Upload
votu
View
226
Download
0
Embed Size (px)
Citation preview
Catalogue No. N-859
R
R
TRADE MARK REGISTERED
MARCA REGISTRADA
Revolutionary heading sensor
SATELLITE COMPASSModel SC-50
The future today with FURUNO's electronics technology.
FURUNO ELECTRIC CO., LTD.9-52 Ashihara-cho, Nishinomiya City, Japan Phone: +81 (0)798 65-2111
Fax: +81 (0)798 65-4200, 66-4622 URL: www.furuno.co.jp
The SC-50 is a new satellite compass that uses Furuno�sadvanced GPS technology. This satellite compass can beused for a wide range of applications for any type ofvessel. Radar/ARPA, AIS, ECDIS, Scanning Sonar andAutopilots can utilize the functions of this compass.The SC-50 uses GPS carrier frequency to determineheading and is not affected by ship's speed, latitude,geomagnetism, etc. Settling time is nearly instantaneousand the follow-up performance is excellent, achieving45°/s (SOLAS HSC Code requires 20°/s as a minimum).
The SC-50 delivers GPS positioning, SOG (Speed OverGround), COG (Course Over Ground) and ROT (Rate ofTurn). SOG is remarkably accurate through decoding theDoppler shift in the received satellite signals. Theinformation can be output in IEC61162-2 format at thehigh update rate up to 38.4 kbps to satisfy the high speeddata-output requirements in special applications.
Precision roll and pitch data is output in both analog anddigital formats to external equipment. For sonar or echosounders, the SC-50 offers stable echo pictures bycompensating the transmitted/received beams even inrough seas. Thus, the SC-50 can also function as ahighly accurate motion sensor.
The SC-50 has a unique Set and Drift mode. Whenconnected with a water-tracking speed log, such as the DS-80, it calculates set and drift (tide direction andspeed) in the mode. The display helps a radar operatormanually enter set and drift for the accurate seastabilization pictures.
The SC-50 consists of Antenna Unit, Display Unit andProcessor Unit. The stylish radome antennaaccommodates three GPS antennas. The tri-antennasystem helps reduce the influence of vessels� motionsmore than dual-antenna system.
Furuno’s advanced GPS technology ensuresdata for AIS, ECDIS, Radar/ARPA and more.
Compass Rose Mode
■ Provides highly accurate heading datafor autopilot, radar, AIS, Sonar andplotting systems
■ IMO MSC.116(73) type approved as averified THD (Transmitting HeadingDevice)
■ Rapid 45°/s follow-up rate greatlyexceeds IMO High Speed Craftrequirements 20°/s
■ High accurate GPS, WAAS Data - SOG,COG, ROT, and L/L
■ Precision Pitch/Roll Data in Analog andDigital formats for vessel stabilizers,sonar, etc..
■ Multiple High Speed Heading DataOutput in IEC 61162-1/2 (NMEA0183/HS)
■ High Contrast 4.5" Silver Bright LCD ■ 100% free of yearly or regular
maintenance - No Recurring Costs■ Unique Tri-Antenna System improves
system accuracy and reduces theeffects of yaw, pitch and roll
Processor Unit
Heading
Antenna A1
Antenna A2
Antenna A3
Difference between the�range from satellite to�antenna 1 and the range�to antenna 2.
Fore-
and-
aft li
ne
Vecto
r tode
cide he
ading
North
Principle
s highly accurate heading
With the SC-50, a ship's heading is determined by decodingthe phase data in the GPS carrier frequency. In principle, a pair of antennas A1(ref) and A2(fore), eachconnected with an associated GPS engine and processor, areinstalled along the ship's fore-aft line. The GPS systems at A1and A2 calculate the range and azimuth to the satellite.
The difference in range between A1 and A2 is ∆λ + nλ where λis 19 cm and n* is automatically found during the initialization stage. A fraction of a carrier wavelength, ∆λ, isprocessed by Furuno's advanced kinematic technology ingeographical survey, thus determining a vector (range andorientation) A1 to A2, i.e., heading of ship relative to north.
In reality, the third antenna is added to reduce the influence ofpitch, roll and yaw, and five satellites are used to process 3Ddata (by 3rd sat), to reduce clock derived error (by 4th sat),and to calculate n in initial stage (by 5th sat).
If the GPS signal is blocked by a tall building or under abridge, the 3-axis vibrating-gyro rate sensors in the processor unit take the place of the satellite until all five satellites are in view. The rate sensors also contribute toregulating the heading data against pitch, roll and yawtogether with the third antenna (A3 in the illustration).
