Upload
trinhbao
View
225
Download
0
Embed Size (px)
Citation preview
REVO1 LINE ARRAY SPEAKER ENCLOSURES
PASSIVE MODELS
www.altoproaudio.com
Version 1.0 OCT. 2008
English
owner's Manual
CAUTIONRISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK
PLEASE DO NOT REMOVE THE COVER OR
THE BACK PANEL OF THIS EQUIPMENT.
THERE ARE NO PARTS NEEDED BY USER
INSIDE THE EQUIPMENT. FOR SERVICE,
PLEASE CONTACT QUALIFIED SERVICE
CENTERS.
WARNINGTo reduce the risk of electric shockand fire, do not expose this equipmentto moisture or rain.
Dispose of this product shouldnot be placed in municipal wasteand should be separate collection.
11.
12.
Move this Equipment only with a cart,stand, tripod, or bracket,specified by themanufacturer, orsold with theEquipment. Whena cart is used, usecaution whenmoving the cart /equipmentcombination toavoid possibleinjury from tip-over.
Permanent hearing loss may be caused byexposure to \ extremely high noise levels.The US. Government's Occupational Safetyand Health Administration (OSHA) hasspecified the permissible exposure to noiselevel.These are shown in the following chart:
According to OSHA, an exposure to high SPL inexcess of these limits may result in the loss ofhear. To avoid the potential damage of heat, it isrecommended that Personnel exposed toequipment capable of generating high SPL usehearing protection while such equipment isunder operation.
This symbol, wherever used, alerts you to thepresence of un-insulated and dangerous voltages
within the product enclosure. These are voltages thatmay be sufficient to constitute the risk of electricshock or death.
This symbol, wherever used, alerts you toimportant operating and maintenance instructions.
Protective Ground TerminalAC mains (Alternating Current)
ON: Denotes the product is turned on.OFF: Denotes the product is turned off.
The apparatus shall be connected to a mainssocket outlet with a protective earthingconnection.
The mains plug or an appliance coupler is usedas the disconnect device, the disconnect deviceshall remain readily operable.
Describes precautions that should be observed toprevent damage to the product.
Read this Manual carefully before operation.
Keep this Manual in a safe place.
Be aware of all warnings reportedwith this symbol.
Keep this Equipment away from water andmoisture.
Clean it only with dry cloth. Do not usesolvent or other chemicals.
Do not damp or cover any cooling opening.Install the equipment only in accordance withthe Manufacturer's instructions.
Power Cords are designed for your safety. Donot remove Ground connections! If the plugdoes not fit your AC outlet, seek advice froma qualified electrician. Protect the powercord and plug from any physical stress toavoid risk of electric shock. Do not placeheavy objects on the power cord. This couldcause electric shock or fire.
Unplug this equipment when unused for longperiods of time or during a storm.
Refer all service to qualified service personnelonly. Do not perform any servicing other thanthose instructions contained within theUser's Manual.
To prevent fire and damage to the product,use only the recommended fuse type asindicated in this manual. Do not short-circuitthe fuse holder. Before replacing the fuse,make sure that the product is OFF anddisconnected from the AC outlet.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Please read.
Hazardous Live Terminal
CAUTION
HOURS X DAY EXAMPLE
864321,510,50,25 or less
SPL
90929597100102105110115
Small gigtrainSubway trainHigh level desktop monitorsClassic music concert
Rock concert
IMPORTANT SAFETY INSTRUCTION
1. INTRODUCTION TO THE REVO1 SAT208P ........................................................................2
2. REVO1 SAT208P TECHNICAL SPECIFICATION ..................................................................3
3. INTRODUCTION TO THE REVO1 SUB118P........................................................................4
6. HIGH FREQUENCY CONFIGURATOR (HFC) ......................................................................7
IN THIS MANUAL:
4. REVO1 SUB118P TECHNICAL SPECIFICATION ................................................................5
5. LAYOUT OF CONNECTOR PANEL REVO1 SAT 208P...........................................................6
7. REVO1 MAXIMUM ARRAY SIZE ....................................................................................8
8. DEPLOYING THE SYSTEM IN SUSPENSION & COMPRESSION ..........................................9
1
9. SPEAKER MANAGEMENT: MAXIDRIVE3.4+ ....................................................................10
10. HOOK-UP: 12XSAT208P+8XSUB118P CONFIGURATION...............................................11
10. HOOK-UP: 8XSAT208P+4XSUB118P CONFIGURATION.................................................12
10. HOOK-UP: 4XSAT208P+2XSUB118P CONFIGURATION.................................................13
11. REVO1 LINE ARRAY HARDWARE PARTS ....................................................................14
12. CONTROL ELEMENTS: MAXIDRIVE3.4+ PROCESSOR ...................................................15
13. CONTROL ELEMENTS: D4 AMPLIFIER..........................................................................16
14. WARRANTY .............................................................................................................17
The REVO1 is a compact two-way passive, line array system, intended for use in arrays with fixed curvature,
up to six cabinets of SAT208P. REVO1 is a versatile loudspeaker system for medium & large Indoor venues.
it is suitable in small and medium outdoor scale application, or as a delay tower for large scale sound
reinforcement system.
REVO1 was born for making a line-array with fixed curvature, with 100 horizontal & 40 Vertical coverage
pattern, aim to simulate a coherent waveguide with six enclosure.
