Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
If your respirator does not fit correctly, you are not protected.
Fit testing will ensure your respiratory programme meets the requirements of the AS/NZS Standards.
4
RESP
IRA
TORY
PR
OTE
CTI
ON
Don’t gamble with safety.
67
THE AUSTRALIAN AND NEW ZEALAND STANDARD 1715: 2009, SELECTION, USE AND MAINTENANCE OF RESPIRATORY PROTECTIVE EQUIPMENT (RPE), HAS GUIDELINES TO HELP WORKPLACES CHOOSE, USE, AND MAINTAIN RESPIRATORY PROTECTIVE EQUIPMENT (RPE) CORRECTLY.
To comply with AS/NZS 1715 you need to have a programme in place that covers the following:
1. APPOINTING A PROGRAMME ADMINISTRATOR
2. SELECTION OF RPE
3. MEDICAL SCREENING OF END USERS
4. TRAINING
5. ISSUE OF RPE
6. FITTING OF EQUIPMENT
7. RESPIRATORY TESTING
8. WEARING OF RPE
9. MAINTENANCE OF RPE
10. RECORD KEEPING
11. PROGRAMME EVALUATION
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
R E S P I R A T O R Y P R O T E C T I O N R E S P I R A T O R Y P R O T E C T I O NR
ES
PIR
AT
OR
Y P
RO
TE
CT
ION
68
RESPIRATORY GUIDELINES
Particulate respirators filter finely divided solid or liquid particles from the air. The wearer’s normal breathing action draws contaminated air through a filter that traps contaminant particles on impact, allowing only filtered air through to the user. A range of particulate filters are available, depending on the characteristics of the contaminant.
Gas/vapour filters Respiratory protection against gas or vapour contaminants make use of a filter that absorbs or reacts with the contaminant. They are classified according to the total capacity of the filter, NOT efficiency against a given contaminant, as follows:
Class AUS – Low absorption capacity.
AUS
Class 1 – Low to medium absorption capacity. Max gas/vapour concentration 1,000 ppm.
A1 B1 E1 K1 P1
Class P1 Filter – mechanically generated dusts, such as sanding, grinding, mining, etc. Particulate filter efficiency 80%.
P2Class P2 Filter – thermally and mechanically generated contaminants and metallic fumes, such as smelting or welding. Particulate filter efficiency 94%.
P3Class P3 Filter – high-efficiency filter when used with a full-face piece. Used when handling highly toxic dusts or powders, such as organophosphate insecticides and radionuclides. Particulate filter efficiency 99.95%.
1. PROGRAMME ADMINISTRATOR
As part of the establishment of a Respiratory Protection Programme where RPE is required to be worn the appointment of a programme administrator is now mandatory. The Administrator is responsible for completing the requirements stipulated in the guidelines and should have the full support of management.
2. SELECTION OF RPEWHEN SELECTING RPE IT IS IMPORTANT TO ENSURE THAT ONLY RPE COMPLYING TO AS/NZS 1716 BE USED.
RPE needs to be worn whenever the person is exposed to excessive levels of contaminant.
Factors for selection:
• Contaminant
• Task
• Operator
• Equipment limitations
• Special response HAZMAT incidents
A2 B2 E2 K2 Class 2 – Medium absorption capacity.
Max gas/vapour concentration 5,000 ppm.
AX – Low boiling point solvents ( <65˚C). Because of the nature of low boiling point solvents, this filter is one-use only and must be discarded after using.
AX
All staff that wear RPE should have an initial medical assessment prior to use.
The assessment should include:
PHYSIOLOGICAL CONSIDERATIONS There is a certain amount of effort required to breath through a negative pressure respirator. People with a history of cardiac or respiratory disorders should be medically assessed, especially where heavy work or prolonged wearing of RPE is needed.
Other factors could be as simple as facial hair breaking the seal on a close fitting mask.
PSYCHOLOGICAL CONSIDERATIONS Enclosed RPE like hoods, helmets or full face masks may give rise to feelings of claustrophobia, isolation and anxiety in some people.
3. MEDICAL ASSESSMENT OF RPE USERS
Combination filters Where both particulates and gas/vapour contaminants are present, dual-purpose filters can be used.
These are usually particulate filters or disposable respirators impregnated with an agent that reacts with vapours at low concentration and removes them. Alternatively, a particulate pre-filter may be used with a vapour filter to remove both types of contaminants.
P2
A1
Particulate filters
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
R E S P I R A T O R Y P R O T E C T I O N R E S P I R A T O R Y P R O T E C T I O N
RE
SP
IRA
TO
RY
PR
OT
EC
TIO
N
RESPIRATORY GUIDELINES CONTINUED
The AS/NZS 1715 S2(2.6) requires a suitable fit test to be carried out for all users of respirator protection equipment (RPE) with a close fitting facepiece, at least once a year. A quantitative respirator fit test guarantees precise evidence and documentation of results for each individual employee – in compliance with the AS/NZS Standards.
NZ SAFETY PROVIDES ON SITE RESPIRATORY TRAINING & FIT TESTING
4. TRAININGTRAINING NEEDS TO BE PROVIDED BY A COMPETENT PERSON.
The training should include:• Identification of the hazard• Reason for the RPE• RPE selection• Use and proper fitting of RPE• Wear time• Limitations of RPE• Maintenance and Storage• A summary of the respiratory protection
programme in the workplace
5. ISSUE OF RPEWhere practicable RPE shall be issued for a wearers exclusive use. Records documenting the issue of mask and consumables (filters etc.), and maintenance of the mask need to be established. Filters need to be marked with the date of issue and users ID. Non-personal RPE must be cleaned prior to re-issue.
6 & 7. FITTING AND TESTING OF RPE
All RPE that requires a close fitting facepiece to operate, has to be properly fitted to the wearer. Regular users of RPE require an annual fit test in accordance with the standards.
THERE ARE TWO TYPES OF FACIAL FIT TESTS – QUALITATIVE AND QUANTITATIVE.
• Qualitative tests are usually simple and fast but may be influenced by the wearer, and are subjective.
• Quantitative testing is not subjective but requires a trained operator. Full face respirators have to be tested with a quantitative test method to obtain the full protection factor.
8. WEARING OF RPEThe respiratory programme is there to ensure that RPE is worn correctly, fits correctly and is used when and where required.
9. MAINTENANCE OF RPE
MAINTENANCE OF RPE NEEDS TO BE CARRIED OUT TO THE MANUFACTURERS INSTRUCTIONS.
This includes:
• Cleaning and disinfection
• Inspection that equipment is in working order
• Repair and replacement of components (including replacement of filters)
• Storage and disposal RPE that isn’t properly maintained and cleaned can give the wearer a false sense of security and put their health at risk.
10. RECORD KEEPINGRecords for a respiratory programme should include details of:
ISSUE OF RPE • Date, identifying mark
USER RECORDS • Training, fit test, medical screening
MAINTENANCE • Filter replacement schedule • RPE maintenance schedule
PROGRAMME RECORDS • Procedures • Audits and evaluations • Atmospheric monitoring records • Health surveillance
11. PROGRAMME EVALUATION
The respiratory protection programme needs to be audited at least annually with adjustments made as appropriate to reflect the evaluation results.
69
IF YOUR RESPIRATOR DOES NOT FIT CORRECTLY, YOU ARE NOT PROTECTED!
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
RE
SP
IRA
TO
RY
PR
OT
EC
TIO
N
70
F U L L F A C E R E S P I R A T O RH A L F F A C E R E S P I R A T O R
7000 SERIES HALF MASK
CODE 407272 Small 407273 Medium 407274 Large
7000 SERIES HALF MASK
• Ultra- light weight with adjustable head cradle for comfort and a secure fit• only six parts for ease of cleaning and maintenance• Unique, optional ‘drop down’ feature• Uses the same filter range as the 9000 series full face mask
A C C E S S O R I E S
Adjustable head harness for a custom fit.
Compact, fits underwelding helmets.
Low profile, angled cartridge placementfor wider field of vision.
7000 SERIES HALF MASK
CONTOURED NECK BUCKLES FOR COMFORT AND QUICK ATTACHMENT.
ATTACHED EXHALE COVER FOR EASY INSPECTION.
7000 IN DROP DOWN MODE.
7000 SERIES HALF MASK SPARES
CODE 407283 Head harness assembly 407284 Diaphragm valve kit (20 inhale, 5 exhale) 407285 Gasket (each) 407626 Respirator wipes pack of 10 407627 Respirator wipes pack of 50 407628 Respirator wipes pack of 100 8020 Filter splash/spark guard
Keep respirator handy when not in use.
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
RE
SP
IRA
TO
RY
PR
OT
EC
TIO
N
71
F U L L F A C E R E S P I R A T O RH A L F F A C E R E S P I R A T O R
A C C E S S O R I E S
9000 SERIES FULL FACE MASK SPARES
CODE 407288 Replacement nose cup medium/large 407289 Replacement nose cup small 407290 Spectacle kit 407286 Head harness 407284 Diaphragm valves (20 inhale, 5 exhale) 407285 Gasket (each)
Stand away head harness for easy donning.
Over-moulded flange to lens. Eliminates heavy metal clamping frame for less weight and fewer parts.
Completely free of metal parts.
Panoramic lens with peripheralvision side panels.
Lens with scratch resistantCoating meets AS/NZS 1337for impact protection.Tear away lens protector.
OH&S new product of the year winnerThe exclusive over-moulded lens design eliminates the usual heavy clamping metal frame to create an innovative full face with lighter weight. Fewer parts, greater field of vision and minimal maintenance.
