Upload
buitram
View
253
Download
0
Embed Size (px)
Citation preview
www.cirrusresearch.co.uk
Acoustic House, Bridlington Road, Hunmanby, North Yorkshire YO14 0PH, United Kingdom
T: +44 1723 891655 E: [email protected]
Features
• Add-on processing module for the NoiseTools
software
• Calculation of RT60
, RT30
& RT20
from
measurement data using 1:1 & 1:3 octave bands
from an Optimus Sound Level Meter
• Supports Interrupted or Impulse noise source data
• Calculations in accordance with ISO 3382-2:2008
• Graphical & tabular data with measurement report
• Automatic detection of data quality & reliability of
the calculations
• Automatic calculation of measurement
uncertainty
• Average multiple measurements & adjust for
multiple sources
Overview
The Reverberation Time Module is an add-on for the
NoiseTools software that allows the calculation of RT20
,
RT30
and RT60
values from either interrupted or impulse
noise source data in accordance with EN ISO 3382-
2:20081.
Measurements can be made using either an interrupted
or impulse noise source and measured using an Optimus
Sound Level Meter.
The measured data is downloaded into the NoiseTools
software where the module calculates the required
values in accordance with EN ISO 3382-2:2008.
The calculations can be carried out using either a
single measurement or from a group of measurements,
allowing multiple samples to be combined, reducing
the measurement uncertainty.
Where multiple measurements are used, the module
will automatically calculate the average values across
all suitable data.
The calculated values are displayed both in graphical
and numerical form and a report can be produced.
The graphical and numerical data can be exported for
use in other programs or applications as required.
Reverberation Time Calculation Module for NoiseToolsCalculations in accordance with ISO 3382-2:2008
www.cirrusresearch.co.uk
Acoustic House, Bridlington Road, Hunmanby, North Yorkshire, YO14 0PH, United Kingdom
T: +44 1723 891655 E: [email protected]
RT Module Overview Sheet R2 EN
Supported Data Types
The module uses any suitable measurement from an Optimus where the time history sample rate is set to 62.5ms for
1:1 and 1:3 octave band data. 10ms sample data for LAeq, LCeq and LZeq is also supported where 1:1 or 1:3 octave
band data is also available.
The module will determine if the data is of sufficient quality to accurately calculate the RT20
and RT30
values according
to EN ISO 3382-2:20081. To calculate the reliability of the data source, the module uses BT>4 for impulse noise
sources and BT>16 for interrupted noise sources as defined in EN ISO 3382-2:2008.
The uncertainty of the measurement calculations is also calculated automatically and provided in the table and
measurement report.
Licensing & System Requirements
NoiseTools uses a licensing system that requires an Optimus Cloud account to be created and connected to the
NoiseTools installation. The module will be licensed to that Optimus Cloud account.
The module requires NoiseTools version 1.8 or later to be installed. The latest version of the NoiseTools software can
be downloaded from www.cirrusresearch.co.uk/library/software
Installation and operating instructions can be downloaded from the Cirrus Research website at www.cirrusresearch.
co.uk/library/manuals
Ordering Information
The NoiseTools Reverberation Time Module can be ordered using the product code SWNT-RT
1. EN ISO 3382-2 Acoustics - Measurement of room acoustic parameters - Part 2: Reverberation time in ordinary rooms (ISO 3382-2:2008)