A main frame hardware defines the tilting of the complete array system between +20 /-25 . The SAT208P
includes a dual angle pole socket, plus the accessory for a suspension options. It is easy to use integral
rigging hardware, and give the possibility to assemble a max of 6 x SAT208P in suspension or 1x SUB118P
plus 4 x SAT208P in the same way as a single source. A high frequency selector is included in the passive
crossover for giving you more flexibility to define an amplitude shading of the REVO1. The 0dB position is
normally used to coverage the near field audience. The +3dB position is normally used to coverage the far
field audience. The SAT208P is normally used in Passive mode, and no restriction exist for use in Bi-Amp
mode with the way of Passive Active selector. The SAT208P is equipped with two custom high power 8"
Mid-Bass of the 2" sandwich copper voice coil on fiberglass former, and two1"high frequency drivers with
1.4" voice coil of titanium diaphragm are used on double proprietary waveguide horn.
1. INTRODUCTION TO THE REVO1 SAT208P
Dimension Drawings for REVO1 SAT208P
423.5
7.5
620
271.5
REVO1 SAT 208P
PASSIVE
PIN1+1-: INPUT
PIN2+2-: N/C
POWER HANDLING:
400 W AES
1600 W PEAK
IMPEDANCE:
8 Ohm
BI-AMP
LO-MID: 400 W
HIGH: 75 W
IMPEDANCE:
LO-MID: 8 Ohm
HIGH: 8 Ohm
BI-AMP
PIN1+1-: LO-MID
PIN2+2-: HIGH
MODEL SERIAL
HIGH0dB +3dB
INPUT
THRU
Designed in Italy
BI-AMPPASSIVE
2
2. REVO1 SAT208P TECHNICAL SPECIFICATION
REVO1 SAT 208PConfiguration
Operating Frequency Range
Frequency Response
Coverage Horizontal
Power Rating (AES Standard)
Transducers Low-Mid
65 Hz/20 kHz (-10 dB)
Two-way, Passive or Bi-Amp, with a total of four speakers device
77 Hz/18 kHz (+/-3 dB)
100 nominal, single unit
400 W/800 W/1600W passive mode
2 x 8" Mid-Bass, 2" high-power voice coil, ceramic magnet,
2x1, 4" Titanium diaphragm, neodymium magnet,1"exit Impedance 16 ohm
Weather resistant cone. Impedance 16 ohm
95 dB SPL (passive mode)
Model No.
Maximum Peak SPL 126 dB SPL (calculated)
Bi-amp Low 400 W/800 W
Bi-amp High 75 W/150 W
Coverage Vertical 7.5 variable with array configuration
Transducers High
Crossover modes Passive or Bi-Amp with externally selector
High frequency externally level selector,
Used for far field (+3 dB) or Near field(0dB)
System Sensitivity (1w@1mt) 97 dB SPL, passive version
Bi-Amp Low 97 dB (device parallel)
Bi-Amp High 107 dB (2 device parallel)
Nominal Impedance Passive 8 ohm
Bi-Amp Low 8 ohm (2 device parallel)
Bi-Amp High 8 ohm (2 device parallel)
Suspension / Mounting Integrated hardware for suspension in Line
Array, dual pole socket, two handle
Enclosure 18mm calibrated plywood, black finish,
Perforated metal grille, black finish
Input Connectors Two Speakon N-L 4 type,
Passive, Input 1+/1- Output 1+/1-
Bi-Amp, Low 1+/1- High 2+/ 2-
Dimension (H x W x D) 271.5 mm x 620 mm x 423.5 mm
(10.7" x 24.4" x 16.7")
Net Weight (Kg/lbs) 21.8 kg (48 lbs)
1. "Frequency Response" is measured in half-space condition.
2. AES filtered pink noise with 6 dB crest factor for 2 hours.
HIGH FREQ
LOW FREQ LOW FREQ
HIGH FREQ
3
REVO1 SAT208P BLOCK DIAGRAM
3. INTRODUCTION TO THE REVO1 SUB118P
Dimension Drawings for REVO1 SUB118P
The SUB118P is a vented subwoofer equipped with a single custom high power 18 Subwoofer with 4"
high-power sandwich copper voice coil on fiberglass former, double spider, ceramic magnet, and weather
resistant cone. The enclosure is made with a 18mm multi-layer plywood, finished with anti-scratch black
paint, with a strong perforated metal grille, two metal handles, one pole socket for satellite and four wheels.
"
792.5
700
620
620
REVO1 SUB 118P
POWER HANDLING:
750 W AES
1500 W PEAK
IMPEDANCE:
8 Ohm
MODEL
SERIAL
Designed in Italy
INPUT THRU/OUTPUT
DIRECT PASSIVE
4
REVO1 SUB 118PModel No.
Configuration Vented Subwoofer, Passive or Direct
Operating Frequency Range 37 Hz~200 Hz (-10 dB)
Frequency Response 43 Hz~200 Hz (+/- 3 dB)
Maximum Peak SPL 129 dB SPL (calculated)
Power Rating (AES Standard) 750 W/1500 W
Transducers Low 18" Subwoofer, 4" high-power voice coilCeramic magnet, weather resistant cone.
Crossover modes Passive, Active with externally selector in direct connection
System Sensitivity (1w@1mt) 97 dB SPL, passive version
Nominal Impedance 8 ohm, nominal
Suspension / Mounting Single 36 mm pole socket, four integrated point
For line array suspension, two handle, four optional wheel
Enclosure 18 mm calibrated plywood, black finish, perforated metal grille
Input Connectors Two SPK N-L 4 type,
Passive, Input 1+/1- Output 1+/1-
Direct 1+/1- ( 2 SPK parallel ) with externally selector
Dimension (H x W x D) 620 mm x 620 mm x 700 mm
(24.4" x 24.4" x 27.5")
Net Weight (Kg/lbs) 51.8 Kg (113.4 lbs)
4. REVO1 SUB118P TECHNICAL SPECIFICATION
1. "Frequency Response" is measured in half-space condition.