*Ambiguity "n" is resolved by LAMBDA algorithm developed by Prof.Teussen, Delft University of Technology, The Netherlands.
Heading Mode ROT Mode
Set & Drift Mode
Steering Mode
(Current (Set and Drift) and Distance Run is selectable.)
NAV Data Mode
240 9.5"
1606.3"
622.4"
160
6.3
"
100 3.9"
1505.9"
650
25.
6"
240
9.5
"
4-M10
1. AccuracyHeading ±1.0° (95% static accuracy)
(IMO THD MSC.116(73) static accuracy: ±1.0° x secant Lat.)
GPS Fix 10 m (95%)DGPS Fix 5 m (95%)WAAS Fix 3 m (95%)
2. Follow-up 45°/s rate-of-turn3. Settling time 3 min4. Interface
Number of ports10 ports* 5 ports in AD-10 or
10 ports in IEC 61162-1/-2* can be utilized in menu selection
1 port AD-10 onlySerial data sentence
25, 100, 200 ms, 1, 2 s data rate: HDT, HDM(Heading), ROT(Rate of turn)ATT(Pitch and Roll)
1, 2 s data rate: VHW(Heading), VTG, VBW(SOG), GGA, GLL, GNS(L/L), ZDA(UTC), VDR( Set and Drift)
Log Output 1 port: 200/400 p/nm (closure)Alarm Output 1 port: Alarm signal (closure signal)Heading Input 1 port: Backup Heading
(AD-10/IEC 61162-1)HDT, HDG, HDM, VBW, VHW, VLW
DGPS Input 1 port: RTCM SC-104 format5. Receiver Type Twelve discrete channels.
C/A code, all-in-view6. Receive Freq L1 (1575.42 MHz)7. Display Unit Monochrome LCD, 4.5" diagonal
95 (W) x 60 (H)mm, 120 x 64 pixels8. Display Mode Steering, Nav Data, Compass Rose,
ROT, Heading and Set and Drift modes
POWER SUPPLY 12-24 VDC, 15 W
ENVIRONMENTALIEC 60945 for EMC, Vibration, Temperature
EQUIPMENT LISTStandard1. Display Unit SC-502 1 unit2. Antenna Unit SC-303 with 15 m cable 1 unit3. Processor Unit SC-501 1 unitOption1. Antenna Cable, 30 m CP20-01700, 50 m CP20-017102. Flush Mount Kit S type CP20-17, F type CP20-29
04032/5KS Printed in JapanFURUNO U.S.A., INC.Camas, Washington, U.S.A.Phone: +1 360-834-9300 Telefax: +1 360-834-9400
FURUNO (UK) LIMITEDDenmead, Hampshire, U.K.Phone: +44 2392-230303 Telefax: +44 2392-230101
FURUNO FRANCE S.A.Bordeaux-Mérignac, FrancePhone: +33 5 56 13 48 00 Telefax: +33 5 56 13 48 01
FURUNO ESPANA S.A.Madrid, SpainPhone: +34 91-725-90-88 Telefax: +34 91-725-98-97
FURUNO DANMARK ASHvidovre, DenmarkPhone: +45 36 77 45 00 Telefax: +45 36 77 45 01
FURUNO NORGE A/SÅlesund, NorwayPhone: +47 70 102950 Telefax: +47 70 127021
FURUNO SVERIGE ABVästra Frölunda, SwedenPhone: +46 31-7098940 Telefax: +46 31-497093
FURUNO FINLAND OYEspoo, FinlandPhone: +358 9 4355 670 Telefax: +358 9 4355 6710
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
SPECIFICATIONS OF SC-50
209 8.2"175 6.9"
85 3.4"78 3.1"15 0.6"
145 5.5" 32 1.3"
100
3.9
"
125
4.9
"
4- 6
70 2.8"
215 8.5"
205 8.1"
130
5.1
"
15 0.8"
12 0.5"max
50 2
.0"
70 2
.8"
68 2.7"17 0.7"61 2.4"
Cutout for flush mount
92 3
.6"
167 6.6"
63 2.5"
4- 5.5
4- 5.5187 7.4"
112
4.4
"
Cutout for flush mount
183 7.2"
92 3
.6"
210
8.3
"
308
12.
