8
PRECISION IDEAS HGR HYDRAULIC SHEAR

RICO HGR Shear EN

Embed Size (px)

DESCRIPTION

RICO HGR Hydraulic Shear Catalog

Citation preview

Page 1: RICO HGR Shear EN

PRECISION IDEAS

HGRHYDRAULIC SHEAR

Page 2: RICO HGR Shear EN

HGR HYDRAULIC SHEARVERTICAL CUTTING HYDRAULIC SHEAR WITH A VARIABLE

CUTTING ANGLE AVAILABLE FROM 2.5M UNTIL 6M TO CUT

STEEL FROM 4 TO 30MM OF THICKNESS.

Page 3: RICO HGR Shear EN

PRECISION IDEAS

MAIN CHARACTERISTICSThe RICO shears are machines of vertical cut (the blade beam is supported by bearings) allowing different angle depending on the thickness of the plate, situation that can’t be possible in swing beam cutting machines, where the angle is steady.

This solution is most effective to reduce the “twist plate” in more demanding services as it allows the machine a longer life with low maintenance, either in the slip of the blade beam, or the movement of the back gauge through hardened ball screws with high-quality.

OPERATIONThe blade beam is supported on bearings over the whole length.These are adjustable in each point, which would guarantee a complete accomplishment. The cylinders are installed in the structure in single unit working vertically. Once the blade beam is supported by bearing in the entire length, the friction is zero and the deformation of machine is controlled.

BACK GAUGEThe back gauge is equipped with hardened ball screws of high quality, thereby ensuring high accuracy, speed and durability.Incorporated with the RAE system, allows retracting automatically during the cut.

TABLEThe handling of the plate to be cut is a factor that we consider very important in a shear. For this, we constructed a large table, equipped with transfer balls, of high quality, in all length of the machine. In addition, it is equipped with a square support with a millimetre scale and support plate adaptable to various points in the table. The blades protection ensures a safety work and is fitted with polycarbonate windows with cutting line properly illuminated in order to maintain good visibility.

STRUCTUREThe structure of the shear HGR is designed to ensure the best balance and less deformation during cutting. It is a single unit construction welded and reinforced sheet-quality and certified, properly sized.

Page 4: RICO HGR Shear EN

STANDARD EQUIPMENT- Automatic back gauge with digital “ELGO 9511”- Back gauge equipped with ball screws- Easy datum for back gauge and protected by a key- Square support arm with 1000mm scale and flip

stop- Front support arm with 1000mm- Hold-down jacks equipped with Teflon- Variable rake angle- Blades gap adjustment- RAE System: Automatic rectraction of back gauge- Variable cutting length- Lighting the cutting line- Continuous cut or cycle to cycle- Independent plate clamping (pre-selected)- Front table with transfer balls- Time counter- Posterior protection with light barrier- Control panel in swivel arm- Mechanism of higher order (command panel)- Machine controlled by a controller (PLC)- Frequency inverter for back gauge motor control- Easy system to purge the hydraulic circuit

OPTIONAL EQUIPMENT- MAC1 pneumatic sheet support table- MAC2 pneumatic sheet support table- MAC3 pneumatic support table with plate

extraction (on request)- FSE frontal plate extraction system - Frontal digital measuring device with length

on request- Frontal arms supported on pedestal with

length on request- Manual protractor with scale

RAE SYSTEM (standard)As it is usual in the shear cutting, during the movement, the plate is pressed against the back gauge. This strength may cause deformations either on the plate or in the back gauge (for large strength).With RAE system, the back gauge automatically pulls away during the cut not being subject to the plate charge.

Control panel

Frontal simple supportSquare support

Protractor

Page 5: RICO HGR Shear EN

MAC1 PNEUMATIC SHEET SUPPORT TABLE (OPTIONAL)Mac1 system is used to support thin plate, ensuring the linearity of the plate and the right measure to cut. The operation is done by two synchronized pneumatic cylinders with the movement of the blade beam.

MAC2 PNEUMATIC SHEET SUPPORT TABLE (OPTIONAL)Mac2 system is an evolution of Mac1. The support is guaranteed by multiple cylinders equipped on guiding and ball recirculation installed on the back gauge.

FSE FRONTAL PLATE EXTRACTION SYSTEM (OPTIONAL)The FSE system allows cutting small sheet dimensions with the extraction from the front of the machine. The cut sheets are stored in a drawer equipped with pulleys to allow easy opening.

