Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
RevolutionsDesigned by Natalie Crabtree
Featuring The Opposite by Marcia Dersesize: 72” x 72”
windhamfabrics.com06.01.19
FREEPROJECT
please note: before making your project, check for any pattern updates at windhamfabrics.com’s free projects section.
e: [email protected] p: 201-659-0444 • f: 201-659-9719
this is a digital representation of the quilt top, fabric may vary.
Revolutions
1
windhamfabrics.com
KEY FABRIC SKU YD CUTTING INSTRUCTIONS
A 35370S-1 Optic Whitewindham solids 2¼ (12) 6½” x WOF strips. Use Template A to cut (68) pieces.
B 51067-2 Dark ⅞ (4) 6½” x WOF strips. Use Template A to cut (24) pieces.
C 51067-1 Light ⅝ (4) ½” x WOF strips. Use Template B to cut (24) pieces.
D 51070-2 Dark ⅝ (3) 6½” x WOF strips. Use Template A to cut (16) pieces.
E 51068-2 Dark ⅜ (2) 4½” x WOF strips. Use Template B to cut (16) pieces.
F 51065-1 Light ⅞ (4) 6½” x WOF strips. Use Template A to cut (24) pieces.
G 51066-1 Light ½ (3) 4½” x WOF strips. Use Template B to cut (24) pieces.
H 51069-2 Dark ½ (2) 6½” x WOF strips. Use Template A to cut (8) pieces.
I 51071-1 Light ¼ (1) 4½” x WOF strip. Use Template B to cut (8) pieces.
J 37098-16 Cherrypalette ⅜ (2) 4½” x WOF strips. Use Template B to cut (16) pieces.
K 37098-17 Papayapalette ⅜ (2) 4½” x WOF strips. Use Template B to cut (16) pieces.
L 37098-40 Chartreusepalette ½ (3) 4½” x WOF strips. Use Template B to cut (24) pieces.
M 37098-36 Grasspalette ⅜ (2) 4½” x WOF strips. Use Template B to cut (16) pieces.
N 37098-30 Mediterraneanpalette ¼ (1) 4½” x WOF strip. Use Template B to cut (8) pieces.
O37098-42 Mulberrypalette
includes binding¾
(1) 6½” x WOF strip. Use Template A to cut (4) pieces.(8) 2¼” x WOF strips for binding.
Backing 4⅜ 78” x 78” piece of batting.
Cutting Notes: Mark and store your cutting pieces according to the block they have been assigned to, as this will make it much easier when you start piecing. Be sure to read the entire pattern before you begin. Requires curved piecing skills.
WOF = Width of Fabric
PROJECT DISCLAIMER: Every effort has been made to ensure that all projects are error free. All the information is presented in good
faith, however, no warranty can be given nor results guaranteed. Therefore, we assume no responsibility nor damages that may occur when
referring to this pattern. When errors are brought to our attention, we make every effort to correct and post a revision as soon as
possible. We suggest you check windhamfabrics.com for pattern updates and to test the pattern prior to making the project.
Test templates first, before cutting all the pieces. Free projects are not for resale.
Revolutions
2
windhamfabrics.com
WOF = Width of Fabric
Curved Piecing Instructions
For all curved piecing instructions, fold and press each fabric template in half to mark the exact mid-dle of the piece of fabric. Using an erasable marker or pen, make a dot on the middle crease of each fabric template and a ¼’’ from each end of the fabric template that will be sewn. Pin fabric templates A and B together at each mark before sewing to keep templates aligned.
While sewing use fingers to smooth the ¼” seam as you go. Sew slowly for accurate and neat curved piecing.
1. The completed curved blocks feature five colorways combining (2) types of curved units per block. The curved units feature (10) colorways. Follow the diagrams and written instructions in Steps 1A. through 1J. to pair the correct fabrics and templates together. Create the curved units using the fol-lowing template and fabric combinations:
1A. Fabric A Template A + Fabric C Template B – Create (24) units
1B. Fabric A Template A + Fabric E Template B – Create (16) units
1C. Fabric A Template A + Fabric G Template B – Create (24) units
1D. Fabric A Template A + Fabric I Template B – Create (4) units
1E. Fabric O Template A + Fabric I Template B – Create (4) units
1F. Fabric B Template A + Fabric J Template B – Create (8) units
1G. Fabric D Template A + Fabric K Template B – Create (16) units
1H. Fabric F Template A + Fabric L Template B – Create (24) units
1I. Fabric B Template A + Fabric M Template B – Create (16) units
1J. Fabric H Template A + Fabric N Template B – Create (8) units
1A.
1F.
1B.
1G.
1C.
1H.
1D.
1I.
1E.
1J.
Revolutions
3
windhamfabrics.com
WOF = Width of Fabric
2. All curved units created in Steps 1A. – 1J. should measure 6½” unfinished. There should be a total of (144) curved units.
3. Use the following curved unit combinations to complete the curved blocks. Each block will feature (2) pairs of identical units as shown in the diagrams.
3A. Pair units created in Steps 1A. and 1F. as shown in the diagram. Follow the diagrams for accurate unit orientation. Repeat to create (4) complete blocks with this unit combination.
3B. Pair units Created in Steps 1B. and 1G. as shown in the diagram. Follow the diagrams for accu-rate unit orientation. Repeat to create (8) complete blocks with this unit combination.
3C. Pair units created in Steps 1C. and 1H. as shown in the diagram. Follow the diagrams for accurate unit orientation. Repeat to create (12) complete blocks with this unit combination.
3D. Pair units created in Steps 1A. and 1I. as shown in the diagram. Follow the diagrams for accurate unit orientation. Repeat to create (8) complete blocks with this unit combination.
Revolutions
4
windhamfabrics.com
WOF = Width of Fabric
3E. Pair units created in Steps 1D., 1E. and 1J. as shown in the diagram. Follow the diagrams for ac-curate unit orientation. Repeat to create (4) complete blocks with this unit combination.
4. The number of completed blocks should total (36). The curved blocks should measure 12½’’ unfin-ished.
Quilt Assembly
5. Lay out the quilt blocks according to the quilt layout diagram. Some blocks will be turned to con-tinue the chain effect throughout the quilt top.
6. Begin assembling the quilt top in horizontal block rows first. Press seams in alternate directions in each row.
7. Sew together horizontal block rows as shown in the Quilt Assembly Diagram on Page 5.
Finishing
8. With the backing fabric laying taut, place batting and then quilt top to form quilt sandwich.
9. Baste sandwich. Quilt as desired.
10. Bind with Fabric O to finish quilt.
Revolutions
5
windhamfabrics.com
QUILT ASSEMBLY DIAGRAM
1 inch square
PLEASE PRINT TEMPLATES AT 100%.
B
A
Templates - Revolutions
6
windhamfabrics.com
A
B
NOT ACTUAL SIZE, ONLY USE FOR ASSEMBLY REFERENCE.