Upload
ivan-gudelj
View
1.221
Download
13
Embed Size (px)
Citation preview
Hydraulics Bosch Rexroth AGRE 90005-04/04.10
Compact Hydraulics Page
01
Load holding/Motion control 5
Modular directional valves 443
02
Flow diverters 695
03
Special directional valves 809
04
Compact power modules 849
053
Bosch Rexroth AG Hydraulics RE 90005-04/04.10
ContentsPage
Compact HydraulicsLoad holding/Motion control, pilot operated check valves 5
01
Load holding/Motion control, counterbalance valves 55
Load holding/Motion control, counterbalance valves with regenerative functions 151
Load holding/Motion control, valves for motors: dual cross over relief 167
Load holding/Motion control, valves for motors: single counterbalance with brake release port 191
Load holding/Motion control, valves for motors: dual counterbalance with brake release port 211
Load holding/Motion control, valves for motors: motion control 233
Load holding/Motion control, load lowering and relief valves 259
Load holding/Motion control, check and metering valves 265
Load holding/Motion control, flow regulators 295
Load holding/Motion control, auxiliary valves: pressure reducing 381
Load holding/Motion control, auxiliary valves: sequence 389
Load holding/Motion control, auxiliary valves: shuttle 401
Load holding/Motion control, special valves 413
Modular directional valves, inlet elements 443
02
Modular directional valves, directional valve elements EDB series 487
Modular directional valves, directional valve elements ED series 543
Modular directional valves, intermediate elements 617
Modular directional valves, flangeable elements 633
Modular directional valves, outlet elements 655
Modular directional valves, accessories 667
Flow diverters, 3/2 ways/positions 695
03Flow diverters, 6/2 ways/positions 721
Flow diverters, 6 up to 14/2 ways/positions bankable 763
Flow diverters, 8/2 ways/positions 799
Special directional valves 809 04
Compact power modules 849 05
4
Bosch Rexroth Oil Control S.p.A.RE 90005-04/04.10
3/2 ways/positions fl ow diverters VS 70 4 G 1/4 310 [4500] 20 [5.3] 18302-01 697
3/2 ways/positions fl ow diverters
VS81VS82VS84VS85
6
G 3/8G 1/2SAE 6SAE 8
310 [4500] 60 [15.9] 18302-02 705
3/2 ways/positions fl ow divertersVS91VS92 VS95
12G 1/2G 3/4SAE 12
310 [4500] 140 [37] 18302-03 713
Flow diverters3/2 ways/positions
The latest information on products can also be found on Bosch Rexroth web-site:www.boschrexroth.com
pmax Qmax Designation Type Size Interface bar l/min Data sheet Page [psi] [gpm]
03
695
Bosch Rexroth Oil Control S.p.A.RE 90005-04/04.10
696
RE 18302-01/12.09 1/8
Linear Motion andAssembly Technologies ServicePneumaticsHydraulics
Electric Drives and Controls
DVI0050
3/2 ways/positions flow diverters
L700... (VS70)
Size 4Series 00Maximum operating pressure 310 bar [4500 psi]Maximum flow 20 l/min [5.3 gpm]Ports G 1/4
Summary General specifications
- 3 way 2 position valve.
- Directional spool valve with direct solenoid control.
- Upon request, hydraulic / pneumatic pilot , or manual push and
twist control.
- Control spool operated by screwed-in solenoid, with easily
extractable coil fastened by a ring nut.
- Wet pin tube for DC coil, with push rod for mechanical
override in case of voltage shortage.
- Unrestricted 360° orientation of DC coil.
- Control spool held in normal position by return spring.
- Optional manual override (push-button or screw type).
- Connectors available: DIN 43650 – ISO 4400, AMP Junior,
DT04-2P (Deutsch), Free leads
Description Page
General specifications 1
Ordering details 2
Spool variants 2
Principles of operation, cross section 3
Technical data 3
p-Qv characteristic curves 5
External dimensions and fittings 6
Electric connections 7
697
VS70 RE 18302-01/12.092/8 Bosch Rexroth Oil Control S.p.A.
L 7 0 0 2 _ _ _ _ _ _ _ _ _ 0
3A 3N
C1 C2
P
1 0aI
C1 C2
P
1 0aE
Ordering details
Spool variants
Family
Compact directional
valve
Type
Flow Diverters
Ports
G 1/4 DIN3852
Control type
Solenoid (coil C36) without
emergency = 10
Solenoid (coil C36) with
push-button type emergency = 1P
Solenoid (coil C36) with
screw type emergency = 1F
Hydraulic / pneumatic control = P1
Spool variants
Transitory position closed = 3A
Transitory position open = 3N
Drain type
Internal drain = I
External drain = E
Electric connections
00 = Without coil
01 = With coil, without connector
02 = With coil and with non-assembled connector,
type DIN 43650 – ISO 4400
03 = With coil having AMP Junior connector
04 = With coil having AMP Junior Horiz. connector
07 = With coil having DEUTSCH DT 04-2P connect.
31 = With coil and bipolar sheathed lead 350mm
[13.8”] long
Voltage supply
00 = Without coil
OB = 12V DC
AD = 13V DC
OC = 24V DC
AC = 27V DC
OD = 48V DC
OE = 110V DC
31 07 04 03 02 01 00
Available connections
698
RE 18302-01/12.09 VS70 Bosch Rexroth Oil Control S.p.A. 3/8
7 6 5 2 1 3 4
C1 P C2
Principles of operation, cross section
A valve basically consists of a housing (1), a control spool (2),
a return spring (3) and a solenoid (5). It is designed to select
which one of two circuits (C1 or C2) is to be supplied with the
oil delivered from one single hose (P): with spool in position
“0”, when the solenoid is de-energized, the flow goes from P to
C1, with spool in position “1”, when the solenoid is energized
the flow goes from P to C2.
With the coil de-energized, the return spring (3) pushes back
the spool (2) and holds it in position “0”.
The coil (5) is fastened to the tube by the ring nut (6).
The manual override (7) allows to shift the spool (2) also in
case of voltage shortage.
An external drain (4), to be connected to tank, ensures shifting
operations also at higher working pressure.
Hydraulic / pneumatic pilot control for spool shifting is available
upon request.
General
Valve weight kg [lbs] 0.89 [1.960]
Ambient Temperature °C [°F] –20....+50 [-4....+122] (NBR seals)
Hydraulic
Maximum pressure with external drain bar [psi] 310 [4500]
Maximum pressure with internal drain bar [psi] 250 [3625]
Maximum flow l/min [gpm] 20 [5.3]
Hydraulic fluid
General properties: it must have physical lubricating and chemical properties suitable for use in hydraulic systems such as, for example:
Mineral oil based hydraulic fluids HL (DIN 51524 part 1).
Mineral oil based hydraulic fluids HLP (DIN 51524 part 2). For use of environmentally acceptable fluids (vegetable or polyglycol base)
please consult us.
Fluid Temperature °C [°F] –20....+80 [-4....+176] (NBR seals)
Permissible degree of fluid contamination
ISO 4572: x 75 X=12...15
ISO 4406: class 20/18/15
NAS 1638: class 9
Viscosity range mm2/s 5....420
Internal leakage with 100 bar [1450 psi] secondary pressure at C
cc/min [in3/min] min.7 [0.43] max. 15 [0.74]
Technical Data (for applications with different specifications consult us)
03
699
VS70 RE 18302-01/12.094/8 Bosch Rexroth Oil Control S.p.A.
Electrical
Voltage type DC
Voltage tolerance (nominal voltage) % -10 .... +10
Duty Continuous, with ambient temperature 50°C [122°F]
Maximum coil temperature °C [°F] 150 [302]
Insulation class H
Compliance with Low Voltage Directive LVD 73/23/EC (2006/95/EC), 2004/108/EC
Coil weight with connection EN 175301-803 kg [lbs] 0.215 [0.44]
Voltage V 12 13 24 27 48 110
Voltage type DC DC DC DC DC DC
Power consumption W 26 26 26 26 26 26
Current (1) A 2.15 2.00 1.10 1.00 0.54 0.27
Resistance (2) 5.5 6.5 22 28 89 413
1) Nominal - 2) ± 7% at temperature 20°C [68°F]
Voltage (V) Connector type Coil description Marking Coil Mat no.
=OB 01
=OB 0212 DC
EN 175301-803
(Ex. DIN 43650)C3601 12DC 12 DC R933000044
=OB 03 12 DC AMP JUNIOR C3603 12DC 12 DC R933000047
=OB 04 12 DC AMP JUNIOR Horizontal C3604 12DC 12 DC R933002913
=OB 07 12 DC DEUTSCH DT 04-2P C3607 12DC 12 DC R933000048
=OB 31 12 DC Cable 350 mm long C3631 12DC 12 DC R933000045
=AD 01
=AD 0213 DC
EN 175301-803
(Ex. DIN 43650)C3601 13DC 13 DC R933000051
=AD 07 13 DC DEUTSCH DT 04-2P C3607 13DC 13 DC R933000049
=OC 01
=OC 0224 DC
EN 175301-803
(Ex. DIN 43650)C3601 24DC 24 DC R933000053
=OC 03 24 DC AMP JUNIOR C3603 24DC 24 DC R933000057
=OC 04 24 DC AMP JUNIOR Horizontal C3604 24DC 24 DC R933002914
=OC 07 24 DC DEUTSCH DT 04-2P C3607 24DC 24 DC R933000058
=OC 31 24 DC Cable 350 mm long C3637 24DC 24 DC R933000055
=AC 01
=AC 0227 DC
EN 175301-803
(Ex. DIN 43650)C3601 27DC 27 DC R933000056
=AC 07 27 DC DEUTSCH DT 04-2P C3607 27DC 27 DC R933000050
=OD 01
=OD 0248 DC
EN 175301-803
(Ex. DIN 43650)C3601 48DC 48 DC R933000059
=OD 04 48 DC AMP JUNIOR Horizontal C3604 48DC 48 DC R933002915
=OE 01
=OE 02110 DC
EN 175301-803
(Ex. DIN 43650)C3601 110DC 110 DC R933000061
700
RE 18302-01/12.09 VS70 Bosch Rexroth Oil Control S.p.A. 5/8
0 5 10 15 20 l/min
bar
1514
12
10
8
6
4
2
0
0 1 2 3 4 5 5.3 gpm
psi
220
200
150
100
50
0
1 2bar
350
300
250
200
150
100
50
0
psi
5000
4000
3000
2000
1000
0
PR
ES
SU
RE
-p
FLOW-Q
PR
ES
SU
RE
-p
0 5 10 15 20 l/min
0 1 2 3 4 5 5.3 gpmFLOW-Q
Characteristic curves
Measured with hydraulic fluid ISO-VG32 at 45° ± 5° C [113° ± 9° F]; ambient temperature 20° C [68° F].
Performances limits
The performance limits refer to the following conditions: coils at operating temperature, voltage supply 10% below
nominal, no back pressure in the tank line.
Curve n. Drain type
1 External (-E-)
2 Internal (-I-)
03
701
VS70 RE 18302-01/12.096/8 Bosch Rexroth Oil Control S.p.A.
External Dimensions and Fittings
1 Solenoid tube hex 22 mm. Torque 20-22Nm [14.7-16.2 ft-lb].
2 Plug for version with external drain hex 22 mm.
Torque 20-22Nm [14.7-16.2 ft-lb].
3 Ring nut for coil locking OD 20,4 mm [8 in].Torque 3 – 4 Nm [2.2 – 3.0 ft-lb].
4 Two through holes for installation. Recommended screws
M5 with strength class DIN 8.8. Torque 5-6Nm[3.6-4.4 ft-lb].
5 Ports P, C1, C2, External drain, hydraulic/pneumatic pilot port
G 1/4.
6 Optional push-button type emergency for spool opening: it
is pressure stuck to the ring nut 5-6Nm [3.7-4.4 ft-lb] for coil
locking. Mat no. R933000042.
7 Optional screw type emergency for spool opening: it
is screwed torque 6-7Nm [4.4-5.2 ft-lb] to the tube as
replacement of the coil ring nut. Mat no. R933000021.
8 Plug for version with internal drain hex 22 mm.
Torque20-22Nm [14.7-16.2 ft-lb].
9 Minimum clearance needed for connector removal.
10 Identification label.
11 Hydraulic, or pneumatic pilot connector: hex 30 mm.
Torque 20-22 Nm [14.7-16.2 ft-lb].
702
RE 18302-01/12.09 VS70 Bosch Rexroth Oil Control S.p.A. 7/8
=00 =01
=02
=03
=07=31
=04
Electric connection
With coils and with connectors non-assembled, type EN 175301-803.
Protection class: IP 65 when connector with seal is properly screwed down, and cable clamp is correctly tightened.
Without coils, but with ring nut and O-Rings for coil
fitting (solution recommended for flexible stock handling)
With coils having plug-in pins EN 175301-803,
without connectors
With coils having AMP Junior connector, and with bi-directional diode.
Protection class: IP 65 with female connector properly fitted (see drawing).
With coils having DEUTSCH DT 04-2P connector, and with bi-directional diode.
Protection class: IP 69 K with female connector properly fitted (see drawing).
With coils having bi-directional diode and bipolar
sheathed free lead, 350 mm long, without pins.
182-09: Standard.
182-LED-T-A1: with LED monitoring
presence of voltage.
182-09-G-DO-2-1: with VDR (Voltage
Dependent Resistor), to prevent input
voltage over-shootings.
Mat. No. Description
R933002885 182-09 GRAY
R933002889 182-09 BLACK
R933002893 182-LED-T-A1 12 DC
R933002894 182-LED-T-A1 24 DC
R933002896 182-LED-T-A1 48 DC
R933002897 182-LED-T-A1 110 DC
R933002886 182-09-G-DO-2-1 12DC with VDR
R933002887 182-09-G-DO-2-1 24DC with VDR
With coils having Horizontal AMP Junior connector, and with bi-directional diode.
Protection class: IP 65 with female connector properly fitted (see drawing).
03
703
VS70 RE 18302-01/12.098/8 Bosch Rexroth Oil Control S.p.A.
Bosch Rexroth Oil Control S.p.A.Oleodinamica LC DivisionVia Artigianale Sedrio, 1242030 Vezzano sul CrostoloReggio Emilia - ItalyTel. +39 0522 601 801Fax +39 0522 606 226 / 601 [email protected]
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It may
not be reproduced or given to third parties without its consent.
The data specified above only serve to describe the product. No statements
concerning a certain condition or suitability for a certain application can be
derived from our information. The information given does not release the user
from the obligation of own judgment and verification. It must be remembered that
our products are subject to a natural process of wear and aging.
Subject to change.704
RE 18302-02/12.09 1/8
Linear Motion andAssembly Technologies ServicePneumaticsHydraulics
Electric Drives and Controls
DVI0048
L705... (VS81-VS82-VS84-VS85)
- 3 way 2 position valve
- Directional spool valve with direct solenoid control
- Upon request, hydraulic / pneumatic pilot, or manual push and
twist control.
- Control spool operated by screwed-in solenoid, with easily
extractable coil fastened by a ring nut.
- Wet pin tube for DC coil, with push rod for mechanical
override in case of voltage shortage.
- Unrestricted 360° orientation of DC coil.
- Control spool held in normal position by return spring.
- Optional manual override (push-button or screw type).
- Connectors available: DIN 43650 – ISO 4400, AMP Junior,
DT04-2P (Deutsch), Free leads.
Size 6Series 00Maximum operating pressure 310 bar [4500 psi]Maximum flow 60 l/min [15.85 gpm]Ports G 3/8 - G 1/2 - SAE6 - SAE8
Summary General specifications
Description Page
General specifications 1
Ordering details 2
Spool variants 2
Principles of operation, cross section 3
Technical data 3
p-Qv characteristic curves 5
External dimensions and fittings 6
Electric connection 8
3/2 ways/positions flow diverters
705
VS81-82-83-85 RE 18302-02/12.092/8 Bosch Rexroth Oil Control S.p.A.
L 7 0 5 _ _ _ _ _ _ _ _ _ _ 0
3A =
3B =
3C =
C1 C2 C1 C2
3D =
3N =
P P
I E1 10 0a a
Ordering details
Spool variants
Family
Compact directional
valve
Type
Flow Diverters
Ports
G3/8 DIN 3852 = 3
G1/2 DIN 3852 = 4
9/16-18 UNF-2B (SAE6) = B
3/4-16 UNF-2B (SAE8) = C
Control type
Solenoid (coil C 48) without emergency = 11
Solenoid (coil C 48) with push-button
type emergency = 1P
Solenoid (coil C 48) with screw
type emergency = 1F
Hydraulic / pneumatic control = P1
Manual push and twist control = H1
Spool variants
3 Ways / 2 position = 3_
Electric connections
00 = Without coil
01 = With coil, without connector
02 = With coil and with non-assembled connector,
type DIN 43650 – ISO 4400
03 = With coil having AMP Junior connector
07 = With coil having DEUTSCH DT 04-2P connect.
31 = With coil and bipolar sheathed lead 350mm
[13.8”] long
Voltage supply
SG = Manual push and twist control
00 = Without coil
OB = 12V DC
AD = 13V DC
OC = 24V DC
AC = 27V DC
OD = 48V DC
31 07 03 02 01 00
Available
connections
Drain type
I = Internal drain
E = External drain
706
RE 18302-02/12.09 VS81-82-83-85 Bosch Rexroth Oil Control S.p.A. 3/8
7 6 5 2 1 3 4
C1 P C2
Principles of operation, cross section
A valve basically consists of a housing (1), a control spool (2),
a return spring (3) and a solenoid (5). It is designed to select
which one of two circuits (C1 or C2) is to be supplied with the
oil delivered from one single hose (P): with spool in position
“0”, when the solenoid is de-energized, the flow goes from P to
C1, with spool in position “1”, when the solenoid is energized
the flow goes from P to C2.
With the coil de-energized, the return spring (3) pushes back
the spool (2) and holds it in position “0”.
The coil (5) is fastened to the tube by the ring nut (6).
The manual override (7) allows to shift the spool (2) also in
case of voltage shortage.
An external drain, to be connected to tank, ensures shifting
operations also at higher working pressure.
Hydraulic / pneumatic pilot control, or manual push and twist
control for spool shifting are available upon request.
Technical Data (for applications with different specifications consult us)
General
Valve weight kg [lbs] 2.06 [4.54]
Ambient Temperature °C [°F] –20....+50 [-4....+122] (NBR seals)
Hydraulic
Maximum pressure with external drain bar [psi] 310 [4500]
Maximum pressure with internal drain bar [psi] 250 [3625]
Maximum flow l/min [gpm] 60 [15.85]
Hydraulic fluid
General properties: it must have physical lubricating and chemical properties suitable for use in hydraulic systems such as, for example:
Mineral oil based hydraulic fluids HL (DIN 51524 part 1).
Mineral oil based hydraulic fluids HLP (DIN 51524 part 2). For use of environmentally acceptable fluids (vegetable or polyglycol base)
please consult us.
Fluid Temperature °C [°F] –20....+80 [-4....+176] (NBR seals)
Permissible degree of fluid contamination
ISO 4572: x 75 X=12...15
ISO 4406: classe 20/18/15
NAS 1638: classe 9
Viscosity range mm2/s 5....420
Internal leakage with 100 bar [1450 psi] secondary pressure at C
cc/min [in3/min] min.10 [0.61] max. 20 [1.2]
03
707
VS81-82-83-85 RE 18302-02/12.094/8 Bosch Rexroth Oil Control S.p.A.
1) Nominal - 2) ± 7% at temperature 20°C [68°F]
Electrical
Voltage type DC
Voltage tolerance (nominal voltage) % -10 .... +10
Duty W 36
Maximum coil temperature % Continuous, with ambient temperature 50°C [122°F]
Insulation class °C [°F] 150 [302]
Compliance with H
Coil weight with DIN 43650 – ISO 4400 connector Low Voltage Directive LVD 73/23/EC (2006/95/EC), 2004/108/EC
Voltage kg [lbs] 0.215 [0.44]
Voltage type V 12 13 24 27 48
Power consumption DC DC DC DC DC
Current (1) W 36 36 36 36 36
Resistance (2) A 3.0 2.77 1.53 1.32 0.75
Resistenza (2) 3.97 4.68 15.67 20.42 63.60
Voltage (V) Connector type Coil description Marking Coil Mat no.
