Embed Size (px)
Citation preview
1
RESUME
PHILIP Y. HUANG
November 14, 2014
WORK ADDRESS HOME ADDRESS
722, HSBC Business School Peking University Xili, Shenzhen, China, 518055
Telephone: +86-755-2603-3059
Rm. 7E, Building D, All-City, South
Hohai Bin Road, Nanshan District
Shenzhen, 518064, China
Telephone: +86-755-2648-5276
EDUCATION
Ph.D. 1978 The Pennsylvania State University
Major: Quantitative Business Analysis
Minor: Operations Management
Outside Field: Economics
M.A. 1974 The Pennsylvania State University
Major: Economics
B.A. 1969 The National Taiwan University
Major: Economics
ACADEMIC POSITIONS
2011 - Present Professor of Operations Management
HSBC Business School at Peking University
2011 - Present Adjunct Professor of Operations Management
China Europe International Business School
2008 - Present Thornhill Professor Emeritus of Management Science and Information
Technology
Virginia Polytechnic Institute and State University
2013 - 2014 Associate Dean and Director of EMBA Program
HSBC Business School at Peking University
2008 - 2010 Professor of Operations Management
China Europe International Business School
2003 – 2007 Thornhill Professor of Management Science and Information
Technology
Virginia Polytechnic Institute and State University
1989 - 2003 Professor of Business Information Technology
Virginia Polytechnic Institute and State University
1984 - 1989 Associate Professor of Management Science
Virginia Polytechnic Institute and State University
1979 - 1984 Assistant Professor of Management Science
Virginia Polytechnic Institute and State University
1978 - 1979 Assistant Professor of Business Administration
The University of Wisconsin - Eau Claire
VISITING ACADEMIC POSITIONS
2006 Adjunct Professor of Operations Management
Universidade de Coimbra
Executive MBA
Coimbra, Portugal
2003 Fulbright Professor of Operations Management
Universidade de Coimbra
Executive MBA
Coimbra, Portugal
1999 - 2000 Visiting Professor of Operations Management
Stuttgart Institute of Management and Technology
International MBA
Stuttgart, Germany
1993 Visiting Professor of Operations Management
National Taiwan University
Taipei, Taiwan
1987 Fulbright Professor of Operations Management
Tsukuba University and Senshu University
Tokyo, Japan
1986 Visiting Professor of Operations Management
Huanghe University
Henan, China
1986 Visiting Professor of Operations Management
National Tsing Hua University
Hsinchu, Taiwan
1985 - 1986 Visiting Professor of Operations Management
National Taiwan University
Taipei, Taiwan
TEACHING
Courses Taught (Peking University):
Graduate Courses –
POM Managing Projects for Competitive Advantages
POM Operations Management
MBA Courses -
MBA Operations Management
MBA Project Management
EMBA Courses -
EMBA Operations Management
Human Resource Management Master Program -
HR Project Management
Courses Taught (China Europe International Business School):
MBA Courses –
MBA Foundation Excel Workshop
MBA Quantitative Methods for Managers
POM Managing Projects for Competitive Advantages
POM Managing Business Information Technology
EMBA Courses -
EMBA Operations Management
EMBA Managing Enterprise Resource Planning
EMBA Research Project
EDP (Executive Development Program) Courses -
EDP Project Management
EDP Operations Management
EDP Supply Chain Management
Courses Taught (Virginia Polytechnic Institute and State University):
BIT 3414 Production and Operations Management
BIT 3454 Quality and Process Improvement Methods
BIT 3464 Enterprise Planning and Control Systems
BIT 3954 Study Abroad
BIT 4434 Computer Simulation in Business
BIT 4464 Advanced Topics in Production and Operations Management
BIT 4474 Global Operations and Information Technology
BIT 5404 Management Science
BIT 5414 Operations Management in a Global Environment
BIT 5424 Network Simulation and Analysis with GERT and Q-GERT
BIT 5484 Current Issues in Production and Operations Management
BIT 5494 International Operations and Information Technology
BIT 6404 Corporate Simulation Methods
BIT 6414 Seminar in Information Technology
Courses Taught (MBA, Stuttgart Institute of Management and Technology):
Production, Logistics, and Supply Chain Management
Project Methodology
Course Taught (MBA, Universidade de Coimbra):
Operations Management in a Global Environment
Inventory Management and Just-in-Time Production
Courses Taught (MBA, Huanghe University):
Decision Support Systems
Operations Management
Course Taught (National Tsing Hua University):
Special Topics in Operations Management
Courses Taught (National Taiwan University):
Production/Operations Management
Production Planning and Inventory Control
Current Issues in Operations Management
Corporate Simulation Using SLAM II
Courses Taught (China Productivity Center):
Manufacturing Resources Planning (MRP II)
Material Requirements Planning (MRP)
Courses Taught (AT&T School of Business):
Managing Policy Deployment
Supplier Quality Management
Voice of the Customer
SERVICE ON GRADUATE STUDENT COMMITTEES
Doctoral Dissertation Committees at Virginia Tech
Su, Jiancheng (Major: ISE) “Component-based Intelligent Control Architecture for
Reconfigurable Manufacturing Systems,” Completed 2007, Committee Duty: Member.
Wan, Hung-da (Major: ISE) “Measuring Leanness of Manufacturing Systems and Identifying
Leanness Target by Considering Agility,” Completed 2006, Committee Duty: Member.
Teets, Jay M. (Major: BIT) “Multidimensional Visualization of Process Monitoring and Quality
Assurance Data in High-Volume Discrete Manufacturing,” Completed 2007, Committee Duty:
Member.
Babiceanu, Radu (Major: ISE) “Holonic-based control system for automated material handling
systems,” Completed 2005, Committee Duty: Member.
Dong, Ming (Major: ISE) “Process Modeling, Performance Analysis and Configuration
Simulation in Integrated Supply Chain Network Design,” Completed 2001, Committee Duty:
Member.
O’Malley, John R. (Major: MSci) “Electronic Data Interchange: An Inventory Perspective of Its
Economic Viability and Recommendations for Information Technology Driven Implementation,”
Completed 2000, Committee Duty: Member.
Kwock, Yongsub (Major: Hospitality & Tourism) “A Theoretical Integration and Empirical Test
of Strategic Management: Environment, Strategy, Structure, Implementation, and Performance in
the Lodging and Restaurant Industry,” Completed 1999, Committee Duty: Member.
Kalir, Adar A. (Major: ISE) “Optimal and Heuristic Solutions for the Single and Multiple Batch
Flow Shop Lot Streaming Problems with Equal Sublots,” Completed 1999, Committee Duty:
Member.
Jung, Seungho (Major: ISE) “An Empirical Investigation of Tools and Joint Practices Used in
Managing Customer-Supplier Relationship,” Completed 1997, Committee Duty: Member.
Goan, Meng-Jong (Major: ISE) “An Integrated Approach to Environmentally Conscious Design
and Manufacturing,” Completed 1996, Committee Duty: Member.
