RF195AC RF197AC RF215AC RF217AC Samsung Bottom Mount Refrigerator

BOTTOM MOUNT FREEZER

MODEL NAME : RF195AC RF197ACRF215AC RF217AC

REFRIGERATOR

REFRIGERATOR CONTENTS1. PRECAUTIONS(SAFETY WARNINGS)

2. PRODUCT SPECIFICATIONS

3. DISASSEMBLY AND REASSEMBLY

4. TROUBLESHOOTING

5. EXPLODED VIEW & PARTS LIST

6. PCB DIAGRAM

7. WIRING DIAGRAM

8. SCHEMATIC DIAGRAM

For the latest parts information, Please access to our service web site(North America : http://service.samsungportal.com)

IMPORTANT SAFETY NOTICEThe service guide is for service men with adequate backgrounds ofelectrical, electronic, and mechanical experience. Any attempt to repaira major appliance may result in personal injury and property damage.The manufacturer or dealer cannot be responsible for the interpretationof this information.

SAMSUNG ELECTRONICS AMERICA, INC.Technical Service Guide

Copyright 2009

All rights reserved. This service guide may not be reproduced in whole or inpart in any form without written permission from the SAMSUNG ELECTRONICSCompany.

WARNING

1. PRECAUTIONS(SAFETY WARNINGS) ······························4

2. Product Specifications ·····································72-1) Introduction of Main Function ································72-2) Specifications ······································82-3) Interior Views ······································92-4) Model Specification ···································102-5) Model Specification &Specification Chart ··························112-6)Dimensions of Refrigerator (Inches)·····························142-7) Refrigerant Route in Refrigeration cycle···························152-8) Cooling Air Circulation ··································16

3. Disassembly and Reassembly ··································173-1) PRECAUTION······································173-2) Refrigerator Door ····································183-3) Freezer Door(RF195)···································193-3) Freezer Door(RF217,RF197) ·······························203-4) Freezer Door Switch ···································213-5) Refrigerator Light ····································223-6) Glass shelves ······································223-7) Moving tray ·······································233-8) Vegetable & Fruit Drawers Shelf ······························233-9) Gallon Door Bin ·····································243-10) Evaporator In Refrigerator ································243-11) Door Handle Freezer ··································263-12) Freezer Light······································263-13) Evaporator Cover In Freezer ·······························273-14) Evaporator InFreezer ··································273-15) Motor Fan ·······································28

4. TROUBLESHOOTING ·····································304-1) Check items before failure diagnosis ····························304-2) Diagnostic method according to the trouble symptom(Flow Chart) ···············41

5 . Exploded View & PARTS LIST ·································595-1) Freezer·········································595-2) Refrigerator ·······································625-3) Cabinet·········································675-4) Disassembly of Freezer Door ·······························705-5) Disassembly of Refrigerator Door Left ···························735-6) Disassembly of Refrigerator Door Right ··························765-1) Freezer·········································785-2) Cabinet·········································815-3) Disassembly of Freezer Door ·······························84

6. PCB DIAGRAM ········································866-1) PCB L ayout with part position (Main Board) ························866-2) Connector Layout with part position (Main Board) ······················87

7. Wiring Diagram ········································88

8. Schematic Diagram ······································898-1) Refrigerator Block Diagram ································898-2) Main ··········································90

Contents

4

1. PRECAUTIONS(SAFETY WARNINGS)

Due to the risk of electric shock, be sure to unplug the unit before servicing.

Use the right electronic equipment for your new Refrigerator.

Make sure to check out the right model name, rated voltage and current, operating

temperature, etc.

Upon repair, make sure that harnesses are not to be water-penetrated and are bundled tight.

Should not be detached by a certain amount of external force.

Upon repair, completely remove dust or other foreign substances from housing, harness,

connector, etc.

To prevent fire by tracking, short, etc.

After repair, check out the assembled state of parts.

It should be the same as the previous state.

Check out the surrounding conditions.

Change the location, if the fridge is located at humid, wet places or the installed state is

unstable.

If needed, ground the fridge.

Especially, if there is a possibility of electric leakage, ground is indispensable.

Do not allow consumers to overload a certain outlet.

Check out whether the power cord or the outlet is broken, squeezed, chopped off or heat-

deformed.

Repair or replace the defective power cord/outlet immediately.

Make sure the power cord is not punctuated or stomped down.

Do not allow consumers to keep food unstable or place bottles in the Freezer Room.

Do not allow consumers to repair the fridge for themselves.

Do not allow consumers to keep things except for food.

Pharmaceutical, Chemical substances : These are not possible to be fine-Controlled with a

consumer fridge.

Flammable material (alcohol, benzene, ether, LPG, etc) : possibility of explosion.

5

PRECAUTIONS(SAFETY WARNINGS)

Read all instructions before repairing the product and keep to the instructionsin order to prevent danger or property damage.

CAUTION/WARNING SYMBOLS DISPLAYED SYMBOLS

Indicates that adanger of deathor serious injuryexists.

Indicates that a riskof personal injuryor material damageexists.

means Prohibition”.

means Do not disassemble”.

means No contact”.

means The things to be followed”.

means Earth to prevent Electricshock”.

means Power cord should beunplugged from the consent”

Due to risk of electric shock, be sure tounplug the unit before servicing.

It may cause electric shock.

Warning

Warning & Caution

Caution

Unplug

Use the rated components on thereplacement. Check the correct model, rated voltage,

rated current, operating temperature and so on.

On repair, make sure that the wires such as harness are bundled tightly. Bundle tightly wires in order not to be detached

by the external force and then not to be wetted.

Check if there is any trace indicating thepermeation of water. If there is that kind of trace, change

the related components or do the necessary treatment such as taping using the insulating tape.

After repair, check the assembled state ofcomponents. It must be in the same assembled state

when compared with the state before disassembly.

On repair, remove completely dust orother things of housing parts, harnessparts, and check parts. Cleaning may prevent the possible fire by tracking

or short.

Ratedcomponents

6

PRECAUTIONS(SAFETY WARNINGS)

Please ler users know following warnings & cautions in detail.

Do not allow users to put bottles or kinds ofglass in the freezer.

Freezing of the contents may inflict a wound.

Do not allow users to store narrow andlengthy bottles or foods in a small multi-purpose room. It may hurt you when refrigerator door is

opened and closed resulting in falling stuff down.

Do not allow users to storepharmaceutical products, scientificmaterials, etc., in the refrigerator. The products which temperature

control should not be stored in the refrigerator.

Do not allow users to store articles on theproduct. Opening or closing the door may cause things to

fall down, with may inflict a wound.

Prohibition Prohibition Prohibition

Prohibition

Warning & Caution

Do not allow users to disassemble,repair or alter. It may cause fire or abnormal operation

which leads to injury.

Do notdisassemble

Do not allow users to insert the powerplugs for many products at the same time. May cause abnormal generation of heat or fire.

Prohibition

Do not allow users to bend the powercord with excessive force or do not havethe power cord pressed by heavy article. May cause fire.

Do not allow users to install therefrigerator in the wet place or the placewhich water splashes. Deterioration of insulation of electric

parts may cause electric shock or fire.

The Appliance must be properlygrounded.

If earthing is not done, it will cause breakdown and electric shock.

Earth

2. PRODUCT SPECIFICATIONS

The SAMSUNG bottom mount freezer in 2009 has the following characteristics.

2-1) Introduction of Main Function

7

Surround Multi Flow Uniform cooling for each shelf by a center

positioned fan and duct with multiple floweffluences.

Twin Cooling System The refrigerator and the freezer have two

evaporators. Given this independent system, thefreezer and the refrigerator are cooled individuallyas required and are, therefore, more efficient. Foododor from the refrigerator does not affect food in thefreezer due to separate air flow circulation.

Moving Tray The Deli Drawer can be moved side to side for

customer improved customer satisfaction.

Digital Display & Temperature Control Digital Display & Temperature Control look and feel

neat & clear design.

Easy Handle System(RF197AC,RF217AC) The freezer door is more user-friendly and

convenient.

(Air inlet)(Air inlet)

Heat exchanger

Heat exchanger

Fan

(Air inlet)

Heat exchanger

Fan

(Air inlet)

Compressor

C-Fan ASSY PBADryer

condenser Water Valve

8

2-2) Specifications

PRODUCT SPECIFICATIONS

Defrost Control ···································· From 12 to 64 hrsThermo Bimetal Protector ··········140°F(60)(off) 104°F(40)(on)Defrost Thermistor(502AT) ·········R : 62.6°F(12) F : 57.2°F(14)Electrical Rating ···························AC115V 60Hz 11.6 AmpsMaximum Current Leakage ···································0.5 mAMaximum Ground Path Resistance··························0.1 OhmEnergy Consumption····························453kWh/year(RF21)

445kWh/year(RF19)

Refrigerant Charge ····························(R134a)5.64 oz(160g)Compressor(MK162D-L1U) ·····················730 Btu/hr(0.124kw)Compressor oil ···········································Freol α10cCapillary tube(Dia, Length)······0.032＂＂,157＂＂((00..8822mmmm,,44000000mmmm))

Clearance must be provided for air circulationAT TOP··················································2＂＂((5500mmmm))AT SIDES················································1＂＂((2255mmmm))AT REAR ················································2＂＂((5500mmmm))

Ambient Temperature 70(21) 90(32)Refrigerator, 34(1)∼46(8) 34(1)∼46(8)Freezer, -8(-22)∼8(-13) -8(-22)∼8(-13)Run Time,% 40 65


Heat exchanger

Heat exchanger

Fan

Fan

(Air inlet)


Heat exchanger

ELECTRICAL SPECIFICATIONS

Freezer

Refrigerator

NO LOAD PERFORMANCE

REFRIGERATION SYSTEM

INSTALLATION

9


2-3) Interior Views

Light

Freezer Drawer Bin

Door BinPush it up andslide it out todisassemble.

Vegetable Drawer Fruit Drawers

Glass ShelfPull it out until its stop Tilt down and slide it out.

Moving Tray Pull it out to disassemble.

SAMSUNG

Twin Cooling

Contour

Moving Tray

177.3

179.1

-29.9

-1.6

-21.3

-4.3

0.6

0.8

51.6

41.8

39.7

10

2-4) Model Specification


F-Room

R-Room

F-Room

R-Room

F-Room

R-Room

F-Room

R-Room

N-N

Sound power level

Sound Pressure level

Cooling

Speed(Min)

Product Zone

Appearance

ITEM SPEC

89.6(32°C)

109.4(43°C)

TemperatureDistribution

(Fridge)

Run Time

Per

form

ance

(R

F21

7)N

oise

Cooling Tech

Door Shape

Special Room

220↓

220↓

-26.0↓

2.0↓

-18.0↓

5.0↓

2.0↓

2.0↓

65%↓

46dB↓

45dB↓

RF195/215 RF197/217

COLOR

11

2-5) Model Specification &Specification Chart


Black

Real STS

White

Platinum Inox

Cabinet (Both Side)

All Black

Noble STS

Snow White

Noble STS

Door

Empire Black

Real Stainless

Snow White

Platinum Inox

Molding

I Black

Creamy STS

Snow White

Creamy STS

Compressor

Rated Frequency and Frequency

Refrigerant

Foaming Agent

Refrigerant Input Amount

Type Refrigerator

Motor Rated Consumption Power

Electric Heater Rated Consumption Power

Free Standing Model

Dimension (WxDxH)Inch/mm

Capacity(net)

(cu.ft/l)

Dimension(Net :

Inch/mm)

Height

Depth

Dimension(packing :Inch/mm)

Weight(lb/kg)

Model Number/BOM code

Swing/Auto Ice Maker Swing/Auto Ice Maker Drawer/Auto Ice Maker Drawer/Auto Ice Maker

32¼x30½x69¾(817x774x1772) 32¼x32½x69¾(817x824x1772) 32¼x30½x69¾(817x774x1772) 32¼x32½x69¾(817x824x1772)

RF195 RF215 RF197 RF217

(17.8 / 504.0)

(12.1 / 342.6)

(5.7 / 161.4)

32 ¼ / 817

68 ⅝/ 1743

69 ¾/1772

30 ½ / 774

28 ½/ 715

24 ⅜/ 617

34 ⅝ / 879

75 / 1906

30 ¼ / 766

238lb (108kg)

269lb (122kg)

(19.7/557.8)

(13.3/376.6)

(6.4/181.2)

32 ¼ / 817

68 ⅝ / 1743

69 ¾ / 1772

32 ½ / 824

30 ½ / 765

26¼ / 667

34 ⅝ / 879

75 / 1906

33 ⅛ / 840

231lb(105Kg)

256lb(116Kg)

(17.8 / 504.0)

(12.1 / 342.6)

(5.7 / 161.4)

32 ¼ / 817

68 ⅝/ 1743

69 ¾/1772

30 ½ / 774

28 ½/ 715

24 ⅜/ 617

34 ⅝ / 879

75 / 1906

30 ¼ / 766

238lb (108kg)

269lb (122kg)

(19.7 / 557.8)

(13.3 / 376.6)

(6.4 / 181.2)

32 ¼ / 817

68 ⅝ / 1743

69 ¾ /1772

32 ½ / 824

30 ½ / 765

26 ¼ / 667

34 ⅜ / 879

75 / 1906

33 ⅛ / 840

251lb (114kg)

282lb (128kg)

Total

Refrigerator

Freezer

Width

Width

Height

Depth

Net

Packing

w/o Hinge

With Hinge

with Handle

w/o Handle

w/o Door

3 Door

Reciprocate

AC 115V/60Hz

R 134a

C-Pentane

5.64 oz (160g)

Indirect Cooling Method Refrigerator

130W

350W

Items

Model

12


Compressor

Evaporator

Model

First Defrost Cycle (Concurrent defrost of F and R)

Defrost Cycle(FRE)

Defrost Cycle(REF)

Pause time

THERMISTOR

(F-SENSOR)

502AT

Temperature Selection

-8(-22)

-2(-19)

8(-13)

Model

THERMISTOR

(R-SENSOR)

502AT

F Defrost-Sensor

R Defrost-Sensor

F Bimetal-thermoProtector

R Bimetal-thermoProtector

Temperature Selection

34(1)

38(3)

46(8)

Model

SPEC

Model

SPEC

Rated

Operating temperature

Rated

Operating temperature

Condenser

Dryer

Capillary tube(Dia x Length)

Refrigerant

Model

Starting type

Oil Charge

Freezer

Refrigerator

MK162DL1U-E09

AC

FREOL α-10

SPLIT FIN TYPE

SPLIT FIN TYPE

Forced and Natural Convection Type

Molecular shieve XH-9

0.032” x 157” (0.82mm x 4000mm)

R134a

6hr ±10min

12~34hr(varies according to the conditions used)

6~17hr(varies according to the conditions used)

12 ±1min

THERMISTOR (502AT)

5.0 at 77(25)

THERMISTOR (502AT)

5.0 at 77(25)

AC 125V 6A

Off : 140(60) / On : 104(40)

AC 125V 6A

Off : 140(60) / On : 104(40)

ON()

0(-18)

5(-15)

16(-9)

ON()

41(5)

45(7)

54(12)

OFF()

-15(-26)

9(-23)

1(-17)

OFF()

27(-3)

30(-1)

39(4)

Specification

RF19*,RF21*

Com

pone

nts

for

Fre

ezer

Def

rost

Rel

ated

Com

pone

nts

Fre

ezer

Ref

riger

ator

Def

rost

Cyc

leD

efro

st S

enso

rB

imet

al

Room

Tem

pera

ture

Sen

sor C

ompo

nent

s

13


Items

Model

Defrost Heater(FRE)

Defrost Heater(REF)

Over Load Relay

Rated Voltage

Motor-BLDC(FRE)

Motor-BLDC(REF)

Motor-BLDC(CIRCUIT)

Lamp(FRE)

Lamp(REF)

Heated at F Defrost

Heated at R Defrost

Model

Temp.ON

Temp.OFF

Door SwitchFRE

REF

Power Cord

Ground Screw

Specification

RF19*,RF21*

Ele

ctric

Com

pone

nts

AC 120V, 240W

AC115V, 120W

4TM412SFBYY-53

275 ± 9°F(135±5°C)

141.8 ± 9°F(61±5°C)

AC 115V/ 60Hz

DC12V / DREP5020LC

DC12V / DREP5020LC

DC12V / DRCP5030LA

DC 12V / 100mA~130mA(1EA)

DC 12V / 255mA~320mA(1EA)

DC200V 0.5A / MS-406-SS-01(1EA)

DC200V 0.5A / MS-406-SS-01(2EA)

AC125V 15A

BSBN (BRASS SCREW)

MODEL

RF19*RF21*

A

24 ⅜

26 ¼

B

28 ¼

30 ¼

C

30 ½

32 ½

D

46 ½

48 ½

E

41

43

14


2-6)Dimensions of Refrigerator (Inches)

15

Compressor → Sub-condenser → Side Cluster → Hot Pipe → Dryer → R Capillary→ R Evaporator → F Evaporator → Suction Pipe → Compressor


2-7) Refrigerant Route in Refrigeration cycle

(AXIAL FLOW FAN)

(AXIAL FLOW FAN)

16


2-8) Cooling Air Circulation

17

3. DISASSEMBLY AND REASSEMBLY

• Unplug the refrigerator before cleaning and making repairs.• Do not dissemble or repair the refrigerator by yourself.

- It may cause risk of causing a fire, malfunction and/or personal injury.• Remove any foreign matter or dust from the power plug pins.- Otherwise there is a risk of fire.

• Do not use a cord that shows cracks or abrasion damage along its length or at either end.• Do not plug several appliances into the same multiple power board. The refrigerator should always be

plugged into its own individual electrical which has a voltage rating that matched the rating plate.- This provides the best performance and also prevents overloading house wiring circuits, which couldcause a fire hazard from overheated wires.

• Do not install the refrigerator in a damp place or place where it may come in contact with water.- Deteriorated insulation of electrical parts may cause an electric shock or fire.

• The refrigerator must be grounded.- You must ground the refrigerator to prevent any power leakages or electric shocks caused by currentleakage from the refrigerator.

• Do not put bottles or glass containers in the freezer.- When the contents freeze, the glass may break and cause personal injury.

• Do not store volatile or flammable substances in the refrigerator.- The storage of benzene, thinner, alcohol, ether, LP gas and other such products may causeexplosions.

- Required Tools

3-1) PRECAUTION

IMAGE ITEM USE

Phillips Head Driver Use for inserting andremoving screws

Flat Head DriverUse for assembling and disassemblingof HomeBar, Dispenser, Deli Box, Main

PBA etc..

Hex Wrench Ø2mm Use for Hinge assembly/disassembly

Socket Wrench Ø10mm Use for Door Hingeassembly/disassembly

18

3-2) Refrigerator Door

DISASSEMBLY AND REASSEMBLY

RefrigeratorDoor

Part Name How To Do Descriptive Picture

1. Remove the 3 screws holdingdown the top table and removeit.

2. Disconnect electric wire on thetop of the refrigerator.

3. Remove the 3 hex bolts thathold the hinge on the top of therefrigerator with the 7/16” socketwrench.

4. Remove the screw that holdsthe ground wire with a philipsscrewdriver(+).

5. Separate the Hinge from theelectric wire and ground wire.

Top Table

19


RefrigeratorDoor


6. Lift the door straight up toremove.Be careful not to drop andscratch the doors whileremoving the doors.

7. Separate the cap on the middlehinge.

3-3 ) Freezer Door (RF195/215)

Freezer Door


1. Remove the screw attached tothe left and right middle hingeswith a philops screwdriver(+).Remove the 2 hex head boltsattached to the left and rightmiddle hinges with an allenwrench(3/16”).

