PRUDHVI REDDY VEMIREDDY https://www.linkedin.com/in/prudhvireddyvemireddy [email protected] Ph. No:(360)-6853897 EDUCATION : • University at Buffalo, The State University of New York, Master of Science in Electrical Engineering, (GPA:3.25/4) Dec 2017 • Jawaharlal Nehru Technological University, Hyderabad, Bachelor of Technology, Electrical Engineering, (GPA:3.91/4) May 2016 WORK EXPERIENCE : Tata Consultancy Services System Engineer Intern Dec 2015 – Apr 2016 • Developed and created a random channel for the UE (cell phone) to connect or register to the Network Server for RACH (Random Access Channel) Implementation, which covered both Contention Based and Non-Contention based RACH. Procter & Gamble(P&G) Virtual Marketing Intern Jun 2015 – Jul 2015 • Worked in Ambi Pur Division and endorsed a Product into Market using Social Media as a tool in online marketing. ACADEMIC PROJECTS : PROTOCOL DEVELOPMENT IN WIRELESS NETWORKS Oct 2016 – Dec 2016 • Implemented collision detection, variable propagation delay and acknowledgement timeout in wireless networks. • Simulation is done in using ns3 by creating a generic wireless network and then implementing them into it. ERROR PERFORMANCE EVALUATION OF DIGITAL MODULATION SCHEMES Oct 2016 – Dec 2016 • Conducted error performance analysis of Binary PAM, 4-PAM and 4-QAM modulation schemes by plotting SER in SNR. IRIS PATTERN RECOGNITION USING DOUGHMAN’S ALGORITHM Oct 2016 – Dec 2016 • Iris recognition for enhanced security in Biometrics implemented by using MMU Iris Database and IIT Delhi Iris Database. PCB DESIGN AND FABRICATION BY USING PCB PLOTTER Dec 2015 – Apr 2016 • Designed and fabricated PCB using PCB Plotter by converting into PCB Layout. • Modelled a 2 axis graph plotter using laser to cut the copper-clad for PCB. CLOSED LOOP SPEED CONTROL OF DC BRUSHLESS MOTOR USING PID CONTROLLER Jan 2015 – Apr 2015 • Created a GUI, which shows the real time curve of the speed of the motor, voltage and current. • Arduino Board was used as DAQ Board which got values from the GUI and controlled the Brushless motor.

resume

Download DOCX Report

Upload
prudhvi-reddy
View
10
Download
0

Embed Size (px)

Citation preview

PRUDHVI REDDY VEMIREDDYhttps://www.linkedin.com/in/prudhvireddyvemireddy

[email protected]. No:(360)-6853897

EDUCATION: • University at Buffalo, The State University of New York, Master of Science in Electrical Engineering, (GPA:3.25/4) Dec 2017• Jawaharlal Nehru Technological University, Hyderabad, Bachelor of Technology, Electrical Engineering, (GPA:3.91/4) May 2016

WORK EXPERIENCE: Tata Consultancy Services System Engineer Intern Dec 2015 – Apr 2016

• Developed and created a random channel for the UE (cell phone) to connect or register to the Network Server for RACH (Random Access Channel) Implementation, which covered both Contention Based and Non-Contention based RACH.

Procter & Gamble(P&G)Virtual Marketing Intern Jun 2015 – Jul 2015

• Worked in Ambi Pur Division and endorsed a Product into Market using Social Media as a tool in online marketing. ACADEMIC PROJECTS:

PROTOCOL DEVELOPMENT IN WIRELESS NETWORKS Oct 2016 – Dec 2016 • Implemented collision detection, variable propagation delay and acknowledgement timeout in wireless networks.• Simulation is done in using ns3 by creating a generic wireless network and then implementing them into it.

ERROR PERFORMANCE EVALUATION OF DIGITAL MODULATION SCHEMES Oct 2016 – Dec 2016

• Conducted error performance analysis of Binary PAM, 4-PAM and 4-QAM modulation schemes by plotting SER in SNR.IRIS PATTERN RECOGNITION USING DOUGHMAN’S ALGORITHM Oct 2016 – Dec 2016

• Iris recognition for enhanced security in Biometrics implemented by using MMU Iris Database and IIT Delhi Iris Database.PCB DESIGN AND FABRICATION BY USING PCB PLOTTER Dec 2015 – Apr 2016

• Designed and fabricated PCB using PCB Plotter by converting into PCB Layout.• Modelled a 2 axis graph plotter using laser to cut the copper-clad for PCB.

CLOSED LOOP SPEED CONTROL OF DC BRUSHLESS MOTOR USING PID CONTROLLER Jan 2015 – Apr 2015

• Created a GUI, which shows the real time curve of the speed of the motor, voltage and current.• Arduino Board was used as DAQ Board which got values from the GUI and controlled the Brushless motor.

DESIGN OF 440V 3-PHASE HALF WAVE CONTROLLED THYRISTOR DRIVE Sep 2014 – Dec 2014

• Designed a 440V 3 Phase Half-Wave Controlled Thyristor drive using TYN616 and the characteristics of the drive are studied under all load conditions by connecting a 440V DC Motor to drive.

• The Drive is controlled by using NI DAQ Board and data acquisition toolbox in LabVIEW.

TECHNICAL SKILLS: EDA Tools: Matlab, LabVIEW, DIP trace and NS3.Wireless Technologies: 3G, Wi-Fi, Bluetooth.Networking Technologies: IP, P2P, TCP, UDP.Programming languages: C, C++, Python, Processing.Software: Multisim, Ultiboard, Arduino, MATLAB, SketchUP 3D and LabVIEW.Hardware Tools: ICs, Arduino, Micro controller 8051, ESP8266, PLC’s, ZigBee, ATMega32, Sensors, 3D Printing and PCBs.

ACTIVITIES: • Worked as a chief advisor in GSC (Google Student Community) and conducted workshops on android Sep 2014 – Aug 2015• Secured Second Prize in Google App Design Competition “Appenning” at Google Hyderabad. • Worked as a core committee member for “Scientific Forestep”, a technical fest. Feb 2014 – Apr 2016

mailto:[email protected]

https://www.linkedin.com/in/prudhvireddyvemireddy

• Conducted events and classes under ISTE GRIET as a Tech Lead for EEE dept. Apr 2014 – Feb 2016• Worked as an Event Manager for TIMES NIE” think and learn” Quiz competition.• Presented a paper on “Energy Kite” in Technozion 2k13, a technical Fest in NIT Warangal.