Upload
phamkhuong
View
214
Download
2
Embed Size (px)
Citation preview
GENERAL TERMS & CONDITIONS
General Terms & Conditions 1.1
Installation 1.3
Warranty & Service 1.5
Forms 1.8
OPTIONS
Glass Options For Windows 2.1
Single Glass & Sealed Units 2.2
Window Accessories 2.3
Accessory Order Form 2.4
Window Components 2.5
BAYS & BOWS
Bays & Bow Windows 3.1
Bay Window Calculations 3.2
Bow Window Calculation 3.3
SHAPES
Window Shapes 4.1
Aluminum Grills for Shapes 4.2
Exterior & Interior 1/2 Jamb and Curved Sectional Moulding 4.4
Calculating Shape Costs 4.5
GRILLS
Grill System 5.1
Colonial Grills 5.2
Specialty Grills 5.3
Diamond Grills 5.4
CLIMATESHIELD PREMIUM
Casement 100M 6.1
Awning 150M 6.2
Fixed Casement 452 6.3
Picture 400 6.4
Double Hung 210C 6.5
Tilt Slider 300FH 6.6
Single Hung 201VS/201VSJ 6.7
Single Lift Slider 301VS/301VSJ 303VS/303VSJ 6.8
End Vent Tilt Slider 301VSEV/301VSEVJ 303VSEV/303VSEVJ 6.9
Fixed over Slider Lift Combo 301VSC 6.10
CLIMATESHIELD PLUS
Casement 100MR 7.1
Awning 150MR 7.2
Fixed Casement 452R 7.3
Picture 400R 7.4
Double Hung 240/240J 7.5
Tilt Slider 340/340J 7.6
Lift Out Slider 355 7.62
Single Hung 275/275NF 7.7
Single Lift Slider 375/375NF 7.8
End Vent Tilt Slider 375EV/375NFEV 7.9
CLIMATESHIELD ULTRA 800M
Casement, 850M Awning, 852 Fixed 8.1
PATIO DOORS
Patio Doors 9.1
Patio Door Accessories 9.2
GARDEN WINDOWS
Garden Windows 10.1
Garden Window 16”Projection Chart 10.2
Garden Window 24”& 30”Projection Chart 10.3
Garden Window Specifications 10.4
Garden Window Terms & Agreements 10.5
CONTENTSAmerican Version
Effective January 1, 2006
Updated May 24, 2007
VISIT OUR WEBSITE AT
www.vinylwindowdesigns.com
Email: [email protected]
Customer Service:
1-800-668-4820
1-905-850-3222
1.1
PRICESLIST PRICES, TERMS AND CONDITIONS contained hereinsupersede any and all prices, terms and conditions shown inprevious lists. PRICES ARE SUBJECT TO CHANGEWITHOUT NOTICE. Errors and omissions are subject tocorrection. All prices shown, unless otherwise indicated, arelist prices and subject to the discount agreed upon at thetime of ordering. Prices are subject to all applicable salestaxes, unless otherwise indicated. A MINIMUM CHARGE PERINVOICE IS $25.00. Please note, this charge will be strictlyenforced.
CREDITCredit will be extended only to established and approvedaccounts.Accounts will only be established for those companies whointend to purchase on an ongoing regular basis. All otherpurchases will be C.O.D.Normal credit checks take approximately two to three weeksand will not be initiated until an initial order is placed.Purchases made during this time will be C.O.D., unlessarrangements are made with our credit department BEFOREPLACING ORDERS.
PAYMENT TERMSTerms of payment for established credit accounts are:Net 30 Days from date of invoice unless otherwise stipulatedIN WRITING by Vinyl Window Designs Ltd. 2 1/2% interestper month (31.2% per annum) will be charged on all accountsover 30 days.
FAILURE TO FULFILL TERMSShould the Purchaser at any time fail to fulfill the terms ofpayment described under PAYMENT TERMS, or any specialpayment arrangements, Vinyl Window Designs may deferfurther shipments until such payments are made, or at itsoption, cancel any unshipped orders or back orders withoutprejudice to any right Vinyl Window Designs may have againstthe Purchaser. Vinyl Window Designs also reserves the rightto ask for and demand from the Purchaser, satisfactorysecurity for the due performance of the Purchaser’sobligations.
ORDERS FOR NON-STANDARD SIZE PRODUCTS must be accompanied by a 50% deposit, unless the accounthas been established by our credit department.ORDERS FOR CUSTOM SIZE PRODUCTS ARE NON-CANCELLABLE ONCE FABRICATION HAS BEGUN.
WARRANTY AND SERVICESee written warranty in force at time of ordering.
GLASS BREAKAGE OF ANY KIND IS NOT COVERED BYTHIS WARRANTY.
While Vinyl Window Designs Ltd. warrants its products, itcannot warrant installation by others. This warrantyaccordingly will be voided by any installation which doesnot comply fully with Vinyl Window Designs installationinstructions.
Any warranty problems must be reported by the selling dealerwithin the warranty period and on Vinyl Window DesignsService Report form. Warranty work will be rectified byreplacement or repairs as per the warranty in force. A properlycompleted Service Report will ensure prompt action on yourservice request. In no event shall Vinyl Window Designs Ltd.be liable for special, indirect, incidental or consequentialdamages.
Service work and inspection will be carried out on a “firstcome, first served” basis when reported in writing to ourservice department.A fee of $50.00/hr. will be charged for any inspectiondetermined not to be the responsibility of Vinyl WindowDesigns Ltd.Where parts and/or repairs not covered under warranty arerequired, terms will be payment upon completion of saidwork.
SHIPPINGAll prices shown are FOB Vinyl Window Designs plant inWoodbridge, Ontario, unless otherwise arranged. WhenShipping Instructions Have Not Been Specified, VinylWindow Designs Reserves the Right to Select the Routeand Method of Shipment.
Under no circumstances can shipments be sent by commoncarrier on a prepaid basis. Customers must establish theirown “Collect” credit arrangements with carriers servicing theirroutes. All common carrier shipments, either by thePurchaser’s request or Vinyl Window Designs Ltd’s option,are at the consignee’s risk of breakage and/or damage.Therefore All Claims for Breakage and/or Damage AreBetween the Carrier and the Consignee. All CommonCarrier shipments must be crated. A nominal charge will belevied for this service (see Packaging charges - this section)
When arrangements have been made to pick up productsfrom our warehouse, customers are requested to have theirtrucks properly equipped with ropes and cardboard, as wellas a glass rack. Our staff has been instructed to be as helpfulas possible at all times. We do, however, reserve the right torefuse to load customer’s vehicles that are not properlyequipped.
TIMES FOR PICK UP are between the hours of 8:00 am and4:30 p.m. Monday to Friday, unless specific arrangementsare made with the sales department. All products, eitherpicked-up or delivered, must be thoroughly inspectedbefore signing our shipping order. Your signature indicatesacceptance of the product and will exempt Vinyl WindowDesigns Ltd from any further liability with regards to brokenglass, paint scratches, screen tears etc, unless such is notedon the shipping order. All repair work will be done at currentprices.
GENERAL TERMS AND CONDITIONS
1.2
CLAIMSShortages must be reported to our office, along with allpertinent documents, within three (3) working days. Claims forbreakage of goods delivered by common carrier must beplaced against the carrier, with written notice given to ourhead office within three (3) working days.
RETURNSProducts cannot be returned for any reason without WrittenPrior authorisation and a copy of the Vinyl Windows ReturnAuthorisation Form (R.A.F). Customers bringing back productwithout the proper R.A.F will not have said product takenback, nor signed for, by any Vinyl Window Designs Ltdpersonnel, AND NO CREDIT WILL BE ISSUED.
Only Standard Size products are acceptable to be returned
Custom Size Windows and Doors Manufactured to theCustomers Specifications Are Non-Returnable Unless AFabrication Error Or Other Warranty Claim Has Necessitated AReplacement
All standard size products that are returned are subject to a20% handling charge.
PRODUCT CHANGEVinyl Window Designs Ltd products are constantly beingimproved. We reserve the right to change specifications anddesigns without notice. Vinyl Window Designs Ltd assumesno responsibility for your use of or reliance upon outdatedprinted matter and specifications.
PACKAGING CHARGESNormal crating will be done at a minimum charge of $50.00per crate. We will try to pack as many windows as possibleinto each crate, but reserve the right to make the finaldecision as to the number of crates required.
SHOP DRAWINGSShop Drawings, samples or special engineering work are notincluded in the enclosed price list, but will be charged for on aper job basis by quotation in writing, unless otherwisespecified.
QUALITY STANDARDSAll Vinyl Window Designs Ltd products are manufactured tostandard commercial tolerances and will include, at times,slight imperfections in paint, glass and other materials as wellas manufacturing tolerances. Any claims arising from suchimperfections or tolerances will be judged againstGovernment and C.S.A published specifications andaccepted or denied on the basis of such specifications. VinylWindow Designs Ltd Will At No Time Be Held Responsible forClaims Arising Between the Purchaser and His Customer.
ORDERS BY TELEPHONEAll orders taken over the telephone will be mailed to thecustomer to be confirmed. The customer must then mail theorder back to the VWD office before processing. If a customerwishes to continue ordering by phone, they will assume allresponsibility for any error made by either side.
GENERAL TERMS AND CONDITIONS (continued)
PRICING OF WINDOWS Round up to the next inch then round to the next 1/2 squarefoot.e.g. Required Size 28 1/8 x 44 1/4
Round to Inch 29 + 45 = 74 united in.
If the resulting united in. is in a range for the particular window(e.g. 70 - 74 UI) then the same range is used for calculatingcalculating options and extras. In some cases options mayrequire a sq. ft. calculation (29 x 45 = 1305/144 = 9 1/2 sq. ft.
PRICING OF SPECIAL SIZE PATIO DOORSSpecial Sizes for Patio Doors are priced by quotation only.
UNAVOIDABLE DELAYSVinyl Window Designs Ltd shall not be responsible for anydamages resulting from or delay due to strikes, fires,accidents, force majeure, inability to procure materials orother causes beyond it’s control and any such delay shall notbe grounds for cancellation of any contract by the customer.
COLLECTION COSTSIn the event that credit has been extended and payment hasnot been received within 30 DAYS after the term indicated inour Order-Invoice, collection costs may be assessed by VinylWindow Designs Ltd. By accepting any or all of themerchandise described in the Order-Invoice, the buyer agreesto assume any collection costs actually incurred as a result ofthe buyer’s default. Such charges will then become a part ofthe original billing.
DEPOSITSIt is expressly agreed that Vinyl Window Designs Ltd willremain the owner of the merchandise sold until full paymentof the purchase price. In the event that the customer fails toaccept delivery of the merchandise hereby ordered, then VinylWindow Designs Ltd shall have the right to retain any depositpaid by the Customer as damages, without prejudice to VinylWindow Designs Ltd’s rights to claim such further damagesas it may have suffered in the circumstances, or at it’s option,claim the entire amount of the purchase price.
SAMPLESWe encourage our dealers to purchase sample windows. Asan added incentive we offer an additional 20% discount onsamples.Hand samples & cross sections are made available at anominal cost of $75.00 net. Showroom stands are offered byVWD complete with VWD signage at a cost of $350.00 net perdisplay stand.
1.3
3
MEASURING AND ADJUSTMENTSWindows are manufactured to 1/8" in width & height. e.g. Width 27 1/8, 27 1/4 etc. Height 52 1/8, 52 1/4 etc.
Width: Measure between jambs at top, middle & bottom.Use the Smallest Measurement.
Height: Measure between outside sill, at stool and top ofwindow casing. Use The Smallest Measurement.
Overall depth of window is 3 1/4".
1
2
3
4
FIELD ADJUSTMENT PROCEDURE:ALUMA-TILT BALANCE
If for some reason your windows require adjustment, such as asash drooping, or hopping up from the sill, or if the spiral rod isdisengaged the adjustment is simple.
STEP #1: Tilt sash downward to expose the balance tilt shoe.Disengage the balance rod from the tilt shoe. Be careful not toallow the rod to “spin off” or disconnect from the tensioningrod. (See Diagram 1)
STEP #2: If sash is dropping, adjust the tension by rotating the balance clockwise. Apply tension to both sides equally. Do not exceed more than 2 full turns at a time. Reconnect therod to the tilt shoe. Reposition the sash and check operation.If additional tension is required, repeat the process until thesash holds in any position.
STEP #3: If the sash is hopping, less tension is required.Release the tension equally on both sides by allowing the
Tensioning tool to rotate counter clockwise for 1 or 2 full turns.Reconnect the rod to the pivot shoe. Reposition the sash andcheck operation. Repeat process if necessary.
STEP # 4: If the rod is disconnected from the pivot shoe,apply tension to both sides equally, not exceeding 4 full turnsat a time. (See Diagram 2)
IMPORTANTBefore tilting lower sash, make sure that sash israised at least 3" off sill.
1. Rotate rod slightlyto the right.
2. At the same timepull rod downward.
3. Slip rod awayfrom the pivitlock shoe.
Diagram #1
Diagram #2
End ofbalance tube
Pull rod downfor “knuckle”room
To tension, rotateclockwise
Measure width fromthese two points
Inside Trim
JambJamb
W
Inside trim
Jamb
Measureheight fromthese twopoints
W
Outside sill stool
Insidesill
2" approx.
2
1
1.4
CLIMATESHIELD BASIC INSTALLATION INSTRUCTIONS1
2
3
4
5
6
7
8
Before removing the old window please CHECK thefollowing:
• The new window is the Right Size
• The new window is what you ordered
• There is no visible damage or faults
It is easier to correct a problem before the window isinstalled in a customer’s home.
On Double Hung Windows over 36” High you will find anextra shipping strap at the centre of the window. Do NotRemove this Strap Until the Window is Shimmed inPlace This will prevent the Jambs from bowing out andallowing the pivot bars to “Jump” out of the shoes.
Make Sure All Openings Are Square and Plumb BeforeSetting Window in Place
Do Not Force the Window Into An Opening That is TooSmall.
• Sill must be level and properly supported
• Measure inside frame dimensions and shim accordinglyuntil dimensions are equal for widths and heights
• Make sure the window is set in place squarely
Pack both sides and head with either loose or rigidinsulation making sure all gaps and voids are filled.This is a must for Optimum Results.
Fasten the window securely through the jambs (and headon large windows) being careful not to tighten down onthe screw so hard that the frame is twisted out of shape.Never Drill Holes Through the Window Sills.
Before applying caulking or final trim, check the windowfor smooth operation and proper fit. If necessary adjustthe tension on double hung sash balances according toour catalogue instruction sheet.
Finishing Trim can now be completed in the usual manner.
REMEMBERIf it doesn’t fit, or you are not sure about something –STOP – and check with our office. A poorly installedwindow will result in an unsatisfactory job and nullificationof the SecurPlus warranty.
3/8"
3/8" 3/8"
3/8"
1. SET WINDOW IN PLACE WITH AT LEAST3/8 CLEARANCE ON BOTH JAMBS ANDTHE HEAD.
2. SHIM WINDOW JAMBS ON BOTH SIDESAND AT THE TOP CENTRE AND BOTTOMSO THAT THE JAMBS ARE GOOD.
GOOD
NOT GOOD
NOT GOOD
90°� 90°�
90°� 90°�
EQUAL
EQUAL�(ADJUST)
90°� 90°�
90°� 90°�
EQ
UA
L
EQ
UA
L
EQ
UA
L�
(AD
JUS
T)
1.5
WARRANTY & SERVICE WORK
Vinyl Window Designs is responsible for replacing, free of charge, any material which is defective, or whichdoes not conform to product specifications. It is most important that all products be thoroughly inspectedand checked for quality and conformance to that ordered prior to acceptance from Vinyl Window Designs andinstallation in the customer’s home. The cost of correcting a problem before installation is minimal comparedto the cost once the product has been installed.
The Dealer is responsible for the proper installation in the customer’s home. This installation should be donein a professional and workmanlike manner and includes the application of perimeter insulation and caulking toensure a weathertight and watertight installation. Should minor adjustments in the operation of the product berequired, it is the Dealer’s responsibility to make these on-site adjustments.
The Dealer is responsible for ensuring that he or his salesperson is fully familiar with the characteristics ofVinyl Window Designs’ products, so that in presenting his sales proposal to a potential buyer, he does notexaggerate or make misleading statements on the construction, performance or material content of theproduct.
The Dealer is responsible for fully checking out any complaint reported to him. The examination of thecomplaint involves an on-site inspection of the product and installation. Should the inspection reveal that aminor adjustment to the product is required, or that the installation is at fault, the Dealer is responsible formaking the necessary correction. Where the problem is one of faulty workmanship or material, that is notapparent at the time of acceptance of the product, it is Vinyl Window Designs’ responsibility to take thenecessary corrective action.
Service work will only be carried out upon receipt of a proper service request form that is 100% complete,with all information required.
In order to minimize the cost of service calls, and to eliminate those service requests which are not theresponsibility of Vinyl Window Designs, the following steps have been instituted:
A fee of $65.00/hr. will be enforced for any service calls where the problem is installation or productadjustment and is not deemed the responsibility of Vinyl Window Designs.
Service work will not be carried out where an account is not adhering to our payment terms.
GLASS BREAKAGE OF ANY KIND IS NOT COVERED UNDER WARRANTY
We are certain that you will acknowledge the need for these measures, and that you will take necessary steps tominimize unwarranted service work, which is costly to both your enterprise and ours.
1
2
3
4
5
6
7
PLEASE READ A COPY OF THE WRITTEN WARRANTY IN FORCE.
Vinyl Window Designs Limited takes pride in producing a top quality product and supporting our Dealers withpost-sale service.
War
rant
yC
ertif
icat
eVa
lidat
ion
Life
timeW
indo
wW
arra
nty
(Lim
ited)
Life
timeW
indo
wW
arra
nty
(Lim
ited)
All
viny
lwin
dow
sm
anuf
actu
red
byV
inyl
Win
dow
Des
igns
Ltd.
(”V
WD
”)ar
ew
arra
nted
agai
nstd
efec
tsin
mat
eria
lsan
dw
orkm
ansh
ip,o
ccur
ring
asa
dire
ctre
sult
ofth
em
anuf
actu
ring
proc
ess.
The
follo
win
gw
indo
wpa
rts
and
com
pone
nts
are
cove
red
durin
gth
est
ated
perio
d,un
der
norm
alus
ean
dse
rvic
esu
bjec
tto
the
term
san
dco
nditi
ons
cont
aine
din
this
limite
dw
arra
nty.