Note: In case of application of support system plate, one must consider the Mac2.Length max.: 550mm / Width max.: 450mm

PRECISION IDEAS

Page 6: RICO HGR Shear EN

Mod

el

Leng

th Stee

l (4

5 Kg

s/m

m2)

Stai

nles

s St

eel

(70

Kgs/

mm

2)

Rake

Ang

le

Angl

e >

Angl

e <

Hold

Dow

n Ja

cks

Back

Gau

ge S

trok

e

Thro

at D

epth

Mot

or P

ower

Oil C

apac

ity

Tota

l Len

gth

(A)

Tota

l Hei

ght (

B)

Tota

l Wid

th (C

)

Heig

th u

nder

the

Floo

r

Apro

x. W

eigh

t

Thickness Strokes by Min Dimensions

mm mm º qt qt mm mm mm mm KgHGR 204 2050 4 2.5 1,5/1 22 29 12 700 135 7.5 50 2470 1720 2150 0 3750HGR 206 2050 6 4 1,5/1 22 26 12 1000 155 15 90 2470 1790 2460 0 4500HGR 208 2050 8 5 2 / 1,5 14 18 12 1000 205 15 130 2510 1980 2475 0 5750HGR 254 2550 4 2.5 1,5 / 1 17 23 14 700 135 7.5 50 2970 1720 2150 0 4600HGR 256 2550 6 4 1,5 / 1 17 21 14 1000 155 15 95 2970 1790 2460 0 5140HGR 258 2550 8 5 2 / 1,5 13 16 14 1000 205 15 130 3000 1980 2475 0 6500HGR 304 3050 4 2.5 1,3 / 1 17 23 17 700 135 7.5 70 3470 1720 2150 0 5200HGR 306 3050 6 4 1,5 / 1 17 21 17 1000 155 15 100 3470 1790 2460 0 6000HGR 308 3050 8 5 2 / 1,5 10 12.5 17 1000 205 15 130 3500 1980 2475 0 7760HGR 310 3050 10 7 2 / 1,5 10 12.5 17 1000 205 20 130 3510 1980 2500 0 8700HGR 313 3050 13 8 2 / 1,5 8 10 17 1000 210 20 160 3520 2190 3280 0 11150HGR 316 3050 16 12 3 / 1,5 7 14 17 1000 220 30 250 3585 2280 3295 0 12360HGR 320 3050 20 14 3 / 2 5.5 7 17 1200 215 50 465 3650 2620 3655 0 19200HGR 325 3050 25 17 3/2 5 7 17 1200 215 50 465 3650 2620 3655 0 21500HGR 404 4050 4 2.5 1,5 / 1 11 15 22 1000 155 10 110 4471 1770 2470 0 7350HGR 406 4050 6 4 1,5 / 1 12 15 22 1000 155 15 145 4500 1970 2495 0 9640HGR 408 4050 8 5 2 / 1,5 7 10 22 1000 205 15 150 4510 2050 2520 0 12300HGR 410 4050 10 7 2 / 1,5 7 9 22 1000 205 20 175 4530 2220 2830 0 13500HGR 413 4050 13 8 2 / 1,5 7 9 22 1000 210 20 175 4530 2220 3320 0 14500HGR 416 4050 16 12 3 / 1,5 4 8 22 1000 220 30 250 4570 2630 3320 0 19000HGR 420 4050 20 14 3 / 2 4 6 22 1200 215 50 465 4670 2750 3755 0 24500HGR 604 6100 4 2.5 1,2 / 0,6 9 14 31 1000 264 15 135 6520 2270 3065 0 17300HGR 606 6100 6 4 1,5 / 1 9 12 31 1000 272 15 135 6560 2270 3065 0 23000HGR 608 6100 8 5 2 / 1,5 6 9 31 1000 265 20 190 6600 2570 3305 0 28700HGR 610 6100 10 7 2,3 / 1,5 4 5 31 1000 277 20 190 6640 2680 3550 0 33800HGR 613 6100 13 8 2,3 / 1,5 4 5 31 1200 277 20 235 6730 3000 3820 910 49500

HGR TECHNICAL CHARACTERISTICS

Page 7: RICO HGR Shear EN

HGR MATICM

odel

Leng

th Stee

l (4

5 Kg

s/m

m2)

Stai

nles

s St

eel

(70

Kgs/

mm

2)

Rake

Ang

le

Angl

e >

Angl

e <

Hold

Dow

n Ja

cks

Back

Gau

ge S

trok

e

Thro

at D

epth

Mot

or P

ower

Oil C

apac

ity

Tota

l Len

gth

(A)

Tota

l Hei

ght (

B)

Tota

l Wid

th (C

)