1"29
0 1
1.4"
31.5
1.2"
350 13.8"330 13.0"
310 12.2" 68 2.7"
Processor Unit
Antenna UnitSC-303
Display Unit0.55 kg 1.2 lb
4.2 kg 9.3 lb
4.2 kg 9.3 lb
12-24 VDC
Antenna Unit Display Unit
Processor Unit
DGPS Beacon ReceiverGR-80
RadarAutopilot (HCS/TCS)VideoPlotterCurrent IndicatorScanning SonarECDISAIS
Current IndicatorScanning Sonar
Pitch/RollAnalog
Speed alarm/Heading alarm(Contact)
MJ-7
Option or local supply
Heading (Backup)/STW
15/30/50 m
IEC 611162-1/-2 or AD-10SC-501
SC-502SC-303
10 m
IEC 611162-1/-2 or AD-10AD-10
IEC 611162-1/-2 or AD-10
IEC 611162-1/-2 or AD-10IEC 611162-1/-2 or AD-10
CompassRose*
Repeater Interface*for synchro orstep by step
* For further info, contact our depot
TNC-PS-3D-15 x3 orTPPX6-3D2V-15M x1
Interconnection Diagram
Flush Mount Kit F type
Flush Mount Kit S type
Catalogue No. N-858
R
R
TRADE MARK REGISTERED
MARCA REGISTRADA
Revolutionary heading sensor
SATELLITE COMPASSModel SC-110
The future today with FURUNO's electronics technology.
FURUNO ELECTRIC CO., LTD.9-52 Ashihara-cho, Nishinomiya City, Japan Phone: +81 (0)798 65-2111
Fax: +81 (0)798 65-4200, 66-4622 URL: www.furuno.co.jp
With the SC-50, a ship's heading is determined bydecoding the phase data in the GPS carrier frequency.In principle, a pair of antennas A1(ref) and A2(fore),each connected with anassociated GPS engine andprocessor, are installed along theship's fore-aft line. The GPSsystems at A1 and A2 calculatethe range and azimuth to thesatellite.
The difference in range betweenA1 and A2 is ∆λ + nλ where λ is19 cm and n* is automaticallyfound during the initializationstage. A fraction of a carrierwavelength, ∆λ, is processed byFuruno's advanced kinematictechnology in geographicalsurvey, thus determining a vector(range and orientation) A1 to A2,i.e., heading of ship relative tonorth.
In reality, the third antenna is added to reduce theinfluence of pitch, roll and yaw, and five satellites areused to process 3D data (by 3rd sat), to reduce clock
derived error (by 4th sat), andto calculate n in initial stage (by5th sat).
If GPS signal is blocked by atall building or under a bridge,the 3-axis vibrating-gyro ratesensors in the processor unittake the place of the satelliteuntil all five satellites are inview. The rate sensors alsocontribute to regulating theheading data against pitch, rolland yaw together with the third antenna (A3 in theillustration).
*Ambiguity "n" is resolved byLAMBDA algorithm developed byProf. Teussen, Delft University ofTechnology, The Netherlands.
Heading
θ
Antenna A1
Antenna A2
Antenna A3
Difference between the�range from satellite to�antenna 1 and the range�to antenna 2.
nλ
∆λ
λ
Fore-
aft li
ne
Vecto
r tode
cide he
ading
North
Principle
Furuno’s high-grade satellite compasswith its superior heading accuracy for AIS, ECDIS, RADAR
Compass Rose Mode
■ Heading information for ARPA, AIS,ECDIS, Scanning Sonar, Autopilot
■ Heading accuracy ±0.6° exceedingIMO MSC.116(73) as a THD(Transmitting Heading Device)
■ SOG, COG, ROT, pitch and roll
■ Excellent follow-up rate of 45°/sexceeding requirements of highspeed craft (20°/s)
■ High speed heading data output inIEC 61162-2 format
■ Clear 4.5" silver bright LCD showingmimic compass rose with digitalreadouts
■ Analog and digital data output forpitch and roll for ship’s motioncorrection
12-24 VDC
Antenna Unit Display Unit
Processor Unit
DGPS Beacon ReceiverGR-80
RadarECDISAISAutopilot (HCS/TCS)VideoPlotterCurrent IndicatorScanning Sonar
Current IndicatorScanning Sonar