LIF
ET
IME
ON
INS
UL
AT
ING
GL
AS
S
GE
NE
RA
LC
ON
DIT
ION
SP
RO
DU
CT
US
E
LIM
ITE
DW
AR
RA
NT
YL
IMIT
AT
ION
S
RE
PL
AC
EM
EN
TP
AR
TS
OR
RE
PA
IRS
LIF
ET
IME
ON
VIN
YL
LIF
ET
IME
ON
TR
UT
HH
AR
DW
AR
E
Vin
ylW
indo
wD
esig
nsw
arra
nts
that
your
Inte
rcep
t,S
tain
less
,and
Tem
pSm
arta
ndIN
EX
insu
latin
ggl
ass
units
cont
aine
din
the
win
dow
sw
illco
nfor
mto
the
Fed
eral
spec
ifica
tion
for
insu
latin
ggl
ass
units
fabr
icat
edfr
omse
lect
Aqu
ality
glas
san
dth
atun
dern
orm
alco
nditi
ons
ther
ew
illno
tbe
anob
viou
sob
stru
ctio
nof
visi
onw
hich
isth
ere
sult
offil
mfo
rmat
ion
ordu
stco
llect
ion
betw
een
the
inte
rior
glas
ssu
rfac
esfo
ras
long
asyo
uow
nyo
urho
me
inac
cord
ance
with
allt
erm
ssp
ecifi
edin
this
war
rant
y.W
arra
nty
onan
yot
hers
pace
rsys
tem
sar
elim
ited
tofiv
e(5
)yea
rs.
The
Lim
ited
Life
time
War
rant
yst
ipul
ated
inth
isdo
cum
enti
sth
eon
lyw
arra
nty
appl
icab
leto
the
viny
lw
indo
ws
man
ufac
ture
dby
VW
D.T
his
Lim
ited
War
rant
yis
inlie
uof
all
othe
rw
arra
ntie
s,lia
bilit
ies
and
oblig
atio
nsof
VW
D,o
ralo
rw
ritte
n,ex
pres
sed
orst
atut
ory.
Impl
ied
war
rant
ies
ofm
erch
anta
bilit
yan
dfit
ness
for
apa
rtic
ular
purp
ose
are
limite
dto
the
dura
tion
ofth
isLi
mite
dW
arra
nty,
exce
ptas
may
beot
herw
ise
acco
rded
byla
w.T
oth
eex
tent
perm
itted
byla
w,V
WD
shal
lnot
belia
ble
forc
onse
quen
tiald
amag
esof
any
kind
,inc
ludi
ng,b
utno
tlim
ited
to,a
nyda
mag
eto
the
build
ing,
itsco
nten
tsor
any
pers
onth
erei
n,in
conv
enie
nce
oran
yot
herc
oste
xcep
tas
spec
ifica
llyse
tfor
thhe
rein
.No
repr
esen
tativ
eof
VW
Dor
itsdi
strib
utor
sor
cont
ract
ors
isau
thor
ized
tom
ake
any
chan
gein
orm
odifi
catio
nto
this
war
rant
y.
Thi
sLi
mite
dW
arra
nty
appl
ies
only
inre
spec
tofV
WD
viny
lw
indo
wpr
oduc
tsus
edin
norm
alre
side
ntia
lapp
licat
ions
inC
anad
aor
inth
eU
nite
dS
tate
san
dst
rictly
fort
hepu
rpos
esfo
rwhi
chth
eyar
ein
tend
edan
din
resp
ecto
fthe
build
ing
inw
hich
they
wer
eor
igin
ally
inst
alle
d.T
his
war
rant
yis
exte
nded
toth
eor
igin
alow
ner
for
his
resi
dent
ial,
sing
ledw
ellin
gon
ly.
Itis
nota
pplic
able
toco
ndom
iniu
ms,
rent
al,
com
mer
cial
orin
stitu
tiona
lpro
pert
ies
whi
char
elim
ited
toa
five
year
war
rant
yon
allc
ompo
nent
s.
VW
D’s
liabi
lity
here
unde
ris
limite
dso
lely
and
excl
usiv
ely
tore
pair
orre
plac
emen
t,at
the
optio
nof
VW
D,o
fthe
defe
ctiv
eV
WD
viny
lwin
dow
prod
ucta
ndV
WD
will
notb
elia
ble
fora
nyla
bour
orin
stal
latio
nco
sts.
All
part
sar
eF.
O.B
.Woo
dbrid
ge,O
Nor
the
clos
esta
utho
rized
VW
DD
eale
r/D
istr
ibut
or.T
his
war
rant
yis
toth
eor
igin
alow
nera
ndis
inef
fect
aslo
ngas
you
own
your
hom
e.A
port
ion
ofth
isw
arra
nty
can
betr
ansf
erre
dto
ane
wow
nerp
rovi
ded
that
VW
Dre
ceiv
esw
ritte
nno
tific
atio
nof
the
chan
gein
owne
rshi
pan
d$1
50.0
0tr
ansf
erfe
ew
ithin
30da
ysof
the
prop
erty
chan
ging
owne
rshi
pel
seth
ew
arra
nty
ceas
esto
bein
effe
ct.A
tran
sfer
red
war
rant
yis
limite
dto
ape
riod
of10
(ten
)yea
rsfr
omth
eda
teof
orig
inal
purc
hase
ofth
ew
indo
ws.
VW
Dre
serv
esth
erig
htto
disc
ontin
ueor
chan
gean
yde
sign
orm
etho
dof
man
ufac
ture
.If
VW
Dag
rees
tom
ake
are
plac
emen
tund
erth
ete
rms
ofth
isLi
mite
dW
arra
nty
and
anex
actr
epla
cem
entp
arti
sno
tava
ilabl
e,V
WD
rese
rves
the
right
tosu
bstit
ute
apa
rtor
part
sof
equa
lor
supe
rior
qual
ityat
itsso
ledi
scre
tion.
The
war
rant
ype
riod
inre
spec
tof
any
VW
Dvi
nylw
indo
wpr
oduc
tins
talle
dpu
rsua
ntto
this
Lim
ited
War
rant
ysh
allb
eeq
ualt
oth
ere
mai
nder
ofth
ew
arra
nty
perio
dap
plic
able
toth
eV
WD
viny
lwin
dow
prod
ucto
rigin
ally
inst
alle
d.
VW
Dw
arra
nts
the
VW
Dvi
nyl
fram
esan
dsa
shes
shal
lbe
free
from
defe
cts
inno
rmal
mat
eria
land
wor
kman
ship
that
resu
ltin
blis
terin
g,pe
elin
g,fla
king
orco
rrod
ing
ofth
evi
nyl
win
dow
fram
eor
viny
lwin
dow
sash
mem
bers
,exc
ludi
ngpa
inte
dw
indo
ws
whi
char
elim
ited
toa
ten
(10)
year
war
rant
y.(S
eeV
WD
Ext
erio
rCol
ourW
arra
nty
ford
etai
ls.)
VW
Dw
arra
nts
that
Trut
hO
pera
tors
and
Mul
tipoi
ntLo
cks
shal
lpr
oper
lype
rfor
mth
eir
func
tions
fort
helif
eof
the
win
dow
.Ultr
aS
cree
nha
rdw
are
and
othe
rhar
dwar
eis
war
rant
edfo
rten
(10)
year
sfr
omda
teof
purc
hase
.Scr
een
mes
his
notw
arra
nted
agai
nstn
orm
alw
ear
orte
ars.
Sta
inin
gA
gent
Cle
anin
gA
gent
prep
arat
ion
Pro
cedu
reLi
ghto
ilsan
dgr
ease
sS
olve
nts:
-R
emov
eex
cess
dirt
and
debr
isw
ithU
seso
ftcl
oth
toap
ply.
Avo
idpo
lishi
ngst
aine
dar
eaby
usin
gto
oH
eavy
grea
seM
iner
alsp
irits
plas
ticor
woo
den
scra
per
(non
met
al)
muc
hpr
essu
re.A
fter
rem
ovin
gst
ain,
rinse
wel
lwith
wat
er.
Cau
lkin
gco
mpo
und
V.M
.P.N
apht
haW
ax,c
rayo
n,as
phal
t,ta
rs,e
tc.
Aut
ota
rre
mov
er
Inks
(mar
king
)C
lean
ing
fluid
Rem
ove
exce
ssdi
rtan
dde
pris
with
Use
soft
clot
hto
appl
y.A
void
polis
hing
stai
ned
area
byus
ing
too
Nai
lpol
ish
(Tric
hlor
oeth
ylen
e)pl
astic
orw
oode
nsc
rape
r(n
onm
etal
).m
uch
pres
sure
.Afte
rre
mov
ing
stai
n,rin
sew
ellw
ithw
ater
.P
aint
,gum
,lip
stic
kC
hill
gum
tore
mov
eex
cess
.
Rus
tsta
ins
Oxa
licA
cid
-M
ake
solu
tion
of1
tabl
espo
onof
oxal
icA
pply
solu
tion
with
soft
bris
tlebr
ush.
Wip
ew
ithda
mp
clot
hth
enA
uto
radi
ator
clea
ner
acid
to1
cup
war
mw
ater
.flu
shw
ithru
st-f
ree
wat
er.(
Use
rubb
ergl
oves
and
prot
ecte
yes
and
face
).
Stu
bbor
nst
ains
Xyl
ene
Try
the
abov
epr
oced
ures
(1-3
)fir
st.
Dam
pen
smal
lare
aof
aso
ftcl
oth
with
Xyl
ene
and
rub
vigo
rous
ly.
Try
this
proc
edur
eon
lyif
they
fail.
Do
notr
emov
ean
ym
ore
mat
eria
ltha
nne
cess
ary.
Rin
seth
orou
ghly
with
wat
er.
G.A
nyw
indo
wth
atha
sbe
enre
paire
d,m
odifi
edor
tam
pere
dw
ithby
any
pers
onot
her
than
adu
lyau
thor
ized
repr
esen
tativ
eof
VW
D.
H.C
onde
nsat
ion
onth
ew
indo
ws,
that
may
occu
ras
the
natu
ralr
esul
tofh
umid
ityw
ithin
the
hous
eor
build
ing
area
and
chan
ges
inth
eou
tsid
ete
mpe
ratu
re,d
oes
noti
ndic
ate
am
anuf
actu
ring
defe
ctan
dit
isno
tcov
ered
unde
rth
isLi
mite
dW
arra
nty.
Thi
sco
uld
resu
ltin
prem
atur
ese
alfa
ilure
that
void
sth
ew
arra
nty.
I.W
indo
wsi
zes
that
dono
tfal
lwith
inth
em
inim
uman
dm
axim
umdi
men
sion
sof
VW
D’s
stan
dard
prod
uct
offe
ring,
aspu
blis
hed.
Inth
eev
ent
that
VW
D's
oblig
atio
nun
der
this
Lim
ited
War
rant
yis
soug
ht,
the
Ow
ner
mus
tno
tify
the
Dea
ler/
Dis
trib
utor
inw
ritin
gby
regi
ster
edm
aila
ndw
ithin
thirt
y(3
0)da
ysaf
tert
hede
fect
has
first
appe
ared
.S
uch
notif
icat
ion
mus
tcon
tain
the
follo
win
g:a)
Nam
e,A
ddre
ssan
dph
one
num
ber(
s)of
the
Ow
ner.
b)D
ate
ofin
stal
latio
nan
dIn
voic
eN
umbe
rc)
Your
VW
Dw
arra
nty
card
incl
udin
gyo
urre
gist
ratio
nnu
mbe
r.c)
Ade
taile
dde
scrip
tion
ofth
ede
fect
for
whi
chth
ew
arra
nty
isre
ques
ted.
VW
Dre
serv
esth
erig
htto
exam
ine
the
win
dow
and
inst
alla
tion
inre
spec
tofw
hich
acl
aim
isbe
ing
mad
ein
orde
rto
dete
rmin
eth
eva
lidity
ofan
ysu
chcl
aim
prio
rto
bein
glia
ble
unde
rthi
sw
arra
nty.
Upo
nre
ceip
toft
his
info
rmat
ion,
the
Dea
ler/
Dis
trib
utor
will
notif
yth
eO
wne
rofh
issh
are
ofco
sts
(whe
resu
chis
appl
icab
le).
No
repa
iror
repl
acem
entp
arts
will
bepr
ovid
edun
tilV
inyl
Win
dow
Des
igns
Ltd.
has
rece
ived
the
Ow
ner's
paym
ento
fOw
ner’s
shar
eof
cost
s.T
heD
eale
r/D
istr
ibut
orw
illpr
ovid
ere
pair
orre
plac
emen
tpa
rts
toth
eO
wne
rupo
nre
ceip
toft
heO
wne
r'spa
ymen
t.
EX
CL
US
ION
SF
RO
ML
IMIT
ED
WA
RR
AN
TY
CO
VE
RA
GE
Thi
sLi
mite
dW
arra
nty
does
nota
pply
toan
dV
WD
shal
lnot
belia
ble
for
any
failu
re,d
efec
tor
dam
age
resu
lting
from
orin
conn
ectio
nw
ithan
yof
the
follo
win
g.
A.N
orm
alw
eath
erin
gan
dex
posu
reto
harm
fulc
hem
ical
s,ai
rpo
lluta
nts
and
atm
osph
eric
cond
ition
sm
ayca
use
allv
inyl
togr
adua
llyfa
de,c
halk
orsu
ffer
anac
cum
ulat
ion
ofsu
rfac
edi
rtor
stai
ns.T
hese
are
norm
aloc
curr
ence
san
dar
eno
tcov
ered
unde
rth
isLi
mite
dW
arra
nty.
B.A
nyde
fect
,mal
func
tion
orfa
ilure
tope
rfor
mth
atha
soc
curr
edbe
caus
eof
unre
ason
able
use,
impr
oper
inst
alla
tion
orfa
ilure
tope
rfor
mre
ason
able
orne
cess
ary
clea
ning
and
mai
nten
ance
(see
sect
ion
entit
led
“Win
dow
Mai
nten
ance
”).
C.A
nyda
mag
eto
the
win
dow
orco
mpo
nent
sof
the
win
dow
caus
edby
settl
emen
tor
stru
ctur
alde
fect
sof
the
build
ing
inw
hich
they
are
inst
alle
d.
D.A
nyda
mag
eca
used
byw
ind,
hail,
light
ning
orot
her
acts
ofG
od,i
nten
tiona
lact
,acc
iden
t,ne
glig
ence
orex
posu
reto
harm
fulc
hem
ical
sor
pollu
tant
s,in
clud
ing
the
use
ofha
rmfu
lcle
anin
gso
lven
tsor
abra
sive
s.A
nyda
mag
eca
used
bypa
intin
gor
coat
ing
ofvi
nylc
ompo
nent
sno
tapp
rove
dby
VW
Din
writ
ing
asbe
ing
appr
oved
.
E.D
efec
tsor
brea
kage
ofa
prod
ucto
rpr
oduc
tcom
pone
ntre
sulti
ngfr
omex
cess
ive
ther
mal
orph
ysic
alst
ress
incl
udin
g,bu
tnot
limite
dto
,bro
ken
glas
sor
torn
scre
ens.
F.D
amag
eca
used
byim
prop
erha
ndlin
gor
inst
alla
tion.
Win
do
wM
ain
ten
an
ce
Ext
erio
rsu
rfac
esw
illbe
expo
sed
toai
rbor
nedi
rtan
dpo
llutio
n.N
orm
alra
infa
llm
aybe
suffi
cien
tto
rem
ove
surf
ace
accu
mul
atio
ns.T
ore
mov
em
ore
stub
born
depo
sits
use
aliq
uid
solu
tion
ofm
ildho
useh
old
soap
appl
ied
with
asp
onge
tow
ipe
dow
nsa
shan
dfr
ame
com
pone
nts.
Cau
tion:
Nev
erus
eab
rasi
vecl
eani
ngag
ents
,pai
ntre
mov
ers
orso
lven
tsto
clea
nvi
nylc
ompo
nent
s.W
hen
usin
gan
ycl
eane
rot
her
than
wat
er,b
ece
rtai
nto
follo
wth
em
anuf
actu
rer’s
dire
ctio
nsex
actly
.Use
pers
onal
prot
ectio
neq
uipm
enta
ndpr
otec
tshr
ubs
and
adja
cent
sidi
ngfr
omdi
rect
cont
actw
ithcl
eani
ngag
ents
.
Ifst
ubbo
rnst
ains
exis
t,us
eth
efo
llow
ing
char
tfor
clea
ning
proc
edur
es:
Your
win
dow
sm
anuf
actu
red
byV
inyl
Win
dow
Des
igns
Ltd.
(VW
D)
utili
zepr
emiu
man
dpa
ints
inor
dert
opr
ovid
eyo
uw
ithye
ars
ofsa
tisfa
ctio
nw
ithou
rpr
oduc
ts.
VW
Dof
fers
you
the
follo
win
gun
mat
ched
war
rant
yon
our
co-e
xtru
ded
and
pain
ted
win
dow
prod
ucts
.
All
colo
ured
exte
riors
urfa
ces
are
war
rant
edno
tto
peel
,cra
ck,c
hip
orse
para
tefr
omth
evi
nylw
indo
wm
ater
ialf
orth
edu
ratio
nof
this
ten
(10)
year
war
rant
y.
Thi
sw
arra
nty
islim
ited
tore
finis
hing
,re
pair
orre
plac
emen
t,of
prod
ucts
foun
dto
bede
fect
ive
unde
rthe
term
sof
this
war
rant
y.V
WD
rese
rves
the
excl
usiv
erig
htto
dete
rmin
eth
eap
prop
riate
met
hod
for
brin
ging
prod
ucts
into
com
plia
nce
with
this
war
rant
y.V
WD
shal
lnot
pigm
ents
All
colo
ured
surf
aces
are
war
rant
edag
ains
tund
uefa
defo
rape
riod
ofte
n(1
0)ye
ars.
Thi
sw
arra
nty
utili
zes
the
NC
CA
Sta
ndar
das
anin
dust
ryac
cept
edm
easu
rem
ent
ofno
rmal
wea
ther
ing.
The
visi
ble
colo
urof
your
win
dow
sar
ew
arra
nted
tore
mai
nw
ithin
the
limits
assp
ecifi
edin
this
war
rant
y.
All
prod
ucts
expo
sed
tosu
nlig
htan
dot
here
lem
ents
can
beex
pect
edto
show
visi
ble
sign
sof
norm
alw
ear.
For
the
purp
oses
ofth
isw
arra
nty,
norm
alw
ears
hall
beco
nsid
ered
tobe
aco
lour
dete
riora
tion
ofon
ein
the
first
year
ofth
isw
arra
nty
and
one
addi
tiona
lfo
rea
chne
wye
arst
arte
dfo
rthe
dura
tion
ofth
ete
n(1
0)ye
arw
arra
nty.
