Embed Size (px)
Citation preview
Reusable Modular Wall System for Construction Containment
&Critical Care Isolation
Product Data Catalog
Introduction
STARC Systems LLC74 Orion St, Tech PlaceBrunswick, ME 04011
Sales: 844-596-1784fax: 844-550-4680
pds-0002 rev 0.2
Installation 18” Panel
24”Panel
32”Panel
42”Panel
WallInterface
FlexCorner
Door AirPanel
FillerPanel
8’ Hall Barrier 2 2 42 HD
8’ x 10’ Ante Room 3 2 2 42HD 24”
20’ Wall Barrier 2 4 2 2 42 HD 32”
MACU Room 2 5 4 42HD 24”
Sample Configurations: System Components
®The STARC modular containment system utilizes a number of interchangeable components to create a safe, secure, dustless separation wall for many uses including construction renovation, critical care isolation or temporary isolation applications.
®Developed in the healthcare construction environment, the STARC System has been engineered to be used for years without maintenance. The all metal reusable modules are designed for maximum durabilty, ruggedness, ease of use and resistance to cleaning agents. A full compliment of wall panels,
Hallway Barrier Example
doors, wall interfaces and anchoring brackets provides a complete toolkit to handle any containment scenario.
Features and Benefits:
Ÿ Fast - Install 50 ft of wall in 30 min!Ÿ Clean and Green - Dustless
containment with no disposal waste.
Ÿ Quiet - Reduce workplace sound intrusion; allows contractors to work during normal hours.
Ÿ Cost Effective - Payback in 3-5 uses replacing temporary plastic or drywall barriers.
Ÿ Infection Control - All surfaces are easily and readily disinfected; Controls dust migration from the ‘dirty’ side.
Wall PanelsFeatures:
¡ Clean white exterior for finished appearance; durable galvanized steel interior surface
¡ Standard widths of 18”, 24”, 32” and 42”¡ Panels extend seamlessly from 6’-10” to 10’-3”¡ Unique connection system between all modules - no tools or brackets¡ One tool setup to adjust height¡ Fully gasketed - air tight system¡ Dustless installation and removal¡ Sound attenuating - reduces airborne noise¡ Rugged and durable all metal construction - many years of service¡ Complete GREEN solution - No disposal waste
Performance Specifications:
The modular system is engineered to meet or exceed all required standards for temporary partitions for interior applications.
Our system performs to the following criteria:¡ Interior non-load bearing applications only¡ Humidity: Up to 90% RH non-condensing¡ Max pressure differential: .05” w.c. ¡ Max floor pitch: 1/8” per foot ¡ Max floor roughness < 1/8” variance¡ Chemical compatibility: May be cleaned or disinfected with all
common water and solvent based cleaners and disinfectants¡ Materials certified for zero flame spread and smoke generation
STARC Systems LLC74 Orion St, Tech PlaceBrunswick, ME 04011
Sales: 844-596-1784fax: 844-550-4680
pds-0100 rev 0.4
Panel Width Part Number
18” S1-WM-18
24” S1-WM-24
32” S1-WM-32
42” S1-WM-42
Ordering:
Custom Sizes available - Contact sales
System elements Patent Pending
No Tool Connection between panels
One Wrench does it all!