Vass, Dianna J. (Major: Clothing & Textiles) “Total Quality Management and Training within
North Carolina Apparel/Textile Product Manufacturing Organizations to Determine a Model for
TQM Training,” Completed in 1995, Committee Duty: Member.
Shen, Yu-Cheng (Major: ISE) “The Impact of Vehicle Dispatching on the Design of Multiple-
Transporters Material Handling Systems,” Completed in 1995, Committee Duty: Member.
Hatch, Melanie L. (Major: MSci) “Concurrent Optimization for Logistic Support,” Completed
1994, Committee Duty: Member.
Lee, Pui Mun (Major: ISE) “Incorporating Concurrent Engineering and Design Economics in a
Decision Support System,” Completed 1993, Committee Duty: Member.
Wiegmann, Lars (Major: MSci) “Cost-Based Shop Control Using Artificial Neural Networks,”
Completed 1992, Committee Duty: Member.
Leu, Yow-yuh (Major: MSci) “Cellular Manufacturing: Applicability and System Design,”
Completed 1991, Committee Duty: Chair.
Shin, Seung-il (Major: ISE) “A System Dynamic Model for Total-Factor Productivity
Measurement of the Manufacturing System: Its Implications for JIT,” Completed 1991,
Committee Duty: Member.
Phillipoom, Patrick R. (Major: MSci) “Overlaying the Just-in-Time with Kanban System on an
American Production Environment,” Completed 1986, Committee Duty: Member.
Chen, Chin-Sheng (Major: IEOR) “Methodologies for Manufacturing System Selection and for
Planning and Operation of a Flexible Manufacturing System,” Completed 1985, Committee Duty:
Member.
Russell, Roberta S. (Major: MSci) “An Evaluation of Scheduling Policies in a Dual Resource
Constrained Assembly Shop,” Completed 1983, Committee Duty: Member.
Grasso, Edward T. (Major: MSci) “An Experimental Investigation: Uncertainty in MRP
Systems,” Completed 1982, Committee Duty: Member.
Hammesfahr, Roy D. (Major: MSci) “A Simulation Model for the Analysis of Railway
Intermodal Terminal Operations,” Completed 1981, Committee Duty: Member.
Master Thesis Committees
Lin, Shallvin (Peking University) (Major: MA) “Top Management Team’s Characteristics,
Financial Distress and Cost of Equity Financing—Empirical Study of Listed Manufacturing
Companies,” Completed 2014, Committee Duty: Thesis Advisor.
Luo, Shu (Peking University) (Major: MA) “The Construction of a Performance Evaluation
System for Consumer Goods Industry: Empirical Evidences from China's A-share Listed
Enterprises,” Completed 2014, Committee Duty: Thesis Advisor.
Sun, Qiuchen (Peking University) (Major: MA) “A Study on the Impact of China’s Health
Reform on Patient Satisfaction,” Completed 2014, Committee Duty: Thesis Advisor.
Zhou, Yuyang (Peking University) (Major: MA) “The Optimization of Resource Allocation and
Operation Efficiency in Commercial Bank Queuing System - Empirical Study Based on Queuing
Theory and Computer Simulation,” Completed 2014, Committee Duty: Thesis Advisor.
Hong, Gezhulan (Peking University) (Major: MA) “CSF of ERP implementation and its impact
on business performance,” Completed 2014, Committee Duty: Thesis Advisor.
Liu, Yangtong (Peking University) (Major: MA) “The promoting effect of overseas investment
insurance on investment: a research based on micro and macro perspective,” Completed 2014,
Committee Duty: Thesis Advisor.
Kao, Jian (Peking University) (Major: MA) “Solving the Product Line Selection and Pricing
Problems with Genetic Algorithms,” Completed 2014, Committee Duty: Thesis Advisor.
Hua, Alice (Peking University) (Major: MA) “A Study on the Borrowing and Lending Behavior
of the Residents in Developed Area,” Completed 2014, Committee Duty: Thesis Advisor.
Liu, Jacky (Peking University) (Major: EMBA) “Internet’s Influence and Enlightenment on
Supply Chain Management -Illustrated with the Example of XX Company,” Completed
2014, Committee Duty: Thesis Advisor.
Zhao, Bolai (Peking University) (Major: EMBA) “Familization or Professionalism: A Research
on the Selection of Executive Manager for Family Business in China,” Completed 2014,
Committee Duty: Thesis Advisor.
Bai, Baokun (Peking University) (Major: EMBA) “How to Control the Management Cost for
Large Discrete Manufacturing Company,” Completed 2014, Committee Duty: Thesis Advisor.
Zhou, Feng (Peking University) (Major: EMBA) “On the Operational Efficiency Improvement of
the Rice Industry,” Completed 2014, Committee Duty: Thesis Advisor.
Wu,Yani (Peking University) (Major: MA) “Study of Portfolio Insurance Strategy Performance -
Based on Geometric Levy Process Monte Carlo Simulation Analysis,” Completed 2013,
Committee Duty: Thesis Advisor.
Liu, Qi (Peking University) (Major: MA) “Empirical Study on the Relationship between
Efficiency of Inventory Management and Financial Performance of Manufacturing Companies
in Mainland China,” Completed 2013, Committee Duty: Thesis Advisor.
Bian, Xiaonan (Peking University) (Major: MA) “Currency Option Pricing Model with Fuzzy
Transaction Costs: an Empirical Study,” Completed 2013, Committee Duty: Thesis Advisor.
Zhu, Yanqiong (Peking University) (Major: MA) “Empirical Study on Determinants and
Persistence of Banks’ High Profitability in China,” Completed 2013, Committee Duty: Thesis
Advisor.
Cheng, Ken (Peking University) (Major: MA) “Study on Value of Export Credit and Overseas
Investment Insurance,” Completed 2013, Committee Duty: Thesis Advisor.
Hou, Rui (Peking University) (Major: MA) “Cost Efficiency Comparison between Bank Groups
and Internal Control Effect Analysis: Periods after Opening up to Foreign-Funded Banks of
China’s Banking Industry,” Completed 2013, Committee Duty: Thesis Advisor.
Wang, Lingkai (Peking University) (Major: MA) “Study of Third-Party Logistics’ Effect on
Pharmaceutical Circulation and the System Optimization & Investment Model Based on
Companies’ Comprehensive Ability Evaluation Index System,” Completed 2013, Committee
Duty: Thesis Advisor.
Zhou, Hao (Peking University) (Major: MA) “A Study on the Strategy of Fund Family Based on
the Star Fund Spillover Effect - from China’s Empirical Evidence,” Completed 2013, Committee
Duty: Thesis Advisor.
Liu, Huafeng (Peking University) (Major: MA) “Differences of Momentum and Contrarian
Effects on A and H Market of China - Based on These Listed on The Two Market,” Completed
2013, Committee Duty: Thesis Advisor.
Ji, Xiaoling (Peking University) (Major: EMBA) “The Research on E-commerce Model of the
Semiconductor Distribution Industry,” Completed 2013, Committee Duty: Thesis Advisor.