LEADING TECHNOLOGY
9000 SERIES FULL FACE
9000 SERIES FULL FACE MASK
Moldex 9000 provides premium features at an affordable price.• Ultra-light weight for comfortable fit• Only ten parts for easy maintenance• Provides excellent field of vision• Easy to don and doff• Uses the same filter range as 7000 series half mask
9000 SERIES FULL FACE MASK
CODE 407291 Small 407292 Medium 407293 Large
INTEGRATED EXHALE AREA WITH ATTACHED COVER. FEWER PARTS, SIMPLE MAINTENANCE AND INSPECTION.
LIGHTEST WEIGHT FACE-PIECE OF ANY POPULAR MODEL. WEIGHS LESS THAN 360 GRAMS.
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
RE
SP
IRA
TO
RY
PR
OT
EC
TIO
N
72
F I L T E R S R E S P I R A T O R K I T S
9000 SERIES FULL FACE MASK
CODE 407291 Small 407292 Medium 407293 Large
7000 SERIES HALF MASK
CODE 407272 Small 407273 Medium 407274 Large
PIGGY BACK RETAINER 7920
Used to combine the 7100A & 7600A gas cartridges with the 7940A particle filters.
CODE 407279
A C C E S S O R Y
MOLDEX FILTERS FOR 7000 & 9000 RESPIRATORS
P2 PRE-FILTER 8010 AND RETAINER
Used with the Pre-filter Retainer to add P2 level protection to gas cartridges. The retainer can be used with all cartridge and filter discs.
CODE 8910 P2 Pre-filters pack of 5 pairs 407276 Pre-filter Retainer
MULTI-GAS/VAPOUR SMART® CARTRIDGE - 7600A
Multi-gas: Organic vapours, (boiling point > 65˚c), inorganic and acid gases, ammonia and methylamine.
CODE 407278
ORGANIC VAPOUR CARTRIDGE - 7100A
A1 for organic gases and vapours with boiling point > 65˚c
CODE 407277
P2/P3 FILTER DISK WITH NUISANCE ORGANIC VAPOURS - 7960A
Same uses as 7940A P2/P3 filter disk plus an added carbon layer helps protect user from nuisance (below the exposure standard) levels of organic vapours. P2 when used with 7000P3 when used with 9000
CODE 407281
P2/P3 FILTER DISC - 7940A
Use as a stand alone filter or use with the 7920 Piggyback Adaptor with any Gas/Vapour Cartridge. P2 when used with 7000P3 when used with 9000
Applications: Welding, grinding, lime, metal machining, aluminum processing, bagging, brazing, buffing, cement work, dusty environments, foundries, metal working, mining, polishing, poultry, sanding, soldering, stone quarrying, sweeping, textiles, torch cutting, waste processing/recycling.
CODE 407280
P2/P3 CARTRIDGE - 7990A
P2 when used with 7000 P3 when used with 9000
Applications: For contaminants of substances include asbestos, lead, inorganic arsenic and cadmium. Also for use in environments where oil-based particulates are present.
CODE 407282
A1 P2/P3
P2/P3
P2/P3
B1A1 E1 K1
P2
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
RE
SP
IRA
TO
RY
PR
OT
EC
TIO
N
73
F I L T E R S R E S P I R A T O R K I T S
SPRAY RESPIRATOR KIT
Applications: Adhesives, degreasing, fibre glassing, pesticide spray, spray painting.
Kit Includes: 9000 Series Full Face Mask, A1 Organic Vapours Cartridge, P2 Pre-Filter, Pre-Filter Retainer, Respirator Wipes.
CODE 410927 Small 410928 Medium 410929 Large
FINE DUST RESPIRATOR KIT
Applications: Concrete and construction dust, foundry, glass wool, lead and metal fume.
Kit Includes: 9000 Series Full Face Mask, P2/P3 Filter Disc, Respirator Wipes.
CODE 410924 Small 410925 Medium 410926 Large
MULTI-GAS RESPIRATOR KIT
Applications: Organic and inorganic vapours, acid gases, ammonia, formaldehyde, hydrogen chloride, hydrogen fluoride, hydrogen sulphide (escape only), sulphur dioxide.
Kit Includes: 9000 Series Full Face Mask, Multi-Gas/Vapour smart cartridge, Respirator Wipes
CODE 410921 Small 410922 Medium 410923 Large
9000 SERIES - FULL FACE KITS
P2P3
SPRAYING RESPIRATOR KIT
Applications: Adhesives, degreasing, fibre glassing, pesticide spray, spray painting.
Kit Includes: 7000 Series Half Mask, A1 Organic Vapours Cartridge, P2 Pre-Filter, Pre-Filter Retainer, Respirator Wipes.
CODE 408989 Small 408990 Medium 408991 Large
FINE DUST RESPIRATOR KIT
Applications: Concrete and construction dust, foundry, glass wool, lead and metal fume.
Kit Includes: 7000 Series Half Mask, P2 Filter Disc, Respirator Wipes.
CODE 408986 Small 408987 Medium 408988 Large
WELDING RESPIRATOR KIT
Applications: Brazing, torch cutting and welding fume, dry pesticides, nuisance level organic vapours and ozone
Kit Includes: 7000 Series Half Mask, P2 Filter Disc Plus Nuisance Organic Vapours, Respirator Wipes.
CODE 408983 Small 408984 Medium 408985 Large
MULTI-GAS RESPIRATOR KIT
Applications: Organic and inorganic vapours, acid gases, ammonia, formaldehyde, hydrogen chloride, hydrogen fluoride, hydrogen sulphide (escape only), sulphur dioxide
Kit Includes: 7000 Series Half Mask, Multi-Gas / Vapour smart cartridge, Respirator Wipes.
CODE 408980 Small 408981 Medium 408982 Large
7000 SERIES - HALF MASK KITS
B1A1 E1 K1
B1A1 E1 K1
P2
P2 P2A1
Size matters• Even with the correct filters for the
job you still won’t be protected if your mask doesn’t fit
• Every face is shaped differently so the correct size mask must be selected for a better fit
• Moldex respirator kits are sold in S, M, L size masks
• You will find a mask sizing station in every NZ Safety branch that will enable the mask wearers to get the right fit
SIZE MATTERS
A1
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
RE
SP
IRA
TO
RY
PR
OT
EC
TIO
N
74
R E S P I R A T O R K I T SR E S P I R A T O R S
HALF FACE RESPIRATOR 6000 SERIES
• Simple and lightweight reusable respirator• Thermoplastic Elastomer (TPE) facepiece• Cradle head harness and easy to fasten
neck strap• Low profile and well balanced twin
cartridge and filter design• For use with 3M™ 2000, 5000 and 6000
series cartridges and filters (sold separately)• Complies with AS/NZS 1716:2012
CODE 116785 Small 6100 116688 Medium 6200 116793 Large 6300 116690 Drop-down mask Medium 116692 Drop-down mask Large
HALF FACE RESPIRATOR 7500 SERIES
• Soft silicone material for extra comfort and durability
• Proprietary 3M™ Cool Flow™ Exhalation valve and design minimises heat build-up and reduces fogging when wearing eye protection
• Low profile and well balanced twin cartridge and filter design
• For use with 3M™ 2000, 5000 and 6000 series cartridges and filters (sold separately)
• Complies with AS/NZS 1716:2012
CODE 7501 Small 7502 Medium 7503 Large
FULL FACE RESPIRATOR 6000 SERIES
• Lightweight and well balanced • Wide field of vision. Polycarbonate,
high impact visor• Proprietary 3M™ Cool Flow™
Exhalation valve provides low breathing resistance and minimises heat-build up in the respirator
• Low profile and well balanced twin cartridge and filter design
• For use with 3M™ 2000, 5000 and 6000 series cartridges and filters (sold separately)
• Complies with AS/NZS 1716:2012
CODE 116460 Small 6700 116463 Medium 6800 116465 Large 6900
A C C E S S O R I E S A C C E S S O R I E S A C C E S S O R I E S
HALF FACE RESPIRATOR SPARE PARTS - 6000
CODE 6893 Inhalation valve - White 6889 Exhalation valve - Blue 6895 Inhalation gasket - Orange 110266 Head harness
assembly 6281
HALF FACE RESPIRATOR SPARE PARTS - 7500
CODE 7582 Inhalation valve - Blue 7583 Exhalation valve - Blue 406561 Replacement head straps 7580 500479 Head harness
assembly 7581
FULL FACE RESPIRATOR SPARE PARTS - 6000
CODE 405541 Lens cover clear 6885 (pack of 25) 6893 Inhalation valve - White 7583 Exhalation valve - Blue 6895 Inhalation gasket - Orange 6896 Centre adaptor gasket 6897 Head harness assembly 6898 Lens assembly
6893 6889 7582 6893
6895
6896
7583 7583
405541
6898
406561
500479
6895
110266
6897
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
RE
SP
IRA
TO
RY
PR
OT
EC
TIO
N
75
R E S P I R A T O R K I T SR E S P I R A T O R S
SPRAYING RESPIRATOR KIT 6251, A1P2
Applications: Paint spraying, pesticide spraying, chemical handling, fibreglassing, printing, degreasing.
Kit Includes: 3M™ Half Face Respirator 6000 Series - Medium, 3M™ Organic Vapour Cartridges 6051, 1 pair of 3M™ Particulate Filters 5925 (P2), 3M™ Filter Retainers 501, 3M class 4 earplugs, respirator cleaning wipes and a respiratory protection guide.
CODE 406529
MULTI-GAS RESPIRATOR KIT 6259, A1B1E1K1P2
Applications: Range of vapours and gases including (but not limited to): chlorine, sulphur dioxide, solvents (boiling points >65˚c), hydrogen sulphide, ammonia, hydrogen chloride.