20


3-3 ) Freezer Door(RF195/215)


Freezer Door

2. Remove the Middle Hingeconnected to the Freezer.

3. Disassemble the Freezer doorby lifting it upward. Be carefulnot to drop and scratch theFreezer door

4. Disassemble the Cap on theLow Hinge.

3-3 ) Freezer Door (RF217/RF197)

FreezerDoor


1. After opening the Freezerdoor,lift the drawer box.

1. Remove 1 screw at the lowerpart of the Freezer.

2. Separate the Cap.

3. Separate the Housing.

21


3-4) Freezer Door Switch

FreezerDoor Switch


FreezerDoor


2. Remove 4 hex head bolts fromboth sides with a socketwrench(7/16”).

3. Lift up the freezer door from therails.Be careful not to drop andscratch the freezer door.

22


3-6) Glass shelves

Glass shelves


1. When pulling out the shelf, if it isnot slid out well, lift it up slightlyand pull out again.

3-5) Refrigerator Light

Refrigerator Light


1. Remove the lamp cover bypulling it down as pushing therear of lamp cover.

2. Separate the LED panel.

23


3-7) Moving tray

Moving tray


1. When pulling out the Movingtray, if it is not slid out well, lift itup slightly and pull out again.

3-8) Vegetable & Fruit Drawers Shelf

Vegetable & FruitDrawers Shelf


1. Remove the vegetable & fruitdrawer by pulling the roller partand lifting it up.

2. Remove the vegetable & fruitdrawer shelf by pulling it out.(Refer to the picture)

3. Remove the vegetable & fruitdrawer partition by pulling it out.(Refer to the picture)

24


3-9) Gallon Door Bin

Door Bin


1. Simply lift the bin up and pullstraight out.(Refer to the picture)

3-10) Evaporator In Refrigerator

Evaporator InRefrigerator


1. Remove the screw cap with aflat-blade screwdriver.

2. Unscrew a screw.

3. Unscrew two screws. Andremove the hook by pulling itfrom the lower part and pushingthe cover down. (Refer to thepicture)

25


Evaporator InRefrigerator


4. Remove the housing cover bypushing both lateral sides of thehousing cover and pulling it out.(Refer to the picture)

5. Disconnect the housingconnector part. (Refer to thepicture)

6. Remove the evaporator byLifting the bottom side of it upand pulling it out. (Refer to thepicture)

26


3-11) Door Handle Freezer

Door HandleFreezer


Insert the small flat-head driver tothe hole at the bottom of CapHandle and pull the handleassembly out to the front side withturning driver to one side.

CAUTION : Turn the handleassembly though 90degrees to allowaccess to the bottomfixing position.

- Required Tools: Flat Head DriverØ0.12~0.13"(Ø3.0~3.3mm)

3-12) Freezer Light

Freezer Light


1. Remove the light by pulling thelight cover down while pushingthe rear plane of light cover.

27


3-13) Evaporator Cover In Freezer

Evaporator CoverIn Freezer


1. Remove the freezer door andfreezer drawer by pulling out thedrawer and then unscrewing 2screws. Lift up the evaporatorcover.

2. Disengage the housingconnector and remove theevaporator cover.

3-14) Evaporator InFreezer

Evaporator InFreezer


1. Remove the housing cover bypushing both lateral sides ofhousing cover part and pulling itout. Remove the housingconnector part.

2. Remove the evaporator bypulling the lower part of theevaporator while lifting it up.

28


3-15 ) Motor Fan

Motor Fan


1. Unscrew 4 screws of covercompressor.

2. Disengage the housingconnector. (Refer to the picture)

3. Remove the hooker of supportcircuit motor by lifting the hookerup and pulling it out.

4. Remove the screw with a flat-blade screwdriver. (Refer to thepicture)

5. Remove the motor fan by pullingthe fan out while graping themotor part.(Refer to the picture)

29


Motor Fan


6. Unscrew 2 screws fixed in themotor.

7. Remove the hook of the motorcover with a flat-blade (-)screwdriver and then removethe motor.

30

4. TROUBLESHOOTING

4-1) Check items before failure diagnosis

4-1-1. TEST mode (Manual operation / Manual defrost function)

If Power Freeze Key + Fridge Key on the front of panel are pressed simultaneously for 8 seconds, the testmode will be activated and all displays on the front of panel will be off.

If any key on the front panel is pressed within 15 seconds after changing to Test Mode, it will be operate as inthe sequence below ; Manual operation (FF) → Manual defrost of R (rd) → Manual defrost of F/R (Fd) →Cancel (Display all off).

If any key on the front of panel is not pressed within 15 seconds after the Test Mode, the Test Mode will becanceled and it will be returned to previous mode.If the test mode is canceled, power off and reactivate the refrigerator.

① If Power Freeze Key + Fridge Key are pressed simultaneously for 8seconds and all displays are off, the test mode will be activated (manual operation)

by pressing any key

1-1) If any key is pressed once in TEST MODE, "FF" blinks on the display and it indicates therefrigerator has entered manual operation. At this moment, buzzer beeps as an alarm.

1-2) If manual function is selected, compressor will run at once without 5 minutes delay in any mode. Ifthe refrigerator is on the defrost cycle at the moment, defrost will be stopped and manual operationwill begin. (Be careful if manual operation starts at the same time the compressor turns off, as anoverload could occur.)

1-3) If manual operation works, compressor & F-FAN operate continuously for 24 hours and fresh foodcompartment will be controlled by the setting temperature.

1-4) When the manual operation runs, setting temperature will be selected automatically as below ;Freezer compartment -8(-22), Fresh food compartment 34(1).

1-5) During manual operation Power Freeze & Power Cool function will not be worked. If a function isselected, the power function icon of the selected one will be off automatically after 10 seconds.

1-6) Manual operation can be canceled during manual operation by turning on the appliance afterpower off(resest) or choosing the following step 4) test cancel mode.

1-7) When the manual operation runs, alarm (0.25 seconds ON/0.75 seconds OFF) will beepcontinuously until manual operation is completed and there is no function to make the sound stop.

1) Manual operation function

❶ ❷

31

TROUBLESHOOTING

2-1) If any key is pressed one more time during manual operation (Fresh food compartment), "rd"shows in the display and then manual operation will be canceled at once and fresh foodcompartment will be defrosted.

2-2) At this moment, alarm beeps for 3 seconds from the beginning, and then beeps 0.1 sec ON/ 1 secOFF during manual defrost (Fresh food compartment) function.

2) Manual defrost (R : Fresh food compartment) function

3) Manual defrost (R & F : Fresh food & Freezer compartment) function

3-1) If any key is pressed one more time during manual defrost (defrost of fresh food compartment,"rd") "Fd" shows on the display and then fresh food and freezer compartments defrost will operate.Simultaneous manual defrost of Fresh food and Freezer compartment is on the extension of freshfood compartment, and when it begins, it operates by comparing the temperature of FreezerHeater ON, not compare the temperature of fresh food Heater ON separately, That is, in case ofmanual defrost of fresh food, it is the Heater On condition and if the simultaneous manual defrostof fresh food and freezer compartment key before completing deforest, it does not make fresh foodcompartment heater OFF by re-comparing the temperature of fresh food compartment EVA.

3-2) At this time, alarm beeps for 3 seconds from the beginning, and then beeps 0.5 sec. ON/ 0.5sec.OFF during the manual defrost of the fresh food and freezer compartment.

4) Test cancel mode4-1) During the simultaneous defrosting of fresh food and freezer compartments, if any key is pressed

once, all display on the front panel will be off and defrosting of fresh food compartments will becanceled at the same time and will return to normal operation. The test functions will also becanceled by turning the main power OFF and ON.

1) Self-diagnostic function in the initial power ON.1-1) Micom operates a self-diagnostic function to check the temperature sensor condition within 1

second when the refrigerator is initially turned On.1-2) If a bad sensor is detected by the self-diagnostic function, the all applicable display LED will blink

for 0.5-second interval. At this moment, there is no beep sound.(Refer to self-diagnostic CHECK LIST)

1-3) Self-diagnostic button is recognized only when the error is displayed by the bad sensor. TheDisplay does not operate normally, but temperature control will be controlled by the emergencyoperation.

1-4) When the error is detected by self-diagnosis, the error can be canceled automatically if all troubledsensors are corrected or Self-diagnostic function key (Power Freeze + Power Cool) are pressedsimultaneously for 8 seconds. (Return to normal display mode)

4-1-2. Self-diagnostic function

32

TROUBLESHOOTING

❶ ❷

❶ ❷

① If Power Freeze Key + Power Cool Key are pressed simultaneously for 8 seconds,the error mode self-diagnosis will be canceled.

2) Self-diagnostic function during normal operation

2-1) If Power Freeze Key + Power Cool Key are pressed simultaneously for 6 seconds during normaloperation, the temperature setting display will operate for 2 seconds (ALL ON/OFF 0.5 sec each).If Power Freeze Key + Power Cool Key are pressed simultaneously for 8 seconds (including above2 seconds), the self-diagnostic function will be selected.

2-2) At this moment, self-diagnostic function will start with a 'ding-dong’ sound. If there is an error, theerror display will operate for 30 seconds and then return to normal condition whether problem iscorrected or not. (Buzzer sounds 'ding-dong') (Refer to self-diagnosis CHECK LIST).

2-3) Input by button is not acceptable during self-diagnostic function.

33

TROUBLESHOOTING

Self-diagnosis CHECK LIST

NO

1

2

3

4

5

6

7

8

9

10

11

12

Trouble item

Ice Maker Sensor Error

R-Sensor Error

R-DEF-Sensor Error

R-FANError

Ice Maker function Error

R-DEF. - Heater Error

Ambient-Sensor Error

F-Sensor Error

F-DEF-Sensor Error

F-FAN Error

C-FAN Error

F-DEF. - Heater Error

Display LED

R-1-

R-1-

R-1-

R-1-

R-1-

R-1-

F-1-

F-1-

F-1-

F-1-

F-1-

F-1-

Trouble contents

ICE MAKER SENSOR part error.

R SENSOR part error.

R defrost SENSOR part error.

R inner fan motor part error.

ICE MAKER operation error.

R defrost part error.

External SENSOR part error.

F SENSOR part error.

F defrost SENSOR part error.

F inner fan motor part error.

Machine room fan motor part error.

F defrost part error.

F-10 F-1 R-10 R-1

34

TROUBLESHOOTING

Self-diagnostics check list

LED Item

R-1-

R-1-

R-1-

R-1-

R-1-

R-1-

F-1-

F-1-

F-1-

F-1-

F-1-

F-1-

Ice Maker Sensor Error

R-Sensor Error

R-DEF-Sensor Error

R-FAN Error

Ice Maker Error

R-DEF. Error

Ambient-Sensor Error

F-Sensor Error

F-DEF-Sensor Error

F-FAN Error

C-FAN Error

F-DEF. Error

Display error : In case of Separation ofsensor housing part, contact error,disconnection, short circuit.Display error by temperature : when thesensing temperature is more than 149(+65) or less than -58(-50).

Display error : In case of separation ofdefrost heater housing, contact error,disconnection, short circuit, or temperaturefuse error.Display error : If defrost does not finishthough the defrost of fresh foodcompartment is heating continuously formore than 80 minutes.

Display error : In case of separation ofsensor housing parts, contact error,disconnection, short circuit.Display error by temperature : When thesensing temperature is more than 149(+65) or less than -58(-50).

Display error : In case of Feed Back signalline contact error, separation of motor wire,motor itself error during operation ofapplicable fan motor.

Display error : When ice making kit isharvested more than 3times and level error.** Only for the Ice Maker applied model.

When checking the voltage of MAIN PCBCN90 #3 ↔ #4 : Shall be between4.5V~1.0V.

When checking the voltage of MAIN PCBCN30 #3 ↔ #8 : Shall be between4.5V~1.0V.When checking the voltage of MAIN PCBCN30 #4 ↔ #8 : Shall be between4.5V~1.0V.

When checking the voltage of MAIN PCBCN31 #1 ↔ #3 : Shall be between4.5V~1.0V.

When checking the voltage of MAIN PCBCN30 #5 ↔ #8 : Shall be between4.5V~1.0V.When checking the voltage of MAIN PCBCN30 #6 ↔ #8 : Shall be between4.5V~1.0V.

Voltage of MAIN PCB CN76 Pink ↔ Gray :Shall be between 7V~12V.

Voltage of MAIN PCB CN76 Blue ↔ Gray :Shall be between 7V~12V.

Voltage of MAIN PCB CN76 Yellow ↔ Gray : Shall be between 7V~12V.

After replacing ice maker, check theoperation by turning the appliance ON again.

After separating MAIN PCB CN72 wire from PCB, the checked resistance value ofCN70 White ↔ Orange shall be 103/397ohm ± 10%(Resistance value is varied by input power)↔ Model without Ice maker (120ohm ± 10%)Check 0 Ohm for heater short, &æOhm forwire / bimetal Open.

After separating MAIN PCB CN72 wire from PCB, the checked resistance value of CN70 Brown ↔ Orange shall be 66/240 ohm ± 10%.(Resistance value is varied by input power)Check 0 Ohm for heater short, &æOhm forwire / bimetal Open.

Display error : In case of Feed Back signal linecontact error, separation of motor wire, motor itselferror during operation of applicable fan motor.

Display error : In case of Feed Back signal linecontact error, separation of motor wire, motor itselferror during operation of applicable fan motor.

Trouble contents Diagnostic method

Fresh food Compartment

Display error : In case of separation ofdefrost heater housing, contact error,disconnection, short circuit or temperaturefuse error.Display error : If defrost does not finishthough the defrost of freeze compartmentis heating continuously for more than 70minutes.

Freeze Compartment

❶ ❷

① If Power Freeze Key + Power Cool Key are pressed simultaneously for 6 seconds, All ON/OFF will blink in 0.5 intervals for 2 seconds.

② If you press Fridge key after pressing the above keys, the load condition mode will start.

1) If Power Freeze Key + Power Cool Key are pressed simultaneously for 6 seconds during normaloperation, the temperature setting display of the fresh food and freezer compartments will blink ALLON/OFF in 0.5 intervals for 2 seconds.

2) At this moment, if the Fridge Key is pressed after pressing the Power Freeze Key + Power Cool Key andpressing Fridge Key, load condition display mode will be returned with alarm ("Ding-dong").

3) Load condition display mode shows the load that the micom signal is outputting. However, even though itshows that micom signal is outputting, it does not show whether the load is operating or not. Though theload operation is displayed, the load could not operated due to an actual load error or PCB relay erroretc. (This function would be applied at A/S.)

4) Load condition display function will run for for 30 seconds and then return to normal conditions.5) Load condition display is as below.

35

4-1-3. Load condition display function

TROUBLESHOOTING

F-10 F-1 R-10 R-1

36

TROUBLESHOOTING

Load mode Check list

Display LED

R-1-

R-1-

R-1-

R-1-

R-1-

R-1-

R1-

F-1-

F-1-

F-1-

F-1-

R-10-

R-10-

R-10-

Display contents

R-FAN High

R-FAN Low

R-DEF Heater

Start Mode

Overload condition

Low temperature condition

Normal Condition

Exhibition Mode

COMP.

F-FAN High

F-FAN Low

F-DEF Heater

C-FAN High

C-FAN Low

French Heater

Operation contents

When fresh food compartment FAN High operates, applicable LED ON.

When fresh food compartment FAN Low operates, applicable LED ON.

When fresh food compartment defrost heater operates, LED ON.

When initial power applied to refrigerator, LED ON.

When ambient temperature is more than 93(34), LED ON.

When ambient temperature is less than 72(22), LED ON.

When the ambient temperature is between 73(23) ~ 91(33).

F-1-,ALL LED Off

At the display mode, LED ON.

When compressor operates, applicable LED ON.

When freezer FAN High operates, applicable LED ON.

When freezer FAN Low operates, applicable LED ON.

When freezer defrost heater operates, LED ON.

When compressor FAN High operates, applicable LED ON.

When compressor FAN Low operates, applicable LED ON.

When french heater operates, applicable LED ON.

37

4-1-4. Display / Exhibition mode setting function

4-1-5. Option setting function

If Freezer Key + Power Cool Key are pressed simultaneously for 12 seconds during normal operation,fresh food and freezer compartments temperature display will be changed to option setting mode.

TROUBLESHOOTING

1) If Power Freeze Key + Freezer Key are pressed simultaneously for 5 seconds during normal operation,exhibition / display mode will be started with buzzer sound ("Ding-dong").

2) If above Power Freeze Key + Freezer Key are pressed repeatedly, exhibition / display mode will becanceled.

3) If exhibition / display mode is selected, alll function like display, fan motor, etc operate normally, but onlycompressor does not operates.

4) If fresh food and freezer compartments sensors are higher than 149(65) during exhibition / displaymode, exhibition / display mode will be canceled automatically and cooling operation will be returned.(There is no buzzer sound when the exhibition/display mode is canceled by the temperature.)

5) Operation contents of exhibition/display mode-. All function like display, fan motor, etc operate normally, but only compressor does not operates.-. Defrost is not operated. (including french heater)-. Display function of initial actual temperature is finished.-. Exhibition/Display mode will be operated though Power ON after Power OFF under the

exhibition/Display mode condition.

❶ ❶

❶❶

① If Power Freeze Key + Freezer Key are pressed for 5 seconds,exhibition / display mode will be started.

38

1) For example, if you want to change freezer compartment standard temperature to -6 (-3) byoperating option, do as following. This function is for changing the standard temperature. In -2(-19)of current temperature of freezer compartment, if you make the temperature lower to -6(-3) by theoption, the standard temperature would be controlled -8(-22). Therefore, if you changed the settingof temperature option to -2(-19) on the panel, the appliance will be operated with -8(-22). Itmeans that standard temperature is controlled -6(-3) less than setting temperature in the display.

TROUBLESHOOTING

Code Reference Value

Key control in option mode

Power Freeze KeyFreezer Key

Power Cool keyFridge key

Code Down keyCode Up key

Reference Value down keyReference Value Up key

If the display changes to option setting mode, all displays will be off except freezer and fresh foodcompartments temperature display as below. (Fresh food and freezer compartments is explained onlybecause all options are operated with the same method according to the option table.)

Basically, option function has cleared data at shipping process. Therefore, all setting value are"0". But, check the quality information manual or specifications, because setting value could bechanged particularly for the purpose of improving quality at mass producing process.

NOTE

① If Freezer Key + Power Cool Key are pressed simultaneously for 12seconds, option setting mode will be started.

ReferenceValue Up

CodeDown

ReferenceValue Down

ReferenceValue

CodeCode Up

Key control method after changing to option mode.

