RESUME - Coimbatore Institute of Technology...1 RESUME Name : Dr. V. SELLADURAI M.E, Ph.D. Date of Birth : 16.05.1958 Professor V.Selladurai, Principal, CIT, obtained his Ph.D. in

1

RESUME

Name : Dr. V. SELLADURAI M.E, Ph.D.

Date of Birth : 16.05.1958 Professor V.Selladurai, Principal, CIT, obtained his Ph.D. in Mechanical Engineering 1994 from

Bharathiar University (PSG Tech), Master‟s Degree in Mechanical Engineering (Industrial Engineering

Specialization) 1982 from Madras University (PSG Tech), Bachelor‟s Degree in Production Engineering

1980 from Madras University (PSG Tech).

Following his academic qualification, he holds 2 years of work experience as a Systems / Industrial

Engineer. Holding a strong academic and industrial exposure, Professor Selladurai moved to

academics, where he holds 27 years of teaching, research and administrative experience working

at different levels in CIT. He holds his specializations in Manufacturing Systems Engineering,

Optimization Techniques, Industrial and Production Engineering.

Working as an academician, Professor Selladurai has contributed vividly both to industry and

academia. His contribution includes 210 national journals, international journals and conference level

publications; this is with providing individual guidance to more than 30 Ph.D. research scholars. He had

chaired, organized and conducted numerous workshops, seminars and conferences.

His developmental work includes obtaining grant from funding bodies alike; AICTE, UGC and DST

research projects and delivered new laboratories in different disciplines. He is currently the Principal of

Coimbatore Institute of Technology & CIT Sandwich Polytechnic College, Chairman, INDIAN

WELDING SOCIETY, Coimbatore Local Center.

Areas of Expertise

Manufacturing Systems Engineering

Industrial Engineering

Production Engineering

Operations Research

2

ACADEMIC QUALIFICATIONS Ph.D.: (Bharathiar University, PSG College of Technology, Coimbatore)

Completed in October 1994 in Mechanical Engineering with the specialization of

Manufacturing Systems Engineering

Thesis title : Dynamic Analysis of Manufacturing Systems for Optimal Performance

M.E.: (Madras University, PSG College of Technology, Coimbatore)

Completed in 1982 in Mechanical Engineering – (Industrial Engineering)

Scored First Class

B.E.: (Madras University, PSG College of Technology, Coimbatore )

Completed in 1980 in Production Engineering

Scored First Class

INDUSTRIAL EXPERIENCE

Address for Communication

Office:

Principal, Professor and Head,

Department of Mechanical Engineering,

Coimbatore Institute of Technology,

Coimbatore - 641 014, INDIA.

Ph. 0422- 2573187, 2574071, 2574072

Email: [email protected],

[email protected]

Mobile:( 0) 9363227757

Residence:

9/11, Sree Velmurugan Nivas

Palanisamy Naidu Layout, Street I

Nehru Nagar East

SITRA Kalapatti Road

Coimbatore - 641 014, INDIA.

Ph. 0422-4365252

Mobile:(0) 9363227757

S.No. Industry Position Peri

od

1 M/s. Shanthi Gears Ltd.,

Coimbatore

Marketing and

Systems Engineer

07.07.1982 to

10.08.1983

2 M/s. Associated Management

Consultants, Salem – at M/s Sakthi

Sugars Ltd.

Consultant

12.08.1983 to

20.11.1983

3 Salem Productivity Council

Salem

Junior Industrial

Engineer

20.11.1983 to

09.01.1984

4 M/s. Besantraj Consultants

Madras – at Sundaram Fasteners Ltd. Consultant

18.01.1984 to

31.07.1984

mailto:[email protected]

mailto:[email protected]

3

ACADEMIC EXPERIENCE

S.No. Institution Position Period

1 Coimbatore Institute of Technology

Coimbatore - 641 014.

Lecturer in Mechanical

Engineering

01.08.1984 to

13.06.1996



Assistant Professor in

Mechanical Engineering

14.06.1996 to

24.09.2001



Professor in Mechanical

Engineering

25.09.2001 to

30.11.2006



Professor and HOD,

Department of Mechanical

Engineering

01.12.2006

onwards.


Coimbatore - 641 014. Vice-Principal

24.10.2008 to

31.05.2009

6

Coimbatore Institute of Technology and

CIT Sandwich Polytechnic College


Principal I/C

01.06.2009 to

08.06.2009.

7

Coimbatore Institute of Technology

and CIT Sandwich Polytechnic

College


Principal

09.06.2009

onwards.

RESEARCH EXPERIENCE


1 PSG College of Technology


QIP - Ph.D. Research

Scholar

02.07.1990 to

01.07.1993

2 Guiding Ph.D. Research Scholars from 1995 February onwards under

Bharathiar University and ANNA University.

ADMINISTRATIVE & ADVISORY EXPERIENCE


1 PSG College of Technology

Coimbatore - 641 004. QIP-Ph.D Research Scholar

02.07.1990 to

01.07.1993



Assistant Controller of

Examinations, Autonomous

System

02.01.1996 to

01.08.1997

4


Coimbatore - 641 014. Workshop Superintendent 01.06.1998 onwards


Coimbatore - 641 014. Additional Placement Officer

02.06.2003 to

31.07.2004

No. of Jobs. :250


Coimbatore - 641 014. Placement Officer

01.08.2004 onwards

No. of Jobs obtained:

(2004-05) - 340

(2005-06) - 532

(2006-07) - 516

(2007-08) - 642

6 Institution of Engineers (India)

Coimbatore Local Centre Honorary Secretary

October 2004 to

October 2006

7 Anna University Coimbatore Chairman, Faculty of

Automation and Robotics

March 2007 to

May 2010


Coimbatore Local Centre Chairman

October 2008 to

October 2010.

9

Institution of Engineers (India)

Production Engineering Division

Board

Division Board Member 2008 – 2010


Kolkata (HQ)

National Council Member 2008 – 2010

Regional Co-ordination

Committee Member 2008 – 2010

Member Examination,

Evaluation, Accreditation

Council

2008 - 2010

11 Indian Welding Society

Coimbatore Chapter Chairman

October 2011 to

October 2013

CONTRIBUTIONS TO ACADEMIA

Member, affiliating committees of Anna University Chennai (2004 – 06).

Doctoral committee member for PhD scholars of Anna University Chennai, Anna University

Coimbatore.

Chairman and Member of Affiliating Committees of Anna University Coimbatore (2007-08,

2008-09, 2009-10).

Member, Board of Research, Anna University Coimbatore, May 2007 onwards.

Member, Result Passing Board, Anna University Coimbatore, November 2007, May 2009.

5

Member, Academic Council, KSR College of Technology, Thirugengodu (2008-09, 2009-10).

Member, Result Passing Board, KSR College of Technology, Thirugengodu (2008-10).

Governing Council Member (2009 -2011 Anna University Coimbatore Nominee) Kalaingnar

Karunanidhi Institute of Technology, KTVR Knowledge Park College of Engineering and

Technology, KSR Institute of Technology.

Member Governing Council (2009-2011) Nachimuthu Polytechnic,Pollachi.

Member, Board of Studies (Autonomous Colleges 2008-09, 2009-10).

- Mechanical Engineering, Kongu Engineering College, Erode.

- Mechanical Engineering, Sri Ramakrishna Engineering College, Coimbatore

- Mechatronics Engineering, Kumaraguru College of Technology, Coimbatore

- Mechatronics Engineering, KSR College of Technology, Thirugengodu.

Member, AICTE and DOTE Approval Committee for Engineering and Technology Institutions.

ADMINISTRATION / CO-ORDINATION WORK UNDERGONE AT CIT

Assisting the Management and the Principal.

AICTE /DST/UGC Research and Modernization Project Proposals preparation and

implementation.

NBA Accreditation (January 2005 and December 2008) activities.

University Affiliation Activities.

Handling a unique subject “Science of Creativity and Personality Development” since

1987 onwards.

Chairman Board of Studies – Mechanical Engineering, December 2006 onwards.

Member in Academic Council, Planning and Evaluation Committee, Research Board,

Curriculum Development Cell, Library Committee, Disciplinary Committee, Finance

Committee, Standing Committee and Result Passing Board.

MoUs SIGNED

1. Loughborough University, UK.

Department of Mechanical and Manufacturing Engineering – July 2000 for PhD/ PDF/

Short term Courses and Exchange of Faculty.

2. Defense Research Development Laboratory, Hyderabad, India.

CFD Group – August 2001, M.E./M.Tech. Projects, Consultancy and Training

Programmes

3. University of Massachusetts, Dartmouth, USA.

February 2003 – Conferences, Exchange of Faculty and Faculty Training and faculty

visits.

6

4. Tata Consultancy Services, Chennai.

July 2006 - Faculty Development Programme, Workshop, Students Technical Activities

and Training.

5. Robert Bosch India Limited, Bangalore.

June 2007 - Faculty Development Programme, Workshop, Students Technical

Activities and Training and setting-up of Bosch Corner.

6. National Informatics Center, Government of India.

November 2007- National Informatics Centre (NIC), Department of information

Technology, Ministry of Communication & Information Technology, Research and

Training Programme for faculty, students and practicing engineers in CollabCAD.

7. FLSmidth Private Limited, Chennai.

June 2008 - FLSmidth Private Limited, Chennai - Faculty Development Programme,

Workshop, Students Technical Activities and Training.

8. USA(June 2009)

Oklahoma State University, Stillwater – MoU signed for Education and

Research

Texas Tech University, Lubbock –MoU signed for Education and Research

9. IBM

September 2009 - Establishment of Center of Research and Technology Excellence

(RTE), Introduction of a post graduate programme, curriculum jointly developed by IBM

and CIT, Faculty and students development programmes.

10. CPRI, Bangalore, Ministry of Power, Government of India, CDAC,

Thiruvananthapuram, A Scientific Society of the Ministry of Communications and

Information Technology, Government of India, and Tamil Nadu Electricity Board

– February 2010 “ Development of Dynamic Voltage Restorer”.

11. Novel India Pvt. Ltd, Bangalore.

April 2010 – Academic Training and Partner Mentoring Programme.

12. Bergen University College, Faculty of Engineering (HiB) Bergen, Norway, January

2011- Education and Research Collaboration.

13. AMD (USA), Bangalore, March 2011- Strategic initiatives to enable the next

generation of software developers.

14. CENTRO DE INVESTIGATION Y DE ESTUDIOS AVANZADOS DEL IPN

(CINVESTOV), MEXICO – July 2011, Scientific Technological and Academic

Collaboration.

15. SAMSUNG Mobile Innovator CIT Program Agreement October 2011- Mobile

Communication, Education and Research Initiatives.

7

PLACES of VISIT

1. USA (April / May 2005)

- Massachusetts institute of Technology

- University of Massachusetts, Dartmouth

- Boston University

- Harvard University

- Connecticut State University

2. UK (May 2005)

- Loughborough University

- Nottingham University

- University of Sheffield

- Birmingham University

- East London University

- Imperial College

3. USA (April/May 2008)

- UMASSD, Dartmouth

Presented the research article entitled, “Supplier Selection through Analytical

Hierarchy Program and Fuzzy Set Theory”, on 28 April 2008, at CCB-BIRC.

Participated in the Executive on Campus event, led by the CEO of Bed, Bath and

Beyond, Mr.Eisenburg, a $7.5 billion dollar company on 30 April 2008.

- Wichita State University

Presented the research article entitled, “Flexible Parallel Machine Scheduling”, at

Industrial and Manufacturing Engineering Department on 22 May 2008.

- University of Michigan, Ann Arbor.

4. Dubai (August –September 2008)

- Visit to Academic Village

5. USA (September 2008)

- UMASSD, Dartmouth

- Wichita State University, KS.

6. Thailand (November 2008)

- Naresuan University, Phitsanulok

Presented a Technical paper, “Information Technologies for Knowledge

Management: Their Usage and Effectiveness”. Asian Institute of Technology

Visited the School of Engineering and Technology and School of Environment,

Resources and Development for possible partnership in Research and

Development Programs.

8

7. USA(June 2009)

- Oklahoma State University, Stillwater – MoU signed for Education and

Research

- Texas Tech University, Lubbock –MoU signed for Education and Research

8. USA(May 2012)

- Stanford University

- Massachusetts Institute of Technology

- Oklahoma State University

- University of Massachusetts (Dartmouth)

POST GRADUATE PROGRAMME INSTITUTED

M.E. in Advanced Manufacturing Technology from July 2005 onwards.

M.E. in Communication Engineering from July 2010 onwards.

M.E. in Construction Management from July 2011 onwards

M.E. in Computer Science and Engineering from July 2012 onwards

UNDERGRADUATE PROGRAMME ENHANCED

B.E. Mechanical Engineering (Additional Section) from 2009-2010 onwards.