Kit Includes: 3M™ Half Face Respirator 6000 Series - Medium, 3M™ Multi-Gas Cartridges 6059, 1 pair of 3M™ Particulate Filters 5925 (P2), 3M™ Filter Retainers 501, 3M class 4 earplugs, respirator cleaning wipes and a respiratory protection guide.
CODE 406530
SPRAYING RESPIRATOR KIT 7551, A1P2
Includes 3M™ Half Face Reusable 7500 Series Respirator (medium) for extra comfort and durability.
Applications: Paint spraying, pesticide spraying, chemical handling, fibreglassing, printing, degreasing.
Kit Includes: 3M™Organic Vapour Cartridges 6051, 5 pairs of 3M™ Particulate Filters 5925 (P2), 3M™ Filter Retainers 501, 3M class 4 earplugs, respirator cleaning wipes and a respiratory protection guide.
CODE 406532
DUST/PARTICLE RESPIRATOR STARTER KIT 6225, P2
Applications: Sanding/sawing, lead paint removal, food manufacturing, insulation, drilling/cutting, masonry, grinding, powder coating.
Kit Includes: 3M™ Half Face Respirator 6000 Series - Medium, 3M™ P2 Dust/Mist Filters 2125, 3M class 4 earplugs, respirator cleaning wipes and a respiratory protection guide.
CODE 406266
ASBESTOS/DUST RESPIRATOR KITS
Applications: Suitable for certain asbestos work. Also for lead paint removal, sanding, sawing, drilling, cutting, grinding, masonry, insulation, (silica & beryllium - full face only).
Kit Includes: 3M Half or Full Face Respirator (S, M or L), 3M™ Particulate filters 6035 P2/P3* x 2 pair, 3M eyewear (7535 kit only), 3M class 4 earplugs and respirator cleaning wipes.
ASBESTOS/DUST KIT 7535 HALF FACECODE 411360 Small
411361 Medium 411362 Large
ASBESTOS/DUST KIT 6835 FULL FACE (PICTURED ABOVE)CODE 411363 Small
411364 Medium 411365 Large
* Higher P3 protection factors only achieved with a 3M Full Face Respirator.
WELDING RESPIRATOR KIT 7528, GP2
Includes 3M™ Half Face Reusable 7500 Series Respirator (medium) for extra comfort and durability.
Applications: Welding, soldering/brazing, grinding/polishing, drilling, metal pouring, machining.
Kit Includes: 3M™ GP2 Particle & Metal Fume Filters 2128, 3M class 5 earplugs, respirator cleaning wipes and a respiratory protection guide.
CODE 406531
B1A1 E1 K1 P2
A1 P2 A1 P2
P2
GP2
P2/P3*
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
RE
SP
IRA
TO
RY
PR
OT
EC
TIO
N
76
F I L T E R SF I L T E R S
FILTER, RETAINER & ADAPTOR
501 retainer holds the 5295 particulate filter onto the 6000 series cartridges.502 adaptor for attaching 2000 series filters with 6000 series cartridges.
CODE 404775 Filter retainer 501 404777 Filter adaptor 502
ORGANIC VAPOURS & TOXIC PARTICULATES CARTRIDGE 6098, AXP3
Low boiling point organic vapours (< 65˚C) and toxic particulates. Working with highly volatile solvents such as methanol, 1,3-butadiene or acetalehyde in chemical plants, composites manufacturing or coatings. Filter is single use only and must be worn with a 3M Full Face Respirator. Two pairs per box.
CODE 407942
AX P3
*Higher P3 protection factors only achieved with a 3M Full Face Respirator, otherwise P2 protection level when worn on a 3M Half Face Respirator
3M FILTERS FOR 6000 AND 7500 RESPIRATORS
ORGANIC VAPOUR CARTRIDGE 6051, A1
Organic vapours (boiling point > 65°C). For protection when cleaning with or using organic solvents e.g. toluene, xylene and Mek. Also degreasing, mixing, using paint thinners, lacquers and glues.
CODE 406265
A1
ORGANIC VAPOURS & FORMALDEHYDE CARTRIDGE 6075, A1FORM
Organic vapours (boiling point > 65°C) and formaldehyde. For protection when working with solvents and formaldehyde such as chemical processing, plastic production, fibreboard manufacturing, healthcare and laboratory work.
CODE 406262
FORMA1
ORGANIC VAPOURS & ACID GASES CARTRIDGE 6057, A1B1E1
Organic vapours (boiling point > 65˚C), inorganic and acid gases. For protection when working with organic vapours and/or acid gases, e.g. toulene, chlorine, sulphur dioxide and hydrochloric acid.
CODE 406264
B1A1 E1
MULTI-GAS CARTRIDGE 6059, A1B1E1K1
Multi-gas: Organic vapours, (boiling point >65˚C), inorganic and acid gases, ammonia and methylamine. For protection when working with a variety of chemicals, e.g. solvents, chlorine, hydrogen chloride, sulphur dioxide, hydrogen fluoride, hydrogen sulfide.
CODE 406261
B1A1 E1 K1
ORGANIC VAPOURS & MERCURY CARTRIDGE, 6096 - A1HgP3*
Organic vapours (boiling point > 65˚C), mercury vapours, and particulates. Oil and gas refining, pest control (low levels of phosphine) healthcare when removing amalgam, or wherever mercury vapours may exist.
CODE 406260
A1 Hg P3*
AMMONIA & METHYLAMINE CARTRIDGE 6054, K1
Ammonia and methylamine. For protection against ammonia and methylamine used in the manufacture of fertilisers, synthetic fibres, dyes and refrigerant manufacturing. Four pairs per box.
CODE 406263
K1
MULTI-GAS CARTRIDGE 6099, A2B2E2K2 P3
Class 2 multi-gas and particles: organic vapours (boiling point > 65°C), inorganic and acid gases, ammonia and methylamine and particulates. Exposed to higher concentrations where class 2 protection is required. Working with a variety of chemicals (refer to 6059) as well as particulates. Must be worn with a 3M full face respirator. Two pairs per box.
CODE 404640
P3K2E2B2A2
404777
404775
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
RE
SP
IRA
TO
RY
PR
OT
EC
TIO
N
77
F I L T E R SF I L T E R S
CODE 4047773M FILTERS FOR 6000 AND 7500 RESPIRATORS
PARTICULATE FILTER 5925, P2
P2 protection against dusts and mists when fitted to 6000 series cartridges with the 501 retainer. 5 pairs per box.
CODE 406423
RESPIRATOR WIPES 504
• Pre-moistened towelettes for hygienically cleaning reusable respirators
• Alcohol free and individually packed
CODE 114537 Box of 100 wipes
OZONE AND NUISANCE LEVEL ORGANIC VAPOUR/ACID GAS FILTER 2138 GP2/GP3*
Toxic particulates, nuisance** level acid gases and organic vapours with low vapour pressure. For protection against toxic particulates such as mould remediation. Also for nuisance** level acid gases and organic vapours with low vapour pressure <1.3 Pa @ 25˚C.
CODE 406254
OZONE & NUISANCE LEVEL ACID GAS FILTER 2128, GP2
Particulates, ozone and nuisance** level acid gas and organic vapours with low vapour pressure. For protection against welding fume, ozone, polishing and grinding particles. Also for spraying pesticides or herbicides with vapour pressure < 1.3 Pa @ 25°C.
CODE 406256
PARTICULATE FILTER 6038, P2/P3*HF
Unique solid top particulate filter casing design reduces premature caking and clogging from dirt, grime, water or dust and aids in decontamination practices. For protection when working with particulates; hydrogen fluoride, nuisance** level organic vapours and acid gas. Includes working in certain chemical and fertiliser plants. 10 pairs per box.
CODE 409238
PARTICULATE FILTER 6035, P2/P3*
Unique solid top particulate filter casing design reduces premature caking and clogging from dirt, grime, water or dust and aids in decontamination practices. For protection against certain particles, dusts, mists and fumes. Also for certain asbestos tasks (refer to Worksafe NZ guidelines). Carrying out lead or mould remediation. 10 pairs per box.
CODE 406258
*Higher P3 protection factors only achieved with a 3M Full Face Respirator, otherwise P2 protection level when worn on a 3M Half Face Respirator**Nuisance levels are those levels below the Workplace Exposure Standard (WES)
GP2
GP2/GP3*
PARTICULATE FILTER 2135, P2/P3*
Toxic particulates. For protection against certain dusts, mists and fumes such as sanding, grinding, cutting, drilling metal, masonry, wood and concrete, welding, brazing and smelting.
CODE 406255
P2/P3*HF
P2/P3*
PARTICULATE FILTER 2125, P2
Particulates. For protection against certain dusts, mists and fumes such as sanding, grinding, cutting, drilling metal, masonry, wood and concrete.
CODE 406257
P2
PARTICULATE & HYDROGEN FLUORIDE FILTER 2076, P2HF
Particulates and hydrogen fluoride. For protection against certain dusts, mists e.g. working in certain chemical and fertiliser plants.
CODE 117048
P2HFP2
P2/P3*
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
RE
SP
IRA
TO
RY
PR
OT
EC
TIO
N
78
F I L T E R SF U L L F A C E R E S P I R A T O R S & F I L T E R S
SCOTT SAFETY PROMASK FULL FACE RESPIRATOR
Multi-functional full face respirator suitable for use with negative pressure and powered air respirators. The facepiece is made from a specially engineered halo-butyl elastomer compound offering high resistance to chemicals and aging. This Promask features a unique speech diaphragm which helps transfer clear and audible speech along with a sweat port in the chin pocket providing added comfort during extended wear times. Certified to AS/NZS 1716:2012.