Pitch/RollAnalog
Speed alarm/Heading alarm(Contact)
MJ-7
Option or local supply
Heading (Backup)/STW
15/30/50 m
IEC 611162-1/-2/AD-10
SC-1101
SC-502SC-1203F
10 m
IEC 611162-1/-2/AD-10
AD-10
IEC 611162-1/-2/AD-10
IEC 611162-1/-2/AD-10IEC 611162-1/-2/AD-10
CompassRose*
Repeater Interface*AMI-GFV "KW-941" etc.for synchroAMI-GFV "KW-903-SX" etc. for step by step
* For further info, contact our depot
InterconnectionDiagram
The SC-110 is an enhanced GPS-based compassdesigned for onboard equipment requiring a headingsignal, such as ARPA, AIS, ECDIS, Scanning Sonar,Autopilot, etc. This equipment also provides all thenecessary functions the latest GPS navigators do.Fallback arrangement by 3-axis vibrating-gyro ratesensor provides accurate and constant headinginformation even when the satellite signals are blockedunder bridges or reduced by tall buildings. The SC-110also regulates the compass function when the ship issubject to pitching, rolling and yawing. The performanceis not affected by ships’ speed, latitude, geomagnetism,etc. Settling time is almost instant and follow-upperformance is excellent, achieving 45°/s (SOLAS HSCCode requires 20°/s as a minimum).In addition to the heading information and positionaldata, SOG (speed over ground), COG (course overground) and ROT (rate of turn) are displayed. SOG isremarkably accurate by decoding the Doppler shift in thereceived satellite signals. The interface delivers trueheading and course/speed over ground, rate of turn aswell as GPS fix through up to 11 ports. The heading
information is put out in IEC 61162-2 format at a highupdate rate of 25ms to satisfy the high speed data-outputrequired in the special applications.The roll and pitch angle is also output both in analog anddigital formats to the equipment, such as sonar,sounders etc. It is useful in offering the stable echopictures by compensating the transmitted/receivedbeams even in the rough seas. Thus, the SC-110 can beused as a highly accurate motion sensor.The SC-110 has a unique Set and Drift mode. Whenconnected with a water-tracking speed-log, such as DS-80, it calculates set and drift (tide direction and speed) inthe mode. The display helps a radar operator to manuallyenter set and drift for accurate sea stabilization pictures.The SC-110 consists of 3 antennas on a solid precisionsupport, a processor unit, and a display unit. The tri-antenna system helps reduce the influence of ships’motions. There are no mechanical parts such as gimbalsand rotating meters, thus the compass is free fromregular maintenance.
(Current (Set and Drift) and Distance Run is selectable.)
Heading ModeROT Mode
Set & Drift ModeSteering Mode
NAV Data Mode
1. AccuracyHeading: ±0.6° (95 % static accuracy)
(IMO THD MSC.116(73) static accuracy: ±1.0° x secant Lat.)
GPS: 10 m (95 %)DGPS: 5 m (95 %)
2. Follow-up 25°/s rate-of-turn3. Settling time 4 min4. Interface
Number of ports10 ports* 5 ports in AD-10 or
10 ports in IEC 61162-1/-2* Number of ports is changed by system configuration.
1 port AD-10 onlySerial data sentence
25/100/200 ms, 1s data rate: HDT, HDM(Heading), Patt(Pitch, Roll and Yaw), ROT(Rate of turn)
1/2 s data rate: VHW(Heading), VTG, VBW(SOG), GGA, GLL, GNS(L/L), ZDA(UTC), GSA, GSV
Log Output 1 port: 200/400 p/nm (closure)Alarm Output 1 port: Alarm signal (closure signal)Heading Input 1 port: Backup Heading
(AD-10/IEC 61162-1/-2)HDT, HDG, HDM, VBW, VHW, VLW
DGPS Input 1 port: RTCM SC-104 format5. Receiver Type Twelve discrete channels.