LABORATORIES DEVELOPED

1. Augmentation of Basic Workshops (2001)

Carpentry

Fitting

Sheet Metal and Plumbing

Electrical Wiring and Home Appliances Laboratory

2. Augmentation of Lathe and Special Machines Section -2005.

3. Establishment of CAD/CAM/CIM Laboratories (August 1997).

4. Establishment of Advanced Metrology and Machining Laboratory (June 2005, 2008).

RESEARCH PROJECTS RECEIVED AND IMPLEMENTED

Academic

Year TITLE OF THE PROJECT

Amount Received

in Lakhs

1994-95 MODROB – Modernization of Manufacturing Systems Lab 5.00

1995-96 TAPTEC – Computer integrated Manufacturing 6.00

1995-96 OFFICE AUTOMATION for COE office 6.00

1996-97 R&D - Development of Neural Based FMS Simulator 7.00

1996-97 TECHNOLOGY FORECASTING - Development of Dynamic

Intelligent Manufacturing System Simulator 3.00

9

1999-2000 R&D - Development of job-shop scheduler through parallel

processing and hybrid modeling for optimal performance 4.00

2002-2003 FIST Programme of DST, Manufacturing System Simulator 15.00

2003-2004 AICTE - RPS- Analysis of cutting tool flank wear using force

ratio and evolutionary techniques to improve surface finish 10.50

2008-2009 AICTE- MODROB Modernization of Mechanical Engineering

Laboratories 15.00

2011-12 AICTE-MODROB Modernization of Heat Transfer Laboratory 14.80

2011-12 FIST Programme of DST, Level I Basic Research and

Teaching 70.00

Total Rs. 156.30

SPONSORED RESEARCH PROJECTS COORDINATED

Academic Year

TITLE OF THE PROJECT Amount Received

in Lakhs

2006-2007 AICTE - Reliability Analysis of Software based

Mechatronics system using Virtual Instrumentation. 8.00

2006-2007

AICTE - Modelling and Optimization of Process Parameters

of Wire EDM based on Robust Design for improved surface

finish

10.00

2007-2009 NRB - Friction Stir welding of Aluminium Titanium boride

metal matrix composites 15.96

2007-2009 UGC - Production and characterization of Nano- sized

semiconductor crystallites of CdS and CdTe 8.50

Total 42.46

MAJOR EQUIPMENTS PURCHASED AND INSTALLED DURING MY TENURE AT CIT

CYBER MILL - CNC Milling Machine from Feedback Instruments Ltd., UK

Silicon Graphics O2 Work Stations - 2 Nos.

EUROBTEC - Work Cell EL Module- (GERMANY)

MATLAB and Simulink

I-DEAS from SDRC 2 Nos.

Promodel- Manufacturing Simulation Software

FLUENT - Computational Fluid Dynamics Windows NT Software

CATIA, ARENA, ANSYS for CIM Laboratory

Mitutoyo/Coordinate Measuring Machine /QM-Measure 333

Mitutoyo/Tool Maker‟s Microscope

Mitutoyo/ Profile Projector PJ-A3000

10

Labovision Ferascan FE PRO 900

IDEAS NX CAD Bundle: Artisan + Surfacing v11 with SE and SW

NX(VIRTUAL NC) and Machine Simulation

eM - Workplace (IGRIP)

Pneumatic Circuit with PLC

LMW Smartturn CNC Lathe and VMC LV 65

Wire Cut EDM - (EZEE cut) Electronica

SYNERGIC GMA/GTA/MMA WELDING SYSTEM From Esseti, Italy with PC Interface

Automatic Welding Manipulator

Automatic Hardfacing Manipulator

AC GILL Corrosion resistance measuring system with software.

Ferritescope with PC interface

DAQ - 6024 - E, BNC 2120 Lab View software

Ph.D. GUIDED AND AWARDED

1. “Analysis on Performance Measurements of Manufacturing Systems using Synchronous

Principles for Higher Productivity” – R.Sivasubramanian, March 2001.

2. “Performance Analysis of Small and Medium Enterprises through Re-Engineering” -

R. Subramanian, January 2002.

3. “Analysis and Determination of Batch Size for Multi-Stage, Multi-Facility and Multi-Product

Manufacturing Systems” - P.Nagaraj, June 2002.

4. “An investigation on integration of DBR (Drum Buffer Rope) and JIT (Just in Time) Philosophies

for Kaizen in Small and Medium Enterprises” - N.Rajam Ramasamy, December 2002

5. “Enterprise Modelling for Attaining, Reengineered Vital Quality Drivers” – V.Senthil, January

2003

6. “Investigation of Machine Tool Chatter by Optimal Tool Parameters using Evolutional Algorithm”

– T. Alwarsamy, July 2005.

7. „Performance Analysis on Parallel Machine Scheduling through Hybrid Dispatching Rules”

- P.V Senthiil, November 2005.

8. “Investigation on the Effect of Transformation Strain in Constitutive Modeling of Shape Memory

Alloy”, S.P.Arul, April 2006.

9. “Closed form Solution for Acceptance Sampling using Artificial Neural Networks”, D.Vasudevan,

May 2006.

10. “Design and Optimization of Manufacturing Facilities Layout”, K.Balamurugan, October 2006.

11. “Modelling and Analysis of Sustainable Development through Green Productivity”, N.Mohan

Das Gandhi, September 2007.

12. “An Exploration on the Adoption of Executive Support System for Strategic Maintenance

Quality Engineering Model”, K.Elangovan, March 2008.

13. “Analysis of Flexible Parallel Machine Scheduling through Metaheuristics”, K. Raja, April 2008.

11

14. “Experimental investigations on the impact of turning parameters for maximizing tool life”,

P.Thangavel, June 2008.

15. “An investigation into the use of Hybrid Search Techniques for Job-Shop Scheduling problem to

minimize makespan”, P.Senthil Velmurugan, September 2008.

16. “Investigation of Total Quality Function Deployment for Continuous Improvement in Batch

Manufacturing System”, S.Venkatachalam, December, 2008.

17. “Analysis of Agile Manufacturing System for Optimal Performance”, C.Arumugam, December,

2008.

18. “Experimental investigations on the Performance of Environmentally Friendly Refrigerant

Mixtures in a Vapour Compression Refrigeration System as Alternate to CFC12 and

HFC134A”, K.Mani, December, 2008.

19. “Analysis on Multi-Criteria Decision Making for Supplier Selection”, G.Sasikumar, March 2009.

20. “Analysis on Cell formation in Cellular Manufacturing Systems towards Optimal Performance”,

M. Murugan, May 2009.

21. “Analysis of the Effects of Process Parameters in End Milling on Silicon Particulate Aluminium

Metal Matrix Composite Materials”, B.Ganesh Babu, May 2009.

22. “Some study on Knowledge Management Educational System for faculty allocation in a Flexible

Technical Curriculum” V.K.Shanmuganaathan, June 2009.

23. “Studies on the effect of reinforcements on the mechanical properties of hybrid aluminum alloy

composites” – P.Satheyabalan, August 2009

24. “A Simulated Annealing Methodology for Multi Stage Logistics in Supply Chain Management” –

P.Manimaran, December 2009

25. “An exploration on adoption of inventory optimization using metaheuristic techniques” – S.Narmada ,

March 2010

26. “Fluid flow and heat transfer study of slot jet impingement flows” – A.Sivasmay, Dec 2010

27. “Investigation of the behavior characteristics of material used in bio-medical application” –

V. Muthukumaran, December, 2010.

28. “Numerical Analysis of Magnetoconvection in Square Enclosures with Differentially Thermally active

Vertical Walls”, S.Gokila, December, 2011.

29. “Nemerical and Experimental Study on Flow and Mixing Behaviour of Transverse turbulent jet in Venturi –

jet Mixer”, S.Sundararaj, December 2011.

30. :Modelling and Optimization of Airport Runway”, K.Venkata Rao, Janaury, 2012.

31. “Optimization of Clearance Variation in Linear and Radial Selective Assembly”,R.Kannan, October 2012.

M.S. BY RESEARCH GUIDED AND AWARDED

1. “Analysis of Cell formation using Metaheuristics and Memetic Algorithm”, R.Sivaprakasam,

October 2008.

12

DOCTOR OF SCIENCE (D.Sc.) THESIS EVALUATED AND VIVA VOCE EXAMINATION

CONDUCTED

1. “Development of Strategic Quality Engineering Accounting System”, Bharathiar University”,

Coimbatore, Dr. S.R.Devadasan, June 2008.

Ph.D. THESIS EVALUATED

1. “Stochastic Processes in Cellular Manufacturing Environment” – Madhusudanan Pillai (January

2005), National Institute of Technology, Calicut.

2. “Heuristic Search Algorithms for Scheduling in Flow Shops with Lot Streaming” – S.Marimuthu

(June 2005), Manonmaniam Sundaranar University, Tirunelveli.

3. “Decision Support System for Production Planning in SSI Units using Management Science”,

(January 2006) A.Jawahar Babu, JNTU, Hyderabad.

4. “Optimization Techniques for Multi-Objective Supplier Selection with Quantity Discounts using

Integer Linear Programming and Meta Heuristics”, N.Arunkumar, (August 2006), Anna

University, Chennai.

5. “Parametric Evaluation of Quality Turned Components Through Optimization Techniques”,

T.Srikanth (April 2009), Osmania University, Hyderabad.

6. “Experimental Investigation and statistical analysis on mechanical properties of Aluminium

based metal matrix composites”‟ A.Suresh Babu, Anna University Chennai, August 2009.

7. “Reliability based design optimization of composite drive shaft using heuristics”, D.Jabakani,

Anna University, Chennai, September 2009.

8. “Design and development of a quality information system of excellence in technical education”

– P.Karuppuchamy, Anna University Chennai, January 2010.

9. “Eigenvalue Reanalysis of simple and compound beam structures with and without damping

treatment using structural dynamic modification”, - M.Lakxmi Kanta Reddy, JNTU Anantapur

January 2010.

10. “Predicting the properties of Aluminum Silicon Eutectic alloy subjected to modification and

vibration during solidification”, K.Srinivasalu Reddy, JNTU Kakinada, January 2010.

Ph.D. PUBLIC VIVA-VOCE EXAMINATION CONDUCTED

1. “Genetic Based Decision Models for Intelligent Manufacturing System” - T.K.Kurian, University

of CALICUT, REC, Calicut, October 1999.

2. “Studies on Grind Hardening Effect in Cylindrical Grinding” - V.S.K.Venkatachalapathy,

Department of Production Technology, MIT, Anna University, Chennai - 600 044, 2005.

3. “Studies on Parametric influences of CNC Wire EDM Process for Machining of AISI 02 Tool

Steel and inconel 718”, - S.Ramakrishnan, Anna University, Chennai, 2006.

13

4. “Heuristic Search Algorithms for Scheduling in Flow Shops with Lot Streaming”, - S.Marimuthu,

Manonmaniam Sundaranar University, Tirunelveli, April 2006.

5. “Flexible Manufacturing System Scheduling”, - K.S.Badarinarayan, National Institute of

Technology, Calicut, February 2008.

6. “Heuristic and Search Algorithms for Facility Layout Design”- A.S.Ramkumar, Manonmaniam

Sundaranar University, Tirunelveli, June 2008.

7. “Study and Analysis of Supplier Selection by Multi Attribute Decision Making and Discrete

Choice Experiment Approaches”, - B.A.Saravanan, Anna University, Chennai, December 2008.

8. “Strategic OEE Models for Assessing Real Effectiveness to Improve the Deployment of

Manufacturing Resources”, - P.Nelson Raja, Anna University, Chennai, December 2008.

9. “Investigations of Wear and Fatigue on Roller Chains of Motorcycle”, - P.Sadagopan, Anna

University, Chennai, February 2009.

10. “Development of an Integrated closed loop performance management model for service

industries”, R.Parameshwaran, Anna University Chennai, October 2009.

11. “Experimental Investigation and statistical analysis on mechanical properties of Aluminium

based metal matrix composites”‟ A.Suresh Babu, Anna University Chennai, November 2009.

12. “Reliability based design optimization of composite drive shaft using heuristics”, D.Jabakani,

Anna University, Chennai, November 2009.

13. “Design and development of a quality information system of excellence in technical education”

– P.Karuppuchamy, Anna University Chennai, February 2010.

14. “Some Investigations on Friction Stir Spot Welding of Age Hardenable Aluminium Alloys” –

R.Karthikeyan, Annamalai University, June 2012.

M.S. (BY RESEARCH) EVALUATED

1. “Experimental Studies on Flow Accelerated Corrosion in Feeder Pipe of Pressurized Heavy

Water Reactor”, P.Madasamy, Anna University, 2006.

AWARDS / PRIZES/CERTIFICATION RECEIVED

1. Received Best Teacher Award in the academic year 1999-2000 instituted by Coimbatore

Institute of Technology.

2. Best Journal Paper Award for the research paper entitled “Performance improvement

behavior of a small scale enterprises”, Journal of Industrial Engineering, Indian Institution of

Industrial Engineering, Vol. XXX No.10, October, 2001, pp. 24 - 33 - Received Award on

November 2002, in IIIE National Convention.

3. Best Session Paper Award for D.Vasudevan, V.Selladurai, P.Nagaraj, “A Closed form

solution to single Sampling Attribute plans indexed by AQL,LQL and AOQL”, National

14

Conference on Challenges in Achieving Global Quality, CAGQ, May 25-25, 2004, Department

of Mechanical Engineering, Thiagarajar College of Engineering, Madurai, India.

4. Award of Appreciation: The Board and Members of Project Management Institute, Pearl city

chapter, Hyderabad appreciate the contribution of V.Selladurai for organising the one day

symposium, January 22nd

, 2005 on Project Management as part of PMCDP 2004-05 as

co-ordinator.

5. Best Session Paper Award for K.Elangovan, V.Selladurai, S.R.Devadasan, S.Muthu,

“Executive Support System for Strategic Maintenance Quality Engineering Programme:

An Experimental Model”, International Conference on (EISCO 2005), January 5-7, 2005.

Kumaraguru College of Technology, Coimbatore.