CODE 119061
COMMON SPARE PARTS:CODE 119080 Polycarbonate visor
119085 Polycarbonate visor (Hard coated) 119065 Valve seat set 119071 Valve disc set 119073 Head harness (Rubber) 119087 Visor covers (Pkt of 10)
SARI FULL FACE RESPIRATOR
The Sari Full Face Respirator’s wide sealing edge provides excellent fit and is comfortable to wear for long periods without the user becoming tired or stressed. The large, distortion free visor is available in three types, Polycarbonate, Polyamide or Triplex glass visor. Misting up is prevented by directing the inhalation air flow across the inside of the visor and the safeguarded speech diaphragm enhances clear communication. Utilising the full range of Pro2000 filters (sold separately) or attach to powered air purifying respirators (PAPR) or Airline Systems. Certified to AS/NZS 1716:2012.
CODE 119431 Sari full face mask silicone (Yellow) 119458 Sari full face mask rubber (Grey)
COMMON SPARE PARTS:CODE 119466 Polyamide visor
119695 Triplex glass visor 119571 Valve set 119725 Silicone head harness 119563 Visor covers (Pkt of 10)
PRO2000 FILTERS FOR PROMASK AND SARI RESPIRATORS
COMBINATION FILTER CF22 B2P3
B2P3 combination filter for inorganic gases & vapours, solid & liquid particles, radioactive & toxic particles, bacteria & viruses, fumes & mists.
CODE 119628
PARTICLE FILTER PF10 P3
Particulate filter for solid/liquid particulates, radioactive, toxic particles, bacteria, viruses, fumes/mists.
CODE 119652
COMBINATION FILTER CF32 E2P3
E2P3 combination filter for sulphur dioxide, acid gases, solid & liquid particles, radioactive & toxic particles, micro-organisms (bacteria, viruses & spores) & enzymes, fumes & mists.
CODE 119636
K2
B2 P3
P3
E2 P3
COMBINATION FILTER CF22 A2P3
A2P3 combination filter for organic gases and vapours (e.g. solvents with a boiling point higher than 65˚C), solid and liquid particles, radioactive and toxic particles, bacteria and viruses, fumes and mists.
CODE 119601
A2 P3
COMBINATION FILTER CF32 A2B2E2K2P3
A2B2E2K2P3 combination filter for organic and inorganic gases and vapours, acid gases and vapours, ammonia and organic ammonia derivatives, solid and liquid particles radioactive and toxic particles and bacteria.
CODE 119539
K2E2B2 P3
COMBINATION FILTER CF22 A2B2P3
A2B2P3 combination filter for organic, inorganic gases and vapours, solid and liquid particles, radioactive and toxic particles, microorganisms (bacteria, viruses and spores) and enzymes, fumes and mists.
CODE 119635
B2A2 P3
GAS FILTER GF22 K2
K2 gas filter for ammonia and organic ammonia derivatives.
CODE 119644
GAS FILTER GF22 A2
A2 for organic gases & vapours e.g. solvents with boiling point higher than 65°C.
CODE 119120
A2
A2
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
RE
SP
IRA
TO
RY
PR
OT
EC
TIO
N
79
F I L T E R SF U L L F A C E R E S P I R A T O R S & F I L T E R S
PRO2000 FILTERS FOR PROMASK AND SARI RESPIRATORS
PHANTOM VISION P3 PAPR FILTER
Particulate filter for solid/liquid particulates,radioactive, toxic particles, bacteria, viruses,fumes/mists.
CODE 408916
PRE-FILTER KIT PRO2000
The pre-filter pad and retainer system is used in conjunction with the Pro2000 gas, vapour and particle filters to provide extended filter life.
CODE 119257 Pre-filter set. Incl. two holders and six pre-filters 119253 Pre-filter pack of 20
DID YOU KNOW...
PROFLOW SC120 PAPR USES THE FOLLOWING FILTERS PRO2000 CF22 A1P3, CF22 B1P3, CF32 B1E1K1P3, CF22 B1E1P3
PROFLOW SC160 USES THE FOLLOWING FILTERS PRO2000 PF10 P3 FILTER
Size mattersEven with the correct filters for the job you still won’t be protected if your mask doesn’t fit.
Quantitative Fit Testing guarantees clients precise evidence and documentation of results for each individual employee - in compliance with the AS/NZS Standards.
Portacount Pro+Portacount compares the particles outside a wearer’s mask with those inside it, that have got past the face seal. This will identify if the user has adequate levels of protection for the work being performed.
At the end of the test, a report is produced for inclusion in the employee’s records.
QUANTITATIVE FIT TESTING
AXP3 P3
COMBINATION FILTER CF32 A1B1E1K1HgP3
A1B1E1K1HgP3 combination filter for organic, inorganic acid gases and vapours, ammonia and organic ammonia derivatives, nitrogen oxides, carbon monoxide, mercury and mercury compounds, solid and liquid particles, radioactive and toxic particles,Microorganisms (bacteria, viruses and spores)And enzymes, fumes and mists.
CODE 119512
P3
COMBINATION FILTER CF22 AXP3
AXP3 combination filter for gases and vapours from organic compounds with boiling point below 65˚c, solid and liquid particles radioactive and toxic particles, bacteria and viruses, fumes and mists. Filter is single use only.
CODE 119504
COMBINATION FILTER CFR 32 A2B2E2K1HG CONO P3
Organic, inorganic acid gases and vapours, ammonia and organic ammonia derivatives, mercury, nitrogen oxides and carbon monoxide, solid and liquid, radioactive and toxic particles and micro-organisms, eg. Bacteria and viruses.
CODE 408392
COMBINATION FILTER CFR 22 A1B1E1K1 CONO P3
Organic, inorganic acid gases and vapours, Ammonia and organic ammonia derivatives, Nitrogen oxides, carbon monoxide, solid and liquid, radioactive and toxic particles and micro-organisms.
CODE 408391
P3B1A1 E1 K1 CO NO P3CO NOK1E2B2A2 Hg
Hg
Contact us to arrange on-site fit testing and a RPE toolbox today.
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
RE
SP
IRA
TO
RY
PR
OT
EC
TIO
N
80
F I L T E R SP O W E R E D A I R R E S P I R A T O R
CleanSpace2 combines the ease of use and mobility of a passive respirator with the added protection, reliability and durability of a positive air powered respirator. What makes CleanSpace2 so different is that it does this all in a small compact unit and without the high costs normally associated with the purchasing and maintaining PAPRs.
Reliable protection• High efficiency filtration of hazards
Innovation• Ergonomic design: compact
powered respirator with no trailing leads, cables or hoses
• Motor generates airflow up to 200L/min with only one moving part
• Provides positive pressure inside the mask, with an in-built pressure sensor that adjusts the air-flow to prevent contamination
• Breath activated On/Off operation
ApplicationsWelding, Woodworking, Manufacturing, Smelting, Construction, Recycling Plants, Emergency Services, Mining, Agriculture, Processing Plants, Grinding, DIY etc.
Ease of use• Simple to fit and use
• Changing filters is quick and intuitive
• Easy to clean; fast 2 hour charge
• On a single charge up to 11 hours* operating time (*with CleanSpace2™ Endurance Pack)
CompatibilityCleanSpace2 can be used with:
• Welding & Safety Helmets
• Goggles, Spectacles and Face Shields
• Hearing Protection
CLEANSPACE2
CLEANSPACE2™ MASK Q SERIES
• Soft, hygienic, non-allergenic medical grade silicone mask
• Smaller size for compatibility with glasses• Simple clip mechanism for easy changing
for different wearers, or removal for washing• Easily cleaned in warm soapy water or in
the top shelf of a dishwasher• Valve in the front of the mask for high
exertion workload or sudden expirations
CODE 408801 Medium 408802 Large
CLEANSPACE2™ STARTER KIT
Provides positive pressure inside the mask, with an inbuilt pressure sensor that adjusts the air-flow to prevent contamination. Breath activated On/off operation. CleanSpace2™ maximises filter life by only filtering the air that you breathe. Compatible with welding & safety helmets, goggles, spectacles and face shields, hearing protection.
Includes: Power Unit, filter, charger, harness, neckpads (thin and thick), flow test cap, storage bag (Does not include mask)
CODE 409014
CLEANSPACE™ MASK H SERIES
• Soft, hygienic, non-allergenic medical grade silicone mask
• Larger size for comfort and speech• Simple clip mechanism for easy changing
for different wearers, or removal for washing• Easily cleaned in warm soapy water or in
the top shelf of a dishwasher• Valve in the front of the mask for high
exertion workload or sudden expirations
CODE 409016 Small 409017 Medium
FRONT
BACK
C L E A N S P A C E 2 ™ A C C E S S O R I E S
HEAD HARNESS
Webbed harness that is comfortable, light and washable. For use during high exertion work for long periods of time or when the wearer is highly mobile.
CODE 409015
MASK CLEANING WIPES
• Mask and equipment cleaning wipes • Alcohol free• 100 sachet wipes per box.
CODE 409029
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
RE
SP
IRA
TO
RY
PR
OT
EC
TIO
N
81
F I L T E R SP O W E R E D A I R R E S P I R A T O R
CLEANSPACE2™ FILTERS
CLEANSPACE2™ PARTICULATE FILTER P3 AND HONEYCOMB SNAP LID
Particulate P3 filter to be used with the combined filter: 409026, 409028; and high efficiency; meltblown pad; suitable for use against solid particulates including dust, fumes, fibres, bacteria and viruses. Honeycomb snap lid (black) that snaps onto the gas cartridge case to hold the filter pad in place. Pack of 8 filters. Snap lid x 1.
CODE 411367
CLEANSPACE2™ PRE-FILTER
Thin, light particulate woven pre-filter; high quality; flame retardent pre-filter; Extends the life of the CleanSpace2™ particulate filters. Pack of 10.