39

TROUBLESHOOTING

2) After changing to the option mode, fresh food compartment "0", freezer compartment "0" will bedisplayed. (Basically, fresh food compartment "0", freezer "0" would be set at shipping process, butsetting value could be changed for the purpose of improving quality at mass producing process.)- If fresh food compartment "0" shows only, temperature reference value of freezer compartment will be

set and current freezer compartment temperature code will be displayed on the freezer temperaturedisplay.

3) If freezer compartment "4" is set as below freezer compartment code after fresh food compartment "0" isset, standard temperature of freezer compartment will be lower than -6(-3).(Refer to the picture"Changing the freezer compartment temperature")

4) Option changing method as above is the same as all LMF model.5) It is possible to regulate the fresh food compartment temperature, water supplying quantity ejecting

temperature / ejecting time of Ice maker, return temperature agter defrost, hysteresis per temperature,notch gap per temperature, etc.

6) Option function is set in the EEPROM at shipping process in the factory. You would better not to changethe option of your own. Completing the setting is that option function return to normal display after 20seconds. Do not turn off the appliance before returning to the normal display mode.

: If you wait for 20 seconds after completing the setting, MICOM will save the setting value to theEEPROM and normal display will be returned and the option setting mode will be canceled.


Option setting function exists in the other items. We will skip the explanation of the otherfunctions by the option because it is associated with refrigerator control function and is notneeded at SERVICE.(Please do not set the other options except above SERVICE Manual.)

NOTE

40

TROUBLESHOOTING

4-1-5. Option TABLE



1) Temperature changing table of freezer compartment

ex) If you want to change the freezer standardtemperature to -4(-2°C)

Setting ITEM

MODEL

Freezer Temp Shift

NW2 FDRFridge Room 7-SEG

0

Setting value

Temp.compensation

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

0

-1 (-0.5)

-2 (-1.0)

-3 (-1.5)

-4 (-2.0)

-5 (-2.5)

-6 (-3.0)

-7 (-3.5)

+1 (+0.5)

+2 (+1.0)

+3 (+1.5)

+4 (+2.0)

+5 (+2.5)

+6 (+3.0)

+7 (+3.5)

+8 (+4.0)

FreezerCompartment

Code

ReferenceValue

Setting ITEM

MODEL

Fridge Temp Shift

NW2 FDRFridge Room 7-SEG

1

Setting value

Temp.compensation

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

0

-1 (-0.5)

-2 (-1.0)

-3 (-1.5)

-4 (-2.0)

-5 (-2.5)

-6 (-3.0)

-7 (-3.5)

+1 (+0.5)

+2 (+1.0)

+3 (+1.5)

+4 (+2.0)

+5 (+2.5)

+6 (+3.0)

+7 (+3.5)

+8 (+4.0)

FreezerCompartment

Code

ReferenceValue

2) Temperature changing table of fresh food compartment

ex) If you want to change the freezer compartmentstandard temperature to 4(2°C).

41

TROUBLESHOOTING

4-2) Diagnostic method according to the trouble symptom(Flow Chart)

DATA1.Temperature tableResistance value and MICOM port voltage of sensor according to the temperatureSENSOR CHIP : based on PX41C

-50-49-48-47-46-45-44-43-42-41-40-39-38-37-36-35-34-33-32-31-30-29-28-27-26-25-24-23-22-21-20-19-18-17-16-15-14-13-12-11-10-9-8-7-6

-58-56.2-54.4-52.6-50.8-49

-47.2-45.4-43.6-41.8-40

-38.2-36.4-34.6-32.8-31

-29.2-27.4-25.6-23.8-22

-20.2-18.4-16.6-14.8-13

-11.2-9.4-7.6-5.8-4

-2.2-0.41.43.25

6.88.610.412.214

15.817.619.421.2

4.6944.6774.6594.6414.6224.6024.5814.5604.5374.5144.4904.4654.4394.4124.3854.3564.3264.2964.2644.2324.1994.1654.1294.0934.0564.0183.9803.9403.8993.8583.8163.7733.7293.6853.6403.5943.5483.5013.4533.4053.3563.3073.2583.2083.158

15331914479413679812929412224811563110941310356998073929038803783456791427507771246676346422761012579775511252406498484743145146429844093839002371693543333788322303075229350280212676025562244252334522320213452041819537186981790117142

Voltage Resistance

-5-4-3-2-10123456789101112131415161718192021222324252627282930313233343536373839

2324.826.628.430.232

33.835.637.439.241

42.844.646.448.250

51.853.655.457.259

60.862.664.466.268

69.871.673.475.277

78.880.682.484.286

87.889.691.493.295

96.898.6100.4102.2

3.1073.0573.0062.9552.9042.8532.8022.7512.7002.6492.5992.5482.4982.4492.3992.3502.3012.2532.2052.1582.1112.0642.0191.9741.9291.8851.8421.7991.7571.7161.6751.6361.5961.5581.5201.4831.4471.4121.3771.3431.3091.2771.2531.2131.183

164191573115076144521385713290127491223311741112711082310395998695969223886785268200788875907305703267716521628160525832562154195225503948614690452643694218407239333799367035473428334432043098

Voltage Resistance

404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384

104105.8107.6109.4111.2113

114.8116.6118.4120.2122

123.8125.6127.4129.2131

132.8134.6136.4138.2140

141.8143.6145.4147.2149

150.8152.6154.4156.2158

159.8161.6163.4165.2167

168.8170.6172.4174.2176

177.8179.6181.4183.2

1.1531.1241.0951.0681.0401.0140.9880.9630.9380.9140.8910.8680.8460.8240.8030.7830.7620.7430.7240.7060.6880.6700.6530.6360.6200.6040.5890.5740.5600.5460.5320.5190.5060.4930.4810.4690.4570.4460.4350.4240.4140.4040.3940.3840.375

2997289928052714262725432462238423092237216721002036197319131855179917451693164215941547150214581416137513351297126012251190115711251093106310341006978952926902877854832810

Voltage Resistance

42

TROUBLESHOOTING

- The error of sensor will be displayed on the front of display.When the error of sensor is detected at initial power ON, display of abnormal sensor part will blink.

- The appliance will not stop operating when the error of sensor is detected during operation of theappliance. But normal cooling might be not operated if the appliance is operated by the emergencyoperation mode. You would better to check the appliance according to the self-diagnosis of themanual.

4-2-1. If the trouble is detected by self-diagnosis

1) If Ice Maker Sensor has trouble

Bad contact of connector / Insert correctly

Is Main PCBConnector CN90 inserted

correctly?

Is Ice Maker Sensor unit normal?

Is the voltage betweenMain PCB Connector CN90-#4(White) and

REG1, Heat Sink normal?

Is input voltage of IC10 MICOM #51

normal?

Start

NO

YES

YES

YES

YES

Replace the Ice maker kit

NO

Recheck the wire connection part

NO (0.6V > Measurement < 4.6V)

Check the Cold solder joint, hort,solder touch.

NO

No trouble with PCB and temperature sensor.Recheck the bad contact of the connector.

** Measuring point of resistance value according toSensor **

Ice Maker : CN90 #3 → #4 measure the resistance value** 0Ω : Short trouble / ∞Ω : Opentrouble

Sensor MICOM / Connector number

Voltage is measured between 4.6V ~ 0.6V

Voltage of IC10 MICOM #51 is same with the measuringvoltage of CN90-#4(White), REG1, & Heat Sink fromPCB common Ground part.→ Check the measure on the MICOM Pin #51 or Sensor

Marking #6(R903).

Checking method of Ice Maker Sensor resistanceCN90 #3(White ) ↔ #4(White)- Compare with the temperature table aftermeasuring.

DATA1.Temperature table

ERROR Code

Refer to circuit diagram in th e manual

ICE Connector CN90-4(White) and REG1,

Checking method of Ice Maker Sensor voltage - Measure thevoltage of Sensor Check Point #6(IC10 MICOM #51) on PCB orCN90-#4(White) ↔ REG1, Heat Sink.-. Compare with the temperature table after measuring. Below is

the Measuring voltage of CN90-#4(White)↔ REG1, Heat Sink.

Common PCBGround of REG1 Heat-Sink

43

TROUBLESHOOTING

2) If R Sensor has trouble

Bad contact of connector/Insert correctly


correctly?

Is R Sensor unitnormal?

Is the voltage between MainPCB Connector CN30- #3(Red) & REG1,

Heat Sink normal?

Is the input voltage to IC10 MICOM #53

normal?

Start

NO

YES

YES

YES

YES

Replace the temperature sensor

NO



Check the Cold solder joint, short, solder Touch

NO


** Measuring point of resistance value accordingto Sensor **

R : CN30 #3 ↔ #8 Measure the resistance value** ∞Ω : Short trouble / ∞Ω : Open trouble

Sensor MICOM/Connector number


Voltage of IC10 MICOM #53 is same with themeasuring voltage of CN30-#3(Red), REG1, & HeatSink from PCB common Ground part.→ Check the measure on MICOM or Sensor

Marking #1(R301).

DATA1.Temperature Table

ERROR Code

Refer to circuit diagram in the manual

R Connector CN30#6(White) to REG1HEAT-SINK PCB typical Ground

Checking method of R Sensor resistance CN30-#3(White) ↔ #8(Gray)-. Compare with the temperature table after

measuring

Checking method of R Sensor voltage.-. Measure the voltage of Sensor Check Point #1(IC10 MICOM

#53) on PCB or CN30-#3(Red) ↔ REG1, Heat Sink-. Compare with the temperature table after measuring. Below is

measuring voltage of CN30-#3(Red) ↔ REG1, Heat Sink.Common PCBGround of REG1, Heat Sink

44

TROUBLESHOOTING

3) If R DEF Sensor has trouble


Is Main PCB Connector CN30 inserted correctly?

Is R DEF Sensor unit normal?

Is the voltage between Main PCB Connector CN30- #4(Orange) and REG1,

Heat Sink normal?

Is the input voltage of IC10 MICOM # 54

normal?

Start

NO

YES

YES

YES

YES


NO



Check the Cold solder joint, short, solder Touch

NO

No trouble with PCB and temperature sensorRecheck the bad contact of the connector.

** Measuring point of resistance value according toSensor **R-DEF : CN30 #4 ↔ #8 Measure the resistance value ** ∞Ω : Short trouble / ∞Ω : Open trouble

Sensor MICOM/Connector Number


Voltage of IC10 MICOM #54 is same with themeasuring voltage of CN30-#4(Orange), REG1,&Heat Sink from PCB common Ground part.→ Check the measure on MICOM or, Sensor

Marking #2(R303).

DATA1.Temperature Table

ERROR Code


R DEF Connector CN30-#4(Orange) and REG1

Start

YES

YES

YES

Checking method of R DEF Sensor resistanceCN30-#4(Orange) ↔ #8(Gray)-. Compare with temperature table after measuring.

Check method of R DEF Sensor voltage-. Measure the voltage of Sensor Check Point #2(IC10 MICOM

#54) on PCB or CN30-#4(Orange) ↔ REG1, Heat Sink.-. Compare with temperature table after measuring.

Below is the measuring voltage of CN30-"4"(Orange) ↔ REG1, Heat SinkCommon PCBGround of REG1 Heat Sink

45

TROUBLESHOOTING

4) If Ambient Sensor has trouble



correctly?

Is Ambient Sensor unit normal?

Is the voltage between Main PCB Connector CN31-#1(White) and REG1,

Heat Sink normal?

Is the input voltage of IC10 MICOM #59

normal?

Start

NO

YES

YES

YES

YES


NO

Recheck the wiring connection


Check the Cold solder joint, short,solder touch.

NO


** Measuring point of resistance value according toSensor **Ambient : CN31#1 ↔ #3 Measure the resistance value ** Placed in the right top table of upper hinge.** ∞Ω : Short trouble / ∞Ω : Open trouble


Voltage measured between 4.6V ~ 0.6V.

Voltage of IC10 MICOM #59 is same with themeasuring voltage of CN31-#1(White), REG1, &Heat Sink from PCB common Ground part.→ Check the measure on the MICOM or, Sensor

Marking #5(R309).


ERROR Code


Ambient Connector CN31-#1(White) and REG1

Start

YES

YES

YES

Checking method of Ambient Sensor resistanceCN31-#1(White) ↔ #3(White)-. Compare with the temperature table after

measuring.

Checking method of Ambient Sensor voltage-. Measure the voltage of Sensor Check Point #5(IC10 MICOM

#59) on PCB or CN31-"1"(White) ↔ REG1, Heat Sink.-. Compare with the temperature table after measuring.

Below is the measuring voltage of CN31- #"1(White) ↔ REG1, Heat SinkCommon PCBGround of REG1 Heater Sink

46

TROUBLESHOOTING

5) If F Sensor has trouble

BAd contact of connector / Insert correctly

Is Main PCB ConnectorCN30 inserted correctly?

Is F Sensor unit normal?

Is the voltage between Main PCB Connector CN30-#5(Yellow) and REG1,

Heat Sink normal?

Is the input voltage of IC10 MICOM #57 normal?

Start

NO

YES

YES

YES

YES

Replace temperature sensor

NO

Recheck the wiring connection


Check Cold solder joint, Short, solder Touch

NO


** Measuring point of resistance value according toSensor **F : CN30 #5 ↔ #8 Measure the resistance value** ∞Ω : Short trouble / ∞Ω : Open trouble


Voltage is measure between 4.6V ~ 0.6V

Voltage of IC10 MICOM #57 is same with themeasuring voltage of CN31-"5"(Yellow), REG1, &Heat Sink from PCB common Ground part.→ Check the measure on MICOM or, SensorMarking #3(R305).


ERROR Code


F Connector CN30-#5(Yellow) and

Start

YES

YES

YES

Checking method of F Sensor resistanceCN30-#5(Yellow) ↔ #8(Gray)-. Compare with the temperature table after

measuring.

Checking method of F Sensor voltage-. Measure the voltage of Sensor Check Point #3(IC10 MICOM

#57) on PCB or CN30-#5(Yellow) ↔ REG1, Heat Sink.-. Compare with the temperature table after measuring.

Below is the measuring voltage of CN30-"5"(Yellow) ↔ REG1, Heat Sink.common PCBGround of REG1 Heater Sink

47

TROUBLESHOOTING

6) If F DEF Sensor has trouble


Is Main PCB ConnectorCN30 inserted correctly?

Is F DEF Sensor unit normal?

Is the voltage between Main PCB Connector CN30-#6(Pink) and REG1,

Heat Sink normal?

Is the input voltage of IC10 MICOM #58 normal?

Start

NO

YES

YES

YES

YES

Replace temperature sensor

NO

Check the wiring connection.


Check Cold solder joint, Short, Solder Touch

NO


** Measuring point of resistance value accordingto Sensor **F-DEF : CN30 #6 ↔ #8 Measure the resistance value ** ∞Ω : Short trouble / ∞Ω : Open trouble



Voltage of IC10 MICOM #58 is same with themeasuring voltage of CN30-"6"(Pink) and REG1, & Heat Sink from PCB common Ground part.→ Check the measure on MICOM or, Sensor

Marking #4(R307).


ERROR Code


F DEF Connector CN30-#6(Pink) and REG1

Start

YES

YES

YES

Checking method of F DEF Sensor resistanceCN30-#6(Pink) ↔ #8(Gray)-. Compare with the temperature table after

measuring.

Checking method of F DEF Sensor voltage-. Measure the voltage of Sensor Check Point #4(IC10 MICOM

#58) on PCB or CN30-"6"(Pink) ↔ REG1, Heat Sink.-. Compare with the temperature table after measuring.

Below is the measuring voltage of CN30-"6"(Pink) ↔REG1, Heat SinkCommon PCBGround of REG1 Heater Sink

48

TROUBLESHOOTING

-. The refrigerator of this model has BLDC FAN moror. BLDC motor is driven by DC 7~12V.-. On the normal condition of COMP ON, it operates together with F-FAN motor.

If door is opened and closed once at a high ambient temperature, it will be operated after 1 minute delay.Therefore, you are advised not to taken it for an error.

-. If there is a trouble, you should select the self-diagnostic function to check the trouble before power off.

4-2-2. If FAN does not operate (F, R, C - FAN)

Is COMPRESSORON?

Door

F FAN pulse voltageCN76- #2(Pink)

Common PCB GroundREG1 Heater Sink

The voltage is measured around 2~3V withmulti-meter, though the voltage is changedbecause of pulse signal.

Display for checking the self-diagnostic function

R FAN ERROR

FMICOM(#60)

CloseOpen

0V(High)5V(Low)

0V(Low)5V(High)

R MICOM (#52)

Execute manualoperation

FAN works normally

Repair the connectionof Door S/W

Replace or repair Main PCB

1) F-FAN 2) R-FAN 3) C-FAN

Common PCBGround of REG1 Heater Sink

Power ON with 5 minutesdelay after power OFF.(For preventing the overload of compressor)

Expected causes① FAN-MOTOR has failure itself.② Check the bad contact of wiring

connection.③ Check the input of the motor

rotation pulse when fan motoroperates.

The pulse signal generated when motor rotates will be inputted into CN76-#2(F),#3(R),#1(C). These signals will be inputted into MICOM. If signalsare not inputted during motor operating, the fan is turned OFF and ONagain after 10 seconds. But if signals are not still entered, above operationis repeated for 4 times more. If signals are not entered continuously, themotor is restarted after 10 seconds. This function is effective when thenormal operation of motor is locked by foreign matters such as ice.

Checking method of R,F,C FAN Motor The voltage of PCBcommon Ground REG1 Heater Sink andF FAN ; CN76-#5(Red) shall be less than DC 7~12V.R FAN ; CN76-#6(Brown) shall be less than DC 7~12V.C FAN ; CN76-"4"(Orange) shall be less than DC 7~12V.-. Recheck if resistance values are different after measuring.

Is the voltage between Main PCB REG1 Heater Sink and CN76

-#5(Red) around DC7~12V?

Is the voltage between Main PCB REG1 Heater Sink and CN76

-#6(Brown) around DC7~12V?

Is the voltage between Main PCB REG1 Heater Sink and CN76 -

#4(Orange) around DC7~12V?

Is the external temperature above 66.2(19)?

Is the external temperature above66.2 (19 )?

Recheck after 5 minutes(Time could be delayeddepending on thetemperature). If the temperature islower, it may not operate.; about59(below15)

Is the voltage between Main PCB REG1 Heater Sink and CN30-

#1 (Black) around 0V?

Is the voltage between Main PCB REG1 Heater Sink and

CN30-#2 (Brown) around 0V?

Does DC7~12V alternate with below DC2V between Main PCB REG1 Heater

Sink and CN76-#5(Red)?

Does DC7~12V alternate with below DC2V between Main PCB REG1 Heater

Sink and CN76-#5(Red)?

Does DC7~12V alternate with below DC 2V between Main PCB REG1 Heater

Sink and CN76-#4 (Orange)?

When initial power is applied toappliance, the compressor and fansof fridge/freezer/compressor operate.If freezer temperature is sensed 41by momentary power failure, fans willoperate after 5minutes.