6. Best Paper Award - Technical Session 2-Third Prize for K.U.Khmeswaran, S.P.Arul,

V.Selladurai, “Implicit modeling of Shape memory alloy behavior using artificial and neural

network”. Twelfth National Convention of Electrochemists (NCE-12) - Society for Advancement

of Electrochemical Sciences and Technology (SAEST), Thiagarajar College of Engineering,

Madurai, February 18-19, 2005,

7. Coimbatore Institute of Technology, Outstanding Engineering Institute (South) – National

B School Awards 2011 – by STAR News, February 2011.

8. Coimbatore Institute of Technology, Outstanding Engineering Institute (South) – National

B Schools Awards 2012 – by ABP News, June 2012.

CONFERENCES / COURSES ORGANISED

International Conferences

1. Intelligent Flexible Autonomous Manufacturing Systems (IFAMS 2000) - Towards Rapid

Design Exploration and Optimization, January 10 - 12, 2000.

2. Digital Aided Modeling and Simulation (DAMS 2003) - An evolutionary Approach for

Optimization, January 6 - 8, 2003.

3. Responsive Supply Chain Management (RSC 2004) - A Technology Watch, January 5 - 7,

2004, jointly with University of Massachusetts, Dartmouth, USA.

4. International Conference on Global Manufacturing and Innovation (GMI 2006) -

(An Advanced Optimization Technology Approach), July 27 - 29, 2006, jointly with University

of Massachusetts, Dartmouth, USA, in collaboration with Benchmarking: International Journal,

International Journal of Operational Research and International Journal of Industrial and

Systems Engineering.

5. International Conference on Digital Factory (ICDF 2008), August 11 - 13, 2008, jointly with

Business Innovation Research Center (BIRC), University of Massachusetts, Dartmouth, USA

and in co-ordination with Bench Marking: An International Journal, International Journal of

Industrial and Systems Engineering, International Journal of Indian Culture and Business

15

Management, International Journal of Business Innovation and Research and International

Journal of Procurement Management.

National Level Conferences

1. Intelligent Manufacturing Systems - A Technology Watch, February 6 - 7, 1998.

2. Strategies for New Product Development, September 9 -10, 2005.

3. Manufacturing & Management of Intelligent Materials, March 17-18, 2006.

Short Term / Winter / Summer Courses Organized

1. Organized “Entrepreneurship Awareness Camp” - Sponsored by Department of Science

and Technology, Government of India, September 8 - 10, 1988.

2. AICTE – QIP – STTP course on Computer Integrated Industrial Systems, March 15 - 29, 1998

for Engineering College Teachers.

3. AICTE SPONSORED Two days workshop on Computational Fluid Dynamics- Modelling and

Applications, January 12 - 13, 2000.

4. UGC sponsored winter short term course on Computational Fluid Dynamics – Theoretical

Modelling and Simulation, January 02 - 10, 2001.

5. International Workshop on Supply Chain Management, jointly with UMASSD, USA, August

19-20, 2005.

Industrial Evaluation

1. Study on Job Evaluation and Merit Rating for the Entire Factory System, M/s. Madras

Aluminium Company Ltd., Mettur Dam, 1986-1987.

2. Design, Manufacture and Supply of Spare Parts for Madras Aluminium Company Ltd.,

Mettur Dam, 1997 Onwards.

3. Quality circle evaluator for M/s. ELGI Equipments Ltd., Coimbatore.

PROCEEDINGS EDITED

1. Proceedings of International Conference On Digital Factory (ICDF 2008), August 11-13,

2008, Jointly with Business Innovation Research Center (BIRC), University of Massachusetts,

Dartmouth, USA and in co-ordination with Bench Marking: An International Journal,

International Journal of Industrial and Systems Engineering, International Journal of Indian

Culture and Business Management, International Journal of Business Innovation and Research

and International Journal of Procurement Management.

2. Proceedings of International Conference on Global Manufacturing And Innovation –

(An Advanced Optimization Technology Approach) GMI 2006, July 27 - 29, 2006, jointly with

University of Massachusetts, Dartmouth, USA.

16

3. Proceedings of the International Conference on Responsive Supply Chain Management

(RSC 2004) - A Technology Watch, January 5-7, 2004, jointly with University of Massachusetts,

Dartmouth, USA.

4. Proceeding of the International Conference on Digital Aided Modelling and Simulation

(DAMS 2003) - An evolutionary Approach for Optimization, January 6 - 8, 2003.

5. Proceeding of the International Conference on Intelligent Flexible Autonomous

Manufacturing Systems (IFAMS 2000) - Towards Rapid Design Exploration and Optimization,

January 10 - 12, 2000.

6. Proceedings of the National Conference on Intelligent Manufacturing Systems

- A Technology Watch, February 6 - 7, 1998

7. Proceedings of AICTE - QIP - STTP Course on Computer Integrated Industrial Systems,

March 15 - 29, 1998 for Engineering College Teachers.

MEMBERSHIP IN PROFESSIONAL BODIES

Life Member in Indian Society for Technical Education, New Delhi

Life Fellow Member in Institution of Engineers (India), Kolkata

Life Fellow Member in Indian Institution of Industrial Engineering, Bombay

Life Member in Computer Society of India.

Life Fellow Member in Indian Institution of Production Engineers, Bangalore.

Senior Life Member in Operational Research Society of India.

Life Member in Systems Society of India.

REVIEWER OF JOURNALS / PROCEEDINGS

Reviewer for International Journal of Quality & Reliability Management, UK.

Reviewer for the Proceedings of the National Conference on Computer Integrated Design

and Manufacturing (NCCIDM), May14-15, 2001, Amrita Institute of Technology and

Science, Coimbatore.

Reviewer for the Proceedings of the International conference on Logistics and Supply

Chain Management in association with Michigan University, USA, August 6-8, PSG College

of Technology, Coimbatore, 2001.

Reviewer for Iranian Journal of Science and Technology.

Reviewer for South African Journal of Industrial Engineering.

Reviewer for TECHNOLOGY Journal, PSG College of Technology.

KEYNOTE ADDRESSES DELIVERD

Delivered a Keynote address on Manufacturing Systems Engineering in National Seminar

on Optimization Techniques In Manufacturing Practice - 2000, 18th March, 2000 sponsored

17

by CII – Coimbatore Chapter and organized by Department of Mechanical Engineering,

Kumaraguru college of Technology, Coimbatore - 600 006.

USA (April / May 2008)

- UMASSD, Dartmouth

Presented the research article entitled, “Supplier Selection through

Analytical Hierarchy Program and Fuzzy Set Theory”, April 28th, 2008,

CCB-BIRC.

- Wichita State University

Presented the research article entitled, “Flexible Parallel Machine

Scheduling”, Industrial and Manufacturing Engineering Department, May

22nd

, 2008.

Thailand (November 2008)

- Naresuan University, Phitsanulok

Presented a Technical paper, “Information Technologies for

Knowledge Management: Their Usage and Effectiveness”.

CONFERENCE CHAIRED

Chaired Technical Session in CAD/CAM, Robotics and Factories of Future, PSG College of

Technology, Coimbatore, December 1-3, 1998.

Chaired Technical Session in National Conference on Computer Integrated Design &

Manufacturing (NCCIDM), May 14 - 15, 2001, Amrita Institute of Technology and Science,

Coimbatore

Chaired Technical Session in National Conference in Advanced Computing (NCAC 2003)

at PSG College of Technology, Coimbatore on 02.02.2003.

RESEARCH PUBLICATIONS

INTERNATIONAL JOURNALS

1. V.Muthukumaran, V.Selladurai, S.Nandhakumar, M.senthilkumar,”Experimental investigation on

corrosion and hardness of ion implanted AISI 316L stainless steel”, Materials and Design, 31, 2010, pp.2813-2817.

2. P.Manimaran, V.Selladurai, W.C.Yeh, M.Sivakumar,” Particle Swarm Optimization for fixed-charge transportation problem in a Multistage Supply Chain Network”, International Journal of Logistics Systems and Management, Vol. No. 2010.

18

3. P.Manimaran, V.Selladurai, R.Rajesh, G.Sasikumar, ”Genetic Algorithm for Optimization of

distribution system in a single stage supply chain network with fixed charges”, International Journal of Industrial and Systems Engineering, Vol. No. 2010.

4. P.Manimaran, V.Selladurai, R.Rajesh, “A Simple heuristics for optimization of unbalanced multistage supply chain logistics associated with fixed charges” , International Journal of Procurement Management, Vol. No. 2010.

5. G.Sasikumar, V.Selladurai, P.Marimamaran, “An Integrated model for Supplier Selection using Fuzzy Analytical Hierarchy Process: A Steel plant case study”. International Journal of Procurement Management, Vol. 3, No. 1/2, 2010.

6. K.P.Arulshri, K.P.Padmanaban, V.Selladurai, “Constitute modeling of shape memory alloy using

Artificial Neural Network”. Journal of Manufacturing, Vol.1, No. VIII, 2009, pp. 61-65. 7. B. Ganesh Babu, V.Selladurai, V.Saravannan, “Stability Analysis of End milling AlSiC Metal matrix

composite materials using Finite Element Analysis in Time (FEAT)”. International Journal of Manufacturing Sciences and Production, 2009.

8. P.Sathyabalan, V.Selladurai, P.Sakthivel, “ANN based Prediction of effect of Reinforcement on

Abrasive Wear loss and Hardness in a Hybrid MMC”. American Journal of Engineering and Applied Sciences, Vol. 2(1), 2009, pp. 50-53.

9. G.Sasikumar, V.Selladurai, P.Marimaran, “An Integrated model for Supplier Selection: An

automobile industry case study”. International Journal of Services and Operations Management, Vol. 5, No. 6, 2009.

10. R.Amuthakannan, SM.Kannan, V.Selladurai, and A.Vijayalakshmi, “Software Quality measurement

and improvement for real time system using Quality Tools and Techniques”, International Journal of Industrial and Systems Engineering, Vol. 3, No. 1, 2008, pp. 229-256.

11. B.Ganesh Babu and V.Selladurai,” Sensitivity analysis of the mathematical models of cutting force

parameters, tool flank wear and surface roughness of end milling Al-SiC metal matrix composite material”, Journal of Manufacturing Engineering, No. 4, Vol. 7, 2008, pp. 35-38.

12. K.Mani and V.Selladurai, “Energy Savings with the effect of Magnetic field using R290/600a

mixture as substitutes for CFC12 and HFC134a”, International Journal of Thermal Science, Vol. 12 (2008), No. 3, pp. 111-120.

13. M.Murugan and V.Selladurai, “Improving Productivity in Manufacturing „S‟ Cam Shafts using

Implementation of Lean Manufacturing Systems”. International Journal of Manufacturing Sciences and Production, Vol. 9, No. 3-4, 2008, pp. 119-144.

14. K.Mani and V.Selladurai, “Experimental Analysis of a new Refrigerant mixture as drop-in

replacement for CFC12 and HFC134a”, International Journal of Thermal Sciences, 47(2008), pp. 1490-1495.

15. M.Murugan and V.Selladurai, “Reverse Engineering on Port cores of a cylinder head using

digitizing technique”. International Journal of Manufacturing Science and Production, Vol. 9, No. 1-2. 2008, pp. 33-44.

16. P.Thangavel and V.Selladurai, “An Experimental Investigation on the effect of turning parameters

on surface roughness”. International Journal of Manufacturing Research, 2008, Vol. 3, No. 3, pp. 285-300.

19

17. M.Murugan and V.Selladurai, “Scheduling flow line manufacturing cell through Multi objective

Memetic algorithm”. Journal of Manufacturing Engineering, Vol. 2, No. VII, 2008, pp. 90-94. 18. R.Sivaprakasam and V.Selladurai, “A memtic algorithm for minimizing exceptional elements in cell

formation”. Asian Journal of Scientific Research, Vol.1, No. 2, 2008, pp. 138-145. 19. K.Elangovan, V.Selladurai, S.R. Devadasan. S.Thirumurugaveerakumar and S.Vinodh, “Executive

support for developing maintenance quality mission statement”. International Journal of Services and Operations Management, Vol.4, No. 5, 2008, pp. 580-603.

20. G.Sasikumar, V.Selladurai and A.Sivasangari, “Development of Supplier Selection System by

combining Analytic Hierarchy Process and Gray Relational Analysis: An Automobile Industry case study”, The ICFAI University Journal of Supplier Chain Management, Vol. 5, No. 4, 2008, pp. 82-94.

21. K.Elangovan, V.Selladurai, S.R.Devadasan, S.Thirumurugaveerakumar and S.Vinodh, “Executive

support for developing maintenance quality mission statement “International Journal of Services and Operations Management, Vol. 4, No. 5, 2008, pp. 580 - 603.

22. K.Raja, C.Arumugam and V.Selladurai, "Non-identical parallel machine scheduling using Genetic

Algorithm and Fuzzy Logic approach", International Journal of Services and Operations Management, Vol. 4, No. 1, 2008, pp. 72-101.

23. R.Sivaprakasam and V.Selladurai, “A Genetic Algorithm Approach for minimizing exceptional

elements in cell formation”. Journal on Future Engineering and Technology, Vol. 3, No. 1, 2007, pp. 16-19.

24. C.Arumugam, K.Raja and V.Selladurai, "Agility in two-stage hybrid flow shop parallel machine

scheduling through Simulated Annealing", International Journal of Services and Operations Management, Vol. 3, No. 3, 2007, pp. 332-354.

25. T.Alwarsamy, P.Thangavel and V.Selladurai, “Reduction of machining vibration by use of Rubber

Layered Laminates between tool holder and insert”, International Journal of Machining Science and Technology, Vol. 11, No. 1, 2007, pp. 135-143.