C
CCE
EE
EX
TE
RIO
R
CO
LO
UR
TE
NY
EA
R
WA
RR
AN
TY
EX
TE
RIO
R
CO
LO
UR
TE
NY
EA
R
WA
RR
AN
TY
Un
iqu
eV
WD
nu
mb
er
behe
ldlia
ble
fora
nyco
sts
asso
ciat
edw
ithla
bour
orin
stal
latio
nof
the
prod
uct.
All
repl
acem
entp
arts
are
F.O
.B.W
oodb
ridge
,Ont
ario
Can
ada.
The
ten
(10)
year
Ext
erio
rC
olou
rW
arra
nty
stip
ulat
edin
this
docu
men
tis
the
only
war
rant
yap
plic
able
toth
eex
terio
rsur
face
ofvi
nylw
indo
ws
man
ufac
ture
dby
VW
D.T
his
Lim
ited
War
rant
yis
inlie
uof
allo
ther
war
rant
ies,
liabi
litie
san
dob
ligat
ions
ofV
WD
,ora
lor
wri
tte
n,
exp
ress
ed
or
sta
tuto
ry.
Imp
lied
wa
rra
ntie
so
fm
erch
anta
bilit
yan
dfit
ness
for
apa
rtic
ular
purp
ose
are
limite
dto
the
dura
tion
ofth
isLi
mite
dW
arra
nty,
exce
ptas
may
beot
herw
ise
acco
rded
byla
w.T
oth
eex
tent
perm
itted
byla
w,V
WD
shal
lnot
belia
ble
for
cons
eque
ntia
lda
mag
esof
any
kind
,in
clud
ing,
but
not
limite
dto
,any
dam
age
toth
ebu
ildin
g,its
cont
ents
oran
ype
rson
ther
ein,
inco
nven
ienc
eor
any
othe
rcos
texc
epta
ssp
ecifi
cally
set
fort
hhe
rein
.N
ore
pres
enta
tive
ofV
WD
orits
dist
ribut
ors
orco
ntra
ctor
sis
auth
oriz
edto
mak
ean
ych
ange
inor
mod
ifica
tion
toth
isw
arra
nty.
1.71
WIN
DO
W O
RD
ER
FO
RM
300 C
HR
ISLE
A R
OA
D, W
OO
DB
RID
GE
, O
NTA
RIO
L4L 8
A8
PH
ON
E:
(905)
850-3
222
FA
X:
(905)
850-9
940
(8
00)
668-4
820
(800)
565-5
292
O P E R A T O R
S P L I T
O R I E L BOT
LARG
E
C O T T A G E TOP
LARG
E
I N S I D E
O U T S I D E
C L E A R
L O W E
A R G O N
F R O S T
O T H E R
S C R E E N
I N T E R C E P T
I N E X
T E M P S M A R T
A S S E M B L E D
I N S I D E P R O J E C T I O N
10/1
545
/30
D E G R E E
NA
IL F
IN –
NF
J FI
N –
JF
BR
ICK
MO
ULD
– B
M
7
/8"
Reg
ular
Ext
ensi
on
2"
Larg
e, 2
" R
eno
3 1
/2"
Ext
ra L
arg
e
DR
YW
ALL
RE
TU
RN
– D
R
1
/2"
•
5/8"
•
3/4
"
RO
SE
TT
E P
KG
– R
OS
PK
G
(INC
. 3”
Jam
b E
xt.)
ALU
M –
AD
IST
INC
T
BR
AS
S -
DB
PR
AIR
E
GR
ILLS
– P
GP
EN
CIL
D
EC
OR
AT
IVE
G
RIL
LS –
PD
GC
ON
TO
UR
– C
ON
E IN
CH
ALM
N –
1”
WIN
DO
W S
PLI
T
EQUA
L –
EQ
1/4
1/2
1/4
– Q
HQ
SOLI
D CO
LOUR
OPT
IONS
BRIG
HT W
HITE
– W
143
AN
TIQU
E W
HITE
– W
137
GLA
SS
OP
TIO
NS
SYCA
MOR
E TO
P –
STSY
CAM
ORE
BOTT
OM –
SB
FROS
TED
TOP
– FT
FROS
TED
BOTT
OM –
FB
FULL
FRO
ST –
FF
SC
RE
EN
SFU
LL S
CREE
N –
FSHA
LF S
CREE
N –
HSNO
SCR
EEN
– NS
WIN
DO
W S
IZE
CO
LOU
RG
LAS
S O
PT
ION
SA
CC
ES
SO
RIE
SS
PAC
ER
GR
ILLS
BA
Y/B
OW
SE
RIE
SQ
TY.
WID
TH
HE
IGH
T
TH
E A
BO
VE
PR
OD
UC
TS
AR
E T
O B
E S
UP
PLI
ED
IN
TH
E M
AN
NE
R A
ND
TE
RM
S A
S
IND
ICA
TE
D.
Sig
natu
re
Dat
e
VIE
WE
D F
RO
M
OU
TS
IDE
BA
Y/B
OW
AS
SE
MB
LYGO
OD (O
NE S
IDE)
– G
1SW
HITE
LAM
INAT
E –
WL
OAK
– OA
KPI
NE –
PBI
RCH
- B
4 M I L
S Y C A M O R E
W I N D O W S I Z E
B R I C K T O B R I C K
TAG
CH
EC
K
ON
E
YES
NO
EX
TE
NS
ION
S
VIN
YL
WO
OD
1 3/
8 IN
DICA
TE O
VERA
LL
2"
SIZE
NEE
DED
IN3
3/8
“ACC
ESSO
RIES
” CO
LUM
N
FOAM
EXT
ENSI
ON (M
AX 5
1/4
")
LOW
E O
PT
ION
S
* HA
RDCO
AT
(SOL
AR G
AIN)
* SO
FTCO
AT
(SOL
AR S
HIEL
D)
• E
CLEA
N
EXTE
RIOR
COL
OUR
OPTI
ONS
IVOR
Y –
IBR
OWN
– B
SAND
ALW
OOD
– S
TERR
A -
T
PEBB
LE -
PIV
Y GR
EEN
- IG
WED
GEW
OOD
BLUE
-W
BGR
EY -
G
LUAN
MAH
OGAN
Y -
LMDA
RK M
AHOG
ANY
- DM
INSU
LATE
D -
I
YES
NO
S K Y H O O K S
NOTE
S:
Cust
omer
W
ork
Orde
r
P.O.
Ta
g
Orde
rDat
e
Req’
dDa
te
Pag
e
of
TILT
– D
OUB
LE &
SIN
GLE
HUN
G
TILT
– D
OUB
LE &
SIN
GLE
SLID
ER
CASE
MEN
T AWNI
NG
CR
100M
R-R
100M
-R
CL
100M
R-L
100M
-L
KF
452
SF
402
300F
H D
OU
BLE
SS
TLV
301V
S/V
SJ
SIN
GLE
SG
TLV
303V
S S
ING
LE S
GT
LV37
5/37
5NF
SIN
GL
E S
GT
LVLV
= L
EFT
VE
NT
300F
H D
OU
BLE
SS
TR
V30
1VS
/VS
J S
GT
RV
303V
S S
GT
RV
375/
375N
F S
ING
LE
SG
TR
VR
V =
RIG
HT
VE
NT
301V
S/V
SJE
VQ
303V
SE
VQ
375/
375N
FE
VQ
Q =
1/4
1/2
1/4
SF
402
301V
S/V
SJE
VT
303V
SE
VT
375/
375N
FE
VT
T =
1/3
1/3
1/3
301V
S/V
SJC
L30
3VS
CL
LEFT
VE
NT
301V
S/V
SJC
R30
3VS
CR
RIG
HT
VE
NT
SH
201V
S/V
SJ
275/
275N
F
DH
210C
240/
240J
SF
402
452/
150M
KF/
AW
Cas
emen
t Fix
Ove
r A
wni
ng
402/
150M
SF/
AW
Slim
Fix
Ove
r A
wni
ng
AW
150M
/150
MR
Cas
emen
tFi
xS
lim Fix
Slim Fix
Slim Fix
Slim Fix
Slim Fix
1/3
1/3
1/3
1/4
1/2
1/4
M =
MU
LTI P
OIN
T
1.9
ACCESSORY ORDER FORM
Jamb Extension Window Frame
A B
C
E
D
F G
ORDERING INFORMATION FOR WINDOWS WITH BRICKMOLD AND/OR JAMB EXTENSIONSPlease indicate key information for each order or window requiring a specific dimension. If you choose to order by thepart, accessories will be provided at our standard dimensions and we will not have the opportunity to assist you withyour order.
P.O. Item (If not whole order) VWD number
A.Jamb Extension Depth only
D.Exterior Projection from Accessory
G.Brick Mold (or other accessory) size
B.Window Frame Only
E.Overall Jamb Depth includingBrick Mold (or other ExteriorAccessory
C.Overall Jamb from Nail Fin
F.Contribution to width of Brick Mold(or other exterior accessory)
NOTE: A variety of charts with different accessories are available by request from customer service.
1.10
Qty. StyleSizeWidth x Height
Proj.ExtraRoofVent
ExteriorColour
ShelfSideCasements
Low ELow EArgon
Other
“A” ALL FIXED “B” SINGLE VENT “C” SINGLE VENT “D” SINGLE VENT “E” SINGLE VENT “F” SINGLE VENT
STYLE:
COMMENTS:
Standard Projection: 16”, 24” and 30” Standard Slope: 30 DegreesStandard Spacer: AluminumStandard Colour: White #136Standard Exterior Colours: Cream, Sandalwood and Chocolate BrownMaximum Width Sizes: Style “A” - 50”
Style “B” - 48”Style “C” - 72”Style “D” - 81”Style “E” - 81”Style “F” - 81”
Signature Date
Dealer: P.O.Number:
Tag:
Date: Date Required:
WINDOWS
ORDER FORM
1.11
The above product are to be supplied in the manner and terms indicated.
GLASS OPTIONS FOR WINDOWS
2.1 20OC06
Low E (Hardcoat or Softcoat)
Low E Argon (Hardcoat or Softcoat)
KeepsafeTM 1 side
Obscure/Frosted
Sycamore
Grey or Bronze
Triple Glaze2
Triple Glaze 1 Low E2
Triple Glaze 2 Low E2
Triple Glaze 2 Low E Argon2
GPW Wire Glass
Tempered 1 side
Tempered 2 side
Dual Seal Inex Spacer1
5
TempSmartTM Spacer System3 4
26.18 28.23 30.27 32.31 34.36 36.40 38.44 40.49 0.41
37.40 40.32 43.24 46.17 49.08 52.00 54.93 57.85 0.59
167.34 180.41 193.48 206.56 219.63 232.68 245.78 258.85 2.61
18.70 20.16 21.63 23.08 24.54 26.00 27.47 40.06 0.30
29.92 32.25 34.59 36.93 39.27 42.07 43.94 46.28 0.47
26.18 28.23 30.27 32.31 34.36 36.40 38.45 40.49 0.41
52.71 56.83 60.95 65.07 69.18 73.30 77.42 81.54 0.82
67.78 80.23 92.68 105.11 117.57 130.00 181.43 154.90 1.24
93.96 108.45 122.95 137.42 151.92 166.39 219.87 195.39 1.65
116.29 125.38 134.46 143.54 152.63 161.70 170.79 179.88 1.83
148.32 159.93 171.54 205.33 194.67 206.22 217.88 229.42 2.34
89.75 96.76 103.78 110.79 117.80 124.81 131.82 138.84 1.40
119.67 129.02 138.37 147.72 157.07 166.42 175.76 185.13 1.87
37.40 40.32 43.24 46.17 49.08 52.01 54.93 57.85 0.59
18.70 20.16 21.63 23.08 24.54 26.00 27.47 28.93 0.29
Krypton Argon Mix (10% Krypton)
E-Clean Glass with Argon
Krypton3
88.19 95.08 101.97 108.86 115.75 122.64 130.91 136.42 1.38
19.94 21.50 23.06 24.62 26.18 27.74 29.29 30.85 0.31
64.11 69.12 74.13 79.13 84.14 89.15 94.16 99.17 1.00
The United Inch used for calculating the upcharge for glass options is the sames used for pricing the base window.EXAMPLE: Series 210 29 3/4 X 51 1/4 = 30 + 52 = 82 UIIn price list a 82 UI falls in the 80 - 82 UI range = $275.80If a Low E Argon option is required, then add $49.08 from the above table for a total of $324.88
Find the U.I. size category for a specific option. For sizes in the “Over 99 U.I.” category, multiplythe actual U.I. by the amount in this box.
1 Not available in series 240, 340, 275, 375, 375EV
2 1 3/8” o/a available in Series 100/100M Casement, Series 150/150M Awning, Series 452 Simulated Casement and Series 402 Picture(formerly Slim Fixed) only. 1 3/8” available in Intercept (standard) and is optional in Inex or TempSmart Spacer. 7/8” triple forSeries 210 Double Hung, Series 201 Single Hung, Series 300 Dbl. Tilt Slider and Series 301 Single Tilt Slider only available withTempSmart Spacer. TempSmart double price in triple units. Premium Casement/Awning/Fixed/Picture heal bead can not be donewith triple glass units. Grills are not available in 7/8” triple. Grills are not available in 7/8” triple.3 Double for triple pane glass.4 Maximum size for TempSmart is 60” by 96” or 96” by 60”.5 Maximum size for INEX is 72” by 96” or 96” by 72”.6 Sealed units with GPW glass are unwarranted.
to 64 U.I. 65-69 U.I. 70-74 U.I. 75-79 U.I. 80-84 U.I. 85-89 U.I. 90-94 U.I. 95-99 U.I.Over99 U.I.
E-Clean Glass 78.02 84.11 90.21 96.30 102.40 108.49 115.80 120.68 1.22
Note: Due to excessive weight, specific size limitations apply forTriple and Keepsafe products. These limits are on each stylesprice page. The overall size of factory mulled windows with tripleglass or Keepsafe is 96” by 60 or 72” by 72” .No factory mulling of Series 400.
Stainless Spacer for triple 37.40 40.32 43.24 46.17 49.08 52.01 54.93 57.85 0.59
SINGLE GLASS AND SEALED UNITS
2.2
Low E
Low E Argon
KeepsafeTM 1 side
Obscure/Frosted
Sycamore
Grey or Bronze
Triple Glaze**
Triple Glaze 1 Low E**
Triple Glaze 2 Low E**
Triple Glaze 2 Low E Argon**
GPW Wire Glass
Tempered 1 side
Tempered 2 side
TempSmart TM
Dual Seal Inex Spacer
12.10 3.03
17.52 4.38
55.25 16.08
8.07 2.02
16.10 4.02
12.10 3.03
22.91 5.73
35.01 8.75
47.04 11.76
52.54 13.13
68.43 17.11
36.23 9.06
60.40 15.10
4.03 1.01
8.07 2.02
Min 4 sq ft Over 4 sq ft
Soft Coat
Sealed Unit 3mm
Soft Coat Argon
27.16 6.79
12.10 3.03
17.52 4.38
Sealed Unit 4, 5 or 6 mm 30.15 7.54
Min 4 sq ft Over 4 sq ft
SEALED UNITS
OPTIONS FOR SEALED UNITS
* Not available in 3/4” o/a Grills are not available in 1/4” air spaces.** Available in Inex or TempSmart Spacer 1 3/8” o/a. 7/8” o/a triple only available with TempSmart Spacer.
OTHER OPTIONS
Clear 2.02 2.62 3.23 3.82
Frosted 4.02 4.62
SINGLE GLASS (MIN 4 SQ FT)
Bronze/Grey 4.94 5.44 5.95
Sycamore 6.33
Amber 10.68
Reeded 10.68
GPW 24.15
Tempered 11.67 12.88
KeepsafeTM 16.08
3 mm 4 mm 5 mm 6 mm
Sealed Unit in Sash extrusion (white only)(no weather stripping or pull rail)
120.20 120.20 246.37
Series 499 - (Maximum Size 48” x 48”)not warranted 0 - 58 U.I. 59 - 110 U.I. over 110 U.I.
Charge for Sealed UnitsPacking Charge
$44.52 + cost of glass$0.93 per lineal ft
ANY PROMOTIONS DO NOT APPLY TO SEALED UNITS
N/A N/A N/A
N/A N/A
N/A
N/A N/AN/A
N/A N/AN/A
N/A N/A N/A
N/A N/A N/A
N/A N/A
+ $ per U.I. > 58 U.I. + $ per U.I. > 110 U.I.2.43 3.22
Glass Limits3 mm 4-16 sq. ft.4 mm 16-30 sq. ft.5 mm 30-40 sq. ft.
When ordering sealed units, provide:* Size* o/a (thickness)* Glass types* Spacer
Vinyl Window Designs maintains a variety ofspacers to make 3/4” and 7/8” o/a sealed units.Requests for o/a thicknesses where we do notmaintain inventory of the appropriate spacerwill be refused.
Sealed Units limited to 5 year warranty.Laminated Glass not available for shapes.Promotional discounts do not apply.
WINDOW ACCESSORIES
2.3 09OC07
** If an order requires windows to be joined then a coupling charge of $11.91 per joint will applye.g. Casement and Fixed joined = 1 charge of $11.91Double Hung, Fixed, Double Hung joined = 2 charges of $11.91 for a total of $23.82
20% upcharge for Ivory and Sandalwood Capstock exterior colours. Painted colours priced per windowper style. See prices on individual style sheets.
BRICK MOULDBrick Mould (Regular or Extended)
Large Brick Mould (2” nominal)
3.97 lin ft**
4.36 lin ft**
Regular or Large Brick Mould with Extended Sill add to Brick Mould Price (price all 4 lineal sides) 33.95 per unit
Renovation Brick Mould with Screw Caps (Not available in cap stock)
Cost to paint brick mould or other Exterior Accessory
5.03 lin. ft.**
56.50 per unit
PVC JAMB EXTENSIONSJamb Extension 1 3/8” or 2” (Welded or loose)
Jamb Extension 3 3/8” (Welded or loose) 5.42 lin ft**
3.74 lin ft**
PVC Extension (Foam Board) up to 2 1/2”/ 2 1/2 to 5 1/2 4.79/6.96 lin ft
Jamb Extension 7” white only - site cut and assembled 6.23 lin ft**
WOOD EXTENSIONSWood Extension less than 2 1/4” (paint grade)
Wood Extension over 2 1/4” and less than 4 5/8” (paint grade)
Wood Extension over 4 5/8” and less than 5 1/2” (paint grade)
3.01 lin ft**
4.16 lin ft**
4.67 lin ft**
70.12 per unitWood Extension cutting charge for non curved shapes i.e. Octagon, Trapezoid
Wood Extension over 5 1/2” and less than 7 1/4” (paint grade)
Wood Extension over 7 1/2” and less than 9 1/4” (paint grade)
6.08 lin ft**
8.88 lin ft**
WJA (Wood Jamb Attachment) 0.93 lin ft**
COUPLERSStraight Couplers (Zero Degree C Couplers)
Colonial Couplers (White Only)
0.93 lin ft
2.29 lin ft
Extra Large Brick Mould (3 1/2” nominal) $6.10 lin. ft.**
Vinyl Clad Wood Extension - Less than or equal to 3 3/8”
Vinyl Clad Wood Extension - 3 3/8” to 7 1/8”
5.15 lin.ft.
lin.ft.8.44
Primed Wood Extension - To 3 3/8”
Primed Wood Extension - Over 3 3/8” to 7”
3.10
4.66
lin.ft.
lin.ft.