CODE 409023
CLEANSPACE2™ FILTER COVER KIT
Replacement for filter cover; Includes filter cover with allen (Hex) key.
CODE 409021
CLEANSPACE2™ COMBINED FILTER AU:ABE1P3
A combination filter for protection against organic gases and vapours (boiling point >65˚c), inorganic gases and vapours and acid gases, dusts, mists and fumes.
CODE 409028
CLEANSPACE2™ PARTICULATE FILTER TTM3/P3 HEPA
Particulate filter; high efficiency. Suitable for use against solid and liquid particulates including dusts, mists, fumes, fibres, bacteria and viruses. Pack of 3.
CODE 409025
CLEANSPACE2™ FILTER ADAPTOR
CleanSpace2™ Filter Adaptor is designed to be fitted easily to the CS2 respirator to allow gas filters and P3 - Hi Capacity filter to be used. The Adaptor comes with a hex key.
CODE 409022
CLEANSPACE2™ HI CAPACITY PARTICULATE FILTER P3 HEPA
High capacity particulate filter. Suitable for use against solid and liquid particulates including dusts, mists, fumes, fibres, bacteria and viruses.
CODE 409024
CLEANSPACE2™ COMBINED FILTER AU:A1P3
A combination filter for protection against organic gases and vapours (eg solvents with a boiling point higher than 65˚C) and mechanical and thermally generated particles including dusts, mists and fumes generated by welding, grinding & sanding.
CODE 409026
CLEANSPACE2™ ENDURANCE PACK
External charging battery that provides an additional 5 hours operating time; AC adaptor and pouch. Weight 180g; No leads or wires; Light, comfortable and easy to use.
CODE 409019
CLEANSPACE2™ PORTACOUNT FIT TESTING ADAPTER
Attaches to the CleanSpace2™ for test fitting.
CODE 408797
CLEANSPACE™ THIN NECK PAD
Made of a light, washable neoprene fabric. For wearers with a thicker neck size. The thin neck pad is 0.7cm thick.
CODE 408799
CLEANSPACE2™ COOL NECK PAD
Long lasting (up to 8 hours) cooling effect. Ideal for heavy work & hot conditions. Re-useable up to 30 times. Easy re-activation in water. Place in fridge for 30 minutes for enhanced cooling effect. Polymer is non-toxic and hypo allergenic.
CODE 408803
C L E A N S P A C E 2 ™A C C E S S O R I E S
A1 P3
P3B1A1 E1
P3
P3
P3
P3
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
RE
SP
IRA
TO
RY
PR
OT
EC
TIO
N
82
H O O D S , F A C E S H I E L D S & H E L M E T SH E A D C O V E R S & H O O D S
VERSAFLO™ HEADCOVER S-133
• Easy to use, fully assembled polypropylene laminate head cover with integrated head suspension
• Wide field of view and scratch resistant Polyethylene Terephthalate Glycol (PETG) visor
• Soft elastic face-seal for improved comfort and reduced noise
Applications: General purpose, woodworking and food processing. Suitable for applications that require frequent replacement of the entire headtop assembly.
CODE 406534 Small/Medium 406533 Medium/Large 406586 Visor Cover Small - Bag 10 406587 Visor Cover Large - Bag 10
VERSAFLO™ HOOD S-533
• Easy to use, fully assembled polyurethane coated polyamide hood with integrated head suspension
• Similar to S-433, but with a more durable, soft, low linting fabric that more readily drapes comfortably over the wearer
• Wide faceseal with soft elastic for improved comfort and reduced noise
• Wide field of view with added chemical and scratch resistance polycarbonate visor
Applications: Pharmaceutical manufacturing, liquid handling, battery manufacturing, health care, marine, refining and extraction. Suitable for applications that require neck and shoulder coverage and frequent replacement of the entire headtop assembly.
CODE 407927 S-533S Small/Medium 407926 S-533L Medium/Large 406586 Visor Cover Small - Bag 10 406587 Visor Cover Large - Bag 10
VERSAFLO™ HOOD S-433
• Easy to use, fully assembled polypropylene laminate hood with integrated head suspension
• Includes additional neck and shoulder coverage
• Wide field of view and scratch resistant Polyethylene Terephthalate Glycol (PETG) visor
Applications: Pulp and paper, health care, battery manufacturing, refining and extraction. Suitable for applications that require neck and shoulder coverage and frequent replacement of the entire headtop assembly.
CODE 407925 S-433S Small/Medium 407924 S-433L Medium/Large 406586 Visor Cover Small - Bag 10 406587 Visor Cover Large - Bag 10
VERSAFLO™ HEADCOVER S-333
• Easy to use, fully assembled polyurethane coated knitted nylon head cover with integrated head suspension
• Quiet to wear and made with low-linting fabric
• Wide field of view with added chemical and scratch resistance polycarbonate visor
Applications: Pharmaceutical manufacturing, powder/grain mixing, food processing and pulp and paper. Suitable for applications that require softer fabric with more drape than the S-133.
CODE 406536 Small/Medium 406535 Medium/Large 406586 Visor Cover Small - Bag 10 406587 Visor Cover Large - Bag 10
VERSAFLO™ HOOD S-655
• Head, face and neck coverage with wide field of view
• Polypropylene laminate hood with reusable head suspension cost effective choice for high hood disposal environments
• Replace soiled hood only while head suspension and air ducting is reused
• Scratch resistant Polyethylene Terephthalate Glycol (PETG) visor
• Comfortable knitted inner collar
Applications: Pulp and paper, liquid handling, battery manufacturing, health care, food and beverage.
CODE 407928 S-655 407935 Visor cover - Bag 10
RESPIRATOR SELECTION
STEP 1 CHOOSE YOUR
HEADTOP
STEP 2 CHOOSE THE APPROPRIATE
BREATHING TUBE
STEP 3 CHOOSE YOUR
AIR DELIVERY UNIT
STEP 4 CHOOSE YOUR
FILTERS AND ACCESSORIES
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
RE
SP
IRA
TO
RY
PR
OT
EC
TIO
N
83
H O O D S , F A C E S H I E L D S & H E L M E T SH E A D C O V E R S & H O O D S
VERSAFLO™ PAINTERS HOOD S-757
• Polypropylene laminate (double layer) hood with internal film barrier to help prevent paint contact with clothes or skin
• Reusable head suspension. Cost effective for high hood disposal environments
• Scratch resistant Polyethylene Terephthalate Glycol (PETG) visor
Applications: Paint spraying and liquid handling, automotive and marine
CODE 407932 S-757 407935 Visor Cover - Bag 10
VERSAFLO™ HELMET M-307
• Integrated respiratory, head, eye and face protection
• Coated polycarbonate visors provide added chemical and scratch resistance
• Flame resistant face seal• Optional hearing protection via
helmet-attach earmuffs• Approved to: AS/NZS 1716 Respiratory
Protection, AS/NZS 1801 as a Type 1 Industrial Safety Helmet, AS/NZS 1337.1 high impact eye protection
Applications: Construction, grinding, foundries, heavy industry, metal fabrication, recycling and processing plants.
CODE 407464 Helmet, M-307 407916 Peel off Visor - Bag 10
VERSAFLO™ HOOD S-657
• Polypropylene laminate hood with reusable head suspension cost effective choice for high hood disposal environments
• Scratch resistant Polyethylene Terephthalate Glycol (PETG) visor
• Wearers can elect to tuck the inner shroud into a shirt or protective coverall
• Excess air can be channelled over the body, providing additional comfort
Applications: Pulp and paper, health care, food and beverage.
CODE 407930 S-657 407935 Visor cover - Bag 10
VERSAFLO™ FACESHIELD M-107
• Integrated respiratory, eye, face protection• Coated polycarbonate visors provide
added chemical and scratch resistance• Flame resistant face seal• Optional hearing protection via
helmet-attach earmuffs• Approved to AS/NZS 1716
Respiratory Protection• Meets the performance standards of
AS/NZS 1337.1 for high impact eye protection.
Applications: Grinding, polishing, spraying, powder coating, chemical processing and when working with hot particles.
CODE 407463 Faceshield, M-107 407916 Peel off Visor - Bag 10
VERSAFLO™ HOOD S-855
• Sealed seam hood for liquid chemical splash environments
• Knitted inner collar• Cost effective, as just the soiled hood fabric
is replaced. Air ducting can be reused• Fabric Material: Zytron® 200• Visor Material: Coated polycarbonate with
added chemical and scratch resistance
Applications: Chemical handling, laboratory services, pharmaceutical manufacturing, pesticide application
CODE 409252 S-855
VERSAFLO™ HELMET M-400
• Integrated respiratory, head, eye and face protection with added neck and shoulder coverage
• Coated polycarbonate visor for added chemical and scratch resistance
• Approved to: AS/NZS 1716 Respiratory Protection, AS/NZS 1801 as a Type 1 Industrial Safety Helmet, AS/NZS 1337.1 high impact eye protection
• M-406: High durability shroud for construction and heavy industry work
• M-407: Flame resistant shroud for work involving sparks and hot particles
Applications: Grinding, foundries, heavy industry, metal fabrication and processing plants.