Features:
®¡ Standard STARC modular panel with integrated air exhaust register and pressure monitor ports
¡ Panels extend seamlessly from 6’-10” to 10’-3”¡ Standard duct collar - 12” dia; 8” Available upon request¡ Integrated air pressure ports - one each side¡ Configured to integrate optional Abatement digital monitor¡ Supports all common data recorders¡ Internal passage for power cords - front to back¡ Rugged and durable all metal construction¡ Complete GREEN solution - No disposal waste
STARC Systems LLC74 Orion St, Tech PlaceBrunswick, ME 04011
Sales: 844-596-1784fax: 844-550-4680
pds-0101 rev 0.3
Negative Air Panels
Panel Width Part Number
24” S1-AIR-24
32” S1-AIR-32
Ordering:
System elements Patent Pending
Integrated pressure portsConnects to any monitor
12” Exhaust Duct collarSealed ports for cables
Digital Pressure MonitorReady
(Monitor Optional)
Features:
¡ Prehung Doors with Standard Module Interface Frames¡ Available in 36” and 48” clear openings¡ Seamless telescoping from 6’-10” to 10’-3”¡ Full gasketing and brushes for air / dust seal¡ Swing Doors easily changed to swing in/out¡ Deadlatch set and ICU latch standard on Sliding door¡ Schlage Lockset and Yale closer options on swing door¡ Vision Kits available
STARC Systems LLC74 Orion St, Tech PlaceBrunswick, ME 04011
Sales: 844-596-1784fax: 844-550-4680
pds-0105 rev 0.3
Doors
Module Part Number Clear Opening
42” Swing Door S1-HD-42 36” x 78”
54” Swing Door S1-HD-54 48” x 78”
42” Sliding Door S1-SD-42 36” x 77.5”
54” Sliding Door S1-SD-54 48” x 77.5”
Ordering:
Swing DoorShown with optional Extendable
Top Panel(Latch and closer optional)
Sliding Door Module(ICU and Deadlatch Standard)
Features:
¡ Corners follow module interface standard - simple and quick connection
¡ Air Tight seal against air / dust intrusion¡ Seamless telescoping from 6’-10” to 10’-3”¡ Inside corner is fixed right angle¡ Flexible corner provides 0-90 deg angle, flips
over for inside or outside use¡ All metal contstruction - zero flame spread or
smoke generation
STARC Systems LLC74 Orion St, Tech PlaceBrunswick, ME 04011
Sales: 844-596-1784fax: 844-550-4680
pds-0103 rev 0.3
Corners
Module Part Number
Inside Corner S1-ICM
Flexible Corner S1-FC
Ordering:
Flexible CornerWorks as Inside or Outside
0-90 degreesTelescopes to 10’-3”
Inside CornerFixed 90 degree angleTelescopes to 10’-3”
40.50°0-90 deg
Features:
¡ Corners follow module interface standard - simple and quick connection¡ Sealed for air / dust intrusion¡ Seamless telescoping from 6’-10” to 10’-3”¡ Standard Wall Interface extends fr ¡ Flexible corner provides 0-90 deg angle, flips over for inside or outside
STARC Systems LLC74 Orion St, Tech PlaceBrunswick, ME 04011
Sales: 844-596-1784fax: 844-550-4680
pds-0104 rev 0.3
Wall Interfaces
Module Part No.
L/R Wall Interface S1-WI
Left Wall Interface S1-LWI
Filler Panel S1-FP
Ordering:
Left / Right Wall InterfaceExtends an extra 1-3/4” with a
foam seal
Left Wall InterfaceCompact foam seal
Filler Panel Use 5/8” drywall to make up odd
panel sizes or fit against wall details: 3” to 18”
applications¡ Use the Filler Panel module to
create a narrow width panel or a coped panel against wall details (handrails etc)
Features:
¡ Securely transport panels and accessories, minimizing potential for damage.
¡ Great for storage between projects¡ Panels secured with supplied ratchet straps¡ Trays hold up to 9 accessories plus hardware ¡ Rugged 8” non-marking casters provide
handling across ramps and into trucks¡ Accessory Cart holds 6 panels and up to 6
corners, wall interfaces or other accessories, plus has a parts tray on top
¡ Panel Cart carries 8 panels¡ Fits through a standard 36” door opening (33”)¡ Engineered for fork lift handling
STARC Systems LLC74 Orion St, Tech PlaceBrunswick, ME 04011
Sales: 844-596-1784fax: 844-550-4680
pds-0102 rev 0.4
Transport Carts
Ordering:
Accessory Cart
Panel Cart
Cart Part Number Capacity
Accessory Cart S1-AC 6 panels+ 6 corners, etc
Panel Cart S1-MC 8 panels