=OB 01
=OB 0212 DC
EN 175301-803
(Ex. DIN 43650)C4801 12DC 12 DC R933000063
=OB 03 12 DC AMP JUNIOR C4803 12DC 12 DC R933000065
=OB 07 12 DC DEUTSCH DT 04-2P C4807 12DC 12 DC R933000068
=OB 31 12 DC Cable 350 mm long C4831 12DC 12 DC R933000064
=AD 01
=AD 0213 DC
EN 175301-803
(Ex. DIN 43650)C4801 13DC 13 DC R933000069
=AD 07 13 DC DEUTSCH DT 04-2P C4807 13DC 13 DC R933000073
=OC 01
=OC 0224 DC
EN 175301-803
(Ex. DIN 43650)C4801 24DC 24 DC R933000076
=OC 03 24 DC AMP JUNIOR C4803 24DC 24 DC R933000071
=OC 07 24 DC DEUTSCH DT 04-2P C4807 24DC 24 DC R933000075
=OC 31 24 DC Cable 350 mm long C4831 24DC 24 DC R933000070
=AC 01
=AC 0227 DC
EN 175301-803
(Ex. DIN 43650)C4801 27DC 27 DC R933000077
=AC 07 27 DC DEUTSCH DT 04-2P C4807 27DC 27 DC R933000074
=OD 01
=OD 0248 DC
EN 175301-803
(Ex. DIN 43650)C4801 48DC 48 DC R933000078
708
RE 18302-02/12.09 VS81-82-83-85 Bosch Rexroth Oil Control S.p.A. 5/8
PR
ES
SU
RE
-p
FLOW-Q
PR
ES
SU
RE
-p
1 2
0 15 30 45 60 l/min
bar
7
6
5
4
3
2
1
0
0 3 6 9 12 15 15.9 gpm
psi
100
75
50
25
0
1 2bar
350
300
200
100
0
psi
5000
4000
3000
2000
1000
0
FLOW-Q
0 15 30 45 60 l/min
0 3 6 9 12 15 15.9 gpm
Characteristic curves
Measured with hydraulic fluid ISO-VG32 at 45° ± 5° C [113° ± 9° F]; ambient temperature 20° C [68° F].
Performances limits
The performance limits refer to the following conditions: coils at operating temperature, voltage supply 10% below
nominal, no back pressure in the tank line.
Modello N° Curva
VS81/84 1
VS82/85 2
Curve n. Drain type
1 External (-E-)
2 Internal (-I-)
03
709
VS81-82-83-85 RE 18302-02/12.096/8 Bosch Rexroth Oil Control S.p.A.
External Dimensions and Fittings
1 Solenoid tube hex 17 mm. Torque 22-24 Nm [16.2-17.7 ft-lb].
2 Plug for version with external drain hex 24 mm.
Torque 22-24 Nm [16.2-17.7 ft-lb].
3 Ring nut for coil locking OD 26.5 mm [1.04 in].Torque 5-6Nm [3.6-4.4 ft-lb ].
4 Two through holes for installation.
Recommended screws M6 with strength class DIN 8.8.
Torque 9-10 Nm [6.6-7.4 ft-lb].
5 Ports P, C1, C2: G 3/8, G 1/2, SAE 6, SAE 8.
6 External drain and hydraulic, or pneumatic pilot port G 1/4,
SAE 4.
7 Optional push-button type emergency for spool opening: it is
pressure stuck to the ring nut for coil locking.
Mat no. R933000043.
8 Optional screw type emergency for spool opening: it is
screwed (torque 6-7Nm [4.4-5.2 ft-lb]) to the tube as
replacement of the coil ring nut. Mat no. R933007215.
9 Dimensions of optional manual version, push and twist type.
Hex 25mm, torque 22-24 Nm [16.2-17.7 ft-lb].
10 Plug for version with internal drain hex 24 mm.
Torque 22-24 Nm [16.2-17.7 ft-lb].
11 Minimum clearance needed for connector removal.
12 Identification label.
13 Hydraulic, or pneumatic pilot connector: hex 30 mm.
Torque 25-27 Nm [18.4-19.9 ft-lb].
710
RE 18302-02/12.09 VS81-82-83-85 Bosch Rexroth Oil Control S.p.A. 7/8
=00 =01
=02
=03 =07
=31
Electric connection
With coils and with connectors non-assembled, type EN 175301-803.
Protection class: IP 65 when connector with seal is properly screwed down, and cable clamp is correctly tightened.
Without coils, but with ring nut and O-Rings for coil
fitting (solution recommended for flexible stock handling)
With coils having plug-in pins EN 175301-803,
without connectors
With coils having AMP Junior connector, and with bi-directional diode.
Protection class: IP 65 with female connector properly fitted (see drawing).
With coils having DEUTSCH DT 04-2P connector, and with bi-directional diode.
Protection class: IP 69 K with female connector properly fitted (see drawing).
With coils having bi-directional diode and bipolar
sheathed free lead, 350 mm long, without pins.
182-09: Standard.
182-LED-T-A1: with LED monitoring
presence of voltage.
182-09-G-DO-2-1: with VDR (Voltage
Dependent Resistor), to prevent input
voltage over-shootings.
Mat. No. Description
R933002885 182-09 GRAY
R933002889 182-09 BLACK
R933002893 182-LED-T-A1 12 DC
R933002894 182-LED-T-A1 24 DC
R933002896 182-LED-T-A1 48 DC
R933002886 182-09-G-DO-2-1 12DC with VDR
R933002887 182-09-G-DO-2-1 24DC with VDR
03
711
VS81-82-83-85 RE 18302-02/12.098/8 Bosch Rexroth Oil Control S.p.A.
Bosch Rexroth Oil Control S.p.A.Oleodinamica LC DivisionVia Artigianale Sedrio, 1242030 Vezzano sul CrostoloReggio Emilia - ItalyTel. +39 0522 601 801Fax +39 0522 606 226 / 601 [email protected]
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It may
not be reproduced or given to third parties without its consent.
The data specified above only serve to describe the product. No statements
concerning a certain condition or suitability for a certain application can be
derived from our information. The information given does not release the user
from the obligation of own judgment and verification. It must be remembered that
our products are subject to a natural process of wear and aging.
Subject to change.712
RE 18302-03/12.09 1/8
Linear Motion andAssembly Technologies ServicePneumaticsHydraulics
Electric Drives and Controls
DVI0084
L706... (VS91-VS92-VS95)
- 3 way 2 position valve.
- Directional spool valve with direct solenoid control.
- Upon request, hydraulic / pneumatic pilot , or manual push and
twist control.
- Control spool operated by screwed-in solenoid, with easily
extractable coil fastened by a ring nut.
- Wet pin tube for DC coil, with push rod for mechanical
override in case of voltage shortage.
- Unrestricted 360° orientation of DC coil.
- Control spool held in normal position by return spring.
- Optional manual override (push-button or screw type).
- Connectors available: DIN 43650 – ISO 4400, AMP Junior,
DT04-2P (Deutsch), Free leads.
Summary General specifications
Description Page
General specifications 1
Ordering details 2
Spool variants 2
Principles of operation, cross section 3
Technical data 3
p-Qv characteristic curves 5
External dimensions and fittings 6
Electric connection 8
Size 12Series 00Maximum operating pressure 310 bar [4500 psi]Maximum flow 140 l/min [36.98 gpm]Ports G 1/2 - G 3/4 - SAE12
3/2 ways/positions flow diverters
713
VS91-92-95 RE 18302-03/12.092/8 Bosch Rexroth Oil Control S.p.A.
L 7 0 6 _ _ _ _ _ _ _ _ _ _ 0
3A =
3B =
3N =
C1 C2 C1 C2
3C =
3D =
P P
I E1 10 0a a
Ordering details
Spool variants
Family
Compact directional
valve
Type
Flow Diverters
Ports
G1/2 DIN 3852 = 4
G3/4 DIN 3852 = 5
1 1/16”-12 UN-2B (SAE12) = E
Control type
Solenoid (coil C 65) without emergency = 14
Solenoid (coil C 65) with push-button
type emergency = 4P
Solenoid (coil C 65) with screw
type emergency = 4F
Hydraulic / pneumatic control = P1
Manual push and twist control = H1
Spool variants
3 Ways / 2 position = 3_
Drain type
Internal drain = I
External drain = E
Electric connections
00 = Without coil
01 = With coil, without connector
02 = With coil and with non-assembled connector,
type DIN 43650 – ISO 4400
03 = With coil having AMP Junior connector
07 = With coil having DEUTSCH DT 04-2P connect.
31 = With coil and bipolar sheathed lead 350mm
[13.8”] long
Voltage supply
SG = Manual push and twist control
00 = Without coil
OB = 12V DC
AD = 13V DC
OC = 24V DC
AC = 27V DC
OD = 48V DC
31 07 03 02 01 00
Available
connections
714
RE 18302-03/12.09 VS91-92-95 Bosch Rexroth Oil Control S.p.A. 3/8
7 6 5 2 1 3 4
C1 P C2
Principles of operation, cross section
A valve basically consists of a housing (1), a control spool (2),
a return spring (3) and a solenoid (5). It is designed to select
which one of two circuits (C1 or C2) is to be supplied with the
oil delivered from one single hose (P): with spool in position
“0”, when the solenoid is de-energized, the flow goes from P to
C1, with spool in position “1”, when the solenoid is energized
the flow goes from P to C2.
With the coil de-energized, the return spring (3) pushes back
the spool (2) and holds it in position “0”.
The coil (5) is fastened to the tube by the ring nut (6).
The manual override (7) allows to shift the spool (2) also in
case of voltage shortage.
An external drain, to be connected to tank, ensures shifting
operations also at higher working pressure.
Hydraulic / pneumatic pilot control, or manual push and twist
control for spool shifting are available upon request.
Technical Data (for applications with different specifications consult us)
General
Valve weight kg [lbs] 3.8 [8.4]
Ambient Temperature °C [°F] –20....+50 [-4....+122] (NBR seals)
Hydraulic
Maximum pressure with external drain bar [psi] 310 [4500]
Maximum pressure with internal drain bar [psi] 250 [3625]
Maximum inlet flow l/min [gpm] 140 [36.98]
Hydraulic fluid
General properties: it must have physical lubricating and chemical properties suitable for use in hydraulic systems such as, for example:
Mineral oil based hydraulic fluids HL (DIN 51524 part 1).
Mineral oil based hydraulic fluids HLP (DIN 51524 part 2). For use of environmentally acceptable fluids (vegetable or polyglycol base)
please consult us.
Fluid Temperature °C [°F] –20....+80 [-4....+176] (NBR seals)
Permissible degree of fluid contamination
ISO 4572: x 75 X=12...15
ISO 4406: class 20/18/15
NAS 1638: class 9
Viscosity range mm2/s 5....420
Internal leakage with 100 bar [1450 psi] secondary pressure at C
cc/min [in3/min] min.15 [0.9] max. 40 [2.4]
03
715
VS91-92-95 RE 18302-03/12.094/8 Bosch Rexroth Oil Control S.p.A.
1) Nominal - 2) ± 7% at temperature 20°C [68°F]
Electrical
Voltage type DC
Voltage tolerance (nominal voltage) % -10 .... +10
Duty % Continuous, with ambient temperature 50°C [122°F]
Maximum coil temperature °C [°F] 150 [302]
Insulation class H
Compliance with Low Voltage Directive LVD 73/23/EC (2006/95/EC), 2004/108/EC
Coil weight with DIN 43650 – ISO 4400 connector kg [lbs] 1.05 [2.3]
Voltage V 12 13 24 27 48
Voltage type DC DC DC DC DC
Power consumption W 44 44 44 44 44
Current (1) A 3.6 3.4 1.8 1.60 0.90
Resistance (2) 3.2 3.6 12.8 16.9 50.5
Voltage (V) Connector type Coil description Marking Coil Mat no.
=OB 01
=OB 0212 DC
EN 175301-803
(Ex. DIN 43650)C6501 12DC 12 DC R933000100
=OB 03 12 DC AMP JUNIOR C6503 12DC 12 DC R933000119
=OB 07 12 DC DEUTSCH DT 04-2P C6507 12DC 12 DC R933000107
=OB 31 12 DC Cable 350 mm long C6531 12DC 12 DC R933000104
=AD 01
=AD 0213 DC
EN 175301-803
(Ex. DIN 43650)C6501 13DC 13 DC R933000101
=AD 07 13 DC DEUTSCH DT 04-2P C6507 13DC 13 DC R933000112
=OC 01
=OC 0224 DC
EN 175301-803
(Ex. DIN 43650)C6501 24DC 24 DC R933000102
=OC 03 24 DC AMP JUNIOR C6503 24DC 24 DC R933000120
=OC 07 24 DC DEUTSCH DT 04-2P C6507 24DC 24 DC R933000111
=OC 31 24 DC Cable 350 mm long C6531 24DC 24 DC R933000110
=AC 01
=AC 0227 DC
EN 175301-803
(Ex. DIN 43650)C6501 27DC 27 DC R933000103
=AC 03 27 DC AMP JUNIOR C6503 27DC 27 DC R93307055
=AC 07 27 DC DEUTSCH DT 04-2P C6507 27DC 27 DC R933000113
=OD 01
=OD 0248 DC
EN 175301-803
(Ex. DIN 43650)C6501 48DC 48 DC R933000114
716
RE 18302-03/12.09 VS91-92-95 Bosch Rexroth Oil Control S.p.A. 5/8
8
7
6
5
4
3
2
1
00 20 40 60 80 100 120 140 l/min
0 5 10 15 20 25 30 35 37 gpm
115
100
75
50
25
0
barpsi
PR
ES
SU
RE
-p
FLOW-Q
350
300
250
200
150
100
50
0
5000
4000
3000
2000
1000
0
barpsi
PR
ES
SU
RE
-p
1 2
1
2
0 20 40 60 80 100 120 140 l/min
0 5 10 15 20 25 30 35 37 gpmFLOW-Q
350
300
250
200
150
100
50
0
5000
4000
3000
2000
1000
0
barpsi
PR
ES
SU
RE
-p
1
2
0 20 40 60 80 100 120 140 l/min
0 5 10 15 20 25 30 35 37 gpmFLOW-Q
Characteristic curves
Measured with hydraulic fluid ISO-VG32 at 45° ± 5° C [113° ± 9° F]; ambient temperature 20° C [68° F].
Flow Diverters Curve n.
V91 1
VS92/95 2
D.I. performance limits
The performance limits refer to the following conditions: coils at operating temperature, voltage supply 10% below
nominal, no back pressure in the tank line
D.E. performance limits
The performance limits refer to the following conditions: coils at operating temperature, voltage supply 10% below
nominal, no back pressure in the tank line
Flow Diverters Curve n.
V91 1
VS92/95 2
Flow Diverters Curve n.
V91 1
VS92/95 2
03
717
VS91-92-95 RE 18302-03/12.096/8 Bosch Rexroth Oil Control S.p.A.
External Dimensions and Fittings
1 Solenoid tube hex 22 mm.
Torque 25-27 Nm [18.4-19.9 ft-lb].
2 Plug for version with external drain hex 22 mm.
Torque 25-27 Nm [18.4-19.9 ft-lb].
3 Ring nut for coil locking OD 34 mm [1.35 in].
Torque 7-8 Nm [5.2-5.9 ft-lb].
4 Two through holes for installation. Recommended screws
M8 with strength class DIN 8.8.
Torque 15-16 Nm [11-11.8 ft-lb].
5 Ports P, C1, C2: G 1/2, G 3/4, SAE 12.
6 External drain plug hex 27 mm.
Torque 25-27 Nm [18,4-19,9 ft-lb].
7 Minimum clearance needed for connector removal.
8 Identification label.
718
RE 18302-03/12.09 VS91-92-95 Bosch Rexroth Oil Control S.p.A. 7/8
External Dimensions and Fittings
9 Optional manual version, push and twist type. (Hex 25 mm)
torque 25-27 Nm [18.4-19.9 ft-lb].
10 Optional push-button type emergency for spool opening: it
is pressure stuck to the ring nut for coil locking.
Mat no. R933003424
11 Optional screw type emergency, F tupe, for spool opening:
it is screwed (torque 8-9 Nm [5.9-6.6 ft-lb]) to the tube as
replacement of the coil ring nut. Mat no. R933003713
12 External drain port G 1/4, SAE 4.
13 Optional hydraulic / pneumatic piloted version.
Pilot port plug available with G 1/4 or SAE4.
Hex 32 mm, torque 25 – 27 Nm [18.4 – 19.9 ft-lb].
03
719
VS91-92-95 RE 18302-03/12.098/8 Bosch Rexroth Oil Control S.p.A.
Bosch Rexroth Oil Control S.p.A.Oleodinamica LC DivisionVia Artigianale Sedrio, 1242030 Vezzano sul CrostoloReggio Emilia - ItalyTel. +39 0522 601 801Fax +39 0522 606 226 / 601 [email protected]
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It may
not be reproduced or given to third parties without its consent.
The data specified above only serve to describe the product. No statements
concerning a certain condition or suitability for a certain application can be
derived from our information. The information given does not release the user
from the obligation of own judgment and verification. It must be remembered that
our products are subject to a natural process of wear and aging.
Subject to change.
=00 =01
=02
=03 =07
=31
Electric connection
With coils and with connectors non-assembled, type EN 175301-803.
Protection class: IP 65 when connector with seal is properly screwed down, and cable clamp is correctly tightened.
Without coils, but with ring nut and O-Rings for coil
fitting (solution recommended for flexible stock handling)
With coils having plug-in pins EN 175301-803,
without connectors
With coils having AMP Junior connector, and with bi-directional diode.
Protection class: IP 65 with female connector properly fitted (see drawing).
With coils having DEUTSCH DT 04-2P connector, and with bi-directional diode.
Protection class: IP 69 K with female connector properly fitted (see drawing).
With coils having bi-directional diode and bipolar
sheathed free lead, 350 mm long, without pins.
182-09: Standard.
182-LED-T-A1: with LED monitoring
presence of voltage.
182-09-G-DO-2-1: with VDR (Voltage
Dependent Resistor), to prevent input
voltage over-shootings.
Mat. No. Description
R933002885 182-09 GRAY
R933002889 182-09 BLACK
R933002893 182-LED-T-A1 12 DC
R933002894 182-LED-T-A1 24 DC
R933002896 182-LED-T-A1 48 DC
R933002886 182-09-G-DO-2-1 12DC with VDR
R933002887 182-09-G-DO-2-1 24DC with VDR
720
Bosch Rexroth Oil Control S.p.A.RE 90005-04/04.10
6/2 ways/positions fl ow diverters, 6 to10/2 ways/positions fl ow diverters
VS120VS125 VS129
4G 1/4SAE 4JIS B 1/4
310 [4500] 25 [6.6] 18302-04 723
6/2 ways/positions fl ow divertersVS151VS152VS155
6G 3/8G 1/2SAE 8
310 [4500] 60 [15.9] 18302-05 731
6/2 ways/positions fl ow diverters with ports C1, C2, C3 and C4 single side
VS161VS165
6G 3/8SAE 8
310 [4500] 60 [15.9] 18302-06 739
6/2 ways/positions fl ow divertersVS311VS312VS315
10G 1/2G 3/4SAE 12
310 [4500] 140 [37] 18302-07 747
6/2 ways/positions piloted fl owdiverters - Size 16
VS400 16 G 1 310 [4500] 220 [58.1] 18302-11 755
Flow diverters6/2 ways/positions
The latest information on products can also be found on Bosch Rexroth web-site:www.boschrexroth.com
pmax Qmax Designation Type Size Interface bar l/min Data sheet Page [psi] [gpm]
03
721
Bosch Rexroth Oil Control S.p.A.RE 90005-04/04.10
722
RE 18302-04/12.09 1/8
Linear Motion andAssembly Technologies ServicePneumaticsHydraulics
Electric Drives and Controls
DVI0083
6/2 ways/positions flow diverters, 6 to10/2 ways/positions flow diverters
L710... (VS120-VS125-VS129)
- 6 way 2 position valve.
- Directional spool valve with direct solenoid control.
- Upon request, hydraulic / pneumatic pilot.
- Control spool operated by screwed-in solenoid, with easily
extractable coil fastened by a ring nut.
- Wet pin tube for DC coil, with push rod for mechanical
override in case of voltage shortage.
- Unrestricted 360° orientation of DC coil.
- Control spool held in normal position by return spring.
- Optional manual override (push-button or screw type).
- Connectors available: DIN 43650 – ISO 4400, AMP Junior,
DT04-2P (Deutsch), Free leads.
Size 4Series 00Maximum operating pressure 310 bar [4500 psi]Maximum flow 25 l/min [6.6 gpm]Ports G 1/4 - SAE4 - JIS B 1/4
Summary General specifications
Description Page
General specifications 1
Ordering details 2
Spool variants 2
Principles of operation, cross section 3
Technical data 3
p-Qv characteristic curves 5
External dimensions and fittings 6
Electric connection 9
723
VS120/125/129 RE 18302-04/12.092/8 Bosch Rexroth Oil Control S.p.A.
6A 7A
C1 C4 C1 C4
L 7 1 0 _ _ _ _ _ _ _ _ _ _ 0
6E 7E
C2
C3
C2
C3
P1 P2 P1 P2
1 10 0a aI E
Ordering details
Spool variants
Family
Compact directional
valve
Type
Flow Diverters
Ports
G 1/4 DIN3852 = 2
9/16-18 UNF2-B (SAE6) = A
JIS B G 1/4 = J
Control type
Solenoid (coil C36) without
emergency = 10
Solenoid (coil C36) with
push-button type emergency = 1P
Solenoid (coil C36) with
screw type emergency = 1F
Hydraulic / pneumatic control = P1
Spool Variants
6 way / 2 position P1 side = 6_
6 way / 2 position P2 side = 7_
Drain type
Internal drain = I
External drain = E
Electric connections
00 = Without coil
01 = With coil, without connector
02 = With coil and with non-assembled connector,
type DIN 43650 – ISO 4400
03 = With coil having AMP Junior connector
04 = With coil having AMP Junior Horiz. connector
07 = With coil having DEUTSCH DT 04-2P connect.