Reference

F FAN ERROR

C FAN ERROR

49

TROUBLESHOOTING

4-2-3. If Ice Maker does not operate

1. Water is automatically supplied to the Ice Maker by temperature & time and Ice Maker dispenses cubed orcrushed ice.

2. Power is applied to the one end of wires all the time, so be careful when disassembling and shell refer to itsexploded diagram in any case.

3. Ice Maker operation shall be checked after pressing the Ice Maker Test S/W.(Freezer Ice Maker) it isimpossible to check when the power is disengaged.

Start

No

Yes

Yes

No

Yes

Yes

No

No

Does Ice Maker perform the self-diagnostic function

for sensing its location?

Is the input voltage ofIC10 MICOM #44 normal?

No trouble with PCB and partsRecheck the bad contact of connector

Does Ice Makerrotate when pressing the Ice Maker

Test S/W ?

Is the water supplied after passing the certain period

of time?

MICOM(IC10) Operation Status

Ready

5V

Operation

0V

#46(Test Switch)

MICOM(IC10) Operation Status

Ready

#44 5V 0V 5V 0V 5V

Rotation ReadyHalfRotation

ReturnRotation

ERROR Code

Yes

NoDoes Ice Maker Sensorunit normal?

1) Check / Repair Ice MakerSensor* Refer to the solution "If Ice

Maker Sensor has trouble"

1) Check / Replace Water Valve* Refer to the operation

condition of Water Valve

1) Check the wiring connections.2) Check / Replace Ice Maker

KIT3) Check / Replace Main PCB

Normal

1) Check the wiring connections.2) Check / Replace Ice Maker

KIT

Checking method of Ice Maker VoltageThe voltage between PCB common Ground REG1 Heater Sink and1) Test Switch Operation (press selected) ; CN90-#5(Gray) shell be DC 0V.

Test Switch Ready ; CN90-#5(Gray) shell be less than DC 5V.

Checking Method of Ice Maker Voltage PCB common Ground REG1 Heater Sink and2) IC10 MICOM #44 voltage ; Ready(5V) → Rotation(0V) → Half Rotation(5V) → Return(0V) → Ready(5V)

* MICOM #44 voltage is same as Connector CN90-7(Purple).

1)Test Switch Operation 1)Test Switch Ready

Common PCBGround of REG1 Heater Sink

Are all the defrostheater normal?

Check the bimetal, heater disconn-ection itself, wiring connection, etc

Refer to self-diagnosticfunction in the manual

Replace and repair theapplicable sensor

Manual operation for a certain period of time

Manual defrost of Fridge andFreezer operate simultaneously.

Resistance value of sensor according to temperature

Refer to DATA1.Temperature Table for the

detailed temperature.

** Measuring point of defrost value according to Heater **F-DEF : CN72 #7(Brown) ↔ #3(Orange)

measure the resistance value(66/240 ohm ± 10%)R-DEF : CN72 #5(White) ↔ #3(Orange)

measure the resistance value(103(120)/397ohm ± 10%)** 0Ω : Short trouble / 0Ω: Open(Bimetal, heater) trouble

Checking method of F,R DEF Heater resistance value.F DEF ; CN72-#7(Brown) ↔ #3(Orange)R DEF ; CN72-#5(White) ↔ #3(Orange)-. Check additionally, if resistance values are different after

the measuring.1) F DEF Heater 2) R DEF Heater

** Measuring point of resistance value according to Sensor **F-DEF : CN30 #6 ↔ #8 measure the resistance valueR-DEF : CN30 #4 ↔ #8 measure the resistance value** 0Ω : Short trouble /0Ω : Open trouble

** Measuring Point of resistance value according to Sensor **PCB common Ground REG1 Heater Sink andF-DEF:CN30 #6 (or Sensor Marking #4(R307),R-DEF:CN30 #4 (or Sensor Marking #2(R303), measure the resistance value.** 0V : Short trouble / 5V : Open trouble

86(30)68(20)50(10)32(0)

14(-10)-4(-20)-22(-30)

4.226.058.8713.2920.4232.2352.41

If Power Freeze Key + Fridge Key are pressedsimultaneously for 8 seconds and then select any key, 3rdTest Mode(Manual defrost) will be operated.

Is the temperature of defrost sensor lower than

53.6(12)?

Is defrost sensor byself-diagnostic normal?

Is power applied toeach defrost heaters?

Is connectionterminal of Main PCB

part normal?

Recheck the applicable sensor which is notreturned.

If defrost sensor temperature of fridge & freezer arehigher than 50(10) & 53.6(12) by the heatingof heater, heating will be finished and returns to thecooling operation after making a pause.

Normal

Repair connection terminal

Reference

Check bimetal, heater itselfdisconnection, wiring connection,

etc.

Replace failure Relay or replacePCB Ass'y

Does the systemreturn to cooling operation after heating

for specified time?

50

TROUBLESHOOTING

- If defrost has trouble, select the self-diagnostic function to detect the error of defrost heater before Power off. (Check thefunction with referring to the self-diagnostic function)

4-2-4. If defrost does not operate (F, R DEF Heater)

R DEF ERROR F DEF ERROR

51

TROUBLESHOOTING

4-2-5. If Power is not supplied

CautionAt the power of main PCB, AC input powerand a high voltage over DC170V(325V)areoccurred. Please take care of yourself onrepair and measurement.

Check in SMPS part

- Refer to function and 'reference'parts in the manual whenchecking Main PCB

Connect plug again, & check the plugloosening.

1) Change FUSE AC 250V 2.0A2) Replace PCB ASS'Y

Check the assembly and connection ofwire

1) Check PCB PATTERN and replaceBD1

2) Replace PCB ASS'Y

1) Check REG1 (KA7805)2) Replace PCB ASS'Y

1) Check & repair the assembly of wire2) Replace Panel PCB

1) Check the contact of Lead Wire2) Replace the applicable Relay

(Replace PCB Main)

1) Solder again2) Replace PCB Main

Replace PCB ASS'Y

- Check Main PCB connection- Check the connections betweenupper hinge Cabi-Door

- Check Door Panel PCB connection

Is plug connected in ?Input Voltage115V ± 15%

Is Fuse on the SMPS PCB

normal?

Is 115V applied to both terminals of

SMPS power VAR1 ?

Is DC 170V applied to both terminals of

BD101 +,-?

Is 12V applied toboth terminal of C111?

Is 5V applied to both terminal of

C113?

Does Panel PCB operates

normally?

Is the load such as relay

normal?

Is there any PCB soldering, Short, or

breakage?

Normal (Recheck)

Checking method of voltage SMPS input ;VAR1 both terminals, or CN10 both terminalAC power.


Checking method of DC secondary output voltageREG1 input ; Regulator 7805 input → Samewih C111 both terminals.DC 12.0V ± 0.8V

Checking method of DC secondary output voltageREG1 input ; Regulator 7805 input → Samewith C113 both terminals.DC 5V ± 0.5V

Start

Did 5mins pass after Compressor

Off?

Check after 5 mins

Normal

Check bad contact of connector

Replace / Repair COMP ASS'Y

No

No

Yes

Yes

Yes

NO

NO

Yes

Yes

Yes

Does compressor work with manual

operation?

Is IC10 MICOM #28 hight?

(5V)

Is IC71 #13 about

0.7V?

Is CN72 connector

normal?

Is COMP ASS'Y

normal?

Normal (Recheck)

Refer to test function in the manual

Did buzzer of manual operation sound?(Check certainly after manual operation)

Check Cold solder joint / Replace PCB

1) Change IC71 Driver IC (TD62083AP)2) Replace PCB

Refer to the circuit diagram in the manual

52

TROUBLESHOOTING

4-2-6. If compressor does not operate

Preliminary Inspection

"Check the compressor with selecting the manual operation"1. Compressor does not work, unless 5mins pass after satisfying the temperature.2. Compressor does not work during defrosting.3. Compressor does not work because it sensing low temperature, unless the fridge & freeze sensor is connected.

Checking method of voltagePCB common Ground REG1 Heater Sink and1) IC10 MICOM #28 ; Voltage is high

(5V ±0.5V) when compressor is working.

Checking method of voltagePCB common Ground REG1 Heater Sink and1) IC71 #13 ; Voltage is Low (0.7V) when

compressor is working.Common PCB GroundREG1 Heater Sink

53

TROUBLESHOOTING

4-2-7. If alarm sounds continuously without stop (Related with buzzer sound)


1. The alarm of freezer / fridge will sound(Ding-dong) after 2minutes from initial door open, and it keeps sounding(ding-dong)at 1 minutes intervals when opening afterward.

2. The alarm sounds because MICOM sense as door-open when door is not pressed completely. So refrigerator inner lampwill be OFF after 10minutes from sensing door-open. In this case, the inner lamp will not ON though the door is openedactually.

① If 'ding-dong' sounds continuously.

② If 'beep-beep' sounds continuously.

Start

Start

Replace PBA Main Testpart, Solder Touch, &Main PCB

Is door closed completely?

Is water penetrated into the door

switch?

Is theconnector(CN30) inserted

correctly?

Is Door S/W itself(unit)

normal?

Is manual operation / defrost

selected?

Does buzzer sound when Power On

again?

Recheck Main PCB & Door switch

Is input voltage of Main #60 & #52changed at door-open &

door-close?

Remove the cause after comprehendingthe conditions of interference by doorgasket, food, etc.

Repair the trouble of wire connectionand door switch

Repair the bad inserting of connectorand bad contact.

Cancel the manual operation / defrostfunction.

Replace door switch

Replace door switch

Normal

Door & MICOM State

Door

Close

Open

FMICOM(#60)

RMICOM(#52)

0V(Low)

5V(High)

0V(Low)

5V(High)

Separate the door switch and check if the measuredvalue of unit is changed from 0ΩΩ to œœΩΩaccording toswitch On/OFF.* Fridge Door Switch is magnetic switch. (It can be

operated when door magnet is combined)

③ If buzzer does not sound

If buzzer does not sounds when button is pressed, manual operation is started, or door is opened,separate Main PCB and then check the breakage of buzzer, bad soldering, etc.(It is recommended to replace Main PCB when the failure of parts is occurred after checking.)

Start

Does it sound 'Dingdong' if press a button

on the frontpanel?

Is the breakage or damage of the buzzer

in the Main PCB?

Recheck the button pressing force andmechanical problem

Check if the lead of component isfallen from the vibration plate of

Buzzer or not.

Does it make a sound of 'Door Open'

alarm when opening the door offreezer or fridge more than

2 minutes?

Main PCB is normal & BUZZER isnormal

Check the panel PCB with referring"How to check Panel Display"

Replace Main PCB

54

TROUBLESHOOTING

55

TROUBLESHOOTING

① When lightning of Panel PCB is disabled

4-2-8. If Panel PCB does not work normally

Start

No

Yes

Yes

Yes

Yes

Yes

Yes

No

Is the PANEL PCBnormal?

Is the connector of upper hinge COVER

inserted correctly?

No problem / Recheck

Is the connector of PANEL PCB part

inserted correctly?

Is Main PCB connector(CN50)

inserted correctly?

Reinsert connector and checkthe bad contact.

Reinsert the connector of MainPCB and check the bad contact.

Reinsert connector of PANELPCB and check the bad contact.

Replace PANEL PCB

Replace PCB

Check parts trouble, fallen PCB Pattern, Solderconnection of parts

Yes

NoIs Main PCB 12V normal?(Check the power)

· Check the connecting part of left/right CABIupper hinge according to left/right opening ofdoor.

· Check the connecting part of left/right doorupper hinge according to left/right openingdoor.

① Door Part - Check the connecting wire of upper hinge Panel - Check the disconnection & short between wires.② Freezer upper CABI - Check the wires between Main PCB - Check the disconnection & short between wires.

56

TROUBLESHOOTING

② If Panel PCB Key is not selected

Start

No

No

Yes

Yes

No

No

Are any keys arepressed from 6 of keys?

Replace PANEL PCB

Is Panel PCB connectorinserted correctly?

Is connector of upper hinge cover inserted

correctly?

Yes

NoIs Main PCBconnector(CN50) inserted

correctly?

Reinsert the Main PCBconnector/ Replace

Reinsert the connector andcheck the bad contact.

Reassemble the Panel PCBCover

Reinsert the connector andcheck the bad contact.

57

TROUBLESHOOTING

4-2-9. If refrigerator ROOM Lamp does not light up (F,R - Same condition) - LED

1. When you replace the lamp of freezer/fridge, please power OFF[Explain cold-storage room lamp on the basis of.]

① When lightning of Panel PCB is disabledStart

No

Yes

Yes

No

Yes

No

No

Is the Door switchcontact normal?

Is the output voltage ofIC71 normal?

Normal / Re-check

Is the output voltageof IC10 MICOM #32

Normal?

Is the main PCB connector(CN71)insertion status normal?

Replace PCB/ Repair the IC71

Re-insert the connectorYes

NoDoes the main PCB connector(CN71)Output normal?(11~13V)

Check the connector terminalReplace PCBYes

NoIs the LED Lamp connectedProperly?

Check the connector terminalYes

Yes

NoIs the LED Lamp normal?

Replace LED Lamp

Replace PCB

Replace Door S/W

Door & MICOM State

Door

Close

Open

FMICOM(#60)

RMICOM(#52)

0V(Low)

5V(High)

0V(Low)

5V(High)

MICOM(LAMP) State

Door

Close

Open

FMICOM(#31)

RMICOM(#32)

0V(Low)

5V(High)

0V(Low)

5V(High)

IC71 State

MICOM(#31/ #32)

IC71 output(#15/ #16)

0V(Low)

5V(High)

12V(High)

0V(Low)

Checking method of Door Switch voltage-. PCB common Ground REG1 Heater Sink and

CN30-"2"(Brown) : measure the voltage (R Door Switch)CN30-"1"(Black) : measure the voltage (F Door Switch)=> See the R DOOR Switch at the following picture

CLOSE

OPEN


Output voltage checking method-. PCB common Ground REG1 Heater Sink and

CN71-"5"(Pink) : measure the voltage (F LED Lamp)CN71-"3"(Blue) : measure the voltage (R LED Lamp)=> Picture is R LED Lamp operation below.

CLOSE

OPEN


TROUBLESHOOTING

4-2-10. No water supply to the ice maker.

Start

Yes

No

No

No

Yes

Yes

No

No

Is the confirming sound of valve operation heard after pressing

the Ice Maker Test switch?

Does Main PCB IC71 #14 have about 0.7V

output?

Main PCB normal-- Need to check the other parts① Check the wire between Ice Water Valve ↔ Main

PCB② Ice Water Valve itself has trouble or bad contact

of connector.③ Check the connection hose

Does Main PCB IC10 MICOM #30 have

HIGH(5V) output?

Is Main PCB RELAYRY74 contact normal?

Check Cold solder joint Short/Replace PCB

Check Cold solder joint Short/Replace PCB

Check Cold solder joint Short/ Replace PCB

Normal (Check Ice Water Valveconnecting hose)


1. Water supplies directly to water valve. Please shut off the water supplying prior to repair.2. Power is applied to the one end of wires. Be careful when disassembling not to get an electric shock.3. To check the Ice Water Valve operation, shall press the Ice Maker Test switch and then check the operation.

(Ice Maker in freezer)

Common PCB Ground REG1 Heater Sink

Based on PCB common Ground REG1 Heater Sink2) IC71 #14 voltage

-.When Ice Water valve waiting (About 12V±0.7V)-.When Ice Water valve waiting (About 0.7V±0.5V)

3) Check the voltage of Ice Water Valve operation (AC Voltage)=> For checking Relay RY74 operation.CN72-#9(Red) ↔ CN71-#9(Purple)-.When Ice Water valve waiting (About AC 0V)

-.When Ice Water valve operating (About AC 115V± 20%)

Checking method of voltageBased on PCB common Ground REG1 Heater Sink1) Check the voltage of IC71 #5 (Same voltage as IC10 #30)

-.when Ice Water valve operating (About 5V±0.5V)

59

5 . EXPLODED VIEW& PARTS LIST

5-1) Freezer

2

2-1

2-22-3

14

9-1

9-2

9-3

11-3

11-2

7 3

9

11

64

5

15

15-1

15-415-5

15-6 15-715-8

15-9

15-2

15-3

1012

11-1

1

1-1

1-2

1-8

1-6

1-91-10

1-4

1-3

1-7 1-5

1-41-51-9

1-10

8

8-2

8-1

13

13-1

13-3

13-413-5

13-2

60

EXPLODED VIEW& PARTS LIST

DA97-08338ADA63-04455ADA63-04456ADA63-05359ADA61-04154ADA66-00554ADA66-10104ADA71-20145ADA61-05185ADA63-05184ADA61-05186ADA90-04793ADA61-03189ADA67-01231ADA63-05155ADA96-00480ADA60-90005ADA61-02901ADA61-04462ADA47-00243CDA97-08607ADA63-04955ADA96-00398KDA97-06703ADA61-04464ADA61-04512ADA66-00436ADA61-04507ADA97-06702ADA61-04465ADA61-04513ADA66-00435ADA61-04506ADA97-08340BDA63-05361ADA63-04313ADA66-10104ADA61-06159ADA71-20145ADA61-05425ADA97-06657CDA63-04444ADA62-01942ADA61-04461ADA63-01809ADA31-00124ADA61-03183ADA63-01808ADA31-00146HDA63-01146A

11-11-21-31-41-91-51-101-61-71-82

2-12-22-3345678

8-18-29

9-19-29-31011

11-111-211-31213

13-113-213-313-413-51415

15-115-215-315-415-515-615-715-815-9

NNOO QQUUAANNTTIITTYYCCOODDEE--NNOO RREEMMAARRKKPPAARRTT NNAAMMEE SSPPEECC

Parts List of Freezer (RF217AC)

ASSY TRAY-FRE UPPCOVER-TRAY FRE UPP ACOVER-TRAY FRE UPP BTRAY-FRE UPPFIXER-ROLLER TRAY FRE UPPROLLER-TRAY FRE UPPROLLER-FREFIXER-ROLLERGUIDE-TRAY FRE UPP RCOVER-ICEGUIDE-TRAY FRE UPP LASSY ICE MAKERCASE-ICE CUBESCOOP ICETRAY-CASE ICE CUBEASSY EVAP-FRERIVET-AVEXFIXER-SENSOR EVAPPLATE-DRAIN FRETHERMO BIMETAL-PROTECTORASSY COVER-LAMP FRECOVER-LAMP FREASSY-LAMP LEDASSY RAIL-SLIDE LOW LHANGER-RAIL LOW LRAIL-SLIDE LOW LGEAR-LSUPPORT-RAIL LOW LASSY RAIL-SLIDE LOW RHANGER-RAIL LOW RRAIL-SLIDE LOW RGEAR-RSUPPORT-RAIL LOW RASSY TRAY-DRAWER BOXTRAY-DRAWER BOXGROMMET-TRAY DRAWER BOXROLLER-FREREINF-DRAWER BOXFIXER-ROLLERGUIDE-DRAWER BOXASSY COVER-EVAP FRECOVER-EVAP FREINSULATION-EVAP FREPLATE-INS EVAP FRECOVER MOTOR-BLDCFAN-AX100W4CC-T1CASE-MOTOR FREGROMMET-MOTOR,FRONTMOTOR BLDCGROMMET-MOTOR,REAR