2. AES filtered pink noise with 6 dB crest factor for 2 hours.
Rear panel
REVO1 SUB 118P
POWER HANDLING:
750 W AES
1500 W PEAK
IMPEDANCE:
8 Ohm
MODEL
SERIAL
Designed in Italy
INPUT THRU/OUTPUT
DIRECT PASSIVE
5
REVO1 SUB 118P BLOCK DIAGRAM
REVO1 SAT 208P
PASSIVE
PIN1+1-: INPUT
PIN2+2-: N/C
POWER HANDLING:
400 W AES
800 W PEAK
IMPEDANCE:
8 Ohm
BI-AMP
LO-MID: 400 W
HIGH: 75 W
IMPEDANCE:
LO-MID: 8 Ohm
HIGH: 8 Ohm
BI-AMP
PIN1+1-: LO-MID
PIN2+2-: HIGH
MODEL SERIAL
HIGH0dB +3dB
INPUT
THRU
Designed in Italy
BI-AMPPASSIVE
1 High Frequency Configurator (HFC)
The High Frequency Configurator gives you the possibility to define the best sound pressure level in front
of the audience. The HFC is included in the passive crossover and work only in Passive-Mode.
The +3 dB position is normally used for the SAT208P that work in array, for covering the more distant
audience. The 0dB is normally used for covering the nearest audience.
+60
+110
+70
+80
+90
+100
d
B
S
P
L
20 20k50 100 200 500 1k 2k 5k 10k
Hz
REVO1 SAT208P + SUB118P + MAXIDRIVE3.4+
2 Frequency Response
In the frequency response is visible the HFC in the two different position of the selector, 0dB (dotted line) and +3dB
(continuous).
6
5. LAYOUT OF THE CONNECTOR PANEL REVO1 SAT208P
1 Medium Array ConfigurationThe below is an example of applying the HFC in four SAT208P in array. In this particular configuration,
the HFC on the top speaker is set at +3 dB, and the bottom speaker 0 dB.
6. HIGH FREQUENCY CONFIGURATOR (HFC)
+3dB
0dB
+3dB
+3dB
0dB
+3dB
2 Small Array Configuration
This is the example of the HFC application at two SAT208P in a small array, with tilted speaker set at
+3 dB and the bottom speaker at 0 dB.
Do not stack more than two SAT208P speaker on the pole. Be sure to lock the two speaker cabinets,
with the original hardware.
7
FLOOR
1 ArrayREVO1 FrameThe following table defines the maximum number of speakers that may be suspended using the REVO1 FB-1 array
frame. A security design factor is maintained for the speaker configurations indicated in the table.
7. REVO1 MAXIMUM ARRAY SIZE
Maximum quantity of REVO1 SAT208P in array
Maximum quantity of REVO1 SUB118P in array
2xSAT
8
0 1xSUB 0 0
2 Suspension Safety WarningNever exceed the maximum recommended speaker cabinet listed on the table.
Research and understand the local regulation and requirements of the country where you intend to install the line
array.
A correct assemble of all REVO1 hardware is required for safety system.suspension
3 Array Frame Connection
REVO1 FB-1frame is connected to REVO1 SAT-HD-L and REVO1 SAT-HD-R with ALTO quick release pins.
4 Lock The Loudspeakers TogetherAny time two or more SAT208P and SUB118P are arrayed together, they must be mechanically secured to each
other. See the diagram below for details.
Max Max
3xSAT 4xSAT 5xSAT 6xSAT
1xSUB
REVO1 SAT 208P