Heig

th u

nder

the

Floo

r

Apro

x. W

eigh

t

Thickness Strokes by Min Dimensions

mm mm º qt qt qt mm mm Hp/Cv Lts mm mm mm mm KgHGR MATIC 204 2050 4 2.5 1,5 / 0,7 22 33 12 700 135 7.5 50 2470 1720 2150 0 3750HGR MATIC 206 2050 6 4 1,5 / 0,7 22 30 12 1000 155 15 90 2470 1720 2460 0 4500HGR MATIC 208 2050 8 5 2 / 0,7 14 21 12 1000 205 15 130 2510 1980 2475 0 5750HGR MATIC 254 2550 4 2.5 1,5 / 0,7 17 27 14 700 135 7.5 50 2970 1720 2150 0 4600HGR MATIC 256 2550 6 4 1,5 / 0,7 17 25 14 1000 155 15 95 2970 1790 2460 0 5140HGR MATIC 258 2550 8 5 2 / 1 13 20 14 1000 205 15 130 3000 1980 2475 0 6500HGR MATIC 304 3050 4 2.5 1,3 / 0,6 17 27 17 700 135 7.5 70 3470 1720 2150 0 5200HGR MATIC 306 3050 6 4 1,5 / 0,6 17 25 17 1000 155 15 100 3470 1790 2460 0 6000HGR MATIC 308 3050 8 5 2 / 1 10 16 17 1000 205 15 130 3500 1980 2475 0 7760HGR MATIC 310 3050 10 7 2 / 1 10 16 17 1000 205 20 130 3510 1980 2500 0 8700HGR MATIC 313 3050 13 8 2 / 1 8 12 17 1000 210 20 160 3520 2190 3280 0 11150HGR MATIC 316 3050 16 12 3 / 1,5 7 14 17 1000 220 30 250 3585 2280 3295 0 12360HGR MATIC 320 3050 20 14 3 / 1,5 5.5 9 17 1200 215 50 465 3650 2620 3655 0 19200HGR MATIC 325 3050 25 17 3 / 1,5 5 9 17 1200 215 50 465 3650 2620 3655 0 21500HGR MATIC 404 4050 4 2.5 1,5 / 0,7 11 18 22 1000 155 10 110 4471 1770 2470 0 7350HGR MATIC 406 4050 6 4 1,5 / 0,7 12 18 22 1000 155 15 145 4500 1970 2495 0 9640HGR MATIC 408 4050 8 5 2 / 1 7 12 22 1000 205 15 150 4510 2050 2520 0 12300HGR MATIC 410 4050 10 7 2 / 1 7 11 22 1000 205 20 175 4530 2220 2830 0 13500HGR MATIC 413 4050 13 8 2 / 1 7 11 22 1000 210 20 175 4530 2220 3320 0 14500HGR MATIC 416 4050 16 12 3 / 1,5 4 8 22 1000 220 30 250 4570 2630 3320 0 19000HGR MATIC 420 4050 20 14 3 / 1,5 4 7 22 1200 215 50 465 4670 2750 3755 0 24500HGR MATIC 604 6100 4 2.5 1,2 / 0,6 9 14 31 1000 264 15 135 6520 2270 3065 0 17300HGR MATIC 606 6100 6 4 1,5 / 0,7 9 14 31 1000 272 15 135 6560 2270 3065 0 23000HGR MATIC 608 6100 8 5 2 / 0,7 6 12 31 1000 265 20 190 6600 2570 3305 0 28700HGR MATIC 610 6100 10 7 2,3 / 1,1 4 7 31 1000 277 20 190 6640 2680 3550 0 33800HGR MATIC 613 6100 13 8 2,3 / 1,1 4 7 31 1200 277 20 235 6730 3000 3820 910 49500

The HGR Matic model is the evolved version of the HGR shear. This is a CNC machine with fully automatic setting. The cutting angle is progressive, so the numerical control calculates the exact angle having in mind the kind of material and thickness of the plate.

- Delem DAC-360 control;- Continuous cut / Sensitive cut;- Automatic and progressive rake angle adjustment;- Automatic back gauge;- Automatic adjustment of blades gap;- Automatic cutting length;- Retract function;- Manual mode, automatic mode;- Materials data base.

PRECISION IDEAS

Page 8: RICO HGR Shear EN

RICO - TOMÁS CASTRO SILVA, LDA.RUA DE CERQUIDOZEBREIROS4515-118 | FOZ DO SOUSAGONDOMAR | PORTUGAL

SALES DEPARTMENTT. +351 224 542 923TM. +351 963 184 770F. +351 224 541 [email protected]

T. +351 224 540 370F. +351 224 541 424E. [email protected]

AGENT