NW2-FDR,21cu.ftNW2-PJT,HIPS,-,-,-,-,-,COOL WHT,-NW2-PJT,GPPS,-,-,-,-,-,-,-NW2-FDR,HIPS,COOL WHITE(SC-02740R),21cu.ftAW-PJT,POM,1.8,NATURAL,-AW-PJT,POM,42.2,-,NATURAL,-,PVC COATINGPOM,-,-,D22,-,-,-,PA,--,-AW2 CD,PA+ABS,COOL WHITE(SC-02740R)AW2-CD,LDPE,NTRAW2 CD,PA+ABS,COOL WHITE(SC-02740R)NW2,AUTO ICE MAKER,-,-,-,-AW-PJT,PP,-,-,-,COOL WHITE,-W2-PJT(05),PP(BJ-703T4),-,-,SC-02740R,-AW2-CD,LDPE,NTRNW2-PJT,-,-,-,-,-,-,115V/240W,-AL,D3.2,L9.83,-,-CORE-PJT,PP,-,NTR,-NW2-PJT,GALVANUME,T0.3,-,516,-,-AW-PJT(R),BT-121-M, PW-5M1NNW2 FDRAW2 CD,PC,-,-,-,-,-,NTR,-NW2 FDR,3chip 4EANW2-PJT,-,-,-,-,21Cu.ftNW2-PJT,SECC1,T1.6,COOL WHT,-,-,-NW2-PJT,STS304,-,-,431,-,21Cu.ftAW-PJT,POM,-,-,-,NTR,-,-,-NW2-PJT,ABS,-,-,-,COOL WHT,21CU ftNW2-PJT,-,-,-,-,21Cu.ftNW2-PJT,SECC1,T1.6,COOL WHT,-,-,-NW2-PJT,STS304,-,-,431,-,21Cu.ftAW-PJT,POM,-,-,-,NTR,-,-,-NW2-PJT,ABS,-,-,-,COOL WHT,21CU ftNW2-FDR,COOL WHITE,21cu.ftNW2-FDR,PP,COOL WHITE(SC-02740R),21cu.ftAW2,SILICON,-,-,-,-,-,WHT,-POM,-,-,D22,-,-,NW2-FDR,PO-SPHC,T2.0,BLACK-,PA,--,-NW2-FDR,TALC PP,W403.9,L256.6,COOL WHITENW2-PJT,-,-,-,-,-,-,-,-NW2-PJT,PP,-,-,-,-,-,COOL WHT,-NW2-PJT,FOAM-PS,-,-,-,-,-,-,-NW2-PJT,GALVALUME,T0.3,-,-,-,-BLDC-NEW,PP,NTR,-,-,-,-,-,BJ-730-,TD-PJT,ABS,-,-AW-PJT,BUBBLE PP,-,-,-,NTR,-BLDC,NBR,BLACK,-,-,-,-,-,H20-,2950,-,DC12V,150mA,-,-,2.1W,-,-,-,-,-,-,-A-TOP,NBR,-,-,-,ID6.5,OD42,BLK,BLDC

RM001RM012RI247

RF011

RI157RF026RI074

RI171RD094RI184RI242


RI237

RF005RF005RI232RF092RF083RI085RF120RO137RI089RO138

11112222111111111111111111111111111221211111111111

61

DA97-08339ADA63-04455ADA63-04456ADA63-05360ADA61-04154ADA66-00554ADA66-10104ADA71-20145ADA61-05185ADA63-05184ADA61-05186ADA90-04793ADA61-03189ADA67-01231ADA63-05155ADA96-00480ADA60-90005ADA61-02901ADA61-04462ADA47-00243CDA97-08607ADA63-04955ADA96-00398KDA97-06720BDA61-04464ADA61-04516ADA66-00436ADA61-04508ADA97-06718BDA61-04465ADA61-04515ADA66-00435ADA61-04509ADA97-08341ADA63-05362ADA63-04313ADA66-10104ADA61-06159ADA71-20145ADA97-06657CDA63-04444ADA62-01942ADA61-04461ADA63-01809ADA31-00124ADA61-03183ADA63-01808ADA31-00146HDA63-01146A

11-11-21-31-41-91-51-101-61-71-82

2-12-22-3345678

8-18-29

9-19-29-31011

11-111-211-31213

13-113-213-313-413-515

15-115-215-315-415-515-615-715-815-9



ASSY TRAY-FRE UPPCOVER-TRAY FRE UPP ACOVER-TRAY FRE UPP BTRAY-FRE UPPFIXER-ROLLER TRAY FRE UPPROLLER-TRAY FRE UPPROLLER-FREFIXER-ROLLERGUIDE-TRAY FRE UPP RCOVER-ICEGUIDE-TRAY FRE UPP LASSY ICE MAKERCASE-ICE CUBESCOOP ICETRAY-CASE ICE CUBEASSY EVAP-FRERIVET-AVEXFIXER-SENSOR EVAPPLATE-DRAIN FRETHERMO BIMETAL-PROTECTORASSY COVER-LAMP FRECOVER-LAMP FREASSY-LAMP LEDASSY RAIL-SLIDE LOW LHANGER-RAIL LOW LRAIL-SLIDE LOW LGEAR-LSUPPORT-RAIL LOW LASSY RAIL-SLIDE LOW RHANGER-RAIL LOW RRAIL-SLIDE LOW RGEAR-RSUPPORT-RAIL LOW RASSY TRAY-DRAWER BOXTRAY-DRAWER BOXGROMMET-TRAY DRAWER BOXROLLER-FREREINF-DRAWER BOXFIXER-ROLLERASSY COVER-EVAP FRECOVER-EVAP FREINSULATION-EVAP FREPLATE-INS EVAP FRECOVER MOTOR-BLDCFAN-AX100W4CC-T1CASE-MOTOR FREGROMMET-MOTOR,FRONTMOTOR BLDCGROMMET-MOTOR,REAR

NW2-FDR,19cu.ftNW2-PJT,HIPS,-,-,-,-,-,COOL WHT,-NW2-PJT,GPPS,-,-,-,-,-,-,-NW2-FDR,HIPS,COOL WHITE(SC-02740R),19cu.ftAW-PJT,POM,1.8,NATURAL,-AW-PJT,POM,42.2,-,NATURAL,-,PVC COATINGPOM,-,-,D22,-,-,-,PA,--,-AW2 CD,PA+ABS,COOL WHITE(SC-02740R)AW2-CD,LDPE,NTRAW2 CD,PA+ABS,COOL WHITE(SC-02740R)NW2,AUTO ICE MAKER,-,-,-,-AW-PJT,PP,-,-,-,COOL WHITE,-W2-PJT(05),PP(BJ-703T4),-,-,SC-02740R,-AW2-CD,LDPE,NTRNW2-PJT,-,-,-,-,-,-,115V/240W,-AL,D3.2,L9.83,-,-CORE-PJT,PP,-,NTR,-NW2-PJT,GALVANUME,T0.3,-,516,-,-AW-PJT(R),BT-121-M, PW-5M1NNW2 FDRAW2 CD,PC,-,-,-,-,-,NTR,-NW2 FDR,3chip 4EANW2-PJT,-,-,-,-,19Cu.ftNW2-PJT,SECC1,T1.6,COOL WHT,-,-,-NW2-PJT,STS304,-,-,-,19Cu.ftAW-PJT,POM,-,-,-,NTR,-,-,-NW2-PJT,ABS,-,-,-,COOL WHT,19CU ftNW2-PJT,-,-,-,-,19Cu.ftNW2-PJT,SECC1,T1.6,COOL WHT,-,-,-NW2-PJT,STS304,-,-,-,19Cu.ftAW-PJT,POM,-,-,-,NTR,-,-,-NW2-PJT,ABS,-,-,-,COOL WHT,19CU ftNW2-FDR,COOL WHITE,19cu.ftNW2-FDR,PP,COOL WHITE(SC-02740R),19cu.ftAW2,SILICON,,-,-,-,-,WHT,-POM,-,-,D22,-,-,NW2-FDR,PO-SPHC,T2.0,BLACK-,PA,--,-NW2-PJT,-,-,-,-,-,-,-,-NW2-PJT,PP,-,-,-,-,-,COOL WHT,-NW2-PJT,FOAM-PS,-,-,-,-,-,-,-NW2-PJT,GALVALUME,T0.3,-,-,-,-BLDC-NEW,PP,NTR,-,-,-,-,-,BJ-730-,TD-PJT,ABS,-,-AW-PJT,BUBBLE PP,-,-,-,NTR,-BLDC,NBR,BLACK,-,-,-,-,-,H20-,2950,-,DC12V,150mA,-,-,2.1W,-,-,-,-,-,-,-A-TOP,NBR,-,-,-,ID6.5,OD42,BLK,BLDC

RM001RM012RI247

RF011

RI157RF026RI074



RI237

RF005RF005RI232RF092RF083RI085RF120RO137RI089RO138

1111222211111111111111111111111111122121111111111

62


5-2) Refrigerator

1

1-1

4-2

4-1

3-1

5

6-1

6-2

5-15-2

3-2

2-1

2-21-2

1-3

1-6 1-6

1-41-5

2

4

3

9

6

7

7-1

7-2

12

9-4

9-39-2

9-5

9-49-5

9-1

9

11

11-511-8

11-2

11-1

11-4

11-7

11-9

11-6

9-4

9-39-2

9-5

9-49-5

9-1

10

10-20

10-18

10-1310-12

10-10

10-7

10-5

10-910-6

10-17

10-15

10-1

10-8

10-11

10-2

10-16

10-21

10-4

10-19

10-3

8

8-2

8-1

63

Parts List of Refrigerator (RF21*AC)



11-11-21-31-41-51-62

2-12-23

3-13-24

4-14-25

5-15-26

6-16-27

7-17-2

88-18-29

9-19-29-39-49-510

10-110-210-310-410-510-610-710-810-910-1010-1110-1210-1310-1410-1510-1610-17

DA97-06686ADA64-02645ADA64-02647ADA61-04511ADA61-04510ADA61-04505ADA63-00202ADA97-06674BDA63-04464BDA63-04465ADA97-06675ADA64-02645ADA64-02647ADA97-00663DDA64-00448BDA67-01807HDA97-07058ADA61-00760BDA61-04875ADA97-00103NDA61-60126EDA63-40006ADA97-00103PDA61-60127EDA63-40006ADA97-08606ADA63-05430ADA96-00398FDA97-06700BDA61-00762ADA63-04445BDA64-00656ADA66-10104ADA71-20145ADA97-06656F6002-0002136002-000215DA31-00124ADA31-00146HDA32-10105XDA61-03181ADA61-03182ADA61-04701ADA61-03599ADA61-20128ADA62-01383ADA62-01423ADA62-01941ADA62-01969ADA63-01146ADA63-01808ADA63-01809A

ASSY SHELF-REF UPPTRIM SHELF-REFGLASS-SHELFSUPPORT-GUIDE RAIL FRONTSUPPORT-GUIDE RAIL REARGUIDE-RAILGROMMET-RAILASSY TRAY-CHILLED ROOMTRAY CHIL ROOMCOVER-TRAY CHIL ROOMASSY SHELF-TRIM REF MIDTRIM SHELF-REFGLASS-SHELFASSY COVER-VEGTRIM-COVER VEGSHELF-GLASSASSY RAIL VEG-MIDRAIL-VEG, MIDSUPPORT-RAIL VEGASSY RAIL-VEG, LRAIL-VEGGROMMETASSY RAIL-VEG, RRAIL-VEGGROMMETASSY COVER-LAMP REFCOVER LAMP-REFASSY-LAMP LEDASSY CASE-VEG REFCASE-VEG,REFCOVER-VEG REFKNOB-HUMIDITYROLLER-FREFIXER-ROLLERASSY COVER-EVAP REFSCREW-TAPPINGSCREW-TAPPINGFAN-AX100W4CC-T1MOTOR BLDCSENSOR TEMPCASE-MOTOR REFGUIDE-INS EVAP REFPLATE-INS EVAP REFPLATE-HOUSING REFSPRING ETC-FANINSULATION-EVAP SUBINSULATION-EVAP DUCTINSULATION-EVAP REFINSULATION-EVAP REARGROMMET-MOTOR,REARGROMMET-MOTOR,FRONTCOVER MOTOR-BLDC

NW2,21cu.ftNW2,HIPS,-,-,-,COOL WHITE,21cu.ftNW2,GLASS,T4.0,-,-,-,-,-NW2,HIPS,-,-,-,COOL WHITE,-NW2,HIPS,-,-,-,COOL WHITE,-NW2,HIPS,-,-,-,COOL WHITE,--,NY-6,-,-,-,-,-,-,-NW2,-,-,-,-,19cu.ftNW2,GPPS,-,-,-,-,-,-NW2,HIPS,-,-,-,-,-,COOL WHITE,-NW2,-NW2,HIPS,-,-,-,COOL WHITE,21cu.ftNW2,GLASS,T4.0,-,-,-,-,-NW2-FDR,TALC PP,W403.9,L256.6,COOL WHITEW2-PJT(55),ABS,-,T2.5,L403,W717,cool whiteW2-PJT(55), GLASS,T5,W708.5,L346,-,COVER-VEGNW2,-,-,-,-,21Cu.ftW2-PJT(55),ABS,T2.5,-,-,COOL-WHITE,SC-02740RNW2,PP(BJ-730),-,-,-,COOL WHITE,-W2-PJT,ABS,L341.5,SC-02740R,cool white,-W2-PJT,ABS,T3.0,-,LEFT,COOL-WHITE,SC-02740RRAIL,NY-6,-,-,-,-,-,-,RAILW2-PJT,ABS,L341.5,SC-02740R,cool white,-W2-PJT,ABS,T3.0,-,RIGHT,COOL-WHITE,SC-02740RRAIL,NY-6,-,-,-,-,-,-,RAILNW2 FDRNW2-FDR,PC,NTRNW2 FDR,3chip 10EANW2-PJT,-,-,-,-,-W2-PJT(55),HIPS,-,-,-,WHITE,HG-1760NW2-PJT,SAN,-,-,-,-,-,NATURAL,-W2-PJT,ABS,-,-,-,-,W9540,-,BEST BYEPOM,-,-,D22,-,-,-,PA,--,-NW2-PJT,-,-,-,-,-,-,-,TWIN COOLINGTH,+,-,1,M4,L12,ZPC(WHT),SWRCH18A,-TH,+,-,1,M4.0,L16,ZPC(WHT),SWRCH18A,--,TD-PJT,ABS,-,-2950,-,DC12V,150mA,-,-,2.1W,-,-,-,-,-,-,-PX-41C,QUEEN PJT,-10,5V,-,-,F-SENSOR,YELLOWAW-PJT,BUBBLE PP,-,-,-,NTR,-AW-PJT,ABS,-,-,-,NTR,-NW2,SAZCC,T3.0,-,-,-,-AW-PJT,GALVALUME,T0.3,-,-,-,--,STS304,PI7.8,-,OD1.0,-,-,-,-,-,FDAW-PJT,FOAM-PS,-,-,-,-,-,-,-AW-PJT,FOAM-PS,T20,W44.5,L45,-,-,-,-NW2-PJT,FOAM-PS,-,-,-,-,-,-,-NW2-PJT,FOAM-PS,-,-,-,-,-,-,-A-TOP,NBR,-,-,-,ID6.5,OD42,BLK,BLDCBLDC,NBR,BLACK,-,-,-,-,-,H20BLDC-NEW,PP,NTR,-,-,-,-,-,BJ-730

RI041RI079RI037

RI088RI018RI018

RI079RI037RI997RI091RF183RI030

RI028RI028RW374RI029RI028RW374

RI999RI999RI010RW508RW648RH029

RS047RS080RI085RI089RQ684RF121RI210

RI307RW716RI232RI236RI231RI233RO138RO137RF083

1111112111111111111111111111211144134111111111211111

64


10-1810-1910-2010-21

1111-111-211-311-411-511-611-711-811-912

DA63-04439ADA63-40167ADA64-02065ADA96-00042ADA96-00461C6501-000123DA32-00006SDA47-00243CDA47-00244BDA59-00357BDA60-90005ADA61-03644ADA61-03683ADA61-04148ADA61-05292A

COVER-EVAP REFGROMMET-COVER CHILTRIM-COVER EVAP REFASSY-HARNESS MOTORASSY EVAP-REFCABLE TIESENSOR TEMPTHERMO BIMETAL-PROTECTORHEATER-METAL SHEATHEVAP REFRIVET-AVEXPLATE-EVAP HEATERFIXER-SENSERPLATE-DRAIN REFGUIDE-FRENCH

NW2-PJT,PP,-,-,-,-,-,COOL WHT,-T3.0,SILICON,-,-,-,-,-,-,NTRAW-PJT,ABS,-,-,-,COOL WHITE,-A-TOP UL(MOTOR),C-FAN,350MMNW2-PJT,PIN,-,-,115V/240W,-,-,-,- DACT-140,-,W3.6,L146,NTR,NYLON66PX-41C, 502AT,AW-PJT,-40~110°…,5V,-,-,R-DEF SENSOR,YEL,400MMAW-PJT(R),BT-121-M, PW-5M1N,125 / 250V,10 / 5A,60°…,40°…,-,-,100MßŸ,-,--,AW-PJT,-,120W,-,115V,110.2Ω,-,-,R-ROOM-,-,-,-,-,-,-,-,AW-PJT,-AL,D3.2,L9.83,-,-AW-PJT,AL,T0.7,-,-,-,-AW-PJT,ABS,-,NTR,-AW-PJT('08),GALVANUME,T0.3,-,-,-,-NW2-FDR,PC-ABS,31.3,95.1,COOL WHITE,SC-02740R

RI024RI087RI241

RO101

RI016

RF170RM017RF026

1111411111111

1



65




11-11-21-31-41-51-62

2-12-23

3-13-24

4-14-25

5-15-26

6-16-27

7-17-28

8-18-29

9-19-29-39-49-510

10-110-210-310-410-510-610-710-810-910-1010-1110-1210-1310-1410-1510-1610-17

DA97-06685CDA64-02644ADA64-02646ADA61-04511ADA61-04510ADA61-04503ADA63-00202ADA97-06677BDA63-04463BDA63-04465ADA97-06687CDA64-02644ADA64-02646ADA97-00663CDA64-00449BDA67-00505LDA97-07059ADA61-00761BDA61-04875ADA97-00103NDA61-60126EDA63-40006ADA97-00103PDA61-60127EDA63-40006ADA97-08606ADA63-05430ADA96-00398FDA97-06725BDA61-00759BDA63-04445BDA64-00656ADA66-10104ADA71-20145ADA97-06656F6002-0002136002-000215DA31-00124ADA31-00146HDA32-10105XDA61-03181ADA61-03182ADA61-04701BDA61-03599ADA61-20128ADA62-01383ADA62-01423ADA62-01941ADA62-01969ADA63-01146ADA63-01808ADA63-01809A