31 = With coil and bipolar sheathed lead 350mm
[13.8”] long
Voltage supply
00 = Without coil
OB = 12V DC
AD = 13V DC
OC = 24V DC
AC = 27V DC
OD = 48V DC
OE = 110V DC
31 07 04 03 02 01 00
Available connections
724
RE 18302-04/12.09 VS120/125/129 Bosch Rexroth Oil Control S.p.A. 3/8
5 6 4 1 2 3
C1 P1 C2 C4 P2 C3
Principles of operation, cross section
A valve basically consists of a housing (1), a control spool (2), a
return spring (3) and a solenoid (4). It is designed to connect
two inlet lines P1 – P2 (normally a set of hoses) and divert
them to either the outlet ports (C1 – C4) with spool in position
“0”, when the solenoid is de-energized, or to the outlet ports
(C2 – C3) with spool in position “1”, when the solenoid is
energized.
With the coil de-energized, the return spring (3) pushes back
the spool (2) and holds it in position “0”
The coil (4) is fastened to the tube by the ring nut (6).
The manual override (6) allows to shift the spool (2) also in
case of voltage shortage.
Hydraulic / pneumatic pilot control for spool shifting is available
upon request.
Technical Data (for applications with different specifications consult us)
General
Valve weight kg [lbs] 1.13 [2.5]
Mounting position unrestricted
Ambient Temperature °C [°F] –20....+50 [-4....+122] (NBR seals)
Hydraulic
Maximum pressure with external drain bar [psi] 310 [4500]
Maximum pressure with internal drain bar [psi] 250 [3625]
Maximum inlet flow l/min [gpm] 25 [6.6]
Hydraulic fluid
General properties: it must have physical lubricating and chemical properties suitable for use in hydraulic systems such as, for example:
Mineral oil based hydraulic fluids HL (DIN 51524 part 1).
Mineral oil based hydraulic fluids HLP (DIN 51524 part 2). For use of environmentally acceptable fluids (vegetable or polyglycol base)
please consult us.
Fluid Temperature °C [°F] –20....+80 [-4....+176] (NBR seals)
Permissible degree of fluid contamination
ISO 4572: x 75 X=12...15
ISO 4406: class 20/18/15
NAS 1638: class 9
Viscosity range mm2/s 5....420
Internal leakage with 100 bar [1450 psi] secondary pressure at C
cc/min [in3/min] min.7 [0.43] max. 15 [0.74]
03
725
VS120/125/129 RE 18302-04/12.094/8 Bosch Rexroth Oil Control S.p.A.
Electrical
Voltage type DC
Voltage tolerance (nominal voltage) % -10 .... +10
Duty Continuous, with ambient temperature 50°C [122°F]
Maximum coil temperature °C [°F] 150 [302]
Insulation class H
Compliance with Low Voltage Directive LVD 73/23/EC (2006/95/EC), 2004/108/EC
Coil weight with connection EN 175301-803 kg [lbs] 0.215 [0.44]
Voltage V 12 13 24 27 48 110
Voltage type DC DC DC DC DC DC
Power consumption W 26 26 26 26 26 26
Current (1) A 2.15 2.00 1.10 1.00 0.54 0.27
Resistance (2) 5.5 6.5 22 28 89 413
1) Nominal - 2) ± 7% at temperature 20°C [68°F]
Voltage (V) Connector type Coil description Marking Coil Mat no.
=OB 01
=OB 0212 DC
EN 175301-803
(Ex. DIN 43650)C3601 12DC 12 DC R933000044
=OB 03 12 DC AMP JUNIOR C3603 12DC 12 DC R933000047
=OB 04 12 DC AMP JUNIOR Horizontal C3604 12DC 12 DC R933002913
=OB 07 12 DC DEUTSCH DT 04-2P C3607 12DC 12 DC R933000048
=OB 31 12 DC Cable 350 mm long C3631 12DC 12 DC R933000045
=AD 01
=AD 0213 DC
EN 175301-803
(Ex. DIN 43650)C3601 13DC 13 DC R933000051
=AD 07 13 DC DEUTSCH DT 04-2P C3607 13DC 13 DC R933000049
=OC 01
=OC 0224 DC
EN 175301-803
(Ex. DIN 43650)C3601 24DC 24 DC R933000053
=OC 03 24 DC AMP JUNIOR C3603 24DC 24 DC R933000057
=OC 04 24 DC AMP JUNIOR Horizontal C3604 24DC 24 DC R933002914
=OC 07 24 DC DEUTSCH DT 04-2P C3607 24DC 24 DC R933000058
=OC 31 24 DC Cable 350 mm long C3637 24DC 24 DC R933000055
=AC 01
=AC 0227 DC
EN 175301-803
(Ex. DIN 43650)C3601 27DC 27 DC R933000056
=AC 07 27 DC DEUTSCH DT 04-2P C3607 27DC 27 DC R933000050
=OD 01
=OD 0248 DC
EN 175301-803
(Ex. DIN 43650)C3601 48DC 48 DC R933000059
=OD 04 48 DC AMP JUNIOR Horizontal C3604 48DC 48 DC R933002915
=OE 01
=OE 02110 DC
EN 175301-803
(Ex. DIN 43650)C3601 110DC 110 DC R933000061
726
RE 18302-04/12.09 VS120/125/129 Bosch Rexroth Oil Control S.p.A. 5/8
15
12
9
6
3
00 5 10 15 20 25 l/min
0 1.5 3 4.5 6 6.6 gpm
260250
200
150
100
50
0
barpsi
PR
ES
SU
RE
-p
FLOW-Q
310
250
200
150
100
50
0
45004000
3000
2000
1000
0
barpsi
PR
ES
SU
RE
-p
1
1 2
0 5 10 15 20 25 l/min
0 1.5 3 4.5 6 6.6 gpmFLOW-Q
Characteristic curves
Measured with hydraulic fluid ISO-VG32 at 45° ± 5° C [113° ± 9° F]; ambient temperature 20° C [68° F].
Flow path Curve No.
P1>C1 1
P1>C2 1
P2>C3 1
P2>C4 1
Drain type Curve No.
External (-E-) 1
Internal (-I-) 2
DI-DE performance limits
The performance limits refer to the following conditions: coils at operating temperature, voltage supply 10% below
nominal, no back pressure in the tank line.
Flow across both ways: forward across P1>C1 and
reverse across C4>P2
03
727
VS120/125/129 RE 18302-04/12.096/8 Bosch Rexroth Oil Control S.p.A.
External Dimensions and Fittings
1 Solenoid tube hex 22 mm.
Torque 20-22Nm [14.6-16.2 ft-lb].
2 Ring nut for coil locking OD 20.5 mm [1.04 in].Torque 3-4 Nm [2.2-3.0 ft-lb].
3 Optional hydraulic / pneumatic piloted version.
Pilot port plug available with G 1/4: hex 30 mm.
Torque 20 – 22 Nm [14.7 – 16.2 ft-lb].
4 Identification label.
5 Minimum clearance needed for connector removal.
6 Optional push-button, EP type, emergency for spool
opening: it is pressure stuck to the ring nut for coil locking.
Mat no. R933000042.
7 Optional screw, EF type, emergency for spool opening: it
is screwed (torque 6-7 Nm [4.4-5.5 ft-lb]) to the tube as
replacement of the coil ring nut. Mat no. R933000021.
8 Ports P1, P2, C1, C2, C3, C4.
9 External drain plug available with G 1/4 and SAE 4 port.
Hex 22mm, torque 20-22 Nm [14.7-16.2 ft-lb].
10 Two fixation holes Use M5 screws with strength class DIN
8.8. Torque 5-6 Nm [3.6-4.4 ft-lb].
Measure VS120 (G1/4) VS125 (SAE 4)
A mm [inch] 17.5 [0.69] 16.5 [0.65]
B mm [inch] 23 [0.91] 22.5 [0.89]
C mm [inch] 8.5 [0.33] 7.5 [0.30]
D mm [inch] 17.5 [0.69] 18.5 [0.73]
728
RE 18302-04/12.09 VS120/125/129 Bosch Rexroth Oil Control S.p.A. 7/8
External Dimensions and Fittings
1 Solenoid tube hex 22 mm.
Torque 20-22Nm [14.6-16.2 ft-lb].
2 Ring nut for coil locking OD 20.5 mm [1.04 in].
Torque 3-4 Nm [2.2-3.0 ft-lb].
3 Identification label.
4 Two fixation holes M8.
5 Minimum clearance needed for connector removal.
6 Optional push-button, EP type, emergency for spool
opening: it is pressure stuck to the ring nut for coil locking.
Mat no. R933000042
7 Optional screw, EF type, emergency for spool opening: it
is screwed (torque 6-7 Nm [4.4-5.5 ft-lb]) to the tube as
replacement of the coil ring nut.
Mat no. R933000021.
8 Ports P1, P2, C1, C2, C3, C4.
03
729
VS120/125/129 RE 18302-04/12.098/8 Bosch Rexroth Oil Control S.p.A.
Bosch Rexroth Oil Control S.p.A.Oleodinamica LC DivisionVia Artigianale Sedrio, 1242030 Vezzano sul CrostoloReggio Emilia - ItalyTel. +39 0522 601 801Fax +39 0522 606 226 / 601 [email protected]
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It may
not be reproduced or given to third parties without its consent.
The data specified above only serve to describe the product. No statements
concerning a certain condition or suitability for a certain application can be
derived from our information. The information given does not release the user
from the obligation of own judgment and verification. It must be remembered that
our products are subject to a natural process of wear and aging.
Subject to change.
=00 =01
=02
=03
=07=31
=04
Electric connection
With coils and with connectors non-assembled, type EN 175301-803.
Protection class: IP 65 when connector with seal is properly screwed down, and cable clamp is correctly tightened.
Without coils, but with ring nut and O-Rings for coil
fitting (solution recommended for flexible stock handling)
With coils having plug-in pins EN 175301-803,
without connectors
With coils having AMP Junior connector, and with bi-directional diode.
Protection class: IP 65 with female connector properly fitted (see drawing).
With coils having DEUTSCH DT 04-2P connector, and with bi-directional diode.
Protection class: IP 69 K with female connector properly fitted (see drawing).
With coils having bi-directional diode and bipolar
sheathed free lead, 350 mm long, without pins.
182-09: Standard.
182-LED-T-A1: with LED monitoring
presence of voltage.
182-09-G-DO-2-1: with VDR (Voltage
Dependent Resistor), to prevent input
voltage over-shootings.
Mat. No. Description
R933002885 182-09 GRAY
R933002889 182-09 BLACK
R933002893 182-LED-T-A1 12 DC
R933002894 182-LED-T-A1 24 DC
R933002896 182-LED-T-A1 48 DC
R933002897 182-LED-T-A1 110 DC
R933002886 182-09-G-DO-2-1 12DC with VDR
R933002887 182-09-G-DO-2-1 24DC with VDR
With coils having Horizontal AMP Junior connector, and with bi-directional diode.
Protection class: IP 65 with female connector properly fitted (see drawing).
730
RE 18302-05/12.09 1/8
Linear Motion andAssembly Technologies ServicePneumaticsHydraulics
Electric Drives and Controls
DVI0082
6/2 ways/positions flow diverters
L721.... (VS151-VS152-VS155)
- 6 way 2 position valve.
- Directional spool valve with direct solenoid control.
- Upon request, hydraulic / pneumatic pilot , or manual push and
twist control.
- Usable as stand-alone, or as multiple stackable units
- Control spool operated by screwed-in solenoid, with easily
extractable coil fastened by a ring nut.
- Wet pin tube for DC coil, with push rod for mechanical
override in case of voltage shortage.
- Unrestricted 360° orientation of DC coil.
- Control spool held in normal position by return spring.
- Optional manual override (push-button or screw type).
- Connectors available: DIN 43650 – ISO 4400, AMP Junior,
DT04-2P (Deutsch), Free leads.
Size 6Series 01Maximum operating pressure 310 bar [4500 psi]Maximum flow 60 l/min [15.85 gpm]Ports G 3/8 - G 1/2 - SAE8
Summary General specifications
Description Page
General specifications 1
Ordering details 2
Spool variants 2
Principles of operation, cross section 3
Technical data 3
p-Qv characteristic curves 5
External dimensions and fittings 6
Electric connection 8
731
VS151-VS152-VS155 RE 18302-05/12.092/8 Bosch Rexroth Oil Control S.p.A.
6B
Ia
C1 C4
6E
L 7 2 1 _ _ _ _ _ _ _ _ _ _ 0
E
P1 P2
1 0
C2
C3
a
C1 C4
P1 P2
1 0
C2
C3
6A
6G
6F
Ordering details
Spool variants
Family
Compact directional
valve
Type
Flow Diverters
Ports
G 3/8 DIN 3852 = 3
G 1/2 DIN 3852 = 4
3/4-16 UNF (SAE8) = C
Control type
Solenoid (coil C 48) without emergency = 11
Solenoid (coil C 48) with push-button
type emergency = 1P
Solenoid (coil C 48) with screw
type emergency = 1F
Hydraulic / pneumatic control = P1
Manual push and twist control = H1
Spool Variants
6 way / 2 position P1 side = 6_
Electric connections
00 = Without coil
01 = With coil, without connector
02 = With coil and with non-assembled connector,
type DIN 43650 – ISO 4400
03 = With coil having AMP Junior connector
07 = With coil having DEUTSCH DT 04-2P connect.
31 = With coil and bipolar sheathed lead 350mm
[13.8”] long
Voltage supply
SG = Manual push and twist control
00 = Without coil
OB = 12V DC
AD = 13V DC
OC = 24V DC
AC = 27V DC
OD = 48V DC
31 07 03 02 01 00
Available
connections
Drain type
I = Internal drain
E = External drain
732
RE 18302-05/12.09 VS151-VS152VS-VS155 Bosch Rexroth Oil Control S.p.A. 3/8
6 5 4 1 2 3
C1 P1 C2 C4 P2 C3
Principles of operation, cross section
A valve basically consists of a housing (1), a control spool (2), a
return spring (3) and a solenoid (5). It is designed to connect
two inlet lines P1 – P2 (normally a set of hoses) and divert
them to either the outlet ports (C1 – C4) with spool in position
“0”, when the solenoid is de-energized, or to the outlet ports
(C2 – C3) with spool in position “1”, when the solenoid is
energized.
With the coil de-energized, the return spring (3) pushes back
the spool (2) and holds it in position “0”.
The coil (5) is fastened to the tube by the ring nut (6).
The manual override (6) allows to shift the spool (2) also in
case of voltage shortage.
An external drain, to be connected to tank, ensures shifting
operations also at higher working pressure.
Hydraulic / pneumatic pilot control, or manual push and twist
control for spool shifting are available upon request.
Technical Data (for applications with different specifications consult us)
General
Valve weight kg [lbs] 2.85 [6.29]
Mounting position unrestricted
Ambient Temperature °C [°F] –20....+50 [-4....+122] (NBR seals)
Hydraulic
Maximum pressure with external drain bar [psi] 310 [4500]
Maximum pressure with internal drain bar [psi] 250 [3625]
Maximum pressure with internal drain and
6F or 6G scheme bar [psi] 310 [4500]
Maximum flow l/min [gpm] 60 [15.85]
Hydraulic fluid
General properties: it must have physical lubricating and chemical properties suitable for use in hydraulic systems such as, for example:
Mineral oil based hydraulic fluids HL (DIN 51524 part 1).
Mineral oil based hydraulic fluids HLP (DIN 51524 part 2). For use of environmentally acceptable fluids (vegetable or polyglycol base)
please consult us.
Fluid Temperature °C [°F] –20....+80 [-4....+176] (NBR seals)
Permissible degree of fluid contamination
ISO 4572: x 75 X=12...15
ISO 4406: classe 20/18/15
NAS 1638: classe 9
Viscosity range mm2/s 5....420
Internal leakage with 100 bar [1450 psi] secondary pressure at C
cc/min [in3/min] min. 10 [0.61] - max. 20 [1.2]
03
733
VS151-VS152-VS155 RE 18302-05/12.094/8 Bosch Rexroth Oil Control S.p.A.
Electrical
Voltage type DC
Voltage tolerance (nominal voltage) % -10 .... +10
Duty % Continuous, with ambient temperature 50°C [122°F]
Maximum coil temperature °C [°F] 150 [302]
Insulation class H
Compliance with Low Voltage Directive LVD 73/23/EC (2006/95/EC), 2004/108/EC
Coil weight with DIN 43650 – ISO 4400 connector kg [lbs] 0.5 [1.1]
Voltage V 12 13 24 27 48
Voltage type DC DC DC DC DC
Power consumption W 36 36 36 36 36
Current (1) A 3.0 2.77 1.53 1.32 0.75
Resistance (2) 3.97 4.68 15.67 20.42 63.60
1) Nominal - 2) ± 7% at temperature 20°C [68°F]
Voltage (V) Connector type Coil description Marking Coil Mat no.
=OB 01
=OB 0212 DC
EN 175301-803
(Ex. DIN 43650)C4801 12DC 12 DC R933000063
=OB 03 12 DC AMP JUNIOR C4803 12DC 12 DC R933000065
=OB 07 12 DC DEUTSCH DT 04-2P C4807 12DC 12 DC R933000068
=OB 31 12 DC Cable 350 mm long C4831 12DC 12 DC R933000064
=AD 01
=AD 0213 DC
EN 175301-803
(Ex. DIN 43650)C4801 13DC 13 DC R933000069
=AD 07 13 DC DEUTSCH DT 04-2P C4807 13DC 13 DC R933000073
=OC 01
=OC 0224 DC
EN 175301-803
(Ex. DIN 43650)C4801 24DC 24 DC R933000076
=OC 03 24 DC AMP JUNIOR C4803 24DC 24 DC R933000071
=OC 07 24 DC DEUTSCH DT 04-2P C4807 24DC 24 DC R933000075
=OC 31 24 DC Cable 350 mm long C4831 24DC 24 DC R933000070
=AC 01
=AC 0227 DC
EN 175301-803
(Ex. DIN 43650)C4801 27DC 27 DC R933000077
=AC 07 27 DC DEUTSCH DT 04-2P C4807 27DC 27 DC R933000074
=OD 01 48 DC DIN EN 175301-803 ISO 4400 C4801 48DC 48 DC R933000078
734
RE 18302-05/12.09 VS151-VS152VS-VS155 Bosch Rexroth Oil Control S.p.A. 5/8
9
8
7
6
5
4
3
2
1
00 10 20 30 40 50 60 l/min
0 3 6 9 12 15 15.8 gpm
130125
100
75
50
25
0
barpsi
PR
ES
SU
RE
-p
FLOW-Q
350
300
250
200
150
100
50
0
5000
4000
3000
2000
1000
0
barpsi
PR
ES
SU
RE
-p
3
2
1
2
1
0 10 20 30 40 50 60 l/min
0 3 6 9 12 15 15.8 gpmFLOW-Q
350
300
250
200
150
100
50
0
5000
4000
3000
2000
1000
0
barpsi
PR
ES
SU
RE
-p
2
1
0 10 20 30 40 50 60 l/min
0 3 6 9 12 15 15.8 gpmFLOW-Q
Characteristic curves
Measured with hydraulic fluid ISO-VG32 at 45° ± 5° C [113° ± 9° F]; ambient temperature 20° C [68° F].
DI performance limits
The performance limits refer to the following conditions: coils at operating temperature, voltage supply 10% below
nominal, no back pressure in the tank line.
Flow diverterCurve n.
P1>C1 P1>C2 C4> P2 C3>P2
VS151-G3/8 1 1 1 1
VS152-G1/2 2 2 3 3
VS155-SAE8 2 2 3 3
Measured with port G1/2 DIN 3852
DE performance limits
The performance limits refer to the following conditions: coils at operating temperature, voltage supply 10% below
nominal, no back pressure in the tank line.
Flow across both ways: forward across P1>C1 and
reverse across C4>P2
Flow across both ways: forward across P1>C1 and
reverse across C4>P2
Flow diverter Curve n.
VS151 1
VS152 - VS 155 2
Flow diverter Curve n.
VS151 1
VS152 - VS 155 2
03
735
VS151-VS152-VS155 RE 18302-05/12.096/8 Bosch Rexroth Oil Control S.p.A.
External Dimensions and Fittings
1 Ports P1, P2, C1, C2, C3, C4.
2 Two fixation screws M6x40 with strength class DIN 8.8.
Torque 9-10 Nm [14.7 – 16.2 ft-lb].
3 Ring nut for coil locking OD 26.5 mm [1.04 in].
Torque 6-7 Nm [4.4-5.2 ft-lb].
4 Solenoid tube hex 17 mm.
Torque 22-24 Nm [16.2 – 17.7 ft-lb].
5 Minimum clearance needed for connector removal.
6 External drain plug available with G 1/4 and SAE 4 port.
Hex.24 Torque 22-24 Nm [16.2 – 17.7 ft-lb].