8. DEPLOYING THE SYSTEM IN SUSPENSION & COMPRESSION
+3dB
+3dB
+3dB
0dB
30
+3dB
+3dB
+3dB
+3dB
+3dB
0dB
45
30
+3dB
+3dB
+3dB
+3dB
15
+3dB
0dB
9
1 Suspension
2 Compression
FLOOR
REVO1 MAXIDRIVE3.4+ User Preset:2S18+6208U13
EDIT OUTPUT GAIN
OP1&2 -3dB
OP3&4 0dB(Default)
OP5&6 0dB(Default)
EDIT COMP./LIM
OP3&4
OP5&6
OP1&2 SLOW LIM. 16.0
FAST LIM. 14.0
FAST LIM. 14.0
EDIT POLARITY
OP1&2 NORMAL
OP3&4 NORMAL
OP5&6 NORMAL
EDIT XOVER FILTER TYPE FILTER SHAPE FILTER FREQ PHASE
OP1&2 LPF LR24 125,0Hz 0
HPF LR24 37,2Hz
OP3&4 LPF Thru 2K00Hz 0
HPF LR24 82,5Hz
OP5&6 LPF Thru 2K00Hz 0
HPF LR24 82,5Hz
EDIT OUT EQ FILTER SELECT FILTER TYPE FILTER FREQ FLITER Q FILTER GAIN
OP1&2 EQ1 PEAK 37,2Hz 1,95 +3,0
EQ2 PEAK 101,0Hz 1,95 +6,0
EQ3 Default PEAK 2K00 1,00 0,0
EQ4 Default PEAK 2K00 1,00 0,0
EQ5 Default PEAK 2K00 1,00 0,0
OP3&4 EQ1 PEAK 4K76Hz 1,0 -6,0
EQ2 Hish6 10K93Hz -3,0
EQ3 PEAK 8K28Hz 1,95 +3,0
EQ4 PEAK 2K00 1,00 0,0
OP5&6 EQ1 4K76Hz 1,0 -6,0
10K93Hz -3,0
8K28Hz 1,95 +3,.0
2K00 1,00 0,0
2K00 1,00 0,0
PEAK
EQ2
EQ3
EQ4 Default
EQ5 Default
Hish6
EQ5 PEAK 2K00 1,00 0,0
PEAK
PEAK
PEAK
Default
Default
10
9. Speaker management: MAXIDRIVE3.4+
! USER PRESET:2S18+6208U13
11
HOOK
UP
10. HOOK-UP: 12xSAT208P+8xSUB118P CONFIGURATION
6R
EV
O1
SA
T-H
D-L
per
array
6R
EV
O1
SA
T-H
D-R
per
array
Hardw
are
for
each
REV
O1
SU
B1
18
P
1R
EV
O1
SU
B-H
D-L
1R
EV
O1
SU
B-H
D-R
Hardw
are
for
six
REV
O1
SA
T2
08
P
Deplo
yin
suspensio
nor
com
pressio
n
EN
TE
RE
NT
ER
PR
EV
PR
EV
NE
XT
NE
XT
ES
CE
SC
MO
DE
MO
DE
CL
IPC
LIP 66 12
12
18
18
24
24
AB
INP
UT
LE
VE
LIN
PU
TL
EV
EL
MU
TE
MU
TE
CL
IPC
LIP 66 12
12
24
24
LIM
ITL
IMIT
OU
TP
UT
LE
VE
LO
UT
PU
TL
EV
EL
CL
IPC
LIP 66 12
12
24
24
LIM
ITL
IMIT
CL
IPC
LIP 66 12
12
24
24
LIM
ITL
IMIT
CL
IPC
LIP 66 12
12
24
24
LIM
ITL
IMIT
CL
IPC
LIP 66 12
12
24
24
LIM
ITL
IMIT
CL
IPC
LIP 66 12
12
24
24
LIM
ITL
IMIT
OU
TP
UT
LE
VE
LO
UT
PU
TL
EV
EL
OU
TP
UT
LE
VE
LO
UT
PU
TL
EV
EL
OU
TP
UT
LE
VE
LO
UT
PU
TL
EV
EL
OU
TP
UT
LE
VE
LO
UT
PU
TL
EV
EL
OU
TP
UT
LE
VE
LO
UT
PU
TL
EV
EL
MU
TE
MU
TE
MU
TE
MU
TE
MU
TE
MU
TE
MU
TE
MU
TE
MU
TE
MU
TE
CA
RD
CA
RD
3- W
AY
STER
EO
DIG
ITA
LC
RO
SSO
VER
3-W
AY
STER
EO
DIG
ITA
LC
RO
SSO
VER
MA
XID
RIV
E3.4
+M
AX
IDR
IVE3.4
+
12
34
56
ED
IT
UT
ILIT
Y
DE
LA
Y
PR
ES
ET
Ap
pa
rate
ns
ka
lla
ns
luta
sti
lljo
rda
tu
tta
gn
ar
de
na
ns
luts
till
ett
na
tve
rk
PW
R
OF
F
ON
AC
INP
UT
14W
95
-24
0V
50
/60
Hz
95
-24
0V
50
/60
Hz
FU
SE
:9
5-1
20
VT
50
0m
AL
21
0-2
40
VT
31
5m
AL
DIG
ITA
LIN
RS
48
5O
UT
RS
48
5IN
RS
23
2IN
PU
TA
INP
UT
B4
32
1
OU
TP
UT
S
56
A102
DE
SIG
NE
DIN
ITA
LYM
AD
EIN
CH
INA
PU
SH
21
3
NE
WT
IDE
PU
SH
21
3
NE
WT
IDE
PU
SH
1
3
2NE
WT
IDE
PU
SH
1
3
2NE
WT
IDE
PU
SH
21
3
NE
WT
IDE
21
3
NE
WT
IDE
PU
SH
21
3
NE
WT
IDE
PU
SH
21
3
NE
WT
IDE
21
3
NE
WT
IDE
21
3
NE
WT
IDE
PU
SH
21
3
NE
WT
IDE
SU
B1
SU
B2
SU
B3
SU
B4
IN1
LIN
K1
IN2
LIN
K2
IN3
LIN
K3
R
LT
O
RE
VO
1-C
NP
BR
IDG
ED
CH