26. M. Murugan and V. Selladurai, “Optimization and implementation of cellular manufacturing system

in a pump industry using three cell formation algorithms”, International Journal Advanced Manufacturing Technology, Vol. 35, No. 1-2, 2007, pp. 135-149.

27. K.Raja, V.Selladurai and R.Saravannan, “Simulated Annealing Approach for minimizing Makespan

in Flexible Parallel Machines”, Caledonian Journal of Engineering, Vol. 3, No. 2, 2007, pp. 35-41. 28. S.Rajakumar, V.P.Arunachalam and V.Selladurai, “Workflow Balancing in Parallel Machines

through Genetic Algorithm”, International Journal of Advanced Manufacturing Technology, Vol. 33, No. 11-12, 2007, pp. 1212-1221.

29. P.V.Senthiil and V.Selladurai, “Optimal Job Shop Scheduling Performance Enhancement through

Computer Based Simulated Annealing Technique”. International Journal of Manufacturing Science and Production, Vol. 8, No. 2-4, 2007, pp. 169-180.

30. K.Mani and V.Selladurai, “Experimental Studies on the effect of Magnetic field in energy

consumption using R134a, LPG and LPG/R134a mixture as a substitutes for CFC12 Systems”, International Journal of Applied Engineering Research, Vol. 2, No. 3, 2007, pp. 411-420.

20

31. K. Balamurugan, V. Selladurai and B. Ilamathi, “Solving unequal area facility layout problems using genetic algorithm”, International Journal of Logistics System and Management, Vol. 2, No. 3, 2006, pp. 281-301.

32. D.Vasudevan and V.Selladurai, “Average outgoing quality limit and Lot Tolerance Percent

Defective indexed acceptance sampling plans using artificial neural network”, International Journal of Productivity and Quality Management, Vol.1, No. 4, 2006, pp. 411-424.

33. K.Elangovan, V.Selladurai, S.R.Devadasan, S.K.Goyal and S.Muthu, “Quality and Productivity

improvement by executive decisions in Maintenance Engineering: ESS based approach”, International Journal of Productivity and Quality Management, Vol. 2, No. 4, 2006, pp. 112-139.

34. K.Elangovan, V.Selladurai and S.R.Devadasan, “Maintenance Quality Policy Statement: It‟s

Research, Design and Executive Support System”, International Journal of Technology, Policy and Management, Vol. 6, No. 3, 2006, pp. 237-255.

35. N.Mohan Das Gandhi, V.Selladurai, P.Shanthi, “Unsustainable Development to Sustainable

Development: A Conceptual Model”, Management of Environmental Quality: An International Journal, Vol.17, No. 6, 2006, pp. 654-672.

36. N.Mohan Das Gandhi, V.Selladurai and P.Shanthi, “Green Productivity Indexing: A Practical Step

towards Integrating Environmental Protection into Corporate Performance”, International Journal of Productivity and Performance Management, Vol. 55, No. 7, 2006, pp. 594-606.

37. N.Mohan Das Gandhi, V.Selladurai and P.Shanthi, “Computer Integration using the Mckinsey‟s 7S

model as an underlying frame work: A case in the Foundry”, International Journal of Information Technology and Management, Vol. 5, No. 2/3, 2006, pp. 175-196.

38. P.Thangavel, V. Selladurai and R.Shanmugam, “Application of Response Surface Methodology for

Predicting Flank Wear in Turning Operation”, Journal of Engineering Manufacture, Vol. 220, No. 6, 2006, pp. 997-1003.

39. P.Thangavel, V. Selladurai and R.Shanmugam, “Sensitivity Analysis of Tool Flank wear model of

Turning Process”, Journal of Manufacturing Engineering, Vol. 5, No. 4, 2006, pp. 16-21. 40. G.Sasikumar and V.Selladurai, “Analytic Hierarchy Process as a Decision Support System in

Automobile Industry”, Journal of Manufacturing Engineering, Vol. 5, No. 3, 2006, pp. 41-45. 41. K.Balamurugan, V.Selladurai and B.Ilamathi, “Design and optimization of manufacturing facilities

layouts “, Journal of Engineering Manufacture, Vol. 220, No. 8, 2006, pp. 1249-1257. 42. S.P.Arul, K.Saravanan, V.Selladurai and J.B.Joshi, “Investigations on one dimensional constitutive

model for shape Memory Alloy”, Canadian Journal of Chemical Engineering, 2006. 43. S.P.Arul, K.Saravanan and V.Selladurai, “Optimization of Bio Medical Stent Using Finite Element

Method”, International Journal of Plastic Element, 2006. 44. S.P.Arul, K.Saravanan and V.Selladurai, “Constitutive Modeling of Shape Memory Alloy using

Artificial Neural network”, Hungarian Journal of Chemical Engineering, 2006. 45. S. Rajakumar, V.P.Arunachalam and V.Selladurai, “Simulation of workflow balancing in assembly

shop floor operations”, International Journal of Manufacturing Technology Management, 2005, Vol. 16, No. 3, pp. 265-281.

21

46. S.Rajakumar, V.P.Arunachalam and V.Selladurai, “Workflow Balancing Strategies in Parallel Machine Scheduling”, International Journal Advanced Manufacturing Technology, Vol. 23, No. 5-6, 2005, pp. 366-374.

47. K.Balamurugan, V.Selladurai and B.Ilamathi, “Optimization of Machine Layout problems”, Journal

of Manufacturing Engineering, Vol. 4, No. 4, 2005, pp. 41-44. 48. K.Balamurugan, B.Ilamathi and V.Selladurai, “Fuzzy expert system for wire EDM process control”,

Journal of Manufacturing Engineering, Vol. 2, No. 5, 2005, pp. 7-9. 49. N.Rajam Ramasamy and V.Selladurai, “Fuzzy logic approach to prioritize engineering

characteristics in quality function deployment (FL-QFD)”, International Journal of Quality and Reliability Management, Vol. 21, No. 9, 2004, pp. 1012-1023.

50. D.Vasudevan, V.Selladurai and P.Nagaraj, “Determination of closed from solutions for acceptance

sampling”, International Journal of Quality Assurance, Good Practice, Regulation and Law, Vol. 11, No. 1, 2004, pp. 43-61.

51. P.Nagaraj and V.Selladurai, “Function Approximation of Total System Cost for a continuous

Manufacturing System”, International Journal of Operations and Production Management, Vol. 23, No. 4, 2003 pp. 430-439.

52. R.SivaSubramanian, V.Selladurai and A.Gunasekaran, “Utilization of Bottle-neck Resources for

Profitability through Synchronized operation of Marketing and Manufacturing”, International Journal of Integrated Manufacturing Systems, Vol. 14, No. 3, 2003, pp. 238-246.

53. R.SivaSubramanian, V.Selladurai and A.Gunasekaran, “Optimum Production Schedule and Profit

Maximization using the concept: Theory of Constraints”, International Journal of Manufacturing Technology Management, Vol. 5, No. 4, 2003, pp. 325-337.

54. S.P.Arul, T.S.Kulandaisamy and V.Selladurai, “Thermo mechanical response of shape memory

wire (nitinol): constitutive modeling, finite element implementation and numerical simulation”, Proceedings of SPIE- Vol. 5062, Smart Materials, Structures and Systems, 2003, pp. 922-927.

55. P.Nagaraj and V.Selladurai, “Analysis of optimum batch size in Multi-stage, Multi-facility and Multi-

product Manufacturing systems”, International Journal of Advanced Manufacturing Technology. Vol. 19, No. 2, 2002, pp. 117 - 124.

56. N.Rajam Ramasamy, V.Selladurai and A.Gunasekaran, “Just-In-Time Implementation in Small and

Medium Industries”, International Journal of Work Study, Vol. 51, No. 2, 2002, pp. 85-90. 57. V.Senthil, S.R.Devadasan, V.Selladurai and R.Baladhandayutham, “Integration of BPR and TQM;

past, present and future trends”, International Journal of Production Planning and Control, Vol. 12, No. 7, 2001, pp. 680 - 688.

58. R.Sivasubramanian, V.Selladurai and N.Rajam Ramasamy, “The effect of the drum-buffer-rope

(DBR) approach on the performance of a Synchronous Manufacturing System (SMS)”, International Journal of Production Planning and Control, Vol. 11, No. 8, 2000, pp. 820-824.

59. P.Aravindan, S.R.Devadasan, E.Narashima Reddy and V.Selladurai, “Experts system for

implementation for successful Quality Circle Programs in Manufacturing Firms”, International Journal of Quality and Reliability Management, Vol. 13, No. 7, 1996, pp. 57-68.

22

60. P.Aravindan, S.R.Devadasan and V.Selladurai, “A Forced Model for Strategic Quality Management”, International Journal of Quality and Reliability Management, Vol. 13, No. 8, 1996, pp. 79-96.

61. V.Selladurai, P.Aravindan and R.Satheesan, “Development of computer simulator for dynamic

scheduling of FMS to achieve optimal scheduling”, International Journal of Advanced Manufacturing Technology, Vol. 12, No. 2, 1996, pp. 145-152.

62. V.Selladurai, P.Aravindan, S.G.Ponnambalam and A.Gunasekaran, “Dynamic simulation of

scheduling of job shop manufacturing system”, International Journal of Operations and Productions Management, Vol. 15, No. 7, 1995, pp. 106-119.

63. P.Aravidan, S.R.Devadasan and V.Selladurai, “Continuous Quality Improvement through Taguchi‟s

Online Quality Control Methods”, International Journal of Operations and Production Management, Vol. 15, No. 7, 1995, pp. 60-77.

NATIONAL JOURNALS 1. S.P.Arul, V.Selladurai and P.Balasubramanian, “Computer Simulation of Bio-Medical Stent using

finite element Method”, ACCST Research Journal, Vol. IV, No. 1, 2006. 2. K.Raja, R.Saravanan and V.Selladurai, “Optimization of Parallel Machine Scheduling (PMS) using

Intelligent Techniques”, Journal of Manufacturing Technology Today, Vol. 5, No. 1, 2006, pp. 12-15. 3. N.Mohan Das Gandhi, V.Selladurai and P.Santhi,” Continuous Improvement: Kaizen for

minimization” Journal of Manufacturing Technology Today, Vol. 5, No. 4, 2006, pp. 24-28. 4. N.Mohan Das Gandhi and V. Selladurai, “Sustainable Development through Green Productivity: A

case study of Cast Iron Foundry”, Indian Foundry Journal, Vol. 52, No. 2, 2006, pp. 32-37. 5. P.Thangavel and V.Selladurai, “Tool flank wear measurement using BPN”, Journal of

Manufacturing Technology Today, Vol. 5, No. 8, 2006, pp. 11-16. 6. K.Raja, R.Saravanan and V.Selladurai, “Multi-objective Optimization of Parallel Machine

Scheduling (PMS) using Genetic Algorithm and Fuzzy Logic Approach” Institution of Engineers (India), Production Engineering Journal, Vol. 87, 2006, pp. 25-30.

7. K.Raja, C.Arumugam, V.Selladurai and V.M.Senthil Kumar, "Non-identical parallel machine

scheduling using Simulated Annealing Technique", Journal on Engineering and Technology, Vol. 2, No. 1, 2006.

8. P.Senthil Velmurugan and V.Selladurai, “Optimization - Inspiration from Ant Behaviour”, ACCST

Research Journal, Vol. III, No. 2, April 2005. 9. K.Balamurugan, V.Selladurai and B.Ilamathi, “Application of simulation and genetic algorithm for

facility layout design”, National Journal of Manufacturing Technology and Management of Indian Institution of Production Engineers, Vol. 2, No. 1, 2005, pp. 3-7.

10. N.Rajam Ramasamy and V.Selladurai, “An analysis of imparting CPI (Continuous Process

Improvement) in SMEs, Journal of Industrial Engineering, Vol. XXXIV, No. 5, 2005. 11. N.Mohan Das Gandhi, V.Selladurai and P.Santhi, “Technological inputs for improving productivity

in the CI foundry: Finite element simulation strategies, “Journal of Manufacturing Technology Today, Vol. 4, Issue 8, 2005, pp. 3-6.

23

12. K.Balamurugan, V.Selladurai and B.Ilamathi, “Solving faculty layout problems using Excel and GA”, Indian Journal of Information Science and Technology, Vol. 1, No. 1, Nov. 2005, pp. 43-52.

13. D.Vasudevan, V.Selladurai and P.Nagaraj, “Sampling plans for controlling AQL using ANN”,

Industrial Engineering Journal, Vol. XXXIV, No. 9, 2005, pp. 29-32. 14. B. Ilamathi, K.Balamurugan and V.Selladurai, “Optimization of Multiobjective multi pass Turning

operations using GA”, Journal of Manufacturing Technology, Vol. 1, 2005, pp. 15-20. 15. T.Alwarsamy, V. Selladurai, P.Thangavel, M.Murugan and A.Gupta Das, “Improvement of Dynamic

behavior of boring tools using load Damper and impact Damper”, Journal of Manufacturing Technology Today, Vol. 4, No.11, 2005.

16. D.Vasudevan, V.Selladurai and P.Nagaraj, “Simultaneous Control of AOQL and LTPD by sampling

plans using ANN”, PARITANTRA, A Journal of Systems Science and Engineering, Systems Society of India, Vol. 9, No.1, 2004, pp. 16-23.

17. P.V.Senthil, V.Selladurai and R.Rajesh, “Parallel Machine Scheduling (PMS) in Manufacturing

Systems using the ANT colonies optimization algorithmic rule”, PARITANTRA, A Journal of systems Science and Engineering, Systems Society of India, Vol. 9, No.1, 2004, pp. 43-50.