7 Identification label.
8 Overall dimensions with 6F and 6G spools.
736
RE 18302-05/12.09 VS151-VS152VS-VS155 Bosch Rexroth Oil Control S.p.A. 7/8
9 Optional push-button, P type, emergency for spool opening:
it is pressure stuck to the ring nut for coil locking.
Mat no. R933000043.
10 Optional screw type emergency, F type, for spool opening:
it is screwed (torque 6-7Nm [4.4-5.2 ft-lb]) to the tube as
replacement of the coil ring nut. (Mat no. R933007215)
11 Dimensions of optional manual version, push and twist
type. Hex 25 mm, torque 20-22 Nm [16.2-17.7 ft-lb].
12 Dimensions of optional hydraulic / pneumatic piloted ver-
sion. Pilot port plug available with G 1/4: hex 30 mm, torque
25-27 Nm [18.4-19.9 ft-lb].
External Dimensions and Fittings
03
737
VS151-VS152-VS155 RE 18302-05/12.098/8 Bosch Rexroth Oil Control S.p.A.
Bosch Rexroth Oil Control S.p.A.Oleodinamica LC DivisionVia Artigianale Sedrio, 1242030 Vezzano sul CrostoloReggio Emilia - ItalyTel. +39 0522 601 801Fax +39 0522 606 226 / 601 [email protected]
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It may
not be reproduced or given to third parties without its consent.
The data specified above only serve to describe the product. No statements
concerning a certain condition or suitability for a certain application can be
derived from our information. The information given does not release the user
from the obligation of own judgment and verification. It must be remembered that
our products are subject to a natural process of wear and aging.
Subject to change.
=00 =01
=02
=03 =07
=31
Electric connection
With coils and with connectors non-assembled, type EN 175301-803.
Protection class: IP 65 when connector with seal is properly screwed down, and cable clamp is correctly tightened.
Without coils, but with ring nut and O-Rings for coil
fitting (solution recommended for flexible stock handling)
With coils having plug-in pins EN 175301-803,
without connectors
With coils having AMP Junior connector, and with bi-directional diode.
Protection class: IP 65 with female connector properly fitted (see drawing).
With coils having DEUTSCH DT 04-2P connector, and with bi-directional diode.
Protection class: IP 69 K with female connector properly fitted (see drawing).
With coils having bi-directional diode and bipolar
sheathed free lead, 350 mm long, without pins.
182-09: Standard.
182-LED-T-A1: with LED monitoring
presence of voltage.
182-09-G-DO-2-1: with VDR (Voltage
Dependent Resistor), to prevent input
voltage over-shootings.
Mat. No. Description
R933002885 182-09 GRAY
R933002889 182-09 BLACK
R933002893 182-LED-T-A1 12 DC
R933002894 182-LED-T-A1 24 DC
R933002896 182-LED-T-A1 48 DC
R933002886 182-09-G-DO-2-1 12DC with VDR
R933002887 182-09-G-DO-2-1 24DC with VDR
738
RE 18302-06/12.09 1/8
Linear Motion andAssembly Technologies ServicePneumaticsHydraulics
Electric Drives and Controls
DVI0086
6/2 ways/positions flow diverters with ports C1, C2, C3 and C4 single side
L725.... (VS161-VS165)
- 6 way 2 position valve.
- Directional spool valve with direct solenoid control.
- Upon request, hydraulic / pneumatic pilot, or manual push and
twist control.
- Control spool operated by screwed-in solenoid, with easily
extractable coil fastened by a ring nut.
- Wet pin tube for DC coil, with push rod for mechanical
override in case of voltage shortage.
- Unrestricted 360° orientation of DC coil.
- Control spool held in normal position by return spring.
- Optional manual override (push-button or screw type).
- Connectors available: DIN 43650 – ISO 4400, AMP Junior,
DT04-2P (Deutsch), Free leads.
Size 6Series 00Maximum operating pressure 310 bar [4500 psi]Maximum flow 60 l/min [15.85 gpm]Ports G 3/8 - SAE8
Summary General specifications
Description Page
General specifications 1
Ordering details 2
Spool variants 2
Principles of operation, cross section 3
Technical data 3
p-Qv characteristic curves 5
External dimensions and fittings 6
Electric connections 8
739
VS161-VS165 RE 18302-06/12.092/8 Bosch Rexroth Oil Control S.p.A.
6B 6G
Ia
C1 C4 C1 C4
6E
L 7 2 5 _ _ _ _ _ _ _ _ _ _ 0
E
P1 P2
1 0 a
P1 P2
1 0
6A 6F
C2 C3 C2 C3
Ordering details
Spool variants
Family
Compact directional
valve
Type
Flow Diverters
Ports
G 3/8 DIN 3852 = 3
3/4” - 16 UNF (SAE8) = C
Control type
Solenoid (coil C48) without emerg. = 11
Solenoid (coil C48) with
push-button type emergency = 1P
Solenoid (coil C48) with
screw type emergency = 1F
Hydraulic/pneumatic pilot = P1
Manual push and twist control = H1
Spool variants
6 way / 2 position P1 side = 6_
Electric connections
00 = Without coil
01 = With coil, without connector
02 = With coil and with non-assembled connector,
type DIN 43650 – ISO 4400
03 = With coil having AMP Junior connector
07 = With coil having DEUTSCH DT 04-2P connect.
31 = With coil and bipolar sheathed lead 350mm
[13.8”] long
Voltage supply
SG = Manual push and twist control
00 = Without coil
OB = 12V DC
AD = 13V DC
OC = 24V DC
AC = 27V DC
OD = 48V DC
31 07 03 02 01 00
Available
connections
Drain type
I = Internal drain
E = External drain
740
RE 18302-06/12.09 VS161-VS165 Bosch Rexroth Oil Control S.p.A. 3/8
6 5 4 1 2 3
C1 P1 C2 C4 P2 C3
Principles of operation, cross section
A valve basically consists of a housing (1), a control spool (2),
a return spring (3) and a solenoid (5). It is designed to connect
two inlet lines P1 – P2 (normally a set of hoses) and divert
them to either the outlet ports (C1 – C4) with spool in position
“0”, when the solenoid is de-energized, or to the outlet ports
(C2 – C3) with spool in position “1”, when the solenoid is
energized.
With the coil de-energized, the return spring (3) pushes back
the spool (2) and holds it in position “0”
The coil (4) is fastened to the tube by the ring nut (5).
The manual override (6) allows to shift the spool (2) also in
case of voltage shortage.
An external drain, to be connected to tank, ensures shifting
operations also at higher working pressure.
Hydraulic / pneumatic pilot control, or manual push and twist
control for spool shifting are available upon request.
Technical Data (for applications with different specifications consult us)
Generali
Valve weight kg [lbs] 3.0 [6.6]
Mounting position unrestricted
Ambient Temperature °C [°F] –20....+50 [-4....+122] (NBR seals)
Hydraulic
Maximum pressure with external drain bar [psi] 310 [4500]
Maximum pressure with internal drain bar [psi] 250 [3625]
Maximum pressure with internal drain
and 6F or 6G scheme bar [psi] 310 [4500]
Maximum inlet flow l/min [gpm] 60 [15,85]
Hydraulic fluid
General properties: it must have physical lubricating and chemical properties suitable for use in hydraulic systems such as, for example:
Mineral oil based hydraulic fluids HL (DIN 51524 part 1).
Mineral oil based hydraulic fluids HLP (DIN 51524 part 2). For use of environmentally acceptable fluids (vegetable or polyglycol base)
please consult us.
Fluid Temperature °C [°F] –20....+80 [-4....+176] (NBR seals)
Permissible degree of fluid contamination
ISO 4572: x 75 X=12...15
ISO 4406: classe 20/18/15
NAS 1638: classe 9
Viscosity range mm2/s 5....420
Internal leakage with 100 bar [1450 psi] secondary pressure at C
cc/min [in3/min] min. 10 [0.61] max. 20 [1.2]
03
741
VS161-VS165 RE 18302-06/12.094/8 Bosch Rexroth Oil Control S.p.A.
1) Nominal - 2) ± 7% at temperature 20°C [68°F]
Electrical
Voltage type DC
Voltage tolerance (nominal voltage) % -10 .... +10
Duty % Continuous, with ambient temperature 50°C [122°F]
Maximum coil temperature °C [°F] 150 [302]
Insulation class H
Compliance with Low Voltage Directive LVD 73/23/EC (2006/95/EC), 2004/108/EC
Coil weight with DIN 43650 – ISO 4400 connector kg [lbs] 0.5 [1.1]
Voltage V 12 13 24 27 48
Voltage type DC DC DC DC DC
Power consumption W 36 36 36 36 36
Current (1) A 3.0 2.77 1.53 1.32 0.75
Resistance (2) 3.97 4.68 15.67 20.42 63.60
Voltage (V) Connector type Coil description Marking Coil Mat no.
=OB 01
=OB 0212 DC
EN 175301-803
(Ex. DIN 43650)C4801 12DC 12 DC R933000063
=OB 03 12 DC AMP JUNIOR C4803 12DC 12 DC R933000065
=OB 07 12 DC DEUTSCH DT 04-2P C4807 12DC 12 DC R933000068
=OB 31 12 DC Cable 350 mm long C4831 12DC 12 DC R933000064
=AD 01
=AD 0213 DC
EN 175301-803
(Ex. DIN 43650)C4801 13DC 13 DC R933000069
=AD 07 13 DC DEUTSCH DT 04-2P C4807 13DC 13 DC R933000073
=OC 01
=OC 0224 DC
EN 175301-803
(Ex. DIN 43650)C4801 24DC 24 DC R933000076
=OC 03 24 DC AMP JUNIOR C4803 24DC 24 DC R933000071
=OC 07 24 DC DEUTSCH DT 04-2P C4807 24DC 24 DC R933000075
=OC 31 24 DC Cable 350 mm long C4831 24DC 24 DC R933000070
=AC 01
=AC 0227 DC
EN 175301-803
(Ex. DIN 43650)C4801 27DC 27 DC R933000077
=AC 07 27 DC DEUTSCH DT 04-2P C4807 27DC 27 DC R933000074
=OD 01 48 DC DIN EN 175301-803 ISO 4400 C4801 48DC 48 DC R933000078
742
RE 18302-06/12.09 VS161-VS165 Bosch Rexroth Oil Control S.p.A. 5/8
1 2
0 10 20 30 40 50 60 l/min
0 10 20 30 40 50 60 l/min
bar
7
6
5
4
3
2
1
0
0 3 6 9 12 15 15.8 gpm
0 3 6 9 12 15 15.8 gpm
psi
200
150
100
50
0
D.E.
bar
350
300
200
100
0
psi
5000
4000
3000
2000
1000
0
PR
ES
SU
RE
-p
FLOW-Q
FLOW-Q
PR
ES
SU
RE
-p
D.I.
1
2
Characteristic curves
Measured with hydraulic fluid ISO-VG32 at 45° ± 5° C [113° ± 9° F]; ambient temperature 20° C [68° F].
Performances limits
The performance limits refer to the following conditions: coils at operating temperature, voltage supply 10% below
nominal, no back pressure in the tank line.
Flow path Curve n.
P1>C1 P1>C2 P2>C4 P2>C3
VS161 1 1 1 1
VS165 2 2 2 2
Flow diverter Curve n.
VS161 1
VS165 2
Flow across both ways: forward across P1>C1 and
reverse across C4>P2
03
743
VS161-VS165 RE 18302-06/12.096/8 Bosch Rexroth Oil Control S.p.A.
External Dimensions and Fittings
1 Ports P1, P2, C1, C2, C3, C4.
2 The mounting surface flatness must comply with
specifications.
3 Two fixation screws M8x70 with strength class DIN 8.8.
Torque 15 – 16 Nm [11.1-11.8 ft-lb].
4 Ring nut for coil locking OD 26.5 mm [1.04 in].
Torque 5-6 Nm [3.6-4.4 ft-lb].
5 Solenoid tube hex 17 mm.
Torque 22-24 Nm [16.2 – 17.7 ft-lb].
6 Minimum clearance needed for connector removal.
7 External drain plug available with G 1/4 and SAE 4 port.
Hex.24 Torque 22-24 Nm [16.2 – 17.7 ft-lb].
8 Identification label.
744
RE 18302-06/12.09 VS161-VS165 Bosch Rexroth Oil Control S.p.A. 7/8
9 Optional push-button, P type, emergency for spool opening:
it is pressure stuck to the ring nut for coil locking.
Mat no. R933000043
10 Optional screw type emergency, F type, for spool opening:
it is screwed (torque 6-7Nm [4.4-5.2 ft-lb]) to the tube as
replacement of the coil ring nut. (Mat no. R933007215)
11 Dimensions of optional manual version, push and twist
type. Hex 25 mm, torque 20-22 Nm [16.2-17.7 ft-lb].
12 Dimensions of optional hydraulic / pneumatic piloted
version. Pilot port plug available with G 1/4: hex 30 mm,
torque 25-27 Nm [18.4-19.9 ft-lb].
External Dimensions and Fittings
03
745
VS161-VS165 RE 18302-06/12.098/8 Bosch Rexroth Oil Control S.p.A.
Bosch Rexroth Oil Control S.p.A.Oleodinamica LC DivisionVia Artigianale Sedrio, 1242030 Vezzano sul CrostoloReggio Emilia - ItalyTel. +39 0522 601 801Fax +39 0522 606 226 / 601 [email protected]
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It may
not be reproduced or given to third parties without its consent.
The data specified above only serve to describe the product. No statements
concerning a certain condition or suitability for a certain application can be
derived from our information. The information given does not release the user
from the obligation of own judgment and verification. It must be remembered that
our products are subject to a natural process of wear and aging.
Subject to change.
=00 =01
=02
=03 =07
=31
Electric connection
With coils and with connectors non-assembled, type EN 175301-803.
Protection class: IP 65 when connector with seal is properly screwed down, and cable clamp is correctly tightened.
Without coils, but with ring nut and O-Rings for coil
fitting (solution recommended for flexible stock handling)
With coils having plug-in pins EN 175301-803,
without connectors
With coils having AMP Junior connector, and with bi-directional diode.
Protection class: IP 65 with female connector properly fitted (see drawing).
With coils having DEUTSCH DT 04-2P connector, and with bi-directional diode.
Protection class: IP 69 K with female connector properly fitted (see drawing).
With coils having bi-directional diode and bipolar
sheathed free lead, 350 mm long, without pins.
182-09: Standard.
182-LED-T-A1: with LED monitoring
presence of voltage.
182-09-G-DO-2-1: with VDR (Voltage
Dependent Resistor), to prevent input
voltage over-shootings.
Mat. No. Description
R933002885 182-09 GRAY
R933002889 182-09 BLACK
R933002893 182-LED-T-A1 12 DC
R933002894 182-LED-T-A1 24 DC
R933002896 182-LED-T-A1 48 DC
R933002886 182-09-G-DO-2-1 12DC with VDR
R933002887 182-09-G-DO-2-1 24DC with VDR
746
RE 18302-07/12.09 1/8
Linear Motion andAssembly Technologies ServicePneumaticsHydraulics
Electric Drives and Controls
DVI0088
6/2 ways/positions flow diverters
L753.... (VS311-VS312-VS315)
- 6 way 2 position valve.
- Directional spool valve with direct solenoid control.
- Upon request, hydraulic / pneumatic pilot , or manual push and
twist control.
- Control spool operated by screwed-in solenoid, with easily
extractable coil fastened by a ring nut.
- Wet pin tube for DC coil, with push rod for mechanical
override in case of voltage shortage.
- Unrestricted 360° orientation of DC coil.
- Control spool held in normal position by return spring.
- Optional manual override (push-button or screw type).
- Connectors available: DIN 43650 – ISO 4400, AMP Junior,
DT04-2P (Deutsch), Free leads.
Size 10Series 00Maximum operating pressure 310 bar [4500 psi]Maximum flow 140 l/min [36,98 gpm]Ports G 1/2 -G 3/4 - SAE12
Summary General specifications
Description Page
General specifications 1
Ordering details 2
Spool variants 2
Principles of operation, cross section 3
Technical data 3
p-Qv characteristic curves 5
External dimensions and fittings 6
Electric connection 8
747
VS311-312-315 RE 18302-07/12.092/8 Bosch Rexroth Oil Control S.p.A.
6B 6G
I E
a a
C1 C4 C1 C4
6E
L 7 5 3 _ _ _ _ _ _ _ _ _ _ 0
P1 P2 P1 P2
1 0 1 0
C2
C3
C2
C3
6A 6F
Ordering details
Spool variants
Family
Compact directional
valve
Type
Flow Diverters
Ports
G 1/2 DIN 3852 = 4
G 3/4 DIN 3852 = 5
1 1/16-12 UN (SAE12) = E
Control type
Solenoid (coil C 65) without emergency = 14
Solenoid (coil C 65) with push-button
type emergency = 4P
Solenoid (coil C 65) with screw
type emergency = 4F
Hydraulic / pneumatic control = P1
Manual push and twist control = H1
Spool variants
6 way / 2 position P1 side = 6_
Drain type
Internal drain = I
External drain = E
Electric connections
00 = Without coil
01 = With coil, without connector
02 = With coil and with non-assembled connector,
type DIN 43650 – ISO 4400
03 = With coil having AMP Junior connector
07 = With coil having DEUTSCH DT 04-2P connect.
31 = With coil and bipolar sheathed lead 350mm
[13.8”] long
Voltage supply
00 = Without coil
OB = 12V DC
AD = 13V DC
OC = 24V DC
AC = 27V DC
OD = 48V DC
31 07 03 02 01 00
Available
connections
748
RE 18302-07/12.09 VS311-312-315 Bosch Rexroth Oil Control S.p.A. 3/8
6 5 4 1 2 3
C1 P1 C2 C4 P2 C3
Principles of operation, cross section
A valve basically consists of a housing (1), a control spool (2), a
return spring (3) and a solenoid (5). It is designed to connect
two inlet lines P1 – P2 (normally a set of hoses) and divert
them to either the outlet ports (C1 – C4) with spool in position
“0”, when the solenoid is de-energized, or to the outlet ports
(C2 – C3) with spool in position “1”, when the solenoid is
energized.
With the coil de-energized, the return spring (3) pushes back
the spool (2) and holds it in position “0”
The coil (5) is fastened to the tube by the ring nut (6).
The manual override (6) allows to shift the spool (2) also in
case of voltage shortage.
An external drain, to be connected to tank, ensures shifting
operations also at higher working pressure.
Hydraulic / pneumatic pilot control for spool shifting is available
upon request.
Technical Data (for applications with different specifications consult us)
General
Valve weight kg [lbs] 5.1 [11.2]
Mounting position unrestricted
Ambient Temperature °C [°F] –20....+50 [-4....+122] (NBR seals)
Hydraulic
Maximum pressure with external drain bar [psi] 310 [4500]
Maximum pressure with internal drain bar [psi] 250 [3625]
Maximum pressure with schemes 6F and 6G bar [psi] 310 [4500]
Maximum flow l/min [gpm] 140 [36.98]
Pilot pressure needed for hydraulic / pneu-
matic controlbar [psi]
max 200 [2900] - min 4 [58] with external drain.For versions with internal drain, the pilot pressure required should be at least 11
times higher than inlet pressure (ratio 11:1).
Hydraulic fluid
General properties: it must have physical lubricating and chemical properties suitable for use in hydraulic systems such as, for example:
Mineral oil based hydraulic fluids HL (DIN 51524 part 1).
Mineral oil based hydraulic fluids HLP (DIN 51524 part 2). For use of environmentally acceptable fluids (vegetable or polyglycol base)
please consult us.
Fluid Temperature °C [°F] –20....+80 [-4....+176] (NBR seals)
Permissible degree of fluid contamination
ISO 4572: x 75 X=12...15
ISO 4406: class 20/18/15
NAS 1638: class 9
Viscosity range mm2/s 5....420
Internal leakage with 100 bar [1450 psi] secondary pressure at C
cc/min [in3/min] min. 15 [0.9] - max. 40 [2.4]
03
749
VS311-312-315 RE 18302-07/12.094/8 Bosch Rexroth Oil Control S.p.A.
1) Nominal - 2) ± 7% at temperature 20°C [68°F]
Electrical
Voltage type DC
Voltage tolerance (nominal voltage) % -10 .... +10
Duty % Continuous, with ambient temperature 50°C [122°F]
Maximum coil temperature °C [°F] 150 [302]
Insulation class H
Compliance with Low Voltage Directive LVD 73/23/EC (2006/95/EC), 2004/108/EC
Coil weight with DIN 43650 – ISO 4400 connector kg [lbs] 1.05 [2.3]
Voltage V 12 13 24 27 48
Voltage type DC DC DC DC DC
Power consumption W 44 44 44 44 44
Current (1) A 3.6 3.4 1.8 1.60 0.90
Resistance (2) 3.2 3.6 12.8 16.9 50.5
Voltage (V) Connector type Coil description Marking Coil Mat no.