ASSY SHELF-REF UPPTRIM SHELF-REFGLASS-SHELFSUPPORT-GUIDE RAIL FRONTSUPPORT-GUIDE RAIL REARGUIDE-RAILGROMMET-RAILASSY TRAY-CHILLED ROOMTRAY CHIL ROOMCOVER-TRAY CHIL ROOM ASSY SHELF-REF MIDTRIM SHELF-REF GLASS-SHELFASSY COVER-VEG TRIM-COVER VEG(50)SHELF GLASS ASSY RAIL VEG-MID RAIL-VEG, MID SUPPORT-RAIL VEG ASSY RAIL-VEG, LRAIL-VEG GROMMET ASSY RAIL-VEG, RRAIL-VEG GROMMET ASSY COVER-LAMP REFCOVER LAMP-REFASSY-LAMP LEDASSY CASE VEGCASE-VEG,REFCOVER-VEG REFKNOB-HUMIDITYROLLER-FREFIXER-ROLLERASSY COVER-EVAP REFSCREW-TAPPINGSCREW-TAPPINGFAN-AX100W4CC-T1MOTOR BLDCSENSOR TEMPCASE-MOTOR REFGUIDE-INS EVAP REFPLATE-INS EVAP REFPLATE-HOUSING REFSPRING ETC-FANINSULATION-EVAP SUBINSULATION-EVAP DUCTINSULATION-EVAP REFINSULATION-EVAP REARGROMMET-MOTOR,REARGROMMET-MOTOR,FRONTCOVER MOTOR-BLDC

NW2-FDR,19cu.ft NW2,HIPS,-,-,-,COOL WHITE,19cu.ft NW2,GLASS,-,-,-,-,-,19cu.ft NW2,HIPS,-,-,-,COOL WHITE,- NW2,HIPS,-,-,-,COOL WHITE,- NW2,HIPS,-,-,-,COOLWHITE,19cu.ft -,NY-6,-,-,-,-,-,-,-NW2,-,-,-,-,19cu.ft NW2,GPPS,-,-,-,-,-,19cu.ft NW2,HIPS,-,-,-,-,-,COOL WHITE,-NW2-FDR,19cu.ft NW2,HIPS,-,-,-,COOL WHITE,19cu.ft NW2,GLASS,-,-,-,-,-,19cu.ft W2-PJT,ABS+SHELF,GLASS(T5.0),SC-02740R,cool white,-,-,-,- W2-PJT,ABS,-,T2.5,SC-02740R,cool white,- W2-PJT(50),GLASS,T5,W710,L296,-,COVER-VEG NW2,-,-,-,-,19Cu.ft W2-PJT,ABS,T2.5,-,-,COOL-WHITE,SC-02740R NW2,PP(BJ-730),-,-,-,COOL WHITE,- W2-PJT,ABS,L341.5,SC-02740R,cool white,- W2-PJT,ABS,T3.0,-,LEFT,COOL-WHITE,SC-02740R RAIL,NY-6,-,-,-,-,-,-,RAIL W2-PJT,ABS,L341.5,SC-02740R,cool white,-W2-PJT,ABS,T3.0,-,RIGHT,COOL-WHITE,SC-02740R RAIL,NY-6,-,-,-,-,-,-,RAIL NW2 FDRNW2-FDR,PC,NTRNW2 FDR,3chip 10EANW2,-,-,-,-,- W2-PJT,HIPS,-,SC-02740R,-,COOL-WHITE,-NW2-PJT,SAN,-,-,-,-,-,NATURAL,- W2-PJT,ABS,-,-,-,-,W9540,-,BEST BYE POM,-,-,D22,-,-,-,PA,--,-NW2-PJT,-,-,-,-,-,-,-,TWIN COOLINGTH,+,-,1,M4,L12,ZPC(WHT),SWRCH18A,-TH,+,-,1,M4.0,L16,ZPC(WHT),SWRCH18A,--,TD-PJT,ABS,-,-2950,-,DC12V,150mA,-,-,2.1W,-,-,-,-,-,-,-PX-41C,QUEEN PJT,-10,5V,-,-,F-SENSOR,YELLOWAW-PJT,BUBBLE PP,-,-,-,NTR,-AW-PJT,ABS,-,-,-,NTR,-NW2,SAZCC,T3.0,-,-,-,-AW-PJT,GALVALUME,T0.3,-,-,-,--,STS304,PI7.8,-,OD1.0,-,-,-,-,-,FDAW-PJT,FOAM-PS,-,-,-,-,-,-,-AW-PJT,FOAM-PS,T20,W44.5,L45,-,-,-,-NW2-PJT,FOAM-PS,-,-,-,-,-,-,-NW2-PJT,FOAM-PS,-,-,-,-,-,-,-A-TOP,NBR,-,-,-,ID6.5,OD42,BLK,BLDCBLDC,NBR,BLACK,-,-,-,-,-,H20BLDC-NEW,PP,NTR,-,-,-,-,-,BJ-730

1111112111111111111111111111211144134111111111211111

66




10-1810-1910-2010-21

1111-111-211-311-411-511-611-711-811-912

DA63-04439ADA63-40167ADA64-02065ADA96-00042ADA96-00461H6501-000123DA32-00006SDA47-00301DDA47-00244FDA59-00357BDA60-90005ADA61-03644ADA61-05834ADA61-04148ADA61-05292A

COVER-EVAP REFGROMMET-COVER CHILTRIM-COVER EVAP REFASSY-HARNESS MOTORASSY EVAP-REFCABLE TIESENSOR TEMP-R-DEFTHERMO FUSE-ASSYHEATER-METAL SHEATHEVAP REFRIVET-AVEXPLATE-EVAP HEATERFIXER-FUSE REFPLATE-DRAIN REFGUIDE-FRENCH

NW2-PJT,PP,-,-,-,-,-,COOL WHT,-T3.0,SILICON,-,-,-,-,-,-,NTRAW-PJT,ABS,-,-,-,COOL WHITE,-A-TOP UL(MOTOR),C-FAN,350MMNW2-PJT,PIN,220V,120W,R600aDACT-140,-,3.6,146,WHT(NTR),NYLONPX-41C, 502AT,AW-PJT,-40~110°…,5V,-,-,R-DEF SENSOR,YEL,400MMARAM,120V/250V,15A/10A,109~110°…,150mm-,AW-PJT,-,120W,-,230V,440.8 ohm,-,-,R-ROOM-,-,-,-,-,-,-,-,AW-PJT,-AL,D3.2,L10.6AW-PJT,AL,T0.7,-,-,-,-AW3-PJT,PP,NTRAW-PJT('08),GALVANUME,T0.3,-,-,-,- NW2-FDR,PC-ABS,31.3,95.1,COOL WHITE,SC-02740R

111112111111111

67


5-3) Cabinet

7

11

14-1

14

14-4

13

14-4-5

14-4-714-4-3

14-5

14-4-2

14-215

15-315-1

15-115-415-2

14-4-114-4-4

8

12

10

9

1

1-41-2

1-31-6

1-5

2-1

4

54-2

4-4

4-14-3 5-2

5-45-1

5-3

2

32-2

3-13-2

1-7 1-8

16

17

6

6

19

19

17-2

17-1

16-2

16-1

1718

17-2

17-1

1-1

14-3

68

EXPLODED VIEW& PARTS LIST Parts List of Cabinet (RF217AC, RF197AC)


111

1-11-21-31-41-41-41-51-61-71-71-71-82

2-12-23

3-13-24

4-14-24-34-45

5-15-25-35-467891011121314

14-114-214-314-4

14-4-114-4-214-4-314-4-414-4-514-4-614-5

DA97-07654ADA97-07654BDA97-07654CDA34-00043C DA41-00635A DA61-05316A DA64-02960ADA64-02960BDA64-02960CDA61-04052A DA64-02071A DA64-02981ADA64-02981BDA64-02981CDA96-00571A DA97-06715C DA61-04475B DA63-02527C DA97-06716D DA61-04476B DA63-02527C DA97-07514C DA61-04916D DA66-00444A 6011-001442 DA63-04694D DA97-07515C DA61-04917D DA66-00444A 6011-001442 DA63-04694D DA63-02905A DA97-07835A

MK162DL1U/E09DA63-02017ADA60-20008ADA63-00783ADA97-04049ADA62-01514ADA97-07655ADA62-00954ADA63-04466ADA97-07653ADA97-03145LDA31-00146BDA61-02349BDA61-02355BDA63-01146ADA63-40167ADA96-00042ADA31-00010D

ASSY-TOP TABLE ASSY-TOP TABLEASSY-TOP TABLESWITCH REED-ASS'Y PBA PANEL CASE-PBA DISPLAY TOP TABLE TOP TABLETOP TABLEPLATE-TOP TABLE BUTTON-CONTROL INLAY-DISPLAY INLAY-DISPLAYINLAY-DISPLAYASSY W/HARNESS-TOP TABLEASSY HINGE UPP-L HINGE-UPP L SHIM HINGE-UPP ASSY HINGE UPP-R HINGE-UPP R SHIM HINGE-UPP ASSY HINGE MID-L HINGE-MID L SHAFT HINGE-MID R BOLT-SOCKET SHIM HINGE-MID ASSY HINGE MID-R HINGE-MID R SHAFT HINGE-MID R BOLT-SOCKET SHIM HINGE-MID GROMMET HINGE-MID,R ASSY COVER COMP COMPRESSORGROMMET COMPBOLT-HEXCOVER PCB PANELASSY CAP-DRAINDRYERASSY TRAY-DRAIN WATERSEAL-SUB CONDTRAY DRAIN-WATERASSY PIPE-CONDENSERASSY SUPPORT-CIRCUIT MOTORMOTOR BLDCSUPPORT-CIRCUIT MOTORBRACKET-CIRCUIT MOTORGROMMET-MOTOR,REARGROMMET-COVER CHILASSY-HARNESS MOTORFAN-ASS'Y

NW2-FDR,I BLACK(SC-00477R),BLUE LED(Fahrenheit)NW2-FDR,SNOW WHITE(SC-97527R),BLUE LED(Fahrenheit)NW2-FDR,CREAMY STS(SC-07009R),BLUE LED(Fahrenheit)200VDC,1.5A,-NW2 FDR-PJT,DOOR REF,FR-4,300*19.5*1.6T,BLUE LED,12V, 5V,-,N,-,-,- NW2-FDR,HIPS,L303.2,NTR NW2-FDR,ABS,I-BLACK (SC-00477R),T2.0,L811NW2-FDR,ABS,SNOW WHITE(SC-97527TP),T2.0,L812.0NW2-FDR,ABS,CREAMY STS(SC-07009R),T2.0,L812.0AW-PJT,SBHG1,T0.3,67.8,115,-,AW-BASICAW-PJT,GPPS,-,-,NTR,-NW2-FDR,PC,T0.25,I BLACK(SC-00477R),FahrenheitNW2-FDR,PC,T0.25,SNOW WHITE(SC-97527R),Fahrenheit NW2-FDR,PC,T0.25,CREAMY STS(SC-07009R),FahrenheitNW2-PJT,FDRNW2,T3.0,-,-,BLACK,-,- NW2-PJT,SHP1,T3.0,-,-,-,-,-NW2-PJT(05),HIPS,T1.0,-,-,-,-NW2,T3.0,-,-,BLACK,-,-NW2-PJT,SHP1,T3.0,-,-,BLACK,-,- NW2-PJT(05),HIPS,T1.0,-,-,-,-AW2 CD-PJT,T4.5,-,-,Ni-Cr Plated,-,- AW2,SHP1,T4.5,Ni-Cr+Cu Plating,Heat Treatment,SNC2NEXT-PJT,AW,SM10C,-,OD11.2,-,-,- M8,L13.4,ZPC(BLK),SCM435,- AW2,RD-PVC,T1.0,-,-,NTR,- AW2 CD-PJT,T4.5,-,-,Ni-Cr Plated,-,- AW2,SHP1,T4.5,Ni-Cr+Cu Plating,Heat Treatment,SNC2NEXT-PJT,AW,SM10C,-,OD11.2,-,-,- M8,L13.4,ZPC(BLK),SCM435,- AW2,RD-PVC,T1.0,-,-,NTR,-NEXT,POM,T2.0,-,-,-,-,WHITE,- NW2-FDR,T0.4,W263.6,L716.06.15CC,115/127V~60HZ,RSCRQUEEN,EPDM,-,-,-,-,-,BLACK,-S25C,M6,-,-,L42.6,WHITE,-,ZPCA-TOP,N-ABS,-,-,-,-,-,- EPEL,ASSY,-,-,L224.5,-,SOFT-PVCC1220T,OD18.70,L114,-,-,-NW2-FDR,PP SCRAP,SPIRAL COND. W2-05,FOAM-PE,-,T7,-,-,-NW2,PP,-,-,-,-,NTR,-NW2-FDRAW2-PJT,-,-,-,-,1550RPM,2.7WDRCP5030LA,1560,-,DC12V,230mA,-,-,2.7W,ATOPNEXT,ABS,-,-,-,NTR,-ABS,NEXT,-,-,-,NTR,-A-TOP,NBR,-,-,-,ID6.5,OD42,BLK,BLDCSILICON,T3.0,-,L16,-,-,BLACK,-A-TOP UL(MOTOR),C-FAN,350MMET,ZIPEL,ASSY,-,UNIT,_150

111211111111111111111111111111114114121111111111111

69

EXPLODED VIEW& PARTS LIST Parts List of Cabinet (RF217AC)


1515-115-215-315-4161616

16-116-116-116-216-216-217

17-117-217-31819

DA97-06815BDA66-00649ADA61-04703ADA64-02694ADA71-50240ADA97-07836BDA97-07839CDA97-07836ADA63-05106BDA63-05106CDA63-05106ADA67-02071BDA67-02071CDA67-02071ADA97-06688B DA61-04977A DA61-04490A DA71-50240B DA61-04702A DA61-01920A

ASSY CHASSIS COMPSHAFT-CASTERCASTER-REARCHASSIS COMPBRACKET-CABIASSY COVER LEG FRONTASSY COVER LEG FRONTASSY COVER LEG FRONTCOVER LEG-FRONT COVER LEG-FRONT COVER LEG-FRONT CAP LEG FRONTCAP LEG FRONTCAP LEG FRONTASSY SUPPORT-FOOT FRONTFOOT-FRONT SUPPORT-FOOT FRONT BRACKET-CABI CASTER-FRONT CASTER-RIVET

NW2/FDR,CASTER(TPE)AW-PJT,MSWR10,L46,OD8.2,-,-,ZPC2 / 2AW-PJT,PP,-,35,NTR,35,PP+TPE / 2NW2,SBHG1,T1.2,-,-,-,-ALL,SBHG1,T1.6,-,-,-,-NW2-FDR,I-BLACK,DRAWERNW2-FDR,SNOW WHITE,DRAWERNW2-FDR,CREAMY-STS,DRAWERNW2,PP,I-BLACK(SC-00477R),NEW09NW2,PP,SNOW WHITE(SC-97527R),NEW09NW2,PP,CREAMY STSNW2,PP,-,-,-,I-BLACK,SC-00477RNW2,PP,-,-,-,SNOW WHITE,SC-97527RNW2,PP,-,-,-,CREAMY STS,-NW2-FDR,FOOT FRONT(DA61-04977A) / 2 AW2-PJT,PP+MSWR10,-,BLACK,-,-,- / 2NW2,SHP1,T4.0,-,-,-,- / 2T3-PJT,SBHG1,T1.6,-,-,-,- AW-PJT,PP,-,35,NTR,35,PP+TPE (ZPC2),MSWR10,OD8.0,L54,-,-,-

122111111

222211

22

70


5-4) Disassembly of Freezer Door

2

1-10 1-11

1-14

1-16

1-6

1-81-9

1-1-2

1-1-1

1-1

1

1-2

1-5

1-3

1-1-4

2-72-5

2-6

2-32-1

2-8

1-12

1-7

4

1-13

1-1-3

1-15

2-22-8

2-4

71

EXPLODED VIEW& PARTS LIST Parts List of Freezer Door (RF217AC, RF197AC)


1111

1-11-11-11-1

1-1-11-1-11-1-11-1-21-1-21-1-21-1-31-1-41-21-21-31-41-51-61-61-61-71-71-71-81-91-101-111-111-111-121-121-121-131-141-141-141-151-16

222

2-12-22-32-42-52-5

DA90-05229ADA90-05229BDA90-05229CDA90-05229DDA91-02887ADA91-02887BDA91-02887CDA91-02887DDA67-02332ADA67-02332BDA67-02332CDA67-02331ADA67-02331BDA67-02331C6002-001122DA61-03769ADA97-07722ADA97-07722BDA61-03153BDA61-03155B6002-000613DA63-05034ADA63-05034BDA63-05034CDA63-05033ADA63-05033BDA63-05033C6002-000215DA61-04471ADA61-05327ADA67-02638CDA67-02638BDA67-02638ADA67-02344ADA67-02344BDA67-02344CDA61-05215ADA61-04474BDA61-04474CDA61-04474ADA66-00682ADA61-04335BDA97-08879ADA97-08879BDA97-08879C6002-001364DA01-00622ADA61-06253ADA61-06254ADA64-03342ADA64-03342B

ASSY DOOR FREASSY DOOR FREASSY DOOR FREASSY DOOR FREASSY DOOR FOAM FREASSY DOOR FOAM FREASSY DOOR FOAM FREASSY DOOR FOAM FRECAP DOOR FRE SUB LCAP DOOR FRE SUB LCAP DOOR FRE SUB LCAP DOOR FRE SUB RCAP DOOR FRE SUB RCAP DOOR FRE SUB RSCREW TAPPINGMAGNETASSY-GASKET DOOR FREASSY-GASKET DOOR FREHANGER-RAIL FRONT LHANGER-RAIL FRONT RSCREW-TAPPINGCOVER-HANDLE FRE LCOVER-HANDLE FRE LCOVER-HANDLE FRE LCOVER-HANDLE FRE RCOVER-HANDLE FRE RCOVER-HANDLE FRE RSCREW-TAPPINGFIXER SHAFT-HANDLEFIXER HANDLECAP HANDLE FRE SUB LCAP HANDLE FRE SUB LCAP HANDLE FRE SUB LCAP HANDLE FRE SUB RCAP HANDLE FRE SUB RCAP HANDLE FRE SUB RREINF CAP HANDLE FRESLIDER-HANDLE FRESLIDER-HANDLE FRESLIDER-HANDLE FRESHAFT-CAP HANDLESPRING ETC-EASY HANDLEASSY HANDLE-BAR REFASSY HANDLE-BAR REFASSY HANDLE-BAR REFSCREW-TAPPINGFILM-HANDLESUPPORT-HANDLE REF UPPSUPPORT-HANDLE REF LOWHANDLE-BAR REFHANDLE-BAR REF

