Rife Machineposts2

7/27/2019 Rife Machineposts2

1/5

General GB-4000 questions

I sent the following questions to Quantumbalancing but thought I would alsopost them here. One of the questions was answered before by someone on

this forum but I have no idea where he got the info.

First of all, HAPPY NEW YEAR! I love my GB but the more I use it the more

questions I come up with. (1) Is there any distinct advantage to using thegate feature? (2) I currantly have the gate set at 64 hz, 75% duty cycle.Does that make sense? (3) What is the difference between the 90% dutycycle that the GB has for a default and the duty cycle in the gate feature?(4) What is the best % for the modulation. I believe the default is 100%.What would be the purpose of changing it? (5) What is the output (voltageand watts)of the GB without the amplifier? I am trying to compare it to my

ProWave Model 101 and F125 which I also use occasionally for otherreasons. (6) I have purchased a IR/BPT-500 R/B Plasma Device from Dave

Trebing at Vibrant Health and would like to be able to use the GB as a signalsource. I plan to use a female BNC adapter to banana plug cable to connectthe two. Should I keep the amplitude all the way down on the GB (no

amplifier, of course)? (7) In the operating instruction, it lists the gate rate at5-75 Hz but the generator display gives the rate as 5-2200 Hz. Which iscorrect? (8) Regarding program #114, how is it to be run? The amp cannotbe used, correct? How can you run freqs below 1 mHz on square wave andfreqs above 1mhz on sine wave all in the same program? Would I be correct

in assuming that program #114 is best run on sine wave, in RF mode,without the amp? (9) Regarding sweeps, if I do a sweep from, lets say, from

2000 to 2600, does it sweep at 1hz increments? Can the sweep incrementbe changed? At 5 minutes sweep time, would that mean that each freq gets

hit for .5 second each? Thanks, Mike

Mike Kirkpatrick

View Public Profile

Send a private message to Mike Kirkpatrick

Send email to Mike Kirkpatrick

Find More Posts by Mike Kirkpatrick

Add Mike Kirkpatrick to Your Buddy List

09-11-2007, 21:41 #2

Frank VerdiSpecialist

Join Date: Nov 2006Location: Tempe, AZ, USASpeciality: Health PractitionerDevice: GB4000, EMEM7, TeslaRegenerator, Body Enhancer,Zephyr/InSpiral MWO, P Pulsar II, SOTA,etc...Posts: 321

General GB-4000 Programming Info...

Received GB-4000 programming information fromJames/Quantum Balancing Figured there might be someothers who missed this same info in the manuals, etc. so hereit is:

For the GB-4000 the default time for each autoprogram group

is 5 minutes:

CHANGING DEFAULT TIME FOR AUTOPROGRAMS

1)At the start prompt, input the time desired for each group2)Press AutoChannel key

3)Input number of the autoprogram desired4)Press Run key
http://www.rifeforum.com/forum/member.php?u=3677http://www.rifeforum.com/forum/private.php?do=newpm&u=3677http://www.rifeforum.com/forum/sendmessage.php?do=mailmember&u=3677http://www.rifeforum.com/forum/search.php?do=finduser&u=3677http://www.rifeforum.com/forum/profile.php?do=addlist&userlist=buddy&u=3677http://www.rifeforum.com/forum/showpost.php?p=7649&postcount=2http://www.rifeforum.com/forum/showpost.php?p=7649&postcount=2http://www.rifeforum.com/forum/member.php?u=4065http://www.rifeforum.com/forum/member.php?u=4065http://www.rifeforum.com/forum/newreply.php?do=newreply&p=5376http://www.rifeforum.com/forum/newreply.php?do=newreply&p=5376http://www.rifeforum.com/forum/report.php?p=5376http://www.rifeforum.com/forum/reputation.php?p=5376http://www.rifeforum.com/forum/private.php?do=newpm&u=3677http://www.rifeforum.com/forum/sendmessage.php?do=mailmember&u=3677http://www.rifeforum.com/forum/search.php?do=finduser&u=3677http://www.rifeforum.com/forum/profile.php?do=addlist&userlist=buddy&u=3677http://www.rifeforum.com/forum/showpost.php?p=7649&postcount=2http://www.rifeforum.com/forum/member.php?u=4065http://www.rifeforum.com/forum/member.php?u=3677


2/5

Note that this is the same procedure as changing the defaultsingle frequency time except the Enter key is not pressedbetween Step 1 and Step 2.