WINDOW ACCESSORIES (Cont)
2.4 20OC06
Night Latches (2 per window)
Oriel Window Upcharge
Forced Entry Lock
Casement Sash Restrictors
$2.34 per window
$4.10 per lock
$26.71 per window
LINEAL PROGRAM1 Bag of 3” Jamb Extension (16 pieces at 16 ft) (1747VJ)
1 Bag of 2 5/8” casing (20 pieces at 16ft) (1386VCI)
1 Box of Rosette 500 pieces/box - (137 White Only)
$801.78
$747.94
$1,168.65
MISCELLANEOUS OPTIONS
Lineals of various accessories can be purchased in minimum quantites of 256 lin. ft. andare available at a 10% discount from the factory applied price.
ROSETTE PACKAGE
ASSEMBLY
11.91 each jointAssemble Windows together
Jamb only 3” (cut to size)
Casing only 2 5/8” (cut to size)
Rosettes only 4 required/window -small
Casing only 2 5/8” including wall retainer (white #143 only)
3.74 lin ft
2.80 lin ft
2.80 ea.
4.59 lin ft
N/C
Super Mull Procedure: Combination units of 3 sections or more 65” or greater: Assembled - $4.45 lin ft,(Super Mull utilizes metal reinforcement, fasteners and caulking to provide appropriate reinforcement.) Unassembled - $2.67 lin ft
OTHER ACCESSORIES
Nailing Fin
J Fin (Nailing Fin with J channel)
0.93 lin ft**
1.64 lin ft**
IFT (Interior Flexible Trim)
Drywall Return (cut to length) 1/2” 5/8” 3/4”
Groove filler
Head Expander
Sill Expander
0.47 lin ft**
0.93 lin ft**
0.27 lin ft**
3.09 lin ft**
Long 1.61 lin ft**Short 1.22 lin ft**
2.5 24MA07
DOUBLE HUNG SLIDER
WINDOW COMPONENTSCASEMENT/AWNING
MISCELLANEOUS
Casement Crank Assembly Large
Casement Crank Assembly Small
Casement Lexan Cover
Casement Crank Handle*
*Truth Fold Down Handle (white)*
Awning Crank Assemblies Large
Awning Crank Assemblies Small
Casement Snubber
Casement Hinge
Casement Track
Casement Compression Bulb
Glass Stop
Balance Adjuster
Spiral Balances
DH/Tilt Side Sliders Locks (Std Cam Type)
DH/Tilt Side Sliders Keepers
Release Latch
Pivot Bar
Bumper Cover
Balance Cover
Weather Stripping
Balance Shoe
Double Hung Compression Bulb
Screen Springs
DH Coils
New Screen Insert
Recloth Window Screen
Recloth Patio Door Screen
$9.35 each
$17.76 pr.
$2.72 each
$0.93 each
$4.59 each
$0.67 each
$2.34 each
$1.11 each
$0.70 per ft.
$0.38 foot
$0.67 foot
$0.47 each
$9.35 each
$0.47 u.i
$18.00 each
$80.87 each
$9.35 each
$21.98 each
$36.45 each
$27.11 each
$2.53 each
$9.45 each
$4.30 each
$0.67 foot
$1.11 each
$27.11 each
$17.76 each
$1.78 each
1 Box of Butyl Tape
1 Box of Foam Tape
1 Roll of Butyl Tape
$280.48 per box
$364.62 per box
$13.56 per roll
Screws and Caps for installers $2.36 per window
*Available in Ivory Copper add 15% upcharge
DELUXE AND STANDARD BAYS AND BOWS
3.1 07JL06
DELUXE ASSEMBLY COST
Up to 96” $730.40 $911.55 $964.13 $1355.63 $373.97 $490.83
o/a Projection Up to 24” Over 24” Up to 24” Over 24” Up to 24” Over 24” Up to 24” Over 24”
96” to 120” $1040.10 $1308.89 $1390.70 $1916.59 $444.09 $619.38
Over 120” $1402.38 $1869.84 $1682.86 $2062.26 $479.15 $683.66
Luan Mahogany Plywood Std.up to 96”Fir Over 96”
PAINT GRADE**
Oak, Pine*, Birch or Dark Mahogany (Good 1 Side)
STAIN GRADEWhite
LaminateInsulated
Add
NON ASSEMBLED BAYS & BOWS1. See Options for Coupler Costs.2. Size is WITHOUT allowance for head, seat or jambs.3. When ordered with Brick Mould and no head and seat an assembly charge of $215.03 is applied in addition to Brick Mould Labour Charge and Brick Mould Material Cost.4. Vinyl Exterior Cap $56.10 (White #137 only)
ORDERING INFORMATION REQUIRED:Bays & Bows1. Whether units are to be assembled or not2. If assembled - whether upgraded Head & Seat required3. Series Number for Flankers and Centre Lite4. Overall Width & Height of unit - NOT ROUGH OPENING5. Other pertinent data e.g. KeepsafeTM, Low E etc
OPTIONS
1. Standard Bay includes 1 1/4" Poplar Face Good 1 Side Plywood Sill.2. All window units that make up the Bay and Bow are calculated separately for cost. 3. Standard jamb depth is 5 7/8". Special jamb sizes available upon request. Jambs are attached, with baygroove filler, insulated corner posts and windows are sealed to wood head and seat.4. Different pre-moulded angles are: 10o, 15o, 30o and 45o.5. Bay: Standard 45 degrees (30o optional upon request) - 1/4 1/2 1/4 configuration.6. Bow: Standard 10 degrees (15o optional upon request).
UNLESS OTHERWISE SPECIFIED UNITS WILL BE MADE WITH STANDARD CONFIGURATION
Bay or Bow Couplers $2.58 $3.28per lin ft Colour per lin ft
$368.13 $432.41 $496.67 $560.95$75.96 per Bay/BowSkyHooks for Bays and Bows - (2 per Bay/Bow)
Brick Mould/J Fin/Nail Fin Labour Charge - to cut and weld, Material Extra
Exterior Vinyl Clad (white #137 and #143) $56.10 per Bay/Bow
3 lite 4 lite 5 lite 6 lite
Bow6. 10 or 15 degree couplers*Projection cannot be specified as all windows are made equalwidth therefore projection can only be varied by using 10 or 15degree couplers, or varying the width
*Projections may vary slightly from size requested .
STANDARD BAY/BOW ASSEMBLY CHARGE
Up to 8 ft
8ft - 10 ft
Over 10 ft
Good one sizeLuan MahoganyPAINT GRADE**
Oak, Pine, Birchor Dark Mahogany
STAIN GRADE Insulated
274.64 362.29 549.27
449.93 631.07 899.87
654.56 923.24 1308.89
Assembly Cost 1. Standard Bay includes 3/4"Luan Mahogany FacePlywood head seat and jambs.2. All window units that make up the Bay arecalculated separately for cost.3. Standard jamb depth is 5 7/8". Inquire for specialsizes.4. Standard 45o (30o optional).5. Assembly includes insulated corner posts andsealed windows to wood head and seat.
Bays7. 45 or 30 degree couplers8. Flanker size or inside projection*Flanker & Angle will determine the Projection or Projection & Anglewill determine the Flanker.
Reno Brick Mould add 20%
* Pine is not in stock. Please expect significant delays.**Paint Grade material is subject to change without notice.
Maximum available width for single board for head/seat is 10’.
3.2
BAY WINDOW CALCULATION
Overall Width × Height ×(Overall Width & Height includes Jambs, Head & Seat if assembled)
Flanker: ( A)
Projection: ( B ) OR ( C )
Centre Unit: ( E )
Assembled: Yes ❏ No ❏
"E"CENTRE UNIT
"A"FLANKER
"B"FLANKER
"B"INSIDE�PROJECTION
"C"OUTSIDE
PROJECTION
"D"OVERALL WIDTH ASSEMBLED
OVERALL WIDTH UNASSEMBLED
5 7/8"2"
Inside Outside Deduct for Deduct forFlanker Projection Projection Centre Lite Cente Lite
Std. Jamb Std. Jamb Assembled Unassembled
16 11 1/4 17 1/4 –28 3/4 –27 1/417 11 7/8 17 7/8 –30 1/4 –28 3/418 12 3/4 18 3/4 –31 5/8 –30 1/819 13 3/8 19 3/8 –33 –31 1/220 14 1/8 20 1/8 –34 1/2 –3321 14 7/8 20 7/8 –35 7/8 –34 3/822 15 1/2 21 1/2 –37 1/4 –35 3/423 16 1/4 22 1/4 –38 5/8 –37 1/824 17 23 –40 1/8 –38 5/825 17 5/8 23 5/8 –41 1/2 –4026 18 3/8 24 3/8 –42 7/8 –41 3/827 19 25 –44 3/8 –42 7/828 19 3/4 25 3/4 –45 3/4 –44 1/4 29 20 3/8 26 3/8 –47 1/8 –45 5/830 21 27 –49 5/8 –47 1/8
Inside Outside Deduct for Deduct forFlanker Projection Projection Centre Lite Cente Lite
Std. Jamb Std. Jamb Assembled Unassembled
16 8 14 –32 1/2 –3117 8 1/2 14 1/2 –34 1/4 –32 3/418 9 15 –36 –34 1/219 9 1/2 15 1/2 –37 3/4 –36 1/420 10 16 –39 1/2 –3821 10 1/2 16 1/2 –41 1/8 –39 5/822 11 17 –42 7/8 –41 3/823 11 1/2 17 1/2 –44 5/8 –43 1/824 12 18 –46 3/8 –44 7/825 12 1/2 18 1/2 –48 1/8 –46 5/826 13 19 –49 7/8 –48 3/827 13 1/2 19 1/2 –51 5/8 –50 1/828 14 20 –53 1/4 –51 3/429 14 1/2 20 1/2 –55 –53 1/230 15 21 –56 3/4 –55 1/4
To calculate unit sizes for costing:
45 DEGREE BAY – APPROXIMATE PROJECTIONS 30 DEGREE BAY – APPROXIMATE PROJECTIONS
Jamb Width: 5 7/8" or inches
Configuration as viewed from
outside
Hinges if applicable
Colour
Angle: 45 deg ❏ 30 deg ❏
Head & Seat: GIS ❏ or
Insulated Head & Seat: Yes ❏ No ❏
Actual sizes may vary on final manufacturingDetermine flanker width or projection required and angle of bayLocate appropriate line in tables belowDeduct column “Deduct for Centre Lite” from overall width to give width of Centre lite.Deduct 1 1/2" from height for window heights if Bay is assembledDeduct another 3 1/2" from height for Insulated Head & Seat if applicable
3.3
BOW WINDOW CALCULATION
Overall Width × Height ×(Overall Width & Height includes Jambs, Head & Seat if assembled)
Number of Lights: 4 ❏ 5 ❏ 6 ❏
Assembled: Yes ❏ No ❏
Angle: 10 deg ❏ 15 deg ❏
To calculate unit sizes for costing:
10 DEGREE BOW – APPROXIMATE PROJECTIONS
Jamb Width: 5 7/8" or inches
Configuration as viewed from
outside
Hinges if applicable
Colour
Head & Seat: GIS ❏ or
Insulated Head & Seat: Yes ❏ No ❏
Actual sizes may vary on final manufacturingDivide the overall width by the number of lights and ADD 1 inchUse this width for costing the unitDeduct 1 1/2" from height for window heights if Bay is assembledDeduct another 3 1/2" from height for Insulated Head & Seat if applicable
FLANKER
INSIDEPROJECTION
OUTSIDEPROJECTION
OVERALL WIDTH ASSEMBLED
OVERALL WIDTH UNASSEMBLED
5 7/8"2"
4 Lite 5 Lite 6 LiteWidth Inside Projection Outside Projection Inside Projection Outside Projection Inside Projection Outside Projection
Std. Jamb Std. Jamb Std. Jamb
60 5 1/8 11 1/8 6 1/4 12 1/4 8 1472 6 1/8 12 1/8 7 1/2 13 1/2 9 5/8 15 5/884 7 1/8 13 1/8 8 3/4 14 3/4 11 1/4 17 1/496 8 1/8 14 1/8 10 16 12 3/4 18 3/4108 9 1/8 15 1/8 11 1/4 17 1/4 14 3/8 20 3/8120 10 1/4 16 1/4 12 1/2 18 1/2 16 22132 11 1/4 17 1/4 13 3/4 19 3/4 17 5/8 23 5/8144 12 1/4 18 1/4 15 21 19 1/8 25 1/8
15 DEGREE BOW – APPROXIMATE PROJECTIONS
4 Lite 5 Lite 6 LiteWidth Inside Projection Outside Projection Inside Projection Outside Projection Inside Projection Outside Projection
Std. Jamb Std. Jamb Std. Jamb
60 7 7/8 13 7/8 9 1/2 15 1/2 12 1872 9 3/8 15 3/8 11 3/8 17 3/8 14 3/8 20 3/884 11 17 13 1/4 19 1/4 16 3/4 22 3/496 12 1/2 18 1/2 15 1/8 21 1/8 19 1/4 25 1/4108 14 20 17 23 21 5/8 27 5/8120 15 5/8 21 5/8 19 25 24 30132 17 1/8 23 1/8 20 7/8 26 7/8 26 3/8 32 3/8144 18 3/4 24 3/4 22 3/4 28 3/4 28 7/8 34 7/8
WINDOW SHAPES
4.1 07MR08
LABOUR ONLY FOR NON-STANDARD SHAPES (Material Cost Extra)
354.17 199.32 400.68 222.60 116.60
189.82 142.37 345.48 197.67 116.60
284.74 189.82 431.84 221.71 116.60
389.14 284.74 525.34 370.41 116.60
379.64 237.28 534.24 370.41 116.60
237.28 189.82 311.64 197.67 116.60
398.63 298.97 587.66 406.91 116.60
284.74 147.12 333.90 160.27 116.60
275.24 147.12 284.93 147.81 116.60
237.28 189.82 311.64 197.67 116.60
332.20 218.30 445.20 234.18 116.60
166.09 94.92 249.31 135.34 116.60
199.32 94.92 258.22 147.81 116.60
246.77 104.41 276.02 160.27 116.60
Up to 72” wide Over 72” wide
Shape Code Shape ShapeNail Fin
or DrywallReturn
FCSFull Circle
HMSHalf Moon
EAS Extended Arch
EES**Ext. Ellipse
ESEllipse
QAS1/4 Arch
OSOval
OCTSOctagon
HSHexagon
EQASExtended 1/4 Arch
CSCathedral
TSTriangle
TRSTrapezoid
PSPentagon
1. If Units are couple with Brick Mould, Jamb Extension, Nail Fin or drywall return2. If overall width is different from the shape width and units have to be assembled then3. *Ellipse (ES) Height must be MINIMUM 1/4 of the width eg if the width is 96” then the minimum height is 24”4. **Extended Ellipse (EES) MINIMUM extension is 4” with MINIMUM overall height of 16”Note: Brick Mould or accessories in an extended arch. This type combination would be subject to an assembly
charge plus 50% special shaping charge as per #2 above.
add 50% to shaping chargesadd 116.87 Assembly Charge
284.74 189.82 431.84 221.71 116.60PPR RaisedPart Round
Minimum 24”Diameter
Minimum 24”Width
Minimum 24” Width Minimum 28” 201 Frame
Min. 34” Width Min. 16” HeightShaped Height Min. 1/3 Width
Minimum 12”Width and Height
Minimum 36” WidthMinimum 22” HeightHeight to Width ratiois 1 to 3 or 3 to 1
Minimum 16”Width
Minimum 16”Width
Minimum 12”Width
Minimum 12”Width
Minimum 6”Height
Minimum 24”WidthMin. side 4”
Min. 34” WidthShaped HeightMin. 1/3 Width
Min 18” WidthMin. Side 4”Min Radiusis 12”
Minimum 12”Width/HeightMin. 15o angle
Brickmoldor Jamb
Extension
Brickmoldor Jamb
ExtensionMinimum 60” Width for 3 1/2” BM3 1/2” Brickmould - Min. 60” diameter
Add for SHHMS Frame $210.86
4.2
ALUMINUM GRILLS FOR SHAPES
1 2 3 4
5 6 7 8
9 10 11 12
27 28 29
2423 25 26
13 14
17 18 19 20 21 22
15 16
*†
*
*†
*† * *†
*
*†* *
Distinct Brass or Pewter Upon Request
†
† †
†
†
† † *† *†*†
† †
ALUMINUM GRILLS FOR SHAPES (continued)
4.3
316.31 163.61 239.96 141.80 163.61 294.50 250.87 141.80 174.52 283.59 327.22
305.41 283.59 261.78 174.52 207.24 239.96 316.31 370.85 294.50 239.96 392.67
130.90 163.61 196.33 250.87 141.80 185.43 283.59 327.22 163.61 349.04 196.33
163.61 196.33 207.24 174.52 338.13 185.43 185.43 305.41 283.59 174.52 130.89
163.61 141.80 119.98 98.17 163.61 207.24 185.43 207.24 338.13 98.17 137.12
* Add 20% upcharge Distinct Brass or Pewter Grills
1 - 11 -9 - 10 -8 -7 -6 -5 -4 -3 -2 -
12 - 22 -20 - 21 -19 -18 -17 -16 -15 -14 -13 -
23 - 33 -31 - 32 -30 -29 -28 -27 -26 -25 -24 -
34 - 44 -42 - 43 -41 -40 -39 -38 -37 -36 -35 -
45 - 55 -53 - 54 -52 -51 -50 -49 -48 -47 -46 -
Contour available - 20% surcharge* Add $ for simulated grills Add $ per hub for SDLs.133.56 89.04
1/2 ROUND JAMB - EXTERIOR & INTERIORCURVED SECTIONAL MOULDING
4.4
Prices are for paint grade material - Clear Pine or Mahogany Add 10%, Oak add 30%
1/2 MOON SHAPE
$28.67 $41.90 $83.79 $149.94 $185.22 $202.86$35.28 $52.92 $103.64 $158.76 $194.04 $211.68$35.60 $61.74 $123.48 $167.58 $202.86 $220.50$46.31 $68.36 $136.71 $176.40 $211.68 $229.32$55.13 $83.79 $167.58 $185.22 $220.50 $238.14$61.74 $90.41 $183.02 $194.04 $229.32 $246.96$66.15 $99.23 $200.66 $202.86 $238.14 $255.78$72.77 $108.05 $216.09 $211.68 $246.96 $264.60$77.18 $114.66 $227.12 $220.50 $255.78 $273.42$83.79 $127.89 $253.58 $229.32 $264.60 $282.24$88.20 $130.10 $262.40 $238.14 $273.42 $291.06$94.82 $143.33 $286.65 $246.96 $282.24 $299.88$99.23 $149.94 $299.88 $255.78 $291.06 $308.70
$46.31 $68.36 $134.51 $348.96 $405.64 $433.97$48.51 $70.56 $143.33 $348.96 $405.64 $433.97$50.72 $74.97 $152.15 $348.96 $405.64 $433.97$57.33 $86.00 $171.99 $348.96 $405.64 $433.97$59.54 $90.41 $178.61 $385.92 $449.99 $482.01$61.74 $92.62 $180.81 $385.92 $449.99 $482.01$66.15 $99.23 $198.45 $442.60 $517.97 $555.83$68.36 $103.64 $207.27 $442.60 $517.97 $555.83$74.97 $112.46 $224.91 $442.60 $517.97 $555.83$79.38 $114.66 $238.14 $442.60 $517.97 $555.83
ELLIPTICAL SHAPE - 24 INCH STANDARD HEIGHT
Base Width Wood Jamb Extension Curved Section Wood Moulding
Base WidthWood Jamb Extension Curved Section Wood Moulding
1 3/4 inch 3 1/2 inch 5 1/2 inch 2 1/4 inch 2 3/4 inch 3 1/2 inch
1 3/4 inch 3 1/2 inch 5 1/2 inch 2 1/4 inch 2 3/4 inch 3 1/2 inch
18 - 2425 - 3031 - 3637 - 4243 - 4849 - 5455 - 6061 - 6667 - 7273 - 7879 - 8485 - 9091 - 96
43 - 4849 - 5455 - 6061 - 6667 - 7273 - 7879 - 8485 - 9091 - 96
31 - 42
Other Shapes or Ellipse other than 24 inches high - Call for special quote
Size of Moulding Diagram Cost per linear foot
2 1/4 x 5/8
2 3/4 x 3/4
3 1/2 x 3/4
$7.06
$8.52
$9.86
S-CAS 12 1/4 x 5/8
S-CAS 32 3/4 x 3/4
S-CAS 43 1/2 x 3/4
CALCULATING SHAPE COSTSTO CALCULATE THIS SHAPE
Calculate cost of basic window from the normal pricelist as if the window was a regular shaped window.