Lin, David (Peking University) (Major: EMBA) “Study on Human Resource Management on
Basic of Maslow’s Hierarchy of Needs - the 13 Years Real Practice of HS Electronic Company,”
Completed 2013, Committee Duty: Thesis Advisor.
Li, Sheng (Peking University) (Major: EMBA) “Study on Innovative Management Model of
Bonded Logistics Park in China,” Completed 2012, Committee Duty: Thesis Advisor.
Wang, Qiong (Virginia Tech) (Major: ISE) “Optimal Investment Strategies for Flexible
Resources, Considering Pricing and Correlated Demands,” Completed 2002, Committee Duty:
member.
Li, Qing (Virginia Tech) (Major: ISE) “Game Theoretic and Analytical Approaches to
International Cooperation and Investment Problems,” Completed 2001, Committee Duty:
member.
Shi, Ji (Virginia Tech) (Major: MSci) “The Implementation of Total Quality Management in
China,” Completed 1993, Committee Duty: Chair.
Kranich, Mathias (University of Hagen, Germany) (Major: Business Economics) “Applying
Neural Network to Job Shop Scheduling,” Active, Committee Duty: Thesis Advisor.
Ho, In-Chi (National Taiwan University, Taiwan) (Major: MBA) “A Statistical Comparative
Analysis of Quality Management in State-Owned Enterprises: China vs. Taiwan,” Completed
1993, Committee Duty: Member.
BUSINESS AND INDUSTRY
1972 - 1973 Accountant, Department of Finance
Fortune (嘉运) Trading Company (Subsidiary of Chia-Hsin Cement Corporation)
Taipei, Taiwan
1970 - 1972 Researcher, R & D Department
Chia-Hsin (嘉新) Cement Corporation
Taipei, Taiwan
HONORS AND AWARDS
HSBC Business School at Peking University Excellence in Teaching Award, 2012
Pamplin College of Business Excellence in Teaching Award and Holtzman Outstanding Educator,
2006
Thornhill Endowed Professorship, 2003
Virginia Tech Alumni Award for Excellence in International Programs, 1998
UOPI-CEUT International Mini-grant for Internationalizing the curriculum, 1998-1999.
Stanley T. Hardy Award for the Outstanding Research Publication in Operations Management,
1984.
Outstanding Paper Award, 1981 Annual Meeting of the Southeast American Institute for
Decision Sciences.
Who’s Who in Finance and Industry, 1986.
Men of Achievement Award, 1987, Cambridge, England.
Who’s Who in the South and Southwest, 1988.
Directory of Distinguished Americans, 1988.
RESEARCH AWARDS
2008 CEIBS-Wharton Joint Research Program, “After-Sales Service Supply Chain in the
Aerospace Industry in China and Network Orchestration in the Aerospace Industry in China.”
2008-9 CEIBS Research Grant, “ERP Implementation in China.”
2006 Summer Research Grant from the R. B. Pamplin College of Business, Virginia Polytechnic
Institute and State University, "A Simulation Study of the Control Chart for the Coefficient of
Variation."
2003 Fulbright Fellowship, “Assessing the Impact of Information Technology on the
Management of Supply Chain in Portuguese Companies,” Universidade de Coimbra, Coimbra,
Portugal.
2000 Summer Research Grant from the R. B. Pamplin College of Business, Virginia Polytechnic
Institute and State University, "An Integrated Analytical Hierarchy Process for Supplier Quality
Management."
1998 Summer Research Grant from the R. B. Pamplin College of Business, Virginia Polytechnic
Institute and State University, "A Comparative Study of Static vs. Dynamic Scheduling
Rules in A Job Shop Environment."
1994 Summer Research Grant from the R. B. Pamplin College of Business, Virginia Polytechnic
Institute and State University, “A Simulation Study on Cellular Layout versus Functional Layout
Using Robust Design.”
1993 Research Grant from the National Science Council of the Republic of China (NSC 82-
0301-H002-105), “An Assessment of Total Quality Management Implementation in Taiwan.”
1986 Fulbright Fellowship, “A Study of Factory Automation in Japanese Industries,” University
of Tsukuba, Japan and Senshu University, Japan.
1985 Research Grant from the National Science Council of the Republic of China (NSC 75-
0415-E002-01), “A Study on the Current Status and the Future of the Computer Integrated
Manufacturing Systems in Taiwan’s Strategic Industries.”
PROFESSIONAL ACTIVITIES
President, Southwestern Virginia Chapter of the Organization of Chinese Americans
President, America Chinese Management Educators Association
Member, Virginia Advisory Committee of the United States Commission on Civil Rights
Director, HSBC Business School Small and Medium Enterprise Research Center at Peking
University, China
Chair, Research Committee, HSBC Business School at Peking University, China
Chair, EMBA/MBA Academic Committee, HSBC Business School at Peking University, China
Member, Super Committee, HSBC Business School at Peking University, China
Member, International Programs Committee, HSBC Business School at Peking University, China
Chair and Member, Discipline Committee, HSBC Business School at Peking University, China
Member, EMBA/MBA Student Recruiting Committee, HSBC Business School at Peking
University, China
Member, Advisory Board, Eurasia Business and Economics Society (EBES)
Member, University Council, Virginia Tech
Faculty Member, Graduate Honor System, Virginia Tech
Representative (Alt.), Faculty Senate, Virginia Tech
Member, Chair, International Programs Committee, Pamplin College of Business
Affiliated Faculty, Vice Director, Acting Director, the Center for Global Electronic Commerce,
Pamplin College of Business
Affiliated Faculty, Center for Scientific Visualization of Organizations, Pamplin College of
Business
Affiliated Faculty Member, developing doctoral program for the School of Management at
Coimbra University in Coimbra, Portugal
Affiliated Faculty Member, receiving funding from the Commission for Educational & Cultural
Exchange between the U.S.A. & the A.R.E. (The Binational Fulbright Commission) and
developing EMBA program for the School of Commerce at Assiut University in Assiut, Egypt
Academic Advisor, Zhejiang Research Institute of Modern Management, Hangzhou, Zhejiang,
China
Honorary Board Member, Shanghai International Friendship and Exchange Council, Shanghai,
China
Honorary Board Member, Suzhou International Exchange Council, Suzhou, China
Member of the Steering Committee, Southwestern Virginia ISO 9000 Users’ Group, American
Society of Quality Control, 1993
Board of Directors, Southwest Virginia Chapter of the American Production and Inventory
Control Society
EDITORIAL SERVICE
Editorial Review Board, Journal of Operations Management
Editorial Review Board, Production and Operations Management
Editorial Review Board, Journal of Modern Project Management
Editorial Review Board, British Journal of Interdisciplinary Studies
Editorial Advisory Board, International Colloquium on Asian Business
Editorial Board, Southern Business and Economic Journal
Reviewer, Decision Sciences
Reviewer, International Journal of Production Research
Reviewer, IIE Transactions
Reviewer, Naval Research Logistics Quarterly
Reviewer, Annals of Operations Research
Reviewer, European Journal of Operational Research
Reviewer, International Journal of Production Economics
Reviewer, International Journal of Quality Science
Reviewer, IEEE Transactions on Systems, Man, and Cybernetics
Reviewer, Omega
Reviewer, Computers and Industrial Engineering
Reviewer, Computers and Operations Research
Reviewer, International Journal of Business and Systems Research
Referee, National Science Foundation
Referee, Natural Sciences and Engineering Research Council of Canada
SCHOLARLY PUBLICATIONS AND RESEARCH
Books:
Huang, P. Y., Toyota Production System, by Yasuhiro Monden. Translated to Chinese. Taipei,
Taiwan: China Productivity Center, 1987.
