Upload
dinhliem
View
218
Download
5
Embed Size (px)
Citation preview
RINS1421-1
KX10DP-WE 10m Internal detector
WHITE
3mmABS, 0.4mm HDPE in LensArea
868MHz, FMTransceiver Narrow Band
Fully Encrypted Rolling Code
300m Free Space
Low Noise Pyroelectric Sensor
High, Low
AdvancedAutomatic
10m
74
0.3 - 3.0 m/s
85
CR123A Lithium Battery
Greater than 2 years
2m to 2.8m
Front + Optional RearTamper
-20 C to 50 C
-10 C to 50 C
Wall and ceiling mounting brackets optional
EN55022 Class B
EN50130-4
Model:
Colour:
Casing:
Transmission Frequency:
Tranmission Method:
Transmission Range:
Detection Method:
Sensitivity:
Temperature Compensation:
Detection Range:
Detection Zones:
Detection Speed:
Detection Angle:
Battery:
Battery Life:
Mounting Height:
2.4mNominal Mounting Height:
Tamper Switch:
Storage Temperature:
Operating Temperature:
Accessories:
Emissions:
Immunity:
Pyronix Limited, Secure House, Braithwell Way,Hellaby, Rotherham, S66 8QY. UK
Customer Support Line : +44(0)0845 6434 999or telephone 01709 535225
E-mail: [email protected]: www.pyronix.com
WARRANTY
This product is sold subject to our standard warrantyconditions and is warranted against defects in
workmanship for a period of two years
In the interest of continuing improvement of quality,customer care and design, Pyronix Ltd reserves the
right to amend specifications, without giving priornotice.
(batteriesexcluded)
This product is approved for use in the Residential,Commercial and Light Industrial Environment.
.
Coverage PatternHorizontal Coverage
Vertical Coverage
®
9m
8m
7m
6m
5m
4m
3m
2m
2m 3m 4m 5m 6m 7m 8m 9m m01m1
m01
m1
8574 zones7 planes
O
2m 3m 4m 5m 6m 7m 8m 9m
2.4m
1m
1m
10m
EN50131-2-2:2008EN50131-5-3:2005Security Grade 2Environmental Class II
2
®
KX10DP-WE Specifications®
KX10DP-WE10m Wireless PIR Detector
The detector will tolerate animals of up to 20kg when the height of the animal is less than 1 metre.
1. The detector will tolerate animals of up to 20kg when the height of the animal is less than 1 metre.
2. Do not install the detector looking at stairs.
3. Avoid placing the detector in direct sunlight.
4. Do not mount the detector near heaters or radiators.
5. Do not mount the detector near open windows or air vents.
6. Mount the detector on a stable surface.
CASE LIDSCREW FITTING
NOTE: When mounting the
Part number: FPKXBRACKET
Wall Ceiling
detector, ensure that it isnot tilting backwards.
Installation Wall Mounting
The KX12DW-WE Printed Circuit Board
Learning the KX12DW-WE onto the Enforcer Control Panel
Changing The Battery
Optional Bracket Fitting Dimensions Avoiding False Alarms
69mm(2.72”)
3mm(0.12")
50mm(2.2”)
117mm(4.61”)
Kg = 105g (3.4 oz) without bracket
RINS1421-1
Header On= HIGH)
Header Off= LOW
SENSITIVITY
DIGITAL SIGNALPROCESSING SELECT
To prevent possible damage to components,any static charge on your body needs to beeliminated before touching the inside of theunit. This can be accomplished by touchingsome grounded/earthed metallic conductor
such as a radiator/pipework immediatelybefore replacing the batteries.
The batteries supplied have been chosen toprovide long service life whilst, for safetyreasons, having limited output current.
Replace only with approved batteries.
Tamper Spring
Sensitivity Settings
Piro SensorDO NOT TOUCH
Learn Button
BatteryHeader for Rear Tamper
+ -
When you are ready to learn the device to the control panel receiving equipment, and when the equipment is in the learn mode (see Enforcer Programming Manual) follow the procedure below.
1. Make sure the battery is installed correctly and the plastic wrapping removed.2. Press and Hold the Learn button until the 3 LEDs start cycling through the different colours, then release the Learn button.3. The device is correctly learnt when the Green LED flashes.
The three coloured LEDs give avisual indication of the signalstrength.
Green indicates good signal strength and is a good location to install.
Red indicates poor signalstrength and the device should notbe installed in that position.
If no LED illuminates then the device is completely out of range.
RED BLUE GREEN
The blue LED will illuminate when the device is activated.
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
RED BLUE GREEN
mralA
CR123ALITHIUMBATTERY
+ -
REAR TAMPER
NVM
RES
ET
CR123ALITHIUMBATTERY
+ -
Pet mirror mustnot be removed