1C
H2
CH
3C
H4
BR
IDG
ED
MO
NO
BR
IDG
ED
MO
NO
OU
TP
UT
OU
TP
UT
CH
3
CH
1
CH
4
CH
2
BR
IDG
ED
INP
UT
BR
IDG
ED
INP
UT
PU
SH
PU
SH
PU
SH
PU
SH
BR
IDG
ED
BR
IDG
ED
CH
1C
H2
CH
3C
H4
BR
IDG
ED
MO
NO
BR
IDG
ED
MO
NO
OU
TP
UT
OU
TP
UT
CH
3
CH
1
CH
4
CH
2
BR
IDG
ED
INP
UT
PA
RA
LL
EL
INP
UT
PU
SH
PU
SH
PU
SH
PU
SH
PA
RA
LL
EL
BR
IDG
ED
CH
1C
H2
CH
3C
H4
BR
IDG
ED
MO
NO
BR
IDG
ED
MO
NO
OU
TP
UT
OU
TP
UT
CH
3
CH
1
CH
4
CH
2
BR
IDG
ED
INP
UT
PA
RA
LL
EL
INP
UT
PU
SH
PU
SH
PU
SH
PU
SH
PA
RA
LL
EL
BR
IDG
ED
CH
1C
H2
CH
3C
H4
BR
IDG
ED
MO
NO
BR
IDG
ED
MO
NO
OU
TP
UT
OU
TP
UT
CH
3
CH
1
CH
4
CH
2
BR
IDG
ED
INP
UT
BR
IDG
ED
INP
UT
PU
SH
PU
SH
PU
SH
PU
SH
BR
IDG
ED
BR
IDG
ED
CH
1C
H2
CH
3C
H4
BR
IDG
ED
MO
NO
BR
IDG
ED
MO
NO
OU
TP
UT
OU
TP
UT
CH
3
CH
1
CH
4
CH
2
BR
IDG
ED
INP
UT
BR
IDG
ED
INP
UT
PU
SH
PU
SH
PU
SH
PU
SH
BR
IDG
ED
BR
IDG
ED
CH
1C
H2
CH
3C
H4
BR
IDG
ED
MO
NO
BR
IDG
ED
MO
NO
OU
TP
UT
OU
TP
UT
CH
3
CH
1
CH
4
CH
2
BR
IDG
ED
INP
UT
PA
RA
LL
EL
INP
UT
PU
SH
PU
SH
PU
SH
PU
SH
PA
RA
LL
EL
BR
IDG
ED
CH
1C
H2
CH
3C
H4
BR
IDG
ED
MO
NO
BR
IDG
ED
MO
NO
OU
TP
UT
OU
TP
UT
CH
3
CH
1
CH
4
CH
2
BR
IDG
ED
INP
UT
PA
RA
LL
EL
INP
UT
PU
SH
PU
SH
PU
SH
PU
SH
PA
RA
LL
EL
BR
IDG
ED
CH
1C
H2
CH
3C
H4
BR
IDG
ED
MO
NO
BR
IDG
ED
MO
NO
OU
TP
UT
OU
TP
UT
CH
3
CH
1
CH
4
CH
2
BR
IDG
ED
INP
UT
BR
IDG
ED
INP
UT
PU
SH
PU
SH
PU
SH
PU
SH
BR
IDG
ED
PU
SH
21
3
NE
WT
IDE
21
3
NE
WT
IDE
PU
SH
21
3
NE
WT
IDE
PU
SH
21
3
NE
WT
IDE
21
3
NE
WT
IDE
21
3
NE
WT
IDE
PU
SH
21
3
NE
WT
IDE
SU
B1
SU
B2
SU
B3
SU
B4
IN1
LIN
K1
IN2
LIN
K2
IN3
LIN
K3
R
LT
O
RE
VO
1-C
NP
PU
SH
21
3
NE
WT
IDE
21
3
NE
WT
IDE
PU
SH
21
3
NE
WT
IDE
PU
SH
21
3
NE
WT
IDE
21
3
NE
WT
IDE
21
3
NE
WT
IDE
PU
SH
21
3
NE
WT
IDE
SU
B1
SU
B2
SU
B3
SU
B4
IN1
LIN
K1
IN2
LIN
K2
IN3
LIN
K3
R
LT
O
RE
VO
1-C
NP
PU
SH
21
3
NE
WT
IDE
21
3
NE
WT
IDE
PU
SH
21
3
NE
WT
IDE
PU
SH
21
3
NE
WT
IDE
21
3
NE
WT
IDE
21
3
NE
WT
IDE
PU
SH
21
3
NE
WT
IDE
SU
B1
SU
B2
SU
B3
SU
B4
IN1
LIN
K1
IN2
LIN
K2
IN3
LIN
K3
R
LT
O
RE
VO
1-C
NP
SA
TL
1
SA
TL
2
SA
TL
3
SA
TL
4
SA
TL
5
D4
75
0W
4
(dB
)
121
6
18
20
22
24 2
6
28
30
6
CH
1(d
B)
121
6
18
20
22
24 2
6
28
30
6
CH
2(d
B)
121
6
18
20
22
24 2
6
28
30
6
CH
3(d
B)
121
6
18
20
22
24 2
6
28
30
6
CH
4
SIG
CL
IPP
RO
TS
IGC
LIP
PR
OT
SIG
CL
IPP
RO
TS
IGC
LIP
PR
OT
SL
6
SL
9
SL
12
SA
TL
1
SA
TL
2
SA
TL
3
SA
TL
4
SA
TL
5
SA
TL
6
SB
L1
SB
L2
SB
L3
SB
L4
SA
TR
1
SA
TR
2
SA
TR
3
SA
TR
4
SA
TR
5
SA
TR
6
SB
R1
SB
R2
SB
R3
SB
R4
SL
6
SL
7
SL
8
SR
9
SA
TL
6
SA
TR
1
SA
TR
2
SA
TR
3
SA
TR
4
SA
TR
5
SA
TR
6
SL
7
SL
8
SL
10
SL
11
SR
10
SR
11
SR
12
SR
12
SR
11
SR
10
SR
9
SR
5S
R4
SR
5S
R4
SR
6S
R7
SR
8
SR
3S
R2
SR
1S
UB
R4
SU
BR
3S
UB
R2
SU
BR
1
SU
BL
4S
UB
L3
SU
BL
2S
UB
L1
SB
L4
SB
L3
SB
L2
SB
L1
SL
9S
L1
0S
L11
SL
12
SL
4S
L5
SL
5S
L4
SL
6S
L7
SL
8
SL
3S
L2
SL
1
SL
3S
L2
SL
1
SR
3S
R2
SR
1
LE
FT
AR
RA
Y
RE
VO
1S
AT
20
8P
RIG
HT
AR
RA
Y
RE
OV
1S
AT
20
8P
ALT
OP
roce
ssor
MA
XID
RIV
E3.