Book Chapters:
Ghandforoush, P., P. Y. Huang and L. J. Moore, “A Multi-plant, Multi-criteria Evaluation and
Selection Model for R&D Management,” in D. F. Kocaoglu (ed.), Management of R&D and
Engineering, New York: North-Holland, 1992, pp. 89-100.
Huang, P. Y., “World Class Manufacturing Systems in the 1990s,” in Gunter Fandel and Gunther
Zapfel (editors), Modern Production Concepts: Theory and Applications, Berlin: Springer-
Verlag, 1991, pp. 491-507.
Sakurai, M, and P. Y. Huang, “A Japanese Survey of Factory Automation and Its Impact on
Management Control Systems,” in Yasuhiro Monden and Michiharu Sakurai (editors), Japanese
Management Accounting, Productivity Press, 1989, pp. 261-280.
Huang, P. Y. and L. J. Moore, “Applying Q-GERT Modeling to Production and Inventory
Management,” in Haluk Bekiroglu (ed.), Simulation for Production and Inventory Control,
Simulation Series, Vol. 12, No. 2 (January, 1984), pp. 77-82. La Jolla, California: The Society
for Computer Simulation.
Monographs:
An Assessment of Total Quality Management Implementation in Taiwan. Report on a Funded
Research sponsored by the National Science Council of the Republic of China (NSC 75-0415-
E002-01), August 4, 1993.
A Study on the Current Status and the Future of the Computer Integrated Manufacturing
Systems in Taiwan’s Strategic Industries. Report on a Funded Research sponsored by the
National Science Council of the Republic of China (NSC 75-0415-E002-01), July 16, 1986.
Journal Articles (refereed):
Huang, P.Y., “Holonic Supply Chain Management: A Conceptual Framework,” Review of
Business Research, Vol. IV, No. 1 (2004), pp.23-26.
Huang, P.Y., J. Lisboa, and C. F. Gomes “Global Supply Chain Management and Information
Technology: a Portuguese Survey,” Review of Business Research, Vol.1, No. 1 (2003), pp.47-52.
Silva, J. P., J. Lisboa, and P. Y. Huang, “A Labour-Constrained Model for Aggregate Production
Planning,” International Journal of Production Research, Vol.38, No. 9 (2000), pp.2143-2152.
Leu, Y., P. Y. Huang, and R. S. Russell, “Using Beam Search Techniques to Sequence Mixed
Model Assembly Lines,” Annals of Operations Research, Vol. 70 (1997), pp.379-397.
Huang, P. Y., “The Growing Total Quality Management in Taiwan,” Quality Control Journal
(in Chinese), Vol. 29, No. 11 (November 1993), pp. 15-23.
Russell, R. S., P. Y. Huang, and Y. Leu, “A Study of Labor Allocation Strategies in Cellular
Manufacturing,” Decision Sciences, Vol. 22, No. 3 (July/August 1991), pp. 549-611.
Huang, P. Y., L. J. Moore, and S. Shin, “World Class Manufacturing in the 1990s: Integrating
TQC, JIT, FA, and TPM with Worker Participation,” Manufacturing Review, Vol. 4, no. 2 (June
1991), pp. 87-95.
Huang. P. Y. and M. Sakurai, “Factory Automation: The Japanese Experience,” IEEE
Transactions on Engineering Management, Vol. 37, No. 2 (May 1990), pp. 102-108.
Philipoom, P., L. P. Rees, B. W. Taylor, and P. Y. Huang, “A Mathematical Programming
Approach for Determining Workcenter Lotsizes in a Just-in-Time System with Signal Kanbans,”
International Journal of Production Research, Vol. 28, No. 1 (1990), pp. 1-15.
Huang, P. Y. and M. Sakurai, “An Assessment of Factory Automation in Japan: A General Mail
Survey,” Manufacturing Review, Vol. 2, No. 3 (September 1989), pp. 162-169.
Rees, L. P., P. Y. Huang, and B. W. Taylor, “A Comparative Analysis of a MRP Lot-for-Lot
System and a Kanban System for a Multistage Production Operation,” International Journal of
Production Research, Vol. 27, No. 8 (1989), pp. 1427-1443.
Sakurai, M. and P. Y. Huang, “Practices of Management Accounting in FA Factories,” Senshu
Journal of Management, (in Japanese), No. 46 (September 1988), pp. 53-79.
Rees, L. P., P. Philipoom, B. W. Taylor, and P. Y. Huang, “Dynamically Adjusting the Number
of Kanbans in a Just-in-Time Production System Using Estimated Values of Leadtime,” IIE
Transactions, Vol. 19, No. 2 (1987), pp. 199-207.
Philipoom, P., L. P. Rees, B. W. Taylor, and P. Y. Huang, “An Investigation of the Factors
Influencing the Number of Kanbans Required in the Implementation of the JIT Technique with
Kanbans,” International Journal of Production Research, Vol. 25, No. 3 (1987), pp. 457-472.
Huang, P. Y., “Analysis of the Buffer Behavior of Integrated Voice Data Communication
Systems: A Network Simulation Approach,” Transactions of the Society for Computer
Simulation, Vol. 3, No. 3 (July 1986), pp. 217-230.
Baker, W. M. and P. Y. Huang, “Group Technology and the Cost Accounting System,”
Industrial Management, Vol. 28, No. 3 (May-June, 1986), pp. 24-26.
Huang, P. Y. and C. S. Chen, “Flexible Manufacturing System: An Overview and Bibliography,”
Production and Inventory Management, Vol. 27, No. 3 (3rd
Quarter, 1986), pp. 80-90.
Huang, P. Y., L. P. Rees, and B. W. Taylor, “Integrating the MRP-Based Control Level and the
Multi-Stage Shop Level of a Manufacturing System via Network Simulation,” International
Journal of Production Research, Vol. 23, No. 6 (1985), pp. 217-223.
Huang, P. Y. and B. L. W. Houck, “Cellular Manufacturing: An Overview and Bibliography,”
Production and Inventory Management, Vol. 26, No. 4 (4th Quarter, 1985), pp. 83-92.
Ghandforoush, P., P. Y. Huang, and B. W. Taylor, “A Multi-Criteria Decision Model for the
Selection of a Computerized Manufacturing Control System,” International Journal of
Production Research, Vol. 23, No. 1 (1985), pp. 117-128.