SECC1,EMPIRE-BLACK,AL BAR,DRAWER,CLEAR COATING-PCM,CLEAR COATING-PCM,FDRSECC1,SNOW-WHITE,AL BAR,DRAWER,POWDER COATING-PCM,POWDER COATING-PCM,FDRSECC1,PLATINUM-INOX,AL BAR,DRAWER,VCM,VCM,FDRSTS201(DY01CU),REAL-STS,AL BAR,DRAWER,NO.4,Un-coating,NO.4,Un-coating,FDRNW2-FDR,EMPIRE BLACK,PCM,DRAWER-TYPENW2-FDR,SNOW-WHITE,PCM,DRAWER-TYPENW2-FDR,PLATINUM-INOX,VCM,DRAWER-TYPENW2-FDR,REAL-STS,STS201(DY01CU),DRAWER-TYPENW2-FDR,ABS,i-BLACK,EASY-HANDLENW2-FDR,ABS,SNOW WHITE,EASY-HANDLENW2-FDR,ABS,CREAMY-STS,EASY-HANDLENW2-FDR,ABS,i-BLACK,EASY-HANDLENW2-FDR,ABS,SNOW WHITE,EASY-HANDLENW2-FDR,ABS,CREAMY-STS,EASY-HANDLEFH,+,1,M4,L14,ZPC(WHT),SWRCH18AHERMES,-,5x7x18,-,-,1200GaussNW2-FDR,BLACK,-,-NW2-FDR,GRAY,-,-AW-PJT,SECC1,T2.0,COOL-WHITE,-,-,RESTRIKINGAW-PJT,SECC1,T2.0,COOL-WHITE,-,-,RESTRIKINGTH,+,-,2,M5,L16,ZPC(WHT),SWRCH18A,-NW2-FDR,ABS,i-BLACK,EASY-HANDLENW2-FDR,ABS,SNOW WHITE,EASY-HANDLENW2-FDR,ABS,CREAMY-STS,EASY-HANDLENW2-FDR,ABS,i-BLACK,EASY-HANDLENW2-FDR,ABS,SNOW WHITE,EASY-HANDLENW2-FDR,ABS,CREAMY-STS,EASY-HANDLETH,+,-,1,M4.0,L16,ZPC(WHT),SWRCH18A,-NW2,POM,-,NTR,-NW2-FDR,SWCH10ANW2 FDR,ABS+PC,MATURE BLACK(SC-03106T) NW2 FDR,ABS+PC,SNOW WHITE(SC-97527T)NW2,ABS+PC,CREAMY STS(SC-07009R)NW2-FDR,PC-ABS,-,100,I-BLACK(SC-00477R),-NW2-FDR,PC-ABS,T3.5,-,100.0,SNOW WHITE (SC-97527R),-NW2-FDR,PC-ABS,T3.5,-,100.0,CREAMY STS (SC-07009R),-AW2-PJT,SGHC,T1.6,-,53,-,-NW2,POM,-,-,-,I-BLACK,-NW2,POM,-,-,-,SNOW WHITE,-NW2,POM,-,-,-,CREAMY-STS,-NW2-FDR,MSWR10,L105,OD5.008 AW1,2-PJT,HSWR,1.0,8,10,-,9,-,-,-,-NW2-FDR,MATURE BLACKNW2-FDR,SNOW WHITENW2-FDR,REAL STAINLESS,HAIR LINE #4FH,+,-,1,M4,L14,CR PLT,SWRCH18A,-NW2 FDR,PET,T0.125,TWO SIDE TAPENW2_FDR,POM,NTR,GF 10%NW2_FDR,POM,NTR,GF 10%NW2-FDR,AL,MATURE BLACKNW2-FDR,AL,SNOW WHITE

11111111111111411111811111122211111122222222221111

72

EXPLODED VIEW& PARTS LIST Parts List of Freezer Door (RF217AC, RF197AC)


2-52-62-62-6

DA64-03342CDA67-02673ADA67-02673BDA67-02673C

HANDLE-BAR REFCAP-HANDLE REFCAP-HANDLE REFCAP-HANDLE REF

NW2-FDR,AL,REAL STAINLESS,HAIR LINE #4NW2_FDR,ABS,NTR,NI-CR PlatingNW2_FDR,ABS,I-BLACKNW2_FDR,ABS,SNOW WHITE

1222

73


5-5) Disassembly of Refrigerator Door Left

1

3

9

11

10

1-1

4-3

4

8

7

4-54-7

4-15

4-6

4-10

4-16

4-12

4-11

4-9

4-8

4-4

4-24-1

1-71-6

1-31-5

1-2 1-4

5

6

2-3

2-6

2-1

2-5

2-4

2

74

EXPLODED VIEW& PARTS LIST Parts List of Refrigerator Door-Left (RF21*AC,RF19*AC)


1111

1-11-21-31-41-51-51-51-61-7222

2-12-22-32-42-52-52-52-62-62-633444

4-14-24-34-34-34-44-54-64-74-74-74-84-84-84-94-104-114-124-134-14

DA91-02889ADA91-02889BDA91-02889CDA91-02889DDA61-03769A6001-0013776002-0011206009-001475DA61-02383ADA61-02383CDA61-02383EDA61-03211ADA63-40294ADA97-08879ADA97-08879BDA97-08879C6002-001364DA01-00622ADA61-06253ADA61-06254ADA64-03342ADA64-03342BDA64-03342CDA67-02673ADA67-02673BDA67-02673CDA97-07668ADA97-07668BDA97-07661ADA97-07661BDA97-07661CDA61-05315ADA47-00245EDA61-05291ADA61-05291BDA61-05291CDA62-02212ADA62-02294ADA63-03454BDA63-03508ADA63-03508CDA63-03508BDA63-05158ADA63-05158CDA63-05158BDA67-01650ADA67-01701ADA81-01345ADA81-01346ADA67-02306A6002-000630

ASSY DOOR FOAM REF LASSY DOOR FOAM REF LASSY DOOR FOAM REF LASSY DOOR FOAM REF LMAGNETSCREW-MACHINESCREW-TAPPINGSCREW-SPECIALSUPPORT-DOOR CLOSESUPPORT-DOOR CLOSESUPPORT-DOOR CLOSESTOPPER-DOOR LGROMMET-STOPPERASSY HANDLE-BAR REFASSY HANDLE-BAR REFASSY HANDLE-BAR REFSCREW-TAPPINGFILM-HANDLESUPPORT-HANDLE REF UPPSUPPORT-HANDLE REF LOWHANDLE-BAR REFHANDLE-BAR REFHANDLE-BAR REFCAP-HANDLE REFCAP-HANDLE REFCAP-HANDLE REASSY-GASKET DOOR REFASSY-GASKET DOOR REFASSY-FRENCHASSY-FRENCHASSY-FRENCHCASE-FRENCHHEATER CORD-FRENCHPLATE-FRENCHPLATE-FRENCHPLATE-FRENCHINSULATION-FRENCHSEAL-CUTT FRENCHCOVER-HEATER FRENCHGASKET-FRENCHGASKET-FRENCHGASKET-FRENCHGASKET-FRENCHGASKET-FRENCHGASKET-FRENCHCAP-CASE FRENCHCAP-CASE FRENCH MIDSPRING-ETC FRENCHPIN-FRENCH SPRINGCAP GUIDE FRENCH UPPSCREW-TAPPING

NW2-FDR,BLACK,-,-,-,BASIC NW2-FDR,WHITE,-,-,-,BASICNW2-FDR,INOX,-,-,-,BASICNW2-FDR,REAL STS,-,-,-,STS201(DY01CU),BASICHERMES,-,5x7x18,-,-,1200GaussTH,+,-,M5,L25,ZPC(WHT),SWRCH18A,FP,-FH,+,1,M4,L18,ZPC(WHT),SWRCH18AFH,+,-,M5,L25(15.5),PASS,STS304,1,-NEXT,POM,-,-,-,-,-NEXT,POM,-,-,-,SNOW WHITE,-AW-PJT,POM,-,-,-,CREAMY STS,-AW-PJT,SHP1,T2.9,-,-,-,-T3XW8XL8,NR,-,-,-,-,-,-,BLKNW2-FDR,MATURE BLACKNW2-FDR,SNOW WHITENW2-FDR,REAL STAINLESS,HAIR LINE #4FH,+,-,1,M4,L14,CR PLT,SWRCH18A,-NW2 FDR,PET,T0.125,TWO SIDE TAPENW2_FDR,POM,NTR,GF 10%NW2_FDR,POM,NTR,GF 10%NW2-FDR,AL,MATURE BLACKNW2-FDR,AL,SNOW WHITENW2-FDR,AL,REAL STAINLESS,HAIR LINE #4NW2_FDR,ABS,NTR,NI-CR PlatingNW2_FDR,ABS,I-BLACKNW2_FDR,ABS,SNOW WHITENW2-FDR,BLACK,-,-NW2-FDR,GRAY,-,- NW2-FDR,6W,BLACK,- NW2-FDR,6W,SNOW-WHT,-NW2-FDR,6W,THAI SILVER,-NW2-FDR,ABS,888.9,COOL WHITE (SC-02740R)NW2-PJT,P-CORD,6W,120V,2400,FRENCHNW2-FDR,SECC1,T0.8,41.1,879.3,ALL BLACK NW2-FDR,SECC1,T0.8,W41.1,L879.3,SNOW-WHITE,SC-97527TPNW2-FDR,SECC1,T0.8,W41.1,L879.3,THAI SILVER,SC-03012TNW2-FDR,FOAM-PS,883.0NW2-FDR,SPONGE+AL,-,T3,W35,L88°¶AW-PJT,PC(HF-1023IM),-,-,-,-,-,COOL-WHITE(SC-02740R,-AW-PJT,SF-PVC,-,-,-,BLACK,-,-AW-PJT,SILICON,-,W9.9,L41.1,WHITE,-,-AW-PJT,SILICON,-,W9.9,L41.1,GRAY,-,-NW2-FDR,SILICON,0.8,BLACKNW2-FDR,SILICON,0.8,-,-,WHITE,-,-NW2-FDR,SILICON,0.8,-,-,GRAY,-,-AW-PJT,ABS,-,-,-,-,-AW-PJT,ABS,-,-,-,-,-STS304,PI1.4,-,-,-,-,-RD-PVC,WHITE,-,-,-,-,-AW2 CD,POM,-,-,-,COOL WHITE,-PH,+,-,2S,M3,L8,ZPC(WHT),SWRCH18A,-

111111121111122221111

12221111111111111111111211111

75

EXPLODED VIEW& PARTS LIST Parts List of Refrigerator Door-Left (RF21*AC,RF19*AC)


4-154-16

567891011

DA61-03230B6002-0002136002-000468DA61-04440A6002-000213DA67-30218RDA63-05131ADA63-05035ADA63-05036A

HINGE-FRENCHSCREW-TAPPINGSCREW-TAPPINGFIXER HANDLESCREW-TAPPINGCAP-SCREWGUARD REF-UPPGUARD REF-MID GUARD REF-LOW

AW-PJT,PC(HF-1023IM),-,-,-,COOL-WHITE(SC-02740R,-,-TH,+,-,1,M4,L12,ZPC(WHT),SWRCH18A,-PH,+,-,2S,M5.0,L18,ZPC(WHT),SWRCH18A,-GUGGENHEIM,POM,-,NTR,STS / 2 HANDLETH,+,-,1,M4,L12,ZPC(WHT),SWRCH18A,--,PP,-,-,-,SC-97527R,SNOW WHITENW2-FDR,PP,COOL WHITE,SC-02740R NW2-FDR,PP,W302.5,L116.7,COOL WHITE(SC-02740R) NW2-FDR,PP,W304.6,L179.3,COOL WHITE(SC-02740R)

214222211

76


5-6) Disassembly of Refrigerator Door Right

1 3

7

7-1

7-2

9

8

10

1-1

1-7 1-5

1-21-6

1-4 1-3

64

5

2-3

2-6

2-1

2-5

2-4

2

77

EXPLODED VIEW& PARTS LIST Part List of Refrigerator Door-Right (RF21*AC,RF19*AC)


1111

1-11-21-31-41-51-51-51-61-7222

2-12-22-32-42-52-52-52-62-62-6334567

7-17-28910

DA91-02888ADA91-02888BDA91-02888CDA91-02888DDA61-03769A6001-0013776002-0011206009-001475DA61-02383ADA61-02383CDA61-02383EDA61-03212ADA63-40294ADA97-08879ADA97-08879BDA97-08879C6002-001364DA01-00622ADA61-06253ADA61-06254ADA64-03342ADA64-03342BDA64-03342CDA67-02673ADA67-02673BDA67-02673CDA97-07668ADA97-07668B6002-000468DA61-04440ADA64-01985ADA97-07681ADA63-05042ADA63-05050ADA63-05131ADA63-05035ADA63-05036A

ASSY DOOR FOAM REF RASSY DOOR FOAM REF RASSY DOOR FOAM REF RASSY DOOR FOAM REF RMAGNETSCREW-MACHINESCREW-TAPPINGSCREW-SPECIALSUPPORT-DOOR CLOSESUPPORT-DOOR CLOSESUPPORT-DOOR CLOSESTOPPER-DOOR LGROMMET-STOPPERASSY HANDLE-BAR REFASSY HANDLE-BAR REFASSY HANDLE-BAR REFSCREW-TAPPINGFILM-HANDLESUPPORT-HANDLE REF UPPSUPPORT-HANDLE REF LOWHANDLE-BAR REFHANDLE-BAR REFHANDLE-BAR REFCAP-HANDLE REFCAP-HANDLE REFCAP-HANDLE REFASSY-GASKET DOOR REFASSY-GASKET DOOR REFSCREW-TAPPINGFIXER HANDLEMASCOTASSY GUARD-DAIRYGUARD-DAIRYCOVER-GUARD DAIRYGUARD REF-UPPGUARD REF-MID GUARD REF-LOW

NW2-FDR,EMPIRE-BLACKNW2-FDR,SNOW WHITENW2-FDR,PLATINUM INOXNW2-FDR,REAL STAINLESSHERMES,-,5x7x18,-,-,1200GaussTH,+,-,M5,L25,ZPC(WHT),SWRCH18A,FP,-FH,+,1,M4,L18,ZPC(WHT),SWRCH18AFH,+,-,M5,L25(15.5),PASS,STS304,1,-NEXT,POM,-,-,-,-,-NEXT,POM,-,-,-,SNOW WHITE,-AW-PJT,POM,-,-,-,CREAMY STS,-AW-PJT,SHP1,T2.9,-,-,-,-T3XW8XL8,NR,-,-,-,-,-,-,BLKNW2-FDR,MATURE BLACKNW2-FDR,SNOW WHITENW2-FDR,REAL STAINLESS,HAIR LINE #4FH,+,-,1,M4,L14,CR PLT,SWRCH18A,-NW2 FDR,PET,T0.125,TWO SIDE TAPENW2_FDR,POM,NTR,GF 10%NW2_FDR,POM,NTR,GF 10%NW2-FDR,AL,MATURE BLACKNW2-FDR,AL,SNOW WHITENW2-FDR,AL,REAL STAINLESS,HAIR LINE #4NW2_FDR,ABS,NTR,NI-CR PlatingNW2_FDR,ABS,I-BLACKNW2_FDR,ABS,SNOW WHITENW2-FDR,BLACK,-,-NW2-FDR,GRAY,-,-PH,+,-,2S,M5.0,L18,ZPC(WHT),SWRCH18A,-GUGGENHEIM,POM,-,NTR,STS / 2 HANDLESBS,AL,T1.6,-,L90,Fixing-type,Siver,forging

NW2-FDR,PP,COOL WHITE,SC-02740R NW2-FDR,PP,W302.5,L116.7,COOL WHITE(SC-02740R) NW2-FDR,PP,W304.6,L179.3,COOL WHITE(SC-02740R)

111111121111122221111

122211421111111

78

5 . EXPLODED VIEW& PARTS LIST

5-1) Freezer

1

1-1

1-2

1-4

1-41-3

1-6

1-5

1-5

5

9-1

9-49-5

9-6 9-79-8

9-9

9-2

9-3

6-1

6-2

67-1

5-2

5-1

7-2

7

88-2

8-3

8-18-4

8-5

9

2

3

3-1

3-3

4-3

4-5

4-14-8

4-2

4-4

4-5

4-7

4-6

3-2

4

79

DA97-08860ADA63-04455ADA63-04456ADA63-05606ADA66-10104ADA71-20145ADA64-02823ADA90-04793ADA61-03189ADA67-01231ADA63-05155ADA97-04845BDA61-03189ADA63-05155ADA67-01231ADA96-00480ADA60-90005ADA61-02901ADA61-04462ADA47-00243CDA97-08607ADA63-04955ADA96-00398KDA97-06665ADA61-04484ADA63-40006ADA97-06666ADA61-04483ADA63-40006ADA97-06672ADA63-04458ADA63-04460ADA63-04461ADA66-10104ADA71-20145ADA97-06657CDA63-04444ADA62-01942ADA61-04461ADA63-01809ADA31-00124ADA61-03183ADA63-01808ADA31-00146HDA63-01146A

11-11-21-31-41-51-62

2-12-22-33

3-13-23-34

4-14-24-34-45

5-15-26

6-16-27

7-17-28

8-18-28-38-48-59

9-19-29-39-49-59-69-79-89-9



ASSY TRAY-FRE UPPCOVER-TRAY FRE UPP ACOVER-TRAY FRE UPP BTRAY FRE-UPPROLLER-FREFIXER-ROLLERWINDOW-TRAY FRE UPPASSY ICE MAKERCASE-ICE CUBESCOOP ICETRAY-CASE ICE CUBEASSY CASE-ICE CUBECASE-ICE CUBETRAY-CASE ICE CUBESCOOP ICEASSY EVAP FRERIVET AVEXFIXER SENSOR EVAPPLATE DRAIN FRETHERMO BIMETAL PROTECTORASSY COVER-LAMP FRECOVER-LAMP FREASSY-LAMP LEDASSY RAIL-FRE LOW LRAIL-FRE LOW LGROMMETASSY RAIL-FRE LOW RRAIL-FRE LOW RGROMMETASSY TRAY-FRE LOWTRAY-FRE LOWCOVER-TRAY FRE LOW BCOVER-TRAY FRE LOW AROLLER-FREFIXER-ROLLERASSY COVER EVAP-FRECOVER-EVAP FREINSULATION-EVAP FREPLATE-INS EVAP FRECOVER MOTOR-BLDCFAN-AX100W4CC-T1CASE-MOTOR FREGROMMET-MOTOR,FRONTMOTOR BLDCGROMMET-MOTOR,REAR