4+
ALTO
Con
neto
r pac
kR
EVO
1-C
NP
ALT
OP
ow
erA
mp
lifi
ers
:4
D4
ALT
OP
ow
erA
mp
lifi
ers
:4
D4
ALTO
Con
neto
r pac
kR
EVO
1-C
NP
SB
R4
SB
R3
SB
R2
SB
R1
RA
CK
1R
AC
K2
SU
BL
1S
UB
L2
SU
BL
3S
UB
L4
Su
bw
oo
fer
RE
VO
1S
UB
11
8P
SU
BR
1S
UB
R2
SU
BR
3S
UB
R4
Su
bw
oo
fer
RE
VO
1S
UB
11
8P
12
D4
75
0W
4
(dB
)
121
6
18
20
22
24 2
6
28
30
6
CH
1(d
B)
121
6
18
20
22
24 2
6
28
30
6
CH
2(d
B)
121
6
18
20
22
24 2
6
28
30
6
CH
3(d
B)
121
6
18
20
22
24 2
6
28
30
6
CH
4
SIG
CL
IPP
RO
TS
IGC
LIP
PR
OT
SIG
CL
IPP
RO
TS
IGC
LIP
PR
OT
Ap
pa
rate
ns
ka
lla
ns
luta
sti
lljo
rda
tu
tta
gn
ar
de
na
ns
luts
till
ett
na
tve
rk
PW
R
OF
F
ON
AC
INP
UT
14W
95
-24
0V
50
/60
Hz
95
-24
0V
50
/60
Hz
FU
SE
:9
5-1
20
VT
50
0m
AL
21
0-2
40
VT
31
5m
AL
DIG
ITA
LIN
RS
48
5O
UT
RS
48
5IN
RS
23
2IN
PU
TA
INP
UT
B4
32
1
OU
TP
UT
S
56
A1
02
DE
SIG
NE
DIN
ITA
LYM
AD
EIN
CH
INA
PU
SH
21
3
NE
WT
IDE
PU
SH
21
3
NE
WT
IDE
PU
SH
1
3
2NE
WT
IDE
PU
SH
1
3
2NE
WT
IDE
EN
TE
RE
NT
ER
PR
EV
PR
EV
NE
XT
NE
XT
ES
CE
SC
MO
DE
MO
DE
CL
IPC
LIP 66 12
12
18
18
24
24
AB
INP
UT
LE
VE
LIN
PU
TL
EV
EL
MU
TE
MU
TE
CL
IPC
LIP 66 12
12
24
24
LIM
ITL
IMIT
OU
TP
UT
LE
VE
LO
UT
PU
TL
EV
EL
CL
IPC
LIP 66 12
12
24
24
LIM
ITL
IMIT
CL
IPC
LIP 66 12
12
24
24
LIM
ITL
IMIT
CL
IPC
LIP 66 12
12
24
24
LIM
ITL
IMIT
CL
IPC
LIP 66 12
12
24
24
LIM
ITL
IMIT
CL
IPC
LIP 66 12
12
24
24
LIM
ITL
IMIT
OU
TP
UT
LE
VE
LO
UT
PU
TL
EV
EL
OU
TP
UT
LE
VE
LO
UT
PU
TL
EV
EL
OU
TP
UT
LE
VE
LO
UT
PU
TL
EV
EL
OU
TP
UT
LE
VE
LO
UT
PU
TL
EV
EL
OU
TP
UT
LE
VE
LO
UT
PU
TL
EV
EL
MU
TE
MU
TE
MU
TE
MU
TE
MU
TE
MU
TE
MU
TE
MU
TE
MU
TE
MU
TE
CA
RD
CA
RD
3- W
AY
STER
EO
DIG
ITA
LC
RO
SSO
VER
3-W
AY
STER
EO
DIG
ITA
LC
RO
SSO
VER
MA
XID
RIV
E3
.4+
MA
XID
RIV
E3
.4+
12
34
56
ED
IT
UT
ILIT
Y
DE
LA
Y
PR
ES
ET
PU
SH
21
3
NE
WT
IDE
21
3
NE
WT
IDE
PU
SH
21
3
NE
WT
IDE
PU
SH
21
3
NE
WT
IDE
21
3
NE
WT
IDE
21
3
NE
WT
IDE
PU
SH
21
3
NE
WT
IDE
SU
B1
SU
B2
SU
B3
SU
B4
IN1
LIN
K1
IN2
LIN
K2
IN3
LIN
K3
RE
VO
1-C
NP
BR
IDG
ED
CH
1C
H2
CH
3C
H4
BR
IDG
ED
MO
NO
BR
IDG
ED
MO
NO
OU
TP
UT
OU
TP
UT
CH
3
CH
1
CH
4
CH
2
BR
IDG
ED
INP
UT
BR
IDG
ED
INP
UT
PU
SH
PU
SH
PU
SH
PU
SH
BR
IDG
ED
BR
IDG
ED
CH
1C
H2
CH
3C
H4
BR
IDG
ED
MO
NO
BR
IDG
ED
MO
NO
OU
TP
UT
OU
TP
UT
CH
3
CH
1
CH
4
CH
2
BR
IDG
ED
INP
UT
PA
RA
LL
EL
INP
UT
PU
SH
PU
SH
PU
SH
PU
SH
PA
RA
LL
EL
BR
IDG
ED
CH
1C
H2
CH
3C
H4
BR
IDG
ED
MO
NO
BR
IDG
ED
MO
NO
OU
TP
UT
OU
TP
UT
CH
3
CH
1
CH
4
CH
2
BR
IDG
ED
INP
UT
PA
RA
LL
EL
INP
UT
PU
SH
PU
SH
PU
SH
PU
SH
PA
RA
LL
EL
BR
IDG
ED
CH
1C
H2
CH
3C
H4
BR
IDG
ED
MO
NO
BR
IDG
ED
MO
NO
OU
TP
UT
OU
TP
UT
CH
3
CH
1
CH
4
CH
2
BR
IDG
ED
INP
UT
BR
IDG
ED
INP
UT
PU
SH
PU
SH
PU
SH
PU
SH
BR
IDG
ED
SA
TL
1
SA
TL
2
SA
TL
3
SA
TL
4
LE
FT
AR
RA
Y
SA
TR
1
1
SA
TR
2
SA
TR
3
SA
TR
4
SL
4
SL
5
SR
4
SR
5
SL
2
SL
3
SR
2
SR
3
SR
3S
L3
SR
2S
L2
SU
BL
1S
UB
L2
SU
BR
1S
UB
R2
SR
4S
R5
SA
TL
1
SA
TL
2
SA
TL
3
SA
TL
4
SA
TR
1
SA
TR
2
SA
TR
3
SA
TR
4
SB
L1
SB
L2
SB
R1
SB
R2
RIG
HT
AR
RA
Y
RE
VO
1S
ER
IE
SS
TE
RE
OL
IN
EA
RR
AY
WIT
HS
UB
S
(8
ST
A2
08
P+
4S
UB
11
8P
)
RE
VO
1S
AT
20
8P
Su
bw
oo
fer
RE
VO
1S
UB
11
8P
RE
VO
SA
T2
08
P
Su
bw
oo
fer
RE
VO
1S
UB
11
8P
SL
4S
L5
SB
L1
SB
L2
SB
R1
SB
R2
ALT
OP
ow
erA
mp
lifi
ers
:4
D4
ALT
OP
roce
ssor
MA