Add the cost of any Brick Mould, Jamb Extension,Drywall Return, Nailing Fin for complete combinationusing overall measurements.
Add Low E or other glass options for shape only
Add Grill cost if applicable (shape only)
Add shape bedning charges
Add Brick Mould, Jamb Extension, Drywall Returnand/or Nailing Fin bending costs (if applicable)
If the shape is couples to another unit and has BrickMould, Jamb Extension, Drywall Return or Nailing Finthen add $116.87 assembly cost
If total width of the assembled units is greater than theshape width then Add 50% of the bending costs of theBrick Mould etc in itel #6 plus item #7
Apply discount to the total
Add cost of wttached windows plus their optionsWITHOUT Brick Mould etc. (This was calculated withthe shape.
1
2
3
4
5
6
7
8
9
10
EXAMPLE
1. 402 Series 48 X 24 Base Window (72UI) $201.682. Brick Mould material cost (30 lin ft at $3.97 per lin ftt) $119.10
Drywall Return material cost (30 lin ft at $.93 per lin ft) $ 27.903. Low E (72 ui) $ 30.274. Type 54 Grill $ 98.175. Half Moon Bending Charge $189.826. Brick Mould Bending Charge (EAS) $189.827. Drywall Return Bending Charge (EAS) $116.008. 50% of items 6 + 7 above $152.919. Assembly costs
Subtotal $1,242.54
10. 100MR | 452 | 100MR $894.2984 ui 108 ui 84ui
$278.25 $337.79 $278.2511. Low E - 156 ui $ 63.9612. 2 x 3 | 4 x 3 | 2 x 3 Aluminum Grills
$21.05 $42.10 $21.05
Total $2,284.99 less discount
$116.87
$ 84.20
4.5
24
24
60
48 24
5.1
GRILL SYSTEM
RECOMMENDED COLONIAL GRILL CONFIGURATIONS
TO ORDER GRILL SYSTEM: Indicate the configuration for each sash.
EXAMPLE3 x 2: with three squares across top
and two down in each sash
EXAMPLE2 x 4: with two squares across top
and four down
Width 12" – 29"Height 12" – 29"
2 x 2 Grill
Width 12" – 29"Height 30" – 44"
2 x 3 Grill
Width 12" – 29"Height 45" – 53"
2 x 4 Grill
Width 12" – 29"Height 53" – 66"
2 x 5 Grill
Width 12" – 29"Height 66" – 72"
2 x 6 Grill
Width 30" – 41"Height 12" – 29"
3 x 2 Grill
Width 30" – 41"Height 30" – 44"
3 x 3 Grill
Width 30" – 41"Height 45" – 53"
3 x 4 Grill
Width 30" – 41"Height 53" – 66"
3 x 5 Grill
Width 30" – 41"Height 66" – 72"
3 x 6 Grill
Width 42" – 53"Height 12" – 29"
4 x 2 Grill
Width 42" – 53"Height 30" – 44"
4 x 3 Grill
Width 42" – 53"Height 45" – 53"
4 x 4 Grill
Width 42" – 53"Height 53" – 66"
4 x 5 Grill
Width 42" – 53"Height 66" – 72"
4 x 6 Grill
Width 54" – 65"Height 12" – 29"
5 x 2 Grill
Width 54" – 65"Height 30" – 44"
5 x 3 Grill
Width 54" – 65"Height 45" – 53"
5 x 4 Grill
Width 54" – 65"Height 53" – 66"
5 x 5 Grill
Width 54" – 65"Height 66" – 72"
5 x 6 Grill
Width 66" – 84"Height 12" – 29"
6 x 2 Grill
Width 66" – 84"Height 30" – 44"
6 x 3 Grill
Width 66" – 84"Height 45" – 53"
6 x 4 Grill
Width 66" – 84"Height 53" – 66"
6 x 5 Grill
Width 66" – 84"Height 66" – 72"
6 x 6 Grill
NOTE: Measurement range indicated is PER SASH
COLONIAL GRILLS
5.2 06DE07
1 x 3, 3 x 1 1 x 4, 4 x 1, 2 x 2
2 x 4, 4 x 2 3 x 3 2 x 5, 5 x 2 2 x 6, 6 x 2, 3 x4, 4 x 3 2 x 7 3 x 5 4 x 4 3 x 6, 2 x 9 4 x 5 3 x 7 3 x 8, 4 x 6 5 x 5 4 x 7, 3 x 9
16.70 10.53 63.60 72.3522.26 14.03 67.84 79.50
44.52 28.07 84.80 108.1250.09 31.58 89.04 115.2755.65 35.08 93.28 122.4366.78 42.10 101.76 136.7477.91 49.12 110.24 151.0583.48 52.63 114.48 158.2089.04 56.14 118.72 165.36100.17 63.15 127.20 179.67111.30 70.17 135.67 193.98116.87 73.68 139.92 201.13133.56 84.21 152.64 222.60139.13 87.72 156.88 229.76155.82 98.24 169.60 251.23
1 x 2, 2 x 1
2 x 3, 3 x 2
11.13 7.01 59.36 65.19
27.83 17.54 72.08 86.6633.39 21.05 76.32 93.81
All grills are solid color (interior and exterior the same).Two Tone Colonial/Aluminum Grills Add 25% Unless specified, interior grill color defaults to interior color of the window frame.Colors Available Sandalwood, Brown, Ivory (#143 or #137 whites available for inside) - Refer to color samples for various colors.Notes: 1. Square patterns are always Width x Height
2. Grills are made for 3/8”, 1/2” and 5/8” air spaces.3. Double Hung and Sliders have 2 sashes - Price each separately as required.4. SDL available on Casement, Awning, Fixed and Picture only.
1 x 5, 5 x 1
5 x 6, 3 x 10 4 x 8
6 x 6 5 x 8, 4 x 10 6 x 7 4 x 11 5 x 9 6 x 8 5 x 10 6 x 9 7 x 8 5 x 12, 10 x 6 16 x 4, 8 x 8
166.95 105.26 178.08 265.53178.08 112.28 186.56 279.84
200.34 126.31 203.52 308.46222.60 140.35 220.47 337.08233.73 147.36 228.96 351.40244.86 154.37 237.44 365.70250.43 157.89 241.68 372.86267.12 168.41 254.40 394.32278.25 175.43 262.88 408.63300.51 189.47 279.84 437.25311.64 196.48 288.32 451.57333.90 210.51 305.27 480.18356.16 224.55 322.24 508.80
5 x 7183.65 115.79 190.80 287.00194.78 122.80 199.28 301.31
3 x 11
Distinct Grills(in Brass or Pewter)
or Contour Grills
Colonial/Aluminum
Simulated Divided Liteor V-Groove
(10 mm) 4
Simulated Divided Litewith internal divided spacer
Double Price of Colonial Aluminum for 1” grill bar in nuetral white.Valance Grills (Upper Section of SU): Double Price per Box for each material option.
This example shows a 3 x 1Valance grill. Order mustspecify height of grill andmaterial from the top of the windowto the middle of the horizontal bar.
SPECIALTY GRILLS
5.3
Standard Offset = 3 1/4 inches Note: Combination units should use Series 452 Fixed for best sight line. 400 Picture does not match.
PRAIRIE GRILLSAvailable in Aluminum and Distinct Brass or Pewter
DECORATIVE BRASS GRILLSAvailable in Pencil Bar Brass - maximum width between diamonds is 40”
3 x 2$64.28
3 x 3$87.65
3 x 4$111.02
3 x 2$151.92
3 x 3$186.98
3 x 4$233.73
DIAMOND ALUMINUM GRILLS
5.4 23NO07
Grid configuration is based on window size and proportion of the window width to the window height.Windows with unequal glass lights may have a slight variation.GRID CONFIGURATION will be determined by the manufacturer unless otherwise specified.
3 x 3$79.47
4 x 3$98.17
6 x 3$128.55
5 x 3$114.53
3 x 4$98.17
4 x 4$117.10
6 x 4$169.45
5 x 4$146.08
3 x 5$114.53
4 x 5$146.08
6 x 5$205.68
5 x 5$175.30
Widths 16” to 28”Heights 28” to 38”
Widths 29” to 38”Heights 28” to 38”
Widths 39” to 50”Heights 28” to 38”
Widths 51” to 62”Heights 28” to 38”
Widths 16” to 28”Heights 39” to 62”
Widths 29” to 38”Heights 39” to 62”
Widths 39” to 50”Heights 39” to 62”
Widths 51” to 62”Heights 39” to 62”
Widths 16” to 28”Heights 63” to 72”
Widths 29” to 38”Heights 63” to 72”
Widths 39” to 50”Heights 63” to 72”
Widths 51” to 62”Heights 63” to 72”
Ivory Aluminum Grills add 5%Notes: 1. Diamond patterns are always width x height
2. Grills are made for 3/8”. 1/2” and 5/8” air spaces3. Double Hung and Side Slider Tilt have two sashes - price each separately as required.4. Diamond Grills are only available with black TempSmartTM Spacer5. Grills available in 1/2” and 5/8” air spaces only.6. Maximum sealed unit size with diamonds is 16. sq. ft.
CLIMATESHIELDTM PREMIUM 100M CASEMENT
FEATURES
* Max Size when ordered with triple glass or KeepsafeTM 28” x 66”
6.1 14MR08
AVAILABLE IN BRIGHT WHITE #143 OR NEUTRAL WHITE #137.AVAILABLE IN COEXTRUDED IVORY AND SANDALWOOD EXTERIOR. (White #137 only)AVAILABLE IN EXTERIOR PAINTED COLORS - IVORY, SANDALWOOD, GREY,IVY GREEN, WEDGEWOOD BLUE, COCOA, CHOCOLATE BROWN, TERRA AND PEBBLE.
(Refer to color samples for various colors) Available in Natural Oak interior wood grainwith #137 white (white out only) - add 20% (with extruded screen only)
LEFT HINGEViewed fromOutside
262.95 273.46 283.98 293.33 303.85 316.70 329.56 4.26White
315.54 328.16 340.78 352.00 364.62 380.04 395.47 5.12Ivory/Sandalwood Coext.
ClimateShield PremiumSeries 100M
ClimateShield Premium Series 100MWidths - 12” to 38”Heights - 20” to 80”
Truth Fold Down Handle Add $14.96 Sash Restrictor add $22.26 Packing Charge $1.10 per unit
Building the best window we can todayand working toward building an evenbetter one tomorrow!
Energy Star® CertifiedNational Fenestration Rating Council Certified
CSA (Canadian) CertifiedWindow Wise Certified
AAMA/NWWDA 101 / 1. S. 2. - 97Certified - C-C65 FER30
CERTIFICATIONS AND RATINGS
1
2
3
4
3 1/4” Welded Frame combines with a variety of moldingsand extensions.Welded Sash opens 90 degrees for easy cleaning.
Triple Weather Stripping including two full perimeterbulb seals of premium neoprene MaxTempTM material.
7/8” Overall Sealed Units for optimum efficiency.
5 Available with Triple Glazed 1 3/8” overall Sealed Unit.
6
10
9
8
7
Truth Maxim Heavy Duty Operator System.
Truth Heavy Duty Multipoint Locking System. Truth MaximAdjustable Hinge System is designed for use with MaximOperator for increased access to exterior glass for cleaning.Stress resistant snubber system.
Heavy duty overlap extruded aluminum ‘Push & Pull”screen rail with fibreglass mesh.
Aluminum reinforced hardware anchoring system.
Triple Bond Glazing (Dual durometer inside andoutside, premium heavy duty extruded butyl glazingadhesive to the exterior). Neoprene glazing blocks areapplied to highest industry specifications.
11
PPG Stainless is the structural Warm Edge Spacer System designedfor both double and triple glass windows. Insulated units are sealed with superiorD.S.E. (Dual Seal Equivalent) sealant.
12
Double Glazed units feature unmatched commercial highrise specified full perimeter interior seal to bond the inner glass lite to the sash.
Exterior painted window:Add: $ per frame.75.27
Up to64 U.I.
65 to69 U.I.
70 to74 U.I.
75 to79 U.I.
80 to84 U.I.
85 to89 U.I.
90 to94 U.I.
Over94 U.I.
$8.00Egress Hinge Add
6.2 30AP07
262.95 273.46 283.98 293.33 303.85 316.70 329.56 4.26White
315.54 328.16 340.78 352.00 364.62 380.04 395.47 5.12Ivory/Sandalwood Coext.
ClimateShield PremiumSeries 150M
ClimateShield Premium Series 150MWidths - 20” to 48”Heights - 20” to 36”
Truth Fold Down Handle Add $14.96 Packing Charge per unit
CLIMATESHIELDTM PREMIUM 150M AWNING
Building the best window we can todayand working toward building an evenbetter one tomorrow!
CERTIFICATIONS AND RATINGS
1
2
3
4
3 1/4” Welded Frame combines with a variety of moldingsand extensions.Welded Sash unhinges to access exterior glassfor easy cleaning.Triple Weather Stripping including two full perimeterbulb seals of premium neoprene MaxTempTM material.
7/8” Overall Sealed Units for optimum efficiency.
5 Available in Triple Glazed 1 3/8” overall Sealed Unit.
6
10
9
8
7 Double Truth Heavy Duty Maxim Locks. TruthMaxim Adjustable Hinge System is designed foruse with Maxim Operator for increased access toexterior glass for cleaning.
Heavy duty overlap extruded aluminum ‘Push & Pull”screen rail with fibreglass mesh.Aluminum reinforced hardware anchoring system.
Triple Bond Glazing (Dual durometer inside andoutside, premium heavy duty extruded butyl glazingadhesive to the exterior). Neoprene glazing blocks areapplied to highest industry specifications.
11
PPG Stainless is the structural Warm Edge Spacer System designedfor both double and triple glass windows. Insulated units are sealed with superiorD.S.E. (Dual Seal Equivalent) sealant.
12
Double Glazed units feature unmatched commercial highrise specified full perimeter interior seal to bond the inner glass lite to the sash.
FEATURES
Energy Star® CertifiedNational Fenestration Rating Council Certified
CSA (Canadian) CertifiedWindow Wise Certified
AAMA/NWWDA 101 / 1. S. 2. - 97Certified - C-C65 FER30
* Max Size when ordered with triple glass or KeepsafeTM 48” x 36”
(Refer to color samples for various colors) Available in Natural Oak interior wood grainwith #137 white (white out only) - add 20% (with extruded screen only)
Truth Maxim heavy Duty Scissor Style Operator System.
Exterior painted window:Add: $ per frame.75.27
Up to64 U.I.
65 to69 U.I.
70 to74 U.I.
75 to79 U.I.
80 to84 U.I.
85 to89 U.I.
90 to94 U.I.
Over94 U.I.
AVAILABLE IN BRIGHT WHITE #143 OR NEUTRAL WHITE #137.AVAILABLE IN COEXTRUDED IVORY AND SANDALWOOD EXTERIOR. (White #137 only)AVAILABLE IN EXTERIOR PAINTED COLORS - IVORY, SANDALWOOD, GREY,IVY GREEN, WEDGEWOOD BLUE, COCOA, CHOCOLATE BROWN,TERRA AND PEBBLE.
$1.10
CLIMATESHIELDTM PREMIUM 452 - FIXED CASEMENT
7/8” Overall Sealed Unit for optimum efficiency.
Same sight lines as ClimateShield Premium Series Casement
* Max Size when ordered withtriple glass or KeepsafeTM 60” x 66”
**See TempSmart Glass maximums page 2.1
6.3 30AP07
(Refer to color samples for various colors)
ClimateShield Premium Series 452**Widths - 14” to 96” - If Width > 14 1/2” minimum Height is 8”Heights - 14” to 72” - If Height > 14 1/2” minimum Width is 8”
168.29 3.39 4.50White
202.18 4.06 5.40Ivory/Sandalwood Coext.
ClimateShield PremiumSeries 452
1 3 1/4” Welded Frame combines with a variety of moldingsand extensions.
Building the best window we can todayand working toward building an evenbetter one tomorrow!
FEATURES
2
3
4
5
6
7
Available in Triple Glazed 1 3/8” overall Sealed Unit.
Triple Bond Glazing (Dual durometer inside andoutside, premium heavy duty extruded butyl glazingadhesive to the exterior). Neoprene glazing blocks areapplied to highest industry specifications.