CODE 407465 Helmet, M-406 407466 Helmet, M-407 407916 Peel off Visor - Bag 10
A C C E S S O R I E S
VERSAFLO™ BT-40 BREATHING TUBE
• Heavy-duty breathing tubeMaterial: Neoprene Length: 840 mm
CODE 407898
VERSAFLO™ BT-20S & L BREATHING TUBE
• Lightweight breathing tube that comes in two lengths and is easy to wipe down
Material: Polyurethane. Length: 735-965mm
CODE 407896
VERSAFLO™ BT-30 BREATHING TUBE
• Self-adjusting length for improved fit for wearers and minimises risk of catching and snagging
Material: Polyurethane. Length: 525-850 mm
CODE 407897
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
RE
SP
IRA
TO
RY
PR
OT
EC
TIO
N
84
P O W E R E D & S U P P L I E D A I RP O W E R E D & S U P P L I E D A I R
VERSAFLO™ POWERED AIR PURIFYING RESPIRATOR, TR-300
• Compact & lightweight, easy-to-use, versatile powered air respirator for environments with hazardous particles
• Slim profile design is ideal for use in tight spaces
• Factory calibrated, controlled air flow at nominal 190 L/min
• Audible and visual low air flow and low battery alarms
• LED gauge on the battery pack provides an indication of charge status
• High-capacity battery runs for at least 10-12 hrs. Recharging time less than 3.5 hrs
• IP53 rated making it suitable for use in decontamination showers
• Accessories and options to suit different applications
• 3 filter choices• Meets the performance standards of
AS/NZS 1716:2003 for Respiratory Protection
CODE 408179 TR-315A Starter Kit 408192 TR-3600 Pre-filter 408193 TR-3710 P3 Filter 408194 TR-3800 P3/Nuisance Organic Vapour 408195 TR-3820 P3/HF/
Nuisance Acid Gas
POWERFLOW™ 6800 PLUS POWERED AIR RESPIRATOR
• Face mounted Powered Air Respirator with high impact eye and face protection for stripping and handling asbestos containing materials
• Easy to maintain and decontaminate• Soft, comfortable silicone faceseal• Large polycarbonate lens with wide field
of view• Smooth easy clean waist belt• Meets the performance standards of
AS/NZS 1716:2003 for Respiratory Protection• Meets the performance standards of
AS/NZS 1337.1 for high impact Eye Protection
CODE 408998 Powerflow™ 6800 Plus Powered Air Respirator 195774 P3 Particulate Filter 411386 Powerflow Air Turbo 6800DIN Medium Full Face Respirator 410345 Large Full Face Respirator
VERSAFLO™ SUPPLIED AIR REGULATOR, V-500E
• An individually-adjustable, consistently-controlled airflow regulator
• Regulator requires working pressure of 3.5-8 bar and is extremely quiet due to the integrated silencer (<65 dBA)
• Integrated warning whistle warns user of low airflow into headtop
• Spray gun or compressed air tool port• Replaceable carbon filter• Airflow: 170-305 l/min• Weight: 550g• Meets the performance standards of
AS/NZS 1716:2003 for Respiratory Protection
CODE 408180
HEATING AND COOLING AIRLINE KITS
Designed to improve comfort in environments where the ambient temperature needs either heating or cooling.• Kits include belt, air regulating valve with
muffler and breathing tube• Can be combined with approved
3M™ head tops• CEJN double action fittings• User adjustable flow rate. Continuous
flow airline system provides a high level of protection
• The air that is delivered to the 3M Airline Kits must meet the specifications of AS/NZS 1715
• Approved to AS/NZS 1716
Applications:Chemical and pharmaceutical industries, spray painting, powder coating, metal finishing.
CODE 408181 Heating Airline Kit 408182 Cooling Airline Kit
NOTE: Not to be used in areas that are oxygen deficient or in an immediately dangerous to life and health environment (IDL H).
JUPITER™ POWERED AIR PURIFYING RESPIRATOR SYSTEM
• System includes: Air Turbo with air flow check & calibration tubes, decontamination belt and breathing tube, 8-hour battery pack and battery charger, user instructions
• Audible and visual low air flow and low battery alarms
• Optional accessories include: Back pack, shoulder braces, flame retardant hose cover and heavy duty breathing tube
• Three filter types to cater for nearly all industry (dust, mist, gas and vapour) requirements
• Approved to AS/NZS 1716 for Respiratory protection
Applications: Construction, manufacturing, agriculture, pharmaceutical and chemical handling.
CODE 117877 Jupiter Turbo Kit 117886 Jupiter P3 Filter 117887 Jupiter A1P3 Filter 117888 Jupiter ABEK1P3 Filter 193356 Jupiter Pre-filter (Pack of 25)
YOU MAY ALSO BE INTERESTED IN:
GO TO PAGE
116POWERED AIR
SUPPLIED WELDING HELMETS
GO TO PAGE
61GAS DETECTORS
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
RE
SP
IRA
TO
RY
PR
OT
EC
TIO
N
85
P O W E R E D & S U P P L I E D A I RP O W E R E D & S U P P L I E D A I R
AIRLINE BREATHING HOSE
• 15 metre lengths with corresponding fitting to connect to Prosafe Air Purifiers
• The other end has a double action coupling designed to fit the 550468 male fitting
• Conforms to AS /NZS 1716:2003, AS 2299 and AFDA standards
• Custom lengths available on request
CODE 847011L
SARI COMBINATION KIT
The system is designed to provide air at a constant flow from 120 l/min to 300 l/min and is tested and approved to EN 139. The face piece complies to EN 140.
CODE 119458 Sari full face mask, rubber (Grey) 119431 Sari full face mask, silicone (Yellow) 119156 Kesafe connector 408550 Flow control belt
AIRVISOR MV KIT
• Disposable face skirt cassette• Foam or flame retardant skirt material available• Waistbelt with tamper-proof airflow regulator• Additional spray gun hose assembly
(only with MV Paint Kit)• Clear acetate visor (MV Paint Kit)• Polycarbonate visor (MV industrial Kit)
Applications: Environments containing particulates, gases & vapours up to 100 times the relevant exposure limit.
CODE 848912 AirVisor MV Industrial Kit 848907 AirVisor MV Paint Kit 848914 Visor Cover pkt 10
AIR PURIFIERS
Prosafe 2 Man Air Purifiers provide dry, clean air by reducing solids, hydrocarbons, oil and water vapour in compressed air systems.• Air Quality to ISO 8573-1: Class 1
(particles and oil content)• Medium: Compressed air only• Maximum operating pressure: 10 bar• Recommended comfortable breathing
temperature: 15 to 25 degrees CNOTE: These units will not remove carbon monoxide, carbon dioxide or other toxic gases or fumes.
CODE 404230 Free standing cabinet 404231 Wall mounted 550429 Replacement pre-filter 550430 Replacement main filter 550431 Replacement
carbon filter
TURBOVISOR MV
• Robust design with lightweight construction• P2 electrostatic filter supplied as standard,
odour filter optional• Wide view visor gives maximum comfort• Detachable cotton neck cover to protect hair• Tilt visor can be raised when out of the
hazard area
Applications: Suits many different applications such as asbestos and lead abatement & pharmaceutical manufacturing.
CODE 848910 Turbo Visor MV 848914 Visor Cover pkt 10
PROMASK COMBI
The Promask Combi is ideal for jobs where the user needs to disconnect the air supply while still in the contaminated area. When the air supply is disconnected, the filter takes over for escape or continued protection while walking out of the contaminated area.Certified to AS/NZS 1716:2012.
CODE 119063 Promask combination mask (Purchase with Scott Safety Flow control belt) 408550 Flow control belt
A C C E S S O R I E S
FEMALE FITTING HOSE TAIL
Female fitting of the Festo double action coupling. Hose tail end attaches to the airline breathing hose, female double action coupling end attaches to male fitting on the waist worn regulator.
CODE 550471
MALE FITTING HOSE TAIL
Male fitting of the Festo double action coupling. Hose tail end attaches to the airline breathing hose, male fitting end attaches to female double action coupling on the air purifier.
CODE 550470
FEMALE FITTING THREADED
Female fitting of the Festo double action coupling. Threaded end attaches to the air purifier, female double action fitting end attaches to male fitting on the airline breathing hose.
CODE 550469
MALE FITTING THREADED
Male fitting of the Festo double action coupling. Threaded end attaches to the waist worn regulator, male fitting end attaches to female double action coupling on the airline breathing hose.
CODE 550468
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
RE
SP
IRA
TO
RY
PR
OT
EC
TIO
N
86
S U P P L I E D A I R & H E A D T O P SP O W E R E D A I R & H E A D T O P S
FLOWHOOD 2 PAPR HEADTOP
Full hood manufactured from a durable PU coated nylon fabric. Shoulder cape for neck and shoulder protection. Excellent vision with low impact acetate visor. Supplied with PU hose to connect to Proflow SC 120.
CODE 406557
AUTOMASK LITEHOOD PAPR HEADTOP
The Automask with additional Litehood PVC hood provides full head and neck protection. EPDM hose to connect to Proflow SC 120 sold separately.
CODE 119124 Automask Litehood 119122 EPDM hose
AUTOMASK PAPR FACESHIELD
Lightweight multi-purpose faceshield, foam edge for increased comfort. Anti-fog cellulose acetate visor for excellent vision. EPDM hose to connect to Proflow SC 120 sold separately. Certified to AS/NZS 1716:2012.
CODE 119249 Automask 119122 EPDM hose 119099 Replacement visor 119094 Replacement harness 119250 Replacement
tightening edge
FLOWHOOD 1 PAPR HEADTOP
Ultra-lightweight half hood for increased wearer comfort and protection. Provides airflow to head and face, excellent vision with a low impact acetate visor. Supplied with PU hose to connect to Proflow SC 120. Certified to AS/NZS 1716:2012.
CODE 406556
PROFLOW SC 160
Ideal protection for use in applications such as powder coating, horticulture, pest destruction, fibreglass and manufactured fibres removal. Respirator and filters sold separately. Certified to AS/NZS 1716:2012 when sold with Scott Safety full face mask and filter.