RUNNING CONSECUTIVE AUTOPRAMS

1)At the start prompt, press AutoChannel key

2)Input number of the autoprogram desired3)Press +/MOD key4)Input number of the next autoprogram desired5)Press +/MOD key6)Continue.7)Press number of the last autoprogram desired8)Press Run key

Up to 10 autoprograms can be linked this way and run withoutinterruption.

Frank

Frank Verdi

View Public Profile

Send a private message to Frank Verdi

Visit Frank Verdi's homepage!

Find More Posts by Frank Verdi

Add Frank Verdi to Your Buddy List

12-05-2007, 21:20 #3


Join Date: Nov 2006Location: Tempe, AZ, USASpeciality: Health PractitionerDevice: GB4000, EMEM7, Tesla

Regenerator, Body Enhancer,Zephyr/InSpiral MWO, P Pulsar II,SOTA, etc...Posts: 321

GB-4000 Multiple Frequency Power Requirements...

One of the questions I wonder about is the power requirementsfor running multiple frequencies concurrently.

The GB-4000 can run up to 8 frequencies at the same time (for


3/5



12-07-2007, 00:33 #4

Paul GruszkaNormalJoin Date: Jan 2007Location: Middlesex, UKSpeciality: EngineerDevice: my ownPosts: 121

Re: General GB-4000 questions

Hi FrankI can explain what happens to 8 frequencies added together perfectly

from an engineering point of view. If you were to filter out each

wave and look at them you would simultaneously see each wave and

hence the peaks would all be the same giving the same power to

each the same as if they were run separately. Its really a question of

how good the algorithm is in the digital summing of the waves.

Obviously nothing is perfect and digital devices have a resolution,

which is ultimately their master clock. Whether this jitter affects the

waves or adds harmonics is down to how much faster the clock is in

relation to the wave being generated. Hope this helps.

ThanksPaul

Paul Gruszka

View Public Profile

Send a private message to Paul Gruszka

Find More Posts by Paul Gruszka

Add Paul Gruszka to Your Buddy List

07-06-2008, 05:39 #5


Join Date: Nov 2006Location: Tempe, AZ, USASpeciality: Health PractitionerDevice: GB4000, EMEM7, TeslaRegenerator, Body Enhancer,

Zephyr/InSpiral MWO, P Pulsar II,SOTA, etc...Posts: 321

General GB-4000 questions

I must confess that either I do not know or I've forgotten the

difference between an "audio" wave output & a "radio" waveoutput - The GB4000 makes a great distinction here.

Is it simply that the radio wave runs with the carrier while theaudio does not?

Subjectively, the audio puts out a jolt felt much more stronglythan the radio - The radio has better penetration & alwaysblows out whatever program my laptop is executing...

Since there exist the two different outputs, what are the majoradvantages/disadvantages of running one as opposed to the

other?

Frankwww.electronhealth.com

Frank Verdi

View Public Profile



http://www.rifeforum.com/forum/search.php?do=finduser&u=4065http://www.rifeforum.com/forum/profile.php?do=addlist&userlist=buddy&u=4065http://www.rifeforum.com/forum/showpost.php?p=8256&postcount=4http://www.rifeforum.com/forum/showpost.php?p=8256&postcount=4http://www.rifeforum.com/forum/member.php?u=4204http://www.rifeforum.com/forum/member.php?u=4204http://www.rifeforum.com/forum/private.php?do=newpm&u=4204http://www.rifeforum.com/forum/search.php?do=finduser&u=4204http://www.rifeforum.com/forum/profile.php?do=addlist&userlist=buddy&u=4204http://www.rifeforum.com/forum/showpost.php?p=9158&postcount=5http://www.rifeforum.com/forum/showpost.php?p=9158&postcount=5http://www.rifeforum.com/forum/member.php?u=4065http://www.electronhealth.com/http://www.rifeforum.com/forum/member.php?u=4065http://www.rifeforum.com/forum/private.php?do=newpm&u=4065http://www.electronhealth.com/http://www.rifeforum.com/forum/search.php?do=finduser&u=4065http://www.rifeforum.com/forum/newreply.php?do=newreply&p=9158http://www.rifeforum.com/forum/newreply.php?do=newreply&p=9158http://www.rifeforum.com/forum/report.php?p=9158http://www.rifeforum.com/forum/reputation.php?p=9158http://www.rifeforum.com/forum/member.php?u=4065http://www.rifeforum.com/forum/newreply.php?do=newreply&p=8256http://www.rifeforum.com/forum/newreply.php?do=newreply&p=8256http://www.rifeforum.com/forum/report.php?p=8256http://www.rifeforum.com/forum/reputation.php?p=8256http://www.rifeforum.com/forum/search.php?do=finduser&u=4065http://www.rifeforum.com/forum/profile.php?do=addlist&userlist=buddy&u=4065http://www.rifeforum.com/forum/showpost.php?p=8256&postcount=4http://www.rifeforum.com/forum/member.php?u=4204http://www.rifeforum.com/forum/member.php?u=4204http://www.rifeforum.com/forum/private.php?do=newpm&u=4204http://www.rifeforum.com/forum/search.php?do=finduser&u=4204http://www.rifeforum.com/forum/profile.php?do=addlist&userlist=buddy&u=4204http://www.rifeforum.com/forum/showpost.php?p=9158&postcount=5http://www.rifeforum.com/forum/member.php?u=4065http://www.electronhealth.com/http://www.rifeforum.com/forum/member.php?u=4065http://www.rifeforum.com/forum/private.php?do=newpm&u=4065http://www.electronhealth.com/http://www.rifeforum.com/forum/search.php?do=finduser&u=4065