Double Glazed units feature unmatched commercial highrise specified full perimeter interior seal to bond the inner glasslite to the sash.
PPG Stainless is the structural Warm EdgeSpacer System designed for both doubleand triple glass windows. Insulated units aresealed with superior D.S.E. (Dual SealEquivalent) sealant.
CERTIFICATIONS AND RATINGSEnergy Star® Certified
National Fenestration Rating Council CertifiedCSA (Canadian) Certified
Window Wise CertifiedAAMA/NWWDA 101 / 1. S. 2. - 97
Certified- F-HC70 FER39
Available in Natural Oak interior wood grainwith #137 white (white out only) - add 20%
8
Concealed Drainholes provide a clean look.
Exterior painted window:Add: $ per frame.45.02
Up to58 U.I.
59 to110 U.I.
Over110 U.I.
AVAILABLE IN BRIGHT WHITE #143 OR NEUTRAL WHITE #137.AVAILABLE IN COEXTRUDED IVORY AND SANDALWOOD EXTERIOR. (White #137 only )AVAILABLE IN EXTERIOR PAINTED COLORS - IVORY, SANDALWOOD, GREY,IVY GREEN, WEDGEWOOD BLUE, COCOA, CHOCOLATE BROWN,TERRA AND PEBBLE.
Packing Charge per unit$1.10
Slim Frame profile for maximum glass area and maximumsolar heat gain.
6.4 30AP07
(Refer to color samples for various colors)
ClimateShield Premium Series 402Widths - 12” to 72” - If Width > 14 1/2” minimum Height is 8”Heights - 12” to 72” - If Height > 14 1/2” minimum Width is 8”
- If Width </= 60” maximum Height is 80”- If Height </= 60” maximum Width is 80”
156.60 3.22 4.56White
188.15 3.85 5.46Ivory/Sandalwood Coext.
ClimateShield PremiumSeries 402
7/8” Overall Sealed Unit for optimum efficiency.
1 3 1/4” Welded Frame combines with a variety of moldingsand extensions.
Building the best window we can todayand working toward building an evenbetter one tomorrow!
FEATURES
2
3
4
5
6
Available in Triple Glazed 1 3/8” overall Sealed Unit.
Triple Bond Glazing (Dual durometer inside andoutside, premium heavy duty extruded butyl glazingadhesive to the exterior). Neoprene glazing blocks areapplied to highest industry specifications.
Double Glazed units feature unmatched commercial highrise specified full perimeter interior seal to bond the inner glasslite to the sash.
Available in Natural Oak interior wood grainwith #137 white (white out only) - add 20%
Not available in 400J
* Max Size when ordered withtriple glass or KeepsafeTM 60” x 48”
with no factory mulling.
CERTIFICATIONS AND RATINGSEnergy Star® Certified
National Fenestration Rating Council CertifiedCSA (Canadian) Certified
Window Wise CertifiedAAMA/NWWDA 101 / 1. S. 2. - 97
Certified - F-HC70 FER40
Exterior painted window:Add: $ per frame.45.02
Up to58 U.I.
59 to110 U.I.
Over110 U.I.
CLIMATESHIELDTM PREMIUM 402 - PICTURE
AVAILABLE IN BRIGHT WHITE #143 OR NEUTRAL WHITE #137.AVAILABLE IN COEXTRUDED IVORY AND SANDALWOOD EXTERIOR. (White #137 only )AVAILABLE IN EXTERIOR PAINTED COLORS - IVORY, SANDALWOOD, GREY,IVY GREEN, WEDGEWOOD BLUE, COCOA, CHOCOLATE BROWN, TERRA AND PEBBLE.
7
8
Concealed Drainholes provide a clean look.
Packing Charge per unit$1.10
PPG Stainless is the structural Warm EdgeSpacer System designed for both doubleand triple glass windows. Insulated units aresealed with superior D.S.E. (Dual SealEquivalent) sealant.
CLIMATESHIELDTM PREMIUM 210C DOUBLE HUNG
7/8” overall sealed units are glazed with heavy duty glazingtape into sashes with coextruded dual durometer gasketsfor optinmum efficiency.
Lift Rails are integral to the sash, not to a glass stop forstrength and ease of operation.
All channels are covered with easily washable, removablevinyl covers for a lustrous, finished appearance.
6.5 27MR06
Widths - 16 1/2” to 48” - If Width > 15” minimum Height is 24”Heights - 27 1/2” to 80” - If Height > 27 1/2” minimum Width is 15”
226.72 241.91 252.43 262.95 275.80 286.32 296.84 324.88 3.70White
272.30 289.83 302.68 315.54 330.73 343.58 356.44 393.84 4.40Ivory/Sandalwood Coext.
ClimateShield PremiumSeries 210C
Recessed tilt latches for an elegant, clean sight line. Bothsashes tilt in for easy cleaning and easy removal.
A true full slope sill is created by a compound cut andweld between the sill and jamb. ‘Over the top’ drainagerequires no drain holes, eliminating a source of air penetration.
Triple weather stripped sashes operate smoothly andhave greater long term resistance to air infiltration. Thecritical sill seal contains a Double Flow-Out designutilizing a Neoprene bulb on the underside of the sash.
Forced Entry Locks are an available option.
Exterior Glazing is the choice of engineers and architects.It looks great and resists exterior air pressure for higherperformance.
InstaLock tilt shoe mechanisms are quick to lock in place whenyou clean your window. The Premium Spiral balancesystem is smooth and quiet as you operate your window.
(42” to 48” Wide Add charge of $35.06)
Night Latches Packing ChargeAdd $2.34 per window $1.10 per unit
Building the best window we can todayand working toward building an evenbetter one tomorrow!
FEATURES1
2
3
4
5
6
10
9
8
7
11
3 1/4” Welded Frame combines with a variety of moldingsand extensions.
* Max Size when ordered withtriple glass or KeepsafeTM 40” x 66”
Standard Extruded Half Screen. Full screen is available.
CERTIFICATIONS AND RATINGSENERGY STAR CertifiedCSA (Canadian) Certified
Window Wise CertifiedAAMA/NWWDA 101 / 1. S. 2. - 97
Certified - DH-R40 FER20
ClimateShield Premium Series 210C(Refer to color samples for various colors) Painted color out with full overlap screen only
Exterior painted window:Add: $ per frame.90.05
Up to64 U.I.
65 to69 U.I.
70 to74 U.I.
75 to79 U.I.
80 to84 U.I.
85 to89 U.I.
90 to94 U.I.
Over99 U.I.
95 to99 U.I.
5.55Jamb Adjusters per window$ 11.69Full Screen per window$Price includes Head and Small Sill Extensions
AVAILABLE IN BRIGHT WHITE #143 OR NEUTRAL WHITE #137.AVAILABLE IN COEXTRUDED IVORY AND SANDALWOOD EXTERIOR. (White #137 only)AVAILABLE IN EXTERIOR PAINTED COLORS - IVORY, SANDALWOOD, GREY,IVY GREEN, WEDGEWOOD BLUE, COCOA, CHOCOLATE BROWN, TERRA AND PEBBLE.
6.6 20JN06
Widths - 27 1/2” to 72” - If Width > 27 1/2” minimum Height is 15”Heights - 16 1/2” to 50” - If Height > 27 1/2” minimum Width is 24”Combination Units - Maximum width 54” (Fix over slider combination)
223.21 236.07 244.25 252.43 262.95 278.14 288.66 312.03 3.65White
267.62 282.81 293.33 302.68 315.54 334.23 345.92 373.97 4.37Ivory/Sandalwood Coext.
ClimateShield PremiumSeries 300FH
(42” to 50” High Add charge of $35.06)
Night LatchesOriel Units
Packing ChargeAdd $2.34 per windowNo Charge
$1.10 per unit
7/8” overall sealed units are glazed with heavy duty glazingtape into sashes with coextruded dual durometer gasketsfor optinmum efficiency.
All channels are covered with easily washable, removablevinyl covers for a lustrous, finished appearance.
Recessed tilt latches for an elegant, clean sight line. Bothsashes tilt in for easy cleaning and easy removal.
Forced Entry Locks are an available option.
Exterior Glazing is the choice of engineers andarchitects. It looks great and resists exterior airpressure for higher performance.
InstaLock tilt shoe mechanisms are quick to lock inplace when you clean your window.
1
2
3
4
5
6
10
9
8
7
11
3 1/4” Welded Frame combines with a variety of moldingsand extensions.
Lift Rails are integral to the sash, not to a glass stop forstrength and ease of operation.
Triple weather stripped sashes operate smoothly andhave greater long term resistance to air infiltration.The critical jamb seal utilizes dual Neoprene bulbsinto enclosed frame pockets.
The building envelop is protected by separating thedrainage system for the interior half of the windowfrom the main exterior drainage. All drain holes haveair resistant flaps.
* Max Size when ordered withtriple glass or KeepsafeTM 40” x 75”
(Refer to color samples for various colors) Painted color out with full overlap screen onlyClimateShield Premium Series 300FH
CERTIFICATIONS AND RATINGSENERGY STAR Certified
CSA (Canadian) CertifiedWindow Wise Certified
AAMA/NWWDA 101 / 1. S. 2. - 97Certified - HS-R35 FER10
Exterior painted window:Add: $ per frame.90.05
Up to64 U.I.
65 to69 U.I.
70 to74 U.I.
75 to79 U.I.
80 to84 U.I.
85 to89 U.I.
90 to94 U.I.
Over99 U.I.
95 to99 U.I.
11.69Full Screen $ per window
Standard Extruded Half Screen. Full screen is available.
AVAILABLE IN BRIGHT WHITE #143 OR NEUTRAL WHITE #137.AVAILABLE IN COEXTRUDED IVORY AND SANDALWOOD EXTERIOR. (White #137 only)AVAILABLE IN EXTERIOR PAINTED COLORS - IVORY, SANDALWOOD, GREY,IVY GREEN, WEDGEWOOD BLUE, COCOA, CHOCOLATE BROWN, TERRA AND PEBBLE.
CLIMATESHIELDTM PREMIUM 300FH DBL. TILT SLIDER
Building the best window we can todayand working toward building an evenbetter one tomorrow!
FEATURES
CLIMATESHIELDTM PREMIUM 201VS & 201VSJ
1
FEATURES
2
3
4
3 1/4” Welded Frame & Sash
7/8” overall sealed units for optimum efficiency
Bottom sash tilts in for easy cleaning
Integral lift rail for ease of operation
5 Standard 1/2 screen
ASTM D 4099-89Residential Grade 40
Forced Entry ResidentialGrade 10
NFRC CertifiedEnergy Star® Certified
CSA (Canada) Certified
* Max Size when ordered with triple glass or KeepsafeTM 40” x 72”
6.7
Widths - 16 1/2” to 48” - If Width > 16 1/2” minimum Height is 24”Heights - 27 1/2” to 80” - If Height > 27 1/2” minimum Width is 12”
186.98 192.83 197.50 203.35 210.36 220.87 230.84 246.59 3.12White
224.38 231.39 237.00 244.01 252.43 265.05 277.00 295.90 3.74
Series 201VS, 201 VSJ
6
10
9
8
7
11
Recessed locking latches for improved appearance
Triple weather stripped sashes
Double Neoprene bulb seal on bottom sash
Exterior Glazed for high performance results
Insta Lock shoes for added security
(42” to 48” Wide Add charge of $35.06)
Night LatchesOriel UnitsPacking Charge
(Refer to color samples for various colors)
Add $2.09 per window (surface mounted) White #143 only.No Charge$1.10 per unit
Exterior painted window:Add: $ per frame.90.05
Up to64 U.I.
65 to69 U.I.
70 to74 U.I.
75 to79 U.I.
80 to84 U.I.
85 to89 U.I.
90 to94 U.I.
Over99 U.I.
95 to99 U.I.
Integral Nail/J Fin at no extra charge on “J” seriesIntegral J not available on coupled windows. (Not available in Ivoryor Sandalwood.)
CERTIFICATIONS AND RATINGS
AVAILABLE IN BRIGHT WHITE #143 OR NEUTRAL WHITE #137.AVAILABLE IN COEXTRUDED IVORY AND SANDALWOOD EXTERIOR. (White #137 only - No 201VSJ)AVAILABLE IN EXTERIOR PAINTED COLORS - IVORY, SANDALWOOD, GREY,IVY GREEN, WEDGEWOOD BLUE, COCOA, CHOCOLATE BROWN, TERRA AND PEBBLE.
Ivory and Sandal wood Coex.(Not Available in J)
CLIMATESHIELDTM PREMIUM301VS, 301VSJ, 303VS & 303VSJ
1
FEATURES
2
3
4
3 1/4” Welded Frame & Sash
7/8” overall sealed units for optimum efficiency
One sash tilts in for easy cleaning
Integral pull rail for ease of operation
5 Standard 1/2 screen
AAMA/NWWDA 101 / 1. S. 2. - 97Energy Star® Certified
NFRC Certified
* Max Size when ordered with triple glass or KeepsafeTM 72” x 40”
6.8
Widths - 29 1/2” to 72” - If Width > 29 1/2” minimum Height is 12”Heights - 16 1/4 to 50” - If Height > 16 1/4” minimum Width is 22”
195.16 199.84 205.68 210.36 216.20 226.72 236.07 254.77 3.22White
234.20 239.81 246.82 252.43 259.44 272.06 283.28 305.72 3.86
Series 301VS/VSJ & VSNFSeries 303VS & 303VSJ
6
10
9
8
7
Recessed locking latches for improved appearance
Triple weather stripped sashes
Double Neoprene bulb seals where sash meets jamb
Exterior Glazed for high performance results
Insta Lock shoes for added security
(42” to 50” High Add charge of $35.06)
Night LatchesOriel UnitsPacking Charge
11
(Refer to color samples for various colors)
Add $2.34 per window (surface mounted) White #143 only.No Charge$1.10 per unit
Note: Style 303VS/303VSJ utilizes tilt latches at thewindow head in order to lift out the operating sash
Exterior painted window:Add: $ per frame.90.05
Up to64 U.I.
65 to69 U.I.
70 to74 U.I.
75 to79 U.I.
80 to84 U.I.
85 to89 U.I.
90 to94 U.I.
Over101 U.I.
95 to101 U.I.
Integral Nail/J Fin at no extra charge on “J” seriesIntegral J not available on coupled windows. (Not available in Ivory.)
CERTIFICATIONS AND RATINGS
AVAILABLE IN BRIGHT WHITE #143 OR NEUTRAL WHITE #137.AVAILABLE IN COEXTRUDED IVORY AND SANDALWOOD EXTERIOR. (White #137 only - No 301VSJ or 303VSJ)AVAILABLE IN EXTERIOR PAINTED COLORS - IVORY, SANDALWOOD, GREY,IVY GREEN, WEDGEWOOD BLUE, COCOA, CHOCOLATE BROWN, TERRA AND PEBBLE.
Ivory and Sandal wood Coex.(Not Available in J)
SERIES 301VSEV & 301VSJEV - END VENT TILT SLIDERSERIES 303VSEV & 303VSJEV - END VENT LIFT SLIDER
1
FEATURES
2
3
4
3 1/4” Welded Frame & Sash
7/8” overall sealed units for optimum efficiency
End sashes tilt in for easy cleaning
Integral pull rail for ease of operation
5 Standard screen on each end
Energy Star® CertifiedNFRC Certified
* Max Size when ordered with triple glass or KeepsafeTM 96” x 40”
6.9 22AU06
Widths - 54” to 96”Heights - 15” to 50”
296.80 3.30White
356.16 3.95
Up to 101 U.I. Over 101 U.I.Series 301VSEV & 301VSJEVSeries 303VSEV & 303VSJEV
6
10
9
8
7
Recessed locking latches for improved appearance
Triple weather stripped sashes
Double Neoprene bulb seals where sash meets jamb
Exterior Glazed for high performance results
Insta Lock shoes for added security
(42” to 50” High Add charge of $35.06)
Oriel Units1/4 1/2 1/4Packing Charge
11
(Refer to color samples for various colors)
No ChargeStandard$1.10 per unit
Note: Style 303VSEV/303VSJEV utilizes tilt latches atthe window head in order to lift out the operating sash.
Exterior painted window:Add: $ per frame.134.40
Night Latches Not Available
CERTIFICATIONS AND RATINGS
Integral Nail/J Fin at no extra charge on “J” seriesIntegral J not available on coupled windows. (Not available in Ivory)
AVAILABLE IN BRIGHT WHITE #143 OR NEUTRAL WHITE #137.AVAILABLE IN COEXTRUDED IVORY AND SANDALWOOD EXTERIOR. (White #137 only - No 301VSJEV or 303VSEVJ. )AVAILABLE IN EXTERIOR PAINTED COLORS - IVORY, SANDALWOOD, GREY,IVY GREEN, WEDGEWOOD BLUE, COCOA, CHOCOLATE BROWN, TERRA AND PEBBLE.
Ivory and Sandal wood Coex.(Not Available in J)
CLIMATESHIELDTM PLUS 100MR CASEMENT
FEATURES
7.1 14MR08
LEFT HINGEViewed fromOutside
241.91 246.59 257.10 267.62 278.25 290.99 301.51 4.11White
290.29 295.90 308.52 321.15 333.90 349.19 361.81 4.93Ivory/Sandalwood Coext.
ClimateShield PlusSeries 100MR
ClimateShield Plus Series 100MRWidths - 12” to 34”Heights - 20” to 72”
Plus Fold Down Handle Add $10.82 Sash Restrictor add $22.26 Packing Charge $1.10 per unit
New testing in progressCERTIFICATIONS AND RATINGS
1
2
3
4
3 1/4” Welded Frame combines with a variety of moldingsand extensions.Welded Sash opens 90 degrees for easy cleaning.
Triple Weather Stripping including two full perimeterbulb seals of premium neoprene MaxTempTM material.
7/8” Overall Sealed Units for optimum efficiency.
5
6
10
9
8
7
Truth Maxim Heavy Duty Operator System.
Smooth operating Multipoint Locking System. HeavyDuty 11” Hinge System. Stress resistant snubber system.
Heavy duty screen rail with fibreglass mesh.
Aluminum reinforced hardware anchoring system.
Dual durometer inside and outside. Neoprene glazingblocks are applied to highest industry specifications.
Intercept Warm Edge Spacer System is structurallysuperior. Insulated units are sealed with superiorD.S.E. (Dual Seal Equivalent) sealant.
Our “Plus” is justified by our quality!
Exterior painted window:Add: $ per frame.
(Refer to color samples for various colors) Painted color out with full overlap screen only
75.27
Up to64 U.I.
65 to69 U.I.
70 to74 U.I.
75 to79 U.I.
80 to84 U.I.
85 to89 U.I.