Sakurai, M. and P. Y. Huang, “Japan’s Productivity Growth: A Managerial and Accounting
Analysis,” Industrial Management, Vol. 26, No. 5 (September-October, 1984), pp. 11-18.
Huang, P. Y., “A Comparative Study of Priority Dispatching Rules in a Hybrid Assembly/Job
Shop,” International Journal of Production Research, Vol. 22, No. 3 (1984), pp. 375-387.
Sakurai, M. and P. Y. Huang, “Main Issues of Japanese Productivity,” Business Accounting
(Kiggyokaikei, in Japanese), Vol. 36, No. 6 (June 1984), pp. 23-31.
Huang, P. Y., L. J. Moore, and R. S. Russell, “Workload vs. Scheduling Policies in a Dual-
Resource Constrained Job Shop,” Computers and Operations Research, Vol. 11, No. 1 (1984),
pp. 37-47.
Huang, P. Y. and E. R. Clayton, “A Q-GERT Network Simulation Model for the Selection of Job
Shop Scheduling Rules,” Review of Business and Economic Research, Vol. XIX, No. 1 (fall,
1983), pp. 1-12.
Huang, P. Y., L. P. Rees, and B. W. Taylor, “A Simulation Analysis of the Japanese Just-in-Time
Technique (with Kanbans) for a Multiline, Multistage Production System,” Decision Sciences,
Vol. 14, No. 3 (July, 1983), pp. 326-344
Huang, P. Y., P. R. Philipoom, and L. P. Rees, “Q-GERT vs. GPSS,” Journal of Systems
Management, Vol. 34, No. 8 (August 1983), pp. 36-41.
Huang, P. Y., L. P. Rees, and B. W. Taylor, “A Simulation Analysis of the Japanese Just-in-Time
Technique (with Kanbans) for a Multiline, Multistage Production System,” Decision Sciences,
Vol. 14, No. 3 (July, 1983), pp. 326-344
Reprinted in: Yasuhiro Monden (editor), Applying Just-in-Time: The
American/Japanese Experience. Norcross, Georgia: Industrial Engineering and
Management Press, 1986, pp. 128-146.)
Huang, P. Y. and P. Ghandforoush, “Simulation Language Selection and Evaluation Model,”
Journal of Systems Management, Vol. 34, No. 4 (April 1983), pp. 10-15.
Huang, P. Y., E. R. Clayton, and L. J. Moore, “Analysis of Material and Capacity Requirements
with Q-GERT,” International Journal of Production Research, Vol. 20, No. 6
(November/December, 1982), pp. 701-713.
Journal Articles (not refereed):
Huang, P. Y., “The Impact of Quality Revolution on POM Education,” Communications of the
ICISA, Spring 1995, pp.4-7.
Huang, P. Y., “Factory Automation: What Can We Learn From Japan?” Managing Automation,
Vol. 5, No. 3 (March 1990), pp. 6-7.
Huang, P. Y., “Japanese Toyota Management,” Postal Research Quarterly (in Chinese), No. 21
(June 1986), pp. 6-16.
Huang, P. Y. and P. Ghandforoush, “Industrial Robot Selection,” Industrial Engineering, Vol.
16, No. 4 (April 1984), pp. 44-48.
Reprinted in: Edward L. Fisher and Oded Z. Maimon (editors), Robotics and Industrial
Engineering: Selected Readings, Vol. II. Norcross, Georgia: Industrial Engineering and
Management Press, 1986, pp. 41-44.
Papers Presented at Professional Meetings and Published in Proceedings:
Huang, P. Y., “A Quality Function Deployment Model For Supplier Quality Management,”
Proceedings of the 2006 Annual Conference of the International Academy of Business and
Economics, Vol. II, No. 1, pp 229-232.
Huang, P. Y., “A Simulation Study of the Control Chart for Coefficient of Variation,”
Proceedings of the 2005 Annual Conference of the International Academy of Business and
Economics, Vol. 1, No. 1, pp. 1-4.
Huang, P. Y. and Wendy Vogt, “Performance Metrics for Supply Chain Management: an
Overview,” Proceedings of the 2003 Annual Southeast Decision Sciences Institute, pp.301-
303.
Huang, P. Y., “Managing Supplier Quality with an Integrated Analytical Hierarchy Process,”
Online Proceedings of the 2002 Annual International Conference of the Production and
Operations Management Society,
http://www.poms.org/2002/cd/Papers/PurchasingMaterialsMgmt/Philip_Huang_PMM.pdf
Huang, P. Y. and Steven Markham, “A Monitoring Application: Using Charts for Comparing the
Dispersion of Heterogeneous Performance Measures,” Online Proceedings of the 2002 Annual
International Conference of the Production and Operations Management Society,
http://www.poms.org/2002/cd/opening.pdf, p.133.
Huang, P. Y. and Michael Breuer, “SIMT: A German Model for International Graduate Business
Programs,” Proceedings of the 2001 Annual Southeast Decision Sciences Institute, p.282.
Huang, P. Y., “Managing a Global Supply Chain,” Proceedings of the 1999 Annual
International Conference of the American Production and Inventory Control Society, pp.158-
159.
Silva , João Paulo, João Lisboa, and P. Y. Huang, “A Labor Constrained Model for
Aggregate Production Planning,” 1999 Proceedings of the Quest for Global
Competitiveness Forum, pp.59-63.
Huang, P. Y., “An Educational and Professional Consortium to Train International Operations
Managers,” 1998 Proceedings of the 41st Annual International Conference of the American
Production and Inventory Control Society, pp. 333-334.
Shi, Jenny J., and P. Y. Huang, “The Impact of Asian Financial Crisis on Global Operations and
Banking,” 1998 Proceedings of the Annual Conference of the American Chinese Management
Educators’ Association, pp. 102-105.
Huang, P. Y., R. J. Mcllwain, and L. J. Moore, “A Comparative Study of Cellular Layout versus
Functional Layout Using Robust Design,” 1995 Proceedings of the Annual Conference of the
Northeast Decision Sciences Institute, pp. 416-418.
Huang, P. Y., “A Survey of ISO 9000 Registration in Taiwan,” 1995 Proceedings of the Pan-
Pacific Conference XII: A Business, Economics, & Technology Exchange, pp. 416-418.
Huang, P. Y. and J. Shi, “The Implementation of Total Quality Management in China,” 1994
Proceedings of the Annual Conference of the American Chinese Management Educators’
Association, pp. 310-324.
Huang, P. Y., “The Impact of Quality Revolution on Management Education,” 1993 Proceedings
of the Annual Conference on Management Education in Taiwan.
Russell, R. S., P. Y. Huang, and Y. Leu, “On the Applicability of Cellular Manufacturing,” 1993
Proceedings of Decision Sciences Institute, Vol. 3, pp. 1469-1471.
Russell, R. S., P. Y. Huang and Y. Leu, “An Investigation of the Flexibility of a Functional
Layout versus a U-Shaped Cellular Layout,” 1990 Proceedings of Decision Sciences Institute,
Vol. 2, pp. 1748-1750.