C/A code, all-in-view6. Receive Freq L1 (1575.42 MHz)7. Display Unit 4.5" diagonal 95 (W) x 60 (H)mm,
120 x 64 pixels8. Display Mode Steering, Nav Data, Set and Drift,
Compass Rose, ROT, HeadingPOWER SUPPLY 12-24 VDC, 15 WENVIRONMENTALIEC 60945 for EMC, Vibration, TemperatureEQUIPMENT LISTStandard1. Display Unit SC-502 1 unit2. Antenna Unit with 15 m cable SC-1203F 1 unit3. Processor Unit SC-1101 1 unit4. Standard Spare Parts, Installation Materials 1 setOptional1. Antenna Cable, 15 m 20S0336-1, 30 m CP20-01700,
50 m CP20-017102. Flush Mount Kit S type CP20-17, F type CP20-293. Repeater Interface for synchro or step by step
02085Y Printed in JapanFURUNO U.S.A., INC.Camas, Washington, U.S.A.Phone: +1 360-834-9300 Telefax: +1 360-834-9400
FURUNO (UK) LIMITEDDenmead, Hampshire, U.K.Phone: +44 2392-230303 Telefax: +44 2392-230101
FURUNO FRANCE S.A.Bordeaux-Mérignac, FrancePhone: +33 5 56 13 48 00 Telefax: +33 5 56 13 48 01
FURUNO ESPANA S.A.Madrid, SpainPhone: +34 91-725-90-88 Telefax: +34 91-725-98-97
FURUNO DANMARK ASHvidovre, DenmarkPhone: +45 36 77 45 00 Telefax: +45 36 77 45 01
FURUNO NORGE A/SÅlesund, NorwayPhone: +47 70 102950 Telefax: +47 70 127021
FURUNO SVERIGE ABVästra Frölunda, SwedenPhone: +46 31-7098940 Telefax: +46 31-497093
FURUNO SUOMI OYHelsinki, FinlandPhone: +358 9 341 7570 Telefax: +358 9 341 75716
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
SPECIFICATIONS OF SC-110
209 8.2"
175 6.9"
85 3.4"
78 3.1"15 0.6"
140 5.5" 32 1.3"
100
3.9
"
125
4.9
"
4- 6
Processor Unit
Antenna Unit
315 12.4"
200
7.9
"
265
10.
4"10
0�3.
9"
103�
4.1"
30�
1.2"
335 13.2"355 14.0"
4 - 6
( 994)
860.8 33.9"(1016 40")
(901
35.
3")
( 1150)
172 6.8"
115 4.5"Display Unit 0.6 kg 1.3 lb
6.8 kg 15.0 lb
3.6 kg 7.9 lb
RMarine
Satellite Compass
Features:
• no maintenance• compliant with IMO requirements for THD• high accuracy 0.5 deg (RMS)• short start-up time 5 min• fast follow up rate 25 deg/sec• can be combinated with Anschütz
gyro compasses • compatible to all Raytheon / Anschütz systems• new Novatel GPS antenna technology • watertight display optional • easy to install
The new Satellite Compass Standard 21 GPS isstabilised by turn-rate gyros, any short-terminterruption or shadowing of GPS is bridged byinertial means.Satellite Compass 21 GPS block diagram
Processing Unit10-36 V DC2 x serial outputAnschütz course busor NMEA 0183
CANopen maritime
Standard 21 GPS
Processing Unit
HeadingRollPositionSpeed
Operator Unit
The new Anschütz Satellite Compass
uses GPS signals to produce ship's headinginformation. It can be used as a compass sensorfor repeaters, radars, electronic chart systems,AIS, scanning sonars, and TV-antennas.
1120(44.10)
300
(11.
81)
396
(15.
59)
136
(5.35)
1000(39.37)
ø 45-ø 70(1.77-2.76)
Fore Aft
GPS Receiver Antenna
Connection Box
Dimensions in mm (inch)
Subject to alteration due to technical developments without notice.
Technical Data
All rights reserved · Printed in Germany
RM 801.89 e / L&S 0401
RMarineRaytheon Marine GmbHHigh Seas ProductsD-24100 KielGermanyTel +49(0)4 31-30 19-0Fax +49(0)4 31-30 19-291Email [email protected]
accuracy: 0.5 deg (RMS)
angular resolution: 0.1 deg
startup time: 5 min
Interfaces: 2 x CANopen maritime
2 x serial (Anschütz course bus
or NMEA 0183)
power: 10 - 36 V DC
enclosure: operator unit IP 23 (optional IP 56)
antenna unit IP 56
processing unit IP 23
components: 1 operator unit
1 antenna unit
1 processing unit
1 antenna cable 30 m
1 connection cable
1 power cable
1 manual
options: 1 wall mounting bracket for
operator unit (IP 56)
display modes: digital heading
tape repeater (analog heading)
roll and pitch
SOG and COG
position (lat / lon)
satellite sky plot
192(7.56)
96(3
.78)
Operator Unit
100(3.94)
307(12.09)
152(5.98)
252
(9.9
2)
Operator Unit
Processing Unit
Antenna Unit
KGC-1• Highly accurate heading information
readily available• Stable and fast follow-up capability
for rapid rate of turn• Maintenance free
GPS Compass
FEATURES• The 1˚ rms heading accuracy has been achieved based on KODEN’s unique phase measurement technique.• Fast start-up! Heading information is available in approximately 2 minutes after the unit is turned on.• In addition to the heading information, the unit provides own position and speed information.• Unlike the conventional gyrocompass, no routine check or maintenance are necessary.
