rhinestone application

1 2 3 4

5 6

7

8

9

Wash and dry clothesinside out. Only use designsmarked as rhinestonetemplates.

Use extreme caution whenoperating a hot iron. Keepout of reach of children.

Select a rhinestone template. DoNOT resize it. Feed the templatematerial into the Silhouette on a cutting mat. Select media type “rhinestone template material” inSilhouette Studio® and cut.

Remove iron, cloth and transfertape. If rhinestones continue tostick to the transfer tape, replacecloth and iron again at a hottersetting.

Turn the garment inside out andrepeat step 7. This will pull theglue into the fabric.

Once all of the rhinestones arepositioned face-up in the template,cover the design with a piece ofrhinestone transfer tape.

Lift the transfer tape off thetemplate and position the design on the desired surface.The rhinestones will stick tothe transfer tape.

Place a thin cloth over the designand press down on top with aheated iron for 45-60 seconds.The iron should be set to the“wool” setting.

Peel the template material off thebacking leaving the circle cutoutsbehind. For best results, peel thematerial off in one quick motion.

Affix the template material to arhinestone backing board.Pour rhinestones onto template.

Gently brush the rhinestones ina circular motion until all theholes are filled. Brush awayexcess rhinestones.