8
Mohamed Farouk Ali Saleh Mobile:- +971-55-1081949 / +971-50-2454467 E-mail:- [email protected] Attn: The Concerned Manager / Director Dear Sir, I would like to introduce myself as a candidate for a post in your Engineering Department in your esteemed organization. I’m confident; given an opportunity I assure you I can execute my duties to your entire satisfaction. The role that I am expected to play has to build trust through sincerity, knowledge through learning and pride through leadership. I am positive that the combination of my keen enthusiasm and sunny disposition shall render me as an asset to your organization. I enclose my Resume herewith for your kind perusal and favorable response at your earliest and request for the favor for an interview. Thanking you in anticipation. Yours sincerely, Mohamed Farouk Ali Mob: 055-1081949 Enclosed:- CV ( 7 pages)

Resume

Embed Size (px)

Citation preview

Page 1: Resume

Mohamed Farouk Ali Saleh

Mobile:- +971-55-1081949 / +971-50-2454467

E-mail:- [email protected]

Attn: The Concerned Manager / Director

Dear Sir,

I would like to introduce myself as a candidate for a post in your Engineering Department

in your esteemed organization. I’m confident; given an opportunity I assure you I can

execute my duties to your entire satisfaction.

The role that I am expected to play has to build trust through sincerity, knowledge through

learning and pride through leadership. I am positive that the combination of my keen

enthusiasm and sunny disposition shall render me as an asset to your organization.

I enclose my Resume herewith for your kind perusal and favorable response at your earliest

and request for the favor for an interview.

Thanking you in anticipation.

Yours sincerely,

Mohamed Farouk Ali

Mob: 055-1081949

Enclosed:- CV ( 7 pages)

Page 2: Resume

CURRICULUM VITAE

Mohamed Farouk Ali Saleh

Mobile No.: +971-55-1081949 / +971-50-2454467

E-mail: [email protected]

• Qualified Operation Engineer – Field Service Engineer - Commissioning & start-Up Engineer

and Planning & Performance Engineer.

• A highly motivated professional with a strong commitment to safety, presentation and

quality of work.

• Experienced in many aspects of mechanical engineering, primarily in the power generation

industry with a solid 7 years of experience.

• Predominantly experienced on Siemens Gas Turbines, Steam Turbines & Generators. My

roles have seen me progress through apprentice Operation Engineer, Commissioning & now

Planning & Performance Engineer.

1. Company\Organization : DEWA (Dubai Electricity & Water Authority) Designation: 1- Planning & Performance Engineer 2- Senior Operation Engineer Location: Dubai, U.A.E

Duration: January 2011 - Till Date

JOB RESPONSIBILITIES / KEY PERFORMANCE AREAS

Planning & Performance Engineer (May-2012 Till Now)

• DEWA Integrated Management System Manual & Procedures.

• To collect, monitor & analyze KPI data and prepare monthly, quarterly & annual

KPI report in time. To release uncorrected & corrected monthly KPI reports by

2nd & 4th week of next month.

Career Objective

Employment Record

Page 3: Resume

• Fuel budget preparation & procurement.

• Expected Fuel Surcharge for 2013 for various demand scenarios was calculated.

• Available Natural gas supply.

• Estimate total fuel for power & water in MMBTU.

• Estimation of (NG & LNG) shortfall.

• Computation of liquid fuel (MFO & DFO) requirement to meet Gas shortfall.

• Computation of DFO to be burnt in Dubal & DEWA.

• Unit commitment.

• Liquid Fuel Stock status.

• Import/Export of Power & Water.

• To arrange resources and monitor EMS System performance and review and

issue all EMS related reports to all concerned stakeholders as per IMS Policy.

• Monitor and maintain daily fuel stock as per the fuel management strategy.

• Incorporate the comments received from various departments.

• Plant Performance Management.

• Maximized reliability

Emergency response services & start-up services.

• Improved thermal performance

Increased output, improved heat rate, reduced emissions & Performance

monitoring and troubleshooting.

Senior Operation Engineer (Jan-2011 Till May-2012)

Plant Description:

G-Station 2460MW

5x 135 Mw (Siemens 94.2) Gas Turbine.

5x 340 Ton/hr Main WHRB.

4x 340 Ton/hr Auxiliary Boiler.

2x 70 Mw (Ansaldo) Back Pressure Steam Turbine.

9x 7.5 MIGD MSF (WEIR WESTGRATH/UK) desalination units, @ sea water

temperature 30-40 °C and 105 °C TBT.

9x 2.7 MIG RO (ITT/USA) desalination Units.

Job Description

Preparation units for startup and Performing necessary checks before unit starts, checking auxiliaries (Pumps, fans, air and fuel gas compressors).

Monitoring units during operation and Maintain continuous synchronization and safely shutdown.

Observation unit and it's auxiliaries during operation and Supervising local operators to insure solving any appearing problems.

Analyzing local periodic readings for the unit operation characteristics which could indicate some coming problems before it takes place.

Page 4: Resume

Recording operation history during shift to be available whenever needed.

Raise work requests to maintenance departments through maximo.

Participation in the review of P&ID’s and control strategies in view of start-up and safe operation of process plants.

Verification that equipment and systems are mechanically complete.

Prevention of hazardous conditions for personnel and equipment.

2. Company\Organization : CMI (Cockerill Maintenance & Ingénierie) Designation: Commissioning & Operation Engineer Location: Egypt Duration: March 2010 – December 2010

JOB RESPONSIBILITIES / KEY PERFORMANCE AREAS

Commissioning & Operation Engineer

Commissioning & Start-up of HRSG-Horizontal leading to a safe and stable operation of process plants.