CODE 407822 Proflow SC 160l/min 119652 Particle filter PF10 P3
PROFLOW SC 120
Ideal protection for use in applications such as powder coating, horticulture, pest destruction and fibreglass. Incorporated data-logging function for easy recording. Includes blower unit, battery, recharger, hose with DIN thread & padded belt. Respirator and filters sold separately. Certified to AS/NZS 1716:2012 when sold with Scott Safety headtop and filter.
CODE 119815 Proflow SC120l/min 119652 Particle filter PF10 P3 119601 Combination filter CF22 A1 P3 119628 Combination filter CF22 B1 P3 119539 Combination filter CF32 B1E1K1P3 411421 Combination filter
CF22 B1E1P3
PHANTOM VISION
High performance brushless motor provides reliable full-shift operation and a long service life. It has high levels of water protection and can continue operating while the wearer uses a decontamination shower. Includes medium size mask, battery, belt, charger, P3 filter, shower cover and storage case.
CODE 408917 Phantom Vision 408916 Replacement
PAPR P3 Filter
YOU MAY ALSO BE INTERESTED IN:
GO TO PAGES
78-79FILTERS
GO TO PAGE
210MANDATORY SIGNS
PROMASK PAPR FULL FACE RESPIRATOR
Complete with sweat port in chin pocket, outstanding speech diaphragm, wide sealing edge and made from Halo-Butyl elastomer compound, this full face respirator combines superior comfort and fit. Hose to connect to Proflow SC 120 sold separately.
CODE 119061 Promask 119125 Elbow hose
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
RE
SP
IRA
TO
RY
PR
OT
EC
TIO
N
87
S U P P L I E D A I R & H E A D T O P SP O W E R E D A I R & H E A D T O P S
PROMASK WELDING VISOR ADAPTOR
The Promask welding adaptor is a lift-up welding lens that attaches to the front of the Promask. Shade 10.
CODE 406558
FLOWHOOD 1 AIRLINE HEADTOP
Ultra-lightweight half hood for increased wearer comfort and protection. Provides airflow to head and face, excellent vision with low impact acetate visor. Supplied with PU hose to connect to FCV Airline Regulator. Certified to AS/NZS 1716:2012.
CODE T1
FLOWHOOD 25 AIRLINE HEADTOP
Full hood with safety helmet and integral visor. Developed to offer integrated protection in higher risk environments including demolition, toxic and hazardous materials handling and comes complete with EPDM hose to connect to FCV Airline Regulator. Certified to AS/NZS 1716:2012.
CODE 400993
FLOWHOOD 2 AIRLINE HEADTOP
Full hood manufactured from a durable PU coated nylon fabric. Shoulder cape for neck and shoulder protection. Excellent vision with low impact acetate visor. Supplied with PU hose to connect to FCV Airline Regulator. Certified to AS/NZS 1716:2012.
CODE T2
FLOWHOOD 5 AIRLINE HEADTOP
Lightweight with a flip up high impact polycarbonate visor. An integrated helmet provides head protection and comes complete with EPDM hose to connect to FCV Airline Regulator. Certified to AS/NZS 1716:2012.
CODE 406424
FCV AIRLINE REGULATOR
Waist-mounted pressure regulator for use with a medium pressure compressed airline system. Incorporates a quick fit bayonet connector for use with a range of Scott Safety Airline headtops and can be removed to allow connection to a small bore airline hose for use with the Scott Safety Promask Combi full face respirator.FEATURES:• Incorporates a CEN supply
airline hose coupling• Low-pressure warning whistle • In-line residual odour filter that removes any
residual vapours and oil• Approved for use with the T1, T2, T3, T5 and
T25 Airline headtops and Promask Combi.
Applications: Construction, Pharmaceutical, Automotive, Heavy and Light industries, Oil and Gas, Mining.
CODE 408550
IF YOU’RE WORKING IN A CONFINED SPACE, THEN YOU NEED THE RIGHT TRAINING.
FLOWHOOD 3 AIRLINE HEADTOP
Combines high impact eye and face protection in a lightweight durable PU coated nylon head covering for increased wearer comfort and protection. Comes with a Polycarbonate visor. Supplied with PU hose to connect to FCV Airline Regulator. Certified to AS/NZS 1716:2012.
CODE T3PC
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
S C B A & E S C A P E R E S P I R A T O R S D I S P O S A B L E R E S P I R A T O R SR
ES
PIR
AT
OR
Y P
RO
TE
CT
ION
88
SCBA SCOTT SIGMA 2 T2
Approved to EN137:2006 Type 2, the Scott Sigma 2 Type 2 Self Contained Breathing Apparatus combines the highest level of respiratory protection in a simple to operate, cost effective piece of equipment that meets the needs of Industrial and Marine firefighters. Sigma 2 Type 2’s proven durability, reliability and appeal is confirmed by an extensive user base who demand a combination of maximum performance and true operational simplicity. MED approved. NOTE: Cylinder sold separately
CODE 406545 Promask PP Face Mask 411385 Sigma 2 T2 set 403000 9L Cylinder
ELSA CONSTANT FLOW ESCAPE BA
The Emergency Life Support Apparatus (ELSA) is designed for rapid escape from hazardous industrial environments.• Ten minute air supply• Unique cuboid hood with elastomeric neck
seal for easy donning and excellent visibility• Automatic activation• A constant flow of air is provided upon
opening of the ELSA bag• MED approved• 15-minute version is also available• Certified to AS/NZS 1716:2012.
CODE 402311
FLITE ESCAPE AIRLINE BA
Open circuit positive pressure airline breathing apparatus with the option of hip mounted 10 minute compressed air cylinder supply for escape from the most hazardous environments. Ideal for extended working, restricted access areas, working in confined spaces. The Flite’s robust design has been proven in some of the most arduous working environments including offshore oil and gas production. Certified to AS/NZS 1716:2012. Uses the Promask PP face mask.
CODE 406545 Promask PP Face Mask 408949 Flite Airline breathing Apparatus 408950 Flite 2L Cylinder
FENZY EMERGENCY ESCAPE KIT
The Fenzy Bio-s-cape is designed for rapid escape from hazardous industrial environments.• 15-minute air supply (ten minute version is
also available)• Automatic activation• Hood is made of waterproof and flame
retardent hi-vis material• Donning of inner mask is performed
automatically via an inflatable air cushion intergrated in the neck
• Warning whistle indicates imminent end of air reserve
• Heavy-duty PVC carry bag with quick opening through velcro closure
• MED approved and approved to AS/NZS 1716:2003
CODE 404229
FENZY ARIES SCBA SET
The Aries SCBA set gives a high level of protection and has been packaged to provide a simple and effective solution for use in industry.• Automatic positive pressure demand valve
(no first breath required)• Accepts cylinders from 4 to 9 litres• MED approved (Marine Equipment Directive)NOTE: Cylinder sold separately.
CODE 404226 SCBA set including Biomask full facepiece 404228 9L cylinder
Emergency life support apparatusAre designed for rapid escape from hazardous industrial and marine environments.
An air bottle provides 10 – 15 minutes of air to a hood that seals around the neck of the wearer allowing them to self rescue themselves from the hazardous area.