OKGC1-00 04 XIII SI 5Y1PRINTED IN JAPAN
DIMENSIONS AND WEIGHT
SPECIFICATIONSStandard equipment
EQUIPMENT LIST
CONNECTIONS
* Specifications subject to change without notice.
OVERSEAS DEPT.13-24, TAMAGAWA 2-CHOME, OTA-KUTOKYO, 146-0095 JAPANTEL : +81 3 3756-6918FAX: +81 3 3756-6831E-MAIL: [email protected]
www.koden-electronics.co.jp
KODEN ELECTRONICS CO., LTD.
FOR DETAILS, PLEASE CONTACT:
Certified to ISO 9001 ( )
Safety precaution
To ensure proper and safe use of the equipment,please carefully read and follow the instructions inthe OPERATION MANUAL.
Receiving frequency 1575.42 MHz ± 1 MHzReceiving channel Parallel 9 ChannelSensitivity Better than -130 dBmSetting time 2min (at standard hot-start time)Heading accuracy 1˚ rmsHeading resolution 0.1˚Rate of turn Less than 25˚/sFollow-up acceleration Less than 1 gPitch / roll angle Less than 30˚Base line length 0.5 mTime to Cold start 50 sec (standard)position fix Warm start 45 sec (standard)
Hot start 20 sec (standard)Positioning accuracy Position GPS: 15 m (2 drms, SA=OFF, PDOP 3)
Velocity 1 m / sec (rms, SA=OFF, PDOP 3)Datum 86 system (WGS-84,Tokyo etc.)Output data level RS-422Output data port Heading data output: 2 (50 ms to 1 s)
Navigation data output: 2 (1 s)Output data format NMEA0183Ver.2.0/IEC61162-1Output data sentence HDT, ROT, GGA, VTG, GLL, ZDA, GSA, GSV,
RMC, PKODA, PKODG1, PKODG7Power supply Voltage 10.8 to 31.2 VDC
Consumption Less than 8 W (at 24 VDC)Temperature GPS Antenna -25˚C to +55˚Crange Processor Unit -15˚C to +55˚CWaterproof GPS Antenna IPX6grade Processor Unit IPX0
Processor Unit KGC-1 1.2kgGPS Antenna GA-11 1.4kgDC Power cable CW-255-2M With a 3A fuse 2mAntenna cable CW-392-15M 2 pcs. per set 15mConnecting cable CW-376-5M With 6-pin waterproof connector and one end plain 5mFuse F-7161, 3A For spare 1Installation Material 1setOperation manual 1
Antenna Cable CW-393-30M 2 pcs. per set 30mCW-394.KIT 2 pcs. per set 60m
Connecting cable CW-373-5M With 6-pin waterproof connectors at both ends 5mCW-374-5M With a 6-pin connector and a 6-pin waterproof connector 5mCW-376-5M With a 6-pin waterproof connector and one end plain 5mCW-381-5M With a 38-pin connector and a 6-pin waterproof connector 5m
Connector LTWBD-06BFFA-L180 6P waterproof connector (LTW) 1Power Rectifier PS-003A With 2 spare fuses(5A) 2.8kgAC power cable VV-2D8-3M Flying leads on both ends 3m
GPS Antenna GA-11
Processor UnitKGC-1
RADAR etc.
RADAR etc.
Navigation Unit
Heading data
Heading data
Navigation data
Navigation UnitNavigation data
Power rectifier
10.8 to 31.2 VDC
100/115 VAC200/230 VAC
Thick solid lines: Standard devices and connections.Thin solid lines: Optional connections.
Option
BO
500(19 11/16)
593(23 3/8)
58(2
5/1
6)10
2(4
)
(6 11/16)
93(3
21/
32)
150
(5 2
9/32
)
184(7 1/4)
220(8 5/8)
DATAALARMPOWER
POWER DATA1 DATA3 ANT1OFF
ON
85(3
3/8
)
ANT2DATA4DATA2GNDMODE
245
(9 5
/8)
GPS Antenna GA-11
Processor Unit KGC-1
Unit: mm (inch)
Weight: 1.4kg
Weight: 1.2kg