Participation in the review of P&ID’s and control strategies in view of start-up and safe operation of process plants.

Maintain an individual work record and notebook.

Reviewing and commenting on operating manuals and start-up procedures.

Responsible for personal quality control.

Be involved in direct supervision of craft labor.

Use and supervise the use of precision measuring hand tools, hydraulic bolt stretchers, and other industrial tooling and equipment.

Performance and reliability tests.

On load and no load tests.

Operability of each part automatically and also manually.

Prevention of hazardous conditions for personnel and equipment.

Assisting the Plant Engineer with the training of the customer’s personnel in the operation of the plant.

Page 5: Resume

3. Company\Organization : MDEP Co. (Middle Delta Electricity Production Comapny)

Designation: Shift operation engineer in Talkha Power Plant.

Location: Egypt

Duration: November 2007 – May 2010

JOB RESPONSIBILITIES / KEY PERFORMANCE AREAS

Shift operation engineer Engineer

Plant Description:

2x250 MW Gas turbine SIEMENS Units model V94.3A, ALSTOM 250MW Steam

turbine, CMI HRSG & SKODA Utilities.

Job Description

1st Shift Engineer for Talkha 750 MW power station.

Participation in the review of P&ID’s and control strategies in view of start-up and safe operation of process plants.

Participate in construction, commissioning, steam blow, By-pass Operation and start-up of ALSTOM DKYZZ3-2N41C (250 MW) steam turbine and CMI HRSG.

Operation of SIEMENS V94.3A (2x250MW) gas turbine -Teleperm XP control system- and associated auxiliary through DCS.

Operation of ALSTOM DKYZZ3-2N41C (250 MW) Steam Turbine.

Monitoring the operation of a power generating unit to ensure reliable and efficient power generation.

Performing the unit startups and shutdowns per assigned targets.

Act as first response to emergency situations, take appropriate steps to stabilize the problem as much as possible while simultaneously informing the supervisor and other parties as indicated in the procedures to safeguard the system and possibly personnel , Perform daily routine check and Communicate with NCC to control the loads so as to face the Load Demand.

Trouble shooting, effective response to emergency conditions and compliance to safety procedures.

Diagnose and resolve day-to-day operational problems.

Operability of each part automatically and also manually.

Prevention of hazardous conditions for personnel and equipment.

Performance and reliability tests.

Raising defects for equipment & doing isolation and de isolation procedures according to the work permit.

Handling plant firefighting.

Perform high/medium voltage switching operations.

Page 6: Resume

Responsible for the daily troubleshooting status.

Controlling the MV switchgear operations. Deal with the dispatch in the HV operations unified grid functions. Observe unit operation during normal operation and lowering increasing loads. Take immediate action for up normal conditions or when there is malfunction of

automatic system that will affect the unit operation. Follow reading of most important physical quantities in control room in regular time

intervals. Prepare work area & equipment Isolation for maintenance dept. Prepare required routine maintenance work orders to maintenance dept. Follow up preventive maintenance system. Daily reports

power plant training Centre (PPTC) 2007

O Combined Cycle fundamentals and operation systems training.

Steam turbine training 2008

o Description and operation of steam turbine. ALSTOM

“for Talkha 750 MW Power Plant”

Job training courses & class room 2010

o Description and operation of combined cycle and HRSG design. CMI

Fire fighting systems 2010

o Description, operation and recommended maintenance of the systems.

Firex Middle East

BSc. In mechanical Power Engineering, Mechanical engineering,

Mansoura University, Egypt June-2007

Attended MSc, (Environmental Engineering, Management and Technology, Management

and Planning) – Not completed

Mansoura University, Egypt

IMS Internal Auditing, Integrated Management Systems November-2013

Bureau VERITAS, Dubai

IOSH, Safety Management, Excellent September-2013

HSE Council, Dubai

Project Management Professional August-2013

PMI, Zabeel Institute, Dubai

Lean Six Sigma Yellow Belt, Quality Management August-2012

Academic record

On Job Trainings

Page 7: Resume

Quality Management, Egypt

Art of Management, Management September-2012

Swiss Institute (E-Learning)

AutoCAD 2D August-2008

IBM, Egypt

Key Skills:-

Interpersonal skills - listening, negotiation, influencing & easy to

Adopt.

Strong skills - analysis, positioning, negotiation, formal agreements, Etc.

Have excellent oral communication skills & Dedicated and career-oriented.

Self-motivated, capable of working within a high pressure environment in order to

resolve complaints and issues arising from given job.

To remain calm under pressure and to be able to handle objections in a reasonable

and professional manner.

Good initiative, problem-solving and analytical skills - lateral and logical - results

& process-driven.

Technical / Computer Skills:-

Windows: Excellent.

MS Office: Word, PowerPoint, Excel & Outlook.

Internet Use: Excellent.

English, Arabic (Basic)

Date of Birth: 08-09-1985

Place of Birth: Mansoura, Egypt

Gender: Male

Religion, Caste: Muslim, Islam

Nationality: Egyptian

Marital Status: Married

Visa Status: Employment Visa

Driving License: Holding Valid U.A.E License

Skills & Knowledge

Languages Known

Personal Details

Page 8: Resume

Mr. Tareq Osman

DEWA Assistant Manager Operation

Dubai, U.A.E

Mob. : +971-55-7964796

Mr. Hassan Medhat

General Electric

Qatar

Mob. : +974-66773688

References