=OB 01
=OB 0212 DC
EN 175301-803
(Ex. DIN 43650)C6501 12DC 12 DC R933000100
=OB 03 12 DC AMP JUNIOR C6503 12DC 12 DC R933000119
=OB 07 12 DC DEUTSCH DT 04-2P C6507 12DC 12 DC R933000107
=OB 31 12 DC Cable 350 mm long C6531 12DC 12 DC R933000104
=AD 01
=AD 0213 DC
EN 175301-803
(Ex. DIN 43650)C6501 13DC 13 DC R933000101
=AD 07 13 DC DEUTSCH DT 04-2P C6507 13DC 13 DC R933000112
=OC 01
=OC 0224 DC
EN 175301-803
(Ex. DIN 43650)C6501 24DC 24 DC R933000102
=OC 03 24 DC AMP JUNIOR C6503 24DC 24 DC R933000120
=OC 07 24 DC DEUTSCH DT 04-2P C6507 24DC 24 DC R933000111
=OC 31 24 DC Cable 350 mm long C6531 24DC 24 DC R933000110
=AC 01
=AC 0227 DC
EN 175301-803
(Ex. DIN 43650)C6501 27DC 27 DC R933000103
=AC 03 27 DC AMP JUNIOR C6503 27DC 27 DC R93307055
=AC 07 27 DC DEUTSCH DT 04-2P C6507 27DC 27 DC R933000113
=OD 01
=OD 0248 DC
EN 175301-803
(Ex. DIN 43650)C6501 48DC 48 DC R933000114
750
RE 18302-07/12.09 VS311-312-315 Bosch Rexroth Oil Control S.p.A. 5/8
2 1
0 20 40 60 80 100 120 140 l/min
0 20 40 60 80 100 120 140 l/min
bar
8
7
6
5
4
3
2
1
0
0 5 10 15 20 25 30 35 37 gpm
0 5 10 15 20 25 30 35 37 gpm
psi
115
100
75
50
25
0
bar
350
300
200
100
0
psi
5000
4000
3000
2000
1000
0
PR
ES
SU
RE
-p
FLOW-Q
FLOW-Q
PR
ES
SU
RE
-p
D.E D.I
1
2
Characteristic curves
Measured with hydraulic fluid ISO-VG32 at 45° ± 5° C [113° ± 9° F]; ambient temperature 20° C [68° F].
Performances limits
The performance limits refer to the following conditions: coils at operating temperature, voltage supply 10% below
nominal, no back pressure in the tank line.
SchemeCurve n.
P1>C1 P1>C2 P2>C4 P2>C3
VS311 2 2 2 2
VS312-VS315 1 1 1 1
Scheme Curve n.
VS311 1
VS312-VS315 2
Flow across both ways: forward across P1>C1 and
reverse across C4>P2
03
751
VS311-312-315 RE 18302-07/12.096/8 Bosch Rexroth Oil Control S.p.A.
External Dimensions and Fittings
1 Ports P1, P2, C1, C2, C3, C4.
2 The mounting surface flatness must comply with
specifications.
3 Two fixation screws M8x45 with strength class DIN 8.8.
Torque 15 – 16 Nm [11.1 – 11.8 ft-lb].
4 Ring nut for coil locking OD 34 mm [1.34 in].
Torque 7–8 Nm [5.2 – 5.9 ft-lb ].
5 Solenoid tube hex 22 mm.
Torque 25 – 27 Nm [18.4 – 19.9 ft-lb].
6 Minimum clearance needed for connector removal.
7 External drain plug available with G 1/4 and SAE 4 port.
Hex. 27 mm. Torque 25 – 27 Nm [18.4 – 19.9 ft-lb].
8 Identification label.
752
RE 18302-07/12.09 VS311-312-315 Bosch Rexroth Oil Control S.p.A. 7/8
9 Optional push-button, P type, emergency for spool opening:
it is pressure stuck to the ring nut for coil locking.
Mat no. R933003424
10 Optional screw type emergency, F type, for spool opening:
it is screwed (torque 8-9 Nm [5.9-6.6 ft-lb]) to the tube as
replacement of the coil ring nut. Mat no. R933003713
11 Dimensions of optional manual version, push and twist
type. Hex 25mm, torque 25 – 27 Nm [18.4 – 19.9 ft-lb].
12 Dimensions of optional hydraulic / pneumatic piloted
version. Pilot port plug available with G 1/4: hex 32 mm,
torque 25 – 27 Nm [18.4 – 19.9 ft-lb].
External Dimensions and Fittings
03
753
VS311-312-315 RE 18302-07/12.098/8 Bosch Rexroth Oil Control S.p.A.
Bosch Rexroth Oil Control S.p.A.Oleodinamica LC DivisionVia Artigianale Sedrio, 1242030 Vezzano sul CrostoloReggio Emilia - ItalyTel. +39 0522 601 801Fax +39 0522 606 226 / 601 [email protected]
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It may
not be reproduced or given to third parties without its consent.
The data specified above only serve to describe the product. No statements
concerning a certain condition or suitability for a certain application can be
derived from our information. The information given does not release the user
from the obligation of own judgment and verification. It must be remembered that
our products are subject to a natural process of wear and aging.
Subject to change.
=00 =01
=02
=03 =07
=31
Electric connection
With coils and with connectors non-assembled, type EN 175301-803.
Protection class: IP 65 when connector with seal is properly screwed down, and cable clamp is correctly tightened.
Without coils, but with ring nut and O-Rings for coil
fitting (solution recommended for flexible stock handling)
With coils having plug-in pins EN 175301-803,
without connectors
With coils having AMP Junior connector, and with bi-directional diode.
Protection class: IP 65 with female connector properly fitted (see drawing).
With coils having DEUTSCH DT 04-2P connector, and with bi-directional diode.
Protection class: IP 69 K with female connector properly fitted (see drawing).
With coils having bi-directional diode and bipolar
sheathed free lead, 350 mm long, without pins.
182-09: Standard.
182-LED-T-A1: with LED monitoring
presence of voltage.
182-09-G-DO-2-1: with VDR (Voltage
Dependent Resistor), to prevent input
voltage over-shootings.
Mat. No. Description
R933002885 182-09 GRAY
R933002889 182-09 BLACK
R933002893 182-LED-T-A1 12 DC
R933002894 182-LED-T-A1 24 DC
R933002896 182-LED-T-A1 48 DC
R933002886 182-09-G-DO-2-1 12DC with VDR
R933002887 182-09-G-DO-2-1 24DC with VDR
754
RE 18302-11/12.09 1/8
Linear Motion andAssembly Technologies ServicePneumaticsHydraulics
Electric Drives and Controls
DVI0080
6/2 ways/positions piloted flow diverters - Size 16
L7556... (VS400)
- 6 way 2 position valve.
- Directional spool valve hydraulically piloted through solenoid
control.
- Solenoid with easily extractable coil fastened by a ring nut.
- Wet pin tube for DC coil, with push rod for mechanical
override in case of voltage shortage.
- Unrestricted 360° orientation of DC coil.
- Control spool held in normal position by return spring.
- Connectors available: DIN 43650 – ISO 4400, AMP Junior,
DT04-2P (Deutsch), Free leads.
Size 16Series 00Maximum operating pressure 310 bar [4500 psi]Maximum flow 220 l/min [58.1 gpm]Ports G 1
Summary General specifications
Description Page
General specifications 1
Ordering details 2
Spool variants 2
Principles of operation, cross section 3
Technical data 3
p-Qv characteristic curves 5
External dimensions and fittings 6
Electric connection 8
755
L 7 5 5 6 _ _ 6 B _ _ _ _ _ 0
= 2
= 4
1 =
3 =
6B
C1C2 C3
C4
P2P1
DP P
P PD D
D
VS400 RE 18302-11/12.092/8 Bosch Rexroth Oil Control S.p.A.
Ordering details
Configuration
Family
Compact directional
valve
Type
Flow Diverters
Ports
G 1 DIN3852
Control type
Without pilot solenoid valve = 00
With pilot solenoid valve and without
mechanical detent = 10
With pilot solenoid valve and with
mechanical detent = 1D
Configuration, pilot and drain type
Internal pilot and drain = 1
External pilot and drain = 2
External pilot and internal drain = 3
External drain and internal pilot = 4
Electric connections
00 = Without coil
01 = With coil, without connector
02 = With coil and with non-assembled connector,
type DIN 43650 – ISO 4400
03 = With coil having AMP Junior connector
04 = With coil having AMP Junior horizontal
connector
07 = With coil having DEUTSCH DT 04-2P connector
31 = With coil and bipolar sheathed lead 350mm
[13.8”] long
Voltage supply
00 = Without coil
OB = 12V DC
AD = 13V DC
OC = 24V DC
AC = 27V DC
OD = 48V DC
OE = 110V DC
31 07 04 03 02 01 00
Available
connections
756
1 4 2 5 3
C3 P2 C4 C2 P1 C1
RE 18302-11/12.09 VS400 Bosch Rexroth Oil Control S.p.A. 3/8
Principles of operation, cross section
A valve basically consists of a housing (1), a control spool (2), a
return spring (4), a 4/2 solenoid valve (3), a face mounted plate
for optional drain and/or external hydraulic pilot.
The valve is designed to connect two inlet lines P1 – P2
(normally a set of hoses) and divert them to either the outlet
ports (C1 – C4) with spool in position “0”, when the solenoid
is de-energized, or to the outlet ports (C2 – C3) with spool in
position “1”, when the solenoid is energized. In fact, energizing
the solenoid valve (3), the pilot pressure, after exceeding the
18 bar (261 psi) threshold, pushes the control spool (2) from
position “0” into position “1”.
With the solenoid de-energized, the return spring (4) pushes
back the spool (2) and holds it in position “0”
The coil of the solenoid valve is fastened to the tube by a ring
nut.
Hydraulic
Maximum operating pressure with external drain bar [psi] 310 [4500]
Maximum operating pressure with internal drain bar [psi] 210 [3046]
Maximum inlet flow l/min [gpm] 220 [58.1]
Minimum pilot pressure bar [psi] 18 [261]
Internal pilot switching pressure between P1 and P2 bar [psi] 18 [261]
Hydraulic fluid
General properties: it must have physical lubricating and chemical properties suitable for use in hydraulic systems such as, for example:
Mineral oil based hydraulic fluids HL (DIN 51524 part 1).
Mineral oil based hydraulic fluids HLP (DIN 51524 part 2). For use of environmentally acceptable fluids (vegetable or polyglycol base)
please consult us.
Fluid Temperature °C [°F] –20....+80 [-4....+176] (NBR seals)
Permissible degree of fluid contamination
ISO 4572: x 75 X=12...15
ISO 4406: class 20/18/15
NAS 1638: class 9
Viscosity range mm2/s 5....420
Internal leakage with 100 bar [1450 psi] secondary pressure at C
cc/min [in3/min]
min.20 [1.2] max. 60 [3.6]
Technical Data (for applications with different specifications consult us)
General
Valve weight kg [lbs] 15.2 [33.5]
Mounting position unrestricted
Ambient Temperature °C [°F] –20....+50 [-4....+122] (NBR seals)
03
757
VS400 RE 18302-11/12.094/8 Bosch Rexroth Oil Control S.p.A.
Electrical
Voltage type DC
Voltage tolerance (nominal voltage) % -10 .... +10
Duty Continuous 100%, with ambient temperature 50°C [122°F]
Maximum coil temperature °C [°F] 150 [302]
Insulation class H
Compliance with Low Voltage Directive LVD 73/23/EC (2006/95/EC), 2004/108/EC
Coil weight with connection EN 175301-803 kg [lbs] 0.215 [0.44]
Voltage V 12 13 24 27 48 110
Voltage type DC DC DC DC DC DC
Power consumption W 26 26 26 26 26 26
Current (1) A 2.15 2.00 1.10 1.00 0.54 0.27
Resistance (2) 5.5 6.5 22 28 89 413
1) Nominal - 2) ± 7% at temperature 20°C [68°F]
Voltage (V) Connector type Coil description Marking Coil Mat no.
=OB 01
=OB 0212 DC
EN 175301-803
(Ex. DIN 43650)C3601 12DC 12 DC R933000044
=OB 03 12 DC AMP JUNIOR C3603 12DC 12 DC R933000047
=OB 04 12 DC AMP JUNIOR Horizontal C3604 12DC 12 DC R933002913
=OB 07 12 DC DEUTSCH DT 04-2P C3607 12DC 12 DC R933000048
=OB 31 12 DC Cable 350 mm long C3631 12DC 12 DC R933000045
=AD 01
=AD 0213 DC
EN 175301-803
(Ex. DIN 43650)C3601 13DC 13 DC R933000051
=AD 07 13 DC DEUTSCH DT 04-2P C3607 13DC 13 DC R933000049
=OC 01
=OC 0224 DC
EN 175301-803
(Ex. DIN 43650)C3601 24DC 24 DC R933000053
=OC 03 24 DC AMP JUNIOR C3603 24DC 24 DC R933000057
=OC 04 24 DC AMP JUNIOR Horizontal C3604 24DC 24 DC R933002914
=OC 07 24 DC DEUTSCH DT 04-2P C3607 24DC 24 DC R933000058
=OC 31 24 DC Cable 350 mm long C3637 24DC 24 DC R933000055
=AC 01
=AC 0227 DC
EN 175301-803
(Ex. DIN 43650)C3601 27DC 27 DC R933000056
=AC 07 27 DC DEUTSCH DT 04-2P C3607 27DC 27 DC R933000050
=OD 01
=OD 0248 DC
EN 175301-803
(Ex. DIN 43650)C3601 48DC 48 DC R933000059
=OD 04 48 DC AMP JUNIOR Horizontal C3604 48DC 48 DC R933002915
=OE 01
=OE 02110 DC
EN 175301-803
(Ex. DIN 43650)C3601 110DC 110 DC R933000061
758
5
4
3
2
1
00 50 100 150 200 250 l/min
0 10 20 30 40 50 60 70 gpm
70
60
50
40
30
20
10
0
barpsi
PR
ES
SU
RE
-p
FLOW-Q
310
250
200
150
100
50
00 50 100 150 200 250 l/min
0 10 20 30 40 50 60 70 gpm
4000
3000
2000
1000
0
barpsi
PR
ES
SU
RE
-p
FLOW-Q
1 2 3
RE 18302-11/12.09 VS400 Bosch Rexroth Oil Control S.p.A. 5/8
Characteristic curves
Measured with hydraulic fluid ISO-VG32 at 45° ± 5° C [113° ± 9° F]; ambient temperature 20° C [68° F].
Flow path Curve No.
P1>C1 1
P1>C2 1
P2>C3 1
P2>C4 1
1) External drain; pilot pressure 18 bar [261 psi]
2) Internal drain; pilot pressure 18 bar [261 psi]
3) External drain; pilot pressure 30 bar [435 psi]
Performances limits
The performance limits refer to the following conditions:coils at operating temperature, voltage supply 10% below
nominal, no back pressure in the tank line
03
759
P
DP2 P1
C4 C1
C3 C2
VS400 RE 18302-11/12.096/8 Bosch Rexroth Oil Control S.p.A.
External Dimensions and Fittings
1 Solenoid tube hex 22 mm. Torque 20-22 Nm [14.6-16.2 ft-lb]
2 Ring nut for coil locking OD 20.5 mm [0.80 in]. Torque 3-4 Nm [2.2-3.0 ft-lb ].
3 Identification label.
4 Four fixation screws M8 with strength class DIN 8.8.
Torque 20 – 22 Nm [14.6 – 16.2 ft-lb].
5 Minimum clearance needed for connector removal.
6 Ports P1, P2, C1, C2, C3, C4.
7 Pilot and drain ports P, D
760
=00 =01
=02
=03
=07=31
=04
RE 18302-11/12.09 VS400 Bosch Rexroth Oil Control S.p.A. 7/8
Electric connection
With coils and with connectors non-assembled, type EN 175301-803.
Protection class: IP 65 when connector with seal is properly screwed down, and cable clamp is correctly tightened.
Without coils, but with ring nut and O-Rings for coil
fitting (solution recommended for flexible stock handling)
With coils having plug-in pins EN 175301-803,
without connectors
With coils having AMP Junior connector, and with bi-directional diode.
Protection class: IP 65 with female connector properly fitted (see drawing).
With coils having DEUTSCH DT 04-2P connector, and with bi-directional diode.
Protection class: IP 69 K with female connector properly fitted (see drawing).
With coils having bi-directional diode and bipolar
sheathed free lead, 350 mm long, without pins.
182-09: Standard.
182-LED-T-A1: with LED monitoring
presence of voltage.
182-09-G-DO-2-1: with VDR (Voltage
Dependent Resistor), to prevent input
voltage over-shootings.
Mat. No. Description
R933002885 182-09 GRAY
R933002889 182-09 BLACK
R933002893 182-LED-T-A1 12 DC
R933002894 182-LED-T-A1 24 DC
R933002896 182-LED-T-A1 48 DC
R933002897 182-LED-T-A1 110 DC
R933002886 182-09-G-DO-2-1 12DC with VDR
R933002887 182-09-G-DO-2-1 24DC with VDR
With coils having Horizontal AMP Junior connector, and with bi-directional diode.
Protection class: IP 65 with female connector properly fitted (see drawing).
03
761
VS400 RE 18302-11/12.098/8 Bosch Rexroth Oil Control S.p.A.
Bosch Rexroth Oil Control S.p.A.Oleodinamica LC DivisionVia Artigianale Sedrio, 1242030 Vezzano sul CrostoloReggio Emilia - ItalyTel. +39 0522 601 801Fax +39 0522 606 226 / 601 [email protected]
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It may
not be reproduced or given to third parties without its consent.
The data specified above only serve to describe the product. No statements
concerning a certain condition or suitability for a certain application can be
derived from our information. The information given does not release the user
from the obligation of own judgment and verification. It must be remembered that
our products are subject to a natural process of wear and aging.
Subject to change.762
Bosch Rexroth Oil Control S.p.A.RE 90005-04/04.10
6 to12/2 ways/positions bankable fl ow diverters fl angeable
VS120FVS125F
4G 1/4SAE 4
310 [4500] 20 [5.3] 18302-08 765
6 to14/2 ways/positions bankable fl ow diverters fl angeable
VS241FVS245FVS246FVS247F
6G 3/8SAE 8M18x1,5
310 [4500] 50 [13.2] 18302-09 773
6 to 14/2 ways/positions bankable fl ow diverters fl angeable
VS270F 8G 3/8G 1/2SAE 10
310 [4500] 80 [21.1] 18302-12 783
6 to14 ways/positions bankable fl ow diverters fl angeable
VS281FVS285FVS286FVS287FVS289F
10
G 1/2SAE 10M18x1,5JIS B 1/2M22x1,5
310 [4500] 90 [23.8] 18302-10 791
Flow diverters6 up to 14/2 ways/positions bankable
The latest information on products can also be found on Bosch Rexroth web-site:www.boschrexroth.com
pmax Qmax Designation Type Size Interface bar l/min Data sheet Page [psi] [gpm]
03
763
Bosch Rexroth Oil Control S.p.A.RE 90005-04/04.10
764
RE 18302-08/12.09 1/10
Linear Motion andAssembly Technologies ServicePneumaticsHydraulics
Electric Drives and Controls
DVI0089
6 to 12/2 ways/positionsbankable flow diverters flangeable
L711... (VS120F-VS125F)
- 6 way 2 position valve.
- Directional spool valve with direct solenoid control.
- Upon request, hydraulic / pneumatic pilot.
- Usable as stand-alone, or as multiple stackable units.
- Control spool operated by screwed-in solenoid, with easily
extractable coil fastened by a ring nut.
- Wet pin tube for DC coil, with push rod for mechanical
override in case of voltage shortage.
- Unrestricted 360° orientation of DC coil.
- Control spool held in normal position by return spring.
- Optional manual override (push-button or screw type).
- Connectors available: DIN 43650 – ISO 4400, AMP Junior,
DT04-2P (Deutsch), Free leads.
Size 4Series 00Maximum operating pressure 310 bar [4500 psi]Maximum flow 20 l/min [5.3 gpm]Ports G 1/4 - SAE4
Summary General specifications
Description Page
General specifications 1
Ordering details 2
Spool variants 2
Principles of operation, cross section 3
Technical data 3
p-Qv characteristic curves 5
External dimensions and fittings 6
Electric connection 9
765
VS120F/125F RE 18302-08/12.092/10 Bosch Rexroth Oil Control S.p.A.
6A 7A
C1 C4 C1 C4
L 7 11 _ _ _ _ _ _ _ _ _ _ _
6E 7E
C2
C3
C2
C3
P1 P2 P1 P2
1 10 0a aI E
Ordering details
Spool variants
Family
Compact directional
valve
Type
Flow Diverters
Ports
G 1/4“ DIN3852 = 2
9/16-18 UNF2-B (SAE6) = A
Control type
Solenoid (coil C36) without
emergency = 10
Solenoid (coil C36) with
push-button type emergency = 1P
Solenoid (coil C36) with
screw type emergency = 1F
Hydraulic / pneumatic control = P1
Spool Variants
6 way / 2 position P1 side = 6_
6 way / 2 position P2 side = 7_
Drain type
Internal drain = I
External drain = E
Assembly
0 = Single diverter
2 = 2 Pre-assembled diverters
3 = 3 Pre-assembled diverters
4 = 4 Pre-assembled diverters
Electric connections
00 = Without coil
01 = With coil, without connector
02 = With coil and with non-assembled connector,
type DIN 43650 – ISO 4400
03 = With coil having AMP Junior connector
04 = With coil having AMP Junior Horiz. connector
07 = With coil having DEUTSCH DT 04-2P connect.