Huang, P. Y., “Current Status of Factory Automation in the United States and Japan,”
Proceedings of the Seminar on Automation and Computerization of the Manufacturing
Industry, Kaohsiung, Taiwan, July 20, 1990.
Huang, P. Y., “The Building Blocks of a World Class Manufacturing Systems in the 1990s: JIT,
TQC, FA, and TPM,” Proceedings of the 1990 Chinese American Academic & Professional
Convention, New York, NY, July 3-6, 1990.
Huang, P. Y., “Viewing JIT Production from the Stand Point of Information Requirements,”
1989 Proceedings of International Seminar on Management and Information, (in Chinese),
Taipei, Taiwan, pp. 7:1-7:16.
Reprinted in: Journal of Industry and Commerce. Taipei, Taiwan, July 29, 1989, p. 23.
Huang, P. Y. and M. Sakurai, “A General Mail Survey of Factory Automation in Japan,” 1989
Proceedings of Decision Sciences Institute, Vol. 1, pp. 158-160.
Huang, P. Y. and M. Sakurai, “Factory Automation: The Japanese Experience,” 1988
Proceedings of the 31st Annual International Conference of the American Production and
Inventory Control Society, pp. 408-409.
Russell, R. S., P. Y. Huang, and Y. Leu, “A Study of Labor Allocation in Cellular
Manufacturing,” 1987 Proceedings of Decision Sciences Institute, Vol. 2, pp. 796-798.
Huang, P. Y. and M. Sakurai, “A Study on Factory Automation in Japanese Industries,” 1987
Proceedings of Decision Sciences Institute, Vol. 2, p. 824.
Huang, P. Y., Y. Leu, T. R. Rakes, L. P. Rees, and R. S. Russell, “Integration of Expert System
in Simulation in Analyzing a JIT-GT Shop: A Preliminary Study,” 1987 Proceedings of the
Southeastern Chapter of the Institute of Management Sciences, p. 366.
Huang, P. Y., “The Key to the Lead Time Control: JIT and GT,” Readings in Zero Inventory,
1984 Proceedings of the American Production and Inventory Control Society, pp. 72-74.
Huang, P. Y., “Analysis of the Necessary Conditions for Implementing JIT Production,” Zero
Inventory Philosophy & Practices Seminar Proceedings, (October 1984), pp. 24-29.
Huang, P. Y., P. R. Philipoom, L. P. Rees, and B. W. Taylor, “Server and Queue Discipline
Rules for the Just-in-Time with Kanban Systems in a Non-Assembly Line Environment,” 1984
Proceedings of Decision Sciences Institute, (microfiche).
Huang, P. Y., P. Ghandforoush, and K. C. South, “Industrial Robot Selection: A Multifactor
Decision Model,” 1984 Proceedings of Decision Sciences Institute, (microfiche).
Frendewey, J., P. Y. Huang, and R. S. Russell, “An Extension to Capacity Constrained MRP
Systems,” 1984 Proceedings of the Southeastern Chapter of the Institute of Management
Sciences, p. 28.
Huang, P. Y., “A Q-GERT Network Simulation Model for a Voice-Data Communication
System,” 1983 Proceedings of the Winter Simulation Conference, pp. 212-216.
Huang, P. Y. and P. Ghandforoush, “A Multi-Criteria Model for R&D Project Selection,” 1983
Proceedings of Decision Sciences Institute, (microfiche).
Huang, P. Y., P. R. Philipoom, and L. P. Rees, “Some Sequencing Rules in a Just-in-Time
System with Kanbans,” 1983 Proceedings of the Southeastern Chapter of the Institute of
Management Sciences, pp. 286-291.
Huang, P. Y. and P. Ghandforoush, “Industrial Robot Selection,” 1983 Proceedings of the
Southeastern Chapter of the Institute of Management Sciences, pp. 698-705.
Huang, P. Y., L. P. Rees, and B. W. Taylor, “Simulating the Japanese Kanban Technique in An
American Production Environment,” 1982 Proceedings of Decision Sciences Institute, Vol. 2,
pp. 113-114.
Huang, P. Y., “A Comparative Study of Priority Dispatching Rules in a Hybrid Assembly/Job
Shop,” 1982 Proceedings of Decision Sciences Institute, Vol. 2, p. 403.
Huang, P. Y. and P. Ghandforoush, “An Integrated Procedure for the Evaluation and Selection of
Simulation Languages,” 1982 Proceedings of the 18th
Annual Meeting of the Southeastern
Chapter of the Institute of Management Sciences, pp. 209-213.
Huang, P. Y., E. Torrence, and W. R. Long, “A Simulation Model for a Multiple-Component Job
Shop System Using Actual Operating Data,” 1982 Proceedings of the Annual Meeting of the
Southeast Decision Sciences Institute, pp. 17-18.
Huang, P. Y. and R. S. Russell, “The Effect of Heterogeneous Labor on Scheduling Decisions in
a Dual-Resource Constrained Job Shop,” 1981 Proceedings of the 17th
Annual Meeting of the
Southeastern Chapter of the Institute of Management Sciences, pp. 121-127.
Huang, P. Y., E. R. Clayton, and L. J. Moore, “Analysis of a Multi-Resource Constrained Job
Shop with Q-GERT,” 1981 Proceedings of Decision Sciences Institute, Vol. 2, p. 407.
Huang, P. Y., L. J. Moore, and R. S. Russell, “The Impact of Workload on Scheduling Policies,”
1981 Proceedings of the 41st Annual Meeting of the Academy of Management, p. 444.
Clayton, E. R., P. Y. Huang, and L. J. Moore, “Q-GERT Modeling and Simulation:
Fundamentals and Applications,” 1981 Proceedings of the Annual Meeting of the Southeast
Decision Sciences Institute, pp. 106-107.
Huang, P. Y., E. R. Clayton, and L. J. Moore, “Analysis of Material and Capacity Requirements
with Q-GERT,” 1981 Proceedings of the Annual Meeting of the Southeast Decision Sciences
Institute, pp. 183-184.
Huang, P. Y. and E. R. Clayton, “A Q-GERT Network Simulation Model for the Selection of Job
Shop Scheduling Rules,” 1980 Proceedings of the 16th
Annual Meeting of the Southeastern
Chapter of the Institute of Management Sciences, pp. 8-10.
Huang, P. Y., “On the Robustness of the Linear Discriminant Function to Certain Types of
Measurement Errors,” 1979 Proceedings of the 15th
Annual Meeting of the Southeastern
Chapter of the Institute of Management Sciences, pp. 345-350.
Hsu, Y., J. C. Hsiao, and P. Y. Huang, “On the Determinants of Consumer Preferences for Meat
Products,” 1979 Proceedings of Decision Sciences Institute, Vol. 2, p. 293.
Huang, P. Y. and J. C. Hayya, “A Comparison between Discriminant Analysis and Discrete
Regression: the O-1 Case,” 1978 Proceedings of Decision Sciences Institute, Vol. 2, p. 246.