SELF RESCUE
AIRWAVE® RESPIRATORS
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
S C B A & E S C A P E R E S P I R A T O R S D I S P O S A B L E R E S P I R A T O R S
RE
SP
IRA
TO
RY
PR
OT
EC
TIO
N
89
P2 + NUISANCE ORGANIC VAPOURS AIRWAVE® RESPIRATOR - 4800
• Exclusive easy-breathing wave design• Less resistance, better breathability• SmartStrap allows respirator to hang
around the neck
CODE 410440 Box of 8
P2
P2 AIRWAVE® - 4600
• Exclusive easy-breathing wave design• Less resistance, better breathability• Designed to protect against mechanical
and thermally generated particulates• SmartStrap allows respirator to hang
around the neck
CODE 411307 Box of 10
P2
P2 VALVED RESPIRATOR - 2300
• P2 class filter designed to protect against mechanical and thermally generated particulates
• Exhalation valve reduces hot air build up and breathing resistance
CODE 405359 Box of 10 405187 Locker of 5
P2
P2 + NUISANCE ORGANIC VAPOURS VALVED RESPIRATOR - 2400
• Suitable for welding • Exhalation valve reduces hot air build up
and breathing resistance
CODE 405361 Bag of 10
P2 VALVED RESPIRATOR - 2315
• Premium Welding P2 class particulate filter • Exhalation valve reduces hot air build up
and breathing resistance • Adjustable straps
CODE 405360 Box of 10
P2
P2 VALVED RESPIRATOR - 2500
• P2 class particulate filter with added sorbent for nuisance levels of acid gas
• Exhalation valve reduces hot air build up and breathing resistance
CODE 405362 Bag of 10
P2
P2 AIRWAVE® RESPIRATOR - 4200
• Exclusive easy-breathing wave design• Less resistance,
better breathability
CODE 407820 Box of 10
P2 + NUISANCE ORGANIC VAPOURS VALVED RESPIRATOR - 2800
• HandyStrap allows respirator to hang around the neck
• Exhalation valve reduces hot air build up and breathing resistance
CODE 405366 Box of 10 404223 Locker of 4 with carbon
P2
P2 P2
NON VALVED RESPIRATORS
VALVED RESPIRATORS
P2 PARTICULATE RESPIRATOR - 2200
• P2 class particulate filter designed to protect against mechanical and thermally generated particulates
CODE 405358 Box of 20 405186 Respirator Locker® of 5
P2 P2
P2 FASTFIT® FLAT FOLD RESPIRATOR
• P2 class filter • Quick and easy to put on• Individually packaged for hygiene• Moulded nose bridge with soft foam nose
cushion increases comfort and seals easily without a metal noseband
CODE 407265 Box of 20
P2 HANDY STRAP RESPIRATOR - 2600
• P2 class filter designed to protect against mechanical and thermally generated particulates
• HandyStrap allows respirator to hang around the neck
CODE 405363 Box of 15
P2
P2
P2 VALVED RESPIRATOR - 2700
• P2 class filter compliance• HandyStrap allows respirator to hang
around the neck• Exhalation valve reduces hot air build up
and breathing resistance
CODE 405364 Box of 10 404223 Locker of 4
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
RE
SP
IRA
TO
RY
PR
OT
EC
TIO
N
90
D I S P O S A B L E R E S P I R A T O R SD I S P O S A B L E R E S P I R A T O R S
CUPPED PARTICULATE RESPIRATORS 8000 SERIES
• Lightweight construction for added comfort that may increase wearer time
• Adjustable nose clip helps reduce eyewear fogging
• Complies with AS/NZS 1716:2012
Applications: Sawing, tree lopping, grinding (P1) and composting, handling infected animals, light soldering (P2)
FLAT FOLD PARTICULATE RESPIRATORS 9300 SERIES
• Unique 3-panel design fits a wide range of face sizes
• Proprietary 3M™ Cool Flow™ valve helps to reduce heat and moisture build-up for a cooler and drier wear (9312 & 9322)
• Individually packaged for easy storage and dispensing
• Complies with AS/NZS 1716:2012
Applications: Feeding livestock, concrete cutting, earth moving (P1) and light welding, infection control, cleaning animal sheds (P2)
CUPPED PARTICULATE RESPIRATORS 8300 SERIES
• Super-soft cushioned inner lining for added worker comfort
• Robust shell construction for durability• Proprietary 3M™ Cool Flow™ valve helps
to breathe easier during prolonged wear (8312 & 8322)
• Complies with AS/NZS 1716:2012
Applications: Wood chopping, pottery/ceramics, drilling (P1) and ship building, foundries, road tunneling (P2)
CLASSIC RANGE COMFORT PLUS FLAT FOLD RANGE
COMFORT PLUS CUPPED RANGE
CODE 406269 8310 P1 Non-Valved Box of 10CODE 405571 9310 P1 Non-Valved Box of 20CODE 405569 8710 P1 Non-Valved Box of 20
P1P1 P1
CODE 406270 8312 P1 Valved Box of 10 CODE 405572 9312 P1 Valved Box of 10CODE 405570 8812 P1 Valved Box of 10
P1P1 P1
CODE 406267 8320 P2 Non-Valved Box of 10CODE 405573 9320 P2 Non-Valved Box of 20CODE 405565 8210 P2 Non-Valved Box of 20
P2P2 P2
CODE 406268 8322 P2 Valved Box of 10CODE 405574 9322 P2 Valved Box of 10CODE 405660 8822 P2 Valved Box of 10
P2P2 P2
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
RE
SP
IRA
TO
RY
PR
OT
EC
TIO
N
91
D I S P O S A B L E R E S P I R A T O R SD I S P O S A B L E R E S P I R A T O R S
WELDING RESPIRATORS, P2
• For welding application to provide protection from ozone and welding fumes
• Low profile design allows compatibility with welding shields
• Flame retardant, cake resistant filter media reduces caking of particles on filter surfaces
• Proprietary 3M™ Cool Flow™ valve helps to remove exhaled air and minimises risk of misting eyewear
• 8514 has activated carbon layer to filter out ozone and nuisance levels* of organic vapour
• Complies with AS/NZS 1716:2012
Applications: Welding - MIG, TIG, metal fumes
SPECIALTY RESPIRATORS
P2
P2 P1
P1
PARTICULATE RESPIRATORS WITH NUISANCE LEVEL* ORGANIC VAPOUR RELIEF, P2
• Activated carbon layer reduces exposure to odours and organic vapours at levels below workplace exposure standard
• 9542A - Folded design for easy storage and dispensing. Individually wrapped to protect from contamination prior to use
• 9923V - 3M™ Cool Flow™ exhalation valve helps to reduce heat and moisture build up. Non aluminium nose clip specifically for use in flammable atmosphere e.g. underground application.
Applications: Protects against diesel particulate matter, unburned fuel vapours, welding and lead fumes
PARTICULATE RESPIRATORS WITH NUISANCE LEVEL* ACID GAS RELIEF, P1
• Robust shell maintains its shape during wear• Provides protection from nuisance levels*
of acid gases, such as, sulphur dioxide and hydrogen fluoride
• Proprietary 3M™ Cool Flow™ valve helps to reduce heat and moisture build-up in hot and humid working environment (9916)
• Complies with AS/NZS 1716:2012
Applications: Aluminium smelting, fertiliser production, chemical product and laboratories.
PARTICULATE RESPIRATORS WITH NUISANCE LEVEL* ORGANIC VAPOUR RELIEF, GP1
• Activated carbon layer provides protection against nuisance levels* of organic vapours and odours
• Type ‘G’ class rating is suitable for low vapour pressure** of many agricultural chemicals, e.g. pesticide & herbicide
• Galvanised steel nose clip allows use in flammable atmosphere e.g. underground application
• Complies with AS/NZS 1716:2012
Applications: Metal processing, foundry operations, waste disposal and recycling
Makes breathing more comfortableThe 3M™ Cool Flow™ valve is designed to release your hot, humid exhaled breath quickly, helping to prevent heat build-up inside the respirator which can be a significant cause of discomfort to wearers.
The cooler thermal imaging shades of the picture on the left indicate how the respirator fitted with the Cool Flow valve expels the breath, together with its natural heat, more rapidly. As the hot exhaled air exists through the valve, the rest of the respirator remains cooler and more comfortable.
This makes Cool Flow valved respirators ideal for long periods of wear, especially where conditions are hot, humid or physically demanding.
3M™ COOL FLOW™ VALVE
COOLER < > HOTTER
Left: 3M™ Particulate Respirator 8511, N95, with the Cool Flow valve (similar to 3M 8322). Right: 3M™ Particulate Respirator 8510, N95, unvalved (similar to 3M 8320).
CODE 405577 9915 P1 Non-Valved Box of 15 CODE 409062 9542A Non-Valved Box of 25
CODE 409422 9923V P2 Valved Box of 10 CODE 405578 9916 P1 Valved Box of 10
CODE 405566 8512 P2 Valved Box of 10
CODE 405567 8514 P2 Valved Box of 10
CODE 405575 9913 GP1 Non-Valved Box of 15
CODE 405576 9913V GP1 Valved Box of 10
GP1
GP1
P2
P2
P2
AURA™ RESPIRATOR 9422+, P2
• Designed specifically for the food and beverage manufacturing industry
• No staples or small detachable parts• Highly visible and metal-detectable• Class P2 protection against dusts, mists,
smoke and fumes
CODE 410182 9422+ P2 Valved Box of 10
FOOD MANUFACTURINGMETAL DETECTABLE
*Nuisance levels are those levels below the Workplace Exposure Standard (WES)** Low vapour pressure below 1.3Pa at 25˚C
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
R E S P I R A T O R Y P R O T E C T I O NR
ES
PIR
AT
OR
Y P
RO
TE
CT
ION
92
D I S P O S A B L E R E S P I R A T O R S
5111 & 5211
A P1 and a P2 protection full feature premium cup shape respirator suggested for use with particulate aerosols free of oil• Willtech® boomerang strip nose seal
provides better comfort• An exhalation valve for hot workplaces or
simply for easier breathing
CODE 405382 P1 Valved box of 20 405385 P2 Valved box of 20
5141
P1 protection premium cup respirator with exhalation valve and charcoal filter for organic vapour nuisance odour relief.• Willtech® boomerang nose seal provides
better wearer comfort• Has a charcoal layer, which provides relief
from nuisance levels of organic vapours and odours
CODE 405383 P1 Valved box of 20
P1 SUPERONE RESPIRATOR
• Pre formed upper part of masks ensures excellent fit & leak tightness
• Large Inner volume offers comfort and increased communication
• Crush resistant• Fits all facial profiles and sizes• Welded Straps ensure a more comfortable
respirator - no staples to scratch face
Applications: for protection against dusts and mists P1
CODE 407261 P1 Non-valved box of 20 407262 P1 Valved box of 20
5261
• P2 premium cup shape respirator• Shaped for better fit with eyewear• Low breathing resistance• Humidity resistant and hypoallergenic
filter media• Latex-free suspension straps,
no pre-stretching• Staples do not penetrate filter medium• Willtech® boomerang nose seal• Flame retardant outer shell• Exhalation valve for hot or humid workplaces• Charcoal layer provides relief from nuisance
levels of acid gases and odour relief
CODE 407821 P2 Valved box of 20
SUPERONE P2
• Pre formed upper part of masks ensures excellent fit and leak tightness
• Large Inner volume offers comfort and increased communication
• Crush resistant• Fits all facial profiles and sizes• Welded straps ensure a more comfortable
respirator - no staples to scratch face• Valve provides increased comfort in hot
and dusty work environments• Certified to AS /NZS 1716:2012
Applications: for protection against dusts, mists and fume P2
CODE 405580 P2 Non-valved box of 20 405554 P2 Non-valved pack of 5 405579 P2 Valved box of 20 405555 P2 Valved pack of 3
5251
P2 premium cup shape respirator with a high protection polo seal and charcoal layer filter for nuisance level organic vapour odour relief• Willtech® polo seal provides better
wearer comfort• Charcoal layer provides relief from
nuisance levels of organic vapours eg. ozone welding
CODE 405386 P2 Valved box of 5
P2
P2
P2
P1 P1
P1
P2