4/5


11-16-2008, 21:10 #6


Join Date: Nov 2006Location: Tempe, AZ, USASpeciality: Health PractitionerDevice: GB4000, EMEM7, TeslaRegenerator, Body Enhancer,Zephyr/InSpiral MWO, P Pulsar II,SOTA, etc...Posts: 321

General GB-4000 questions - Sweep Function

Answer discovered...Last edited by Frank Verdi : 11-16-2008 at21:17. Reason: KINDLY DELETE POST

Frank Verdi

View Public Profile





11-17-2008, 13:17 #7

Angad SinghNormalJoin Date: Sep 2008Location: Punjab, IndiaSpeciality: Computer ExpertDevice: Frex PFA-3 With Cylinders,Pads,Posts: 75

Re: General GB-4000 questions - Sweep Function

Also Please tell me the answer, I am interested...

Angad Singh

View Public Profile

Send a private message to Angad Singh

Send email to Angad Singh

Find More Posts by Angad Singh

Add Angad Singh to Your Buddy List

12-16-2008, 14:38 #8

ScottGreenappleNoviceJoin Date: Dec 2008Location: NC, USAPosts: 3


I am new to the forum. I am considering buying a GB-4000 orJW labs unit. Any comments on experience. I am aChiropractor/ acupuncture using many modalities, including

lasers both class 3 and 4. Also using Frequency specificMicrocurrent. I am a triathlete, one year ago developed very