90 to94 U.I.
Over94 U.I.
* Triple glass or KeepsafeTM not available. Use Premium Series
AVAILABLE IN BRIGHT WHITE #143 OR NEUTRAL WHITE #137.AVAILABLE IN COEXTRUDED IVORY AND SANDALWOOD EXTERIOR. (White #137 only)AVAILABLE IN EXTERIOR PAINTED COLORS - IVORY, SANDALWOOD, GREY,IVY GREEN, WEDGEWOOD BLUE, COCOA, CHOCOLATE BROWN, TERRA AND PEBBLE.
$8.00Egress Hinge Add
7.2
241.91 246.59 257.10 267.62 278.25 290.99 301.51 4.11White
290.29 295.67 308.52 321.38 333.90 349.43 361.70 4.92Ivory/Sandalwood Coext.
ClimateShield PlusSeries 150MR
ClimateShield Plus Series 150MRWidths - 20” to 48”Heights - 20” to 36”
Plus Fold Down Handle Add $10.82 $1.10Packing Charge per unit
CLIMATESHIELDTM PLUS 150MR AWNING
CERTIFICATIONS AND RATINGS
Welded Sash unhinges to access exterior glassfor easy cleaning.
FEATURES
New testing in progress
Truth Maxim heavy Duty Scissor Style Operator System.
1
2
3
4
3 1/4” Welded Frame combines with a variety of moldingsand extensions.
Triple Weather Stripping including two full perimeterbulb seals of premium neoprene MaxTempTM material.
7/8” Overall Sealed Units for optimum efficiency.
5
6
10
9
8
7
Smooth operating Multipoint Locking System. HeavyDuty 11” Hinge System. Stress resistant snubbersystem.
Heavy duty screen rail with fibreglass mesh.
Aluminum reinforced hardware anchoring system.
Dual durometer inside and outside. Neoprene glazingblocks are applied to highest industry specifications.
Intercept Warm Edge Spacer System is structurallysuperior. Insulated units are sealed with superiorD.S.E. (Dual Seal Equivalent) sealant.
Our “Plus” is justified by our quality!
Exterior painted window:Add: $ per frame.
(Refer to color samples for various colors) Painted color out with full overlap screen only
75.27
Up to64 U.I.
65 to69 U.I.
70 to74 U.I.
75 to79 U.I.
80 to84 U.I.
85 to89 U.I.
90 to94 U.I.
Over94 U.I.
* Triple glass or KeepsafeTM not available. Use Premium Series
AVAILABLE IN BRIGHT WHITE #143 OR NEUTRAL WHITE #137.AVAILABLE IN COEXTRUDED IVORY AND SANDALWOOD EXTERIOR. (White #137 only)AVAILABLE IN EXTERIOR PAINTED COLORS - IVORY, SANDALWOOD, GREY,IVY GREEN, WEDGEWOOD BLUE, COCOA, CHOCOLATE BROWN, TERRA AND PEBBLE.
CLIMATESHIELDTM PLUS 452R - FIXED CASEMENT
7/8” Overall Sealed Unit for optimum efficiency.
Same sight lines as ClimateShield Plus Series Casement
7.3
PClimateShield Plus Series 452RWidths - 14” to 80” - If Width > 14 1/2” minimum Height is 8”Heights - 14” to 72” - If Height > 14 1/2” minimum Width is 8”
162.99 3.39 4.50White
196.88 4.06 5.40Ivory/Sandalwood Coext.
ClimateShield PlusSeries 452R
1 3 1/4” Welded Frame combines with a variety of moldingsand extensions.
FEATURES
2
3
4
5
6
Dual durometer inside and outside. Neoprene glazing blocksare applied to highest industry specifications.
Intercept Warm Edge Spacer System is structurallysuperior. Insulated units are sealed with superiorD.S.E. (Dual Seal Equivalent) sealant.
CERTIFICATIONS AND RATINGS
Concealed Drainholes provide a clean look.
Our “Plus” is justified by our quality!
Exterior painted window:Add: $ per frame.
(Refer to color samples for various colors)
45.02
Up to58 U.I.
59 to110 U.I.
Over110 U.I.
$1.10Packing Charge
* Triple glass or KeepsafeTM notavailable. Use Premium Series
AVAILABLE IN BRIGHT WHITE #143 OR NEUTRAL WHITE #137.AVAILABLE IN COEXTRUDED IVORY AND SANDALWOOD EXTERIOR. (White #137 only)AVAILABLE IN EXTERIOR PAINTED COLORS - IVORY, SANDALWOOD, GREY,IVY GREEN, WEDGEWOOD BLUE, COCOA, CHOCOLATE BROWN, TERRA AND PEBBLE.
CLIMATESHIELDTM PLUS 402R - PICTURE
Slim Frame profile for maximum glass area and maximumsolar heat gain.
7.4
ClimateShield Plus Series 402RWidths - 12” to 72” - If Width > 14 1/2” minimum Height is 8”Heights - 12” to 72” - If Height > 14 1/2” minimum Width is 8”
151.03 3.22 4.56White
182.59 3.85 5.46Ivory/Sandalwood Coext.
ClimateShield PlusSeries 402R
7/8” Overall Sealed Unit for optimum efficiency.
1 3 1/4” Welded Frame combines with a variety of moldingsand extensions.
FEATURES
2
3
4
5
Dual durometer inside and outside. Neoprene glazing blocksare applied to highest industry specifications.
Intercept Warm Edge Spacer System is structurallysuperior. Insulated units are sealed with superiorD.S.E. (Dual Seal Equivalent) sealant.
* Max Size when ordered withtriple glass or KeepsafeTM 60” x 66”
CERTIFICATIONS AND RATINGS
Our “Plus” is justified by our quality!
Exterior painted window:Add: $ per frame.
(Refer to color samples for various colors)
45.02
Up to58 U.I.
59 to110 U.I.
Over110 U.I.
$1.10Packing Charge
AVAILABLE IN BRIGHT WHITE #143 OR NEUTRAL WHITE #137.AVAILABLE IN COEXTRUDED IVORY AND SANDALWOOD EXTERIOR. (White #137 only)AVAILABLE IN EXTERIOR PAINTED COLORS - IVORY, SANDALWOOD, GREY,IVY GREEN, WEDGEWOOD BLUE, COCOA, CHOCOLATE BROWN,TERRA AND PEBBLE.
1FEATURES
2
3
4
3 1/4” Welded Frame & Sash
3/4” overall sealed units for optimum efficiency
Both sashes tilt in for easy cleaning. Our heavy dutyconstant force balance system raises and lowers sasheswith minimal effort.
Integral lift rail for ease of operation
5
AAMA/NWWDA 101 / 1. S. 2. - 97Certified H - FER 10HResidential Grade 50
Forced Entry ResistanceGrade 10
Energy Star® CertifiedNFRC Certified
7.5 30AP07
Widths - 16 1/2” to 48” - If Width > 16 1/2” minimum Height is 24”Heights - 27 1/2” to 80” - If Height > 27 1/2” minimum Width is 15 1/4”
224.38 231.39 239.57 250.09 259.44 275.80 286.32 309.69 3.48White
ClimateShield PlusSeries 240 & 240J
6
10
9
8
7
11
12
Recessed locking latches for improved appearance
Compound Cut Sloped Sill
Double weather stripped sashes
Bulb seal on bottom sash
Exterior Glazed for high performance results
Insta Lock shoes for added security
(42” to 48” Wide Add charge of $35.06)
Patio Door Style Interlock
13
Available in Natural Oak interior woodgrain with #137 White (white out only) - add 30%
Natural Oak not available in 240J
Night Latches
Packing Charge
Add $2.34 per window
$1.10 per unit
AVAILABLE IN BRIGHT WHITE #143 OR NEUTRAL WHITE #137.AVAILABLE IN EXTERIOR PAINTED COLORS - IVORY, GREY,SANDALWOOD, IVY GREEN, WEDGEWOOD BLUE, COCOA,CHOCOLATE BROWN, TERRA AND PEBBLE.
(Refer to color samples for various colors)Painted color out with full overlap screen only
ClimateShield Plus Series 240/240J
Our “Plus” is justified by our quality!
Exterior painted window:Add: $ per frame.90.05
Up to64 U.I.
65 to69 U.I.
70 to74 U.I.
75 to79 U.I.
80 to84 U.I.
85 to89 U.I.
90 to94 U.I.
Over99 U.I.
95 to99 U.I.
Integral Nail/J Fin at no extra charge on “J” seriesIntegral J not available on coupled windows. Not available in Ivory.
* Not available with Triple glass or KeepsafeTM
Full Screen
Price includes Head and Small Sill Extensions5.55Jamb Adjusters per window$
CLIMATESHIELDTM PLUS 240/240J DOUBLE HUNG
per unit11.69
Standard Extruded Half Screen. Full screen is available.
CERTIFICATIONS AND RATINGS
7.6 22NO07
206.85 218.54 226.72 233.73 243.08 257.10 267.62 288.66 3.37White
ClimateShield PlusSeries 340/340J
Night Latches
Packing Charge
Add $2.34 per window
$1.10 per unit
Up to64 U.I.
65 to69 U.I.
70 to74 U.I.
75 to79 U.I.
80 to84 U.I.
85 to89 U.I.
90 to94 U.I.
Over99 U.I.
95 to99 U.I.
Full Screen per unit
CLIMATESHIELDTM PLUS 340/340J - DBL. TILT SLIDER
11.69
FEATURES
CSA A440-M98 A3 B3 C4 F2 ApprovedEnergy Rating 2005 (Low E - Argon) +29
Energy Star Certified
Widths - 27 1/2” to 72” - If Width > 27 1/2” minimum Height is 12”Heights - 17 3/4” to 48” - If Height > 17 3/4” minimum Width is 22”Combination Units - Maximum Width 54” (Picture over slider combination)
109 Exterior Glazed for high performance results
340/340J feature Insta Lock shoes for added security
(42” to 48” High Add charge of $35.06)
11 Patio Door Style Interlock
12
(Refer to colour samples for various colours)Painted colour out with full overlap screen only
340/340J RATINGS
Our “Plus” is justified by our quality!
ClimateShield Plus Series 340/340J
340 available in Natural Oak interior woodgrain with #137 White (white out only) - add 40%
Natural Oak not available in 340J.
Exterior painted window:Add: $ per frame.90.05
Integral Nail/J Fin at no extra charge on “340J” seriesIntegral J not available on coupled windows.
* Not available with Triple glass or KeepsafeTM
AVAILABLE IN BRIGHT WHITE #143 OR NEUTRAL WHITE #137..AVAILABLE IN EXTERIOR PAINTED COLOURS - IVORY, GREY,SANDALWOOD, IVY GREEN, WEDGEWOOD BLUE, COCOA,CHOCOLATE BROWN, TERRA AND PEBBLE.
1
2
3
4
3 1/4” Welded Frame & Sash
3/4” overall sealed units for optimum efficiency
340/340J - Both sashes tilt in for easy cleaning.
Integral pull rail for ease of operation
5 Standard Full screen
6
87
340/340J feature recessed locking latchesfor improved appearanceDouble weather stripped sashes340/340J utilize bulb seals where both sashesmeet the jambs.
7.6 22NO07
206.85 218.54 226.72 233.73 243.08 257.10 267.62 288.66 3.37White
ClimateShield PlusSeries 355*
Night Latches
Packing Charge
Add $2.34 per window (not available on 355)
$1.10 per unit
Up to64 U.I.
65 to69 U.I.
70 to74 U.I.
75 to79 U.I.
80 to84 U.I.
85 to89 U.I.
90 to94 U.I.
Over99 U.I.
95 to99 U.I.
Full Screen per unit11.69
FEATURES
Exterior Glazed for high performance results
Patio Door Style Interlock
(Refer to colour samples for various colours)Painted colour out with full overlap screen only
Our “Plus” is justified by our quality!
Exterior painted window:Add: $ per frame.90.05
* Not available with Triple glass or KeepsafeTM
AVAILABLE IN BRIGHT WHITE #143 OR NEUTRAL WHITE #137..AVAILABLE IN EXTERIOR PAINTED COLOURS - IVORY, GREY,SANDALWOOD, IVY GREEN, WEDGEWOOD BLUE, COCOA,CHOCOLATE BROWN, TERRA AND PEBBLE.
355 RATINGSCSA A440-M98 A2 B3 C3 F2 Approved
Widths - 22” to 72”Heights - 14 1/2” to 48” - Optional: Up to 60” high if Width < 60”Combination Units - Maximum Width 54” (Picture over slider combination)
ClimateShield Plus Series 355
CLIMATESHIELDTM PLUS 355 DBL. LIFT OUT SLIDER
* These prices not valid for 355E
1
2
3
4
3 1/4” Welded Frame & Sash
3/4” overall sealed units for optimum efficiency
355 Both sashes lift out.
Integral pull rail for ease of operation
5 Standard Full screen
6
87
Double weather stripped sashes
CLIMATESHIELD PLUSTM 275 & 275NF - SINGLE HUNG
1
FEATURES
2
3
4
2 3/4” Welded Frame & Sash
3/4” overall sealed units for optimum efficiency
Bottom sash tilts in for easy cleaning
Integral lift rail for ease of operation
5 Standard 1/2 screen
Energy Star® CertifiedNFRC Certified
AAMA R-20Forced Entry Grade 10
7.7
AVAILABLE IN WHITE 143 ONLY
Widths - 16 1/2” to 42” - If Width > 16 1/2” minimum Height is 24”Heights - 27 1/2” to 80” - If Height > 27 1/2” minimum Width is 12”
176.47 182.31 186.98 192.83 197.50 205.68 216.20 233.73 2.90White
Series 275 & 275NF
6
8
7
Recessed locking latches for improved appearance
Exterior Glazing for high performance results
Night Latches
Packing Charge
Integral Nail Fin at no extra charge on “NF” series
Not available
$1.10 per unit
Not available with triple glass or KeepsafeTM.
Up to64 U.I.
65 to69 U.I.
70 to74 U.I.
75 to79 U.I.
80 to84 U.I.
85 to89 U.I.
90 to94 U.I.
Over99 U.I.
95 to99 U.I.
(Over 72” to 80” High Add charge of $35.06)
5.55Jamb Adjusters per window$
CERTIFICATIONS AND RATINGS
Integral Nail Fin at no extra chargeon “NF” series
Exterior Glazed for high performance results
CLIMATESHIELD PLUSTM 375 & 375NF
1
FEATURES
2
3
4
2 3/4” Welded Frame & Sash
3/4” overall sealed units for optimum efficiency
One sash tilts in for easy cleaning
Integral pull rail for ease of operation
5 Standard 1/2 screen
7.8 June 7, 2006
Series 375Widths - 30” to 72”Heights - 12” to 48”
174.13 179.97 184.65 189.32 195.16 203.35 212.69 231.39 2.74White
Series 375 & 375NF
6
8
7
Recessed locking latches for improved appearance
(For Units over 42” high Add charge of $35.06)
Night Latches
Packing Charge
AVAILABLE IN WHITE 143 ONLY
Not available
$1.10 per unit
Series 375NFWidths - 30” to 72”Heights - 16 1/2” to 48”
Series 375/375NFIf Width > 30” minimum Height is 12”If Height > 16 1/2” minimum width is 24”
Not available with triple glass or KeepsafeTM.
Up to64 U.I.
65 to69 U.I.
70 to74 U.I.
75 to79 U.I.
80 to84 U.I.
85 to89 U.I.
90 to94 U.I.
Over99 U.I.
95 to99 U.I.
Energy Star® CertifiedNFRC Certified
CERTIFICATIONS AND RATINGS
Recessed Locking latches for improved appearance
SERIES 375EV & 375NFEV - END VENT TILT SLIDER
1
FEATURES
2
3
4
2 3/4” Welded Frame & Sash
3/4” overall sealed units for optimum efficiency
Sashes tilt in for easy cleaning
Integral pull rail for ease of operation
5 Standard screen on each end
7.9 24JL06
Widths - 54” to 96”Heights - 12” to 48”
286.20 3.07White
Series 375EV &375NFEV
6
(42” to 48” High Add charge of $35.06)
1/4 1/2 1/4Packing Charge
AVAILABLE IN WHITE 143 ONLY
Standard$1.10 per unit
8
7 Exterior Glazed for high performance results
Integral Nail Fin at no extra charge on “NF” series
Night Latches Not available
Not available with triple glass or KeepsafeTM.
Up to 101 U.I. Over 101 U.I.
8.1 29OC07
302.95 314.47 325.99 336.23 347.75 361.83 375.90 4.82White #137
Sash Restrictor add $22.26 Packing Charge $1.10 per unit
800M/800TS, 850M/850TSand 852 Canadian Energy Star
800M/800TS, and 852 CSA Certified800M/800TS and 852 Window Wise Certified
Other ratings in Progress
184.31 3.72 4.92
147.34 3.50 4.88
Up to58 U.I.
FEATURES LEFT HINGEViewed fromOutside
CERTIFICATIONS AND RATINGS
1
2
3
4
4 1/2” Welded Frame combines with a variety of moldingsand extensions.Welded Sash opens 90 degrees for easy cleaning.High tech sloped glazing cavity.Triple Weather Stripping including two full perimeterbulb seals of premium neoprene MaxTempTM material.
7/8” Overall Sealed Units for optimum efficiency. Availablewith Triple Glazed overall 1 3/8” sealed units.
5
6
10
9
8
7
Truth Contour Heavy Duty Operator System with a sleekdesigner folding handle.
800TS complete with Patent Pending TouchScreen.Optional Patent Pending hidden roll-style screen can berolled away out-of-sight in Style 800M!Aluminum reinforced hardware anchoring system.Dual durometer inside and outside. Neoprene glazingblocks are applied to highest industry specifications.
Intercept Warm Edge Spacer System is structurallysuperior. Insulated units are sealed with superiorD.S.E. (Dual Seal Equivalent) sealant.
The next generation in technology... now!ULTRA WINDOW SERIES
AVAILABLE IN SOLID WHITE #137.AVAILABLE IN EXTERIOR PAINTED COLORS - IVORY, SANDALWOOD, GREY,IVY GREEN, WEDGEWOOD BLUE, COCOA, CHOCOLATE BROWN, TERRA AND PEBBLE.
(Refer to color samples for various colors)
800M and 800TS Ultra CasementWidths - 12” to 36”Heights - 20” to 80”
75.27Exterior painted window: Operator $ per frame. Fix/Pic $ per frame.
Unmatched commercial highrise specified full perimeterinterior seal with 7/8” Thermal Glass to bond theinner glass lite to the sash.
