxxx Sunda

Daylight savingxxx Sunda

Correction timeDaylight saving corr

Current daxxxx . xx . xx

Schedule

Today xxxx . xx . xx xxx xx : xx

1 On Off Input

2 00:00 00:00 VGA

34 Every dayMon Tue

5 Wed Thu Fri

6 Sat Sun Every week

7

Monitor ID 1--26

DDC/CIOffOn

Smart power Off(Low)/Me

Auto signal detection

Off

On

Advanced option reset OK / Ca

Power On/Off Power On/Off

On ( OK / C

Off ( OK / C


15/16




16/16

Documents

RJ-45 Application Note_20111024