18. R.Prakasam, S.Dhandapani and V.Selladurai, “Optimization of humidification system in spinning

mills”, The Indian Textile Journal, Vol. XXX, No. 9, 2003, pp. 27-36. 19. P.Nagaraj and V.Selladurai, “Lot sizing for a Multi Product - Multistage manufacturing system by

Fuzzy Logic”, Journal of Industrial Engineering, Indian Institution of Industrial Engineering, MUMBAI, Vol. XXXI, No. 11, 2002, pp. 26-29.

20. R.Subramanian and V.Selladurai, “Performance improvement behavior of a small scale

enterprises”, Journal of Industrial Engineering, Indian Institution of Industrial Engineering, Vol. XXX No. 10, 2001, pp. 24-33.

21. R.Sivasubramanian, V.Selladurai and N.Rajam Ramaswamy, “Drum-Buffer-Rope (DBR) Approach

and its effect on the Performance of Synchronous Manufacturing System (SMS)” Journal of Industrial Engineering, Indian Institution of Industrial Engineering, Vol. XXIX, No. 6, 2000, pp. 18-23.

22. V.Selladurai, P.Aravindan and R.Parthasarathi, “Manufacturing lead time reduction through

stabilized sequence planning system,” Technology Journal of PSG Tech, 1994, pp. 31-35. 23. V.Selladurai, P.Aravindan, K.Thirumaran and T.Govindaraj, “The importance of Entrepreneurial

Technology Programme in Technical education”, Technology Journal of PSG TECH, 1993, pp. 28-31.

24. V.Selladurai and P.Aravindan, “Dynamic Analysis of Industrial System through Computer

Simulation”, Technology Journal of PSG TECH, 1992, pp. 23-37. 25. P.Aravindan and V.Selladurai, “Analysis of queuing delay in data transmission in production

systems as per MAP”, OPSEARCH, Journal by ORSI, Mar 1992, Vol. 29, No. 1, pp. 34-35. CONFERENCE PROCEEDINGS 1. N.Murugan and V.Selladurai, “Productivity Improvement in Manufacturing Submersible pump

diffuser housing using Lean Manufacturing System”, 24th National Convention of Production

Engineers, Institutions of Engineers (India) Thrissur Center, May 15-16, 2009.

24

2. P.V.Senthiil and V.Selladurai, “Information technologies for knowledge management: their usage and effectiveness”, International Conference in Business Management and Information Sciences, November 5-7, 2008, Naresuan University, Phitsanulok, Thailand.

3. P.V.Senthiil and V.Selladurai, “Customer based production system sequence planning with

simulation modeling”, International Conference in Business Management and Information Sciences, November 5-7, 2008 Naresuan University, Phitsanulok, Thailand.

4. M.Murugan and V.Selladurai, “Art cell formation using modified single linkage clustering

approach in cellular manufacturing”, International Conference ISCO-2008, Karpagam College Engineering, Coimbatore.

5. M.Murugan and V.Selladurai, “Integrated ART-MOD-SLC approach for solving part family/cell

formation problem in cellular manufacturing – Comparative study”. International Conference ISCO-2008, Karpagam College Engineering, Coimbatore.

6. S.Narmadha, G.Sathish and V.Selladurai, “Extraction of Views and Perspectives to Develop an

Framework for Enterprise Modeling”, International Conference on Total Engineering, Analysis and Manufacturing Technologies, Indian Institute of Science (IISc), Bangalore, India, September 22 – 24, 2008.

7. V. Selladurai, P.V.Senthiil and G.Balamurugan, “Proto type development of involute impeller

pump casing with optimization”, International Conference on Digital Factory (ICDF-2008), Coimbatore Institute of Technology, Coimbatore, August 11 - 13, 2008, Vol.II, p. 1438.

8. S.Narmadha, V.Selladurai and G.Sathish “Data Mining in aspect of Manufacturing Enterprise - A

Review”, International Conference on Total Engineering, Analysis and Manufacturing Technologies, Indian Institute of Science (IISc), Bangalore, India, October 4 - 6, 2007, p. 43.

9. S.Narmadha, V.Selladurai, Vignesh.G and Vishwanath Shankar, “Intelligent Support Tools

Enhancing Decision Making”, International Conference on Total Engineering, Analysis & Manufacturing Technologies, Indian Institute of Science (IISc), Bangalore, India, October 4 - 6, 2007, p. 44.

10. K.Mani and V.Selladurai, “Simulation studies on vapour compression refrigeration system using

LPG as eco-friendly refrigerants”, Proceedings of the International Conference on Modelling and Simulation (CITICOMS 2007), Coimbatore Institute of Technology, Coimbatore, August 27 - 29, 2007, Vol. II, p.30.

11. K.Raja, R.Sathishkumar, N.A.Prabu and V.Selladurai, “An evolutionary Algorithm for unrelated

parallel machine scheduling”, Proceedings of the International Conference on Modelling and Simulation (CITICOMS 2007), Coimbatore Institute of Technology, Coimbatore, August 27 - 29, 2007, Vol. II, p.45.

12. S.Kumaravadivelan, S.P.Arul, and V.Selladurai, “Modeling and Analysis of 3DSMA Stent”

21st AIMTDR – All India Manufacturing Technology, Design and Research Conference, Vellore

Institute of Technology, Vellore, July 2006. 13. G.Sasikumar, V.Selladurai and K.Thirunavukkarasu, “Application of Analytic Hierarchy Process

in Supplier Selection: An Automobile Industry Case Study”, International Conference on Global Manufacturing Innovations – GMI 2006, Coimbatore Institute of Technology, Coimbatore, India, July 27-29, 2006.

14. M.Murugan, R.Sivaprakasam and V.Selladurai, „Scheduling N jobs M machines machine shop

using Ant Colony Optimization‟. National Conference OPTEST – 2006, Bannari Amman Institute of Technology, Sathyamangalam.

25

15. M.Murugan, R.Sivaprakasam and V.Selladurai, “Cell formation with Reduction in setup Time through Genetic Algorithm”, National Conference AQMENT-2006, Erode Sengunthar Engineering College, Erode.

16. M.Murugan, R.Sivaprakasam and V.Selladurai, “Performance Measure of Cells through Genetic

Algorithm”, International National Conference CARFOF-06 held at Vellore Institute of Technology, Vellore.

17. K.Mani and V.Selladurai, “Refrigerants and their impacts on Environment”, Proceedings of the

International Interdisciplinary Conference on sustainable Technologies for Environmental Protection (ICSTEP 2006) – Probing the boundaries, Coimbatore Institute of Technology, India Jointly with University of Toledo, Ohia, USA, January 7-9, 2006, p.112.

18. K.Elangovan, V.Selladurai, S.R.Devadasan and S.Muthu, “Executive Support System for

Strategic Maintenance Quality Engineering Programme: An Experimental Model”, International conference on Emerging Technologies in Intelligent System and Control (EISCO-2005), Kumaraguru College of Technology, Coimbatore, January 5-7, 2005, pp. 747-752.

19. K.U.Kameshwaran, S.P.Arul, C.Venkatesh and V.Selladurai, “Implicit Modeling of Shape

Memory behavior using Artificial Neural Network”, Accepted for 12th

National convention of Electro Chemist, Society for Advancement of Electro-Chemical Science and Technology (SAEST) Thiagaraja College Of Engineering, Madurai, February 18-19, 2005.

20. S.P.Arul, K.Saravanan and V.Selladurai, “Study on Thermo Mechanical Behavior of Shape

Memory Alloy”, Accepted for 12th National Convention of Electro Chemist, Society for

Advancement of Electro-Chemical Science And Technology (SAEST), Thiagaraja College of Engineering, Madurai, February 18-19, 2005.

21. C.Arumugam, V.Selladurai, K.M.Senthil Kumar, S.A.Kumar and K.Elangovan, “Innovative

quality in Agile manufacturing environment through QFD”, National conference on Innovated Total Quality Management (ITQM 2005), PSG College of Technology, Coimbatore, during February 25-26, 2005, pp. 51-52.

22. C.Arumugam, V.Selladurai, K.M.Senthil Kumar, S.A.Kumar and K.Elangovan, “Innovative Quality

through Data Integration in Agile Manufacturing”, National conference on Innovated Total Quality Management (ITQM 2005), PSG College of Technology, Coimbatore, February 25-26, 2005, pp. 51-52.

23. K.Elangovan, V.Selladurai, S.R.Devadasan, and S.Muthu, “Design and Development of ESS for

Strategic Maintenance Quality Engineering Programme”, National conference on Latest trends in Mechanical Engineering in Department of Mechanical Engineering (NCLTME-2005), Dr. Mahalingam College of Engineering and Technology, Pollachi, April 1-2, 2005.

24. K.Balamurugan, V.Selladurai and B.Ilamathi, “A Genetic Algorithm Approach to facility layout

problem”, 3rd

International Conference on Manufacturing Research Incorporating the 21st

National NCMR, ICMR 2005, Cranefield University, September 6-8, 2005. 25. K.Elangovan, V.Selladurai, S.R.Devadasan, and S.Muthu, “Strategic Maintenance Quality

Engineering through PROESEP”, Twenty first National Convention of Mechanical Engineers and National Seminar on Strategies for new product development, Department of Mechanical Engineering of PSG College of Technology, Coimbatore, September 9 -10, 2005.

26. C.Aurumugam, V.Selladurai, K.M.Senthil Kumar and K.Elangovan, “Agile Manufacturing

Environment through QFD – A Case Study”, International Conference on Advances in Materials, Product Design and Manufacturing Systems (ICMPM 2005), Department of Mechanical

26

Engineering of Bannarai Amman Institute of Technology, Sathyamangalam, December 12-14, 2005.

27. C.Arumugam, V.Selladurai, K.M.Senthil Kumar and K.Elangovan, “Quality through data

Integration in Agile Manufacturing in pump industry”, International Conference on Advances in Materials, Product Design and Manufacturing Systems (ICMPM 2005), Department of Mechanical Engineering of Bannarai Amman Institute of Technology, Sathyamangalam, December 12-14, 2005.

28. K.Elangovan, V.Selladurai, S.R.Devadasan and S.Muthu, “Quality in Infrastructure Maintenance

through Executive Support”, International Conference on Operations Research Applications in Infrastructure Development (ICORAID-2005-ORSI), December 27-29, 2005.

29. K.Raja, R.Radhakrishnan and V.Selladurai, “Optimization of Machine Scheduling – A Fuzzy

Logic Approach‟, National Conference on Product Development with Mechatronic Systems for Global Quality, Thiagarajar College of Engineering, Madurai, during May 2 – 3, 2005.

30. K.Mani and V.Selladurai, “Hydrocarbon refrigerants as substitute for CFCs, HCFCs and HFCs”,

Proceedings of the National Conference on Latest Trends in Mechanical Engineering, Dr.Mahalingam College of Engineering and Technology, Pollachi, India, April 1-2, 2005, pp. 83 – 85.

31. K.Mani and V.Selladurai, “Ozone depleting substances and their alternative refrigerants”,

Proceedings of the National Conference on Globally Competitive Eco-friendly Technologies in Mechanical and Mechatronics Engineering (GETME-2005), Kongu Engineering College, Erode, India, April 15-16, 2005, pp. A33-A35.

32. K.Mani and V.Selladurai, “Ozone safe and climate friendly refrigerants in refrigeration and air-

conditioning systems”, Proceedings of the National Conference on Frontiers in Environmental Sciences and Engineering‟, Bharathiar University, Coimbatore, India, September 15-17, 2005, p.61.

33. G.Sasikumar, K.Thirunavukkarasu and V.Selladurai, “Production Management by Theory of

Constraints”, International Conference on Responsive Supply Chain Management (RSC-2004), January 5-7, 2004, Coimbatore Institute of Technology, Coimbatore -641 014.

34. K. Rajkumar, S.P.Arul and V.Selladurai, “Constitutive modeling of SMA using Neural Network”,

International Conference on Responsive Supply Chain Management (RSC-2004), January 5-7, 2004, Coimbatore Institute of Technology, Coimbatore - 641 014.

35. P.Manimaran, V.Selladurai and G.Sasikumar, “A Genetic Algorithm for Multi-commodity, Multi-

Echelon, Multi-Stage Logistics Supply Chain Network”, International Conference on Responsive Supply Chain Management (RSC-2004), January 5-7, 2004, Coimbatore Institute of Technology, Coimbatore - 641 014.

36. R.Rahul Jain, K.Raja and V.Selladurai, “Cyclic Scheduling for a Re-Entrant Job Shop Industry”,

International Conference on Responsive Supply Chain Management (RSC-2004), January 5-7, 2004, Coimbatore Institute of Technology, Coimbatore - 641 014.

37. T.Alwarsamy, P.Thangavel, R.Balasubramanian and V.Selladurai, “Investigation of Dynamic

Behavior of Cutting Tool Using FEM Model”, International Conference on Responsive Supply Chain Management (RSC-2004), January 5-7, 2004, Coimbatore Institute of Technology, Coimbatore - 641 014.

27

38. R.Kannan, V.Selladurai and SM.Kannan, “Analysis of Clearance Variation in Selective Assembly”, International Conference on Responsive Supply Chain Management (RSC-2004), January 5-7, 2004, Coimbatore Institute of Technology, Coimbatore - 641 014.

39. B.Ganesh Babu, V.Selladurai and P.Thangavel, “Simulation of Regenerative Force and Dynamic

Deflection Model of End Milling Process”, Proceedings of the National Conference on Modeling and Analysis of Production Systems (MAPS 2004), 22-23 January 2004, National Institute of Technology, Thiruchirappalli – 620 015, pp. 232-236.