* Max Size when ordered with tripleglass or KeepsafeTM 28” x 66”
850M and 850TS Ultra AwningWidths - 20” to 48”Heights - 20” to 36”* Max Size when ordered with tripleglass or KeepsafeTM 48” x 36”
852 Ultra FixedWidths - 14” to 96”Heights - 14” to 80”* Max Size when ordered with tripleglass or KeepsafeTM 60” x 66”
800MTS/850TSCasement or Awning
FIXED 852AWNING 850M
CASEMENT 800M
11
Truth Heavy Duty Multipoint Locking System. Truth MaximAdjustable 14” Hinge System is designed for use with MaximOperator for increased access to exterior glass for cleaning.Stress resistant snubber system.
For 800M with Optional Hidden Screen,Add: $ per Screen.65.92
59 to110 U.I.
Over110 U.I.
Up to64 U.I.
65 to69 U.I.
70 to74 U.I.
75 to79 U.I.
80 to84 U.I.
85 to89 U.I.
90 to94 U.I.
Over94 U.I.
Ultra Picture (white #137)
Ultra Fixed (white #137)
802 Ultra PictureWidths - 12” to 72”Heights - 12” to 72”* Max Size when ordered with tripleglass or KeepsafeTM 60” x 48”
Truth Contour Style Fold Down Handle - Included
45.02
PATIO DOOR
9.1 27SE07
Air Leakage
Water Leakage
Uniform Wind-Load
Forced Entry
Ease of Operation
CAN/CGSB-82.1-M89 & AAMA 101 V-86 StandardsPERFORMANCE VALUES
CANADA* USA**
A3
B2
C2
F2
E3
20
30
35
20
40*CAN/CGSB-82.1-M89 - Report #BR-06999-AB/T**Overall AAMA-Classification SGD-R30 - Report #BR-06999-AB/T
Option
Key Lock Assembly
Security Bar
Assembled
Kick Lock
Interior Cladding 5’ 6’ & 8’
Tan
Custom Sizes
35.06
44.41
91.15
35.06
39.73
15%
CALL
Upcharge
Frame Size
5 ft 59 5/8 x 79 5/8
6 ft
8 ft
71 5/8 x 79 5/8
95 5/8 x 79 5/8
9 ft 105 x 79 5/8
12 ft (3 panel)
12 ft (4 panel)
143 1/4 x 79 5/8
142 3/8 x 79 5/8
Size
5 ft
6 ft
8 ft
9 ft (3 panel)
12 ft (3 panel)
12 ft (4 panel)
820.39 823.13 410.20 154.26 194.00 360.12 325.52
929.08 1008.23 465.12 184.65 194.00 390.99 415.33
995.69 1378.74 497.84 265.28 238.40 483.59 594.92
1347.45 1512.49 663.79 280.48 281.64 586.48 617.38
1563.65 2078.41 781.83 375.14 355.27 740.81 886.77
1799.72 2016.65 899.86 517.71 473.30 781.97 830.64
Code White Saflex 1 side Triple Glazing Low E Argon Grills Brass Grills Grey or Bronze
PD5W
PD6W
PD8W
PD9W
PD12W3
PD12W4
PATIO DOOR ACCESSORY OPTIONS
9.2
Black Handle Set with lock
White Handle Set with lock
Lock Set
Screen Rollers
Screen Handle Set
Panel Tandem Rollers
Anti Lift Block
Bumper Guards
Panel Keeper
Screen Keeper
Installation Hole Plugs (Large or Small)
Weather Stripping
Bulb Seal
Keylock (keyed alike)
Nailing Fin
Black Handle Set no lock
White Handle Set no lock
TEMPERED GLASS SEALED UNITS FOR PATIO DOORS
26 x 70 9/16 163.24 222.60 350.23 439.27
Standard Size Clear Low E Argon Grey or BronzeLow E Argon
Grey or Bronze
K.D. Frame Kits
Patio Door Sash (No Glass)
Complete Hardware Kit
Screen only
77.91 each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
eacheacheacheacheach
each
56.08
64.43
30.12
37.39
34.28
5.19
15.58
15.58
5.19
3.11
5.19
1.56
0.20
0.77
1.02
51.93
3.11
124.64
254.50
394.74405.13425.90436.28509.01
ft.
ft.
5 ft6 ft8 ft9 ft12 ft
Air Leakage
Water Leakage
Uniform Wind-Load
Forced Entry
Ease of Operation
CAN/CGSB-82.1-M89 & AAMA 101 V-86 StandardsPERFORMANCE VALUES
CANADA* USA**
A3
B2
C3
F2
E3
20
30
35
20
40*CAN/CGSB-82.1-M89 - Report #BR-06999-AB/T**Overall AAMA-Classification SGD - R30 - Report #BR-06999-AB/T
32 x 70 9/16 192.92 255.24 430.36 534.24
44 x 70 9/16 252.28 323.52 587.66 736.06
Garden Windows$46.75 PER SQUARE FOOT LIST (Please use attached order form - Page 49)
INCLUDES: WHITE #136 ALL PVC FRAME, ALUMINUM REINFORCED7/8” OVERALL S.I.G. CLEAR GLASSONE ROOF VENT c/w OPERATING POLE AND SCREEN30 DEGREE SLOPE16” PROJECTION (FULL 16”)24” PROJECTION (NOMINAL 22 1/4”)30” PROJECTION (NOMINAL 28 1/2”)
OPTIONS
SIDE CASEMENTSEXTRA ROOF VENT*DEDUCT FOR VENTEXTERIOR COLORLOW “E”ADD FOR ARGON GASADD FOR WARM EDGE SPACERGLASS SHELF FOR 16” PROJECTIONGLASS SHELF FOR 24” PROJECTIONGLASS SHELF FOR 30” PROJECTIONWIRE SHELF FOR 16” PROJECTIONWIRE SHELF FOR 24” PROJECTIONWIRE SHELF FOR 30” PROJECTION
* EXTRA ROOF VENT DOES NOT INCLUDE AN EXTRA OPERATING POLE
$175.30 EACH$105.18 EACH$33.39 CREDITADD 20%$4.67 PER SQ. FT$1.17 PER SQ. FTSUPESPACER IS STANDARD$11.69 PER LIN. FT 5 LIN FT. MINIMUM$23.37 PER LIN. FT 5 LIN FT. MINIMUMNOT AVAILABLE$9.35 PER LIN. FT 5 LIN FT. MINIMUMNOT AVAILABLENOT AVAILABLE
STYLE:
WARRANTIES: LIMITED 40 YEARS ON VINYL, LIMITED 20 YEARSON GLASS, TRUTH LIFETIME ON TRUTH HARDWARE.ASK YOUR DEALERS FOR A COPY OF THE FULLWARRANTY
OPTIONS: COLORED EXTERIOR/WHITE INTERIOR(SEE STANDARD COLORS)3/8” GLASS SHELVESWHITE WIRE SHELVESLOW “E” GLASSARGON GASWARM EDGE SPACER SYSTEMHEAT-MIRROR GLAZING
10.1
“A” ALL FIXED “B” SINGLE VENT “C” SINGLE VENT “D” SINGLE VENT “E” SINGLE VENT “F” SINGLE VENT
\
Not available with triple glass or KeepsafeTM.
10.2
HEIGHT 36 39 42 45 48 51 54 57 60 63 66 69 72 75 78 8136 25.0 26.5 27.5 29.0 30.0 31.5 32.5 34.0 35.5 37.0 38.5 40.0 41.0 42.5 44.0 45.5
39 26.5 27.5 29.0 30.0 31.5 32.5 34.0 35.5 37.0 38.5 40.0 41.0 42.5 44.0 45.5 47.0
42 27.5 29.0 30.0 31.5 32.5 34.0 35.5 37.0 38.5 40.0 41.0 42.5 44.0 45.5 47.0 49.5
45 29.0 30.0 31.5 32.5 34.0 35.5 37.0 38.5 40.0 41.0 42.5 44.0 45.5 47.0 49.5 51.5
48 30.0 31.5 32.5 34.0 35.5 37.0 38.5 40.0 41.0 42.5 44.0 45.5 47.0 49.5 51.5 54.0
51 31.5 32.5 34.0 35.5 37.0 38.5 40.0 41.0 42.5 44.0 45.5 47.0 49.5 51.5 54.0 56.0
54 32.5 34.0 35.5 37.0 38.5 40.0 41.0 42.5 44.0 45.5 47.0 49.5 51.5 54.0 56.0 58.5
57 34.0 35.5 37.0 38.5 40.0 41.0 42.5 44.0 45.5 47.0 49.5 51.5 54.0 56.0 58.5 60.5
60 35.5 37.0 38.5 40.0 41.0 42.5 44.0 45.5 47.0 49.5 51.5 54.0 56.0 58.5 60.5 63.0
SQUARE FOOTAGE CHART – 16” PROJECTION( 16” OVERALL )
TO ARRIVE AT GARDEN WINDOW SQUARE FOOTAGE USE NEXT HIGHEST WIDTHAND HEIGHT ON ABOVE CHART.
SQUARE FOOTAGE CHART IS FOR 16” PROJECTION GARDEN WINDOWS ONLYSQUARE FOOTAGE INCLUDES 2 SIDES, 1 ROOF AND THE BASE.
SEE PRICE LIST PAGE DATED APRIL 03, 2000 FOR PRICING, STANDARD FEATURES,OPTIONS, SIZE LIMITATIONS AND TERMS AND CONDITIONS.
WIDTH
WINDOWS
GA
RD
EN
WIN
DO
WS
10.3
HEIGHT 36 39 42 45 48 51 54 57 60 63 66 69 72 75 78 8136 37 40 42 43 45 48 50 51 53 56 58 59 61 64 66 67
39 40 42 44 46 48 51 52 54 56 59 61 62 64 67 69 71
42 41 44 46 48 49 52 54 56 58 61 63 65 66 69 71 73
45 42 45 47 49 51 54 56 58 60 63 65 67 69 72 73 75
48 44 47 49 51 53 56 58 60 62 65 67 69 71 74 76 78
51 46 48 51 53 55 58 60 63 65 68 70 72 74 77 79 81
54 48 51 53 55 57 60 62 64 67 70 72 74 76 79 81 83
57 49 52 54 56 59 62 64 66 68 72 74 76 78 81 84 86
60 51 55 57 59 61 65 67 69 71 75 77 79 81 85 87 89
SQUARE FOOTAGE CHART – 24” PROJECTION( 24 1/4” OVERALL )
SQUARE FOOTAGE CHART – 30” PROJECTION( 28 1/2” OVERALL )
WIDTH
TO ARRIVE AT GARDEN WINDOW SQUARE FOOTAGE USE NEXT HIGHEST WIDTH AND HEIGHT ON ABOVE CHART.SQUARE FOOTAGE CHART IS FOR 24” PROJECTION GARDEN WINDOWS ONLY SQUARE FOOTAGE INCLUDES 2 SIDES, 1 ROOF AND THE BASE.SEE PRICE LIST PAGE DATED APRIL 03, 2000 FOR PRICING, STANDARD FEATURES,OPTIONS, SIZE LIMITATIONS AND TERMS AND CONDITIONS.
TO ARRIVE AT GARDEN WINDOW SQUARE FOOTAGE USE NEXT HIGHEST WIDTH AND HEIGHT ON ABOVE CHART.SQUARE FOOTAGE CHART IS FOR 30” PROJECTION GARDEN WINDOWS ONLY SQUARE FOOTAGE INCLUDES 2 SIDES, 1 ROOF AND THE BASE.SEE PRICE LIST PAGE DATED APRIL 03, 2000 FOR PRICING, STANDARD FEATURES,OPTIONS, SIZE LIMITATIONS AND TERMS AND CONDITIONS.
WIDTH
WINDOWS
HEIGHT 36 39 42 45 48 51 54 57 60 63 66 69 72 75 78 8136 31 33 35 36 38 40 42 43 45 47 49 50 52 54 56 57
39 33 35 37 39 41 43 44 46 48 50 52 53 55 57 59 61
42 35 37 39 41 42 44 46 48 50 51 53 55 56 59 61 63
45 37 38 40 42 44 46 48 50 52 54 56 58 60 62 64 65
48 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68
51 39 41 43 46 48 50 52 54 56 58 60 62 64 66 68 70
54 41 43 45 47 49 51 54 56 58 60 62 64 66 68 71 73
57 42 44 47 49 51 53 55 58 60 62 64 66 69 71 73 75
60 44 46 48 50 53 55 57 59 62 64 66 69 71 73 75 77
10.4
GARDEN WINDOW SPECIFICATIONS
• Multi-chambered PVC extrusions are reinforced with aluminum• 2 1/4”corner posts give more glass area• Positive locking extruded hinge system on top sash• Double compression seal on roof vent• Truth “PIVOT CAM” hardware on all top operating vents, provides a positive seal from corner to corner• Truth heavy duty operator with stabilizer tab• Truth pole operator• Positive fit cross members• Fusion welded frame ends, roof vents and casement operators• No exposed installation holes, all installation screws are hidden with snap-on covers.• All installation screws go through aluminum gussets• Patented installation hanger system, for one man installation• Insulated PVC bottom panel• Built in rain gutter and positive drainage system• All glass “wet glazed” to prevent leakage• 7/8” overall insulating glass, interior glazed, with snap in stops• Optional glazing features: Low“E” glass, Argon Gas, Warm Edge Spacer.• Removable screens on all operating vents• Optional adjustable glass shelf or PVC coated wire shelf• Standard projections: 16”, 24” and 30”• Standard slope: 30 degrees• Standard color: White 136 in and out• Optional EXTERIOR colors: Chocolate Brown, Cream, Sandalwood, Pebble, Dover Grey,
Sable, Wedgewood Blue and Ivy Green. Other colors available by quotation only.• All Vinyl Window Designs Garden Windows are custom made to fit your opening.• GLASS SHELVES ARE 3/8” NON-TEMPERED AND AS SUCH SHOULD BE TREATED WITH CARE. DO NOT
OVERLOAD ANY GLASS SHELF.
WARRANTY
• NON PRO-RATED• 40 YEAR LIMITED WARRANTY ON ALL VINYL • 20 YEAR LIMITED WARRANTY ON SIG UNITS ( EXCLUDING GLASS BREAKAGE )• LIMITED LIFETIME “TRUTH” WARRANTY ON ALL TRUTH PARTS• 2 YEAR LIMITED WARRANTY ON ALL OTHER PARTS ( EXCLUDING GLASS SHELVING AND SCREEN CLOTH )
ASK FOR A COPY OF THE FULL VINYL WINDOW DESIGNS WARRANTY
SPECIFICATIONSWINDOWS
10.5
PRICESLIST PRICES, TERMS AND CONDITIONS contained herein supersedeany and all prices, terms and conditions shown in previous lists.PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE. Errors andomissions are subject to correction. All prices shown, unlessotherwise indicated, are list prices and subject to the discountagreed upon at the time of ordering. Prices are subject to allapplicable sales taxes, unless otherwise indicated. A MINIMUMCHARGE PER INVOICE IS $25.00. Please note, this charge will bestrictly enforced.
CREDITCredit will be extended only to established and approved accounts.Accounts will only be established for those companies who intendto purchase on an ongoing regular basis. All other purchases will beC.O.D.Normal credit checks take approximately two to three weeks andwill not be initiated until an initial order is placed. Purchases madeduring this time will be C.O.D., unless arrangements are made withour credit department BEFORE PLACING ORDERS.
PAYMENT TERMSTerms of payment for established credit accounts are:Net 30 Days from date of invoice unless otherwise stipulated INWRITING by Vinyl Window Designs Ltd. 2 1/2% interest per month(31.2% per annum) will be charged on all accounts over 30 days.
FAILURE TO FULFILL TERMSShould the Purchaser at any time fail to fulfill the terms of paymentdescribed under PAYMENT TERMS, or any special paymentarrangements, Vinyl Window Designs may defer further shipmentsuntil such payments are made, or at its option, cancel anyunshipped orders or back orders without prejudice to any right VinylWindow Design may have against the Purchaser. Vinyl WindowDesigns also reserves the right to ask for and demand from thePurchaser, satisfactory security for the due performance of thePurchaser’s obligations.
SHIPPINGAll prices shown are FOB Vinyl Window Designs plant inWoodbridge, Ontario, unless otherwise arranged. When ShippingInstructions Have Not Been Specified, Vinyl Window DesignsReserves the Right to Select the Route and Method ofShipment.
Under no circumstances can shipments be sent by common carrieron a prepaid basis. Customers must establish their own “Collect”credit arrangements with carriers servicing their routes. All commoncarrier shipments, either by the Purchaser’s request or VinylWindow Designs Ltd’s option, are at the consignee’s risk ofbreakage and/or damage. Therefore All Claims for Breakageand/or Damage Are Between the Carrier and the Consignee. AllCommon Carrier shipments must be crated. A nominal charge willbe levied for this service (see Packaging charges - this section)
When arrangements have been made to pick up products from ourwarehouse, customers are requested to have their trucks properlyequipped with ropes and cardboard, as well as a glass rack. Ourstaff has been instructed to be as helpful as possible at all times.We do, however, reserve the right to refuse to load customer’svehicles that are not properly equipped.
TIMES FOR PICK UP are between the hours of 8:00 am and 4:30p.m. Monday to Friday, unless specific arrangements are made withthe sales department. All Products, Either Picked Up OrDelivered, Must Be Thoroughly Inspected Before Signing OurShipping Order. Your signature indicates acceptance of theproduct and will exempt Vinyl Window Designs Ltd from any furtherliability with regards to broken glass, paint scratches, screen tearsetc, unless such is noted on the shipping order. All repair work willbe done at current prices.
CLAIMSShortages must be reported to our office, along with all pertinentdocuments, within three (3) working days. Claims for breakage ofgoods delivered by common carrier must be placed against thecarrier, with written notice given to our head office within three (3)working days.
PRODUCT CHANGEVinyl Window Designs Ltd products are constantly being improved.We reserve the right to change specifications and designs withoutnotice. Vinyl Window Designs Ltd assumes no responsibility for youruse of or reliance upon outdated printed matter and specifications.
CANCELLATION:Since all GARDEN WINDOWS are custom made, orders cannot becancelled after they are entered into our production system. Iforders MUST be cancelled or changed you will be charged forALL labour and materials used to the point of cancellation orchange.
ORDERING:Verbal orders will not be accepted. All orders must be by FAX orin writing by MAIL or IN PERSON.
SAMPLES:Standard size samples are available for showrooms at the NETprice less an extra 25%. The standard size is 30” wide x 36” highwith a 16”projection. The sample shall consist of a whiteGARDEN WINDOW with one roof vent, screen, operating pole anda wire shelf. We will also supply a sample of the exterior colorsavailable and the glass shelf. Samples requested that vary fromthe standard sample will be charged at the regular price.
GLASS SHELVES ARE 3/8” NON-TEMPERED AND AS SUCHSHOULD BE TREATED WITH CARE. DO NOT OVERLOAD ANYGLASS SHELF.