ResNAC Installation for Windows XP 1

ResNAC Installation for Windows XP

Before you start

1 Uninstall McAfee Antivirus and the RSClient

Option 1: Once the network cable has been connected to the PC. Open a command prompt and check with ipconfig, your IP address. If you have a 10.94.X.X address you are on the remediation network and you can run http://10.94.12.5/MSE/clean.exe

Option 2 Download the removal tool (clean.exe) on a USB device and run on the PC ftp://ftp.puk.ac.za/Hulplyn/NAC-SE/clean.exe

You are now ready to continue

Open a Browser and go to http://www.nwu.ac.za. The following should be displayed momentarily:

Information Technology

ResNAC Installation for Windows XP 2

The following should then be displayed. Click on “Agree” to continue:

Click “Start>>” to Continue:

ResNAC Installation for Windows XP 3

Provide your University Number and Password and click “Click to Continue”:

The connection will be set up. Please be patient.

ResNAC Installation for Windows XP 4

Please close and reopen your Browser when prompted.

The isolation/remediation messages will appear for a few seconds:

ResNAC Installation for Windows XP 5

The following will then be displayed. Click “NWU Persistent Security Policy” to continue:

Click “Click to Continue” when prompted on the WELCOME page

ResNAC Installation for Windows XP 6

Save the Agent on the Desktop for easy access:

Open Windows explorer and execute the file. It may prompt. Click Run to execute:

Follow the screens and click Next until the installation completes with “Finish”

ResNAC Installation for Windows XP 7

The Bradford Agent will check the pc for Security Essentials compatibility. If compliant, the pc will be online and connected to the LAN.

ResNAC Installation for Windows XP 8

Close and re-open your Browser. If not compliant, the following will happen. Click “NWU-Persistent-Security-Policy again:

Security Essentials must be installed and up to date. Click on the top link:

ResNAC Installation for Windows XP 9

Save and then open/run from Windows Explorer:

Always accept any security prompts that may appear during execution and also follow the messages displayed in the dos windows that will appear. Wait for installation to finish.

Click “Rescan”. Click the link to continue:

Save and open/run from Windows Explorer:

Again follow messages displayed in the dos windows that will appear.

ResNAC Installation for Windows XP 10

Afterwards click Rescan on the webpage. The following will appear:

Windows XP should now be registered on the network and have full access. Click “Ok” and close/ reopen your Browser:

You should be able to access: http://www.nwu.ac.za and browse as desired:

Finish.

Updated: 09-03-2012

ResNAC Installation for Windows XP 11