XID
RIV
E3.
4+
ALTO
Con
neto
r pac
kR
EVO
1-C
NP
SR
1S
L1
SL
1S
R1
SU
BR
1S
UB
L2
Hardw
are
for
four
REV
O1
SA
T2
08
P4
REV
O1
SA
T-H
D-L
per
array
4R
EV
O1
SA
T-H
D-R
per
array
Deplo
yin
suspensio
nor
com
pressio
n
Hardw
are
for
each
REV
O1
SU
B1
18
P1
REV
O1
SU
B-H
D-L
1R
EV
O1
SU
B-H
D-R
SU
BL
1S
UB
R2
HOOK
UP
10. HOOK-UP:8xSAT208P+4xSUB118P CONFIGURATION
13
HOOK
UP
10. HOOK-UP: 4xSAT208P+2xSUB118P CONFIGURATION
Hardw
are
for
tw
oR
EV
O1
SA
T2
08
P2
REV
O1
SA
T-H
D-L
per
array
2R
EV
O1
SA
T-H
D-R
per
array
Deplo
yin
suspensio
nor
com
pressio
n
SU
BR
1
14
682
REVO1 FB-1
11. REVO1 LINE ARRAY HARDWARE PARTS
REVO1 SUB-HD-LREVO1 SAT-HD-R
REVO1 SAT-HD-L REVO1 SUB-HD-R
REVO1 SH
70
023
13
14
12
11
10
9
8
7
6
5
4
3
2
1 20.1
17.5
14.9
12.1
0.8
2.1
5
7.8
10.6
13.4
16.1
18.7
21.3
23.7
15
Front Panel
ENTERPREVPREV NEXT
ESC
MODE
CLIP
66
1212
1818
2424
A BINPUT LEVELINPUT LEVEL MUTE
CLIP
66
1212
2424
LIMIT
OUTPUTLEVEL
OUTPUTLEVEL
CLIP
66
1212
2424
LIMIT
CLIP
66
1212
2424
LIMIT
CLIP
66
1212
2424
LIMIT
CLIP
66
1212
2424
LIMIT
CLIP
66
1212
2424
LIMIT
OUTPUTLEVEL
OUTPUTLEVEL
OUTPUTLEVEL
OUTPUTLEVEL
OUTPUTLEVEL
OUTPUTLEVEL
OUTPUTLEVEL
OUTPUTLEVEL
OUTPUTLEVEL
OUTPUTLEVEL
MUTE MUTE MUTE MUTE MUTE
CARD
3-WAY STEREODIGITAL CROSSOVER
3-WAY STEREODIGITAL CROSSOVER
MAXIDRIVE3.4+MAXIDRIVE3.4+
1 2 3 4 5 6
EDIT
UTILITY
DELAY
PRESET
1
1
2
2
3
3
4
4
5
5
7
7
6
6
9
9
8
8
10
10
11
11
12
12
LEDsMODE Button Display
DIAL Knob PREV/NEXT Button
ENTER Key
Mute Switches
ESC key
Output Level LEDs
Memory Card Slot
Input Level LEDs
Navigation Cursor Keys
Rear Panel
AC Inlet and Fuse Holder
Apparaten skall anslutas tilljordat uttag nar den anslutstill ett natverk
PWR
OFF
ON
AC INPUT 14W95-240V 50/60HzFUSE: 95-120V T500mAL
210-240V T315mAL
DIGITAL IN RS485 OUT RS485 IN RS232 INPUT AINPUT B4 3 2 1
OUTPUTS
56
A102
DESIGNED IN ITALYMADE IN CHINA
2 13
NEW TIDE
PUSH
2 13
NEW TIDE
PUSH
1
3
2
NEW TIDE
PUSH
1
3
2
NEW TIDE
13
13
14
14
15
15
16
16
17
17
18
18
19
19
20
20
Power Switch
Rs485 OUT
Rs485 IN RS 232
Digital In
OUTPUTS INPUTS
12. CONTROL ELEMENTS: MAXIDRIVE3.4+ PROCESSOR
PUSH
16
Front Panel
Power Switch & Indicator LED
Signal LED
Clip LED
Protection LED
Gain Controls
Cooling Vents
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
OFF ON
LF 30HZFILTER
BRIDGED
CH1 CH2
CH3 CH4
OFF ON
LF 30HZFILTER
STEREO
PARALLEL
BRIDGED
BRIDGEDMONO
BRIDGEDMONO
OUTPUT
OUTPUT
CH3
CH1
CH4
CH2 CH1/CH2
CH3/CH4
CH11+
2+
1+
1
2
2+
BRIDGED
CH2
LOCK LOCK
CH31+
2+
1+
1
2
2+
BRIDGED
CH4
LOCK LOCK
BRIDGED
INPUT
STEREO
PARALLEL
BRIDGED
CH21+ 1
CH41+ 1
INPUT
SERIAL
MODEL
BREAKER
MADE IN CHINA
220 -240V ~50/60HzRated PowerConsumption 3000W
DESIGNED IN ITALY
PUSHPUSH
PUSHPUSH
Rear Panel
Circuit Breaker
IEC Socket for AC Power Cable
Combo Balanced Input Connectors
Speakon Outputs
Low Frequency Filter
Output Mode Selector
13. CONTROL ELEMENTS: D4 Amplifier
1
1
(dB)
12
16
1820
22
24
26
28
30
6
CH1 (dB)
12
16
1820
22
24
26
28
30
6
CH2 (dB)
12
16
1820
22
24
26
28
30
6
CH3 (dB)
12
16
1820
22
24
26
28
30
6
CH4
SIG CLIP PROT SIG CLIP PROT SIG CLIP PROT SIG CLIP PROT
2
2
3
3
4
4
5
5
6
6
D4750W 4
(dB)
12
16
1820
22
24
26
28
30
6
CH1 (dB)
12
16
1820
22
24
26
28
30
6
CH2 (dB)