31 = With coil and bipolar sheathed lead 350mm
[13.8”] long
Voltage supply
00 = Without coil
OB = 12V DC
AD = 13V DC
OC = 24V DC
AC = 27V DC
OD = 48V DC
OE = 110V DC
31 07 04 03 02 01 00
Available connections
766
RE 18302-08/12.09 VS120F/125F Bosch Rexroth Oil Control S.p.A. 3/10
5 6 4 1 2 3
C1 P1 C2 C4 P2 C3
Principles of operation, cross section
A valve basically consists of a housing (1), a control spool (2), a
return spring (3) and a solenoid (4). It is designed to connect
two inlet lines P1 – P2 (normally a set of hoses) and divert
them to either the outlet ports (C1 – C4) with spool in position
“0”, when the solenoid is de-energized, or to the outlet ports
(C2 – C3) with spool in position “1”, when the solenoid is
energized.
With the coil de-energized, the return spring (3) pushes back
the spool (2) and holds it in position “0”
The coil (4) is fastened to the tube by the ring nut (6).
The manual override (5) allows to shift the spool (2) also in
case of voltage shortage.
Hydraulic / pneumatic pilot control for spool shifting is available
upon request.
Technical Data (for applications with different specifications consult us)
General
Valve weight kg [lbs] 1.13 [2.5]
Mounting position unrestricted
Ambient Temperature °C [°F] –20....+50 [-4....+122] (NBR seals)
Hydraulic
Maximum pressure with external drain bar [psi] 310 [4500]
Maximum pressure with internal drain bar [psi] 250 [3625]
Maximum inlet flow l/min [gpm] 20 [5.3]
Hydraulic fluid
General properties: it must have physical lubricating and chemical properties suitable for use in hydraulic systems such as, for example:
Mineral oil based hydraulic fluids HL (DIN 51524 part 1).
Mineral oil based hydraulic fluids HLP (DIN 51524 part 2). For use of environmentally acceptable fluids (vegetable or polyglycol base)
please consult us.
Fluid Temperature °C [°F] –20....+80 [-4....+176] (NBR seals)
Permissible degree of fluid contamination
ISO 4572: x 75 X=12...15
ISO 4406: class 20/18/15
NAS 1638: class 9
Viscosity range mm2/s 5....420
Internal leakage with 100 bar [1450 psi] secondary pressure at C
cc/min [in3/min] min.7 [0.43] max. 15 [0.74]
03
767
VS120F/125F RE 18302-08/12.094/10 Bosch Rexroth Oil Control S.p.A.
Electrical
Voltage type DC
Voltage tolerance (nominal voltage) % -10 .... +10
Duty Continuous, with ambient temperature 50°C [122°F]
Maximum coil temperature °C [°F] 150 [302]
Insulation class H
Compliance with Low Voltage Directive LVD 73/23/EC (2006/95/EC), 2004/108/EC
Coil weight with connection EN 175301-803 kg [lbs] 0.215 [0.44]
Voltage V 12 13 24 27 48 110
Voltage type DC DC DC DC DC DC
Power consumption W 26 26 26 26 26 26
Current (1) A 2.15 2.00 1.10 1.00 0.54 0.27
Resistance (2) 5.5 6.5 22 28 89 413
1) Nominal - 2) ± 7% at temperature 20°C [68°F]
Voltage (V) Connector type Coil description Marking Coil Mat no.
=OB 01
=OB 0212 DC
EN 175301-803
(Ex. DIN 43650)C3601 12DC 12 DC R933000044
=OB 03 12 DC AMP JUNIOR C3603 12DC 12 DC R933000047
=OB 04 12 DC AMP JUNIOR Horizontal C3604 12DC 12 DC R933002913
=OB 07 12 DC DEUTSCH DT 04-2P C3607 12DC 12 DC R933000048
=OB 31 12 DC Cable 350 mm long C3631 12DC 12 DC R933000045
=AD 01
=AD 0213 DC
EN 175301-803
(Ex. DIN 43650)C3601 13DC 13 DC R933000051
=AD 07 13 DC DEUTSCH DT 04-2P C3607 13DC 13 DC R933000049
=OC 01
=OC 0224 DC
EN 175301-803
(Ex. DIN 43650)C3601 24DC 24 DC R933000053
=OC 03 24 DC AMP JUNIOR C3603 24DC 24 DC R933000057
=OC 04 24 DC AMP JUNIOR Horizontal C3604 24DC 24 DC R933002914
=OC 07 24 DC DEUTSCH DT 04-2P C3607 24DC 24 DC R933000058
=OC 31 24 DC Cable 350 mm long C3637 24DC 24 DC R933000055
=AC 01
=AC 0227 DC
EN 175301-803
(Ex. DIN 43650)C3601 27DC 27 DC R933000056
=AC 07 27 DC DEUTSCH DT 04-2P C3607 27DC 27 DC R933000050
=OD 01
=OD 0248 DC
EN 175301-803
(Ex. DIN 43650)C3601 48DC 48 DC R933000059
=OD 04 48 DC AMP JUNIOR Horizontal C3604 48DC 48 DC R933002915
=OE 01
=OE 02110 DC
EN 175301-803
(Ex. DIN 43650)C3601 110DC 110 DC R933000061
768
RE 18302-08/12.09 VS120F/125F Bosch Rexroth Oil Control S.p.A. 5/10
15
12
9
6
3
00 5 10 15 20 25 l/min
0 1.5 3 4.5 6 6.6 gpm
260250
200
150
100
50
0
barpsi
PR
ES
SU
RE
-p
FLOW-Q
310
250
200
150
100
50
0
45004000
3000
2000
1000
0
barpsi
PR
ES
SU
RE
-p
1
1 2
0 5 10 15 20 25 l/min
0 1.5 3 4.5 6 6.6 gpmFLOW-Q
Characteristic curves
Measured with hydraulic fluid ISO-VG32 at 45° ± 5° C [113° ± 9° F]; ambient temperature 20° C [68° F].
Flow path Curve No.
P1>C1 1
P1>C2 1
P2>C3 1
P2>C4 1
Drain type Curve No.
External (-E-) 1
Internal (-I-) 2
DI-DE performance limits
The performance limits refer to the following conditions: coils at operating temperature, voltage supply 10% below
nominal, no back pressure in the tank line.
Flow across both ways: forward across P1>C1 and
reverse across C4>P2
03
769
VS120F/125F RE 18302-08/12.096/10 Bosch Rexroth Oil Control S.p.A.
External Dimensions and Fittings
1 Solenoid tube hex 22 mm.
Torque 20-22 Nm [14.6-16.2 ft-lb].
2 Ring nut for coil locking OD 20.5 mm [1.04 in].
Torque 3-4 Nm [2.2-3.0 ft-lb].
3 Identification label.
4 Four through holes for fixation. Use M5 screws with strength
class DIN 8.8. Torque 5-6 Nm [3.6-4.4 ft-lb].
5 External drain plug available with G 1/4 and SAE6 port.
Hex 22 mm, torque 20-22 Nm [14,7-16,2 ft-lb].
6 Ports P1, P2, (without spot-facing) C1, C2 C3, C4.
7 Dimensions of assembly with 3 units.
8 Optional push-button, EP type, emergency for spool
opening: it is pressure stuck to the ring nut for coil locking.
Mat no. R933000042.
9 Optional screw, EF type, emergency for spool opening: it is
screwed (6-7 Nm [4.4-5.5 ft-lb]) to the tube as replacement
of the coil ring nut. Mat no. R933000021.
Quota VS120-F (G1/4) VS125-F (SAE 4)
A M6 1/4” - 20 UNC
Total
stacked units
Total length
mm [inch]Total rods length
mm [inch]Torque
Nm / ft-lb
2 92 [3.62] 85 [3.34] 6 [4.4]
3 138 [5.4] 130 [5.11] 6 [4.4]
4 184 [7.2] 175 [6.88] 6 [4.4]
770
RE 18302-08/12.09 VS120F/125F Bosch Rexroth Oil Control S.p.A. 7/10
=00 =01
=02
=03
=07=31
=04
Electric connection
With coils and with connectors non-assembled, type EN 175301-803.
Protection class: IP 65 when connector with seal is properly screwed down, and cable clamp is correctly tightened.
Without coils, but with ring nut and O-Rings for coil
fitting (solution recommended for flexible stock handling)
With coils having plug-in pins EN 175301-803,
without connectors
With coils having AMP Junior connector, and with bi-directional diode.
Protection class: IP 65 with female connector properly fitted (see drawing).
With coils having DEUTSCH DT 04-2P connector, and with bi-directional diode.
Protection class: IP 69 K with female connector properly fitted (see drawing).
With coils having bi-directional diode and bipolar
sheathed free lead, 350 mm long, without pins.
182-09: Standard.
182-LED-T-A1: with LED monitoring
presence of voltage.
182-09-G-DO-2-1: with VDR (Voltage
Dependent Resistor), to prevent input
voltage over-shootings.
Mat. No. Description
R933002885 182-09 GRAY
R933002889 182-09 BLACK
R933002893 182-LED-T-A1 12 DC
R933002894 182-LED-T-A1 24 DC
R933002896 182-LED-T-A1 48 DC
R933002897 182-LED-T-A1 110 DC
R933002886 182-09-G-DO-2-1 12DC with VDR
R933002887 182-09-G-DO-2-1 24DC with VDR
With coils having Horizontal AMP Junior connector, and with bi-directional diode.
Protection class: IP 65 with female connector properly fitted (see drawing).
03
771
VS120F/125F RE 18302-08/12.098/10 Bosch Rexroth Oil Control S.p.A.
Bosch Rexroth Oil Control S.p.A.Oleodinamica LC DivisionVia Artigianale Sedrio, 1242030 Vezzano sul CrostoloReggio Emilia - ItalyTel. +39 0522 601 801Fax +39 0522 606 226 / 601 [email protected]
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It may
not be reproduced or given to third parties without its consent.
The data specified above only serve to describe the product. No statements
concerning a certain condition or suitability for a certain application can be
derived from our information. The information given does not release the user
from the obligation of own judgment and verification. It must be remembered that
our products are subject to a natural process of wear and aging.
Subject to change.772
RE 18302-09/12.09 1/10
Linear Motion andAssembly Technologies ServicePneumaticsHydraulics
Electric Drives and Controls
DVI0087
6 to14/2 ways/positionsbankable flow diverters flangeable
L732.... (VS241F-VS245F-VS246F-VS247F)
- 6 way 2 position valve.
- Directional spool valve with direct solenoid control.
- Upon request, hydraulic / pneumatic pilot , or manual push and
twist control.
- Usable as stand-alone, or as multiple stackable units.
- Control spool operated by screwed-in solenoid, with easily
extractable coil fastened by a ring nut.
- Wet pin tube for DC coil, with push rod for mechanical overri-
de in case of voltage shortage.
- Unrestricted 360° orientation of DC coil.
- Control spool held in normal position by return spring.
- Optional manual override (push-button or screw type).
- Connectors available: DIN 43650 – ISO 4400, AMP Junior,
DT04-2P (Deutsch), Free leads.
Size 6Series 00Maximum operating pressure 310 bar [4500 psi]Maximum flow 50 l/min [13.2 gpm]Ports G 3/8 - SAE8 - M18x1,5
Summary General specifications
Description Page
General specifications 1
Ordering details 2
Spool variants 2
Principles of operation, cross section 3
Technical data 3
p-Qv characteristic curves 5
External dimensions and fittings 6
Electric connection 9
773
VS241F-245F-246F-247F RE 18302-09/12.092/10 Bosch Rexroth Oil Control S.p.A.
6D 6G
Ia
C1 C4
6E
L 7 3 2 _ _ _ _ _ _ _ _ _ _ _
E
P1 P2
1 0
C2
C3
a
C1 C4
P1 P2
1 0
C2
C3
6B 6F
6H
Ordering details
Spool variants
Family
Compact directional
valve
Type
Flow Diverters
Ports
G 3/8 DIN 3852 = 3
3/4” - 16 UNF (SAE8) = C
M18x1.5 UNI-ISO 6149-1 = Y
M18x1.5 DIN 3852 = Z
Control type
Solenoid (coil C48) without emerg. = 11
Solenoid (coil C48) with
push-button type emergency = 1P
Solenoid (coil C48) with
screw type emergency = 1F
Hydraulic/pneumatic pilot = P1
Manual push and twist control = H1
Spool variants
6 way / 2 position P1 side = 6_
Drain type
Internal drain = I
External drain = E
Assembly
0 = Single diverter
2 = 2 Pre-assembled diverters
3 = 3 Pre-assembled diverters
4 = 4 Pre-assembled diverters
5 = 5 Pre-assembled diverters
Electric connections
00 = Without coil
01 = With coil, without connector
02 = With coil and with non-assembled connector,
type DIN 43650 – ISO 4400
03 = With coil having AMP Junior connector
07 = With coil having DEUTSCH DT 04-2P connect.
31 = With coil and bipolar sheathed lead 350mm
[13.8”] long
Voltage supply
SG = Manual push and twist control
00 = Without coil
OB = 12V DC
AD = 13V DC
OC = 24V DC
AC = 27V DC
OD = 48V DC
31 07 03 02 01 00
Available
connections
774
RE 18302-09/12.09 VS241F-245F-246F-247F Bosch Rexroth Oil Control S.p.A. 3/10
6 5 4 1 2 3
C1 P1 C2 C4 P2 C3
Principles of operation, cross section
A valve basically consists of a housing (1), a control spool (2), a
return spring (3) and a solenoid (5). It is designed to connect
two inlet lines P1 – P2 (normally a set of hoses) and divert
them to either the outlet ports (C1 – C4) with spool in position
“0”, when the solenoid is de-energized, or to the outlet ports
(C2 – C3) with spool in position “1”, when the solenoid is
energized.
With the coil de-energized, the return spring (3) pushes back
the spool (2) and holds it in position “0”
The coil (5) is fastened to the tube by the ring nut (6).
The manual override (6) allows to shift the spool (2) also in
case of voltage shortage.
An external drain, to be connected to tank, ensures shifting
operations also at higher working pressure.
Hydraulic / pneumatic pilot control, or manual push and twist
control for spool shifting are available upon request.
Technical Data (for applications with different specifications consult us)
General
Valve weight kg [lbs] 3.2 [7.06]
Mounting position unrestricted
Ambient Temperature °C [°F] –20....+50 [-4....+122] (NBR seals)
Hydraulic
Maximum pressure with external drain bar [psi] 310 [4500]
Maximum pressure with internal drain bar [psi] 250 [3625]
Maximum pressure with internal drain and
6F or 6G or 6H scheme bar [psi] 310 [4500]
Maximum inlet flow l/min [gpm] 50 [13.2]
Hydraulic fluid
General properties: it must have physical lubricating and chemical properties suitable for use in hydraulic systems such as, for example:
Mineral oil based hydraulic fluids HL (DIN 51524 part 1).
Mineral oil based hydraulic fluids HLP (DIN 51524 part 2). For use of environmentally acceptable fluids (vegetable or polyglycol base)
please consult us.
Fluid Temperature °C [°F] –20....+80 [-4....+176] (NBR seals)
Permissible degree of fluid contamination
ISO 4572: x 75 X=12...15
ISO 4406: classe 20/18/15
NAS 1638: classe 9
Viscosity range mm2/s 5....420
Internal leakage with 100 bar [1450 psi] secondary pressure at C
cc/min [in3/min] min.10 [0.61] max. 25 [1.52]
03
775
VS241F-245F-246F-247F RE 18302-09/12.094/10 Bosch Rexroth Oil Control S.p.A.
1) Nominal - 2) ± 7% at temperature 20°C [68°F]
Electrical
Voltage type DC
Voltage tolerance (nominal voltage) % -10 .... +10
Duty % Continuous, with ambient temperature 50°C [122°F]
Maximum coil temperature °C [°F] 150 [302]
Insulation class H
Compliance with Low Voltage Directive LVD 73/23/EC (2006/95/EC), 2004/108/EC
Coil weight with DIN 43650 – ISO 4400 connector kg [lbs] 0.5 [1.1]
Voltage V 12 13 24 27 48
Voltage type DC DC DC DC DC
Power consumption W 36 36 36 36 36
Current (1) A 3.0 2.77 1.53 1.32 0.75
Resistance (2) 3.97 4.68 15.67 20.42 63.60
Voltage (V) Connector type Coil description Marking Coil Mat no.
=OB 01
=OB 0212 DC
EN 175301-803
(Ex. DIN 43650)C4801 12DC 12 DC R933000063
=OB 03 12 DC AMP JUNIOR C4803 12DC 12 DC R933000065
=OB 07 12 DC DEUTSCH DT 04-2P C4807 12DC 12 DC R933000068
=OB 31 12 DC Cable 350 mm long C4831 12DC 12 DC R933000064
=AD 01
=AD 0213 DC
EN 175301-803
(Ex. DIN 43650)C4801 13DC 13 DC R933000069
=AD 07 13 DC DEUTSCH DT 04-2P C4807 13DC 13 DC R933000073
=OC 01
=OC 0224 DC
EN 175301-803
(Ex. DIN 43650)C4801 24DC 24 DC R933000076
=OC 03 24 DC AMP JUNIOR C4803 24DC 24 DC R933000071
=OC 07 24 DC DEUTSCH DT 04-2P C4807 24DC 24 DC R933000075
=OC 31 24 DC Cable 350 mm long C4831 24DC 24 DC R933000070
=AC 01
=AC 0227 DC
EN 175301-803
(Ex. DIN 43650)C4801 27DC 27 DC R933000077
=AC 07 27 DC DEUTSCH DT 04-2P C4807 27DC 27 DC R933000074
=OD 01 48 DC DIN EN 175301-803 ISO 4400 C4801 48DC 48 DC R933000078
776
RE 18302-09/12.09 VS241F-245F-246F-247F Bosch Rexroth Oil Control S.p.A. 5/10
3 2 1
0 10 20 30 40 50 l/min
bar
6
5
4
3
2
1
0
0 3 6 9 12 13.2 gpm
psi
87
80
60
40
20
0
bar
350
300
200
100
0
psi
5000
4000
3000
2000
1000
0
PR
ES
SU
RE
-p
FLOW-Q
PR
ES
SU
RE
-p
1 2
0 10 20 30 40 50 l/min
0 3 6 9 12 13.2 gpm
FLOW-Q
Characteristic curves
Measured with hydraulic fluid ISO-VG32 at 45° ± 5° C [113° ± 9° F]; ambient temperature 20° C [68° F].
Performances limits
The performance limits refer to the following conditions: coils at operating temperature, voltage supply 10% below
nominal, no back pressure in the tank line.
SchemeCurve n.
P1>C1 P1>C2 P2>C4 P2>C3
6B - 6D - 6E - 6F - 6G - 6H 1 2 2 3
Flow across both ways: forward across P1>C1 and
reverse across C4>P2
Scheme Drain type
1 External (-E-)
2 Internal (-I-)
03
777
VS241F-245F-246F-247F RE 18302-09/12.096/10 Bosch Rexroth Oil Control S.p.A.
External Dimensions and Fittings
1 Ports P1, P2, C1, C2, C3, C4.
2 The mounting surface flatness must comply with
specifications.
3 Two fixation screws M8x65 with strength class DIN 8.8.
Torque 15 – 16 Nm [11,1-11,8 ft-lb].
4 Ring nut for coil locking OD 26.5 mm [1.04 in].
Torque 5-6 Nm [3.6-4.4 ft-lb].
5 Solenoid tube hex 17 mm.
Torque 22-24 Nm [16.2 – 17.7 ft-lb].
6 Minimum clearance needed for connector removal.
7 Optional push-button, P type, emergency for spool opening:
it is pressure stuck to the ring nut for coil locking.
Mat no. R933000043
8 Optional screw type emergency, F type, for spool opening:
it is screwed (torque 6-7Nm [4.4-5.2 ft-lb]) to the tube as
replacement of the coil ring nut. Mat no. R933007215.
9 External drain plug available with G 1/4 and SAE 4 port;
Hex.24 torque 22-24 Nm [16.2 – 17.7 ft-lb].
10 Four through holes, 8.5 mm dia., for coupling of other
similar diverter valve.
11 O-Ring (NBR) for P1 and P2 ports.
12 Identification label.
778
RE 18302-09/12.09 VS241F-245F-246F-247F Bosch Rexroth Oil Control S.p.A. 7/10
13 Dimensions of optional manual version, push and twist
type. Hex 25 mm, torque 22-24 Nm [16.2-17.7 ft-lb].14 Dimensions of optional hydraulic / pneumatic piloted
version. Pilot port plug available with G 1/4: hex 30 mm,
torque 25-27 Nm [18.4-19.9 ft-lb].