40. P.Thangavel, T.Alwarsamy and V.Selladurai, “A Simple Approach for Feed Cutting Force

Estimation in Turning using Current Measurement”, National Conference on Recent Advance in Manufacturing Engineering (RAIME04), January 30-31, 2004, National Engineering College, Kovilpatti-628 503.

41. S.Kumaravadivelan, S.P.Arul and V. Selladurai, “Modelling and analysis of Shape memory

Alloys 3D Stent using FEM”, National Conference on emerging trends in Engineering and Technology, May 1-3, 2004, Dr. MGR College of Engg. and Technology, Chennai.

42. T. Babusenthil kumar, S.P. Arul and V. Selladurai, “Design Reliability and Quality Assurance of

Hydraulically Operated Cryo-Arms Swing control mechanism in GSLV Rocket”, National Conference on emerging trends in Engineering and Technology, May 1-3, 2004, Dr. MGR College of Engg. and Technology Chennai.

43. D.Vasudevan, V.Selladurai and P.Nagaraj, “A Closed form solution to single Sampling Attribute

plans indexed by AQL,LQL and AOQL”, National Conference on Challenges in Achieving Global Quality, CAGQ, Department of Mechanical Engineering, Thiagarajar College of Engineering, Madurai, May 25-25, 2004, pp.49-52

44. S.Arivandan, K.Raja, S.Bhaskar, V.Selladurai, “Bi-Criterion Scheduling Model in Manufacturing

Systems”, National Conference on Environmentally Conscious Design and Manufacturing –Issues and Challenges (ECDM 2004), Kumuraguru College of Technology Coimbatore - 641 006, July 23-24, 2004,

45. P.Manimaran, V.Selladurai, V.Parthiban and G.Sasikumar, “A Genetic Algorithm for Optimisation of Production – Distribution System in Supply Chains”, Second International Conference on Logistics and Supply Chain Management (ILSCM 2004), PSG College of Technology, Coimbatore - 641 004, August 3-5, 2004,

46. K.Raja, V.Selladurai, S.Aravindan, A.Rajesh and R.Sudhakaran, “Performance Improvement

Through Genetic Algorithm based Parallel Machine Scheduling” XXXXVI National Convention on Quality Management in the 21

st Century, Indian Institution of Industrial Engineering, Trivandrum -

695 016, September 24-26, 2004. 47. K.Elangovan, V.Selladurai, S.R.Devadasan and S.Muthu, “Executive Support System for SMQE

programme: A Prototype Model” XXXXVI National Convention on Quality Management in the 21st

Century, Indian Institution of Industrial Engineering, Trivandrum - 695 016, September 24-26, 2004.

48. D.Vasudvan and V.Selladurai, “Determination of Sampling Plans using ANN Version”,

International Conference and Exhibition on Total Engineering, Analysis and Manufacturing Technologies (TEAM TECH 2004), Indian Institute of Science, Bangalore, November 2-4, 2004.

49. K.Elangovan, V.Selladurai, S.R.Devadasan and S.Muthu, “Executive Support System for

Strategic Maintenance Quality Engineering Programme: A Prototype Version”, International Conference and Exhibition on Total Engineering, Analysis and Manufacturing Technologies (TEAM TECH 2004), Indian Institute of Science, Bangalore, November 2-4, 2004.

28

50. P.Manimaran, V.Selladurai and V.Parthiban, “A Simulated annealing methodology for multi-stage logistics in Supply Chain Network”, International Conference on Manufacturing and Management (GCMM-2004), Vellore Institute of Technology, Vellore –632 014, December 8-10, 2004.

51. K.Rajkumar, S.P.Arul and V.Selladurai, “Constitutive Modeling of SMA using Neural Network”,

International conference on Responsive Supply Chain Management-RSC-2004, January 5-7, 2004.

52. T.Babusenthil kumar, S.P.Arul and V.Selladurai, “Design Reliability & Quality Assurance of

Hydraulically Operated Cryo-Arms Swing Control Mechanism in GSLV Rocket”, National Conference on Emerging Trends in Engg. & Technology, Dr.MGR College of Engg. and Technology, Chennai, May 1 - 3

, 2004.

53. S.Kumaravadivelan, S.P.Arul and V.Selladurai, “Modelling and Analysis of Shape Memory Alloys

3D Stent using FEM”, National Conference on Emerging Trends in Engg. and Technology, Dr.MGR College of Engg. & Technology, Chennai, May 1-3, 2004.

54. P.Thangavel, V.Selladurai and T.Alwarsamy, “A Simple approach for feed cutting force

estimation in turning using current measurement”, Proc. of the National Conference on Recent Advance in Manufacturing Engineering, National Engineering College, Kovilpatti, India, 2004.

55. K.Raja, S.Aravindan and V.Selladurai, “Bi-Criterion Scheduling Model in Manufacturing

Systems‟, National Conference on Enviromentally Conscious Design and Manufacturing, at Kumaraguru College of Technology, Coimbatore, July 23 – 24, 2004.

56. K.Raja, S.Aravindan and V.Selladurai, “Performance Improvement through Genetic Algorithm

based Parallel Machine Scheduling‟, XXXXVI IIIE National Conference, Trivandrum, September 24 -26, 2004.

57. P.Senthil Velmurugan and V.Selladurai, “Ant Colony Optimization for Job Shop Scheduling”

International Conference on Digital Aided Modelling and Simulation (DAMS 2003), Coimbatore Institute of Technology, Coimbatore, January 6-8, 2003.

58. B.Ganesh Babu and V.Selladurai, “Statistical Design of Experiments for Measuring the Cutting

Forces in End Milling”, Proceedings of National Conference on Quality Engineering and Management (NCQE 2003), January 3-4, 2003, pp. 8-12.

59. P.Palanisamy, C.Sasi Kumar, S.Shanmugasundaram and V.Selladurai, “Analysis of Flow

Induced Vibration using CFD”, International Conference on Digital Aided Modelling and Simulation (DAMS 2003) - An Evolutionary Approach for Optimization, Coimbatore Institute of Technology, Coimbatore - 641 014, January 6-8, 2003. Paper No. 90.

60. B.Ganesh Babu and V.Selladurai, “Development of Algorithm and Simulation for Cutting Forces

Face and End Milling Operations on AI – 7075, “International Conference on Digital Aided Modelling and Simulation (DAMS 2003) - An Evolutionary Approach for Optimization, Coimbatore Institute of Technology, Coimbatore - 641 014, January 6-8, 2003, Paper No. 93.

61. P.Senthil Velmurugan and V.Selladurai, “Ant Colony Optimization for Job Shop Scheduling”,

International Conference on Digital Aided Modelling and Simulation (DAMS 2003) - An Evolutionary Approach for Optimization, Coimbatore Institute of Technology, Coimbatore - 641 014. January 6-8, 2003, Paper No. 95.

62. V.Senthil, S.R.Devadasan and V.Selladurai, “Digital Devices for Reengineering product quality

design”, International Conference on Digital Aided Modelling and Simulation (DAMS 2003) - An Evolutionary Approach for Optimization, Coimbatore Institute of Technology, Coimbatore -641 014, January 6-8, 2003, Paper No. 96.

29

63. S.P.Arul, T.S.Kulandaisamy and V.Selladurai, “Thermo Mechanical Modelling of Shape Memory Alloys,” International Conference on Digital Aided Modelling and Simulation (DAMS 2003) - An Evolutionary Approach for Optimization, Coimbatore Institute of Technology, Coimbatore - 641 014, January 6-8, 2003, Paper No. 98.

64. S.Rajakumar, V.P.Arunachalam and V.Selladurai, “Performance Measurement in Parallel

Machine Scheduling”, International Conference on Digital Aided Modelling and Simulation (DAMS 2003) - An Evolutionary Approach for Optimization, Coimbatore Institute of Technology, Coimbatore - 641 014, January 6-8, 2003, Paper No111.

65. D.Vasudevan and V.Selladurai, “Controlling Lot Tolerance Percent Defectives (LTPD) in

Acceptance Sampling Plans using ANN”, International Conference on Digital Aided Modelling and Simulation (DAMS 2003) - An Evolutionary Approach for Optimization, Coimbatore Institute of Technology, Coimbatore - 641 014, January 6-8, 2003, Paper No. 156.

66. C.Arumugam, R.Sivasubramanian and V.Selladurai, “Application of Synchronous Manufacturing

Concepts for Improved Profitability”, International Conference on Digital Aided Modelling and Simulation (DAMS 2003) - An Evolutionary Approach for Optimization, Coimbatore Institute of Technology, Coimbatore - 641 014, January 6-8, 2003, Paper No. 106.

67. P.Thangavel, V.Selladurai and T.Alwarsamy, “Optimization of Manufacturing Process for

Maximizing Tool Life”, National Conference on Emerging Trends in Engineering, Technology and Management, Adhiyamaan Engineering College, Hosur - 635 109, September 8-9, 2003,

68. K.Raja, P.Sathyabalan, V.R.Sivakumar and V.Selladurai, “Parallel Machine scheduling”,

Proceedings of the 2nd

National Conference on Computer Integrated Design and Manufacturing, Amrita Institute of Technology, Coimbatore 641 105, November 28-29, 2003.

69. G.Sasikumar, K.Thirunavukkarasu, V.Selladurai, “Dynamic Modeling for Reengineering Supply

Chain”, Sixth International Conference of the Association of Asia Pacific Operational Research Societies within IFORS (APORS 2003), December 8-11, 2003, New Delhi.

70. G.Sasikumar, K.Thirunavukkarasu and V.Selladurai, “Product and Process Design Strategic for

Effective Supply Chain Management”, Sixth International Conference of the Association of Asia Pacific Operational Research Societies within IFORS (APORS 2003), New Delhi, December 8-11, 2003.

71. S.P.Arul, N.Anbuchezhian and V.Selladurai, “Major Approaches in Design Optimization”,

International Conference on Digital Aided Modelling and Simulation (DAMS 2003) - An Evolutionary Approach for Optimization, Coimbatore Institute of Technology, Coimbatore - 641 014, January 6 -8, 2003.

72. P.Thangavel, V.Selladurai and T.Alwarsamy, “Optimization of machining process for maximizing

tool life”, Proc. of the National Conference on Emerging Trends in Engineering Technology and Management, Adhiyamaan Engineering College, Hosur, India, 2003.

73. K.Raja, P.Sathyabalan and V.Selladurai, “Parallel Machine Scheduling”, in the National

Conference on Computer Integrated Design and Manufacturing”, Amrita Institute of Technology, Coimbatore, November 28-29, 2003.

74. G.Sasikumar, V.Selladurai and K.Thirunavukkarasu, “Dynamic Modeling for Reengineering

Supply Chains”, Sixth International Conference of the association of Asia Pacific Operational Research Societies – APORS 2003, Operational Research Society of India, New Delhi, India, December 8-10, 2003.

30

75. G.Sasikumar, V.Selladurai and K.Thirunavukkarasu, “Product and Process Design Strategies for Effective Supply Chain Management”, Sixth International Conference of the association of Asia Pacific Operational Research Societies – APORS 2003, Operational Research Society of India, New Delhi, India, December 8 – 10, 2003.

76. G.Sasikumar, V.Selladurai and C.Sasikumar, “Co-ordinated Supply Chain Design”, National

Conference on World Class Manufacturing – WCM 2003, Amrita Institute of Technology, Coimbatore, India, May 7 – 9, 2003.

77. P.Senthil Velmurugan and V.Selladurai, “ANT Colony Optimization for Job Shop Scheduling”,

International Conference on Operational Research for Development and National Development, Anna University, Chennai, December 27-30, 2002.

78. P.Senthil Velmurugan and V.Selladurai, “Parameter Evaluation of Ant Colony Optimization for

Job Shop Scheduling” International Conference on Operations Research for Development, (ICORD 2002), Anna University, Chennai, Operational Research Society of India, Chennai and Bangalore Chapters, December 27-30, 2002.

79. S.P.Arul, T.S.kulandaisamy and V.Selladurai, “The Thermo Mechanical Response of Shape

Memory Wire (NITINOL) – Constitutive Modeling, Finite Element Implementation and Numerical Simulation”, ISSS SPIE 2002, International Conference on Smart Materials, Structures and Systems, IISC Bangalore, December 12-14, 2002, pp. 868-873.

80. P.V.Senthiil and V.Selladurai, “Computer Based Parallel Machine typical Jobshop scheduling”

Proceedings of the 12th ISME Conference on Challenges in product and process design and

development in the information ERA, Crescent Engineering College, Chennai, January 10 - 12, 2001, pp. 440-446.

81. P.V.Senthiil and V.Selladurai, “Parallel Machine Performance Measure Optimization using

Genetic Algorithm for a Job Shop”, Proceedings of the National Conference on Computer Integrated Design and Manufacturing (NCCIDM), Amrita Institute of Technology and Science, Coimbatore-05, May 14-15, 2001, pp. 385-390.

82. P.V.Senthiil and V.Selladurai, ”Simulation Systems of High Tech Manufacturing and Result code

Generation with Animation Snapshot Modeling”, Proceedings of the National Conference on Computer Integrated Design & Manufacturing (NCCIDM), Amrita Institute of Technology and Science, Coimbatore – 641 005, May 14-15, 2001, pp. 254-260.

83. P.V.Senthiil and V.Selladurai, “Quality approach linked computer based job shop scheduling with

job sequence improvisation”, Proceedings of the Conference on Reliability analysis and Engineering (NSRAE2001), Institute of Armament Technology (DRDO), Pune, June 14–15, 2001.