12
16
1820
22
24
26
28
30
6
CH3 (dB)
12
16
1820
22
24
26
28
30
6
CH4
SIG CLIP PROT SIG CLIP PROT SIG CLIP PROT SIG CLIP PROT
Binding Post Outputs
Cooling Fan
To obtain Warranty Service, the buyer should first fill out and return the enclosed
Warranty Registration Card within 10 days of the Purchase Date.
All the information presented in this Warranty Registration Card gives the manufacturer a better
understanding of the sales status, so as to provide amore effective and efficient after-sales warranty
service. Please fill out all the information carefully and genuinely, miswriting or absence of this card will
void your warranty service.
2.1 In case of return for any warranty service, please make sure that the product is well packed in its
original shipping carton, and it can protect your unit from any other extra damage.
2.2 Please provide a copy of your sales receipt or other proof of purchase with the returned machine,
and give detail information about your return address and contact telephone number.
2.3 A brief description of the defect will be appreciated.
2.4 Please prepay all the costs involved in the return shipping, handling and insurance.
3.1 LTO warrants that this product will be free from any defects in materials and/or workmanship for
a period of 1 year from the purchase date if you have completed the Warranty Registration Card
in time.
3.2 The warranty service is only available to the original consumer, who purchased this product directly
from the retail dealer, and it can not be transferred.
3.3 During the warranty service, LTO may repair or replace this product at its own option at no
charge to you for parts or for labor in accordance with the right side of this limited warranty.
3.4 This warranty does not apply to the damages to this product that occurred as the following
conditions:
Instead of operating in accordance with the user's manual thoroughly, any abuse or misuse of this
product.
Normal tear and wear.
The product has been altered or modified in any way.
Damage which may have been caused either directly or indirectly by another product / force / etc.
Abnormal service or repairing by anyone other than the qualified personnel or technician.
And in such cases, all the expenses will be charged to the buyer.
3.5 In no event shall LTO be liable for any incidental or consequential damages.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so
the above exclusion or limitation may not apply to you.
3.6 This warranty gives you the specific rights, and these rights are compatible with the state laws,
you may also have other statutory rights that may vary from state to state.
1. WARRANTY REGISTRATION CARD
2. RETURN NOTICE
3. TERMS AND CONDITIONS
14. WARRANTY
17
c
All rights reserved to ALTO. All features and content might be changed
without prior notice. Any photocopy, translation, or reproduction of part of this
manual without written permission is forbidden. Copyright 2008 Seikaku Group
SEIKAKU TECHNICAL GROUP LIMITED
NO. 1, Lane 17, Sec. 2, Han Shi West Road, Taichung 40151, Taiwan
www.altoproaudio.com Tel: 886-4-22313737
email:[email protected] Fax: 886-4-22346757
NF03235-1.0