Huang, P. Y. and J. C. Hayya, “On the Discriminant Analysis and Discrete Regression,” 1978
Proceedings of the Business and Economic Statistics Section, American Statistical Association,
pp. 625-630.
Book Reviews:
Huang, P. Y., “Toyota Production System,” Journal of Japanese Trade and Industry, Vol. 26,
No. 4, May/June, 1988, pp. 55-56.
Huang, P. Y., “Toyota Production System,” Decision Line, Vol. 15, No. 3, May 1984, p. 4.
Reprinted in APICS Hotline, Vol. 7, August 1984, p. 3.
Media Presentations:
“U.S.-China Relations” Featured Speaker on “Focus on Greater China”
TV program aired on WTOB, Channel 2, Blacksburg, VA on
March 15, 1999.
“MBA Education” Featured Speaker on “MBA Education in the United States” a live
talk show aired on March 10, 1998 on Voice of America.
“Public Relations” Featured Speaker on “Public Relations in American Business
Organization” a live talk show aired on February 17, 1997 on
Voice of America.
“Continuous Improvement” Featured Speaker on “Virginia Tech Perspectives: Quality
Leadership and Management” a National Live/Interactive
Teleconference Series
A satellite program aired on December 4, 1991 on NTU Satellite
Network
“The Flexible Factory” Featured expert on “Just-in-Time” television production
TV program aired Fall 1987, Spring 1988, and Winter 1991 on
educational and cable television in Virginia and West Virginia:
WSWP, Channel 9, Beckley, WV
MNVC, Channel 56, Fairfax, VA
WBRA, Channel 15, Roanoke, VA
WCVE, Channel 23, Richmond, VA
WHRO, Channel 15, Norfolk, VA
“Robotics Seminar” Featured expert panelist on “Robotics and Business”
TV news aired on WDBJ, Channel 7, Roanoke, VA on January 9,
1984. Subsequent interviews appeared in:
News Messenger, January 19, 1984
Research: Virginia Tech, 1984, p. 8
Spectrum, January 19, 1984
The Student’s Voice, March 7, 1984
GUEST/INVITED LECTURES
“Global Supply Chain Management and Information Technology: a Portuguese Survey,” guest
speaker at the Meeting of the Virginia Tech Student Chapter of the Institute for Operations
Research and Management Science, Blacksburg, Virginia, September 17, 2003.
“Strategy and Quality,” guest speaker at the Universidade de Beira Interior, Covilhã, Portugal,
July 4, 2003
“Strategy and Quality,” guest speaker at the Faculdade de Economia, Universidade de Coimbra,
Coimbra, Portugal, June 5, 2003
“Continuous Process Improvement,” guest lecturer at American Electric Power Company’s
Training Programs, Blacksburg, Virginia, July 22-27, 2002; January 20, 27; February 3, 17, 24;
and March 3, 17, 1999.
“U.S.-China Relations,” keynote speaker at the annual induction ceremony of the Gamma
Omega Chapter of Phi Beta Delta, the International Honor Society, Blacksburg, Virginia,
February 10, 1999.
“Process Quality Management and Improvement,” guest lecturer at AT&T’s Consumer Process
Operations Center, Basking Ridge, New Jersey, January 11-13, 1999.
“President Clinton’s Trip to China: A Personal View,” guest speaker at the Rotary Club,
Christiansburg, Virginia, July 13, 1998.
“Supply Chain Management,” guest lecturer at Virginia Manufacturing Association’s
Leadership in Changing Times Training Program, Blacksburg, Virginia, May 6, 1998.
“Policy Deployment,” guest lecturer at Virginia Manufacturing Association’s Leadership in
Changing Times Training Program, Blacksburg, Virginia, May 7, 1998.
Guest Lecturer- Virginia Forum for Excellence, April 29, 1998, Richmond
“Management of Quality and Productivity Issues,” guest lecturer- Virginia Tech’s Introduction
to the MBA, April 16, 1997, October 22, 1997, April 23, 1998, and October 15, 1998, Northern
Virginia
“Management of Quality and Productivity Issues,” guest lecturer- Virginia Tech’s Introduction
to the MBA, October 21, 1997 and October 14, 1998, Richmond
“Integrating a Global Perspective into the Business Curriculum,” invited panelist at the Annual
Meeting of the Southeast INFORMS, Myrtle Beach, South Carolina, October 2-3, 1997.
“The Quality Factors in Purchaser-Supplier Relationships,” invited panelist at a joint meeting of
New River Valley Quality Council and the National Association of Purchasing Managers,
Blacksburg, Virginia, February 18, 1997.
“Total Quality Management,” guest lecturer at the Transportation Construction Management
Institute, Blacksburg, Virginia, February 7, 1997.
“Voice of the Customer,” guest lecturer at AT&T School of Business, Somerset, New Jersey,
November 4-5, 1996.
“Voice of the Customer,” guest lecturer at AT&T School of Business, Somerset, New Jersey,
April 18-19, 1996.
“Managing Policy Deployment,” guest lecturer at AT&T School of Business, Somerset, New
Jersey, March 7-8, 1996.
“Supplier Quality Management,” guest lecturer at AT&T School of Business, Somerset, New
Jersey, February 28-29, 1996.
“Total Quality Management,” guest lecturer at the Transportation Construction Management
Institute, Blacksburg, Virginia, February 26, 1996.
“Supplier Quality Management,” guest lecturer at AT&T School of Business, Somerset, New
Jersey, December 20-21, 1995.
“Managing Policy Deployment,” guest lecturer at AT&T School of Business, Somerset, New
Jersey, December 18-19, 1995.
“Total Quality Management,” guest lecturer the Virginia Department of Transportation Spring
Leadership Program, Blacksburg, Virginia, March 2, 1995.
“Continuous Improvement,” guest lecturer at the ACEM Executive Development Program,
Blacksburg, Virginia, March 4, 1994.
“Continuous Improvement,” guest lecturer at the Virginia Department of Transportation Spring
Leadership Program, Blacksburg, Virginia, February 16, 1994.
“Continuous Improvement: the Foundation of Total Quality Management,” keynote speaker at
the 1993 Annual Quality Circle Meeting of Taiwan Sugar, Inc., Tainan, Taiwan, July 23, 1993.
“Continuous Improvement: the Foundation of Total Quality Management,” invited speaker at
the Seminar on Total Quality Management, sponsored by the Office for International Exchange
of Personnel, Shengyang Municipal Government, Shengyang, China, June 30-July 1, 1992.
“The Implementation of Total Quality Management in Large American Companies,” invited
speaker at the Capital Steel Corporation, Beijing, china, June 25-26, 1992.
“Toyota Production Management,” invited speaker at the Seminar on Modern Management,
sponsored by Nanjing Space Management Institute for Executives Ministry of Aerospace
Industry, Nanjing, China, July 22-23, 1992.
“The Implementation of Total Quality Management in Large American Companies,” invited
speaker at the Baoshan Steel Works, Shanghai, China, June 15, 1992.
