Embed Size (px)
Citation preview
water treatment systemsReverse Osmosis, Simplex 4040-S
Contact UsTel: +27-21-7885341/5342 | Fax: +27 (0)21 788 5386| Email: [email protected]
Web: www.aquamarinewater.co.za
The Aquamarine range of Reverse Os-mosis systems is a comprehensive range of standard and customised products developed and manufactured in South Africa on the basis of the well-known process of Reverse Osmosis which has been under constant development since the first experimental systems were introduced in the 1950’s. In general terms the process is a “reverse process” based on the natural osmotic pressure difference between two salt solutions on either side of a membrane, in which mechanical pressure is applied to the side with higher salinity.
The membranes through which the salt passes at relatively high pressure are a vital part of the system, separating the fresh water from the “salty” or undesired water.
All Aquamarine systems use high qual-ity “thin film composite” spiral wound membranes housed in fibreglass rein-forced plastic or FRP pressure vessels. All systems have the option of a dosing pump to dose one of the many AQM membrane anti-scaling chemicals that will be customised as per the feed wa-ter conditions.
All pumps and instrumentation is of top quality which is vital to ensure reliability and long service life, with a minimum of maintenance required.
Reverse Osmosis unit: Model: Simplex 4040-S
Contact UsTel: +27-21-7885341/5342 | Fax: +27 (0)21 788 5386 | Email: [email protected]
Web: www.aquamarinewater.co.za
The Simplex Auto range of units is a sim-ple, semi-automated range of units uti-lising the bare basics of components to produce the desired water quality. The Simplex Auto units are suited for appli-cations where the available budget is limited but operators still require a qual-ity semi-automated system.
All frame work is epoxy coated mild steel and interconnecting pipework and fittings are either CL16 PVC or stain-less steel for corrosion resistance.
All information shown on this data sheet is based on average conditions. All design information will be finalised based on feed water conditions and all system are sub-ject to modifications.
Reverse Osmosis unit: Model: Simplex 4040-S
Contact UsTel: +27-21-7885341/5342 | Fax: +27 (0)21 788 5386 | Email: [email protected]
Web: www.aquamarinewater.co.za
Technical Data 4040/1 4040/2 4040/3Permeate Flow Rate l/h 250 500 700Min Salt Rejection % 97 97 97Recovery % 75 75 75Operating Pressure bar 10-15bar 10-15bar 10-15barMembrane No 1 2 3Voltage V/Hz 1X220/50 1X220/50 1X220/50Feed Water Connection Inch ¾” Female ¾” Female ¾ ” FemalePermeate Water Connection mm ¾ ” Female ¾ ” Female ¾ ” FemaleBrine Water Connection mm ¾ ” Female ¾ ” Female ¾ ” FemaleDosage tank lts 100 100 100Min / Max inlet pressure bar 0.2/1 0.2/1 0.2/1Max ambient Temperature ºC 40 40 40Length mm 600 600 1400Width mm 600 600 600Height mm 1600 1600 1600
Weight approx. kg 100 110 120
Basic System Features:
• Frame: Mild steel epoxy coated. • Pre filtration: 2 x 20” Slimline as per feed water conditions. • Anti-Scaling dosing: dosing pump for AQM membrane anti-scaling chemical dosing. (optional)• Inlet Solenoid valve: ¾” Brass / Stainless Steel. • Feed Pump (optional): Full plastic or Stainless steel centrifugal type booster pump. (1.25kW)• High pressure pump: Brass vein pump. • Pressure Vessels: FRP pressure vessels / Stainless steel pressure vessels. • Membranes: Filmtec Membranes (model may vary depending on feed water conditions)• Pressure gauges: Inlet and operating. • Flow meter: Permeate• Electrical controls: Manual DOL stop/start. • Other: CIP connections for membrane cleaning. *Optional cleaning rig is recommended.