External Dimensions and Fittings
03
779
VS241F-245F-246F-247F RE 18302-09/12.098/10 Bosch Rexroth Oil Control S.p.A.
External Dimensions and Fittings
15 Four screws M8x125 DIN 912 for coupling together 2
diverter valves. Suggested bolt strength class DIN 8.8.
Torque 16 – 18 Nm [11.8-13.3 ft-lb].
16 Four screws M8x190 DIN 912 for coupling together 3
diverter valves. Suggested bolt strength class DIN 8.8.
Torque 16-18 Nm [11.-13.3 ft lb].
17 Modular relief valves (cartridges VMD1040SV):
with G 3/8 ports, code L7313610214SV00
with SAE 6 ports, code L731C610214SV00.
Max pressure 250 bar [3625psi].
Total
stacked unitsTotal ports Total length mm Bolts (v) or Tie Rods (t)
TorqueNm / ft-lb
2 8 132 M8x125 (v) 16-18 / [11.8-13.2]
3 10 198 M8x190 (v) 16-18 / [11.8-13.2]
4 12 264 M8x270 (t) 16-18 / [11.8-13.2]
5 14 330 M8x330 (t) 16-18 / [11.8-13.2]
780
RE 18302-09/12.09 VS241F-245F-246F-247F Bosch Rexroth Oil Control S.p.A. 9/10
=00 =01
=02
=03 =07
=31
Electric connection
With coils and with connectors non-assembled, type EN 175301-803.
Protection class: IP 65 when connector with seal is properly screwed down, and cable clamp is correctly tightened.
Without coils, but with ring nut and O-Rings for coil
fitting (solution recommended for flexible stock handling)
With coils having plug-in pins EN 175301-803,
without connectors
With coils having AMP Junior connector, and with bi-directional diode.
Protection class: IP 65 with female connector properly fitted (see drawing).
With coils having DEUTSCH DT 04-2P connector, and with bi-directional diode.
Protection class: IP 69 K with female connector properly fitted (see drawing).
With coils having bi-directional diode and bipolar
sheathed free lead, 350 mm long, without pins.
182-09: Standard.
182-LED-T-A1: with LED monitoring
presence of voltage.
182-09-G-DO-2-1: with VDR (Voltage
Dependent Resistor), to prevent input
voltage over-shootings.
Mat. No. Description
R933002885 182-09 GRAY
R933002889 182-09 BLACK
R933002893 182-LED-T-A1 12 DC
R933002894 182-LED-T-A1 24 DC
R933002896 182-LED-T-A1 48 DC
R933002886 182-09-G-DO-2-1 12DC with VDR
R933002887 182-09-G-DO-2-1 24DC with VDR
03
781
VS241F-245F-246F-247F RE 18302-09/12.0910/10 Bosch Rexroth Oil Control S.p.A.
Bosch Rexroth Oil Control S.p.A.Oleodinamica LC DivisionVia Artigianale Sedrio, 1242030 Vezzano sul CrostoloReggio Emilia - ItalyTel. +39 0522 601 801Fax +39 0522 606 226 / 601 [email protected]
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It may
not be reproduced or given to third parties without its consent.
The data specified above only serve to describe the product. No statements
concerning a certain condition or suitability for a certain application can be
derived from our information. The information given does not release the user
from the obligation of own judgment and verification. It must be remembered that
our products are subject to a natural process of wear and aging.
Subject to change.782
RE 18302-12/12.09 1/8
Linear Motion andAssembly Technologies ServicePneumaticsHydraulics
Electric Drives and Controls
DVI0032
6 to 14/2 ways/positionsbankable flow diverters flangeable
L739.... (VS270F)
- 6 way 2 position valve.
- Directional spool valve with direct solenoid control.
- Upon request, hydraulic / pneumatic pilot , or manual push and
twist control.
- Usable as stand-alone, or as multiple stackable units.
- Control spool operated by screwed-in solenoid, with easily
extractable coil fastened by a ring nut.
- Wet pin tube for DC coil, with push rod for mechanical
override in case of voltage shortage.
- Unrestricted 360° orientation of DC coil.
- Control spool held in normal position by return spring.
- Optional manual override (push-button or screw type).
- Connectors available: DIN 43650 – ISO 4400, AMP Junior,
DT04-2P (Deutsch), Free leads.
Size 8Series 00Maximum operating pressure 310 bar [4500 psi]Maximum flow 80 l/min [21.1 gpm]Ports G 3/8 - G 1/2 - SAE10
Summary General specifications
Description Page
General specifications 1
Ordering details 2
Spool variants 2
Principles of operation, cross section 3
Technical data 3
p-Qv characteristic curves 5
External dimensions and fittings 6
Electric connection 8
783
VS270F RE 18302-12/12.092/8 Bosch Rexroth Oil Control S.p.A.
6B
I
a
C1 C4
6H
L 7 3 9 _ _ _ _ _ _ _ _ _ _ _
E
P1 P2
1 0
C2
C3
a
C1 C4
P1 P2
1 0
C2
C3
6A
Ordering details
Spool variants
Family
Compact directional
valve
Type
Flow Diverters
Ports
G 3/8 DIN 3852 = 3
G 1/2 DIN 3852 = 2
7/8-14 UNF (SAE10) = D
Control type
Solenoid (coil C48) without emerg. = 11
Solenoid (coil C48) with
push-button type emergency = 1P
Solenoid (coil C48) with
screw type emergency = 1F
Hydraulic/pneumatic pilot = P1
Manual push and twist control = H1
Spool variants
6 way / 2 position P1 side = 6_
Drain type
Internal drain = I
External drain = E
Assembly
0 = Single diverter
2 = 2 Pre-assembled diverters
3 = 3 Pre-assembled diverters
4 = 4 Pre-assembled diverters
5 = 5 Pre-assembled diverters
Electric connections
00 = Without coil
01 = With coil, without connector
02 = With coil and with non-assembled connector,
type DIN 43650 – ISO 4400
03 = With coil having AMP Junior connector
07 = With coil having DEUTSCH DT 04-2P connect.
31 = With coil and bipolar sheathed lead 350mm
[13.8”] long
Voltage supply
SG = Manual push and twist control
00 = Without coil
OB = 12V DC
AD = 13V DC
OC = 24V DC
AC = 27V DC
OD = 48V DC
31 07 03 02 01 00
Available
connections
784
RE 18302-12/12.09 VS270F Bosch Rexroth Oil Control S.p.A. 3/8
6 5 4 2 1 3
C1 P1 C2 C4 P2 C3
Principles of operation, cross section
A valve basically consists of a housing (1), a control spool (2), a
return spring (3) and a solenoid (5). It is designed to connect
two inlet lines P1 – P2 (normally a set of hoses) and divert
them to either the outlet ports (C1 – C4) with spool in position
“0”, when the solenoid is de-energized, or to the outlet ports
(C2 – C3) with spool in position “1”, when the solenoid is
energized.
With the coil de-energized, the return spring (3) pushes back
the spool (2) and holds it in position “0”
The coil (5) is fastened to the tube by the ring nut (6).
The manual override (6) allows to shift the spool (2) also in
case of voltage shortage.
An external drain, to be connected to tank, ensures shifting
operations also at higher working pressure.
Hydraulic / pneumatic pilot control, or manual push and twist
control for spool shifting are available upon request.
Technical Data (for applications with different specifications consult us)
General
Valve weight kg [lbs] 3.2 [7.06]
Mounting position unrestricted
Ambient Temperature °C [°F] –20....+50 [-4....+122] (NBR seals)
Hydraulic
Maximum pressure with external drain bar [psi] 310 [4500]
Maximum pressure with internal drain bar [psi] 250 [3625]
Maximum pressure with internal drain and
6H scheme bar [psi] 310 [4500]
Maximum inlet flow l/min [gpm] 80 [21.1]
Hydraulic fluid
General properties: it must have physical lubricating and chemical properties suitable for use in hydraulic systems such as, for example:
Mineral oil based hydraulic fluids HL (DIN 51524 part 1).
Mineral oil based hydraulic fluids HLP (DIN 51524 part 2). For use of environmentally acceptable fluids (vegetable or polyglycol base)
please consult us.
Fluid Temperature °C [°F] –20....+80 [-4....+176] (NBR seals)
Permissible degree of fluid contamination
ISO 4572: x 75 X=12...15
ISO 4406: class 20/18/15
NAS 1638: class 9
Viscosity range mm2/s 5....420
Internal leakage with 100 bar [1450 psi] secondary pressure at C
cc/min [in3/min] min.10 [0.61] max. 20 [1.22]
03
785
VS270F RE 18302-12/12.094/8 Bosch Rexroth Oil Control S.p.A.
1) Nominal - 2) ± 7% at temperature 20°C [68°F]
Electrical
Voltage type DC
Voltage tolerance (nominal voltage) % -10 .... +10
Duty % Continuous, with ambient temperature 50°C [122°F]
Maximum coil temperature °C [°F] 150 [302]
Insulation class H
Compliance with Low Voltage Directive LVD 73/23/EC (2006/95/EC), 2004/108/EC
Coil weight with DIN 43650 – ISO 4400 connector kg [lbs] 0.5 [1.1]
Voltage V 12 13 24 27 48
Voltage type DC DC DC DC DC
Power consumption W 36 36 36 36 36
Current (1) A 3.0 2.77 1.53 1.32 0.75
Resistance (2) 3.97 4.68 15.67 20.42 63.60
Voltage (V) Connector type Coil description Marking Coil Mat no.
=OB 01
=OB 0212 DC
EN 175301-803
(Ex. DIN 43650)C4801 12DC 12 DC R933000063
=OB 03 12 DC AMP JUNIOR C4803 12DC 12 DC R933000065
=OB 07 12 DC DEUTSCH DT 04-2P C4807 12DC 12 DC R933000068
=OB 31 12 DC Cable 350 mm long C4831 12DC 12 DC R933000064
=AD 01
=AD 0213 DC
EN 175301-803
(Ex. DIN 43650)C4801 13DC 13 DC R933000069
=AD 07 13 DC DEUTSCH DT 04-2P C4807 13DC 13 DC R933000073
=OC 01
=OC 0224 DC
EN 175301-803
(Ex. DIN 43650)C4801 24DC 24 DC R933000076
=OC 03 24 DC AMP JUNIOR C4803 24DC 24 DC R933000071
=OC 07 24 DC DEUTSCH DT 04-2P C4807 24DC 24 DC R933000075
=OC 31 24 DC Cable 350 mm long C4831 24DC 24 DC R933000070
=AC 01
=AC 0227 DC
EN 175301-803
(Ex. DIN 43650)C4801 27DC 27 DC R933000077
=AC 07 27 DC DEUTSCH DT 04-2P C4807 27DC 27 DC R933000074
=OD 01 48 DC DIN EN 175301-803 ISO 4400 C4801 48DC 48 DC R933000078
786
RE 18302-12/12.09 VS270F Bosch Rexroth Oil Control S.p.A. 5/8
1 2
0 20 40 60 80 100 l/min
bar
12
10
8
6
4
2
0
0 5 10 15 20 25 26.4 gpm
psi
174
150
100
50
0
1 2bar
350
300
200
100
0
psi
5000
4000
3000
2000
1000
00 20 40 60 80 100 l/min
0 5 10 15 20 25 26.4 gpm
PR
ES
SU
RE
-p
FLOW-Q
PR
ES
SU
RE
-p
FLOW-Q
Characteristic curves
Measured with hydraulic fluid ISO-VG32 at 45° ± 5° C [113° ± 9° F]; ambient temperature 20° C [68° F].
Performances limits
The performance limits refer to the following conditions: coils at operating temperature, nominal voltage supply, no
back pressure in the tank line.
SchemaN° Curva
P1>C1 P1>C2 P2>C4 P2>C3
VS270-G3/8 1 1 1 1
VS270-G1/2 2 2 2 2
VS270-SAE10 2 2 2 2
SCHEME Internal drain External drain
6A-6B 2 1
6H 1 -
The performance curves are measured with flow going
across and caming back, like P1>C1 and C4>P2.
03
787
VS270F RE 18302-12/12.096/8 Bosch Rexroth Oil Control S.p.A.
External Dimensions and Fittings
1 Ports P1, P2, C1, C2, C3, C4.
2 The mounting surface flatness must comply with
specifications.
3 Two fixation screws M8x65 with strength class DIN 8.8.
Torque 15 – 16 Nm [11.1-11.8 ft-lb].
4 Ring nut for coil locking OD 26.5 mm [1.04 in].Torque 5-6 Nm [3.6-4.4 ft-lb].
5 Solenoid tube hex 17 mm.
Torque 22-24 Nm [16.2 – 17.7 ft-lb].
6 Minimum clearance needed for connector removal.
7 Optional push-button, P type, emergency for spool opening:
it is pressure stuck to the ring nut for coil locking.
Mat no. R933000043.
8 Optional screw type emergency, F type, for spool opening:
it is screwed (torque 6-7Nm [4.4-5.2 ft-lb]) to the tube as
replacement of the coil ring nut. (Mat no. R933007215).
9 External drain plug available with G 1/4 and SAE 4 port;
Hex.24 torque 22-24 Nm [16.2 – 17.7 ft-lb].
10 Four through holes, 8.5 mm dia., for coupling of other
similar diverter valve.
11 O-Ring (NBR) for P1 and P2 ports.
12 Identification label.
788
RE 18302-12/12.09 VS270F Bosch Rexroth Oil Control S.p.A. 7/8
13 Dimensions of optional manual version, push and twist
type. Hex 25 mm, torque 22-24 Nm [16.2-17.7 ft-lb].
14 Dimensions of optional hydraulic / pneumatic piloted
version. Pilot port plug available with G 1/4: hex 30 mm,
torque 25-27 Nm [18.4-19.9 ft-lb].
15 Four screws M8x125 DIN 912 for coupling together 2
diverter valves. Suggested bolt strength class DIN 8.8.
Torque 16 – 18 Nm [11.8-13.3 ft-lb].
16 Four screws M8x190 DIN 912 for coupling together 3
diverter valves. Suggested bolt strength class DIN 8.8;
Torque 16-18 Nm [11.8-13.3 ft lb].
External Dimensions and Fittings
Total
stacked unitsTotal ports Total length mm Bolts (v) or Tie Rods (t)
TorqueNm / ft-lb
2 8 132 M8x125 (v) 16-18 / [11.8-13.3]
3 10 198 M8x190 (v) 16-18 / [11.8-13.3]
4 12 264 M8x270 (t) 16-18 / [11.8-13.3]
5 14 330 M8x330 (t) 16-18 / [11.8-13.3]
03
789
VS270F RE 18302-12/12.098/8 Bosch Rexroth Oil Control S.p.A.
Bosch Rexroth Oil Control S.p.A.Oleodinamica LC DivisionVia Artigianale Sedrio, 1242030 Vezzano sul CrostoloReggio Emilia - ItalyTel. +39 0522 601 801Fax +39 0522 606 226 / 601 [email protected]
=00 =01
=02
=03 =07
=31
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It may
not be reproduced or given to third parties without its consent.
The data specified above only serve to describe the product. No statements
concerning a certain condition or suitability for a certain application can be
derived from our information. The information given does not release the user
from the obligation of own judgment and verification. It must be remembered that
our products are subject to a natural process of wear and aging.
Subject to change.
Electric connection
With coils and with connectors non-assembled, type EN 175301-803.
Protection class: IP 65 when connector with seal is properly screwed down, and cable clamp is correctly tightened.
Without coils, but with ring nut and O-Rings for coil
fitting (solution recommended for flexible stock handling)
With coils having plug-in pins EN 175301-803,
without connectors
With coils having AMP Junior connector, and with bi-directional diode.
Protection class: IP 65 with female connector properly fitted (see drawing).
With coils having DEUTSCH DT 04-2P connector, and with bi-directional diode.
Protection class: IP 69 K with female connector properly fitted (see drawing).
With coils having bi-directional diode and bipolar
sheathed free lead, 350 mm long, without pins.
182-09: Standard.
182-LED-T-A1: with LED monitoring
presence of voltage.
182-09-G-DO-2-1: with VDR (Voltage
Dependent Resistor), to prevent input
voltage over-shootings.
Mat. No. Description
R933002885 182-09 GRAY
R933002889 182-09 BLACK
R933002893 182-LED-T-A1 12 DC
R933002894 182-LED-T-A1 24 DC
R933002896 182-LED-T-A1 48 DC
R933002886 182-09-G-DO-2-1 12DC with VDR
R933002887 182-09-G-DO-2-1 24DC with VDR
790
RE 18302-10/12.09 1/8
Linear Motion andAssembly Technologies ServicePneumaticsHydraulics
Electric Drives and Controls
DVI0085
L745... (VS281F-VS285F-VS286F-VS287F-VS289F)
Size 10Series 00Maximum operating pressure 310 bar [4500 psi]Maximum flow 90 l/min [23.77 gpm]Ports G 1/2 - SAE10 - M18x1.5 - JIS B 1/2 - M22x1.5
- 6 way 2 position valve
- Directional spool valve with direct solenoid control
- Upon request, hydraulic / pneumatic pilot , or manual push and
twist control.
- Usable as stand-alone, or as multiple stackable units.
- Control spool operated by screwed-in solenoid.
- Wet pin tube for DC coil, with push rod for mechanical
override in case of voltage shortage
- Unrestricted 360° orientation of DC coil.
- Control spool held in normal position by return spring.
- Optional manual override (push-button or screw type).
- Connectors available: DIN 43650 – ISO 4400, AMP Junior,
DT04-2P (Deutsch), Free leads
6 to14/2 ways/positionsbankable flow diverters flangeable
Summary General specifications
Description Page
General specifications 1
Ordering details 2
Spool variants 2
Principles of operation, cross section 3
Technical data 3
p-Qv characteristic curves 5
External dimensions and fittings 6
Electric connection 8
791
VS281F-VS285F-VS286F-VS287F-VS289F RE 18302-10/12.092/8 Bosch Rexroth Oil Control S.p.A.
L 7 4 5 _ _ _ _ _ _ _ _ _ _ _
6B =
6D =
6E =
C1 C4 C1 C4
6G =
6H =
P1 P2 P1 P2
C2
C3
C2
C3
I E1 10 0a a
Ordering details
Spool variants
Family
Compact directional
valve
Type
Flow Diverters
Ports
G1/2 DIN 3852 = 4
7/8-14 UNF (SAE10) = D
M18x1.5 = Y
JIS B 1/2 = L
M22x1,5 = X
Control type
Solenoid (coil C 65) without emergency = 13
Solenoid (coil C 65) with push-button
type emergency = 1P
Solenoid (coil C 65) with screw
type emergency = 1F
Hydraulic / pneumatic control = P1
Manual push and twist control = H1
Spool variants
6 way / 2 position P1 side = 6_
Assembly
0 = Single diverter
2 = 2 Pre-assembled diverters
3 = 3 Pre-assembled diverters
4 = 4 Pre-assembled diverters
5 = 5 Pre-assembled diverters
Electric connections
00 = Without coil
01 = With coil, without connector
02 = With coil and with non-assembled connector,
type DIN 43650 – ISO 4400
03 = With coil having AMP Junior connector
07 = With coil having DEUTSCH DT 04-2P connect.
31 = With coil and bipolar sheathed lead 350mm
[13.8”] long
Voltage supply
SG = Manual push and twist control
00 = Without coil
OB = 12V DC
AD = 13V DC
OC = 24V DC
AC = 27V DC
OD = 48V DC
31 07 03 02 01 00
Available
connections
Drain type
I = Internal drain
E = External drain
792
RE 18302-10/12.09 VS281F-VS285F-VS286F-VS287F-VS289F Bosch Rexroth Oil Control S.p.A. 3/8
7 6 5 1 2 3 4
C1 P1 C2 C4 P2 C3
Principles of operation, cross section
A valve basically consists of a housing (1), a control spool (2), a
return spring (3) and a solenoid (5). It is designed to connect
two inlet lines P1 – P2 (normally a set of hoses) and divert
them to either the outlet ports (C1 – C4) with spool in position
“0”, when the solenoid is de-energized, or to the outlet ports
(C2 – C3) with spool in position “1”, when the solenoid is
energized.
With the coil de-energized, the return spring (3) pushes back
the spool (2) and holds it in position “0”
The coil (5) is fastened to the tube by the ring nut (6).
The manual override (7) allows to shift the spool (2) also in
case of voltage shortage.
An external drain, to be connected to tank, ensures shifting
operations also at higher working pressure.
Hydraulic / pneumatic pilot control, or manual push and twist
control for spool shifting are available upon request.
Technical Data (for applications with different specifications consult us)
General
Valve weight kg [lbs] 4.15 [7.06]
Mounting position unrestricted
Ambient Temperature °C [°F] –20....+50 [-4....+122] (NBR seals)
Hydraulic
Maximum pressure with external drain bar [psi] 310 [4500]
Maximum pressure with internal drain bar [psi] 250 [3625]
Maximum pressure with internal drain and
6F or 6G or 6H schemebar [psi] 310 [4500]
Maximum flow l/min [gpm] 90 [24]
Hydraulic fluid
General properties: it must have physical lubricating and chemical properties suitable for use in hydraulic systems such as, for example:
Mineral oil based hydraulic fluids HL (DIN 51524 part 1).