84. P.V.Senthiil and V.Selladurai, “Flexible workshop; about the concept of flexibility”, Proceedings

of the International conference on Logistics and Supply Chain Management in association with Michigan University, USA, PSG College of Technology, Coimbatore, August 6-8, 2001.

85. P.V.Senthiil and V.Selladurai, “Supply chain management with parallel machines shop floor

environment of job shops”, Proceedings of the International Conference on Logistics and Supply Chain Management in association with Michigan University, USA, PSG College of Technology, Coimbatore, August 6-8, 2001.

86. P.V.Senthiil and V.Selladurai, “Multiple attribute schedule selection a fuzzy logic based

algorithm” Proceedings of the International Conference on Industrial Mathematics, IIT Madras, Chennai, August 12-14, 2001.

31

87. P.Senthil Velmurugan and V.Selladurai, “Job Shop Scheduling: A Research Perspective”, International Conference on Optimization Techniques and its Applications in Engineering and Technology, September 22-23, 2001.

88. P.Senthil Velmurugan and V.Selladurai, “Optimization – Inspiration from social behavior”,

Proceedings of the Thirty Fourth Convention of ORSI – International Conference on Operational Research and National Development, December 27-29, 2001, pp. 189 -191.

89. P.Senthil Velmurugan and V.Selladurai, “Optimization – Inspiration from social insect behavior”

International Conference on Operational Research and National Development, Operational Research Society of India, Calcutta Chapter-700019, December 27-29, 2001.

90. V.Senthil, S.R.Devadasan, P.A.Mohammed Regims and V.Selladurai, “BPR Enabled Quality

Information System”, Proceedings of the International Symposium on Management and Quality, Amirtha Institute of Management, Coimbatore, January 2-3, 2000.

91. P.Nagaraj and V.Selladurai, “Function approximation of total system cost for a continuous

manufacturing system – a case study”, Proceedings of the International Conference on Intelligent Flexible Autonomous Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore, January 10-12, 2000, pp. 103-107.

92. V.Senthil, S.R.Devadasan, B.Sampathkumar and V.Selladurai, “BPR enabled Quality Circle

Programme”, Proceedings of the International Conference on Intelligent Flexible Autonomous Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore, January 10-12, 2000, pp. 142-146.

93. R.Subramanian and V.Selladurai, “Re-Engineering Similar Process industry through material

codification”, Proceedings of the International Conference on Intelligent Flexible Autonomous Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore, January 10-12, 2000. pp. 147-154.

94. N.Anbuchezhian, S.P.Arul and V.Selladurai, “A survey of major approaches for design

optimization”, Proceedings of the International Conference on Intelligent Flexible Autonomous Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore, January 10-12, 2000. pp. 229-234.

95. R.Rajesh, R.Rangarajan and V.Selladurai, “Computational Fluid Dynamics – A Role in heating

ventilation air conditioning and refrigeration”, Proceedings of the International Conference on Intelligent Flexible Autonomous Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore, January 10-12, 2000, pp. 290-297.

96. S.PerezhilVendan, V.Selladurai, R.Rudramoorthy, S.Dhandapani and S.R.Devadasan, “Design

of Humidification system and optimization of locations for the diffusers in a textile plant using FEM”, Proceedings of the International Conference on Intelligent Flexible Autonomous Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore, January 10-12, 2000. pp. 311- 316.

97. R.Rajesh, R.Rangarajan and V.Selladurai, “Applications of Computational Fluid Dynamics - a

Survey”, Proceedings of the International Conference on Intelligent Flexible Autonomous Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore, January 10-12, 2000. pp. 334-342.

98. P.V.Senthil and V.Selladurai, "Pipe Line Processing (PLP) of jobs to achieve optimal

performance measures with varied number of jobs/operation stage bound PMS system input combinations”, Proceedings of the International Conference on Intelligent Flexible Autonomous

32

Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore, January 10-12, 2000. pp. 761-767.

99. R.Sivasubramanian and V.Selladurai, “Elimination of bottleneck resources through Drum-Buffer-

Rope (DBR) approach in a synchronous manufacturing system”, Proceedings of the International Conference on Intelligent Flexible Autonomous Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore, January 10-12, 2000, pp. 849-855.

100. R.Sivasubramanian and V.Selladurai, “Application of Principles and Methodologies of

Synchronous Manufacturing in Marketing and Production – A Case Study”, Proceedings of the Third International Stimulating Manufacturing Excellence in Small and Medium Enterprises Conference, Coventry University, United Kingdom, April 17-19, 2000, pp. 377 – 387.

101. Pl.K.Palaniappan, V.Selladurai and N.Jawahar, “Capacity Planning of Flexible Assembly Line”,

National Seminar on Optimization Techniques in Manufacturing Practice - 2000, Department of Mechanical Engineering, Kumaraguru College of Technology, Coimbatore - 600 006, sponsored by CII – Coimbatore Chapter, 18

th March 2000.

102. V.Senthil, S.R.Devadasan and V.Selladurai, “A Literature Survey on TQM and BPR Integration

using Anbar Electronic Intelligence CD-ROM”, International Conference on Production Research Special ICPR 2000 – Facing the challenge in the new Millennium at Bangkok, Thailand, August 2-4, 2000.

103. V.Selladurai, C.Arumugam and R.Sivasubramanian, “Profit maximization through Synchronous

Manufacturing Principle”, Proceedings of 42nd

National Convention of Indian Institution of Industrial Engineering on Globalization and WTO Role of Industrial Engineering, Organized by Coimbatore Chapter, September 29 - 30, 2000, pp. 103 -109.

104. V.Senthil, S.R.Devadasan and V.Selladurai, “Facing the challenges of WTO by improving quality

in product design through BPR”, Proceedings of the 42nd

National Convention of Indian Institution of Industrial Engineering on Globalization and WTO Role of Industrial Engineering, IIE Coimbatore Chapter, September 29 - 30, 2000, pp. 115 - 120.

105. P.V.Senthiil and V.Selladurai, “Non Pre-emptive Parallel Machine Scheduling Algorithm for a Job

Shop with computer based approach” Proceedings of the OR-2000 XXXIII annual convention of the Operational Research Society of India, IIM, Ahmedabad, December 14-16, 2000, pp. 86-95.

106. P.V.Senthiil and V.Selladurai, “An Efficient Algorithm to develop MPM based PMS subject to due

dates”, Proceedings of the 42nd

National Convention of Indian Institution of Industrial Engineering on Globalisation and WTO Role of Industrial Engineering, IIIE Coimbatore Chapter, September 29 - 30, 2000.

107. V.Senthil, S.R.Devadasan and V.Selladurai, “Software for BPR Enabled Taguchi‟s offline control

method”, International Conference on Quality, Reliability and Information Technology at the tune of the Millennium (ICQRIT 2000), Indian National Science Academy, New Delhi, December 21-23, 2000.

108. P.V.Senthiil and V.Selladurai, “Computer Based shop scheduling using NPPMS techniques”

Proceedings of the International Conference on Quality, Reliability and Information Technology at the turn of the Millennium, Indian National Science Academy, New Delhi, December 21-23, 2000, pp. (QR122-129).

109. V.Senthil, S.R.Devadasan and V.Selladurai, “Quality in Product Design through BPR”,

International Conference on Quality, Reliability and Information Technology at the turn of the Millennium, Indian National Science Academy, New Delhi, December 21-23, 2000.

33

110. P.V Senthiil, V.Selladurai and N.Rajam Ramasamy, “A Knowledge Based Simulation Model for Job shop Scheduling” Proceedings of the Operations Management Conference - 4, Indian Institute of Technology, Chennai, December 22-24, 2000, pp. 100-105.

111. R.Sivasubramanian, V.Selladurai and N.Rajam Ramasamy, “Scheduling Bottleneck Resources

in a Dynamic Job Shop”, Proceedings of the Operations Management Conference - 4, Indian Institute of Technology, Chennai, December 22-24, 2000, pp. 106-111.

112. S.R.Devadasan, M.Ramesh, V.Senthil and V.Selladurai, “Reengineering ISO 9002 Quality

System Model”, Proceedings of the National Seminar on Manufacturing Technology for 21st

Century and Reorganization of Engineering Education, Government Engineering College, Trichur, 19-20, March, 1999.

113. S.R.Devadasan, B.Sampathkumar, V.Senthil and V.Selladurai, “BPR Integrated Quality Circle

Programme”, Proceedings of the Conference on Information Technology for Management Science Applications, ORSI, Bangalore Chapter, July 27 - 28, 1999.

114. S.R.Devadasan, M.Ramesh, V.Senthil and V.Selladurai, “Quality improvement through

Reengineered Quality Systems”, Proceedings of the National Conference on Quality Engineering in Aerospace Technologies, Center for Military Airworthiness and certification (CEMILAC) Bangalore, August 20 - 21, 1999, Vol.1.C1-5.

115. R.Sivasubramanian, V.Selladurai and N.Rajam Ramaswamy, “The Cost/Throughput Analysis on

the performance of a Synchronous Manufacturing System” Proceedings of the National Conference on Agile Engineering, Birla Institute of Technology, Ranchi, October 4-5, 1999.

116. R.Sivasubramanian, V.Selladurai and N.Rajam Ramaswamy, “The Cost/Throughput Analysis on

the performance of a Synchronous Manufacturing System”, Proceedings of the International Seminar on Manufacturing Technology Beyond 2000, Bangalore, November 17-19,1999, pp. 320-325.

117. V.Senthil, S.R.Devadasan, B.Sampathkumar and V.Selladurai “Re-engineering Quality Circle

Programme”, Proceedings of the International Seminar on Manufacturing Technology Beyond 2000, Bangalore, November 17-19,1999, pp. 450 -455.

118. V.Senthil, S.R.Devadasan, P.A.Mohammed Regims and V.Selladurai, “Quality Improvement

through BPR Integrated Quality Information System”, Proceedings of the National seminar on Reliability Analysis and Engineering (NSRAE - 99), VSSC, Trivandrum, December 15 -16, 1999.

119. V.Senthil, S.R.Devadasan, P.A.Mohammed Regims and V.Selladurai, “BPR Integration in

Quality System through IT”, Proceedings of the IIIE-XXXXI National convention on IE, IT system integration in the New Millennium, IIIE, Visakapatnam, December 17-18, 1999.

120. P.V Senthiil and V.Selladurai, “Knowledge based PMS methodology”, Proceedings of the

National Conference on Industrial Engineering towards 21stcentury, Mechanical Department,

Tirupathi Venkateswara University, January 19-20, 1998, pp. 41-48. 121. N.Rajam Ramasamy, R.Sivasubramanian and V.Selladurai, “Study of just in time technique for

developing country: a survey”, 21st National systems conference NSE- at DRDL Hyderabad,

January 23 - 24, 1998, pp. 431-435. 122. K.Rajesh, N.Rajam Ramasamy, R.Sivasubramanian, V.Selladurai and N.Rangaraj, “Job

scheduling using Genetic Algorithm”, First Two day Conference on Intelligent Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore-641 014, February 6-7,1998, pp. J.6.1. – J.6.8.

34

123. V.Karthik, R.Sivasubramanian and V.Selladurai, “Analysis of Synchronous Manufacturing System using Simulation”, First Two day Conference on Intelligent Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore – 641 014, February 6-7, 1998, pp. L7.1. – L7.8.

124. K.Rajesh, R.Sivasubramanian, V.Selladurai, "Application of theory of constraints (TOC) to the

manufacturing systems," First Two day National Conference on Intelligent Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore-641 014, February 6-7, 1998, pp. N.5. 1 –N.5.6.

125. P.V.Senthiil and V.Selladurai, “Parallel Machine Scheduling (PMS) to minimize Expected Mean

Flow Time (MFT)”, First Two day National Conference on Intelligent Manufacturing Systems, Coimbatore Institute of Technology, Coimbatore, February 6 -7, 1998, pp. E.2.1 –E.2.6.

126. P.Nagaraj and V.Selladurai, “Study of two stage Manufacturing Inventory systems with finished

product Inventory”, Proceedings of the International Conference on Operational Research for a better tomorrow (ICORBT‟ 98), Delhi Chapter of ORSI, New Delhi, December 24 -26, 1998.

127. P.Nagaraj and V.Selladurai, “The Dynamic Lot-sizing Problem for Multi-stage, Multi-Facility

Manufacturing Inventory System”, CAD/CAM, Robotics and Factories of Future, PSG College of Technology, Coimbatore -641004, December 1-3, 1998, pp. 600 – 606.

128. S.R.Devadasan, M.Ramesh, V.Senthil and V.Selladurai, “Reengineering Quality Systems

through Information Technology”, Proceedings of the International Conference on Operational Research for a better tomorrow (ICORBT‟ 98), Delhi Chapter of ORSI, New Delhi, December 1-3, 1998, pp. 600 - 606.

129. V.Selladurai, R.Sivasubramanian, N.Rajam Ramasamy and K.Chandrasekeran, "Simulation and

Modelling of Manufacturing Systems for higher throughput", National seminar on Emerging Trends in manufacturing Processes, NIFFT, Ranchi, November 1997, pp. T11.1 - T11.5.

130. V.Selladurai, R.Sivasubramanian, N.RajamRamasamy and K.Chandrasekaran, "Study of just in

time technique to improve throughput of manufacturing systems", National seminar on Emerging Trends in manufacturing Processes, NIFFT, Ranchi, November 1997, pp. T12.1 - T12.5.