high levels of Epstein Barr and now fighting that as well aschronic fatigue. I will use the machine on myself and then offerto my patients. John Wright at JWlabs has been most helpfull
http://www.rifeforum.com/forum/profile.php?do=addlist&userlist=buddy&u=4065http://www.rifeforum.com/forum/showpost.php?p=9855&postcount=6http://www.rifeforum.com/forum/showpost.php?p=9855&postcount=6http://www.rifeforum.com/forum/member.php?u=4065http://www.rifeforum.com/forum/member.php?u=4065http://www.rifeforum.com/forum/private.php?do=newpm&u=4065http://www.electronhealth.com/http://www.rifeforum.com/forum/search.php?do=finduser&u=4065http://www.rifeforum.com/forum/profile.php?do=addlist&userlist=buddy&u=4065http://www.rifeforum.com/forum/showpost.php?p=9859&postcount=7http://www.rifeforum.com/forum/showpost.php?p=9859&postcount=7http://www.rifeforum.com/forum/member.php?u=6011http://www.rifeforum.com/forum/member.php?u=6011http://www.rifeforum.com/forum/private.php?do=newpm&u=6011http://www.rifeforum.com/forum/sendmessage.php?do=mailmember&u=6011http://www.rifeforum.com/forum/search.php?do=finduser&u=6011http://www.rifeforum.com/forum/profile.php?do=addlist&userlist=buddy&u=6011http://www.rifeforum.com/forum/showpost.php?p=10171&postcount=8http://www.rifeforum.com/forum/showpost.php?p=10171&postcount=8http://www.rifeforum.com/forum/member.php?u=6225http://www.rifeforum.com/forum/member.php?u=6225http://www.rifeforum.com/forum/newreply.php?do=newreply&p=9859http://www.rifeforum.com/forum/newreply.php?do=newreply&p=9859http://www.rifeforum.com/forum/report.php?p=9859http://www.rifeforum.com/forum/reputation.php?p=9859http://www.rifeforum.com/forum/newreply.php?do=newreply&p=9855http://www.rifeforum.com/forum/newreply.php?do=newreply&p=9855http://www.rifeforum.com/forum/report.php?p=9855http://www.rifeforum.com/forum/reputation.php?p=9855http://www.rifeforum.com/forum/member.php?u=4065http://www.rifeforum.com/forum/profile.php?do=addlist&userlist=buddy&u=4065http://www.rifeforum.com/forum/showpost.php?p=9855&postcount=6http://www.rifeforum.com/forum/member.php?u=4065http://www.rifeforum.com/forum/member.php?u=4065http://www.rifeforum.com/forum/private.php?do=newpm&u=4065http://www.electronhealth.com/http://www.rifeforum.com/forum/search.php?do=finduser&u=4065http://www.rifeforum.com/forum/profile.php?do=addlist&userlist=buddy&u=4065http://www.rifeforum.com/forum/showpost.php?p=9859&postcount=7http://www.rifeforum.com/forum/member.php?u=6011http://www.rifeforum.com/forum/member.php?u=6011http://www.rifeforum.com/forum/private.php?do=newpm&u=6011http://www.rifeforum.com/forum/sendmessage.php?do=mailmember&u=6011http://www.rifeforum.com/forum/search.php?do=finduser&u=6011http://www.rifeforum.com/forum/profile.php?do=addlist&userlist=buddy&u=6011http://www.rifeforum.com/forum/showpost.php?p=10171&postcount=8http://www.rifeforum.com/forum/member.php?u=6225http://www.rifeforum.com/forum/member.php?u=6225


5/5

but I am also intrigued by GB 4000. Any comments I woudlgreatly appreciate.

Scott Greenapple

View Public Profile

Send a private message to Scott Greenapple

Find More Posts by Scott Greenapple

Add Scott Greenapple to Your Buddy List

12-21-2008, 18:01 #9


Join Date: Nov 2006Location: Tempe, AZ, USASpeciality: Health PractitionerDevice: GB4000, EMEM7, TeslaRegenerator, Body Enhancer,Zephyr/InSpiral MWO, P Pulsar II, SOTA,etc...Posts: 321


Scott:

I have purchased a couple of systems from Thomas Lum,Pacific Health Online - He has dabbled with just about every

Rife system & I know personally that he has used bothJWLabs & GB-4000 units.

He is probably one of the best sources to give you a directcomparison between the two products.

You can phone him directly as he sells several different Rife

configurations & also expect to hear about Atelier Robin unitswhich I believe to be his preference.

www.pachealthonline.com

Frankwww.electronhealth.com
http://www.rifeforum.com/forum/member.php?u=6225http://www.rifeforum.com/forum/private.php?do=newpm&u=6225http://www.rifeforum.com/forum/search.php?do=finduser&u=6225http://www.rifeforum.com/forum/profile.php?do=addlist&userlist=buddy&u=6225http://www.rifeforum.com/forum/showpost.php?p=10215&postcount=9http://www.rifeforum.com/forum/showpost.php?p=10215&postcount=9http://www.rifeforum.com/forum/member.php?u=4065http://www.pachealthonline.com/http://www.electronhealth.com/http://www.rifeforum.com/forum/report.php?p=10215http://www.rifeforum.com/forum/reputation.php?p=10215http://www.rifeforum.com/forum/member.php?u=4065http://www.rifeforum.com/forum/newreply.php?do=newreply&p=10171http://www.rifeforum.com/forum/newreply.php?do=newreply&p=10171http://www.rifeforum.com/forum/report.php?p=10171http://www.rifeforum.com/forum/reputation.php?p=10171http://www.rifeforum.com/forum/member.php?u=6225http://www.rifeforum.com/forum/private.php?do=newpm&u=6225http://www.rifeforum.com/forum/search.php?do=finduser&u=6225http://www.rifeforum.com/forum/profile.php?do=addlist&userlist=buddy&u=6225http://www.rifeforum.com/forum/showpost.php?p=10215&postcount=9http://www.rifeforum.com/forum/member.php?u=4065http://www.pachealthonline.com/http://www.electronhealth.com/

Documents

Rife Machineposts2