Mineral oil based hydraulic fluids HLP (DIN 51524 part 2). For use of environmentally acceptable fluids (vegetable or polyglycol base)
please consult us.
Fluid Temperature °C [°F] –20....+80 [-4....+176] (NBR seals)
Permissible degree of fluid contamination
ISO 4572: x 75 X=12...15
ISO 4406: classe 20/18/15
NAS 1638: classe 9
Viscosity range mm2/s 5....420
Internal leakage with 100 bar [1450 psi] secondary pressure at C
cc/min [in3/min] min.10 [0.61] max. 25 [1.52]
03
793
VS281F-VS285F-VS286F-VS287F-VS289F RE 18302-10/12.094/8 Bosch Rexroth Oil Control S.p.A.
1) Nominal - 2) ± 7% at temperature 20°C [68°F]
Electrical
Voltage type DC
Voltage tolerance (nominal voltage) % -10 .... +10
Duty % Continuous, with ambient temperature 50°C [122°F]
Maximum coil temperature °C [°F] 150 [302]
Insulation class H
Compliance with Low Voltage Directive LVD 73/23/EC (2006/95/EC), 2004/108/EC
Coil weight with DIN 43650 – ISO 4400 connector kg [lbs] 1.05 [2.3]
Voltage V 12 13 24 27 48
Voltage type DC DC DC DC DC
Power consumption W 44 44 44 44 44
Current (1) A 3.6 3.4 1.8 1.60 0.90
Resistance (2) 3.2 3.6 12.8 16.9 50.5
Voltage (V) Connector type Coil description Marking Coil Mat no.
=OB 01
=OB 0212 DC
EN 175301-803
(Ex. DIN 43650)C6501 12DC 12 DC R933000100
=OB 03 12 DC AMP JUNIOR C6503 12DC 12 DC R933000119
=OB 07 12 DC DEUTSCH DT 04-2P C6507 12DC 12 DC R933000107
=OB 31 12 DC Cable 350 mm long C6531 12DC 12 DC R933000104
=AD 01
=AD 0213 DC
EN 175301-803
(Ex. DIN 43650)C6501 13DC 13 DC R933000101
=AD 07 13 DC DEUTSCH DT 04-2P C6507 13DC 13 DC R933000112
=OC 01
=OC 0224 DC
EN 175301-803
(Ex. DIN 43650)C6501 24DC 24 DC R933000102
=OC 03 24 DC AMP JUNIOR C6503 24DC 24 DC R933000120
=OC 07 24 DC DEUTSCH DT 04-2P C6507 24DC 24 DC R933000111
=OC 31 24 DC Cable 350 mm long C6531 24DC 24 DC R933000110
=AC 01
=AC 0227 DC
EN 175301-803
(Ex. DIN 43650)C6501 27DC 27 DC R933000103
=AC 03 27 DC AMP JUNIOR C6503 27DC 27 DC R93307055
=AC 07 27 DC DEUTSCH DT 04-2P C6507 27DC 27 DC R933000113
=OD 01
=OD 0248 DC
EN 175301-803
(Ex. DIN 43650)C6501 48DC 48 DC R933000114
794
RE 18302-10/12.09 VS281F-VS285F-VS286F-VS287F-VS289F Bosch Rexroth Oil Control S.p.A. 5/8
PR
ES
SU
RE
-p
FLOW-Q
PR
ES
SU
RE
-p
1 2
0 15 30 45 60 75 90 l/min
bar
12
9
6
3
0
0 4 8 12 15 18 24 gpm
psi
180
135
90
45
0
1 2bar
350
300
200
100
0
psi
5000
4000
3000
2000
1000
0
FLOW-Q
0 20 40 60 80 100 l/min
0 5 10 15 20 25 26.4 gpm
Characteristic curves
Measured with hydraulic fluid ISO-VG32 at 45° ± 5° C [113° ± 9° F]; ambient temperature 20° C [68° F].
Curve n
P1 > C1 P2 > C4 P1 > C2 P2 > C1
1 1 2 2
Curve n. Drain type
1 External (-E-)
2 Internal (-I-)
Performances limits
The performance limits refer to the following conditions: coils at operating temperature, voltage supply 10% below
nominal, no back pressure in the tank line.
Flow across both ways: forward across P1>C1 and
reverse across C4>P2
03
795
VS281F-VS285F-VS286F-VS287F-VS289F RE 18302-10/12.096/8 Bosch Rexroth Oil Control S.p.A.
External Dimensions and Fittings
1 Ports P1, P2, C1, C2, C3, C4.
2 The mounting surface flatness must comply with specifications.
3 Two fixation screws M8x65 DIN 912 with strength class DIN
8.8. Torque 15-16 Nm [11.1 – 11.8 ft-lb].
4 Ring nut for coil locking OD 34 mm [1.34 in]. Torque 7-8 Nm [5,25,9 ft-lb].
5 Solenoid tube hex 22 mm.
Torque 25-27 Nm [18.4 – 19.9 ft-lb].
6 Minimum clearance needed for connector removal
7 Optional push-button, P type, emergency for spool opening:
it is pressure stuck to the ring nut for coil locking.
Mat no. R933003424.
8 Optional screw, F type, emergency for spool opening: it
is screwed (torque 8-9 Nm [5.9-6.6 ft-lb]) to the tube as
replacement of the coil ring nut.
Mat no. R933003713.
9 External drain plug with G 1/4 and SAE 4 port. Hex 24.
Torque 22-24 Nm [16.2 – 17.7 ft-lb].
10 Four through holes, 8.5 mm dia., for coupling of other
similar diverter valve.
11 Identification label.
796
RE 18302-10/12.09 VS281F-VS285F-VS286F-VS287F-VS289F Bosch Rexroth Oil Control S.p.A. 7/8
Total
stacked unitsTotal ports Total length mm Bolts (v) or Tie Rods (t)
TorqueNm / ft-lb
2 8 132 M8x125 (v) 16-18 / [11.8-13.2]
3 10 198 M8x190 (v) 16-18 / [11.8-13.2]
4 12 264 M8x270 (t) 16-18 / [11.8-13.2]
5 14 330 M8x330 (t) 16-18 / [11.8-13.2]
External Dimensions and Fittings
12 Optional manual version, push and twist type. (Hex 25 mm)
Torque 25-27 Nm [18.4-19.9 ft-lb].
13 Optional hydraulic / pneumatic piloted version. Pilot port
plug available with G 1/4 and SAE4. Hex 30 mm,
torque 25 – 27 Nm [18.4 – 19.9 ft-lb].
14 Four fixation screws M8x125 DIN 912 for assembly of 2
units; strength class DIN 8.8.
Torque 15-16 Nm [11.1 – 11.8 ft-lb].
15 Four fixation screws M8x190 DIN 912 for assembly of 3
units; strength class DIN 8.8.
Torque 15-16 Nm [11.1 – 11.8 ft-lb].
16 Modular relief valves (cartridges VMD1070SV):
with G 1/2 ports, code L7404610214SV00
with SAE 10 ports, code L740D610214SV00.
Max pressure 250 bar [3625psi].
03
797
VS281F-VS285F-VS286F-VS287F-VS89F RE 18302-10/12.098/8 Bosch Rexroth Oil Control S.p.A.
Bosch Rexroth Oil Control S.p.A.Oleodinamica LC DivisionVia Artigianale Sedrio, 1242030 Vezzano sul CrostoloReggio Emilia - ItalyTel. +39 0522 601 801Fax +39 0522 606 226 / 601 [email protected]
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It may
not be reproduced or given to third parties without its consent.
The data specified above only serve to describe the product. No statements
concerning a certain condition or suitability for a certain application can be
derived from our information. The information given does not release the user
from the obligation of own judgment and verification. It must be remembered that
our products are subject to a natural process of wear and aging.
Subject to change.
=00 =01
=02
=03 =07
=31
Electric connection
With coils and with connectors non-assembled, type EN 175301-803.
Protection class: IP 65 when connector with seal is properly screwed down, and cable clamp is correctly tightened.
Without coils, but with ring nut and O-Rings for coil
fitting (solution recommended for flexible stock handling)
With coils having plug-in pins EN 175301-803,
without connectors
With coils having AMP Junior connector, and with bi-directional diode.
Protection class: IP 65 with female connector properly fitted (see drawing).
With coils having DEUTSCH DT 04-2P connector, and with bi-directional diode.
Protection class: IP 69 K with female connector properly fitted (see drawing).
With coils having bi-directional diode and bipolar
sheathed free lead, 350 mm long, without pins.
182-09: Standard.
182-LED-T-A1: with LED monitoring
presence of voltage.
182-09-G-DO-2-1: with VDR (Voltage
Dependent Resistor), to prevent input
voltage over-shootings.
Mat. No. Description
R933002885 182-09 GRAY
R933002889 182-09 BLACK
R933002893 182-LED-T-A1 12 DC
R933002894 182-LED-T-A1 24 DC
R933002896 182-LED-T-A1 48 DC
R933002886 182-09-G-DO-2-1 12DC with VDR
R933002887 182-09-G-DO-2-1 24DC with VDR
798
Bosch Rexroth Oil Control S.p.A.RE 90005-04/04.10
The latest information on products can also be found on Bosch Rexroth web-site:www.boschrexroth.com
8/2 ways/positions fl ow divertersVS570VS575
2G 1/4SAE 4
210 [3045] 10 [2.6] 18302-13 801
Flow diverters8/2 ways/positions
pmax Qmax Designation Type Size Interface bar l/min Data sheet Page [psi] [gpm]
03
799
Bosch Rexroth Oil Control S.p.A. RE 90005-04/04.10
800
RE 18302-13/12.09 1/8
Linear Motion andAssembly Technologies ServicePneumaticsHydraulics
Electric Drives and Controls
DVI0017
8/2 ways/positions flow diverters
L765... (VS570-VS575)
- 8 way 2 position valve.
- Directional spool valve with direct solenoid control.
- Normally used to set up the remote control (ISO – SAE) in the
earth moving machine.
- Control spool operated by screwed-in solenoid, with easily
extractable coil fastened by a ring nut.
- Wet pin tube for DC coil, with push rod for mechanical overri-
de in case of voltage shortage- Unrestricted 360° orientation
of DC coil.
- Control spool held in normal position by return spring.
- Connectors available: DIN 43650 – ISO 4400, AMP Junior,
DT04-2P (Deutsch), Free leads.
Size 2Series 00Maximum operating pressure 210 bar [3045 psi]Maximum flow 10 l/min [2.6 gpm]Ports G 1/4 - SAE 4
Summary General specifications
Description Page
General specifications 1
Ordering details 2
Spool variants 2
Principles of operation, cross section 3
Technical data 3
p-Qv characteristic curves 5
External dimensions and fittings 6
Electric connection 8
801
VS570 - VS575 RE 18302-13/12.092/8 Bosch Rexroth Oil Control S.p.A.
BY
BY a ab b
T2 T1 P2 P1
b b
CY
L 7 6 5 _ 1 0 _ _ I _ _ _ _ 0
B2 B1 A2 A1
CY
T2 T1 P2 P1
B2 B1 A2 A1
a
Ordering details
Configuration
Family
Compact directional
valve
Type
Flow Diverters
Ports
G 1/4 = 2
SAE4 = A
Control type
Solenoid (coil C36) without emergency
Configuration
8 ways / 2 positions = BY
8 ways / 2 positions with detent = CY
Drain type
Internal drain
Electric connections
00 = Without coil
01 = With coil, without connector
02 = With coil and with non-assembled connector,
type DIN 43650 – ISO 4400
03 = With coil having AMP Junior connector
04 = With coil having AMP Junior Horiz. connector
07 = With coil having DEUTSCH DT 04-2P connect.
31 = With coil and bipolar sheathed lead 350mm
[13.8”] long
Voltage supply
00 = Without coil
OB = 12V DC
AD = 13V DC
OC = 24V DC
AC = 27V DC
OD = 48V DC
OE = 110V DC
31 07 04 03 02 01 00
Available connections
802
RE 18302-13/12.09 VS570 - VS575 Bosch Rexroth Oil Control S.p.A. 3/8
7 3 6 1 2 8 6 3 7
BY
CY
4 1 2 5 6 3 7
a
ab
Principles of operation, cross section
A valve basically consists of a housing (1), a control spool (2),
one or two solenoid (3), and a return spring (4).
L76510BY..
If the solenoid is energized, the spool goes from position “0” to
position “b”.
With the coil de-energized, the return spring (3) pushes back
the spool (2) and holds it in position “0”.
The coil (6) is fastened to the tube by the ring nut (7).
L76510CY..
If the solenoid “a” is energized, the spool goes from position
“a” to position “b”. The position “b” is held by the detent (8).
The return to position “a” is obtained energising the solenoid
“b”.
The coil (6) is fastened to the tube by the ring nut (7).
03
803
VS570 - VS575 RE 18302-13/12.094/8 Bosch Rexroth Oil Control S.p.A.
Technical Data (for applications with different specifications consult us)
General
Valve weight CY kg [lbs] 1.88 [4.15]
Valve weight BY kg [lbs] 2.18 [4.8]
Mounting position unrestricted
Ambient temperature, with standard NBR seals °C [°F] –20....+50 [-4....+122]
Hydraulic
Maximum pressure bar [psi] 210 [3045]
Maximum flow l/min [gpm] 10 [2.64]
Hydraulic fluid
General properties: it must have physical lubricating and chemical properties suitable for use in hydraulic systems such as, for example:
Mineral oil based hydraulic fluids HL (DIN 51524 part 1).
Mineral oil based hydraulic fluids HLP (DIN 51524 part 2). For use of environmentally acceptable fluids (vegetable or polyglycol base)
please consult us.
Fluid Temperature °C [°F] –20....+80 [-4....+176] (NBR seals)
Permissible degree of fluid contamination
ISO 4572: x 75 X=12...15
ISO 4406: class 20/18/15
NAS 1638: class 9
Viscosity range mm2/s 5....420
Internal leakage with 100 bar [1450 psi] secondary pressure at C
cc/min [in3/min] min.10 [0.61] max. 20 [1.2]
Electrical
Voltage type DC
Voltage tolerance (nominal voltage) % -10 .... +10
Duty Continuous (100%), with ambient temperature 50°C [122°F]
Maximum coil temperature °C [°F] 150 [302]
Insulation class H
Compliance with Low Voltage Directive LVD 73/23/EC (2006/95/EC), 2004/108/EC
Coil weight with DIN 43650 – ISO 4400 connector kg [lbs] 0.215 [0.44]
Voltage V 12 13 24 27 48 110
Voltage type DC DC DC DC DC DC
Power consumption W 26 26 26 26 26 26
Current (1) A 2.15 2.00 1.10 1.00 0.54 0.27
Resistance (2) 5.5 6.5 22 28 89 413
1) Nominal - 2) ± 7% at temperature 20°C [68°F]
804
RE 18302-13/12.09 VS570 - VS575 Bosch Rexroth Oil Control S.p.A. 5/8
3
21
0 2 4 6 8 10 l/min
bar
10
8
6
4
2
0
0 1 2 2,6 gpm
psi
145
100
50
0
1 2bar
250
200
150
100
50
0 2 4 6 8 10 l/min
0 0.5 1 1.5 2 2.6 gpm
psi
3625
2500
1500
500
0
PR
ES
SU
RE
-p
FLOW-Q
PR
ES
SU
RE
-p
FLOW-Q
Characteristic curves
Measured with hydraulic fluid ISO-VG32 at 45° ± 5° C [113° ± 9° F]; ambient temperature 20° C [68° F].
Performances limits
The performance limits refer to the following conditions: coils at operating temperature, voltage supply 10% below
nominal, no back pressure in the tank line
SchemeCurve n.
A1>P1 B1>T1 A2>P2 B2>T2 A1>T1 B1>P1 A2>T2 B2>P2
BY - CY 2 1 2 1 2 3 2 3
Scheme Curve n.
BY 1
CY 2
Voltage (V) Connector type Coil description Marking Coil Mat no.
=OB 01
=OB 0212 DC
EN 175301-803
(Ex. DIN 43650)C3601 12DC 12 DC R933000044
=OB 03 12 DC AMP JUNIOR C3603 12DC 12 DC R933000047
=OB 04 12 DC AMP JUNIOR Horizontal C3604 12DC 12 DC R933002913
=OB 07 12 DC DEUTSCH DT 04-2P C3607 12DC 12 DC R933000048
=OB 31 12 DC Cable 350 mm long C3631 12DC 12 DC R933000045
=AD 01
=AD 0213 DC
EN 175301-803
(Ex. DIN 43650)C3601 13DC 13 DC R933000051
=AD 07 13 DC DEUTSCH DT 04-2P C3607 13DC 13 DC R933000049
=OC 01
=OC 0224 DC
EN 175301-803
(Ex. DIN 43650)C3601 24DC 24 DC R933000053
=OC 03 24 DC AMP JUNIOR C3603 24DC 24 DC R933000057
=OC 04 24 DC AMP JUNIOR Horizontal C3604 24DC 24 DC R933002914
=OC 07 24 DC DEUTSCH DT 04-2P C3607 24DC 24 DC R933000058
=OC 31 24 DC Cable 350 mm long C3637 24DC 24 DC R933000055
=AC 01
=AC 0227 DC
EN 175301-803
(Ex. DIN 43650)C3601 27DC 27 DC R933000056
=AC 07 27 DC DEUTSCH DT 04-2P C3607 27DC 27 DC R933000050
=OD 01
=OD 0248 DC
EN 175301-803
(Ex. DIN 43650)C3601 48DC 48 DC R933000059
=OD 04 48 DC AMP JUNIOR Horizontal C3604 48DC 48 DC R933002915
=OE 01
=OE 02110 DC
EN 175301-803
(Ex. DIN 43650)C3601 110DC 110 DC R933000061
The performance curves are measured with flow going
across and caming back.
03
805
VS570 - VS575 RE 18302-13/12.096/8 Bosch Rexroth Oil Control S.p.A.
1) 2)
3)
5)
5)
6) 7)
4)
External Dimensions and Fittings
1 Solenoid tube hex 24 mm. Torque 22-24Nm [16.2-17.7 ft-lb].
2 Plug for 2 way version, hex 24 mm.
Torque 22-24Nm [16.2-17.7 ft-lb].
3 Ring nut for coil locking OD 20,4 mm [0.8 in].Torque 3 – 4 Nm [2.2 – 3.0 ft-lb].
4 Two through holes for installation. Recommended screws
M8 with strength class DIN 8.8.
5 Hydraulic Ports (G1/4- SAE4).
6 Minimum clearance needed for connector removal.
7 Identification label.
Measure VS570 VS575
L1 33.8 [1.33] 30.8 [1.21]
L2 59.4 [2.33] 56.4 [2.22]
806
RE 18302-13/12.09 VS570 - VS575 Bosch Rexroth Oil Control S.p.A. 7/8
=00 =01
=02
=03
=07=31
=04
Electric connection
With coils and with connectors non-assembled, type EN 175301-803.
Protection class: IP 65 when connector with seal is properly screwed down, and cable clamp is correctly tightened.
Without coils, but with ring nut and O-Rings for coil
fitting (solution recommended for flexible stock handling)
With coils having plug-in pins EN 175301-803,
without connectors
With coils having AMP Junior connector, and with bi-directional diode.
Protection class: IP 65 with female connector properly fitted (see drawing).
With coils having DEUTSCH DT 04-2P connector, and with bi-directional diode.
Protection class: IP 69 K with female connector properly fitted (see drawing).
With coils having bi-directional diode and bipolar
sheathed free lead, 350 mm long, without pins.
182-09: Standard.
182-LED-T-A1: with LED monitoring
presence of voltage.
182-09-G-DO-2-1: with VDR (Voltage
Dependent Resistor), to prevent input
voltage over-shootings.
Mat. No. Description
R933002885 182-09 GRAY
R933002889 182-09 BLACK
R933002893 182-LED-T-A1 12 DC
R933002894 182-LED-T-A1 24 DC
R933002896 182-LED-T-A1 48 DC
R933002897 182-LED-T-A1 110 DC
R933002886 182-09-G-DO-2-1 12DC with VDR
R933002887 182-09-G-DO-2-1 24DC with VDR
With coils having Horizontal AMP Junior connector, and with bi-directional diode.
Protection class: IP 65 with female connector properly fitted (see drawing).
03
807
VS575 RE 18302-13/12.098/8 Bosch Rexroth Oil Control S.p.A.
Bosch Rexroth Oil Control S.p.A.Oleodinamica LC DivisionVia Artigianale Sedrio, 1242030 Vezzano sul CrostoloReggio Emilia - ItalyTel. +39 0522 601 801Fax +39 0522 606 226 / 601 [email protected]
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It may
not be reproduced or given to third parties without its consent.
The data specified above only serve to describe the product. No statements
concerning a certain condition or suitability for a certain application can be
derived from our information. The information given does not release the user
from the obligation of own judgment and verification. It must be remembered that
our products are subject to a natural process of wear and aging.
Subject to change.808