131. R.Sivasubramanian, N.Rajamramaswamy, V.Selladurai, "An analysis of FMS in batch

production", Proceedings of International Conference on, CAD/CAM Automation, Robotics and Factories of Future, Jamia Millia Islamia, New Delhi, December 1996, pp. 174 - 179.

132. N.Rajam Ramasamy, V.Selladurai, R.Natarajan and P.K.Muthusamy, "Modelling and Simulation

of a simple factory to study the complex behaviour", Proceedings of International Conference on, CAD/CAM Automation, Robotics and Factories of Future, Jamia Millia Islamia, New Delhi, December 1996, pp. 752 - 763.

133. S.Sakthivel, V.Selladurai, R.Natarajan and T.V.Moorthy, "Dynamics analysis for the design of

Robot", Proceedings of International Conference on CAD/CAM Automation, Robotics and Factories of Future, Jamia Millia Islamia, New Delhi, December 1996, pp. 206 - 213.

134. P.Aravindan, S.R.Devadasan and V.Selladurai, "Quality Information System: an imperative for

infusing quality in materials" Proceedings of the International Conference on Materials Management and Inventory Control sponsored by The International Society for Inventory Research (ISIR), Dr.G.R.Damodaran College of Science, Coimbatore, January 3 - 7, 1994.

135. P.Aravindan, S.R.Devadasan and V.Selladurai, “Excellence in quality management of materials

through quality function development" Proceedings of the International Conference on Materials Management and Inventory Control sponsored by The International Society for Inventory Research (ISIR), Dr.G.R.Damodaran College of Science, Coimbatore, January 3 - 7, 1994.

35

136. P.Aravindan, S.R.Devadasan and V.Selladurai, “Online quality control of materials through quality function development" Proceedings of the International Conference on Materials Management and Inventory Control sponsored by The International Society for Inventory Research (ISIR), Dr.G.R.Damodaran College of Science, Coimbatore, January 3 - 7, 1994.

137. R.Manivel, V.Selladurai and R.Natarajan, “An Expert system for trouble diagnosis of

reciprocating refrigerant compressors”, First National Conference on Fluid Machinery, Bombay, February 10 - 11, 1994.

138. P.Aravindan, S.R.Devadasan and V.Selladurai, "Quality system for continuous improvement of

personnel quality: The Imperative in Modern Manufacturing Technology", Proceedings of the International Conference on Modern Industrial Training (CMIT), Honkong Polytechnic, China, October 1994.

139. V.Selladurai, P.Aravindan, P.K.Muthusamy and Muralikrishna, "Development of Scheduling

software for FMC with automatic setup equipment using dynamic programming", International Conference on Stochastic models, Optimization Techniques and Computer Applications, PSG College of Technology, Coimbatore - 641 004, December 15-17, 1994, pp. 373 - 384.

140. V.Selladurai and P.Aravindan, “Dynamics analysis of industrial systems to improve productivity

through computer simulation - an Industrials Dynamics Approach", Proceedings of the XVI National systems Conference, Anna University, Madras, February 17 - 19, 1993, pp. 33 - 38.

141. V.Selladurai and P.Aravindan, “The Impact of Industrial and technology policy of India on

Industrial growth and technological progress”, Proceedings of VII Indian Engineering Congress, Bangalore, February 1993, pp. 15-24.

142. V.Selladurai, P.Aravindan and R.Satheesan, “Discrete event simulation of FMS for optimal

scheduling through interactive animation”, Proceedings of VIII - ISME Conference, IIT, New Delhi, March 5 - 6, 1993, pp. 577-582.

143. V.Selladurai and P.Aravindan, “Industrial Capacity Planning through dynamic simulation for

higher productivity an Industrial Approach”, Proceedings of the V National Conference on System Dynamics, IIT, New Delhi, March 19-21, 1993, pp. 219-229.

144. V.Selladurai, P.Aravindan and R.Satheesan, “Interactive Computer Graphics simulation for

scheduling FMS”, VIII National Convention of Production Engineers, Mothilal Nehru Regional Engineering, Allahabad, July, 1993.

145. V.Selladurai, P.Aravindan and R.Parthasarathi, “Design of a stabilized sequence planning

system using computer simulation”, VIII National Convention of Production Engineers, Mothilal Nehru Regional Engineering, Allahabad, July, 1993.

146. P.Aravindan, S.R.Devadasan and V.Selladurai, “Towards excellence of quality through Taguchi

Methods”, Proceedings of the 35th National Convention of Indian Institution on Industrial

Engineering, Hyderabad, October 1993. 147. V.Selladurai, P.Aravindan and R.Satheesan, “Dynamic scheduling of FMS through computer

Simulation and Interactive Graphics”, International Conference on CAD/CAM, Robotics and Autonomous Factories, IIT, New Delhi, December 1993, Vol. III, pp. 61 - 68.

148. V.Selladurai, P.Aravindan and R.Parthasarathi, “Development of a computer software for

planning stabilized sequence to operations in batch processing", International Conference on CAD/CAM, Robotics and Autonomous Factories, IIT, New Delhi, December 1993, Vol. III, pp. 259 - 267.

36

149. P.Aravindan, S.R.Devadasan, E.Narasimha Reddy and V.Selladurai, “An Expert system for Planning to implement successful Quality Circle Programme”, Proceedings of the International Conference On CAD/CAM, Robotics And Autonomous Factories, IIT, New Delhi, December 1993, Vol. II, pp. 537 - 546.

150. V.Selladurai, P.Aravindan and R.Satheesan, “Discrete event simulation of intelligent

manufacturing system (IMS) for optimal scheduling through interactive animation" International Computing Congress, Hyderabad, December 15-18, 1993, pp. 333 - 340.

151. V.Selladurai, P.Aravindan and R.Natarajan, “Manufacturing Capacity assessment through

Computer Simulation for Batch Production”, Proceedings of National Symposium on Optimization Techniques and Applications, Thiagarajar College of Engineering, Madurai, July 2- 3, 1992, pp. 252 – 261.

152. P.Aravindan, S.R.Devadasan and V.Selladurai, “An Expert System for Failure Diagnosis of

Quality Circle Programs”, Proceedings of 34th National Convention of Indian Institute of Industrial

Engineering, Pune, October 8 - 10, 1992. 153. P.Aravindan, S.R.Devadasan and V.Selladurai, “Implementation of ISO 9000 Quality system an

immediate task of Industrial Engineering" Proceedings of 34th National Convention of Indian

Institute of Industrial Engineering, Pune, October 8 - 10, 1992. 154. P.Aravindan, S.R.Devadasan and V.Selladurai, “Failure Mode and Effects Analysis Powerful

Tool for Quality Planning" Proceedings of 34th National Convention of Indian Institute of Industrial

Engineering, Pune, October 8 - 10, 1992. 155. P.Aravindan and V.Selladurai, “The Institutional Responsibilities in Technical Education for

Human Resource Development”, Proceedings of the ISTE National Seminar at REC, Trichy, October 26 - 27, 1992.

156. V.Selladurai, P.Aravidan, B.Rajesh and S.V.Varma, “Dynamics Analysis of Manufacturing

Systems to improve Industrial productivity through Computer simulation", Proceedings of the International conference on Design Automation and CIM, PSG Tech, Coimbatore, jointly with Rochester Institute of Technology, NewYork, USA, January, 1991, pp. 101-108.

157. L.Sreenivasan and V.Selladurai, “Computer Aided Design of Portable Pneumatic Drilling

Machine using Auto LISP", proceedings of the international conference on Design Automation and CIM, PSG College of Technology, Coimbatore, jointly with Rochester Institute of Technology, Newyork, USA, January, 1991.

158. V.Selladurai, P.Aravindan, S.Muthu and K.Meher Srinivas, “Dynamics Analysis of Aggregate

Planning and Scheduling in Batch Production using ICG”, Proceedings of XXIV Annual convention of ORSI, Bangalore, December 26 - 28, 1991, Paper No.8.

159. P.Aravindan, V.Selladurai and S.C.Muthukumaran, “Design and Development of a low cost Rig

for load testing of industrial gear reducers”, Proceedings of VI National Convention of Mechanical Engineers, Bangalore Institution of Engineer (India), October 25 - 27, 1990, pp. 198 to 207.

160. P.Aravindan and V.Selladurai, “Productivity increase in industrial process through wastivity”,

Proceedings of the National Management Seminar, Calicut University, December 6 - 8, 1990. 161. V.Selladurai, P.Aravindan and G.Kumar, “Dynamic Analysis of Production System”, Proceedings

of the IV National Conference on Systems Dynamics,(SDSI), SVU College of Engineering, Tirupathi, December 14 - 16, 1990, pp. 104 - 107.

37

COURSES ATTENDED 1. QIP winter short-term course on Microprocessor Applications – 30 November to 11 December,

1987, IIT, Bombay. 2. ISTE Summer School on Computer Aided Manufacturing (CAM) And Robotics – 22.05.1988 to

04.06.1988, Department of Mechanical Engineering, College of Engineering, ANNA UNIVERSITY, Chennai – 600 025.

3. Ministry of Science and Technology, Government of India sponsored training programme on

Entrepreneurship Development – 29 May to 10 June, 1989, Indian Institute of Management, Bangalore.

4. ISTE Summer School on Advances in Production Tooling and Manufacturing Technology - June 7 -

20, 1989, Department of Mechanical Engineering, PSG College of Technology, Coimbatore - 641 004.

5. ISTE Winter School on Productivity Management – December 4 - 15, 1989 Centre for Management

Studies, IIT, New Delhi. 6. ISTE Summer School Programme on Recent Developments in Factory Automation Technology –

June 3 -16, 1990, PSG College of Technology, Coimbatore – 641 004. 7. ISTE sponsored short-term course on Robots in Manufacturing – 20 May – 1 June, 1991,

Manufacturing Engineering Section, Department of Mechanical Engineering, IIT, Chennai. 8. ISTE sponsored summer school on Computer Integrated Manufacturing – June 7 – 20, 1992,

Department of Mechanical Engineering, PSG College of Technology, Coimbatore. 9. ISTE sponsored summer school on Recent Advances in Manufacturing Systems Engineering and

Total Quality Management - June 6 - 19, 1993, Department of Mechanical and Production Engineering, PSG College of Technology, Coimbatore.

10. Workshop on Concepts and Applications of Computational Fluid Dynamics – May 15 - 19, 2000,

Amrita Institute of Technology, Coimbatore. CONFERENCES / SEMINAR ATTENDED 1. VI National Convention of Mechanical Engineers, Bangalore, Institution of Engineer (India), October

1990. 2. National Management Seminar, Calicut University, Calicut, December 6 - 8, 1990. 3. IV National Conference on Systems Dynamics,(SDSI), SVU College of Engineering, Tirupathi,

December 14 - 16, 1990. 4. International Conference on Design Automation and Computer Integrated Manufacturing,

PSG College of Technology, Coimbatore, 1991. 5. National Seminar on Newer Manufacturing Technique for higher productivity, National Institute of

Engineering, Mysore, November, 23, 1991. 6. National Symposium on Optimization Techniques and Applications, Thiagarajar College of

Engineering, Madurai, July 2- 3, 1992. 7. XVI National Systems Conference (NSC‟ 92), February 17-19, 1993, College of Engineering, Anna

University, Chennai.

38

8. 8th ISME Conference on Mechanical Engineering, March 5 - 6, March 1993, IIT, New Delhi.

9. International Conference on CAD/CAM, Robotics and Autonomous Factories, IIT, New Delhi,

December 16 -19, 1993. 10. International Conference on Materials Management and Inventory Control Sponsored by the

International Society for Inventory Research (ISIR), January 3 - 7, 1994, Dr.G.R.Damodaran College of science, Coimbatore.

11. International Conference on Stochastic models, optimization techniques and computer applications,

PSG College of technology, Coimbatore, December 15 - 17, 1994. 12. UGC Workshop on Examination Reforms and Evaluation, November 23 - 25, 1995, PSG College of

Arts and Science, Coimbatore. 13. International Conference on Bio-Medical Engineering, 15

th Conference of Bio-Medical Society of

India, Coimbatore Institute of Technology, Coimbatore, December 12 - 14, 1996. 14. AICTE sponsored National Seminar on Autonomous Working of Engineering Colleges, PSG

College of Technology, Coimbatore, December 19 - 20, 1996. 15. ISTE Tamil Nadu and Pondicherry Section First Annual convention - 01.08.1998, Kongu

Engineering College, Perundurai. 16. 14

th International Conference on CAD/CAM, Robotics & Factories of the Future - November 30

th to

3rd

December 1998, PSG College of Technology, Coimbatore 17. Workshop on Process Modelling Application for Steel Industries, September 8 - 10, 1999, IISc,

Bangalore. 18. CSM - CAE 2000 Conference on Trends and Technologies in Engineering Simulation – November

8 - 10, 2000, organized by CSM Software Private Ltd., Bangalore in association with MSC Software Corporation, USA and Computational Dynamics, UK.

19. National Conference on Computer Integrated Design & Manufacturing (NCCIDM), Amrita Institute

of Technology and Science, Coimbatore, May 14 - 15, 2001. 20. International Conference in Business Management and Information Sciences, ICBMIS 2008,

Naresuan University, Phitsanulok, Thailand, November 5 - 7, 2008. 21. 24

th National Convention of Production Engineers, Institutions of Engineers (India) Thrissur Center,

May 15 -16, 2009.

(Dr. V. SELLADURAI)

Documents

RESUME - Coimbatore Institute of Technology...1 RESUME Name : Dr. V. SELLADURAI M.E, Ph.D. Date of Birth : 16.05.1958 Professor V.Selladurai, Principal, CIT, obtained his Ph.D. in