“Continuous Improvement: the Foundation of Total Quality Management,” invited speaker at
the Quality and Management Seminar, jointly sponsored by Shanghai Industrial Management
Training Centre and Shanghai Association for International Culture Exchanges, Shanghai, China,
June 11-12, 1992.
“Seven Tools for Total Quality Management,” guest lecturer at Roanoke Times and World-
News, Inc., February 7 & 28, 1992.
“Japanese Management,” invited speaker at the International Club at Cranwell International
Center, Virginia Tech, Blacksburg, Virginia, October 11, 1991.
“Total Quality Management,” invited speaker at the 1991 Annual Spring Meeting, Blue Ridge
Association of Chiefs of Police, Peaks of Otter, Virginia, May 1991.
“Continuous Improvement: the Foundation of Corporate Culture,” invited speaker at the
Advanced International Seminar for Chinese Enterprise Groups. Jointly sponsored by the United
Nations Development Programmes, China International Centre for Economic and Technical
Exchanges, and China Society for Overseas Human Resource Studies, Beijing, China, March 11-
20, 1991.
“Total Quality Management,” invited speaker at the Quality and Management Seminar, jointly
sponsored by Shanghai Industrial Management Training Center and Shanghai Association for
International Culture Exchanges, Shanghai, China, March 21-24, 1991.
“Continuous Improvement,” invited speaker at the Seminar on the Strategic Management of
Quality, sponsored by Management Development Center, The R. B. Pamplin College of Business,
Virginia Polytechnic Institute and State University, Blacksburg, VA, October 1-3, 1990.
“World Class Manufacturing Systems in the 1990s,” invited speaker at the International
Conference on Modern Production Concepts: Theory and Applications, Hagen, Germany, August
20-24, 1990.
“World Class Manufacturing Systems in the 1990s,” invited speaker at the UNDP Lecture Series
(TOKTEN) in Shanghai and Beijing, China, August, 1990.
“Current Status of Factory Automation in the United States and Japan,” invited speaker at the
Seminar on Automation and Computerization of the Manufacturing Industry, Kaohsiung, Taiwan,
July 20, 1990.
“Just-in-Time Production,” guest lecturer at the 1990 APICS Certification Exam Preparation
Workshop, the Southwestern Virginia Chapter of the American Production and Inventory
Control Society, Blacksburg, Virginia, February - March, 1990.
“Manufacturing Systems for the 1990s,” invited panelist at the 1989 Annual International
Conference of the American Production and Inventory Control Society, Orlando, Florida,
October 23-27, 1989.
“A Multi-Project, Multi-Criteria Evaluation and Selection Model for R&D Management,”
invited speaker at the Electro-Optical Products Division of ITT Defense, Roanoke, Virginia,
November 2, 1989.
“Western and Japanese Modern Production Management Systems,” invited speaker at the UNDP
Lecture Series (TOKTEN) in Shanghai and Zhejiang Province (including Hangzhou, Huzhou,
Ningbo, and Shoaxing), China, August, 1989.
“Viewing JIT Production from the Stand Point of Information Requirements,” invited speaker at
the International Seminar on Management and Information, Taipei, Taiwan, July 27-29, 1989.
“Factory Automation in Japan,” invited speaker at the Engineering Colloquium of the Electro-
Optical Products Division of ITT Defense, Roanoke, Virginia, March 20, 1989.
“A Comparison of the Current Production Management Systems: The U.S. vs. Japan,” invited
speaker at the UNDP Lecture Series (TOKTEN) in Changsha, Hengyang, and Huaihua of the
Hunan Province, People’s Republic of China, August, 1988.
“Factory Automation in Japan,” invited speaker at the Meeting of the Southwestern Virginia
Chapter of the American Production and Inventory Control Society, February 1988.
“The Current Status of Factory Automation in Japanese Industries,” invited speaker at Asian
University, Tokyo, Japan, October 1987.
“The Implementation of Factory Automation in Japanese Industries,” invited speaker at Senshu
University, Tokyo, Japan, October 1987.
“Factory Automation in Japanese Industries,” invited speaker at CSK Corporation, Tokyo, Japan,
September 12, 1987.
“Toyota Production System - the Translated Chinese Version,” invited speaker at the seminar on
Toyota production system, jointly sponsored by China Productivity Center and Economic Daily,
Taipei, Taiwan, August 26, 1987.
“Manufacturing Resources Planning and Just-in-Time Production,” invited speaker at the
seminar jointly sponsored by the Bureau of Industry in Henan Province and Huanghe University,
Zhengzhou, Henan, People’s Republic of China, August, 1986.
“Toyota Production Management,” invited speaker at Zhengzhou Coal Mining Management
College, Zhengzhou, Henan, People’s Republic of China, July 1986.
“Just-in-Time Production and Kanban Control,” invited speaker at Beijing Coal Mining
Management College, Beijing, People’s Republic of China, July 1986.
“Manufacturing Resources Planning and Toyota Production Management,” invited speaker at
the Productivity and Information Seminar, jointly sponsored by National Science Council, the
Mechanical Industry Research Laboratories of the Industrial Technology Research Institute,
China Productivity Center, and the National Chao Tung University, Hsin Chu, Taiwan, July,
1986.
“Toyota Production Management: JIT/Kanban,” invited speaker at China Steel Corporation,
Kaohsiung, Taiwan, March 1986.
“The Development and Applications of Material Requirements Planning,” invited speaker at the
December Meeting of the Chinese Institute of Industrial Engineers, jointly sponsored by China
Productivity Center, Taipei, Taiwan, December, 1985.
“Computer Integrated Manufacturing Systems,” invited speaker at the Mechanical Industry
Research Laboratories of the Industrial Technology Research Institute, Hsin Chu, Taiwan,
November, 1985.
“JIT/Kanban Production and Its Implementation Conditions,” invited speaker at the Faculty
Meeting of the Graduate Institute of Business Administration, National Taiwan University,
Taipei, Taiwan, November 1985.
“JIT/Kanban Production and Its Implementation Conditions,” invited speaker at the Graduate
Institute of Industrial Engineers, National Tsing Hua University, Hsin Chu, Taiwan, October
1985.
“The Key to the Lead Time Control: JIT + GT,” invited speaker at the 1985 Atlantic Coast
Symposium.
“Japanese Production Management Concepts: Are They Applicable in the U.S.?” invited speaker
at the Brush Mountain Colloquy, sponsored by the Center for Public Administration and Policy,
Virginia Polytechnic Institute and State University, February, 1984.
“Just-in-Time: A Japanese Approach to Inventory Management,” invited speaker at the Blue
Ridge Chapter Meeting of the American Production and Inventory Control Society, December,
1982.”
“Just-in-Time with Kanban,” invited speaker at the Meeting of the Southwestern Virginia
Chapter of the American Production and Inventory Control Society, September 1982.
“Japanese Production Management System: Just-in-Time and KANBAN,” invited speaker at the
Personnel Association of Roanoke Chapter of the American Society for Personnel
Administration, August 1982.