NW2-PJT,-,-,-,-,19CU ftNW2-PJT,HIPS,-,-,-,-,-,COOL WHT,-NW2-PJT,GPPS,-,-,-,-,-,-,-NW2(19Cu.ft),HIPS,-,-,-,-,COOL WHITE,-POM,-,-,D22,-,-,-,PA,--,-NW2,SAN,-,-,-,-,NTR,-NW2,AUTO ICE MAKER,-,-,-,-AW-PJT,PP,-,-,-,COOL WHITE,-W2-PJT(05),PP(BJ-703T4),-,-,SC-02740R,-AW2-CD,LDPE,NTRNW2-FDRAW-PJT,PP,-,-,-,COOL WHITE,-AW2 CD,LDPE,NTRW2-PJT(05),PP(BJ-703T4),-,-,SC-02740R,-NW2-PJT,-,-,-,-,-,-,115V/240W,-AL,D3.2,L9.83,-,-CORE-PJT,PP,-,NTR,-NW2-PJT,GALVANUME,T0.3,-,516,-,-AW-PJT(R),BT-121-M,PW-5M1NNW2 FDRAW2 CD,PC,-,-,-,-,-,NTR,-NW2 FDR,3chip 4EANW2-PJT,-,-,-,-,19INCHNW2-PJT,ABS,-,-,-,COOL WHT,19INCH RAIL,NY-6,-,-,-,-,-,-,RAILNW2-PJT,-,-,-,-,19INCHNW2-PJT,ABS,-,-,-,COOL WHT,21INCHRAIL,NY-6,-,-,-,-,-,-,RAILNW2-PJT,-,-,-,-,19CU ft NW2-PJT,HIPS,-,-,-,-,COOL WHT,19INCHNW2-PJT,GPPS,-,-,-,-,-,-,-NW2-PJT,HIPS,-,-,-,-,-,COOL WHT,-POM,-,-,D22,-,-,-,PA,--,-NW2-PJT,110V~227VNW2-PJT,PP,-,-,-,-,-,COOL WHT,-NW2-PJT,FOAM-PS,-,-,-,-,-,-,-NW2-PJT,GALVALUME,T0.3,-,-,-,-BLDC-NEW,PP,NTR,-,-,-,-,-,BJ-730-,TD-PJT,ABS,-,-AW-PJT,BUBBLE PP,-,-,-,NTR,-BLDC,NBR,BLACK,-,-,-,-,-,H20-,2950,-,DC12V,150mA,-,-,2.1W,-,-,-,-,-,-,-A-TOP,NBR,-,-,-,ID6.5,OD42,BLK,BLDC

1111441111

1111111111111111111111441111111111

80

DA97-08859ADA63-04455ADA63-04456ADA63-05607ADA66-10104ADA71-20145ADA61-02823ADA90-04793CDA97-04845BDA61-03189ADA63-05155ADA67-01231ADA96-00480ADA60-90005ADA61-02901ADA61-04462ADA47-00243CDA97-08607ADA63-04955ADA96-00398KDA97-06668ADA61-04481ADA63-40006ADA97-06667ADA61-04482ADA63-40006ADA97-06671BDA63-04459ADA63-04460ADA63-04461ADA66-10104ADA91-20145ADA97-06657CDA63-04444ADA62-01942ADA61-04461ADA63-01809ADA31-00124ADA61-03183ADA63-01808ADA31-00146HDA63-01146A

11-11-21-31-41-51-623

3-13-23-34

4-14-24-34-45

5-15-26

6-16-27

7-17-28

8-18-28-38-48-59

9-19-29-39-49-59-69-79-89-9



ASSY TRAY-FRE UPPCOVER-TRAY FRE UPP ACOVER-TRAY FRE UPP BTRAY-FRE UPPROLLER-FREFIXER-ROLLERWINDOW-TRAY FRE UPPASSY ICE MAKERASSY CASE-ICE CUBECASE-ICE CUBETRAY-CASE ICE CUBESCOOP ICEASSY EVAP FRERIVET AVEXFIXER SENSOR EVAPPLATE DRAIN FRETHERMO BIMETAL PROTECTORASSY COVER-LAMP FRECOVER-LAMP FREASSY-LAMP LEDASSY RAIL FRE LOW LRAIL FRE LOW LGROMMETASSY RAIL FRE LOW RRAIL FRE LOW RGROMMETASSY TRAY FRE LOWTRAY FRE LOWCOVER TRAY FRE LOW BCOVER TRAY FRE LOW AROLLER FREFIXER ROLLERASSY COVER EVAP-FRECOVER-EVAP FREINSULATION-EVAP FREPLATE-INS EVAP FRECOVER MOTOR-BLDCFAN-AX100W4CC-T1CASE-MOTOR FREGROMMET-MOTOR,FRONTMOTOR BLDCGROMMET-MOTOR,REAR

NW2-FDR,21cu.ftNW2-PJT,HIPS,-,-,-,-,-,COOL WHT,-NW2-PJT,GPPS,-,-,-,-,-,-,-NW2-SEARS,HIPS,COOL WHITE(SC-2740R),21Cu.ftPOM,-,-,D22,-,-,-,PA,--,-NW2,SAN,-,-,-,-,NTR,-NW2-FDR,AUTO ICE MAKERNW2-FDRAW-PJT,PP,-,-,-,COOL WHITE,-AW2 CD,LDPE,NTRW2-PJT(05),PP(BJ-703T4),-,-,SC-02740R,-NW2-PJT,-,-,-,-,-,-,115V/240W,-AL,D3.2,L9.83,-,-CORE-PJT,PP,-,NTR,-NW2-PJT,GALVANUME,T0.3,-,516,-,-AW-PJT(R),BT-121-M,PW-5M1NNW2 FDRAW2 CD,PC,-,-,-,-,-,NTR,-NW2 FDR,3chip 4EANW2-PJT,-,-,-,-,21INCHNW2-PJT,ABS,-,-,-,COOL WHT,21INCHRAIL,NY-5,-,-,-,-,-,-,RAILNW2-PJT,-,-,-,-,21INCHNW2-PJT,ABS,-,-,-,COOL WHT,21INCHRAIL,NY-6,-,-,-,-,-,-,RAILNW2-PJT,-,-,-,COOL WHITE,21CU ftNW2-PJT,HIPS,-,-,-,-,COOL WHT,21INCHNW2-PJT,GPPS,-,-,-,-,-,-,-NW2-PJT,HIPS,-,-,-,-,-,COOL WHT,-POM,-,-,D22,-,--,PA,-,-NW2-PJT,110V~227VNW2-PJT,PP,-,-,-,-,-,COOL WHT,-NW2-PJT,FOAM-PS,-,-,-,-,-,-,-NW2-PJT,GALVALUME,T0.3,-,-,-,-BLDC-NEW,PP,NTR,-,-,-,-,-,BJ-730-,TD-PJT,ABS,-,-AW-PJT,BUBBLE PP,-,-,-,NTR,-BLDC,NBR,BLACK,-,-,-,-,-,H20-,2950,-,DC12V,150mA,-,-,2.1W,-,-,-,-,-,-,-A-TOP,NBR,-,-,-,ID6.5,OD42,BLK,BLDC

111122111111111111111111111111441111111111

81


5-2)Cabinet

11

14-1

14

14-3

14-4

13

14-4-5

14-4-714-4-3

14-5

14-4-2

14-215

15-315-1

15-115-415-2

14-4-114-4-4

8

12

10

9

17

2119

19

17-2

17-1 20

20-320-120-218

2-1

4

54-2

4-4

4-14-3 5-2

5-45-1

5-3

2

32-2

3-13-2

16

16-2

16-1

1

1-41-2

1-31-6

1-5

1-7 1-8

1-1

7

6

6

82

EXPLODED VIEW& PARTS LIST Parts List of Cabinet (RF195/215AC)


111

1-11-21-31-41-41-41-51-61-71-71-71-82

2-12-23

3-13-24

4-14-24-34-45

5-15-25-35-467891011121314

14-114-214-314-4

14-4-114-4-214-4-314-4-414-4-514-4-614-5

DA97-07654ADA97-07654BDA97-07654CDA34-00043C DA41-00635A DA61-05316A DA64-02960ADA64-02960BDA64-02960CDA61-04052A DA64-02071A DA64-02981ADA64-02981BDA64-02981CDA96-00571A DA97-06715C DA61-04475B DA63-02527C DA97-06716D DA61-04476B DA63-02527C DA97-07514C DA61-04916D DA66-00444A 6011-001442 DA63-04694D DA97-07515C DA61-04917D DA66-00444A 6011-001442 DA63-04694D DA63-02905A DA97-07835AMK162DL1U/E09DA63-02017A DA60-20008ADA63-00783ADA97-04049ADA62-01514ADA97-07655ADA62-00954ADA63-04466ADA97-07653ADA97-03145LDA31-00146BDA61-02349BDA61-02355BDA63-01146ADA63-40167ADA96-00042ADA31-00010D

ASSY-TOP TABLE ASSY-TOP TABLE ASSY-TOP TABLE SWITCH REED-ASS'Y PBA PANEL CASE-PBA DISPLAY TOP TABLE TOP TABLE TOP TABLE PLATE-TOP TABLE BUTTON-CONTROL INLAY-DISPLAYINLAY-DISPLAYINLAY-DISPLAY

ASSY W/HARNESS-TOP TABLEASSY HINGE UPP-L HINGE-UPP L SHIM HINGE-UPP ASSY HINGE UPP-R HINGE-UPP R SHIM HINGE-UPP ASSY HINGE MID-L HINGE-MID L SHAFT HINGE-MID R BOLT-SOCKET SHIM HINGE-MID ASSY HINGE MID-R HINGE-MID R SHAFT HINGE-MID R BOLT-SOCKET SHIM HINGE-MID GROMMET HINGE-MID,R ASSY COVER COMP COMPRESSORGROMMET COMPBOLT-HEXCOVER PCB PANELASSY CAP-DRAINDRYERASSY TRAY-DRAIN WATERSEAL-SUB CONDTRAY DRAIN-WATERASSY PIPE-CONDENSERASSY SUPPORT-CIRCUIT MOTORMOTOR BLDCSUPPORT-CIRCUIT MOTORBRACKET-CIRCUIT MOTORGROMMET-MOTOR,REARGROMMET-COVER CHILASSY-HARNESS MOTORFAN-ASS'Y

NW2-FDR,I BLACK(SC-00477R),BLUE LED(Fahrenheit)NW2-FDR,SNOW WHITE(SC-97527R),BLUE LED(Fahrenheit)NW2-FDR,CREAMY STS(SC-07009R),BLUE LED(Fahrenheit)200VDC,1.5A,-NW2 FDR-PJT,DOOR REF,FR-4,300*19.5*1.6T,BLUE LED,12V, 5V,-,N,-,-,- NW2-FDR,HIPS,L303.2,NTR NW2-FDR,ABS,I-BLACK (SC-00477R),T2.0,L811NW2-FDR,ABS,SNOW WHITE(SC-97527TP),T2.0,L812.0NW2-FDR,ABS,CREAMY STS(SC-07009R),T2.0,L812.0AW-PJT,SBHG1,T0.3,67.8,115,-,AW-BASICAW-PJT,GPPS,-,-,NTR,-NW2-FDR,PC,T0.25,I BLACK(SC-00477R),FahrenheitNW2-FDR,PC,T0.25,SNOW WHITE(SC-97527R),FahrenheitNW2-FDR,PC,T0.25,CREAMY STS(SC-07009R),FahrenheitNW2-PJT,FDRNW2,T3.0,-,-,BLACK,-,- NW2-PJT,SHP1,T3.0,-,-,-,-,-NW2-PJT(05),HIPS,T1.0,-,-,-,-NW2,T3.0,-,-,BLACK,-,-NW2-PJT,SHP1,T3.0,-,-,BLACK,-,- NW2-PJT(05),HIPS,T1.0,-,-,-,-AW2 CD-PJT,T4.5,-,-,Ni-Cr Plated,-,- AW2,SHP1,T4.5,Ni-Cr+Cu Plating,Heat Treatment,SNC2NEXT-PJT,AW,SM10C,-,OD11.2,-,-,- M8,L13.4,ZPC(BLK),SCM435,- AW2,RD-PVC,T1.0,-,-,NTR,- AW2 CD-PJT,T4.5,-,-,Ni-Cr Plated,-,- AW2,SHP1,T4.5,Ni-Cr+Cu Plating,Heat Treatment,SNC2NEXT-PJT,AW,SM10C,-,OD11.2,-,-,- M8,L13.4,ZPC(BLK),SCM435,- AW2,RD-PVC,T1.0,-,-,NTR,-NEXT,POM,T2.0,-,-,-,-,WHITE,- NW2-FDR,T0.4,W263.6,L716.06.15CC,115/127V~60HZ,RSCRQUEEN,EPDM,-,-,-,-,-,BLACK,-S25C,M6,-,-,L42.6,WHITE,-,ZPCA-TOP,N-ABS,-,-,-,-,-,- EPEL,ASSY,-,-,L224.5,-,SOFT-PVCC1220T,OD18.70,L114,-,-,-NW2-FDR,PP SCRAP,SPIRAL COND. W2-05,FOAM-PE,-,T7,-,-,-NW2,PP,-,-,-,-,NTR,-NW2-FDRAW2-PJT,-,-,-,-,1550RPM,2.7WDRCP5030LA,1560,-,DC12V,230mA,-,-,2.7W,ATOPNEXT,ABS,-,-,-,NTR,-ABS,NEXT,-,-,-,NTR,-A-TOP,NBR,-,-,-,ID6.5,OD42,BLK,BLDCSILICON,T3.0,-,L16,-,-,BLACK,-A-TOP UL(MOTOR),C-FAN,350MMET,ZIPEL,ASSY,-,UNIT,_150

111211111111111111111111111111114114121111111111111

83

EXPLODED VIEW& PARTS LIST Parts List of Cabinet (RF195/215AC)


1515-115-215-315-4161616

16-116-116-116-216-216-217

17-117-217-31819

DA97-06815BDA66-00649ADA61-04703ADA64-02694ADA71-50240ADA97-07836BDA97-07836CDA97-07836ADA63-05106BDA63-05106CDA63-05106ADA67-02071BDA67-02071CDA67-02071ADA97-06688B DA61-04977A DA61-04490A DA71-50240B DA61-04702A DA61-01920A

ASSY CHASSIS COMPSHAFT-CASTERCASTER-REARCHASSIS COMPBRACKET-CABIASSY COVER LEG FRONTASSY COVER LEG FRONTASSY COVER LEG FRONTCOVER LEG-FRONT COVER LEG-FRONT COVER LEG-FRONT CAP LEG FRONTCAP LEG FRONTCAP LEG FRONTASSY SUPPORT-FOOT FRONTFOOT-FRONT SUPPORT-FOOT FRONT BRACKET-CABI CASTER-FRONT CASTER-RIVET

NW2/FDR,CASTER(TPE)AW-PJT,MSWR10,L46,OD8.2,-,-,ZPC2 / 2AW-PJT,PP,-,35,NTR,35,PP+TPE / 2NW2,SBHG1,T1.2,-,-,-,-ALL,SBHG1,T1.6,-,-,-,-NW2-FDR,I-BLACK,DRAWERNW2-FDR,SNOW WHITE,DRAWER NW2-FDR,CREAMY-STS,DRAWERNW2,PP,I-BLACK(SC-00477R),NEW09NW2,PP,SNOW WHITE(SC-97527R),NEW09NW2,PP,CREAMY STSNW2,PP,-,-,-,I-BLACK,SC-00477RNW2,PP,-,-,-,SNOW WHITE,SC-97527RNW2,PP,-,-,-,CREAMY STS,-NW2-FDR,FOOT FRONT(DA61-04977A) / 2 AW2-PJT,PP+MSWR10,-,BLACK,-,-,- / 2NW2,SHP1,T4.0,-,-,-,- / 2T3-PJT,SBHG1,T1.6,-,-,-,- AW-PJT,PP,-,35,NTR,35,PP+TPE (ZPC2),MSWR10,OD8.0,L54,-,-,-

12211111111222211

22

84


5-3) Disassembly of Freezer Door

1-1-1

1-1

1

1-2

1-1-2

1-1-3

85


Parts List of Freezer Door (RF195/215AC)


1111

1-11-11-11-1

1-1-11-1-21-1-21-1-21-1-31-21-2

DA90-05618ADA90-05618BDA90-05618CDA90-05618DDA91-02961ADA91-02961BDA91-02961CDA91-02961DDA61-03769ADA61-02773DDA61-02773ADA61-02773C6001-001377DA97-07722ADA97-07722B

ASSY DOOR FRE(SWING)ASSY DOOR FRE(SWING)ASSY DOOR FRE(SWING)ASSY DOOR FRE(SWING)ASSY DOOR FOAM FRE(SWING)ASSY DOOR FOAM FRE(SWING)ASSY DOOR FOAM FRE(SWING)ASSY DOOR FOAM FRE(SWING)MAGNETSTOPPER-DOORSTOPPER-DOORSTOPPER-DOORSCREW-MACHINEASSY-GASKET DOOR FREASSY-GASKET DOOR FRE

SECC1,EMPIRE BLACK,SIDE HANDLE,SWING TYPE,CLEAR COATING-PCMSECC1,SNOW WHITE,SIDE HANDLE,SWING TYPE,CLEAR COATING-PCMSECC1,PLATINUM INOX,SIDE HANDLE,SWING TYPE,VCMSTS201(DY01CU),REAL-STS,SIDE HANDLE,SWING TYPE,NO.4,Un-coatingNW2-FDR,EMPIRE BLACK,PCM,SWING-TYPENW2-FDR,SNOW WHITE,PCM,SWING-TYPENW2-FDR,PLATINUM INOX,VCM,SWING-TYPENW2-FDR,REAL-STS,DY01CU,SWING-TYPEHERMES,-,5x7x18,-,-,1200GaussNW2,POM(TP-20),-,-,-,I-BLACK(SC-00477R),- CORE,POM,-,-,-,NTR,-NW2,POM(TP-20),-,-,-,CREAMY STS(SC-07009R),-TH,+,-,M5,L25,ZPC(WHT),SWRCH18A,FP,-NW2-FDR,BLACK,-,- NW2-FDR,GRAY,-,-

111111111111111

86

6-1) PCB L ayout with part position (Main Board)

6. PCB DIAGRAM

1. DC12V,5V, & GND are supplied from SMPS PCB.

2. FAN MOTOR driving part : Supply the power from 8.3V~12V to motor according to the motor type(F,R,C,ICE).

3. EEPROM : Save and record every kinds of data.

4. Transmit inputted signals from every sensor into MICOM after eliminate the noise.

5. Departure part : Generate the CLOCK which needs to conrol MICOM program RESET control circuit part :

Initialize the program by sensing power ON/OFF.

6. BUZZER Circuit

7. PLC Input / Output

- PLC (Power Line communication)

* Option(PLC module is not inserted unless specified occasion.)

8. Operate ICE-MAKER, supply power to MOTOR, and sense the variation of switch.

9. Display driving part : Display LED & detect KEY state.

10. Relay part which controls AC load : Operate by receiving the driving signals of MICOM through Sink IC.

(RY75/RY76's Relay to LED Lamp operation use.(DC12V)

11. Connector part : Connect AC load.

12. DIODE option setting part : Set the option

13. Inverter Control part

87

6-2) Connector Layout with part position (Main Board)

PCB DIAGRAM

88

7. Wiring Diagram

89

8-1) Refrigerator Block Diagram

8. Schematic Diagram

90

SchematicDiagram

8-2) Main

272, Oseon-Dong, Gwangsan-Gu,Gwangju-City, Korea, 506-253 TEL : 82-62-950-6193, 6896FAX : 82-62-950-6829

© Samsung Electronics Co., Ltd. Refrigerator Division 2009.04Printed in Korea

- This Service Manual is a property of Samsung Electronics Co., Ltd.Any unauthorized use of Manual can be punished under applicable International or domestic law.

Documents

RF195AC RF197AC RF215AC RF217AC Samsung Bottom Mount Refrigerator